- dovecot - dovecot.org

[Dovecot] namespace public / namespace shared - question
by Michal Soltys 21 Nov '08

21 Nov '08

After looking through wiki/config/list I'm still not sure, what exactly is the difference between those two. Even all the examples in dovecot's wiki don't have a single "namespace shared" anywhere. And there's only short mention about the difference in dovecot.conf . Peeking into rfc2342 - would shared namespace relate to "Other Users' Namespace(s)" and public namespace to "Shared Namespace(s)" ? Does perhaps the difference only lie on the client side, depending on the namespace it's asking, while functionally it's the same from the perspective of dovecot ?

2 1

[Dovecot] userdb, Dovecot LDA not using mail_location config properly?
by k bah 21 Nov '08

21 Nov '08

I use Dovecot 1.0.5. I use LDAP for the user database and Dovecot LDA. --- dovecot.conf mail_location = maildir:/var/spool/mail/data/%Lu:INDEX=/var/spool/mail/index/%Lu auth default { mechanisms = plain (Note: TLS is used anyways..) userdb prefetch { } passdb ldap { # Path for LDAP configuration file, see doc/dovecot-ldap-example.conf args = /etc/dovecot/dovecot-ldap.conf_passdb (symlink do dovecot-ldap.conf) } userdb ldap { # Path for LDAP configuration file, see doc/dovecot-ldap-example.conf args = /etc/dovecot/dovecot-ldap.conf_userdb (symlink do dovecot-ldap.conf) } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = maildeliver group = mail } } } --- dovecot-ldap.conf Q1: auth_bind_userdn (commented since it would avoid the use of passdb and userdb, right?) # auth_bind_userdn = ... # userdb user_filter = (&(objectclass=postfixuser)(mail=%u)) user_attrs = uid=user # passdb pass_filter = (&(objectclass=inetlocalmailrecipient)(uid=%u)) pass_attrs = uid=user,userPassword=password,uid=userdb_user --- mail log host postfix/smtpd[8923]: connect from localhost[127.0.0.1] host postfix/smtpd[8923]: 5B449EA2C6: client=localhost[127.0.0.1] host postfix/cleanup[8925]: 5B449EA2C6: message-id=<20081121103114.5B449EA2C6@host> host postfix/smtpd[8923]: disconnect from localhost[127.0.0.1] host postfix/qmgr[8894]: 5B449EA2C6: from=<sender(a)otherdomain.org>, size=368, nrcpt=1 (queue active) host deliver(person(a)mydomain.com): Loading modules from directory: /usr/lib/dovecot/modules/lda host deliver(person(a)mydomain.com): Module loaded: /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so host dovecot: auth(default): master in: USER 1 person(a)mydomain.com service=deliver host dovecot: auth(default): prefetch(person(a)mydomain.com): passdb didn't return userdb entries (#0) host dovecot: auth(default): ldap(person(a)mydomain.com): user search: base=dc=mydomain,dc=com scope=subtree filter=(&(objectclass=postfixuser)(mail=person(a)mydomain.com)) fields=uid host deliver(person(a)mydomain.com): auth input: person(a)mydomain.com (#1) host deliver(person(a)mydomain.com): auth input: user=person~mydomain.com host deliver(person(a)mydomain.com): auth input: uid=501 host deliver(person(a)mydomain.com): auth input: gid=12 (#2) host deliver(person(a)mydomain.com): maildir: data=/var/spool/mail/data/person@mydomain.com:INDEX=/var/spool/mail/index/person@mydomain.com (#3) host deliver(person(a)mydomain.com): maildir: root=/var/spool/mail/data/person(a)mydomain.com, index=/var/spool/mail/index/person(a)mydomain.com, control=, inbox= host dovecot: auth(default): master out: USER 1 person(a)mydomain.com user=person~mydomain.com uid=501 gid=12 host deliver(person(a)mydomain.com): msgid=<20081121103114.5B449EA2C6@host>: saved mail to INBOX host postfix/pipe[8929]: 5B449EA2C6: to=<person(a)mydomain.com>, relay=dovecot, delay=0.69, delays=0.19/0.02/0/0.48, dsn=2.0.0, status=sent (delivered via dovecot service) host postfix/qmgr[8894]: 5B449EA2C6: removed What I don't get is that since I use userdb (read mail log lines marked (#0-3) and the "mail_location" option from dovecot.conf), mail should be saved to "person~mydomain.com" and not "person(a)mydomain.com" on the disk(?). Q2: Did I misunderstood the meaning of userdb/mail_location, is that right (this behavior)? Q3: Is it misconfigured? I want to save mail on the disk to person~mydomain.com, when I get that right (save mail to what line #1 tells is "user"), I'll use mailRoutingAddress (my mailroutingaddress = person~mydomain.com(a)mydomain.com, mail_location would use %Ln). The passdb and userdb prefetch are working ok on the user is checking mail. thanks = PathMaker for Six Sigma Complete low-cost Six Sigma toolset. Equip your black and green belts. http://a8-asy.a8ww.net/a8-ads/adftrclick?redirectid=1198ebf9f950733925452d3… -- Powered by Outblaze

2 1

[Dovecot] CRAM-MD5 and proxy_maybe
by David Jonas 20 Nov '08

20 Nov '08

When using proxy_maybe CRAM-MD5 authentication fails when the connection is proxied. Is this expected behavior? Is proxy_maybe too simplified for this case? We're using SQL so I could rewrite the query with IFs to fake proxy_maybe and return the password as NULL and nologin as Y, but if it works that way couldn't it work with proxy_maybe? This works: password_query = \ SELECT NULL AS password, host, CONCAT(user,'@',domain) AS destuser \ 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS proxy \ FROM accounts WHERE class='pop' AND domain='%d' This doesn't work if proxied and CRAM-MD5 auth: password_query = \ SELECT \ CONCAT(user,'@',domain) AS user, password, \ host, 'Y' AS proxy_maybe, \ target AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \ FROM accounts WHERE \ class='pop' AND domain='%d' AND user='%n' \ LIMIT 1 Thanks, David

2 3

[Dovecot] Sieve RFC5229 support?
by list_dovecot＠bluerosetech.com 20 Nov '08

20 Nov '08

I'd like to take advantage of RFC5229 match variables (it would reduce the number of rules I have by an order of magnitude); however, the required extension isn't supported yet. Am I mistaken? If not, are there plans to support it?

