- dovecot - dovecot.org

Re: [Dovecot] Sieve plugin: Filtering UTF-8 Emails
by micha＠pocomail.de 23 Nov '09

23 Nov '09

Am Montag, den 23.11.2009 0:53:15 schrieb Pascal Volk <user+dovecot(a)localhost.localdomain.org>... > Please stop top posting. > > Your installation is horrible old. You may consider an update. > > You are using the omparator "i;ascii-casemap". Please read in RFC 2244 > section 3.4 about it <http://tools.ietf.org/html/rfc2244#section-3.4>. > And you will know, why your rule never will match. > You could test my working script from my last message. > > > Regards, > Pascal okay, thank you !!!!!!! michael

1 0

Re: [Dovecot] Sieve plugin: Filtering UTF-8 Emails
by micha＠pocomail.de 23 Nov '09

23 Nov '09

hi Pascal, sorry, here are my infos: dovecot version: Dovecot v1.0.rc15 i am not sure how to find out, which version of cumsieve the server has, as far as i can see with a locate cumsieve, it must be version 1.0.3 or 1.1.6. the scripte and a test-email is attached. the log says: deliver(shop(a)xxxx.de): "2009-11-23 00:09:45 "Info: msgid=<4B09C4AE.3070306(a)xxxx.de>: saved mail to INBOX thanks for your help!! michael Am Sonntag, den 22.11.2009 23:01:35 schrieb Pascal Volk <user+dovecot(a)localhost.localdomain.org>... > On 11/22/2009 09:33 PM micha(a)pocomail.de wrote: > >> hi all, >> >> i hope it´s okay for questions about the sieve plugin here... >> > > Yes, this is the right mailing list for such questions… > > >> my problem is, that the filters do not seem to match utf8-content >> >> for instance: the email: >> >> Content-Type: text/plain; charset="utf-8" >> Content-Transfer-Encoding: quoted-printable >> Subject: >> =?utf-8?Q?Erinnerung:=20Bitte=20f=C3=BChren=20Sie=20die=20Kaufabwicklung=20durch?= >> >> when i use the same subject (of course in utf-8) in my ".dovecot.sieve", >> the filter never matches ;-(( >> >> does anyone have an idea howto make the sample here matching by sieve ??? >> > > Huh, where is your script? No script - no error checking. ;) > > Which Dovecot version? Which Sieve version? > > # file .dovecot.sieve > .dovecot.sieve: UTF-8 Unicode text > > ~/.dovecot.sieve: > require "fileinto"; > if header :matches "subject" "Erinnerung: Bitte führen Sie die Kaufabw*" { > fileinto "Trash"; > setflag "\\Seen"; > } > > Log: Info: sieve: msgid=<20091…ple.com>: stored mail into mailbox Trash' > The test message is attached. > > > Regards, > Pascal > > > ------------------------------------------------------------------------ > > Betreff: > Erinnerung: Bitte führen Sie die Kaufabwicklung durch > Von: > spambot(a)example.com > Datum: > Sun, 22 Nov 2009 22:50:29 +0100 (CET) > An: > sven(a)firma.tld > > An: > sven(a)firma.tld > > > <html> > <body> > <h1>Hello wordl</h1> > <p>foo bar baz</p> > </body> > </html> > # Erinnerung Kaufabwicklung if allof ( header :comparator "i;ascii-casemap" :contains "Subject" "Erinnerung: Bitte führen Sie die Kaufabwicklung durch", ) { redirect "xxx(a)googlemail.com"; stop; }

2 1

[Dovecot] Sieve plugin: Filtering UTF-8 Emails
by micha＠pocomail.de 23 Nov '09

23 Nov '09

hi all, i hope it´s okay for questions about the sieve plugin here... my problem is, that the filters do not seem to match utf8-content for instance: the email: Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Subject: =?utf-8?Q?Erinnerung:=20Bitte=20f=C3=BChren=20Sie=20die=20Kaufabwicklung=20durch?= when i use the same subject (of course in utf-8) in my ".dovecot.sieve", the filter never matches ;-(( does anyone have an idea howto make the sample here matching by sieve ??? thank´s for any help! michael

