- dovecot - dovecot.org

[Dovecot] passwd not found
by Erik - versatel 20 Jul '11

20 Jul '11

If I use in dovecot.conf passdb passwd-file { args = /etc/dovecot/vhosts/%d/etc/shadow } userdb static { args = uid=virtual gid=virtual home=/var/mail/vhosts/%d/%u allow_all_users=yes } I get an authorisation failure in my mail.log file. If I use passdb passwd-file { args = /etc/dovecot/vhosts/shadow } userdb static { args = uid=virtual gid=virtual home=/var/mail/vhosts/%d/%u allow_all_users=yes } This works !!! (without the %d) in the passdb passwd-file Than the %d/%u is correctly rewritten in the userdb static. PS I have in the passwd-file the username@domain and the username documented for testing. I think there is some problem with the %d (DOMAIN) How can I check if %d is filled ?? And how can i make different authorisationdirs and files per domain. Thanks Erik My config # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.2 ext4 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/server.crt ssl_key_file: /etc/ssl/private/server.key login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/var/mail/vhosts/%d/%n/Maildir mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 auth default: mechanisms: plain login passdb: driver: passwd-file args: /etc/dovecot/vhosts/shadow userdb: driver: static args: uid=virtual gid=virtual home=/var/mail/vhosts/%d/%u allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth-client mode: 432 user: postfix group: postfix

1 0

[Dovecot] Dovecot Notification Plugin
by Meisam Navaki 20 Jul '11

20 Jul '11

Hi, I need to know how notfiy plugin works?who will be informed by this plugin?Is it configurable? -- *Regards Meisam Navaki*,

1 0

[Dovecot] Dovecot 2, Imap service, client_limit
by Steve Fatula 20 Jul '11

20 Jul '11

I see back in November of last year, a thread about using client_limit in the imap service (not imap-login) that would allow each imap process serve more than one connection. Sounded good, until I tried it! When I did, unlike the OP of that thread, I got: dovecot: imap(submit.user): Fatal: setuid(503(submit.user) from userdb lookup) failed with euid=501(links): Operation not permitted (This binary should probably be called with process user set to 503(submit.user) instead of 501(links)) So, it would appear that this does not work. Still, the thread was posting results of their testing even that showed it worked. Sample message within the thread, read for more: http://www.dovecot.org/list/dovecot/2010-November/054893.html I'd love to be able to use a single imap process for more than one connection. Is this still possible, or, not? If so, how? Steve

4 3

[Dovecot] DoveCot plugin "mailbox approaching limit" warning?
by Zhou, Yan 20 Jul '11

20 Jul '11

Hi there, I am aware of the "Quota" plugin, but is there any way that DoveCot will place a warning message in user mailbox if it is getting close to its mail quota (but have not exceeded yet)? Thanks, Yan Confidentiality Notice: The information contained in this electronic transmission is confidential and may be legally privileged. It is intended only for the addressee(s) named above. If you are not an intended recipient, be aware that any disclosure, copying, distribution or use of the information contained in this transmission is prohibited and may be unlawful. If you have received this transmission in error, please notify us by telephone (513) 229-5500 or by email (postmaster(a)MedPlus.com) After replying, please erase it from your computer system.

2 2

[Dovecot] quota-warning.sh not working (lda problem?)
by Thomas Krause 20 Jul '11

20 Jul '11

Hi, I setup a new mailserver with dovecot 2.0.12. Everything is working fine (including quota) - except of sending quota warning mails. When running /usr/local/bin/quota-warning.sh 95 user(a)domain.de manually as root or user vmail, the mail is delivered. content of /usr/local/bin/quota-warning.sh #!/bin/sh PERCENT=$1 USER=$2 logger -p mail.info "$PERCENT% Quota-warning sent to $USER" cat << EOF | /usr/local/libexec/dovecot/dovecot-lda -d $USER -o "plugin/quota=maildir:User quota:noenforcing" From: postmaster(a)domain.de Subject: $PERCENT% Mail quota warning Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 8bit Der Speicherplatz Ihres E-Mail-Postfaches ist zu $PERCENT% gefüllt. Bitte löschen Sie alte und unerwünschte E-Mails vom Server, um den Emfang neuer E-Mails aufgrund Speicherplatzmangels nicht zu behindern. Your mailbox with us is now more than $PERCENT% full. To avoid mail loss due to lack of sufficient space, please remove old and unwanted mails from the server. EOF Because of line 4 of the script I see in maillog, that the script is executed, but no mail is delivered? Any ideas? Regards, Tom.

1 1

[Dovecot] Dovecot + Vpopmail quota issues
by qmail＠top-consulting.net 20 Jul '11

20 Jul '11

I can't get dovecot to ignore a certain directory/namespace when calculating quotas. I am running dovecot 1.2.16 with vpopmail configured for quotas. I use the dot (.) as my separator and my user structure is as follows: ../domain.com/user/Maildir for all the user directories I also have for each user: ../domain.com/user/Maildir/Archive which is a symlink to a NFS mounted partition that holds read-only archives In dovecot.conf I have defined them as follows: mail_location = maildir:~/Maildir namespace private { separator = . prefix = ARCHIVE. inbox = no hidden = yes list = yes location = maildir:~/Maildir/Archive } namespace private { separator = . prefix = inbox = yes } This works very well, in as much as I see the Archive namespace and its folders. The problem arises in the fact that Dovecot insists on calculating the 'Archive' namespace/directory storage towards the total storage used. My Quota configuration is as follows: auth default { mechanisms = plain login digest-md5 cram-md5 passdb vpopmail { args = webmail=192.168.1.12 } userdb vpopmail { args = quota_template=quota_rule3=*:backend=%q } ... } plugin { quota = maildir quota_rule = ?:storage=0 quota_rule2 = Archive:ignore quota_rule3 = ARCHIVE:ignore } From what I've read, this is supposed to use the maildirsize file when available or otherwise return no quota. It worked just fine before this new Archive namespace. For a certain user, vpopmail writes the 'maildirsize' file in ../domain.com/user/Maildir/maildirsize and it contains the correct value ( without the /Archive directory ). The problem is that for some reason, something ( I suspect dovecot ) writes a new maildirsize file in ../domain.com/user/Maildir/Archive/maildirsize which also contains the size of Archive. Subsequently, Dovecot adds the two of them up and usually throws me over quota. To test, I have emptied the maildirsize file under Archive and changed its owner to root (perms are 755 ) so that nobody but root can write to it. Dovecot complained right away about it: Jul 19 12:55:21 pop1 dovecot: IMAP(user(a)domain.com): open(/home/vpopmail/domains/B/domain.com/user/Maildir/Archive/maildirsize) failed: Permission denied Despite passing the quota responsibility to vpopmail it seems that Dovecot still tries to update that file. And finally the question... How do I get dovecot to not calculate a quota for that directory/namespace ?

