- dovecot - dovecot.org

[Dovecot] dovecot and firstname.initial.lastname mbox format archive
by Wilko Bulte 19 Feb '10

19 Feb '10

hi Today I have been in a puzzling fight with 2 dovecot versions that I would like to ask some comments on. The situation is this: - I have a considerable mail archive in mbox format (yes, I know, but that is what I have..). - My mail reader is mutt 1.5.20 by the way. - Some of these mbox files have names like firstname.initial.lastname Note the . seperating the parts of the email-ers name. - On my old system I have dovecot v 1.1.7 which has always worked flawless - On my new system I have dovecot v 1.2.8 which refuses to handle these dot-seperated files. I get the somewhat familiar "Mailbox doesn't allow inferior mailboxes". On a not-previously-existing mbox dovecot 1.2.8 produces the directory hierarchy thing: firstname -> initial -> lastname - I am using the same dovecot.conf on v.1.1.7 and v.1.2.8 Can anyone tell me if v1.2.8 no longer is able to do what v1.1.7 did? And what I dearly would like to get working :-( And if it can, what should I put in dovecot.conf to make that happen? thanks, Wilko -- wilko(a)FreeBSD.org

2 8

[Dovecot] 2nd REPOST: mbox vs maildir
by Ashley M. Kirchner 18 Feb '10

18 Feb '10

I'm going to assume this is just not possible, or that no one has an answer, which would lead me back to uw-imap since it does work as-is. So I'll post it again, hoping that there is a solution for this setup and that folks have just been too busy to help think about it and/or help come up with a possible solution. ----- Ignoring my previous message just for a second, I realized that my config wasn't correct. First the layout: ~mail/ ~mail/Drafts ~mail/Ashley-Feb09 ~mail/Others-Feb09 ~mail-Archives/ ~mail-Archives/2009/ ~mail-Archives/2009/Ashley/ ~mail-Archives/2009/Ashley/Ashley-Dec09 ~mail-Archives/2009/Ashley/Ashley-Nov09 ~mail-Archives/2009/Ashley/Ashley-Oct09 So I (now) have this for namespaces: namespace private { separator = / prefix = "mail/" location = mbox:~/mail:INBOX=/var/mail/%u inbox = yes hidden = no list = yes # for v1.1+ } namespace private { separator = / prefix = "mail-Archives/" location = maildir:~/mail-Archives:LAYOUT=fs inbox = no hidden = no list = yes subscriptions = yes } But when I'm in Thunderbird and I try to subscribe to anything that falls inside of ~/mail-Archives/ it won't work. I can browser all the way down to the folder, but I can't see anything within that folder. For example, consider the full path to the following 'Ashley-Dec09' mailbox: ~mail-Archives/2009/Ashley/Ashley-Dec09 In Thunderbird, when I hit 'Subscribe' I can browse down to '2009' and I can see 'Ashley', but I can't drill down into it and subscribe to 'Ashley-Jan09'. What am I missing here?

3 13

[Dovecot] LDAP as password database - some problems / suggestions
by Stefan Palme 18 Feb '10

18 Feb '10

Hi all, Using dovecot-1.2.6, I use dovecot with an LDAP backend for user authentication. In general this works ok, but I have some issues with this... In LDAP, I have users like this: dn:cn=user1,ou=users,dc=kapott,dc=org dn:cn=user2,ou=users,dc=kapott,dc=org etc. When authenticating users, I explicitely want to use the AUTH_BIND feature (and NOT lookup passwords). My problem: not ALL users from the LDAP system should be allowed to use the IMAP server. Currently, I have defined an auth_bind_userdn of "cn=%u,ou=users,dc=kapott,dc=org" in dovecot-ldap.conf, but with this, user1 AND user2 could login (but I don't want user2 to be able to use dovecot). Because the LDAP system is used in a larger environment, it is NOT possible to re-arrange the users like this: cn=user1,ou=dovecot,ou=users,dc=kapott,dc=org cn=user2,ou=not_dovecot,ou=users,dc=kapott,dc=org So my question: are there any plans to support group-based LDAP authentication? For several other application, I have something like this: dn:cn=dovecot,ou=groups,dc=kapott,dc=org objectclass:groupOfNames member:cn=user1,ou=users,dc=kapott,dc=org So I can define groups of user accounts - one group per application. A nice solution for this in dovecot would be, if I could "mix" password lookup and authentication bind: First, a search query should be used to find a valid DN to bind as. In my case, the search query could look like this: base="ou=groups,dc=kapott.org" filter="(&(cn=dovecot)(member=cn=%u,ou=users,dc=kapott,dc=org))" result_attribute="member" After finding a DN this way (via attribute "member"), I want to use auth_bind to use this DN for password verification... Any hints how to solve this? Any plans to support this in the future? Thanks and regards -stefan-

