- dovecot - dovecot.org

[Dovecot] Per user mailbox quota
by Ranjith Kumar 09 Jan '08

09 Jan '08

Hi, How do I setup per user mailbox quota? I am using /etc/passwd database. Thanks BAT

3 2

[Dovecot] Sendmail, procmail, dovecot and quota
by papi mac 09 Jan '08

09 Jan '08

I have Fedora 7 from a standard installation running sendmail, procmail and dovecot 1.0 installed on a single partition. I now need to set up mail quotas for most of the users but not all. Just protecting /var/spool/mail/$LOGNAME is probably good enough for me. Since I just want mail quotas and the installation is on just 1 partition I don't have an easy way to use file system quotas. By reading through the dovecot documentation and list archives I have the feeling that this is possible with the versions and setup I have. I would probably need a main line like this (apart from other lines) per user mailbox that needs to be managed: dirsize:/var/spool/mail/joe-user:storage 10240 to give joe-user a 10 mb limit. Since this server is in production I don't have the luxury of experimenting (extensively) on it. I have a question though that I have not been able to answer yet. If the flow of mail goes from sendmail to procmail to the mailbox, how is it possible for dovecot to implement quotas on the inbox? Or would dovecot write something there that procmail has to honor? Is dovecot the way to do this? Am I misunderstanding what "quotas" mean in dovecot? Thanks for any clues. --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search.

4 7

[Dovecot] maildir_uidlist_create assertion failure
by Andrew Garner 09 Jan '08

09 Jan '08

I've been getting the following error fairly often, which tends to result in a corrupted dovecot-uidlist. dovecot: IMAP(example(a)example.com): file maildir-uidlist.c: line 1009 (maildir_uidlist_recreate): assertion failed: (file_size == (uoff_t)st.st_size) dovecot: IMAP(example(a)example.com): Raw backtrace: imap [0x80cb740] -> imap [0x80cb64a] -> imap [0x8070e58] -> imap(maildir _uidlist_sync_deinit+0xe8) [0x8072d18] -> imap [0x806e9e2] -> imap(maildir_storage_sync_init+0x66) [0x806edf6] -> imap(imap_sync_init+0x4a) [0x80657da] -> ima p(cmd_sync+0x9d) [0x806590d] -> imap(cmd_store+0x33d) [0x805e1ed] -> imap(cmd_uid+0x57) [0x805e737] -> imap [0x805f009] -> imap [0x805f0ae] -> imap(client_inp ut+0x65) [0x805f6c5] -> imap(io_loop_handler_run+0x162) [0x80d3022] -> imap(io_loop_run+0x28) [0x80d2368] -> imap(main+0x4ab) [0x806723b] -> /lib/tls/i686/cmo v/libc.so.6(__libc_start_main+0xc8) [0xb7dfdea8] -> imap [0x8059551] dovecot: child 17997 (imap) killed with signal 6 dovecot: IMAP(example(a)example.com): rename(/home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist.…, /home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist) failed: No such file or directory dovecot: IMAP(example(a)example.com): unlink(/home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist.… failed: No such file or directory dovecot: IMAP(example(a)example.com): rename(/home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist.…, /home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist) failed: No such file or directory dovecot: IMAP(example(a)example.com): unlink(/home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist.… failed: No such file or directory Followed sometime later by: dovecot: IMAP(example(a)example.com): Invalid data in file /home/vmail/domains/o/example.com/U/example/Maildir/dovecot-uidlist Example of some corruption: ~/Maildir/dovecot-uidlist ... 7879 W193997 1195126451.4452.server023,S=191173:2,aopr :1195126451.4452.server023,S=191173:2,aopr ... 9628 W665454 1197354124.5254.server019,S=651976:2,pr <A0>% :1197354124.5254.server019,S=651976:2,pr # dovecot -n # 1.1.beta11: /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login verbose_proctitle: yes mail_uid: 89 mail_gid: 89 mail_location: maildir:~/Maildir mail_debug: yes mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): fts fts_squat mail_plugins(imap): fts fts_squat mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap/ mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap/ mail_plugin_dir(pop3): /usr/lib/dovecot/modules/ imap_client_workarounds(default): delay-newmail imap_client_workarounds(imap): delay-newmail imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %f pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: login plain cram-md5 digest-md5 username_format: %Lu verbose: yes debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth user: postfix group: postfix master: path: /var/run/dovecot/auth-master user: vmail group: vmail plugin: quota: maildir quota_rule: *:storage=102400:messages=30000 fts: squat

