- dovecot - dovecot.org

[Dovecot] Dovecot + qmail-ldap
by Aydın Demirel 13 Jun '11

13 Jun '11

Hi; I installed latest dovecot version (2.0.13) and qmail pathed with qmail-ldap on our systems. We want to use auth_dovecot binary authentication for dovecot. My dovecot config is following: auth_debug = yes auth_debug_passwords = yes auth_verbose = yes base_dir = /var/run/dovecot disable_plaintext_auth = no first_valid_gid = 100 first_valid_uid = 100 last_valid_gid = 65000 last_valid_uid = 65000 listen = * mail_debug = yes mail_location = maildir:~/Maildir mmap_disable = yes protocols = imap pop3 service auth { executable = /opt/surmail/smtp/bin/auth_dovecot ./Maildir unix_listener auth-userdb { group = qmail user = root } } service imap-login { inet_listener imap { port = 143 } } service pop3-login { inet_listener pop3 { port = 110 } } ssl = no verbose_proctitle = yes But, unfortunately I can not connect port 110 via telnet and i'm getting following error: Jun 13 17:11:43 sms dovecot: master: Error: service(auth): child 31580 returned error 111 Jun 13 17:11:43 sms dovecot: master: Error: service(auth): command startup failed, throttling What can be the problem? Regards.. -------------------------------- *Aydin Demirel Endersys Ltd. Sistem Destek Muhendisi / System Support Engineer * Phone : +90 216-4709423 Fax : +90 216-4709508 | Web : http://www.endersys.com.tr <http://www.endersys.com.tr/> Blog : http://blog.endersys.com <http://blog.endersys.com/> Twitter : http://www.twitter.com/endersys LPI : The #1 Linux Certification for IT Professionals LPI (Linux Professional Institute) Turkey http://www.lpi-turkey.com <http://www.lpi-turkey.com/> Endersys is the first Advanced Business partner of Red Hat in Turkey ! http://www.europe.redhat.com/partners/endersys/

1 0

[Dovecot] Dovecot 2.0+LMTP: Legal MAIL FROM rejected?
by Bernhard Schmidt 13 Jun '11

13 Jun '11

Hi, I run Dovecot 2.0.13 fed by Postfix over LMTP. Today it rejected one mail Postfix and Amavis accepted, generating a bounce. It was just a spammail, but I think the sender address is legal according to RFC5321 and should be accepted. I don't like generating bounces, email should be either rejected by postfix/pre-queue-amavis or delivered. Jun 6 12:32:47 mail postfix/qmgr[840]: 991FC240DB: from=<admin <admin(a)kl38000.com>, size=8427, nrcpt=1 (queue active) Jun 6 12:32:47 mail amavis[27046]: (27046-06) FWD via SMTP: <"admin <admin"@kl38000.com> -> <user(a)domain.com>,BODY=7BIT 250 2.0.0 Ok, id=27046-06, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as 991FC240DB Jun 6 12:32:47 mail postfix/lmtp[4710]: 991FC240DB: to=<user(a)vmail.domain.com>, orig_to=<user(a)domain.com>, relay=pop3.domain.com[::1]:24, delay=0.24, delays=0.09/0.11/0.03/0.01, dsn=5.5.4, status=bounced (host pop3.domain.com[::1] said: 501 5.5.4 Invalid parameters (in reply to MAIL FROM command)) It looks like dovecot/lmtp does not accept an address with quoted localpart that contains a space mail from:<"admin admin"@kl38000.com> 501 5.5.4 Invalid parameters mail from:<"adminadmin"@kl38000.com> 250 2.1.0 OK mail from:<"admin<admin"@kl38000.com> 250 2.1.0 OK Bernhard

2 1

Re: [Dovecot] Using Dovecot new version 2.0.13 facing issues.
by गौरव जोशी 13 Jun '11

13 Jun '11

> Hi, > > I have configured POP-IMAP server with dovecot 2.0.13 with mysql support. > When I am running load test on the same I face issue on IMAP connections. I > get "dovecot: imap-login: Error: fd_send(imap, 15) failed: Interrupted > system call" followed by "dovecot: imap-login: Internal login failure" in > log files. See if these patches help: http://hg.dovecot.org/dovecot-2.0/rev/86e4023d08e4 http://hg.dovecot.org/dovecot-2.0/rev/6fdee880c5dc Hi Timo, Thanks for the response. The first patch is not getting compiled, where the other one got complied cleanly. Please help on this. Have a nice time, Gourav Joshi Have a look at www.linuxquestions.in

2 1

[Dovecot] Regarding Digest-MD5 auth
by kenja heramba 13 Jun '11

13 Jun '11

Hi, I am writing a Pop3Client. I use dovecot server as POP3 server in linux and hMailServer in windows. I was just testing digest-md5 auth with dovecot server. I had an observation. After server side verification, server sends a verification code to client. If this fails, how can client send the negative response or does it not exist? When I see packet capture, dovecot server sends +OK Logged in for anything client sends. I may be wrong. Please let me know your thoughts Regards, Heramba