2 1

[Dovecot] Unbreakable NFS locking issues...
by Rod Treweek 20 Nov '08

20 Nov '08

Hello All, We are struggling to find a solution to a problem we are encountering with a load-balanced email setup. Currently, we have a Coyote loadbalancer, and 3 Postfix/Dovecot nodes that then get their information from a mysql database. The problem is that after a couple weeks, we start seeing NFS locking issues occur, which then takes email completely down, requiring a site visit to basically do an interactive mode reboot to shut off NFS so that we can remount the filesystem again. We have our mailstore on an Aberdeen NAS which is accessed over NFS v. 4. Dovecot version 1.1.2 Here's the relevant mysql string: grep -v '^ *$#.*$\?$' dovecot-mysql.conf driver = mysql connect = host=X.X.X.X dbname=Something user=Something password=Something password_query = SELECT username as user, password, concat('/NFS1MAILDIR/mailSysV2/', maildir) as userdb_home, concat('maildir:/NFS1MAILDIR/mailSysV2/', maildir) as userdb_mail, 143 as userdb_uid, 143 as userdb_gid, concat('*:bytes=', floor(quota*1024)) AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' user_query = SELECT concat('/NFS1MAILDIR/mailSysV2/', maildir) as home, concat('maildir:/NFS1MAILDIR/mailSysV2/', maildir) as mail, concat('maildir:/NFS1MAILDIR/mailSysV2/', maildir) as maildir, 143 AS uid, 143 AS gid, concat('*:bytes=', floor(quota*1024)) AS quota_rule FROM mailbox WHERE username = '%u' AND active = '1' And here's what our configuration is on each of the nodes: dovecot -n # 1.1.2: /usr/local/etc/dovecot.conf protocols: imap pop3 ssl_ca_file: /usr/local/etc/dovecot/certs/tdpserver.crt ssl_cert_file: /usr/local/etc/dovecot/certs/tdpserver.crt ssl_key_file: /usr/local/etc/dovecot/certs/tdpserver.key ssl_parameters_regenerate: 0 ssl_cipher_list: ALL:!LOW:!SSLv2 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: postfix login_greeting: Something witty here.. login_process_per_connection: no login_max_connections: 512 max_mail_processes: 2048 mail_max_userip_connections: 50 verbose_proctitle: yes first_valid_uid: 69 last_valid_uid: 500 first_valid_gid: 69 last_valid_gid: 500 mail_access_groups: postfix mail_privileged_group: postfix mail_location: mbox:/NFS1MAILDIR/mailSysV2/%d/%u:INDEX=/usr/local/mail/indexes/%d/%1n/%n mmap_disable: yes dotlock_use_excl: no mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: login plain user: dovecot passdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf userdb: driver: sql args: /usr/local/etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: dovecot group: dovecot plugin: quota: dict:user::proxy::quota imap_quota: dict:user::proxy::quota quota_rule: *:storage=528576 dict: quota: mysql:/usr/local/etc/dovecot/dovecot-dict-quota.conf Any help you can offer is greatly, greatly appreciated, as well as opinions on any other 'validated' postfix/dovecot email enterprise design solutions. Thanks Very Much In Advance, R.T

6 13

[Dovecot] New message notification
by Juan Asensio Sánchez 19 Nov '08

19 Nov '08

Hi What is the best option to notify a user that a message has arrived? The intention is to write a script that connects to a jabber server and checks if the user is online, so then a message is sent to user notifying him that he has received a new message. The solution should be compatible with Sieve filtering, so the script should not be executed when the message is moved to the SPAM folder, or pass to the script an argument specifying the folder where the message has been saved. Regards and thanks in advance. Juan Asensio Sánchez - http://www.nutum.es

2 1

[Dovecot] Solving CVE-2008-4870
by Michal Hlavinka 19 Nov '08

19 Nov '08

Hi, we're trying to solve CVE-2008-4870 = rhbz#436287 = dovecot.conf is world readable - possible password exposure. This problem seems to be little more complicated than we thought. dovecot.conf can contain passphrase for ssl key, which is available for everyone since dovecot.conf has world readable permissions. (In CVE's description is note that it RHEL's/Fedora's problem, but it affects all systems imo) We was thinking about few ways how to fix it: 1) 0640 permissions for dovecot.conf - but it can became not readable for dovecot 2) 0640 root:mail and set deliver to group mail with sgid - possible security problem 3) don't store passphrase in dovecot.conf, just ask for it when dovecot's started - can hang boot process, not good As part of investigating, I've found dovecot is storing all variables in environment variables - it means even passphrase? I'm not completely sure, but all variables can be read via /proc/<pid>/environ (I don't know if it becomes readable in some circumstances.) Is there any plan to solve this problem? Cheers, Michal

