- dovecot - dovecot.org

[Dovecot] HA Mailbox Design
by Nikolaos Milas 13 Aug '12

13 Aug '12

Hi, We would like to implement a Highly Available Mail Server and would like to ask advice on how to architect this. Some details on our setup: Currently we have only one internal mail server (Postfix/Dovecot 2.0 - planning to move to 2.1), receiving mail from a gateway server (filtering spam/viruses) - a Cisco Ironport - which we are considering to replace with one (or a set of) cloud-based Postfix/Amavis-new/SpamAssassin/ClamAV VMs (currently in testing mode). Delivery uses Dovecot LDA. User accounts are LDAP-based. We use Maildir and the load is low (aside spam). Only about 250 users/mailboxes (4G each). All servers are CentOS 5.8 (planning move to 6.3) KVM VMs (on a cloud where we don't have control on the host, but on highly reliable hardware/networks). We can have VMs on two different clouds and we also have at least two different connections (routes) to the cloud(s) (to support HA). Any directions will be appreciated. Hoping to design an HA architecture but aiming to keep it simple and (as much as possible) easily maintainable one. Thanks for your response and help, Nick

5 8

[Dovecot] master user auth problem
by Ibrahim Harrani 13 Aug '12

13 Aug '12

Hi, I tried to setup a master auth authentication. I also use auth_pop3wrapper to authenticate from qmail-ldap. But I could not login with master user. Here is the config. auth_master_user_separator = * passdb { driver = passwd-file args = /usr/local/etc/dovecot/passwd.masterusers master = yes pass = yes } passdb { # Path for checkpassword binary driver = checkpassword args = /var/qmail/bin/auth_popwrapper } userdb { driver = prefetch } cat /opt/surmail/etc/dovecot/passwd.masterusers user:{SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g= The log: #telnet localhost 143 Trying 0.0.0.0... Connected to 0. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] SurGATE Messaging Suite POP3/IMAP ready. o login user(a)domain.com*user password o NO [AUTHORIZATIONFAILED] Authorization failed Aug 09 16:17:44 auth: Debug: auth(user,127.0.0.1,master,<KmGNDdXGrwB/AAAB>): Master user lookup for login: user(a)domain.com Aug 09 16:17:44 auth: Debug: passwd-file(user,127.0.0.1,master,<KmGNDdXGrwB/AAAB>): lookup: user=user file= /usr/local/etc/dovecot/passwd.masterusers Aug 09 16:17:44 auth: Info: passdb(user,127.0.0.1,master,<KmGNDdXGrwB/AAAB>): Master user logging in as user(a)domain.com Aug 09 16:17:44 auth: Debug: checkpassword(user(a)domain.com,127.0.0.1,<KmGNDdXGrwB/AAAB>): execute: /var/qmail/bin/auth_popwrapper /usr/local/dovecot/libexec/dovecot/checkpassword-reply Aug 09 16:17:44 auth: Debug: checkpassword(user(a)domain.com,127.0.0.1,<KmGNDdXGrwB/AAAB>): Received input: Aug 09 16:17:44 auth: Debug: checkpassword(user(a)domain.com,127.0.0.1,<KmGNDdXGrwB/AAAB>): exit_status=3 Aug 09 16:17:44 auth: Info: checkpassword(user(a)domain.com,127.0.0.1,<KmGNDdXGrwB/AAAB>): Login failed (status=3) Aug 09 16:17:46 auth: Debug: client out: FAIL 1 user=user(a)domain.com authz Aug 09 16:18:08 auth: Debug: client in: AUTH 2 PLAIN service=imap secured session=KmGNDdXGrwB/AAAB lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=48047 resp=<hidden>

1 0

[Dovecot] Running spamc during LMTP delivery
by martin f krafft 12 Aug '12

12 Aug '12

Hello list, we are using dovecot-lmtp for delivery to virtual users, and vmm[1] to manage them. 1. http://vmm.localdomain.org/ One nice feature of vmm is that every virtual user has their own UID/GID on the UNIX filesystem. There is no passwd entry, so no shell login, but each user effectively has a home directory and can run commands in isolation and with lowered privileges. This requires dovecot-lmtp because only the LMTP LDA runs with root rights and can drop privileges to become the specific user for which it is delivering mail. We would now like to run SpamAssassin with the possibility of using the antispam plugin to enable virtual users to train their databases. Do you have an idea how I could let dovecot-lmtp invoke spamc? Or an external command as a filter, to be run by the final user? Thanks, -- martin | http://madduck.net/ | http://two.sentenc.es/ "truth is stranger than fiction, but it is because fiction is obliged to stick to possibilities; truth isnt." -- mark twain spamtraps: madduck.bogus(a)madduck.net

4 6

[Dovecot] Exim and Dovecot
by Rafael Nathan 11 Aug '12

11 Aug '12

Hi, I am installing Exim and Dovecot through yum on my Centos 5 x86_64 machine. Exim is unable to find the virtual users. Is there a full-fledged guide to get the two working. Any help is highly appreciated. Regards, Rafael

1 0

[Dovecot] looking for information on Vacation auto-reply
by rob 11 Aug '12

11 Aug '12

Hello We are looking for information on how to use Vacation auto-reply . I've read http://wiki2.dovecot.org/Pigeonhole/Sieve/Usage and a few other pages, but have not found how to set it up. We use sogo and thunderbird . Is there a how to or document for this somewhere? This is our configuration information: dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-2-amd64 x86_64 Debian wheezy/sid auth_mechanisms = plain login auth_username_format = %Ln lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_location = maildir:%h/Maildir mail_plugins = " quota" maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_plugins = quota sieve quota = fs:user quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = storage=60%% quota-warning 60 %u quota_warning4 = storage=40%% quota-warning 40 %u sieve = ~/.dovecot.sieve sieve_before = /etc/dovecot/sieve/spam.sieve sieve_dir = ~/sieve sieve_global_dir = /etc/dovecot/sieve/ } postmaster_address = fbcadmin(a)fantinibakery.com protocols = " imap lmtp sieve" quota_full_tempfail = yes service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = postfix mode = 0600 user = postfix } } service imap-login { service_count = 0 vsz_limit = 128 M } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 1 service_count = 0 vsz_limit = 256 M } service quota-warning { executable = script /fbc/bin/mail/quota-warning.sh user = dovecot } ssl = required ssl_ca = </etc/postfix/ssl/gd_bundle.crt ssl_cert = </etc/postfix/ssl/mail.fantinibakery.com.crt ssl_key = </etc/postfix/ssl/mail.fantinibakery.com.key userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = quota sieve } protocol imap { mail_max_userip_connections = 30 mail_plugins = " quota imap_quota" plugin { antispam_backend = spool2dir antispam_signature = X-DSPAM-Signature antispam_spam = Junk antispam_spool2dir_notspam = /var/spamtrain/not-spam/%%020lu-%u-%%05 antispam_spool2dir_spam = /var/spamtrain/spam/%%020lu-%u-%%05 antispam_trash = Trash antispam_verbose_debug = 1 } } protocol sieve { mail_debug = yes managesieve_implementation_string = Dovecot Pigeonhole }

3 5

[Dovecot] lmtp: Error: mmap failed with file ... dovecot.index.cache: Cannot allocate memory
by David Jonas 10 Aug '12

10 Aug '12

Hello, I have a mailbox with an ungodly number of small messages in it. When new messages are delivered lmtp kicks up an error like the one below. I tried raising the vsz_limit for lmtp but that didn't see to help. Any ideas (besides deleting 400k messages)? Thanks! dovecot: lmtp(6068, user(a)example.com) Error: mmap() failed with file /home/vmail/domains/example.com/user/Maildir/dovecot.index.cache: Cannot allocate memory # ls -lah dovecot.index.cache -rw------- 1 vmail vmail 128M Jul 29 20:16 dovecot.index.cache # doveadm mailbox status -u user(a)example.com all inbox INBOX messages=434118 recent=59848 uidnext=434119 uidvalidity=1293568548 unseen=432625 highestmodseq=14023 vsize=1329486283 guid=f8d48232244a1a4dfe2e0000cb0ad7e0 # doveconf -n ... default_vsz_limit = 256 M service lmtp { inet_listener lmtp { port = 24 } vsz_limit = 256 M }

2 3

[Dovecot] postfix mysql quota map to dovecot dict in mysql
by Benny Pedersen 10 Aug '12

10 Aug '12

currently dovecot dict is CREATE TABLE IF NOT EXISTS `quota` ( `username` varchar(100) COLLATE latin1_general_ci NOT NULL, `bytes` bigint(20) NOT NULL DEFAULT '0', `messages` int(11) NOT NULL DEFAULT '0', PRIMARY KEY (`username`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COLLATE=latin1_general_ci; there is not field that says how much quota each user have, so one cant make a query on how much its left pr user how can i resolve this in dovecot dict ? i like to do an postfix mysql map to temp reject if quota is out of limit -- Benny Pedersen

3 4

[Dovecot] Server side Sieve with virtual users
by Luigi Rosa 10 Aug '12

10 Aug '12

Is there a way to implement server-side filters with Dovecot configured with virtual users (userbase in mysql, a single *NIX user account that owns /var/spool/mail and its content)? Thanks Ciao, luigi -- / +--[Luigi Rosa]-- \ A generation which ignores history has no past... and no future.

