- dovecot - dovecot.org

archive namespace reports mdbox_deleted: same as mdbox: is that ok?
by Marc 15 Mar '21

15 Mar '21

These commands should generate different output not? [@ ~]# doveadm -o mail_location=mdbox_deleted:/home/mail-archive/testtest/mdbox:INDEX=/home/archiveindex/testtest/index mailbox status -u testtest 'messages vsize' "Archive/2018" Archive/2018 messages=70 vsize=6182960 [@ ~]# doveadm -o mail_location=mdbox:/home/mail-archive/testtest/mdbox:INDEX=/home/archiveindex/testtest/index mailbox status -u testtest 'messages vsize' "Archive/2018" Archive/2018 messages=70 vsize=6182960

2 13

Virtual users @ virtual domains / better documentation?
by justina colmena ~biz 15 Mar '21

15 Mar '21

I have configured postfix so it will deliver mail to virtual mailboxes. For some reason, the mail is not delivered to the virtual mailboxes unless both $virtual_alias_domains and $virtual_alias_maps are left undefined: these directives are apparently for aliasing virtual users "@" virtual domains to "real" unix users on the local system. --%%== # ADDRESS REDIRECTION (VIRTUAL DOMAIN) # # The VIRTUAL_README document gives information about the many forms # of domain hosting that Postfix supports. virtual_mailbox_domains = domain1.example.org domain2.example.com virtual_transport = virtual #virtual_alias_domains = domain1.example.org domain2.example.com virtual_mailbox_base = /var/mail/vhosts virtual_mailbox_maps = hash:/etc/postfix/vmailbox virtual_minimum_uid = 100 virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 #virtual_alias_maps = hash:/etc/postfix/virtual ==%-- If the $virtual_alias_maps directive invalidates virtual mailboxes, then "the usual" aliases (postmaster@, etc.) for the virtual domains would have to be listed in /etc/aliases along with the non-virtual aliases, but this does not work either, and generates a warning when "newaliases" is run. postalias: warning: /etc/aliases, line 99: name must be local So as far as I can tell, no aliasing at all is available for "virtual_mailbox_domains" in postfix I am still unsure how to authenticate the virtual users on postfix. PAM authentication works fine for non-virtual users. The following command gives two options for authentication: cyrus-sasl and dovecot-sasl. # postconf -a cyrus dovecot Postfix also works with cyrus-sasl if the passwords are set in "/etc/sasldb2" via the "saslpasswd2" command, but dovecot doesn't seem to work with cyrus-sasl, and has its own type of sasl authentication. I realize this is not a postfix list, so my real question here is, What do I need in order for dovecot to authenticate the virtual users and allow them to read their mail and obtain authorization to send mail via postfix on the same system?

