- dovecot - dovecot.org

[Dovecot] problem with kqueue
by Alessandro de Manzano 21 Jun '06

21 Jun '06

Hello, I'm a new user of Dovecot (since 1.0b8) and I'ld report about a possible bug. Situation: Dovecot 1.0beta9 with kqueue support FreeBSD 6.1-Release x86 machine (IBM x206, P4 3.2 Ghz) local filesystem UFS2 This is an internal, experimental, mail server running Postfix and Dovecot configured with Maildirs e IMAP-only access. Clients are quite few, now, just because it's an experiment. However are near all Outlook Express 6. Running with dovecot 1.0 beta8 _without_ kqueue support for few weeks was fine, no problems at all. A couple of days ago I updated to beta9 (using FreeBSD's portupgrade tools) and in the _same_time_ I enabled the kqueue support. Since then I've seen about 3-4 of these in the log: (note that process traps apparently after reporting the unrecognized event) Jun 20 10:38:53 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:38:54 bigblue dovecot: IMAP(laura2): Disconnected in IDLE Jun 20 10:38:54 bigblue dovecot: IMAP(laura2): Unrecognized event: kevent {.ident = 1, .filter = 0xfffffffe, .flags = 0x0000, .fflags = 0x00000000, .data = 0x00008322} Jun 20 10:38:54 bigblue dovecot: IMAP(laura2): mode: 0x004x Jun 20 10:38:54 bigblue kernel: pid 18426 (imap), uid 1004: exited on signal 6 Jun 20 10:38:54 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:38:54 bigblue dovecot: child 18426 (imap) killed with signal 6 Jun 20 10:38:54 bigblue dovecot: IMAP(laura2): Disconnected Jun 20 10:38:54 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:38:54 bigblue dovecot: IMAP(laura2): Disconnected in IDLE Jun 20 10:38:54 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:39:54 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:39:54 bigblue dovecot: IMAP(laura2): Disconnected in IDLE Jun 20 10:39:54 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:39:54 bigblue dovecot: IMAP(laura2): Disconnected in IDLE Jun 20 10:39:54 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:39:54 bigblue dovecot: IMAP(laura2): Disconnected in IDLE Jun 20 10:39:54 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:39:54 bigblue dovecot: IMAP(laura2): Disconnected Jun 20 10:39:54 bigblue dovecot: imap-login: Login: user=<laura2>, method=PLAIN, rip=192.168.9.31, lip=192.168.9.68 Jun 20 10:39:54 bigblue dovecot: IMAP(laura2): Disconnected in IDLE Any ideas ? Any one else got these messages ? I'ld try recompiling beta9 without kqueue support, probably the issue would disappear, but IMHO is not the best way to "correct" things :) Many thanks in advance! -- Alessandro de Manzano System & Network Administrator Playstos - TIMA S.p.A. Corso Sempione 63 20149 Milano, Italy tel.: +39-023314153 fax : +39-02315678 email: demanzano(a)playstos.com http://www.playstos.com

1 0

[Dovecot] Dovecot servers / SAN
by Dean Manners 21 Jun '06

21 Jun '06

Hey guys, Wondering if anyone out there has any input on running Dovecot with SAN storage. Its coming to the time where we need to run load balanced servers, and past experiences steer us away from a NAS. Tips / pitfalls ? Regards __________________________________________ Dean Manners

3 4

RE: [Dovecot] imap - mailbox in an inconsistant state
by Patrick Carney 21 Jun '06

21 Jun '06

So how do I delete his indexes? Is there somewhere a step by step procedure? Timo, please help? Forgive me, I am new to all this. Thanks much, Patrick -----Original Message----- From: Jeff Graves [mailto:jeff@image-src.com] Sent: Tuesday, June 20, 2006 11:34 AM To: 'Patrick Carney' Subject: RE: [Dovecot] imap - mailbox in an inconsistant state I haven't used 0.99 in a while but it shouldn't destroy the subscriptions. I think the next login may be delayed some while the index is rebuilt. Might want to check with Timo. -- Jeff Graves, MCSA Image Source, Inc. 508.966.5200 x31 www.image-src.com -----Original Message----- From: Patrick Carney [mailto:patrick@castandcrew.com] Sent: Tuesday, June 20, 2006 2:23 PM To: 'Jeff Graves'; dovecot(a)dovecot.org Subject: RE: [Dovecot] imap - mailbox in an inconsistant state Will that destroy his folder subscriptions? Will I loose anything? Thanks PAtrick -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Jeff Graves Sent: Tuesday, June 20, 2006 11:18 AM To: dovecot(a)dovecot.org Subject: RE: [Dovecot] imap - mailbox in an inconsistant state The only quick and easy band-aid I can think of is to delete the indexes and let dovecot recreate them. -- Jeff Graves, MCSA Image Source, Inc. 508.966.5200 x31 www.image-src.com -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Patrick Carney Sent: Tuesday, June 20, 2006 12:44 PM To: 'Timo Sirainen' Cc: dovecot(a)dovecot.org Subject: RE: [Dovecot] imap - mailbox in an inconsistant state Yes. I was afraid of that. But the weird thing is it only happens with One particular user. And at that, it wasn't doing it for the longest time. It just started recently. Is there a band-aid for this. I ask because we are not in a place to upgrade at the moment. Thanks Patrick -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] On Behalf Of Timo Sirainen Sent: Tuesday, June 20, 2006 9:37 AM To: Patrick Carney Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] imap - mailbox in an inconsistant state On Tue, 2006-06-20 at 09:07 -0700, Patrick Carney wrote: > "Jun 19 08:08:34 burmail imap(ed): Corrupted binary tree > file /home/ed/mail/.imap/INBOX/.imap.index.tree: UID to be inserted > isn't higher than existing (2 <= 504)" > Can someone tell me what that means?? I have been assigned to take > over for a departed sys admin and have never used or administered > Dovecot before. You're using 0.99.x Dovecot and there's not much point anymore in trying to figure out why it's broken. I'd suggest upgrading to 1.0beta versions as the first step. If it still breaks after that I can help debug it further. Also see http://wiki.dovecot.org/UpgradingDovecot