5 9

[Dovecot] Dovecot auth GSSAPI
by Eduardo Sachs 09 Jan '08

09 Jan '08

Hi, I have Heimdal Kerberos with authentication in my Samba PDC, Postfix and OpenLDAP, it is perfect. But, I have problem with authentication GSSAPI of Dovecot. I install a service ticket of the form imap/mailserver.domain.com@REALM, imap/mailserver@REALM, pop/mailserver.domain.com@REALM and pop/mailserver@REALM and /etc/krb5.keytab for this services tickets. Debug in my messages log: Jan 9 15:14:32 mailserver dovecot: auth(default): client in: AUTH^I1^IGSSAPI^Iservice=IMAP^Ilip=192.168.0.71^Irip=192.168.0.212 Jan 9 15:14:32 mailserver dovecot: auth(default): gssapi(?,192.168.0.212): Obtaining credentials for imap@mailserver Jan 9 15:14:32 mailserver dovecot: auth(default): gssapi(?,192.168.0.212): While importing principal name: An invalid name was supplied Jan 9 15:14:33 mailserver dovecot: auth(default): client out: FAIL^I1^Itemp Jan 9 15:14:33 mailserver dovecot: imap-login: Aborted login: method=GSSAPI, rip=192.168.0.212, lip=192.168.0.71 Someone knows solve this problem? Or, it is a bug? Thanks!!!

1 0

[Dovecot] dovecot upgrade
by Paul A 08 Jan '08

08 Jan '08

Hi, I'm currently using Dovecot version 1.0 and I want to update it to the latest version. I know from version .99 to version 1.0 I had to change a few things on the dovecot config. When compiling the latest stable version should I just be able to use the same config I'm using for version 1.0 without making any changes ? Thank you Paul

3 3

[Dovecot] Dovecot too many open files???
by Tim Tyler 08 Jan '08

08 Jan '08

Dovecot experts, We just recently deployed Dovecot 1.0.rc15 on a Redhat 5 system. I have over 1400 users. At first it appeared to work fine. But soon, we had complaints of students that couldn't retrieve their email. I looked in the logs and found this error. Jan 7 22:27:31 stu dovecot: auth(default): pam(pucklisl,<http://144.89.40.6>144.89.40.6): pipe() failed: Too many open files We are running Dovecot to authenticate via pam which authenticates ldap. Below is the output of [root@stu ~]# dovecot -n # /etc/dovecot.conf listen: * ssl_cert_file: /etc/mail/certs/server.pem ssl_key_file: /etc/mail/certs/server.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_process_size: 512 login_max_processes_count: 32 mail_location: mbox:%h/mail:INBOX=/var/spool/mail/%u mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /etc/custom-pop3.sh mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: passdb: driver: pam userdb: driver: passwd Any solutions for this problem? Tim Tyler Network Engineer - Beloit College tyler(a)beloit.edu

2 3

[Dovecot] (somewhat ot?) purging old maildir messages
by Matt LaPlante 08 Jan '08

08 Jan '08

I'm using Dovecot (+postfix) to host some personal imap accounts on a private server (Maildir format). I've got one account that receives mostly automated mails, and I want to be able to purge messages beyond a given date (say 30 days). I know that since maildir uses flat files, I can literally just delete messages doing something similar to the following with bash: for i in $(find /var/spool/vmail/host1/user/cur/ -mtime +30); do rm $i done I dislike this approach for a few reasons. First, and most plainly, it seems crude. When running complex server software, its rarely a good idea in the field of systems administration to be bluntly deleting files out from under the running applications. It feels wrong. How does this affect dovecot's monitoring of the files and indexing? What if the files happen to be open in an email client? Etc. Emotions aside, I also very much dislike running an automated 'rm' that has the power to wipe out a lot of my email if something goes pearshaped with the script. I can think of several possible solutions that don't require subversive operations on the maildirs, but I've never used them and therefore don't know if they're actually feasible: - Use a tool designed to manipulate maildirs. Something akin to postfix's postqueue and postsuper tools come to mind, but I don't know if such an app exists. - Use a setting within dovecot that expires old maildir data. As I understand it this will be available in 1.1 (yay!); unfortunately that's not an option for me until 1.1 is available as stable in my server os. - Use a scriptable mua that has the capability to check mail under said account and automatically delete based on age. I know very little of tools in this area, so again I don't know if such an application exists. Any pointers you might have would be much appreciated. Thanks, Matt