3 3

[Dovecot] patch: list shared namespace
by Bernhard Herzog 19 Nov '08

19 Nov '08

Hi, I've been working on a patch for dovecot 1.2 from the Kolab branch (http://hg.intevation.org/kolab/dovecot-1.2_kolab-branch/) that implements listing of shared namespaces. I've got something that works in some basic way but is still missing some pieces. See the attached patch, which also contains some installation and configuration notes. Implementation notes: One of the main problems the patch addresses is getting a list of all users that have mailboxes the logged in user can see. The patch uses a dict to cache information about which users have at least one mailbox that is visible to other users. The dict doesn't cache which other users, though. The cache entry for a given user is updated whenever the dovecot-acl-list file in the maildir root directory is updated. This ties the implementation to a specific acl backend to an extent, but that shouldn't be a problem at the moment. Another problem is that namespaces for all those users have to be created. The patch does that in shared-storage.c when the shared storage is created. At this stage of development of the patch that works well enough, I think, but it might be better to update the namespaces whenever a list iterator is created. To avoid unnecessary coupling between the shared namespace code and the ACL plugin, the shared namespace code has a hook that it calls when it needs a list of all the users who may have mailboxes visible to the current user. The ACL plugin sets that hook and uses the dict to produce that list. This way, the ACL plugin depends on the shared namespace code but not the other way round and all the dict handling is in the ACL plugin. I'm not sure the new hook is really needed. The patch could perhaps just as well extend the acl_next_hook_mail_storage_created and acl_next_hook_mailbox_list_created functions to do the namespace creation when they're called for a shared storage or mailbox list. Problems: All of my tests so far involved a shared namespace of the form namespace shared { separator = / prefix = users/%%u/ location = maildir:.../var/mail/%%u:... subscriptions = no list = yes hidden = no } Also, let's assume two users, ford and arthur with ford's "INBOX/hhgttg" available to arthur as "users/ford/INBOX/hhgttg". Arthur may not list ford's INBOX, though. In the following the current user is always arthur. I found the following problems: - LIST response includes namespaces the user doesn't really have access to. E.g. if there's another user, zaphod who's made some mailbox available to somebody else, but not arthur, arthur still sees * LIST (\Noselect \HasChildren) "/" "users/zaphod" Not sure it's worth fixing this, though. - List with "%" doesn't list all intermediate mailboxes. On the one hand arthur sees this: x LIST "" "*" ... * LIST (\Noselect \HasChildren) "/" "users/ford" * LIST (\HasNoChildren) "/" "users/ford/INBOX/hhgttg" x OK List completed. OTOH, with "%" only this: x LIST "" "users/ford/%" x OK List completed. cyrus shows x LIST "" "users/ford/%" * LIST (\Noselect \HasChildren) "/" "users/ford/INBOX" x OK List completed. At least Kontact resp. KMail rely on this. - The dovecot-acl-list is not always rebuilt, even when it should have been, AFAICT. In particular, if the file exists but is empty, it's never updated, even when ACL later change. Maybe this is a bug in the Kolab branch. Cheers, Bernhard -- Bernhard Herzog | ++49-541-335 08 30 | http://www.intevation.de/ Intevation GmbH, Neuer Graben 17, 49074 Osnabrück | AG Osnabrück, HR B 18998 Geschäftsführer: Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner

2 16

[Dovecot] Bug in 1.1.4: New line required in ACL files
by sleeper-＠gmx.net 19 Nov '08

19 Nov '08

Hello, just wanted to notify you about a bug i found in 1.1.4 ACL handling: Global ACLs are ignored, when there is no line break (i.e. "owner lr" is ignored while "owner lr\n" works). I didn't track this down to see if the same happens for per-user ACLs, but it should be quite obvious in the source anyways. Regards -- Sensationsangebot nur bis 30.11: GMX FreeDSL - Telefonanschluss + DSL für nur 16,37 Euro/mtl.!* http://dsl.gmx.de/?ac=OM.AD.PD003K11308T4569a

2 1

[Dovecot] Mail.app & Subscriptions
by Neil 19 Nov '08

19 Nov '08

Client: Mail.app v.3.5 Server: Dovecot 1.1.6 I've noticed that when I go to "Account Info" in Mail.app, and then to the "Subscription List" tab, Mail.app will spin for a bit, and then give up, without showing any folders and all the buttons are grayed out. Does anyone know if this a Mail.app issue or a Dovecot issue, if there're any work-arounds, and/or if this is something I should be concerned about? Thanks, Neil.

2 1

[Dovecot] Password authentication and character set
by Fredrik Grönqvist 19 Nov '08

19 Nov '08

Hi, I've searched in the wiki and in the mailinglist archives but haven't found anything about password character sets within the dovecot authentication deamon. My problem is that we have users with passwords containing scandinavian characters (äöå, umlauts) and the debug log shows that different clients send the password in different charsets. The passwords are stored in a Mysql table, if that makes any difference. Outlook Express with LATIN 1 (ISO-8859-1): Nov 18 16:56:39 resilar dovecot: auth-worker(default): sql(fgr-1,193.64.206.190): Password mismatch Nov 18 16:56:39 resilar dovecot: auth-worker(default): sql(fgr-1,193.64.206.190): MD5(<E4><E4>kk<F6>si<E4>) != '$1$xMPPHRdL$I0mrlPi5FMtwauSf20vjz0' MacMail UTF8: Nov 18 17:23:37 resilar dovecot: auth-worker(default): sql(fgr-1,193.64.206.190): Password mismatch Nov 18 17:23:37 resilar dovecot: auth-worker(default): sql(fgr-1,193.64.206.190): MD5(ääkkösiä12) != '$1$xMPPHRdL$I0mrlPi5FMtwauSf20vjz0' Is there a setting that "forces" the authentication daemon to convert the provided password to a specific charset before the comparison takes place, or how should one handle this? dovecot -n # 1.1.4: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /etc/ssl/certs/mail.crt ssl_key_file: /etc/ssl/private/mail.key ssl_cipher_list: ALL:!LOW disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_greeting: mail ready. login_process_per_connection: no mail_privileged_group: mail mail_location: maildir:~/mail mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): delay-newmail outlook-idle imap_client_workarounds(imap): delay-newmail outlook-idle imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): sieve_storage(default): sieve_storage(imap): sieve_storage(pop3): sieve_storage(managesieve): ~/ sieve(default): sieve(imap): sieve(pop3): sieve(managesieve): ~/.dovecot.sieve auth default: mechanisms: plain login username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@+ verbose: yes debug: yes debug_passwords: yes worker_max_count: 50 passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: prefetch userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: quota: maildir Chears Fredrik -- ------------------------------------------------------------------------ Fredrik Grönqvist ------------------------------------------------------------------------