3 4

[Dovecot] Reading the index / log files
by Raymond Lillard 20 Jun '06

20 Jun '06

Dear Dovecot, I have a user who claims his mail is being lost. I can find the message marked as having been accepted for delivery in the maillog. I am hoping there is a tool which will let me read his IMAP transactions. We are delivering the messages with procmail and storing them as Maildir files. I read mail on this very same server and process about 500 mails per day. (Its the machine where all of my mail lists are collected.) I use T-bird, he uses LookOut. My working theory is that he (or his MUA) is somehow deleting some of his mail. Being able to read a log of his IMAP transactions would be most helpful. I see nothing about this in the Wiki. Regards, Ray

2 1

[Dovecot] Dovecot --IMAP
by Clovis Tristao 20 Jun '06

20 Jun '06

Hi, I am using dovecot-0.99.14-8.fc4 in Fedora Core release 4 (Stentz), and is appears this message: maillog -------- imap(testelabin): file mbox-rewrite.c: line 429 (mbox_write_header): assertion failed: (hdr_parsed_size.physical_size == hdr_size) When I try to have access a very great mailbox(mbox) (99 MB) via Webmail SquirrelMail. My quota of record is of 250 MB, some suggestion? Thanks a lot, Clóvis -- Clovis Tristao - UNICAMP/Faculdade de Engenharia Agricola Administrador de Redes - Secao de Informatica (SINFO) E-mail: clovis(a)agr.unicamp.br http://www.agr.unicamp.br Fone(0xx19) 37881031-37881038 ou FAX(55xx19) 37881005/37881010

4 8

[Dovecot] repairing mbox files
by Dominic Lepiane 20 Jun '06

20 Jun '06

Hi folks, Is there a good tool for repairing/working with mbox files? I'm trying to get a user moved off of Entourage (Outlook for Mac). Entourage actually exports the mail (was pop, will be imap) as mbox files, however, I can't just drop them in place even after fixing the line-endings. many of the messages with attachments come up with the correct header info but no message body or attachment. But some work so it's clearly a problem that a lot the messages are malformed somehow. Server is RHEL 4, dovecot-0.99.11-2.EL4.1 Current client is Mozilla Thunderbird (1.5.0.4) in Mac OS X 10.4.6 using IMAP. Previous client was MS Entourage (OS x 10.4.6) using POP. Thanks in advance. -- Dominic Lepiane Simon Fraser University/IRMACS dlepiane(a)irmacs.sfu.ca (604)268-7369

2 2

[Dovecot] strange behaviour: connecting to mysql, but no queries after upgrade on ubuntu...
by dstrayer＠sadt.com 20 Jun '06

20 Jun '06

> hi all, > > I'm having trouble using dovecot with mysql after upgrading to 1.0.beta3 on > ubuntu. according to the mysql log, dovecot connects but doesn't issue any > queries.. > > any hints what might be wrong or where I should look? > -- > Cheers, > > Nikl I'm seeing the same behavior under Debian Sid. (First time I've tried it, so I don't know whether the problem is connected to a particular update.) I can make an imap connection using passwd-file authentication. When I switch to mysql, the mysql log shows a connection when dovecot starts but no further activity. The reply to the imap client is NO Temporary authentication failure. In the mail.log, I see: Jun 16 06:25:57 server dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Ilip=192.168.1.2^Irip=192.168.1.3^Iresp=AGd1ZXN0QHNhZHQuY29tAGZvbw== Jun 16 06:25:57 server dovecot: child 4951 (auth-worker) killed with signal 11 Jun 16 06:25:57 server dovecot: auth(default): client out: FAIL^I1^Iuser=foo(a)sample.com^Itemp Jun 16 06:25:57 server dovecot: imap-login: Aborted login: user=<foo(a)sample.com>, method=PLAIN, rip=192.168.1.2, lip=192.168.1.3 Any clues?

