- dovecot - dovecot.org

[Dovecot] v2.0 IMAP Capabilities announcement
by Thomas Leuxner 23 Feb '10

23 Feb '10

Hi, I have an Android Mail App which worked fine with IDLE pushes before (K-9 Mail) under 1.2.10. With 2.0 beta 3 it seems to be looking for an IDLE prompt from the server, otherwise it will disable connection idling (whether this is valid or not). Setting 'imap_capability = IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID IDLE ENABLE' does the trick, but is it possible to add additional values to the default reply like this? imap_capability = +IDLE ...or whatever syntax/form one would chose to preserve internal defaults. Thanks Thomas

7 8

[Dovecot] show only subscribed folders
by Frank Cusack 23 Feb '10

23 Feb '10

is there a plugin or some other method by which i could have a user ONLY have access to subscribed folders? having a separate login or a separate instance of dovecot is ok if necessary. the iPhone always shows ALL folders, not just subscribed ones. i'd like to be able to see only the subscribed folders.

2 1

[Dovecot] Dovecot 2.0.beta3 Configuration issue (I think)
by Mark Sapiro 23 Feb '10

23 Feb '10

I have been running dovecot 1.2.10 without problems. I am trying to install 2.0.beta3. I have I think translated all my configuration customizations correctly, but I have problems. I can start dovecot, but I can't login, at least not with SSL. Here's my dovecot -n # 2.0.beta3: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-8.1.14.el5 i686 CentOS release 5 (Final) auth_mechanisms = plain apop login auth_worker_max_count = 5 mail_location = mbox:~/Mail:INBOX=/var/spool/mail/%u mail_privileged_group = mail mbox_write_locks = fcntl dotlock passdb { args = /usr/local/etc/dovecot.passwd deny = no driver = passwd-file master = no pass = no } passdb { deny = no driver = pam master = no pass = no } ssl_cert = /etc/postfix/sbh16-cert.pem ssl_key = /etc/postfix/sbh16-key.pem userdb { driver = passwd } Note the files /etc/postfix/sbh16-cert.pem and /etc/postfix/sbh16-key.pem exist and are the same files I use with dovecot 1.2. Dovecot starts OK, but when I try to connect with a pop3 or imap client, the connection is established, but no response is sent to the client. Here are the dovecot entries from the maillog from startup through the failed pop3 and imap logins. Feb 21 10:50:43 sbh16 dovecot: master: Dovecot v2.0.beta3 starting up (core dumps disabled) Feb 21 10:51:28 sbh16 dovecot: pop3-login: Panic: file login-settings.c: line 216 (login_settings_read): assertion failed: (input.roots[count] == NULL) Feb 21 10:51:28 sbh16 dovecot: pop3-login: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0 [0xc98950] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xc989a5] -> /usr/local/lib/dovecot/libdovecot.so.0 [0xc98008] -> /usr/local/lib/dovecot/libdovecot-login.so.0(login_settings_read+0x336) [0x1959a6] -> /usr/local/lib/dovecot/libdovecot-login.so.0(main+0x107) [0x195b77] -> /lib/libc.so.6(__libc_start_main+0xdc) [0x4614cdec] -> dovecot/pop3-login(main+0x49) [0x80493c1] Feb 21 10:51:28 sbh16 dovecot: master: service(pop3-login): child 3280 killed with signal 6 (core dumps disabled) Feb 21 10:51:28 sbh16 dovecot: master: service(pop3-login): command startup failed, throttling Feb 21 10:51:47 sbh16 dovecot: imap-login: Fatal: Can't load ssl_cert: There is no certificate. Feb 21 10:51:47 sbh16 dovecot: master: service(imap-login): command startup failed, throttling I suspect I've overlooked something in the config or I have something wrong, but I don't know what. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 5

[Dovecot] [AUTH] Extra @ in user and empty passwd with CRAM-MD5
by Toorop 22 Feb '10

