- dovecot - dovecot.org

Problem with shared after upgrade
by Yves 25 Oct '21

25 Oct '21

Hi, Old (and production) version : dovecot --version 2.1.9 New version : dovecot --version 2.3.16 (7e2e900c1a) Exactly same configuration, for shared configuration : namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = yes type = shared } But : On Old version, with my imap client (Thunderbird), I see : <account> / shared / <shared account> / INBOX <account> / shared / <shared account> / all the others folders On new version, I see : <account> / shared / <shared account> / all the others folders But not <account> / shared / <shared account> / INBOX I debug it, and seem to be OK : doveadm acl debug -u <account> shared/<shared account>/INBOX doveadm(<account>): Info: Mailbox 'INBOX' is in namespace 'shared/<shared account>/' doveadm(<account>): Info: Mailbox path: /home/dovecotmail/<shared account>/Maildir doveadm(<account>): Info: All message flags are shared across users in mailbox doveadm(<account>): Info: User <account> has rights: lookup read write write-seen write-deleted insert post expunge create delete admin doveadm(<account>): Info: Mailbox found from dovecot-acl-list doveadm(<account>): Info: User <shared account> found from ACL shared dict doveadm(<account>): Info: Mailbox shared/<shared account>/INBOX is visible in LIST And in debug log : Oct 23 12:35:01 imap(<account>)<18244><IrkoZALP4eRQfHif>: Debug: Mailbox shared/<shared account>: Rotated transaction log /home/dovecotmail/<account>/Maildir/shared/<shared account>/.INBOX/dovecot.index.log (seq=982, reset=no) Oct 23 12:35:01 imap(<account>)<18244><IrkoZALP4eRQfHif>: Debug: Mailbox shared/<shared account>: Recreated /home/dovecotmail/<account>/Maildir/shared/<shared account>/.INBOX/dovecot.index (file_seq=982) because: .log file format version 1.2 is too old Debug is ok for me ? Any idea ? Thanks

2 2

doveconf non-syntax check
by William Edwards 23 Oct '21

23 Oct '21

I use doveconf to check if my config is valid: root@unix:/etc/dovecot# doveconf <My config as stdout, as expected> root@unix:/etc/dovecot# echo $? 0 doveconf doesn't report any errors, as my config is syntactically valid. However, due to a non-syntax error, Dovecot doesn't start: root@unix:/etc/dovecot# ls /usr/local/snicerts/thisdoesntexist.key ls: cannot access '/usr/local/snicerts/thisdoesntexist.key': No such file or directory root@unix:/etc/dovecot# dovecot -F doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 4: ssl_key: Can't open file /usr/local/snicerts/thisdoesntexist.key: No such file or directory root@unix:/etc/dovecot# echo $? 89 Does Dovecot provide a config checker that checks more than just the syntax, but also issues like the one above? If not, maybe it's useful to add a 'quiet' option (i.e. no stdout) to doveconf. -- With kind regards, William Edwards

2 2

logging for doveadm replicator?
by Norman King 23 Oct '21

23 Oct '21

Hi. We have a doveadm replicator config set up to do 2 way sync of all users on our mail server. Currently running doveadm replicator status gives the following. ``` root@mail:~# doveadm replicator status Queued 'sync' requests 0 Queued 'high' requests 0 Queued 'low' requests 1 Queued 'failed' requests 0 Queued 'full resync' requests 677 Waiting 'failed' requests 4 Total number of known users 1577 ``` Is there anything i can do to get these full resyncs to happen faster? doveadm replicator dsync-status routinely shows most of the slots as not connected. Where can i start to either see logs of the replicator plugin to see if i can diagnose why it's so far behind? or is there a way to force these syncs to happen faster? Thanks. -- regards Norman King Compass Foundation sysadmin/tech support Phone, 856-974-5335 ext 221 support(a)compassfoundation.io Website <https://compassfoundation.io>

2 3

action based on IMAP ID fields
by Jörg Backschues 22 Oct '21

22 Oct '21

Hello, is it possible based on the information we get from the IMAP ID fields sent by a client to start some actions e.g. reject an IMAP client with a certain OS version? -- Kind Regards Jörg Backschues

3 2

Create a separated mailbox for archived mails
by Claudio Corvino 22 Oct '21

22 Oct '21

Hi, I have an MTA configured with Postfix that deliver email to an IMAP/LMTP Dovecot server version 2.3.4.1 configured to bind LDAP/AD for users. I would like to configure Dovecot to create another mailbox to archive mails of users to a separated NFS mount. Here is my /dovecot-ldap.conf/: [...] /ldap_version=3// //auth_bind = yes// //dn = XXX// //dnpass = XXX// //scope = subtree// //user_attrs = sAMAccountName=home=/mnt/mail-storage-dev/%$,=uid=501,=gid=501// //pass_attrs = sAMAccountName=user// //user_filter = (&(objectclass=person)(samaccountname=%n))// //pass_filter= (&(objectclass=person)(samaccountname=%n))/ [...] I think I will add another conf file, let's say /dovecot-ldap-archive.conf /using "url" as LDAP/AD filed to distinguish from normal users: [...] /ldap_version=3// //auth_bind = yes// //dn = XXX// //dnpass = XXX// //scope = subtree// //user_attrs = url=home=/mnt/mail-storage-archive/%$,=uid=501,=gid=501// //pass_attrs = url=user// //user_filter = (&(objectclass=person)(url=%n))// //pass_filter= (&(objectclass=person)(url=%n))/ [...] I then added to "test" user a "url" filed into Active Directory named /test-archive//, b/ut it's not working, when I bind Dovecot with: /doveadm user test-archive/ I receive: /field value// //userdb lookup: user test-archive doesn't exist/ With test user it works: /doveadm user test// //field value// //uid 501// //gid 501// //home /mnt/mail-storage-dev/test// //mail maildir:~/Maildir:INDEX=/var/indexes/test/ What I'm doing wrong? Thanks in advance! // -- *Claudio Corvino IT Systems Administrator*

4 10

local_name in dovecot for SNI and wildcard
by Alessio Cecchi 20 Oct '21

20 Oct '21

Hi, in dovecot configuration the options "local_name" can support wildcard domain name (es. *.mailserver.com)? This because we have a wildcard SSL certificate and I prefer to specifica a wildcard name instead of single. Is fine this? local_name *.mailserver.com { ssl_cert = </etc/dovecot/ssl/mailserver.com.pem ssl_key = </etc/dovecot/ssl/mailserver.com.key } And local_name can support multiple hostname in the same line? local_name pop.mailserver.com imap.mailserver.com { ssl_cert = </etc/dovecot/ssl/mailserver.com.pem ssl_key = </etc/dovecot/ssl/mailserver.com.key } Thanks -- Alessio Cecchi Postmaster @ http://www.qboxmail.it https://www.linkedin.com/in/alessice

2 1

dovecot-lda -> lmtp server ?
by Scott Q. 17 Oct '21

17 Oct '21

I'm stuck with using Qmail which has no LMTP support, and thus I'm using dovecot-lda which has certain drawbacks. Has anyone found a way to direct dovecot-lda to deliver the mail to the LMTP server or any other way for Qmail to deliver the mail to the LMTP server directly ? Thanks!