4 5

[Dovecot] Problem compile dovecot-sieve under Debian
by Dominique Feyer 20 Jun '06

20 Jun '06

I get the source from CVS: # cvs -d :pserver:anonymous@dovecot.org:/home/cvs co dovecot-sieve Edit configure.in to change - AC_CONFIG_HEADERS([dsieve-config.h]) + AC_CONFIG_HEADERS(dsieve-config.h) Launch autogen.sh, and I have some errors: configure.in: 4: `automake requires `AM_CONFIG_HEADER', not `AC_CONFIG_HEADER' configure.in: 11: automake requires `AM_PROG_LEX', not `AC_PROG_LEX' automake: src/libsieve/Makefile.am: not supported: source file `../map.c' is in subdirectory automake: src/libsieve/Makefile.am: not supported: source file `../imparse.c' is in subdirectory automake: src/libsieve/Makefile.am: lex source seen but `AC_DECL_YYTEXT' not in `configure.in' If i try to build: # ./configure --with-dovecot=../dovecot-1.0.beta9 No error: ... configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating src/libsieve/Makefile config.status: creating stamp.h config.status: creating dsieve-config.h config.status: dsieve-config.h is unchanged # make gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -o sievec sievec.o libsieve.a /usr/src/dovecot-1.0.beta9/src/lib/liblib.a libsieve.a(script.o)(.text+0xa23): In function `sieve_script_load': /usr/src/dovecot-sieve/src/libsieve/script.c:435: undefined reference to `map_refresh' libsieve.a(script.o)(.text+0xaf0): In function `sieve_script_unload': /usr/src/dovecot-sieve/src/libsieve/script.c:462: undefined reference to `map_free' libsieve.a(sieve.o)(.text+0x1e6e): In function `verify_flag': /usr/src/dovecot-sieve/src/libsieve/sieve.y:951: undefined reference to `imparse_isatom' collect2: ld returned 1 exit status make[3]: *** [sievec] Erreur 1 make[3]: Leaving directory `/usr/src/dovecot-sieve/src/libsieve' make[2]: *** [all-recursive] Erreur 1 make[2]: Leaving directory `/usr/src/dovecot-sieve/src' make[1]: *** [all-recursive] Erreur 1 make[1]: Leaving directory `/usr/src/dovecot-sieve' make: *** [all-recursive-am] Erreur 2 I try to install cyrus-dev or cyrus21-dev with apt-get, but nothing change, always the same error. Does someone have success with plugin dovecot-sieve ? Thanks -- Dominique Feyer Administrateur Système Ch. de la Colline 5bis CH-1007 Lausanne dfeyer(a)net4all.ch

3 10

Re: [Dovecot] dovecot, search and i18n
by Timo Sirainen 20 Jun '06

20 Jun '06

On Tue, 2006-06-20 at 13:19 +0400, Alex Povolotsky wrote: > Timo Sirainen wrote: > > On Tue, 2006-06-20 at 11:45 +0400, Alex Povolotsky wrote: > > > >> Hello! > >> > >> Does dovecot support i18n'd search? > >> > > > > It supports searching with all the character sets that your system's > > iconv supports. Case-insensitive matching unfortunately works only for > > A-Z characters for now. > > > > > Hmm... Attempt to plainly use squirrelmail's search resulted in no > success at all. Imap command was quite plain, > > SEARCH ALL SUBJECT {10}[russian letters here] > > The problem is that Cyrillic has at least two widely used encodings. > Maybe I need to specify them exactly somehow? I don't know much about Squirrelmail configuration, but SEARCH command should specify character set if using non-ascii characters in search string. Otherwise Dovecot will just try to search them from the mails without any charset conversions. So correct way would have been something like: SEARCH CHARSET cyrillic ALL SUBJECT {10} Maybe someone in this list knows more about Squirrelmail..

1 0

[Dovecot] Question about acls
by Stian Jordet 20 Jun '06

20 Jun '06

Hi, Is it possible to have a maildir-folder with an acl letter "i", but not "r"? I mean, the folder always seems empty for the user, but he can copy mail there? (which of course might be readable for another user..) Regards, Stian

2 2

[Dovecot] dovecot, search and i18n
by Alex Povolotsky 20 Jun '06

20 Jun '06

Hello! Does dovecot support i18n'd search? Alex.