3 13

[Dovecot] pam_start() failed: system error
by Peter Orlowski 18 Nov '08

18 Nov '08

Hi, I'm using dovecot 1.1.3 on FreeBSD 6.3, x86, files are on NFS, except control and index files, which are local, on UFS2. It's moderately loaded, there are usually not more than 30 clients simultaneously. dovecot runs fine for 3-10 days, then people can't connect any more, and dovecot says: Nov 18 13:20:44 dizzy dovecot-auth: pam_ldap: ldap_simple_bind Can't contact LDAP server Nov 18 13:20:44 dizzy dovecot-auth: pam_ldap: reconnecting to LDAP server... Nov 18 13:20:44 dizzy dovecot-auth: pam_ldap: ldap_simple_bind Can't contact LDAP server Nov 18 13:20:44 dizzy dovecot-auth: pam_ldap: ldap_simple_bind Can't contact LDAP server Nov 18 13:20:44 dizzy dovecot-auth: pam_ldap: ldap_simple_bind Can't contact LDAP server Nov 18 13:21:46 dizzy dovecot: auth-worker(default): pam(xxxx,xxx.xxx.xxx.xxx): pam_start() failed: system error Nov 18 13:21:46 dizzy dovecot-auth: in openpam_load_module(): no pam_permit.so found Nov 18 13:22:12 dizzy dovecot-auth: in openpam_load_module(): no pam_login_access.so found Nov 18 13:22:31 dizzy dovecot-auth: in openpam_load_module(): no pam_unix.so found Nov 18 13:22:42 dizzy dovecot-auth: in openpam_load_module(): no /usr/local/lib/pam_ldap.so found After restarting dovecot things are back to normal. I have tried different settings for worker_max_count, and I had blocking=no in the passdb config until a few day ago; changing that didn't help either. Here's my current config: # 1.1.3: /usr/local/etc/dovecot.conf protocols: imaps pop3s ssl_cert_file: /etc/ssl/certs/mailitp-chain.pem ssl_key_file: /etc/ssl/certs/mailkey2.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login verbose_proctitle: yes first_valid_gid: 0 mail_privileged_group: mail mail_location: mbox:~/mail/:INDEX=/srv/dovecot/indexes/%u.oldmail:INBOX=/var/mail/%u mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): zlib mail_plugins(imap): zlib mail_plugins(pop3): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: / prefix: NEWmail/ location: maildir:~/Maildir/:INDEX=/srv/dovecot/indexes/%u:CONTROL=/srv/dovecot/control/%u list: yes subscriptions: yes namespace: type: private separator: / location: mbox:~/mail/:INBOX=/var/mail/%u:INDEX=/srv/dovecot/indexes/%u.oldmail:CONTROL=/srv/dovecot/control/%u.oldmail inbox: yes list: yes subscriptions: yes auth default: worker_max_count: 20 passdb: driver: pam args: blocking=yes userdb: driver: passwd Greetings, -- Peter Orlowski

2 2

[Dovecot] MESSAGE Quota not RFC2087 compliant
by Braun, Martin 18 Nov '08

18 Nov '08

Hi, the configuration of my Dovecot 1.1.3 quota plugin looks like this: quota_rule = *:storage=1G quota_rule2 = *:messages=1337 this leads to the following GETQUOTAROOT response: 01 GETQUOTAROOT INBOX * QUOTAROOT "INBOX" "mbraun quota" * QUOTA "mbraun quota" (STORAGE 6553 1048576 MESSAGES 122 1337) 01 OK Getquotaroot completed. RFC2087 (http://www.faqs.org/rfcs/rfc2087.html) describes the response like as: STORAGE: Sum of messages' RFC822.SIZE, in units of 1024 octets MESSAGE: Number of messages As you can see, the response "MESSAGES" differs from the specified "MESSAGE" which leads to parsing issues on RFC compliant IMAP client implementations. Using *:message=1337 throws a configuration error on Dovecot startup. dovecot-1.1.6/src/plugins/quota/quota.h /* Number of messages. */ #define QUOTA_NAME_MESSAGES "MESSAGES" Greetings, Martin

2 1

[Dovecot] [PATCH] dovecot-1.2: fix build with Sun C compiler
by Andrey Panin 18 Nov '08

18 Nov '08

This small patch fixes dovecot-1.2 build with Sun C compiler.

1 0

[Dovecot] ManageSieve SECURITY hole: virtual users can edit scripts of other virtual users (all versions)
by Stephan Bosch 17 Nov '08

17 Nov '08

Hello, While updating the ManageSieve implementation to the latest draft specification I noticed a major omission in the way script names are handled. Essentially, script names are directly appended to the sieve storage directory path and suffixed with '.sieve'. This does not take the use of '../' in script names into account. Therefore, clever virtual users that know the directory structure of the server can read and edit script files of other virtual users with the same system uid. The added '.sieve' suffix prevents further security breach, because only sieve scripts are accessible this way. Note that of course any publicly accessible sieve script is also affected. I am sorry to report that this bug was introduced pretty much from the start, meaning that all versions of the ManageSieve patch/package are affected. To quickly resolve this issue, I provide patches against the existing releases and I release new versions for Dovecot v1.1 through v1.2. The security patches against the existing releases are very small and should therefore also apply to older versions or can be adjusted to apply cleanly with relative ease. The security patches are available as follows: http://www.rename-it.nl/dovecot/1.0/dovecot-1.0.15-managesieve-v9.3-securit… http://www.rename-it.nl/dovecot/1.0/dovecot-1.0.15-managesieve-v9.3-securit… http://www.rename-it.nl/dovecot/1.1/dovecot-1.1-managesieve-0.10.3-security… http://www.rename-it.nl/dovecot/1.1/dovecot-1.1-managesieve-0.10.3-security… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.0-security… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.0-security… The security patch for v1.0 is applied against the patched Dovecot tree, while patches for v1.1 and v1.2 are applied against the ManageSieve package. The new releases are available as follows (v1.1 and v1.2 versions have additional changes, read the NEWS files for more info): http://www.rename-it.nl/dovecot/1.0/dovecot-1.0.15-MANAGESIEVE-v9.4.diff.gz http://www.rename-it.nl/dovecot/1.0/dovecot-1.0.15-MANAGESIEVE-v9.4.diff.gz… http://www.rename-it.nl/dovecot/1.1/dovecot-1.1-managesieve-0.10.4.tar.gz http://www.rename-it.nl/dovecot/1.1/dovecot-1.1-managesieve-0.10.4.tar.gz.s… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.1.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.1.tar.gz.s… Refreshed ManageSieve patches for v1.1 and v1.2 are available to avoid confusion, but an existing patched Dovecot should work fine. I hope package maintainers will quickly incorporate the security patches to get rid of this stupidity as soon as possible. Don't hesitate to notify me when there are problems! Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] Dovecot error with Symbian mail client
by jeeger＠thenybble.de 17 Nov '08