1 2

[Dovecot] Problem with zlib plugin and flags
by Jeremy Maryott 19 Jul '11

19 Jul '11

Hi, I'm working on enabling the zlib plugin and compressing most of the mail on my mail server, and I've run into a bit of a problem with doing things as described on the wiki's zlib plugin page (here: http://wiki.dovecot.org/Plugins/Zlib) I'm using Dovecot 1.2.15 and maildir as a mailbox format on Debian 5. I have a script that implements the steps listed at the bottom of the wiki page. The problem has to do with step 5, which recommends that you add a 'Z' flag to each email that you compress so that you don't compress it again. The problem that I ran into is that when you move an email to another mail folder, this flag appears to go away. As a result, my script has compressed some emails that were already compressed, rendering them unreadable by Dovecot. I've mostly solved that problem, and my compression script now runs 'file' and looks to see if it's gzipped already for each file that's a candidate for compression. I'm not sure this is the best solution (it's definitely slower than just checking the filename), so I'm open to better alternatives. Reading http://wiki.dovecot.org/MailboxFormat/Maildir, I see that Dovecot supports 'non-standard fields' specified after normal flags and a comma. It seems like that might be a better place to put the 'Z' flag, if Dovecot won't retain it when places with the normal flags. I'm unsure how the filename would look if it doesn't currently have any flags, though. Would there just be two commas in a row, followed by my non-standard flag? If I haven't missed or misconfigured anything and what I said above is correct, the wiki should be changed so others don't run into the same problems I have. I'm happy to do so, but I didn't want to make any changes without making sure I was right about what was going on. Thanks, Jeremy

1 0

[Dovecot] PgSQL+TLS
by Christian Roessner 19 Jul '11

19 Jul '11

Hi, I would like to use PostgreSQL instead of a flat file for ACLs: http://wiki2.dovecot.org/SharedMailboxes/Shared How must a connect=-line look like to connect with TLS to a server? Thanks in advance Christian -- Roessner-Network-Solutions Bachelor of Science Informatik 50°34.725'N, 08°40.904'O, Nahrungsberg 81, 35390 Giessen F: +49 641 5879091, M: +49 176 93118939 USt-IdNr.: DE225643613 http://www.roessner-network-solutions.com

2 5

[Dovecot] Dovecot 1.2.17, Proxy and forwarding of remote ip
by Tomislav Mihalicek 19 Jul '11

19 Jul '11

Hi i have a nice working proxy setup and postlogin script that is doing logging logs. echo "$(date +%Y.%m.%d-%H:%M:%S), $USER, $IP, ${1}" >> /var/log/mail/logins.info 2>&1 is it possible that i recieve a remote ip of user client on proxied internal machine, cause i have only the proxy one, and that date is not a relevant to me thanx t. -- View this message in context: http://old.nabble.com/Dovecot-1.2.17%2C-Proxy-and-forwarding-of-remote-ip-t… Sent from the Dovecot mailing list archive at Nabble.com.

2 2

[Dovecot] help
by Guruprasad S N 18 Jul '11

18 Jul '11

Hi I have postfix-2.4.7 and Dovecot 1.0.7 integrated with Windows Active Directory , I have some issue here . can dovecot create the mailbox in the same case which is stored in AD ( eg if my Samaccountname attribute is GuruPrasad or Test123 ) , can the mailbox be created in same case and can it deliver the mail to the same path. Config details attached . 1 Dovecot 1.0.7 2 dovecot -n # 1.0.7: /etc/dovecot.conf login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: maildir:~/Maildir mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): outlook-idle pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login username_format: %Lu passdb: driver: pam userdb: driver: passwd userdb: driver: static args: uid=502 gid=502 home=/var/mail/%u socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix ============================================================================================================================ Disclaimer: This message and the information contained herein is proprietary and confidential and subject to the Tech Mahindra policy statement, you may review the policy at <a href="http://www.techmahindra.com/Disclaimer.html">http://www.techmahindra.com/Disclaimer.html</a> externally and <a href="http://tim.techmahindra.com/Disclaimer.html">http://tim.techmahindra.com/Disclaimer.html</a> internally within Tech Mahindra. ============================================================================================================================

1 0

[Dovecot] dovecot 2.0.13 using LDAP and proxying IMAP4 and POP3 to gmail
by Volker Scheuber 18 Jul '11

