- dovecot - dovecot.org

[Dovecot] Kerem Erciyes wants to stay in touch on LinkedIn
by Kerem Erciyes 17 Feb '11

17 Feb '11

I'd like to add you to my professional network on LinkedIn. - Kerem Erciyes Kerem Erciyes Founder at Kerem Erciyes - Systems Consultant Confirm that you know Kerem Erciyes https://www.linkedin.com/e/458g9e-gk9r6mx4-1u/isd/2349073602/c9W4Eipx/EML-i… ------------------------------------------------------------------------------- After connecting with Kerem, check out: - Michael Neil at Merrill Lynch - John McBride, SPHR, VBS at Consentium Search - Troy Henikoff at Excelerate (c) LinkedIn 2011

1 1

Re: [Dovecot] dovecot Digest, Vol 94, Issue 44
by Alan Brown 17 Feb '11

17 Feb '11

> Date: Wed, 16 Feb 2011 07:04:55 +0000 (GMT) > From: Spyros Tsiolis <stsiol(a)yahoo.co.uk> > Subject: [Dovecot] [Off Topic] - Any backup solutions ? > To: Dovecot <dovecot(a)dovecot.org> > Message-ID: <627531.34045.qm(a)web27203.mail.ukl.yahoo.com> > Content-Type: text/plain; charset=utf-8 > > OK, I know this is not for this list; However, reading all these > mails on the topic of filesystems, I thought that it's a good > place to ask about backup software on linux. Bacula works very well and scales to both small and large setups extremely easily. www.bacula.org

2 1

[Dovecot] Problem with messages with long lines
by ZMA - Emiliano Mariño 17 Feb '11

17 Feb '11

Hello dear mailing list readers, Recently I am experimenting a problem trying to retrieve messages over a POP3 protocol. Everything goes right until the POP3 client tries to retrieve a message that contains one or more long lines lines as long as 3000 characters or even more. The client (Outlook 2003 and 2007) stops on that message until timeout. I have opened a connection manually to see what happens, and when I issue the RETR command on one of these messages, dovecot informs the message size and then nothing else. No message sending. Any other message works fine; I get the message size and next the message itself. I have upgraded to version 2.0.1 but I still get the same behavior. No error is reported on the server side. Logs indicate that everything is just fine. Any advice on how to solve this would be very appreciated. Here is the dovecot 2.0.1 configuration: ############################################################################ ####### # 2.0.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.23.1-42.fc8 i686 Fedora release 8 (Werewolf) auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@& auth_verbose = yes disable_plaintext_auth = no listen = * login_greeting = Dovecot DA ready. mail_access_groups = mail mail_location = maildir:~/Maildir passdb { args = username_format=%n /etc/virtual/%d/passwd driver = passwd-file } passdb { driver = shadow } service auth { user = root } ssl_cert = </etc/httpd/conf/ssl.crt/server.crt ssl_cipher_list = ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP ssl_key = </etc/httpd/conf/ssl.key/server.key userdb { args = username_format=%n /etc/virtual/%d/passwd driver = passwd-file } userdb { driver = passwd } verbose_proctitle = yes protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } ############################################################################ ####### Thanks a lot for your time Kind regards, cid:image001.png@01CB7784.62522490 Emiliano Mariño Technical Analyst Senior <mailto:%20mkt4@zma.com.ar> tech7(a)zma.com.ar Larrea 1011 piso 8º | C1117ABE | Ciudad A. de Buenos Aires - ARGENTINA Tel: (5411) 4825-1602 | Fax: (5411) 4825-7692 <http://www.zma.com.ar/> www.zma.com.ar

4 3

[Dovecot] Logout fails after copy to non existing folder (mutt)
by Micha Krause 17 Feb '11

17 Feb '11

Hi, I have a Problem with mutt, and copying mails to a new folder. If I copy to a non existing folder, and try to logout, dovecot doesnt accept the logout. I was able to reproduce the problem with the following imap session: C: 1 login user pass S: 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk] Logged in C: 2 select INBOX S: 2 OK [READ-WRITE] Select completed. C: 3 UID COPY 82806 "INBOX.test" S: 3 NO [TRYCREATE] Mailbox doesn't exist: INBOX.test C: 4 LOGOUT S: <nothing> Micha Krause

2 1

[Dovecot] Dovecot + Exim + Maildir quota problem
by Matteo Tinazzi 17 Feb '11

17 Feb '11

Hi all i'm a new user of this list, i got a server with DirectAdmin which has exim as MUA, dovecot as POP/IMAP server, recently i added the quota to exim and pointed the maildirsize file in the same location if the dovecot's one so both services can interact with it. This has been done to let exim update the quotas while doing localdelivery while dovecot can show quotas through roundcube and update them when users delete mails. The issue that i noticed is that some users get wrong quota informations... after a little investigation i think it could be a concurrent access to this file so dovecot tries to remove the deleted mails fomr maildirsize and exim tries to put new ones inside. In a specific case i got a user with a quota of 50M seeing that 75% of his quota filled while the real weight of the mail files is about 4% ... any help would be very appreciated

