- dovecot - dovecot.org

[Dovecot] Forcibly emptying a POP3 mailbox
by Răzvan Sandu 05 Feb '10

05 Feb '10

Hello, I've recently saw a discussion on this list, about a standardised way of emptying POP3 mailboxes on the server - but no solution came up. Please provide a suggestion for the following situation: - I am running a stock POP3 dovecot server, on Fedora 12 (dovecot version 1.2.9) - passwd-file authentication via /etc/imap.passwd - users are virtual, sharing the same UID/GID; - storage is in MailDir system; - for remote users, server is POP3-only, since the administrative policy says that every user should download his messages on the local workstation, then delete them from server immediately after succesful download. - IMAP is allowed only locally, in order to be used together via stock squirrelmail Web interface (for emergencies only) However, there are users that check the infamous „Leave a copy on the server” checkbox (or equivalent) in their mail clients, eventually adding „Delete messages after X days”. Since I have no direct administrative control on the clients, I absolutely need a way to forbid the above behaviour at server level, in order to enforce the policy. The server's HDD is meant to store received messages from reception to the first access only. Filesystem quotas are not an option in this scenario, since the UID/GID is the same for all virtual users. What I need is way to make sure that "cur" and "tmp" subdirectories are perfectly empty after the user downloads his mail. (I will also need a way to make sure that users using squirrelmail leave no populated "Sent" and "Trash" folders on server's HDD, but that's offtopic here). Could you please suggest a way to solve this ? Thanks a lot, Răzvan

5 5

Re: [Dovecot] Forcibly emptying a POP3 mailbox
by Răzvan Sandu 05 Feb '10

05 Feb '10

Hello, Thanks a lot, but the problem here are not the IMAP users accessing the server via squirrelmail. Few people use this. What I mainly want to avoid are *POP3* users checking the „Leave a copy on the server” checkmark. I need a way of automatically performing the DELE command at server level, just after a POP3 user *succesfully* downloaded his messages via POP3... Thanks again, Răzvan

5 4

[Dovecot] postfix and dovecot on different systems - sasl request
by thomas polnik 05 Feb '10

05 Feb '10

Hello, until now I have use postfix and dovecot on the same server. Now I want/must split this both systems (server1 - postfix, server2 - dovecot). I used dovecot auth system for postfix ## snip ## smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth ## snap ## but this does not work, if dovecot is not running on the same server. I did not find any information in postfix/dovecot documentation, how I could solve this problem smart. My only idea, but it looks like quick and dirty solution: On the postfix system a small dovecot systems runs only for postfix sasl via /var/spool/postfix/private/auth. (Or I use saslauthd with sql or imap) The postfix system (on server 1) delivers mails via transport map to the dovecot system. On the dovecot system postfix delivers this mails i.e. via ## snip ## dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient} ## snip ## to the mail boxes. Are there other ways, how I could solve this problem? My wish configuration: postfix sends the auth request via tcp/ip to the dovecot auth system and not via a socket. I use postfix 2.6 and dovecot 1.2.6. Best regards, thomas polnik.

2 1

[Dovecot] dovecot-auth stops responding
by Jonathan Siegle 05 Feb '10

05 Feb '10

Running dovecot 1.2.4(imap only) on AIX out of inetd. I accept passwords(PAM for auth) and kerberos tickets. Occasionally we see dovecot-auth stop responding. I just kill it off and another process is spawned which works fine. It doesn't look like it is hitting any ulimits(11MB for memory). I issued a kill -11 and ran it through the debugger. Here is what it says: dbx dovecot-auth core Type 'help' for help. [using memory image in core] reading symbolic information ... Segmentation fault in __fd_poll at 0x900000000117634 ($t1) 0x900000000117634 (__fd_poll+0x98) e8410028 ld r2,0x28(r1) (dbx) where __fd_poll(??, ??, ??) at 0x900000000117634 ioloop-poll.poll(__listptr = 0x00000001104dd330, __nfds = 145, __timeout = 1051), line 121 in "poll.h" io_loop_handler_run(ioloop = 0x000000011001bfb0), line 157 in "ioloop- poll.c" io_loop_run(ioloop = 0x000000011001bfb0), line 335 in "ioloop.c" main(argc = 1, argv = 0x0ffffffffffffad8), line 347 in "main.c" Here are my ulimits: ulimit -a time(seconds) unlimited file(blocks) 2097151 data(kbytes) 1048576 stack(kbytes) 65536 memory(kbytes) 65536 coredump(blocks) 2097151 nofiles(descriptors) 32768 Any help would be appreciated. Thanks, Jonathan

