- dovecot - dovecot.org

[Dovecot] Web-Interface for Dovecot-Sieve?
by Daniel Spannbauer 18 Nov '09

18 Nov '09

Hello, is there anywhere a web-interface for managing sieve-filters with dovecot? Regards Daniel -- Daniel Spannbauer Software Entwicklung marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-27 Fax -11 Rechbergstr. 4 - 6, D 87727 Babenhausen Mobil +49 171 4033220 http://www.marco.de/ Email ds(a)marco.de Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München

11 17

[Dovecot] cache auth clear
by Juan Carlos Sanchez 18 Nov '09

18 Nov '09

Hello: Have found probably auth cache clearing is not working well. I get this log after issuing several SIGUSR2 and SIGHUP from command line: Nov 18 13:56:26 dovecot: Info: Dovecot v1.2.6 starting up Nov 18 13:56:33 auth(default): Info: Authentication cache hits 5/14 (35%) Nov 18 13:56:33 auth(default): Info: Authentication cache inserts: positive: 9 1213B, negative: 0 0B Nov 18 13:57:40 auth(default): Info: Authentication cache hits 47/112 (41%) Nov 18 13:57:40 auth(default): Info: Authentication cache inserts: positive: 65 8322B, negative: 0 0B Nov 18 13:58:00 auth(default): Info: Authentication cache hits 25/45 (55%) Nov 18 13:58:00 auth(default): Info: Authentication cache inserts: positive: 21 2721B, negative: 0 0B Nov 18 13:58:24 auth(default): Info: SIGHUP received, clearing cache Nov 18 13:58:57 auth(default): Info: Authentication cache hits 58/121 (47%) Nov 18 13:58:57 auth(default): Info: Authentication cache inserts: positive: 63 8223B, negative: 0 0B As you can see after the SIGHUP and supposed cache clearing, then cache stats continue growing as if nothing had been cleaned. Is this normal behaviour ? Dovecot version is 1.2.6 Thanks. -- ------------------------------------------------------ Juan Carlos Sanchez Hernandez Responsable de Seguridad y Correo Electronico Servicio de Planificacion Informatica y Comunicaciones Universidad Politecnica de Madrid Rectorado Avda. Ramiro de Maeztu 7 28040 Madrid ------------------------------------------------------

2 1

[Dovecot] failed: Permission denied missing +w perm: /home/mail_virtual/2001
by Jürgen Herrmann 18 Nov '09

18 Nov '09

hi there! i'm trying to run dovecot 1.2.4 managesieve service with mysql auth. authentication is obviously going fine, i have debug_auth set to on and can see log lines indicating auth success: 2009-11-18 16:04:24 auth(default): Info: client in: AUTH 1 PLAIN service=pop3 secured lip=127.0.0.1 rip=127.0.0.1 lport=10100 rport=42497 resp=<hidden> 2009-11-18 16:04:24 auth-worker(default): Info: sql(jh(a)new.xlhost.de,127.0.0.1): query: SELECT alias as user, password, home as userdb_home, vuid as userdb_uid, vgid as userdb_gid FROM virtual_mailbox WHERE alias = 'jh(a)new.xlhost.de' 2009-11-18 16:04:24 auth(default): Info: client out: OK 1 user=jh(a)new.xlhost.de 2009-11-18 16:04:24 auth(default): Info: master in: REQUEST 1 27482 1 2009-11-18 16:04:24 auth-worker(default): Info: sql(jh(a)new.xlhost.de,127.0.0.1): SELECT home, vuid AS uid, vgid AS gid FROM virtual_mailbox WHERE alias = 'jh(a)new.xlhost.de' 2009-11-18 16:04:24 auth(default): Info: master out: USER 1 jh(a)new.xlhost.de home=/home/mail_virtual/2001 uid=2001 gid=2001 2009-11-18 16:04:24 pop3-login: Info: Login: user=<jh(a)new.xlhost.de>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured however then managesieve tries to chdir to the user's homedir, which fails: 2009-11-18 16:04:24 dovecot: Fatal: chdir(/home/mail_virtual/2001) failed: Permission denied (euid=2001 egid=2001 stat(/home/mail_virtual/2001) failed: Permission denied missing +w perm: /home/mail_virtual/2001) 2009-11-18 16:04:24 dovecot: Error: child 27589 (pop3) returned error 89 (Fatal failure) the user's homedir /home/mail_virtual/2001 ist set to 705 (also tried 700, 755, 770, 775 and 777) but still not write access. the mail/homedirs are definitely writeable by their respective (virtual) owners because postfix/maildrop is delivering to it and courier imap is currently reading from it just fine. any hints, please? best regards, jürgen herrmann -- >> XLhost.de - eXperts in Linux hosting ® << XLhost.de GmbH Jürgen Herrmann, Geschäftsführer Boelckestrasse 21, 93051 Regensburg, Germany Geschäftsführer: Volker Geith, Jürgen Herrmann Registriert unter: HRB9918 Umsatzsteuer-Identifikationsnummer: DE245931218 Fon: +49 (0)800 XLHOSTDE [0800 95467833] Fax: +49 (0)800 95467830 WEB: http://www.XLhost.de IRC: #XLhost(a)irc.quakenet.org