4 7

[Dovecot] improved create dovecot certificate script
by Roger Oot 18 Feb '10

18 Feb '10

If anybody is interested, which they are probably not, here is an improved and more rigorous version of mkcert.sh #! /bin/sh #*****************************************************************************# #| #| file : /root/apps/share/sh/create_dovecot_certificate #| #*---------------------------------------------------------------------------*# BELL="\007" DOVECOT_DIR="${DOVECOT_DIR-/var/lib/dovecot}" OPENSSL="${OPENSSL-openssl}" OPENSSL_CONF="${OPENSSL_CONF-/etc/dovecot/dovecot-openssl.cnf}" #.............................................................................# certificates_dir="${DOVECOT_DIR}/certificates" echo="/bin/echo -e" error="${BELL}%ERROR -" #*---------------------------------------------------------------------------*# check_directory () { directory="${1}" #.............................................................................# if [ $ ! \( -d "${directory}" $ \) ] then mkdir -m 700 "${directory}" 2> /dev/null status=${?} if [ ${status} -ne 0 ] then ${echo} "${error} directory ${directory} cannot be created!" >&2 exit 2 fi chgrp dovecot "${directory}" fi #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# check_executable () { executable="${1}" #.............................................................................# if [ $ ! \( -x "`which ${executable} 2> /dev/null`" $ \) ] then ${echo} "${error} executable ${executable} could not be found!" >&2 exit 1 fi #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# check_exists () { file="${1}" description="${2}" #.............................................................................# if [ -e "${file}" ] then test "${description}" = "public certificate" && echo ${echo} \ "${error} ${description} file ${file} already exists!" >&2 test "${description}" = "public certificate" && \ show_certificate "${certificate}" exit 6 fi #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# check_file () { file="${1}" description="${2}" #.............................................................................# if [ $ ! \( -e "${file}" $ \) ] then ${echo} "${error} ${description} file ${file} does not exist!" >&2 exit 3 fi if [ $ ! \( -f "${file}" $ \) ] then ${echo} "${error} ${description} ${file} is not a file!" >&2 exit 4 fi if [ $ ! \( -s "${file}" $ \) ] then ${echo} "${error} ${description} file ${file} is empty!" >&2 exit 5 fi #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# create_certificate () { configuration="${1}" directory="${2}" #.............................................................................# name="`hostname -f | tr '[A-Z]' '[a-z]' | tr '.' '_'`-dovecot" certificate="${directory}/${name}.crt" check_exists "${certificate}" "public certificate" key="${directory}/${name}.pem" check_exists "${key}" "private key" #.............................................................................# ${echo} "\nCreating new X509 certificate\n\ with configuration ${configuration}\nfor ${name} ...\n" ${OPENSSL} req -new -x509 -nodes -config "${configuration}" \ -days 365 -out "${certificate}" -keyout "${key}" status=${?} if [ ${status} -ne 0 ] then ${echo} "${error} ${OPENSSL} failed with exit status ${status}!" >&2 exit 7 fi #.............................................................................# chmod 0400 "${key}" chmod 0444 "${certificate}" #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# show_certificate () { certificate="${1}" #.............................................................................# echo ${OPENSSL} x509 -in "${certificate}" -noout -dates echo ${OPENSSL} x509 -in "${certificate}" -noout -serial echo ${OPENSSL} x509 -in "${certificate}" -noout -subject echo #.............................................................................# return 0 } #*---------------------------------------------------------------------------*# check_executable "${OPENSSL}" check_file "${OPENSSL_CONF}" "openssl configuration" check_directory "${DOVECOT_DIR}" check_directory "${certificates_dir}" create_certificate "${OPENSSL_CONF}" "${certificates_dir}" #.............................................................................# exit 0 #*****************************************************************************#