3 3

Re: [Dovecot] Server side Sieve with virtual users
by Adrian Minta 09 Aug '12

09 Aug '12

On 08/09/12 20:10, Luigi Rosa wrote: > Adrian Minta said the following on 09/08/2012 18:33: > >>> Is there a way to implement server-side filters with Dovecot >>> configured with >>> virtual users (userbase in mysql, a single *NIX user account that owns >>> /var/spool/mail and its content)? > >> Yes ! > > :) > > And the webpage/wikipage with documentation about this is.... ? > > > Ciao, > luigi > First step is to have a mail system that works without sieve. This is the hard part. Depending on your preferred distro here are two nice webpages for this: http://wiki.mediatemple.net/w/(ve):Install_Postfix_with_Dovecot_on_CentOS http://workaround.org/ispmail Second step is to enable sieve, for witch you only need to uncomment the specific lines from dovecot.conf. For dovecot 1.2, you will have something like: protocols = pop3 pop3s imap imaps managesieve protocol lda { ... mail_plugins: quota sieve } protocol managesieve { } plugin { ... sieve=~/.dovecot.sieve sieve_dir=~/sieve } -- Best regards, Adrian Minta

3 4

[Dovecot] Dovecot LMTP - Delivered-To header weirdness
by Daniel Piddock 09 Aug '12

09 Aug '12

Hi, I'm not sure if this is a deliberate design decision or a technical limitation that I've missed. Please briefly explain if so :). Or a bug or feature request? When LMTP receives a mail with a single recipient it adds a Delivered-To header. However if the message is delivered in a batch that header isn't added. At first I thought maybe the LMTP was doing something with hardlinks but that doesn't appear to be the case (for rather obvious reasons.) Sample headers (single recipient): Return-Path: <user(a)domain.test> Delivered-To: <user(a)domain.test> Received: from mx.domain.test ([127.0.0.1]) by domain.test (Dovecot) with LMTP id ZNTPFX2NI1CcCwAAVMeomg for <user(a)domain.test>; Thu, 09 Aug 2012 11:14:21 +0100 Envelope-to: user(a)domain.test Delivery-date: Thu, 09 Aug 2012 11:14:21 +0100 Received: from host.domain.test ([172.16.252.1]:44058) by relay.domain.test ([172.16.252.120]:25) with esmtp id 1SzPkz-0000lz-7v (Exim 4.80) for user(a)domain.test (return-path <user(a)domain.test>); Thu, 09 Aug 2012 11:14:21 +0100 Message-ID: <50238D7D.2000707(a)domain.test> Date: Thu, 09 Aug 2012 11:14:21 +0100 From: User <user(a)domain.test> To: User <user(a)domain.test> Subject: test And an expansion list: Return-Path: <user(a)domain.test> Received: from mx.domain.test ([127.0.0.1]) by domain.test (Dovecot) with LMTP id Gf+yBmiNI1CECwAAVMeomg ; Thu, 09 Aug 2012 11:14:00 +0100 Envelope-to: expansion(a)domain.test Delivery-date: Thu, 09 Aug 2012 11:14:00 +0100 Received: from host.domain.test ([172.16.252.1]:44053) by relay.domain.test ([172.16.252.120]:25) with esmtp id 1SzPkd-0000ls-Qr (Exim 4.80) for expansion(a)domain.test (return-path <user(a)domain.test>); Thu, 09 Aug 2012 11:13:59 +0100 Message-ID: <50238D67.3090802(a)domain.test> Date: Thu, 09 Aug 2012 11:13:59 +0100 From: User <user(a)domain.test> To: Expansion <expansion(a)domain.test> Subject: test At the moment we've turned off batch delivery in the exim smtp transport (max_rcpt=1). Cheers, Dan -- Daniel Piddock, Systems Administrator, CoreFiling Limited http://www.corefiling.com

3 3

[Dovecot] dovecot rpm packages for CentOS ?
by Spyros Tsiolis 09 Aug '12

09 Aug '12

Hello all again, Has anyone any idea how to get the latest dovecot version for CentOS 5.8 or 6.2 32-bit OS ? I did a quick search and found out that the official version of dovecot for CentOS v5.8 is 1.0.2 (!!). Any repos ? Any ideas :-) ? Thank you all, spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

2 2

Re: [Dovecot] dovecot rpm packages for CentOS ?
by Vladimir Bukov 09 Aug '12

09 Aug '12

On Thu, August 9, 2012 4:31 pm, Spyros Tsiolis wrote: > > Hello all again, > > Has anyone any idea how to get the latest dovecot version for CentOS > > 5.8 or 6.2 32-bit OS ? > > I did a quick search and found out that the official version of dovecot > > for CentOS v5.8 is 1.0.2 (!!). > > > > Any repos ? Any ideas :-) ? > http://www.city-fan.org/ftp/contrib/mail/

2 1

[Dovecot] dovecot+LDAP/AD encoding issue
by Wiethoff, Helge 09 Aug '12

09 Aug '12

Hello everybody, i have a problem with dovecot+Active Directory as Authentication-Service. I am not able to use special characters (äöüß (german umlaut)) within a password. Normally I would suggest that the ldap-query is done in UTF-8 but as I debugged the auth-process, I have seen that the password is ISO-8859-1 encoded. The "original" query (from roundcube for example) is UTF-8 encoded (I dumped the POST-Query). So far I wasn't able to find my error by myself or by searching the web. Maybe someone of you can give me a hint :-) Thanks and greetings from Germany, Helge ---- dovecot --version 2.0.16 ---- D-AS01:/etc/dovecot # grep -v '^ *$#.*$\?$' dovecot-ldap.conf.ext uris = ldap://10.37.5.90 dn = CN=ldap-d-as01,CN=Users,DC=tfh-bochum,DC=de dnpass = xxxx auth_bind = yes ldap_version = 3 base = ou=Benutzer, ou=Lehre, dc=tfh-bochum, dc=de user_attrs = =uid=10000,=gid=10000,=home=/srv/mail/%Ld/%Ln user_filter = mail=%u pass_attrs = =uid=10000,=gid=10000,=home=/srv/mail/%Ld/%Ln pass_filter = (&(mail=%u)(!(extensionAttribute3=*))) ---- dovecot -n # 2.0.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.37.6-0.11-default x86_64 openSUSE 11.4 (x86_64) auth_debug = yes auth_mechanisms = plain login auth_username_translation = %Lu auth_verbose = yes mail_location = maildir:~/Maildir mail_max_userip_connections = 1000 mail_plugins = quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes list = yes location = prefix = INBOX/ separator = / subscriptions = yes type = private } namespace { list = yes location = maildir:%%h/Maildir:INDEX=%h/Maildir/shared/%%u:CONTROL=%h/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = yes type = shared } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/srv/mail/shared-mailboxes quota = maildir:Quota quota_rule = *:storage=1G sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_max_redirects = 10 } protocols = imap pop3 sieve lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0770 user = root } } service imap-login { process_min_avail = 4 service_count = 0 } service managesieve-login { inet_listener sieve { address = * port = 4190 } inet_listener sieve_deprecated { address = * port = 2000 } process_min_avail = 2 service_count = 0 } ssl_ca = </etc/ssl/certs/tfh_dfn_dtag_cacert.pem ssl_cert = </etc/ssl/certs/imap.stud.tfh-bochum.de-20110530-cert-302177588.pem ssl_key = </etc/ssl/private/imap.stud.tfh-bochum.de-20110530.key userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = quota } protocol imap { mail_plugins = quota acl imap_acl imap_quota } protocol pop3 { mail_plugins = quota } ________________________________ Helge Wiethoff Medienzentrum Telefon: +49 (234) 968 8717 Fax: +49 (234) 968 3453 E-Mail: Wiethoff(a)tfh-bochum.de Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum Staatlich anerkannte Fachhochschule der DMT-Gesellschaft für Lehre und Bildung mbH Herner Straße 45 44787 Bochum http://www.tfh-bochum.de ________________________________ Träger: DMT-Gesellschaft für Lehre und Bildung mbH Sitz der Gesellschaft: Bochum Registergericht: Amtsgericht Bochum Handelsregister: B 4052 Geschäftsführung: Prof. Dr. Jürgen Kretschmann (Vorsitzender) Manfred Freitag

