- dovecot - dovecot.org

[Dovecot] IMAP QUOTA
by Arun Gupta 30 May '13

30 May '13

Hi, I configured imap quota on dovecot-2.0 with backend Maildir++, after exceeding user quota the sender receiving bounce mails, Is there any way that after exceeding user quota the mail will deliver somewhere else like user spool area? so that after increasing quota user will get the mails. -- Regards, Arun Kumar Gupta ------------------------------------------------------------------------------------------------------------------------------- This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. -------------------------------------------------------------------------------------------------------------------------------

4 3

Re: [Dovecot] IMAP QUOTA
by Arun Gupta 30 May '13

30 May '13

Hi, Thanks for replying... Dear Steffen I search about "slurp" plugin but didn't get it if possible kindly provde me the doc, link etc for the same. Regards, Arun Gupta On Tue, 28 May 2013, Arun Gupta wrote: > I configured imap quota on dovecot-2.0 with backend Maildir++, after > exceeding user quota the sender receiving bounce mails, Is there any way that > after exceeding user quota the mail will deliver somewhere else like user > spool area? so that after increasing quota user will get the mails. Check out the "slurp" plugin and let your MTA deliver mails to, say, /var/mail/<uid> . You will have no Sieve rules then, I think. However, some sort of quota enforcing you will need there, too. - -- Steffen Kaiser ------------------------------------------------------------------------------------------------------------------------------- This e-mail is for the sole use of the intended recipient(s) and may contain confidential and privileged information. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies and the original message. Any unauthorized review, use, disclosure, dissemination, forwarding, printing or copying of this email is strictly prohibited and appropriate legal action will be taken. -------------------------------------------------------------------------------------------------------------------------------

4 4

[Dovecot] Sieve/pigeonhole with Exim and Dovecot LDA
by Sebastian Arcus 30 May '13

30 May '13

I am trying to configure my Dovecot installation to provide Vacation/Out-of-the-office emails using the Sieve plugin. My setup is a little bit peculiar: Internet Internet | ^ V | Provider's POP3 server Provider's SMTP server | ^ V | -------------- getmail | my server | | V | Dovecot LDA ---> Sieve/vacation -----> Exim | V Dovecot my server --------------- Sorry for the ASCII art above - I thought it would be quicker than trying to explain. The trouble I'm having is getting the Dovecot LDA to send successfully through the local exim instance out-of-office replies back to the provider's smtp server - when receiving fresh email from the provider (through getmail). Dovecot LDA tries to send the replies - but Exim freezes them because they don't contain the sender data in the format Exim wants it. Exim can either receive sender info: 1. On the command line, after the "-f" command line switch (but only when called by root or other users passed under "trusted_users" in exim.conf). 2. In the header of the email - in the "From:" field - but only, apparently, if it was called with the "-t" switch. Full exim command line documentation here: http://www.exim.org/exim-html-current/doc/html/spec_html/ch-the_exim_comman… I can't figure out what command line options the Dovecot LDA is using when calling exim. I also couldn't find a way to get Dovecot LDA to pass extra options to exim, when trying to send email. The exim log has the following: 2013-05-20 15:35:15 1UeRBB-0001xc-Ar Frozen (message created with -f <>) I've inspected the frozen message - and it has the correct sender in the "From:" field - but it seems that exim isn't using that, because it wasn't called with the "-t" option. In dovecot.conf, I have the following for Dovecot LDA and sieve: protocols = imap sieve protocol lda { log_path = /var/log/dovecot/dovecot-deliver.log info_log_path = /var/log/dovecot/dovecot-deliver-info.log postmaster_address = admin(a)mydomain.co.uk hostname = mydomain.co.uk mail_plugins = sieve mail_plugin_dir = /usr/lib/dovecot sendmail_path = /usr/sbin/exim } service managesieve-login { inet_listener sieve { port = 4190 } } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } Dovecot LDA is called by getmail using the vmail user - and using the same user it is trying to call exim to deliver the out-of-office replies. I'm using Dovecot 2.2.1 with pigeonhole 0.4.0. I can post the rest of dovecot.conf if it would help. I've read through the stuff at dovecot.org - but all the Dovecot LDA and exim info refers to Exim passing email to Dovecot using Dovecot LDA - not Dovecot LDA sending email out using Exim.

2 8

Re: [Dovecot] Dovecot 2.2 build rpm on Centos6
by Burak GÜRER 30 May '13

30 May '13

On 30-05-2013 10:52, Arto Saraniva wrote: > >> -----Original Message----- >> From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org] >> On Behalf Of Burak GÜRER >> Sent: Thursday, May 30, 2013 10:34 AM >> To: Nikolaos Milas >> Cc: Dovecot Mailing List >> Subject: Re: [Dovecot] Dovecot 2.2 build rpm on Centos6 >> >> On 27-05-2013 16:56, Nikolaos Milas wrote: >>> On 27/5/2013 1:07 μμ, Birta Levente wrote: >>> >>>> I tried to build rpm based on dovecot-2.2.2-2.fc20.src.rpm on Centos >>>> 6.4 >>> You may want to try: >>> >>> dovecot-2.2.2-2.noa.el6.src.rpm >>> >>> which produces: >>> >>> dovecot-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-debuginfo-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-devel-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-mysql-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-pgsql-2.2.2-2.noa.el6.x86_64.rpm >>> dovecot-pigeonhole-2.2.2-2.noa.el6.x86_64.rpm >>> >>> available at: http://www.noa.gr/rpmfiles/ >>> >>> This package is using LTB Project's Openldap RPMs for LDAP linking: >>> >>> http://ltb-project.org/wiki/download#openldap >>> >>> The above Dovecot SRPM has evolved from fakessh's rpms: >>> http://ns.fakessh.eu/rpms/ and I like it because it is clean and >> clear >>> (to me, at least). >>> >>> Nick >> another question.. anybody built dovecot 2.2 on rhel/centos 5 >> >> there is any knowhow or any builded pack > http://www.city-fan.org/ftp/contrib/mail/ > > -arto > thanks arto

1 0

[Dovecot] Dovecot 2.2 build rpm on Centos6
by Birta Levente 30 May '13

30 May '13

Hi list, I tried to build rpm based on dovecot-2.2.2-2.fc20.src.rpm on Centos 6.4 rpmbuild --define 'rhel 64' -ba dovecot-2.2.spec I get this error: checking for C compiler default output file name... configure: error: in `/home/builder/rpmbuild/BUILD/dovecot-2.2.2': configure: error: C compiler cannot create executables See `config.log' for more details. (config.log attached) What I missing? I'm not totally beginner, built dovecot 2.1 rpm-s many times same way like this, but not know mutch about building rpms and with this I just can get to work. Thank you! Levi

6 10

[Dovecot] Perfect LDAP tree
by Evgeny Basov 30 May '13

30 May '13

Hello everybody and Timo. I have the next problem. With LDAP tree like ou=mail | - dc=example1.com,ou=Mail | - mail=box1(a)example1.com,dc=example1.com,ou=Mail | - mail=box2(a)example1.com,dc=example1.com,ou=Mail … | - dc=example2.com,ou=Mail | - mail=box1(a)example2.com,dc=example2.com,ou=Mail | - mail=box2(a)example2.com,dc=example2.com,ou=Mail … and settings in dovecot configuration files auth_bind = yes auth_bind_userdn = mail=%u,dc=%d,ou=mail base = ou=mail user_attrs = \ =home=/var/vmail/%Ld/%Ln, \ =quota_rule=*:storage=%{ldap:mailQuota}M user_filter = (&(objectClass=mailUser)(accountStatus=active)(mail=%u)) pass_attrs = \ =user=%{ldap:mail}, \ =proxy_maybe=yes, \ =host=%{ldap:mailHost}, \ =userdb_home=/var/vmail/%Ld/%Ln, \ =userdb_quota_rule=*:storage=%{ldap:mailQuota}M pass_filter = (&(objectClass=mailUser)(accountStatus=active)(mail=%u)) iterate_attrs = mail=user iterate_filter = (&(objectClass=mailUser)(accountStatus=active)) all works fine. But my soul of perfectionist do not like this configuration because in every mailbox record duplicated information about domain: mail=box1(a)example2.com and dc=example2.com I want to set next LDAP tree ou=mail | - dc=example1.com,ou=Mail | - mail=box1,dc=example1.com,ou=Mail | - mail=box2,dc=example1.com,ou=Mail … | - dc=example2.com,ou=Mail | - mail=box1,dc=example2.com,ou=Mail | - mail=box2,dc=example2.com,ou=Mail … but I don't understand how to limit query to box1(a)example1.com in dc=example1.com,ou=mail without using base=dc=%d,ou=Clients,o=m and how to get working iterate query for all boxes to get list box1(a)example1.com box2(a)example1.com box1(a)example2.com box2(a)example2.com in some command like doveadm quota recalc -A. Is it possible? How to take it?