2 1

Broken uidlist when using NFS on newer kernels
by Jeremy Hanmer 15 Oct '21

15 Oct '21

I know this has been reported in the past, but I think I have some useful new information on the problem. After an OS upgrade from Ubuntu Xenial (4.4.0 kernel) to Ubuntu Focal (5.4.0 kernel) and corresponding upgrade from Dovecot 2.2.27 to 2.3.7.2, we've started seeing broken uidlist files to an extent that's making larger mail boxes nearly unusable because the file is constantly being regenerated. I've also used the 2.3.16-2+ubuntu20.04 version distributed from dovecot.org and the behavior is unchanged. The environment consists of NFS mounts from a NetApp device, with a couple dozen MX servers receiving mail and about a hundred IMAP/POP servers. This is the exact error (note the blank after "invalid data"): Error: Mailbox INBOX: Broken file /mnt/morty/morty2/gravest/x15775549/Maildir/dovecot-uidlist line 373: Invalid data: I've been able to trigger the problem rather easily by piping an email to dovecot-lda in a loop and reading the resulting dovecot-uidlist file on a different server. What it shows is that occasionally we're seeing the last line of the file prepended with a number of null bytes equal to the line that's being written (for example, if the entry is "35322 :1633719038.M516419P3623238.pdx1-sub0-mail-mx202,S=2777,W=2832", we'll have it prepended by 69 null bytes). This then breaks the IMAP process' ability to read the file. My first thought was to extend the retry functionality so the imap proces makes more attempts to read the file when it detects a problem like this, but would love input from someone more familiar with the codebase.

3 4

email migration of mdbox to sdbox with set index in mail_location
by filipe＠digirati.com.br 13 Oct '21

13 Oct '21

Hello, my name is Filipe I'm migrating an email server to another new server. Accounts have their storage configured as mdbox and their index being saved in another storage device. I want to migrate all messages to the new server with a new storage mode, sdbox. The new server will have storage settings set to sdbox for email accounts: In dovecot's doc it says mdbox mode is the only one that supports index storage on another device. https://doc.dovecot.org/admin_manual/mailbox_formats/dbox/#layout /"Index files can be stored in a different location by using the INDEX parameter in the mail location specification. If the INDEX parameter is specified, it will override the root mail location for index files and the "map index" file (mdbox only). "/ Even with this warning I performed the migration of some accounts as a test. running the commands from server A to server B. "Server A" conf: dovecot version: 2.2.33.2 /mail_location: mdbox:/var/spool/imap/test=x.com:INDEX=/var/lib/imap/user/test=x.com/ "Server B" conf: dovecot version: 2.3.7.2 /mail_location: sdbox:/var/spool/imap/test=x.com:INDEX=/var/lib/imap/user/test=x.com/ command executed on server A to execute message migration: /root@serverA: ~# doveadm sync -u test=x.com ssh root@*serverB* doveadm dsync-server -u test=x.com/ In the end, the message migration was successful and the access to the email account worked normally on server B. The question is whether dovecot has this support to move the index when I use the sdbox? Thank you for your help

1 0

Howto show user id for failed authentications attempts
by Jesús Ángel del Pozo 13 Oct '21

13 Oct '21

Hello, I am using dovecot_authenticator for Exim and I get a lot of authentication failure log entries, most of them due to brute force attacks. The log entries are like this: 2021-10-11 13:30:21 dovecot_login authenticator failed for ([5.188.206.194]) [5.188.206.194]: 535 Incorrect authentication data I wonder whether it would be possible to show the user ID the attacker used to authenticate himself. Here it is the SMTP data for one of these SMTP sessions: SMTP>> 250-disguised.domain.com Hello [5.188.206.194] [5.188.206.194] SMTP<< AUTH LOGIN SMTP>> 334 VXNlcm5hbWU6 received: CONT 1 UGFzc3dvcmQ6 SMTP>> 334 UGFzc3dvcmQ6 received: FAIL 1 user=webmaster(a)somedomain.net SMTP>> 535 Incorrect authentication data LOG: MAIN REJECT dovecot_login authenticator failed for ([5.188.206.194]) [5.188.206.194]: 535 Incorrect authentication data SMTP>> 421 disguised.domain.com lost input connection Warm regards, Jesús Ángel.

1 1

stats events for use with prometheus
by Marc 12 Oct '21

12 Oct '21

I am struggling a bit with getting some basic metrics into prometheus. Is there some sample metrics file that has most common metrics configured? [@ conf.d]# cat 05-metrics.conf # https://doc.dovecot.org/admin_manual/event_design/#event-design metric imap_command { filter = event=imap_command_finished group_by = cmd_name tagged_reply_state }

3 7

Containerize dovecot?
by MRob 12 Oct '21

12 Oct '21

Hello, anyone here has containerized dovecot? Can I ask general advice and experience please? are there any recommended articles/tutorial for containerize deploymnt and auto-scaling? Thank you.

9 12

Dovecot-2.3.15 ignores imaps inet_listener
by David Favor 12 Oct '21

12 Oct '21

Processes that show up, only imap, no imaps... # service dovecot restart && netstat -pluten | egrep dovecot tcp 0 0 51.222.96.234:143 0.0.0.0:* LISTEN 0 3017752730 285711/dovecot Someone let me know what I've done wrong. Thanks! Changing conf.d/10-ssl.conf ssl=yes seems to have no effect, thus ssl=no shows up in the config, so maybe that's the problem. Data follows... _______ # dovecot -n -c /etc/dovecot/dovecot.conf # 2.3.15 (0503334ab1): /etc/dovecot/dovecot.conf # OS: Linux 5.4.0-56-generic x86_64 Ubuntu 20.04.3 LTS # Hostname: net15-david-favor-mail mail_location = mbox:~/mail:INBOX=/var/mail/%u namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } protocols = " imap lmtp" service imap-login { inet_listener imap { address = 51.222.96.234 port = 143 } inet_listener imaps { address = 51.222.96.234 port = 993 ssl = yes } } ssl = no userdb { driver = passwd }

1 0

two different mail_location
by Gabx 12 Oct '21

12 Oct '21

Hi everybody, my mail system has all users in usual path ~ . Only one user is in /var/%u . This user doesn't receive emails. I guess it is because its $HOME is on a different path than the one specified in dovecot mail_location which is: > mail_location = maildir:~/%u/Maildir What's the best way to solve this issue ? Namespaces ? If so could someone explain me how ? Best Regards Gabriel -- GPG fingerprint: 5A6A F742 ACEA C9A7 93A8 8D5E 7AEF 5A02 D080 89F7 Contact: xmpp://gabx@jabber.tcpreset.net