3 4

Re: [Dovecot] some mdbox mails get lost each day
by Timo Sirainen 09 Aug '12

09 Aug '12

On 9.8.2012, at 11.24, Christian Rößner wrote: > I had enabled mail_log and search for any kind of errors. None. Only expunge messages from a imap process. Which I thought was Outlook. But isn't. So there is an imap expunge entry for all of the mails that get lost? You should be able to match that with the IMAP client's IP address by using session IDs, for example: mail_log_prefix = "%s(%u) <%{session}>: " Also you may be able to find out what client is doing it by setting: imap_id_log = *

1 0

[Dovecot] Mail deletion and Solr index update
by Matthias Rieber 09 Aug '12

09 Aug '12

Hi, I've deleted 10000s emails and it seems that every mail is removed with a single request from Solrs index. This works, but it's quite slow. Is it possible/plans to improve that? Matthias

2 4

[Dovecot] Quota dict configuration
by Uros 08 Aug '12

08 Aug '12

Hi, I have enabled quota dict with mysql following wiki http://wiki2.dovecot.org/Quota/Dict Everything work as expected. I just have a question about query used for updating quota usage. I already check the source file dict-sql.c but i still can't figure it out. I store user info in a mysql table where only left (user) part of an email address is stored with foreign id for domain conected to domain table. The problem is administration because quota table have primary key whole email. Is there even possible to configure quota dict settings to use separate variables %n and %d like in user and password query? -- lp Uroš

1 0

[Dovecot] Statistics scripts
by Timo Sirainen 08 Aug '12

08 Aug '12

I wrote two scripts, which you can use with the stats plugin enabled to get a better "doveadm stats top" than it currently is: http://dovecot.org/tools/stats-top.pl http://dovecot.org/tools/stats.pl

2 1

[Dovecot] dsync and pop3 migration plugin fails for large inbox due to idle timeout
by Nikolai Schupbach 08 Aug '12

08 Aug '12

Timo, There is a problem with the dsync POP3 migration plugin when syncing a large INBOX. What happens is dsync establishes a connection to the POP3 server at the beginning of the sync, but then it sits there idle until it's used to sync the UIDLs. On a very large inbox with many thousands of messages it will be idle for longer than a POP3 server's idle timeout setting. When the UIDL sync occurs dsync produces the following errors (because the connection has been lost due to the POP3 server's inactivity timeout): dsync(first.last(a)test.co.nz): Error: pop3c(pop3.test.com): Server disconnected unexpectedly dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 13: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 14: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 15: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 16: Disconnected ... dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 14492: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 14493: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 14494: Disconnected Also at the end of the dsync it actually has an exit status of 0, but it shouldn't because the POP3 sync failed, and none of the UIDLs are retained. Dsync should try to keep the POP3 connection alive, by sending a regular 'NOOP' command to the POP3 server, or it should simply reconnect if sees the connection is lost. At the moment the only work around is to increase the POP3 server's idle timeout to a multi hour value, which isn't a good work around as it causes a lot of inactive POP sessions to bank up. Regards, Nikolai.

2 3

Re: [Dovecot] sieve vacation messages trouble
by asier.cidon＠externo.uam.es 08 Aug '12

08 Aug '12

The problem is solved!!!! In the library "src/lib-sieve/plugins/vacation/cmd-vacation.c", in the package "dovecot-sieve" or "dovecot-pigeonhole" modify: smtp_handle = sieve_smtp_open(senv, reply_to, NULL, &f); smtp_handle = sieve_smtp_open(senv, reply_to, reply_from, &f); You can check the correct operation in your logs. /var/log/maillog postfix/smtpd[27112]: connect from smtp.mydomain.com postfix/smtpd[27112]: A95D2168456: client=smtp.mydomain.com postfix/cleanup[27114]: A95D2168456: message-id=<A5BBC98AAF65424CADBFB6ACF0003E8B03FB4B74(a)example.com> postfix/smtpd[27112]: disconnect from smtp.mydomain.com postfix/qmgr[17010]: A95D2168456: from=<asier.cidon(a)example.com>, size=7274, nrcpt=1 (queue active) postfix/pipe[27115]: A95D2168456: to=<asier.cidon(a)mydomain.com>, relay=dovecot, delay=0.09, delays=0.01/0/0/0.08, dsn=2.0.0, status=sent (delivered via dovecot service) postfix/qmgr[17010]: A95D2168456: removed /var/log/dovecot.log dovecot: auth(default): master out: USER 1 asier.cidon(a)mydomain.com uid=xxx gid=xxx quota_rule=*:bytes=524288000 home=/buzon/asier.cidon dovecot: deliver(asier.cidon(a)mydomain.com): sieve: msgid=<A5BBC98AAF65424CADBFB6ACF0003E8B03FB4B74(a)example.com>: sent vacation response to <asier.cidon(a)example.com> dovecot: deliver(asier.cidon(a)mydomain.com): sieve: msgid=<A5BBC98AAF65424CADBFB6ACF0003E8B03FB4B74(a)example.com>: stored mail into mailbox 'INBOX' /var/log/maillog postfix/pickup[17009]: B221D168458: uid=xxx from=<asier.cidon(a)mydomain.com> postfix/cleanup[27114]: B221D168458: message-id=<dovecot-sieve-1344420404-703760-0(a)mda.mydomain.com> postfix/qmgr[17010]: B221D168458: from=<asier.cidon(a)mydomain.com>, size=661, nrcpt=1 (queue active) postfix/smtp[27195]: B221D168458: to=<asier.cidon(a)example.com>, relay=smtpinterno.mydomain.com, delay=0.04, delays=0.01/0/0.01/0.01, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as A3A092280B3) postfix/qmgr[17010]: B221D168458: removed

2 1

[Dovecot] doveadm import is always verbose
by Jürgen Obermann 08 Aug '12

08 Aug '12

Hello, with dovecot versions up to 2.1.9, when I use: doveadm import -u guser mbox:/tmp/mbox/guser/restore_2012-05-08 restore_2012-05-08 all it always sends out info messages for every mail copied like that: doveadm(guser): Info: copy from mymail: box=restore_2012-05-08/mymail, uid=5, msgid=<######>, size=6999462 I had expected to see these info messages only if I add the verbose option to doveadm. And using the option -v with: doveadm -v import -u guser mbox:/tmp/mbox/guser/restore_2012-05-08 restore_2012-05-08 all makes no difference at all, the same messages appear. The verbose option seems to be always on. Is this a bug or intended behaviour? Greetings, Jürgen -- Jürgen Obermann Hochschulrechenzentrum der Justus-Liebig-Universität Gießen Heinrich-Buff-Ring 44 Tel. 0641-9913054

2 1

[Dovecot] Dovecot with Company - level Quota
by Kavish Karkera 08 Aug '12

08 Aug '12

Hi Timo, We are using maildir as quota-backend , and performing user level quota, which is working fine. (using dovecot 2.x ). Now the requirement is to , restrict the quota to client / company level along with user level quota. For. eg. We have a mailbox path like /mail/mailstore/10001/kavish.karkera(a)linoquery.com/Maildir/ where 10001 is Client code (unique number given to very client) instead of domain name. So there would be two quota's one at company level and other user level. Such as 10001(linoquery.com) = 5GB ---> Company Quota kavish.karkera(a)linoquery.com = 0 ? ---> User Quota If the sum of the user quota under 10001/* exceeds the 5GB limit then the mails for that particular domain should get bounced. Please Help , if this is possible. Regards, Kavish Karkera

2 1

[Dovecot] replication chain
by Костырев Александр Алексеевич 08 Aug '12

08 Aug '12

good day! I wonder if it is possible to make a chain of replication in dovecot 2.1.9. Now I'm using two way replication(I use proxy to redirect users) and it's working just fine but is it possible to setup replication like this: serverA ---> serverB --> server C <--- I've added additional mail_replica2 on serverB and after restart dovecot didn't complain about errors, with doveconf -n I am able to see two replica's settings but user's mails aren't replicating to server C. no errors in logs. I want to use server C as backup server with lvm snapshots.

