- dovecot - dovecot.org

[Dovecot] firefox dovecot-sieve
by paul 15 Mar '12

15 Mar '12

Send this to dovecot(a)dovecot.org, not dovecot-owner(a)dovecot.org On 14.3.2012, at 4.45, paul wrote: > HI. I have just started to play with sieve and everything seems ok when > logging on using telnet localhost 4190 and an encoded username/password. > If I try to connect with firefox at localhost:4190 I get > "IMPLEMENTATION" "Dovecot Pigeonhole" > "SIEVE" "fileinto reject envelope encoded-character vacation subaddress > comparator-i;ascii-numeric relational regex imap4flags copy include > variables body enotify environment mailbox date ihave" > "NOTIFY" "mailto" > "SASL" "PLAIN LOGIN" > "STARTTLS" > "VERSION" "1.0" > OK "Dovecot ready." > NO "Error in MANAGESIEVE command received by server." > NO "Error in MANAGESIEVE command received by server." > NO "Invalid characters in atom" > BYE "Too many invalid MANAGESIEVE commands." > my dovecot -n shows > # 2.0.18: /etc/dovecot/dovecot.conf > # OS: Linux 2.6.42.9-1.fc15.i686.PAE i686 Fedora release 15 (Lovelock) > auth_mechanisms = plain login > disable_plaintext_auth = no > mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u > mail_privileged_group = mail > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope > encoded-character vacation subaddress comparator-i;ascii-numeric > relational regex imap4flags copy include variables body enotify > environment mailbox date ihave > mbox_write_locks = fcntl > passdb { > driver = pam > } > plugin { > sieve = ~/.dovecot.sieve > sieve_dir = ~/sieve > } > protocols = imap pop3 lmtp sieve > service managesieve-login { > inet_listener sieve { > port = 4190 > } > } > ssl_cert = </etc/pki/dovecot/certs/dovecot.pem > ssl_key = </etc/pki/dovecot/private/dovecot.pem > userdb { > driver = passwd > } > Have I missed something obvious or does Firefox clash with Managesieve? > Thanks. Paul >

2 1

[Dovecot] Login Failed
by Aydın Demirel 15 Mar '12

15 Mar '12

Hi; We are using scripts for login successes. Is there a feature for login failed status or can it be developed? Regards -- *Aydın Demirel Endersys Ltd. Sistem Destek Mühendisi/ System Support Engineer* * *<<Endersys is the first Advanced Business Partner of Red Hat in Turkey! http://www.europe.redhat.com/partners/endersys/>> Phone : +90 216 470 9423 | GSM : +90 530 401 8203 Fax : +90 216 470 9508 | Web : http://www.endersys.com <http://www.endersys.com/> Blog : http://blog.endersys.com <http://blog.endersys.com/> Twitter : http://www.twitter.com/endersys LPI : The #1 Linux Certification for IT Professionals LPI (Linux Professional Institute) Turkey http://www.lpi-turkey.com <http://www.lpi-turkey.com/>

2 1

[Dovecot] FTS crash
by Joan Moreau 14 Mar '12

14 Mar '12

Hi Timo, I updated my 2.1 from HG, and now the FTS (Squat) plugin makes a segmentation fault. When I remove the plugin from the dovecot.conf, all works fine. No debug available here, but let me know how can I help you. Joan

2 2

[Dovecot] RECENT status always 0
by Arnaud Abélard 14 Mar '12

14 Mar '12

Hello, we are using dovecot 2.0.13 with maildir++ (we migrated away from courrier just a few months ago) and the RECENT status doesn't seem to be working: . STATUS INBOX (MESSAGES UNSEEN RECENT) * STATUS "INBOX" (MESSAGES 35106 RECENT 0 UNSEEN 10) then 2 minutes later: . STATUS INBOX (MESSAGES UNSEEN RECENT) * STATUS "INBOX" (MESSAGES 35106 RECENT 0 UNSEEN 11) How can the UNSEEN count change without the RECENT count changing accordingly? Thanks in advance, Arnaud -- Arnaud Abélard (jabber: arnaud.abelard(a)univ-nantes.fr) Administrateur Système - Responsable Services Web Direction des Systèmes d'Informations Université de Nantes - ne pas utiliser: trapemail(a)univ-nantes.fr

2 1

[Dovecot] Thunderbird Archive to slower storage - sort of alternate storage
by Marcio Merlone 14 Mar '12

14 Mar '12

Hi people, When a user archives a message from Thunderbird it moves to an IMAP folder "Archives", everyone knows that. I use dovecot 1:1.2.9-1ubuntu6.5 on Ubuntu 10.04 and want to move that folder (and respective IMAP sub-folders) to a slower storage, link it to original location and my first idea for this is find -type d -name .Archives\* -print0 | \ while read -d $'\0' archive; do \ mv "$archive" /dead/Emails/jhon.doe/; \ ln -s "/dead/Emails/jhon.doe/$archive" .; done It works, given that the files are not locked. I could restart dovecot before so it would unlock the files, but there is no guarantee it does not get locked again before the find finishes. I took a look on mailling list archives, but could not find something like that and was wondering what you guys use (if any) for such task and what are the recommendations, best practices, solutions for that? Thanks in advance, best regards. -- *Marcio Merlone*

2 5

Re: [Dovecot] \NoSelect on missing folders in LIST
by Peter Mogensen 14 Mar '12

14 Mar '12

On 2012-03-05 16:36, Timo Sirainen wrote: >> Still curious about if Courier is doing something wrong which the scripts just happened to take advantage of. > > Neither behavior is wrong, just different. :) Ok... I were in doubt if I had missed something from the RFC. However... for testing, I tried to create "INBOX.INBOX" on dovecot. But then dovecot answers NO and complains that the folder already exists. Though it's still not on disk and dovecot still doesn't list it with "*". /Peter

2 1

[Dovecot] No passdbs specified in configuration file with passdb/userdb in protocol sections
by btb＠bitrate.net 13 Mar '12

13 Mar '12

hi- i have a configuration in which i'm using different passdb/userdb settings for each of imap, lmtp and smtp [without getting too far off on a tangent, this is so ldap group membership can be used to independently control authorization for receiving [lmtp], retrieving [imap], and sending [smtp/postfix] of email. each passdb/userdb uses a different search filter.] when i use this as my config: # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 3.0.0-15-generic-pae i686 Ubuntu 11.10 auth_debug = yes first_valid_gid = 2000 first_valid_uid = 2000 log_timestamp = "%d.%m.%Y %H.%M.%S " login_greeting = dovecot ready mail_debug = yes protocols = " imap lmtp" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service lmtp { inet_listener lmtp { address = 127.0.0.1 ::1 port = 10026 } } ssl_cert = </etc/dovecot/pki/mra.example.com-cert.pem ssl_key = </etc/dovecot/pki/mra.example.com-key.pem verbose_proctitle = yes protocol imap { mail_max_userip_connections = 20 passdb { args = /etc/dovecot/dovecot-ldap-imap.conf.ext driver = ldap } userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap-imap.conf.ext driver = ldap } } protocol lmtp { userdb { args = /etc/dovecot/dovecot-ldap-lmtp.conf.ext driver = ldap } } protocol smtp { passdb { args = /etc/dovecot/dovecot-ldap-smsp.conf.ext driver = ldap } } dovecot complains: dovecot: auth: Fatal: No passdbs specified in configuration file. PLAIN mechanism needs one which is a little confusing, since there are multiple passdbs specified, in the various protocol sections. i found that adding another "global" passdb to the config allows dovecot to work - e.g.: # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 3.0.0-15-generic-pae i686 Ubuntu 11.10 auth_debug = yes first_valid_gid = 2000 first_valid_uid = 2000 log_timestamp = "%d.%m.%Y %H.%M.%S " login_greeting = dovecot ready mail_debug = yes passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocols = " imap lmtp" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } service lmtp { inet_listener lmtp { address = 127.0.0.1 ::1 port = 10026 } } ssl_cert = </etc/dovecot/pki/mra.example.com-cert.pem ssl_key = </etc/dovecot/pki/mra.example.com-key.pem verbose_proctitle = yes protocol imap { mail_max_userip_connections = 20 passdb { args = /etc/dovecot/dovecot-ldap-imap.conf.ext driver = ldap } userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap-imap.conf.ext driver = ldap } } protocol lmtp { userdb { args = /etc/dovecot/dovecot-ldap-lmtp.conf.ext driver = ldap } } protocol smtp { passdb { args = /etc/dovecot/dovecot-ldap-smsp.conf.ext driver = ldap } } the problem with this is that while each of the passdb/userdb configs for the various protocols does indeed work, if a result is not found in one of them, the global passdb appears to then function as a catch-all. how can i tell dovecot it doesn't need a global passdb? each of the protocols' passdb/userdb configs is functioning as desired, but having dovecot look elsewhere upon failure ends up defeating the purpose. thanks -ben