1 0

[Dovecot] dovecot-sieve and ldap user
by spamvoll＠googlemail.com 18 Feb '10

18 Feb '10

hi.. im running dovecor 1.2.10 and dovecot-sieve 0.1.15 protocol lda { .. mail_plugins = sieve } plugin { ... sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } cat .dovecot.sieve require "fileinto"; if header :contains "subject" ["VIRUS"] { fileinto "VIRUS"; } else { keep; } But mails dont get moved. I use the master.cf to get postfix to use deliver dovecot unix - n n - 10 pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -d ${recipient} dovecot -n # 1.2.10: /etc/dovecot.conf # OS: Linux 2.6.18-164.10.1.el5 i686 CentOS release 5.4 (Final) protocols: imaps ssl: required login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login first_valid_uid: 10000 last_valid_uid: 10000 first_valid_gid: 10000 last_valid_gid: 10000 mail_uid: vmail mail_gid: vmail lda: postmaster_address: postmaster(a)example.com mail_plugins: sieve auth_socket_path: /var/run/dovecot/auth-master auth default: passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: passwd userdb: driver: ldap args: /etc/dovecot-ldap.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve Does the sieve plugin use the home_dir returned from the ldap ? And is it ok to use the deliver in master.cf and or do i have to set mailbox_command = /usr/lib/dovecot/deliver ?

2 1

[Dovecot] Disabling Keywords
by Tony Rutherford 18 Feb '10

18 Feb '10

Is there a correct way to tell the client we don't want, and don't support Keywords via a configuration option? If there's no configuration option, would I override "allow_new_keywords" to just return FALSE? Thanks, Tony

2 3

[Dovecot] Courier->Dovecot Migration Issue
by Tony Rutherford 18 Feb '10

18 Feb '10

For testing purposes, on a small set of users, we've run the courier-dovecot-migrate.pl script. We are converting from Courier 0.43 to Dovecot 1.2.9. For the most part, things seem to be ok. However, an iPhone IMAP client user is reporting a problem where some of her messages don't show up. Even stranger is the fact that these same messages do appear when using Outlook 2k7 for instance. The common denominator for when the messages are missing seems to be whether or not the message appeared in both the Courier IMAP and Courier POP3 uid files. The missing messages appear in the CourierIMAP file, but NOT the Courier POP file. Here is a snippet from the resulting Dovecot-uidlist file: 3 V1141844265 N12392 9338 P00cf2eb6_fadc_4992_ad3a_57cc83a16eab W5146 :00cf2eb6_fadc_4992_ad3a_57cc83a16eab:2,S 9788 P0b18a2d6_97dd_4712_a09c_23c7a3d59467 W4055 :0b18a2d6_97dd_4712_a09c_23c7a3d59467:2,S 9942 P0b3cfd0b_1fc7_47b3_805f_b369a3bb6c65 W4359 :0b3cfd0b_1fc7_47b3_805f_b369a3bb6c65:2,S 10100 Pe178f1ed_d648_47e8_807a_3e2d655d7f84 W12028 :e178f1ed_d648_47e8_807a_3e2d655d7f84:2,S 10101 Pe3f28a53_a4d4_4f3d_babe_5df72bc35b47 W13974 :e3f28a53_a4d4_4f3d_babe_5df72bc35b47:2,S 10102 Pf3c3024b_2850_43ef_a397_d5cae5c8f537 W7177 :f3c3024b_2850_43ef_a397_d5cae5c8f537:2,S 10104 P6e808a68_0a7b_4528_aa67_4cc16361c56b W10817 :6e808a68_0a7b_4528_aa67_4cc16361c56b:2,S 10105 P65c8218d_7b2a_43b7_82a4_2743025bd954 W3579 :65c8218d_7b2a_43b7_82a4_2743025bd954:2,S 10106 P963cc43e_0355_481e_99d5_5468708bc28f W6410 :963cc43e_0355_481e_99d5_5468708bc28f:2,S 10107 P1405aefc_b98b_4a35_a7dd_a69199f724d0 W4703 :1405aefc_b98b_4a35_a7dd_a69199f724d0:2,S 10108 P67908fad_ec0a_4786_b0f1_c7cfaa23d09a W127288 :67908fad_ec0a_4786_b0f1_c7cfaa23d09a:2,S 10109 :9176f3b2_1927_4657_baa8_bfe4c39e89d4:2,S 10110 :79047185_aef7_48ec_aff2_6b71bd566acd:2,S 10111 :efe275a0_a7a8_4f47_b638_45a18bc0b108:2,S The last three entries exist in the Courier IMAP file, but NOT the Courier POP file. The resulting dovecot-uidlist format is different, but to be honest, I haven't been able to find the exact specification for the format of the dovecot-uidlist file (if it exists). What is really strange to me is: If there was a problem with the migration script and resulting dovecot-uidlist file, why would these messages show up fine in some client (ex. Outlook) and not others (ex. iPhone). Regards, Tony

