- dovecot - dovecot.org

[Dovecot] Desperately need help ! a default dovecot.conf and/or Ubuntu 11.10 postfix/dovecot server configuration issue!
by D Chen 03 Mar '12

03 Mar '12

When ungraded from Ubuntu 11.04 to 11.10, dovecot can't start successfully with lots of errors i.e. "dovecot: doveconf: Warning: ... 'imaps' protocol is no longer necessary, remove it"... At any rate, I want to setup a postfix(MTA)/dovecot(MDA) servers on Ubuntu 11.10, by following the Postfix installation and configuration instruction in Ubuntu Serverguide, in "1.4 Configuring SASL" section on page 190, after run "sudo apt-get install dovecot-common", it requires to edit the section of "auth default" and the "socket listen" option...,in the /etc/dovecot/dovecot.conf file, BUT my /etc/dovecot/dovecot.conf (only about 4k byes) CAN'T find the "auth default" "socket listen" ! I also checked into the /usr/share/doc/dovecot-common/dovecot/example-config, there is a dovecot.conf, it's also about 4k size, and there is no such "auth default" or "socket listen" words can be found ! where is the default dovecot.conf file I can get a copy ? BTW, there is the dovecot.conf.ucf file (what is this for?) which's about 50k and has the "auth default" and "socket listen" words there ! what is supposed the size for the /etc/dovecot/dovecot.conf ? i'm confused! Thx.

3 2

[Dovecot] fts size
by Jan-Frode Myklebust 02 Mar '12

02 Mar '12

Does anybody have any numbers for how large storage one will need for the fts indexing server? I see the wiki says 30% of mailbox size for Squat (partial=4 full=4). Is it similar for lucene/solr? Do I understand correctly if I think http://wiki2.dovecot.org/Plugins/FTS/Lucene will create an index for each user in his home directory? Will this be accounted for in the users' quota? -jf

3 5

[Dovecot] Thanks, was Re: need simpler instructions for user authentication
by David Benfell 02 Mar '12

02 Mar '12

Thanks to everyone who responded to my request. And I apologize that this message isn't properly threaded. I'm in trouble whenever I have to send mail from my gmail account because I automatically pull it down into the same place from which I send my regular mail (from benfell(a)parts-unknown.org ) and I haven't configured that to deal with the gmail account. That makes it difficult to reply properly to mail on this list which I have subscribed to with the gmail account so that I'd actually receive it even when I'm having problems with my main mail system. Timo Sirainen <tss(a)iki.fi> responded that I needed a userdb and offered that I should probably add the following to dovecot.conf : userdb { driver = passwd } As near as I can tell--and it's been over a day now--that solved the problem. Thanks!

1 0

[Dovecot] 2.1.1: subscriptions: Removing invalid entry
by Ralf Hildebrandt 01 Mar '12

01 Mar '12

Admittedly, it's not a valid folder name and dovecot is right in removing it: Feb 28 17:50:05 postamt dovecot: imap(kbaessle): Warning: Subscriptions file /home/k/b/kbaessle/Maildir/subscriptions: Removing invalid entry: Entw�rfe ...but when looking at the subscription file AFTER the removal, that file contained an empty line. I don't think that's correct. -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

3 2

[Dovecot] need simpler directions on user authentication
by David Benfell 01 Mar '12

01 Mar '12

Hi all, My situation is this: I have postfix running on a Linode under Arch Linux. A recent upgrade to dovecot broke the configuration. Now I get "Couldn't drop privileges: User is missing UID (see mail_uid setting)." I do not want virtual users. I do not particularly want SQL or LDAP. I do have multiple domains. I do use Maildir. I already have SSL certificates for the server which I did manage to get dovecot to quit complaining about. The documentation is driving me nuts. It keeps telling me about stuff I think I don't need. And I can't tell what I actually *do* need. All I want is for system users, including myself, to be able to get their mail. How do I do this? Thank you! David Benfell dbenfell(a)gmail.com

2 1

[Dovecot] need simpler instructions for user authentication
by David Benfell 01 Mar '12

01 Mar '12

Hi all, My situation is this: I have postfix running on a Linode under Arch Linux. A recent upgrade to dovecot broke the configuration. Now I get "Couldn't drop privileges: User is missing UID (see mail_uid setting)." I do not want virtual users. I do not particularly want SQL or LDAP. I do have multiple domains. I do use Maildir. I already have SSL certificates for the server which I did manage to get dovecot to quit complaining about. The documentation is driving me nuts. It keeps telling me about stuff I think I don't need. And I can't tell what I actually *do* need. All I want is for system users, including myself, to be able to get their mail. How do I do this? Thank you! David Benfell dbenfell(a)gmail.com

2 2

[Dovecot] Permission problems
by David Renstrom 01 Mar '12

01 Mar '12

Hi, I've set up a Postfix and Dovecot (only IMAP) combination using MySQL and Postfixadmin on Fedora. Almost everything works correctly now. The only thing bugging me right now is that I always have to change the access privileges of the directories in /var/run/dovecot/ manually to 777 to make it work. As you understand, I'm not particularly happy about this as it doesn't feel secure at all. And I also have to do this every time I reboot since Dovecot resets the old access priviliges (600). As you see I've got a vmail user who belongs to the mail group. Almost all directories under /var/run/dovecot belong to user root and group root. They all have the permissions rw--------. Below is some output from the log file dovecot.log: Mar 01 03:31:17 auth: Fatal: net_connect_unix(auth-worker) in directory /run/dovecot failed: Permission denied (euid=101(vmail) egid=12(mail) missing +r perm: /run/dovecot/auth-worker, dir owned by 0:97 mode=0755) Mar 01 03:31:17 master: Error: service(auth): command startup failed, throttling Mar 01 03:31:46 imap-login: Info: Disconnected (auth failed, 1 attempts): method=PLAIN, rip=94.254.99.6, lip=91.123.204.174 What is wrong here and how can I correct it? Thanks in advance! /David R.

3 2

[Dovecot] remove messages once downloaded
by Michael Sidoric 01 Mar '12

01 Mar '12

> > I need some help with the dovecot configuration. I want to remove > downloaded messages from Mail Server once the messages have been > successfully downloaded by pop3-clients, even when the clients have been > configured to save copy of messages in the Server. timo is quite correct -- consider imap instead, that's why the protocol exists.

5 5

[Dovecot] dovecot-2.1-pigeonhole-0.3.0 identifier redeclared: sieve_multiscript_run (patch)
by Piotr Tarnowski 29 Feb '12

29 Feb '12

Hi, I recently compiled dovecot-2.1.1 on Solaris 10 with Sun Studio, but when I want to compile Sieve for this version (dovecot-2.1-pigeonhole-0.3.0) I get an error: "sieve.c", line 578: identifier redeclared: sieve_multiscript_run and I see that declaration in sieve.h is different from definition in sieve.c, so compilation process fails with SunStudio cc compiler. I have done a quick hack to correct this, and then compiled successfully. Patch is included as attachment. Full output, OS and compiler versions below: libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I/home/soft/dovecot/dovecot-2.1.1 -I/home/soft/dovecot/dovecot-2.1.1/src/lib -I/home/soft/dovecot/dovecot-2.1.1/src/lib-dict -I/home/soft/dovecot/dovecot-2.1.1/src/lib-dns -I/home/soft/dovecot/dovecot-2.1.1/src/lib-mail -I/home/soft/dovecot/dovecot-2.1.1/src/lib-imap -I/home/soft/dovecot/dovecot-2.1.1/src/lib-fs -I/home/soft/dovecot/dovecot-2.1.1/src/lib-charset -I/home/soft/dovecot/dovecot-2.1.1/src/lib-index -I/home/soft/dovecot/dovecot-2.1.1/src/lib-storage -I/home/soft/dovecot/dovecot-2.1.1/src/lib-storage/index -I/home/soft/dovecot/dovecot-2.1.1/src/lib-storage/index/raw -I/home/soft/dovecot/dovecot-2.1.1/src/lib-lda -I/home/soft/dovecot/dovecot-2.1.1/src/lda -I/home/soft/dovecot/dovecot-2.1.1/src/lib-master -I/home/soft/dovecot/dovecot-2.1.1/src/lib-settings -DMODULEDIR=\"/usr/local/dovecot-2.1.1/lib/dovecot\" -I/usr/local/openldap/include -I/usr/local/ssl/include -I/usr/local/include -xO3 -xautopar -c sieve.c -KPIC -DPIC -o .libs/sieve.o "sieve-common.h", line 33: warning: useless declaration "/home/soft/dovecot/dovecot-2.1.1/src/lib-storage/mailbox-list.h", line 13: warning: useless declaration "sieve.c", line 578: identifier redeclared: sieve_multiscript_run current : function(pointer to struct sieve_multiscript {pointer to struct sieve_instance {..} svinst, pointer to struct sieve_result {..} result, pointer to const struct sieve_message_data {..} msgdata, pointer to const struct sieve_script_env {..} scriptenv, int status, _Bool active, _Bool keep, pointer to struct ostream {..} teststream}, pointer to struct sieve_binary {}, pointer to struct sieve_error_handler {pointer to struct pool {..} pool, int refcount, pointer to struct sieve_instance {..} svinst, pointer to struct sieve_error_handler {..} parent, unsigned int max_errors, unsigned int errors, unsigned int warnings, _Bool log_info, _Bool log_debug, pointer to function(..) returning void verror, pointer to function(..) returning void vwarning, pointer to function(..) returning void vinfo, pointer to function(..) returning void vdebug, pointer to function(..) returning void free}, unsigned int, _Bool) returning _Bool previous: function(pointer to struct sieve_multiscript {pointer to struct sieve_instance {..} svinst, pointer to struct sieve_result {..} result, pointer to const struct sieve_message_data {..} msgdata, pointer to const struct sieve_script_env {..} scriptenv, int status, _Bool active, _Bool keep, pointer to struct ostream {..} teststream}, pointer to struct sieve_binary {}, pointer to struct sieve_error_handler {pointer to struct pool {..} pool, int refcount, pointer to struct sieve_instance {..} svinst, pointer to struct sieve_error_handler {..} parent, unsigned int max_errors, unsigned int errors, unsigned int warnings, _Bool log_info, _Bool log_debug, pointer to function(..) returning void verror, pointer to function(..) returning void vwarning, pointer to function(..) returning void vinfo, pointer to function(..) returning void vdebug, pointer to function(..) returning void free}, enum sieve_runtime_flags {SIEVE_RUNTIME_FLAG_NOGLOBAL(1)}, _Bool) returning _Bool : "sieve.h", line 168 cc: acomp failed for sieve.c *** Error code 1 dmake: Fatal error: Command failed for target `sieve.lo' Current working directory /home/soft/dovecot/dovecot-2.1-pigeonhole-0.3.0/src/lib-sieve *** Error code 1 The following command caused the error: fail= failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='plugins'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && dmake $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ dmake "$target-am" || exit 1; \ fi; test -z "$fail" dmake: Fatal error: Command failed for target `all-recursive' % uname -a SunOS soft 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Fire-V890 Solaris % version Machine hardware: sun4u OS version: 5.10 Processor type: sparc Hardware: SUNW,Sun-Fire-V890 The following components are installed on your system: Sun Studio 12 update 1 Sun Studio 12 update 1 C Compiler Sun Studio 12 update 1 C++ Compiler Sun Studio 12 update 1 Tools.h++ 7.1 Sun Studio 12 update 1 C++ Standard 64-bit Class Library Sun Studio 12 update 1 Garbage Collector Sun Studio 12 update 1 Fortran 95 Sun Studio 12 update 1 Debugging Tools (including dbx) Sun Studio 12 update 1 IDE Sun Studio 12 update 1 Performance Analyzer (including collect, ...) Sun Studio 12 update 1 Performance Library Sun Studio 12 update 1 Scalapack Sun Studio 12 update 1 LockLint Sun Studio 12 update 1 Building Software (including dmake) Sun Studio 12 update 1 Documentation Set Sun Studio 12 update 1 /usr symbolic links and GNOME menu item version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/cc": Sun C 5.10 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/CC": Sun C++ 5.10 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/f90": Sun Fortran 95 8.4 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/dbx": Sun DBX Debugger 7.7 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/analyzer": Sun Analyzer 7.7 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/dmake": Sun Distributed Make 7.9 SunOS_sparc 2009/06/03 Regards -- [ Piotr Tarnowski piotr.tarnowski(a)us.edu.pl ] [ Unix Administrator at University of Silesia, Katowice, Poland ]