2 1

[Dovecot] Shared Folder's, Separate Index's, not 'Working'
by Timothy White 20 Jun '06

20 Jun '06

Looking back through the mail, I found the following from March --- On Thu, 2006-03-23 at 16:15 +0000, Mark Lidstone wrote: > Hi all, > > I was wondering if the above was possible. I know that the "seen" > flag is stored in the filename, but was wondering if anyone knew of a > way to separate it out? I know this would strictly-speaking break > maildir compatibility, but it would be extremely useful for shared > folders. The way this worked at one point was by making each user have separate index file for the mailbox, then keeping the \Seen flag only inside that index file and ignoring the maildir's seen flag completely. Then I rewrote the maildir syncing code and this part was dropped out. Probably wouldn't be too difficult to make it work again.. Yea, looks like it wasn't. Works now in CVS. --- I'm trying to do a similar thing now, but without 100% luck. I have the following namespaces defined namespace public { separator = / prefix = Public/ location = maildir:/var/mail/scouts/public:CONTROL=/var/mail/scouts/%1n/%n/shared-settings/public/control:INDEX=/var/mail/scouts/%1n/%n/shared-settings/public/index hidden = no } namespace public { separator = / prefix = Official/ location = maildir:/var/mail/scouts/official::INDEX=/var/mail/scouts/%1n/%n/shared-settings/official/index hidden = no } Even though I have separate INDEX's for the second public namespace, the SEEN flag doesn't seem to be picked up from the users' INDEX's. BUT, for the first namespace, when I have CONTROL defined as well, it IS picked up! The reason I don't want CONTROL defined for the second name space, is I discovered that I can force all users on the system, to be subscribed to mailboxes in the 'Official' name space, if I keep CONTROL with the mailbox, instead of separate, and ensure that once I have set up the subscriptions file, I ensure it can't be changed. The counter side of this 'subscriptions' hack, is that I can't do hidden=yes. Ideally, I want a method of forcing a subscription on every user, that they can't change, but still preserving the SEEN flag. The closest I have come to, is, separate CONTROL, INDEX, and hidden=yes. This requires though, that I use the SquirrelMail forced subscriptions extension, which I've not yet tested. The other idea I had, was a method for having subscriptions come out of a database, seeing as I already have a large block of user data in the SQL database, and if I could have subscriptions in there as well, that would be a huge bonus! (Even better if it was only for the namespaces I wanted, cause I don't need to put each users personal subscriptions in a database). Anyway, it's mainly ideas, other than the SEEN flag issue I described above. Hope someone has ideas for getting it to work. Tim -- Linux Counter user #273956

1 0

[Dovecot] About RH patches and 1.0beta8
by Oliver Schulze L. 20 Jun '06

20 Jun '06

Hi, I just started building dovecot 1.0beta8 on RHEL4.3 based on atrpm.net .spec file. I noted that 3 patches are included in the .src.rpm and wanted to discuss them. I'm interested in knowing if those patches are relevant to all dovecot users and if they can be applied to dovecot. From: http://dl.atrpms.net/all/dovecot-1.0-0_10.99.beta7.el4.at.src.rpm patch: dovecot-1.0.beta2-mkcert-permissions.patch calls 'chown root.root', is good to have the certs owned by root? patch: dovecot-1.0.beta2-pam-setcred.patch is dissables the call to pam_setcred() because there is no other call to pam_setcred() in order to release the resources patch: dovecot-1.0.beta2-pam-tty.patch it add a call to pam_set_item() I don't to attach the patches to the list, but I can if anyone could not extract them from the .src.rpm Many thanks Oliver -- Oliver Schulze L. <oliver(a)samera.com.py>

5 5

[Dovecot] "GETQUOTA" Working?
by richs＠whidbey.net 20 Jun '06

20 Jun '06

Using beta9, I've tried "quota = dirsize:storage=10240" and "quota = maildir:storage=10240", but I can't seem to get the IMAP commands to respond: * OK Dovecot ready. a LOGIN user pass a OK Logged in. b CAPABILITY * CAPABILITY IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS b OK Capability completed. c GETQUOTAROOT INBOX c BAD Error in IMAP command GETQUOTAROOT: Unknown command. d GETQUOTA "" d BAD Error in IMAP command GETQUOTA: Unknown command. e LOGOUT * BYE Logging out e OK Logout completed. (Per http://www.faqs.org/rfcs/rfc2087.html) Apparently "QUOTA" isn't being advertised, and none of the commands are accepted. Any ideas? Rich

1 1

[Dovecot] 1.0.beta9 released
by Timo Sirainen 19 Jun '06

19 Jun '06

Fixes a lot of bugs. The next release will be the first "release candidate" instead of a beta. * PAM: Don't call pam_setcred() unless setcred=yes PAM passdb argument was given. * Moved around settings in dovecot-example.conf to be in more logical groups. + Local delivery agent (deliver binary) works again. + LDAP: Added support for SASL binding. Patch by Geert Jansen + ssl_verify_client_cert: Check CRLs. If auth_verbose=yes, log invalid sent certificates. If verbose_ssl=yes, log even the valid certificates. When using the username from the certificate, use CommonName. Based on patch by HenkJan Wolthuis + PAM: Set PAM_TTY which is needed by some PAM plugins + dovecot --exec-mail ext <binary path> can now be used to start binaries which want dovecot.conf to be read, for example the convert-tool. - Expunging needed to be done twice if client used STORE +FLAGS.SILENT command to set the \Deleted flags - Added sql_escape_string() to lib-sql API and use it instead of normal \-escaping. - ACL plugin fixes - DIGEST-MD5: Trying to use subsequent authentication crashed dovecot-auth. - Fetching BODY when BODYSTRUCTURE was already cached caused the reply to be broken in some cases - Lots of fixes for index file handling - dbox fixes and changes - mbox syncing broke if some extraneous/broken headers were removed (eg. extra X-IMAPbase headers in mails) - Running Dovecot from inetd work now properly with POP3 - Quota plugin fixes for calculating the quota correctly