2 1

[Dovecot] error message. Some help please
by Spyros Tsiolis 08 Aug '12

08 Aug '12

Hello all : dovecot -n : # 1.2.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.4.el5 i686 CentOS release 5.5 (Final) ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-info.log ssl_parameters_regenerate: 48 verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_greeting: * Dovecot ready * login_max_processes_count: 64 mail_location: maildir:/var/MailRoot/domains/%d/%n/Maildir mail_plugins: zlib auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/passwd passdb: driver: pam userdb: driver: static args: uid=vmail gid=vmail home=/home/vmail/%u userdb: driver: passwd From the logs : tail -100 /var/log/dovecot/dovecot | more : ......... Jul 06 13:51:20 dovecot: Warning: All login processes are in use. You may need to increase login_max_processes_count Jul 18 15:20:32 dovecot: Warning: All login processes are in use. You may need to increase login_max_processes_count Jul 19 09:16:40 dovecot: Warning: Killed with signal 15 (by pid=3062 uid=0 code=kill) ......... Should I just go ahead and increase login_max_processes_count ? Is it that simple ? Just asking for your feedback and experience chaps. Thank you in advance, Spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

2 1

Re: [Dovecot] connectionlimit for pop3s?
by Joseph Tam 08 Aug '12

08 Aug '12

On Tue, 7 Aug 2012, dovecot-request(a)dovecot.org wrote: > When switching to port 995 to use pop3s he is limited at connection > count. Some people can reach pop3s-server successful, some getting a > timeout. > ... > Somebody knows some typical clientside problems when this problem > occurs? Do the same user(s) have this problem and/or do each user have their own mail configuration for their mail readers? If yes, I would also check that the port and security protocol matches (i.e. clear/TLS/SSL on ports 110/110/995 respectively). Mismatched configurations could cause what you describe. Log messages could also be helpful here. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] how to duplicate users emails to allow deleted recovery?
by Voytek Eymont 08 Aug '12

08 Aug '12

I have a situation where a user deleted emails using iphone, then, wants he sees messages are gone from desktop client, wants them recovered from server, happened several times now is there a way to have all deletes to go to server trash for potential recovery ? off topic: is there a way on iphone to force deletions to server's trash is there a way to have dovecot duplicate all emails to say user_backup(a)dom.tld mail box ? or should I duplicate emails in postfix ? using dovecot 2 with lmpt and virtual domains thanks -- Voytek

1 0

Re: [Dovecot] redirect actions exceeds policy limit
by Mike Greene 07 Aug '12

07 Aug '12

Thank you David, I saw that in the share/docs but we didn't have the /conf.d/ folder or any of the extra conf files in place. I created that directory, copied the file over, made my changes and all is well again. Not sure why things were setup the way they were, after looking at the other files in conf.d it would appear the previous sysadmin had merged a lot of those bits and pieces into the main dovecot.conf file. Perhaps leftovers from v1.x days. Will likely address that down the road when we update that server. Mike Greene Rock Island Technology Solutions, Inc. San Juan Islands, WA. 360-378-5884 x201 > -----Original Message----- > > Date: Mon, 06 Aug 2012 14:46:22 -0400 > From: David Webmailbeta Warden <warden(a)geneseo.edu> > To: <dovecot(a)dovecot.org> > Subject: Re: [Dovecot] redirect actions exceeds policy limit > Message-ID: <f3f600e6dc1974de9bb54da5c4fed10a(a)geneseo.edu> > Content-Type: text/plain; charset="utf-8" > > > > In conf.d/90-sieve.conf we have: > > # The maximum number of redirect > actions that can be performed during > # a single script execution. > > #sieve_max_redirects = 4 > sieve_max_redirects = 25 > > I think that's the > setting you're looking for. > > -David Warden

1 0

[Dovecot] sieve vacation messages trouble
by asier.cidon＠externo.uam.es 07 Aug '12

07 Aug '12

FROM:mailman-bounces@dovecot.org DATE:27. heinäkuuta 2012 16.58.35 UTC+3.00 TO:dovecot-owner@dovecot.org SUBJECT:CONTENT FILTERED MESSAGE NOTIFICATION The attached message matched the dovecot mailing list's content filtering rules and was prevented from being forwarded on to the list membership. You are receiving the only remaining copy of the discarded message. FROM:Asier Cidon Periañez <asier.cidon(a)externo.uam.es> DATE:27. heinäkuuta 2012 16.01.59 UTC+3.00 TO:dovecot@dovecot.org SUBJECT:RE: [DOVECOT] SIEVE VACATION MESSAGES TROUBLE Hi, I have a problem when I define a Filter SIEVE vacation with Horde, Qmail and Dovecot. When I sent the message vacation for domains external, the log of postfix show <"<>"@mymachine>. I am writing you because I saw the post http://www.dovecot.org/list/dovecot/2009-June/040811.html Can you explain me whqt is the solution? Many Thanks.

3 2

[Dovecot] Pigeonhole sieve include namespace regression
by Daniel Piddock 07 Aug '12

07 Aug '12

Hi, We've recently upgraded from Dovecot 1.2.15 with Sieve 0.1.18 (Debian Squeeze) to Dovecot 2.1.8 and Pigeonhole 0.3.1. We provide a selection of global sieve scripts to make users' lives easier and one noticed that some of these have stopped working. I tracked it down to them having personal scripts with the same name. Using a really simple sieve script: require "include"; include :personal "svn"; include :global "svn"; sievec debug output for sieve 0.1.18 (trimmed a bit): * Required extensions: 0: include (16) 1: fileinto (5) * Included personal script 'svn' (block: 3): [script code here] * Included global script 'svn' (block: 4): [script code here] * Main program (block: 1): 00000000: EXTENSIONS [1]: 00000001: include 00000002: INCLUDE: 00000004: script: svn.sieve [ID: 1, BLOCK: 3] 00000006: INCLUDE: 00000008: script: svn.sieve [ID: 2, BLOCK: 4] 0000000a: [End of code] sievec debug output for Pigeonhole 0.3.1: * Required extensions (block: 1): 0: include (id: 16; block: 4) 1: fileinto (id: 5) * Included personal script 'svn' (block: 5): [script code here] * Main program (block: 2): Address Line Code 00000000: DEBUG BLOCK: 3 00000001: EXTENSIONS [1]: 00000002: include 00000003: 2: INCLUDE: 00000005: script: `svn' from /home/notroot/sieve/svn.sieve [ID: 1, BLOCK: 5] 00000007: 3: INCLUDE: 00000009: script: `svn' from /home/notroot/sieve/svn.sieve [ID: 1, BLOCK: 5] 0000000b: 3: [End of code] As can be seen the personal script is included twice. Obvious work around is to rename the personal script. However it'd be nice if namespacing came back. Cheers, Dan -- Daniel Piddock, Systems Administrator, CoreFiling Limited http://www.corefiling.com

2 2

[Dovecot] connectionlimit for pop3s?
by Hajo Locke 07 Aug '12

07 Aug '12

Hello, i have a user who is able to do pop3 on port 110 without problems and without limits. There are ~10 real users using same public IP. When switching to port 995 to use pop3s he is limited at connection count. Some people can reach pop3s-server successful, some getting a timeout. I cant find any errors or limits within my config or in my log, there are no differences between using plain text and using tls. Are there some special loglines to grep for at this situation? Maybe i missed some lines... At the moment i dont see server-side problems. Somebody knows some typical clientside problems when this problem occurs? dovecot version is 1.2.11 Thanks, Hajo

2 1

[Dovecot] LDAP auth with AD
by Chris Visser 07 Aug '12

07 Aug '12

Hi, I'm struggling to setup LDAP authentication with dovecot against an AD server. When I attempt to bind using the same DN I use to do address lookups in exim and to do searches using ldap search on the command line I get the following in my logs: Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: auth client connected (pid=1523) Aug 7 08:55:58 mail-dev dovecot: auth: Error: LDAP: binding failed (dn CN=Linux Sync,CN=Users,DC=RTT,DC=co,DC=za): Invalid credentials, 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1 I'm running CentOS 6 and connect to a Windows 2008 R2 domain. The output from dovecot -n: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.2.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_debug = yes auth_verbose = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl passdb { driver = pam } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } userdb { args = uid=exim gid=exim home=/var/spool/mail/%Ld/%Ln driver = static } And my /etc/dovecot/dovecot-ldap.conf.ext: hosts = dc01.mydomain.com base = dc=mydomain,dc=com dn = CN=Linux Sync,CN=Users,DC=mydomain,DC=com dnpass = mypass deref = never scope = subtree ldap_version = 3 auth_bind = no pass_filter = (&(objectClass=person)(mail=%u)) Chris Visser Linux/Network Infrastructure ================== Please read our Email Disclaimer : http://www.rtt.co.za/disclaimer.html

