- dovecot - dovecot.org

[Dovecot] Error: net_connect(/var/run/dovecot/auth-master) failed: Resource temporarily unavailable
by Maykel Moya 16 Oct '07

16 Oct '07

I'm using deliver (1.0.5) with Postfix (2.1.6). I made a test for a few minutes in a moderated busy server. While most mails was delivered, a lot of them failed with this error: deliver(userfoo): Oct 15 09:58:31 Error: net_connect(/var/run/dovecot/auth-master) failed: Resource temporarily unavailable Sounds to me something like not enough auth-master to answer every concurrent deliver. Any hint? Regards, maykel PD: If there any other info I could give let me know.

2 2

[Dovecot] assertion failure when appending
by Johannes Berg 15 Oct '07

15 Oct '07

I get this assertion failure: file maildir-save.c: line 456 (maildir_save_finish): assertion failed: (ctx->seq != 0) once a while when I APPEND messages to a folder. My plugin doesn't touch the ctx, especially not the internal maildir one, but I have no idea where to start looking. Any hints? johannes

2 5

[Dovecot] (no subject)
by LDB 12 Oct '07

12 Oct '07

Version: 1.0.beta8 Is it possible to listen on just specific IP addresses as opposed a single IP or just all IPs on the same server? Thanks, LDB

3 2

[Dovecot] dovecot 1.1beta2 and dovecot-sieve 1.1.2 - crash in LDA
by Bernhard Schmidt 12 Oct '07

12 Oct '07

Hi, I've upgraded to dovecot 1.1beta2 and the latest dovecot-sieve release yesterday and have one single mail that cannot be delivered repeatedly. Log (reformatted): Oct 12 15:19:19 vs02 deliver(bernilrz): pool_data_stack_realloc(): stack frame changed Oct 12 15:19:19 vs02 deliver(bernilrz): Raw backtrace: /usr/local/libexec/dovecot/deliver(i_syslog_panic_handler+0x1e) [0x47117e] -> /usr/local/libexec/dovecot/deliver [0x470eac] -> /usr/local/libexec/dovecot/deliver [0x47929b] -> /usr/local/libexec/dovecot/deliver [0x46f3e3] -> /usr/local/libexec/dovecot/deliver(buffer_write+0x9d) [0x46f70d] -> /usr/local/libexec/dovecot/deliver [0x469aaf] -> /usr/local/libexec/dovecot/deliver(message_header_decode+0x104) [0x469c14] -> /usr/local/libexec/dovecot/deliver(message_header_decode_utf8+0x4b) [0x469d4b] -> /usr/local/libexec/dovecot/deliver [0x43f3eb] -> /usr/local /libexec/dovecot/deliver(index_mail_get_headers+0x42) [0x4401c2] -> /usr/local/lib/dovecot/lda/lib90_cmusieve_plugin.so [0x2b662df67d87] -> /usr/local/lib /dovecot/lda/lib90_cmusieve_plugin.so [0x2b662df716e8] -> /usr/local/lib/dovecot/lda/lib90_cmusieve_plugin.so(sieve_eval_bc+0x395) [0x2b662df72665] -> /usr/local/lib/dovecot/lda/lib90_cmusieve_plugin.so(sieve_execute_bytecode+0xfa) [0x2b662df77daa] -> /usr/local/lib/dovecot/lda/lib90_cmusieve_plugin.so(cmu_sieve_run+0x318) [0x2b662df689b8] -> /usr/local/lib/dovecot/lda/lib90_cmusieve_plugin.so [0x2b662df66d96] -> /usr/local/libexec/dovecot/deliver(main+0xe74) [0x417d24] -> /lib/libc.so.6(__libc_start_main+0xf4) [0x2b662da15b44] -> /usr/local/libexec/dovecot/deliver [0x416079] All other mails work fine, so there is probably something corner case here. Timo, I'll send you the mail in private. Regards, Bernhard Schmidt

1 1

[Dovecot] Logging client commands (patch)
by Zach Bagnall 12 Oct '07

12 Oct '07

This might be useful to someone so I'll throw it out there. Patch against 1.0.5 adds support for two new configuration params: pop3_debug_client_commands = TOP, RETR, DELE imap_debug_client_commands = FETCH, DELETE Obviously add in whichever ones you're interested in, or none, or comment them out completely. It'll log the appropriate events: Oct 12 18:30:18 kea dovecot: IMAP(zach): Client command: FETCH The parameters are included for POP3 events. Wasn't sure quite how to do the same for IMAP and for my purposes it's not too important so imap command parameters aren't logged. Running smoothly here with a few dozen IMAP and POP3 users. Not suggesting this gets added to the codebase - I just needed it to help debug some other IMAP software and thought it might be useful. Zach.