2 1

[Dovecot] sqlite quota dict
by Nikita Koshikov 13 Jun '11

13 Jun '11

Hello Timo, and list followers, Sqlite supports good feature like mysql 'ON DUPLICATE KEY UPDATE' - it calls REPLACE/INSERT OR REPLACE This clause can be added to INSERT query, like: INSERT OR REPLACE INTO table VALUES() REPLACE INTO table VALUES() // alias to previous one Also this can be done during CREATE TABLE syntax, like so: CREATE TABLE quota ( username text not null, bytes integer not null default 0, messages integer not null default 0, primary key (username) ON CONFLICT REPLACE ); So the examples will work: INSERT INTO quota (bytes,username) VALUES ('112497180','foo(a)spam.dom'); INSERT INTO quota (bytes,username) VALUES ('112497181','foo(a)spam.dom'); SELECT * FROM quota; foo(a)spam.dom|112497181|0 But 1 thing to note - if we updating not all fields and column has NOT NULL DEFAULT value, then DEFAULT value will alter current one: INSERT INTO quota (bytes,username) VALUES ('112497180','foo(a)spam.dom'); INSERT INTO quota (messages,username) VALUES ('1743','foo(a)spam.dom'); SELECT * FROM quota; foo(a)spam.dom|0|1743 This can be easily bypassed if INSERT will be: INSERT INTO quota (bytes,messages,username) VALUES ('112497180','1743','foo(a)spam.dom'); So if dovecot will INSERT values to sql dict in this manner, sqlite can be used for storing quota data.

2 1

[Dovecot] virtual users with postfix+dovecot plugin usage question
by Denis Iskandarov 13 Jun '11

13 Jun '11

I'm interested in if i should enable plugins only in LDA as i understood that with postfix dovecot works only like LDA. For example i wanna use autocreate plugin for imap user i have enabled in both IMAP and LDA sections. Is it right or i had to configure it only in LDA section ? Than how quota and imap_quota work in imap section ? For what is it there if lda controls user maildirs ? Dovecot 2.0.13 protocol lda { mail_plugins = quota autocreate } protocol imap { imap_client_workarounds = delay-newmail mail_plugins = quota imap_quota autocreate } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh }

1 0

[Dovecot] Question about Dovecot-ACLs
by Jan Phillip Greimann 13 Jun '11

13 Jun '11

Hi there, i try to create an php-script to control acl's for public folders without file-manipulation. For this i use imap_setacl() like this example: imap_setacl($mbox,"INBOX/test", "email(a)domain.tld", "lrwstipekxa"); The acl-file looks so: ~:> cat dovecot-acl user=email(a)domain.tld akxeilprwts But i have a problem with the follow function: imap_setacl($mbox,"INBOX/test", "email(a)domain.tld", ""); This command only delete the rights from the email, not the whole entry in my dovecot-acl file. Now my acl-file looks like this: ~:> cat dovecot-acl user=email(a)domain.tld Did this affect dovecot by any way? Thanks, Jan

2 1

[Dovecot] dovecot auth server problem PAM handshake imap-login
by emc 13 Jun '11

13 Jun '11

Hi, i have a big problem with dovecot... PAM auth problem i guess, but don't know how to sort it out... Down the log and the dovecot.conf. Please soemone can tell me what's broken there? Thanks a lot ************************* HERE log ************************* Jun 9 14:49:46 vps dovecot: pop3-login: Can't connect to auth server at default: Resource temporarily unavailable Jun 9 14:49:46 vps dovecot: imap-login: Timeout waiting for handshake from auth server. my pid=14681, input bytes=0 Jun 9 14:49:46 vps dovecot: imap-login: Can't connect to auth server at default: Resource temporarily unavailable Jun 9 14:49:46 vps dovecot: imap-login: Timeout waiting for handshake from auth server. my pid=14681, input bytes=0 Jun 9 14:49:46 vps dovecot: imap-login: Timeout waiting for handshake from auth server. my pid=14682, input bytes=0 ************************* HERE my doveconf -a ************************* # 1.0.15: /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot log_path: info_log_path: log_timestamp: %Y-%m-%d %H:%M:%S syslog_facility: mail protocols: imap pop3 imaps pop3s listen: ssl_listen: ssl_disable: no ssl_ca_file: ssl_cert_file: /etc/ssl/certs/dovecot.pem ssl_key_file: /etc/ssl/private/dovecot.pem ssl_key_password: ssl_parameters_regenerate: 168 ssl_cipher_list: ssl_verify_client_cert: no disable_plaintext_auth: no verbose_ssl: no shutdown_clients: yes nfs_check: yes version_ignore: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_user: dovecot login_greeting: Dovecot ready. login_log_format_elements: user=<%u> method=%m rip=%r lip=%l %c login_log_format: %$: %s login_process_per_connection: yes login_chroot: yes login_greeting_capability: no login_process_size: 64 login_processes_count: 3 login_max_processes_count: 128 login_max_connections: 256 valid_chroot_dirs: mail_chroot: max_mail_processes: 1024 verbose_proctitle: no first_valid_uid: 500 last_valid_uid: 0 first_valid_gid: 1 last_valid_gid: 0 mail_extra_groups: mail_access_groups: mail_privileged_group: man default_mail_env: mail_location: mbox:~/mail/:INBOX=/var/mail/%u mail_cache_fields: flags mail_never_cache_fields: imap.envelope mail_cache_min_mail_count: 0 mailbox_idle_check_interval: 30 mail_debug: yes mail_full_filesystem_access: no mail_max_keyword_length: 50 mail_save_crlf: no mail_read_mmaped: no mmap_disable: no mmap_no_write: no dotlock_use_excl: no fsync_disable: no lock_method: fcntl maildir_stat_dirs: no maildir_copy_with_hardlinks: no maildir_copy_preserve_filename: no mbox_read_locks: fcntl mbox_write_locks: fcntl mbox_lock_timeout: 300 mbox_dotlock_change_timeout: 120 mbox_min_index_size: 0 mbox_dirty_syncs: yes mbox_very_dirty_syncs: no mbox_lazy_writes: yes dbox_rotate_size: 2048 dbox_rotate_min_size: 16 dbox_rotate_days: 1 umask: 63 mail_drop_priv_before_exec: no mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_process_size: 256 mail_plugins: mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_log_prefix: %Us(%u): mail_log_max_lines_per_sec: 10 imap_max_line_length: 65536 imap_capability: imap_client_workarounds: outlook-idle pop3_no_flag_updates: no pop3_enable_last: no pop3_reuse_xuidl: no pop3_lock_session: no pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds: pop3_logout_format: top=%t/%p, retr=%r/%b, del=%d/%m, size=%s managesieve_max_line_length: 65536 managesieve_implementation_string: dovecot sieve_storage: sieve: auth default: mechanisms: plain login realms: default_realm: cache_size: 0 cache_ttl: 3600 executable: /usr/lib/dovecot/dovecot-auth user: root chroot: username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ username_translation: username_format: master_user_separator: anonymous_username: anonymous krb5_keytab: gssapi_hostname: verbose: no debug: yes debug_passwords: no ssl_require_client_cert: no ssl_username_from_cert: no count: 1 worker_max_count: 30 process_size: 256 passdb: driver: pam args: session=yes dovecot deny: no pass: no master: no userdb: driver: passwd args: --------------------------