8 13

[Dovecot] Help! Uidlist files are gone and won't come back; imap keeps coredumping!
by Mario Nigrovic-rvvk40 19 Jun '06

19 Jun '06

Folks - Some time ago as I migrated to dovecot 1.0, I ran into all sorts of problems with file locks, and I tried various solutions. Apparently, in the process, I got a bit careless and removed all my dovecot-uidlist files. They're gone. My understanding, however, is that they should come back, but this doesn't happen. I've been forced to run with index=MEMORY in 1.0 for the entire time I've been using it, but I would really like to get back to a more standard configuration. Yet, anything I do to try and actually use index files, whether (locally) on /var or (via NFS) in /home, I run into problems. The log files say: dovecot: Jun 01 07:36:36 Info: imap-login: Login: user=<rvvk40>, method=plain, rip=10.69.75.131, lip=172.16.26.151 dovecot: Jun 01 07:36:36 Info: IMAP(rvvk40): Effective uid=10019173, gid=21 dovecot: Jun 01 07:36:36 Info: IMAP(rvvk40): maildir: data=/home/mario/.mail/Maildir dovecot: Jun 01 07:36:36 Info: IMAP(rvvk40): maildir: root=/home/mario/.mail/Maildir, index=/home/mario/.mail/Maildir, control=, inbox= dovecot: Jun 01 07:36:36 Error: child 21207 (imap) killed with signal 11 dovecot: Jun 01 07:36:36 Error: child 21208 (imap) killed with signal 11 dovecot: Jun 01 07:36:36 Error: child 21211 (imap) killed with signal 11 dovecot: Jun 01 07:36:36 Error: child 21212 (imap) killed with signal 11 and a truss says: 29146: execve("/home/mario/tools/SunOS/libexec/dovecot/imap", 0x000407D8, 0x00052850) argc = 1 29146: argv: imap ... 29146: write(1, " * 1 2 4 5 F E T C H".., 2091) = 2091 29146: write(1, " * 1 2 9 5 F E T C H".., 2059) = 2059 29146: write(1, " * 1 3 4 6 F E T C H".., 2056) = 2056 29146: poll(0x000AEC90, 3, 9912) = 1 29146: read(0, " 4 U I D f e t c h ".., 4037) = 173 29146: open64("/home/mario/.mail/Maildir/.Freescale.ATIC.CMOS65/dovecot-uidlist", O_RDONLY) Err#2 ENOENT 29146: Incurred fault #6, FLTBOUNDS %pc = 0xFF133218 29146: siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000 29146: Received signal #11, SIGSEGV [default] 29146: siginfo: SIGSEGV SEGV_MAPERR addr=0x00000000 29146: *** process killed *** Some background info: dovecot is running only for me, so it runs under my UID, from my home directory. % tools/SunOS/sbin/dovecot --version 1.0.beta8 % tools/SunOS/sbin/dovecot --build-options Build options: ioloop=poll openssl Passdb: checkpassword pam passwd passwd-file shadow Userdb: checkpassword passwd passwd-file static % uname -a SunOS velocity 5.8 Generic_117350-06 sun4u sparc What do I have to do to recreate the uidlist files? Mario -- I don't need a name; my number's just fine. | Mario.Nigrovic(a)freescale.com It's nobody else's -- just mine, all mine. | 480-413-3578 Internal Use Only

4 17

[Dovecot] beta8 + mbox + Thunderbird
by Thomas Hummel 19 Jun '06

19 Jun '06

Hi all, I'm still using beta8 (on FreeBSD 5.4-RELEASE). Recently I put a co-worker who's using Thunderbird (1.5.0.4) on it and he seemed to have lost some messages (which were delivered on the spool since seen on procmail logfile). I switched him on another server to play safe and tried to test it myself but failed to reproduce the issue. I myself use mutt on a daily basis with no problem with that beta8. Did someone experienced the same (I read about some similar issue on the list but with maildir format - I'm using mbox) ? -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