2 6

[Dovecot] Virtual mailboxes show up twice
by Matthijs Kooijman 18 Feb '10

18 Feb '10

Hi all, I've been struggling a bit getting Hastymail webmail to work with my virtual mailboxes. After a while, I discovered that my virtual mailboxes are listed twice: Once with \NoSelect and once without. See the following (partial) LIST reponse: * LIST (\Noselect \HasChildren) "/" "virtual" * LIST (\Noselect \HasNoChildren) "/" "virtual/foo" ... * LIST (\HasNoChildren) "/" "virtual/foo" This makes somewhat sense, since my "virtual" namespace is a subdir of my default namespace: mail_location = Maildir:~/Mail:LAYOUT=fs # Default namespace, uses mail_location above namespace private { prefix = separator = / inbox = yes } # Virtual mailboxes namespace private { prefix = virtual/ separator = / # Store virtual mailbox in a "virtual" subdirectory. We use the fs layout, # so nesting of mailboxes is done using normal filesystem nesting. location = virtual:~/Mail/virtual:LAYOUT=fs } Now, should dovecot handle this configuration transparently by hiding the virtual directory from the default namespace, or is this configuration just not supported and should the virtual directory be outside of ~/Mail? The current wiki documentation on the virtual plugin currently does suggest this configuration, its examples point to ~/Maildir/virtual. Gr. Matthijs

2 1

[Dovecot] configuring overquota message
by Leonardo Rodrigues 18 Feb '10

18 Feb '10

From dovecot 1.2.10 sources i have: src/plugins/quota/quota.c #define DEFAULT_QUOTA_EXCEEDED_MSG \ "Quota exceeded (mailbox for user is full)" struct quota_settings *quota_settings_init(void) { [ .... ] quota_set->quota_exceeded_msg = getenv("QUOTA_EXCEEDED_MESSAGE"); if (quota_set->quota_exceeded_msg == NULL) quota_set->quota_exceeded_msg = DEFAULT_QUOTA_EXCEEDED_MSG; [ .... ] but i havent found, in all the sources, where the QUOTA_EXCEEDED_MESSAGE is feeded by something from dovecot.conf or anywhere else. question is: isnt it possible to configure the quota exceeded message from dovecot.conf ?? Do i really need to rebuild dovecot changing the message on quota.c for acchieving that ? -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

2 2

[Dovecot] Get some headers Variables
by Alex Baule 18 Feb '10

18 Feb '10

Hello Everyone again !! I'm putting more functions in my plugin, and would need to access a value of one variable that is going to put in the header, how can I get this value by dovecot? example, I have the header: X-ThereisMy: yes How can I get this value inside a plugin ? There is something like getHeaderVar("X-ThereisMy") ?

2 1

[Dovecot] How to configure Lazyexpunge plugin?
by CoolAtt NNA 18 Feb '10

18 Feb '10

Hi, I tried the plugin but it is not working. Am using virtual mailboxes. I added the following in dovecot.conf then restarted dovecot. Please guide me to the correct configuration. ############################## namespace private { prefix = separator = / inbox = yes } # namespace for lazy_expunge plugin: namespace private { prefix = .EXPUNGED/ separator = / location = maildir:~/Maildir/expunged } protocol imap { mail_plugins = lazy_expunge } plugin { lazy_expunge = .EXPUNGED/ }################################# _________________________________________________________________ Hotmail: Powerful Free email with security by Microsoft. https://signup.live.com/signup.aspx?id=60969

2 1

[Dovecot] 1.2 , mail_location & mbox_snarf
by Laurent Moineau 18 Feb '10

18 Feb '10

Hello, I'm currently running 1.1.20 and I'm planning to upgrade to 1.2.10 I've read carefully the wiki page "Upgrading Dovecot v1.1 to v1.2" and a few messages concerning mail_location parameter but I still don't know what to change in my configuration in order to keep it working after the upgrade. I'm using mbox format and mbox_snarf plugin. dovecot -n : protocols: imaps pop3 pop3s listen: * ssl_cert_file: /etc/pki/tls/certs/ipop3d.pem ssl_key_file: /etc/pki/tls/certs/ipop3d.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_privileged_group: mail mail_gid: 12 mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u mbox_lazy_writes: no mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): mbox_snarf mail_plugins(imap): mbox_snarf mail_plugins(pop3): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 lda: postmaster_address: postmaster(a)example.com auth default: debug: yes passdb: driver: pam userdb: driver: passwd plugin: mbox_snarf: %h/mail/INBOX Any help would be appreciated. Thanx. Laurent Moineau

