- dovecot - dovecot.org

[Dovecot] Error in Sieve + Dovecot 1.1.3
by Allan Cassaro 09 Sep '08

09 Sep '08

Hi, when I upgrade my dovecot to lastest version (from 1.1.1 to 1.1.3) and sieve plugins I discover a little problem in deliver (LDA) or in Sieve interface. With version 1.1.1 I have this in my dovecot.conf (and works fine) protocol lda { postmaster_address = root(a)mct.gov.br hostname = faraday.mct.gov.br mail_debug = no mail_plugins = cmusieve quota sieve_global_dir = /etc/dovecot/scriptssieve/ sieve = /home/%u/.dovecot.sieve } When I upgrade, the deliver/LDA stop to work and show me this message (in logs): deliver(acassaro): cmusieve: /home/%u/.dovecot.sieve doesn't exist So, when I change the "sieve" parameter, everything works fine again. protocol lda { postmaster_address = root(a)mct.gov.br hostname = faraday.mct.gov.br mail_debug = no mail_plugins = cmusieve quota sieve_global_dir = /etc/dovecot/scriptssieve/ sieve = ~/.dovecot.sieve } So, I don't know if this error is on LDA or Sieve patch (probably in sieve patch) Versions: dovecot-1.1.3 dovecot-sieve-1.1.5 dovecot-1.1-managesieve-0.10.3 dovecot-1.1.2-managesieve-0.10.3.diff Regards.

4 3

[Dovecot] Thunderbird, subscriptions, and upgrade to 1.1.3
by Jack Stewart 08 Sep '08

08 Sep '08

Hi, I've upgraded from 1.0.7 to 1.1.3. When I did this, my Thunderbird lost its brain and did not show some subscribed folders. squirrelmail also seemed to have issues. Applemail and mutt were fine. The configuration output is below. Hopefully this is just me and just random bizarreness. There wasn't a problem in 1.0.7 but I could have been caught in mid-upgrade. Thunderbird did not seem to update the subscription file (or at least I could not find the one it thought it was using). Any pointers are appreciated. Thanks in advance. ---Jack /opt/dovecot/sbin/dovecot -c /etc/dovecot.conf -n # 1.1.3: /etc/dovecot.conf Warning: fd limit 1024 is lower than what Dovecot can use under full load (more than 6144). Either grow the limit or change login_max_processes_count and max_mail_processes settings base_dir: /var/run/dovecot/default-imap syslog_facility: local4 protocols: imap imaps listen: *:143 ssl_listen: *:993 ssl_ca_file: /etc/pki/dovecot/certs/caltech-ca.pem ssl_cert_file: /etc/pki/dovecot/certs/imap.caltech.edu.pem ssl_key_file: /etc/pki/dovecot/private/imap.caltech.edu.pem disable_plaintext_auth: yes login_dir: /var/run/dovecot/default-imap/login login_executable: /opt/dovecot/libexec/dovecot/imap-login login_greeting_capability: yes login_processes_count: 16 login_max_processes_count: 2048 max_mail_processes: 4096 verbose_proctitle: yes mail_location: maildir:/var/spool/maildir/%1Ln/%Ln:INDEX=/var/spool/dovecot/indexes/%1Ln/%Ln:CONTROL=/var/spool/dovecot/uidl/imap/%1Ln/%L mail_debug: yes mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes maildir_copy_preserve_filename: yes mail_plugins: fts fts_squat imap_client_workarounds: delay-newmail outlook-idle netscape-eoh pop3_reuse_xuidl: yes pop3_uidl_format: UID%u-%v namespace: type: private separator: . prefix: Mail. inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login verbose: yes passdb: driver: ldap args: /etc/dovecot.conf-ldap userdb: driver: static args: uid=vmail gid=mail home=/var/spool/maildir/%1Ln/%Ln socket: type: listen master: path: /var/run/dovecot/default-imap/auth-master mode: 384 user: vmail group: mail plugin: fts: squat fts_squat: partial=4 full=8