2 1

[Dovecot] Thunderbird Search Folder failures
by Michael Durket 18 Nov '09

18 Nov '09

In converting everyone at our site from UW-IMAP I've run into another problem with Thunderbird users that I'm hoping someone can help me with. The dovecot version I'm running is old (1.0.13 - we don't do production upgrades that often but I'm perfectly willing to install a newer version). The affected Thunderbird users are running Thunderbird version 2.0023 under Windows. All mail is stored in mbox format. What appears to be happening is that searches looking for string matches in the message body don't work. I set up a test case with the affected user. We created a folder that had 6 messages: 5 containing the string in the message body and 1 that did not. Then we set up a search folder that looked for the string. Opening the Thunderbird search folder yielded no messages matching the search. A rawlog trace of the search in dovecot showed that dovecot had indeed responded that no messages were found (when 5 should have been). This doesn't happen with UW-IMAP (version imap-2007e which I think is the last version with bug fixes ever issued). Is this perhaps a known bug in dovecot that was fixed many releases ago and I should upgrade?

2 1

Re: [Dovecot] setting up home directories
by Steffen Kaiser 18 Nov '09

18 Nov '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tue, 17 Nov 2009, Cliff Hayes wrote: > I did look at that prior to posting. I'm not using virtual users ... all my > users are system users. It does not matter whether you have system users or not, the useage is the same. > Do I just add the maildir component as follows the home directory is no mail_location. Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSwOwbHWSIuGy1ktrAQIZ8Af/fPr1Ll1SpB1vIzQ+5Rrq0rPsbt5cyAfn /KQi/4AEO4A83ZXgUgcri0swjFf6HzzUpRbUogjatltE7pJcYLEb46Ufz+Eh9mOx JsP+6Ez/0+LA4uyuWD7E1jur9ibQFi9QpUXGrleVfnLxPWwyfcptL0GuiMh6ZPVj +zM4mBzoBUVrxQ0kc4s2/qtuLzKqpMazNxnqpvYyv7I1jzwteTD7v1XhynJeBD3g krSPXzuv1UZiCSO5fRlPbaQhN/MEyf4dLQxDhjCnI2K20o+GZ/G9fqWd8bhl295B 3kdxjyM8JgPKfstV24zgT+DiASe+vrzAOOihYSXGqMq2maBMbn14PQ== =T+sB -----END PGP SIGNATURE-----

1 0

[Dovecot] address of dovecot server
by Seb 18 Nov '09

18 Nov '09

Hi, How can I find out what the address of my dovecot server is? The server is working fine in my Debian sid machine, and clients can check it using the intranet name of the server machine. However, I'm not sure what address to provide in clients outside my home network so they can access the server. Is it simply the standard convention of 'machine.domain.com' address of the server? Thanks for any help. Cheers, -- Seb

2 1

[Dovecot] address of dovecot server
by Seb 18 Nov '09

18 Nov '09

Hi, How can I find out what the address of my dovecot server is? The server is working fine, and clients can check it using the intranet name of the server machine. However, I'm not sure what address to provide in clients outside my home network so they can access the server. Is it simply the standard convention of 'machine.domain.com' address of the server? Thanks for any help. Cheers, -- Seb

1 0

[Dovecot] plugin cmusieve not found
by juan carlos 18 Nov '09

18 Nov '09

I have debian lenny and dovecot 1.2.4 and a problem with the plugin cmusieve. protocol lda { postmaster_address = postmaster(a)cablenet.com.pe mail_plugins = cmusieve quota log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } the log /var/log/dovecot-deliver.log shows me the following Fatal: Plugin cmusieve not found from directory /usr/lib/dovecot/modules/lda When I list the directory /usr/lib/dovecot/modules/lda, it was not found the cmusieve plugin. Where can i get it? # ls -l /usr/lib/dovecot/modules/lda lrwxrwxrwx 1 root root 22 nov 12 21:20 lib01_acl_plugin.so lrwxrwxrwx 1 root root 24 nov 12 21:20 lib10_quota_plugin.so lrwxrwxrwx 1 root root 24 nov 12 21:20 lib11_trash_plugin.so lrwxrwxrwx 1 root root 29 nov 12 21:20 lib20_autocreate_plugin.so lrwxrwxrwx 1 root root 26 nov 12 21:20 lib20_convert_plugin.so lrwxrwxrwx 1 root root 25 nov 12 21:20 lib20_expire_plugin.so lrwxrwxrwx 1 root root 22 nov 12 21:20 lib20_fts_plugin.so lrwxrwxrwx 1 root root 29 nov 12 21:20 lib20_listescape_plugin.so lrwxrwxrwx 1 root root 27 nov 12 21:20 lib20_mail_log_plugin.so lrwxrwxrwx 1 root root 26 nov 12 21:20 lib20_virtual_plugin.so lrwxrwxrwx 1 root root 28 nov 12 21:20 lib21_fts_squat_plugin.so -rw-r--r-- 1 root root 3663976 nov 15 23:04 lib90_sieve_plugin.a -rwxr-xr-x 1 root root 1029 nov 15 23:04 lib90_sieve_plugin.la -rwxr-xr-x 1 root root 1777465 nov 15 23:04 lib90_sieve_plugin.so