2 2

[Dovecot] imap/pop problem
by MP Netsai 30 May '13

30 May '13

Dear All, I hope you can help me on this trouble i am getting. I cant seem to get email even though i have given the correct directory for mail location. Here is my config: ===== # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.0 ext4 auth_mechanisms = plain login disable_plaintext_auth = no first_valid_uid = 1001 last_valid_uid = 1001 mail_debug = yes mail_gid = exim mail_location = maildir:/var/mail/virtual/%d/%n mail_uid = exim namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap pop3" service auth { unix_listener auth-userdb { group = exim mode = 0600 user = exim } } ssl_cert = </usr/local/etc/exim/exim.cert ssl_key = </usr/local/etc/exim/exim.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } ===== the virtual email directory is as follows: ===== root@peyote:/var/mail/virtual# ls -l drwx------ 9691 exim exim 266240 May 28 16:17 mydomain.co.zw ===== Mail is moving ok, into the virtual directory. I just cant seem to pop them out of there. I hope someone can get to point me in the right direction. Regards,

2 2

Re: [Dovecot] system account delivery userdb authentication
by Ben Morrow 29 May '13

29 May '13

[Please keep replies on the list.] At 6AM +0200 on 29/05/13 you (Yann Shukor) wrote: > > Although simpler to set up, I chose to steer clear of the single user > representing 'all' because I liked the idea of giving users access to > Usermin allowing them to manage their own password and vacation msg > (+filtering, ...) and furthermore they could login with their username > (domain-less). While it's often convenient to make a distinction between 'system' and 'virtual' users, Dovecot doesn't actually know the difference. It just looks users up in the passdb and userdb you have configured. This means it's perfectly straightforward to do a completely 'virtual user' setup, and then change the passdb to 'pam', which will let the users log in with their ordinary Unix password. To allow users to log in with just a username, all you need to do is make sure the users in the userdb and passdb are listed that way. Userdb passwd and passdb pam naturally are, but there's nothing to stop you using other userdbs if you want to. The only trick here is that if you're using LDA/LMTP then incoming deliveries will (or, at least, usually should) be addressed to a full email address, so you need auth_username_format to trim that back to a username. I don't know anything about Usermin, but if it is trying to set up traditional procmail filtering and vacation(1), you may be in trouble. Or, at least, you may have to give up on using Dovecot to deliver the mail and let Postfix's local(8) and procmail deliver it into maildirs themselves. If you're happy with this, this isn't a problem for Dovecot, but it might be better to go with Sieve filtering instead. Sieve is a newish mail filtering language, designed primarily to be safe (procmail has a nasty habit of letting users run arbitrary programs). Dovecot's LDA has a pretty complete sieve implementation called Pigeonhole (you may need to install it separately), which also supports a protocol called ManageSieve designed for uploading sieve scripts remotely. There are plugins for some webmail systems (and some desktop mail clients, for that matter) which let the user edit their filters in a gooey way; this includes setting up vacation messages. I use Roundcube webmail for this purpose; it also has a perfectly good PAM password- changing plugin. Ben

1 0

[Dovecot] dsync
by Erik Colson 29 May '13

29 May '13

Hi Is dovecot dsync considered an alternative to offlineimap (or others) when both distant and local are IMAP dovecot servers ? I used offlineimap for this, but somehow offlineimap got messed up (more than once, but without me able to explain how it happened). So I'm considering dsync for this purpose... Thanks! -- erik

1 0

[Dovecot] Enable IMAP only for certain users/IP
by Simone Marx :: Edinet Srl 29 May '13

29 May '13

Hi, I'm trying to config dovecot to enable IMAP protocol only for certain IPs and users. The logical steps I've followed are: 1. If a user is trying to login from an IP that I've authorized ( listed in a file) the request is authorized. 2. If not, if the user is listed in a second file the request is authorized. 3. If also this check fails the request is rejected. I'm using PAM for passdb and a passwd-file for userdb: passdb { driver = pam args = session=yes failure_show_msg=yes max_requests=16 cache_key=%u%r%l dovecot-%s } userdb { driver = passwd-file args = /etc/passwd-dovecot } In /etc/pam.d/ there are two files: dovecot-pop3 dovecot-imap dovecot-pop3: #%PAM-1.0 @include common-auth @include common-account @include common-session (for this protocol everything works fine, I don't want to limit it.) dovecot-imap: #%PAM-1.0 @include common-auth auth sufficient pam_listfile.so item=rhost sense=allow file=/etc/dovecot/imaphosts onerr=fail auth required pam_listfile.so item=user sense=allow file=/etc/dovecot/imapusers onerr=fail @include common-account @include common-session If I'm not wrong, once the user is authenticated, PAM checks if the remote IP address is in imaphosts; if it's true, it returns PAM_SUCCESS and stops the execution of the auth block, else if it's false, PAM executes the next line, verifying the presence of the username in imapusers file; if found, then return PAM_SUCCESS, else fail. If this can work, I've a problem with pam_listfile.so and IP addresses: I want to do something smarter than specifying 2^11 IP addresses instead a /21 or IP/netmask Are there alternatives for doing it better? Thanks. Sincerely, Simone Marx.

2 4

[Dovecot] Corrupt index file zlib
by Paul Lim 29 May '13

29 May '13

Hi, I'm getting this error constantly on a couple of folders. No matter what I do it keeps recurring. -- 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Cached message size smaller than expected (2551 < 8192) 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Maildir filename has wrong S value, renamed the file from /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S to /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Corrupted index cache file /home/archarch.com.au/nj/.***.Builders/dovecot.index.cache: Broken /physical size for mail UID 13 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Cached message size smaller than expected (2551 < 8284) 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Maildir filename has wrong S value, renamed the file from /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S to /home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595.pygmy,S= /2551:2,S 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: Corrupted index cache file /home/archarch.com.au/nj/.***.Builders/dovecot.index.cache: Broken /physical size for mail UID 13 2013-05-29 14:15:03 imap(nj(a)***.com.au): Error: read(/home/***.com.au/nj/.***.Builders/cur/1369030267.M775209P12595. pygmy,S=2551:2,S) failed: Input/output error (uid=13) --- stuff I've done: - Deleted dovecot* in .Builders/ - run maildir-size-fix.pl -v -r -f- c on .Builders/ - delete and recreate the folder Dovecot 2.1.7 (wheezy) zlib enabled maildir_broken_filename_sizes = yes There are only 6 emails, so it's only building dovecot.index.log, not the cache file --- dovecot-uidlist --- 3 V1317717759 N1 G1b2d4a37936fa551430d0000c0318918 1 :1369030267.M775209P12595.pygmy,S=8284 2 :1369030564.M957106P12595.pygmy,S=13188 3 :1369030568.M223636P12595.pygmy,S=23270 4 :1369030568.M223637P12595.pygmy,S=10813 5 :1369030568.M223638P12595.pygmy,S=58600 6 :1369030615.M783237P12595.pygmy,S=9677 7 :1369030267.M775209P12595.pygmy,S=2551 8 :1369030564.M957106P12595.pygmy,S=3560 ----- --- ls cur --- 1369030267.M775209P12595.pygmy,S=8284:2,S 1369030564.M957106P12595.pygmy,S=13188:2,RS 1369030568.M223636P12595.pygmy,S=23270:2,RS 1369030568.M223637P12595.pygmy,S=10813:2,RS 1369030568.M223638P12595.pygmy,S=58600:2,RS 1369030615.M783237P12595.pygmy,S=9677:2,RS ---- It all seems to match... but it continues to break. If I delete the first email file, it breaks on the next one as well. Any thoughts?? I'm thinking I'll probably disable zlib if I can't find a solution... will this mean I have to decompress all the compressed emails? cheers Paul

2 3

[Dovecot] Dovecot 2.1.7-7 only allow localhost access to IMAP and POP3
by Torben Schou Jensen 29 May '13

29 May '13

Recently I have upgraded my server to Debian 7. Debian have now removed uw-imapd and suggest using dovecot instead. Debian include dovecot version 2.1.7-7. On http://www.debian-administration.org/articles/275 and http://www.debian-administration.org/articles/200 I can read how to setup older version of dovecot with SquirrelMail. They recommend to use uncrypted IMAP when SquirrelMail is on same server. What I would like to support is then imap, imaps, pop3 and pop3s. imaps and pop3s for external users. imap and pop3 only open for localhost, that is SquirrelMail on same machine. With dovecot 1 you could restrict access using "imap_listen = localhost" How do I make the same restriction with localhost on dovecot 2 ??? Brgds Torben

3 2

[Dovecot] dsync Panic: Unknown key: send_mail_requests
by Oli Schacher 29 May '13

29 May '13

Hi Timo With the current dovecot hg we're getting dsync replication errors "Panic: Unknown key: send_mail_requests" followed by a crash. This seems to have been introduced somewhere around http://hg.dovecot.org/dovecot-2.2/rev/4883a8e1db13 Log output from latest hg, 2.2.2 (e7c474011934+): May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Panic: Unknown key: send_mail_requests May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x5f7da) [0x7f84f84637da] -> /usr/lib64/dovecot/libdovecot.so.0(+0x5f826) [0x7f84f8463826] -> /usr/lib64/dovecot/libdovecot.so.0(+0x2006a) [0x7f84f842406a] -> dovecot/doveadm-server() [0x42c41b] -> dovecot/doveadm-server() [0x42908b] -> dovecot/doveadm-server(dsync_brain_master_init+0x1c9) [0x4186f9] -> dovecot/doveadm-server() [0x416606] -> dovecot/doveadm-server() [0x40c94f] -> dovecot/doveadm-server() [0x414b7a] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f84f8472b66] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) [0x7f84f8473c17] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f84f8472b08] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f84f8428ae3] -> dovecot/doveadm-server(main+0x121) [0x4152c1] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x34de41ecdd] -> dovecot/doveadm-server() [0x40c1b9] May 29 09:30:53 munged03 dovecot: doveadm(luke(a)example.com): Fatal: master: service(doveadm): child 49077 killed with signal 6 (core dumped) dovecot -n is attached Best regards Oli -- message transmitted on 100% recycled electrons