1 1

[Dovecot] Evolution IMAP with Dovecot as proxy
by Antonio Perez-Aranda 17 Feb '11

17 Feb '11

We have some users who use Evolution as mail client. During migration process we are run Dovecot as proxy of Courier-imap until any user get migrated depend of ldap attribute. At present, the problem is that with Thunderbird and other clients, The client run as normal. But Evolution can't get new messages or Suscription list. Capabilities on Courier and Dovecot are differents, but when a connection is proxied to Courier, Courier print the Capabilitites. Any body has any idea of this? -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

3 11

[Dovecot] Dovecot 2.0.9/1.2.11: crash in driver-pgsql.c
by dovecot＠excellency.fr 17 Feb '11

17 Feb '11

Hello, I finally took time to isolate and reproduce a long time Dovecot crash that is bugging me since at least Dovecot 1.0.x. It's still there in Dovecot 2.0.9, which I just tested. Here is the backtrace from my logs: Feb 16 16:56:57 dovecot: auth: Error: pgsql: Query timed out, aborting Feb 16 17:25:16 dovecot: auth: Panic: file driver-pgsql.c: line 349 (result_finish): assertion failed: (db->io == NULL) Feb 16 17:25:16 dovecot: auth: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0 [0x7fdbfe6d4272] -> /usr/lib/dovecot/libdovecot.so.0 [0x7fdbfe6d42d6] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x7fdbfe6d46c8] -> dovecot/auth [0x42f555] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handle_timeouts+0xdd) [0x7fdbfe6df9bd] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x5e) [0x7fdbfe6e05be] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7fdbfe6df618] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7fdbfe6cd883] -> dovecot/auth(main+0x2d4) [0x419474] -> /lib/libc.so.6(__libc_start_main+0xe6) [0x7fdbfc4f91a6] -> dovecot/auth [0x40da09] Feb 16 17:26:35 dovecot: master: Error: service(auth): child 140263 killed with signal 6 (core not dumped) Both my userdb and passdb use a PostgreSQL database. The bug happens when the PostgreSQL host suddenly becomes unavailable. I can easily reproduce it by launching Dovecot with my host being up, and then null routing its IP address (to simulate an outage): route add -host 10.0.0.2 reject (10.0.0.2 being the IP address of the PostgreSQL host.) >From that point, if I try to authenticate (using a POP3 connection, for instance), dovecot-auth will crash one or two minutes later. In Dovecot 2.0.9, despite the crash, authentication will resume once the PostgreSQL is back up (which can be simulated with: route delete -host 10.0.0.2 reject). In Dovecot 1.x however (latest version I tested is 1.2.11), it will stay in this state forever (logs are flooded with Password query failed: Not connected to database.) Core dump is available on http://paste.excellency.fr/dovecot.core # dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.37 x86_64 Debian 5.0.6 auth_mechanisms = plain login auth_username_chars = disable_plaintext_auth = no first_valid_gid = 2000 first_valid_uid = 2000 listen = *, [::] log_timestamp = "%Y-%m-%d %H:%M:%S " mail_fsync = always mail_location = maildir:~/ mail_max_userip_connections = 100 mail_nfs_index = yes mail_nfs_storage = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mmap_disable = yes passdb { args = /etc/dovecot/dovecot-pgsql.conf driver = sql } plugin { quota = maildir sieve = filter.sieve sieve_max_actions = 64 sieve_max_redirects = 100 } protocols = imap pop3 service auth { unix_listener auth-client { mode = 0666 } } service imap-login { service_count = 0 } service imap { process_limit = 1024 } service managesieve-login { service_count = 0 } service pop3-login { service_count = 0 } service pop3 { process_limit = 1024 } ssl_cert = </etc/ssl/certs/my.pem ssl_key = </etc/ssl/private/my.key userdb { args = /etc/dovecot/dovecot-pgsql.conf driver = sql } protocol imap { imap_client_workarounds = delay-newmail mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } # cat /etc/dovecot/dovecot-pgsql.conf driver = pgsql connect = host=10.0.0.2 dbname=foobar user=dovecot password=foobar default_pass_scheme = CRYPT password_query = SELECT password FROM mailbox WHERE domain = '%d' AND local_part = '%n' user_query = SELECT home, uid, gid, system_user, quota_rule FROM mailbox WHERE domain = '%d' AND local_part = '%n' -- Cyril