4 4

[Dovecot] 2.0.alpha3 ssl_ca_file is broken
by Mike Abbott 17 Nov '09

17 Nov '09

In dovecot-2.0.alpha3, setting "ssl_ca_file = /path/to/file" in conf.d/ssl.conf does not work, because imap-login chroots before opening the ca_file. Perhaps this parameter could be replaced with "ssl_ca = </path/to/file" as was done with ssl_cert and ssl_key. Tue Nov 17 11:19:38 server dovecot[1143]: imap-login: Fatal: Error reading configuration: Invalid settings: ssl_ca_file: access(/path/to/file) failed: No such file or directory

2 2

[Dovecot] automatically compiling sieve scripts
by Edgar Fuß 17 Nov '09

17 Nov '09

Without having looked into the code: Does Pigeonhole automatically compile a sieve script if the compiled form is not /strictly/ newer than the text form? I'm running into the problem that during automatic installation of a global sieve-after script, my Makefile has a rule to compile, yet afterwards, the sieve plugin complains about not being able to compile (which is correct, but it shouldn't try in the first place). Both text and binary form have identical time stamps. I don't want to sleep between install and sievec.

2 2

[Dovecot] 2.0.alpha3 dovecot/auth works multiplying
by Alan Commike 17 Nov '09

17 Nov '09

I setup a test machine with 2.0.alpha3 - Linux, Centos 5.4. I'm using Postfix as my MTA with dovecot to do SASL authorization from /etc/{passwd,shadow}. I'm getting 'dovecot/auth -w' processes hanging around, over a few days I've reached into the 100s. As a test I set auth_worker_max_count = 2, didn't make a difference. Attaching with strace, looks like they're in their standard poll loop waiting for input. Any ideas? I haven't instrumented any of the code yet to see what's going on. I expect somehow you're losing track that the auth worker is out there? I have an old 1.x installation working with a similar setup. Here's the config: [root@pf ~]# dovecot -n # 2.0.alpha3: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-164.el5 i686 CentOS release 5.4 (Final) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_worker_max_count = 2 base_dir = /var/run/dovecot/ debug_log_path = /var/log/dovecot info_log_path = /var/log/dovecot listen = * log_path = /var/log/dovecot mail_debug = yes mail_location = maildir:~/Maildir passdb { deny = no driver = shadow } postmaster_address = postmaster(a)projectfoodie.com protocols = imap imaps service imap-login { inet_listener { port = 993 ssl = yes } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 511 user = postfix } } ssl = required ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = blocking=yes driver = passwd } userdb { args = /etc/passwd driver = passwd-file } verbose_proctitle = yes verbose_ssl = yes -- Alan Commike Founder, QEDLabs commike(a)qedlabs.com http://www.qedlabs.com 408.472.3202

1 0

[Dovecot] Problem with stored procedure
by Fcuk F 17 Nov '09

17 Nov '09

Hi Timo/all I am trying to use stored procedure for password query when it try to connect i get authenticated only for the first user after that for subsequent user it gives me this error. Password query failed: Commands out of sync; you can't run this command now You might have solved this issue before, did some search just found this http://www.dovecot.org/list/dovecot/2006-October/017041.html (not resloved) Could you please guide me how to resolve this issue. thanks in advance. *dovecot-mysql.conf* connect = host=xxxx dbname=dovecot user=xxx password=xxxxx client_flags=65536 user_query = SELECT xx as uid, xx as gid, home FROM table WHERE User = '%u' password_query = call proxyMayBe('%u','%w','%r'); *Dovecot -n : *# 1.2.6: /etc/dovecot.conf # OS: Linux 2.6.18-164.el5 x86_64 CentOS release 5.4 (Final) base_dir: /var/run/dovecot/ log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log protocols: imap pop3 listen: * ssl: no login_dir: /var/run/dovecot//login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_process_per_connection: no login_processes_count: 30 mail_location: maildir:~/ mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: passdb: driver: sql args: /etc/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot-mysql.conf

2 2

[Dovecot] setting up home directories
by Cliff Hayes 17 Nov '09

17 Nov '09

Hello, I have not been using the home directory but I read in MailLocation.txt that I probably should. Does dovecot create each directory? What does it put in there? My server uses mbox format. My users all look like this: [root@sendmail log]# finger chayes Login: chayes Name: 50387.00 Directory: /home/chayes Shell: /sbin/nologin Never logged in. Mail last read Mon Nov 16 19:56 2009 (CST) No Plan. So each user does have a home directory assigned, but it is never created. Here is my current mail_location: mail_location = mbox:/var/empty:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u Do I just add the maildir component as follows: mail_location = mbox:/var/empty:INBOX=/var/spool/mail/%u:INDEX=/var/indexes/%u:maildir:/home /u% I'm confused by the MailLocation.txt entry below which says not to mix maildir and mbox formats. ---%<----------------------------------------------------------------------- -- mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_location = maildir:~/Maildir:INBOX=~/Maildir/.INBOX ---%<----------------------------------------------------------------------- -- Note that it's still not possible to mix maildir and mbox formats this way. You need to use<namespaces> [Namespaces.txt] for that. Thanks in advance, Cliff