2 1

[Dovecot] Email migration
by Romer Ventura 29 May '13

29 May '13

Hello, So I am currently running dovecot 1.2.11 on Debian 5 for our production email systems. We just deployed some new Debian 7 servers and we will be upgrading to the latest dovecot version. I've been reading the docs, but I wanted to heard some feedback on the import of all my current email into the new installation. We have 320GB worth of email. Any gotchas I should be prepared for? Any complications I should be aware of when importing all these data? Any thoughts would be appreciated. Thanks. <BR CLEAR="ALL"> <hr style="border: 1px solid #CCC;"> <p style="font-style:italic; font-size:8pt; font-family:verdana; color:gray;">This document and attachments may contain technical data controlled under the U.S. International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR) and may not be exported to a Foreign Person, either in the U.S. or abroad, without the proper authorization by the U.S. Department of State or Department of Commerce, whichever is applicable. CONFIDENTIALITY NOTE: This electronic transmission, including all attachments, is directed in confidence solely to the person(s) to whom it is addressed, or an authorized recipient, and may not otherwise be distributed, copied or disclosed. The contents of the transmission may also be subject to intellectual property rights and such rights are expressly claimed and are not waived. If you have received this transmission in error, please notify the sender immediately by return electronic transmission and then immediately delete this transmission, including all attachments, without copying, distributing or disclosing same. The recipient should check this e-mail and any attachments for the presence of viruses. Houston Sigma Technologies L.P. accepts no liability for any damage caused by any virus transmitted by this e-mail.</p>

2 1

[Dovecot] system account delivery userdb authentication
by Yann Shukor 29 May '13

29 May '13

Hi I have a remaining issue with a mail server setup. Composed of Postfix and Dovecot it is is a 'local' mail server At first I relied upon Mysql to store the various parameters, and then switched to a flat file approach I also initially set the server up to handle virtual users, but then I realized that it was destined to manage local system accounts only. So I reconfigured it accordingly Relying on system accounts for authentication means that the domain name component is absent from the username (as opposed to virtual user identifiers) This caused me some difficulty at first with roundcube, but I was able to get around it through a manual adjustment in Mysql The remaining aspect that isn't working is the delivery of emails. The entry in master.cf for dovecot looks looks this: dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/lib/dovecot/deli ver -d ${recipient} The problem is that the recipient equates to the users email address, which can't in fact be used for authentication purposes with system accounts. I then tried replacing recipient with user: dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/lib/dovecot/deliver -d ${user} There seems to be a rights issue because I get the following error: dovecot Fatal: setgid(100(users)) failed with euid=8(mail), gid=8(mail), egid=8(mail): Operation not permitted Any ideas ? thanks yann # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.7 ext4 log_timestamp: %d-%m-%Y %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/postfix.pem ssl_key_file: /etc/ssl/private/postfix.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/var/mail/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: auth_socket_path: /var/run/dovecot/auth-master postmaster_address: postmaster(a)holinice.com mail_plugins: sieve log_path: syslog_facility: mail auth default: mechanisms: plain login verbose: yes passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 432 user: mail group: mail

2 1

[Dovecot] dovecot + virtio (9p2000.L) = errors
by epek＠gmx.net 28 May '13

28 May '13

Hi! I hope someone knows more about the issues I've encountered in: Setup: I am running dovecot 2.1.7 on Debian Wheezy in a virtual machine (kvm-style qemu-kvm: host: ubuntu 13.04/1.4.0-dfsg-1expubuntu). The mail storage is a directory on the host machine mounted via virtfs (9p2000.L) on the guest. Furthermore ISPConfig is involved in that setup, but that should not make any significant difference at that point. Problem resolved: The problem is, that similar to nfs mmap() and dotlocking seem to fail - the mmap issue could be resolved by adding: mmap_disable=yes to dovecot.conf Problem remaining: Still the following errors remain, despite dotlock_use_excl=no May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/.quotausage.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: file dict commit: file_dotlock_open(/var/vmail/mydomain/test/.quotausage) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:51 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: file_dotlock_create(/var/vmail/mydomain/test/Maildir/dovecot-uidlist) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: fstat(/var/vmail/mydomain/test/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 27 12:54:52 host dovecot: imap(test@mydomain): Error: file_dotlock_create(/var/vmail/mydomain/test/Maildir/dovecot-uidlist) failed: No such file or directory The "failed" files are existing on that path - permissions for the configured "vmail" user and group exist (0600). I'd be greatful for any hint on how to resolve that issue - Thanks in advance! Regards Erich

1 0

[Dovecot] put users's mailbox in read only mode
by Frank Bonnet 28 May '13

28 May '13

Hello For internal purpose I need to put some users's mailboxes and IMAP folders in read only mode during few days. We use MBOX format and UNIX real users mode ( FreeBSD 9.1 ) thanks for any info

2 1

[Dovecot] UIDLs problem on migration to dovecot
by Oscar A. Jara 27 May '13

27 May '13

Hello list, I'm about to migrate from Courier 4.6 (POP and IMAP) to Dovecot 1.2. I am currently trying to match UIDLs of both servers to avoid redownload of mails but I could not success. I've already configured dovecot POP3 to format UIDLs like this: pop3_uidl_format = UID%u-%v I also executed the script 'courier-dovecot-migrate.pl' to do the migration in a couple of test accounts but the IDs don't match for all mails and the script didn't report any errors. I have production courier pop3 server running on port 110 and the new dovecot server running on another port. Here I paste some of the missmatches in one of the test accounts: 8827 UID9060-1259354075 | 8827 UID9041-1259354075 8828 UID9061-1259354075 | 8828 UID9023-1259354075 8829 UID9062-1259354075 | 8829 UID9067-1259354075 8830 UID9063-1259354075 | 8830 UID9064-1259354075 8831 UID9064-1259354075 | 8831 UID9043-1259354075 8832 UID9065-1259354075 | 8832 UID9061-1259354075 8833 UID9066-1259354075 | 8833 UID9025-1259354075 8834 UID9067-1259354075 | 8834 UID9047-1259354075 One thing that I don't know if is important is that I am using dovecot-lda since long ago, not courier lda. I don't know what I am missing here and I would appreciate some help. Thank you. __________ Information from ESET Mail Security, version of virus signature database 8381 (20130527) __________ The message was checked by ESET Mail Security. http://www.eset.com

1 0

[Dovecot] Problem with dsync replication : mails are not deleted correctly
by Nicolas ROCHE 27 May '13

27 May '13

Hello, I would like to configure a postfix / dovecot cluster based on ssh / dsync replication. I have two linux serveurs (Oracle RHEL 5 86_64) and I install both sides dovecot (V2.2.2+), postfix (2.10.0) and mysql (Ver 14.12 Distrib 5.0.77). I configured these servers in order to make them replicate, and I created some virtual users. I use some java code in order to send mail (with SMTP) and to get mail (with POP3). When the java code get a mail, it deletes it from mailbox (the flag "DELETED" is set to true). When I send a mail on server A, I can see the mail replicated on both servers A and B : a file containing the message data exists in /home/vmail/test03/new/ in both sides. When I get the mail from server A with my java POP3 client, all is OK : the mail is deleted on both servers A and B (no more file in /home/vmail/test03/new/). The problem is when I send a mail on server A and I get it from server B : I can get the mail, but the mail is not deleted from server B, and neither from server A. When I try a second time to get the mail on server B, then all becomes OK : the mail is deleted on both server A and B. I can reproduce the problem every time. Is it a known bug or not ? If yes, is there a patch ? If no, may the problem come from my config ? Regards, Nicolas. [root@int-proxy1 dovecot-2.2.2-p1]# doveconf -n # 2.2.2: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.el5xen x86_64 Red Hat Enterprise Linux Server release 5.5 (Tikanga) ext3 disable_plaintext_auth = no hostname = int-proxy1 mail_location = maildir:/home/vmail/%u mail_plugins = acl quota notify replication mail_privileged_group = mail mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } plugin { mail_replica = remote:vmail@int-proxy2 replication_full_sync_interval = 1 hours } pop3_uidl_format = %g postmaster_address = postmaster(a)mail.fluid-e.int service aggregator { fifo_listener replication-notify-fifo { mode = 0666 user = vmail } unix_listener replication-notify { mode = 0666 user = vmail } } service auth-worker { user = root } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { mode = 0666 user = vmail } user = root } service config { unix_listener config { user = vmail } } service doveadm { user = vmail } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service replicator { process_min_avail = 1 } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem submission_host = int-proxy1:25 userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = acl quota imap_acl imap_quota mail_log notify }