3 12

[Dovecot] Fatal: chdir( ) failed: Permission denied
by Vallo Kallaste 05 Feb '10

05 Feb '10

Hi Dovecot fails to chdir() into users home directory giving the following error: Oct 9 16:43:49 jura dovecot: dovecot: Fatal: chdir(/a/home/mina) failed: Permission denied (euid=1118 0(mina) egid=11332(devel) missing +x perm: /a/home) Oct 9 16:43:49 jura dovecot: dovecot: child 14441 (imap) returned error 89 (Fatal failure) The reason seems to be that user primary group is "devel" and directory /a/home has ACL which gives execute permission only to the users in "domain users" group. Now the catch is that the user _is_ member of "domain users" group and is happily accessing his home directory over CIFS(Samba) for long time. Also, the user has no problem entering his home directory when using shell access. It just seems like the user lost membership of a bunch of supplementary groups. The group membership info is coming from M$ PDC via winbind and NSS. We have few users and can change the users primary group and/or relax the /a/home directory ACL, but overall this is not right. Shall I shut up or can we hope for a fix or at least explanation? Thanks jura:/a # ls -la drwxrws--T+ 3 root domain admins 18 Oct 8 15:10 home jura:/a # getfacl home/ # file: home # owner: root # group: domain\040admins user::rwx group::rwx group:domain\040users:--x mask::rwx other::--- -- Vallo

4 8

[Dovecot] Question re: storing non mail files via IMAP
by Charles Marcus 05 Feb '10

05 Feb '10

Hey Timo, I have a question regarding how dovecot might behave if a mail client (like, for example, Thunderbird) decided to store some of its config files on the IMAP server itself. Would there be a decent way of doing this with dovecot that wouldn't cause problems for other clients that didn't know about these files? Maybe there's a way to define a special folder that dovecot knows about at the top level of each users mail location that can be used for this kind of thing? All I'm thinking of are certain config related files, so they would be small, and would only be downloaded when they didn't already exist - ie, when someone adds their existing account to a new PC, the first time they logged in, TB could simply download all of the config files, restart itself, and voila, your pre-configured TB is ready to go...

5 6

[Dovecot] mailutil question re: translating mbox folders to maildir
by Stewart Dean 04 Feb '10

04 Feb '10

I need mailutil in order to use the mbox to maildir translation routines that are posted in the Dovecot wiki, but there is no mailutil with the AIX image... mailutil is apparently built as part of Pine, and indeed I can see it in the build tree from my V4.6.1 Pine build, which I still have....OTOH, my version of Pine is not patched for maildir. Will the native pine mailutil work with mb2md or does it have be a mailutil built in a patched Pine :) tree? Oh Tannebaum, oh Tannebaum........ -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 0

[Dovecot] dovecot and AFS
by Per-Erik Persson 04 Feb '10

04 Feb '10

Scrolling thru the archives gives me a hint that there might be troubles with AFS together with dovecot and maildir especially the LDA Is this still an issue or should I prepare for spending time to solve it? If someone successfully got it to work in a small or large scale environment I would be happy to know about it. /Per-Erik Persson