2 2

[Dovecot] invalid mailbox name
by Vincent Schut 13 Mar '12

13 Mar '12

Hi, while migrating all mail from our old to our new server (using offlineimap, imap -> imap), I get the following error for one of my user's mailboxes: ERROR: Folder 'Organisations.RS Env & IJRS'[local_hoekman] could not be created. Server responded: ('NO', ['Invalid mailbox name: Organisations.RS Env & IJRS']) I suppose this is because of the ampersand in the mailbox name? Because other folder with spaces in it go just fine... Is this a fixed thing? Why was my user able to create the folder once? And why is dovecot 1.2.15 refusing to create the folder now? Migration is from dovecot 1.1.11 to 1.2.15. Thanks, Vincent.

2 5

[Dovecot] upgrade convert omissions
by Nick Edwards 13 Mar '12

13 Mar '12

It did not convert over some things: protocol imap { listen = *:143 mail_plugins = quota imap_quota imap_client_workarounds = outlook-idle ssl_listen = *:993 } protocol pop3 { pop3_uidl_format = %f mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { mail_plugins = quota cmusieve quota_full_tempfail = no log_path = /var/log/dovecot/deliver.log deliver_log_format = msgid=%m: from=%f: %$ auth_socket_path = /var/run/dovecot/auth-master } I ended up with service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_limit = 1024 service_count = 1 } service imap { process_limit = 1024 } service pop3-login { process_limit = 1024 service_count = 1 } service pop3 { process_limit = 1024 } It looks like service-foobar is replacing stuff inside protocol {} but protocol still exists in examples, kind of confusing. Oh what about service-pop3, different than examples and service-imap, where's pop3s ? I guess I'll just copy the service pop3 section from an example file. Does all this mean the protocol section is not needed? or everything inside of them I had is no longer valid? No LDA specific logging converted, it did not include the quota stuff in where it is needed (mail_plugins went MIA), but did inside converted plugin section. I did note the conversion warned that workarounds = outlook-idle is no longer needed, but nothing about the other stuff. Just concerns me if it ignored some needed stuff, what else did it ignore. Nik (who is rather reluctant to use series 2 and break everything and stay with 1.2) Below is the new conf file: auth_cache_negative_ttl = 0 auth_cache_ttl = 5 mins auth_mechanisms = plain login auth_verbose = yes disable_plaintext_auth = no first_valid_uid = 95 last_valid_uid = 95 listen = *,:: log_path = /var/log/dovecot/pop3.log login_log_format_elements = user=<%u> method=%m rip=%r %c mail_location = maildir:/vmail/%d/%n/Maildir mail_nfs_index = yes mail_nfs_storage = yes maildir_very_dirty_syncs = yes mmap_disable = yes passdb { args = /etc/dovecot-sql.conf driver = sql } plugin { quota = maildir quota_rule = *:storage=1000M quota_rule2 = Trash:storage=100M quota_rule3 = Junk:ignore quota_rule4 = Spam:ignore quota_warning = storage=90%% /usr/local/bin/quotawarn-90.sh quota_warning2 = storage=75%% /usr/local/bin/quotawarn-75.sh } pop3_lock_session = yes protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 user = vmail } user = vmail } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_limit = 1024 service_count = 1 } service imap { process_limit = 1024 } service pop3-login { process_limit = 1024 service_count = 1 } service pop3 { process_limit = 1024 } shutdown_clients = no ssl_cert = </etc/ssl/certs/mail.crt ssl_key = </etc/ssl/certs/mail.key userdb { args = /etc/dovecot-sql.conf driver = sql }

2 2

[Dovecot] Trouble adding sasl support via dovecot
by Richard Troy 12 Mar '12

12 Mar '12

Hello Folks, I've been the admin of a site that uses Postfix with Dovecot on RedHat since, oh, gosh, maybe 1996? It's been a long time. I've never built it from source, though, just used the rpms (and I wonder if maybe that's my problem now). It just works, is reliable, and lets me be a very-part-time administrator. Repeatedly over the last few years I've been asked to have our mail system "join the modern age" and provide mail sending capabilities for clients that aren't on our internal network - via their smart-phones, from home, etc. OK... Well, way back when the site was set up, smtp servers didn't do any kind of "auth", but along the way to solving this problem (trying to configure pop-before-smtp, someone mentioned that Postfix now has an auth mechanism that uses Dovecot and I should use that instead! Great! ... Except that I've spent between 16 and 20 hours on this with no joy, and while I hate having to ask for help, it's time to ask what things that are obvious to the less ignorant that I must be doing wrong... Certainly, given the solid history of Postfix and Dovecot, I must be the problem! My problem statement is simply, "it should be working", but doesn't, and I don't get any announcement of "auth" when testing connections to Postfix as per directions here: http://www.postfix.org/SASL_README.html#server_test At least I haven't broken the normal functionality! I'm building a new server on the latest Fedora Core (16), but it's lacking in some hardware and won't be ready for a while, so I'm working with FC 14, running Postfix 2.5.6, and Dovecot 1.2.8. It uses the "cram-md5" auth scheme (which works fine and I'd hate to change it if I don't have to). The system has been up and functional on these versions for a couple of years, and quite stable, we just can't send if we're not local. When I do "postconf-a" it indicates cyrus and dovecot, so I take it that means Postfix has been built with sasl support. (I presume this means I don't have to compile it from source.) First Dovecot. Its set up to provide all protocols, but only imaps and pop3s have ports forwarded through the firewall. Plain-text auth is disabled, ssl is set to yes, ssl_listen is not specified, and the cert and key files are in the default locations - and work. No cipher list is used. Dovecot's chrooted. The protocol sections imap and pop3 take ALL the defaults, as does lda (I've ignored sendmail_path = /usr/lib/sendmail) as I don't think it matters. "auth default {" has mechanisms set to cram-md5, digest-md5, plain, and login, with passdb passwd-file pointing to a file in /etc where the cram data goes. It's not using pam, and there's an OLD comment in the config: # Experience says we need an empty passdb - passwd group: which is followed by passdb passwd{}. Later, there's "userdb passwd {}. All of that was configured long ago and has been functional. The changes I've made to add sasl support primarily pertain to the "socket listen section of "auth default". There, the master section remains commented out while the client section has been uncommented, the path set to /var/spool/postfix/private/auth, mode set to 0660, and the user and group have been set to postfix. ...This is all as described here: http://www.postfix.org/SASL_README.html and http://wiki.dovecot.org/HowTo/PostfixAndDovecotSASL That's it for Dovecot. Now, to Postfix itself. >From the working environ, only listening on port 25, I simply added the following (as per directions already cited above): smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_security_options = noanonymous, noplaintext smtp_sasl_security_options = noanonymous, noplaintext smtpd_sasl_tls_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous And, of course, permit_sasl_authenticated was added to smtpd_recipient_restrictions. I got the impression from the baove sources that Postfix will then use Dovecot's authentication mechanism via a socket it finds in its private/auth subdirectory. NOT documented in any of those places, someone suggested I must turn on TLS. OK... The documentation found here: http://www.postfix.org/TLS_README.html claims (intimates) that it's not possible to run a site on a self-signed certificate, however, there's ZERO budget for a signed certificate, so unless I can get one for ten bucks somewhere, that could be a deal-breaker here. However, we've been using self-signed certificates for a while now and wonder why an "exception" mechanism wouldn't exist. As that web page talks about "Netscape" I suspect it's very old and may no longer apply. In any event, I tried this, too (after trying without). On the good side, an available Android phone, previously reading fine, but unable to send, no longer complained when the setup was changed to the imap username and password, same server address, TLS security type, and the server port of 25. HOWEVER, no mail has passed through it successfully, it just gives no error whatsoever, so far, while the server's log reports "Relay access denied." Notably, when setting up TLS, Postfix complained when the smtpd_tls_key_file was incorrect, but did not complain when it was provided properly, suggesting it's reading and accepting my self-signed certificate and private key. Ideas, please?! And, by the way, what's port 465 all about? Some clients propose that's what should be used to send... Thanks in advance for your help, Richard