18 Jul '11

Fellow dovecot users/contributors, I am building a POP3/IMAP4 proxy solution for an enterprise, where users can login with their common username and then they get single sign-on to all kinds of different applications in the backend. Some of these applications are SaaS apps like gmail. For gmail in particular, I want dovecot to solve the following issues for me: 1. be an IMAP4/POP3 proxy in the enterprise, proxying client requests to mail.com. 2. change both username and password from what's coming in from the client to what's being proxied out to gmail. 3. use LDAP for authentication As a prototype, I implemented #1 and #2 using passwd-files and after a few hours of try and error, I got it to work and was able to login with "username" and "password" and was proxied through to gmail with "username(a)gmail.com" and "gmailpassword". Totally awesome. Now I am stuck porting my working prototype from my laptop and passwd-files to my real lab environment and LDAP. I was able to get the authentication to work but that's about it. I can't get dovecot to do the proxying. I searched the mailing list archives and saw other people having similar issues, but that was almost 4 years ago... The most promising thread similar to my requirements and issues was this one: http://www.dovecot.org/list/dovecot/2007-September/025740.html but it was never fully answered nor did the suggestion given to that thread help me with my issue (but I did follow them). Here is my current configuration: dovecot -n # 2.0.13: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32.36-0.5-default x86_64 SUSE Linux Enterprise Server 11 (x86_64) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no mail_location = mbox:~/mail:INBOX=/var/mail/%n passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap master = yes pass = yes } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } My ldap configuration is: cat /usr/local/etc/dovecot/dovecot-ldap.conf.ext |grep -v ^##* |grep . hosts = 127.0.0.1:389 dn = cn=user,ou=users,o=config dnpass = password auth_bind = yes auth_bind_userdn = cn=%n,ou=users,o=data ldap_version = 3 base = ou=users,o=data deref = never scope = subtree user_attrs = =home=/var/mail,uidNumber=uid,gidNumber=gid user_filter = (&(objectClass=posixAccount)(uid=%n)) pass_attrs = mail=user,userPassword=password,uid=proxy,=ssl=any-cert,city=host,description=pass,cn=nologin pass_filter = (&(objectClass=posixAccount)(uid=%n)) iterate_filter = (objectClass=posixAccount) default_pass_scheme = CRYPT When connecting to dovecot through an IMAP client (evolution in my case) the dovecot log shows: Jul 16 13:32:17 linux-1hen dovecot: auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Jul 16 13:32:17 linux-1hen dovecot: auth: Debug: auth client connected (pid=26601) Jul 16 13:32:17 linux-1hen dovecot: auth: Debug: client in: AUTH1PLAINservice=imapsecuredlip=137.65.156.25rip=164.99.195.4lport=993rport=49203resp=AGFhYmVsbABOMHYzbGwxMjM0NTY= Jul 16 13:32:17 linux-1hen dovecot: auth: Debug: client out: OK1user=aabell Jul 16 13:32:17 linux-1hen dovecot: auth: Debug: master in: REQUEST3762290689266011e9ff0815dea78591a5437731034c14aa Jul 16 13:32:17 linux-1hen dovecot: auth: Debug: ldap(aabell,164.99.195.4): user search: base=ou=users,o=data scope=subtree filter=(&(objectClass=posixAccount)(uid=aabell)) fields=uidNumber,gidNumber Jul 16 13:32:17 linux-1hen dovecot: auth: Debug: ldap(aabell,164.99.195.4): result: gidNumber(gid)=1001 uidNumber(uid)=1001 Jul 16 13:32:17 linux-1hen dovecot: auth: Debug: master out: USER3762290689aabellgid=1001uid=1001home=/var/mail Jul 16 13:32:17 linux-1hen dovecot: imap-login: Login: user=<aabell>, method=PLAIN, rip=164.99.195.4, lip=137.65.156.25, mpid=26604, TLS It doesn't even seem to be recognizing the extra fields I defined in pass_attrs. So I changed my ldap configuration to: cat /usr/local/etc/dovecot/dovecot-ldap.conf.ext |grep -v ^##* |grep . hosts = 127.0.0.1:389 dn = cn=supervisor,ou=sa,o=system dnpass = n0v3ll123 auth_bind = yes auth_bind_userdn = cn=%n,ou=users,o=data ldap_version = 3 base = ou=users,o=data deref = never scope = subtree user_attrs = mail=user,=home=/var/mail,uidNumber=uid,gidNumber=gid,=proxy=y,=ssl=any-cert,=host=209.85.225.109,description=pass,=nologin=y user_filter = (&(objectClass=posixAccount)(uid=%n)) pass_attrs = mail=user,userPassword=password pass_filter = (&(objectClass=posixAccount)(uid=%n)) iterate_filter = (objectClass=posixAccount) default_pass_scheme = CRYPT This time things looked much better, but still not good enough: Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: auth client connected (pid=26787) Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: client in: AUTH1PLAINservice=imapsecuredlip=137.65.156.25rip=164.99.195.4lport=993rport=57079resp=AGFhYmVsbABOMHYzbGwxMjM0NTY= Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: client out: OK1user=aabell Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: master in: REQUEST159789875326787162fbc34468ae7853209715c05e11ad14 Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: ldap(aabell,164.99.195.4): user search: base=ou=users,o=data scope=subtree filter=(&(objectClass=posixAccount)(uid=aabell)) fields=mail,uidNumber,gidNumber,description Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: auth(aabell,164.99.195.4): username changed aabell -> vscheuber(a)gmail.com Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: ldap(vscheuber(a)gmail.com,164.99.195.4): result: description(pass)=gmailpassword gidNumber(gid)=1001 uidNumber(uid)=1001 mail(user)=vscheuber(a)gmail.com Jul 16 13:36:12 linux-1hen dovecot: auth: Debug: master out: USER1597898753vscheuber@gmail.compass=gmailpasswordgid=1001uid=1001home=/var/mailproxy=yssl=any-certhost=209.85.225.109nologin=y Jul 16 13:36:12 linux-1hen dovecot: imap-login: Login: user=<aabell>, method=PLAIN, rip=164.99.195.4, lip=137.65.156.25, mpid=26790, TLS I thought I'd also post here the log of my working prototype configuration with passwd-files. I would expect the ldap output to look similar in some key areas like proxying, but it doesn't: Jul 15 15:04:25 vscdevws dovecot: auth: Debug: client in: AUTH1PLAINservice=imapsecuredlip=::1rip=::1lport=143rport=36444resp=AHZzY2hldWJlcgBwYXNzd29yZA== Jul 15 15:04:25 vscdevws dovecot: auth: Debug: passwd-file(vscheuber,::1): lookup: user=vscheuber file=/etc/dovecot/users Jul 15 15:04:25 vscdevws dovecot: auth: Debug: auth(vscheuber,::1): username changed vscheuber -> vscheuber(a)gmail.com Jul 15 15:04:25 vscdevws dovecot: auth: Debug: client out: OK1user=vscheuber@gmail.comproxyhost=209.85.225.109port=993ssl=any-certpass=gmailpassword Jul 15 15:04:26 vscdevws dovecot: imap-login: proxy(vscheuber(a)gmail.com): started proxying to 209.85.225.109:993: user=<vscheuber(a)gmail.com>, method=PLAIN, rip=::1, lip=::1, secured If you read to this point, I say "thank you!" just for that. Please advise where my misconfiguration could be. Thank you very much, I appreciate your time and help! Volker

1 1

[Dovecot] ACL/shared-folder and Thunderbird
by Christian Roessner 17 Jul '11

17 Jul '11

Hi, I still have some problems with thunderbird and Dovecot. I added ACL/shared-folders to dovecot. While everything is working perfectly under Apple Mail and roundcube, thunderbird behaves very strange. What I did: 1. Step I have three mail accounts set up in thunderbird. In the second and third account I managed IMAL-ACLs on the INBOXes, with following flags: eilrwtsd 2. Step At the first account, I chose IMAP subscriptions and I added both INBOXes (shared/.../INBOX) 3. Step Accounts were shown under shared. The folder shared and one level under shared was wriiten in italic. The INBOXes were shown as regular. 4. Step Clicking on each INBOX showed the mails. I chose properties and selected to compress each folder, if it shows more than 100 mails. 5. Step Closing Thunderbird and restarting it. Now thunderbird shows error notifications that it could noct find a mailbox named shared/shared and that mailboxes shared/system(a)service.intern and shared/de1001(a)service.intern would not exist. The folders shared and the level beyond now is shown as regular folder. I still can see the mails form the INBOXes. But each time I reopen Thunderbird, I get the same error messages. This is, what dovecot is logging: Jul 17 14:38:51 mx0 dovecot: auth: ldap(shared(a)roessner-net.de): unknown user Jul 17 14:38:51 mx0 dovecot: imap(de10000(a)service.intern): Error: Couldn't create namespace 'shared/' for user shared: userdb didn't return a home directory, but plugin setting quota used it (%h): dict:User quota::file:%h/mdbox/dovecot-quota Jul 17 14:40:51 mx0 dovecot: imap(de10000(a)service.intern): Error: Couldn't create namespace 'shared/' for user shared: userdb didn't return a home directory, but plugin setting quota used it (%h): dict:User quota::file:%h/mdbox/dovecot-quota Jul 17 14:42:49 mx0 dovecot: imap(de10000(a)service.intern): Error: Couldn't create namespace 'shared/' for user shared: userdb didn't return a home directory, but plugin setting quota used it (%h): dict:User quota::file:%h/mdbox/dovecot-quota doveadm config -n # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-33-generic-pae i686 Ubuntu 10.04.2 LTS auth_cache_size = 10 M auth_default_realm = roessner-net.de auth_master_user_separator = * auth_mechanisms = plain login digest-md5 cram-md5 ntlm auth_realms = roessner-net.de auth_verbose = yes lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_access_groups = vmail mail_gid = vmail mail_location = mdbox:~/mdbox mail_plugins = quota mail_privileged_group = mail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = / } namespace { list = children location = mdbox:%%h/mdbox:INDEX=~/mdbox/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/mail/virtual/shared-mailboxes quota = dict:User quota::file:%h/mdbox/dovecot-quota quota_rule = *:storage=300M:messages=20000 quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u recipient_delimiter = + sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = -reject } postmaster_address = postmaster(a)mx0.roessner-net.de protocols = imap pop3 sieve lmtp service auth-worker { unix_listener auth-worker { user = vmail } user = vmail } service auth { unix_listener auth-userdb { group = vmail mode = 0660 } user = vmail } service imap-login { service_count = 0 vsz_limit = 64 M } service lmtp { inet_listener lmtp { address = ::1 port = 24 } } service managesieve-login { service_count = 0 } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert = </ca/mail.roessner-net.de/newcert.pem ssl_key = </ca/mail.roessner-net.de/newkey.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = quota sieve } protocol lda { mail_plugins = quota sieve acl } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep mail_max_userip_connections = 50 mail_plugins = quota imap_quota acl imap_acl } Sorry to bother you once again with dovecot/thunderbird questions. It all began by switching from maildir to mdbox (which I wanted to test for shared file systems in the future...) Thunderbird 3.1.11 (Ubuntu Natty version) Best wishes and many thanks in advance Christian -- Roessner-Network-Solutions Bachelor of Science Informatik 50°34.725'N, 08°40.904'O, Nahrungsberg 81, 35390 Giessen F: +49 641 5879091, M: +49 176 93118939 USt-IdNr.: DE225643613 http://www.roessner-network-solutions.com