3 4

RE: [Dovecot] MS Exchange SMTP Login problem
by Xavier Romero 19 Jun '06

19 Jun '06

Ok, patched and working perfectly !! Thank you!!! Xavier Romero. -----Mensaje original----- De: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] En nombre de Timo Sirainen Enviado el: lunes, 19 de junio de 2006 12:49 Para: Xavier Romero CC: dovecot(a)dovecot.org Asunto: Re: [Dovecot] MS Exchange SMTP Login problem On Mon, 2006-06-19 at 12:43 +0200, Xavier Romero wrote: > But it seems that the way Exchange talks to our server, dovecot gets > confused, and password is used instead username for user lookups, so > authentication fails. Fixed in next version, or use a patch: http://dovecot.org/list/dovecot-cvs/2006-June/005765.html

1 0

[Dovecot] MS Exchange SMTP Login problem
by Xavier Romero 19 Jun '06

19 Jun '06

Hello, I'm using dovecot & postfix to bring smtp auth to our customers. Normal mail clients have no problem at all and I'm so satisfied. However, we're having problems with Microsoft Exchange server clients. We're using our postfix-dovecot server as smarhost for several Exchange Servers, and we wish to use TLS + basic authentication for these outgoing mails. But it seems that the way Exchange talks to our server, dovecot gets confused, and password is used instead username for user lookups, so authentication fails. Info: auth(default_with_listener): client in: AUTH 5 login service=smtp resp=bXlfdXNlcm5hbWU= //(resp=my_username) Info: auth(default_with_listener): client out: CONT 5 VXNlcm5hbWU6 //(Username:) Info: auth(default_with_listener): client in: CONT 5 bXlfcGFzc3dvcmQ= //(my_password) Info: auth(default_with_listener): client out: CONT 5 UGFzc3dvcmQ6 //(Password:) Info: auth(default_with_listener): client in: CONT 5 bXlfcGFzc3dvcmQ= //(my_password) Info: auth(default_with_listener): sql(my_user): query: SELECT user, password FROM users WHERE user = 'my_password' Info: auth(default_with_listener): sql(my_user): unknown user Info: auth(default_with_listener): client out: FAIL 5 user=my_password Any clue if there is a way to make it work, either modifiying Exchange or dovecot settings? Thank you very much! Xavier Romero.

2 1

Re: [Dovecot] Problem with Dovecot LDA / Postfix
by Dominique Feyer 19 Jun '06

19 Jun '06

Thanks. The log is really useful ;-) **** deliver(info(a)lda.net4all.ch): Fatal: Running as root isn't permitted **** So it's not possible acutally to use LDA to deliver mail with different UID/GID So I need the change all the owner for my mail storage ... update the DB and restart the service ... it's bad !!! I need a lots of downtime to change the owner of 80Go data storage. So beafore that, I need to test the dovecot-sieve plugin from CVS. Next month a lot of my customer are in holiday and the need auto responders ;-) I try the dovecot-sieve plugin from the CVS and I have this error when i start make (configure as no error): libsieve.a(script.o)(.text+0xa23): In function `sieve_script_load': /usr/src/dovecot-sieve/src/libsieve/script.c:435: undefined reference to `map_refresh' libsieve.a(script.o)(.text+0xaf0): In function `sieve_script_unload': /usr/src/dovecot-sieve/src/libsieve/script.c:462: undefined reference to `map_free' libsieve.a(sieve.o)(.text+0x1e6e): In function `verify_flag': /usr/src/dovecot-sieve/src/libsieve/sieve.y:951: undefined reference to `imparse_isatom' collect2: ld returned 1 exit status make[3]: *** [sievec] Erreur 1 make[3]: Leaving directory `/usr/src/dovecot-sieve/src/libsieve' make[2]: *** [all-recursive] Erreur 1 make[2]: Leaving directory `/usr/src/dovecot-sieve/src' make[1]: *** [all-recursive] Erreur 1 make[1]: Leaving directory `/usr/src/dovecot-sieve' make: *** [all-recursive-am] Erreur 2 I have the same error last week when I try to build dovecot-lda with sieve script support from the CVS. I use Debian Sarge. I think the macro imparse_isatom is from the cyrus-imapd project. I try to install cyrus-dec and cyrus21-dev with apt-get ... but always the same error. Do you have a idea ? Le vendredi 16 juin 2006 à 10:44 -0400, My BSD a écrit : > On Fri, 16 Jun 2006 14:44:51 +0200 > Dominique Feyer <dfeyer(a)net4all.ch> wrote: > > > I have only postfix log (in syslog mail facility), no dovecot log from > > the LDA deliver binary (with mail_debug = yes), this is strange ... > > > > Jun 16 14:37:58 mail2 postfix/pickup[6014]: 5407F7FF3: uid=0 > > from=<root> Jun 16 14:37:58 mail2 postfix/cleanup[6073]: 5407F7FF3: > > message-id=<20060616123758.5407F7FF3(a)mail2.clm.net4all.ch> > > Jun 16 14:37:58 mail2 postfix/qmgr[6015]: 5407F7FF3: > > from=<root(a)localhost.localdomain>, size=326, nrcpt=1 (queue active) > > Jun 16 14:37:58 mail2 postfix/pipe[6076]: 5407F7FF3: > > to=<info(a)lda.net4all.ch>, relay=dovecot, delay=0, status=bounced > > (Command died with status 89: > > "/usr/local/dovecot-1.0-beta9/libexec/dovecot/deliver") > > > > Can i activate log for the LDA in the configuration file or deliver > > command argument in master.cf ? > > > ... > > My dovecot setup logs to a file, settings below: > > ---------------------------------------------- > mail_debug = yes > log_path = /var/log/dovecot/dovecot > info_log_path = /var/log/dovecot/dovecot.info > ---------------------------------------------- > > Make sure that the socket user has write access to the file, otherwise > it won't work (and thinking of it, also make sure that the socket user > also has access to the socket itself -- that was one of my biggest > problems before I got it to work). > > You may also want to add the following until you get it working: > > ---------------------------------------------- > auth_verbose = yes > auth_debug = yes > auth_debug_passwords = yes > ---------------------------------------------- > > Good luck! > -- Dominique Feyer Administrateur Système Ch. de la Colline 5bis CH-1007 Lausanne dfeyer(a)net4all.ch