4 4

[Dovecot] Problem with passwords surrounded by curly braces
by Frank Kintrup 07 Jan '08

07 Jan '08

Hello, one of my users set his password to something surrounded by curly braces, and promptly all access to his mailbox was refused. After looking through the logs I found an entry "Unknown password scheme xxxx", where "xxxx" is the user's password, but without the curly braces. I then browsed through the documentation and there was explained that it is possible to prefix the password with the password scheme in curly braces, like "{PLAIN}xxxx" where xxxx is the password itself. Manually altering the users password in the database to "{PLAIN}xxxx" (where "xxxx" is the user's password WITH curly braces) fixed this problem for me at this time, but the time a user chooses such a strange password I would have to edit the table again. So in my opinion the {SCHEME}-prefix is not a useful thing. Why would anyone need it, anyway? Shouldn't all passwords have the same scheme which is set in the dovecot.conf file once? If the feature is indeed used: with a database lookup it should be replaced by an optional database field or, if that's not possible, it should be possible to disable this feature from the config file. Frank

4 3

[Dovecot] What's the difference between mbox and maildir
by Andrew Falanga 07 Jan '08

07 Jan '08

I'm a little confused about some of these terms. What is: .imap/.imap/ (other than directories) mbox INBOX (I think I have this one) maildir ??????? I'm not sure how all of these things work together. Thanks, Andy

2 2

[Dovecot] Please help me resolve why mail isn't being delivered to virtual users
by Andrew Falanga 07 Jan '08

07 Jan '08

follow up: I forgot to mention, that I discovered my system doesn't appear to have procmail on it. So, I'm not sure what must be done for delivery of mail concerning that "LDA/Sendmail" dovecot WIKI page. Andy

1 0

[Dovecot] assertion with outlook
by Guenther Sommer 07 Jan '08

07 Jan '08

i saw two crashes in my syslog with dovecot, and google did not report any known problems. i have no problems using dovecot, thus bugreport is just for information. following information: ubuntu gutsy gibbon server amd64 ext3 outlook 2003 & 2007, just retrieving mails. mails have been migrated via imapsync 2 days before to this server. dovecot is imap-server and LDA. has been seen with two different users, following syslog entries: Jan 7 18:27:01 siege dovecot: IMAP(userA): file strfuncs.c: line 165 (p_strndup): assertion failed: (max_chars != (size_t)-1) Jan 7 18:27:01 siege dovecot: IMAP(userA): Raw backtrace: imap [0x46372e] -> imap [0x46349c] -> imap(t_strndup+0) [0x470cf0] -> imap(cmd_create+0xd1) [0x4142c1] -> imap [0x4178f7] -> imap [0x417989] -> imap(_client_input+0x6d) [0x417fbd] -> imap(io_loop_handler_run+0x101) [0x468e61] -> imap(io_loop_run+0x18) [0x467f28] -> imap(main+0x3f2) [0x41f6c2] -> /lib/libc.so.6(__libc_start_main+0xf4) [0x2b974f225b44] -> imap [0x4132e9] Jan 7 18:27:01 siege dovecot: child 27443 (imap) killed with signal 6 Jan 7 18:35:36 siege dovecot: IMAP(userB): file strfuncs.c: line 165 (p_strndup): assertion failed: (max_chars != (size_t)-1) Jan 7 18:35:36 siege dovecot: IMAP(userB): Raw backtrace: imap [0x46372e] -> imap [0x46349c] -> imap(t_strndup+0) [0x470cf0] -> imap(cmd_create+0xd1) [0x4142c1] -> imap [0x4178f7] -> imap [0x417989] -> imap(_client_input+0x6d) [0x417fbd] -> imap(io_loop_handler_run+0x101) [0x468e61] -> imap(io_loop_run+0x18) [0x467f28] -> imap(main+0x3f2) [0x41f6c2] -> /lib/libc.so.6(__libc_start_main+0xf4) [0x2ad667dfeb44] -> imap [0x4132e9] Jan 7 18:35:36 siege dovecot: child 27902 (imap) killed with signal 6 user authentifaction is done against local unix users. # 1.0.5: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S ssl_cert_file: /etc/ssl/certs/mail.pem ssl_key_file: /etc/ssl/private/mail.key login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_extra_groups: mail mail_location: maildir:~/Maildir imap_client_workarounds: outlook-idle netscape-eoh tb-extra-mailbox-sep namespace: type: private prefix: INBOX. inbox: yes auth default: passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix with kind regards, guenther sommer.