1 1

[Dovecot] dovecot init script
by Brandon Lamb 17 Jul '11

17 Jul '11

Anyone have a working startup script for ubuntu 11.04? Ive used debian forever, but apparently /var/run is now a tmpfs, so there is no dovecot directory on a reboot. Its all brand new to me so I dont know if there is a standard way to have it created on boot (obviously other system scripts are creating directories). I dont even know if this is something that goes in an init.d script or configured elsewhere. I came across something that mentioned systemd and /etc/tmpfiles.d (or something like that) which didnt seem to do anything. Anyway, any help or a point in the right direction would be awesome =D Thanks! Brandon

1 1

[Dovecot] Dovecot 2.0.12 LMTP does not write +detail written to Delivered-To: header
by Michael George 16 Jul '11

16 Jul '11

Hi Timo and List, The Dovecot 2.0.10 changelog includes: * LMTP: For user+detail@domain deliveries, the +detail is again written to Delivered-To: header. I have recipient_delimiter = + set, lmtp_save_to_detail_mailbox=yes is working, however Dovecot 2.0.12 LMTP processes are not adding these headers to messages on delivery. Are there other settings that may potentially conflict with this feature?

1 0

[Dovecot] ImapTest and QRESYNC testing
by Norman Maurer 15 Jul '11

15 Jul '11

Hi there, I'm currently working on adding QRESYNC support for james.apache.org/imap (which is a JAVA - based imapserver). For testing I'm currently using ImapTest but I'm currently not really sure it really reflect the RFC. Here are the "problems" I see: * It expect to have the UID param in the FETCH Response if QRESYNC was enabled (I was not able to spot the section were it is stated in the rfc) * EXPUNGE command seems to expect EXPUNGE Responses if QRESYNC was enabled, but from the RFC I think VANISHED is valid also. It even seems to fail when testing again dovecot.. So how much can I trust it when testing QRESYNC ? Thanks, Norman Ps: I'm not good a C at all, so its hard for me to provide patches ;)

1 0

[Dovecot] mail delivery
by Amira Othman 15 Jul '11

15 Jul '11

I am using ISPConfig 3 ,postfix,dovecot and mysql the problem is that I receive mail on server but can't get it through outlook and when check using webmin I found that it reads form location different than what is written in dovecot Regards Amira Othman Server Administrator <http://www.cairosource.com/> www.cairosource.com 6 EL Nil EL Abyad, Mohandiseen Cairo, Egypt Direct: +2 02 3303 7175 Mobile: +2 012 220 4165 The information transmitted is intended solely for the individual or entity to which it is addressed and may contain confidential and/or privileged material. Any review, retransmission, dissemination or other use of or taking action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you have received this email in error please contact the sender and delete the material from any computer.

1 0

[Dovecot] Backup namespace
by qmail＠top-consulting.net 15 Jul '11

15 Jul '11

I use dovecot 1.2.16 and I use . (dot) as the hierarchy separator. My user structure is like so: username/Maildir/.Folder1 username/Maildir/.Folder1.Subfolder The Inbox is right under: username/Maildir/cur & username/Maildir/new My namespace definition for the regular mail is: namespace private { separator = . prefix = inbox = yes } In a separate directory, nfs mounted, I also hold full daily backups of each users entire Maildir. It has the following structure: /archive/username/.14.07.2011/.Folder1 /archive/username/.14.07.2011/.Folder1.Subfolder /archive/username/.15.07.2011/.Folder1 /archive/username/.15.07.2011/.Folder1.Subfolder What I'm trying to do is to make the Backups available to each user in their IMAP. I was thinking of symlinking like this: username/Maildir/Backups --> /archive/username/ Would that work ? What should my namespace look like for this situation ? Is there a better way to do this ?

1 0

[Dovecot] authentication problems with pam_mkhomedir
by Defenestrate 15 Jul '11

15 Jul '11

Hi! I'm struggling with pam_mkhomedir. Accounts are stored in LDAP (CentOS Directory Server AKA 389 Directory Server). I am not pre-creating user home directories, and would like to use the pam_mkhomedir module to create the directories on the fly, when a user is authenticated via pop3s. pam_mkhomedir is working for interactive (e.g. SSH logins), but I don't want to require users to login interactively just so their home directory is created. Dovecot version: 1.0.7 dovecot -n output: protocols: pop3s >ssl_cert_file: /etc/pki/tls/certs/mail.ourdomain.tld.pem >ssl_key_file: /etc/pki/tls/private/mail.ourdomain.tld.pem >login_dir: /var/run/dovecot/login >login_executable: /usr/libexec/dovecot/pop3-login >mail_privileged_group: mail >mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u >mail_executable: /usr/libexec/dovecot/pop3 >mail_plugin_dir: /usr/lib64/dovecot/pop3 >pop3_client_workarounds: oe-ns-eoh, outlook-no-nuls >auth default: > verbose: yes > debug: yes > passdb: > driver: pam > args: session=yes dovecot > userdb: > driver: ldap > args: /etc/dovecot-ldap.conf /etc/pam.d/dovecot: authsufficientpam_ldap.so >authrequiredpam_deny.so > > >accountsufficientpam_ldap.so >accountrequiredpam_deny.so > > >passwordsufficientpam_ldap.so use_authtok >password requiredpam_deny.so > > >sessionoptionalpam_ldap.so >sessionrequiredpam_mkhomedir.so skel=/etc/skel umask=0022 > >With the pam_mkhomedir.so line, I see the following in maillog: Jul 14 16:14:26 mail dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 secured lip=xxx.xxx.xxx.xxx rip=xxx.xxx.xxx.xxx resp=<hidden> Jul 14 16:14:26 mail dovecot: auth(default): client out: CONT 1 Jul 14 16:14:26 mail dovecot: auth(default): client in: CONT<hidden> Jul 14 16:14:26 mail dovecot: auth(default): pam(joe.schmoe,xxx.xxx.xxx.xxx): lookup service=dovecot Jul 14 16:14:26 mail dovecot: auth(default): new auth connection: pid=25209 Jul 14 16:14:26 mail dovecot: auth(default): pam(joe.schmoe,xxx.xxx.xxx.xxx): pam_open_session() failed: Permission denied Jul 14 16:14:28 mail dovecot: auth(default): client out: FAIL 1 user=joe.schmoe Jul 14 16:14:28 mail dovecot: auth(default): client in: AUTH 2 PLAIN service=POP3 secured lip=xxx.xxx.xxx.xxx rip=xxx.xxx.xxx.xxx resp=<hidden> With the pam_mkhomedir.so line commented out: Jul 14 16:15:27 mail dovecot: auth(default): client out: CONT 1 Jul 14 16:15:27 mail dovecot: auth(default): client in: CONT<hidden> Jul 14 16:15:27 mail dovecot: auth(default): pam(joe.schmoe,xxx.xxx.xxx.xxx): lookup service=dovecot Jul 14 16:15:27 mail dovecot: auth(default): client out: OK 1 user=joe.schmoe Jul 14 16:15:27 mail dovecot: auth(default): master in: REQUEST 1 25286 1 Jul 14 16:15:27 mail dovecot: auth(default): ldap(joe.schmoe,xxx.xxx.xxx.xxx): user search: base=ou=People, dc=ourdomain, dc=tld scope=subtree filter=(&(objectClass=posixAccount)(uid=joe.schmoe)) fields=homeDirectory,uidNumber,gidNumber Jul 14 16:15:27 mail dovecot: auth(default): master out: USER 1 joe.schmoe home=/home/joe.schmoe uid=1057 gid=1000 Jul 14 16:15:27 mail dovecot: POP3(joe.schmoe): mkdir_parents(/home/joe.schmoe/mail) failed: Permission denied Jul 14 16:15:27 mail dovecot: POP3(joe.schmoe): Failed to create storage with data: mbox:/home/joe.schmoe/mail:INBOX=/var/spool/mail/joe.schmoe Jul 14 16:15:27 mail dovecot: child 25292 (pop3) returned error 89 Jul 14 16:15:27 mail dovecot: pop3-login: Login: user=<joe.schmoe>, method=PLAIN, rip=xxx.xxx.xxx.xxx, lip=xxx.xxx.xxx.xxx, TLS Jul 14 16:19:05 mail dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 secured lip=xxx.xxx.xxx.xxx rip=xxx.xxx.xxx.xxx resp=<hidden> Any Suggestions? Thank you!