2 1

[Dovecot] quota dict
by Lampa 22 Nov '09

22 Nov '09

Hello, i'm using dict quota stored in mysql (/etc/dovecot/dovecot-dict-quota.conf): connect = host=localhost dbname=vmail user=dovecot password= # CREATE TABLE quota ( # username varchar(100) not null, # bytes bigint not null default 0, # messages integer not null default 0, # primary key (username) # ); map { pattern = priv/quota/storage table = quota username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota username_field = username value_field = messages } ----------------------- from dovecot.conf (quota rule is get from passdb sql + prefetch): dict { quotadict = mysql:/etc/dovecot/dovecot-dict-quota.conf } plugin { quota = dict:user::proxy::quotadict quota_warning = storage=99%% /etc/dovecot/quota-warning.sh 99 quota_warning2 = storage=95%% /etc/dovecot/quota-warning.sh 95 quota_warning3 = storage=80%% /etc/dovecot/quota-warning.sh 80 But how to add another quota for Trash folder ? It seeems that will be needed another table something like quota2 but how to map it using map {} -- Lampa

2 4

[Dovecot] kudos
by Frank Cusack 21 Nov '09

21 Nov '09

I'm sure this isn't said enough, so kudos to Timo for what has to be the best IMAP server anywhere, hands-down no qualifications! And to think, it's a one man operation ... although perhaps that is one of the reasons it is so good.

2 1

[Dovecot] Problem compiling dovecot 1.2.8 on Solaris 10?
by Drew Schatt 21 Nov '09

21 Nov '09

I've got an issue using Sun's compilers on Solaris 10 - it appears that dovecot is trying to use the getopt function, that's part of GNU's glibc, and, therefore, not present when using Sun's compilers. Any ideas on how to resolve? cc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-auth -I../../src/lib-mail -I../../src/lib-imap -I../../src/lib-index -I../../src/lib-storage/index/maildir -I../../src/auth -DPKG_RUNDIR=\""/usr/local/var/run/dovecot"\" -I/usr/local/include -I/usr/local/ssl/include -D_XPG6 -L/usr/local/lib -L/usr/local/ssl/lib -KPIC -lm -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -xc99 -I/usr/local/include -I/usr/local/ssl/include -L/usr/local/lib -L/usr/local/ssl/lib -D_XPG6 -xstrconst -KPIC -lm -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -c authtest.c "authtest.c", line 164: warning: implicit function declaration: getopt "authtest.c", line 167: undefined symbol: optarg "authtest.c", line 167: warning: improper pointer/integer combination: op "=" "authtest.c", line 170: warning: improper pointer/integer combination: op "=" "authtest.c", line 176: undefined symbol: optind "authtest.c", line 178: undefined symbol: optind cc: acomp failed for authtest.c -Drew Schatt

3 3

[Dovecot] Plugin Compatibility
by Tony Rutherford 20 Nov '09

20 Nov '09

We are looking to develop a plugin against the 1.2.X line (8 as of right now). Seeing that v2.0 is not too far off, is there any reason to think that a plugin developed for 1.2.X would NOT be compatible with the 2.0 line?Thanks,Tony This message is intended solely for the individual(s) to whom it is addressed. If you are not the intended recipient, any dissemination or copying is strictly prohibited. If you believe you received this message in error, please notify the sender and delete from your system. Thank you.

2 1

[Dovecot] quota is not ignoring trash
by JC 20 Nov '09

20 Nov '09

I have debian lenny configured with postfix 2.5.5 and dovecot 1.0.15 with mysql, every user has a different quota. The problem is that the quota is not ignoring trash folder, how can I solve this problem? And another question, is there a possibility to ignore sent folder?. this is my dovecot.conf smtp:# dovecot -n # 1.0.15: /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/mail.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: pop3 imap disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_processes_count: 5 login_max_processes_count: 256 login_max_connections: 512 max_mail_processes: 512 first_valid_uid: 5000 last_valid_uid: 5000 first_valid_gid: 5000 mail_access_groups: vmail mail_privileged_group: vmail mail_location: maildir:/home/vmail/%d/%n maildir_copy_with_hardlinks: yes maildir_copy_preserve_filename: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota trash mail_plugins(imap): quota imap_quota trash mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: . prefix: INBOX. inbox: yes auth default: mechanisms: plain login user: vmail passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: vmail master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: vmail plugin: quota: maildir:storage=51200:ignore=Trash trash: /etc/dovecot/dovecot-trash.conf this is my dovecot-sql.conf driver = mysql connect = host=127.0.0.1 dbname=maildb user=xxx password=yyy default_pass_scheme = CRYPT password_query = SELECT email AS user, password FROM users WHERE email = '%u' user_query = SELECT 'maildir:/home/vmail/%d/%n' AS home, 5000 AS uid, 5000 AS gid, CONCAT('maildir:storage=', ROUND( quota / 1000 ) ) AS quota FROM users WHERE email = '%u'