3 4

[Dovecot] auth_cache question
by Robert Schetterer 13 Jun '11

13 Jun '11

Hi , just to make clear short question does auth_cache... help with downing sql lookups http://wiki2.dovecot.org/Authentication/Caching isnt clear to me for sql to me if yes are there real world recommanded settings lets say for a 5000 users server and where password changes should be noticed asap -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 1

[Dovecot] Dovecot 1.2 + Sieve-0.1.19 not working please help
by Denis Iskandarov 13 Jun '11

13 Jun '11

Hello i have installed dovecot from rpm found on rpm.pbone.net 1.2.17-0_115.el5 Everuthing works as charm Postfix + Dovecot + TLS + MySQL/postfixadmin For Reference: Centos 5.6 postfix 2.3.3-2.2 dovecot 1.2.17-0_115.el5 spamassassin 3.2.5-1.el5 postfixadmin 2.3.3 amavisd-new 2.6.4-4.el5.rf Now i'm trying to install Sieve for Dovecot 1.2 to make it redirect spam in proper folders but getting next error: ./configure --with-dovecot=/usr/lib/dovecot/ #OMITED OUTPUT# dovecot-config not found from /usr/lib/dovecot, use --with-dovecot=PATH to give path to compiled Dovecot sources or to a directory with the installed dovecot-config file. configure: error: dovecot-config not found /usr/lib/dovecot/ - is dir where all plugins and other things are stored. /etc is dir where dovecot.conf is located /etc/dovecot is dir where i put dovecot sql config Please help. I have no idea how to fix this. Especially when everything seems to be working as charm. My thread on LQ.org http://www.linuxquestions.org/questions/showthread.php?p=4381803&posted=1#p… dovecot -n # 1.2.17: /etc/dovecot.conf # OS: Linux 2.6.18-238.9.1.el5 i686 CentOS release 5.6 (Final) ext3 base_dir: /var/run/dovecot/ listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(pop3): *:995 ssl_ca_file: /etc/pki/tls/cacert.pem ssl_cert_file: /etc/pki/tls/dev.cdn/cent56.dev.cdn.crt ssl_key_file: /etc/pki/tls/dev.cdn/cent56.dev.cdn.key ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot//login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login first_valid_uid: 1001 last_valid_uid: 1001 first_valid_gid: 12 last_valid_gid: 12 mail_location: maildir:/var/vmail/%d/%u mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: postmaster(a)dev.cdn mail_plugins: quota autocreate mail_plugin_dir: /usr/lib/dovecot/lda log_path: /var/log/dovecot/dovecot-deliver.log info_log_path: /var/log/dovecot/dovecot-deliver.log auth default: mechanisms: plain login user: nobody passdb: driver: pam passdb: driver: sql args: /etc/dovecot/sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/sql.conf userdb: driver: prefetch socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail

2 2

[Dovecot] Dovecot sieve redirect: failed to redirect message to user@domain.com
by Thiago Henrique 13 Jun '11

13 Jun '11

Hello, I'm running Dovecot 2.0.13 on my Ubuntu10.04. It's working very well but I faced a problem with Redirect and Vacation using Sieve. :-( In fact, after well configuring the system I dont't receive the redirect message, and in the log I found: ######################################################################################## Jun 9 18:49:37 box7 dovecot: lmtp(10734, user(a)server.com) Fatal: execv(/usr/sbin/sendmail) failed: Permission denied Jun 9 18:49:37 box7 dovecot: lmtp(10734, user(a)server.com) Error: Sendmail process terminated abnormally, exit status 84 Jun 9 18:49:37 box7 dovecot: lmtp(10734, user(a)server.com) Error: At35JIgC8U3uKQAAndgVeA: sieve: msgid=<20110609184850.0FAB8200A41C(a)domain.com>: failed to redirect message to <user-destination(a)server.com> (refer to server log for more information) ######################################################################################## In sieve.log I see: ######################################################################################## error: msgid=<2011060919.0200A375(a)domain.com>: failed to redirect message to <user(a)domain.com> (refer to server log for more information). ######################################################################################## Manually sendmail command works normally. Cron sends email normally. Any idea about the reason this happen and how to solve? Thanks in advance, Thiago Henrique

3 2

[Dovecot] Loading Message Delays
by Ken Mandelberg 13 Jun '11

13 Jun '11

I sometimes see "loading message" or "opening Inbox" delays against both 1.X and 2.X Dovecot servers from thunderbird. Is there some way to pin down whats causing them?