3 2

[Dovecot] Cannot subscribe to shared folders
by Lukas Haase 17 Feb '11

17 Feb '11

Hi, I am unable to subscribe to shared folders with Thunderbird although everything seems to be correct (dovecot 1.2). What does not work? I click "Subscribe..." in Thunderbird. The shared mailboxes are listed, all with [ ] (no checkbox). Therefore I mark them [x], click "subscribe" and "OK". However, the folders do not appear in the folder tree. Furthermore, when I again click "Subscribe..." the folders do NOT have the mark [x] any more. This happens on different computers with *new* profiles. My configuration is the following (maybe that is the problem?!): namespace private { separator = . prefix =. inbox = no list = no hidden = yes location = maildir:~/Maildir-root subscriptions = yes } namespace private { separator = . prefix = INBOX. inbox = yes subscriptions = yes } namespace public { separator = . prefix = Shared. location = maildir:/var/mail/shared:INDEX=~/Maildir/shared:LAYOUT=fs subscriptions = no } The folder /var/mail/shared has appropriate permissions/form: * Owner: $user:mailuser (all users are member of "mailuser") * All files 0660, all folders 0770 * There exists a dovecot-shared in every folder * There exists a dovecot-acl in each folder where each user has the permissions "lrwstie" I switched on "mail_debug = yes" but no messages. However, the file ~/Maildir-root/subscriptions contains the subscribed folders: Shared.Group1 Shared.Group2 Shared.Group1/Test Furthermore, I switched on rawlog. Everything seems to be OK as well: .in-file: 2 subscribe "Shared.Group1" 3 lsub "" "INBOX.*" 5 lsub "" "Shared.*" 6 list "" "INBOX" .out-file: 2 OK Subscribe completed. [...] I am pretty sure it already worked. But it stopped working. Does anybody have a hint what could be the problem? Regards, Luke

2 4

[Dovecot] dsync conversion error
by Frank Bonnet 17 Feb '11

17 Feb '11

Hello When converting mailboxes I get that kind of error messages : dsync(xxx): Error: Next message unexpectedly lost from mbox file /user/xxx/mail/Sent at 9580036 (cached) the dsync command I run is dsync -u xxx mirror mbox:/user/xxx/mail:INBOX=/var/mail/xxx Dovecot mail_location configuration is : mail_location = mbox:~/MailSpace/Mailboxes:DIRNAME=Mbox-Messages:INDEX=~/Index:CONTROL=~/Kontroll Note that ONLY happen on users's "Sent" folder, never on any other folder Thanks for any advices.

2 2

[Dovecot] Some questions about mdbox
by Maria Arrea 16 Feb '11

16 Feb '11

Hello I am starting testing with dovecot 2.0.9. In my //etc/dovecot/dovecot.conf/ I have the following line: /mail_location = mdbox:/mydomain.org/%2.26Hn/%2.200Hn/%n:INDEX=/mydomain.org/indexes/%2.26Hn… These are my questions (a long mail): *1º How should I restore from backup with mdbox & separate indexes?* I have read in dovecot list archive about restoring the full user mailbox to a temp location and then run something like: /doveadm import mdbox:/tmp/restored_mailbox/ "" savedsince 2011-01-01 / In my schema indexes and mail stores are in separated paths. What (and where!) should I copy to the temp location and how do I restore it? *2º Disaster recovery: indexes & mail store mismatch* When creating backups, indexes and mail store are in different paths. My backup takes several hours, so indexes are copied BEFORE mail stores. Is the backup consistent? What would happens if I lose indexes? Can I still recover the messages? Reading the doc it seems I would lose all the message flags and all the messages would be in INBOX, is this right? *3º Performance tuning with mdbox* I have read in dovecot archive about using mdbox_rotate_size & mdbox_rotate_interval to balance between a lot of smaill files (like Maildir) or really big files (a "variant" of mbox). I have tested with a big vaule of mdbox_rotate_size (100 MB) and is a complete disaster for backup:if a user delete a message, then a nightly cronjob purges the mailbox (refcount=0) a new mdbox .m file is created!. So deleting a 1 k message from the mailbox of an user is a new 99 MB file to backup. Any hint about this? I am also using ext4 (rw,noatime,nodiratime,commit=15,data=writeback) and I have read about mdbox_preallocate_space. I will try it, any hint about this setup? This is not still in production, so I have no idea about IOPs and user concurrency, but I have several thousand users. *4º Compression with mdbox* I am reading about compression in mdbox (zlib/bzlib). I am starting with zlib, has anyone experience with bzlib? How much load is bzlib against zlib and how much delay adds to user experience (and space savings vs zlib???) ? *5º Recover a message with refcount=0* Is there any way to recover a message with refcount=0 without using a backup? I am thinking about the following plan: /1º a user gets her mail via pop3 (or delete a message via imap and empties trash) 2º the message is still stored in my mail server, but has refcount=0 3º nightly backup is performed 4º nightly cronjob purges the mailbox (deleting messaged with refcount=0)/ Using this schema the backup is bigger, but If I can recover files with refcount=0 from backup we can give our users a safeguard against accidentaly deleted pop3 mail. Thank you very much for your responsed and sorry for my (awful) english! Maria