2 2

[Dovecot] zlib plugin nad moving mails, bug?
by Mateusz Kijowski 08 Sep '08

08 Sep '08

Hi, Recently I gzipped mails older than 30 days in our users' maildirs. I used find and gzip. Gzip added 'Z' at the end of the filename and everything seemed to work fine, users did not notice any difference in performance (yet :-), and I saved about 30% of our mail storage space. There seems to be a problem when moving gzipped messages from one folder to another though. Dovecot drops the Z flag, moved messages are not processed by the zlib plugin and email clients end up showing garbage. Is there something wrong with my config, or did I encounter a bug? dovecot -n follows: # 1.0.13: /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/dovecot.log protocols: imap imaps pop3s ssl_ca_file: /etc/certs/certum-chain.crt ssl_cert_file: /etc/certs/wild.dfqs.pl.crt ssl_key_file: /etc/certs/wild.dfqs.pl.key ssl_cipher_list: ALL:!LOW:!MEDIUM login_dir: /var/run/dovecot/login login_executable(default): /usr/lib64/dovecot/imap-login login_executable(imap): /usr/lib64/dovecot/imap-login login_executable(pop3): /usr/lib64/dovecot/pop3-login login_greeting: imap.dfqs.pl ready. login_process_per_connection: no login_processes_count: 5 login_max_processes_count: 32 max_mail_processes: 4096 verbose_proctitle: yes mail_location: maildir:~/mail:INDEX=/var/lib/dovecot/indexes/%Ln mail_debug: yes maildir_copy_with_hardlinks: yes maildir_copy_preserve_filename: yes mail_executable(default): /usr/local/lib64/dovecot-post-login-imap.sh mail_executable(imap): /usr/local/lib64/dovecot-post-login-imap.sh mail_executable(pop3): /usr/local/lib64/dovecot-post-login-pop3.sh mail_plugins(default): imap_quota trash quota acl zlib mail_plugins(imap): imap_quota trash quota acl zlib mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib64/dovecot/plugins/imap mail_plugin_dir(imap): /usr/lib64/dovecot/plugins/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/plugins/pop3 mail_log_max_lines_per_sec: 0 imap_client_workarounds(default): outlook-idle tb-extra-mailbox-sep imap_client_workarounds(imap): outlook-idle tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: / inbox: yes namespace: type: public separator: / prefix: Public/ location: maildir:/var/vmail/Public:CONTROL=~/Public/control:INDEX=~/Public/index namespace: type: shared separator: / prefix: Shared/ location: maildir:/var/vmail/Shared:CONTROL=~/Shared/control:INDEX=~/Shared/index auth default: verbose: yes debug: yes worker_max_count: 512 passdb: driver: pam args: dovecot userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: root group: vmail master: path: /var/run/dovecot/auth-master mode: 432 user: root group: vmail plugin: quota: maildir:storage=12582912:ignore=Trash acl: vfile: trash: /etc/dovecot/dovecot-trash.conf

5 5

Re: [Dovecot] LDAP filters
by Tomasz K Jarzynka 08 Sep '08

08 Sep '08

Quoting dovecot-request(a)dovecot.org: > Message: 9 > Date: Mon, 08 Sep 2008 12:33:29 +0400 > From: Proskurin Kirill <k.proskurin(a)fxclub.org> > Subject: [Dovecot] LDAP filters > To: Dovecot Mailing List <dovecot(a)dovecot.org> > Message-ID: <48C4E359.7090602(a)fxclub.org> > Content-Type: text/plain; charset=UTF-8; format=flowed > > Hello all. > > I'm have this problem: > > I'm want auth users by "uid" filed but this filed uniq only in one LDAP > container. So im what to tell dovecot were to look some "uid" by "mail" > filed of this user. > > Can im do this: > > pass_filter = (&(objectClass=mailUser)(mail=*@%d)(uid=%n)) > > Will this construction work? Why not (&(objectClass=mailUser)(mail=%u)(uid=%n)) ? PS. You really should consider solving this is a more elegant way ;) -- Tomasz Krzysztof Jarzynka / mob. +48 601 706 601 / HANDLE: TJ950-RIPE Network Information Systems Administrator / tomee(at)genesilico(d-o-t)pl Laboratory of Bioinformatics and Protein Engineering | www.genesilico.pl International Institute of Molecular and Cell Biology | www.iimcb.gov.pl