2 1

[Dovecot] Postfix+Dovecot SASL+LDAP(AD)
by Vitaliy Vladimirovich 20 Nov '09

20 Nov '09

I have tried configure Postfix with Dovecot SASL to authenticate remote users in LDAP (Active Directory). Below my dovecot.conf: protocols = none ssl = none auth default { mechanisms = plain login passdb ldap { args = /usr/local/etc/dovecot-ldap.conf } userdb ldap { args = /usr/local/etc/dovecot-ldap-userdb.conf } } dovecot-ldap.conf hosts = 10.55.0.2:389 debug_level = 1 auth_bind = yes auth_bind_userdn = cn=%n,dc=example,dc=gov,dc=ua ldap_version = 3 base = dc=example, dc=gov, dc=ua scope = subtree ## 10.55.0.2 - Domain Controller ## But it does not work:-( Where is mistake? Below log: Nov 18 13:02:59 mx postfix/smtpd[12985]: connect from unknown[190.10.190.3] Nov 18 13:02:59 mx postfix/smtpd[12985]: setting up TLS connection from unknown[190.10.190.3] Nov 18 13:02:59 mx postfix/smtpd[12985]: Anonymous TLS connection established from unknown[190.10.190.3]: TLSv1 with cipher RC4-MD5 (128/128 bits) Nov 18 13:02:59 mx dovecot: auth(default): ldap_bind Nov 18 13:02:59 mx dovecot: auth(default): ldap_simple_bind Nov 18 13:02:59 mx dovecot: auth(default): ldap_sasl_bind Nov 18 13:02:59 mx dovecot: auth(default): ldap_send_initial_request Nov 18 13:02:59 mx dovecot: auth(default): ldap_send_server_request Nov 18 13:02:59 mx dovecot: auth(default): ldap_result ld 0x11847020 msgid -1 Nov 18 13:02:59 mx dovecot: auth(default): wait4msg ld 0x11847020 msgid -1 (timeout 0 usec) Nov 18 13:02:59 mx dovecot: auth(default): wait4msg continue ld 0x11847020 msgid -1 all 1 Nov 18 13:02:59 mx dovecot: auth(default): ** ld 0x11847020 Connections: Nov 18 13:02:59 mx dovecot: auth(default): * host: 10.55.0.2 port: 389 (default) Nov 18 13:02:59 mx dovecot: auth(default): refcnt: 2 status: Connected Nov 18 13:02:59 mx dovecot: auth(default): last used: Wed Nov 18 13:02:59 2009 Nov 18 13:02:59 mx dovecot: auth(default): Nov 18 13:02:59 mx dovecot: auth(default): Nov 18 13:02:59 mx dovecot: auth(default): ** ld 0x11847020 Outstanding Requests: Nov 18 13:02:59 mx dovecot: auth(default): * msgid 3, origid 3, status InProgress Nov 18 13:02:59 mx dovecot: auth(default): outstanding referrals 0, parent count 0 Nov 18 13:02:59 mx dovecot: auth(default): ld 0x11847020 request count 1 (abandoned 0) Nov 18 13:02:59 mx dovecot: auth(default): ** ld 0x11847020 Response Queue: Nov 18 13:02:59 mx dovecot: auth(default): Empty Nov 18 13:02:59 mx dovecot: auth(default): ld 0x11847020 response count 0 Nov 18 13:02:59 mx dovecot: auth(default): ldap_chkResponseList ld 0x11847020 msgid -1 all 1 Nov 18 13:02:59 mx dovecot: auth(default): ldap_chkResponseList returns ld 0x11847020 NULL Nov 18 13:02:59 mx dovecot: auth(default): ldap_int_select Nov 18 13:02:59 mx dovecot: auth(default): read1msg: ld 0x11847020 msgid -1 all 1 Nov 18 13:02:59 mx dovecot: auth(default): read1msg: ld 0x11847020 msgid 3 message type bind Nov 18 13:02:59 mx dovecot: auth(default): ldap_chase_referrals Nov 18 13:02:59 mx dovecot: auth(default): read1msg: V2 referral chased, mark request completed, id = 3 Nov 18 13:02:59 mx dovecot: auth(default): read1msg: ld 0x11847020 0 new referrals Nov 18 13:02:59 mx dovecot: auth(default): read1msg: mark request completed, ld 0x11847020 msgid 3 Nov 18 13:02:59 mx dovecot: auth(default): request done: ld 0x11847020 msgid 3 Nov 18 13:02:59 mx dovecot: auth(default): res_errno: 49, res_error: <80090308: LdapErr: DSID-0C090334, comment: AcceptSecurityContext error, data 525, vece>, res_matched: <> Nov 18 13:02:59 mx dovecot: auth(default): ldap_free_request (origid 3, msgid 3) Nov 18 13:02:59 mx dovecot: auth(default): ldap_parse_result Nov 18 13:02:59 mx dovecot: auth(default): ldap_parse_result Nov 18 13:02:59 mx dovecot: auth(default): ldap(test_user(a)example.org.ua,190.10.190.3): invalid credentials Nov 18 13:02:59 mx dovecot: auth(default): ldap_msgfree Nov 18 13:02:59 mx dovecot: auth(default): ldap_result ld 0x11847020 msgid -1 Nov 18 13:02:59 mx dovecot: auth(default): wait4msg ld 0x11847020 msgid -1 (timeout 0 usec) Nov 18 13:02:59 mx dovecot: auth(default): wait4msg continue ld 0x11847020 msgid -1 all 1 Nov 18 13:02:59 mx dovecot: auth(default): ** ld 0x11847020 Connections: Nov 18 13:02:59 mx dovecot: auth(default): * host: 10.55.0.2 port: 389 (default) Nov 18 13:02:59 mx dovecot: auth(default): refcnt: 1 status: Connected Nov 18 13:02:59 mx dovecot: auth(default): last used: Wed Nov 18 13:02:59 2009 Nov 18 13:02:59 mx dovecot: auth(default): Nov 18 13:02:59 mx dovecot: auth(default): Nov 18 13:02:59 mx dovecot: auth(default): ** ld 0x11847020 Outstanding Requests: Nov 18 13:02:59 mx dovecot: auth(default): Empty Nov 18 13:02:59 mx dovecot: auth(default): ld 0x11847020 request count 0 (abandoned 0) Nov 18 13:02:59 mx dovecot: auth(default): ** ld 0x11847020 Response Queue: Nov 18 13:02:59 mx dovecot: auth(default): Empty Nov 18 13:02:59 mx dovecot: auth(default): ld 0x11847020 response count 0 Nov 18 13:02:59 mx dovecot: auth(default): ldap_chkResponseList ld 0x11847020 msgid -1 all 1 Nov 18 13:02:59 mx dovecot: auth(default): ldap_chkResponseList returns ld 0x11847020 NULL Nov 18 13:02:59 mx dovecot: auth(default): ldap_int_select Nov 18 13:03:01 mx postfix/smtpd[12985]: warning: unknown[190.10.190.3]: SASL LOGIN authentication failed: UGFzc3dvcmQ6 Nov 18 13:03:01 mx postfix/smtpd[12985]: lost connection after AUTH from unknown[190.10.190.3]