22 Feb '10

Hi, I got problem whith CRAM-MD5 auth (works fine with PLAIN): ------------------------------------------------------------------------------ Feb 20 13:15:02 auth(default): Info: new auth connection: pid=5026 Feb 20 13:15:06 auth(default): Info: client in: AUTH 1 CRAM-MD5 service=imap secured lip=87.98.131.8 rip=82.245.64.126 lport=143 rport=1130 Feb 20 13:15:06 auth(default): Info: client out: CONT 1 PDI5NzIzNTE1MTI1MTA3NjAuMTI2NjY2ODEwNkBkZXY+ Feb 20 13:15:07 auth(default): Info: client in: CONT 1 dG9vcm9wQHJlc3B1YmxpY2EuZnIgOTczNjdjMzE3NWE1MWY2YzJhNDY0OTNlNDMzZGZhZDQ= Feb 20 13:15:07 auth(default): Info: vpopmail(toorop(a)domain.tld,82.245.64.126): lookup user=toorop domain=domain.tld Feb 20 13:15:07 auth(default): Info: password(toorop(a)domain.tld,82.245.64.126): Generating CRAM-MD5 from user 'toorop@domain.tld@', password '' Feb 20 13:15:07 auth(default): Info: password(toorop(a)domain.tld,82.245.64.126): Credentials: 00747cf2ffaf11c5ea4a64979c3901fc1d20dee13f480bb598f7d8575b23e61b Feb 20 13:15:07 auth(default): Info: cram-md5(toorop(a)domain.tld,82.245.64.126): password mismatch Feb 20 13:15:09 auth(default): Info: client out: FAIL 1 user=toorop(a)domain.tld Feb 20 13:15:14 imap-login: Info: Aborted login (auth failed, 1 attempts): user=<toorop(a)domain.tld>, method=CRAM-MD5, rip=82.245.64.126, lip=87.98.131.8, TLS ---------------------------------------------------------------------------- This line seems strange: Feb 20 13:15:07 auth(default): Info: password(toorop(a)domain.tld,82.245.64.126): Generating CRAM-MD5 from user 'toorop@domain.tld@', password '' => Why extra @ in user and empty password ?? Client: Thundebird 2.0.0.23 vpopmail version: 5.4.16 dovecot -n # 1.2.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.24-8-pve i686 Gentoo Base System release 1.12.11.1 log_path: /var/log/dovecot.log protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_max_userip_connections(default): 5 mail_max_userip_connections(imap): 5 mail_max_userip_connections(pop3): 10 verbose_proctitle: yes first_valid_uid: 89 last_valid_uid: 89 first_valid_gid: 89 last_valid_gid: 89 mail_location: maildir:~/.maildir maildir_copy_preserve_filename: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 lda: postmaster_address: postmaster(a)domain.tld hostname: dev.domain.eu mail_plugin_dir: /usr/lib/dovecot/lda mail_plugins: sieve sendmail_path: /usr/lib/sendmail auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login cram-md5 verbose: yes debug: yes debug_passwords: yes passdb: driver: vpopmail userdb: driver: vpopmail socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 438 plugin: sieve: ~/.dovecot.sieve sieve_storage: ~/sieve Thanks, -- Toorop