1 0

[Dovecot] Process parameters tuning
by Angel L. Mateo 14 Jul '11

14 Jul '11

Hi, I'm having problems with director and lmtp for delivering messages to my dovecot farm. Also I have a warning like this: doveconf: Warning: service auth { client_limit=4096 } is lower than required under max. load (5048) doveconf: Warning: service anvil { client_limit=1000 } is lower than required under max. load (2003) So I'm trying to tune processes parameters, but I haven't found a complete description of these parameters. All I've found are examples. Questions are about client_limit, service_count, process_limit and process_min_avail. I think that process_limit and process_min_avail are the maximum of running processes for a service and the minimuf of idle process, respectively. But I don't completely understand what exactly are client_limit and service_count, Service_count means how many times a process is reused. If you configure it as 1 means that every time a process ends its connections, it dies. If you configure as 0, when the connections ends, then the process remains idle waiting for new connections. Isn't it? But what does client_limit means? The number of clients that a process can handle? Then number that can handle concurrently? Can a process handle more than one client concurrently? The documentation at http://wiki2.dovecot.org/LoginProcess simply says: * Otherwise new processes are created only once an existing one's connection count reaches client_limit * Default client_limit * process_limit = 1000*100 = 100k connections Does this mean that a process handle a maximun of client_limit connections concurrently? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

1 0

[Dovecot] IMAP access based on username & IP
by Andrei Dumitrescu 14 Jul '11

14 Jul '11

Hello, I have all the users and passwords in separate files like in the configuration below. I want that a specific user (ex: joe(a)domain.con) to be able to read mails using imaps only from a specific IP. All the other users should be able to read email from any IP. How can I do that? Thank you Imap version: #dovecot --version 1.2.12 dovecot.conf: # 1.2.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35-28-server x86_64 Ubuntu 10.10 ext4 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.info ssl_cert_file: /etc/ssl/certs/dovecot1.crt ssl_key_file: /etc/ssl/private/dovecot1.key ssl_cipher_list: ALL:!LOW:!SSLv2 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_greeting: IMAP ready. login_processes_count: 7 login_max_processes_count: 84 verbose_proctitle: yes first_valid_uid: 1000 first_valid_gid: 1000 mail_privileged_group: mail mail_location: maildir:/var/spool/vmail/%d/%n fsync_disable: yes mbox_write_locks: fcntl dotlock imap_client_workarounds: delay-newmail netscape-eoh tb-extra-mailbox-sep lda: postmaster_address: postmaster(a)example.com sendmail_path: /usr/sbin/sendmail auth default: mechanisms: plain login user: mail username_format: %Lu passdb: driver: pam args: session=yes dovecot passdb: driver: passwd-file args: /etc/dovecot/dovecot_passwd userdb: driver: passwd args: blocking=yes userdb: driver: passwd-file args: /etc/dovecot/dovecot_users socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384

2 1

[Dovecot] Director lmtp timeout errors
by Angel L. Mateo 13 Jul '11

13 Jul '11

Hello, I have configured two dovecot servers with director acting as lmtp/imap/pop proxy server with 8 dovecot backend servers. In our test environment we had no problem, but when we migrated to production environment, our mail list server (it delivers mail through lmtp) is having a lot of errors like this: 451 4.4.0 Remote server not answering (DATA output timeout) (in reply to end of DATA command)) I have found this same issue in some posts to this list, but I can't find any solution Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

1 0

[Dovecot] Dovecot 2.0.13 and removing IMAP folders in thunderbird
by Christian Roessner 13 Jul '11

13 Jul '11

Hi, I use Dovecot-2.0.13 with mdbox and Thunderbird (IMAP). I have dozens of imap folders and sometimes I wish to delete several folders: First Problem: If I remove a folder under TB, it get moved to my Trash folder. After that I close TB, which also purges the trash. When I come back, the deleted folder and its content is still there. There is no way to remove it with TB. On the server side I see that the folder is listed under mailboxes/Trash and in the subscriptions file, a last line shows that Trash/foldername is subscribed. If I remove that line and the mailboxes-folder, then TB is happy again. Second problem: If I have two folders a and b, both containing a folder example: a/example b/example I only can delete one folder. By deleting the second one, the IMAP server tells me that there already exists on folder named example. I am not sure, if this is thunderbird or dovecot related, but both problems are really annoying. Am I missing some configuration? Thunderbird is Ubuntu's packaged version 3.1.10. Thanks for any ideas and help in advance and don't get me wrong: I really love dovecot ;-) Best wishes Christian -- Roessner-Network-Solutions Bachelor of Science Informatik 50°34.725'N, 08°40.904'O, Nahrungsberg 81, 35390 Giessen F: +49 641 5879091, M: +49 176 93118939 USt-IdNr.: DE225643613 http://www.roessner-network-solutions.com