3 6

[Dovecot] LMTP-Server: missing headers
by Andreas Schulze 04 Feb '10

04 Feb '10

Hello, I just installed dovecot2-beta2 and configured the lmtp-server + postfix (no virtual users) postfix: mail_version = 2.7-20100117 mailbox_transport = lmtp:unix:lmtp-server lmtp_assume_final = yes dovecot: service lmtp { executable = lmtp protocol = lmtp unix_listener /var/spool/postfix/lmtp-server { group = postfix mode = 0660 user = postfix } } Mail gets delivered to ~user/Maildir/ Feb 1 06:57:39 testhost dovecot: lmtp(8238): Connect from local Feb 1 06:57:39 testhost postfix/lmtp[8237]: 07108A3608: to=<sca(a)testhost.example.org>, orig_to=<root>, relay=testhost.example.org[lmtp-server], delay=0.67, delays=0.22/0.03/0.22/0.2, dsn=2.0.0, status=sent (250 2.0.0 <sca(a)testhost.example.org> lwjfEVNtZksuIAAA4eG3hw Saved) Feb 1 06:57:39 testhost dovecot: lmtp(8238, sca(a)testhost.example.org) lwjfEVNtZksuIAAA4eG3hw: msgid=<20100201055739.07108A3608(a)testhost.example.org>: saved mail to INBOX Second try: postfix using deliver postfix: mailbox_command = /usr/lib/dovecot/deliver log: Feb 1 07:21:08 testhost dovecot: lda(sca): msgid=<20100201062108.0D6D6A3608(a)testhost.example.org>: saved mail to INBOX Feb 1 07:21:08 testhost postfix/local[10039]: 0D6D6A3608: to=<sca(a)testhost.example.org>, orig_to=<sca>, relay=local, delay=0.13, delays=0.04/0.01/0/0.08, dsn=2.0.0, status=sent (delivered to command: /usr/lib/dovecot/deliver) In the first case there are *no* Return-Path and Delivered-To Headers. In the (most common) second case the *are* present. Why these Headers are not included while using the LMTP-Server? -- Andreas Schulze Internetdienste | P532 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

11 13

Re: [Dovecot] Forcibly emptying a POP3 mailbox
by Răzvan Sandu 04 Feb '10

04 Feb '10

Steffen Kaiser wrote: > Well, I know that the client knows it has *successfully* downloaded > messages, but how does the server know? Just to sent down some > packets through the wire does not mean success. Thanks, I see... so the server knows nothing about the success or insuccess of retrieving messages. Only client knows, so only client may act. In that case, the only possibility is to have some automatic script that periodically "cleans" the "cur" subdirectories, as you suggested. However, not being a programmer at all, I'm far from being able to write an industrial-grade solution for this. ;-) Best regards, Răzvan

1 0

[Dovecot] Create New Plugin
by Alex Baule 04 Feb '10

04 Feb '10

i have a Little question.... I dont know to much the autoconf/automake...there is a command or something to do, to include my plugin in the Makefile for dovecot compile them when i compile the hole package ?? or i shoud go to the configure and makefile.am and put by hand ? I put my plugin in the plugins directory source tree.

2 4

Re: [Dovecot] [RFE] A way to encode passwords in the /etc/imap.passwd file
by Răzvan Sandu 04 Feb '10

04 Feb '10

@Pascal Volk Thanks for the algorithm you've provided ! Unfortuantely, I'm not a programmer myself and I don't feel confident to code such an utility (even if I perfectly understand your pseudocode). ;-) What I'm looking for is not even a hand-made script, but a production solution included in the stock dovecot RPM package itself - i.e a new, better form of the dovecotpw utility. Best regards, Răzvan

1 0

[Dovecot] Execute mailfilter after message move
by Kārlis Repsons 04 Feb '10

04 Feb '10

Hi, came here to ask, if there are any ideas about a possible Dovecot feature, which would allow execution of a specific mailfilter or other program after new message is *moved* in specified mail location? The practical benefit on my side would be, that there wouldn't be any need to do getmail cronjobs, which unnecessarily fill up logfiles... (primarily for easy spam learning and reporting)

2 1

[Dovecot] [dovecot] Problem with namespaces and dovecot -n
by Jonathan Siegle 03 Feb '10

03 Feb '10

I'm running dovecot 2.0 revision 10622:de9d6dae7fe5 on AIX. I'm trying to see both namespaces that I have listed in mail.conf. namespace private { separator = / prefix = inbox = no hidden = no location = maildir:%h/Maildir list = yes } namespace private { separator = / prefix = "#mbox/" location = mbox:%h:INBOX=/var/mail/%u inbox = yes hidden = no list = yes # for v1.1+ } Whichever namespace is last, I can see when running dovecot -n. Am I supposed to only see the last one printed? # 2.0.beta2: /usr/local/dovecot2.0beta2/etc/dovecot/dovecot.conf # OS: AIX 3 0001112AD300 auth_debug = yes auth_gssapi_hostname = $ALL auth_krb5_keytab = /etc/krb5/dovecot.keytab auth_mechanisms = plain gssapi disable_plaintext_auth = no listen = * login_greeting = Dovecot version 2 on tr27n12 ready. mail_full_filesystem_access = yes mail_location = mbox:%h:INBOX=/var/spool/mail/%Ju/%u mbox_lazy_writes = no mbox_write_locks = fcntl mmap_disable = yes namespace { hidden = no inbox = yes list = yes location = mbox:%h:INBOX=/var/mail/%u prefix = #mbox/ separator = / name = private } passdb { deny = no driver = pam master = no pass = no } With this config I have no folders. If I flip the namespaces in the config, I have no INBOX and can't login. Thanks, Jonathan