1 0

[Dovecot] UIDL format for old UW pop3
by Oliver Hookins 11 Oct '07

11 Oct '07

Hi, we're trying to migrate from UW imap 2001a-10, which doesn't seem to use the UIDL format documented in the wiki. It seems to use a 16 character long MD5 hash of something. I've tried configuring Dovecot to do the same but the value comes out differently. The main thing that I can see is getting in the way is that the UIDL format is not documented sufficiently. There is no description of using numbers to restrict the length of the output, and no documentation of special features like X or M. Can someone shed some light on these? -- Regards, Oliver

2 1

[Dovecot] Quota Display with Horde / IMP ( WebMail Client )
by edwardspl＠ita.org.mo 11 Oct '07

11 Oct '07

Dear All, For the Dovecot.conf : protocol imap { mail_plugins = quota imap_quota mail_plugin_dir = /usr/lib/dovecot/imap } plugin { quota = maildir } For /var/spool/mail : -rw------- 1 root root 7168 Sep 24 23:02 aquota.group -rw------- 1 root root 8192 Sep 24 18:05 aquota.user -rw------- 1 edward mail 301709 Sep 24 23:27 edward But the Quota display is un-limited status... So, what mistake about the config ? Mine is FC6 System ! Thanks ! Edward.

3 2

[Dovecot] GSSAPI Cross-Realm Patch
by Zachary Kotlarek 11 Oct '07

11 Oct '07

I've written a GSSAPI cross-realm auth patch for people not lucky enough to have the __gss_userok function, though it should apply pretty cleanly with that patch in place as well. The patch is available at: http://zinux.cynicbytrade.com/svn/servers/dovecot/cross-realm.diff.bz2 It works for me on MIT-kerb, and I tested compilation against heimdal, but I don't have a cross-realm setup to test functionality under heimdal (though I also have no reason to think it wouldn't work). Since neither MIT nor heimdal provide a gss_userok() function, I used the krb5_userok() function. So if you're using a mechanism other than krb5 this won't work. But it's the same thing that OpenSSH and the apps distributed with heimdal do, so it seemed relatively safe. I also choose to append the krb5_userok() check rather than replace the gss_compare_name() check -- that way same-realm auth works for non-krb5 mechanisms, and my new code doesn't get called unless the same-realm check fails. If you don't care about other mechanisms it would be faster to bypass the gss_compare_name() check entirely. If this is something you'd like to mainline I'd be happy to standardize the coding style -- just point me to a style definition document. And if it doesn't hit the mainline I expect to maintain it for the foreseeable future, with updates at the same URL. Zach

1 0

[Dovecot] Dovecot, postifx, virtual domains and deliver, what about luser_relay/fallback_relay?
by Alexander Hoogerhuis 10 Oct '07

10 Oct '07

I've read documentation (obviously not the right parts) and googled, but I can't seem how to solve this simple problem: I have a machine running postfix/dovecot and using virtual domains, delivery happens with dovecot's LDA. I also have an Exchange machine that I have to house some of the users of a given domain. How can I tell either postifx in general or dovecot's LDA that whatever specific user that cannot be found in the virutal setup can be pawned off to a given relay-server which will sort it out? -A

2 1

[Dovecot] FW: IMAP proxy with dovecot and hostname
by Limperis Antonis 10 Oct '07

10 Oct '07

Good morning dovecot users I read in http://wiki.dovecot.org/PasswordDatabase/ExtraFields/Proxy that dovecot need ip address in host field and then "This field is required. Note that currently it's required to use an IP address since no DNS resolving is done.". I use a qmail cluster and Courier IMAP. In this system used the ldap field mailhost for proxy functionality with dns name as value. Is there a plan to add the DNS resolving to dovecot in host field; Is there any patch; Thanks Antonis

3 2

[Dovecot] User database ldap lookups and sasl
by Olivier Castan 10 Oct '07

10 Oct '07

Hello I'm currently trying to use Active Directory with Unix extensions to store UID, GID and homedir and retrieve them with ldap. I don't want to allow anonymous bindings and I would rather not use TLS and manage a PKI. So I'm trying to use SASL to do a Kerberos authentication for Dovecot against AD LDAP. I'm currently getting GSSAPI errors about the lack of "credentials cache". Looking at similar cases where services act as clients, like using nss_ldap for unix host accounts, I understand the credentials cache should be initiated by an external program (cron and startup script), at least with the TGT and maybe the TGS for ldap. Since usually kerberosv5 cache is based on the user id ( /tmp/krb5cc_0 for root) there's an option in ldap.conf (krb5_ccname) to set the filename (/etc/.ldapcache in nss_ldap tutorials) for this cache. Is there any way to do this with dovecot-ldap.conf or should I try to use "auth user" default cache filename ? Thanks in advance