2 4

Dovecot Replica one user at a time
by Claudio Corvino 12 Oct '21

12 Oct '21

Hi all, I have two IMAP/LMTP Dovecot server in replica (version 2.3.4.1) for testing purposes, both connected through an IPsec tunnel, I use LDAP/AD for /userdb, /all seems to work fine. Now I would like to go in production where at the moment I have only one server active and setup the replica too ... but! I need to know how I can exclude all the users from replication (help/examples appreciated!) and doing replication one user at a time, in order to not saturate bandwidth on the IPsec tunnel. I read https://wiki.dovecot.org/Replication: "Since v2.3.1 you can disable replication for a user by providing 'noreplicate' user database field <https://wiki.dovecot.org/UserDatabase/ExtraFields>. Another way to disable replication for some users is to return mail_replica field from userdb for users you want to replicate." but I can't figure out how to do it. One last question: since I have to deal with huge mailboxes, if prior to activate replication I do an rsync between the two Dovecot filesystems, does the replication will work? Thanks in advance! Cheers -- *Claudio Corvino IT Systems Administrator*

2 3

Authentication problems due to file ownership issue.
by C. Petro 12 Oct '21

12 Oct '21

I am getting: Oct 03 20:19:52 auth: Error: net_connect_unix(auth-worker) in directory /run/dovecot failed: Permission denied (euid=5000(vmail) egid=5000(vmail) missing +r perm: /run/dovecot/auth-worker, dir owned by 0:0 mode=0755) Because: root@mailserver:/run/dovecot# ls -l auth-worker srw------- 1 dovecot root 0 Oct 3 20:09 auth-worker When it really needs to be "vmail" (I think). I have set: service auth-worker { # Auth worker process is run as root by default, so that it can access # /etc/shadow. If this isn't necessary, the user should be changed to # $default_internal_user. user = vmail group = vmail } in 10-master.conf (because I'm using postfixadmin/mariadb to store user information, I don't *want* access to /etc/shadow) I set this about an hour ago, then applied some security patches and restarted (ubuntu 20.04 system) and it didn't change. I then manually did a "chown vmail: of that file, and I got further. I had a different problem that I resolved, and then restarted dovecot, and /run/dovecot/auth-worker reverted. I'm not sure where I need to set this. Thanks. Petro. :wq

2 2

haproxy config manual update for multiple ports
by Marc 09 Oct '21

09 Oct '21

https://wiki2.dovecot.org/HAProxy Maybe update this to having multiple ports (if this is even possible) frontend ft_imap bind :110 << bind :143 mode tcp default_backend bk_imap backend bk_imap mode tcp balance leastconn stick store-request src stick-table type ip size 200k expire 30m server s1 backend.example.com:10143 send-proxy-v2 <<< how to put more ports here?

3 7

SNI via lookup?
by Felipe Gasper 08 Oct '21

08 Oct '21

Hello, How (if at all) might I configure a Dovecot server to read its SNI configuration dynamically? Right now I’ve got thousands of domains all served from a quite-large static config file that has to be rebuilt every time a domain is added or removed. It would be much simpler if there were a way to make Dovecot call out to some external service to fetch a given domain’s certificate. Thank you in advance! cheers, -Felipe Gasper

3 5

writing Maildir subscriptions file outside of dovecot
by David Mandelberg 08 Oct '21

08 Oct '21

Hi, Is it safe to write to the Maildir subscriptions file directly? I'm trying to figure out a way to make sure the subscriptions match the actual folders exactly. I know how to subscribe to existing mailboxes with `doveadm mailbox list` and `doveadm mailbox subscribe`, but the latter seems to only accept mailboxes on the command line, and any local user can see the command line of any other user's commands. Also, that doesn't handle unsubscribing from non-existent mailboxes. I think unsubscribing from any mailboxes listed in `doveadm mailbox list -s` but not in `doveadm mailbox list` would work, but it has the same issue of mailboxes on the command line. It looks like I could do what I want with something like this command, but I'm not sure if it's safe to write directly to the subscriptions file: { echo INBOX; ls -1A | grep '^\.' | cut -c 2-; } > subscriptions (I was also thinking about using `doveadm mailbox list` to write the subscriptions file directly, but it looks like they use different separators and encodings.)

2 2

reconsidering my (your?) current setup
by Marc 07 Oct '21

07 Oct '21

With redhat 'dumping' the support for centos and the availability of containers. I thought about reconsidering my default dovecot setup. Since the concept of having a lts distribution that is supported by redhat/centos is more or less 'unavailable'. I thought about using the repo of dovecot with centos8stream. os == For now I stick with centos8stream, just because the rest is still on centos7 support and the ceph development team is using it as a default. (And can't yet let go of the idea this closest to professional distro ;)) auth uid gid os =============== I am not really convinced that storing users in mysql/postgres is a better alternative than having linux do auth. I also think it is good to have mailbox files stored with different uid's (no idea if this is even the case when dovecot is using mysql/maria/postgres) Normally I would use a synced ldap server on the vm for authentication. But I was thinking of using now an external ldap task from the container environment. To de-duplicate services/data and make the environment simple. Since rh is moving to a different ldap server, it would be good to have this seperated in the future. New to me is the sssd, used nscd/nslcd for decades without issues. I guess the best solution is to have the os uid/gid coming from sssd, configure sssd to have a huge timeout if the backend ldap auth is not available. What is your thought about this? auth uid gid dovecot ==================== I do not really have an idea if I should have dovecot use ldap directly or use this sssd pam? The advantage of using ldap directly is you could maybe skip identifying users in the os. But maybe then tools like dovadm that require a user are not working anymore. From the keep it simple perspective it is probably better to use sssd. However centos8stream and sssd are not really known to me. So any ideas/advice about this?