3 2

Re: [Dovecot] Some questions about mdbox
by Maria Arrea 16 Feb '11

16 Feb '11

Hello everybody I have found that with bzip compression level 6 I have a better balance between compression and decompression speed with dovecot+mdbox, but still too slow compared with zlib. Does anybody have any other hint about my original questions (see below) Regards Maria Arrea ----- Original Message ----- From: Maria Arrea Sent: 02/15/11 09:16 PM To: dovecot(a)dovecot.org Subject: [Dovecot] Some questions about mdbox Hello I am starting testing with dovecot 2.0.9. In my //etc/dovecot/dovecot.conf/ I have the following line: /mail_location = mdbox:/mydomain.org/%2.26Hn/%2.200Hn/%n:INDEX=/mydomain.org/indexes/%2.26Hn… These are my questions (a long mail): *1º How should I restore from backup with mdbox & separate indexes?* I have read in dovecot list archive about restoring the full user mailbox to a temp location and then run something like: /doveadm import mdbox:/tmp/restored_mailbox/ "" savedsince 2011-01-01 / In my schema indexes and mail stores are in separated paths. What (and where!) should I copy to the temp location and how do I restore it? *2º Disaster recovery: indexes & mail store mismatch* When creating backups, indexes and mail store are in different paths. My backup takes several hours, so indexes are copied BEFORE mail stores. Is the backup consistent? What would happens if I lose indexes? Can I still recover the messages? Reading the doc it seems I would lose all the message flags and all the messages would be in INBOX, is this right? *3º Performance tuning with mdbox* I have read in dovecot archive about using mdbox_rotate_size & mdbox_rotate_interval to balance between a lot of smaill files (like Maildir) or really big files (a "variant" of mbox). I have tested with a big vaule of mdbox_rotate_size (100 MB) and is a complete disaster for backup:if a user delete a message, then a nightly cronjob purges the mailbox (refcount=0) a new mdbox .m file is created!. So deleting a 1 k message from the mailbox of an user is a new 99 MB file to backup. Any hint about this? I am also using ext4 (rw,noatime,nodiratime,commit=15,data=writeback) and I have read about mdbox_preallocate_space. I will try it, any hint about this setup? This is not still in production, so I have no idea about IOPs and user concurrency, but I have several thousand users. *4º Compression with mdbox* I am reading about compression in mdbox (zlib/bzlib). I am starting with zlib, has anyone experience with bzlib? How much load is bzlib against zlib and how much delay adds to user experience (and space savings vs zlib???) ? *5º Recover a message with refcount=0* Is there any way to recover a message with refcount=0 without using a backup? I am thinking about the following plan: /1º a user gets her mail via pop3 (or delete a message via imap and empties trash) 2º the message is still stored in my mail server, but has refcount=0 3º nightly backup is performed 4º nightly cronjob purges the mailbox (deleting messaged with refcount=0)/ Using this schema the backup is bigger, but If I can recover files with refcount=0 from backup we can give our users a safeguard against accidentaly deleted pop3 mail. Thank you very much for your responsed and sorry for my (awful) english! Maria

1 0

[Dovecot] Auth processes/login processes count
by Thomas Hummel 16 Feb '11

16 Feb '11

Hello Timo, I'm running dovecot-1.2.12/Maildir/LDAP-passdb/LDAP-prefetched-userdb and I'm experiencing "random" latency (which even seem to make squirrelmail timeout sometimes) at login without noticing particular load on the server. LDAP backends are running fine as far as I know so I was investigating maybe mistuned limits : Dovecot is configured (for ~3000 users) with . each login processed in its own process : #login_process_per_connection = yes #login_max_connections = 256 . counts as : #login_processes_count = 3 login_max_processes_count = 1024 auth default { [...] count = 5 } I've got several questions : 1) how can I count more than login_max_processes_count processes ? # ps aux | egrep -i '(pop3|imap)-login' | wc -l # 1031 2) could be my auth process count the bottleneck ? is there a rule of thumb to deduce it from the login process count ? 3) on dovecot login/master/auth design, is my understanding correct ? - dovecot-1.2.x : . passdb and userdb lookup are done by the auth process, on behalf of either the login process which wants to know if the client's password is correct or of the master process which wants to check if it was actually correct and which wants to have the userdb info. . client connection fd is sent to the master which creates the mail process and transfers the fd to it. - dovecot-2.x : . client connection fd does not go through the master anymore but through a socket in the login/ directory . it's the mail process which ask the auth process for the userdb lookup 4) with LDAP backend using {CRYPT} passwords dans with plaintext auth enabled in dovecot, is the clear password crypted before comparing it to the LDAP crypted password or does dovecot try to simply bind to LDAP with the clear password ? Thanks -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Groupe Exploitation et Infrastructure

2 1

[Dovecot] TLS with autosigned certs
by Antonio Perez-Aranda 16 Feb '11

16 Feb '11

Is normal this info/error with autosigned certs? Feb 14 20:25:47 pop3-login: Info: Disconnected (no auth attempts):ip=[127.0.0.1], port=[51243], protocol=pop3, TLS handshaking: SSL_accept() failed: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca: SSL alert number 48 I set on config a specific certs for pop3 protocol including key, cert and ca, protocol pop3 { ssl_cert = </etc/ssl/pop3d.cert ssl_key = </etc/ssl/pop3d.key ssl_ca = </etc/ssl/ca.pem } If I check as true confirmed on Thunderbird client, then, the error is no reported any more. -- Antonio Pérez-Aranda Alcaide aperezaranda(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

3 3

[Dovecot] test emails did not arrive at SMTP server : after dovecot installation
by sunhux G 16 Feb '11