2 2

[Dovecot] mdbox + gzip and rsync
by Jean-Daniel Beaubien 12 Mar '12

12 Mar '12

Hi, After reading the following paragraph from the dovecot doc, I've been wondering how it would affect rsync (when combined with gzip): "Expunging a message only decreases the message's refcount. The space is later freed in "purge" step. This is typically done in a nightly cronjob when there's less disk I/O activity. The purging first finds all files that have refcount=0 mails. Then it goes through each file and copies the refcount>0 mails to other mdbox files (to the same files as where newly saved messages would also go), updates the map index and finally deletes the original file. So there is never any overwriting or file truncation." How will the mailbox files (m.X) files be modified when I move or delete emails using mdbox+gzip. Will the resulting gzipped mdbox files be rsync-able or will they need a full re-upload? If I plan on using rsync for backups, am I better off not using the gzip feature (if i can spare the extra storage)??? Thanks, -JD

3 3

[Dovecot] dot named folders
by Micah Anderson 12 Mar '12

12 Mar '12

When a user makes a folder called 'x.y' it actually creates a folder called 'x' with a folder called 'y' inside, rather than a folder called 'x.y'. I'm guessing this has to do with an internal folder separator namespace configuration, but I'm a bit confused by how this works. I'm using 2.0.15 with mdbox and this is what I have configured for my namespaces: namespace { separator = . prefix = inbox = yes } namespace { separator = . prefix = INBOX. inbox = no hidden = yes list = no } I migrated from courier maildirs, so perhaps I no longer need some of these now that the conversion is finished? thanks for any suggestions, I've got my head mixed up on this issue, micah --

4 5

[Dovecot] Extracting mbox format from Dovecot IMAP (mdbox)
by Giles Coochey 12 Mar '12

12 Mar '12

Hi, I'm looking for a quick tool that can connect to my IMAP account grab all the messages in a particular folder and dump them to a mbox format file? Anyone know a quick easy tool to do that? This is a spam folder that I'd like to do some Bayes spam learning on, but since I've migrated to mdbox I don't think I can do this directly on the mailbox. Any thoughts appreciated. -- Best Regards, Giles Coochey NetSecSpec Ltd UK Mobile: +44 7983 877 438 Business Email: giles.coochey(a)netsecspec.co.uk Email/MSN/Live Messenger: giles(a)coochey.net Skype: gilescoochey

2 4

Re: [Dovecot] Question about folder creation/delete and logging
by Maria Arrea 12 Mar '12

12 Mar '12

mail_log plugin is just what we need, thank you for your support. Yes, we are using bacula+doveadm import for this project. If you are interested, we have in production an home-brew message-tracking system for our end-users. We parse qmail / postfix / clamav / spamassassin/ dovecot / sieve logs and insert them in a mysql database, and a logged user in our webapp can see what happened with her mails (sent mails or messages waiting for arrival). Affero GPL software, of course. Some screenshots (Spanish only, sorry) here: https://gestionproyectos.us.es/attachments/download/321/Seguimiento_de_mens… https://gestionproyectos.us.es/attachments/download/145/Captura_de_pantalla… https://gestionproyectos.us.es/attachments/download/156/Seguimiento_de_mens… URL of the project (Seguimiento, spanish word for "tracking"): https://gestionproyectos.us.es/projects/seguimiento Regards Maria ----- Original Message ----- From: Timo Sirainen Sent: 03/12/12 02:04 PM To: Maria Arrea Subject: Re: [Dovecot] Question about folder creation/delete and logging On Mon, 2012-03-12 at 12:56 +0100, Maria Arrea wrote: > > - Is there any way of Dovecot logging to write when a folder is > deleted or created? We do not want to increase too much our "normal" > logging level. We use Dovecot 2.0.18+mdbox+zlib You can configure mail_log plugin to only log mailbox creations and deletions. http://wiki2.dovecot.org/Plugins/MailLog > - Does anybody know of any other project to create an easy-restore > for Dovecot? I guess you're using "doveadm import"? So other than that, haven't heard of any.

1 0

[Dovecot] Question about folder creation/delete and logging
by Maria Arrea 12 Mar '12

12 Mar '12

Hello We are working in a web based restore system for our Dovecot users. In this web form a user must log-in and after successful login can estore a deleted folder from date X. We will release it under the GPL. I have a couple of questions: - Is there any way of Dovecot logging to write when a folder is deleted or created? We do not want to increase too much our "normal" logging level. We use Dovecot 2.0.18+mdbox+zlib - Does anybody know of any other project to create an easy-restore for Dovecot? Regards Maria

3 2

[Dovecot] Dovecot LDA breaking .qmail forwarding?
by Wouter van der Schagt 12 Mar '12

12 Mar '12

Good morning all, I've a problem, I'm using the Dovecot LDA in my .qmail file: |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/deliver -d $EXT@$USER However when I add a forward, such as: |/var/qmail/bin/preline -f /usr/local/libexec/dovecot/deliver -d $EXT@$USER <mailto:&wouter@vdschagt.com> &wouter(a)vdschagt.com The mail isn't forwarded and stays in the queue on the mail server, the same is the case when I reverse the lines. The error in the log file is: @400000004f5de5f7033bc434 delivery 824026: deferral: qmail-inject:_fatal:_qq_trouble_creating_files_in_queue_(#4.3.0)/system_erro r_calling_qmail-inject/ When using another LDA, for example when specifying the Maildir, it works, but then i cannot use Sieve scripts. Any ideas? Am I doing anything wrong? Sincerely, - Wouter van der Schagt

1 0

[Dovecot] nfs error fcntl(read-lock) locking failed for file
by Rajesh M 10 Mar '12

10 Mar '12

hi i am using qmailtoaster with dovecot version 2 mailbox format is maildir i have a domain with around 5000 users which are distributed over 2 servers webmail (squirrelmail) runs using dovecot v2 is being used from server number one server number 2 had all the data stored in it and also has pop and smtp running from it. i am not using dovecot for pop as yet on the server with dovecot i get such errors in the log file access to data on server number 2 is via nfs on server number 1 i get errors as such Error: fcntl(read-lock) locking failed for file Input/output error squirrelmail gives error imap connection closed and i am not able to login so i set the parameters as such in the dovecot conf file and the error stopped mmap_disable=yes dotlock_use_excl = yes lock_method = dotlock can somebody please advise me if the above is correct ? or is it preferred to use fcntl with lockd (note that my mailbox is maildir format) thanks very much for your help rajesh

2 1

[Dovecot] Lock down Shared Mail Accounts?
by Charles Marcus 10 Mar '12

10 Mar '12

On 3/5/2012 1:30 PM, Steve Campbell wrote: > I've been looking at some documentation on shared mail accounts. > But I'm getting mixed thoughts on how this can or should be done. This brings up a question I have been meaning to ask. One thing I want to do on my new converted system is to implement shared mail. There will be two different scenarios - users sharing 'folders', which looks to be fairly simple using virtual ACL files - but for the other scenario, I'm not sure about a specific requirement we will have... I want to give multiple people shared access to some actual accounts with all of the special use folders, with the following requirements: 1. They can all read/reply to new messages as they come in, 2. They use shared \seen, \replied and \forwarded flags, so once someone else has read/dealt with a message, the others see that, 3. When they reply to/forward a message, the Sent message gets saved to that accounts 'Sent' folder, 4. They can *move* messages to other folders in that account (ie, 'file' them), and last (this is the tricky part) 5. No one other than a designated user or users (Master User(s)? Users in a specified Group?) can delete any messages in this account, in any of the folders. These emails deal with financial transactions (AP and AR issues) and Faxes, thus the requirement to not be able to delete them. Can this be accomplished with the current state of things? Or would this require some coding? If the latter, could it be done as a plug-in, or would it require changes to the core code? Thanks, -- Best regards, Charles