1 0

[Dovecot] SpamAssassin and Public Namespace
by James 10 Oct '07

10 Oct '07

Hi I know i might get flamed for asking this in the dovecot mailing list instead of the spamassassin one but i thought someone might be kind enough to help anyway. TIA I'm trying to do site-wide spam filtering with a public namespace but it's not reading the folder i have in the public namespace This is the public namespace set in my dovecot.conf #public spam folder namespace public { separator = / prefix = Filter/ location = maildir:/home/vmail/domains/Spam/Maildir/ hidden = no } There's also a .Spam and .Non-spam folder created in that directory server:/home/vmail/domains/Spam/Maildir# ls -al total 32 drwxrwxrwx 7 vmail vmail 4096 2007-10-09 10:35 . drwxrwxrwx 3 vmail vmail 4096 2007-10-05 13:23 .. drwx------ 2 vmail vmail 4096 2007-10-09 10:35 cur drwx------ 2 vmail vmail 4096 2007-10-09 10:35 new drwxrwxrwx 5 vmail vmail 4096 2007-10-09 11:20 .Non-Spam drwxrwxrwx 5 vmail vmail 4096 2007-10-09 11:19 .Spam -rw------- 1 vmail vmail 14 2007-10-08 11:58 subscriptions drwx------ 2 vmail vmail 4096 2007-10-09 10:35 tmp I'm trying to use this script to login and get the spam from the public spam folders and send it to spamassassin to learn I've highlighted the important parts There are 13 messages in Spam There are 5 messages in Non-Spam Here's the script: ######################################################################################### #!/usr/bin/perl # # Process mail from imap server shared folder 'spam' & 'not-spam' through spamassassin sa-learn # dmz(a)dmzs.com - March 19, 2004 # http://www.dmzs.com/tools/files/spam.phtml # LGPL # # Things to try if it doesn't work # 1) Turn debug onto 1 and see if you connect to imap server ad get messages (yes i could have made a command line flag, just didn't see the need once I got it working :) # 2) Check your local.cf for spamassassin (in debian it's /etc/spamassassin/local.cf) bayes_path settings. # # Also be sure to check that your spamassassin is truely using the bayes files (-D manual startup of spamd to debug there) # use Mail::IMAPClient; use IO::Socket::SSL; my $debug=1; my $salearn; my $username = 'user'; my $password = 'password'; my $server = 'server.example.com'; my $ssl=new IO::Socket::SSL("$server:imaps"); die ("Error connecting - $@") unless defined $ssl; $ssl->autoflush(1); my $imap = Mail::IMAPClient->new( #Server=> 'imapmailhost:143', Socket => $ssl, User => $username, Password => $password, Debug => $debug ); if (!defined($imap)) { die "IMAP Login Failed"; } # If debugging, print out the total counts for each mailbox if ($debug) { foreach my $foldername ($imap->folders) { my $number_of_messages = $imap->message_count( $foldername ); print $foldername, " is imap folder\n"; }* my $spamcount = $imap->message_count('Filter/Spam');* print $spamcount, " Spam to process\n"; * my $nonspamcount = $imap->message_count('Filter/Non-Spam');* print $nonspamcount, " Notspam to process\n" if $debug; } # Process the spam mailbox *$imap->select('Filter/Spam');* my @msgs = $imap->search("ALL"); for (my $i=0;$i <= $#msgs; $i++) { # I put it into a file for processing, doing it into a perl var & piping through sa-learn just didn't seem to work $imap->message_to_file("/tmp/salearn",$msgs[$i]); # execute sa-learn w/data # if ($debug) { $salearn = `/usr/bin/sa-learn -D --no-sync --showdots --spam /tmp/salearn`; } # else { $salearn = `/usr/bin/sa-learn --no-sync --showdots --spam /tmp/salearn`; } print "-------\nSpam: ",$salearn,"\n-------\n" if $debug; # delete processed message $imap->delete_message($msgs[$i]); unlink("/tmp/salearn"); } $imap->expunge(); $imap->close(); # Process the not-spam mailbox *$imap->select('Filter/Non-spam');* my @msgs = $imap->search("ALL"); for (my $i=0;$i <= $#msgs; $i++) { $imap->message_to_file("/tmp/salearn",$msgs[$i]); # execute sa-learn w/data # if ($debug) { $salearn = `/usr/bin/sa-learn -D --no-sync --showdots --ham /tmp/salearn`; } # else { $salearn = `/usr/bin/sa-learn --no-sync --showdots --ham /tmp/salearn`; } print "-------\nNotSpam: ",$salearn,"\n-------\n" if $debug; # delete processed message $imap->delete_message($msgs[$i]); unlink("/tmp/salearn"); } $imap->expunge(); $imap->close(); $imap->logout(); # integrate learned stuff my $sarebuild = `/usr/bin/sa-learn --sync`; print "-------\nRebuild: ",$sarebuild,"\n-------\n" if $debug; ######################################################################################### Results: server:/home/james# ./DMZS-sa-learn.pl Using Mail::IMAPClient version 2.2.9 and perl version 5.8.8 (5.008008) Spam to process Notspam to process . ------- Spam: Learned tokens from 0 message(s) (1 message(s) examined) ------- Autoloading: UID store +FLAGS.SILENT (\Deleted) . ------- NotSpam: Learned tokens from 1 message(s) (1 message(s) examined) ------- Autoloading: UID store +FLAGS.SILENT (\Deleted) ------- Rebuild: bayes: synced databases from journal in 0 seconds: 4 unique entries (4 total entries) -------