2 2

[Dovecot] v2.0.beta3 released
by Timo Sirainen 22 Feb '10

22 Feb '10

http://dovecot.org/releases/2.0/beta/dovecot-2.0.beta3.tar.gz http://dovecot.org/releases/2.0/beta/dovecot-2.0.beta3.tar.gz.sig I had to break a few APIs in this release to get some other stuff implemented and fixed. And since I had to break some of them, I decided it could be a good time to do some other less necessary API cleanups. This made things again much simpler. I'm hoping to get v2.0.rc1 out in not too distant future. Pretty much the only big missing feature that I wanted to do is being able to add per-protocol auth settings (e.g. protocol smtp { userdb { .. } }), but that doesn't seem to be all that easy to implement. There are of course some bugs still left to be fixed, mainly related to mdbox and dsync. User visible changes: - imap_zlib plugin implements COMPRESS=DEFLATE IMAP extension - zlib plugin: Added support for compressing mails while saving - zlib plugin: fixed reading bzip2 compressed mail files - zlib plugin: Added support for dbox and mdbox formats - mdbox: doveadm purge moves old mails to alt storage (if using alt storage) - added support for tcpwrappers - added support for SHA512 password scheme (by Mark Washenberger) - mailbox deletion is now free of race conditions (e.g. quota calculations). if another session tries to access mailbox before it's fully deleted, it'll get "Mailbox is being deleted" error. - "key = $set" in config file now sets key's value to "set" setting's value. this is probably rather limited outside the only place where I created it for: service { user = $default_internal_user } - default_internal_user and default_login_user settings now specify what users should be used for them. currently the default is still dovecot and dovecot, but I'm hoping to change default_login_user to something else.. - Removed maildir_copy_preserve_filename setting. It's now always tried to be preserved (or rather: message's GUID is preserved) - auth failure penalty tries to avoid increasing penalty for IP if auth is failing always with the same user+password combination. - doveadm penalty command can be used to see the current penalties - login processes: config lookups are now cached, so it no longer asks for configuration from config process every time (except if there are remote {} blocks in config. also the local {} caching could be smarter.) - Tons of mdbox fixes - Tons of dsync fixes, especially with mbox So some of the changes visible to developers are: - dovecot-config file changed. if your external plugin uses this file, you need to change it to use the new format. - added dovecot.m4 file that can be used by external plugins' configure script to get Dovecot settings. This was mainly done by Dennis Schridde. - mailbox_alloc() no longer has stream parameter, instead there's mailbox_open_stream() - mailbox_close() renamed to mailbox_free(). added a different mailbox_close(), which only closes opened mailbox, but doesn't free it. - mailbox_delete(), mailbox_rename() APIs changed - notify plugin's delete/rename API changed as well - mailbox GUID is now looked up using mailbox_get_guid(), not mailbox_status() - dict_iterate*() API changed

2 10

[Dovecot] Migration 1.2.10 -> dovecot-2.0.beta
by Frank Elsner 22 Feb '10

22 Feb '10

Hello *, I've a well functioning dovecot.1.2.10 installation. I'd like to migrate to dovecot.2.0.beta. Is it possible to use one (big) dovecot.conf or must I split it into pieces into directory conf.d? What is the best procedure to convert the configuration file? Any pointers welcome. --Frank Elsner

2 1

[Dovecot] (minor) bug in configure
by Sandro Tosi 22 Feb '10

22 Feb '10

Hello, while reading config options for dovecot v1.2.10 I've noticed a very small bug: # ./configure --help | egrep -- 'Dovecot|--with-gnu-ld' `configure' configures Dovecot 1.2.10 to adapt to many kinds of systems. --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-gnu-ld assume the C compiler uses GNU ld default=no I think the latter entry should be removed. Thanks for considering, Sandro

2 1

[Dovecot] Replication status
by dovecot＠lechtermann.net 22 Feb '10

22 Feb '10

Hello, I couldn't find any recent informations regarding the status of implementing replication to Dovecot. Especially master/master is what I am waiting for. Is it useable yet with 2.0 or, if not, any eta? Thanks in advance, Michael

2 1

[Dovecot] 1/2 OT: Finger mail count
by Marcio Merlone 22 Feb '10

22 Feb '10

Hi all, Is there how to make the finger command retrieve mail count from maildir? Thanks and best regards. -- Marcio Merlone