17 Nov '08

Greetings list, I have recently acquired an Nokia E71 (which comes with Symbian 3rd edition, feature pack 3 I believe). Accessing my emails has worked before, but now, I cannot connect to the mail server any longer. If I enable verbose_ssl, I get the following error in the log: SSL_accept() failed: error:140943F2:SSL routines:SSL3_READ_BYTES:sslv3 alert unexpected message [141.84.69.67] I cannot access my mail, the dialog just closes and the wireless connection ends. I am using dovecot version 1.0.13 and my config is # 1.0.13: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps ssl_cert_file: /etc/dovecot/dovecot.crt ssl_key_file: /etc/dovecot/dovecot.pem verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login auth default: passdb: driver: pam userdb: driver: passwd Thanks for your answers! Regards, Jan Seeger PS: I have tested the symbian client with gmail, and it works. So the problem is probably a bug in the communication between the symbian client and dovecot.

7 8

[Dovecot] store sieve scripts with maildir
by Samuel HAMEAU 17 Nov '08

17 Nov '08

Hi, I am using dovecot 1.0.10 and pysieved, in a master/slave cluster with ldap (auth_bind=yes). For conceptuals reasons, i would like to keep on the same partition the mailstore + sieve scripts. I have try to set "sieve" and "home" variables under the "plugin" section with an absolute path, and i have tried to override home variable in user_attrs (dovecot-ldap.conf) as well with an absolute path, but in vain. Is there a solution ? sam

3 6

[Dovecot] OT: Counting emails in IMAP folders
by Nigel Allen 17 Nov '08

17 Nov '08

Greetings I have a customer who has mail server running dovecot with an IMAP account (Customers) which contains hundreds of folders (one per customer). Looks like this: Customers Fred Smith and Co Joe Blogss Cust-1 Cust-n They have a requirement to report monthly on the total number of emails added to each customers' folder during the month. Basically I need to be able to run some kind of command line query that will give me each of the sub-folder names and the number of emails added to the folder for that month (or other user-specified time period). Any ideas please? TIA Nigel.

3 3

Re: [Dovecot] antispam plugin claims "antispam signature not found"
by Guillaume HILT 15 Nov '08

15 Nov '08

I have the same problem and i'm wondering how should i use this patch ? I'm not familiar with the patch command. Thanks. PS: Sorry for the empty mail Johannes Berg a écrit > On Tue, 2008-11-11 at 11:42 +0100, Johannes Berg wrote: > > >> Not sure, I personally think that moving them silently makes errors >> harder to diagnose. I'll add an option since then you can set this >> option (antispam_missing_signature = [error|move]) to move after you've >> tested and verified that it works just fine. >> > > Try this patch please, I have only compiled it so far. (there might be > rejects in the signature-log.c file unless you update to the current git > tree but you don't care about that) > > diff --git a/antispam.7 b/antispam.7 > index d07c1d0..e26db69 100644 > --- a/antispam.7 > +++ b/antispam.7 > @@ -108,6 +108,13 @@ plugin { > # mail signature (used with any backend requiring a signature) > antispam_signature = X-DSPAM-Signature > > + # action to take on mails without signature > + # (used with any backend requiring a signature) > + # (we recommend only setting this to 'move' after verifying that the > + # whole setup is working) > + # antispam_signature_missing = move # move silently without training > + antispam_signature_missing = error > + > # semicolon-separated list of Trash folders (default unset i.e. none) > # antispam_trash = > # antispam_trash = trash;Trash;Deleted Items > diff --git a/signature-log.c b/signature-log.c > index ab8cd6d..5b7b306 100644 > --- a/signature-log.c > +++ b/signature-log.c > @@ -99,7 +99,12 @@ int backend_handle_mail(struct mailbox_transaction_context *t, > return -1; > } > > - signature = signature_extract(t, mail); > + ret = signature_extract(t, mail, &signature); > + if (ret) > + return ret; > + > + if (!signature) > + return 0; > > switch (wanted) { > case CLASS_SPAM: > diff --git a/signature.c b/signature.c > index 7f9d83b..7ad29d6 100644 > --- a/signature.c > +++ b/signature.c > @@ -5,6 +5,7 @@ > #include "mail-storage-private.h" > > const char *signature_hdr = "X-DSPAM-Signature"; > +static int signature_nosig_ignore = 0; > > void signature_init(void) > { > @@ -12,6 +13,16 @@ void signature_init(void) > if (tmp) > signature_hdr = tmp; > debug("signature header line is \"%s\"\n", signature_hdr); > + > + tmp = get_setting("SIGNATURE_MISSING"); > + if (!tmp) > + tmp = "error"; > + if (strcmp(tmp, "move") == 0) { > + signature_nosig_ignore = 1; > + debug("will silently move mails with missing signature\n"); > + } else if (strcmp(tmp, "error") != 0) { > + debug("invalid signature_missing setting '%s', ignoring\n", tmp); > + } > } > > int signature_extract_to_list(struct mailbox_transaction_context *t, > @@ -23,10 +34,14 @@ int signature_extract_to_list(struct mailbox_transaction_context *t, > > signatures = get_mail_headers(mail, signature_hdr); > if (!signatures || !signatures[0]) { > - mail_storage_set_error(t->box->storage, > - ME(NOTPOSSIBLE) > - "antispam signature not found"); > - return -1; > + if (!signature_nosig_ignore) { > + mail_storage_set_error(t->box->storage, > + ME(NOTPOSSIBLE) > + "antispam signature not found"); > + return -1; > + } else { > + return 0; > + } > } > > while (signatures[1]) > @@ -42,23 +57,30 @@ int signature_extract_to_list(struct mailbox_transaction_context *t, > return 0; > } > > -const char *signature_extract(struct mailbox_transaction_context *t, > - struct mail *mail) > +int signature_extract(struct mailbox_transaction_context *t, > + struct mail *mail, const char **signature) > { > const char *const *signatures; > > signatures = get_mail_headers(mail, signature_hdr); > if (!signatures || !signatures[0]) { > - mail_storage_set_error(t->box->storage, > - ME(NOTPOSSIBLE) > - "antispam signature not found"); > - return NULL; > + if (!signature_nosig_ignore) { > + mail_storage_set_error(t->box->storage, > + ME(NOTPOSSIBLE) > + "antispam signature not found"); > + return -1; > + } else { > + *signature = NULL; > + return 0; > + } > } > > while (signatures[1]) > signatures++; > > - return signatures[0]; > + *signature = signatures[0]; > + > + return 0; > } > > void signature_list_free(struct siglist **list) > diff --git a/signature.h b/signature.h > index e25d1b5..1384924 100644 > --- a/signature.h > +++ b/signature.h > @@ -16,8 +16,8 @@ void signature_init(void); > int signature_extract_to_list(struct mailbox_transaction_context *t, > struct mail *mail, struct siglist **list, > enum classification wanted); > -const char *signature_extract(struct mailbox_transaction_context *t, > - struct mail *mail); > +int signature_extract(struct mailbox_transaction_context *t, > + struct mail *mail, const char **signature); > void signature_list_free(struct siglist **list); > > extern const char *signature_hdr; > > This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