3 6

[Dovecot] Upgrading 1.2 to 2.x
by Simon B 27 May '13

27 May '13

Hi In an unscheduled maintenance window next week, I will have the opportunity to upgrade to 2.x should I wish to do and provided I can get it working on stage first. My questions: I've seen a lot on the list about the rock-solidness of 1.2 but also some people saying that some versions of 2.x better than others. Is there a recommended version - I don't need bleeding edge, I'd prefer stability, or one most of you can agree on? What am I missing by not upgrading? A few months ago I tried to convert a Dovecot 1.2 config into 2.1 and wasn't very successful. Any tips on how to go about it? Thanks. Simon

2 2

[Dovecot] mixing virtual and system users
by Julien Beauviala 27 May '13

27 May '13

Hello all, I'm setting up a small mail server for aprox 20 users, and I'm trying to keep it really simple so I went the virtual users as text file way, following this page : http://lukas-schulze.de/2012/02/setup-postfix-and-dovecot-on-debian-squeeze… It seemed to work fine except for the 'system' users, and I am stumped by this. Basically the config does not 'see' /etc/aliases, so mail to root or mailman are 'Recipient address rejected: User unknown'. I've added the backup pam as explained by the following page* and tried many permutations in /etc/postfix/main.cf but still not good, systems users are rejected. Obviously something is amiss. * http://wiki2.dovecot.org/Authentication/MultipleDatabases If someone could point me in the right direction, that would be great. The system is debian 6, details of the configuration below. dovecot -n : ------------ # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.7 ext3 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/postfix.pem ssl_key_file: /etc/ssl/private/postfix.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 5000 last_valid_uid: 5000 first_valid_gid: 5000 last_valid_gid: 5000 mail_privileged_group: vmail mail_location: maildir:/var/vmail/%d/%n/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: auth_socket_path: /var/run/dovecot/auth-master postmaster_address: postmaster(a)example.net mail_plugins: sieve log_path: auth default: mechanisms: plain login verbose: yes passdb: driver: pam passdb: driver: passwd-file args: scheme=CRAM-MD5 /etc/dovecot/users.conf userdb: driver: static args: uid=5000 gid=5000 home=/var/vmail/%d/%n allow_all_users=yes userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail postconf -n : ------------- alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix debug_peer_level = 2 inet_interfaces = all mailbox_size_limit = 0 mydestination = localhost mydomain = example.net myhostname = osiris.example.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = $mydomain queue_directory = /var/spool/postfix recipient_delimiter = + relayhost = show_user_unknown_table_name = no smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtp_tls_note_starttls_offer = yes smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name smtpd_helo_required = yes smtpd_helo_restrictions = reject_invalid_helo_hostname smtpd_recipient_restrictions = reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot smtpd_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtpd_tls_cert_file = /etc/ssl/certs/postfix.pem smtpd_tls_key_file = /etc/ssl/private/postfix.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps virtual_gid_maps = static:5000 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = hash:/etc/postfix/virtual_mailbox_domains virtual_mailbox_maps = hash:/etc/postfix/virtual_mailbox_maps virtual_minimum_uid = 100 virtual_transport = dovecot virtual_uid_maps = static:5000 /etc/postfix/virtual_mailbox_domains : -------------------------------------- @example.net OK @osiris.example.net OK /etc/postfix/virtual_mailbox_maps : ----------------------------------- elisabethp(a)example.net example.net/elisabethp /etc/postfix/virtual_alias_maps : --------------------------------- elisabeth(a)example.net elisabethp(a)example.net j.

2 1

[Dovecot] NFS mount permissions
by Patrick Westenberg 26 May '13

26 May '13

Hi everyone, I would like to move my mails from ocfs2 to an NFS share. As the mountpoint and all folders and files belong to nobody/nogroup, dovecot is only able to access the mails if I give full access to "others". I don't like that. How do you NFS-using guys solve this problem? Regards Patrick

3 4

[Dovecot] Problems with Apple Mail: Enter Password for Account "..."
by Frank Röhm 26 May '13

26 May '13

Hello I have on Ubuntu 12.04 a postfix 2.9.3-2 mailserver with dovecot 2.0.19 I get email from my pc (thunderbird), my smartphone (k9mail) and my MacBook (Apple Mail 4.6 - 1085 on Mac OS 10.6.8) all with IMAP and SSL. All is working normally but sometimes I get an error message from my MacBook, which is irritating. It says this (more or less): "Enter Password for Account "..." The IMAP-Server "..." rejected the password for user "..." Enter your password again or cancel. ... o Remember this password in my keychain" The password was NOT wrong, but anyway, if reenter it, Apple Mail won't accept it, the message will come again and again. I guess that dovecot blocks apple mail maybe because the other two clients try to login at the same time? Is there any setting where I could adjust this blocking (if it is blocking) in dovecot? Only if this really is the reason. The issue is coming not regularily but when it comes, often for half an hour I cannot check mails for this account (other accounts on apple mail won't be touched). If I restart Apple Mail, the problem could be fixed, but maybe not. In the logfiles of Dovecot I don't find anything about this. Thank you and kind regards frank

4 4

Re: [Dovecot] Dovecot mysql replication
by Alex Crow 26 May '13

26 May '13

Hi, Balls, the silly script (written in largely incomprehensible perl by a predecessor of mine) is supposed to catch mailing lists, and HR won't let us have it auto-terminate or update... :-( Thanks for giving me an another few hours work :-) Alex On 24/05/13 08:54, Edwardo Garcia wrote: > Alex, you on long vacation? > > Hi, I am on leave, returning on Thursday 9th May If your query is > urgent, please raise contact the team onitdept(a)integrafin.co.uk > <mailto:itdept@integrafin.co.uk>. Regards Alex > > > On Fri, May 24, 2013 at 5:48 PM, Alex Crow <acrow(a)integrafin.co.uk > <mailto:acrow@integrafin.co.uk>> wrote: > > On 24/05/13 08:45, Edwardo Garcia wrote: > > Halo, > > (First time posting, please forgive English is not native) > > Change from Courier to Dovecot 2.1.16 > > Having two server. > > Having mysql on thiz two server, one master, one slave. > > What we wish is slave Dovecot only ask slave mysql, unless > slave mysql not > work when then ask master, we have Postfix do thiz fallover > good, but > Dovecot talk to slave and master no mater what, we think thiz > defeat > fallover as we not want this aktion, but aktion like Postfix. > > The problemo is can not find Dovecot option for thiz in > wiki2.dovecot.org <http://wiki2.dovecot.org>, > is possible? > > > You could set up MySQL in Dual Master mode instead.... > > Alex > > > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean.

1 0

[Dovecot] dovecot-sieve (pigeonhole) -- is is possible to "re-filter" INBOX when filters have been updated?
by Lev Serebryakov 25 May '13

25 May '13

Hello, Dovecot. I want to migrate to webmail (roundcube) over dovecot + sieve (pigeonhole). Now I'm using on-client (The Bat!) filters, but I need to have acccess to my mail everywhere, not only on my workstation. And I wonder, is here simple way to re-filter INBOX after sieve filters have been changed? Any offline (desktop) mail client could run new filters on old messages -- is here any way to do this with dovecot-sieve (pigeonhole)? I'm using postfix + dovecot LMTP to run sieve filters. -- // Black Lion AKA Lev Serebryakov <lev(a)serebryakov.spb.ru>

2 4

[Dovecot] Virtual Servers, or different authentication setups.
by Joshua Gardner 25 May '13

25 May '13

I want to know if there is any virtual server functionality in Dovecot? I would like to have two separate configurations, that access the same email, running in the same Dovecot instance. They would bind different ports and/or IPs, but have different authentication settings. In particular, one would use a PLAIN password scheme, the other SSHA. How would I go about setting up these virtual servers? Or, would I have to run separate instances of Dovecot? If I do have to run separate instances, how do I keep them from interfering with eachother? -Josh

2 1

[Dovecot] Passwordless auth?
by Dan Mahoney, System Admin 25 May '13

25 May '13

Hey all, I'm in the process of writing some scripts which I want to be able to take actions on my local mailbox. (For example, to move a subset of messages to the trash over time, if unread for a week. To act on messages in my learn-spam folder and then delete them). What occured to me as being a Neat Idea is if Dovecot could honor ident (rfc1413) lookups, from trusted hosts (i.e. 127.0.0.1). In this way I get all the benefits of dovecot's indexing being updated and nice locking, but I don't have to leave my password laying around in a plaintext file. (Yes, this assumes I'm running a shell on the mail server. I'm not concerned about the same level of security when you could simply cat my mail spool). I'd definitely consider something like an SSH key with a forced command (I do see questions in the FAQ about making dovecot work over a socket connection), but that forgoes using standard imap clients. I could also create a dovecot-only user with my UID and no other login privileges, but I'd like this to "just work" for anyone. I don't know anything about if dovecot supports X509 auth, but this would require the client libraries to support such a thing, which not all do. I'd love to hear about any other ways people have thought about to do this. Any ideas? -Dan Mahoney -- --------Dan Mahoney-------- Techie, Sysadmin, WebGeek Gushi on efnet/undernet IRC ICQ: 13735144 AIM: LarpGM Site: http://www.gushi.org ---------------------------

7 9

[Dovecot] userdb section order seems important in config file
by Ken A 24 May '13

24 May '13

Hi Timo, et al, I'm using Dovecot 2.2.2, with dict file based quota and a quota_rule in dovecot.conf. I have userdb configured like so: userdb { driver = passwd-file args = /etc/dovecot/passwd-file } userdb { driver = passwd } I get the behavior I want with a single line in the passwd-file for any users that I'd like to override the default quota. BUT, if I list the userdb sections in the reverse order, with the driver=passwd first, then the quotas in passwd-file are ignored. I have a feeling I am counting on undocumented behavior that might change in the future. Or is this okay to depend on? Thanks, Ken -- Ken Anderson Pacific Internet - http://www.pacific.net

1 1

[Dovecot] Store Mails into SQL DB
by Leander S. 24 May '13

24 May '13

Hi, is there an option to store eMails into DB right away instead of storing them as files on the HDD?