2 1

[Dovecot] v1.1.3 release candidate
by Timo Sirainen 08 Sep '08

08 Sep '08

I thought about making a release now, but I'll probably do some more fixes tomorrow, so here's a prerelease for everyone to test. :) If you see any bugs with this (old or new), please report. http://dovecot.org/tmp/dovecot-1.1.3-rc.tar.gz Important changes are: * mail_max_userip_connections limit no longer applies to master user logins. + login_log_format_elements: Added %k to show SSL protocol/cipher information. Not included by default. + imap/pop3-proxy: If auth_verbose=yes, log proxy login failures. + deliver: Added -s parameter to autosubscribe to autocreated mailboxes. - message parser fixes - hopefully fixes an infinite looping problem - SORT: One more assert-crashfix when renumbering index sort IDs. - mbox: Saving may have truncated the mail being saved - mbox: Several other bugfixes - mail_full_filesystem_access=yes was broken when listing mailboxes (it still is with maildir++ layout). - maildirlock utility was somewhat broken - zlib plugin: bzip2 support was somewhat broken - NFS: Make sure writing to files via output streams don't assert-crash when write() returns only partial success.

4 8

[Dovecot] LDAP filters
by Proskurin Kirill 08 Sep '08

08 Sep '08

Hello all. I'm have this problem: I'm want auth users by "uid" filed but this filed uniq only in one LDAP container. So im what to tell dovecot were to look some "uid" by "mail" filed of this user. Can im do this: pass_filter = (&(objectClass=mailUser)(mail=*@%d)(uid=%n)) Will this construction work? -- Best regards, Proskurin Kirill

2 1

[Dovecot] Error starting dovecot
by Diego Ledesma 08 Sep '08

08 Sep '08

Hello, I have a linux system (Ubuntu 7.04 server edition) running Postfix 2.3.8 Today i installed Dovecot through apt-get (got version 1.0.rc17 installed) and configured it to do sasl auth only, (i already have other pop3,smtp and imap servers running) following the howto's at dovecot.org The thing is that if i try to start dovecot or run dovecot -n i get this message: Error: Can't use mail executable /usr/lib/dovecot/imap: No such file or directory That directory does not exist but why should it if i don't want to run dovecot as imap? I only installed dovecot-common package. Also, i setted protocols to "none". Does anyone know why i get that error message? One last comment. Before installing dovecot on the production mail server i installed it on my laptop's linux (Ubuntu 8.04 LTS) for testing purposes. The testing mail server runs Postfix 2.5.1 and Dovecot 1.0.10 and in this case Dovecot runs fine (the /usr/lib/dovecot/imap directory does also not exist and dovecot.conf is configured exactly on both servers). This are the uncommented parts of dovecot.conf #Only use dovecot-auth protocols = none disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:~/Maildir mail_privileged_group = mail protocol imap { } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth default { mechanisms = plain login passdb passwd-file { args = /etc/passwd.dovecot } passdb pam { } userdb passwd { } user = root socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } dict { } plugin { } ---- Any help is greatly appreciated. Thanks. Diego.

6 11

Re: [Dovecot] iphone connection problem]
by dovecot＠feb17.org 08 Sep '08

08 Sep '08

Sorry, bounced this the first time ;( Darren I'd happily switched to a real cert if I knew that this was the problem. Are you using the cert actually on the phone to validate its identity? I have the org unit set slightly differently on my fake CA and the phone to make netscape derived browsers happy. The trouble is that I'm not getting a useful enough error message from anyone to diagnose problem. I have also considered putting my fake CA cert on the phone to see if that would make it happier, Darren >Charles Marcus wrote: >>You're not using self-signed certs by any chance? >> >> > >I have had good success using the cheapo certs from GoDaddy - they >offer a cert with multiple Alt names so you can connect using a >variety of server names. Quite inexpensive and the whole setup was >very smooth (they are just a cheapo registrar who verify you based on >the WHOIS info only) > >Ed W

1 0

Re: [Dovecot] iphone connection problem
by Ed W 08 Sep '08

08 Sep '08

Darren Platt wrote: > I'd happily switched to a real cert if I knew that this was the > problem. Are you using the cert actually on the phone to validate > its identity? I have the org unit set slightly differently on my fake > CA and the phone to make netscape derived browsers happy. The trouble > is that I'm not getting a useful enough error message from anyone to > diagnose problem. I have also considered putting my fake CA cert on > the phone to see if that would make it happier, Sorry - I don't have an iPhone - however, some of the super cheap providers are like near single digit dollars a year for a cert so it's not too expensive to run a test Ed W