16 Feb '11

Just set up postfix & it's running on my RHES 4.2 box. Immediately after postfix is up, I test sending emails from a permitted domain (ahhh, on this postfix server's domain firewall, we even have a firewall rule which permits Tcp25 from those few sending domains' SMTP servers) using an email client to sender_id@[IP_address_of_the_postfix_server] & the /var/log/maillog on the postfix server indicated the email arrives at the postfix server (with some errors though) : # grep recipient_id /var/log/maillog* maillog:Feb 15 11:41:52 hostname postfix/smtpd[6891]: NOQUEUE: reject: RCPT from gate1.mds.com.sg[203.126.130.157]: 554 5.7.1 <recipient_id(a)[202.6.163.31]>: Relay access denied; from=<prvs=020cae8c4=recipient_id(a)mds.com.sg> to=<recipient_id(a)[202.6.163.31]> proto=ESMTP helo=<gate1.mds.com.sg> maillog:Feb 15 13:43:20 hostname sendmail[7688]: NOQUEUE: SYSERR(recipient_id): can not chdir(/var/spool/mqueue/): Permission denied Then I installed dovecot rpm on my RHES box : uninstall it as it's an old version & reinstall with a newer version & start up dovecot as well. I did not test sending to sender_id@domain_name at that time because the domain I purchased from a domain provider/registrar has yet to be registered in our ISP's DNS. Subsequently I registered the following A, MX & NS records with our ISP : A: myportaltech.com. IN A 202.6.163.31 A: smtp.myportaltech.com. IN A 202.6.163.31 PTR: 31.163.6.202.in-addr.arpa. IN PTR smtp.myportaltech.com. MX: myportaltech.com. IN MX 10 smtp.myportaltech.com. NS: myportaltech.com. IN NS ns1.businessexprezz.com. NS: myportaltech.com. IN NS ns2.businessexprezz.com. The above myportaltech is just a fictitious name of my domain but I can provide the actual domain name if needed. After the above records have been propagated to all other DNSes, I test sending email from the same permitted domain, this time using domain name & the email never arrives & I did not receive a 'bounced mail' notification too. Then I test sending from the same domain to recipient_id(a)[202.6.163.31] & this time round, the test email never show up in /var/log/maillog* anymore. The network/security guys confirmed that the firewall logs did not show any denied SMTP records. So how do I go about troubleshooting this? Is this a DNS record entries issue, firewall/network issue, related to dovecot or something within my postfix server? Thanks Sun

2 1

[Dovecot] Dovecot can't start with error pop3-login & imap-login not supported protocol family
by sunhux G 16 Feb '11

16 Feb '11

I've done the installation (rpm downloaded from the RHES4 link given by Oli below) but dovecot won't start, it gave the error pop3-login & imap-login not supported by protocol. I'm sure with a much older version (in my previous post) of dovecot, I'm able to start up dovecot & it did not give this error. Thought dovecot is suppose to come with pop3 & imap? # rpm -Uvh --force mysqlclient14-4.1.22-1.el4s1.1.i386.rpm warning: mysqlclient14-4.1.22-1.el4s1.1.i386.rpm: V3 DSA signature: NOKEY, key ID 443e1821 Preparing... ########################################### [100%] 1:mysqlclient14 ########################################### [100%] /sbin/ldconfig: /usr/lib/libcpqlsptransport.so.0 is not a symbolic link [root@tmp]# rpm -qa | grep -i mysql mysql-4.1.12-3.RHEL4.1 perl-DBD-MySQL-2.9004-3.1 php-mysql-4.3.9-3.8 mysql-server-4.1.12-3.RHEL4.1 mysqlclient14-4.1.22-1.el4s1.1 <== it's there now [root@tmp]# rpm -i ./dovecot-2.0.9-1_125.el4.i386.rpm warning: only V3 signatures can be verified, skipping V4 signature warning: only V3 signatures can be verified, skipping V4 signature [root@tmp]# cd /etc [root@etc]# ls -ld rc*/*dove* lrwxrwxrwx 1 root root 17 Feb 16 11:37 rc0.d/K01dovecot -> ../init.d/dovecot lrwxrwxrwx 1 root root 17 Feb 16 11:37 rc1.d/K01dovecot -> ../init.d/dovecot lrwxrwxrwx 1 root root 17 Feb 16 11:37 rc2.d/K01dovecot -> ../init.d/dovecot lrwxrwxrwx 1 root root 17 Feb 16 11:37 rc3.d/K01dovecot -> ../init.d/dovecot lrwxrwxrwx 1 root root 17 Feb 16 11:37 rc4.d/K01dovecot -> ../init.d/dovecot lrwxrwxrwx 1 root root 17 Feb 16 11:37 rc5.d/K01dovecot -> ../init.d/dovecot lrwxrwxrwx 1 root root 17 Feb 16 11:37 rc6.d/K01dovecot -> ../init.d/dovecot [root@nspplss2 etc]# ls -ld rc*/S*dove* ls: rc*/S*dove*: No such file or directory [root@nspplss2 etc]# pwd /etc [root@etc]# ls rc*/*postf* rc0.d/K30postfix rc2.d/S80postfix rc4.d/S80postfix rc6.d/K30postfix rc1.d/K30postfix rc3.d/S99postfixstart rc5.d/S80postfix [root@etc]# ln -s /etc/init.d/dovecot /etc/rc3.d/S70dovecot [root@etc]# ln -s /etc/init.d/dovecot /etc/rc5.d/S70dovecot [root@]# init.d/dovecot start Starting Dovecot Imap: Error: socket() failed: Address family not supported by protocol Error: service(pop3-login): listen(::, 110) failed: Address family not supported by protocol Error: socket() failed: Address family not supported by protocol Error: service(pop3-login): listen(::, 995) failed: Address family not supported by protocol Error: socket() failed: Address family not supported by protocol Error: service(imap-login): listen(::, 143) failed: Address family not supported by protocol Error: socket() failed: Address family not supported by protocol Error: service(imap-login): listen(::, 993) failed: Address family not supported by protocol Fatal: Failed to start listeners [FAILED] [root@etc]# telnet localhost 110 Trying 127.0.0.1... telnet: connect to address 127.0.0.1: Connection refused telnet: Unable to connect to remote host: Connection refused [root@etc]# rpm -qa | grep dove dovecot-2.0.9-1_125.el4 [root@etc]# chkconfig --list | grep pop3 [root@etc]# chkconfig --list | grep imap On Tue, Feb 15, 2011 at 8:39 PM, Oli Schacher <dovecot(a)lists.wgwh.ch> wrote: > On Tue, 15 Feb 2011 18:00:53 +0800 > sunhux G <sunhux(a)gmail.com> wrote: > > > I'm on RHES 4.x > > > > I downloaded 2 dovecot RPM packages from > > http://packages.sw.be/dovecot/ > > > > dovecot-1.0.13-1.el4.rfx.i386.rpm 13-Nov-2010 22:15 1.8M > > RHEL4 and CentOS-4 x86 32bit > > and > > dovecot-0.99.13-1.2.el4.test.i386.rpm 21-Feb-2005 16:57 693K > > RHEL4 and CentOS-4 x86 32bit > > > > [...] > >Q1: > >Is the test version rpm of dovecot reliable? It's only half the size > >of the other rpm (that I was not able to install) > > 0.9 / 1.0 : These versions are way out of date and you will probably > have a hard time getting support. I suggest you try the current > versions from atrpms.net We have been using the 2.0 RHEL5 packages by > Axel Thimm for quite some time now and they work flawlessly. > > Link for RHEL4 packages: http://packages.atrpms.net/dist/el4/dovecot/ > > Maybe this fixes Q2 as well ;-) > > Q3: You'll find lots of examples / tutorials in the dovecot wiki : > http://wiki2.dovecot.org/#HOWTOs.2C_examples_and_tutorials > > HTH > > Oli >