2 1

[Dovecot] What would you tell the CIO in an "ABCs of Email" overview?
by Esther Schindler 07 Jan '08

07 Jan '08

One of the key points that came up when I researched and wrote the "Five Things CIOs Should Know about Fighting Spam" article (http:// www.cio.com/article/28830) was that they should know the basics of how email works. Otherwise, said plenty of techies, the CIO won't have the first idea of what the email admin is complaining about. So I'm going to do my part. I'm going to write an "ABCs of Email" article (to accompany the many other ABCs articles we have on CIO.com, at http://www.cio.com/article/40242 ). I'd like your input on the topics that should be included, keeping in mind the fact that the target reader is a CIO, IT manager, or someone who wants to understand the basics, *not* actively get involved in email management. You don't need to write an essay for me or inundate me with links (though hey, if you want to make my life easier I shall not complain). What I'm looking for, primarily, are the categories of information that I should cover. In other words, if your CIO had an email ephiphany and asked you to give a half-hour presentation, what would you include? This won't be an "Expert says..." article nor will it be "Geek on the street says...." I intend to compile and research the "least you need to know" for the not-necessarily-techie bosses out there. And hopefully the end result will be that you have one less dumb question to deal with in your life. So: any suggestions? (You can reply privately if you prefer.) Esther Schindler senior online editor, CIO.com her blog: http://advice.cio.com/taxonomy/term/34

2 3

Re: [Dovecot] v1.1.beta13 released
by Bruce Bodger 06 Jan '08

06 Jan '08

On Jan 6, 2008, at 9:51 AM, Timo Sirainen wrote: >>>> What plugins do you use? >> >> mail_log and cmusieve (dovecot-sieve-1.1.3) > > Well, I can't reproduce this with my setup, so there must be something > special that's causing this. Unless it's your client that creates the > mailbox itself? Perhaps you're right. I just tried using Thunderbird (Mac) and it does not exhibit this behavior. Apple Mail has an option, "Automatically synchronize changed mailboxes" which I do NOT have checked so the problem must be within Apple Mail as you surmised. In fact, Apple Mail is now displaying public/INBOX in it's list of mailboxes even though it hasn't been created under ~/Maildir/control/ public G518X2:~/Maildir/control/public root# ls -la total 8 drwx------ 5 bb admin 170 Jan 6 10:20 . drwx------ 3 bb admin 102 Jul 28 22:38 .. drwx------ 4 bb admin 136 Jan 6 09:54 .HAM drwx------ 4 bb admin 136 Jan 6 10:10 .SPAM -rw------- 1 bb admin 9 Sep 9 07:06 subscriptions ...and INBOX in not listed in 'subscriptions'. Sorry for the goose chase, unless you like goose, of course :-) B. Bodger

1 0

[Dovecot] v1.1.beta13 released
by Timo Sirainen 06 Jan '08

06 Jan '08

http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta13.tar.gz http://dovecot.org/releases/1.1/beta/dovecot-1.1.beta13.tar.gz.sig Changes since beta12: - Half of LDAP code was rewritten to fix reconnect/queuing problems. I did test that the new code works with and without auth binds, but be careful. - \Recent flags should finally work correctly with maildir. - last_used field wasn't updated for cache fields that were permanently cached. This caused them to be dropped after a month. TODO for RC1: - When pipelining commands, do only one sync after all of them. Besides improving performance, this fixes some rare problems when multiple commands are running simultaneously. - SEARCH/SORT: Replace invalid input with unicode "replacement character" instead of just skipping it. - Squat: Handle expunges. NFS support. - Fix Lucene support.