3 2

understanding refcount=0, where is my deleted message?
by Marc 14 Mar '21

14 Mar '21

I have migrated beginning this year from mbox to mdbox, but I am still struggling with the concept of refcount=0 and where these message stay. This is my test mailbox (shell script uses 'doveadm mailbox status -u') [@ sbin]# mailbox-ls.sh testtest size listing mailboxes of testtest: Archive msgs=0 vsize=0B Archive/2011 msgs=0 vsize=0B Archive/2012 msgs=0 vsize=0B Archive/2013 msgs=0 vsize=0B Archive/2014 msgs=0 vsize=0B Archive/2015 msgs=0 vsize=0B Archive/2016 msgs=0 vsize=0B Archive/2017 msgs=0 vsize=0B Archive/2018 msgs=0 vsize=0B Archive/2019 msgs=3435 vsize=277MiB Archive/Archive msgs=1 vsize=2.4KiB Deleted Messages msgs=0 vsize=0B Drafts msgs=4 vsize=1.1KiB INBOX msgs=1329 vsize=211MiB INBOX/test2 msgs=3 vsize=187KiB Junk msgs=2 vsize=2.0KiB Sent msgs=20 vsize=13KiB Trash msgs=47 vsize=752KiB [@ sbin]# doveadm -o mail_location=mdbox_deleted:/home/popusers/testtest/mdbox:INDEX=/home/popindex/testtest/index mailbox status -u testtest 'messages vsize' '*' Sent messages=0 vsize=0 Drafts messages=0 vsize=0 INBOX/test2 messages=0 vsize=0 Junk messages=0 vsize=0 Deleted Messages messages=0 vsize=0 Trash messages=0 vsize=0 INBOX messages=0 vsize=0 Now I am deleting 1 message from inbox with thunderbird, and I am getting this expected result, 1 message less in inbox, 1 message more in Deleted messages. [root@mail04 sbin]# mailbox-ls.sh testtest size listing mailboxes of testtest: Archive msgs=0 vsize=0B Archive/2011 msgs=0 vsize=0B Archive/2012 msgs=0 vsize=0B Archive/2013 msgs=0 vsize=0B Archive/2014 msgs=0 vsize=0B Archive/2015 msgs=0 vsize=0B Archive/2016 msgs=0 vsize=0B Archive/2017 msgs=0 vsize=0B Archive/2018 msgs=0 vsize=0B Archive/2019 msgs=3435 vsize=277MiB Archive/Archive msgs=1 vsize=2.4KiB Deleted Messages msgs=1 vsize=433B Drafts msgs=4 vsize=1.1KiB INBOX msgs=1328 vsize=211MiB INBOX/test2 msgs=3 vsize=187KiB Junk msgs=2 vsize=2.0KiB Sent msgs=20 vsize=13KiB Trash msgs=47 vsize=752KiB [@ sbin]# doveadm -o mail_location=mdbox_deleted:/home/popusers/testtest/mdbox:INDEX=/home/popindex/testtest/index mailbox status -u testtest 'messages vsize' '*' Sent messages=0 vsize=0 Drafts messages=0 vsize=0 INBOX/test2 messages=0 vsize=0 Junk messages=0 vsize=0 Deleted Messages messages=0 vsize=0 Trash messages=0 vsize=0 INBOX messages=0 vsize=0 Now I right click trash in thunderbird and choose empty trash, and I am getting this expected result, Deleted messages is empty. (Notice Trash stays at the same message count) [@ sbin]# mailbox-ls.sh testtest size listing mailboxes of testtest: Archive msgs=0 vsize=0B Archive/2011 msgs=0 vsize=0B Archive/2012 msgs=0 vsize=0B Archive/2013 msgs=0 vsize=0B Archive/2014 msgs=0 vsize=0B Archive/2015 msgs=0 vsize=0B Archive/2016 msgs=0 vsize=0B Archive/2017 msgs=0 vsize=0B Archive/2018 msgs=0 vsize=0B Archive/2019 msgs=3435 vsize=277MiB Archive/Archive msgs=1 vsize=2.4KiB Deleted Messages msgs=0 vsize=0B Drafts msgs=4 vsize=1.1KiB INBOX msgs=1328 vsize=211MiB INBOX/test2 msgs=3 vsize=187KiB Junk msgs=2 vsize=2.0KiB Sent msgs=20 vsize=13KiB Trash msgs=47 vsize=752KiB So this message should have refcount=0. But where is it, this still shows 0 messages everywhere? [@ sbin]# doveadm -o mail_location=mdbox_deleted:/home/popusers/testtest/mdbox:INDEX=/home/popindex/testtest/index mailbox status -u testtest 'messages vsize' '*' Sent messages=0 vsize=0 Drafts messages=0 vsize=0 INBOX/test2 messages=0 vsize=0 Junk messages=0 vsize=0 Deleted Messages messages=0 vsize=0 Trash messages=0 vsize=0 INBOX messages=0 vsize=0

1 0

Panic: file mdbox-map.c: line 1494 (mdbox_map_get_uid_validity): assertion failed: (map->view != NULL)
by Marc 12 Mar '21

12 Mar '21

Does this mean I have some problems with filesystem uid's? Currently I have only u=rwx, go is nothing. dovecot-2.2.36-6.el7_8.1.x86_64

3 8

auto scaling dovecot server on AWS
by girivasan.rajasekaran＠minfytech.com 10 Mar '21

10 Mar '21

Hello There - I'm trying to setup dovecot server on AWS and would like to understand the approach on the email server sizing? The emails are expected to surge at times seasonally. How do I plan the email server sizing to handle such load? Does this support auto-scaling? Probably I'm missing the basics. Appreciate your help in giving some clarity.