2 1

[Dovecot] mmap in GFS2 on rhel 6.1
by Aliet Santiesteban Sifontes 13 Jun '11

13 Jun '11

Hello list, we continue our tests using Dovecot on a RHEL 6.1 Cluster Backend with GFS2, also we are using dovecot as a Director for user node persistence, everything was ok until we started stress testing the solution with imaptest, we had many deadlocks, cluster filesystems corruptions and hangs, specially in index filesystem, we have configured the backend as if they were on a NFS like setup but this seems not to work at least on GFS2 on rhel 6.1. We have a two node cluster sharing two GFS2 filesystem - Index GFS2 filesystem to store users indexes - Mailbox data on a GFS2 filesystem The specific configs for NFS or cluster filesystem we used: mmap_disable = yes mail_fsync = always mail_nfs_storage = yes mail_nfs_index = yes fsync_disable=no lock_method = fcntl mail location : mail_location = mdbox:/var/vmail/%d/%3n/%n/mdbox:INDEX=/var/indexes/%d/%3n/%n But this seems not to work for GFS2 even doing user node persistence, maillog is plagged of errors and GFS2 hangs on stress testing with imaptest, many corrupted index for example, transaction logs etc, at this point we have many questions, first mmap... In Redhat GFS2 docs we read: Gold rules for performance: An inode is used in a read only fashion across all nodes An inode is written or modified from a single node only. We have succesfull archived this using dovecot director Now, for mmap rh says: ... If you mmap() a file on GFS2 with a read/write mapping, but only read from it, this only counts as a read. On GFS though, it counts as a write, so GFS2 is much more scalable with mmap() I/O... But in our config we are using mmap_disable=yes, do we have to use mmap_disable=no with GFS2??? Also, how dovecot manage the cache flush on GFS2 filesystem??? Why, if we are doing user node persistence, dovecot indexes gets corrupted??? What lock method do we have to use?? How fsync should be used?? We know we have many questions, but this is really a very complex stuff and we are going to appreciate any help you can give us. Thank you all for a great work, specially Timo... best regards

3 3

[Dovecot] Unable to compile --with-mysql on Solaris
by Jesse Reynolds 13 Jun '11

13 Jun '11

Hello I'm hoping someone can give me a pointer as to how to compile Dovecot with MySQL support on Solaris. I am trying to compile dovecot 2.0.13 (also tried 2.0.9) on Solaris (OpenSolaris 2009-06, snv_111b) with the OpenSolaris provided MySQL 5.1.30 under /usr/mysql. The server is a Sun X2100 M2, which has a dual core AMD Opteron processor (amd64). Running "./configure --with-mysql" stops here: ... checking for mysql_config... mysql_config checking for mysql_init in -lmysqlclient... no configure: error: Can't build with MySQL support: libmysqlclient not found the libmysqlclient.so is to be found here: /usr/mysql/5.1/lib/mysql/ or for the amd64 version: /usr/mysql/5.1/lib/amd64/mysql/ And include is at: /usr/mysql/5.1/include/ I have tried various combinations of things in CFLAGS, CPPFLAGS and LDFLAGS, but it doesn't change the configure error above at all. Eg: export CPPFLAGS="-I/usr/mysql/5.1/include/mysql" export CFLAGS="-I/usr/mysql/5.1/include/mysql" export LDFLAGS="-R/usr/mysql/5.1/lib/amd64/mysql -L/usr/mysql/5.1/lib/amd64/mysql" ./configure --prefix=/opt/dovecot --with-ldap --with-mysql Looking at config.log this section seems relevant: configure:22993: checking for mysql_config configure:23009: found /usr/mysql/bin/mysql_config configure:23021: result: mysql_config configure:23055: checking for mysql_init in -lmysqlclient configure:23080: gcc -o conftest -std=gnu99 -I/usr/mysql/5.1/include/mysql -Wall -W -Wmissing-prototypes -Wmissin g-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/mysql/5.1/include/mysql -R /usr/mysql/5.1/lib/amd64/mysql -L/usr/mysql/5.1/lib/amd64/mysql conftest.c -lmysqlclient -lnsl -lsocket -lrt -l sendfile -L/opt/SUNWspro/lib -lCrun -lrt -L/usr/mysql/5.1/lib/mysql -R/usr/mysql/5.1/lib/mysql -lmysqlclient -lz -lgen -lsocket -lnsl -lm -lz -lm >&5 ld: fatal: library -lCrun: not found ld: fatal: file processing errors. No output written to conftest collect2: ld returned 1 exit status configure:23080: $? = 1 configure: failed program was: | /* confdefs.h */ ...snip... configure:23089: result: no configure:23198: error: Can't build with MySQL support: libmysqlclient not found Note, I have not installed the Sun C compiler, so am compiling with gcc (/usr/bin/gcc 3.4.3). gmake is at /usr/bin/gmake and sun make is at /usr/bin/make. Perhaps I would more more luck with Sun's C compiler? Thank you Jesse -- Jesse Reynolds Carbon Planet Limited - http://www.carbonplanet.com/ Virtual Artists Pty Ltd - http://www.va.com.au/