1 0

[Dovecot] Cosmetic issue with dots in Maildir folder names
by Holger Weiss 08 Sep '08

08 Sep '08

Just a minor cosmetic issue: We use the listescape plugin in order to support "." characters in Maildir++ folder names, and in at least the following case, the escaped representation of the dot character ("\2e") won't be translated back to a "." in messages for the IMAP client: | 1 SELECT non.existent | 1 NO Mailbox doesn't exist: non\2eexistent However, SELECTing an existing folder whose name includes a dot works fine, and it also works in other cases, e.g.: | 2 CREATE does.exist | 2 OK Create completed. | 3 LIST "" does.exist | * LIST (\HasNoChildren) "/" does.exist | 3 OK List completed. This is with Dovecot 1.1.3; we use "separator = /" and we've defined REAL_SEP to '.' and VIRTUAL_SEP to '/' in the plugin. Holger

2 1

[Dovecot] ACL plugin: k permission and sub-subfolders
by Heiko Schlichting 07 Sep '08

07 Sep '08

Hi, I'm trying to disallow the creating of subfolders for some special folder for all users. Using ACL plugin for this seems to work at first glance but is not a full solution or is buggy as it allows the creation of sub-subfolders. I'm using the following ACL and namespace separator is "/": $ cat folder owner lrwstie Note: no "k" permission ("k" = create = Mailboxes can be created under this mailbox) Seems to work: a001 create "folder/subfolder" a001 NO Permission denied But: a002 create "folder/subfolder/subsubfolder" a002 OK Create completed. This is unexpected. Creating a subfolder is not allowed but a sub-subfolder is permitted? If this is intentional, the description in the wiki should mention this. And: How to disallow the creation of any subfolders and any sub-subfolders? Using "folder/.DEFAULT" instead of "folder" to define the ACL does not make any difference for the behavior. My configuration of dovecot is below the signature. Thanks, Heiko. Heiko Schlichting Freie Universität Berlin heiko(a)FU-Berlin.DE Zentraleinrichtung für Datenverarbeitung (ZEDAT) Telefon +49 30 838-54327 Fabeckstraße 32 Telefax +49 30 838454327 14195 Berlin # 1.1.3: /server/dovecot/server/etc/dovecot.conf base_dir: /server/dovecot/server/var/run/ syslog_facility: local6 protocols: imap pop3 listen(default): 130.133.4.84:8143 listen(imap): 130.133.4.84:8143 listen(pop3): 130.133.4.84:8110 ssl_disable: yes disable_plaintext_auth: no shutdown_clients: no nfs_check: no login_dir: /server/dovecot/server/var/logindir login_executable(default): /server/dovecot/server/libexec/dovecot/imap-login login_executable(imap): /server/dovecot/server/libexec/dovecot/imap-login login_executable(pop3): /server/dovecot/server/libexec/dovecot/pop3-login login_greeting: mail.zedat.fu-berlin.de ready. login_chroot: no login_processes_count: 16 login_max_processes_count: 512 max_mail_processes: 1500 verbose_proctitle: yes mail_uid: 865 mail_gid: 865 mail_location: maildir:/server/dovecot/spool/%2Ln/%Ln/maildir maildir_copy_preserve_filename: yes mail_executable(default): /server/dovecot/bin/wrapper imap mail_executable(imap): /server/dovecot/bin/wrapper imap mail_executable(pop3): /server/dovecot/bin/wrapper pop3 mail_plugins(default): acl quota imap_quota listescape mail_plugins(imap): acl quota imap_quota listescape mail_plugins(pop3): quota mail_plugin_dir(default): /server/dovecot/server/lib/dovecot/imap mail_plugin_dir(imap): /server/dovecot/server/lib/dovecot/imap mail_plugin_dir(pop3): /server/dovecot/server/lib/dovecot/pop3 mail_log_prefix: %Ls[%p]: user=<%u>, mail_log_max_lines_per_sec: 50 imap_client_workarounds(default): delay-newmail netscape-eoh imap_client_workarounds(imap): delay-newmail netscape-eoh imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %u pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: / inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login user: dovecot username_format: %Lu failure_delay: 1 passdb: driver: checkpassword args: /server/dovecot/bin/checkpassword-zedat userdb: driver: prefetch plugin: quota: maildir quota_rule: *:bytes=2G acl: vfile:/server/dovecot/server/etc/acls