2 1

[Dovecot] What's behind the message ...
by Frank Elsner 29 Feb '12

29 Feb '12

... Warning: /media/Backup28a is no longer mounted. If this is intentional, remove it with doveadm mount Hello, the above message appeared when I restarted dovecot. What has dovecot to deal with my USB-Backup-Disk? Dovecot cares about filesystem without any relation to the mail system? Why this? What's bedind? Thanks in advance, Frank Elsner

2 2

[Dovecot] per-user limit?
by Peter Hessler 29 Feb '12

29 Feb '12

I am seeing a problem where users are limited to 6 imap logins total. One of my users has a bunch of phones and computers, and wants them all on at the same time. I'm looking through my configuration, and I cannot see a limit on how many times a single user can connect. He is connecting from different IPs. Any ideas? My logs show the following error when they attempt to auth for a 7th time: dovecot: imap-login: Disconnected (no auth attempts): rip=111.yy.zz.xx, lip=81.209.183.113, TLS $ dovecot -n # 2.0.16: /etc/dovecot/dovecot.conf # OS: OpenBSD 5.1 amd64 ffs auth_mechanisms = plain login base_dir = /var/dovecot/ listen = *, [::] mail_location = maildir:/usr/home/%u/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl passdb { driver = bsdauth } service auth { unix_listener /var/run/dovecot/auth-master { mode = 0600 } unix_listener /var/spool/postfix/private/auth { group = wheel mode = 0660 user = _postfix } user = root } service imap-login { process_limit = 128 process_min_avail = 6 service_count = 1 user = _dovecot } service pop3-login { process_limit = 64 process_min_avail = 6 service_count = 1 user = _dovecot } ssl_cert = </etc/ssl/dovecotcert.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = sieve postmaster_address = postmaster(a)theapt.org } -- We are all in the gutter, but some of us are looking at the stars. -- Oscar Wilde

4 4

[Dovecot] Post-login scripting - Trash cleanup
by list＠airstreamcomm.net 29 Feb '12

29 Feb '12

We are considering using the post-login scripting to clear trash older than 90 days from user accounts. has anyone done this, and if so did this cause logins to slow down too much waiting for the trash to purge? One idea was to execute the trash purge script once a day by tracking their logins and seeing that it has already ran that day. Another idea was to call the trash purge script in the background and continue without acknowledging that it has finished to keep logins speedy.

3 4

[Dovecot] Master user
by Emiliano Rago 29 Feb '12

29 Feb '12

Hi, I'd like to have a master user that can read the other users mailboxes. I have only one user who read and write the mail (i.e. I use the static userdb) and I use namespace for public and shared mailboxes. I can authenticate to the server but I am not able to list the mailboxes: > emiliano@dovecot:~$ telnet localhost imap > Trying 127.0.0.1... > Connected to localhost. > Escape character is '^]'. > * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. > 1 login user*master password > 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk] Logged in > 5 LIST "" * > * LIST (\Unmarked) "." "INBOX" > * LIST (\Noselect \HasNoChildren) "." "shared" > * LIST (\Noselect \HasChildren) "." "public" > 5 OK List completed. > * BYE Server shutting down. > Connection closed by foreign host. This is my conf: > # 2.0.9: /etc/dovecot/dovecot.conf > # OS: Linux 2.6.32-131.0.15.el6.x86_64 x86_64 Scientific Linux release 6.1 (Carbon) ext4 > auth_master_user_separator = * > disable_plaintext_auth = no > mail_location = maildir:/data/MAIL/MAILDIR/%u:INBOX=/data/MAIL/INBOX/%u:INDEX=/data/MAIL/METADATA/%u > mbox_write_locks = fcntl > namespace { > inbox = yes > location = > prefix = > separator = . > type = private > } > namespace { > list = yes > location = maildir:/data/MAIL/MAILDIR/%%u:INDEX=/data/MAIL/MAILDIR/shared/%u/%%u > prefix = shared.%%u. > separator = . > subscriptions = no > type = shared > } > namespace { > list = yes > location = maildir:/data/MAIL/SHARED > prefix = public. > separator = . > subscriptions = no > type = public > } > passdb { > driver = pam > } > passdb { > args = /etc/dovecot/master-shared > driver = passwd-file > master = yes > } > plugin { > acl = vfile:/etc/dovecot/global-acls:cache_secs=300 > acl_anyone = allow > acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes.db > } > protocols = imap > service auth { > unix_listener auth-userdb { > group = mailreader > mode = 0600 > user = mailreader > } > } > ssl = no > ssl_cert = </etc/pki/dovecot/certs/dovecot.pem > ssl_key = </etc/pki/dovecot/private/dovecot.pem > userdb { > args = uid=mailreader gid=mailreader home=/ allow_all_users=yes > driver = static > } > protocol lda { > mail_plugins = acl > } > protocol imap { > mail_plugins = acl imap_acl > } And in /etc/dovecot/master-shared: > master:{PLAIN}password What I did wrong? Thanks, Emiliano

2 6

[Dovecot] quota warning script not working after upgrade to 2.1.1
by Ralf Hildebrandt 28 Feb '12

28 Feb '12

With 2.0.18 I was using a quota warning script like this: plugin { ... # Quota quota = maildir quota_rule = INBOX.Trash:storage=+2048M quota_warning = storage=99%% quota-warning 99 %u quota_warning2 = storage=95%% quota-warning 95 %u quota_warning3 = storage=90%% quota-warning 90 %u quota_warning4 = storage=85%% quota-warning 85 %u } # der schickt die Quota warnmails service quota-warning { executable = script /usr/local/scripts/quota-warning2.1 user = root unix_listener quota-warning { mode = 0666 user = vmail group = users } } -rwxr-xr-x 1 root staff 3081 Feb 28 16:56 /usr/local/scripts/quota-warning2.1 But now I'm gettting this in my log: Feb 28 19:19:03 postamt quota-warning2(phxxxpsu): writing message failed Feb 28 19:19:03 postamt dovecot: quota-warning: Fatal: master: service(quota-warning): child 15065 returned error 1 Feb 28 19:40:13 postamt quota-warning2(lxxxve): writing message failed Feb 28 19:40:13 postamt dovecot: quota-warning: Fatal: master: service(quota-warning): child 3318 returned error 1 What is failing here? #!/bin/sh # # Should be run by the Local Delivery Agent # #set -x SCRIPT_NAME="quota-warning2" MAIL_TO=$2 MAIL_FROM="postmaster(a)charite.de" MAIL_QUOTA_PERCENT=$1 MAIL_SUBJECT="Ihre Mailbox ist zu "$1"% voll!" BIN_CAT="/bin/cat" BIN_DATE="/bin/date" BIN_HOSTNAME="/bin/hostname" BIN_LOGGER="/usr/bin/logger" BIN_MV="/bin/mv" BIN_STAT="/usr/bin/stat" #set -x # set misc values HOSTNAME="`${BIN_HOSTNAME}`" # set mail value MAIL_DATE="`${BIN_DATE} '+%a, %d %b %Y %T %z (%Z)'`" MAIL_MESSAGE_ID="`${BIN_DATE} '+%Y%m%d%H%M%S'`@${HOSTNAME}" #To: ${MAIL_TO} # write out message ${BIN_CAT} << EOF | /usr/local/dovecot-2.1/libexec/dovecot/dovecot-lda -d $MAIL_TO -o "plugin/quota=maildir::noenforcing" From: ${MAIL_FROM} Subject: ${MAIL_SUBJECT} Message-Id: <${MAIL_MESSAGE_ID}> Date: ${MAIL_DATE} MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit some warning in german EOF [ "$?" -gt 0 ] && \ ${BIN_LOGGER} -p mail.error -t "${SCRIPT_NAME}(${MAIL_TO})" \ "writing message failed" && exit 1 # log warning attempt ${BIN_LOGGER} -p mail.info -t "${SCRIPT_NAME}(${MAIL_TO}) ${MAIL_QUOTA_PERCENT}%" "delivered!" echo "${MAIL_DATE}: ${SCRIPT_NAME}(${MAIL_TO}) ${MAIL_QUOTA_PERCENT}% delivered!" >> /home/${SCRIPT_NAME}.log -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