2 2

[Dovecot] bug when creating /var/run/dovecot?
by Frank Cusack 20 Nov '09

20 Nov '09

dovecot-1.2.7 If /var/run/dovecot does not exist when dovecot starts up (e.g. required when /var/run is a tmpfs/ramfs), it creates it. But it creates it with the wrong file mode -- the directory is mode 777. Being world writable means any user could change the name of any file within the directory, including the login directory, and then create their own new login directory. Or remove the pid file, or perhaps cause other types of havoc. Comments? -frank

2 1

[Dovecot] Errors in strace
by Jeffrey Nikoletich 20 Nov '09

20 Nov '09

I keep getting the following when I do a strace on login processes in dovecot. Are there any issues with these errors: gettimeofday({1258671134, 941478}, {420, 0}) = 0 accept(4, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434496, u64=534434496}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 70395}, {420, 0}) = 0 accept(4, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434688, u64=534434688}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 167400}, {420, 0}) = 0 accept(6, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434496, u64=534434496}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 388157}, {420, 0}) = 0 accept(4, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434496, u64=534434496}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 570056}, {420, 0}) = 0 accept(4, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434688, u64=534434688}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 572030}, {420, 0}) = 0 Jeffrey N.

2 1

[Dovecot] Sieve compilation error
by Oli Schacher 20 Nov '09

20 Nov '09

Hi list Trying to get sieve for 1.2 running (dovecot sieve, not cmusieve) I'm running on centos 5.4 64bit, dovecot rpms installed from http://atrpms.net/dist/el5/dovecot/ ( dovecot-1.2.7-0_102.el5.x86_64.rpm and dovecot-devel-1.2.7-0_102.el5.x86_64.rpm ) I pulled the sieve sources ( hg clone http://hg.rename-it.nl/dovecot-1.2-sieve ) autogen.sh ./configure --with-dovecot=/usr/include/dovecot/ so far so good but make fails: [...] make[4]: Leaving directory `/work/dovecot-1.2-sieve/src/sieve-tools/debug' make[4]: Entering directory `/work/dovecot-1.2-sieve/src/sieve-tools' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../src/lib-sieve -I../../src/lib-sieve-tool -I./debug -I/usr/include/dovecot -I/usr/include/dovecot/src/lib -I/usr/include/dovecot/src/lib-mail -I/usr/include/dovecot/src/lib-index -I/usr/include/dovecot/src/lib-storage -I/usr/include/dovecot/src/deliver -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/kerberos/include -MT sievec.o -MD -MP -MF ".deps/sievec.Tpo" -c -o sievec.o sievec.c; \ then mv -f ".deps/sievec.Tpo" ".deps/sievec.Po"; else rm -f ".deps/sievec.Tpo"; exit 1; fi make[4]: *** No rule to make target `/usr/include/dovecot/src/lib-storage/register/libstorage-register.a', needed by `sievec'. Stop. make[4]: Leaving directory `/work/dovecot-1.2-sieve/src/sieve-tools' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/work/dovecot-1.2-sieve/src/sieve-tools' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/work/dovecot-1.2-sieve/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/work/dovecot-1.2-sieve' make: *** [all] Error 2 Any hints? Thanks in advance Oli

3 3

Re: [Dovecot] Dovecot and SATA Backend - filesystems
by John Lyons 19 Nov '09

19 Nov '09

> The "generally don't see any bugs/issues" is the part I'm worried about > (generally isn't comforting). I was covering my **** on that one. Sods law dictates as soon as I say 'never' we'll discover an issue. > If you use a more traditional filesystem like ext2/ext3/ufs/etc then yes. > But you can use a cluster filesystem to get around this, and run > active-active. I've spent a week looking at the likes of PVFS, GFS, Lustre and a whole host of different systems, including pNFS (NFS 4.1) At the risk of diverting the thread away from the SATA backend, is there any recommendation for a fault tolerant file service. I'm really looking for 3 or 4 boxes to store data/metadata to support 10 Apache and Dovecot servers. The things I don't like are having a single metadata server be a single point of failure. Regards John

2 1

[Dovecot] Fwd: Re: Dovecot and SATA Backend
by Joseba Torre 19 Nov '09

19 Nov '09

I suppose this was for the list... -- Joseba Torre. Vicegerencia de TICs, área de Explotación

2 1

[Dovecot] configurable sieve_max_redirects
by Maciej Polewczyński 19 Nov '09

19 Nov '09

Witam Sieve implementation in dovecot 1.2 have hard-coded limit for max redirect: SIEVE_DEFAULT_MAX_REDIRECTS 4. I have to rise this to much higher value, e.g. 64. Is there possibility to do this another way than recompiling source? Maybe adding an option to dovecot.conf in plugin section will be a good idea. -- Pozdrowienia Maciej Polewczynski Registered Linux user #117725 OGICOM Sp. z o.o., 61-131 Poznan, ul. Baraniaka 88 REGON 634407251, NIP 781-17-20-476, KRS 0000140692 kapital zakladowy: 410 000 PLN