2 1

[Dovecot] [RFE] A way to encode passwords in the /etc/imap.passwd file
by Răzvan Sandu 03 Feb '10

03 Feb '10

Hello, Is this the proper place to suggest an enhancement for the stock dovecot package ? The enhancement would be the following: For the time being, the dovecotpw utility offers a standardised way to interactively encode a user password in a certain scheme, say: dovecotpw -s CRYPT Enter new passord: Re-enter new password: etc. Given a *valid* /etc/imap.passwd file (passwd-file authentication), dovecotpw should be able to process it non-interactively and output another text file with all {PLAIN} passwords converted in the specified <scheme>, i.e.: dovecotpwd -s CRYPT if=/etc/imap.passwd of=/etc/imap.passwd.converted where /etc/imap.passwd.converted have the previously {PLAIN} passwords converted in scheme CRYPT. Passwords that were previously encrypted in other schemes than {PLAIN} shoud remain untouched. That will allow quick securing of old legacy /etc/imap.passwd files. Thanks a lot, Răzvan

2 1

[Dovecot] [BUG] problem with zlib plugin
by spam＠abma.de 03 Feb '10

03 Feb '10

Hi, i think i've the same problem as described here: http://www.dovecot.org/list/dovecot/2009-June/040687.html when opening a folder without an index (?) and bzip-compressed files i get following error message: 2010-02-03T14:12:10.026452+01:00 server dovecot: IMAP(user): gzread() failed: PARAM_ERROR 2010-02-03T14:12:10.026477+01:00 server dovecot: IMAP(user): FETCH for mailbox folder UID 105 failed to read message input: Invalid argument Matthias -- dovecot -n # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-vserver-amd64 x86_64 Ubuntu 9.04 listen: *:143 ssl_listen: *:993 ssl_cert_file: /etc/ssl/ssl.crt ssl_key_file: /etc/ssl/ssl.key shutdown_clients: no login_dir: /usr/var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login mail_uid: 97 mail_gid: 97 mail_location: maildir:~/.maildir mail_debug: yes mail_plugins: quota imap_quota zlib lda: postmaster_address: postmaster(a)example.com auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: mail group: mail master: path: /var/run/dovecot/auth-master mode: 384 user: mail group: mail plugin: quota: maildir:User quota quota_rule: *:storage=100M

2 2

[Dovecot] deny=yes in userdb
by Edgar Fuß 03 Feb '10

03 Feb '10

I would like deliver to reject certain users. Since supposedly deliver only uses userdb, not passwd, I can't use deny=yes for that. Or does userdb support deny=yes? Yes, I should rather reject them right in the MTA, but that currently takes too long to implement. Or how to reject gast* in postfix using nss authentication?

3 3

[Dovecot] Restore of individual mail files
by CoolAtt NNA 03 Feb '10

03 Feb '10

Hi. In order for restoration to work fine, I have to create a folder using the interface (e.g RounCube) which also creates the required structures. Then I copied the emailfile e.g xyz:s to /myrestoredemail/cur/ How do i properly create a folder with its structures(index,etc) without using the RoundCube web inteface ? Thanks CoolAtt _________________________________________________________________ Hotmail: Trusted email with powerful SPAM protection. https://signup.live.com/signup.aspx?id=60969

2 3

[Dovecot] disabling mail delivery for a user
by Frank Cusack 02 Feb '10

02 Feb '10

How can I disable mail delivery for a user yet still allow access to their mailbox from another account which their mail is shared to? If I put them in a userdb which has "deny = yes" that just disables their ability to login, yes? And they would still have mail delivered. I want to disable their ability to login AND bounce all mail delivered to them, preferably solely through dovecot configuration. I am using lda, obviously, for mail delivery. (I could configure the MTA to reject mail for them if there is no other option.)