1 0

invalid vsize-hdr
by Christopher Wensink 10 Mar '21

10 Mar '21

Good afternoon everyone, I have one account on our internal dovecot server that keeps throwing the same repeated error: The user is on a Windows 10 computer running the latest version of Thunderbird. Here's the log: -------------------------------------------------------------------------------------------------------------------- Mar 9 13:03:16 mario2 dovecot: imap(pstrangfeld): Error: vsize-hdr has invalid size: 36 Mar 9 13:09:53 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:18:57 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:25:09 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:29:07 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:31:03 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:37:20 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:42:26 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:47:21 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:50:11 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:53:46 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 13:59:40 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:03:52 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:08:54 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:11:53 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:17:02 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:21:14 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:24:00 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:28:43 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:33:00 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:38:24 mario2 dovecot: imap(user): Connection closed (IDLE running for 0.001 + waiting input for 0.001 secs, 2 B in + 10+10 B out, state=wait-input) in=1578244 out=2878370 Mar 9 14:40:51 mario2 dovecot: imap-login: Login: user=<user>, method=PLAIN, rip=10.5.1.77, lip=10.5.1.17, mpid=97537, TLS, session=<AvLvkCC9w9kKBQFN> Mar 9 14:41:30 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 Mar 9 14:44:14 mario2 dovecot: imap(user): Connection closed (IDLE running for 0.002 + waiting input for 0.001 secs, 2 B in + 10+10 B out, state=wait-input) in=319541 out=1272761 Mar 9 14:44:14 mario2 dovecot: imap-login: Login: user=<user>, method=PLAIN, rip=10.5.1.77, lip=10.5.1.17, mpid=97671, TLS, session=<85YInSC95NkKBQFN> Mar 9 14:46:37 mario2 dovecot: imap(user): Error: vsize-hdr has invalid size: 36 --------------------------------------------------------------- I have tried the following: -Restarting the workstation - Compacting folders in Thunderbird - Repaired the Inbox Folder in Thunderbird - Restarting the dovecot service - Set the connections in Thunderbird Account settings to not check for messages automatically (manual only) - Set the user to own all folders and sub-folders in his home directory on the server I found old message in the archives from 2017 that had the same error but I did not see a posted solution. dovecot --version 2.2.36 (lfl0bfa63) config file: [root@mario2 dovecot]# cat dovecot.conf ## Dovecot configuration file # If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration # "doveconf -n" command gives a clean output of the changed settings. Use it # instead of copy&pasting files when posting to the Dovecot mailing list. # '#' character and everything after it is treated as comments. Extra spaces # and tabs are ignored. If you want to use either of these explicitly, put the # value inside quotes, eg.: key = "# char and trailing whitespace " # Most (but not all) settings can be overridden by different protocols and/or # source/destination IPs by placing the settings inside sections, for example: # protocol imap { }, local 127.0.0.1 { }, remote 10.0.0.0/8 { } # Default values are shown for each setting, it's not required to uncomment # those. These are exceptions to this though: No sections (e.g. namespace {}) # or plugin settings are added by default, they're listed only as examples. # Paths are also just examples with the real defaults being based on configure # options. The paths listed here are for configure --prefix=/usr # --sysconfdir=/etc --localstatedir=/var # Protocols we want to be serving. #protocols = imap pop3 lmtp protocols = imap pop3 # A comma separated list of IPs or hosts where to listen in for connections. # "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces. # If you want to specify non-default ports or anything more complex, # edit conf.d/master.conf. #listen = *, :: listen = *, :: # Base directory where to store runtime data. #base_dir = /var/run/dovecot/ # Name of this instance. In multi-instance setup doveadm and other commands # can use -i <instance_name> to select which instance is used (an alternative # to -c <config_path>). The instance name is also added to Dovecot processes # in ps output. #instance_name = dovecot # Greeting message for clients. #login_greeting = Dovecot ready. # Space separated list of trusted network ranges. Connections from these # IPs are allowed to override their IP addresses and ports (for logging and # for authentication checks). disable_plaintext_auth is also ignored for # these networks. Typically you'd specify your IMAP proxy servers here. #login_trusted_networks = login_trusted_networks = 10.5.1.0/24 # Space separated list of login access check sockets (e.g. tcpwrap) #login_access_sockets = # With proxy_maybe=yes if proxy destination matches any of these IPs, don't do # proxying. This isn't necessary normally, but may be useful if the destination # IP is e.g. a load balancer's IP. #auth_proxy_self = # Show more verbose process titles (in ps). Currently shows user name and # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no # Should all processes be killed when Dovecot master process shuts down. # Setting this to "no" means that Dovecot can be upgraded without # forcing existing client connections to close (although that could also be # a problem if the upgrade is e.g. because of a security fix). #shutdown_clients = yes # If non-zero, run mail commands via this many connections to doveadm server, # instead of running them directly in the same process. #doveadm_worker_count = 0 # UNIX socket or host:port used for connecting to doveadm server #doveadm_socket_path = doveadm-server # Space separated list of environment variables that are preserved on Dovecot # startup and passed down to all of its child processes. You can also give # key=value pairs to always set specific settings. #import_environment = TZ ## ## Dictionary server settings ## # Dictionary can be used to store key=value lists. This is used by several # plugins. The dictionary can be accessed either directly or though a # dictionary server. The following dict block maps dictionary names to URIs # when the server is used. These can then be referenced using URIs in format # "proxy::<name>". dict { #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext } # Most of the actual configuration gets included below. The filenames are # first sorted by their ASCII value and parsed in that order. The 00-prefixes # in filenames are intended to make it easier to understand the ordering. !include conf.d/*.conf # A config file can also tried to be included without giving an error if # it's not found: !include_try local.conf ----------- I need assistance. I appreciate the help. Chris -- Christopher Wensink IS Administrator Five Star Plastics, Inc 1339 Continental Drive Eau Claire, WI 54701 Office: 715-831-1682 Mobile: 715-563-3112 Fax: 715-831-6075 cwensink(a)five-star-plastics.com www.five-star-plastics.com