4 5

Re: [Dovecot] dovecot Digest, Vol 107, Issue 20 Fscking warnings
by Stephen Davies 10 Mar '12

10 Mar '12

Yes that is the google thread that I saw. I don't see the relevance of your reference to dsync. As I read the man pages for dsync it is used to sync separate servers, to make backups or to convert mailbox formats. When I upgraded from 1.2.15 to 2.1.1 I saw nothing in the doco to suggest that dsync was relevant to my scenario. In a previous thread here (Log sync errors), Timo suggested that the migration fix was to delete all .imap directories. My understanding was that this should fix any differences between 1.2.15 files and 2.1.1. If that were the case, mentioning the migration again would seem irrelevant. However, it seems that deleting the .imap files did not fix the log sync errors or the fscking warnings. Both are still happening continuously. Cheers, Stephen On Thu, 8 Mar 2012 08:26:55 PM dovecot-request(a)dovecot.org wrote: > Date: Wed, 07 Mar 2012 15:03:35 -0600 > From: Stan Hoeppner <stan(a)hardwarefreak.com> > To: dovecot(a)dovecot.org > Subject: Re: [Dovecot] Fscking warnings > Message-ID: <4F57CD27.3000207(a)hardwarefreak.com> > Content-Type: text/plain; charset=ISO-8859-1 > > On 3/6/2012 5:07 PM, Stephen Davies wrote: > > Google tells me that these "should go away" but they don't. > > > > > > > > Seems to happen continuously while a user is viewing email. > > Is this thread what "Google tells you"? > > http://dovecot.org/list/dovecot/2010-October/053909.html > > Timo is the creator of Dovecot, if you didn't know. So you can take his > words for gospel. Also note his last statement in that thread: > > "The next time you could do it with dsync to avoid these kind of > problems." > > It would seem you omitted a very important detail from your problem > report, which is that you recently performed a migration. Please don't > omit such critical details in future requests for help. Provide as much > relevant detail as possible. This speeds the process up for everyone, > and avoids guesswork on our part. > > -- > Stan > > > ------------------------------ > > Message: 10 > Date: Thu, 8 Mar 2012 00:26:55 +0100 > From: "Marc" <M.Roos(a)roosit.eu> > To: <dovecot(a)dovecot.org> > Subject: [Dovecot] FW: Centos 6 + dovecot 2 + mail.app + imap -- ============================================================================= Stephen Davies Consulting P/L Voice: 08-8177 1595 Adelaide, South Australia. Fax : 08-8177 0133 Records & Collections Management. Mobile:040 304 0583

2 1

[Dovecot] POP3C storage backend
by Tom Talpey 10 Mar '12

10 Mar '12

I see a new "POP3C" lib-storage client backend in dovecot 2.1, but I don't see anything in the 2.1 doc directory or in the wiki. Can this be used to synchronize dovecot with external pop servers? Doing away with my current fetchmail and lmtp solution for this would be quite interesting. Thanks for any pointers to configuring and using this, if so...

2 1

[Dovecot] Fscking warnings
by Stephen Davies 10 Mar '12

10 Mar '12

Google tells me that these "should go away" but they don't. Seems to happen continuously while a user is viewing email. Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Archive/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Davies/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/FieldNET/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Invoices Out/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Lawrence and Hanson/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Logger Call/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Logger Reset/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/River Murray/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/SMS Emails/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Soil Moisture Alert/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Water Management Alarm/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Water Usage/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Weather Summaries/dovecot.index Mar 7 09:29:52 server dovecot: imap(john): Warning: fscking index file /home/john/Mail/INBOX/.imap/Zerna/dovecot.index -- ============================================================================= Stephen Davies Consulting P/L Voice: 08-8177 1595 Adelaide, South Australia. Fax : 08-8177 0133 Records & Collections Management. Mobile:040 304 0583

3 2

[Dovecot] Single instance storage
by Jean-Daniel Beaubien 10 Mar '12

10 Mar '12

I have read most of the doc on the dovecot website, and couldn't find any info on the single instance storage feature, so I'm posting my questions here. - Are these 3 parameters the only one necessary for single instance storage? I cannot find any doc on this feature on the website; is there anything specific I need to know about them? (the last one isn't exactly self-explanatory). - mail_attachment_dir = /srv/vmail/attachments - mail_attachment_hash = %{sha256} - mail_cache_min_mail_count = 2 - Is this feature ready for production? Thanks, -JD

2 1

[Dovecot] migrating/converting from system users -> virtual users
by Steve Platt 10 Mar '12

10 Mar '12

Hello all, We currently have a traditional mail server where all users have system accounts (ie entries in the NIS passwd map) and mbox-format mail folders in their (system) home directories. I'm trying to setup a dovecot server in which we want all users to have "virtual" accounts (in dovecot) and no entry in the passwd file at all (ie no access to the mail server). This is for security reasons, we want to imagine that users connecting to the mail server in future will not be able to access any resources on the server other than access their email messages. To this end we've set up a "vmail" user that owns all the messages in the Maildir directories. Most of this is working but I'm stuck on how to convert users' mail folders from the existing setup to the new one. I'm using the convert plugin but of course the problem is that the plugin executes as the "vmail" user and cannot access the existing mail folders that belong to the users: and I'd be worried if it could, of course! So I've converted a few users already by making copies of their old-world mailboxes, changing the ownership of the copies and pointing the convert plugin to these copies, instead of the originals. This works (modulo the dreaded "timeouted" error messages) but is very ugly. So I tried looking at the convert-tool but can't find a man page for it so am not sure what I'm doing with it! I have the idea that I should be able to run some command (as a privileged user) on the mail server and have it do the conversion for me, changing the ownership/permissions on the way. Can convert-tool do this? I'd prefer to go with the automatic (plugin) conversion if I can bodge the ownership issues somehow. Failing that, some tool or script may be the next best answer. This is Dovecot 1.2 by the way on Solaris 10. Any suggestions would be welcome! Steve Platt

2 3

[Dovecot] Whether the THREAD command support cross-mailbox thread?
by Andy YB Hu 10 Mar '12

10 Mar '12

In the real world, the mails which belongs to one thread could be dispersed in different mailbox, at least Inbox and SENT, so whether the command can search different mailboxes and grap them in one talk with dovecot? If Not, any other approach to do that? BTW, what the THREAD=REFS stands for? In the RFC, http://tools.ietf.org/html/rfc5256, i didn't find this algorithm.