1 1

[Dovecot] thunderbird not receiving new incoming mail: Timeout while waiting for lock for transaction log file
by Noah Garrett Wallach 12 Jun '11

12 Jun '11

Hi there, I am running dovecot 1.0.10 and thunderbird 3.1.10 for OSX 10.6.7 and I am finding that new imap mail is not coming into my INBOX folder on thunderbird. there is an error message "Timeout while waiting for lock for transaction log file" in the syslog here is my INBOX .imap dir ~/mail/.imap/INBOX$ ls -l total 75100K -rw------- 1 blah blah 1462024 Jun 11 20:17 dovecot.index -rw------- 1 blah blah 75153408 Jun 11 20:17 dovecot.index.cache -rw------- 1 blah blah 1464 Jun 11 20:17 dovecot.index.log -rw------- 1 blah blah 195812 Jun 11 17:23 dovecot.index.log.2 what is the best way to troubleshoot this problem? what else can I look at? Cheers, Noah

3 2

Re: [Dovecot] postfix dovecot spamassassin question
by Dhaval Patel 12 Jun '11

12 Jun '11

So I setup amavis-new and configured postfix/spamassassin/amavis. Mail is still delivered properly but I do not see the spamassassin info in the headers of the email. I configured amavis-new and set "sa_tag_level_deflt" to -999 so that it would always show up but no luck. I updated the spamassassin config and enabled it. I also tested spamassassin manually running "spamassassin -t < someemail" and that returns the email with the X-Spam in the headers. If this is not the correct place to ask, I apologize. Please direct me where I can find the answer. Thanks, Dhaval Simone Caruso <info(a)simonecaruso.com> wrote: >On 11/06/2011 18:53, Dhaval Patel wrote: >> I have an old server with postfix -> maildrop -> spamassassin -> courier setup. >> I am installing a new server and would like to use dovecot instead of courier. >> Currently I have postfix -> dovecot lda -> dovecot setup and emails are >> delivered as expected. The problem is that I do not know how to get spamassassin >> integrated into the mix since I am using the dovecot lda rather than maildrop. > >The simplest, and maybe fastest, is to use amavis-new as postfix contentfilter. > > >-- >Simone Caruso >IT Consultant >+39 349 65 90 805 >p.iva: 03045250838

2 1

[Dovecot] postfix dovecot spamassassin question
by Dhaval Patel 11 Jun '11

11 Jun '11

I have an old server with postfix -> maildrop -> spamassassin -> courier setup. I am installing a new server and would like to use dovecot instead of courier. Currently I have postfix -> dovecot lda -> dovecot setup and emails are delivered as expected. The problem is that I do not know how to get spamassassin integrated into the mix since I am using the dovecot lda rather than maildrop. I would rather keep things as simple as possible and not use maildrop + sendmail just to use spamassasin but will if I have to. So my question to the list is, how do you recommend me doing this? Are there any documentation, howtos or tutorials which can help me configure this? Below is the output of dovecot -n Thanks, Dhaval ------------dovecot -n--------------- # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686-bigmem i686 Debian 6.0.1 xfs log_timestamp: %Y-%m-%d %H:%M:%S ssl_cert_file: /etc/ssl/certs/secure.consoe.com.pem ssl_key_file: /etc/ssl/certs/secure.consoe.com.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:/home/vmail/%u mbox_write_locks: fcntl dotlock namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)patel.sh auth_socket_path: /var/run/dovecot/auth-master log_path: /home/vmail/dovecot-deliver.log mail_plugins: sieve global_script_path: /home/vmail/globalsieverc auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail

2 1

[Dovecot] migration scenario
by Alexandre Chapellon 10 Jun '11

10 Jun '11

Hello, I'd like to know if anybody have an experience with migrating mailboxes from mirapoint mail system to dovecot? If so how was it done and what were the difficulties? regards.