3 2

[Dovecot] Is it possible to palce "detailed" (with local+folder@domai.com) messages not to INBOX/folder, but to INBOX/FixedSubfolder/folder?
by Lev Serebryakov 24 May '13

24 May '13

Hello, Dovecot. Now, with enabled "recipient_delimiter = +", "lmtp_save_to_detail_mailbox" and using LMTP, messages with "detail" in address, are placed in auto-created mailboxes. It is great, but what if I want to put all such mailboxes not in inbox directly, but lower in mailbox hierarchy? Is it possible without using sieve? -- // Black Lion AKA Lev Serebryakov <lev(a)serebryakov.spb.ru>

1 0

[Dovecot] How to rewrite header from X-Original-To to Delivered-To
by Kiran Reddy 24 May '13

24 May '13

HiAll, How to rewrite mail headers from X-Original-To to Delivered-To using sieve script. I am using Dovecot-2.2 and Pigeonhole 0.4. Thanks, Kiran Reddy

2 4

[Dovecot] How to rewrite header from X-Original-To to Delivered-To
by Kiran Reddy 24 May '13

24 May '13

HiAll, How to rewrite mail headers from X-Original-To to Delivered-To using sieve script. I am using Dovecot-2.2 and Pigeonhole 0.4. -- Thanks & Regards Kiran Reddy Lead Systems Administrator Unicel Technologies Pvt. Ltd. | C-Block | Second Floor | Vaishnavi Silicon Terrace, 30/1 | Hosur Main Road | Koramangala | Bangalore- 560095 Mobile (+91) 7829007447 Skype My status <skype:kiranreddyi?call> Unicel Technologies <http://www.uniceltech.com/> website <http://www.uniceltech.com/> | newsletter <http://www.uniceltech.com/mediacentre.shtml> | map <http://maps.google.com/maps?f=q&source=embed&hl=en&geocode=&q=UNICEL+Techno…> | email <mailto:kiran@uniceltech.com> <https://www.facebook.com/pages/Unicel-Technologies-Pvt-Ltd/387394831334812><https://www.facebook.com/pages/Unicel-Technologies-Pvt-Ltd/387394831334812> *Confidentiality Note:* This e-mail and any attachments are confidential and may be protected by legal privilege. If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please notify us immediately by returning it to the sender and delete this copy from your system. Thank you for your cooperation.

1 0

[Dovecot] Dovecot 2.2.2 compiling error
by Mart Pirita 23 May '13

23 May '13

Hello. I cant build 2.2.2, but I can build fine version 2.1.16 with same options: RedHat based customized distro, 2.6.28.10 kernel Build options: export CPPFLAGS export LDFLAGS CPPFLAGS=-I/usr/local/ssl/include LDFLAGS=-L/usr/local/ssl/lib ./configure \ --prefix=/usr \ --with-ssl=openssl \ --with-ssldir=/etc/ssl \ --sysconfdir=/etc \ --without-vpopmail \ --with-pam \ --without-bsdauth \ --without-sql \ --without-nss \ --without-ldap \ --without-pgsql \ --without-mysql \ --without-sqlite \ --with-rundir=/var/run/dovecot\ --without-deliver \ --without-gssapi Build error: /bin/sh ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../../.. -I../../../src/lib -I../../../src/lib-test -I../../../src/lib-dict -I../../../src/lib-fs -I../../../src/lib-mail -I../../../src/lib-imap -I../../../src/lib-index -I../../../src/lib-storage -I/usr/local/ssl/include -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -MT index-search.lo -MD -MP -MF .deps/index-search.Tpo -c -o index-search.lo index-search.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../.. -I../../../src/lib -I../../../src/lib-test -I../../../src/lib-dict -I../../../src/lib-fs -I../../../src/lib-mail -I../../../src/lib-imap -I../../../src/lib-index -I../../../src/lib-storage -I/usr/local/ssl/include -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -MT index-search.lo -MD -MP -MF .deps/index-search.Tpo -c index-search.c -fPIC -DPIC -o .libs/index-search.o index-search.c: In function `search_arg_match_text': index-search.c:715: error: size of array `type name' is negative make[5]: *** [index-search.lo] Error 1 make[5]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2/src/lib-storage/index' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2/src/lib-storage/index' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2/src/lib-storage' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/src/redhat/BUILD/dovecot-2.2.2' make: *** [all] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.57532 (%build) Please advise? -- Mart

2 4

[Dovecot] How the does "new" autocreate method works?
by Attila Nagy 23 May '13

23 May '13

Hi, I'm trying to migrate from the deprecated autocreate plugin to the mailbox { auto }setting without success. What do I forget, or misunderstand? I deliver mails via LMTP and log in on IMAP, neither of them create the folders other than the inbox itself. # doveconf -n # 2.2.2: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.1-STABLE amd64 auth_cache_negative_ttl = 0 auth_cache_size = 100 M default_process_limit = 1000 default_vsz_limit = 1 G disable_plaintext_auth = no import_environment = LD_PRELOAD info_log_path = syslog lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lmtp_save_to_detail_mailbox = yes log_path = /var/log/dovecot-errors.log mail_gid = 999 mail_location = maildir:~/Maildir mail_plugins = " quota" mail_temp_dir = /data/tmp mail_uid = 999 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = /usr/local/etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete mailbox_delete mail_log_fields = uid box msgid size flags vsize from subject quota = maildir:User quota quota_warning = storage=95%% quota-warning 95 %h quota_warning2 = storage=80%% quota-warning 80 %h recipient_delimiter = + sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = pop3 imap lmtp service auth { unix_listener auth-userdb { mode = 0600 user = qmailldap } } service lmtp { inet_listener lmtp { port = 24 } user = qmailldap } service managesieve-login { inet_listener sieve { port = 4190 } } service quota-warning { executable = script /usr/local/quota-warning/quota-warning.sh unix_listener quota-warning { user = qmailldap } user = qmailldap } ssl = no userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } userdb { args = /usr/local/etc/dovecot/dovecot-ldap-catchall.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = " quota mail_log notify sieve" } protocol imap { mail_plugins = " quota imap_quota mail_log notify" } Thanks,

2 4

[Dovecot] auth with passwd file , doublepoint in paasword
by Robert Schetterer 23 May '13

23 May '13

Hi, does anyone know if a doublepoint : is in the password how it gets escaped when using http://wiki2.dovecot.org/AuthDatabase/PasswdFile Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 2

[Dovecot] problem with proxy setup
by Claus 23 May '13

23 May '13

Hi all, i have some troubles in the implementation of my proxyconfiguration. i have two kind of users, the first will be proxied to a dovecot backend with masteruser-login, the other one will be proxied to another non-dovecot imapserver with nopassword. Everything looks to work if i use passwd-file like this: user1:{PLAIN}pass1:::::::proxy=y host=192.168.1.1 destuser=user1*masteruser pass=masterpass user2::::::::nopassword proxy=y host=192.168.2.2 In an second step i try the same behavior with sql (postgresql), but there are my problems. In my thinking, the sql query should return the right fields (in passwd-file) like proxy, host, .. but whats the trick, to get only the correct fields i need for the different funktions? first proxy, host, destuser, pass and on the other side nopassword, proxy and host. Maybe i have mistakes in reasoning, but in sql i get in one query always the same fields. I hope someone can give me some hints an tricks. thanks, Claus

2 1

[Dovecot] Error: Initial status notification not received
by Kavish Karkera 23 May '13

23 May '13

Hi , We are getting a below error on our Dovecot POP/IMAP server on every alternate days. Please help us in knowing with the errors are related to May 23 02:40:05 blade7 dovecot: master: Error: service(pop3-login): Initial status notification not received in 30 seconds, k illing the process May 23 02:40:05 blade7 dovecot: master: Error: service(log): child 8697 killed with signal 9 May 23 02:42:04 blade7 dovecot: master: Error: service(pop3-login): Initial status notification not received in 30 seconds, k illing the process May 23 02:42:04 blade7 dovecot: master: Error: service(ssl-params): Initial status notification not received in 30 seconds, k illing the process May 23 02:42:04 blade7 dovecot: master: Error: service(log): Initial status notification not received in 30 seconds, killing the process May 23 02:42:04 blade7 dovecot: master: Error: service(anvil): Initial status notification not received in 30 seconds, killin g the process May 23 02:42:04 blade7 dovecot: master: Error: service(imap-login): Initial status notification not received in 30 seconds, k illing the process Regards, Kavish Karkera