2 1

[Dovecot] Advise on upgrading from a jurassic version - please help.
by Martin Mielke 10 Mar '12

10 Mar '12

Hi all, I have inherited an old Dovecot installation which is causing headaches almost every day. I know that one of the rules says "Don't bother asking questions about v0.99.x versions. They're no longer supported."...but please bear with me, this will be quick as I only need some advise from experienced Dovecot gurus out there. I have read the Dovecot documentation and there are instructions to upgrade from 0.99.x to 1.x and so on... my question is: can I upgrade from 0.99.11 to 2.x directly or is it a massive leap? If so, what do I have to keep in mind? This is a production system so I should not break anything... or at least have a rollback plan... Thanks a lot in advance! Regards, Martin

2 1

[Dovecot] sieve and utf-7 foldernames
by Andreas Schulze 10 Mar '12

10 Mar '12

Hi all, since many dovecot/pigeonhole versions I have an error: Mails are delivered into wrong folders if the foldername contain a german umlaut. ( ä, ö, ü ) setup: dovecot-2.1.1 / pigeonhole-0.3.0 postfix deliver to dovecot-lda .dovecot.sieve contains this: require ["fileinto","reject","vacation","relational","comparator-i;ascii-numeric","regex"]; if header :contains "To" "green(a)example.org" { fileinto "INBOX.gr&APw-n"; stop; } a mail to the mentioned address produces this logging: Mar 9 22:23:10 test dovecot: lda(foo): save: box=INBOX.gr&APw-n, uid=2, msgid=<4711(a)example.org>, size=4642 also a mail_debug=yes log no more lines related to the foldername but at the end I found the mail not in the expected folder. It places in "INBOX.gr&-APw-n" notice the extra minus after & I think it's pigeonholes fault but I may be wrong ... # doveconf -n # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.9 ext3 ... lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = 127.0.0.1, ::1 protocols = " imap sieve" protocol lda { mail_plugins = quota notify mail_log sieve } ... Andreas

2 1

[Dovecot] Has dovecot 2.1.1 been built and tested on AIX 6.1???
by Bennett, Tony 09 Mar '12

09 Mar '12

I have downloaded and built dovecot 2.1.1 using gcc on AIX 6.1. (The output of "dovecot -n" is at the bottom of this email.) I'm trying "baby steps" to get it up, before I give it the final configuration. (My apologies: I was pointed to RFC3501 and told to get an IMAP server, build it, configure it, and bring it up) What is currently occurring when I start dovecot is: Error: service(pop3-login): listen(::, 110) failed: Address already in use Error: service(pop3-login): listen(::, 995) failed: Address already in use Error: service(imap-login): listen(::, 143) failed: Address already in use Error: service(imap-login): listen(::, 993) failed: Address already in use Fatal: Failed to start listeners Using TRUSS and recompiling with log messages I've determined that dovecot is successfully creating and binding to AF_INET sockets... but is failing when trying to do the "bind" the same port to an AF_INET6 socket. The failure is "EADDRINUSE". The logic in the dovecot sources seems driven off of the define of HAVE_IPV6 (defined in config.h by configure) So, the questions I have are: - Is this the correct behavior - If this is the correct behavior, has this been tested against AIX 6.1, and if so, does anyone have an idea of what I did wrong...??? If it has not been tested against AIX 6.1 and is NOT the correct behavior, should I just change "config.h", and undefined HAVE_IPV6 ... or is there a better way to move beyond this issue... (like a change to "configure")??? Thanks, -tony Here is the output of "dovecot -n": # 2.1.1: /attic/usr/local/etc/dovecot/dovecot.conf # OS: AIX 1 00C30F654C00 default_login_user = dovecot disable_plaintext_auth = no namespace { inbox = yes location = mailbox { special_use = \Drafts name = Drafts } mailbox { special_use = \Junk name = Junk } mailbox { special_use = \Sent name = Sent } mailbox { special_use = \Sent name = Sent Messages } mailbox { special_use = \Trash name = Trash } prefix = name = inbox } passdb { args = scheme=CRYPT username_format=%u /attic/usr/local/etc/dovecot/users driver = passwd-file } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%u /attic/usr/local/etc/dovecot/users driver = passwd-file } protocol lmtp { service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } } protocol lda { service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } } protocol pop3 { service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } } protocol imap { service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } }

2 2

Re: [Dovecot] disabling SSLv2 in dovecot 1.2.17
by Steve Platt 09 Mar '12

09 Mar '12

Hi Mark, I think I may not have been clear enough in my query, sorry! What I'm trying to do is to prevent SSLv2 connections being made to our IMAP server while allowing SSLv3 and TLSv1 connections. I think I've prevented the use of SSLv2 ciphers but this does not prevent SSLv2 protocol connections (as far as I can tell). (Once connected, the SSLv2 client finds it has no ciphers so the session fails at that point but this is not enough to satisfy our security audit. I want to disable the use of the SSLv2 protocol itself, not just the SSLv2 ciphers) steve.platt(a)mrc-bsu.cam.ac.uk said: > I see Dovecot2 had the following change a year or so ago, in file src/ > login-common/ssl-proxy-openssl.c: > > - SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL); > + SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL | SSL_OP_NO_SSLv2); > > I tried making the same change to dovecot1's src tree on our test system and > it seems to have the desired effect ... I'm testing this by using: openssl s_client -ssl2 -connect mailhost:993 This should fail immediately with "ssl handshake failure" (for a happy audit!). Thanks again, Steve

1 0

[Dovecot] seeking advice: dovecot versions; mailbox formats.
by Vincent Schut 09 Mar '12

09 Mar '12

Hi, I'm currently migrating our old (colocated) mail server (running a [terribly outdated, I know] dovecot 1.1.11) to a new VPS (virtual private server). The old server was running gentoo linux (which is mainly the culprit of the old dovecot version: gentoo was too much trouble to keep updating); the new server will run debian (stable: 6). Debian currently has dovecot 1.2.15 in its repositories; not that much newer... I read in the docs about the auto-generated-from-hg debian dovecot packages for 2.0, 2.1 and 2.2. Which leaves me to the choice what version to use... OK, 2.2 is development, which leaves the choice to: 1.2.15; 2.0.x, or 2.1.x. I would appreciate any consideration or thoughts on what version to choose. On a related note, there is the possibility to switch from maildir to dbox. I did not really find much pros or cons, except from performance and standards-compliance (ability to use e.g. mutt on the server itself). Any thoughts? About the server: we're just a small company. Think about 15 accounts, normal mail traffic, sometimes relatively large attachments (20mb+). Some accounts have many folders; some accounts are very large (5Gb+). Storage is on ext3, raid10. Performance has never been an issue; reliability and ease of maintenance is more important. Thanks, Vincent Schut.

5 7

[Dovecot] disabling SSLv2 in dovecot 1.2.17
by Steve Platt 09 Mar '12

09 Mar '12

I've set up a list of ciphers that excludes SSLv2 ciphers (and other weak ones) in the hope of preventing SSLv2 connections: ssl_cipher_list = TLSv1+HIGH : !SSLv2 : RC4+MEDIUM : !aNULL : !eNULL : !3DES : @STRENGTH However, this doesn't prevent the SSLv2 connection being allowed as our Nessus scans show and I'm tasked with trying to plug that "hole". I see Dovecot2 had the following change a year or so ago, in file src/login-common/ssl-proxy-openssl.c: - SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL); + SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL | SSL_OP_NO_SSLv2); I tried making the same change to dovecot1's src tree on our test system and it seems to have the desired effect; however I am very hesitant about putting this into our production system without seeking advice here first :-) Have I missed anything that's obviously bad about doing this please? Thanks again, Steve Platt

2 1

[Dovecot] [PATCH] Pop3 order in courier migration script
by Christoph Bußenius 08 Mar '12