1 1

[Dovecot] Question: Is Server Side Search announced somehow via the IMAP CAPABILITY string?
by Charles Marcus 28 Feb '12

28 Feb '12

Hey Timo, Subject says it all... This question is a result of an ongoing discussion on the mozilla enterprise list... Is there a standard/reliable way for an IMAP client to determine that an IMAP server supports server side search (with indexes)? Thanks, -- Best regards, Charles

2 4

[Dovecot] Deny create folders
by S. Kremer 28 Feb '12

28 Feb '12

Hi all, is it possible to configure dovecot in that way that special folders do not create automatically by some imap clients? i.e: outlook or thunderbird creates a folder junk-mail i would like that such folders are not created automatically or by users Best regards Stefan

5 6

[Dovecot] ANN: automx - automated mail account provisioning
by Patrick Ben Koetter 28 Feb '12

28 Feb '12

automx I am pleased to announce automx a tool that makes setting up a mail account easy. All your users need to provide is real name, mail address and password. Their mail client and automx will safely handle the rest. Say goodbye to mistyped server settings! Put an end to endless phone calls trying to coach users to configure settings, whose dialogs they can't find. Raise user satisfaction, relieve support and regain time to work on other issues. automx unifies Microsofts and Mozillas mail account provisioning standards in one powerful Open Source tool. Choose from many backends, including LDAP and SQL, and let automx create standard and individualized profiles for multiple domains on the fly! See the details on http://automx.org. p@rick -- state of mind () Digitale Kommunikation http://www.state-of-mind.de Franziskanerstraße 15 Telefon +49 89 3090 4664 81669 München Telefax +49 89 3090 4666 Amtsgericht München Partnerschaftsregister PR 563

1 0

[Dovecot] POP/IMAP on proxy rip issue
by Tomislav Mihalicek 28 Feb '12

28 Feb '12

I have a proxy setup for pop/imap. The proxies are defined in login_trusted_networks = x.x.x.x and for the imap it works fine but for pop3 connections displays the ip address of proxy IP... Dovecots are both 1.2 from the debian repo deb http://xi.rename-it.nl/debian/ stable-auto/dovecot-1.2 main thanks -- View this message in context: http://old.nabble.com/POP-IMAP-on-proxy-rip-issue-tp33400491p33400491.html Sent from the Dovecot mailing list archive at Nabble.com.

2 3

[Dovecot] remove messages once downloaded
by julioarr＠fisica.uh.cu 28 Feb '12

28 Feb '12

I need some help with the dovecot configuration. I want to remove downloaded messages from Mail Server once the messages have been successfully downloaded by pop3-clients, even when the clients have been configured to save copy of messages in the Server. thanks, Julio

4 5

[Dovecot] LDA alias resolution problems..
by Nick Warr 28 Feb '12

28 Feb '12

I use postfix + dovecot LDA + mysql virtual users and up til friday, everything was working just fine. Dovecot is 2.0.beta6 (3156315704ef) Like I said, up til friday, when I added a vacation entry into postfix (which I have now removed to see if it was the reason) mails to the alias virusalert (which is aliased to me) went through just fine. Now I get these sort of errors from the LDA: Feb 27 11:54:03 cluster2 postfix/pipe[31267]: 866F0A41173: to=<virusalert(a)mobilia.it>, relay=dovecot, delay=357414, delays=357413/0.79/0/0.05, dsn=4.3.0, status=deferred (temporary failure. Command output: lda: Fatal: Unknown user ) Other aliases work perfectly, the only difference is that these emails are of local origin, (they're messages from Amavisd) I'm not sure why this has started to be a problem. Can anyone give me an idea where I should start looking? Nick

4 9

[Dovecot] iPhone and custom imap folders problem
by "Przemysław.Orzechowski" 27 Feb '12

27 Feb '12

Hi Im using Dovecot 1.0.10 and everything seems work ok except one client He is accessing his mailbox using iPhone There are several custom folders created and mail is directed to them using procmail The problem is iPhone mail app only sees changes in INBOX and when new mail arrives to other folders it will not see it unlers user accesses this particular folder Is there some kind of workaround for this? Im quite sure its iPhones fault as all other email clients are workin perfectly fine.

6 5

[Dovecot] value for client_limit
by ml 27 Feb '12

27 Feb '12

hello guys hello master Timo i build the last release of dovecot on my centos 5 work well and fine but what the correct value for client limit in service auth { client_limit=6000 } and service anvil { client_limit=6000 } my current dovecot -n ks37777 i386]# dovecot -n # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.31.5-xxxx-rt14-ipv6-32 i686 CentOS release 5.7 (Final) auth_mechanisms = plain login base_dir = /var/run/dovecot/ lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = [::] log_path = /var/log/maillog log_timestamp = %Y-%m-%d %H:%M:%S login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c mail_debug = yes mail_location = maildir:~/Maildir mail_max_userip_connections = 30 mail_plugins = " quota trash zlib" managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest namespace { inbox = yes location = prefix = separator = . } passdb { driver = pam } plugin { autocreate = Trash autocreate2 = Junk autocreate3 = Sent autocreate4 = Drafts autosubscribe = Trash autosubscribe2 = Junk autosubscribe3 = Sent autosubscribe4 = Drafts deleted_to_trash_folder = Trash plugin = $mail_plugins autocreate managesieve sieve quota quota = maildir:User quota quota_exceeded_message = Quota exceeded, please go to http://www.fakessh.eu/over_quota_help.html for instructions on how to fix this. quota_rule = *:storage=10GB quota_rule2 = Trash:storage=+10% quota_rule3 = Spam:storage=+20% quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_before = /var/sieve-scripts/roundcube.sieve sieve_dir = ~/sieve sieve_global_path = whatever trash = /etc/dovecot/dovecot-trash.conf.ext zlib_save = bz2 zlib_save_level = 9 } protocols = sieve imap pop3 service anvil { client_limit = 6000 } service auth { client_limit = 6000 process_limit = 1 unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0600 user = postfix } unix_listener auth-master { mode = 0666 } unix_listener auth-userdb { mode = 0666 } vsz_limit = 64 M } service imap-login { client_limit = 0 inet_listener imap { port = 0 } inet_listener imaps { address = * , [::] port = 993 } process_limit = 1024 service_count = 1 vsz_limit = 64 M } service imap { process_limit = 1024 process_min_avail = 0 service_count = 1 vsz_limit = 64 M } service managesieve-login { inet_listener managesieve-login { address = * , [::] port = 2000 } process_limit = 1 vsz_limit = 64 M } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { address = * , [::] port = 995 } process_limit = 1 vsz_limit = 64 M } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = mail } user = dovecot } ssl_ca = </etc/pki/tls/certs/class3.crt ssl_cert = </etc/pki/tls/certs/ks37777.kimsufi.com.cert ssl_key = </etc/pki/tls/private/ks37777.kimsufi.com.key ssl_verify_client_cert = yes userdb { driver = passwd } userdb { driver = passwd } version_ignore = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep imap_max_line_length = 64 k mail_plugins = " quota trash zlib autocreate quota imap_quota zlib imap_zlib" } protocol pop3 { mail_plugins = autocreate quota quota autocreate zlib deleted_to_trash pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s } protocol lda { hostname = r13151.ovh.net info_log_path = log_path = mail_plugins = autocreate sieve quota postmaster_address = postmaster(a)fakessh.eu sendmail_path = /usr/lib/sendmail } protocol sieve { managesieve_implementation_string = dovecot managesieve_logout_format = bytes ( in=%i : out=%o ) managesieve_max_line_length = 65536 } -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC2626742 gpg --keyserver pgp.mit.edu --recv-key C2626742 http://urlshort.eu fakessh @ http://gplus.to/sshfake http://gplus.to/sshswilting http://gplus.to/john.swilting https://lists.fakessh.eu/mailman/ This list is moderated by me, but all applications will be accepted provided they receive a note of presentation

3 2

[Dovecot] Mail delivery to subfolders via address extension, and prefered lda method
by Micha Krause 27 Feb '12

27 Feb '12

Hi, I want to deliver mails directly to subfolders, based on address extensions. Example: Emails sent to: micha+test(a)example.com Should be stored into user micha, folder INBOX.test I was able to reproduce this with exim and dovecot-lda: command = /usr/lib/dovecot/dovecot-lda -e -m "INBOX.${substr_1:$local_part_suffix}" But I was wondering if I could do this within dovecot, which would enable me to use LMTP instead of dovecot-lda. Which brings me to my second question: Which method is "better" for dovecot, lda or LMTP? Micha Krause