1 0

[Dovecot] LDA and enkive
by Davide 23 May '13

23 May '13

Hi to all is it possible to use dovecot lda to pipe emails into enkive socket? if yes how? -- *Davide Marchi* *T*eorema *F*errara *Srl* Via Spronello, 7 - Ferrara - 44121 Tel. *0532783161* Fax. *0532783368* E-m@il: *davide.marchi(a)mail.cgilfe.it* Skype: *davide.marchi73* Web: *http://www.cgilfe.it* *CONFIDENZIALITA'* *Ai sensi del D.Lgs. 196/2003 si precisa che le informazioni contenute in questo messaggio sono riservate ed a uso esclusivo del destinatario/dei destinatari. Qualora il messaggio in parola Le fosse pervenuto per errore, La invitiamo ad eliminarlo senza copiarlo e a non inoltrarlo a terzi, dandocene gentilmente comunicazione.* *Per favore, pensa all'ambiente. Stampa questa email solo se necessario.*

2 1

[Dovecot] should dovecot store maildir files with CRLF or LF?
by Christoph Anton Mitterer 22 May '13

22 May '13

Hi. I've made a strange observation. When having Dovecot (at least) with maildir and moving (via IMAP) mail received by some client (Evolution 3.4) into it the following happens: Regardless of whether the mail was originally(!) set with CRLF or LF (i.e. when I use netcat to submit the plain SMTP to the relaying MTA). When the client (Evolution) had received the mail via POP3 before moving it via IMAP into Dovecot... then the maildir file within dovecot is all LF. When the client however received it via IMAP, before in turn moving it on via IMAP into Dovecot, then the maildir file is mixed CRLF and LF, i.e. the body is CRLF, the headers are terminated... Well the actually bug here is probably in Evolution (as so many others... o.O)... but I wondered... what is Dovecot expected to write files? Platform end-of-line markers (i.e. LF in case of UNIX) or always network end-of-line markers (CRLF)? Cheers, Chris.

4 5

[Dovecot] dsync Migration Couldn't keep all uids dove 2.1.16
by Robert Schetterer 22 May '13

22 May '13

Hi Timo, using http://wiki2.dovecot.org/Migration/Dsync for migration i am getting this in periods dsync(sys4-test-2(a)example.de): Info: INBOX: Couldn't keep all uids dsync(sys4-test-2(a)example.de): Warning: Mailbox changes caused a desync. You may want to run dsync again. dsync(sys4-test-2(a)example.de): Warning: I/O leak: 0x756547164490 (line 1229, fd 15) dsync(sys4-test-2(a)example.de): Warning: I/O leak: 0x756547164490 (line 1229, fd 10) dsync(sys4-test-2(a)example.de): Warning: Timeout leak: 0x7565471647a0 (line 1316) dsync(sys4-test-2(a)example.de): Warning: Timeout leak: 0x7565471647a0 (line 1316) Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Florian Kirstein

2 4

[Dovecot] ACLs - creating new top level folders
by Ingo Rogalsky 22 May '13

22 May '13

Hi, I'm wondering, whether it's possible, to define an ACL on the mailbox itself. We use Dovecot 1.2.15 (included in Debian 6) and maildir filesystem layout: /home/mail01/user1/Maildir/new \ /home/mail01/user1/Maildir/cur Inbox /home/mail01/user1/Maildir/tmp / /home/mail01/user1/Maildir/.folder1/new \ /home/mail01/user1/Maildir/.folder1/cur folder1 /home/mail01/user1/Maildir/.folder1/tmp / ... Assigning an ACL with full access rights for user2 to the folder Inbox works as expected. user2 can create subfolders of Inbox, too. But he can't create a new folder like folder1 parallel to Inbox. Is there a possibility of defining an ACL on the mailbox of user1 itself? Or do we need to create all subfolders beneath Inbox like this is usual with other IMAP servers? Ingo --- /usr/sbin/dovecot -c /etc/dovecot/dovecot-test.conf -n # 1.2.15: /etc/dovecot/dovecot-test.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.7 base_dir: /var/run/dovecot-test/ log_path(default): /var/log/dovecot-test/error.log log_path(imap): /var/log/dovecot-test/error.log log_path(pop3): /var/log/dovecot-test/error.log log_path(managesieve): /var/log/dovecot-test/managesieve.log info_log_path(default): /var/log/dovecot-test/info.log info_log_path(imap): /var/log/dovecot-test/info.log info_log_path(pop3): /var/log/dovecot-test/info.log info_log_path(managesieve): /var/log/dovecot-test/managesieve.log protocols: imap imaps pop3 pop3s managesieve listen(default): *:10143 listen(imap): *:10143 listen(pop3): *:10110 listen(managesieve): *:12000 ssl_listen(default): *:10943 ssl_listen(imap): *:10943 ssl_listen(pop3): *:10995 ssl_listen(managesieve): ssl_cert_file: /etc/ssl/certs/imap-cert.pem ssl_key_file: /etc/ssl/private/imap-key.pem shutdown_clients: no login_dir: /var/run/dovecot-test//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_max_processes_count: 4096 max_mail_processes: 4096 verbose_proctitle: yes mail_location: maildir:~/Maildir:INDEX=/srv/dovecot/index/%u:CONTROL=/srv/dovecot/control/%u maildir_copy_preserve_filename: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_process_size: 1024 mail_plugins(default): fts fts_squat acl imap_acl mail_plugins(imap): fts fts_squat acl imap_acl mail_plugins(pop3): mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve pop3_lock_session(default): no pop3_lock_session(imap): no pop3_lock_session(pop3): yes pop3_lock_session(managesieve): no pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xv%08Xu pop3_uidl_format(managesieve): %08Xu%08Xv namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: Other Users/%%u/ location: maildir:%%h/Maildir:INDEX=/srv/dovecot/index/%%u:CONTROL=/srv/dovecot/control/%%u list: children lda: postmaster_address: postmaster@... mail_plugins: sieve acl quota_full_tempfail: yes auth_socket_path: /var/run/dovecot-test/auth-master log_path: /var/log/dovecot-test/deliver.log info_log_path: /var/log/dovecot-test/deliver.log auth default: cache_size: 1024 cache_negative_ttl: 0 username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@~ master_user_separator: * debug: yes passdb: driver: passwd-file args: /etc/dovecot/dovecot-passwd.masterusers pass: yes master: yes passdb: driver: passwd-file args: /etc/dovecot/dovecot-passwd passdb: driver: pam userdb: driver: passwd-file args: /etc/dovecot/dovecot-passwd socket: type: listen client: path: /var/run/dovecot-test/auth-client mode: 384 user: vmail master: path: /var/run/dovecot-test/auth-master mode: 384 user: vmail plugin: acl: vfile acl_shared_dict: file:/srv/dovecot/lib/shared-mailboxes sieve: ~/.dovecot.sieve sieve_dir: ~/.pysieved fts: squat fts_squat: partial=4 full=10

3 3

[Dovecot] lda: duplicate prefix?
by Larry Rosenman 22 May '13

22 May '13

I've just started using Dovecot, and can't seem to get the LDA to work. I get the following error: Mar 4 00:47:19 thebighonker dovecot: lda(ler): Error: user ler: Initialization failed: namespace configuration error: Duplicate namespace prefix: "" Mar 4 00:47:19 thebighonker dovecot: lda(ler): Fatal: Invalid user settings. Refer to server log for more information. Mar 4 00:47:19 thebighonker exim[76281]: 1UCPB8-000JqI-L7 == /home/ler/clamav-rules <ler(a)lerctr.org> R=userforward T=address_file_dovecot defer (0): Child process of address_file_dovecot transport returned 75 (could mean temporary error) from command: /usr/local/libexec/dovecot/dovecot-lda dovecot -n attached. the invocation from my exim config for other than inbox: address_file_dovecot: driver = pipe # Use /usr/lib/dovecot/dovecot-lda if using Debian's package. # You may or may not want to add -d $local_part@$domain depending on if you ne ed a userdb lookup done. command = /usr/local/libexec/dovecot/dovecot-lda -f $sender_address -m ~/mail/ ${sg{$address_file}{$home}{}} message_prefix = message_suffix = log_output delivery_date_add envelope_to_add return_path_add #group = mail #mode = 0660 temp_errors = 64 : 69 : 70: 71 : 72 : 73 : 74 : 75 : 78 What am I doing wrong? -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 214-642-9640 (c) E-Mail: larryrtx(a)gmail.com US Mail: 430 Valona Loop, Round Rock, TX 78681-3893

2 9

[Dovecot] dsync-2.2.2 incorrectly synchronizes subscription status of deleted mailbox
by Karol Jurak 22 May '13