1 1

[Dovecot] Dovecot hanging up with many defunct processes
by Mayank Joshi 09 Oct '07

09 Oct '07

Hi, I am in a very awkward situation and need some kind of immediate fix up. I had installed dovecot in my organization as part of migration of email server. The setup involves sendmail, dovecot (imaps+pop3s) and webmail (squirrelmail) running on apache webserver. All was working fine until one day I found a lot of defunct processes on system related to dovecot. dovecot-auth, imap-login and imap were all defunct. The system is using pam_ldap and nss_ldap to authenticate users to a Windows 2003 Active Directory. Immediate restart of dovecot solved the problem for me that day, however since then it's been about 3 times that I've faced this problem. After visiting various forums I came to know one thing, that it has something to do with pam_ldap and nss_ldap. However with UW-IMAP we were using the same setup and we didn't find any problems there. It would be very kind of you, if you can help me out on this front as apart from these mishaps the mail server is running perfectly fine and we wish to continue using Dovecot for our setup in future as well. Following is the system details: 1) OS: RHEL4 (Kernel - 2.6.9-5.ELsmp) 2) Dovecot: Dovecot (Version - 1.0.3) 3) Following is dovecot configuration: log_path: /var/log/dovecot.log protocols: imaps pop3s ssl_cert_file: /usr/share/ssl/certs/imapd.pem ssl_key_file: /usr/share/ssl/private/imapd.pem login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login max_mail_processes: 10240 mail_location: mbox:~/mail:INBOX=/var/mail/%u mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: pam userdb: driver: passwd 4) Dovecot's PAM file (/etc/pam.d/dovecot) #%PAM-1.0 auth required pam_ldap.so account required pam_ldap.so session required pam_mkhomedir.so skel=/etc/skel umask=0077 session required pam_ldap.so As far as I feel it's problem with pam_ldap not able to authenticate against Windows 2003 Active Directory due to some reason or the other. However I'm not sure why is this happening. Regards, Mayank Joshi.

3 2

[Dovecot] undelete messages?
by Cory Coager 08 Oct '07

08 Oct '07

I'm using the lazy expunge plugin as configured in: http://wiki.dovecot.org/Plugins/Lazyexpunge The page claims users can undelete messages without assistance from a sysadmin. How is this accomplished? When I try to subscribe to the folders under the EXPUNGED namespace, nothing happens. ~Cory Coager

2 4

[Dovecot] global sieve script
by Jorge Salamero Sanz 08 Oct '07

08 Oct '07

hi all, i'm moving from a maildrop+courier setup to lda(sieve)+dovecot setup. with maildrop i had a global filter for all the users, so i could filter and archive into the spam folder spam tagged emails for users without custom filters, including them if they exist: LOGNAME=tolower($LOGNAME) `test -e $LOGNAME` if ( $RETURNCODE != 0 ) { `maildirmake $LOGNAME` `maildirmake $LOGNAME/._spam` } `test -f $LOGNAME/mailfilter` if ( $RETURNCODE == 0 ) { include "$LOGNAME/mailfilter" } if ( /^X-Spam-Status: YES */) { to "$LOGNAME/._spam" } else { to "$LOGNAME/" } how could i get this behaviour with dovecot lda and sieve ? thanks !

3 2

Re: [Dovecot] Moving email from a folder to another using IMAP isvery slow (sometimes)
by Stefano Scalise 08 Oct '07