4 7

[Dovecot] imap cores
by Anil 06 Jan '08

06 Jan '08

Experts, (Now that I am able to run imap...) Here's what I am seeing with imap, it seems to die in the latest nightly. (tss, I am still trying to get dbx to work properly, maybe it won't, but I got some more details here.) ... 2 select "INBOX" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 1 EXISTS * 0 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1199514743] UIDs valid * OK [UIDNEXT 2] Predicted next UID 2 OK [READ-WRITE] Select completed. 3 UID fetch 1 ( BODY.PEEK[HEADER.FIELDS (From)]) Connection to mail closed by foreign host. openat(-3041965, "/var/mail/apps/domain/admin/Maildir/cur", O_RDONLY|O_NDELAY|O_LARGEFILE) = 9 fcntl(9, F_SETFD, 0x00000001) = 0 fstat64(9, 0x080474C0) = 0 stat64("/var/mail/apps/domain/admin/Maildir/cur", 0x080475C0) = 0 time() = 1199564680 getdents64(9, 0xFEFA4000, 8192) = 112 getdents64(9, 0xFEFA4000, 8192) = 0 close(9) = 0 fcntl(6, F_SETLK64, 0x08047680) = 0 lstat64("/var/mail/apps/domain/admin/Maildir/dovecot-uidlist.lock", 0x080476C0) = 0 unlink("/var/mail/apps/domain/admin/Maildir/dovecot-uidlist.lock") = 0 open64("/var/mail/apps/domain/admin/Maildir/cur/1199514786.M867961P7368.vds5,W=1325:2,", O_RDONLY) = 9 fstat64(9, 0x080477A0) = 0 pread64(9, " R e t u r n - P a t h :".., 4096, 0) = 1298 pread64(9, " R e t u r n - P a t h :".., 4096, 0) = 1298 close(9) = 0 write(2, "01 P f i l e i n d e x".., 82) = 82 getcontext(0x08047510) open("/proc/self/as", O_RDONLY) = 9 close(9) = 0 write(2, "01 E R a w b a c k t r".., 18) = 18 sigaction(SIGABRT, 0x00000000, 0x08047710) = 0 sigaction(SIGABRT, 0x08047650, 0x080476D0) = 0 schedctl() = 0xFED32000 lwp_sigmask(SIG_SETMASK, 0x00000000, 0x00000000) = 0xFFBFFEFF [0x0000FFFF] lwp_kill(1, SIGABRT) = 0 Received signal #6, SIGABRT [default] siginfo: SIGABRT pid=3257 uid=500 code=-1 This is all I can seem to get with dbx: program terminated by signal ABRT (Abort) 0xfee55687: __lwp_kill+0x0007: jae __lwp_kill+0x15 [ 0xfee55695, .+0xe ] (dbx) where =>[1] __lwp_kill(0x1, 0x6), at 0xfee55687 [2] _thr_kill(0x1, 0x6), at 0xfee52dee [3] raise(0x6), at 0xfee011bb [4] abort(0x817e3d8, 0x817e3d8, 0xfee7f5b8, 0x816e898, 0xffffffff, 0x81759e0), at 0xfede15d9 (dbx) # pstack core.imap.3479 core 'core.imap.3479' of 3479: imap fee55687 _lwp_kill (1, 6) + 7 fee011bb raise (6) + 1f fede15d9 abort (817e3d8, 817e3d8, fee7f5b8, 816e898, ffffffff, 81759e0) + cd 08118884 i_internal_fatal_handler () + 54 What do you think?

1 1

[Dovecot] deliver fails - RFE
by Anil 06 Jan '08

06 Jan '08

deliver has suid: -rwsr-xr-x 1 root root 1892044 Jan 5 19:21 deliver Jan 5 23:11:02 vds5 deliver(admin(a)domain.com): [ID 702911 mail.error] stat(/var/mail/apps/domain.com/admin/Maildir/tmp) failed: Permission denied The above mentioned directory has these permissions: drwx------ 3 vmail vmail 3 Jan 5 19:15 /var/mail/apps drwx------ 3 vmail vmail 3 Jan 5 19:15 /var/mail/apps/domain.com drwx------ 3 10001 10001 3 Jan 5 19:25 /var/mail/apps/domain.com/admin drwx------ 6 10001 10001 9 Jan 5 23:05 /var/mail/apps/domain.com/admin/Maildir/ drwx------ 2 10001 10001 2 Jan 5 19:03 /var/mail/apps/domain.com/admin/Maildir/tmp It seems deliver needs the /var/mail/apps and the /var/mail/apps/domain.com to be 755. Can Dovecot do this automatically when it creates these directories? (/var/mail/apps, /var/mail/apps/domain.com)

1 0

[Dovecot] Upgrading a live running dovecot - how?
by Daniel Watts 05 Jan '08

05 Jan '08

Hi Guys, This has bitten us twice now. We're running Gentoo and emerge (ie compile) a new version of Dovecot thinking we can finish that then restart Dovecot in our own time. It seems that Dovecot immediately starts to use the newly compiled Dovecot binary and we get version mismatch errors preventing access. Would be good if Dovecot behaved in such a way that it kept on using the old version (held in memory) until it was restarted where it then loaded the new version. Dan

3 2

[Dovecot] running imap command line
by Anil 05 Jan '08

05 Jan '08

I am trying to debug some core dump problems. I should be able to run imap by itself right? How to fix? # ./imap imap(root): Fatal: setgroups() failed: Too many extra groups I am using latest nightly code.