2 1

[Dovecot] dovecot 1.2.7 : configure: error: Can't build with LDAP support: libldap not found
by Santhosh A. J 17 Nov '09

17 Nov '09

hi i have downloaded the dovecot 1.2.7 source when i tried to compile with ldap support it gives the error "configure: error: Can't build with LDAP support: libldap not found". i am attaching the log file with this mail. i want to use it with latest apacheDS. Thanks in advance

2 1

[Dovecot] deliver is ignoring mail_access_groups
by Peter 17 Nov '09

17 Nov '09

Ubuntu 8.04LTS Dovecot 1.2.6 Postfix 2.5.1 I'm using dovecot imap/deliver in an environment where I don't want users with shell access to reach their mail folders (partly to do with IMAP ACLs requiring open group permissions and partly to do with not wanting users to mess their mail folders / sieve configs up). I specifically don't want to switch to a "single dovecot user" style installation. Current config: mail_location = maildir:/home/mail/%d/%n/Maildir mail_privileged_group = mail mail_access_groups = maildir drwxrws--- 3 nobody maildir 21 2009-11-15 10:52 /home/mail drwxrws--- 4 nobody adomain.com 30 2009-11-15 12:12 /home/mail/adomain.com/ drwxrws--- 3 auser adomain.com 20 2009-11-15 10:52 /home/mail/adomain.com/auser drwxrws--- 3 auser adomain.com 20 2009-11-15 10:52 /home/mail/adomain.com/auser/Maildir And so on... As expected IMAP and Managesieve work perfectly, but deliver fails: Nov 15 12:48:26 s15364807 dovecot: deliver(auser(a)adomain.com): sieve: stat(/home/mail/adomain.com/auser/.dovecot.sieve) failed: Permission denied (using global script path in stead) Nov 15 12:28:06 s15364807 dovecot: deliver(auser(a)adomain.com): stat(/home/mail/adomain.com/auser/Maildir) failed: Permission denied Nov 15 12:28:06 s15364807 dovecot: deliver(auser(a)adomain.com): stat(/home/mail/adomain.com/auser/Maildir/tmp) failed: Permission denied (euid=1002(auser) egid=1001(adomain.com) missing +x perm: /home/mail) Nov 15 12:28:06 s15364807 dovecot: deliver(auser(a)adomain.com): msgid=<20091115122806.79A0F80034F(a)servername.com>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2009-11-15 12:28:06] Opening the permissions on /home/mail (6771) allows deliver to succeed suggesting that mail_access_groups is being ignored by deliver. As a work-around I can set /home/mail to 6771 but this is not ideal as anyone somehow guessing the directory structure could access mail of another user in the same group regardless of IMAP acl settings. Yes, I can severely obfuscate it but it's not secure. I've spent about half a day trying to figure this out, I'm assuming at this point that either I'm missing something obvious or something else is wrong. Any ideas? Peter.

4 5

[Dovecot] read() failed with subscription file
by david＠davidwbrown.name 16 Nov '09

16 Nov '09

Hello Dovecot folks, I have Dovecot running reasonably well against my Postfix SMPTd. All mail is stored in Maildir format only. In my Thunderbird client I can see the Inbox, Trash and Sent folders in the Thunderbird pane but no other directories. I have very many Maildir format directories under my Inbox directory but I cannot see them in the Thunderbird client. I have the Dovecot info and debug log runnning with the solitary error message being displayed in the log when ever I access the Thunderbird client folders pane as stated below. Particulars follow and please advise, David. OS: CentOS 5.2 Postfix: 2.3.3 Dovecot: 1.2 Dovecot log: dovecot: IMAP(user): read() failed with subscription file /home/user/Maildir/subscriptions: Is a directory

2 1

[Dovecot] Replace message headers
by Matthias-Christian Ott 16 Nov '09

16 Nov '09

Hi, I'm looking for a way to replace specific message headers of a mail via the mail storage API. Any suggestions? Regards, Matthias-Christian

2 1

[Dovecot] fetch bodystructure filename problem rfc2231
by myleetlist＠gmx.de 16 Nov '09