08 Oct '07

Hi to all, I can confirm that if I downgrade to 1.0.5 version I have no more the slowness problem. Then I think it is a bug introduced in th 1.1.x releases. Stefano. ----- Original Message ----- From: "Stefano Scalise" <s.scalise(a)tno.it> To: "Stefano Scalise" <s.scalise(a)tno.it>; "Timo Sirainen" <tss(a)iki.fi> Cc: <dovecot(a)dovecot.org> Sent: Tuesday, October 02, 2007 12:04 PM Subject: Re: [Dovecot] Moving email from a folder to another using IMAP isvery slow (sometimes) > Hi to all, > > very strange! I tried to debug why imap process takes 100% CPu and it is > very slow when I move an email from an imap folder to another imap folder > and then I typed: > > strace -tt -o /log-imap.txt -p <process number> > > well, during the trace the imap process doesn't crash and it is very fast. > If I stop the tracing, I have again the problem and sometimes the crash of > the process. > > Any help? > Thank you, > Stefano. > > ----- Original Message ----- > From: "Stefano Scalise" <s.scalise(a)tno.it> > To: "Timo Sirainen" <tss(a)iki.fi> > Cc: <dovecot(a)dovecot.org> > Sent: Monday, October 01, 2007 4:21 PM > Subject: Re: [Dovecot] Moving email from a folder to another using IMAP > isvery slow (sometimes) > > >> Sorry, but with the new version (1.1.beta2), I still have the same >> problem of very slowness during moving email between two imap folders. >> What can I do for debugging it? >> Stefano. >> >> ----- Original Message ----- >> From: "Timo Sirainen" <tss(a)iki.fi> >> To: "Stefano Scalise" <s.scalise(a)tno.it> >> Cc: <dovecot(a)dovecot.org> >> Sent: Sunday, September 30, 2007 1:52 PM >> Subject: Re: [Dovecot] Moving email from a folder to another using IMAP >> isvery slow (sometimes) >> >> On Wed, 2007-09-26 at 12:05 +0200, Stefano Scalise wrote: >>> Update to the problem: >>> >>> I tried to stress the server with many moving and I received: >>> >>> Sep 26 10:56:40 sirio3 dovecot: IMAP(<email_address>): Trying to >>> allocate 0 >>> bytes >> >> This should fix it: http://hg.dovecot.org/dovecot/rev/c6b85cf1e63a >> >> I'll probably make a beta2 release today after fixing several other >> things. >> >> >

1 0

[Dovecot] User database ldap lookups and sasl
by olivier castan 08 Oct '07

08 Oct '07

Hello I'm currently trying to use Active Directory with Unix extensions to store UID, GID and homedir and retrieve them with ldap I don't want to allow anonymous bindings and I would rather not use TLS and manage a PKI. So I'm trying to use SASL to do a Kerberos authentication for Dovecot against AD LDAP. I'm currently getting GSSAPI errors about the lack of "credentials cache". Looking at similar cases where services act as clients, like using nss_ldap for unix host accounts, I understand the credentials cache should be initiated by an external program (cron and startup script), at least with the TGT and maybe the TGS for ldap. Since usually kerberosv5 cache is based on the user id ( /tmp/krb5cc_0 for root) there's an option in ldap.conf (krb5_ccname) to set the filename (/etc/.ldapcache in nss_ldap tutorials) for this cache. Is there any way to do this with dovecot-ldap.conf or should I try to use "auth user" default cache filename ? Thanks in advance

1 0

[Dovecot] quota exceeded not showing email address
by JC 07 Oct '07

07 Oct '07

Hi everyone, I have a mail server with postfix 2.3.8-2, dovecot 1.0.0 and mysql with virtual users and domains. Everything is working but when a mail bounces it doesn't show me what is the email address with overquota. I'm using Dovecot Delivery Agent to send a mail when an email bounces. This is the message that shows me: Your message was automatically rejected by Dovecot Mail Delivery Agent. The following reason was given: Quota exceeded It doesn't show me what is the email address. In my /etc/postfix/master.cf I added this: dovecot unix - n n - - pipe flags=DRhu user=xyz:xyz argv=/usr/lib/dovecot/deliver -d ${recipient} In my /etc/postfix/main.cf I added this: dovecot_destination_recipient_limit = 1 virtual_transport = dovecot In my /etc/dovecot/dovecot.conf : protocol lda { postmaster_address = <postmaster-address> auth_socket_path = /var/run/dovecot/auth-master } ... user = xyz socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = xyz group = xyz } } What should i have to show the email address?

1 0

Re: [Dovecot] Postfix with Deliver (LDA) - user unknown
by Branislav Baca 06 Oct '07