2 2

[Dovecot] [Off Topic] - Any backup solutions ?
by Spyros Tsiolis 16 Feb '11

16 Feb '11

Hello kind people, OK, I know this is not for this list; However, reading all these mails on the topic of filesystems, I thought that it's a good place to ask about backup software on linux. Here's what I have. It's an HP 230 Ultrium LTO 1 SCSI backup mechanism (tape streamer to be exact). I'm supposed to hook it up today with an adaptec AHA-2940 controller to a gigabyte mainboard running Ubuntu Server 10.04. Does anyone have a config close to this one ? What kind of software would you chaps recommend ? dd ? Bacula ?? Other ?? This mechanism is supposed to grab backups from the same machine running it (the tape streamer), which is an ubuntu server version 10.04 with three SATA disks and maybe some stuff remotely (through the local network that is), from a couple of windows 7 / windows xp machines. Also 100Gb on every tape is not going to be enough and it looks like I will have to swap tapes during the process. Thank you all for your time and patience, Best Regards, spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

1 0

[Dovecot] help with dovecot installation dependencies
by sunhux G 15 Feb '11

15 Feb '11

I'm on RHES 4.x I downloaded 2 dovecot RPM packages from http://packages.sw.be/dovecot/ dovecot-1.0.13-1.el4.rfx.i386.rpm 13-Nov-2010 22:15 1.8M RHEL4 and CentOS-4 x86 32bit and dovecot-0.99.13-1.2.el4.test.i386.rpm 21-Feb-2005 16:57 693K RHEL4 and CentOS-4 x86 32bit The first rpm fails with error below : # rpm -i ./dovecot-1.0.13-1.el4.rfx.i386.rpm warning: ./dovecot-1.0.13-1.el4.rfx.i386.rpm: V3 DSA signature: NOKEY, key ID 6b8d79e6 error: Failed dependencies: libmysqlclient.so.14(libmysqlclient_14) is needed by dovecot-1.0.13-1.el4.rfx.i386 I have a hard time trying to locate an rpm that contains libmysqlclient.so.14 & have no luck : # rpm -i ./mysql-libs-5.1.42-4.el6.i686.rpm warning: ./mysql-libs-5.1.42-4.el6.i686.rpm: V3 RSA/MD5 signature: NOKEY, key ID f21541eb error: Failed dependencies: libcrypto.so.10 is needed by mysql-libs-5.1.42-4.el6.i686 libssl.so.10 is needed by mysql-libs-5.1.42-4.el6.i686 rpmlib(FileDigests) <= 4.6.0-1 is needed by mysql-libs-5.1.42-4.el6.i686 rtld(GNU_HASH) is needed by mysql-libs-5.1.42-4.el6.i686 rpmlib(PayloadIsXz) <= 5.2-1 is needed by mysql-libs-5.1.42-4.el6.i686 Then I installed the 2nd dovecot rpm successfully but its filename indicated it's a "test" version : # rpm -i ./dovecot-0.99.13-1.2.el4.test.i386.rpm warning: ./dovecot-0.99.13-1.2.el4.test.i386.rpm: V3 DSA signature: NOKEY, key ID 6b8d79e6 # /etc/init.d/dovecot start Starting IMAP daemon (dovecot): [ OK ] Q1: Is the test version rpm of dovecot reliable? It's only half the size of the other rpm (that I was not able to install) Q2: Kindly assist me to resolve the 1st rpm issue : let me know where I can download the dependencies etc Q3: Lastly, kindly point me to a simple doc that tells me how to do basic setup of dovecot & create simple mailbox accounts. I'm a complete newbie to dovecot & postfix. Have some Linux know-how