3 3

Re: [Dovecot] Combination of default domain and username character translation problem in POP3 server configuration
by Steffen Kaiser 19 Nov '09

19 Nov '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thu, 19 Nov 2009, Javier Vico Egea wrote: > In that case it works perfect but my problem are all the users using the old > vm-pop3 configuration with XXX!mysecondarydomain.es Yep, I just wanted confirmation :) There is currently no way to change this behaviour by configuration, but src/auth/auth-request.c contains function auth_request_fix_username(): The default domain is appended, before the character translation takes place. ======== if (strchr(username, '@') == NULL && request->auth->default_realm != NULL) { user = p_strconcat(request->pool, username, "@", request->auth->default_realm, NULL); } else { user = p_strdup(request->pool, username); } for (p = (unsigned char *)user; *p != '\0'; p++) { if (request->auth->username_translation[*p & 0xff] != 0) *p = request->auth->username_translation[*p & 0xff]; if (request->auth->username_chars[*p & 0xff] == 0) { *error_r = t_strdup_printf( "Username contains disallowed character: " "0x%02x", *p); return NULL; } } ========= I would change the first if() into: ========= if (strchr(username, '@') == NULL && strchr(username, '!') == NULL && request->auth->default_realm != NULL) { ========= Note the strchr() in the second line. The default domain is not appended, if either an Ad sign or exclamation mark is present in the username. Maybe, you ask Timo to have a way to conditionally let replace a set of characters into '@' before this check. Regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSwVYSnWSIuGy1ktrAQI/4gf/TFGCcTnIaxWsZiRFi/P0iSr0uyPdFP8+ dQMgAVkYYt/sP7PH28vZbMHHtiBtIb7T3FTiuNclXXZcLrfj3NX3zf8XfNFknd4j BzcghW+wE+2I9v4O5/WmKRD79herBCGOTnswOMcRk9zPrIL2lEjuDhOFsePQXjTI IYBybQx+EebAYRUwtVgUc1leQtaD02QtFLLM2EbIbIbNhnYLaOr6+YQs2Ghi6LpL MAbfsRh00L/AmY5NNXZUPK2UKpTyppBxVMwwv+K12FqABzs6PAdQz8LpdwqrRDOX 7Raze+KD4U9M9imLVgcD8dgdRnl6wGQJnTFiA0kgb0fyEqk/pL/tpg== =KieQ -----END PGP SIGNATURE-----

1 0

Re: [Dovecot] Combination of default domain and username character translation problem in POP3 server configuration
by Steffen Kaiser 19 Nov '09

19 Nov '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thu, 19 Nov 2009, Javier Vico Egea wrote: > auth default: > default_realm: myprincipaldomain.es > username_chars: > abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@! > username_translation: !@ > passdb: > driver: passwd-file > args: /etc/virtual/%d/passwd Hmm, what happens, if you login with: prueba(a)mysecondarydomain.es ? Note the @ Does it work? > userdb: > driver: static > args: uid=500 gid=500 home=/var/spool/virtual/%d Each use should have an unique home dir, I think. Regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSwVMWXWSIuGy1ktrAQIRiggArndG34u+zfOU41LXb8Nj6A5UMQ8o1cMv P8Ax+uKXyo9b7kae5N+ZeMkiVVMiALmMr6e7HJeKbTUdl6CFVc+Wa0TBdlpNVEJ0 d49A4IetnfVSWlfu21VR5hpenpsNE2E8JRHQ5Mb0eBaEFneT/VEk2YB7WfsmsvbF pS2gXhnBl1q8x+VtC/y5fyYB/P8urQU8wwdVTb809fLxUuMVDEUC77bHtXBtRHYT C0mF3ZyRmh3vFLwBb6e7VwhWkttbKlAzO7lsfNujEqA0dpjzeA+qOw+A2JmyH6sl ZTFpDWc/jv12+7m+AJB46CsPeKZ8/cfFVITni6G7aBrmGPseIVF3+w== =il6+ -----END PGP SIGNATURE-----

2 1

Re: [Dovecot] Combination of default domain and username character translation problem in POP3 server configuration
by Charles Marcus 19 Nov '09

19 Nov '09

On 11/19/2009, Javier Vico Egea (j.vico(a)dipualba.es) wrote: > # 1.0.7: /etc/dovecot.conf Not that this is the cause of your problem, but you do need to upgrade...