4 13

[Dovecot] v2.0.beta2 released
by Timo Sirainen 02 Feb '10

02 Feb '10

http://dovecot.org/releases/2.0/beta/dovecot-2.0.beta2.tar.gz http://dovecot.org/releases/2.0/beta/dovecot-2.0.beta2.tar.gz.sig I tried to keep the configuration and APIs compatible with v2.0.beta1, but unfortunately there were a few things that really had to be changed: 1. passdbs and userdbs have now a separate "driver" setting inside them. So for example if you had: userdb passwd { } You'll now need to use instead: userdb { driver = passwd } 2. Services now have default inet_listeners. You need to either remove your existing ones, or override the defaults by giving the listeners's name like shown in the new example master.conf. For example if you had: service imap-login { inet_listener { port = 1234 .. change it to: service imap-login { inet_listener imap { port = 1234 If you want to disable a default listener, you can set its port to 0. Some new features: - Added auth_verbose_passwords = no|plain|sha1. If authentication fails, this setting logs the used password. If you don't really need to know what the password itself was, but are more interested in knowing if the user is simply trying to use the wrong password every single time or if it's a brute force attack, you can set this to "sha1" and only the SHA1 of the password is logged. That's enough to know if the password is same or different between login attempts. - lazy-expunge: Support a single-namespace configuration. In this setup if mailbox has some expunged messages and then the whole mailbox gets deleted, they get merged into the same deleted mailbox. - protocol !imap { .. } adds configuration to all protocols except imap. - imap/pop3 proxying supports now async DNS lookups for hosts. There's a separate dns-client service doing the lookups using OS's own blocking resolver. - dovecot-config file changed in a way that it'll be easier to create external software linking against dovecot libraries. This made Pigeonhole's configure script a lot simpler. And of course there have been lots of fixes.

3 4

[Dovecot] proxy_maybe regex
by David Halik 02 Feb '10

02 Feb '10

Does anyone know if dovecot support regex lookups for proxy/proxy_maybe, rather than mysql/ldap etc? I've been comparing it with perdition to see which one might be better for us to do layer7 username switching. Perdition supports the ability to not have any auth/db looks, but rather just a regex file that parses the usernames as they come in and forwards to the particular machine on the same port. For example: username:host ^[a-d]: 192.168.xxx.1 ^[e-k]: 192.168.xxx.2 and so on... I didn't think this was supported in dovecot, but I wanted to check first. I think this is going to end up being what we use to avoid NFS problems. It's lightweight, drops into our current setup, and doesn't require a mysql database which adds another point of failure. -- ================================ David Halik System Administrator OIT-CSS Rutgers University dhalik(a)jla.rutgers.edu ================================

3 6

[Dovecot] Want to have some users with Maildir, some with mbox
by Stewart Dean 02 Feb '10

02 Feb '10

Want to have some users with Maildir, some with mbox, as I migrate from mbox format to maildir over the space of a month. After everyone is converted to maildir, I'll change the mail_location in dovecot.conf. During the interim, can I use the Custom mailbox location script (at the bottom of the Mail Location DC Wiki page)? > if [ -d $HOME/.maildir ]; then > export MAIL=maildir:$HOME/.maildir > else > export MAIL=mbox:$HOME/mail:INBOX=/var/mail/$USER > fi > Questions: 1) What does explicitly specifying MAIL this way override? The dovecot.conf mail_location variable? 2) My mail_location var is defined as: mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u:INDEX=/var/dcindx/%u and my prospective maildir INBOX and mail folder root is to be ~/Maildir. So would I change the above to: > if [ -d $HOME/Maildir ]; then > export MAIL=maildir:$HOME/Maildir:INDEX=/var/dcindx/$USER > else > export MAIL=mbox:$HOME/mail:INBOX=/var/spool/mail/$USER: > INDEX=/var/dcindx/$USER > fi Question 3: When converting existing users from mbox to maildir, should I delete the index contents? Thanks in advance! dovecot -n output # 1.2.8: /usr/local/etc/dovecot.conf # OS: AIX 3 0001378F4C00 listen: *:143 ssl_listen: *:993 disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_processes_count: 12 login_max_processes_count: 774 max_mail_processes: 1280 mail_max_userip_connections: 12 verbose_proctitle: yes first_valid_uid: 200 mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u:INDEX=/var/dcindx/%u mbox_write_locks: fcntl mbox_dirty_syncs: no lda: postmaster_address: postmaster(a)example.com auth default: passdb: driver: pam userdb: driver: passwd -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