6 6

DMARC problems with some emails from the list
by Ángel L. Mateo 09 Mar '21

09 Mar '21

Hello, I'm having problems with some emails from the list, been classified as SPAM in my system because of DMARC failures. I'm not sure but this may be a problem with the list configuration. I attach the log for the failures in the last week. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

3 8

Dovecot v2.3.14 released
by Aki Tuomi 09 Mar '21

09 Mar '21

Hi! We are pleased to release v2.3.14 of Dovecot. IMPORTANT NOTE: We have removed some components from the software, please review changelogs carefully prior upgrading. Please find source tarballs at https://dovecot.org/releases/2.3/dovecot-2.3.14.tar.gz https://dovecot.org/releases/2.3/dovecot-2.3.14.tar.gz.sig Binary packages in https://repo.dovecot.org/ Docker images in https://hub.docker.com/r/dovecot/dovecot Aki Tuomi Open-Xchange oy --- * Added new aliases for some variables. Usage of the old ones is possible, but discouraged. (These were partially added already to v2.3.13.) See https://doc.dovecot.org/configuration_manual/config_file/config_variables/ for more information. * Optimize imap/pop3/submission/managesieve proxies to use less CPU at the cost of extra memory usage. * Remove autocreate, expire, snarf and mail-filter plugins. * Remove cydir storage driver. * Remove XZ/LZMA write support. Read support will be removed in future release. * doveadm -D: Add timestamps to debug output even when LOG_STDERR_TIMESTAMP environment variable is not set. Timestamp format is taken from log_timestamp setting. * If BROKENCHAR or listescape plugin is used, the escaped folder names may be slightly different from before in some situations. This is unlikely to cause issues, although caching clients may redownload the folders. * imapc: It now enables BROKENCHAR=~ by default to escape remote folder names if necessary. This also means that if there are any '~' characters in the remote folder names, they will be visible as "~7e". * imapc: When using local index files folder names were escaped on filesystem a bit differently. This affects only if there are folder names that actually require escaping, which isn't so common. The old style folders will be automatically deleted from filesystem. * stats: Update exported metrics to be compliant with OpenMetrics standard. + doveadm: Add an optional '-p' parameter to metadata list command. If enabled, "/private", and "/shared" metadata prefixes will be prepended to the keys in the list output. + doveconf: Support environment variables in config files. See https://doc.dovecot.org/configuration_manual/config_file/config_file_syntax… for more details. + indexer-worker: Change indexer to disconnect from indexer-worker after each request. This allows service indexer-worker's service_count & idle_kill settings to work. These can be used to restart indexer-worker processes once in a while to reduce their memory usage. - auth: "nodelay" with various authentication mechanisms such as apop and digest-md5 crashed AUTH process if authentication failed. - auth: Auth lua script generating an error triggered an assertion failure: Panic: file db-lua.c: line 630 (auth_lua_call_password_verify): assertion failed: (lua_gettop(script->L) == 0). - configure: Fix libunwind detection to work on other than x86_64 systems. - doveadm-server: Process could crash if logging was done outside command handling. For example http-client could have done debug logging afterwards, resulting in either segfault or Panic: file http-client.c: line 642 (http_client_context_close): assertion failed: (cctx->clients_list == NULL). - dsync: Folder name escaping with BROKENCHAR didn't work