7 7

strange cache behavior
by Maciej Milaszewski 07 Oct '21

07 Oct '21

Hi I Migrate user from ldap to mysql (director+nodes) (2.2.36.4) All works fine but when I turn on debbug auth I get "cache differences " look: dovecot6 (lmysql)run: #doveadm user mx8(a)domain.ltd field value user domain.ltd_mx8 uid 300 gid 300 home /vmail2/na/domain.ltd_mx8 mail maildir:~/Maildir:INDEX=/var/dovecot_indexes/vmail2/na/domain.ltd_mx8 quota_rule *:bytes=10485760 In second time (via cache) I get: #doveadm user mx8(a)domain.ltd field value uid 300 gid 300 home /vmail2/na/domain.ltd_mx8 mail maildir:~/Maildir:INDEX=/var/dovecot_indexes/vmail2/na/domain.ltd_mx8 quota_rule *:bytes=10485760 cache not give me "user domain.ltd_mx8" value In ldap every time I get this same I try debbug and i found difference in 2 and 3 line: mysql: Oct 7 16:42:04 dovecot6 dovecot: auth: Debug: master in: USER#0111#011mx8(a)domain.ltd#011service=doveadm#011debug Oct 7 16:42:04 dovecot6 dovecot: auth: Debug: sql(mx8(a)natan-test.iq.pl): userdb cache hit: home=/vmail2/na/domain.ltd_mx8#011quota_rule=*:bytes=10485760 Oct 7 16:42:04 dovecot6 dovecot: auth: Debug: userdb out: USER#0111#011mx8@domain.ltd#011home=/vmail2/na/natan-test.iq.pl_mx8_natan-test#011quota_rule=*:bytes=10485760 in ldap: Oct 7 16:45:31 dovecot5 dovecot: auth: Debug: master in: USER#0111#011mx8(a)domain.ltd#011service=doveadm#011debug Oct 7 16:45:31 dovecot5 dovecot: auth: Debug: ldap(mx8(a)natan-test.iq.pl): userdb cache hit: home=/vmail2/na/domain.ltd_mx8#011quota_rule=*:bytes=10485760#011user=domain.ltd_mx8 Oct 7 16:45:31 dovecot5 dovecot: auth: Debug: ldap(mx8(a)natan-test.iq.pl): username changed mx8(a)domain.ltd-> domain.ltd_mx8 Oct 7 16:45:31 dovecot5 dovecot: auth: Debug: userdb out: USER#0111#011domain.ltd_mx8#011home=/vmail2/na/natan-test.iq.pl_mx8_natan-test#011quota_rule=*:bytes=10485760 first query witchout cache: ldap Oct 7 16:45:21 dovecot5 dovecot: auth: Debug: userdb out: USER#0111#011domain.ltd_mx8#011home=/vmail2/na/domain.ltd_mx8#011quota_rule=*:bytes=10485760 mysql Oct 7 16:41:34 dovecot6 dovecot: auth: Debug: userdb out: USER#0111#011domain.ltd_mx8#011home=/vmail2/na/domain.ltd_mx8#011quota_rule=*:bytes=10485760 And I dont known where is a problem ? maybe in the cache setting ? All dovecot hava this sam config (outside of the settings about auth query)