2 3

[Dovecot] Recover a deleted message in MDBOX format ?
by Frank Bonnet 15 Feb '11

15 Feb '11

Hello Every night a backup of all mailboxes is performed to a NFS mounted partition All our mailboxes are now in MDBOX format. I wonder how it would be possible to recover one email accidentally deleted by a user ? It was easy in MBOX format to extract and save it using mutt ( as root ) from the backuped mbox then re-copy it to the user's mbox. Of course I should access to the backup mailboxes space using thunderbird but doing this I need to know every users's passwords, that is unacceptable. for security and privacy reasons. Let users access to the backup space is not possible of course. Is there a tool ? Thanks

1 1

[Dovecot] FreeBSD tuning for a dovecot + postfix server ?
by Frank Bonnet 14 Feb '11

14 Feb '11

Hello I've googled around to tune a bit my mailhub ( AMD64 FreeBSD 8.1, 12 Gb RAM, 2 Tb raid5 disks , ~4000 mailboxes unix users ) but I am a bit confused, All my clients use thunderbird as MUA ( IMAP, IMAPS ) to connect to the mailhub no direct access to the machine. Any of you guys has some pointer to give ? thanks a lot

2 1

[Dovecot] NoSQL Storage Backend
by Marten Lehmann 14 Feb '11

14 Feb '11

Hello, I found a posting on the mailing list from 2008 "Adding new storage backend to Dovecot" while searching for POP3 and IMAP servers, that allow to use a NoSQL backend rather than a traditional file system. The problem with traditional filesystems is, that they are very limited. You cannot easily extend it, even with RAID 10 all messages may be lost due to a RAID controller failure and just-in-time backups of a heavy loaded system with consistently changing messages folders are virtually impossible. Modern object stores like Scality, CouchDB or MongoDB can be very handy, as they easily allow to keep an arbitrary amount of copies of each message on different servers, you can simply add a storage node and new storage is immediately available and mailboxes aren't bound to a certain server any longer, but messages are evenly distributed across all storage nodes, thus distributing load as well. Since the original posting was dated 2008 I was in good hope, that someone worked on that already, but at least in dovecot-2.0.9/src/lib-storage I couldn't find anything relating to NoSQL message stores. Isn't this option of big interest for every bigger mailbox provider? How hard would it be to develop? Would it be possible to get this developed on a paid basis by the dovecot core team? Kind regards Marten

10 11

[Dovecot] Dsync parallel conversion warning
by Frank Bonnet 14 Feb '11

14 Feb '11

Hello When I run multiple dsync processes in parallel I sometime get this warning message (xxxxxxxx): Warning: Transaction log file /user/xxxxxxxx/mail/.imap/INBOX/dovecot.index.log was locked for xxx seconds "xxx seconds" is variable Is it a problem or just a real warning ? Thanks

2 4

Re: [Dovecot] critical feature from version 1 not migrated to version 2 = authentication configuration database per IP
by DaLiV＠apollo.lv 14 Feb '11