2 1

Re: [Dovecot] Error starting dovecot
by Frank Elsner 06 Sep '08

06 Sep '08

On Sat, 6 Sep 2008 13:23:54 -0200 Diego Ledesma wrote: > On Sat, Sep 6, 2008 at 10:57 AM, Frank Elsner > <frank(a)moltke28.b.shuttle.de> wrote: > > On Fri, 5 Sep 2008 20:09:07 -0300 Diego Ledesma wrote: > > > > [ ... ] > > > >> I only installed dovecot-common package. > >> Also, i setted protocols to "none". > >> > >> Does anyone know why i get that error message? > > > > Protocols "none" also means no "imap". > > > > BTW ... imap is a protocol :-) > > > > > > --Frank Elsner > > > > Oh. According to the comments in my dovecot.conf setting protocols to > "none" means that only dovecot-auth is enabled... > What should i write under Protocols to just enable that? My dovecot.conf contains protocols = imap imaps BTW, Please keep the thread on the mailing list, "Cc"ed here. --Frank Elsner

3 2

[Dovecot] v1.1.3 released
by Timo Sirainen 05 Sep '08

05 Sep '08

http://dovecot.org/releases/1.1/dovecot-1.1.3.tar.gz http://dovecot.org/releases/1.1/dovecot-1.1.3.tar.gz.sig This fixes several mbox problems previous v1.1 releases have had. * mail_max_userip_connections limit no longer applies to master user logins. + login_log_format_elements: Added %k to show SSL protocol/cipher information. Not included by default. + imap/pop3-proxy: If auth_verbose=yes, log proxy login failures. + deliver: Added -s parameter to autosubscribe to autocreated mailboxes. - message parser fixes - hopefully fixes an infinite looping problem - SORT: One more assert-crashfix when renumbering index sort IDs. - mbox: Saving may have truncated the mail being saved - mbox: Several other bugfixes - mail_full_filesystem_access=yes was broken when listing mailboxes (it still is with maildir++ layout). - maildirlock utility was somewhat broken - zlib plugin: bzip2 support was somewhat broken - NFS: Make sure writing to files via output streams don't assert-crash when write() returns only partial success.

3 6

[Dovecot] Time Moved Backwards Error Keeps Happening
by JackyC＠umac.mo 05 Sep '08

05 Sep '08

Hi all, I am running dovecot version 1.1.1 (dovecot --version) and keeps to have time moved backwards problem. I first found dovecot dead without obvious error message, but see the following when restart dovecot service by # service dovecot restart >Stopping Dovecot Imap: [FAILED] >Starting Dovecot Imap: Warning: Last died with error (see error log for more information): Time just moved backwards by 4398 seconds. This might cause a lot of problems, so I'll just kill myself now. http://wiki.dovecot.org/TimeMovedBackwards [ OK ] I followed the above official wiki link and apply the ntpd service for adjusting the server timestamp. After running the ntpd service, I found the server timestamp drift is only 14.333 microsecond, I think which would be reasonable. But I still get the captioned error. Does anyone have the same experience? BTW, I couldn't find the error log message even I confirmed the info, error and debug log file by visiting this wiki document http://wiki.dovecot.org/Logging, does it really not log at the log file? I can just keep monitoring the log and use the following command to determine whether dovecot is running or not. # service dovecot status Thank you very much! Yours Sincerely, Jacky, Hoi Kei Chan,

2 1

Re: [Dovecot] filename format question
by Giorgenes Gelatti 05 Sep '08

05 Sep '08

> There's no config option for it, but it's theoretically possible to do just about anything. Generally, though, the format of those filenames is defined by the Maildir standard. Changing the filename as you suggest would likely break other mail programs that might access those Maildir folders. > > I suppose the question is: why would you want to change that? My company's current system (unfortunally) uses that non-standard format. The MTA writes in that format. I guess it would require a patch then? tks. gpg

2 1

[Dovecot] filename format question
by Giorgenes Gelatti 05 Sep '08

05 Sep '08

Hello, Is it possible to configure the filename format in dovecot? For example, to change from "unique,W=size:2,FLAGS" to "unique,size.hostname:2,FLAGS_unique2"? Thanks in advance.