16 Nov '09

Hi, I have a problem with the filename of attachments in some clients. # dovecot 1.2.(5|7) * 3 FETCH (BODYSTRUCTURE (("text" "plain" ("charset" "us-ascii") NIL NIL "7bit" 13 1 NIL NIL NIL NIL)("text" "plain" ("charset" "UTF-8" "name" "ISO-8859-1''testanh%E4ng.txt") NIL NIL "8bit" 27 1 NIL ("attachment" ("filename" "ISO-8859-1''testanh%E4ng.txt")) NIL NIL) "mixed" ("boundary" "=-+zw7hjwJmiqfzphlbHnu") NIL NIL NIL)) -> wrong filename in client: ISO-8859-1''testanh%E4ng.txt # cyrus * 808 FETCH (BODYSTRUCTURE (("TEXT" "PLAIN" NIL NIL NIL "7BIT" 13 1 NIL NIL NIL)("TEXT" "PLAIN" ("NAME*" {28} ISO-8859-1''testanh%E4ng.txt "CHARSET" "UTF-8") NIL NIL "8BIT" 27 1 NIL ("ATTACHMENT" ("FILENAME*" {28} ISO-8859-1''testanh%E4ng.txt)) NIL) "MIXED" ("BOUNDARY" "=-+zw7hjwJmiqfzphlbHnu") NIL NIL)) -> correct filename in client: testanhäng.txt I think "name" should be "name*" (rfc 2231?) What can I do? Test mail: --> Subject: test From: ... To: ... Content-Type: multipart/mixed; boundary="=-+zw7hjwJmiqfzphlbHnu" Date: Fri, 06 Nov 2009 09:48:26 +0000 Message-Id: <1257500906.7739.0.camel@localhost> Mime-Version: 1.0 X-Mailer: Evolution 2.22.3.1 X-CheckCompat: OK --=-+zw7hjwJmiqfzphlbHnu Content-Type: text/plain Content-Transfer-Encoding: 7bit inhalt mail --=-+zw7hjwJmiqfzphlbHnu Content-Disposition: attachment; filename*=ISO-8859-1''testanh%E4ng.txt Content-Type: text/plain; name*=ISO-8859-1''testanh%E4ng.txt; charset=UTF-8 Content-Transfer-Encoding: 8bit inhalt.. auch mit umlaüt --=-+zw7hjwJmiqfzphlbHnu-- <-- -- DSL-Preisknaller: DSL Komplettpakete von GMX schon für 16,99 Euro mtl.!* Hier klicken: http://portal.gmx.net/de/go/dsl02

2 3

[Dovecot] Dovecot+Sieve Please Help!...
by Andrey Garkin 16 Nov '09

16 Nov '09

Dovecot Sieve Plugin... 1. ./configure --with-dovecot=/usr/lib/dovecot make make install protocol lda { postmaster_address = postmaster(a)kipalex.ru mail_plugins = sieve } plugin { sieve = /home/vmail/kipalex.ru/andrey(a)kipalex.ru/dovecot.sieve } 2. dovecot.sieve file in /home/vmail/kipalex.ru/andrey(a)kipalex.ru require "fileinto"; if header :contains "Subject" "***SPAM***" { fileinto "/home/vmail/kipalex.ru/andrey(a)kipalex.ru/.Spam/new"; } And in the dovecot.log I see: 2009-11-16 13:45:55 deliver(andrey(a)kipalex.ru): Error: sieve: msgid=<351009bd0911160227r6ef9f39fja32c2893cb7fc54e(a)mail.gmail.com>: failed to store into mailbox '/home/vmail/kipalex.ru/andrey(a)kipalex.ru/.Spam/new': Invalid mailbox name 2009-11-16 13:45:55 deliver(andrey(a)kipalex.ru): Error: sieve: execution of script /home/vmail/kipalex.ru/andrey(a)kipalex.ru/dovecot.sieve failed, but implicit keep was successful Mail system is already up and working... Please Help... Why Dovecot plugin is not working???