14 Feb '11

Timo Sirainen wrote: >> - another way (possible that will be more easiest, and good enough for >> advanced configurations) = single variable that may be set in block >> of exact ip listener configuration , as for provided before example >> may set variable "auth_db_suffix" = string("dc=domain1,dc=tld") for >> definition "local mail.domain1.tld" and that variable are inserted in >> auth block via variable inserting mechanism ... >> > Again not possible, because config parsing is done much earlier. > think for realization can take idea from that patch : --------------------------------- --- src/auth/auth-request.c.orig 2010-12-30 11:42:54.000000000 +0200 --- src/auth/auth-request.c.orig 2010-12-30 11:42:54.000000000 +0200 @@ -1547,6 +1547,7 @@ auth_request_get_var_expand_table(const { '\0', NULL, "login_user" }, { '\0', NULL, "login_username" }, { '\0', NULL, "login_domain" }, + { 'x', NULL, NULL }, { '\0', NULL, NULL } }; struct var_expand_table *tab; @@ -1600,6 +1601,15 @@ auth_request_get_var_expand_table(const auth_request); } } + const char *lip2user[][2] = {{"127.0.0.3","dc=domain1,dc=tld1"},{"127.0.0.1","localhost"},{"127.0.0.2","dc=domain2,dc=tld2"}}; + int arrsize=sizeof( lip2user ) / sizeof( lip2user[0]); + tab[18].value = ""; // default expanded to - emty string + int i; + for(i=0;i<arrsize;i++) { + if (strcmp(net_ip2addr(&auth_request->local_ip),(lip2user[i][0]))==0) { + tab[18].value = lip2user[i][1]; + } + } return tab; } --------------------------------- and there need only possibility to define pairs in config file for lip2user array initialization - then macro/variable %x will be available for substitution in all modules - as for ldap , as for filename-based parameters. in exaple patch created static table to match lip to suffix 127.0.0.3 = "dc=domain1,dc=tld1" 127.0.0.1 = "localhost" 127.0.0.2 = "dc=domain2,dc=tld2" how to initialize arrays from config - i'm was not explored for currently used coding structures may create this array more complex = not as simple pair - but as for selective conversion: %x1 lip to text1, %x2 lip to text2, %x3 lip to text3 ... - then diffirent advanced configurations will be possible ...

1 0

[Dovecot] SIS generating 2 different hashes for the same mail and attachment
by Nick Rosier 14 Feb '11

14 Feb '11

Hi, I've been testing SIS over the weekend as it seems to be a nifty feature. I don't have that many users and mailboxes but still... I only added the following line to my configuration: mail_attachment_dir = /var/spool/vmail/attachments As a test I sent a mail from GMail to 2 mailboxes (1 To and 1 CC). The attachment got saved to the attachment directory (on ZFS): # find . ./04 ./04/78 ./04/78/0478b28c2a4c235370bb3cef4bc0482bb6000dae-b8819638a60e574d5b530100bde47b1f-2088e7301f9e3c4dc97e0000bde47b1f-244 ./04/78/0478b28c2a4c235370bb3cef4bc0482bb6000dae-007dcd01a70e574d5c530100bde47b1f-98d08416e4712b4d75310100bde47b1f-192 # ls -l total 519 -rw------- 1 vmail vmail 242866 Feb 12 23:50 0478b28c2a4c235370bb3cef4bc0482bb6000dae-007dcd01a70e574d5c530100bde47b1f-98d08416e4712b4d75310100bde47b1f-192 -rw------- 1 vmail vmail 242866 Feb 12 23:50 0478b28c2a4c235370bb3cef4bc0482bb6000dae-b8819638a60e574d5b530100bde47b1f-2088e7301f9e3c4dc97e0000bde47b1f-244 So these files are not hardlinks, they are 2 seperate files. Checksums are the same: # sum * 58522 238 0478b28c2a4c235370bb3cef4bc0482bb6000dae-007dcd01a70e574d5c530100bde47b1f-98d08416e4712b4d75310100bde47b1f-192 58522 238 0478b28c2a4c235370bb3cef4bc0482bb6000dae-b8819638a60e574d5b530100bde47b1f-2088e7301f9e3c4dc97e0000bde47b1f-244 # md5 * MD5 (0478b28c2a4c235370bb3cef4bc0482bb6000dae-007dcd01a70e574d5c530100bde47b1f-98d08416e4712b4d75310100bde47b1f-192) = 684863b31dad701857642caedcdbf20a MD5 (0478b28c2a4c235370bb3cef4bc0482bb6000dae-b8819638a60e574d5b530100bde47b1f-2088e7301f9e3c4dc97e0000bde47b1f-244) = 684863b31dad701857642caedcdbf20a Did I miss something? I would have expected the file once in the attachment_dir. Rgds, N.

1 0

[Dovecot] Question about mdbox_preallocate_space and ext4
by Javier de Miguel Rodríguez 14 Feb '11

14 Feb '11

Hello Can anyone explain about mdbox_preallocate_space and ext4? Regards Javier

2 1

[Dovecot] Can't connect to auth server
by Phill Edwards 13 Feb '11

13 Feb '11

I'm trying to phase out procmail and move to dovecot-sieve instead. It ain't proving easy. I'll describe my setup: - Centos 5.2 box with dovecot 1.1.4 and dovecot-sieve 1.1.6 from ATrpms. - A single user account is used to store all our email (the account is called maildb). - Getmail is being used to fetch the email from various ISP mailboxes. I want to deliver mail to different folders in maildb's Maildir/ depending on who the email is addressed to (the procmail recipes currently do that). - Getmail destination section looks like this: [destination] type = MDA_external path = /usr/libexec/dovecot/deliver arguments = ("-d", "maildb") allow_root_commands = true - When I run getmail I get this error in dovecot.log: deliver(maildb): May 04 22:15:26 Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory It's true that I don't have a file called auth-master. I guess I should have but until I started this dovecot-sieve work it was never a problem. I have no idea what that file should look like. As I installed from binary RPMs I would have thought one would have come with the install. Can anyone help? Regards, Phill

4 6