completely correctly. This especially caused problems with dsync-migrations using imapc where some of the remote folder names may not have been accessible. - dsync: doveadm sync + imapc doesn't always sync all mails when doing an incremental sync (-1), which could lead to mail loss when it's used for migration. This happens only when GUIDs aren't used (i.e. imapc without imapc_features=guid-forced). - fts-tika: When tika server returns error, some mails cause Panic: file message-parser.c: line 802 (message_parser_deinit_from_parts): assertion failed: (ctx->nested_parts_count == 0 || i_stream_have_bytes_left(ctx->input)) - lib-imap: imapc parsing illegal BODYSTRUCTUREs with NILs could have resulted in crashes. This exposed that Dovecot was wrongly accepting atoms in "nstring" handling. Changed the IMAP parsing to be more strict about this now. - lib-index: If dovecot.index.cache has corrupted message size, fetching BODY/BODYSTRUCTURE may cause assert-crash: Panic: file index-mail.c: line 1140 (index_mail_parse_body_finish): assertion failed: (mail->data.parts != NULL). - lib-index: Minor error handling and race condition fixes related to rotating dovecot.index.log. These didn't usually cause problems, unless the log files were rotated rapidly. - lib-lua: Lua scripts using coroutines or lua libraries using coroutines (e.g., cqueues) panicked. - Message PREVIEW handled whitespace wrong so first space would get eaten from between words. - FTS and message PREVIEW (snippet) parsed HTML &entities case-sensitively. - lib-mail: When max nested MIME parts were reached, IMAP BODYSTRUCTURE was written in a way that may have caused confusion for IMAP clients and also Dovecot itself when parsing it. The truncated part is now written out using application/octet-stream MIME type. - lib-oauth2: HS512 and HS384 JWT token algorithms crash when you try to use them: Panic: file hmac.c: line 26 (hmac_init): assertion failed: (meth->context_size <= MAC_MAX_CONTEXT_SIZE). - event filters: NOT keyword did not have the correct associativity. NOT a AND b were getting parsed as NOT (a AND b) instead of (NOT a) AND b. - Ignore ECONNRESET when closing socket. This avoids logging useless errors on systems like FreeBSD. - event filters: event filter syntax error may lead to Panic: file event-filter.c: line 137 (event_filter_parse): assertion failed: (state.output == NULL) - lib: timeval_cmp_margin() was broken on 32-bit systems. This could potentially have caused HTTP timeouts to be handled incorrectly. - log: instance_name wasn't used as syslog ident by the log process. - master: After a service reached process_limit and client_limit, it could have taken up to 1 second to realize that more client connections became available. During this time client connections could have been unnecessarily rejected and a warning logged: Warning: service(...): process_limit (...) reached, client connections are being dropped - stats: Crash would occur when generating openmetrics data for metrics using aggregating functions. - stats: Event filters comparing against empty strings crash the stats process.

5 5

start dovecot multiple instances
by Gonzalo Palacios Goicolea 08 Mar '21

08 Mar '21

Hi All, I'm trying to run dovecot with dovecot-director on the same server, using two different instances, but I'n not able to make the two instances start with systemctl (we are using RHEL7) May be I shueld create a /etc/systemd/system/dovecot.service.d/service.conf file and add there any command? Thanks and best regards -- *Gonzalo Palacios Goicolea* U.T de Infraestructura de Equipos Centrales /Tecnologías de la Información/ Universidad Autónoma de Madrid • Campus de Cantoblanco