1 0

[Dovecot] Highly Performance and Availability
by Wayne Thursby 22 Feb '10

22 Feb '10

Hello everyone, I am currently running Dovecot as a high performance solution to a particular kind of problem. My userbase is small, but it murders email servers. The volume is moderate, but message retention requirements are stringent, to put it nicely. Many users receive a high volume of email traffic, but want to keep every message, and *search* them. This produces mail accounts up to 14+GiB. After seeing the failures of my predecessors, I transitioned to Postfix/Dovecot and haven't looked back. Things are running nicely with the below setup. Postfix and Dovecot running on the same virtual machine on a Dell 2950 with 1x Xeon E5440 on ESXi 4. Maildirs served up by 10x146GB 15k RPM SAS drives on RAID-10 via direct attached Dell MD-1000. We are transitioning other services to high availability, and I'm wondering exactly how to provide some kind of near-realtime failover for my Postfix/Dovecot machine. The MD-1000 provides nothing in the way of iSCSI, but it *does* have two SAS connections available, only one of which is in use. I have been looking at the Dell EqualLogic stuff and it seems to provide what we need. I can get most of the information I need from the rep, but I wonder if anyone has any experience with high performance requirements on these kinds of storage. I'd like to continue running my current hardware as the primary mail server, but provide some kind of failover using the SAN. The primary usage of the SAN will be to make our 2TB document store highly available. I'm wondering what kind of options I might have in the way of piggybacking some email failover on this kind of hardware without sacrificing the performance I'm currently enjoying. Is it possible to go with a virtual machine mounted on iSCSI acting as a backup mail server? How would I sync the two, NBD+MD? Any experience doing this with maildirs? I wonder about the performance. Can it be as simple as attaching my MD-1000's second controller to the SAN magic box via SAS and pressing the Easy button? Is it as expensive as running my primary mailserver mounted from the SAN via Fiber Channel? Will that get me under 30ms latency? I welcome any suggestions the group may have. -- Wayne Thursby System Administrator Physicians Group, LLC

5 13

[Dovecot] Best inode_ratio for maildir++ on ext4
by Rodolfo Gonzalez 22 Feb '10

22 Feb '10

Hi, This might be a silly question: which would be the best inode ratio for a 5 Tb filesystem dedicated to Maildir++ storage? I use ubuntu server, which has a preconfigured setting for mkfs.ext4 called "news" with inode_ratio = 4096, and after formating the fs with that setting and then with the defautl setting I see this difference of space (wasted space, but more inodes): 4328633696 free 1K-blocks with mkfs's "-T news" switch = 1219493877 free inodes 4557288800 free 1K-blocks with default mkfs settings = 304873461 free inodes I'll be storing e-mail messages for around 20,000 accounts on that partition (average 512 Mb per account). Would you consider worth the waste of about 200 Gb of the filesystem space in exchange of more inodes? Thanks. Rodolfo.

6 7

[Dovecot] Dovecot setting up SASL/TLS now it will not start
by VaineDragon 22 Feb '10

22 Feb '10

[root@dragon-server dragon]# /etc/init.d/dovecot restart Stopping Dovecot Imap: [FAILED] Starting Dovecot Imap: Error: Error in configuration file /etc/dovecot.conf line 795: Unknown section type (section changed in /etc/dovecot.conf at line 787) Fatal: Invalid configuration in /etc/dovecot.conf Any help will be greatly appreciated. -- View this message in context: http://old.nabble.com/Dovecot-setting-up-SASL-TLS-now-it-will-not-start-tp2… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] enabling IMAP SORT and THREAD extensions
by Colin Brace 21 Feb '10

21 Feb '10

Hi all, The home page of the Dovecot website indicates: "Supports multiple commonly used IMAP extensions, including SORT, THREAD and IDLE." However, I cannot find instructions in the Wiki for how to enable these extensions. Can someone tell me how to do this? I will add this info to the Wiki myself if need be. Thanks. ----- Colin Brace Amsterdam http://lim.nl -- View this message in context: http://old.nabble.com/enabling-IMAP-SORT-and--THREAD-extensions-tp27673898p… Sent from the Dovecot mailing list archive at Nabble.com.

4 4

Re: [Dovecot] Bug#570764: dovecot-common: sieve should allow Return-path header for address test
by Marco Nenciarini 21 Feb '10