08 Mar '12

Hi, I found a problem in the courier conversion script (courier-dovecot-migrate.pl). In some cases, it does not correctly preserve the order of POP3 UIDLs. Consider the following case, when courierpop3dsizelist contains: /2 9000 1327481629 AAA1:2,S 10000 21:1327481629 AAA2:2,S 10000 22:1327481629 AAA3:2,S 10000 23:1327481629 AAA4:2,S 10000 24:1327481629 AAA5:2,S 10000 25:1327481629 BBB11:2,S 10000 11:1327481629 BBB12:2,S 10000 12:1327481629 BBB13:2,S 10000 13:1327481629 BBB14:2,S 10000 14:1327481629 BBB15:2,S 10000 15:1327481629 and courierimapuiddb contains: 1 1327480919 9000 11 BBB11 12 BBB12 13 BBB13 14 BBB14 15 BBB15 16 CCC16 17 CCC17 18 CCC18 19 CCC19 20 CCC20 21 AAA1 22 AAA2 23 AAA3 24 AAA4 25 AAA5 then call courier-dovecot-migrate.pl --to-dovecot --convert and it will create dovecot-uidlist: 3 V1327480919 N9010 21 PUID21-1327481629 W10000 :AAA1:2,S 22 PUID22-1327481629 W10000 :AAA2:2,S 23 PUID23-1327481629 W10000 :AAA3:2,S 24 PUID24-1327481629 W10000 :AAA4:2,S 25 PUID25-1327481629 W10000 :AAA5:2,S 9000 :CCC17 9001 PUID12-1327481629 W10000 :BBB12:2,S 9002 :CCC16 9003 PUID15-1327481629 W10000 :BBB15:2,S 9004 :CCC20 9005 PUID14-1327481629 W10000 :BBB14:2,S 9006 PUID13-1327481629 W10000 :BBB13:2,S 9007 :CCC18 9008 PUID11-1327481629 W10000 :BBB11:2,S 9009 :CCC19 The problem here is that the BBB files are not in the same order as in courierpop3dsizelist, and will therefore have a different order in the UIDL response in POP3. Also, the CCC files are interleaved while they should appear at the end. The reason is how the script assigns new UIDs: It does not do this in the order of courierpop3dsizelist. In fact the order is random because it depends on how perl traverses hashes. The attached patch fixes this by sorting the messages: First the POP3 messages get their new UIDs in order of their appearance in courierpop3dsizelist (so that the UIDL order will really be the same as in Courier), after that, the IMAP-only messages will be checked for UID clashes. The patch also changes how the $prev_uid variable is handled because that was also needed to always get the order right. The algorithm could probably be optimized to reduce the number of UID re-assignments to a minimum, however this would complicate the code and would only be noticed in a few cases. The patched courier-dovecot-migrate.pl will create dovecot-uidlist like this: 3 V1327480919 N9010 21 PUID21-1327481629 W10000 :AAA1:2,S 22 PUID22-1327481629 W10000 :AAA2:2,S 23 PUID23-1327481629 W10000 :AAA3:2,S 24 PUID24-1327481629 W10000 :AAA4:2,S 25 PUID25-1327481629 W10000 :AAA5:2,S 9000 PUID11-1327481629 W10000 :BBB11:2,S 9001 PUID12-1327481629 W10000 :BBB12:2,S 9002 PUID13-1327481629 W10000 :BBB13:2,S 9003 PUID14-1327481629 W10000 :BBB14:2,S 9004 PUID15-1327481629 W10000 :BBB15:2,S 9005 :CCC16 9006 :CCC17 9007 :CCC18 9008 :CCC19 9009 :CCC20 Cheers, Christoph -- Christoph Bußenius Rechnerbetriebsgruppe der Fakultäten Informatik und Mathematik Technische Universität München +49 89-289-18519 <> Raum 00.05.055 <> Boltzmannstr. 3 <> Garching

2 3

[Dovecot] v2.1 latest hg: untagged reply to namespace command
by e-frog 08 Mar '12

08 Mar '12

Hello Timo, There seems to be something broken in v2.1 latest hg version: # 2.1.1 (94de7605f50f) 1 namespace * NAMESPACE (("" "/")("virtual/" "/")) NIL NIL * OK Namespace completed. Please note that the "OK Namespace completed." is send untagged. It worked on below version: # 2.1.1 (315f0d8cc2b2) 1 namespace * NAMESPACE (("" "/")("virtual/" "/")) NIL NIL 1 OK Namespace completed. Thanks, e-frog

1 1

[Dovecot] Shared mboxes
by Steve Campbell 08 Mar '12

08 Mar '12

I've been looking at some documentation on shared mail accounts. But I'm getting mixed thoughts on how this can or should be done. I use mbox for all my pop and imap folders since I've converted from a uw-imap server. The first thing that makes me wonder about setup is that I've been told to not use maildir and mbox on the same machine, although I'm not really sure why since it seems this would work OK, but anyway, I'm guessing I should stick with mbox for the shared accounts. Secondly, I'm sure I'd need a namespace to use which ever format, so there's private, public, and shared types. Most of the stuff I'm reading seems to suggest "public" as a type instead of "shared". So what's shared for anyway? I want to use this shared account so that email can be sent to this account, and be shared by only a few people, but I'm reading where locks and such don't work with mbox, so in my mind, how do you avoid corruption and why not just make a normal account and let people hack away at the data? I've not even got to the questions in my mind about how to set up the account, but figured if I could get the above straight, I might be able to fuddle my way through it. Help would be truly appreciated. steve campbell

2 6

Re: [Dovecot] dsync replication available for testing
by Michael Grimm 08 Mar '12

08 Mar '12

Hi -- On 08.03.2012 12:35, Timo Sirainen wrote: > On Thu, 2012-03-08 at 11:26 +0100, Michael Grimm wrote: > You can do for example: > > service config { > unix_listener config { > user = vmail > } > } I will try that later. >> It seems to me, that whenever a larger number of mails arrive on >> both >> servers simultaneously, the replicator gets into trouble [1]. I am >> unsure if one can expect that a replicator should deal with such >> stress, >> though. Or? > > Were these mails delivered via LMTP or dovecot-lda? LMTP > The locks should prevent duplicates I think, so there's something > still > going wrong. Just to be sure that I didn't misunderstand your proposed configuration: @mx1: plugin { mail_replica = remote:vmail@mx2.example.tld } @mx2: plugin { mail_replica = remote:vmail@mx1.example.tld } I do need to define one mail_replica plugin at each server pointing to the other one, correct? Regards, Michael

1 0

[Dovecot] duplicates with multiple To/CC and sieve redirect copy
by Adam Szpakowski 08 Mar '12

08 Mar '12

Hi, In one installation we are using sieve "redirect :copy" to create copy of the incoming email (local boss gets copy of its employees mails). There is a problem when the incoming email has multiple To/CC entries with local users. Multiple copy/redirects are created (one for each employee) and there are multiple copies in "boss" account. Each of this emails has the same Message-ID. Is there a way to detect those duplicates and discard them when saving copies into boss account? There was a discussion on the list a while ago (Feb 10/11, 2011) mentioning this problem, but with no clear solution. We are using Dovecot 2.0.15. Mail is delivered via LMTP (MDA/postfix is on separate machine then MAA/dovecot). -- Adam Szpakowski

5 10

[Dovecot] Failing: doveadm sync <--remote host--> dsync mirror
by Michael Grimm 08 Mar '12

08 Mar '12

Hi -- I'm used to dsync my two mailservers running 2.0.16. Today, I did upgrade one server to 2.1, and doveadm sync is throwing to following error: mail> doveadm sync -f -u test ssh vmail(a)remote-host.tld dsync -v -f -u test doveadm(test): Fatal: All your namespaces have a location setting. It should be empty (default mail_location) in the namespace to be converted. Same error with old running command: vmail> dsync -v -f -u test mirror ssh vmail(a)remote-host.tld dsync -v -f -u test doveadm(test): Fatal: All your namespaces have a location setting. It should be empty (default mail_location) in the namespace to be converted. Here's an excerpt of my doveconf -n: mail> doveconf -n mail_home = /var/mail/homedirs/%n mail_location = mdbox:/var/mail/maildirs/%n passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } Reverted back for the time being (production servers) until I do understand the issue. Searching Google with "Fatal: All your namespaces have a location setting." only shows closed bugs back in 2010. Do I have to upgrade both servers to get syncing running? Any hint, help is highly appreciated. Thanks, Michael

2 18

[Dovecot] FW: Centos 6 + dovecot 2 + mail.app + imap
by Marc 08 Mar '12

08 Mar '12

Anybody also experiencing that imap processes are kept running/open by mac osx mail.app, so eventually users are getting to the mail_max_userip_connections limit? Outlook / other clients seem to run fine. Thanks, Marc

1 0

[Dovecot] http://xi.rename-it.nl down?
by Jim Knuth 07 Mar '12

07 Mar '12

Hello, you knows, that http://xi.rename-it.nl is down? -- Mit freundlichen Grüßen, with kind regards, Jim Knuth --------- Die Oper ist eine hübsche Unterhaltung, die noch besser wäre, wenn nicht dabei gesungen würde. (Claude Debussy)