3 5

[Dovecot] How to turn off "plus" delivery
by gene 13 Jul '11

13 Jul '11

I use a lot of plus-style addresses (me+stuff(a)example.com) except I use underscore as the separator rather than plus (me_stuff(a)example.com) My mail logs are full of messages where dovecot looks for a mailbox named "stuff", fails, then delivers to my inbox. Is there a way to turn that off so that dovecot automatically delivers to my inbox? Thanks! Here are the details: > dovecot --version 1.2.15 > dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38-8-server x86_64 Ubuntu 11.04 info_log_path: /dev/null log_timestamp: %Y-%m-%d %H:%M:%S ssl_cert_file: /etc/ssl/server.crt ssl_key_file: /etc/ssl/server.key ssl_cipher_list: ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock imap_client_workarounds: outlook-idle delay-newmail lda: postmaster_address: postmaster(a)xxxxxxxxx.com postmaster_address: postmaster(a)xxxxxxxxx.com mail_plugins: sieve quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r postmaster_address: postmaster(a)xxxxxxxxx.com mail_plugins: sieve quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ rejection_reason: Your message to <%t> was automatically rejected:%n%r auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve sieve: ~/.dovecot.sieve sieve_dir: ~/sieve > cat ~/.dovecot.sieve require ["regex","fileinto"]; if header :regex ["X-Bogosity"] ["^ *Spam,"] { fileinto "caughtspam"; stop; } # excerpt from mail.log: postfix/pipe[32255]: BE4FCE24069: to=<gene_att(a)xxxxxxxxxx.com>, relay=bogo_filter, delay=1.2, delays=0.13/0.01/0/1.1, dsn=2.0.0, status=sent (delivered via bogo_filter service) postfix/qmgr[28916]: BE4FCE24069: removed postfix/cleanup[32254]: DBA1EE2406E: message-id=<1310331364610.sdc.29057010.18396.155116668(a)connect2.wireless.att-mail.com> postfix/qmgr[28916]: DBA1EE2406E: from=<sdc.29057010.18396.155116668(a)connect2.wireless.att-mail.com>, size=7859, nrcpt=1 (queue active) dovecot: deliver(gene): sieve: msgid=<1310331364610.sdc.29057010.18396.155116668(a)connect2.wireless.att-mail.com>: failed to store into mailbox 'att': Mailbox doesn't exist: att dovecot: deliver(gene): sieve: script /home/gene/.dovecot.sieve failed with unsuccessful implicit keep dovecot: deliver(gene): msgid=<1310331364610.sdc.29057010.18396.155116668(a)connect2.wireless.att-mail.com>: save failed to att: Mailbox doesn't exist: att dovecot: deliver(gene): msgid=<1310331364610.sdc.29057010.18396.155116668(a)connect2.wireless.att-mail.com>: saved mail to INBOX postfix/local[32261]: DBA1EE2406E: to=<gene_att(a)xxxxxxxxxx.com>, relay=local, delay=0.05, delays=0.01/0.01/0/0.03, dsn=2.0.0, status=sent (delivered to command: /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-dovecot-postfix.conf -n -m "${EXTENSION}") postfix/qmgr[28916]: DBA1EE2406E: removed

2 1

[Dovecot] missing +r perm:
by Max Dunlap 12 Jul '11

12 Jul '11

This is probably a really simple issue but I am not sure how to tackle it. sudo dovecot -n: http://pastie.org/2179100 The error message in mail.log: http://pastie.org/2179032 Dovecot.conf says: mail_privileged_group: mail I thought of added the user dovecot to the group mail in hopes of solving the permissions problem, but it didn't seem to make a difference. Any ideas?

5 15

[Dovecot] need help with metadata plugin
by Helga Mayer 12 Jul '11

12 Jul '11

Hello, I've downloaded the metadata plugin from http://hg.intevation.org/kolab/dovecot-metadata-plugin compiled it without errors, made the entries as described in README in dovecot.conf. Only ANNOTATEMORE or anything else additional doesn't show up in the capabilties. Is there anything wrong with my configuration? What I see is: telnet localhost 143 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready. a001 login myaccount secret a001 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk] Logged in Output of dovecot -n: # 1.2.12: /etc/dovecot.conf # OS: Linux 2.6.18-238.9.1.el5 x86_64 Scientific Linux SL release 5.5 (Boron) listen(default): 192.168.0.104:143 127.0.0.1:143 listen(imap): 192.168.0.104:143 127.0.0.1:143 listen(pop3): *:110 ssl_listen(default): <testserver address>:993 ssl_listen(imap): <testserver address>:993 ssl_listen(pop3): <testserver address>:995 ssl_cert_file: /etc/ssl/certs/imapd.pem ssl_key_file: /etc/ssl/certs/imapd.pem disable_plaintext_auth(default): no disable_plaintext_auth(imap): no disable_plaintext_auth(pop3): yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_max_processes_count: 2048 max_mail_processes: 2048 first_valid_uid: 200 mail_drop_priv_before_exec(default): yes mail_drop_priv_before_exec(imap): yes mail_drop_priv_before_exec(pop3): no mail_executable(default): /etc/mail/bin/acl-groups mail_executable(imap): /etc/mail/bin/acl-groups mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_process_size: 1024 mail_plugins(default): acl imap_acl lazy_expunge mail_plugins(imap): acl imap_acl lazy_expunge mail_plugins(pop3): lazy_expunge mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 mail_log_max_lines_per_sec: 0 namespace: type: private separator: / location: maildir:/maildir/%1n/%u:LAYOUT=fs inbox: yes list: yes subscriptions: yes namespace: type: private separator: / prefix: .EXPUNGED/ location: maildir:/maildir/expunged/%1n/%u:LAYOUT=fs hidden: yes list: no subscriptions: yes namespace: type: shared separator: / prefix: Shared/%%u/ location: maildir:/maildir/%%1n/%%u:LAYOUT=fs list: children namespace: type: public separator: / prefix: Groups/ location: maildir:/maildir/public:LAYOUT=fs list: children lda: postmaster_address: postmaster@<our.domain> mail_plugins: acl auth default: mechanisms: plain login verbose: yes debug: yes passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/spool/postfix/private/auth-master mode: 384 user: postfix group: postfix plugin: acl: vfile acl_shared_dict: proxy::acl_dict lazy_expunge: .EXPUNGED/ metadata_dict: proxy:/var/run/dovecot/dict-server:metadata dict: acl_dict: mysql:/etc/dovecot-dict-sql.conf metadata: sqlite:/etc/metadata-dict.conf /var/run/dovecot total 8 srw------- 1 root root 0 Jul 8 11:04 auth-worker.27644 srwxrwxrwx 1 root root 0 Jul 8 11:04 dict-server lrwxrwxrwx 1 root root 17 Jul 8 11:04 dovecot.conf -> /etc/dovecot.conf drwxr-x--- 2 root amavis 4096 Jul 8 11:04 login -rw------- 1 root root 6 Jul 8 11:04 master.pid Kind Regards Helga Mayer Helga Mayer Universität Hohenheim Kommunikations-, Informations- und Medienzentrum (630) IT-Dienste | Mail Schloss-Westhof-Süd | 70599 Stuttgart Tel.: +49 711 459-22838 | Fax: +49 711 459-23449 https://kim.uni-hohenheim.de *************************************************************************** A: Because we read from top to bottom, left to right. Q: Why should i start my reply below the quoted text?