2 1

[Dovecot] Sub-Subfolder from public folders
by Torsten Harenberg 10 Jun '11

10 Jun '11

Dear all, I just moved from an old cyrus instance to a brand new dovecot installation. Everything worked pretty well so far. The only small problem I have is: we have public folders, so I defined namespace { type = public separator = . prefix = public. location = maildir:/var/mail/public:INDEX=%u/public subscriptions = no list = children } And I define ACLs for the folders inside. This works, but the some of these folders have sub-folders and these cannot be seen by (what I have tested is Apple Mail, Thunderbird, Outlook and squirrelmail). File system looks like this: mail# cd /var/mail/public/.icecube-c mail# ls -l .ice* .icecube-hard: total 232 drwxrwxrwx 2 root wheel 512 Jun 9 13:07 cur -rwxrwxrwx 1 root wheel 167 Jun 9 13:07 dovecot-keywords -rwxrwxrwx 1 root wheel 105179 Jun 9 13:07 dovecot-uidlist drwxrwxrwx 2 root wheel 123904 Jun 9 13:07 new drwxrwxrwx 2 root wheel 512 Jun 9 13:07 tmp .icecube-soft: total 2214 drwxrwxrwx 2 root wheel 512 Jun 9 13:06 cur -rwxrwxrwx 1 root wheel 167 Jun 9 13:07 dovecot-keywords -rwxrwxrwx 1 root wheel 1019250 Jun 9 13:07 dovecot-uidlist -rwxrwxrwx 1 root wheel 0 Jun 9 13:06 maildirfolder drwxrwxrwx 2 root wheel 1195008 Jun 9 13:07 new drwxrwxrwx 2 root wheel 512 Jun 9 13:07 tmp mail# ls .icecube-hard .icecube-soft cur dovecot-acl dovecot-keywords dovecot-uidlist new subscriptions tmp Maybe anybody can help with this? Full dovecot -n attached. Thanks again and best regards, Torsten -- <><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><> <> <> <> Dr. Torsten Harenberg harenberg(a)physik.uni-wuppertal.de <> <> Bergische Universitaet <> <> FB C - Physik Tel.: +49 (0)202 439-3521 <> <> Gaussstr. 20 Fax : +49 (0)202 439-2811 <> <> 42097 Wuppertal <> <> <> <><><><><><><>< Of course it runs NetBSD http://www.netbsd.org ><> mail# dovecot -n # 2.0.13: /usr/pkg/etc/dovecot/dovecot.conf # OS: NetBSD 5.1 amd64 ffs auth_debug = yes auth_verbose = yes base_dir = /var/run/dovecot/ mail_debug = yes mail_gid = 6 mail_location = maildir:/var/mail/user/%u/Maildir mail_plugins = acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = . type = private } namespace { list = children location = maildir:/var/mail/public:INDEX=%u/public prefix = public. separator = . subscriptions = no type = public } passdb { args = /usr/pkg/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = dovecot user = dovecot } } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } ssl_cert = </etc/certificates/mail.physik.uni-wuppertal.de.crt ssl_key = </etc/certificates/mail.physik.uni-wuppertal.de.key userdb { args = /usr/pkg/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = sieve } protocol lda { mail_plugins = sieve } protocol imap { mail_plugins = acl imap_acl } protocol sieve { managesieve_implementation_string = Dovecot Pigeonhole }

2 2

[Dovecot] On-delivery deduplication?
by Xin LI 10 Jun '11

10 Jun '11

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hi, A feature of Cyrus-IMAPd I really missed after migrated to Dovecot is their optional "duplicate suppression", which eliminates duplicate message at deliver time, if their envelope sender, recipient and message-id matches. For example, if one subscribes to a mailing list, and someone hit "Reply All" to reply to him, there will be two different SMTP deliveries, one from the replier's server and one from the mailing list. Is it possible to do the same on latest Dovecot? (Looking at the documentation it seems not?) Or is there some better ways to implement the same functionality? Thanks in advance! Cheers, - -- Xin LI <delphij(a)delphij.net> http://www.delphij.net/ FreeBSD - The Power to Serve! Live free or die -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.17 (FreeBSD) iQEcBAEBCAAGBQJN79XjAAoJEATO+BI/yjfBCO0IAMLNZ9Rkargb6bQqILAcbobt 2ZFb6cO8f4vJu/BPO7Dq3TZoIEmfR+/pbruwgV+FSslTL+5TjkB5Rd5Yb+HYgvZT Qdbk8Jshgq1XBj2MvbLQugHKhNcN37oDI9eGCDPttYe/C4Jb2hh1W+RtqGpfS6ud jXUTUzS4yr7HWRRYcyDMvL4HuG/VnKEuFYmX2T/mT8oHfz5FckIPM+k+0prbgMSx IGTdkKpSMnqYnyUjxQklSmMJ5iJMM7Lr6FMS2c6ORKwG8rD0w1GKrU77saHqJJLQ YJqqIwJcr5753US6Q1Rk4gK+/L4JmJ+2BUXDdNMYBIfPOFjH9nOLlE5HIfSskBg= =fo5J -----END PGP SIGNATURE-----

11 22

[Dovecot] possible bug leading to lmtp crashes
by Trever L. Adams 10 Jun '11

10 Jun '11

I have been using Samba 4 kerberos and ldap with dovecot. Samba 4 changed a while back (resulting in me asking for help) which requires kerberos auth for ldap lookups. My setup worked perfectly before hand. Before and after were with dovecot-2.0.11 and the after also happens with 2.0.11. The only changes were (in my ldap.conf for dovecot -- changes are new lines starting with *, * is not in the conf, just showing changes): hosts = example.org base = dc=example,dc=org ldap_version = 3 user_attrs = userPrincipalName=user user_filter = (&(objectClass=person)(|(mail=%u)(sAMAccountName=%u)(userPrincipalName=%u))) *dn = MACHINEACCOUNT$(a)EXAMPLE.ORG *sasl_bind = yes *sasl_mech = GSSAPI *sasl_realm = EXAMPLE.ORG *#sasl_authz_id = MACHINEACCOUNT$(a)EXAMPE.ORG # For using doveadm -A: iterate_attrs = userPrincipalName=user iterate_filter = (objectClass=person) in dovecot.conf: import_environment = TZ KRB5CCNAME=/etc/dovecot/krb5.cc With that do any of the following lines from the referenced hg rev set mean I am missing anything on my import_environment variable? Or is it all good? 10.15 +/* <settings checks> */ 10.16 +#ifdef HAVE_SYSTEMD 10.17 +# define ENV_SYSTEMD " LISTEN_PID LISTEN_FDS" 10.18 +#else 10.19 +# define ENV_SYSTEMD "" 10.20 +#endif 10.21 +#ifdef DEBUG 10.22 +# define ENV_GDB " GDB" 10.23 +#else 10.24 +# define ENV_GDB "" 10.25 +#endif 10.26 +/* </settings checks> */ 10.27 + 10.28 static const struct master_settings master_default_settings = { 10.29 .base_dir = PKG_RUNDIR, 10.30 .libexec_dir = PKG_LIBEXECDIR, 10.31 + .import_environment = "TZ" ENV_SYSTEMD ENV_GDB, If I am not missing anything, then there seems to be a problem with kerberos sasl with ldap lookups. Thank you, Trever Adams Reference: http://hg.dovecot.org/dovecot-2.0/rev/cec7fa92ff48 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=697325 (backtrace via abrtd is included here) -- "Avert misunderstanding by calm, poise, and balance." -- Unknown