1 0

[Dovecot] redirect actions exceeds policy limit
by Mike Greene 06 Aug '12

06 Aug '12

Hello, We have a vacation/mail forwarder plugin in squirrel mail that allows customers to forward email. It has come to my attention that there is a limit (appears to be 5) on the number of addresses that can be specified. I'm now trying to track down where this policy limit is set. This is the error we see in the customers .dovecot.sieve.log file: main_script: line 26: error: number of redirect actions exceeds policy limit. sieve: info: started log at Jul 25 07:02:54. I checked the following for possible settings: /usr/local/etc/dovecot/dovecot.conf /usr/local/etc/sieve/dovecot.sieve /usr/local/etc/sieve/global.sieve I didn't see anything specific to limiting the number of redirects. I'm wondering where else I can look to find where this limit is coming from and adjust it upwards. We are using the following dovecot / pigeonhole versions. dovecot-2.0.7 dovecot-pigeonhole-0.2.1 athena# dovecot -n # 2.0.7: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.1-RELEASE amd64 auth_default_realm = rockisland.com auth_mechanisms = plain login cram-md5 auth_username_format = %Lu disable_plaintext_auth = no dotlock_use_excl = yes first_valid_gid = 1000 first_valid_uid = 1000 listen = * mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { quota = maildir quota_rule = *:storage=2G quota_warning = storage=90%% /usr/local/sbin/quota-warning.sh 90 quota_warning2 = storage=80%% /usr/local/sbin/quota-warning.sh 80 sieve = ~/.dovecot.sieve sieve_dir = ~/ sieve_global_dir = /usr/local/etc/sieve/ } protocols = imap pop3 service auth { unix_listener auth-client { mode = 0660 } unix_listener auth-master { group = vmail mode = 0600 user = vmail } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = root } service imap-login { service_count = 0 } service pop3-login { service_count = 0 } ssl_cert = </usr/local/etc/ssl/star.rockisland.com.crt.pem ssl_key = </usr/local/etc/ssl/star.rockisland.com.key.pem userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf driver = ldap } verbose_proctitle = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = lda_mailbox_autocreate = no lda_mailbox_autosubscribe = yes log_path = mail_plugins = quota sieve postmaster_address = postmaster(a)rockisland.com sendmail_path = /usr/sbin/sendmail } Mike Greene Rock Island Technology Solutions, Inc. San Juan Islands, WA. 360-378-5884 x201

2 1

[Dovecot] find virtual users
by Rafael Nathan 06 Aug '12

06 Aug '12

Hi, Can sendmail find virtual users in /etc/dovecot/passwd ? If yes, what are the necesary changes I have to make ? Urgent help needed. Thanks in advance. Regards, Rafael

3 2

[Dovecot] Just trying to make dovecot work.
by Peter Snow 06 Aug '12

06 Aug '12

Hi, I have to say that Dovecot is certainly the most challenging piece of software I've ever had the pleasure of setting up (due mainly to the reams of largely unhelpful documentation). After 36 almost non-stop hours reading and trying, I finally end up here. :-) I really would appreciate your help - and many thanks in advance! *************************************************************** /var/log/dovecot.info.log (showing unsuccessful login) *************************************************************** Aug 04 21:32:36 auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Aug 04 21:32:36 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Aug 04 21:32:36 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Aug 04 21:32:36 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Aug 04 21:32:36 auth: Debug: passwd-file /usr/local/etc/dovecot.passdb: Read 1 users Aug 04 21:32:36 auth: Debug: auth client connected (pid=24769) Aug 04 21:32:41 auth: Debug: client in: AUTH 1 PLAIN service=imap securedlip=::1 rip=::1 lport=143 rport=52551 resp=AHBldGVyAGZ1YXNpbjU0MTRz Aug 04 21:32:41 auth: Debug: passwd-file(peter,::1): lookup: user=peter file=/usr/local/etc/dovecot.passdb Aug 04 21:32:41 auth: Debug: client out: OK 1 user=peter Aug 04 21:32:41 auth: Debug: master in: REQUEST 1417805825 24769 1 44a3aec60ec6eaec6eff0efb99971eee Aug 04 21:32:41 auth: Debug: master out: USER 1417805825 peter Aug 04 21:32:41 imap-login: Info: Login: user=<peter>, method=PLAIN, rip=::1, lip=::1, mpid=24772, secured *************************************************************** END *************************************************************** *************************************************************** /var/log/dovecot.log (showing unsuccessful login) *************************************************************** Aug 04 21:32:41 IMAP(peter): Error: user peter: Couldn't drop privileges: User is missing UID (see mail_uid setting) Aug 04 21:32:41 IMAP(peter): Error: Internal error occurred. Refer to server log for more information. *************************************************************** END *************************************************************** *************************************************************** dovecot -n *************************************************************** # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.2.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) ext4 auth_debug = yes auth_debug_passwords = yes auth_verbose = yes disable_plaintext_auth = no first_valid_uid = 1000 info_log_path = /var/log/dovecot.info.log last_valid_uid = 5000 log_path = /var/log/dovecot.log login_trusted_networks = 127.0.0.1 mail_debug = yes mail_location = maildir:/var/mail/%u/Maildir mail_log_prefix = "%Us(%u): " passdb { args = /usr/local/etc/dovecot.passdb driver = passwd-file } protocols = imap ssl = no verbose_proctitle = yes *************************************************************** END *************************************************************** *************************************************************** /usr/local/etc/dovecot.passdb *************************************************************** peter:{CRYPT}BrtgyyOEX33w6:1000:500:Peter Snow:/var/mail/peter:: *************************************************************** END *************************************************************** *************************************************************** cat /etc/passwd | grep peter *************************************************************** peter:x:1000:500::/home/peter:/sbin/nologin *************************************************************** END *************************************************************** Notes: 'peter' does not yet have a system password, since I'm testing this for users which will only be virtual users. I made the password for 'peter' in the dovecot.passdb using "doveadm pw -s crypt" although once I've got it working I'd like to change the encryption to something as strong as possible - any suggestions please? Hope you can help and many thanks. Kind regards, Peter

4 6

Re: [Dovecot] getting rid of old spam from +spam Maildir ?
by Joseph Tam 06 Aug '12

06 Aug '12

Charles Marcus <CMarcus(a)Media-Brokers.com> writes: > On 2012-08-03 6:33 PM, Voytek Eymont <voytek(a)sbt.net.au> wrote: >> don't know, looking this morning it shows like below, the 00:05:05 is >> probably last time I did 'ls'? I was doing 'ls' or web mail refresh, to >> see what gets removed from 'spam' box, before and after each attempt to >> expunge : >> >> date.saved: 2012-08-03 00:05:05 > > The 'date.saved:' is the date/time that the message was moved into that > folder. Perhaps this related thread starting at http://dovecot.org/list/dovecot/2012-July/067199.html and ending with the patch by Timo http://dovecot.org/list/dovecot/2012-July/067423.html may be of interest to the OP. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] getting rid of old spam from +spam Maildir ?
by Voytek Eymont 06 Aug '12

06 Aug '12

I'm trying to setup per user '+spam' delivery from amavis tags, so that each user gets any mails tagged as spam to 'spam' Maildir via +spam Dovecot lmtp delivery. after say 7 days I want to delete all spams older than 7 days, if I simply delete mail files from the file system, is that a 'bad thing' ? what is a proper way to do that, and scripts ? for removing/archiving old uncollected emails in main INBOX I use archivemail from sf, but, don't think I can do subfoldrs with archivemail any pointers (and scripts) welcomed, thanks -- Voytek

6 19

[Dovecot] ot: mysql auth worker failure ?
by Voytek Eymont 05 Aug '12

05 Aug '12

looking through logs I noticed this today: grep mysql /var/log/maillog | grep fail Aug 3 17:35:25 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:35:57 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:36:02 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:36:23 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:36:40 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:36:50 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:40:04 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:41:04 dovecot: auth-worker(29721): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:41:19 dovecot: auth-worker(29721): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:41:38 dovecot: auth-worker(29721): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist looking at mysqld.log, all i see is: 120721 17:58:44 InnoDB: Shutdown completed; log sequence number 0 76814 120721 17:58:44 [Note] /usr/libexec/mysqld: Shutdown complete 120721 17:58:44 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 120721 17:59:53 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 120721 17:59:54 InnoDB: Initializing buffer pool, size = 8.0M 120721 17:59:54 InnoDB: Completed initialization of buffer pool 120721 17:59:54 InnoDB: Started; log sequence number 0 76814 120721 17:59:54 [Note] Event Scheduler: Loaded 0 events 120721 17:59:54 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.1.61' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution no failure were noticed or reported, except for log items any thoughts ? I might have been importing (phpmyadmin) some 3 or 4 databases around that time, surely that wouldn't cause such issue ? -- Voytek Eymont