3 3

[Dovecot] More dovecot-2.0.alpha2 problems
by Mike Abbott 16 Nov '09

16 Nov '09

1. My earlier patch to fix a typo in array.h was not good enough. Here's one that not only compiles, but also doesn't crash: --- dovecot-2.0.alpha2/src/lib/array.h 2009-10-08 10:04:35.000000000 -0500 +++ dovecot/src/lib/array.h 2009-10-29 20:47:47.000000000 -0500 @@ -72,8 +72,7 @@ (elem)++) # define array_foreach_modifiable(array, elem) \ for (elem = ARRAY_TYPE_CAST_MODIFIABLE(array) \ - buffer_get_modifiable_data((array)->arr.buffer, NULL)) + \ - (array)->arr.buffer->used; \ + buffer_get_modifiable_data((array)->arr.buffer, NULL); \ elem != CONST_PTR_OFFSET(*(array)->v, (array)->arr.buffer- >used); \ (elem)++) #endif 2. Sometimes I see a flood of these errors in the log: [...] Fri Oct 30 14:45:23 server dovecot[9585]: imap: service(imap): dup2s failed Fri Oct 30 14:45:23 server dovecot[9585]: imap-login: Login: user=<userX>, method=PLAIN, rip=192.168.1.8, lip=192.168.1.7, pid=11362 Fri Oct 30 14:45:23 server dovecot[9585]: imap(pid 11362 user userX): Connection closed bytes=118/934 Fri Oct 30 14:45:23 server dovecot[9585]: imap: dup2(-1, 5) failed: Bad file descriptor Fri Oct 30 14:45:23 server dovecot[9585]: imap: service(imap): dup2s failed Fri Oct 30 14:45:23 server dovecot[9585]: imap-login: Login: user=<userY>, method=PLAIN, rip=192.168.1.8, lip=192.168.1.7, pid=11363 Fri Oct 30 14:45:23 server dovecot[9585]: imap(pid 11363 user userY): Connection closed bytes=118/972 Fri Oct 30 14:45:23 server dovecot[9585]: imap: dup2(-1, 5) failed: Bad file descriptor Fri Oct 30 14:45:23 server dovecot[9585]: imap: service(imap): dup2s failed [...] 3. imap crashed when using mdbox: Fri Oct 30 14:54:49 server dovecot[11491]: imap(pid 11938 user userZ): dbox /Volumes/Mail/userZ/mailboxes/INBOX/Sent/dbox-Mails: map uidvalidity mismatch (1256918863 vs 1256919073) Fri Oct 30 14:54:49 server dovecot[11491]: imap(pid 11938 user userZ): Disconnected: Internal error occurred. Refer to server log for more information. [2009-10-30 14:54:49] bytes=553447/2146313 Fri Oct 30 14:54:49 server dovecot[11491]: imap(pid 11938 user userZ): dbox /Volumes/Mail/userZ/storage: rebuilding indexes Fri Oct 30 14:54:49 server dovecot[11491]: imap(pid 11938 user user): Panic: file dbox-file.c: line 308 (dbox_file_get_mail_stream): assertion failed: (file->input != NULL) 0 libSystem.B.dylib 0x00007fff875f4eba __kill + 10 1 libSystem.B.dylib 0x00007fff875f4eac kill + 14 2 libSystem.B.dylib 0x00007fff87683519 raise + 25 3 libSystem.B.dylib 0x00007fff876a4e12 abort + 90 4 libdovecot.0.dylib 0x00000001000e8027 i_set_failure_file + 275 5 libdovecot.0.dylib 0x00000001000e6eef i_set_failure_internal + 103 6 libdovecot.0.dylib 0x00000001000e76d2 i_debug + 0 7 libdovecot-storage.0.dylib 0x000000010005768a dbox_file_seek_next + 0 8 libdovecot-storage.0.dylib 0x000000010005772a dbox_file_seek_next + 160 9 libdovecot-storage.0.dylib 0x0000000100084266 mdbox_storage_rebuild + 1406 10 libdovecot-storage.0.dylib 0x0000000100085617 mdbox_mailbox_alloc + 1271 11 libdovecot-storage.0.dylib 0x00000001000271e1 mail_storage_unref + 93 12 libdovecot-storage.0.dylib 0x0000000100023386 mail_namespace_get_storage_name + 162 13 libdovecot-storage.0.dylib 0x0000000100023429 mail_namespaces_deinit + 35 14 libdovecot-storage.0.dylib 0x0000000100028c39 mail_user_alloc + 311 15 libdovecot-storage.0.dylib 0x000000010002889a mail_user_unref + 40 16 imap 0x0000000100007fa4 client_destroy + 404 17 imap 0x0000000100006eb3 client_input + 87 18 libdovecot.0.dylib 0x00000001000eca50 io_loop_handler_run + 224 19 libdovecot.0.dylib 0x00000001000ed55a io_loop_run + 56 20 libdovecot.0.dylib 0x00000001000e393d master_service_run + 27 21 imap 0x000000010000fb45 main + 557 22 imap 0x0000000100000dd0 start + 52 Hope this helps.

2 2

[Dovecot] file_dotlock_create(~/.dovecot.lda-dupes) failed: No such file or directory
by Rene Bakkum 16 Nov '09