2 2

[Dovecot] Virtual Folders
by jacob＠alltechservices-ia.com 27 Feb '12

27 Feb '12

Hello, I am trying to get virtual folders to work properly, and I can't seem to. I will be as detailed as possible to remove confusion. Thank you in advance. Goal: Essentially, a gmail clone, but one that I can make work on cPanel hosts with roundcube and squirrel mail, etc. By default, cpanel creates user mail dir structure of (maildir++) inbox, drafts, sent, junk, and trash (with no dovecot specific files until first login) I would like to replace all those folders with virtual representations with more capabilities. I would like to achieve the conversation view that gmail has pulled off so well. cPanel, stock, generates the following dovecot -n: (i am still not sure how it negotiates mail_location yet) # 1.2.17: /etc/dovecot.conf # OS: Linux 2.6.18-238.5.1.el5xen x86_64 CentOS release 5.7 (Final) ssl_cert_file: /etc/dovecot/ssl/dovecot.crt ssl_key_file: /etc/dovecot/ssl/dovecot.key ssl_cipher_list: ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login login_process_per_connection: no login_processes_count: 10 login_max_processes_count: 100 login_max_connections: 500 mail_max_userip_connections: 200 maildir_copy_preserve_filename: yes mail_plugins: quota imap_quota namespace: type: private prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)example.com auth default: mechanisms: plain login cache_size: 2048 username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789!#$-=?^_{}~./@+% passdb: driver: checkpassword args: /usr/local/cpanel/bin/dovecot-auth userdb: driver: prefetch socket: type: listen client: path: /var/run/dovecot/auth-client mode: 438 plugin: quota: maildir quota_rule: Trash:ignore I started a test box with Debian running the same version of dovecot (1.2.x) and on that system I run into problems every time I make a virtual folder a root folder. I assume it is trying to look up a normal folder instead of the virtual ones and I am confusing it. So I came here because it would be really really neat if I could pull this off. Again, thank you in advance. -cornfeed

2 1

[Dovecot] Dovecot 2.1 with custom OpenSSL fails to build
by Andreas M. Kirchwitz 27 Feb '12

27 Feb '12

Hello Dovecot users! There seems to be a new dependency in some modules (eg, lib-storage, libdovecot-lda, libdovecot-ssl) on OpenSSL. In Dovecot 2.0, those modules didn't require OpenSSL, but 2.1 does. For the linking process the path to the OpenSSL library isn't specified properly (SSL_LIBS). Dovecot fails to build if OpenSSL is in a non-standard path. (Haven't checked if SSL_CFLAGS isn't properly used as well.) Example for lib-storage: env SSL_CFLAGS="-I/usr/local/ssl/include" SSL_LIBS="-L/usr/local/ssl/lib -Wl,-R/usr/local/ssl/lib -lcrypto -lssl" ./configure --prefix=/usr/local/${DOVECOTVER} --with-ssl=openssl --with-ssldir=/usr/local/${DOVECOTVER}/etc/dovecot/certs make gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-master -I../../src/lib-settings -I../../src/lib-mail -I../../src/lib-storage -DPKG_RUNDIR=\""/usr/local/Dovecot-2.1.1/var/run/dovecot"\" -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/usr/local/ssl/include -MT master-connection.o -MD -MP -MF .deps/master-connection.Tpo -c -o master-connection.o master-connection.c mv -f .deps/master-connection.Tpo .deps/master-connection.Po /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/usr/local/ssl/include -no-undefined -Wl,--as-needed -o indexer-worker indexer-worker.o indexer-worker-settings.o master-connection.o ../../src/lib-storage/libdovecot-storage.la ../../src/lib-dovecot/libdovecot.la -export-dynamic -ldl -lrt libtool: link: gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/usr/local/ssl/include -Wl,--as-needed -o .libs/indexer-worker indexer-worker.o indexer-worker-settings.o master-connection.o -Wl,--export-dynamic ../../src/lib-storage/.libs/libdovecot-storage.so ../../src/lib-dovecot/.libs/libdovecot.so -ldl -lrt -Wl,-rpath -Wl,/usr/local/Dovecot-2.1.1/lib/dovecot /usr/bin/ld: warning: libcrypto.so.1.0.0, needed by ../../src/lib-storage/.libs/libdovecot-storage.so, not found (try using -rpath or -rpath-link) /usr/bin/ld: warning: libssl.so.1.0.0, needed by ../../src/lib-storage/.libs/libdovecot-storage.so, not found (try using -rpath or -rpath-link) ../../src/lib-storage/.libs/libdovecot-storage.so: undefined reference to `OBJ_txt2nid' ../../src/lib-storage/.libs/libdovecot-storage.so: undefined reference to `SSL_set_ex_data' [...] # ldd src/lib*/.libs/*.so src/lib-dovecot/.libs/libdovecot.so: linux-gate.so.1 => (0x00979000) libdl.so.2 => /lib/libdl.so.2 (0x00c31000) librt.so.1 => /lib/librt.so.1 (0x009ed000) libc.so.6 => /lib/libc.so.6 (0x0054d000) /lib/ld-linux.so.2 (0x00c12000) libpthread.so.0 => /lib/libpthread.so.0 (0x008f4000) src/lib-lda/.libs/libdovecot-lda.so: linux-gate.so.1 => (0x0096d000) libdovecot-storage.so.0 => /usr/local/src/dovecot-2.1.1/src/lib-storage/.libs/libdovecot-storage.so.0 (0x00ae4000) libdovecot.so.0 => /usr/local/src/dovecot-2.1.1/src/lib-dovecot/.libs/libdovecot.so.0 (0x00110000) librt.so.1 => /lib/librt.so.1 (0x00189000) libc.so.6 => /lib/libc.so.6 (0x00192000) libcrypto.so.1.0.0 => not found libssl.so.1.0.0 => not found libdl.so.2 => /lib/libdl.so.2 (0x0031c000) libpthread.so.0 => /lib/libpthread.so.0 (0x00ebc000) /lib/ld-linux.so.2 (0x003f8000) src/lib-sql/.libs/libdovecot-sql.so: linux-gate.so.1 => (0x00a95000) libdovecot.so.0 => /usr/local/src/dovecot-2.1.1/src/lib-dovecot/.libs/libdovecot.so.0 (0x002b6000) libdl.so.2 => /lib/libdl.so.2 (0x00ab8000) librt.so.1 => /lib/librt.so.1 (0x0072a000) libc.so.6 => /lib/libc.so.6 (0x008f7000) /lib/ld-linux.so.2 (0x00ebd000) libpthread.so.0 => /lib/libpthread.so.0 (0x00619000) src/lib-ssl-iostream/.libs/libdovecot-ssl.so: linux-gate.so.1 => (0x00da6000) libcrypto.so.1.0.0 => not found libssl.so.1.0.0 => not found libdl.so.2 => /lib/libdl.so.2 (0x00df0000) librt.so.1 => /lib/librt.so.1 (0x00112000) libc.so.6 => /lib/libc.so.6 (0x00b5e000) /lib/ld-linux.so.2 (0x00e76000) libpthread.so.0 => /lib/libpthread.so.0 (0x005a6000) src/lib-storage/.libs/libdovecot-storage.so: linux-gate.so.1 => (0x006ed000) libcrypto.so.1.0.0 => not found libssl.so.1.0.0 => not found libdovecot.so.0 => /usr/local/src/dovecot-2.1.1/src/lib-dovecot/.libs/libdovecot.so.0 (0x00c66000) libdl.so.2 => /lib/libdl.so.2 (0x00491000) librt.so.1 => /lib/librt.so.1 (0x00be2000) libc.so.6 => /lib/libc.so.6 (0x00110000) /lib/ld-linux.so.2 (0x0036b000) libpthread.so.0 => /lib/libpthread.so.0 (0x0029a000) Without SSL_CFLAGS and SSL_LIBS but just PKG_CONFIG_PATH, it also won't work. Help appreciated ... Andreas

2 1

[Dovecot] Error with 2.0.18
by Ralf Hildebrandt 27 Feb '12

27 Feb '12

Today I found this in my log: Feb 26 14:27:51 postamt dovecot: imap(tscxxxf): Error: mmap(/home/t/s/tscxxxf/Maildir/dovecot.index.search.uids) failed: Cannot allocate memory Feb 26 14:27:51 postamt dovecot: imap(tscxxxf): Error: Corrupted squat uidlist file /home/t/s/tscxxxf/Maildir/dovecot.index.search.uids: uidlist not found Feb 26 14:27:52 postamt dovecot: imap(tscxxxf): Panic: file squat-trie.c: line 289 (squat_trie_lock): assertion failed: (trie->fd != -1) Feb 26 14:27:52 postamt dovecot: imap(tscxxxf): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x3d44a) [0xb771644a] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x3d4bb) [0xb77164bb] -> /usr/local/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xb7716d87] -> /usr/local/lib/dovecot/lib21_fts_squat_plugin.so(+0x3bfa) [0xb74e1bfa] -> /usr/local/lib/dovecot/lib21_fts_squat_plugin.so(squat_trie_build_deinit+0x9fc) [0xb74e4d3c] -> /usr/local/lib/dovecot/lib21_fts_squat_plugin.so(+0x2a95) [0xb74e0a95] -> /usr/local/lib/dovecot/lib20_fts_plugin.so(fts_backend_build_deinit+0x1b) [0xb752f6bb] -> /usr/local/lib/dovecot/lib20_fts_plugin.so(+0x3726) [0xb7530726] -> /usr/local/lib/dovecot/lib20_fts_plugin.so(+0x51d3) [0xb75321d3] -> /usr/local/lib/dovecot/lib20_fts_plugin.so(+0x5c34) [0xb7532c34] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_search_next_nonblock+0x3b) [0xb778b0cb] -> dovecot/imap [tscxxxf 141.42.206.38 SELECT UID SEARCH]() [0x805ce6e] -> dovecot/imap [tscxxxf 141.42.206.38 SELECT UID SEARC Feb 26 14:27:55 postamt dovecot: master: Error: service(imap): child 18468 killed with signal 6 (core dumped) -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 2