2 1

director implementation
by Gonzalo Palacios Goicolea 08 Mar '21

08 Mar '21

Hi All, We're going to put into production dovecot-director. As I wrote in a previous message, we have a lot of errors like these: Feb 28 08:50:42 server5 dovecot: imap(user@domain): Error: Index path/Maildir/dovecot.index: Lost log for seq=5 offset=228: Missing middle file seq=5 (between 5..4294967295, we have seqs 4): Log is locked - newer log can't exist (initial_mapped=1, reason=Index mapped) Feb 28 08:50:42 server5 dovecot: imap(user@domain): Warning: fscking index file path/Maildir/dovecot.index Feb 28 08:50:42 server5 dovecot: imap(user@domain): Error: Failed to map transaction log path/Maildir/dovecot.index.log at sync_offset=10328 after locking: pread() failed: Stale file handle Feb 28 08:50:42 server5 dovecot: imap(user@domain): Error: Index path/Maildir/dovecot.index: Lost log for seq=5 offset=228: Missing middle file seq=5 (between 5..4294967295, we have seqs 4): Requested newer log than exists - still after NFS flush: Log inode is unchanged (initial_mapped=1, reason=Index mapped) Feb 28 08:50:45 server5 dovecot: imap(user@domain): Error: Failed to map transaction log path/Maildir/dovecot.index.log at sync_offset=10328 after locking: pread() failed: Stale file handle Feb 28 08:50:45 server5 dovecot: imap(user@domain): Error: Failed to map view for path/Maildir/dovecot.index: Missing middle file seq=5 (between 5..5, we have seqs 4): Requested newer log than exists - still after NFS flush: Log inode is unchanged My doubt is if it's recommended to delete all dovecot.index* files before passing the traffic through de director servers or it's not required. Any information on this way will be appreciated. We've dovecot-2.2.36-8.el7.x86_64 over RHEL7 Thanks and best regards -- *Gonzalo Palacios Goicolea* U.T de Infraestructura de Equipos Centrales /Tecnologías de la Información/ Universidad Autónoma de Madrid • Campus de Cantoblanco <3D"http://www.uam.es/"> Antes de imprimir este correo piense si es necesario.Cuidemos el medioambiente.

2 1

not getting internal errors logged
by Arkadiusz Miśkiewicz 08 Mar '21

08 Mar '21

Hello. dovecot 2.3.13, 2.3.14 web imap client when doing search is getting error induced by me by deleting lucene-indexes folder: UID SEARCH: Internal error occurred. Refer to server log for more information. [2021-03-08 15:08:01] (0.002 + 0.000 + 0.001 secs). but I'm not getting that internal error logged in syslog. Other information like from lmtp, imap logging in, out etc is logged just fine. In my configs log_path info_log_path debug_log_path are not set, so dovecot default syslog is used. Tested log_path = /tmp/file.txt, too but the effect was the same (regular logs logged there, internal errors not logged) stracing dovecot process I see error message only write()n once (to client) but nowhere else (in a strace visible way). Is anything else controlling internal errors logging? Can't find anything in docs. -- Arkadiusz Miśkiewicz, arekm / ( maven.pl | pld-linux.org )

1 0

Mailbox configuration questions
by justina colmena ~biz 08 Mar '21

08 Mar '21

I am having subtle problems with IMAP mailbox configuration on certain clients such as KMail and Thunderbird, whereas the previous setup was working on K9Mail (mobile) and Trojitá (desktop). I was using Maildir folders, which were mostly working before, but for some reason I had to create explicitly named namespaces for the flatfile (mbox) Inbox and the Maildir "Home" folders. I also specified an INDEX directory for the inboxes, which I made world-writable and sticky, because of permission problems creating subdirectories in it. KMail always seems to put sent mail into a local "sent-mail" folder, rather than the IMAP Sent folder associated with the sending account. (KMail and Thunderbird have a more POP-oriented architecture for the desktop, whereas Trojitá is exclusively IMAP.) Is there an easier better way to organize some of this stuff? Or how is it "usually" done?

3 2

Re: Re: v2.3.11.3 solr plugin search via MUA fails to match accented ascii characters; cmd line exec of `doveadm fts lookup` PANICs (assertion failed)
by Roland Martinez 05 Mar '21

05 Mar '21

1 0

Where can I contact with this list administrator?
by Ángel L. Mateo 05 Mar '21

05 Mar '21

Hi, I'm having problems with some emails receive from this list. Problems related with DMARC. How can I contact with this list administrator to try to fix it? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

3 2

last login plugins
by Henry 05 Mar '21

05 Mar '21

Anyone kwon the last-login plugins can using Authentication variables such as %m mechanism, %a local_port . we want to record this in DB, thanks

3 21

About TLS variables
by Henry 04 Mar '21

04 Mar '21

Hello, I found the Variable %c only has TLS, Can it be using "TLSv1, TLSv1.1, TLSv1.2, TLSv1.3" instead of only TLS like as dovecot logging, this is really a most meaningful , thanks Variable %cLong name securedDescription “TLS” with established SSL/TLS connections, “TLS handshaking”, or “TLS [handshaking]: error text” if disconnecting due to TLS error. “secured” with localhost connections. Otherwise empty.