4 6

[Dovecot] disable auth-worker logging
by Gmail-teopro 04 Aug '12

04 Aug '12

Hello all, Can someone please give me a hint about how can I disable such messages to be inserted into log file(maillog this case as syslog_facility = mail)? >> dovecot: auth-worker(13377): mysql(localhost): Connected to database postfix All the '_debug' and '_verbose' statements bear the 'no' value. Thank you. -- Best regards, Gmail-teopro mailto:teopro@gmail.com

2 1

[Dovecot] authenticate plain and utf-8 with special chars
by Matthias Lay 04 Aug '12

04 Aug '12

Hi, I experienced some problems with authenticate. seems like the mail clients like thunderbird send their base64 string in ISO- encoding, which doesnt work on my dovecot setup if there are some Umlauts I am not able to login as "ömer" for example If I authenticate from telnet with an base64 encoded utf-8 string like 'echo -en "\0ömer\0Start12" |base64' everything works fine -dovecot 2.1.7 -userdb is an openldap which queries an windows AD so results are in utf8, I think. any clues at which point to fix this are welcome ;)

2 1

[Dovecot] zlib plugin maildir broken ?/ Cached message size smaller than expected
by Robert Schetterer 03 Aug '12

03 Aug '12

Hi Timo, by having errors like Cached message size smaller than expected and Maildir filename has wrong S value and Corrupted index cache file in dove 2.1.8 i can reproduce the problem with tb 14 with 2 nat machines connected to the same server the problem relates with create new folder then copy some uncompressed and compressed mail to it, the i.e open it by other client sometime this happens at once , sometime after a few copy actions however thunderbird ,then errors above apear, sometimes no mail is shown, sometimes only uncompressed or only compressed so funktion read both formats gets lost somehow any idea, you need a better debug ? -- Best Regards MfG Robert Schetterer

2 13

[Dovecot] Overriding inbox= in userdb extra fields
by Bret Martin 03 Aug '12

03 Aug '12

Hello, I'm trying to set up an alternate user with a different inbox using passwd-file and userdb extra fields and the extra field settings don't seem to be taking effect. I've used auth_debug and mail_debug and I'm unclear how I can further troubleshoot this. Is it possible to have inbox=yes in one namespace globally and then override this for one user by setting inbox=no for that namespace and then inbox=yes for another? My doveconf -n is below. I would like to have inbox=yes for the inbox namespace, inbox=no for the virtual namespace, and then be able to invert these for selected users using userdb extra fields. My attempt at doing this so far looks like bam-ios:[REDACTED]:500:500::/home/bam::user=bam namespace/inbox/inbox=no namespace/virtual/inbox=yes Changing the user with user= seems to work fine, but the inbox= changes don't. Here is some relevant log data. Aug 2 11:37:29 new-miranda dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Aug 2 11:37:29 new-miranda dovecot: auth: Debug: passwd-file /etc/dovecot/users: Read 1 users in 0 secs Aug 2 11:37:29 new-miranda dovecot: auth: Debug: auth client connected (pid=14967) Aug 2 11:37:29 new-miranda dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011session=Rgx2MErG4wBAd51y#011lip=216.93.241.245#011rip=64.119.157.114#011lport=993#011rport=38115#011resp=<hidden> Aug 2 11:37:29 new-miranda dovecot: auth: Debug: passwd-file(bam-ios,64.119.157.114,<Rgx2MErG4wBAd51y>): lookup: user=bam-ios file=/etc/dovecot/users Aug 2 11:37:29 new-miranda dovecot: auth: Debug: auth(bam-ios,64.119.157.114,<Rgx2MErG4wBAd51y>): username changed bam-ios -> bam Aug 2 11:37:29 new-miranda dovecot: auth: Debug: client out: OK#0111#011user=bam#011namespace/inbox/inbox=no#011namespace/virtual/inbox=yes Aug 2 11:37:29 new-miranda dovecot: auth: Debug: master in: REQUEST#[REDACTED] Aug 2 11:37:29 new-miranda dovecot: auth: Debug: passwd-file(bam,64.119.157.114,<Rgx2MErG4wBAd51y>): lookup: user=bam file=/etc/dovecot/users Aug 2 11:37:29 new-miranda dovecot: auth: passwd-file(bam,64.119.157.114,<Rgx2MErG4wBAd51y>): unknown user Aug 2 11:37:29 new-miranda dovecot: auth: Debug: passwd(bam,64.119.157.114,<Rgx2MErG4wBAd51y>): lookup Aug 2 11:37:29 new-miranda dovecot: auth: Debug: master out: USER#0111425670145#011bam#011system_groups_user=bam#011uid=500#011gid=500#011home=/home/bam Aug 2 11:37:29 new-miranda dovecot: imap-login: Login: user=<bam>, method=PLAIN, rip=64.119.157.114, lip=216.93.241.245, mpid=14970, TLS, session=<Rgx2MErG4wBAd51y> Aug 2 11:37:29 new-miranda dovecot: imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Aug 2 11:37:29 new-miranda dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_virtual_plugin.so Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Effective uid=500, gid=500, home=/home/bam Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/srv/mail/bam/mdbox Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: fs: root=/srv/mail/bam/mdbox, index=, control=, inbox=, alt= Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Namespace : Using permissions from /srv/mail/bam/mdbox: mode=0700 gid=-1 Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Namespace virtual: type=private, prefix=virtual/, sep=/, inbox=no, hidden=yes, list=no, subscriptions=yes location=virtual:/srv/mail/bam/virtual Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: fs: root=/srv/mail/bam/virtual, index=, control=, inbox=, alt= Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Namespace mdbox: type=private, prefix=mdbox/, sep=/, inbox=no, hidden=yes, list=no, subscriptions=yes location=mdbox:/srv/mail/bam/mdbox Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: fs: root=/srv/mail/bam/mdbox, index=, control=, inbox=, alt= I also tried not having inbox=yes anywhere in the global configurations, but then I get Aug 2 11:52:22 new-miranda dovecot: imap(bam): Error: user bam: Initialization failed: namespace configuration error: inbox=yes namespace missing I'm having great luck with the virtual plugin, but I only want to use it for the inbox on some clients. Any ideas on why my inbox=yes/no overrides aren't taking effect? Thanks, --Bret # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 ext4 mail_location = mdbox:/srv/mail/%u/mdbox mail_plugins = " virtual" namespace inbox { inbox = no location = prefix = } namespace mdbox { hidden = yes list = no location = prefix = mdbox/ separator = / } namespace virtual { hidden = yes inbox = yes list = no location = virtual:/srv/mail/%u/virtual prefix = virtual/ separator = / } passdb { args = scheme=SSHA512 username_format=%u /etc/dovecot/users driver = passwd-file } passdb { driver = pam } protocols = " imap" service imap-login { inet_listener imap { port = 0 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } userdb { driver = passwd }

2 2

[Dovecot] v2.1.9 released
by Timo Sirainen 03 Aug '12

03 Aug '12

http://dovecot.org/releases/2.1/dovecot-2.1.9.tar.gz http://dovecot.org/releases/2.1/dovecot-2.1.9.tar.gz.sig I've again mostly finished reading and answering most of the mails in Dovecot mailing list. There are a couple annoyingly difficult / time consuming bugreport mails that I haven't replied to yet, but if anyone thinks I should have replied to something already feel free to resend the mail. For the new Redis/memcached dict stuff see http://master.wiki2.dovecot.org/AuthDatabase/Dict and http://master.wiki2.dovecot.org/Quota/Dict I'm thinking about removing the new quota_ignore_save_errors=yes setting in v2.2 and just forcing it enabled always. Thoughts? (I didn't want to change v2.1 behavior by doing this.) The most important changes since v2.1.8: * mail-log plugin: Log mailbox names with UTF-8 everywhere (instead of mUTF-7 in some places and UTF-8 in other places) * director: Changed director_username_hash setting's default from %u to %Lu (= lowercase usernames). This doesn't break any existing installations, but might fix some of them. + doveadm: Added "auth cache flush [<username>]" command. + Implemented dict passdb/userdb + Implemented Redis and memcached dict backends, which can be used as auth backends. Redis can also be used as dict-quota backend. + Added plugin { quota_ignore_save_errors=yes } setting to allow saving a mail when quota lookup fails with temporary failure. - Full text search indexing might have failed for some messages, always causing indexer-worker process to run out of memory. - fts-lucene: Fixed handling SEARCH HEADER FROM/TO/SUBJECT/CC/BCC when the header wasn't lowercased. - fts-squat: Fixed crash when searching a virtual mailbox. - pop3: Fixed assert crash when doing UIDL on empty mailbox on some setups. - auth: GSSAPI RFC compliancy and error handling fixes. - Various fixes related to handling shared namespaces