21 Feb '10

package dovecot-common forward 570764 dovecot(a)dovecot.org thanks Martin Schwenke ha scritto: > Package: dovecot-common > Version: 1:1.2.10-1 > Severity: normal > > > I attempt to compile the following sieve script... > > martins@bilbo:~/tmp$ cat test.sieve > if address :is "Return-path" "owner-cipe-l(a)inka.de" { > keep; > } > > [Yes, it is useless - a minimal example to illustrate the bug. :-) ] > > ... and I get the following error: > > martins@bilbo:~/tmp$ sievec test.sieve > test: line 1: error: specified header 'Return-path' is not allowed for the address test. > test: error: validation failed. > Error: failed to compile sieve script 'test.sieve' > > This test is included in an example in the Dovecot sieve documentation at: > > http://wiki.dovecot.org/LDA/Sieve#Mail_filtering_by_various_headers > > That seems to suggest that it should work! > > peace & happiness, > martin > > -- System Information: > Debian Release: squeeze/sid > APT prefers testing > APT policy: (990, 'testing') > Architecture: amd64 (x86_64) > > Kernel: Linux 2.6.26-2-amd64 (SMP w/4 CPU cores) > Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) > Shell: /bin/sh linked to /bin/bash > > Versions of packages dovecot-common depends on: > ii adduser 3.112 add and remove users and groups > ii libbz2-1.0 1.0.5-4 high-quality block-sorting file co > ii libc6 2.10.2-2 GNU C Library: Shared libraries > ii libcomerr2 1.41.9-1 common error description library > ii libdb4.8 4.8.26-1 Berkeley v4.8 Database Libraries [ > ii libgssapi-krb5-2 1.8+dfsg~alpha1-5 MIT Kerberos runtime libraries - k > ii libk5crypto3 1.8+dfsg~alpha1-5 MIT Kerberos runtime libraries - C > ii libkrb5-3 1.8+dfsg~alpha1-5 MIT Kerberos runtime libraries > ii libldap-2.4-2 2.4.17-2.1 OpenLDAP libraries > ii libmysqlclient16 5.1.41-3 MySQL database client library > ii libpam-runtime 1.1.1-1 Runtime support for the PAM librar > ii libpam0g 1.1.1-1 Pluggable Authentication Modules l > ii libpq5 8.4.2-2 PostgreSQL C client library > ii libsqlite3-0 3.6.22-1 SQLite 3 shared library > ii libssl0.9.8 0.9.8k-8 SSL shared libraries > ii openssl 0.9.8k-8 Secure Socket Layer (SSL) binary a > ii ucf 3.0025 Update Configuration File: preserv > ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime > > dovecot-common recommends no packages. > > Versions of packages dovecot-common suggests: > ii ntp 1:4.2.4p8+dfsg-1 Network Time Protocol daemon and u > > -- no debconf information > > This bug happen with latest version of sieve patches applied on dovecot 1.2.10. Regards, Marco -- --------------------------------------------------------------------- | Marco Nenciarini | Debian/GNU Linux Developer - Plug Member | | mnencia(a)prato.linux.it | http://www.prato.linux.it/~mnencia | --------------------------------------------------------------------- Key fingerprint = FED9 69C7 9E67 21F5 7D95 5270 6864 730D F095 E5E4

1 0

[Dovecot] Dovecot blog
by Timo Sirainen 20 Feb '10

20 Feb '10

http://blog.dovecot.org/ I was thinking that I could blog about: - ideas for new Dovecot feature designs - when I actually manage to implement some new great feature - maybe some stuff about IMAP/email in general - and maybe whenever I happen to be moving to a different country I wasn't really planning on announcing new releases there. Dovecot feature designs are also sent to Dovecot mailing list, as before. But there have been other things I've thought about mentioning somewhere, but Dovecot ML didn't really seem like the right place. I doubt I'll update the blog very often. But that probably makes it even more useful, since casual readers find the useful stuff quickly. :)

5 5

[Dovecot] Virtual POP3 Inbox question
by Josephus 20 Feb '10

20 Feb '10

Hi, I'm having trouble implementing the virtual pop3 inbox solution in Dovecot 1.2.x. As the following wiki page describes (http://wiki.dovecot.org/Plugins/Virtual) one should only set the inbox=yes flag for the virtual namespace which then flattens all mailboxes in the realmails/ prefix. In the above example when I set the inbox=yes flag for the virtual namespace, the inbox in the realmails/ prefix gets left out for obvious reasons. How did the original author intend this to work? Regards, Jos