[Dovecot] Dovecot altmove questions
by Maria Arrea 27 Feb '12

27 Feb '12

Hello We are using Dovecot 2.0.17 with mdbox+zlib and we are evaluating alternative storage. These are the relevant settings mdbox_rotate_interval = 1d mdbox_rotate_size=60m [...] zlib_save_level = 9 # 1..9 zlib_save = gz # or bz2 [...] zlib plugin enabled in dovecot-lda These are my questions: 1º General mdbox question. We are happy usings zlib_save, but we would like to try bzip2 compression. Can we change zlib to bzlib without problems? In other words, can we mix & match gzipped and bzipped messages in the same mdbox file ? 2º With doveadm altmove we can move messages matching a pattern to alternate storage. I have read an older post in this mailing list about passing specific mdbox options to doveadm altmove. Should be a good idea to have a "main" mdbox area with zlib 9 and mdbox_rotate=1d and mdox_rotate_size=60m and an "alternate area" with bzip9, mdbox_rotate=1 week and rotate_size > 60 MB? In the alternate area should only be "old" mail (1 year older). 3º We have separate raids for indexes (raid 1+0) and mdboxes (raid 5). We have almost 3 TB of gzipped mdboxes, and our backup (bacula) is taking almost 16 hours to make a full backup. Our main problem is that indexes are backupd hours before mdboxes, and that bring us some inconsistencies. What is the "right" way of backing up for separate indexes and mdboxes? Thank you for your support. Maria

3 2

[Dovecot] IMAP-proxy or not with sogo webmail and dovecot backend
by Jan-Frode Myklebust 27 Feb '12

27 Feb '12

We've been collecting some stats to see what kind of benefits UP/SquirrelMail's IMAP Proxy in for our SOGo webmail users. Dovecot is running in High-performance mode http://wiki2.dovecot.org/LoginProcess with authentication caching http://wiki2.dovecot.org/Authentication/Caching During the weekend two servers (webmail3 and webmail4) has been running with local imapproxy and two servers without (webmail1 and webmail2). Each server has served about 1 million http requests, over 3 days. server avg. response time # requests ---------------------------------------------------- webmail1.example.net 0.370411 1092386 webmail2.example.net 0.374227 1045141 webmail3.example.net 0.378097 1043919 imapproxy webmail4.example.net 0.378593 1028653 imapproxy ONLY requests that took more than 5 seconds to process: server avg. response time # requests ---------------------------------------------------- webmail1.example.net 26.048 1125 webmail2.example.net 26.2997 1080 webmail3.example.net 28.5596 808 imapproxy webmail4.example.net 27.1004 964 imapproxy ONLY requests that took more than 10 seconds to process: server avg. response time # requests ---------------------------------------------------- webmail1.example.net 49.1407 516 webmail2.example.net 53.0139 459 webmail3.example.net 59.7906 333 imapproxy webmail4.example.net 58.167 384 imapproxy The responstimes are not very fast, but they do seem to support the claim that an imapproxy isn't needed for dovecot. -jf

5 31

[Dovecot] FreeBSD maintainer ?
by Frank Bonnet 27 Feb '12

27 Feb '12

Hello Does the FreeBSD Dovecot's port maintainer read this mailing-list ? Thanks

4 4

[Dovecot] v2.0.13 problems after kernel patch for CVE-2011-1083 applied on Centos 5
by Doug Henderson 27 Feb '12

27 Feb '12

Greetings, This email is both a request for assistance/help and a heads-up. [8irgehuq] CVE-2011-1083: Algorithmic denial of service in epoll. After ksplice automatically installed the above patch on our mail servers, most/all IMAP/POP3 connections began experiencing time-outs trying to connect, or extreme timeouts in the auth procedure. dovecot: imap-login: Disconnected (no auth attempts): rip=a.a.a.a, lip=b.b.b.b, TLS handshaking: Disconnected dovecot: pop3-login: Disconnected (no auth attempts): rip=a.a.a.a, lip=b.b.b.b, TLS handshaking: Disconnected dovecot: pop3-login: Panic: epoll_ctl(add, 6) failed: Invalid argument dovecot: pop3-login: Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0 [0x3cb543baa0] -> /usr/lib64/dovecot/libdovecot.so.0 [0x3cb543baf6] -> /usr/lib64/dovecot/libdovecot.so.0 [0x3cb543afb3] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handle_add+0x118) [0x3cb5447708] -> /usr/lib64/dovecot/libdovecot.so.0(io_add+0xa5) [0x3cb5446e15] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_init_finish+0x1c6) [0x3cb54355a6] -> /usr/lib64/dovecot/libdovecot-login.so.0(main+0x136) [0x37a000bdf6] -> /lib64/libc.so.6(__libc_start_main+0xf4) [0x3cb301d994] -> dovecot/pop3-login(main+0x49) [0x401b99] dovecot: master: Error: service(pop3-login): child 27603 killed with signal 6 (core not dumped - add -D parameter to service pop3-login { executable } dovecot: master: Error: service(pop3-login): command startup failed, throttling dovecot: imap-login: Panic: epoll_ctl(add, 6) failed: Invalid argument dovecot: imap-login: Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0 [0x3cb543baa0] -> /usr/lib64/dovecot/libdovecot.so.0 [0x3cb543baf6] -> /usr/lib64/dovecot/libdovecot.so.0 [0x3cb543afb3] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handle_add+0x118) [0x3cb5447708] -> /usr/lib64/dovecot/libdovecot.so.0(io_add+0xa5) [0x3cb5446e15] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_init_finish+0x1c6) [0x3cb54355a6] -> /usr/lib64/dovecot/libdovecot-login.so.0(main+0x136) [0x37a000bdf6] -> /lib64/libc.so.6(__libc_start_main+0xf4) [0x3cb301d994] -> dovecot/imap-login(main+0x39) [0x402069] dovecot: master: Error: service(imap-login): child 27604 killed with signal 6 (core not dumped - add -D parameter to service imap-login { executable } Once this patch was removed, everything started working again. Is it possible that dovecot is trying to re-add already-added connections to the polling list - which this specific 'patch' prevents? We haven't dug deeper yet, but the error is being thrown from the method io_loop_handle_add in ioloop-epoll.c http://hg.dovecot.org/dovecot-2.0/file/aa8dfa085a99/src/lib/ioloop-epoll.c Thanks Doug

3 7

[Dovecot] upgrade to dovecot 2.1.1 any question
by ml 27 Feb '12

27 Feb '12

hi guys hi master of "Fu" hi Timo I am having problems to migrate to dovecot dovecot 2.0.18 to 2.1.1 I encounter fatal errors. I created it myself rpms available here http://ns.fakessh.eu/rpms/dovecot-2.1.1-1.centme.el5.src.rpm I can not run dovecot with this config file like this http://ns.fakessh.eu/rpms/dovecot-2.1.1-1.centme.el5.src.rpm i run this config ks37777 ~]# dovecot -n # 2.0.18: /etc/dovecot/dovecot.conf # OS: Linux 2.6.31.5-xxxx-rt14-ipv6-32 i686 CentOS release 5.7 (Final) auth_mechanisms = plain login base_dir = /var/run/dovecot/ lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = [::] log_path = /var/log/maillog log_timestamp = %Y-%m-%d %H:%M:%S login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c mail_debug = yes mail_location = maildir:~/Maildir mail_max_userip_connections = 30 mail_plugins = " quota trash zlib" managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest namespace { inbox = yes location = prefix = separator = . } passdb { driver = pam } plugin { antispam_mail_notspam = --ham antispam_mail_sendmail = /usr/bin/sa-learn antispam_mail_sendmail_args = --username=%u antispam_mail_spam = --spam antispam_mail_tmpdir = /tmp antispam_signature = X-Spam-Flag antispam_signature_missing = move antispam_spam = SPAM;Spam;spam;Junk;junk antispam_trash = trash;Trash;Deleted Items;Deleted Messages autocreate = Trash autocreate2 = Junk autocreate3 = Sent autocreate4 = Drafts autosubscribe = Trash autosubscribe2 = Junk autosubscribe3 = Sent autosubscribe4 = Drafts deleted_to_trash_folder = Trash plugin = $mail_plugins autocreate managesieve sieve quota quota = maildir:User quota quota_exceeded_message = Quota exceeded, please go to http://www.fakessh.eu/over_quota_help.html for instructions on how to fix this. quota_rule = *:storage=10GB quota_rule2 = Trash:storage=+10% quota_rule3 = Spam:storage=+20% quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_before = /var/sieve-scripts/roundcube.sieve sieve_dir = ~/sieve sieve_global_path = whatever trash = /etc/dovecot/dovecot-trash.conf.ext zlib_save = bz2 zlib_save_level = 9 } protocols = sieve imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0600 user = postfix } unix_listener auth-master { mode = 0666 } unix_listener auth-userdb { mode = 0666 } vsz_limit = 64 M } service imap-login { inet_listener imap { port = 0 } inet_listener imaps { address = * , [::] port = 993 } process_limit = 1 vsz_limit = 64 M } service imap { client_limit = 1024 service_count = 0 } service managesieve-login { inet_listener managesieve-login { address = * , [::] port = 2000 } process_limit = 1 vsz_limit = 64 M } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { address = * , [::] port = 995 } process_limit = 1 vsz_limit = 64 M } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = mail } user = dovecot } ssl_ca = </etc/pki/tls/certs/class3.crt ssl_cert = </etc/pki/tls/certs/ks37777.kimsufi.com.cert ssl_key = </etc/pki/tls/private/ks37777.kimsufi.com.key ssl_verify_client_cert = yes userdb { driver = passwd } userdb { driver = passwd } version_ignore = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep imap_max_line_length = 64 k mail_plugins = " quota trash zlib autocreate quota imap_quota zlib antispam imap_zlib" } protocol pop3 { mail_plugins = autocreate quota quota autocreate zlib deleted_to_trash pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s } protocol lda { hostname = r13151.ovh.net info_log_path = log_path = mail_plugins = autocreate sieve quota postmaster_address = postmaster(a)fakessh.eu sendmail_path = /usr/lib/sendmail } protocol sieve { managesieve_implementation_string = dovecot managesieve_logout_format = bytes ( in=%i : out=%o ) managesieve_max_line_length = 65536 } -- http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xC2626742 gpg --keyserver pgp.mit.edu --recv-key C2626742 http://urlshort.eu fakessh @ http://gplus.to/sshfake http://gplus.to/sshswilting http://gplus.to/john.swilting https://lists.fakessh.eu/mailman/ This list is moderated by me, but all applications will be accepted provided they receive a note of presentation