2 14

Re: [Dovecot] Error: file_dotlock_create failed: Permission denied
by M. Fioretti 09 Jun '11

09 Jun '11

On Fri, Jun 03, 2011 16:51:06 PM +0300, Timo Sirainen wrote: > > On Wed, 2011-05-25 at 13:49 +0200, M. Fioretti wrote: > > > /home/z/email/marco isn't owned by marco? Alternatively you have SELinux > > enabled, which is preventing this. Yes, it was indeed selinux. I realized it (with help from the fedora list) the day after posting to this one, but then I started to restore other files from the backup and forgot to confirm that this was the problem, sorry. Marco

1 0

[Dovecot] IMAP Label Updates not showing up across shared account
by Ricardo Branco 09 Jun '11

09 Jun '11

Dovecot 2.0.13 Centos 5.4 x86_64 2.6.18-164.9.1.el5 (on ESXi) OS/Logs on local storage, /home all on NFS server for datastore (NFS Store Centos 5.5 x86_64 2.6.18-194.11.1.el5) Thunderbird 3.1.10 on XP/W7 Desktops We are seeing a werid issue where there is a delay of up to a few mins in seeing label updates on messages. I have confirmed that Thunderbird is sending the update to the server with WireShark, its just additional users connected to the same mailbox do not see them. Marking a message as Seen/Un-Seen happens faster just not labels. If you have a label set when you mark a message as Seen/Un-Seen the other clients then see the update straight away. -- The information contained in or attached to this email is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain any message or any part of it. If you have received an email in error, please contact the sender and delete the material from any computer. The contents of this email are not for publication unless specifically stated. Furthermore, the information contained in this message, and any attachment(s) thereto, is for information purposes only and may contain the personal views and opinions of the author, which are not necessarily the views and opinions of WENN or its subsidiaries and associated companies. We make every effort to keep our network free from viruses. However, you do need to check this e-mail and any attachments to it for viruses as we can take no responsibility for any computer virus which may be transferred by way! of this e-mail. WENN Ltd: Registered Office: 35 Tileyard Studios, Tileyard Road, London, N7 9AH, England. Registered No: 4375163. Place of Registration: United Kingdom. USA Entertainment News Inc (d/b/a WENN): Registered Office: 60 Madison Avenue, Suite 1027, New York, NY 10010, USA The WENN name, design and related marks are trademarks of the WENN group of companies. (c) 2011 All Rights Reserved.

6 15

Re: [Dovecot] save failed to INBOX: Not enough disk space
by Osvaldo Alvarez Pozo 08 Jun '11