2 1

[Dovecot] Integrating Dovecot SASL into Postfix
by Diego Ledesma 04 Sep '08

04 Sep '08

Hello. I have a linux system (Ubuntu 7.04 server edition) running as a mail server with Postfix. SMTP authentication is not configured so users have to be connected to the lan to download/send mails. I´m considering on enabling SMTP authentication and i have heard that by installing Dovecot i can do this pretty straight forward. First of all, some details about how the mail server is configured: - Running Linux OS Ubuntu 7.04 - Currently running Postfix version 2.3.8 - No virtual users or domains . Every system user has a mail account (to create a new mail account i have to create a new system user. I belive this is called PAM, right?). According to postfix´s website the version of postfix i have supports Dovecot 1.0 SASL protocol. What would happen if i try to install Dovecot through apt-get?. I mean, i most definitely get a version of Dovecot above 1.0. Would my postfix still support it?. Before posting this i have posted on the postifx mailing list and they have to told me that after installing Dovecot i don´t need to configure it as a pop/iamp server. How would i accomplish this?. Any help is greatly appreciated. Thanks. Diego.

2 1

[Dovecot] log analyzers
by maximatt 04 Sep '08

04 Sep '08

hi... ¿you have some log analyzer to recommend? (for dovecot obviously) thanks in advance!!!! -- Salu2 ;)

1 0

[Dovecot] Sieve problem with 1.1.2
by justin＠ma3x.net 04 Sep '08

04 Sep '08

Hello, I am new here, so excuse me if i am asking something already asked. I am using dovecot 1.1.2 along with postfix 2.6 and a pgsql backend. So far everything is great, until i wanted to try out the sieve implementation. I am using dovecot for deliver and i have set global_script_path = /home/vmail/globalsieverc The script IS working until a given user defines his own sieve script ( for example ) : require ["fileinto"]; # Move mail from my gmail account to gmail folder if header :contains "From" ["xxxxx(a)gmail.com"] { fileinto "gmail"; } This ( or any other script for all i know ) breaks up the global one, and it stops working. The global script looks like this : require ["fileinto"]; # Move spam to spam folder if header :contains "X-Spam-Flag" ["YES"] { fileinto "spam"; stop; } Am i missing something, or this is the desired behaviour ?

3 3

[Dovecot] Dovecot ManageSieve + ingo or avelsieve
by Olivier Dijoux 03 Sep '08

03 Sep '08

Hi, does anyone got Dovecot ManageSieve and Horde/Ingo working together ? i'm running Dovecot 1.1.2 with managesieve patch (dovecot-1.1.2-managesieve-0.10.3.diff) following intructions at http://wiki.dovecot.org/ManageSieve now my Dovecot have ManageSieve available :-) I've setup Horde/Ingo (ingo-h3-1.1.5-1.el5) when I specify some new filtering rules in Ingo, they are successfully uploaded using managesieve to Dovecot server and seems to be working. But when I logout/login back to Ingo, no rules are visible. Previously defined rules are still working with dovecot (because the ingo.sieve which links to .dovecot.sieve contains them), but Ingo is ignoring them at all. also my Dovecot managesieve setup is working well with avelsieve-1.9.4 plugin for Squirrelmail, but not with latest avelsieve-1.9.7 (see http://article.gmane.org/gmane.mail.squirrelmail.plugins/13818 ) : in avelsieve-1.9.7 same as Ingo, it forget rules ! any suggestion ? Ingo backends.php is : ---- $backends['sieve'] = array( 'driver' => 'timsieved', 'preferred' => 'localhost', 'hordeauth' => true, 'params' => array( // Hostname of the timsieved server 'hostspec' => 'localhost', // Login type of the server 'logintype' => 'PLAIN', // Enable/disable TLS encryption 'usetls' => false, // Port number of the timsieved server 'port' => 2000, // Name of the sieve script 'scriptname' => 'ingo', ), 'script' => 'sieve', 'scriptparams' => array() ); ---- PS : any ManageSieve patch for Dovecot v1.1.3 ? thanks -- Olivier

1 1

[Dovecot] umask and mails
by Nicolas Letellier 03 Sep '08

03 Sep '08

Hello. I would like to have rights like 750 in my mailboxes (in /var/mail/vmails/domain.tld/user). http://wiki.dovecot.org/DovecotServerInstallations/RHEL/2_Users?highlight=(… I see an option called umask (in dovecot.conf). I set umask = 0750 in dovecot.conf. This option add good rights to directories, but not to the mail received (always in 700). Do you have a solution? Thanks. -- - Nicolas.