2 7

[Dovecot] deliver(test@[***domain_name***]): Fatal: setgid(5000) failed with ... Operation not permitted
by fxCode 26 Feb '12

26 Feb '12

Hi, I am relatively new to linux, and have set up my first lamp server around a month ago. The server is housed in a data centre a few miles from my house, and is working as a web server (with apache, tomcat, mysql) just fine. I have now been trying for a week to get Postfix and Dovecot working with postfixadmin and mysql. (below I have replaced my test domain name with [***domain_name***]) The story so far; I can send 'welcome' emails from within postfix admin to an external email address... and they are received by the mail client on my computer at home no problem. I can set up alias email addresses within postfix admin, such as webmaster@[***domain_name***], and emails sent to this address are redirected to the proper address as expected. But - if I set up a standard mailbox within postfix admin - test@[***domain_name***] , and email it from my home system, nothing appear in postfixadmin (after a fetch request) or the mysql database. Here is the fail point in my mail.log file ; Feb 26 12:50:27 quantum dovecot: deliver(test@[***domain_name***]): Fatal: setgid(5000) failed with euid=8(mail), gid=8(mail), egid=8(mail): Operation not permitted I don't know what the setguid(5000) is, or where it is being set, or what it should be! I have been changing permissions with the 'socket listen' section of my /etc/dovecot/dovecot.conf file, and when I restart dovecot it creates the auth-master file with the permissions as expected; socket listen { master { path = /var/run/dovecot/auth-master mode = 0777 user = vmail group = mail } client { path = /var/spool/postfix/private/auth mode = 432 #user = postfix #group = postfix } } my mail folders should be located at /var/vmail, but the folder is empty. I have chmod the permissions to be as follows; me@myserver: ls -ld /var/vmail drwxrwxrwx 2 vmail mail 4096 2012-02-11 08:40 /var/vmail Can anyone spot where this is going wrong? Thanks in advance for any help, it is very very much appreciated!!! My hosts file is as follows; 127.0.0.1 localhost [**server_ip***] quantum.[***domain_name***] quantum # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ...and 'dovecot -n' replies as follows; me@myserver: dovecot -n # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-38-server x86_64 Ubuntu 10.04.4 LTS ext4 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_location: maildir:/var/vmail/%d/%n mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 lda: log_path: /var/log/dovecot-deliver.log auth_socket_path: /var/run/dovecot/auth-master postmaster_address: fxcode(a)me.com mail_plugins: sieve auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 master: path: /var/run/dovecot/auth-master mode: 511 user: vmail group: mail

1 1

[Dovecot] IMAP NOTIFY extension
by Timo Sirainen 26 Feb '12

26 Feb '12

http://hg.dovecot.org/dovecot-2.2-notify/ contains the initial implementation of IMAP NOTIFY extension. It's less than half-working, but the difficult part of it is done I think. If I give it a command like: x notify set (personal (messagenew messageexpunge flagchange)) and then in another session I copy a message to another mailbox, it sends: * STATUS "foobar" (MESSAGES 77 UIDNEXT 78 UIDVALIDITY 1329431281 UNSEEN 75) This requires mailbox_list_index=yes to work. It works by following the dovecot.list.index.log changes, so it's going to be pretty efficient. Some TODO that I've so far noticed: - NOTIFY is handled currently only for non-selected mailboxes. (handling the new features for selected mailbox should be simple) - initial STATUS sending isn't done with STATUS option - only MessageNew, MessageExpunge and FlagChange notifications are sent currently - MailboxName handling probably needs to be able to get "old" and "new" views, figure out what changed in them and send those changes (dsync has similar code) - mailbox list indexes seem to be adding too much stuff, which results in: - STATUS duplicates, but there should already be code to avoid these so I'm not sure what's going on - ACLs and shared mailboxes don't work right - add 0.5s delay before notifying IMAP code, so multiple changes can be bundled into one

1 0

[Dovecot] Solr not indexing
by Daniel L. Miller 26 Feb '12

26 Feb '12

What did I do wrong to make this happen? "doveadm(dmiller(a)amfes.com): Debug: fts: Indexes disabled for namespace 'shared/%n/'" doveadm -D fts rescan -u dmiller(a)amfes.com doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib01_acl_plugin.so doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib20_fts_plugin.so doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/lib21_fts_solr_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/local/lib/dovecot/doveadm doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib10_doveadm_acl_plugin.so doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_lookup (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/local/lib/dovecot/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/local/lib/dovecot/doveadm/lib20_doveadm_fts_plugin.so doveadm(dmiller(a)amfes.com): Debug: Added userdb setting: mail=mdbox:/var/mail/amfes.com/dmiller/mdbox doveadm(dmiller(a)amfes.com): Debug: Added userdb setting: plugin/acl_groups='allshared' doveadm(dmiller(a)amfes.com): Debug: Effective uid=5000, gid=8, home=/var/mail/amfes.com/dmiller doveadm(dmiller(a)amfes.com): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/var/mail/amfes.com/dmiller/mdbox doveadm(dmiller(a)amfes.com): Debug: fs: root=/var/mail/amfes.com/dmiller/mdbox, index=, control=, inbox=, alt= doveadm(dmiller(a)amfes.com): Debug: Namespace : Using permissions from /var/mail/amfes.com/dmiller/mdbox: mode=0700 gid=-1 doveadm(dmiller(a)amfes.com): Debug: acl: initializing backend with data: vfile:/usr/local/etc/dovecot/global-acls:cache_secs=300 doveadm(dmiller(a)amfes.com): Debug: acl: acl username = dmiller(a)amfes.com doveadm(dmiller(a)amfes.com): Debug: acl: owner = 1 doveadm(dmiller(a)amfes.com): Debug: acl vfile: Global ACL directory: /usr/local/etc/dovecot/global-acls doveadm(dmiller(a)amfes.com): Debug: Namespace : type=shared, prefix=shared/%n/, sep=/, inbox=no, hidden=no, list=children, subscriptions=no location=mdbox:/var/mail/%d/%n/mdbox doveadm(dmiller(a)amfes.com): Debug: shared: root=/usr/local/var/run/dovecot, index=, control=, inbox=, alt= doveadm(dmiller(a)amfes.com): Debug: fts: Indexes disabled for namespace 'shared/%n/' doveadm(dmiller(a)amfes.com): Debug: acl: initializing backend with data: vfile:/usr/local/etc/dovecot/global-acls:cache_secs=300 doveadm(dmiller(a)amfes.com): Debug: acl: acl username = dmiller(a)amfes.com doveadm(dmiller(a)amfes.com): Debug: acl: owner = 0 doveadm(dmiller(a)amfes.com): Debug: acl vfile: Global ACL directory: /usr/local/etc/dovecot/global-acls -- Daniel

2 3

[Dovecot] Maildir migration: Courier-imap 4.4.3 to Dovecot 1.2.
by Rafał Radecki 25 Feb '12

25 Feb '12

Hi all. I am currently gathering information about migration of Maildir/ structures from Courier to Dovecot. What do you think about http://wiki.dovecot.org/Migration/Courier ? For each courier Maildir account I want to use http://www.dovecot.org/tools/courier-dovecot-migrate.pl to produce dovecot-uidlist file mv courierimapsubscribed subscriptions sed sed -i 's/INBOX\.//' subscriptions rm -r courierimaphieracl rm courierimapacl rm courierimapkeywords I want also to leave default pop3_uidl_format (%08Xu%08Xv) in dovecot.conf Should I look into something else? Have I missed something? Best regards, Rafal.

3 2

[Dovecot] Apple od/ad authentication problem
by Troy Shafer 25 Feb '12

25 Feb '12

Hello all. Im pretty new to dovecot and postfix world. I'm completely stumped. OS X 10.7.3, behind a Cisco asa NAT. When trying to authenticate (ssl or not) via the webmail interface I get this error... NAT IP is the public ip I assigned. It doesn't work for an AD account or an account local to the Mac server. However it DOES work on the internal LAN. Feb 22 18:15:36 mail dovecot[3501]: auth: Error: od (username,natIP): verify plain: lookup failed for user: username Feb 22 18:15:51 mail dovecot[3501]: auth: Error: od[getpwnam_ext](username,natIP): No record for user I figured I'm missing something in the dovecot config. I have followed apple's kb articles for AD webmail authentication and kerberos, and that works internally.

2 3

[Dovecot] How to limit max number of connections for ip address
by Wilberth Perez 25 Feb '12

25 Feb '12

Hi List: Does any one , knows if is possible configure dovecot for limit max number of connections for IP address? I would like to prevent future fork-bombing attacks for pop3 and imap login process in my email server. Our dovecot version is : 1.2.10 Thanks, Wilberth.