16 Nov '09

Hi, I am having some problems with my vacation messages using dovecot. The mail is send without problems, and the auto-respond is working as well. But its always auto-responding, because the lda-dupes file can't be created. See mail log below: Nov 16 13:43:03 mail003 postfix/smtpd[6501]: connect from mail-bw0-f211.google.com[209.85.218.211] Nov 16 13:43:03 mail003 postfix/smtpd[6501]: D6FE6F64F: client=mail-bw0-f211.google.com[209.85.218.211] Nov 16 13:43:03 mail003 postfix/cleanup[6505]: D6FE6F64F: message-id=<4B014929.1000008(a)gmail.com> Nov 16 13:43:03 mail003 postfix/qmgr[27330]: D6FE6F64F: from=<[my.gmail.account]>, size=1946, nrcpt=1 (queue active) Nov 16 13:43:03 mail003 deliver([my.test.account]): file_dotlock_create(~/.dovecot.lda-dupes) failed: No such file or directory Nov 16 13:43:03 mail003 postfix/pickup[5934]: F202DF690: uid=5000 from=<> Nov 16 13:43:03 mail003 deliver([my.test.account]): msgid=<4B014929.1000008(a)gmail.com>: sent vacation response to <[my.gmail.account]> Nov 16 13:43:03 mail003 postfix/cleanup[6505]: F202DF690: message-id=<dovecot-1258375383-947629-0@mail003> Nov 16 13:43:04 mail003 postfix/qmgr[27330]: F202DF690: from=<>, size=570, nrcpt=1 (queue active) Nov 16 13:43:04 mail003 deliver([my.test.account]): msgid=<4B014929.1000008(a)gmail.com>: saved mail to INBOX Nov 16 13:43:04 mail003 postfix/pipe[6506]: D6FE6F64F: to=<[my.test.account]>, relay=dovecot, delay=0.21, delays=0.08/0.01/0/0.12, dsn=2.0.0, status=sent (delivered via dovecot service) Nov 16 13:43:04 mail003 postfix/qmgr[27330]: D6FE6F64F: removed Nov 16 13:43:05 mail003 postfix/smtp[6510]: F202DF690: to=<[my.gmail.account]>, relay=gmail-smtp-in.l.google.com[74.125.93.114]:25, delay=1.6, delays=0.07/0.01/0.32/1.2, dsn=2.0.0, status=sent (250 2.0.0 OK 1258375453 7si18156568qwb.35) Nov 16 13:43:05 mail003 postfix/qmgr[27330]: F202DF690: removed I manually created the file, but its keeping getting the message: root@mail003:/home/vmail/mydomain.com/info/.Maildir# ls -la drwx------ 6 vmail vmail 4096 2009-11-16 14:04 . drwx------ 3 vmail vmail 4096 2009-11-16 12:37 .. drwx------ 2 vmail vmail 4096 2009-11-16 14:04 cur -rw------- 1 vmail vmail 340 2009-11-16 13:49 dovecot.index -rw------- 1 vmail vmail 22528 2009-11-16 14:04 dovecot.index.cache -rw------- 1 vmail vmail 7000 2009-11-16 14:04 dovecot.index.log -rwx------ 1 vmail vmail 0 2009-11-16 14:03 .dovecot.lda-dupes -rwx------ 1 vmail vmail 485 2009-11-16 12:33 .dovecot.sieve -rw------- 1 vmail vmail 208 2009-11-16 12:56 .dovecot.sievec -rw------- 1 vmail vmail 522 2009-11-16 14:04 dovecot-uidlist -rw------- 1 vmail vmail 8 2009-11-11 14:31 dovecot-uidvalidity -rw------- 1 vmail vmail 0 2009-11-11 14:31 dovecot-uidvalidity.4afabcaa drwx------ 2 vmail vmail 4096 2009-11-16 14:04 new -rw------- 1 vmail vmail 6 2009-11-11 14:45 subscriptions drwx------ 2 vmail vmail 4096 2009-11-16 14:04 tmp drwx------ 5 vmail vmail 4096 2009-11-11 14:45 .Trash Is the ~/.dovecot.lda-dupes linking to another path, and how can I adjust this so it searches for /home/vmail/%d/%n/.Maildir/ ? Thanks, - Rene

2 2

[Dovecot] Panic: Message unexpectedly expunged from index
by Cliff Hayes 16 Nov '09

16 Nov '09

Hello, I just installed Fedora 11 with Dovecot 1.2.6 and am now seeing a steady stream of these in maillog: Nov 15 15:52:03 sendmail dovecot: POP3(<username>): Panic: Message unexpectedly expunged from index Nov 15 15:52:03 sendmail dovecot: POP3(<username>): Raw backtrace: pop3 [0x4930ab] -> pop3 [0x493123] -> pop3 [0x4927b6] -> pop3 [0x43ddd4] -> pop3 [0x43de84] -> pop3(index_mail_set_seq+0x146) [0x449c16] -> pop3 [0x43e129] -> pop3(index_storage_search_next_nonblock+0x141) [0x44d5c1] -> pop3(mailbox_search_next_nonblock+0x20) [0x45b580] -> pop3(mailbox_search_next+0x26) [0x45b5d6] -> pop3 [0x419ef9] -> pop3(client_command_execute+0x666) [0x41abd6] -> pop3(client_handle_input+0x80) [0x418f80] -> pop3(io_loop_handler_run+0xbd) [0x49b02d] -> pop3(io_loop_run+0x18) [0x49a498] -> pop3(main+0x526) [0x41b286] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x3a9b61ea2d] -> pop3 [0x418809] Nov 15 15:52:03 sendmail dovecot: dovecot: child 26792 (pop3) killed with signal 6 (core dumps disabled) I see nothing about this in the mail archives or on the internet! What could be happening and how do I fix? I'm also seeing lots of these: Nov 15 11:26:24 sendmail dovecot: POP3(<username>): Log synchronization error at seq=12646,offset=172 for /var/spool/mail/.imap/INBOX/dovecot.index: Extension introduction for unknown id 1 Nov 15 11:26:24 sendmail dovecot: POP3(<username>): fscking index file /var/spool/mail/.imap/INBOX/dovecot.index Here are the only things I messed with in dovecot.conf: protocols = pop3 mail_location = mbox:/var/spool/mail:INBOX=/var/spool/mail/%u mbox_very_dirty_syncs = yes Thanks in advance, Cliff