22 May '13

Hi, It seems that dsync-2.2.2 doesn't correctly synchronize subscription status of a deleted mailbox. The situation is as follows. There are two servers: A and B, and a test user test_mdbox. Mailboxes (mdbox) of this user on both servers are synchronized. Specifically on both of them there is a Trash/x mailbox. Replication plugin is disabled. I delete Thrash/x mailbox on A with Thunderbird. The relevant IMAP commands issued are: 71 87.068176 10.4.0.13 10.1.107.144 IMAP Request: 9 delete "Trash/x" 72 87.072238 10.1.107.144 10.4.0.13 IMAP Response: 9 OK Delete completed. 73 87.073736 10.4.0.13 10.1.107.144 IMAP Request: 10 unsubscribe "Trash/x" 74 87.085263 10.1.107.144 10.4.0.13 IMAP Response: 10 OK Unsubscribe completed. Inspecting output of 'doveadm mailbox list' and contents of subscriptions file shows that everything is as expected, ie. mailbox was deleted and unsubscribed. Moreover in dovecot.mailbox.log on A the following records appear: #480: delete-mailbox 3f3eb117a51c9a51d8280000f671379f (2013-05-20 14:54:40) #504: delete-dir f91e44cab57821aa456b525c7a2f1d7e (2013-05-20 14:54:40) #528: unsubscribe f91e44cab57821aa456b525c7a2f1d7e (2013-05-20 14:54:40) Subsequently I run 'doveadm sync -u test_mdbox -d'. It causes an entry for Thrash/x to reappear in subscriptions file on both servers and the following records are appended to dovecot.mailbox.log on B: #2112: delete-mailbox 3f3eb117a51c9a51d8280000f671379f (2013-05-20 14:55:49) #2136: delete-dir f91e44cab57821aa456b525c7a2f1d7e (2013-05-20 14:55:49) On A this record is added: #552: subscribe f91e44cab57821aa456b525c7a2f1d7e (2013-05-20 14:55:49) So, in described situation, dsync subscribes a mailbox on a server it was deleted on instead of unsubscribing it on the other one. -- Karol Jurak

2 4

[Dovecot] read only users's mailboxes
by Frank Bonnet 22 May '13

22 May '13

Hello for internal purpose I need to put some users's mailboxes in readonly mode during few days. We use MBOX format and UNIX user mode on a FreeBSD 9.1 box I tried to read-only mount the partition but dovecot does not work this way Any infos welcome

2 2

[Dovecot] Dovecot 2.2.1 LDA and sieve (lack of) errors
by Jim McNamara 22 May '13

22 May '13

Hello again, all. Of course after posting yesterday that all was well with my setup, turns out all is not well. The problem I'm having is with dovecot-lda functioning and making deliveries to my mailbox, but the sieve scripts don't seem to have any effect. Attempts at logging what is/isn't happening have been total failures. Managesieve seems to work fine, port 4190 is open on the server and it allows the tunderbird plugin to function, I can create and edit scripts with the plugin. For some reason it doesn't seem to auto-compile the scripts to binary form, but if I just need to do that manually I can live with it. I only mention the lack of auto-compiling in case that sheds light on what is wrong with the LDA or sieve. I'm running the current dovecot, 2.2.1 along with pigeonhole 0.4.0. Here is the config: root@hostname:/usr/local/dovecot-2.2.1# doveconf -n # 2.2.1: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.0 auth_cache_size = 10 M auth_default_realm = mail.domain.com auth_mechanisms = plain login auth_socket_path = /usr/local/var/run/dovecot/auth-userdb debug_log_path = /dev/stderr default_internal_user = vpopmail default_login_user = vpopmail first_valid_gid = 89 first_valid_uid = 89 hostname = mail.domain.com last_valid_gid = 89 last_valid_uid = 89 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /dev/stderr mail_access_groups = 89 mail_debug = yes mail_gid = 89 mail_location = maildir:%h/Maildir mail_plugins = " quota" mail_privileged_group = 89 mail_uid = 89 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave spamtest spamtestplus vnd.dovecot.debug namespace inbox { inbox = yes location = prefix = separator = . } passdb { driver = vpopmail } plugin { quota = maildir:User quota quota_rule = *:storage=2G quota_warning = storage=95%% quota-warning 95 %u sieve = ~/.sieve/dovecot.sieve sieve_dir = ~/.sieve sieve_extensions = +spamtest +spamtestplus +relational +comparator-i;ascii-numeric +vnd.dovecot.debug } postmaster_address = postmaster(a)mail.domain.com protocols = imap pop3 lmtp sieve sendmail_path = /var/qmail/bin/sendmail service auth-worker { user = $default_internal_user } service auth { unix_listener auth-userdb { group = vchkpw mode = 0600 user = vpopmail } user = $default_internal_user } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 vsz_limit = 64 M } ssl = required ssl_cert = </var/qmail/control/servercert.pem ssl_key = </var/qmail/control/servercert.priv userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol lda { info_log_path = /dev/stderr log_path = /dev/stderr mail_plugins = " quota sieve" } protocol imap { mail_plugins = " quota imap_quota" } protocol pop3 { mail_plugins = " quota quota" } I've set the lda specific logs to /dev/stderr because I'm running dovecot through daemontools, and that is what it logs. Daemontools redirects /dev/stderr to /var/log/qmail/qmail-dovecot/current. I had tried logging to /var/log/dovecot/lda.log, that file exists, the directory is 775 dovecot:dovecot, but the file size remained 0. Very little appears in the dovecot logs with lda - root@hostname:/home/vpopmail/domains/domain.com/jim/.sieve# grep lda /var/log/qmail/qmail-dovecot/current |tai64nlocal 2013-05-16 11:05:49.432026500 May 16 11:05:49 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 11:29:32.386361500 May 16 11:29:32 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 11:54:03.145741500 May 16 11:54:03 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 12:33:40.274543500 May 16 12:33:40 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 12:47:07.202036500 May 16 12:47:07 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-16 13:40:44.548948500 May 16 13:40:44 auth: Debug: master in: USER 1jim(a)domain.com service=lda 2013-05-17 11:50:31.073410500 May 17 11:50:31 auth: Debug: master in: USER 1jim(a)domain.com service=lda The sieve issue is as follows: I have a very simple sieve script. the managaesieve utility accepts the script, here is the contents of the $HOME/.sieve directory: root@hostname:/home/vpopmail/domains/domain.com/jim/.sieve# ls -al total 20 drwx------ 3 vpopmail vchkpw 4096 May 18 02:24 . drwx------ 5 vpopmail vchkpw 4096 May 18 09:39 .. lrwxrwxrwx 1 vpopmail vchkpw 16 May 18 02:22 dovecot.sieve -> night-test.sieve -rw------- 1 vpopmail vchkpw 303 May 18 02:22 dovecot.svbin -rw------- 1 vpopmail vchkpw 315 May 18 02:24 night-test.sieve drwx------ 2 vpopmail vchkpw 4096 May 18 02:24 tmp The contents of dovecot.sieve itself are: root@hostname:/home/vpopmail/domains/domain.com/jim/.sieve# cat dovecot.sieve # # 2013-5-17 # require ["fileinto", "envelope", "vnd.dovecot.debug"]; if header :contains ["from"] "sub1.domain.com" { debug_log "match happened and syntax changed for testing purposes"; fileinto "INBOX.folder2"; } else { debug_log "can't catch a cold when wet snowy and cold"; keep; } The compile of the script works fine as user vpopmail: vpopmail@hostname:~/domains/domain.com/jim/.sieve$ sievec dovecot.sieve /tmp/dovecot.svbin sievec(vpopmail): Debug: Loading modules from directory: /usr/local/lib/dovecot sievec(vpopmail): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so sievec(vpopmail): Debug: Effective uid=89, gid=89, home=/home/vpopmail sievec(vpopmail): Debug: Quota root: name=User quota backend=maildir args= sievec(vpopmail): Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 sievec(vpopmail): Debug: Quota warning: bytes=2040109465 (95%) messages=0 reverse=no command=quota-warning 95 vpopmail sievec(vpopmail): Debug: Quota grace: root=User quota bytes=214748364 (10%) A diff between dovecot.svbin and /tmp/dovecot.svbin shows no difference. Neither of the debug lines show up anywhere in the logs. When I send an email from sub1.domain.com to this server, it ends up in the main inbox rather than INBOX.folder2. Interestingly, if I run sieve-test on the mail, it tells me it should have been moved to INBOX.folder2: vpopmail@hostname:~/domains/domain.com/jim/Maildir/cur$ sieve-test ../../.sieve/dovecot.sieve 1368888104.11471.hostname\,S\=1235\:2\,a sieve-test(vpopmail): Debug: Loading modules from directory: /usr/local/lib/dovecot sieve-test(vpopmail): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so sieve-test(vpopmail): Debug: Effective uid=89, gid=89, home=/home/vpopmail sieve-test(vpopmail): Debug: Quota root: name=User quota backend=maildir args= sieve-test(vpopmail): Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 sieve-test(vpopmail): Debug: Quota warning: bytes=2040109465 (95%) messages=0 reverse=no command=quota-warning 95 vpopmail sieve-test(vpopmail): Debug: Quota grace: root=User quota bytes=214748364 (10%) sieve-test(vpopmail): Debug: Quota root: name=User quota backend=maildir args= sieve-test(vpopmail): Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 sieve-test(vpopmail): Debug: Quota warning: bytes=2040109465 (95%) messages=0 reverse=no command=quota-warning 95 raw mail user sieve-test(vpopmail): Debug: Quota grace: root=User quota bytes=214748364 (10%) sieve-test(vpopmail): Debug: none: root=, index=, indexpvt=, control=, inbox=, alt= dovecot: line 6: info: DEBUG: match happened and syntax changed for testing purposes. Performed actions: * store message in folder: INBOX.folder2 Implicit keep: (none) sieve-test(vpopmail): Info: final result: success And yes, INBOX.folder exists: vpopmail@hostname:~/domains/domain.com/jim/Maildir/cur$ ls -al ../.INBOX.folder2/ total 28 drwx------ 5 vpopmail vchkpw 4096 May 14 10:33 . drwx------ 15 vpopmail vchkpw 4096 May 18 10:42 .. drwx------ 2 vpopmail vchkpw 4096 May 14 10:20 cur -rw------- 1 vpopmail vchkpw 232 May 17 08:07 dovecot.index.log -rw------- 1 vpopmail vchkpw 17 May 14 10:33 dovecot-uidlist -rw------- 1 vpopmail vchkpw 0 May 14 10:20 maildirfolder drwx------ 2 vpopmail vchkpw 4096 May 14 10:20 new drwx------ 2 vpopmail vchkpw 4096 May 14 10:20 tmp Here's the file that calls dovecot-lda for user jim: vpopmail@hostname:~/domains/domain.com/jim$ cat .qmail-default |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/dovecot-lda -d $EXT@$USER Both /var/qmail/bin/preline and /usr/local/libexec/dovecot/dovecot-lda exist. Any idea why my sieve doesn't seem to take effect? Thanks for reading.