2 4

Re: [Dovecot] [dspam-users] mysql fetch row error
by Marko Weber 15 Nov '08

15 Nov '08

Hi Steve, MTA = Postfix I have amavis - spamassassin - dspam installed. i think spamassassin scnas after dspam, cuase in the mail headers dspam comes at first. I use Dovecot as Imap Server OS = Gentoo Linux i put the config of dspam here = http://rafb.net/p/VCX8XO97.html if u need more confs just tell me , i can paste then marko Steve schrieb: > Hallo Marko > > This is not normal. DSPAM does not add the encoding. It must be something else you are using/doing to get that tagged with the encoding in front of every DSPAM tag. And I don't see the DSPAM signature in your header. This is not normal. If you have the other DSPAM header lines, then you should have the result as well. > > What MTA are you using? > How is the integration between MTA and DSPAM? > Do you have other filters running before and after DSPAM? > What IMAP server are you using? > What OS are you using? > Could you post your DSPAM config? > > > (Grüsse aus Zürich) > > // Steve > > -------- Original-Nachricht -------- > >> Datum: Sat, 15 Nov 2008 10:37:38 +0100 >> Von: Marko Weber <weber(a)zackbummfertig.de> >> An: "dspam-users(a)lists.nuclearelephant.com" <dspam-users(a)lists.nuclearelephant.com> >> Betreff: Re: [dspam-users] mysql fetch row error >> > > >> Hello Steve this is the "full" Header of a spam mail where the training >> also fails. >> withe the mysql fetch error............. >> >> marko >> >> >> Return-Path: <RoxieastronomerMyrick(a)fightingbobfest.org> >> X-Original-To: weber(a)salonwebserver.de >> Delivered-To: weber(a)salonwebserver.de >> Received: from localhost (localhost [127.0.0.1]) >> by salonwebserver.de (Postfix) with ESMTP id 02C8613BC09B >> for <weber(a)salonwebserver.de>; Fri, 14 Nov 2008 21:38:09 +0100 >> (CET) >> X-DSPAM-Result: =?iso-8859-1?Q?Spam=0D?= >> X-DSPAM-Confidence: =?iso-8859-1?Q?0.7177=0D?= >> X-DSPAM-Probability: =?iso-8859-1?Q?1.0000=0D?= >> ?iso-8859-1?Q?491de1b0254959695846858=0D?= >> X-DSPAM-Factors: 15, >> X-Virus-Scanned: amavisd-new at salonwebserver.de >> X-Spam-Flag: NO >> X-Spam-Score: 2.415 >> X-Spam-Level: ** >> X-Spam-Status: No, score=2.415 tagged_above=-1000 required=2.5 >> tests=[DNS_FROM_SECURITYSAGE=0.127, RCVD_IN_BL_SPAMCOP_NET=2.188, >> RDNS_DYNAMIC=0.1] >> Received: from salonwebserver.de ([127.0.0.1]) >> by localhost (kraftwerk1.salonwebserver.de [127.0.0.1]) >> (amavisd-new, port 10024) >> with ESMTP id nOQQilMNvp-o for <weber(a)salonwebserver.de>; >> Fri, 14 Nov 2008 21:38:07 +0100 (CET) >> Received: from zackbummfertig.de >> (static.243.42.46.78.clients.your-server.de [78.46.42.243]) >> (using TLSv1 with cipher ADH-CAMELLIA256-SHA (256/256 bits)) >> (No client certificate requested) >> by salonwebserver.de (Postfix) with ESMTPS id E86BD13BC078 >> for <weber(a)salonwebserver.de>; Fri, 14 Nov 2008 21:38:06 +0100 >> (CET) >> Received: from localhost (localhost [127.0.0.1]) >> by zackbummfertig.de (Postfix) with ESMTP id BC4BDECC067 >> for <weber(a)salonwebserver.de>; Fri, 14 Nov 2008 21:37:46 +0100 >> (CET) >> X-Virus-Scanned: amavisd-new at zackbummfertig.de >> Received: from zackbummfertig.de ([127.0.0.1]) >> by localhost (weberweb.zackbummfertig.de [127.0.0.1]) >> (amavisd-new, port 10024) >> with ESMTP id xr6ayW0lyDGC for <weber(a)salonwebserver.de>; >> Fri, 14 Nov 2008 21:37:43 +0100 (CET) >> Received: from rachel22b12579 (unknown [78.146.113.186]) >> by zackbummfertig.de (Postfix) with SMTP id 3E83CECC040 >> for <tbmarcom(a)acidbunker.de>; Fri, 14 Nov 2008 21:37:43 +0100 >> (CET) >> Date: Fri, 14 Nov 2008 20:38:01 +0000 >> From: Chrystal Huddleston <RoxieastronomerMyrick(a)fightingbobfest.org> >> Subject: gambling slot machines >> To: tbmarcom(a)acidbunker.de >> Message-id: <7686026460.20081111151378(a)fightingbobfest.org> >> Organization: fightingbobfest.org >> MIME-version: 1.0 >> Content-type: text/plain; charset=us-ascii >> Content-transfer-encoding: 7bit >> X-Priority: 3 (Normal) >> >> Steve schrieb: >> >>> Can you post the full header of the message in question? >>> >>> >>> -------- Original-Nachricht -------- >>> >>> >>>> Datum: Fri, 14 Nov 2008 23:18:39 +0100 >>>> Von: Marko Weber <weber(a)zackbummfertig.de> >>>> An: "dspam-users(a)lists.nuclearelephant.com" >>>> >> <dspam-users(a)lists.nuclearelephant.com> >> >>>> Betreff: Re: [dspam-users] mysql fetch row error >>>> >>>> >>> >>> >>>> Hi Steve, >>>> this sed thing dont worked for me...... sorry >>>> how i can get dspam working without this mysql fetch error ? >>>> u have any hints ? >>>> >>>> marko >>>> >>>> >>>> Steve schrieb: >>>> >>>> >>>>> -------- Original-Nachricht -------- >>>>> >>>>> >>>>> >>>>>> Datum: Fri, 14 Nov 2008 18:11:55 +0100 >>>>>> Von: Marko Weber <weber(a)zackbummfertig.de> >>>>>> An: "dspam-users(a)lists.nuclearelephant.com" >>>>>> >>>>>> >>>> <dspam-users(a)lists.nuclearelephant.com> >>>> >>>> >>>>>> Betreff: [dspam-users] mysql fetch row error >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>>>> Hello to all in the Mailinglist, >>>>>> >>>>>> i installed dspam on our server and it works so far that incoming >>>>>> >> mails >> >>>>>> are tagged by dspam. >>>>>> i installed "dovecot-antispam" for retraining. >>>>>> when in try to retrain a mail i get this in the dspam.debug log = >>>>>> >>>>>> 9056: [11/14/2008 15:23:01] mysql_fetch_row() failed in >>>>>> >>>>>> >>>> _ds_get_signature >>>> >>>> >>>>>> in the /var/log/messages log i get this = >>>>>> >>>>>> Nov 14 15:29:25 kraftwerk1 imap: antispam: /usr/bin/dspam >>>>>> >>>>>> >>>> --source=error >>>> >>>> >>>>>> --class=spam --signature==?iso-8859-1?Q?491d76cb23581804284693=0D?= >>>>>> >> ... >> >>>>>> Nov 14 15:29:25 kraftwerk1 dspam[9189]: Signature retrieval for >>>>>> '=?iso-8859-1?Q?491d76cb23581804284693=0D?=' failed >>>>>> Nov 14 15:29:25 kraftwerk1 dspam[9189]: Unable to find a valid >>>>>> signature. Aborting. >>>>>> Nov 14 15:29:25 kraftwerk1 dspam[9189]: process_message returned >>>>>> >> error >> >>>>>> -5. dropping message. >>>>>> >>>>>> >>>>>> but when i search for the signatur 491d76cb23581804284693 in the >>>>>> >> mysql >> >>>>>> database i can find it there. >>>>>> >>>>>> what is this ?iso-8859-1?Q? , is this causing the error ? >>>>>> >>>>>> >>>>>> >>>>>> >>>>> This means, that the plugin developer used the signature from the body >>>>> >>>>> >>>> instead of the one found in the header. You can verify yourself what >>>> >> the >> >>>> proper signature would be. Just issue this small one liner in sed: >>>> >>>> >>>>> sed -e '/^$/q' -ne 's/^X\-DSPAM\-Signature: >>>>> >>>>> >>>> $\([1-9][0-9]*,$\{0,1\}$[a-f0-9]\{20,32\}$\)$/\1/p' >>>> >> /path/to/your/message >> >>>> >>>> >>>>> This should print out the proper signature DSPAM should receive from >>>>> >> the >> >>>>> >>>>> >>>> plugin. The iso-8859-1 part indicates to me that the message is taken >>>> >> from >> >>>> a iso8859-1 encoded message body. >>>> >>>> >>>>> >>>>> >>>>> >>>>>> do any1 need my dspam.conf , then i can paste it on web. >>>>>> >>>>>> thank for helping. >>>>>> >>>>>> marko >>>>>> >>>>>> >>>>>> >>>>>> >>>>> Steve >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>> >>>>>> >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >> >> > >

2 1

[Dovecot] Mailbox Hashing
by Justin Krejci 14 Nov '08

14 Nov '08

First off, the website documentation is really good for Dovecot but while reading I was not able to find anything pertaining to inbox hashing for Maildirs. I saw plenty about hashing the directories that the user mailboxes live in but nothing about specifically hashing an individual user's inbox directory itself. Is there any method for hashing the inbox automatically after say 5,000 messages are stored? Example $Maildir/in/0/message0 $Maildir/in/0/message1 $Maildir/in/0/message2 . $Maildir/in/0/message4999 $Maildir/in/1/message5000 $Maildir/in/1/message5001 etc I am not currently using Dovecot but am interested to know if this is available or does running with 20,000+ messages in a single inbox not affect the performance much? I have looked into other file system tuning techniques such as enabling ext3 dir_index or using ReiserFS (maybe not ReiserFS anymore). There will likely be 15,000 to 20,000 accounts spread out on one or more servers using a 6-drive RAID10 setup. Most accounts are not expected to have high message quantities but there will be lots of concurrent connections via pop and imap (and webmail imap). Any suggestions or feedback would be appreciated.