06 Oct '07

Glenn wrote: > Howdy BB! Hopefully this helps to answer your questions... > > /etc/mail/postfix/vmailboxes contains: > > test(a)geekinetdev.com test/ > > /etc/passwd contains: > > test:*:5000:5000:test account for email:/var/mailboxes/test:/nonexistent probably you need here to have a full user@domain name. i.e: test@geekinetdev.com:*:5000:5000:test account for email:/var/mailboxes/test:/nonexistent > > The reason for the virtual_* stuff is that I am testing each program > configuration as I set up a new SMTP server. The goal is to move all > the virtual_* settings to MySQL. However, I want to walk before I run. > Not sure if that is part of my problem.?. Of course, you can leave it there, I've just said it is not necessary for dovecot to work. Also try to avoid using mysql, except you have dedicated mysql server or playing on small site with a lot of RAM. This is by my own experiences. LDAP is probably better solution but more complex to setup. > > Thanks for your assistance! > > glenn > > > Branislav Baca wrote: >> You have set in the main.cf: >> virtual_mailbox_maps = hash:/etc/mail/postfix/vmailboxes >> but dovecot deliver is using userdb for this purpose, which you have >> set to >> passwd. Have you equivalent data in both places? Similary nearly all >> configuration parameters in the main.cf of the postfix starting with >> virtual_??? are not required, but should be provided by userdb for >> dovecot >> deliver. >> >> BB >> >> On 1:26 04/10/07 "Karin Gregorec" <karinnv1(a)gmail.com> wrote: >>> Good Day All! I am attempting to configure deliver as our LDA. I am >>> also configuring the server to use Postfix instead of Sendmail. I >>> have followed the all the documentation and examples I could find. >>> >>> Below are my Dovecot and Postfix configs. Can someone please smack me >>> upside the head and tell me why I am getting "user unknown" errors? >>> If i don't use deliver as the LDA, all works perfectly. Help... >>> >>> TIA, >>> glenn >>> >>> ========== >>> >>> >>> *** Dovecot Config *** >>> >>> dovecot -n >>> # 1.0.5: /usr/local/etc/dovecot.conf >>> base_dir: /var/run/dovecot/ >>> log_path: /var/log/maillogs/dovecot.log >>> protocols: imap imaps pop3 pop3s >>> ssl_cipher_list: ALL:!LOW >>> disable_plaintext_auth: no >>> verbose_ssl: yes >>> login_dir: /var/run/dovecot/login >>> login_executable(default): /usr/local/libexec/dovecot/imap-login >>> login_executable(imap): /usr/local/libexec/dovecot/imap-login >>> login_executable(pop3): /usr/local/libexec/dovecot/pop3-login >>> login_greeting: GID Ready >>> login_log_format_elements: user=<%u> service=%s authMethod=%m rIP=%r >>> lIP=%l encryption=%c >>> login_max_processes_count: 256 >>> verbose_proctitle: yes >>> first_valid_uid: 5000 >>> last_valid_uid: 10000 >>> first_valid_gid: 0 >>> mail_extra_groups: mail >>> mail_location: maildir:~/Maildir >>> dotlock_use_excl: yes >>> fsync_disable: yes >>> maildir_copy_with_hardlinks: yes >>> mail_executable(default): /usr/local/libexec/dovecot/imap >>> mail_executable(imap): /usr/local/libexec/dovecot/imap >>> mail_executable(pop3): /usr/local/libexec/dovecot/pop3 >>> mail_process_size: 1024 >>> mail_plugins(default): quota imap_quota >>> mail_plugins(imap): quota imap_quota >>> mail_plugins(pop3): >>> mail_plugin_dir(default): /usr/local/lib/dovecot/imap >>> mail_plugin_dir(imap): /usr/local/lib/dovecot/imap >>> mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 >>> imap_client_workarounds(default): delay-newmail outlook-idle >>> netscape-eoh tb-extra-mailbox-sep >>> imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh >>> tb-extra-mailbox-sep >>> imap_client_workarounds(pop3): outlook-idle >>> pop3_uidl_format(default): >>> pop3_uidl_format(imap): >>> pop3_uidl_format(pop3): %08Xu%08Xv >>> pop3_client_workarounds(default): >>> pop3_client_workarounds(imap): >>> pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh >>> pop3_logout_format(default): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s >>> pop3_logout_format(imap): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s >>> pop3_logout_format(pop3): top=%t/%T, retr=%r/%R, del=%d/%m, size=%s >>> auth default: >>> cache_size: 1024 >>> cache_ttl: 604800 >>> verbose: yes >>> passdb: >>> driver: pam >>> args: cache_key=%Lu >>> userdb: >>> driver: passwd >>> socket: >>> type: listen >>> master: >>> path: /var/run/dovecot/auth-master >>> mode: 384 >>> user: maildrop >>> plugin: >>> quota: maildir:storage=10000000:ignore=Trash >>> >>> >>> *** Postfix main.cf *** >>> >>> alias_database = hash:/etc/mail/postfix/aliases >>> alias_maps = hash:/etc/mail/postfix/aliases >>> biff = no >>> command_directory = /usr/local/sbin >>> daemon_directory = /usr/local/libexec/postfix >>> >>> debug_peer_level = 2 >>> debugger_command = >>> PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont; >>> echo where) | gdb $daemon_directory/$process_name $process_id 2>&1 >>> > $config_directory/$process_name.$process_id.log & sleep 5 >>> >>> #### Dovecot LDA Service - http://wiki.dovecot.org/LDA/Postfix >>> dovecot_destination_recipient_limit = 1 >>> >>> home_mailbox = Maildir/ >>> html_directory = no >>> inet_interfaces = all >>> mail_owner = postfix >>> mail_spool_directory = /var/mail >>> mailq_path = /usr/local/bin/mailq >>> manpage_directory = /usr/local/man >>> message_size_limit = 12000000 >>> mydestination = $myhostname, localhost.$mydomain, localhost >>> mydomain = geekinternetdevelopment.com >>> myhostname = superman.geekinternetdevelopment.com >>> mynetworks = 72.18.193.0/24, 127.0.0.0/8 >>> newaliases_path = /usr/local/bin/newaliases >>> queue_directory = /var/spool/postfix >>> readme_directory = no >>> sample_directory = /usr/local/etc/postfix >>> sendmail_path = /usr/local/sbin/sendmail >>> setgid_group = maildrop >>> smtpd_banner = $myhostname NO WHAMMIES!!! >>> >>> virtual_gid_maps = static:5000 >>> virtual_mailbox_base = /var/mailboxes >>> virtual_mailbox_domains = hash:/etc/mail/postfix/vdomains >>> virtual_mailbox_maps = hash:/etc/mail/postfix/vmailboxes >>> virtual_minimum_uid = 1000 >>> virtual_transport = dovecot >>> virtual_uid_maps = static:5000 >>> unknown_local_recipient_reject_code = 550 >>> >>> *** Postfix master.cf *** >>> ...snip... >>> dovecot unix - n n - - pipe >>> flags=DRhu user=maildrop:maildrop >>> argv=/usr/local/libexec/dovecot/deliver -e -d ${recipient} > >