3 4

[Dovecot] How to achieve proper privilege separation?
by "Tóth Attila" 24 Feb '12

24 Feb '12

I'm using a simple mbox config with regular Unix users and pam authentication. I'm also using grsecurity. That's why I see what dovecot does in which users' name. As times goes by and new versions are coming I can frustratedly see, that more and more tasks are performed as root. Why? When I used 1.x series of Dovecot, imap process started in the name of the user whose mbox was accessed. Now I can see, that nearly every task is performed by root. Why? It even tampers with the mail directories of each user as root instead of the user as it was usual long before. Please let me know how should I change the config to make dovecot stop using root privileges and revert it back to the old behavior. Thanks for your help: Dw. Here's my current config: dovecot -n # 2.0.17 (684381041dc4+): /etc/dovecot/dovecot.conf # OS: Linux 3.2.6-hardened i686 Gentoo Base System release 2.0.3 auth_socket_path = /var/run/dovecot/auth-userdb auth_verbose = yes auth_worker_max_count = 16 base_dir = /var/run/dovecot/ disable_plaintext_auth = no first_valid_gid = 99 first_valid_uid = 1000 hostname = host.name last_valid_gid = 65533 last_valid_uid = 1003 listen = * mail_access_groups = mail mail_full_filesystem_access = yes mail_gid = mail mail_location = mbox:~/mail/:INBOX=/var/spool/mail/%u mail_max_keyword_length = 150 mail_privileged_group = mail mail_uid = mail passdb { args = * driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)host.name protocols = imap service auth-worker { user = root } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 1 vsz_limit = 16 M } service imap { process_limit = 4 vsz_limit = 64 M } ssl_cert = </etc/apache2/ssl/cert-file.pem ssl_key = </etc/apache2/ssl/key-file.pem userdb { driver = passwd } verbose_proctitle = yes protocol lda { mail_plugins = sieve } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags imap_max_line_length = 64 k -- dr Tóth Attila, Radiológus, 06-20-825-8057 Attila Toth MD, Radiologist, +36-20-825-8057

2 7

[Dovecot] From Maildir back to smtp
by Marc Perkel 24 Feb '12

24 Feb '12

Not sure how this can be done. Right now I'm running a free backup MX record service. People point their high MX records to my servers and if they go down we store the email. When they come back up it's delivered. What I want to do is have a premium service that would allow them to view through IMAP the stored email. In order to do that I would have to deliver the email locally to a dovecot server - to a single account perhaps - and they can view/forward/delete etc. But - when their server comes back online I'd like to gather up all the delivered email stored in Maildir format and run it back into smtp for delivery. Has anyone even done something like this? Or is there an easier way that I'm missing? Thanks in advance

4 4

[Dovecot] dsync 2.0.x versus 2.1.x field report
by Michael Grimm 24 Feb '12

24 Feb '12

Hi -- I used to run two mailservers with identical MX priorities (poor man's fail-over approach) with Maildir mail folders accessed by Dovecot. Synchronization has been achieved using unison, mirroring all files except dovecot index files. Once in a while some oddities could be observed, like reappearing of deleted mails, duplicates and such alike. But the all-over performance was quite good. Then I wanted to migrate to mdbox, and I became interested in dsync. I did start with 2.0.16 a couple of month ago, and recently upgraded to 2.0.18. My experience with the 2.0.x dsync version is as follows (synchronization time: every minute): -- As long as mail is not stored in corresponding mailboxes at both servers at the same time, all mailboxes become synchronized perfectly well, and no oddites like reappearing of deleted mails or generation of duplicates can be observed. -- If mail is stored into corresponding mailboxes at both servers simultaneously in between two synching runs, it gets worrying. -- If I do run dsync without '-f' those two mailboxes end up in becoming asynchronous. -- If I do run dsync with '-f' both mailboxes will become synchronized let's say in 95% of all synchronization runs. BUT in 5%, I do experience asynchronicity. Here a 'doveadm force-resync' sometimes works, but not always, what worries me a lot. -- I can see the missing mail in the mdbox storage file using UNIX' little helpers but not with the help of dovecot tools. (Or I was unable to use them properly.) -- Modifying MX priorities in a way, that I do now have a primary and backup mailserver scenario, very much reduced the risk of losing legitimate mail. -- But sometimes I do lose some syslog mail being produced at the same time. Therefore I modified runtimes in way to omit synchronicity. Ok, I could have lived with that, but I was anxious to learn, if 2.1.x dsync would perform better ;-) Here my observations sofar (synchronization time: every minute): -- No losses sofar using 'doveadm sync' with '-f' -- A *lot* of reappearing deleted mails or mails moved from one mailbox to the other. -- Quite often I am unable to delete those mails using client functionality (Mail.app, Roundcube). -- In those cases one needs to stop synchronization, run 'doveadm force-resync', delete all reappearing mail (quite a lot sometimes), empty 'Deleted' folders, and finally run 'doveadm purge'. -- Running of 'doveadm sync' without '-f' doesn't improve the situation. Still I do have to struggle with reappearing mails, and sometimes with appearing duplicates. -- I do have a test setup running for 24 hours now, where I do generate test mails in a 6 minutes interval at both servers. Mails become synchronized perfectly well, irrespectively if '-f' is set or not. This is a major improvement to 2.0x. dsync (sofar). -- But running the synchronization without '-f' still shows a *lot* of reappering mail, though. I do have the feeling that dsync became very much improved with regard to missing mail in synchronization, good. But those reappearing mails make me think about switching back to 2.0.x dsync and live with the drawback of preventing mail to arrive synchronously at both servers. Is someone out there experiencing a similar behaviour with dsync 2.1.x regarding reappearing, thus indelible mail? Regards, Michael

1 0

[Dovecot] Creating and interacting with array inside plugin
by Alex Baule 24 Feb '12

24 Feb '12

Hi Timo.... I Follow your instruction to look inside quota plugin to get the notification from dovecot that expunged a message, that's Ok. Follow the quota, it's use a array to keep all uids from a email expunged, to compare with uid that is got in notify_sync, that's OK too, but to me i need to keep uid and a char* with my body name, to erase it too. I made this: struct emexis_ids_x_uis{ uint32_t ids; char *uis_file; }; struct emexis_mailbox { union mailbox_module_context module_ctx; ARRAY_DEFINE(expunge_uids, struct emexis_ids_x_uis); }; ok, inside my expunged rewrite function i create the array like quota does, and append it to my array. struct emexis_ids_x_uis append_uis; append_uis.ids = _mail->uid; append_uis.uis_file = bodyFile; array_append(&ebox->expunge_uids, &append_uis, 1); But when i do a foreach in this Array, my ids is OK, but my uis_file has tha same value every time (the value is the lasted value inserted). Append to UID array (156) --> (/storage/gss/emexis/common/t/33/88/t33889eb1bccd28fd6643ebc3ecf548b12a1ad095) Append to UID array (157) --> (/storage/gss/emexis/common/t/e3/35/te335c20e978e12d37ad0a35ae009245cd34080c0) Append to UID array (158) --> (/storage/gss/emexis/common/t/0b/83/t0b83efc253c34db35843fc89b655586d628cccaf) Calling Sync Expunged --> (156) Sync Expunged (156 == 156) --> (/storage/gss/emexis/common/t/0b/83/t0b83efc253c34db35843fc89b655586d628cccaf) Sync Expunged Match (156 == 156) --> (/storage/gss/emexis/common/t/0b/83/t0b83efc253c34db35843fc89b655586d628cccaf) Sync Expunged (157 == 156) --> (/storage/gss/emexis/common/t/0b/83/t0b83efc253c34db35843fc89b655586d628cccaf) Sync Expunged (158 == 156) --> (/storage/gss/emexis/common/t/0b/83/t0b83efc253c34db35843fc89b655586d628cccaf) Finish Calling Sync Expunged --> (156) Can i use a struct as a array Item ?? something is wrong with my array creation, append and etc ? Tks Timo !!

2 2

Re: [Dovecot] Why is dovecot involved in my smtp process
by Joseph Tam 24 Feb '12

24 Feb '12

From: "Peter A. Giessel" <pgiessel(a)mac.com>: > Not totally true. Typical cyrus sasl2 implementation used with > sendmail uses an imap server for smtp authentication. I recall having > to tweak the sasl2 configuration on my own sendmail server to talk > correctly with dovecot. I don't recall the exact tweaks. Just to make it clear to the OP, I have a Dovecot/Sendmail/SASL working just fine (which is independent of dovecot). I suspect Peter hit the nail on the head here. Look at the contents of $SASL_INSTALL/lib/Sendmail.conf Mine is (only) pwcheck_method:saslauthd which I think looks up my name service backend via the login and plain plugins. I'm a little hazy on how this was set up, but if you are able to successfully login without dovecot, then it appears you have some sort of authentication stack that will try IMAP first, then fallback to your the other method. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Settings for authentication without an extra password file
by Keith Christian 24 Feb '12

24 Feb '12

Hello, I'm new to dovecot, and, due to having an older version of an OS installed on a test server, I'll be using an older version of dovecot (dovecot-1.0-1.2) to provide IMAP services. On this wiki page (http://wiki.dovecot.org/BasicConfiguration?highlight=%28passwd.dovecot%29) There are instructions for creating a separate dovecot password file: echo "$USER:{PLAIN}password" > passwd.dovecot sudo mv passwd.dovecot /etc So, it appears that two password files will be needed, one for dovecot and one for regular system logins. Is the statement above correct, or am I misreading something? Is there a setting in dovecot.conf which will authenticate IMAP using /etc/password and /etc/shadow, without a separate dovecot password file? ========Keith

2 1

[Dovecot] Why is dovecot involved in my smtp process
by Steve Campbell 23 Feb '12

23 Feb '12

I've been trying to get smtp auth set up for days. All my sendmail and sasl2 stuff seems to be proper, but the user can't use the system on port 587, which is where I require authorization. Now I see where messages are in my maillog of the type: auth: pam_unix(dovecot:auth) : authentication failure ........ Why is dovecot involved in my smtp processes and how do I fix this. I've got some very mad users. The 10-auth.conf file is pretty much stock except for allowing plain text logins. steve campbell

7 12

[Dovecot] Can't connect to my mail server (postfix + dovecot, IMAP) with Thunderbird
by GASPARD Kévin 23 Feb '12

23 Feb '12

I'm sorry, some one tell me my netstat (on IRC) is useless. Also my pastes will be destroyed in something like one day, that's stupid (that's originally for IRC), so this is the output of my : dovecot -n : http://pastebin.com/Tewcb7bm telnet : http://pastebin.com/6gY2puxF netstat -Nnap | grep "dovecot" : http://pastebin.com/yx2wxfWf Sorry for the error.