1 1

Re: [Dovecot] POP3 vs. IMAP Load/Memory usage in Dovecot 1.0.15
by David Ledger 12 Jul '11

12 Jul '11

At 01:59 -0500 12/7/11, Stan Hoeppner wrote: >On 7/12/2011 1:12 AM, Rainer Frey wrote: >> >> On 11.07.2011, at 17:03, Stan Hoeppner wrote: >> >>> The R410 is a two socket Xeon box with max 2 x 6 core CPUs. The 24 CPUs >>> you see is the result of HyperThreading being enabled. I'd disable HT >>> if I were you, or those boxen mine. >> >> Why? > >It's a troubleshooting step. HT can cause weird problems with some >systems/kernels. It can also decrease performance with some workloads. > As with anything, if it doesn't provide benefit, turn if off to reduce >complexity and potential problems. Or, another way, HT only helps when having twice as many (apparent) processors running at half the (effective) speed is good for your specific workload. Just because it's a band-waggon it doesn't mean you have to jump onto it. David -- David Ledger - Freelance Unix Sysadmin in the UK. HP-UX specialist of hpUG technical user group (www.hpug.org.uk) david.ledger(a)ivdcs.co.uk www.ivdcs.co.uk

1 0

[Dovecot] Many "Error: Corrupted index cache file /XXX/dovecot.index.cache: invalid record size"
by Florent Bautista 11 Jul '11

11 Jul '11

Hi all, I just joigned this list, so I'm sorry if this problem has already been reported. I'm running Dovecot 2.0.13 on many servers, one for POP/IMAP access, others for LDA, others for authentification only, etc. All servers are accessing a shared file system, based on MooseFS (www.moosefs.org) The FS is mounted using FUSE. All my Dovecot servers have this configuration : mail_fsync = always mail_nfs_index = yes mail_nfs_storage = yes mmap_disable = yes (as adviced for NFS installation). But I'm still getting errors like this in POP/IMAP logs : Error: Corrupted index cache file /my_moosefs_fs/domain/user/indexes/.INBOX/dovecot.index.cache: invalid record size Sometimes my Dovecot LDA repairs these files, but then it happens again... All my servers are running Debian 6 over KVM virtualization. Have you ever encountered this ? Do you think this is a Dovecot problem or MooseFS problem ? Thank you a lot for your answers. -- Florent Bautista ------------------------------------------------------------------------ Ce message et ses éventuelles pièces jointes sont personnels, confidentiels et à l'usage exclusif de leur destinataire. Si vous n'êtes pas la personne à laquelle ce message est destiné, veuillez noter que vous avez reçu ce courriel par erreur et qu'il vous est strictement interdit d'utiliser, de diffuser, de transférer, d'imprimer ou de copier ce message. This e-mail and any attachments hereto are strictly personal, confidential and intended solely for the addressee. If you are not the intended recipient, be advised that you have received this email in error and that any use, dissemination, forwarding, printing, or copying of this message is strictly prohibited. ------------------------------------------------------------------------

1 2

[Dovecot] Dovecot NFS locking issue
by satish patel 11 Jul '11

11 Jul '11

Hi All, We had 15 imap/pop UW-imap servers behind load balancer and mail storage was NFS for almost around ~30,000 users on it. Currently we migrate UW-imap to dovecot with fcntl NFS locking. After migration on dovecot it started error related locking see following error Error: fcntl() failed with mbox file /home/w/a/wahmed/.inbox: No locks available Error: fcntl() failed with mbox file /home/e/d/edurand/.inbox: No locks available Look like my NFS locking getting overload or something its (netapps NFS server) what you suggest to fix this issue ? how uw-imap was working with NFS before ? Appreciate your help. -S

2 2

[Dovecot] Dovecot indexes
by Mike Prispan 11 Jul '11

11 Jul '11

Hi, could someone answer my following questions about dovecot indexes? - If I delete dovecot indexes, it recreates them without any problem, right? - If dovecot recreates indexes, it does not affect users (they don't have to download all emails again, seen flag is not lost etc.) or is there any problem? - If I use mail_location = ...:INDEX=MEMORY, it recreates indexes every time dovecot is (re)started, right? Does it have any negative effect except performance/resources? - Is there any difference in indexes for mbox and maildir (related to previous questions)? Thanks Mike

3 2

[Dovecot] compressed folder bug
by Giulio Casella 11 Jul '11

11 Jul '11

I found a strange behaviour in dovecot compressed folder, maybe a bug. It happens only if you have one (and just one!) email in a gz compressed folder. I'm talking about a mbox server. Step to reproduce: - create a new folder, using any client (I think this step is not important, it happens also if tou create this folder server-side). - copy one message (any message) into newly created folder (using your favourite drag-n-drop gesture, saving in that folder using you character client (mutt,...), etc.) - if your client automatically subscribe to newly created folders, unsubscribe from it - On your server "gzip newfolder" - On your client subscribe "newfolder.gz" - Try to access you newfolder This is what I get in logfiles: Jul 11 14:08:08 myhostname dovecot: imap(giulio): Error: Next message unexpectedly lost from mbox file /home/giulio/Mail/testfolder.gz at 9082 (cached) Jul 11 14:08:08 myhostname dovecot: imap(giulio): Error: read(/home/giulio/Mail/testfolder.gz) failed: Invalid argument (uid=1) Jul 11 14:08:08 myhostname dovecot: imap(giulio): Disconnected: Internal error occurred. Refer to server log for more information. [2011-07-11 14:08:08] bytes=2045/23657 The funniest thing is that if I have a folder with more than one message it works like a charm. Some info about me: - dovecot version 2.0.13 - gentoo linux, with kernel 2.6.38-gentoo-r6 - system running on a VMWare virtual machine (32bit) - reiserfs filesystem my dovecot -n output: ------------------------------------------------------------------------ # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38-gentoo-r6 i686 Gentoo Base System release 2.0.2 auth_mechanisms = plain login disable_plaintext_auth = no listen = * mail_gid = mail mail_location = mbox:~/Mail:INBOX=/var/mail/%u:INDEX=~/ mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = * driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } service imap-login { inet_listener imap { address = imap.mydomain.it } inet_listener imaps { address = imap.mydomain.it } } service pop3-login { inet_listener pop3 { address = pop.mydomain.it } inet_listener pop3s { address = pop.mydomain.it } } ssl_cert = </etc/ssl/dovecot/server.pem ssl_key = </etc/ssl/dovecot/server.key syslog_facility = local6 userdb { driver = passwd } protocol lda { mail_plugins = sieve } protocol imap { mail_plugins = " zlib" plugin { zlib_save = gz zlib_save_level = 6 } } local imap.dsi.unimi.it { disable_plaintext_auth = no } local pop.dsi.unimi.it { disable_plaintext_auth = no } local imap.dsi.unimi.it { protocol imap { ssl_cert = </etc/pki/CA/certs/imap.mydomain.it.pem ssl_key = </etc/pki/CA/certs/imap.mydomain.it.key } } local pop.dsi.unimi.it { protocol pop3 { pop3_uidl_format = %08Xv%08Xu ssl_cert = </etc/pki/CA/certs/pop.mydomain.it.pem ssl_key = </etc/pki/CA/certs/pop.mydomain.it.key } } ------------------------------------------------------------------------ Any ideas? TIA, gc -- Giulio Casella giulio at dsi.unimi.it System and network manager Computer Science Dept. - University of Milano

1 0

[Dovecot] Lots of LMTP errors Remote server not answering (DATA output timeout) (in reply to end of DATA command))
by Angel L. Mateo 11 Jul '11

11 Jul '11

Hello, I have configured two dovecot servers with director acting as lmtp/imap/pop proxy server with 8 dovecot backend servers. In our test environment we had no problem, but when we migrated to production environment, our mail list server (it delivers mail through lmtp) is having a lot of errors like this: 451 4.4.0 Remote server not answering (DATA output timeout) (in reply to end of DATA command)) Proxy and backend servers are not loaded. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