3 9

[Dovecot] index location
by Dave Brenner 01 Feb '10

01 Feb '10

Greetings. We are testing with 1.2.9 and have found that with mail_full_filesystem_access set to 'yes', we cannot force indexes for folders under ~/mail to be stored in /var/dovecot/indexes/%u. /var/dovecot/indexes/%u/.imap/INBOX/dovecot.index* is created just fine, but everything else ends up in ~mail/.imap. If I change mail_full_filesystem_access to 'no', then all indexes are created in the expected location: $ ls -la /var/dovecot/indexes/blitz/ total 4 drwxr-xr-x 4 blitz popuser 512 Jan 25 11:46 . drwxrwxr-x 5 root popuser 512 Jan 22 16:16 .. drwxr-xr-x 3 blitz popuser 512 Jan 22 16:16 .imap drwxr-xr-x 3 blitz popuser 512 Jan 25 11:46 mail (I probably need to set the sticky bit for this, but for testing this is OK) We are setting the index location from /etc/passwd-dove: blitz:x:14267:500::/usr/users/dialups/blitz::userdb_mail=mbox:~/:INBOX=/var/mail/%u:INDEX=/var/dovecot/indexes/%u Is there a way to get this to function the way we'd like, with all indexes stored in /var/dovecot/indexes/u% ? My apologies if I missed an explanation about this in the list archive. Dave

2 9

[Dovecot] Extraneous information
by Michael M. Slusarz 01 Feb '10

01 Feb '10

Not technically a bug, but a small waste of bandwidth: it seems (at least as of 1.2.10) that if neither CONDSTORE/QRESYNC are enabled dovecot still sends HIGHESTMODSEQ info: a examine Testing.AAA * FLAGS (\Answered \Flagged \Deleted \Seen \Draft $Forwarded impflag0 impflag1 impflag2) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 309 EXISTS * 0 RECENT * OK [UNSEEN 5] First unseen. * OK [UIDVALIDITY 1225053009] UIDs valid * OK [UIDNEXT 387] Predicted next UID * OK [HIGHESTMODSEQ 136] Highest a OK [READ-ONLY] Select completed. I'm guessing this would only happen if using a client that supports QRESYNC (like IMP) and then switching later to a client that doesn't support.

2 2

[Dovecot] [dovecot] Problems installing managesieve and then managesieve-login
by Jonathan Siegle 01 Feb '10

01 Feb '10

Hi, Software: AIX 5.3 dovecot-2.0-pigeonhole revision 1234:7b3db97399de with dovecot revision 10621:a978089d090b I'm having problems installing managesieve. I modified the Makefile because DESTDIR was not being found. Here is what I changed to make it work: echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(dovecot_pkglibexecPROGRAMS_INSTALL) '$$p' '/usr/local/dovecot2.0beta2/bin$(dovecot_pkglibexecdir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(dovecot_pkglibexecPROGRAMS_INSTALL) "$$p" "/usr/local/dovecot2.0beta2/bin$(dovecot_pkglibexecdir)/$$f" || exit 1; \ --- Here is ORIGINAL: echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(dovecot_pkglibexecPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(dovecot_pkglibexecdir)/$$f'"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(dovecot_pkglibexecPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(dovecot_pkglibexecdir)/$$f" || exit 1; \ Here is the error: test -z "" || /usr/local/src/imapservers/dovecothg/dovecot-2.0-pigeonhole/install-sh -d "" /bin/sh ../../libtool --mode=install /usr/ladmin/bin/install -c 'managesieve' '/managesieve' libtool: install: `' must be an absolute directory name Try `libtool --help --mode=install' for more information. gmake[3]: *** [install-dovecot_pkglibexecPROGRAMS] Error 1 managesieve-login is having the same problem. sieve-tools installed just fine. On my configure line I have: $ ./configure --with-dovecot=../dovecot-2.0 --prefix=/usr/local/dovecot2.0beta2 --with-managesieve=yes Thanks, Jonathan

2 2