08 Jun '11

Hi Doing mail debug I found this dovecot: lmtp(12696, user1(a)domain.tld) Error: o_stream_send_istream(/var/vmail/domain.tld/user1/Maildir/tmp/1307537596.M117043P12696.smtp1) failed: No space left on device dovecot: lmtp(12696, user1(a)domain.tld) Error: o_stream_flush(/var/vmail/domain.tld/user1/Maildir/tmp/1307537596.M117043P12696.smtp1) failed: No space left on device So dovecot write in to a tmp folder inside the user Maildir before definitly copying it to new folder. But why it says thereis no space left? 2011/6/8 Johan Hendriks <joh.hendriks(a)gmail.com>: > Osvaldo Alvarez Pozo schreef: >> >> Hi >> this is the output of df -h >> >> Filesystem Size Used Avail Use% Mounted on >> /dev/sda2 5.5G 1.8G 3.6G 33% / >> tmpfs 502M 0 502M 0% /lib/init/rw >> udev 10M 680K 9.4M 7% /dev >> tmpfs 502M 0 502M 0% /dev/shm >> /dev/sda1 122M 41M 76M 35% /boot >> /dev/sda3 942M 18M 877M 2% /tmp >> /dev/sda6 7.4G 812M 6.3G 12% /var/log >> /dev/mapper/vmail >> 120G 84G 37G 70% /var/vmail >> >> So /var/spool depends on "/" wich has 3.6G available. >> >> Thanks >> >> >> 2011/6/8 Johan Hendriks<joh.hendriks(a)gmail.com>: >>> >>> Osvaldo Alvarez Pozo schreef: >>>> >>>> Hi Tom, >>>> >>>> it is dovecot 2.0.12 this is the doveconf -n output. >>>> >>>> >>>> There is not file system quota. >>>> >>>> This is the output of doveconf -n >>>> >>>> # 2.0.12: /usr/local/dovecot/etc/dovecot/dovecot.conf >>>> # OS: Linux 2.6.32-bpo.5-amd64 x86_64 Debian 5.0.5 ocfs2 >>>> auth_cache_size = 1 M >>>> auth_mechanisms = plain login >>>> base_dir = /usr/local/dovecot >>>> disable_plaintext_auth = no >>>> first_valid_uid = 5000 >>>> last_valid_uid = 5000 >>>> mail_access_groups = mail >>>> mail_gid = 8 >>>> mail_location = maildir:/var/vmail/%d/%u/Maildir >>>> mail_max_userip_connections = 100 >>>> mail_uid = 5000 >>>> maildir_very_dirty_syncs = yes >>>> managesieve_notify_capability = mailto >>>> managesieve_sieve_capability = fileinto reject envelope >>>> encoded-character vacation subaddress comparator-i;ascii-numeric >>>> relational regex imap4flags copy include variables body enotify >>>> environment mailbox date >>>> mmap_disable = yes >>>> passdb { >>>> args = /usr/local/dovecot/etc/dovecot/sql.conf >>>> driver = sql >>>> } >>>> plugin { >>>> quota = maildir:User quota >>>> sieve = ~/.dovecot.sieve >>>> sieve_dir = ~/sieve >>>> } >>>> protocols = imap pop3 lmtp sieve >>>> service auth { >>>> client_limit = 10500 >>>> unix_listener /var/spool/postfix/private/auth { >>>> group = mail >>>> mode = 0660 >>>> user = postfix >>>> } >>>> unix_listener auth-userdb { >>>> group = mail >>>> mode = 0660 >>>> user = postfix >>>> } >>>> } >>>> service imap-login { >>>> process_min_avail = 2 >>>> service_count = 0 >>>> vsz_limit = 128 M >>>> } >>>> service imap { >>>> process_limit = 5000 >>>> } >>>> service lmtp { >>>> inet_listener lmtp { >>>> address = 127.0.0.1 ::1 >>>> port = 24 >>>> } >>>> unix_listener /var/spool/postfix/private/dovecot-lmtp { >>>> group = postfix >>>> mode = 0660 >>>> user = postfix >>>> } >>>> } >>>> service managesieve-login { >>>> inet_listener sieve { >>>> port = 4190 >>>> } >>>> } >>>> service pop3-login { >>>> process_min_avail = 2 >>>> service_count = 0 >>>> } >>>> service pop3 { >>>> process_limit = 5000 >>>> } >>>> >>>> userdb { >>>> driver = prefetch >>>> } >>>> >>>> userdb { >>>> args = /usr/local/dovecot/etc/dovecot/sql.conf >>>> driver = sql >>>> } >>>> >>>> protocol imap { >>>> imap_client_workarounds = delay-newmail >>>> } >>>> protocol pop3 { >>>> pop3_client_workarounds = outlook-no-nuls oe-ns-eoh >>>> pop3_uidl_format = %08Xu%08Xv >>>> } >>>> >>>> protocol lmtp { >>>> mail_plugins = sieve >>>> postmaster_address = admin(a)domain.tld >>>> } >>>> protocol sieve { >>>> managesieve_implementation_string = Dovecot Pigeonhole >>>> managesieve_logout_format = bytes=%i/%o >>>> managesieve_max_compile_errors = 5 >>>> managesieve_max_line_length = 65536 >>>> } >>>> >>>> >>>> Thanks >>>> >>>> 2011/6/8 Tom Hendrikx<tom(a)whyscream.net>: >>>>> >>>>> On 08/06/11 13:47, Timo Sirainen wrote: >>>>>> >>>>>> On Wed, 2011-06-08 at 11:16 +0200, Osvaldo Alvarez Pozo wrote: >>>>>> >>>>>>> But I have found this on my logs "save failed to INBOX: Not enough >>>>>>> disk >>>>>>> space" . >>>>>> >>>>>> This means that a write() (or some other syscall) returned either >>>>>> ENOSPC >>>>>> or EDQUOT error message, or that quota plugin decided user is out of >>>>>> quota. >>>>>> >>>>>>> There is enougth space on disk. and I am not using quota plugin on >>>>>>> lmtp >>>>>> >>>>>> What about filesystem quota? >>>>>> >>>>> I remember there were similar issues in the past, due to the fact that >>>>> messages larger than 128kb were temporarily stored on disk in the users >>>>> homedir. Maybe this is related? >>>>> >>>>>>> my lmtp conf is as follow: >>>>>> >>>>>> A full doveconf -n output would be better. >>>>>> >>>>> OP has not posted complete doveconf -n output, nor a specific version >>>>> (other than 'dovecot 2'). Please do so. >>>>> >>>>> >>>>> -- >>>>> Reagrds, >>>>> Tom >>>>> >>> Wild guess, >>> What is the disk space of your /var dir or /var/spool for that matter >>> Or df -h for all mounted filesystems. >>> >>> regards, >>> Johan Hendriks >>> >>> > Could it be a permission problem? > > mail_gid = 8 > On my system this is the same as mail_uid in your case 5000 > > regards, > Johan > > >

2 2

[Dovecot] save failed to INBOX: Not enough disk space
by Osvaldo Alvarez Pozo 08 Jun '11

08 Jun '11

Hi I migrated to dovecot 2 and I started using lmtp for mail delivery. But I have found this on my logs "save failed to INBOX: Not enough disk space" . There is enougth space on disk. and I am not using quota plugin on lmtp my lmtp conf is as follow: # ## LMTP specific settings ## # Support proxying to other LMTP/SMTP servers by performing passdb lookups. #lmtp_proxy = no # When recipient address includes the detail (e.g. user+detail), try to save # the mail to the detail mailbox. See also recipient_delimiter and # lda_mailbox_autocreate settings. #lmtp_save_to_detail_mailbox = no protocol lmtp { # Space separated list of plugins to load (default is global mail_plugins). #mail_plugins = $mail_plugins mail_plugins = sieve postmaster_address = admin(a)domain.tld } Any idea please? Thanks

6 13