2 2

Re: Bug in renaming folder hierarchies - any reaction ?
by Klaus Steinberger 04 Mar '21

04 Mar '21

Hi, no comments on this? This is definitly with two different IMAP Clients reproducible. This led already to some message loss in user Mailboxes. > we discovered a major problem with renaming folders with subfolders > > testszenario: > > folders: > > test1 > test1/test1-1 > test1/test1-2 > > all 3 folders contain a test message > > after renaming the top level folder test1 to test2 following folders exist: > > test2 > test2/test1-1 > test2/test1-2 > > the subfolders test1-1 and test1-2 are empty, the top level folder contains the > correct message. > > > Now renmaing test2 back to test1: > > Alle folders again contain their messages. > > So this looks like during renaming the top level folder just the message > references for the subfolders got lost, and with renaming back they are there again. > > I can reproduce this behavior both with thunderbird and Horde Webmail as a > client, also it happens with a second different dovecot setup > Sincerly, Klaus Steinberger

2 7

Pigeonhole v0.5.14 released
by Aki Tuomi 04 Mar '21

04 Mar '21

Hi! We are pleased to release v0.5.14 of Pigeonhole. Please find source tarballs at https://pigeonhole.dovecot.org/releases/2.3/dovecot-2.3-pigeonhole-0.5.14.t… https://pigeonhole.dovecot.org/releases/2.3/dovecot-2.3-pigeonhole-0.5.14.t… Binary packages in https://repo.dovecot.org/ Docker images in https://hub.docker.com/r/dovecot/dovecot Aki Tuomi Open-Xchange oy --- * IMAP FILTER command: cmd-filter-sieve - Do not allow NIL as script name argument.

1 0

Why Last-login?
by ＠lbutlr 04 Mar '21

04 Mar '21

I've noticed several threads over the last year or so about last-login, and I was curious WHY people care about tracking this in the database. I can see wanting to know if a user has logged in recently, but this seems quite easy to tell by simply looking at the time stamp and/or contents of the mail spool for the user. For example, on my system I can look at the timestamps on the 'new' folders in the user's maildir to see if they are getting mail, and if the folders are empty, I have a time stamp of when they last checked that mailbox, giving me a pretty accurate time for when they last logged in. For example, looking at one user: # ls -lsdtr /path/to/user/maildir/{new,.**/new} I can see that the most recent "new" mailboxes were accessed on 02 Mar 14:25 and 03 Mar 01:45, and I can see that the latter mailbox has files in it and the former mailbox does not (just by the size, without doing an extra ls of those directories), so I know that the last time the user logged in was about 14:25 or later yesterday and that they definitely have not logged in in the last 3h05, which seems close enough to me. Am I missing some reason I would need/want to keep track of that specific login time separately? -- 'But you ain't part of it, are you?' said Granny conversationally. 'You try, but you always find yourself watchin' yourself watchin' people, eh? Never quite believin' anything? Thinkin' the wrong thoughts?'

7 12

Git / Compilation error
by Joan Moreau 04 Mar '21

04 Mar '21

Hello, With latest git, I get the following error : configure.ac:761: the top level configure.ac:22: error: possibly undefined macro: AC_DEFINE If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. configure.ac:205: error: possibly undefined macro: AC_MSG_ERROR configure.ac:247: error: possibly undefined macro: AS_IF configure.ac:303: error: possibly undefined macro: AM_ICONV configure.ac:434: error: possibly undefined macro: AC_CHECK_HEADER configure:28073: error: possibly undefined macro: AC_CHECK_FUNC Something I am missing? Thank you