2 1

[Dovecot] Problem in sharing mailboxes across users
by Rampage 18 Feb '10

18 Feb '10

Hello everyone, I'm trying to configure dovecot to allow users to share their imap folders. I've followed the wiki and i'm near to accomplish my tasks, when i set ACL properly on folders using imap commands the other user can see the folder as shared, but i can't subscribe to it or even access its content using any email client (like thunderbird) couse it looks like the path to the shared folder is not complete. i mean when i go to "manage subscriptions" i can see the shared folder from the other users as "shared/user@domain/sharedfoldername" but since only "sharedfoldername" is present i cant subscribe to it. am i missing somethimg? like do i need to setup a particular directory tree on the filesystem? thnx in advice for your help. Best regards. Francesco.

2 8

[Dovecot] Problem with allow_nets passdb parameter and Postfix
by Неворотин Вадим 18 Feb '10

18 Feb '10

I use Dovecot for SASL authentication from Postfix. In Postfix main.cf I have: smtpd_sasl_type = dovecot It works good, but now I need to allow users to connect by IMAP only from given IP adresses. I've added extra field allow_nets to passdb in Dovecot, and IMAP authentication works fine. But now I can't connect to my SMTP server because when smtpd ask dovecot about user authentification, dovecot always denied it. Even if I try to connect to SMTP from correct IP, listed in allow_nets for user. In dovecot log I have messages about incorrect ip like this: dovecot: 2010-02-15 13:28:51 Info: auth(default): passwd-file(malamut): lookup: user=malamut file=/etc/dovecot/temp.users dovecot: 2010-02-15 13:28:51 Info: auth(default): passdb(malamut): allow_nets check failed: Remote IP not known dovecot: 2010-02-15 13:28:53 Info: auth(default): client out: FAIL 7 user=malamut Problem is clear: smtpd don't send client IP to dovecot authentication socket. But I need to limit the ability of connection to users only from specific IP. Both for SMTP and IMAP. How can I do that? I use dovecot 1.0.15 and Postfix 2.5.5 on Debian Lenny.

2 3

[Dovecot] deliver problem ( Error: file_dotlock_create )
by Frank Bonnet 18 Feb '10

18 Feb '10

Hello all ( Postfix and Dovecot ) Trying to use deliver as mailbox_command with Postfix I get this error each time an email is arriving deliver(xxxxxxxx): Error: file_dotlock_create(/var/mail/xxxxxxxx) failed: Permission denied (euid=3003(xxxxxxxx) egid=3010(smig) missing +w perm: /var/mail) (set mail_privileged_group=mail) Doea this means I have to chmod 777 the /var/mail directory ? Thanks a lot

2 1

[Dovecot] dovecot v1.2.10 + unknown mail_uid parameter
by maximatt 18 Feb '10

18 Feb '10

hi... i upgrading dovecot from v1.0.7 to v1.2.10, so i perform some modifications (http://wiki.dovecot.org/Upgrading/1.1 and http://wiki.dovecot.org/Upgrading/1.2) but i have the following problem when i want to test installation: in dovecot.conf, i set the user mail: mail_uid= 72940 mail_gid= 72941 but when i try to start dovecot i have the following error: # sbin/dovecot Error: Error in configuration file /etc/dovecot/etc/dovecot.conf line 962: Unknown setting: mail_uid Fatal: Invalid configuration in /etc/dovecot/etc/dovecot.conf # sbin/dovecot --version 1.2.10 i try, but i dont know how to fix them :( thanks in advance! :) -- Salu2 ;)