2 2

[Dovecot] Dovecot design-question
by Werner 20 Feb '10

20 Feb '10

Hi everybody, we're currently in the process of drafting our new mailserver-setup. Instead of a single-server-setup we'd like to have two equal servers behind a loadbalancer like LVS and shared mailhomes on NFS. We'd like to use dovecot for POP/IMAP, dovecot-deliver as LDA. - It's probably the best idea to direct SMTP and POP/IMAP always to the same server behind the loadbalancer (because dovecot-deliver is used which updates indexes?) - If we think of a "active/passive" setup: dovecot index-files locally or on the nfs-share? - Is it possible to activate loadbalancing for SMTP in this environment if dovecot index-files are held locally on each machine (POP/IMAP is directed only to one of the two servers?) Any comments welcome :-) Werner

3 11

[Dovecot] exporting client socket to postfix
by zhong ming wu 20 Feb '10

20 Feb '10

Dear List, I have a few questions regarding dovecot sasl authentication that are somewhat related to each other. I have a working dovecot config with ---------- ssl_verify_client_cert = yes .. . ssl_require_client_cert = yes ssl_username_from_cert = yes --------------- (With this set up I need not set a correct user name in my mail client so long as I have it correctly in cert.) It turns out that I cannot export client socket to postfix to do smtp authentication unless I comment out ssl_require_client_cert=yes Does it mean that postfix is not passing to dovecot any information about certificate? Is passing certificate information not part of sasl framework? If so I won't be able to use it with a different sasl implementation. Also if I comment out ssl_require_client_cert=yes, then I can no longer use username from cert to log in to retrieve my pop mail. I prefer to get username this way otherwise my thunderbird mailbox reads user@domain.org@domain.org; I could have more than one domain in my dovecot servers. Thanks mr.wu

1 0

[Dovecot] passing parameters to deliver
by kjonca＠wp.pl 20 Feb '10

20 Feb '10

Is any posibility to pass parameters/environment variables to deliver with sieve plugin? I have some procmail rules to decide where mail should go, which can't be migrated to sieve (uses external programs). So far I write it to maildirs, but I wonder to migrate to mdbox, and procmail can't handle it. Any ideas? KJ -- http://modnebzdury.wordpress.com/2009/10/01/niewiarygodny-list-prof-majewsk… można nie mieć nawet żadnego sensownego argumentu, a dzięki odpowiedniej gestykulacji stworzyć poczucie wiarygodności. Puls Biznesu

5 6

[Dovecot] Feature request? Make deliver quota inclusive!
by Joachim Boltz 19 Feb '10

19 Feb '10

hi all, I'd like to make deliver put mail into a nearly full mailbox even when they become overquota as a result. The same problem came up a few weeks ago: http://dovecot.org/list/dovecot/2010-January/045695.html Since no solution was offered may I suggest this topic as an additional feature for future releases? ;-) This is a important for me because sometimes users are lazy. They think "oh, still 10% left, no reason to delete mail" while in the meantime large messages are already bounced, while some small ones arrive in the users inbox. cheers, achim

7 19

[Dovecot] Client behaviour with sieve
by Koenraad Lelong 19 Feb '10

19 Feb '10

Hi, I have a working dovecot imap-server, with sieve. I find it odd that my mail-clients (Thunderbird 2 and 3) don't report anything that's new in the folders. What I mean is this : Postfix get's a mail and hands it over to dovecot's LDA and sieve moves it to a folder. When I log in with Thunderbird, I see new messages in my Inbox. But that message that was moved to a folder is "invisible" until I click on the folder. Then Thunderbird sees there are new messages in that folder and reports the number of new messages and makes the foldername bold. Is this the expected behaviour ? Or did I configure something wrong ? Thanks for any clarification. Regards, Koenraad Lelong.