1 0

Re: Quota emails... nothing happened
by Stephane Magnier 07 Oct '21

07 Oct '21

Hi, sorry to bother you.. any idea ? how to give more space to a specific user ? And where to place the line, in order to overide the general rule ? I suspect that to increase the space for the specific user AZT000, that should be : quota_rule=azt000:storage=160gb.. but where Thanks and regards, Le 06/10/2021 à 15:49, Stephane Magnier a écrit : > not exactly.. > > Usernames are : azt000, azt001, azt002, etc..... > All of them have their mailbox in /var/spool2/mail/azt000, > /var/spool2/mail/azt001 ) > > Everybody will get 30Gb by default > Except the user *azt000*, who will have 160Gb > > So, I understand, that the general rule is this > > > plugin { > quota = maildir:User quota > quota_rule = *:storage=30GB > quota_rule2 = Trash:storage=+100MB > quota_rule3 = Spam:storage=+20%% > } > > > Now, I suppose , to specify the user *azt000 and only this one*, to > get a quota of 160Gb, I should write something like: > *quota_rule=azt000:storage=+160Gb *correct ?* > * > but where ! > > 1) If I had this sentence into_the plugin_ ( as it was before ) , it's > not considered. Every body stays with the general 30Gb allocated in my > example > 2) My understanding is, according to the link you sent to me, I have > to write this specific condition :***quota_rule=azt000:storage=+160Gb* > _Outside_ the plugin.. I've made different tests and all of them are > not working.. The Dovecot doesn't start > > I also tried this > > userdb { > driver = passwd > args = /etc/dovecot/quota-overrides > quota_rule=azt000:storage=+160Gb > result_success=continue-ok > } > > I would like to keep 30gb for any user AZTxxx, But for some specific > users ( like AZT000), I wish to adapt the quota limit > > sorry to bother with that. I hope not to be too much pain in the neck..:-) > Thanks !! > * > * > Le 06/10/2021 à 14:51, Aki Tuomi a écrit : >> No. The syntax is not correct. >> >> https://doc.dovecot.org/configuration_manual/quota/#quota-rules >> >> this says that the rule is: >> >> quota_rule = <mailbox name>:<limit configuration> >> >> so unless you want 160GB quota for mailbox folder `azt000` (not username), you want to use * here. >> >> Aki >> >>> On 06/10/2021 15:36 Stephane Magnier<steph.mag220(a)netcourrier.com> wrote: >>> >>> >>> OK, but is the syntax correct ? >>> >>> Should it be :azt000:quota_rule4=+160GB ? >>> Is that correct ? >>> >>> Because I've made the test.. It didn't "shoot at me" while restarting the service, it apparently accept the syntax, but the result is still wrong.. >>> It is still considering a limit of 30gb and not 160Gb >>> ( the line : quota_rule = *:storage=30GB ) >>> >>> To sum up , I have >>> >>> >>>> plugin { >>>> quota = maildir:User quota >>>> quota_rule = *:storage=30GB >>>> quota_rule2 = Trash:storage=+100MB >>>> quota_rule3 = Spam:storage=+20%% >>>> azt000:quota_rule4=+160GB >>>> >>>> >>>> quota_status_success = DUNNO >>>> quota_status_nouser = DUNNO >>>> quota_status_overquota = "552 5.2.2 Mailbox is full" >>>> quota_warning = storage=95%% quota-warning 95 %u >>>> quota_warning2 = storage=80%% quota-warning 80 %u >>>> quota_warning3 = storage=100%% quota-warning below %u >>>> quota_grace = 10%% >>>> >>>> # Quota plugin can also limit the maximum accepted mail size. >>>> quota_max_mail_size = 100M >>>> } >>>> >>> and >>> >>> >>>> userdb { >>>> driver = passwd >>>> args = /etc/dovecot/quota-overrides >>>> result_success=continue-ok >>>> } >>>> >>> but >>> >>> >>>> [root@mbox1 conf.d]# service dovecot restart >>>> Redirecting to /bin/systemctl restart dovecot.service >>>> [root@mbox1 conf.d]# doveadm quota get -u azt000 >>>> Quota name Type Value Limit % >>>> User quota STORAGE 22268406 31457280 70 >>>> User quota MESSAGE 29853 - 0 >>>> [root@mbox1 conf.d]# >>>> >>> >>> With 70% ; it's considering the 30Gb and not the 160Gb ( the AZT000 folder size is about 21Gb ) >>> >>> >>> >>> Le 06/10/2021 à 14:08, Aki Tuomi a écrit : >>> >>>> The rules must be consecutive, >>>> >>>> if your global config has >>>> >>>> quota_rule1 >>>> quota_rule2 >>>> >>>> then the userdb must return >>>> >>>> quota_rule3. Or it will overwrite an existing rule. >>>> >>>> Aki >>>> >>>> >>>> >>>>> On 06/10/2021 13:07 Stephane Magnier<steph.mag220(a)netcourrier.com> wrote: >>>>> >>>>> >>>>> Hi, >>>>> >>>>> OK, I wrote this : >>>>> >>>>> >>>>> >>>>>> userdb { >>>>>> driver = passwd >>>>>> args = /etc/dovecot/quota-overrides >>>>>> >>>>>> result_success=continue-ok >>>>>> >>>>>> # Override fields from passwd >>>>>> #override_fields = home=/home/virtual/%u >>>>>> } >>>>>> >>>>>> >>>>> but sorry I don't understand the following line >>>>> >>>>> username::::::::::quota_ruleX=... where X is the next rule number. >>>>> >>>>> What should I write ?...... for instance : ? something like that ?? >>>>> >>>>> >>>>> >>>>> >>>>> Le 06/10/2021 à 10:13, Aki Tuomi a écrit : >>>>> >>>>> >>>>>> That `*` there is actually mailbox mask. You have to return an additional quota_ruleN from your userdb for that user. >>>>>> >>>>>> You can do e.g. >>>>>> >>>>>> userdb { >>>>>> .. >>>>>> result_success=continue-ok} >>>>>> } >>>>>> >>>>>> userdb { >>>>>> driver = passwd >>>>>> args = /etc/dovecot/quota-overrides >>>>>> } >>>>>> >>>>>> and put in there >>>>>> >>>>>> username::::::::::quota_ruleX=... where X is the next rule number. >>>>>> >>>>>> the count of : might be wrong. >>>>>> >>>>>> Aki >>>>>> >>>>>> >>>>>> >>>>>>> On 06/10/2021 10:43 Stephane Magnier<steph.mag220(a)netcourrier.com> wrote: >>>>>>> >>>>>>> >>>>>>> Hi Again, >>>>>>> >>>>>>> Juste another one... >>>>>>> >>>>>>> The quota I've decided is 30Gb for everybody >>>>>>> I would like to add an exception for the user AZT000 so here is my test : >>>>>>> >>>>>>> I put 60 GB for AZT000, but apparently, this is not seen :-( No error message >>>>>>> Is there a general syntax for a specific user ? >>>>>>> >>>>>>> NB: I tried : >>>>>>> quota_rule = azt000:storage=+60GB orquota_rule1 = azt000:storage=+60GB same results >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> plugin { >>>>>>>> quota = maildir:User quota >>>>>>>> quota_rule = *:storage=30GB >>>>>>>> quota_rule2 = Trash:storage=+100MB >>>>>>>> quota_rule3 = Spam:storage=+20%% >>>>>>>> # quota_rule = *:storage=70GB >>>>>>>> # quota_rule = *:storage=70GB >>>>>>>> quota_rule = azt000:storage=+60GB >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> Le 06/10/2021 à 08:09, Stephane Magnier a écrit : >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Great !! works fine.. >>>>>>>> >>>>>>>> I had in fact, twice the same déclaration of quotat and storage on the same file..... one of them was with an upper case "S" for Storage.. >>>>>>>> >>>>>>>> Thanks again >>>>>>>> >>>>>>>> >>>>>>>> Le 06/10/2021 à 07:50, Aki Tuomi a écrit : >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>>>> On 06/10/2021 08:38 Stephane Magnier<steph.mag220(a)netcourrier.com> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Le 06/10/2021 à 06:51, Aki Tuomi a écrit : >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>>> On 06/10/2021 07:30 Stephane Magnier<steph.mag220(a)netcourrier.com> wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Le 06/10/2021 à 06:10, Stephane Magnier a écrit : >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> Hi, >>>>>>>>>>>>> I am just running Dovecot v 2.3.8 .. seems to work fine. >>>>>>>>>>>>> I just add the quota plugin.. and.. I cannot see any differences.. I cannot see any information on Quota per user.. No specific info on Log file :-( >>>>>>>>>>>>> >>>>>>>>>>>>> Any help please ? >>>>>>>>>>>>> >>>>>>>>>>>>> Tahnks for your help >>>>>>>>>>>>> >>>>>>>>>>>>> Here is my config : >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> # 2.3.8 (9df20d2db): /etc/dovecot/dovecot.conf >>>>>>>>>>>>> # Pigeonhole version 0.5.8 (b7b03ba2) >>>>>>>>>>>>> # OS: Linux 4.18.0-305.12.1.el8_4.x86_64 x86_64 CentOS Linux release 8.4.2105 nfs4 >>>>>>>>>>>>> # Hostname: mbox1.intranet.office.itx >>>>>>>>>>>>> auth_cache_negative_ttl = 5 mins >>>>>>>>>>>>> auth_cache_ttl = 5 mins >>>>>>>>>>>>> auth_mechanisms = plain login >>>>>>>>>>>>> auth_username_format = %u >>>>>>>>>>>>> debug_log_path = /var/log/dovecot-debug.log >>>>>>>>>>>>> default_vsz_limit = 4 G >>>>>>>>>>>>> info_log_path = /var/log/dovecot-info.log >>>>>>>>>>>>> listen = * [::] >>>>>>>>>>>>> log_path = /var/log/dovecot.log >>>>>>>>>>>>> login_trusted_networks = 172.18.0.0/16 127.0.0.1 ::1 >>>>>>>>>>>>> mail_access_groups = dovecot >>>>>>>>>>>>> mail_fsync = always >>>>>>>>>>>>> mail_location = maildir:/var/spool2/mail/%u:LAYOUT=fs >>>>>>>>>>>>> mail_nfs_storage = yes >>>>>>>>>>>>> mail_plugins = " quota" >>>>>>>>>>>>> mail_privileged_group = mail >>>>>>>>>>>>> managesieve_notify_capability = mailto >>>>>>>>>>>>> managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave >>>>>>>>>>>>> mbox_very_dirty_syncs = yes >>>>>>>>>>>>> mbox_write_locks = fcntl >>>>>>>>>>>>> mmap_disable = yes >>>>>>>>>>>>> namespace inbox { >>>>>>>>>>>>> disabled = no >>>>>>>>>>>>> ignore_on_failure = no >>>>>>>>>>>>> inbox = yes >>>>>>>>>>>>> list = yes >>>>>>>>>>>>> location = >>>>>>>>>>>>> mailbox Archive { >>>>>>>>>>>>> auto = no >>>>>>>>>>>>> comment = " All my Accepted/NON SPAM" >>>>>>>>>>>>> special_use = \Archive >>>>>>>>>>>>> } >>>>>>>>>>>>> mailbox Drafts { >>>>>>>>>>>>> auto = subscribe >>>>>>>>>>>>> special_use = \Drafts >>>>>>>>>>>>> } >>>>>>>>>>>>> mailbox Junk { >>>>>>>>>>>>> auto = subscribe >>>>>>>>>>>>> autoexpunge = 90 days >>>>>>>>>>>>> special_use = \Junk >>>>>>>>>>>>> } >>>>>>>>>>>>> mailbox Sent { >>>>>>>>>>>>> auto = subscribe >>>>>>>>>>>>> special_use = \Sent >>>>>>>>>>>>> } >>>>>>>>>>>>> mailbox Trash { >>>>>>>>>>>>> auto = no >>>>>>>>>>>>> autoexpunge = 60 days >>>>>>>>>>>>> special_use = \Trash >>>>>>>>>>>>> } >>>>>>>>>>>>> mailbox virtual/All { >>>>>>>>>>>>> auto = no >>>>>>>>>>>>> special_use = \All >>>>>>>>>>>>> } >>>>>>>>>>>>> prefix = >>>>>>>>>>>>> subscriptions = yes >>>>>>>>>>>>> type = private >>>>>>>>>>>>> } >>>>>>>>>>>>> passdb { >>>>>>>>>>>>> driver = pam >>>>>>>>>>>>> } >>>>>>>>>>>>> plugin { >>>>>>>>>>>>> quota_grace = 10%% >>>>>>>>>>>>> quota_max_mail_size = 100M >>>>>>>>>>>>> quota_rule = *:storage=10000M >>>>>>>>>>>>> quota_rule2 = Trash:Storage=+100M >>>>>>>>>>>>> quota_rule3 = Spam:storage=+20%% >>>>>>>>>>>>> quota_status_nouser = DUNNO >>>>>>>>>>>>> quota_status_overquota = 552 5.2.2 Mailbox is full >>>>>>>>>>>>> quota_status_success = DUNNO >>>>>>>>>>>>> quota_warning = storage=95%% quota-warning 95 %u >>>>>>>>>>>>> quota_warning2 = storage=80%% quota-warning 80 %u >>>>>>>>>>>>> quota_warning3 = -storage=100%% quota-warning below %u >>>>>>>>>>>>> sieve =file:~/sieve;active=~/.dovecot.sieve >>>>>>>>>>>>> } >>>>>>>>>>>>> pop3_uidl_format = %v-%u >>>>>>>>>>>>> service auth { >>>>>>>>>>>>> unix_listener auth-master { >>>>>>>>>>>>> mode = 0666 >>>>>>>>>>>>> } >>>>>>>>>>>>> unix_listener auth-userdb { >>>>>>>>>>>>> mode = 0600 >>>>>>>>>>>>> user = mail >>>>>>>>>>>>> } >>>>>>>>>>>>> } >>>>>>>>>>>>> service dict { >>>>>>>>>>>>> unix_listener dict { >>>>>>>>>>>>> mode = 0600 >>>>>>>>>>>>> user = mail >>>>>>>>>>>>> } >>>>>>>>>>>>> } >>>>>>>>>>>>> service imap-login { >>>>>>>>>>>>> inet_listener imap { >>>>>>>>>>>>> port = 143 >>>>>>>>>>>>> } >>>>>>>>>>>>> inet_listener imaps { >>>>>>>>>>>>> port = 993 >>>>>>>>>>>>> ssl = yes >>>>>>>>>>>>> } >>>>>>>>>>>>> process_min_avail = 4 >>>>>>>>>>>>> service_count = 0 >>>>>>>>>>>>> } >>>>>>>>>>>>> service lmtp { >>>>>>>>>>>>> inet_listener lmtp { >>>>>>>>>>>>> port = 24 >>>>>>>>>>>>> } >>>>>>>>>>>>> unix_listener /var/run/lmtp { >>>>>>>>>>>>> group = mail >>>>>>>>>>>>> mode = 0660 >>>>>>>>>>>>> user = mail >>>>>>>>>>>>> } >>>>>>>>>>>>> } >>>>>>>>>>>>> service pop3-login { >>>>>>>>>>>>> inet_listener pop3 { >>>>>>>>>>>>> address = * >>>>>>>>>>>>> port = 110 >>>>>>>>>>>>> } >>>>>>>>>>>>> inet_listener pop3s { >>>>>>>>>>>>> port = 995 >>>>>>>>>>>>> ssl = yes >>>>>>>>>>>>> } >>>>>>>>>>>>> } >>>>>>>>>>>>> service quota-warning { >>>>>>>>>>>>> executable = script /usr/local/bin/quota-warning.sh >>>>>>>>>>>>> unix_listener quota-warning { >>>>>>>>>>>>> user = mail >>>>>>>>>>>>> } >>>>>>>>>>>>> user = dovecot >>>>>>>>>>>>> } >>>>>>>>>>>>> service submission { >>>>>>>>>>>>> process_limit = 250 >>>>>>>>>>>>> } >>>>>>>>>>>>> ssl = required >>>>>>>>>>>>> ssl_ca = </etc/mail/ssl/ssl1/xxxxxp_net.ca-bundle >>>>>>>>>>>>> ssl_cert = </etc/mail/ssl/ssl1/xxxxxx_net.crt >>>>>>>>>>>>> ssl_cipher_list = HIGH:!aNULL:!ADH:!DH:!RC4:!MD5:!RSA >>>>>>>>>>>>> ssl_dh = # hidden, use -P to show it >>>>>>>>>>>>> ssl_key = # hidden, use -P to show it >>>>>>>>>>>>> userdb { >>>>>>>>>>>>> driver = passwd >>>>>>>>>>>>> } >>>>>>>>>>>>> verbose_proctitle = yes >>>>>>>>>>>>> protocol lmtp { >>>>>>>>>>>>> mail_fsync = optimized >>>>>>>>>>>>> mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify sieve >>>>>>>>>>>>> postmaster_address =it(a)intranet.office.itx >>>>>>>>>>>>> } >>>>>>>>>>>>> protocol lda { >>>>>>>>>>>>> mail_fsync = optimized >>>>>>>>>>>>> mail_plugins = " quota sieve quota" >>>>>>>>>>>>> } >>>>>>>>>>>>> protocol imap { >>>>>>>>>>>>> mail_max_userip_connections = 80 >>>>>>>>>>>>> mail_plugins = " quota quota imap_quota" >>>>>>>>>>>>> ssl_cert = </etc/mail/ssl/ssl1/STAR_aztgrp_net.crt >>>>>>>>>>>>> ssl_key = # hidden, use -P to show it >>>>>>>>>>>>> } >>>>>>>>>>>>> protocol pop3 { >>>>>>>>>>>>> mail_max_userip_connections = 10 >>>>>>>>>>>>> mail_plugins = " quota" >>>>>>>>>>>>> } >>>>>>>>>>>>> protocol submission { >>>>>>>>>>>>> mail_max_userip_connections = 10 >>>>>>>>>>>>> mail_plugins = " quota" >>>>>>>>>>>>> } >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> Just for info >>>>>>>>>>>> >>>>>>>>>>>> [root@mbox1 xenia]# doveadm quota get -A |grep "STORAGE" >>>>>>>>>>>> Nothing at all ?? weird >>>>>>>>>>>> [root@mbox1 xenia]# >>>>>>>>>>>> >>>>>>>>>>>> [root@mbox1 xenia]# doveadm quota get -u <user1> >>>>>>>>>>>> Quota name Type Value Limit % >>>>>>>>>>>> [root@mbox1 xenia]# >>>>>>>>>>>> => Absolutely nothing is displayed ???? >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> normally, the size of the user1 email folder is about 21 Gb >>>>>>>>>>>> So..just modified the line :quota_rule = *:storage=100G >>>>>>>>>>>> But nothing has changed... >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> You are missing quota driver settings, the recommended settings are >>>>>>>>>>> >>>>>>>>>>> plugin { >>>>>>>>>>> quota = count >>>>>>>>>>> quota_vsizes = yes >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> Aki >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> Hi Aki, >>>>>>>>>> Thanks for your reply.. >>>>>>>>>> >>>>>>>>>> I just tryed to ad it.. but this can't connect anymore . >>>>>>>>>> Here is my exact declaration "90-quota.conf" >>>>>>>>>> >>>>>>>>>> ( based on :https://doc.dovecot.org/configuration_manual/quota/ ) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> plugin { >>>>>>>>>>> quota = count >>>>>>>>>>> quota_vsizes = yes >>>>>>>>>>> #quota = maildir:User quota >>>>>>>>>>> quota_rule = *:storage=100GB >>>>>>>>>>> # quota_rule2 = Trash:storage=+100MB >>>>>>>>>>> # quota_rule3 = Spam:storage=+20%% >>>>>>>>>>> # 20% of 100GB = 20GB >>>>>>>>>>> quota_status_success = DUNNO >>>>>>>>>>> quota_status_nouser = DUNNO >>>>>>>>>>> quota_status_overquota = "552 5.2.2 Mailbox is full" >>>>>>>>>>> quota_warning = storage=95%% quota-warning 95 %u >>>>>>>>>>> quota_warning2 = storage=80%% quota-warning 80 %u >>>>>>>>>>> quota_warning3 = -storage=100%% quota-warning below %u >>>>>>>>>>> >>>>>>>>>>> # LDA/LMTP allows saving the last mail to bring user from under quota to >>>>>>>>>>> # over quota, if the quota doesn't grow too high. Default is to allow as >>>>>>>>>>> # long as quota will stay under 10% above the limit. Also allowed e.g. 10M. >>>>>>>>>>> quota_grace = 10%% >>>>>>>>>>> >>>>>>>>>>> # Quota plugin can also limit the maximum accepted mail size. >>>>>>>>>>> quota_max_mail_size = 100M >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> The error message I have now is : >>>>>>>>>> >>>>>>>>>> Oct 06 07:23:35 imap(azt000)<7381><3pAIWajNgdcgAUHQ/kJ8Aikr1PIAQmFL>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage >>>>>>>>>> Oct 06 07:23:35 imap(azt000)<7382><jqwJWajNgtcgAUHQ/kJ8Aikr1PIAQmFL>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage >>>>>>>>>> Oct 06 07:26:02 master: Warning: Killed with signal 15 (by pid=8420 uid=0 code=kill) >>>>>>>>>> Oct 06 07:26:10 imap(azt000)<8468><cDRLYqjNcsSsEgA3>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage >>>>>>>>>> Oct 06 07:26:13 imap(azt000)<8469><mxN6YqjNdMSsEgA3>: Error: Failed to initialize quota: Invalid quota root quota: Invalid rule Trash:Storage=+100M: Unknown rule limit name: Storage >>>>>>>>>> >>>>>>>>>> Then you can see that I've removed the 2 lines >>>>>>>>>> # quota_rule2 = Trash:storage=+100MB >>>>>>>>>> # quota_rule3 = Spam:storage=+20%% >>>>>>>>>> >>>>>>>>>> but without any success >>>>>>>>>> >>>>>>>>>> Effectively.. what is the Word "Storage" for Dovecot ?? no idea ... I just wrote what I saw :-) >>>>>>>>>> >>>>>>>>>> For info : all the mailbox are placed on a NFS storage.. Don't know if this help to locate the problem.. >>>>>>>>>> Thanks and regards, >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> Did you try changing Storage => storage in your rule? It seems to be coming either from userdb or your config. >>>>>>>>> >>>>>>>>> Try `doveadm user azt000` to if your userdb is providing these rules. >>>>>>>>> >>>>>>>>> Aki >>>>>>>>> >>>>>>>>> >>>>>>>>> >