2 3

Re: [Dovecot] Outlook 2013 - mounting folders with XLIST
by Hajo Locke 21 May '13

21 May '13

Hello, >> i do some tests with dovecot 2.1.7 and activated a default special-use >> config. To get it work with outlook 2013, i also added XLIST to imap >> capability string. basically this is working. >> >> is somebody also using special-use folders successful with outlook 2013? > yes, testet a few times, works fine, without Junk folder , cause > outlook wants this handled by it own, but i ve seen reg patches to > change this My serverside setup now is completed. I did a lot of tests last weeks and experienced some strange behaviour of some clients. Outlook 2013 is only working when adding XLIST manually to imap_capability imap_capability = +XLIST This is because outlook 2013 not supports rfc 6154 but the deprecated XLIST standard invented by google. So the problem with junkfolder is not a bug in Outlook 2013, in rfc 6154 spamfolder is tagged by \Junk, in XLIST standard \Spam is used. I did see that when using a gmailaccount in outlook 2013. Adding XLIST capability to dovecot seems to be a problem for other Clients. k9 is able to work with rfc 6154 servers. But if k9 finds XLIST and SPECIAL-USE together in capabilitystring it seems to prefer XLIST requests. Because of dovecot is accepting XLIST requests, but outputs rfc 6154 details, k9 seems to be confused and dont finds special Folders. rfc 6154 is similar but not identical to XLIST. If you dont test with really individual foldernames, you get tricked by clients behaviour. I looked around and the most imap-servers of hosting companies etc. provide XLIST feature, Special-USE unfortunately only a few. So i did now some changes to dovecot sources on my own. I added \Spam as allowed special-use attribute and created a new function for XLIST Requests. So if XLIST is requested, Clients gets lines of output with XLIST and \Junk is replaced with \Spam. So all is done in the code and i dont need to change my userdb-config. Testing this server with different clients was successful. All of them did find their special folders and worked fine, outlook 2013 also finds spamfolder now. So this changes contribute to consolidate a deprecated standard but i have to find a way where all users can benefit from new features. This is not a request to change something in dovecot, this is a call to decision makers to support one rfc Standard. Hajo

1 0

[Dovecot] Configure dovecot to provide SASL authentication
by Peter Skensved 21 May '13

21 May '13

Hi, I'm trying to get dovecot to provide SASL authentication for postfix My setup appears to be working but I'm not 100% certain I've got it right. I've come across several examples for dovecot version 1 but I'm running 2.0.9. The output of doveconf -n is here : 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.2.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_debug = yes auth_verbose = yes disable_plaintext_auth = no mbox_write_locks = fcntl passdb { driver = pam } protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } Specifically : are the "service auth", userdb and passdb sections correct ? And the mode ? Or is it too permissive ? For completeness the postfix setup is here : smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous # smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, reject_non_fqdn_helo_hostname, reject_invalid_helo_hostname, permit # smtpd_sender_restrictions = permit_mynetworks, reject_non_fqdn_sender, reject_unknown_sender_domain, permit # smtpd_recipient_restrictions = reject_unauth_pipelining, reject_non_fqdn_recipient, reject_unknown_recipient_domain, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, permit # peter ---- Peter Skensved Dept. of Physics, Queen's University, Kingston, Ontario, Canada

3 2

[Dovecot] How to configure ssl cert chain in dovecot 10-ssl.conf file
by Bu Xiaobing 21 May '13

21 May '13

Hi there, Does anyone know how to do this: "Put all the certificates in the ssl_cert file. For example when using a certificate signed by TDC the correct order is: Dovecot's public certificate TDC SSL Server CA TDC Internet Root CA Globalsign Partners CA " I try to set these parameters in the conf.d/10-ssl.conf as below, but it seems doesn't work. --- ssl_cert = </etc/pki/dovecot/certs/mail.mymailserver.com.crt ssl_cert = </etc/ssl/certs/dovecot/sub.class1.server.ca.pem ssl_cert = </etc/ssl/certs/dovecot/ca.pem ---- I even cat mail.mymailserver.com.crt sub.class1.server.ca.pem certs/dovecot/ca.pem into one singe file, and define ssl_cert = < /path/to/the/singcertfile.pem, but it doesn't work too. In my apache httpd server httpd.conf file I can define: -- SSLCertificateChainFile /etc/pki/dovecot/certs/sub.class1.server.ca.pem SSLCACertificateFile /etc/pki/dovecot/certs/ca.pem -- And it well work fine. Thinks for any suggest. Bu Xiaobing

2 3

[Dovecot] Pigeonhole: extprograms - pipe
by Anes Mukhametov 20 May '13

20 May '13

Hello! I've tried to use extprograms pipe feature but stuck with "Broken pipe" errors in mail log: May 17 15:18:57 backend1 dovecot: lmtp(20338, user(a)domain.tld) Debug: 3VMVFWFKllFyTwAArRg8UA: sieve: action pipe: running program: learn May 17 15:18:57 backend1 dovecot: script: Error: write(response) failed: Broken pipe May 17 15:18:57 backend1 dovecot: lmtp(20338, user(a)domain.tld) 3VMVFWFKllFyTwAArRg8UA: sieve: execution of script /data/mail/storage/domain/user(a)domain.tld/.dovecot.sieve;name=main script failed, but implicit keep was successful (user logfile /data/mail/storage/domain/buser(a)domain.tld/.dovecot.sieve.log should reveal additional details) /data/mail/storage/domain/buser(a)domain.tld/.dovecot.sieve.log: error: msgid=<c7cd36f19be8164addf091a646b8b284(a)domain.tld>: pipe action: failed to pipe message to program `learn': refer to server log for more information. [2013-05-17 15:18:57] ham user(a)domain.tld 50796. Sieve script contents: require ["fileinto","copy","mailbox","vnd.dovecot.pipe"]; if anyof (header :is "Subject" "ham") { pipe :try "learn" ["ham"]; fileinto "INBOX/ham"; stop; } Sieve plugin config uncommented conents: sieve_plugins = sieve_extprograms *sieve_pipe_socket_dir = sieve-pipe* # Define the executed script as parameter to the sieve service executable = script /etc/dovecot/scripts/spam.sh # Use some unprivileged user for executing the program user = nobody # The unix socket located in the sieve_pipe_socket_dir (as defined in the # plugin {} section above) unix_listener sieve-pipe/learn { # LDA/LMTP must have access user = nobody mode = 0777 } } spam.sh is message processing script which interacts with spamassassin. I've tested pipe with spam.sh that redirects stdin to /dev/null and returns 0 but errors were logged anyway. Note that spam.sh runs, getting the message from sieve and processing it to spamassassin without a problem, but "broken pipe" is being logged.

3 4

Re: [Dovecot] Configure dovecot to provide SASL
by Peter Skensved 20 May '13

20 May '13

> > > Am 19.05.2013 17:51, schrieb Peter Skensved: > > service auth { > > unix_listener /var/spool/postfix/private/auth { > > mode = 0666 > > } > > chmod 666 is always a very bad idea > > > service auth { > unix_listener /var/spool/postfix/private/auth { > mode = 0660 > user = postfix > group = postfix > } > } > Thanks for the reply - - all the other sockets in /var/spool/postfix/private have mode 666 ( and the directory itself mode 700 ) but that is probably a question for the postfix list.... peter

1 0