6 6

[Dovecot] wish now I'd not upgraded...
by Stan Hoeppner 19 Feb '10

19 Feb '10

Upgraded from Debian Dovecot 1.0.15 to Debian Dovecot 1.2.10-1~bpo50+1. I use Postfix local delivery to and Dovecot mbox. As per upgrade directions, I stopped dovecot processes and deleted all dovecot.index.cache files in /home/%user/mail/.imap. Performed upgrade to 1.2.10-1~bpo50+1. Modified new dovecot.conf for my environment. Started dovecot. Problem: Instantly noticed in TB 3.0.1 Win32 that all emails in all folders were marked as unread. Stopped TB, stopped dovecot, deleted *all* files in /home/%user/mail/imap/ so indexes and caches could be rebuilt from scratch. Started dovecot, started TB. Same problem. Then I got ugly, stopped TB and dovecot, deleted all ~.imap/ files *and* deleted *all* TB cache and index files with a time stamp of today. Restarted dovecot, restarted TB. Same damn problem. I sit hit right clicking folder after folder and selecting "mark as read", only to see all the emails in the folder go "read" and then within seconds go back to marked as unread (bold). Opening messages one at a time and moving to the next doesn't even keep them marked as read. WTF is going on? Why won't they stay marked as read? I've got over 25,000 emails in these folders and I get a few hundred list mails a day. I really need to get this read/unread business straightened out. What the heck am I missing? Is this a bug in the Debian backport? Good thing I have no hair or I'd have pulled half of it out by now... -- Stan

7 16

[Dovecot] quota plugin + setting in "protocol" or "lda"
by maximatt 19 Feb '10

19 Feb '10

hi... which are the diference to configure quota plugin when LDA is dovecot: these setting: protocol imap { : mail_plugins = quota imap_quota : } protocol pop3 { : mail_plugins = quota : } .vs. these setting: protocol lda { : mail_plugins = quota : } Note: - dovecot version is 1.2.0 thanks in advance!! -- Salu2 ;)

2 1

[Dovecot] quota problem
by Andre Hübner 19 Feb '10

19 Feb '10

dovecot 1.0.15 Hello, i try to set quota settings for my users. currentyl i use a mysql table for auth process and now i want to add quotasettings for each individual user. at the moment i have the problem that only global quota is effective and no userquota which is stored in usertable. This is my mysql-usertable: login varchar(255) password varchar(64) home varchar(128) uid int(11) gid int(11) quota_kb varchar(10) active char(1) In my main-dovecot.conf i have quota/imap_quota activated for pop/imap and protocol lda This is the auth-section which contains passdb/userdb auth default { mechanisms = plain login passdb sql { args = /etc/dovecot-sql.conf } userdb sql { args = /etc/dovecot-sql.conf } user = root socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } socket listen { client { path = /var/run/dovecot/auth-master mode = 0755 user = nobody } } } SQL-queries in /etc/dovecot-sql.conf (connection itselfs is ok, auth per mysql is working already) password_query = SELECT login as user, password, home as userdb_home, uid as userdb_uid, gid as userdb_gid FROM mail_users WHERE login = '%u' AND active='Y' user_query = SELECT login as user, home, uid, gid, concat('dirsize:storage=', quota_kb) AS quota FROM mail_users WHERE login = '%u' I think there is something missing in my conf but have no idea what it could be. I need a little hint please. Thanks, Andre

4 11

[Dovecot] auth processes
by Stan Hoeppner 19 Feb '10

19 Feb '10

With 1.0.15 my configuration I a single dovecot-auth process, which is what I want now. Since upgrading to 1.2.10 I have two such processes: root 16992 16990 0 Feb15 ? 00:00:00 dovecot-auth root 16997 16990 0 Feb15 ? 00:00:00 dovecot-auth -w I can't seem to tweak dovecot.conf to get this down to one auth process again. I've tried setting each of these below to 0, which resulted in either none, or one auth process. In the case of the one auth process, T-Bird wasn't working correctly, although it presented no pop up or other errors. When I'd click an IMAP folder it would just show whitespace and never pull up the emails. auth_worker_max_count = # Number of authentication processes to create count = This is an extremely low volume host, and I'm an efficiency freak. I don't like having "unnecessary" processes running if it is at all possible to avoid it. Given my IMAP user load, I know for a fact that I should only need one auth process, and for that matter, given my load, running all the dovecot processes from inetd is even a valid option, although I've not yet attempted that. Any ideas? Thanks. -- Stan

3 7