1 0

[Dovecot] Combination of default domain and username character translation problem in POP3 server configuration
by Vico 19 Nov '09

19 Nov '09

Hello, I have a mail server running vm-pop3 and I am migrating it to Dovecot. I have a problem configuring Dovecot as a POP3 server only (I'm not interested in IMAP for now). I have two types of domains: one principal domain, whose users don't include the domain in the login process; and secondary domains, whose users include the domain part with the ! separator, instead of @ (i.e. prueba!mysecondarydomain.es). Because of that, I have set the following options in the configuration file: auth_default_realm = myprincipaldomain.es auth_username_translation = !@ The combination of these two parameters produces the following effect when I login with an user of a secondary domain (I have no problem with principal domain authentication): +OK Bienvenido al servidor de correo. user prueba!mysecondarydomain.es +OK pass prueba. -ERR Authentication failed. quit +OK Logging out This is the resulting log: Nov 19 09:58:51 prueba dovecot: auth(default): new auth connection: pid=21953 Nov 19 09:59:04 prueba dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.1.84 rip=192.168.17.13 resp=AHBydWViYSF0b2JhcnJhLmVzAHBydWViYS4= Nov 19 09:59:04 prueba dovecot: auth(default): passwd-file(prueba@mysecondarydomain.es@myprincipaldomain.es,192.168.17. 13): no passwd file: /etc/virtual/mysecondarydomain.es(a)myprincipaldomain.es/passwd Nov 19 09:59:05 prueba dovecot: auth(default): client out: FAIL 1 user=prueba@mysecondarydomain.es@myprincipaldomain.es So, I think the problem is Dovecot tests if the default domain is needed before the character translation is done, so the character ! is not detected as a domain separator, so the default domain is always appended. The question is how I could resolve this problem. I need these two operations to be done because there is a lot of users already working with this configuration. Thank you in advance.

3 2

Re: [Dovecot] failed: Permission denied missing +w perm: /home/mail_virtual/2001
by Jürgen Herrmann 19 Nov '09

19 Nov '09

On Wed, November 18, 2009 17:29, Timo Sirainen wrote: > On Wed, 2009-11-18 at 16:17 +0100, Jürgen Herrmann wrote: >> 2009-11-18 16:04:24 dovecot: Fatal: chdir(/home/mail_virtual/2001) failed: >> Permission denied (euid=2001 egid=2001 stat(/home/mail_virtual/2001) >> failed: Permission denied missing +w perm: /home/mail_virtual/2001) > > so "ls -dln /home/mail_virtual/2001" actually shows that the owner and > group is 2001? app3:~# ls -dln /home/mail_virtual/2001 drwx------ 4 2001 2001 4096 18. Nov 13:59 /home/mail_virtual/2001 app3:~# ls -dln /home/mail_virtual/2001/Maildir/ drwx------ 54 2001 2001 4096 18. Nov 18:07 /home/mail_virtual/2001/Maildir/ > > Do you have SELinux or something similar enabled? > no. regards, jürgen -- >> XLhost.de - eXperts in Linux hosting ® << XLhost.de GmbH Jürgen Herrmann, Geschäftsführer Boelckestrasse 21, 93051 Regensburg, Germany Geschäftsführer: Volker Geith, Jürgen Herrmann Registriert unter: HRB9918 Umsatzsteuer-Identifikationsnummer: DE245931218 Fon: +49 (0)800 XLHOSTDE [0800 95467833] Fax: +49 (0)800 95467830 WEB: http://www.XLhost.de IRC: #XLhost(a)irc.quakenet.org

2 2

[Dovecot] unix_listener with user/group setting
by Pascal Volk 19 Nov '09

19 Nov '09

Hi Timo, are there any plans for configurable user/group settings for a Unix socket? I had tried this configuration: service auth { user = nobody unix_listener /var/spool/postfix/private/auth { mode = 0600 user = postfix group = postfix } } The mode of the socket was fine but it was owned by nobody. Regards, Pascal -- The trapper recommends today: fabaceae.0932304(a)localdomain.org

2 2

[Dovecot] v2.0.tip Panic: file index-storage.c: line 385 (index_storage_mailbox_open): assertion failed: (!box->opened)
by Pascal Volk 19 Nov '09