3 4

[Dovecot] Problem with default_mail_env in beta9
by Andreas Schulze 19 Jun '06

19 Jun '06

Hallo, I am playing arround with dovecot I hat version 1.0.beta7 running fine. After installing beta9 there is a problem with default_mail_env setting. I have all users in ldap. there is an attribute "mailMessageStore" which contains a relative path to users maildir mailMessageStore: sca/ my mailer completes this relative pathinformation to /var/mail/sca/ therefor I setup default_mail_env to "maildir:/var/mail/%h" dovecot-ldap.conf includes "user_attrs = mailMessageStore=home,uidNumber=uid,gidNumber=gid" all fine in beta7 in beta9 I got this in my log: dovecot: Jun 16 14:50:22 Info: Dovecot v1.0.beta9 starting up dovecot: Jun 16 14:50:30 Info: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=127.0.0.1 rip=127.0.0.1 resp=random dovecot: Jun 16 14:50:30 Info: auth(default): ldap(sca,127.0.0.1): bind search: base=o=datev,c=de filter=(uid=sca) dovecot: Jun 16 14:50:30 Info: auth(default): client out: OK 1 user=sca dovecot: Jun 16 14:50:30 Info: auth(default): master in: REQUEST 1 30400 1 dovecot: Jun 16 14:50:30 Info: auth(default): ldap(sca,127.0.0.1): base=o=datev,c=de scope=subtree filter=(uid=sca) fields=mailMessageStore,uidNumber,gidNumber dovecot: Jun 16 14:50:30 Info: auth(default): master out: USER 1 t02985a home=sca/ uid=30014 gid=30007 dovecot: Jun 16 14:50:30 Info: pop3-login: Login: user=<sca>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1 dovecot: Jun 16 14:50:30 Error: POP3(sca): dovecot: Jun 16 14:50:30 Fatal: chdir(sca/) failed with uid 30014: Permission denied dovecot: Jun 16 14:50:30 Error: child 30407 (pop3) returned error 89 If I change user_attrs to "user_attrs = mailMessageStore=FOO,uidNumber=uid,gidNumber=gid" I got dovecot: Jun 16 14:54:36 Info: Dovecot v1.0.beta9 starting up dovecot: Jun 16 14:54:41 Info: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=127.0.0.1 rip=127.0.0.1 resp=random dovecot: Jun 16 14:54:41 Info: auth(default): ldap(sca,127.0.0.1): bind search: base=o=datev,c=de filter=(uid=sca) dovecot: Jun 16 14:54:41 Info: auth(default): client out: OK 1 user=sca dovecot: Jun 16 14:54:41 Info: auth(default): master in: REQUEST 1 30475 1 dovecot: Jun 16 14:54:41 Info: auth(default): ldap(sca,127.0.0.1): base=o=datev,c=de scope=subtree filter=(uid=sca) fields=mailmessagestore,uidNumber,gidNumber dovecot: Jun 16 14:54:41 Info: auth(default): master out: USER 1 sca uid=30014 gid=30007 dovecot: Jun 16 14:54:41 Info: pop3-login: Login: user=<sca>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1 dovecot: Jun 16 14:54:41 Info: POP3(sca): Effective uid=30014, gid=30007 dovecot: Jun 16 14:54:41 Info: POP3(sca): maildir: data=/var/mail//HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB dovecot: Jun 16 14:54:41 Info: POP3(sca): maildir: root=/var/mail//HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB, index=/var/mail//HOME_DIRECTORY_USED_BUT_NOT_GIVEN_BY_USERDB, control=, inbox= this inicates to me, that 1. homedirvariable is unset OK, because I assigned mailMessageStore to local FOO 2. default_mail_env is correct evaluated to maildir:/var/mail/%h Question: Why is default_mail_env not correct evalueted to maildir:/var/mail/sca/ if sca/ is set as homedir ? As mentions above, this worked fine with beta7 ... What do I wrong ??? My I provide more Informations ? -- Andreas Schulze DATEV eG, Paumgartner Strasse 6-14, D - 90429 Nürnberg Abt. Internet- und Securitydienste Telefon : +49 911 276 2648 Telefax : +49 911 276 7892 Mobil : +49 172 8122883 E-Mail : andreas.schulze_at_datev.de