1 0

[Dovecot] IMAP folders' codepages problem ?
by michael＠euroinfissi.eu 14 Nov '09

14 Nov '09

Hi! I probably have a problem with the imap folders codepages. I use polish email clients such as MS Outlook and Windows Mail. The clients try to create folders like Wiadomości-Śmieci but Dovecot creates Wiadomo&AVs-ci-&AVs-mieci This happens on two different dovecot installations 1: Installation A # 1.2.6: /etc/dovecot.conf # OS: Linux 2.6.30.9-96.fc11.x86_64 x86_64 Fedora release 11 (Leonidas) info_log_path: /var/log/maillog protocols: imaps ssl_listen: * ssl: required ssl_cert_file: /etc/pki/certs/dovecot/dovecot.pem ssl_key_file: /etc/pki/certs/dovecot/dovecot_key.pem ssl_cipher_list: ALL:!ADH!LOW:!SSLv2:!EXP:+HIGH:+MEDIUM disable_plaintext_auth: yes verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login mail_privileged_group: dovecot_mail mail_debug: yes mail_plugins: autocreate quota imap_quota expire lda: postmaster_address: root@localhost auth default: passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot-sql.conf plugin: autocreate: Trash autosubscribe: Trash quota: dict:user::proxy::quota quota_rule: *:storage=1048576 quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 expire: Trash 7 INBOX 365 expire_dict: proxy::expire dict: quota: mysql:/etc/dovecot-dict-quota.conf expire: mysql:/etc/dovecot-dict-expire.conf 2: Installation B # 1.1.19: /usr/local/dovecot/etc/dovecot.conf # OS: Linux 2.6.22.14-72.fc6 x86_64 Fedora Core release 6 (Zod) base_dir: /usr/local/dovecot/var/run/dovecot/ log_path: /usr/local/dovecot/var/log/dovecot_log info_log_path: /usr/local/dovecot/var/log/dovecot_log protocols: imaps ssl_cert_file: /usr/local/ssl/certs/dovecot/certificate_04102009.crt ssl_key_file: /usr/local/ssl/certs/dovecot/privateKey_04102009.key ssl_cipher_list: ALL:!ADH!LOW:!SSLv2:!EXP:+HIGH:+MEDIUM verbose_ssl: yes login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_user: dovecot_login mail_privileged_group: dovecot_mail mail_plugins: expire quota imap_quota trash lda: postmaster_address: root@localhost hostname: filemon mail_plugins: expire quota mail_plugin_dir: /usr/local/dovecot/lib/dovecot/lda sendmail_path: /usr/sbin/sendmail auth_socket_path: /usr/local/dovecot/var/run/dovecot/auth-master auth default: mechanisms: plain login debug: yes passdb: driver: passwd-file args: /usr/local/dovecot/etc/passwd.dovecot userdb: driver: passwd-file args: /usr/local/dovecot/etc/passwd.dovecot socket: type: listen master: path: /usr/local/dovecot/var/run/dovecot/auth-master mode: 384 user: mail plugin: quota: dict:user::proxy::quotadict quota_rule: *:storage=5G:messages=2000 quota_rule2: Trash:storage=1G:messages=1000 quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 trash: /usr/local/dovecot/etc/dovecot-trash.conf expire: Trash 7 Spam 7 INBOX 180 Sent 180 auth_socket_path: /usr/local/dovecot/var/run/dovecot/auth-master expire_dict: proxy::expire dict: quotadict: mysql:/usr/local/dovecot/etc/dovecot-dict-quota.conf expire: mysql:/usr/local/dovecot/etc/dovecot-dict-expire.conf Please help :-) What should I do to have the right codes for the folder names? Best regards Michael Lattari

2 1

[Dovecot] v1.2.7 released
by Timo Sirainen 14 Nov '09

14 Nov '09

http://dovecot.org/releases/1.2/dovecot-1.2.7.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.7.tar.gz.sig * IMAP: IDLE now sends "Still here" notifications to same user's connections at the same time. This hopefully reduces power usage of some mobile clients that use multiple IDLEing connections. * IMAP: If imap_capability is set, show it in the login banner. + IMAP: Implemented SORT=DISPLAY extension. - Login process creation could have sometimes failed with epoll_ctl() errors or without epoll probably some other strange things could have happened. - Maildir: Fixed some performance issues - Maildir: Fixed crash when using a lot of keywords. - Several fixes to QRESYNC extension and modseq handling - mbox: Make sure failed saves get rolled back with NFS. - dbox: Several fixes.

3 2

[Dovecot] v1.1.20 released
by Timo Sirainen 14 Nov '09

14 Nov '09

http://dovecot.org/releases/1.1/dovecot-1.1.20.tar.gz http://dovecot.org/releases/1.1/dovecot-1.1.20.tar.gz.sig Hopefully one of the last v1.1 releases. * Upgraded to Unicode 5.2.0 - Maildir: Fixed crash when using a lot of keywords. - file_set_size() was broken with OSes that didn't support posix_fallocate() (almost everyone except Linux), causing all kinds of index file errors.

2 1