3 5

[Dovecot] How to use deliver to deliver to virtual users
by Andrew Falanga 05 Jan '08

05 Jan '08

Hi, Ok, here's my setup, each virtual user has a home directory as follows: /virtusers/<v_userid> and per the INBOX directive in the dovecot.conf file I also have a file as follows: /var/mail/<v_userid> Now, I've followed the directions as outlined here: http://wiki.dovecot.org/LDA/Sendmail But every time I send mail to one of my virtual users, I get this message The original message was received at Sat, 5 Jan 2008 14:22:51 -0700 (MST) from wa-out-1112.google.com [209.85.146.183] ----- The following addresses had permanent fatal errors ----- /var/mail/jdunkin (reason: Can't create output) (expanded from: <jdunkin(a)whitneybaptist.org>) ----- Transcript of session follows ----- 550 5.0.0 /var/mail/jdunkin... Can't create output What could I be missing? Andy

1 0

[Dovecot] help using sendmail LDA
by Anil 05 Jan '08

05 Jan '08

I am stuck. I get nothing in the logs (about deliver). Sendmail complains about "User unknown". I am not sure I have my sendmail.mc configured right, can someone confirm or give me some sample config files that make use of Dovecot+LDAP and sendmail LDA? Dovecot is running as root. I am a little confused, so the auth-master is not even needed? (the whole socket listen {}, since I am using static userdb and the user information was already found at authentication/login) Thank You! # 20080102: /usr/local/dovecot/etc/dovecot.conf listen: *:143 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_log_format_elements: user=<%n@%d> method=%m rip=%r lip=%l %c login_max_connections: 64 max_mail_processes: 128 mail_location: maildir:~/Maildir mail_debug: yes auth default: verbose: yes debug: yes passdb: driver: ldap args: /usr/local/dovecot/etc/dovecot-ldap.conf userdb: driver: static args: uid=vmail gid=vmail home=/var/mail/apps/%d/%n socket: type: listen master: path: /var/run/dovecot-auth-master mode: 384 user: vmail group: vmail My sendmail.mc file: define(`confFALLBACK_SMARTHOST', `mailhost$?m.$m$.')dnl define(`LOCAL_MAILER_PATH',`/usr/local/dovecot/libexec/dovecot/deliver') define(`LOCAL_MAILER_FLAGS',`DFMPhfnu9') define(`LOCAL_MAILER_ARGS',`deliver -d $u') MAILER(`local')dnl MAILER(`smtp')dnl LOCAL_NET_CONFIG R$* < @ $* .$m. > $* $#esmtp $@ $2.$m $: $1 < @ $2.$m. > $3

2 3

[Dovecot] FETCH for mailbox INBOX UID 39641 got too little data: 4823 vs 4825
by Mikhail Teterin 04 Jan '08

04 Jan '08

Whenever I try to access an e-mail in the middle (rather than at the end) of the mailbox, my mail-client (KMail) gets an error a message like this is logged in the maillog: IMAP(mi): FETCH for mailbox INBOX UID 39641 got too little data: 4823 vs 4825 IMAP(mi): Disconnected: Disconnected The actual numbers vary, but it is always X vs X+2 The problem started when I upgraded to 1.0.8. Unfortunately, it is still here with 1.0.9. The mailbox in question is the standard Unix mbox (/var/mail/mi in my case). The server runs FreeBSD/amd64. Please, advise. Thanks! -mi

5 11

[Dovecot] backup dovecot
by Nikolay Shopik 04 Jan '08

04 Jan '08

What is correct way to backup dovecot store? Is am I right what is just enough to copy all maildir and my configuration. So in case failure I can just prepare new machine copy config, maildirs and I'm good to go with this.