1 0

[Dovecot] dovecot cloning mails?
by Andreas Schneider 06 Oct '07

06 Oct '07

Hi, I have a strange issue here. I have a large message of a svn commit and the message is cloning itself more and more. I've deleted it several time completely but it doesn't go away. http://www.cynapses.org/tmp/dovecot.png How can I debug it? Thanks, -- andreas milliways:~ # dovecot -n # 1.0.5: /etc/dovecot/dovecot.conf base_dir: /var/run/dovecot/ log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps managesieve listen(default): * listen(imap): * listen(managesieve): *:2000 ssl_ca_file: /etc/ssl/certs/cacert.pem ssl_cert_file: /etc/ssl/certs/milliways.pem ssl_key_file: /etc/ssl/private/milliways.key login_dir(default): /var/run/dovecot//login login_dir(imap): /var/run/dovecot//login login_dir(managesieve): login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login first_valid_uid: 150 last_valid_uid: 150 mail_extra_groups: mail mail_location: maildir:/srv/mail/%u maildir_copy_with_hardlinks: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): dspam mail_plugins(imap): dspam mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib64/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib64/dovecot/modules/managesieve auth default: passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: mail plugin: dspam_spamfolder: Junk -- http://www.cynapses.org/ - cybernetic synapses

2 2

[Dovecot] Strange errors
by Ralf Hildebrandt 06 Oct '07

06 Oct '07

One of our users seems to have strange problems with his mailbox: Oct 2 00:36:42 postamt dovecot: IMAP(rbxxxx): Corrupted transaction log file /home/r/b/rbxxxx/Maildir/.listen.CCL/dovecot.index.log: Append with UID 1096, but next_uid = 1097 Oct 2 00:36:42 postamt dovecot: IMAP(rbxxxx): Corrupted transaction log file /home/r/b/rbxxxx/Maildir/.listen.CCL/dovecot.index.log: Append with UID 1096, but next_uid = 1097 Oct 2 00:36:42 postamt dovecot: IMAP(rbxxxx): Unexpected transaction log desync with index /home/r/b/rbxxxx/Maildir/.listen.CCL/dovecot.index Oct 2 00:36:42 postamt dovecot: IMAP(rbxxxx): Transaction log file /home/r/b/rbxxxx/Maildir/.listen.CCL/dovecot.index.log: marked corrupted Oct 2 02:40:54 postamt dovecot: IMAP(rbxxxx): Unlinked a duplicate: 1191278050.P11797Q0M631938.postamt.charite.de,S=3164:2, Oct 2 02:40:54 postamt dovecot: IMAP(rbxxxx): Maildir /home/r/b/rbxxxx/Maildir/.listen.CCL sync: UID inserted in the middle of mailbox (1097 > 1096, file = 1191278202.P12120Q0M512940.postamt.charite.de,S=5349:2,) Oct 2 13:46:12 postamt dovecot: IMAP(rbxxxx): Corrupted transaction log file /home/r/b/rbxxxx/Maildir/.listen.jmol/dovecot.index.log: Append with UID 570, but next_uid = 571 Oct 2 13:46:12 postamt dovecot: IMAP(rbxxxx): Transaction log file /home/r/b/rbxxxx/Maildir/.listen.jmol/dovecot.index.log: marked corrupted Oct 2 13:46:12 postamt dovecot: IMAP(rbxxxx): Unlinked a duplicate: 1191322757.P13572Q0M515987.postamt.charite.de,S=3982:2,a Oct 2 13:46:12 postamt dovecot: IMAP(rbxxxx): Maildir /home/r/b/rbxxxx/Maildir/.listen.jmol sync: UID inserted in the middle of mailbox (571 > 570, file = 1191325571.P17909Q0M852537.postamt.charite.de,S=5674:2,) This is dovecot 1.0.5. -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) plonk(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de Never underestimate the bandwidth of a station wagon full of tapes. -- Dr. Warren Jackson, Director, UTCS