2 1

[Dovecot] Can't connect to my mail server (postfix + dovecot, IMAP) with Thunderbird
by GASPARD Kévin 23 Feb '12

23 Feb '12

Hi, I've a problem with Dovecot and Thunderbird. Actually I'm trying to setup a virtual host server mail with postfix + dovecot (2.0.9) on CentOS 6.2. This is my dovecot -n : http://pastebin.com/wZWAE5Cj (I guess the errors are not important, that's just saying there is some obsoletes values, I will fix that later until it's not inconvenient to setup correctly dovecot). I've a file to store password (/etc/dovecot/passwd) and when I'm trying to connect with telnet to my host on port 143 it works, after I can log myself with the command «a login user(a)domain.tld passwd» and it works, this is the entire output of the telnet connection : http://pastebin.com/h10cQVqf but actually when I'm trying to connect with thunderbird I've an error about the password and the login, this is a screenshoot : http://images.koshie.fr/TB_problem.png and to finish, there is nothing into the log... The password and the user are corrects ! Of course, dovecot and postfix are started, this is the netstat -a | grep "dovecot" : http://pastebin.com/bwfsS4Tf If you need more informations tell me. PS : Excuse me for my bad english, also I'm new with dovecot. Cordially, GASPARD Kévin

1 0

[Dovecot] v2.1.1 released
by Timo Sirainen 23 Feb '12

23 Feb '12

http://dovecot.org/releases/2.1/dovecot-2.1.1.tar.gz http://dovecot.org/releases/2.1/dovecot-2.1.1.tar.gz.sig v2.1.0 had a couple of bugs, but overall people have been pretty quiet about it. I'm hoping v2.1.2 won't need to be released for many more weeks. :) BTW. v2.2 branch has also been opened in hg. Not much stuff in there yet though. + dsync: If message with same GUID is saved multiple times in session, copy it instead of re-saving. - acl plugin + autocreated mailboxes crashed when listing mailboxes - doveadm force-resync: Don't skip autocreated mailboxes (especially INBOX). - If process runs out of fds, stop listening for new connections only temporarily, not permanently (avoids hangs with process_limit=1 services) - auth: passdb imap crashed for non-login authentication (e.g. smtp).

1 0

Re: [Dovecot] Problem with Postfix + Dovecot + MySQL + Squirrelmail
by Gustavo 22 Feb '12

22 Feb '12

Ok, I study the wikki and the dovecot works. But when I try to send a mail using squirrel, I get this error on logs: Feb 11 18:41:55 jubileu postfix/smtpd[19522]: connect from localhost.localdomain[127.0.0.1] Feb 11 18:41:55 jubileu postfix/smtpd[19522]: warning: xsasl_cyrus_server_get_mechanism_list: no applicable SASL mechanisms Feb 11 18:41:55 jubileu postfix/smtpd[19522]: fatal: no SASL authentication mechanisms Feb 11 18:41:56 jubileu postfix/master[18383]: warning: process /usr/lib/postfix/smtpd pid 19522 exit status 1 Feb 11 18:41:56 jubileu postfix/master[18383]: warning: /usr/lib/postfix/smtpd: bad command startup -- throttling How can I fix this? My conf files seems to be ok: ## Diretorio Base ## base_dir = /var/run/dovecot/ ## Protocolos que ele ira executar ## protocols = imap imaps pop3 pop3s log_timestamp = '%Y-%m-%d %H:%M:%S ' syslog_facility = mail ## Dados do SSL ## ssl_listen = localhost ssl_cert_file = /etc/postfix/mail-cert.pem ssl_key_file = /etc/postfix/mail-key.pem ssl_parameters_regenerate = 168 verbose_ssl = no mail_location = maildir:/var/vmail/%d/%u mail_access_groups = mail mail_debug = no first_valid_uid = 150 last_valid_uid = 150 maildir_copy_with_hardlinks = yes protocol imap { } protocol pop3 { # Login executable location. login_executable = /usr/lib/dovecot/pop3-login mail_executable = /usr/lib/dovecot/pop3 pop3_uidl_format = %08Xu%08Xv } protocol lda { sendmail_path = /usr/lib/sendmail auth_socket_path = /tmp/auth-master } auth_verbose = no auth_debug = no auth default { mechanisms = plain login passdb pam { } passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb passwd { } userdb sql { args = /etc/dovecot/dovecot-sql.conf } socket listen { master { path = /tmp/auth-master mode = 0600 user = vmail group = mail } client { path = /tmp/auth-client mode = 0660 user = vmail group = mail } } } dict { } plugin { } ######################################### And Postfix conf: # SASL Authentication smtpd_sasl_auth_enable = yes smtpd_sasl2_auth_enable = yes smtpd_sasl_exceptions_networks = $mynetworks smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_sasl_path = private/auth smtpd_sasl_application_name = smtpd smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination permit_mynetworks = 127.0.0.0/8, 184.22.103.88/32, 184.22.103.87/32 Thanks!!! > -----Mensagem Original----- From: Timo Sirainen > Sent: Saturday, January 28, 2012 3:51 PM > To: Gustavo > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] Problem with Postfix + Dovecot + MySQL + > Squirrelmail > > On 27.1.2012, at 14.32, Gustavo wrote: > > #service dovecot start >> Starting IMAP/POP3 mail server: dovecotLast died with error (see error >> log for more information): Auth process died too early - shutting down >> > > No need to keep guessing the problem. "See error log for more information" > like it says. http://wiki.dovecot.org/**Logging<http://wiki.dovecot.org/Logging> > > -- Gustavo - clube03(a)gmail.com

2 2

[Dovecot] Where did the message end up?
by Dag Nygren 22 Feb '12

22 Feb '12

Hi all! Just migrated out UW-IMAP installation to Dovecot and so far so good. Had small teething problems though which left me with one question. The scenario was that I have a set of public folders that are only needed by the main company group (gid = company). Then there are some external users as well, not directly in the company group. I set up the public mailbox with permissions 660, owner me and group "company". That is the externals didn't have access to the mail folder. At this point all looked fine, but later there was an email to an external person and this was passed on to deliver by procmail. Procmail logs says all was OK, but there is an entry about the public folder not accessible in the Dovecot log. The email is nowhere to be found. My question: Where is the delivered email? Best Dag

2 5

Re: [Dovecot] Questions still about a uw-imap -> dovecot conversion
by Joseph Tam 22 Feb '12

22 Feb '12

Steve Campbell <campbell(a)cnpapers.com> writes: > > This was piped into a script that Email'd users about the changes > > that was going to happen, what they would expect to see, and a > > FAQ on how to set up a mail client correctly. > > Here, I'm not sure what should be done. The users with the secondary > folders that are not in ~/mail can't seem to get the client configured. "Great artists steal". Google around for a good set of instructions on how to set up IMAP prefix's for various mail clients, and refer your users to that. I also referred them to our webmail (with the correct mail prefix) as a reference to a list of mailboxes they ought to see. If they don't match, then that's a symptom of a bad prefix. > I've tried this and modified the .mailboxlist, but I'm thinking Dovecot > is ignoring this and I'm not sure what it's looking at to determine the > imap folders. > > > - .subscription files were moved into the mail folder > > (don't have to edit prefixes since the aliasing > > will take care of that). > > And when would these .subscription files be created? The first time the > folders would be accessed, or when? This seems to be part of my fix that > I'm getting lost on. Sorry, as Timo intimated, dovecot uses .subscription, which can be adjusted back to .mailboxlist, which uw-imapd uses. You shouldn't have to edit it if you set up namespace aliasing. Just move it from the top-level into your user's mail directory during cutover: (if you use dovecot's default subscription filename) mv $USER/.mailboxlist $USER/mail/.subscription If your IMAP client is still ignoring subscriptions, it usually means the client was configured that way. > > - your setup is fairly close to mine, so you may also run into > > the problem of user having mailboxes with group ownership that > > users are not part of (for example, group "mail" for INBOX set > > by your LDA or personal mailboxes with groups the user is no > > longer a member of) *and* with group permission not mode=0. > > Sendmail sort of requires the "mail" group, does it not? I'll take a > look and see if all users are part of this or not. A crazy solution > would be in order here? I think sendmail works fine if you set your mail spool mode=1777 (like /tmp), but have each inbox mode=0600. This setting will persist. It's sendmail LDA mail.local that's the problem: it autocreates new inboxes with permissions user:mail/660 and unless the user is in group "mail", chaos will ensue. You can maybe do a cron script or some other hack, or better yet, use dovecot LDA, which sets up the perms correctly (and keeps indexes updated). A one time "chmod go-rwx" during cutover is all that is required then. The log entry that points this problem out looks like dovecot: imap(smith): Error: chown(/dc-cache/smith/.imap/xx, group=6(mail)) failed: Operation not permitted (egid=5678(goodgroup), group based on /home/smith/mail/xx - see http://wiki2.dovecot.org/Errors/ChgrpNoPerm) dovecot: imap(smith): Error: mkdir(/dc-cache/smith/.imap/xx) failed: Not owner Joseph Tam <jtam.home(a)gmail.com>

2 1