2 1

Quota emails... nothing happened
by Stephane Magnier 06 Oct '21

06 Oct '21

Hi, I am just running Dovecot v 2.3.8 .. seems to work fine. I just add the quota plugin.. and.. I cannot see any differences.. I cannot see any information on Quota per user.. No specific info on Log file :-( Any help please ? Tahnks for your help Here is my config : # 2.3.8 (9df20d2db): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.8 (b7b03ba2) # OS: Linux 4.18.0-305.12.1.el8_4.x86_64 x86_64 CentOS Linux release 8.4.2105 nfs4 # Hostname: mbox1.intranet.office.itx auth_cache_negative_ttl = 5 mins auth_cache_ttl = 5 mins auth_mechanisms = plain login auth_username_format = %u debug_log_path = /var/log/dovecot-debug.log default_vsz_limit = 4 G info_log_path = /var/log/dovecot-info.log listen = * [::] log_path = /var/log/dovecot.log login_trusted_networks = 172.18.0.0/16 127.0.0.1 ::1 mail_access_groups = dovecot mail_fsync = always mail_location = maildir:/var/spool2/mail/%u:LAYOUT=fs mail_nfs_storage = yes mail_plugins = " quota" mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_very_dirty_syncs = yes mbox_write_locks = fcntl mmap_disable = yes namespace inbox { disabled = no ignore_on_failure = no inbox = yes list = yes location = mailbox Archive { auto = no comment = " All my Accepted/NON SPAM" special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe autoexpunge = 90 days special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = no autoexpunge = 60 days special_use = \Trash } mailbox virtual/All { auto = no special_use = \All } prefix = subscriptions = yes type = private } passdb { driver = pam } plugin { quota_grace = 10%% quota_max_mail_size = 100M quota_rule = *:storage=10000M quota_rule2 = Trash:Storage=+100M quota_rule3 = Spam:storage=+20%% quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = -storage=100%% quota-warning below %u sieve = file:~/sieve;active=~/.dovecot.sieve } pop3_uidl_format = %v-%u service auth { unix_listener auth-master { mode = 0666 } unix_listener auth-userdb { mode = 0600 user = mail } } service dict { unix_listener dict { mode = 0600 user = mail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 4 service_count = 0 } service lmtp { inet_listener lmtp { port = 24 } unix_listener /var/run/lmtp { group = mail mode = 0660 user = mail } } service pop3-login { inet_listener pop3 { address = * port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = mail } user = dovecot } service submission { process_limit = 250 } ssl = required ssl_ca = </etc/mail/ssl/ssl1/xxxxxp_net.ca-bundle ssl_cert = </etc/mail/ssl/ssl1/xxxxxx_net.crt ssl_cipher_list = HIGH:!aNULL:!ADH:!DH:!RC4:!MD5:!RSA ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { driver = passwd } verbose_proctitle = yes protocol lmtp { mail_fsync = optimized mail_plugins = autocreate quota acl fts fts_solr zlib mail_log notify sieve postmaster_address = it(a)intranet.office.itx } protocol lda { mail_fsync = optimized mail_plugins = " quota sieve quota" } protocol imap { mail_max_userip_connections = 80 mail_plugins = " quota quota imap_quota" ssl_cert = </etc/mail/ssl/ssl1/STAR_aztgrp_net.crt ssl_key = # hidden, use -P to show it } protocol pop3 { mail_max_userip_connections = 10 mail_plugins = " quota" } protocol submission { mail_max_userip_connections = 10 mail_plugins = " quota" }