2 1

[Dovecot] quick question
by David Halik 18 Feb '10

18 Feb '10

Timo (and anyone else who feels like chiming in), I was just wondering if you'd be able to tell me if the amount of corruption I see on a daily basis is what you consider "average" for our current setup and traffic. Now that we are no longer experiencing any core dumps with the latest patches since our migration from courier two months ago, I'd like to know what is expected as operational norms. Prior to this we had never used Dovecot, so I have nothing to go on. Our physical setup is 10 Centos 5.4 x86_64 IMAP/POP servers, all with the same NFS backend where the index, control, and Maildir's for the users reside. Accessing this are direct connections from clients, plus multiple squirrelmail webservers, and pine users, all at the same time with layer4 switch connection load balancing. Each server has an average of about 400 connections, for a total of around concurrent 4000 during a normal business day. This is out of a possible user population of about 15,000. All our dovecot servers syslog to one machine, and on average I see about 50-75 instances of file corruption per day. I'm not counting each line, since some instances of corruption generate a log message for each uid that's wrong. This is just me counting "user A was corrupted once at 10:00, user B was corrupted at 10:25" for example. Examples of the corruption are as follows: ########### Corrupted transaction log file ..../dovecot/.INBOX/dovecot.index.log seq 28: Invalid transaction log size (32692 vs 32800): ...../dovecot/.INBOX/dovecot.index.log (sync_offset=32692) Corrupted index cache file ...../dovecot/.Sent Messages/dovecot.index.cache: Corrupted physical size for uid=624: 0 != 53490263 Corrupted transaction log file ..../dovecot/.INBOX/dovecot.index.log seq 66: Unexpected garbage at EOF (sync_offset=21608) Corrupted transaction log file ...../dovecot/.Trash.RFA/dovecot.index.log seq 2: indexid changed 1264098644 -> 1264098664 (sync_offset=0) Corrupted index cache file ...../dovecot/.INBOX/dovecot.index.cache: invalid record size Corrupted index cache file ...../dovecot/.INBOX/dovecot.index.cache: field index too large (33 >= 19) Corrupted transaction log file ..../dovecot/.INBOX/dovecot.index.log seq 40: record size too small (type=0x0, offset=5788, size=0) (sync_offset=5812) ########## These are most of the unique messages I could find, although the majority are the same as the first two I posted. So, my question, is this normal for a setup such as ours? I've been arguing with my boss over this since the switch. My opinion is that with a setup such as ours where a user can be logged in using Thunderbird, Squirrelmail, and their Blackberry all concurrently at the same time, there will always be the occasional index/log corruption. Unfortunately, he is of the opinion that there should rarely be any and there is a design flaw in how Dovecot is designed to work with multiple services with an NFS backend. What has been your experience so far? Thanks, -Dave -- ================================ David Halik System Administrator OIT-CSS Rutgers University dhalik(a)jla.rutgers.edu ================================

7 44

[Dovecot] Anyone successfully setup Continous Backup of mailboxes using rsync ?
by CoolAtt NNA 18 Feb '10

18 Feb '10

Hi All.. Am working on continous backup of mailboxes using rsync(for e.g by running rsync every 2 min) Things gets more complicated when users create Subfolders in INBOX , SENT , etc.. If anyone among you did that plz guide & advise. Thanks CoolAtt _________________________________________________________________ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. https://signup.live.com/signup.aspx?id=60969

17 41

[Dovecot] dovecot-sieve vacation vs qmail-ldap
by Lazy 18 Feb '10

18 Feb '10

Helloo, We are using dovectot lda with qmail-ldap, dovecot 1.2.10, sieve 0.1.15 lda is executed as exec /var/qmail/bin/preline -f /usr/local/dovecot/libexec/dovecot/deliver -s preline adds Delivered-To: header, everything works fine except vacation Feb 9 16:07:16 thebe dovecot: deliver(lazy): sieve: msgid=unspecified: discarding vacation response for message implicitly delivered to <lazy(a)thebe.org> Feb 9 16:07:16 thebe dovecot: deliver(lazy): sieve: msgid=unspecified: stored mail into mailbox 'INBOX' thebe.org is the hostname of the machine, oryginal recipient address has other domain .dovecot.sieve file looks like this require ["vacation"]; #autoresponder vacation :days 1 :subject "Auto Reply / Odpowiedz automatyczna" "aaaaaaaaaaaaaaaaaaaaa"; I did experiments with :addresses ["*"] without any luck. deliver only gets user and HOME directory form env variables provided by qmail, so it's unaware of the target email address. How to fix it ? I was thinking about deliver extracting target address from Delivered-To: header added by qmail's preline, or use DTLINE env variable, whitch qmail populates with Delivered-To header.