19 Nov '09

Hi Timo, I've tried to convert the Maildir from the first user: /usr/local/libexec/dovecot/convert-tool j.doe(a)example.com \ /srv/mail/1/70003/70008 \ maildir:/srv/mail/1/70003/70008/Maildir \ mdbox:/srv/mail/1/70003/70008/mdbox Panic: file index-storage.c: line 385 (index_storage_mailbox_open): assertion failed: (!box->opened) Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0 [0xf7e7ef8b] -> /usr/local/lib/dovecot/libdovecot.so.0(default_error_handler+0) [0xf7e7f01b] -> /usr/local/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xf7e7f1ad] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_open+0x9a) [0xf7f333ed] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(dbox_mailbox_open+0x76) [0xf7f43cb6] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_open+0x7d) [0xf7edb915] -> /usr/local/libexec/dovecot/convert-tool [0x804a847] -> /usr/local/libexec/dovecot/convert-tool [0x804a996] -> /usr/local/libexec/dovecot/convert-tool(convert_storage+0x270) [0x804ad35] -> /usr/local/libexec/dovecot/convert-tool(main+0x333) [0x8049cc7] -> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xf7cfeb35] -> /usr/local/libexec/dovecot/convert-tool [0x8049901] Aborted (core dumped) The backtrace is attached. Regards, Pascal -- The trapper recommends today: deadbeef.0931510(a)localdomain.org

2 3

[Dovecot] Unknown column mail_plugins in field list
by juan carlos 18 Nov '09

18 Nov '09

I have installed debian lenny, postfix 2.5.5 and dovecot 1.0.15 and can't send emails locally. this is the error in the log Error: auth-worker(default): sql(xxx(a)yyy.com): User query failed: Unknown column 'mail_plugins' in 'field list'

2 2

[Dovecot] Maildirs++ on ext4
by Rodolfo Gonzalez Gonzalez 18 Nov '09

18 Nov '09

Hi, happy after migrating from Courier to Dovecot without major issues, and saving 3 Gb of RAM after the migration, now I'm going to move everything to a 5 Tb RAID6 array. There's another thread on SATA and cluster fs, but for now I'm looking for the best filesystem in your experience. Currently I use Reiser, but I'd like to know if someone has worked with ext4 and Dovecot's maildir++. Thanks. P.S. I have UPS and generator, but my RAID card doesn't have backup battery.

2 1

Re: [Dovecot] expire_dict - Folder names with spaces
by michael＠euroinfissi.eu 18 Nov '09

18 Nov '09

Yes but how to setup the expire tool for foldernames that contain spaces? expire: Wiadomo&AVs-ci-&AVo-mieci 7 Elementy?usuni&ARk-te 7 INBOX 365 does not work... and expire: Wiadomo&AVs-ci-&AVo-mieci 7 Elementy usuni&ARk-te 7 INBOX 365 produces the following: Stopping Dovecot Imap: [ OK ] Starting Dovecot Imap: ☺ILoading modules from directory: /usr/lib64/dovecot/imap ☺IModule loaded: /usr/lib64/dovecot/imap/lib10_quota_plugin.so ☺IModule loaded: /usr/lib64/dovecot/imap/lib11_imap_quota_plugin.so ☺IModule loaded: /usr/lib64/dovecot/imap/lib20_autocreate_plugin.so ☺IModule loaded: /usr/lib64/dovecot/imap/lib20_expire_plugin.so ☺IEffective uid=99, gid=99, home=/tmp ☺IQuota root: name=user backend=dict args=:proxy::quota ☺IQuota rule: root=user mailbox=* bytes=1073741824 messages=0 ☺IQuota warning: bytes=1020054732 (95%) messages=0 command=/usr/local/bin/quota-warning.sh 95 ☺IQuota warning: bytes=858993459 (80%) messages=0 command=/usr/local/bin/quota-warning.sh 80 ☺Iexpire: pattern=Wiadomo&AVs-ci-&AVo-mieci type=expunge secs=604800 ☺Iexpire: pattern=Elementy type=expunge secs=0 ☺Iexpire: pattern=7 type=expunge secs=0 ☺Fexpire: Missing expire days for mailbox '365' Error: imap dump-capability process returned 89 Fatal: Invalid configuration in /etc/dovecot.conf

2 1