2 2

[Dovecot] Log sync errors (again)
by Stephen Davies 07 Mar '12

07 Mar '12

As suggested earlier, I deleted all .imap directories and the log sync errors stopped - for a while. They have now returned. It seems to happen for every mailbox that gets accessed. Dovecot version 2.1.1 with pidgeonhole 3.0.0 on Mandriva Linux. Could this interfere with sieve filters? Several users have filters but none of them seem to do anything. Mar 7 09:25:51 server dovecot: imap(john): Error: Log synchronization error at seq=2,offset=38708 for /home/john/Mail/INBOX/.imap/Weather Summaries/dovecot.index: Extension header update points outside header size Mar 7 09:25:51 server dovecot: imap(john): Error: Log synchronization error at seq=2,offset=41576 for /home/john/Mail/INBOX/.imap/Zerna/dovecot.index: Extension header update points outside header size Cheers and thanks, Stephen -- ============================================================================= Stephen Davies Consulting P/L Voice: 08-8177 1595 Adelaide, South Australia. Fax : 08-8177 0133 Records & Collections Management. Mobile:040 304 0583

1 0

[Dovecot] Master Users
by Kelsey Cummings 06 Mar '12

06 Mar '12

I have a setup where I need to use a Master User account to login on behalf of users normally authed via PAM. Is there any existing mechanism that will allow master users to be wired down to specific ip address rather than having these very magic user/pass combos be valid from any random host? It would be totally acceptable to be able to say that master logins were only valid from a specific list of hosts rather than wiring specific master users to specific hosts. -- Kelsey Cummings - kgc(a)corp.sonic.net sonic.net, inc. System Architect 2260 Apollo Way 707.522.1000 Santa Rosa, CA 95407

1 1

[Dovecot] Dovecot saves mails in "wrong" folder.
by Khoroshyy Petro 06 Mar '12

06 Mar '12

Hi all I have installed dovecot 1.2.15 and try to use it together with offlineimap and gnus. my problem is that it saves emails into /var/mail/petro instead of ~/Maildir Thanks. Petro. This is my .dovecot.conf default_mail_env = maildir:%h/Maildir And this is my .offlineimaprc [general] accounts = Gmail maxsyncaccounts = 1 [Account Gmail] localrepository = Local remoterepository = Remote [Repository Local] type = IMAP remotehost = localhost port = 143 remoteuser = petro [Repository Remote] type = IMAP remotehost = imap.gmail.com remoteuser = myname(a)gmail.com ssl = yes maxconnections = 1 realdelete = no folderfilter = lambda foldername: foldername in ['INBOX'] --

1 0

[Dovecot] LDAP auth_bind fails
by Pol Bettinger 06 Mar '12

06 Mar '12

Hello, I wanted to configure dovecot for using auth_bind but didn't succeed to me it seems like it does always an anonymous bind. Dovecot version 2.1.1 (I started with 2.1.0 and hoped 2.1.1 would fix it) I tried to play around with the base, pass_attrs,pass_filter to no avail but didn't succeed. Looking at a wireshark trace i only saw 7 packets and it seemed to me dovecot did only an anonymous bind. any help would appreciated Sincerely Pol Bettinger output of mail.log: Mar 6 12:16:34 Dell dovecot: auth: Debug: client in: AUTH#0112#011CRAM-MD5#011service=imap#011secured#011lip=192.168.16.27#011rip=192.168.16.20#011lport=993#011rport=51838 Mar 6 12:16:34 Dell dovecot: auth: Debug: client out: CONT#0112#011PDQ1NjgyMjE3NjYyMDk3NjkuMTMzMTAzMjU5NEBEZWxsPg== Mar 6 12:16:34 Dell dovecot: auth: Debug: client in: CONT<hidden> Mar 6 12:16:34 Dell dovecot: auth: Debug: password(arvi(a)arvoreen.net,192.168.16.20): passdb doesn't support credential lookups Mar 6 12:16:36 Dell dovecot: auth: Debug: client out: FAIL#0112#011user=arvi(a)arvoreen.net output of dovecot -n: # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 3.0.0-15-generic i686 Ubuntu 11.10 ext4 auth_debug = yes auth_default_realm = arvoreen.net auth_mechanisms = plain digest-md5 cram-md5 auth_verbose = yes base_dir = /var/run/dovecot/ mail_location = maildir:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Archive { auto = create special_use = \Archive } mailbox Drafts { auto = create special_use = \Drafts } mailbox Junk { auto = create special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = create special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap_pass.conf.ext driver = ldap } plugin { sieve = /var/sieve/%d/%1n/%n sieve_dir = /var/sieve/%d/%1n/%n } protocols = imap lmtp sieve service managesieve-login { inet_listener sieve { port = 4190 } } ssl_cert = </etc/ssl/certs/webmail.arvoreen.pem ssl_key = </etc/ssl/private/webmail.arvoreen.key userdb { args = /etc/dovecot/dovecot-ldap_user.conf.ext driver = ldap } protocol lmtp { mail_plugins = " sieve" } output of cat /etc/dovecot/dovecot-ldap_pass.conf.ext: hosts = 127.0.0.1:389 auth_bind = yes auth_bind_userdn = uid=%n,ou=Users,dc=arvoreen,dc=net base = ou=Users,dc=arvoreen, dc=net ldap_version = 3 olcAccess infomation: olcSuffix: dc=arvoreen,dc=net olcAccess: {0}to attrs=userPassword,shadowLastChange by self write by anonymou s auth by dn="cn=admin,dc=arvoreen,dc=net" write by * none olcAccess: {1}to dn.base="" by * read olcAccess: {2}to * by self write by dn="cn=admin,dc=arvoreen,dc=net" write by * read

2 1

[Dovecot] dovecot 2.1.1 + pigeonhole + avelsieve
by Frank Elsner 06 Mar '12

06 Mar '12

Hello all, I've squirrelmail-webmail-1.4.22, dovecot 2.1.1, dovecot-2.1-pigeonhole-0.3.0 installed and working. But I've problems to get the avelsieve plugin for squirrelmail working with dovecot. The "Message Filters" show up in "Options" of squirrelmail, but "Could not log on to timsieved daemon on your IMAP server ........." dovecot log shows: Mar 6 00:00:47 seymour dovecot: managesieve-login: Disconnected: Too many invalid commands. (no auth attempts in 0 secs): 192.168.28.53, secured Where to look for configuration error(s)? | root@seymour: /usr/local/dovecot/src<156> dovecot -n | # 2.1.1: /usr/local/dovecot/etc/dovecot/dovecot.conf | # OS: Linux 2.6.35.14-106.fc14.i686.PAE i686 Fedora release 14 (Laughlin) ext3 | default_vsz_limit = 512 M | disable_plaintext_auth = no | first_valid_uid = 200 | last_valid_uid = 65534 | listen = * | lmtp_save_to_detail_mailbox = yes | login_greeting = c64.shuttle.de - IMAPs Service (dovecot) ready. | login_log_format_elements = %u %r %c | mail_location = maildir:/var/spool/mail/%u | mail_log_prefix = "%Us(%u,%r): " | mail_plugin_dir = /usr/dovecot/lib/dovecot/ | mail_plugins = " notify quota" | managesieve_notify_capability = mailto | managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave | passdb { | args = dovecot | driver = pam | } | plugin { | mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append | mail_log_fields = uid box from subject msgid size flags | mail_log_group_events = yes | quota = maildir:User quota | quota_rule = *:storage=2G | quota_rule2 = Trash:storage=+100M | sieve = ~/.sieve | sieve_dir = ~/sieve | } | postmaster_address = postmaster(a)moltke28.b.shuttle.de | protocols = imap sieve | service anvil { | client_limit = 1027 | } | service auth { | unix_listener auth-client { | group = exim | mode = 0660 | user = exim | } | } | service imap-login { | inet_listener imap { | port = 143 | } | inet_listener imaps { | port = 993 | ssl = yes | } | process_limit = 512 | process_min_avail = 10 | } | service imap-postlogin { | executable = script-login /usr/dovecot/bin/imap-post-login | } | service imap { | executable = imap imap-postlogin | } | service lmtp { | inet_listener lmtp { | address = 0.0.0.0 | port = 24 | } | } | service managesieve-login { | inet_listener sieve { | port = 4190 | } | } | service pop3-login { | inet_listener pop3 { | port = 110 | } | inet_listener pop3s { | port = 995 | ssl = yes | } | } | service pop3 { | process_limit = 1024 | } | ssl_cert = </usr/local/etc/c64.shuttle.de.CRT | ssl_cipher_list = ALL:!LOW:!SSLv2 | ssl_key = </usr/local/etc/c64.shuttle.de-dovecot.KEY | ssl_parameters_regenerate = 6 hours | userdb { | driver = passwd | } | verbose_proctitle = yes | protocol lmtp { | mail_plugins = " notify quota quota" | } | protocol lda { | mail_plugins = " notify quota quota" | } | protocol imap { | imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags | imap_logout_format = [%i/%o] | mail_max_userip_connections = 0 | mail_plugins = " notify quota mail_log quota imap_quota listescape" | } And the avelsieve config.php has: | /* **** NEW OPTION (as of 0.9.4) **** | * Space separated list of preferred SASL mechanisms for the authentication to | * timsieved */ | | $preferred_mech = "PLAIN"; Ok, looking forward for any tip, Frank Elsner