3 4

[Dovecot] Antispam only when LMTP delivers some specific messages
by Sandro Tosi 03 Aug '12

03 Aug '12

Hello, we're setting up a weird platform where every incoming email is passed from the MTA directly to a tool that then uses dovecot LMTP to deliver the message into the user mailbox. We are legally *not* allowed to run antispam on all the incoming messages, but only on some of them, as they are recognized by the aforementioned tool; but given that tool directly uses LMTP to delivers the mail we need to find a way to parse the messages passing thru LMTP and run spamassassin only on those matching some regex on subject and mail body. Is is possible to do that with some dovecot LMTP feature? i've read a lot of documentation about how to possibly implement it and it *seems* there would be a way using pigeonhole sieve and extprograms - what do you think? The idea I have in mind is something like: 1. identify the mails we want to scan with spamassassin (using regex or whatever else to precisely pin-point them) 2. run SA on those 3. in case it's spam, rewrite the subject (or similar) Do you think it's something doable with dovecot? Thanks in advance, -- Sandro Tosi Product Engineer Shared Hosting Products R&D | Dada.pro eml sandro.tosi(a)register.it

3 3

[Dovecot] dovecot-lda setting quota rules
by Lazy 03 Aug '12

03 Aug '12

Hi, in my setup dovecot-lda reads user and home from environment, and dosn't perform userdb lookup Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Effective uid=300, gid=300, home=/vmail/la/lazytest_test Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Quota root: name=User quota backend=maildir args= Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Quota warning: bytes=0 (95%) messages=0 reverse=no command=quota-warning 95 lazytest_test Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Quota warning: bytes=0 (80%) messages=0 reverse=no command=quota-warning 80 lazytest_test Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes l ocation=maildir:~/Maildir:INDEX=/var/dovecot_indexes/vmail/la/lazytest_test Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: maildir++: root=/vmail/la/lazytest_test/Maildir, index=/var/dovecot_indexes/vmail/la/lazytest_tes t, control=, inbox=/vmail/la/lazytest_test/Maildir, alt= Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: userdb lookup skipped, username taken from USER environment Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Quota root: name=User quota backend=maildir args= I wan't it to stay that way. The problem is that it dosn't update the quota rules in Maildir when quota is changed in userdb. I have the rules avaiable in qmail-lda's environment, but I need an idea on how to feed the quota rule string to quota plugin without doing userdb lookup. What whould be the best way to do this, maybe in plugins/quota/quota.c:quota_root_add_rules() ? Regards, Michal Grzedzicki

2 4

[Dovecot] managesieve segfault with gold linker
by Eray Aslan 03 Aug '12

03 Aug '12

dovecot-2.1.8 sieve-0.3.1 binutils-2.22 When dovecot and sieve is linked with ld.gold I get a segfault in checkscript command: $ telnet localhost 4190 [some output] authenticate "PLAIN" "<base64_username_password>" [some more output] checkscript "foobarscript" connection closed Logs: 2012-07-12T19:30:23.624158+00:00 bob dovecot: master: Dovecot v2.1.8 starting up 2012-07-12T19:31:22.548913+00:00 bob dovecot: managesieve-login: Login: user=<username>, method=PLAIN, rip=192.168.122.1, lip=192.168.122.64, mpid=12169, session=<YGo2AqfEcwDAqHoB> 2012-07-12T19:31:34.636747+00:00 bob dovecot: managesieve(username): Fatal: master: service(managesieve): child 12169 killed with signal 11 (core dumped) make check also fails (thank you for that): [...] Test case: ./tests/execute/errors.svtest: 1: Test 'Action conflicts: reject <-> fileinto' SUCCEEDED 2: Test 'Action conflicts: reject <-> keep' SUCCEEDED 3: Test 'Action conflicts: reject <-> redirect' SUCCEEDED 4: Test 'Action limit' SUCCEEDED 5: Test 'Redirect limit' SUCCEEDED /tmp/work/dovecot-2.1-pigeonhole-0.3.1/src/testsuite/.libs/lt-testsuite: symbol lookup error: /tmp/work/dovecot-2.1-pigeonhole-0.3.1/src/lib-sieve/.libs/libdovecot-sieve.so.0: undefined symbol: mail_deliver_get_log_var_expand_table make: *** [tests/execute/errors.svtest] Error 127 Backtrace is attached. -- Eray Aslan <eras(a)gentoo.org>

2 4

[Dovecot] LZMA2 (xz) support for Dovecot?
by Brad Smith 02 Aug '12

02 Aug '12

Timo, Thoughts on adding LZMA2 (xz) support via liblzma to Dovecot? -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] imap(xxxxxxxx): Error: opendir(/user/xxxxxxxx/.imap) failed: No such file or directory
by Frank Bonnet 02 Aug '12

02 Aug '12

hello I see this message in the dovecot error log every time a user connect to IMAP service. imap(xxxxxxxx): Error: opendir(/user/xxxxxxxx/.imap) failed: No such file or directory In the server's config I've this mail_location = mbox:%h/:INBOX=/var/mail/%u:INDEX=/var/spool/dovecot/index/%u As we can see INDEX files are not living in user's home directories but in /var/spool/dovecot/index/%u so why this error message ? BTW : users access normally to their IMAP folders , I'm just curious about this message which is not marked as warning but error Thank you

4 14

[Dovecot] Problem with preserving MIME format with Dovecot IMAP and MS Outlook client
by Peter Grimmond 01 Aug '12

01 Aug '12

Hello all, Apologies for the repost, but I am really struggling to solve this problem... I have installed Dovecot 2.0.19 on Ubuntu 12.04 LTS. I have set up a very basic IMAP configuration. I have two different laptops running MS Outlook (one MacOS, one Windows 7) and I have configured both to connect to the Dovecot service. My problem is, emails in MIME format that I synchronise from one MS Outlook client are not being correctly decoded as MIME messages on the other client. Instead, the message is rendered in plaintext, starting with the lines: This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3426360453_22814Content-type: multipart/alternative; boundary="B_3426360453_4099" --B_3426360453_4099Content-type: text/plain; charset="ISO-8859-1"Content-transfer-encoding: quoted-printable Can anyone help me understand why this might be happening? The output from dovecot -n is: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-26-generic-pae i686 Ubuntu 12.04 LTS auth_debug = yes auth_verbose = yes disable_plaintext_auth = no mail_location = maildir:~/Maildir passdb { driver = pam } protocols = " imap" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } Thanks! PG ___ Peter Grimmond

2 1

[Dovecot] Problem with preserving MIME format with Dovecot IMAP and Outlook
by Peter Grimmond 01 Aug '12

01 Aug '12

1 0

[Dovecot] can't recieve emails to inbox
by Rafael Nathan 01 Aug '12

01 Aug '12

Hi, I am unable to send emails to virtual users I created. Here is my output for dovecot -n # 1.0.7: /etc/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log ssl_disable: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: maildir:~/Maildir mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: verbose: yes passdb: driver: passwd-file args: /etc/dovecot/passwd passdb: driver: pam userdb: driver: passwd userdb: driver: static args: uid=vmail gid=vmail home=/home/vmail/%u == Contents of my passwd file located at /etc/dovecot/passwd user1(a)mydomain.com user2(a)mydomain.com I sent an email to user1(a)mydomain.com from gmail.com but can view it anywhere. Please suggest. Where am I going wrong?