2 2

[Dovecot] checkpassword migration script in Python
by Dan Udey 03 Sep '08

03 Sep '08

Hey all, First post to the list, so here goes, hope I don't break any rules (I didn't see any rules about not being overly verbose) I spent a long time looking for anything that would help me migrate from our old IMAP server to our new one without a lot of client-side fuss, multiple e-mail accounts, and so on. I find that a lot of our users get confused by having two 'inboxes' in Outlook (one local, unused, and one IMAP), so I figured the easier I could make it, the better. I figured there must be some way to do what I was looking for, but I couldn't find it, so I hacked up a little something to do the job. As the saying goes, it's nasty, brutish, and short, but in my tests it's done everything I needed it to. The problem: Our old mail system is hosted by another company, outsourced before I was hired, so I don't have access to the old user/ passwd database, nor to their e-mail store; thus, I cannot do a clean, simple migration by upgrading in-place as I have done on other servers. The solution IMAP authentication proxying. The idea is that I don't need to know the password, because the user's mail client knows the password, so all I need is for it to tell me, and then I can create their user. That is what this script is for. To use, set up your authentication backend (passdb) first, and then after that section, add a 'passdb checkpassword' section containing this script. Thus, the following will happen. 1. Valid users who log into your system will be authenticated as you would expect. 2. Users who could not be authenticated will fall through to the checkpassword section 3. Checkpassword will look for the user in the password database; if they exist, it is assumed that it is a valid user, but incorrect password, and checkpassword fails the user as well. 4. If the user is not currently in the database, it will initiate an IMAP4 connection to the remote host specified. If it succeeds in logging in to the remote host, then we assume that the user is a valid user and can be migrated to the local server. They are added to the database, along with their password. It then **fails the user's login regardless** 5. It /logs the username and password into the database/ so that another process can use that information to migrate their e-mail over to the new server (not yet implemented). 6. If the IMAP connection fails, the login is failed as well, and dovecot continues as normal until it has exhausted all other passdb backends. Interested? A few things to note about the script: 1. It's a brutal hack. Really, ugly stuff. However, it gets the job done, if your system is similar enough to mine. 2. It only works on MySQL. I only use MySQL in our system, so there's no point for me to add other DBs, nor any way to test. 3. It doesn't support remote servers using SSL. Our current system doesn't use it, so again, it's hard to test. 4. It does not currently migrate mailboxes. I'm working on this (see below). 5. If your schema is at all different from mine, you will likely have to rewrite all of the SQL. There's not much I can do about this. 6. If your backend database doesn't use MySQL, you're largely boned. Exception: rewrite add_user() to do whatever you need to do to add users to your system. 7. The script will **ALWAYS RETURN A FAILED LOGIN TO DOVECOT**. This is because there are too many variables on every configuration, and writing code for all of them is absurd. This way, the user's first login will always fail, and their second login will always succeed. If you want to avoid this, place your normal passdb authentication **both before and after this checkpassword section**. That way, it will check once, fail, pass to checkpassword, and then check again, success. TODO: 1. Make it not ugly. Break more junk off into functions (e.g. IMAP verification) 2. Send the user an e-mail ('Welcome to the server, sorry your mail is gone, we'll fix that soon') 3. Spawn another process to run imapsync in the background to migrate the user's old mailboxes over. This would be very site-dependent, as there are a lot of variables. It might be best done as a cronjob that polls the database every however often (1 minute? 2 minutes?) or a daemon that sits in the background watching the db for changes, or even accepting the data directly. 4. Stop being so verbose in my first postings to mailing lists. 5. Lots of other things. URLS Blah blah blah where's the code. Here you go. Pretty syntax-highlighted version for browsing before you download, in case I'm an evil hacker: http://cdslash.net/temp/python/checkpassword.py Ugly monochrome version for downloading so you don't get line numbers in your junk: http://cdslash.net/temp/python/checkpassword.raw Questions, comments? I probably won't be on the list very long, so if you want to ask something or have a suggestion, feel free to let me know by e-mail at the address listed in the file's license notification. Alternately, find me on Freenode, occasionally in #dovecot or always in #macosx, as Darien, or some variant thereof. PS: The code is licensed under a boilerplate MIT license lifted from the OSI license page. If you want it under a different license, let me know. ;) Thanks, Dan

1 0

[Dovecot] authorizing users
by Wade Smart 03 Sep '08

03 Sep '08

Im trying to clarify if I understand correctly about authorizing users. "The simplest login method is sending the user login info in plain text and allowing access only to users that already have UNIX access (ie. in /etc/passwd) to the machine dovecot is running on." Im using fetchmail postfix dovecot on my own personal computer to get my mail from two servers. What Im wanting to understand is, is this saying that since I am already a user on my own system, that by using /etc/passwd that I would use my username and password in say thunderbird to login to dovecot to get my mail?