2 3

[Dovecot] building dovecot lda on solaris 9
by lenny＠edpausa.com 18 Jun '06

18 Jun '06

Trying to build the latest CVS code of LDA against dovecot beta 9. Running autogen script I'm getting this message. I added the contents of /usr/local/share/aclocal/ to /usr/local/share/libtool/libltdl/aclocal.m4 #aclocaldir = /usr/local/share/aclocal/ aclocal_DATA = libmcrypt.m4 libtool.m4 ltdl.m4 but no luck. any advise ? /usr/local/share/aclocal/libmcrypt.m4:17: warning: underquoted definition of AM_PATH_LIBMCRYPT run info '(automake)Extending aclocal' or see http://sources.redhat.com/automake/automake.html#Extending-aclocal autom4te: unknown language: Autoconf-without-aclocal-m4 aclocal: autom4te failed with exit status: 1 autoheader: `lda-config.h.in' is unchanged You should add the contents of `/usr/local/share/aclocal/libtool.m4' to `aclocal.m4'. configure.in: no proper invocation of AM_INIT_AUTOMAKE was found. configure.in: You should verify that configure.in invokes AM_INIT_AUTOMAKE, configure.in: that aclocal.m4 is present in the top-level directory, configure.in: and that aclocal.m4 was recently regenerated (using aclocal). /usr/local/share/automake-1.9/am/depend2.am: am__fastdepCC does not appear in AM_CONDITIONAL /usr/local/share/automake-1.9/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL src/libsieve/Makefile.am:5: library used but `RANLIB' is undefined src/libsieve/Makefile.am:5: src/libsieve/Makefile.am:5: The usual way to define `RANLIB' is to add `AC_PROG_RANLIB' src/libsieve/Makefile.am:5: to `configure.in' and run `autoconf' again. /usr/local/share/automake-1.9/am/depend2.am: am__fastdepCC does not appear in AM_CONDITIONAL /usr/local/share/automake-1.9/am/depend2.am: AMDEP does not appear in AM_CONDITIONAL

3 4

[Dovecot] LDA - Return-Path missing
by Timothy White 18 Jun '06

18 Jun '06

I seem to have a problem... Deliver relies on Return-Path headers? I tried sending emails from SquirrelMail, and Gmail, and both have caused the same issue (on the recieving end). (I am trying to test this part, the quota exceeded stuff). deliver(joeblogs): Return-Path missing, rejection reason: Quota exceeded I can post email headers, and stuff if needed. Does it need the Return-Path header, shouldn't it rely on the From address, if there is no Return-Path? Tim -- Linux Counter user #273956

2 1

[Dovecot] Dovecot randomly stops responding
by Miguel Saturnino 18 Jun '06

18 Jun '06

Hi! I'm running Dovecot 1.0beta7 on FreeBSD 6.0 (i386) and it randomly stops responding. To mitigate the problem I made a little ruby scripts which logs in to the POP3 server every 3 minutes and, in case of error (the errors are usually timeout or end of file errors), restarts Dovecot. Although this keeps this keeps things working, I'd like to figure out what is causing Dovecot to stop responding. Looking at the logs, nothing stands out except that there is always one or more of these messages just before Dovecot stops responding: Apr 20 19:25:00 zeus dovecot[62881]: pop3-login: Disconnected: Inactivity: rip=209.123.xxx.xxx, lip=64.21.xxx.xxx Any help debugging this would be greatly appreciated. Thanks, -- Miguel Saturnino <miguel.saturnino(a)teiadigital.pt>

2 3

[Dovecot] Maildir++ implementation issues.
by Apps Lists 18 Jun '06

18 Jun '06

Hi Timo and crew! I'm doing more testing with Dovecot and Maildrop today and have run across some strangeness. It appears as if Maildrop stores updates to the maildirquota file in a way that causes Dovecot to ignore them. In my test scenario, Dovecot just rebuilt my maildirsize file to the following: 0S 86213796 108 After delivering a few messages through Postfix -> Maildrop and have the following maildirsize file: 0S 86213796 108 5102 1 387708 1 5093 1 382406 1 3550 1 268337 1 Note the pretty formatting. These are spaces. Unfortunately, Dovecot seems to ignore these when reading the maildirsize file in maildirsize_parse(). It appears to be using sscanf to look for numeric entries: if (sscanf(*lines, "%lld %d", &bytes_diff, &count_diff) != 2) I've read and re-read the maildir++ specification at http://www.inter7.com/courierimap/README.maildirquota.html and can't understand why Maildrop implements things this way. Steve

2 1