2 2

[Dovecot] Dovecot 1.2.8 problem on AIX
by Jonathan Siegle 18 Feb '10

18 Feb '10

Running revision 9492:3efdbaab2960(Mon Nov 23) on AIX 5.3. I run dovecot out of inetd. Every once in a while I get the following error: Dovecot is already running with PID 2592842 (read from /usr/ladmin/dovecot-1.2.8/var/run/dovecot/master.pid) when I try to connect to the imap port. -Jonathan

3 2

[Dovecot] using signed certificates for TLS/SSL
by Leonardo Rodrigues 18 Feb '10

18 Feb '10

Hi, I have, in one customer, a web server running on a Verisign-signed certificate SSL certificate. Everything works fine, IE and Firefox connects on https without asking anything, which usually happens on self-signed certificates. I'm trying to use that certificate on dovecot, but clients (Thunderbird basically) keeps saying the certificate is not valid. yes i'm using, when configuring Thunderbird, the same CN that was signed by Verisign for the web usage i've enabled verbose_ssl and got when thunderbird tries to connect: Feb 18 12:32:02 correio dovecot: imap-login: Disconnected (no auth attempts): rip=201.86.xxx.xxx, lip=192.168.1.2, TLS handshaking: SSL_accept() failed: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca unknown CA ??? is that Thunderbird that is not recognizing the Verisign-signed certificate ? Do i need to, somehow, install some Verisign CA certificate in dovecot.conf ? when using a self-signed certificate, i also get an SSL_accept failed, but with different message: Feb 18 12:41:45 correio dovecot: imap-login: Disconnected (no auth attempts): rip=201.86.191.114, lip=192.168.1.2, TLS handshaking: SSL_accept() failed: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate despite the fact my certificates were generated for use with Apache, i can 'print' them, both of them, with the same commands i use to print dovecot generated certificates, with mkcert.sh. So, it seems they are compatible. if i click OK on Thunderbird, when using my Verisign-signed certificates, everything works and i do got TLS logs: Feb 18 12:23:36 correio dovecot: imap-login: Login: user=<user(a)domain.com.br>, method=PLAIN, rip=201.86.xx.xx, lip=192.168.1.2, TLS, TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits) Feb 18 12:31:43 correio dovecot: imap-login: Login: user=<user(a)domain.com.br>, method=PLAIN, rip=201.86.xx.xx, lip=192.168.1.2, TLS, TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits) what am i doing wrong ?? or using a signed-certificate for WEB usage is not possible on dovecot ? -- Atenciosamente / Sincerily, Leonardo Rodrigues Solutti Tecnologia http://www.solutti.com.br Minha armadilha de SPAM, NÃO mandem email gertrudes(a)solutti.com.br My SPAMTRAP, do not email it

3 3

[Dovecot] revision control on maildir possible?
by Markus Beyer 18 Feb '10

18 Feb '10

Hi, I was wondering if it is possible to put a dovecot managed maildir under a vcs like system, for example git or bzr. I'd like to have a seamless history of all mail going in and out of my mailboxes, so a vcs like system seams a good choice for me. I'm not quite sure however if that would cause any problems to dovecot and what the best way of handling commits would be. If anyone on the list got any pointers regarding this, it would be much apprechiated. Best regards, Markus -- Sicherer, schneller und einfacher. Die aktuellen Internet-Browser - jetzt kostenlos herunterladen! http://portal.gmx.net/de/go/atbrowser

3 2

[Dovecot] tls not working on ubuntu
by zhong ming wu 18 Feb '10

18 Feb '10

Hello List, I'm new to dovecot. I have sucessfully configured dovecot with just virtual users on a centos linux box to my satisfaction; I can connect with TLS with disable_plaintext_auth = yes. This dovecot is also version > 1. Can't post exact version right now but it's what comes with Centos 5.4. On a Ubuntu 9.10 box here, I cannot connect with TLS (port 110) but I can connect with plain SSL (port 995). The config files between centos and ubuntu boxes are the same except for minor details. The following is the log entry Feb 17 21:38:18 ubuntu dovecot: pop3-login: Disconnected (no auth attempts): rip=192.168.0.101, lip=192.168.0.108 The output below is from a binary compiled from source. I have also tested with 1.1.11 (that I get from apt-get install) with the same config file. I have tested ubuntu with both Thunderbird 3 and thunderbird 2. I have also searched google as well as dovecot website. Thanks mr.wu # 1.2.10: /usr/local/etc/dovecot.conf # OS: Linux 2.6.31-14-server x86_64 Ubuntu 9.10 ext4 base_dir: /var/run/dovecot/ protocols: pop3 pop3s listen: 192.168.0.108 ssl_cert_file: /usr/local/etc/pop.crt ssl_key_file: /usr/local/etc/pop.key ssl_parameters_regenerate: 29 disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable: /usr/local/libexec/dovecot/pop3-login mail_location: maildir:/var/vmail/%d/%n mail_executable: /usr/local/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/lib/dovecot/pop3 auth default: user: authdove debug: yes passdb: driver: passwd-file args: /usr/local/etc/%d/passwd userdb: driver: static args: uid=2000 gid=2000 home=/var/vmail/%d/%n