2 1

[Dovecot] Dovecot-1.1.2 segfaults in mail_cache_header_fields_get_offset
by Mike Abbott 03 Sep '08

03 Sep '08

Dovecot 1.1.2 crashes reliably for me now on a Mac OS X machine. Here's some info: --- Telnet session --- $ telnet localhost 143 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK Dovecot ready. a login user1 password a OK Logged in. b select inbox * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 1 EXISTS * 1 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1218731580] UIDs valid * OK [UIDNEXT 2] Predicted next UID b OK [READ-WRITE] Select completed. c fetch 1 rfc822.size Connection closed by foreign host. --- Error log --- dovecot: Aug 29 11:24:30 Info: imap-login: Login: user=<user1>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured dovecot: Aug 29 11:24:33 Error: IMAP(user1): Corrupted transaction log file /Volumes/Spool/spool/user1/mail/dovecot.index.log: hdr.size too large (75497472) dovecot: Aug 29 11:24:33 Warning: IMAP(user1): fscking index file / Volumes/Spool/spool/user1/mail/dovecot.index dovecot: Aug 29 11:24:48 Error: child 66917 (imap) killed with signal 11 --- Backtrace --- mail_cache_header_fields_get_offset + 214 mail_cache_header_fields_read + 37 mail_cache_open_and_verify + 167 mail_cache_field_exists + 77 index_mail_set_seq + 306 index_storage_search_next_nonblock + 464 mailbox_search_next + 52 imap_fetch + 345 cmd_fetch + 639 client_command_input + 33 client_command_input + 463 client_handle_input + 242 client_input + 151 io_loop_handler_run + 272 io_loop_run + 39 main + 1671 start + 52 If I do the exact same telnet all over again, the imap process crashes in the same place, but without reporting the "fscking index file" error first. Attached are all the post-fsck dovecot* files from the user's inbox maildir. For other users I see this error before imap crashes: dovecot: Aug 29 11:45:23 Error: IMAP(user2): Rebuilding index file / Volumes/Spool/spool/user2/mail/dovecot.index: CPU architecture changed Attached are pre- and post-rebuild copies of that user's dovecot* files, and also a copy from after a second telnet session which also crashed. It's possible this is a 32/64-bit incompatibility issue (imap is a 64- bit program for me; mail might have been delivered by a 32-bit deliver or previously read by a 32-bit imap) but more likely the dovecot* files are just hosed in some way. I can provide more information if you ask soon, but I can't keep this server broken for too long.

2 3

[Dovecot] Authentication problems
by Rodti MacLeary 02 Sep '08

02 Sep '08

Hi there, I'm in a bit of a dilemma and wonder if anyone can help. Over the weekend I bought a new dedicated server and moved my mail/web over to it. I'd used the Sarge[1] tutorial at workaround.org for the old server and as I'd wanted to move to Dovecot for a while I decided to use their Etch[2] tutorial for the new one. For the most part everything's working nicely, but I seem to be having problems with (mostly non-SSL) SMTP authentication. In this install Postfix passes SASL authentication to Dovecot. For most clients using SSL this works fine, but as soon as SSL is off it fails. This is despite having disable_plaintext_auth set to 'no'. Furthermore it appears that some clients w/SSL are also failing. Outlook being the major culprit. I'm completely stumped. I've pasted a copy of the output from dovecot -n below. Thanks in advance! Rodti [1] http://workaround.org/articles/ispmail-sarge [2] http://workaround.org/articles/ispmail-etch --------------------------------------------- # 1.0.13: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/home/vmail/%d/%n/Maildir mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv namespace: type: private separator: . prefix: INBOX. inbox: yes auth default: mechanisms: plain login cram-md5 passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail

3 5