2 7

t/s expired cert error
by Voytek Eymont 04 Mar '21

04 Mar '21

since a couple of days one of users reported getting expired certificate error in TB, looking at the log, I can see like: Mar 02 21:46:24 pop3-login: Info: Disconnected (no auth attempts in 0 secs): user=<>, rip=111.222.333.444, lip=103.106.168.105, TLS: SSL_read failed: error:14094415:SSL routines:SSL3_READ_BYTES:sslv3 alert certificate expired: SSL alert number 45, session=<...> but, looking at server with https://ssl-tools.net/mailservers/emu.sbt.net.au it says 'valid' as does certbot tool what am I missing ? Expiry Date: 2021-04-27 12:11:32+00:00 (VALID: 55 days) Certificate Path: /etc/letsencrypt/live/emu.sbt.net.au/fullchain.pem Private Key Path: /etc/letsencrypt/live/emu.sbt.net.au/privkey.pem # grep ssl_ dovecot.conf ssl_cert = </etc/letsencrypt/live/emu.sbt.net.au/fullchain.pem ssl_key = </etc/letsencrypt/live/emu.sbt.net.au/privkey.pem ssl_dh=</etc/dovecot/dh.pem

7 9

LDA File Permissions
by David Morsberger 03 Mar '21

03 Mar '21

All, I am looking for an easy way to setup LDA so that it creates files with group read permission. Currently LDA/Sieve create the '.dovecot.lda-dupes’ file with ‘0600’. My backup process needs to be able to read the file because it runs as a user that is in the same group as the LDA process. I looked into the source code and the file is opened with mode ‘0666’ as " fd = open(lock_info->lock_path, O_RDWR | O_EXCL | O_CREAT, 0666); This implies it is a umask issue. What is the best way to view and set the umask value for the LDA process on Ubuntu 20.04? Thanks, David

1 0

Can Dovecot honor Outlook's "leave mail on server for X days" setting?
by Steve Dondley 03 Mar '21

03 Mar '21

I googled around for a quite bit but surprisingly came up empty for an answer to this question which I'm sure has been broached before. I've got a linux box running dovecot/postfix using maildir format. I was surprised to learn that a client that had many GBs of email was running POP3, not IMAP. It turns out they had a setting to delete POP3 mail after X days turned on but it just went ignored. I know this is not how POP3 is supposed to work, but is there a way to get dovecot to honor the user's settings in Outlook? Or should I just tell the client to turn this off and use a proper IMAP account?

3 2

Skipped because not active
by 刘莹莹 03 Mar '21

03 Mar '21

config: mail_attribute_dict = file:%h/dovecot-attributes mailbox_list_index=yes plugin { push_notification_driver = dlog push_notification_driver = ox:url=http://127.0.0.1:80/notify-example.php } protocol imap { mail_plugins = autocreate notify push_notification imap_metadata = yes } protocol lda { mail_plugins = autocreate notify push_notification log_path = /var/log/lda.log } Error: Debug: push-notification-ox: Skipped because not active (/private/vendor/vendor.dovecot/pvt/server/vendor/vendor.dovecot/http-notify METADATA not set)

2 1

Can master users retain private \Seen flags ?
by tuuialou 02 Mar '21

02 Mar '21

Hello, I am trying to setup a shared mailbox for a small team. Let's say Alice and Bob both need to read and answer sales(a)example.com. I would like Alice and Bob to retain private \Seen flags on sales(a)example.com. I know I can achieve that with INDEXPVT on shared or public mailboxes but I am not 100% happy with this solution because: - Thunderbird displays sales(a)example.com/Inbox and sales(a)example.com/Sent as "subscribed folders" within alice(a)example.com and bob(a)example.com. So Alice and Bob can't use the unified view of Thunderbird. - I need create a special identity in Alice and Bob Thunderbird's configuration so the sender is sales(a)example.com when Alice or Bob sends an email from sales(a)example.com (and not alice(a)example.com or bob(a)example.com) But I am not sure another email client is able to do that (on a mobile phone for example). - I need to add ACL rights if a new folder is created under sales(a)example.com. So I am now looking at the "master users" feature of Dovecot to replicate this MS Exchange setup https://www.en.its.aau.dk/instructions/Mail/shared-mailbox-thunderbird/ (alice(a)example.com and bob(a)example.com log is as sales(a)example.com) I achieved that but I don't know how to retain private \Seen flags so that Bob doesn't see an email as read even if Alice has marked it as read before. Is it possible to retain private \Seen flags with master users? If yes, how can I achieve that? Thank you for any help! PS: I posted the same question on https://forum.iredmail.org/post77816.html and https://forum.iredmail.org/topic13549-proposal-for-a-exchange-like-shared-m… but I couldn't get help and was advised to ask here.

2 6