2 1

[Dovecot] Sieve libexec /usr/lib/dovecot/deliver
by Filip Dvořák 17 Feb '10

17 Feb '10

Hi, I have installed dovecot(1.2.10) with --libexecdir=/usr/lib . Dovecot sieve(0.1.15) is compiled with --with-dovecot but still uses /usr/libexec/dovecot/deliver instead of /usr/lib/dovecot/deliver. How should be dovecot sieve configured to use /usr/lib/dovecot/deliver thanks in advance Filip # dovecot configuration: ./configure --prefix=/usr --sysconfdir=/etc/dovecot --localstatedir=/var \ --libexecdir=/usr/lib --with-moduledir=/usr/lib/dovecot/modules \ --with-db --with-mysql --with-pgsql --with-sqlite \ --with-ssl=openssl --with-ssldir=/etc/dovecot/ssl \ --with-gssapi --with-ldap=plugin --enable-header-install --with-docs # dovecot sieve configuration: ./configure --prefix=/usr --with-dovecot=/usr/lib/dovecot # /usr/lib/dovecot/dovecot-config: CFLAGS="-std=gnu99 -march=i686 -mtune=generic -O2 -pipe -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 " LIBS=" -lrt" SSL_LIBS="-lssl -lcrypto -ldl -lz " STORAGE_LIBS="$(top_builddir)/src/lib-storage/register/libstorage-register.a $(top_builddir)/src/lib-storage/list/libstorage_list.a $(top_builddir)/src/lib-storage/index/cydir/libstorage_cydir.a $(top_builddir)/src/lib-storage/index/dbox/libstorage_dbox.a $(top_builddir)/src/lib-storage/index/maildir/libstorage_maildir.a $(top_builddir)/src/lib-storage/index/mbox/libstorage_mbox.a $(top_builddir)/src/lib-storage/index/raw/libstorage_raw.a $(top_builddir)/src/lib-storage/index/shared/libstorage_shared.a $(top_builddir)/src/lib-storage/index/libstorage_index.a $(top_builddir)/src/lib-storage/libstorage.a $(top_builddir)/src/lib-index/libindex.a $(top_builddir)/src/lib-imap/libimap.a $(top_builddir)/src/lib-mail/libmail.a $(top_builddir)/src/lib-auth/libauth.a $(top_builddir)/src/lib-charset/libcharset.a $(top_builddir)/src/lib/liblib.a" LIBICONV="" MODULE_LIBS="-export-dynamic -ldl" dovecot_incdir=/usr/include/dovecot moduledir=/usr/lib/dovecot/modules CFLAGS="-std=gnu99 -march=i686 -mtune=generic -O2 -pipe -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscri LIBS=" -lrt" SSL_LIBS="-lssl -lcrypto -ldl -lz " STORAGE_LIBS="$(top_builddir)/src/lib-storage/register/libstorage-register.a $(top_builddir)/src/lib-storage/list/libstorage_list.a $(top_ LIBICONV="" MODULE_LIBS="-export-dynamic -ldl" dovecot_incdir=/usr/include/dovecot moduledir=/usr/lib/dovecot/modules # end of dovecot-config dovecot -n output: # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.27-lts i686 ext3 protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/mail.pruda.com/cert.pem ssl_key_file: /etc/ssl/mail.pruda.com/key.pem disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_location: maildir:/home/vmail/%u mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: postmaster_address: postmaster(a)pruda.com mail_plugins: sieve sieve_global_path: /home/vmail/dovecot-global.sieve sendmail_path: /usr/sbin/sendmail auth default: user: nobody passdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail plugin: sieve: /home/vmail/%u/dovecot.sieve home: /home/vmail/%u

1 1

[Dovecot] Special user
by Daniel L. Miller 17 Feb '10

17 Feb '10

Not sure what to call this - I'm actually working out the details as I type this. I want to have a valid username/password for an account for sending purposes - but when receiving this is an alias that broadcasts to several users. Example: accountspayable(a)mydomain.com - is an alias for jane(a)mydomain.com, june(a)mydomain.com, and john(a)mydomain.com. However - any mails sent (from a particular client software) should all only show "accountspayable" as the sender. How would I implement this? I'm asking here because Dovecot serves as the authentication mechanism for my SMTP server (Postfix) via LDAP lookups. -- Daniel

4 4