7 11

[Dovecot] Optimizing POP3 performance?
by Sebastian Färber 04 Jan '08

04 Jan '08

Hello, I recently migrated to Dovecot from Courier-IMAP and i'm very happy with the IMAP Performance and Dovecot in general. The server is running qmail-ldap and i'm still using the qmail pop3 daemon for the POP3 users. Because i want to get rid of qmail completely (switching to exim) i just tried to replace the qmail pop3 daemon with dovecot too. Immediately after the migration the server became basically unusable because of the high I/O Load caused by the dovecot pop3 daemon. I did some debugging and it looks like dovecot opens every old mail in a users maildir and wants to create it's index files etc. I tried running dovecot pop3 with and without "in memory" indexes but this didn't change anything. Is it possible to disable the indexing of the old e-mails completly for pop3? I understand that dovecot is primarily an IMAP Server but i didn't expect the POP3 Performance to be that bad compared to the qmail pop3 daemon (which is very very basic i have to admit). Is there anything i may have overlooked which helps with the POP3 Performance, any patches that disable the unnecessary indexing etc.? If not, what do you guys recommend and use as a pop3 daemon that is fast and stable? I'm using dovecot 1.0.2 (i checked the ChangeLog, doesn't look like upgrading would give better pop3 performance?) and the relevant pop3-config is: mail_location: maildir:~/Maildir:INDEX=MEMORY mail_debug: yes dotlock_use_excl: yes maildir_copy_with_hardlinks: yes mail_executable: /usr/local/dovecot/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/dovecot/lib/dovecot/pop3 pop3_enable_last: yes pop3_uidl_format: %f pop3_client_workarounds: outlook-no-nuls oe-ns-eoh Any hint in the right direction is greatly appreciated Regards, Sebastian Faerber

2 2

[Dovecot] Homedir permissions problems with LDAP
by "Fábio M. Catunda" 04 Jan '08

04 Jan '08

Sorry, my previous message entered like a reply, so I'm sending again to keep the list in order. Hi, I'm using dovecot 1.0.5-1 (debian stable) and I'm trying to build a virtual host machine with ldap. In my dovecot-ldap.conf thats what I have: uris = ldap://<ldapserver>/ dn = cn=Manager, dc=domain, dc=com, dc=br dnpass = <ultra secret passwd> sasl_bind = no tls = no ldap_version = 3 base = ou=Users, dc=domain, dc=com, dc=br deref = never scope = subtree user_attrs = homeDirectory=homeDirectory user_filter = (&(mail=%u)) pass_attrs = mail=user,userPassword=password pass_filter = (&(mail=%u)) default_pass_scheme = CRYPT user_global_uid = 107 user_global_gid = 109 But I don't want to read homeDirectory from LDAP, so I have the following in dovecot.conf mail_location = maildir:/var/virtual/%d/%n/ The question is when I try to log into imap I receive the following error: dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/expunged/cur) failed: Permission denied dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/deleted/cur) failed: Permission denied dovecot: 2008-01-03 10:03:55 Error: IMAP(magalhaes(a)fmcs.com.br): mkdir(/HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB/deleted/expunged/cur) failed: Permission denied (I'm using lazy_expunge too) I can log in and etc, but this is strange for me, why do I receive this Permission denied message? The directory /var/virtual/<domain>/<user>/ is owned by uid 107 and gid 109, so, i believe thats ok. My homedir in ldap is /home/samba/<user> , so I changed tried to chown 107:109 too but I still get this error. Is there a way for me to know what is the full path that dovecot is trying to use? HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB is no helping me too much! Oh, I imagine that my lazy_expunge conf may be helpfull: namespace private { prefix = .EXPUNGED/ separator = / location = maildir:~/expunged hidden = yes } namespace private { prefix = .DELETED/ separator = / location = maildir:~/deleted hidden = yes } namespace private { prefix = .DELETED/.EXPUNGED/ separator = / location = maildir:~/deleted/expunged hidden = yes } Thanks for all!

1 1

[Dovecot] Compile error introduced in b13 (Solaris 10)
by mikkel＠euro123.dk 03 Jan '08

03 Jan '08

Any news on the b13 compile issue on Solaris 10 (both Sparc and X86)? Would be nice to know whether it's our own headache or something thats not supposed to be and thus expected to be fixed in the next release. Just to be clear this didn't occur in any other release (I've compiled all previous v1.1 betas on the same setup including b12). Ref.: http://dovecot.org/list/dovecot/2007-December/027702.html http://dovecot.org/list/dovecot/2007-December/027704.html Regards, Mikkel

1 1