2 1

[Dovecot] Erroneous operation not permitted when deleting mailbox with mdbox
by Nikolai Schupbach 01 Aug '12

01 Aug '12

I'm seeing the following error in our logs when removing mailboxes (we are using mdbox and dovecot 2.1.8): Aug 1 20:03:36 msgsrv dovecot: imap(test(a)test.com): Error: stat(/mailstore/domains/test.com/test/mdbox/mailboxes/Spam) failed: Operation not permitted Aug 1 20:03:36 msgsrv dovecot: imap(test(a)test.com): Mailbox deleted: Spam When I run truss against the process it appears the error relates to attempted unlink of a directory, not a stat of it, as reported by the log. However the mailbox does appear to be deleted fine, so it appears to be an erroneous error. Here is the truss output from the "3 DELETE INBOX.Spam" IMAP command: gettimeofday({1343808204.962165 },0x0) = 0 (0x0) gettimeofday({1343808204.962351 },0x0) = 0 (0x0) kevent(9,0x0,0,{0xb,EVFILT_READ,0x0,0,0x15,0x21c17a40},6,{1786.679649000 }) = 1 (0x1) gettimeofday({1343808216.031493 },0x0) = 0 (0x0) gettimeofday({1343808216.031676 },0x0) = 0 (0x0) read(11,"3 DELETE INBOX.Spam\r\n",8179) = 21 (0x15) getpid() = 6293 (0x1895) __sysctl(0x7fffffffd850,0x4,0x0,0x0,0x21c8f000,0x2a) = 0 (0x0) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails",{ mode=drwx------ ,inode=28761,size=3,blksize=131072 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails",{ mode=drwx------ ,inode=28761,size=3,blksize=131072 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam",{ mode=drwx------ ,inode=28760,size=3,blksize=131072 }) = 0 (0x0) open("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",O_RDWR,037777753160) = 10 (0xa) fstat(10,{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) pread(0xa,0x21c30000,0x90,0x0,0x1000,0x0) = 144 (0x90) open("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index",O_RDWR,037777731760) ERR#2 'No such file or directory' open("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log.2",O_RDWR,037777731520) ERR#2 'No such file or directory' fstat(10,{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) unlink("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam") ERR#1 'Operation not permitted' stat("/usr/share/nls/C/libc.cat",0x7fffffffd0a0) ERR#2 'No such file or directory' stat("/usr/share/nls/libc/C",0x7fffffffd0a0) ERR#2 'No such file or directory' stat("/usr/local/share/nls/C/libc.cat",0x7fffffffd0a0) ERR#2 'No such file or directory' stat("/usr/local/share/nls/libc/C",0x7fffffffd0a0) ERR#2 'No such file or directory' write(2,"\^A\b6293 prefix=imap(test@test."...,36) = 36 (0x24) write(2,"\^A\^D6293 stat(/mailstore/domai"...,99) = 99 (0x63) access("/etc/localtime",4) = 0 (0x0) open("/etc/localtime",O_RDONLY,04160026530) = 12 (0xc) fstat(12,{ mode=-r--r--r-- ,inode=16454,size=2434,blksize=4096 }) = 0 (0x0) read(12,"TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0"...,41448) = 2434 (0x982) close(12) = 0 (0x0) issetugid(0x20ee7fd1,0x21e72000,0x0,0xa7,0x4e,0xc) = 1 (0x1) open("/usr/share/zoneinfo/posixrules",O_RDONLY,056) = 12 (0xc) fstat(12,{ mode=-r--r--r-- ,inode=545,size=3519,blksize=4096 }) = 0 (0x0) read(12,"TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0"...,41448) = 3519 (0xdbf) close(12) = 0 (0x0) madvise(0x21eba000,0xb000,0x5,0x2b9,0x17,0x1) = 0 (0x0) madvise(0x21e72000,0x5000,0x5,0x271,0x17,0x1) = 0 (0x0) madvise(0x21e63000,0xc000,0x5,0x262,0x7fffffffcbf0,0x7fffffffcbf0) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) gettimeofday({1343808216.048607 },0x0) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log.2",0x7fffffffd600) ERR#2 'No such file or directory' setitimer(0,{0.000000, 180.000000 },{0.000000, 0.000000 }) = 0 (0x0) fcntl(10,F_SETLKW,0x7fffffffd520) = 0 (0x0) setitimer(0,{0.000000, 0.000000 },{0.000000, 180.000000 }) = 0 (0x0) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) pwrite(0xa,0x21c09000,0xc,0x90,0x10ab6b8,0x2) = 12 (0xc) pwrite(0xa,0x7fffffffd69c,0x4,0x90,0x10ab6b8,0x2) = 4 (0x4) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) fcntl(10,F_SETLK,0x7fffffffd5e0) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) setitimer(0,{0.000000, 180.000000 },{0.000000, 0.000000 }) = 0 (0x0) fcntl(10,F_SETLKW,0x7fffffffd1f0) = 0 (0x0) setitimer(0,{0.000000, 0.000000 },{0.000000, 180.000000 }) = 0 (0x0) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) pwrite(0xa,0x21c09400,0x1c,0x9c,0xffff800021c0bea4,0x7fffffffa9f0) = 28 (0x1c) pwrite(0xa,0x7fffffffd57c,0x4,0x9c,0xffff800021c0bea4,0x7fffffffa9f0) = 4 (0x4) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) fcntl(10,F_SETLK,0x7fffffffd610) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=184,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=184,blksize=4096 }) = 0 (0x0) rename("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails","/mailstore/domains/test.com/test/mdbox/..DOVECOT-TrasH") = 0 (0x0) open(".",O_RDONLY,00) = 12 (0xc) open("/mailstore/domains/test.com/test/mdbox/..DOVECOT-TrasH",O_NOFOLLOW,00) = 13 (0xd) fchdir(0xd,0x100,0x0,0x7b30,0x101010101010101,0x8080808080808080) = 0 (0x0) stat(".",{ mode=drwx------ ,inode=28761,size=3,blksize=131072 }) = 0 (0x0) open(".",O_NONBLOCK|0x20000,00) = 14 (0xe) fstat(14,{ mode=drwx------ ,inode=28761,size=3,blksize=131072 }) = 0 (0x0) fcntl(14,F_SETFD,FD_CLOEXEC) = 0 (0x0) fstatfs(0xe,0x7fffffffd3a0,0x21c00400,0x29,0x61ff20,0x0) = 0 (0x0) getdirentries(0xe,0x21c31000,0x1000,0x21c284e8,0x61ff20,0x0) = 52 (0x34) unlink("dovecot.index.log") = 0 (0x0) getdirentries(0xe,0x21c31000,0x1000,0x21c284e8,0x61ff20,0x0) = 0 (0x0) close(13) = 0 (0x0) lseek(14,0x0,SEEK_SET) = 0 (0x0) close(14) = 0 (0x0) fchdir(0xc,0x0,0x21c07400,0x28,0x61ff20,0x0) = 0 (0x0) close(12) = 0 (0x0) rmdir(0x21c18470,0x0,0x21c07400,0x28,0x61ff20,0x0) = 0 (0x0) rmdir(0x21c184f0,0x4,0x21c18000,0x7af8,0xffffffffffdd6669,0x21c8c298) = 0 (0x0) open("/mailstore/domains/test.com/test/mdbox/dovecot.mailbox.log",O_RDWR|O_APPEND,0125337603) = 12 (0xc) write(12,"\^A\0\0\0\M^L\M-M%\^E\M^F\M-b\^X"...,24) = 24 (0x18) fstat(12,{ mode=-rw------- ,inode=28751,size=144,blksize=4096 }) = 0 (0x0) rmdir(0x21c186d0,0x21e41eb8,0x21c186d0,0x7918,0xffffffffffdd6849,0x21c8c298) ERR#2 'No such file or directory' write(12,"\^B\0\0\0\M-Xb\M^JRY\M-I{x\M--C"...,24) = 24 (0x18) fstat(12,{ mode=-rw------- ,inode=28751,size=168,blksize=4096 }) = 0 (0x0) write(2,"\^A\^B6293 Mailbox deleted: Spam"...,29) = 29 (0x1d) gettimeofday({1343808216.058749 },0x0) = 0 (0x0) madvise(0x21e65000,0x1000,0x5,0x264,0x7fffffffcfa0,0xffffffff) = 0 (0x0) madvise(0x21e63000,0x1000,0x5,0x262,0x7fffffffcfa0,0xffffffff) = 0 (0x0) madvise(0x21e41000,0x2000,0x5,0x240,0x7fffffffcfa0,0xffffffff) = 0 (0x0) madvise(0x21d8d000,0x4000,0x5,0x18c,0x7fffffffcfa0,0xffffffff) = 0 (0x0) madvise(0x21c91000,0x2000,0x5,0x90,0x7fffffffcfa0,0xffffffff) = 0 (0x0) gettimeofday({1343808216.059531 },0x0) = 0 (0x0) getpid() = 6293 (0x1895) __sysctl(0x7fffffffd830,0x4,0x0,0x0,0x21c8f000,0x23) = 0 (0x0) write(11,"3 OK Delete completed.\r\n",24) = 24 (0x18) gettimeofday({1343808216.060105 },0x0) = 0 (0x0) Regard, Nikolai.

2 1