2 1

[Dovecot] Concurrent dovecot instances on same spool?
by Jacek Osiecki 06 Mar '12

06 Mar '12

Hi all, While reading the "Multiple locations, 2 servers - planning questions..." thread, it just hit me that I was planning to do something that seems to be a bit hazardous... I am setting up an high-availability server set, which consists of two (or more) servers with common disk space, all set behind redundant hardware load balancers. At first, there will be two servers and disk space will be kept on NFS server or on both servers using DRBD+OCFS2 filesystem (what creates kind of networked RAID1 storage space). This will be done mostly to keep WWW service available in case when one of servers fails. However, if we have everything redundant, why not have the same with SMTP and POP3/IMAP? But - won't anything fail if two (or more) dovecots are accessing the same disk space, both for IMAP/POP3 and LDA/LMTP? If it is possible, that would be a good solution for the mentioned thread. If not - where are possible dangers, and are there any plans to make it possible in the future? Greetings, -- Jacek Osiecki joshua(a)ceti.pl GG:3828944 I don't want something I need. I want something I want.

3 4

[Dovecot] testing fts-solr?
by Jean-Daniel Beaubien 05 Mar '12

05 Mar '12

hi everyone, However, how can I verify that solr is working properly? Background: - I'm trying to setup 2.1 with fts_solr and eventually test maildir/mdbox. - I used the following webpage as reference to setup solr: http://www.roessner-network-solutions.com/2012/02/19/full-text-search-with-… I'm looking at /var/log/tomcat6/catalina.out file, but see nothing telling me that it's being used (same for /var/log/mail.log, etc.) Any tips? Thanks

10 34

[Dovecot] \NoSelect on missing folders in LIST
by Peter Mogensen 05 Mar '12

05 Mar '12

Hi, I noticed a difference between courier and dovecot, and I'm not sure which of them is wrong wrt. RFC3501 - if any. I have a Maildir which has been accessed by an Apple Mail client, so it got folders like: INBOX INBOX.Trash INBOX.INBOX.folder INBOX.INBOX.folder.a INBOX.INBOX.folder.b The INBOX.INBOX folder does not exist on disk and is not subscribed. Courier responds to: . list "" "*" with * LIST (\Noselect \HasChildren) "." "INBOX.INBOX" But dovecot does not list that folder using "*". However, if you issue: . list "" "INBOX.%" Dovecot answers: * LIST (\Noselect \HasChildren) "." "INBOX.INBOX" This makes some clients using "*" to get the folder list ignore the folderes below "INBOX.INBOX". I know the recommended client way is to use "%", but I'm still curious about which is the correct behaviour. /Peter

2 3

[Dovecot] GSSAPI auth failing for kmail
by Mark Davies 05 Mar '12

05 Mar '12

Hi, have dovecot 2.0.13 running fine on a NetBSD box, with lots of clients happily authenticating to it with GSSAPI. I've just updated an ArchLinux box to latest new version which has meant its switched from using heimdal to using mit krb5 and its kmail is now also slightly newer. Thunderbird successfully authenticates to dovecot from this machine but kmail now fails. Kmail reports: Unable to authenticate via GSSAPI. The server ... replied: SASL(-1): generic failure: GSSAPI Error: Invalid token was supplied (Token header is malformed or corrupt) The dovecot log reports: Feb 27 13:42:18 bats dovecot: auth: GSSAPI(mark(a)ECS.VUW.AC.NZ,130.195.5.88): Invalid base64 data in continued response Any suggestions on how to track down what specifically has changed and how to fix it? cheers mark

2 11

Re: [Dovecot] testing fts-solr?
by Charles Marcus 05 Mar '12

05 Mar '12

On 2012-03-05 3:43 AM, kadafax(a)gmail.com <kadafax(a)gmail.com> wrote: > Le 02/03/12 13:40, Charles Marcus a écrit : >> On 2012-02-28 11:28 AM, Charles Marcus <CMarcus(a)Media-Brokers.com> wrote: >>> On 2012-02-28 11:05 AM, kfx <kadafax(a)gmail.com> wrote: >>>> Ok I feel ashame... it was a third party init scrip who was the >>>> problem :( >>> So... you're saying that Thunderbird now correctly uses server side >>> search? >> Please respond... I need to know whether or not I need to pursue this, >> since we use Thunderbird in house and will be switching soon to >> dovecot... > Yes, for me thunderbird correctly use server side search. Just got confirmation from the OP that his problem with Thunderbird indeed is now gone, so it was a 3rd party init script causing his problems... One less thing to worry about... -- Best regards, Charles

1 0

[Dovecot] 1.0beta to latest and greatest?
by Charles C 05 Mar '12

05 Mar '12

dear dovecot users, This is my first post and with a rather embarassing question. To soften the question up I just want to say I've been very pleased with Dovecot thus far and its low maintenance requirements - perhaps to pleased! I am running an ancient version of Dovecot, version 1.0.beta9. Do I risk corrupting indices etc by upgrading in one go to 2.1.2? Thanks for your input. Charles

2 1

[Dovecot] BlackBerry will not setup my POP3 email, all other mail clients fine
by Ian Solecki 05 Mar '12

05 Mar '12

Hello, hoping someone here might be able to help me or at least point me in the right direction. My company recently (last week) moved to a new dedicated server for website and email hosting. It is a fairly run-of-the-mill Linux machine running cPanel and Dovecot (with the BlackBerry Fastmail service enabled) as a mail server. When we first set up the server, I was able to create a mailbox, access it via any desktop mail client, webmail, AND by setting it up as a basic POP3 account on my BlackBerry. Mail was running fine to and from the BlackBerry, no problems. I deleted that account from my BlackBerry as it was a test account, and went to add my actual account but was unable to do so. Received the "Cannot log in. Verify your email address, user name and password. If the error persists, contact (my domain name)" message. I tried the test account that had been running successfully and sending/receiving emails not minutes earlier, and it would not set up either. I have since tried multiple accounts on multiple BlackBerry devices (different models) on multiple carriers on several of my different domains (all of which point to the same server, of course), to no avail. Yet, any of these accounts still work flawlessly in any desktop mail client (Outlook, OE, Thunderbird, iPad, iPhone, etc). Also, any of these BlackBerrys work flawlessly with any other mail server. The username to log in to these mailboxes is not standard, it's mailboxname+ example.com if the email address is mailboxname(a)example.com and the mail server is mail.example.com. So, I know I have to access the "Advanced Settings" in BlackBerry email setup in order to put this username in. Still, no effect. So, there is something wrong with how mail SETUP works (not sending/receiving, though that may also not work, I have no way of knowing now) between RIM and my server, and it's something that has changed since the server was set up a week ago. My carrier(s) are clueless, my dedicated server provider (Lunarpages) is clueless. Can anyone help?

3 2