2 11

sieve: active= doesn't seem to use bindir=
by David Mandelberg 05 Oct '21

05 Oct '21

Hi, I'm trying to set up dovecot to read sieve source files from a read-only directory, and save compiled binaries to a separate directory with the bindir option. That worked when I pointed the sieve option at a single file, but I just changed it to point at a directory and added the active= option, also pointing at a symlink in a read-only directory. It looks like dovecot is trying to save the compiled active script to the same directory as the source file, instead of to bindir. Am I missing something? $ doveconf -n # 2.3.13 (89f716dc2): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.13 (cdd19fe3) # OS: Linux 5.10.0-8-amd64 x86_64 Debian 11.0 ext4 ... plugin { sieve = file:/usr/local/etc/mail/%{domain}/%{username}/sieve;active=/usr/local/etc/mail/%{domain}/%{username}/sieve/.active.sieve;bindir=/var/cache/mail/%{domain}/%{username}/sieve sieve_before = file:/etc/dovecot/sieve-before sieve_filter_bin_dir = /etc/dovecot/sieve-filter-bin sieve_filter_exec_timeout = 30s sieve_global_extensions = +vnd.dovecot.filter sieve_plugins = sieve_extprograms sieve_user_log = /var/local/mail/persistent/mail/%{domain}/%{username}/sieve.log } ... Relevant logs: lmtp(david(a)mandelberg.org)<90751><rqtQHUiTXGF/YgEA4Ys4ZQ>: Error: open(/usr/local/etc/mail/mandelberg.org/david/sieve/.active.svbin.mail-stor… failed: Read-only file system lmtp(david(a)mandelberg.org)<90751><rqtQHUiTXGF/YgEA4Ys4ZQ>: Error: sieve: binary /usr/local/etc/mail/mandelberg.org/david/sieve/.active.svbin: save: failed to create temporary file: open(/usr/local/etc/mail/mandelberg.org/david/sieve/.active.svbin.) failed: Read-only file system

2 3

Issue with the log service after upgrading from 2.1.17 to 2.3.10.1
by Grant Keller 05 Oct '21

05 Oct '21

Hello, As stated in the subject we have been doing a pretty big version upgrade. Both new and old are on CentOS 7. For the second time, one of our upgraded servers have had the dovecot log process start consuming 100% cpu, and the strace output shows it trying to access /etc/localtime: stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2819, ...}) = 0 stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2819, ...}) = 0 stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2819, ...}) = 0 stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2819, ...}) = 0 stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2819, ...}) = 0 stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2819, ...}) = 0 With no other output then that multiple times a second. The process itself shows this from ps: root 76106 8.3 0.0 15384 6532 ? R Sep29 140:21 dovecot/log [service too fast: 34/34/imap-postlogin: ] As a part of this upgrade we also modified our postlogin script to include an index location for each user, so I am not sure if this is related to that change or a change in the logging service. Any help tracking this down is appreciated. # OS: Linux 3.10.0-1160.42.2.el7.x86_64 x86_64 CentOS Linux release 7.9.2009 (Core) # Hostname: d.lab.imapd.sonic.net auth_failure_delay = 0 auth_master_user_separator = * auth_username_format = %Ln auth_verbose = yes auth_verbose_passwords = sha1 auth_worker_max_count = 64 default_client_limit = 10000 listen = * login_log_format_elements = user=<%u> session=%{session} method=%m rip=%r lip=%l mpid=%e %c login_trusted_networks = 64.142.18.0/24 64.142.111.71/32 64.142.111.37/32 76.191.254.238/32 64.142.111.79/32 64.142.111.34/32 157.131.224.152/32 157.131.224.153/32 184.23.168.75/32 184.23.168.76/32 mail_fsync = always mail_log_prefix = "%s(%u): session=%{session} " mail_plugins = zlib maildir_very_dirty_syncs = yes mmap_disable = yes passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes } passdb { args = imap driver = pam } plugin { lazy_expunge = DELETED_MESSAGES. mail_log_events = delete expunge flag_change mail_log_fields = uid box msgid from flags size mwi_update_debug = no mwi_update_events = flag_change delete undelete expunge copy save mwi_update_hosts = 76.191.249.68 76.191.255.180 mwi_update_master_user = _mwi-master mwi_update_port = 6472 mwi_update_watch_folder = INBOX.Voicemail quota = fs:User quota stats_refresh = 30 secs stats_track_cmds = yes } protocols = imap pop3 service anvil { client_limit = 10000 } service auth { client_limit = 10000 vsz_limit = 1 G } service doveadm { inet_listener { port = 1842 } unix_listener doveadm-server { mode = 0666 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_limit = 7000 process_min_avail = 32 vsz_limit = 256 M } service imap-postlogin { executable = script-login -d /etc/dovecot/bin/sonic-imap-postlogin user = $default_internal_user } service imap { executable = imap imap-postlogin process_limit = 7000 vsz_limit = 2516 M } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } process_limit = 2000 process_min_avail = 32 vsz_limit = 512 M } service pop3-postlogin { executable = script-login -d /etc/dovecot/bin/sonic-pop3-postlogin user = $default_internal_user } service pop3 { executable = pop3 pop3-postlogin process_limit = 2000 vsz_limit = 512 M } shutdown_clients = no ssl = no ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL syslog_facility = local0 userdb { driver = passwd } verbose_proctitle = yes protocol imap { imap_id_send = support-url support-email imap_max_line_length = 128 k mail_max_userip_connections = 20 mail_plugins = zlib mwi_update mail_log notify imap_zlib } protocol pop3 { mail_plugins = zlib lazy_expunge pop3_fast_size_lookups = yes pop3_uidl_format = %f } Grant Keller System Operations grant.keller(a)sonic.com

1 1