3 6

Re: [Dovecot] Install Configuring and run.
by Marko Weber 14 Nov '08

14 Nov '08

Hello Thorsten, i got "dovecot-antispam" working now. also moving mails now fully work. but retraining dont seems to work fully. emails that are delivered to mailbox are scanned with user "clamav" 28799: [11/13/2008 23:26:25] DSPAM Instance Startup 28799: [11/13/2008 23:26:25] input args: /usr/bin/dspam --stdout --deliver=spam,innocent --mode=tum --tokenizer=chained,noise --enable-signature-headers --user clamav 28799: [11/13/2008 23:26:25] pass-thru args: --tokenizer=chained,noise --enable-signature-headers 28799: [11/13/2008 23:26:25] processing user clamav 28799: [11/13/2008 23:26:25] uid = 105, euid = 105, gid = 449, egid = 1000 28799: [11/13/2008 23:26:25] loading preferences for user clamav 28799: [11/13/2008 23:26:25] Loading preferences for uid 1 i dont have a maildrop filter ready yet that move spam tagged mails into SPAM folder. all is delivered to "incoming". when i now move the mail to SPAM; this is done by user "postfix" 28917: [11/13/2008 23:40:17] DSPAM Instance Startup 28917: [11/13/2008 23:40:17] input args: /usr/bin/dspam --source=error --class=spam --signature==?iso-8859-1?Q?1,491930ac25229173225906=0D?= 28917: [11/13/2008 23:40:17] pass-thru args: 28917: [11/13/2008 23:40:17] processing user postfix 28917: [11/13/2008 23:40:17] uid = 207, euid = 207, gid = 207, egid = 1000 28917: [11/13/2008 23:40:17] loading preferences for user postfix 28917: [11/13/2008 23:40:17] Loading preferences for uid 6 28917: [11/13/2008 23:40:17] Loading preferences for uid 0 28917: [11/13/2008 23:40:17] Loading preferences for uid 0 28917: [11/13/2008 23:40:17] default preferences empty. reverting to dspam.conf preferences. 28917: [11/13/2008 23:40:17] Loading preferences from dspam.conf 28917: [11/13/2008 23:40:17] using /var/spool/dspam/opt-in/local/postfix.dspam as path 28917: [11/13/2008 23:40:17] using /var/spool/dspam/opt-out/local/postfix.nodspam as path 28917: [11/13/2008 23:40:17] sedation level set to: 0 28917: [11/13/2008 23:40:17] DSPAM Instance Shutdown. Exit Code: 0 Now when i move the mail again into incoming (also done by user postfix), the mail dont get tagged with "innocent" , it is still tagged "spam". How do i get it work all under "clamav" and why are the removed mails from spam to incoming not tagged with "inncoent" ? (do you need any logs?) thank you marko Thorsten Vollmer schrieb: > On Thu, 2008-11-13 at 21:30 +0100, Marko Weber wrote: > >> Sorry to ask, >> so if dovecot-antispam-20080829 dont work for me you mean i should >> install the latest from webpage ? >> > > Yes, dovecot-antispam-1.1 should be sufficient. I already sent you the > link to an updated ebuild. Please be more proactive. > > Thorsten > >

2 6

[Dovecot] Folder aliases
by Daniel L. Miller 14 Nov '08

14 Nov '08

I don't if this has been discussed before - or already implemented - but it would be great if I could define one or more "aliases" for a folder. A particular example might be "Sent" where different (badly-written) clients might have hard-coded "Sent" folder locations like "Sent", "Sent Items", "Sent Mail", "Mail Delivered", etc. - and I'd love to get those consolidated. It would also be nice to show a different set of folders based on the client - or if that's not possible (if the client doesn't identify itself as part of the login sequence) then somehow via login name - maybe by an extension? So where my usual login might be "user(a)domain.com", and that would continue to be supported as the default login, I could now have "user(a)domain.com+thunderbird", "user(a)domain.com+mobile", etc.? -- Daniel

6 10

Re: [Dovecot] Install Configuring and run.
by Marko Weber 13 Nov '08

13 Nov '08

Sorry to ask, so if dovecot-antispam-20080829 dont work for me you mean i should install the latest from webpage ? Thorsten Vollmer schrieb: > On Thu, 2008-11-13 at 00:24 +0100, Marko Weber wrote: > >> Hello Thorsten thank you for taking time. >> I recompiled with -debug, but i also had to set -syslog >> otherwise gentoo dont compile. it says then , "useflag syslog enabled >> needs flag debug also set" >> >> we proceed further in the list then ? >> > > Yes, once you have new results. > > If dovecot-antispam-20080829 does not yet work for you, please try the > latest version and re-enable debugging. > > Thorsten > >

1 0

[Dovecot] New Dovecot server buildout review
by David Jonas 13 Nov '08

13 Nov '08

Hello Everyone, I have the opportunity to do a new mail system build out for about 20k email boxes over a few hundred domains. I already run a system like this, but this time I can do it right :). My thought on storage is to have a 12 drive JBOD system attached via SAS to a 3ware 9690SA raid controller. Drives would be RAID'd (10 or 5) to appear as one for message storage. Dovecot would run on that box and deliver directly from postfix. POP and IMAP connections would come in directly (no proxy). Postfix head boxes in front of this do anti-virus and spamassassin, so this box won't be doing any heavy crunching, just delivery and serving of messages. Does this sound reasonable? Is there details that I'm missing? An obvious bottleneck I'm overlooking? Is anyone running a similar config with success? It all sounds very standard, but I haven't run something like this before. Thanks for the help! David

1 0