2 2

[Dovecot] Timeout leak
by Lars Stavholm 06 Oct '07

06 Oct '07

In my development environment I sometimes get: dovecot: IMAP(stava): Timeout leak: 0x4425d0 Does anyone know what it means or how I can use this information? Cheers /Lars

2 2

[Dovecot] Corrupt Message?
by Daniel Watts 06 Oct '07

06 Oct '07

Dear List, Am accessing dovecot imap through squirrelmail. Squirrelmail paginates the message list into pages. All works fine except for the page one particular email is in. When I try to open that page (or in fact click 'show all') the server returns: ERROR: Bad or malformed request. Query: FETCH 549,551,555:557,563,565,567:569 (FLAGS UID RFC822.SIZE INTERNALDATE BODY.PEEK[HEADER.FIELDS (Date To Cc From Subject X-Priority Importance Priority Content-Type)]) Server responded: No mailbox selected. Could you possibly let me know what I should do and also how I can find the guilty mail file from that error? Can I just delete the email? Or is there a nice script to repair a dovecot maildir? Many thanks for your advice, Daniel -- Squirrelmail Stable 1.4.8 PHP 5.x Hardened with Eaccelerator Apache 2.x Imapproxy over Dovecot/Maildir all running on Gentoo Linux for ~5,000 users.

2 2

[Dovecot] How to upgrade a running Dovecot?
by Mike Brudenell 06 Oct '07

06 Oct '07

Greetings - Could someone confirm how to perform various upgrades on a live system running Dovecot please? Scenario 1: Change to dovecot.conf =================================== If I make a change to dovecot.conf am I right in thinking I can simply send a HUP signal to the main dovecot process to get it to re- read the configuration file and act on its revised content? Scenario 2: Altered SSL Certificates ===================================== I need to replace our current certificates and have prepared new files containing the replacement certificate and private key. Am I right in thinking that I can simply modify dovecot.conf to point at the new files and send a HUP signal to dovecot? Specifically, will new connections use the revised certificates, and existing connections continue to work OK without interruption? Scenario 3: Software Upgrade ============================= I build a particular version of Dovecot into the tree /usr/local/ dovecot-A.B.C and then have a symlink called "dovecot" pointing at the this directory. To upgrade I can then build the new version into /usr/local/dovecot-X.Y.Z and test. To actually switch over the live service to the new X.Y.Z version do I need to: a) Totally shut down the old A.B.C version of Dovecot, thereby breaking all open connections for users? or b) Assuming I am using "shutdown_clients = no" can I just kill the master "dovecot" process and then start up the new version? Ideally I want existing connections to remain running, but new connections to start up using the new X.Y.Z version of Dovecot. The comment for "shutdown_clients" implies this, but also says: "This however means that after master process has died, the client processes can't write to log files anymore." So if I understand this correctly then with "shutdown_clients = no" in force then the sequence and behaviour is this? ... 1. Old version A.B.C of Dovecot running, clients can log through the master "dovecot" process to the logfiles. 2. Kill the old master "dovecot" process, start new X.Y.Z version up. 3. New connections get served by version X.Y.Z. Old connections DON'T get killed and can continue, BUT can no longer write anything to the logfiles? With many thanks, Mike B-) -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

2 1

[Dovecot] "Corrupted index cache file" error (Dovecot 1.0.3)
by Mike Brudenell 06 Oct '07

06 Oct '07

Greetings - Now that users are beginning to pile up more on our new Dovecot-based IMAP service I'm seeing a small number of entries like this in the logfiles: Corrupted index cache file /mailstore/index/o/ozw100/.INBOX/ dovecot.index.cache : invalid record size We are using Dovecot 1.0.3 with Maildir folders served over NFS from NetApp filers, but the index files are stored on local disk. By "a small number" I mean 4 or 5 on each of our two IMAP servers since midnight. * Should I be worried? * Is there anything I need to do fix the files? (I'm guessing not as no problem reports have come in, and the logs show the people affected continuing to work throughout the day.) * Would upgrading to 1.0.5 help? (I couldn't see anything in the Release Notes for either 1.0.4 or 1.0.5 about this) Cheers, Mike B-) -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

3 2