1 2

[Dovecot] dsync and compressed folders
by Giulio Casella 11 Jul '11

11 Jul '11

I'm trying to migrate my old dovecot server (mbox based) to a new one (maildir based), both are version 2.0.13. I'm using dsync: oldserver# dsync -u username backup ssh root@newserver dsync -u username Everything is working like a charm but when it tries to convert compressed folder I got an error: dsync-local(username): Error: Failed to sync mailbox OldMails/2008.gz: Mailbox isn't a valid mbox file. Both old and new installations support compressed folder via zlib plugin. If I'm not wrong dsync doesn't support compressed folder, does it? And, if so, are there any chances to have dsync support gzip'ed folders in the (near) future? Many thanks in advance, gc -- Giulio Casella giulio at dsi.unimi.it System and network manager Computer Science Dept. - University of Milano

1 0

[Dovecot] n00b here -- pop email deletion
by Glenn English 11 Jul '11

11 Jul '11

I'm running Dovecot IMAP and POP3 on Debian. But it look's like it's keeping mail in the user's inbox on the server until it's deleted by the user. I thought POP servers deleted email as soon as it was downloaded, but apparently not, according to dovecot.org. Is there something in the Dovecot conf I can do to get rid of all this redundant crud? I see several conversations on the 'Net about "quotas" that look like they might keep stuff around for a few days or weeks, then delete. That sounds lovely, but I don't understand them enough to try to make it happen. dovecot -n: > # 1.0.15: /etc/dovecot/dovecot.conf > log_timestamp: %Y-%m-%d %H:%M:%S > protocols: imap pop3 > ssl_listen: * > ssl_disable: yes > disable_plaintext_auth: no > login_dir: /var/run/dovecot/login > login_executable(default): /usr/lib/dovecot/imap-login > login_executable(imap): /usr/lib/dovecot/imap-login > login_executable(pop3): /usr/lib/dovecot/pop3-login > login_max_processes_count: 12 > mail_privileged_group: mail > mail_executable(default): /usr/lib/dovecot/imap > mail_executable(imap): /usr/lib/dovecot/imap > mail_executable(pop3): /usr/lib/dovecot/pop3 > mail_plugin_dir(default): /usr/lib/dovecot/modules/imap > mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap > mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 > pop3_uidl_format(default): > pop3_uidl_format(imap): > pop3_uidl_format(pop3): %08Xu%08Xv > auth default: > mechanisms: plain login > passdb: > driver: pam > userdb: > driver: passwd > socket: > type: listen > client: > path: /var/spool/postfix/private/auth > mode: 432 > user: postfix > group: postfix -- Glenn English

4 9

[Dovecot] LDA/Sieve and vacation: empty envelope sender
by Roberto Puzzanghera 10 Jul '11

10 Jul '11

Hello everyone, while testing a vacation/reject sieve rule I get: lda(sender(a)mydomain.xyz): Error: sieve: envelope sender address '<>@mail.domain.xyz' is unparsable follows an empty Return-Path: <"<>"@mail.domain.xyz> and the reject of the message itself by the recipient's MTA (syntax error). Unfortunately I had no luck when googling for similar issues, after a couple of hours of debugging. qmail/vpopmail dovecot 2.0.12 pigeonhole-0.2.3 Thanks in advance for any hint Roberto Puzzanghera

1 0

[Dovecot] OATH/OTP?
by Cor Bosman 10 Jul '11

10 Jul '11

Hey all, has anyone ever successfully implemented some form of OTP system with dovecot? Im looking at setting up an OATH/HOTP-TOTP based OTP for our services, but the webmail service (which uses dovecot) is a difficult one. Any info on implementations would be appreciated, Regards, Cor

1 0

[Dovecot] SASL
by Friedrich Locke 09 Jul '11

09 Jul '11

Dear list members, i am looking for a pop3 server and would like to know dovecot pop3 closer. In my current infra structure all my users have a single login and one password. I have been authenticating unix, web, ldap, smtp against saslauthd server. It is possible to have dovecot pop3 authenticate by contacting saslauthd too ? Another question: All my user information are keeped inside LDAP using qmail.schema. Can dovecot pop3 look into ldap an return information about user mail directory, etc .... ? Thanks in advance.

2 5

[Dovecot] IMAP not working remotely
by Ondřej Bouda 09 Jul '11

09 Jul '11

Hello, I am trying to set up Dovecot 2.0.9 on Fedora 14. The problem I would like to ask for resolution is that IMAP is not working when connecting to the server from another network. More precisely: - POP3 is working entirely OK, - IMAP is working OK when clients are connecting using local network addresses, like 192.168.0.100, - when a client connects from outside, thus using remote IP address, or even from the server itself using the remote IP address of the server, the following happens: the client correctly connects, but the server sends no greeting (neither the configured login_greeting nor the server IMAP capabilities) and does not respond to the commands. In the server log, I get the following record a while after trying to connect (and actually trying to login): Jul 08 23:24:16 imap-login: Info: Disconnected: Inactivity (no auth attempts): rip=<remote-server-address>, lip=192.168.0.100 Both routing and firewall are OK. The client really connects to dovecot (hence the log message), as seen from a telnet session: Trying a.b.c.d... Connected to example.tld (a.b.c.d). Escape character is '^]'. (and then nothing else) The most confusing for me is the fact that POP3 is configured quite the same and works fine, as well as IMAP on the local network. I tried to change address in the inet_listener imap configuration, but if a wrong address setting was the cause, the client would not get connected at all. As I have spent a pretty long time unsuccessfully searching for a cause, I am asking for some help. Thanks for your time, Ondrej Bouda dovecot -n output follows: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35.11-83.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) ext4 auth_mechanisms = plain login cram-md5 digest-md5 ntlm disable_plaintext_auth = no first_valid_gid = 502 first_valid_uid = 502 last_valid_gid = 502 last_valid_uid = 502 log_path = /var/log/dovecot login_greeting = Welcome mail_location = maildir:/var/mail/virtual/%d/%n passdb { args = scheme=plain username_format=%u /etc/dovecot/passwd driver = passwd-file } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = dovecot-auth } service imap-login { inet_listener imap { address = * port = 143 } } service pop3-login { inet_listener pop3 { address = * port = 110 } } ssl = no userdb { args = username_format=%u /etc/dovecot/passwd driver = passwd-file } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv }

1 1

[Dovecot] auth_username_chars question
by Linda Walsh 09 Jul '11

09 Jul '11

I notice there is a space after the = in the default setting: #auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ Is that space part of the syntax or required? If not, does that mean 'space' is included in the default list of allowed characters? If not, then is the space after the '=' required? -- If not, the implication would seem to be that space is 'ignored'. If that's the case, how does one include 'space' in the list of allowed characters? Also, how does one include the "\" character in the list of allowed characters? I.e. is anything accepted, literally, after the first non-space char after the '=' sign? I.e. any spaces after the first non-space char would be taken as valid character, and '\' would also be a literal character? (not that'd I'd be using windows's clients or anything that would, on occasion, pass "DOMAINAME\user" as the calling user trying to log into a 'user' account....or anything....*ahem*...) Overrode it w/some hard-coded hacks, but would like dovecot to me more robust and handle weird input and do the right thing with it (I know that's always a challenging concept for some people, since the answers and ability to arrive at 'correct' is always 'contextual', and so many people want absolute rules that apply all the time in all cases, but...I think thats a diagnosable psychological condition ;-) ).

1 0

[Dovecot] dovecot-auth: gkr-pam: error looking up user information for: IP ?
by babajaga 08 Jul '11

08 Jul '11

I am receiving a lot of error messages dovecot-auth: gkr-pam: error looking up user information for: <user> Unfortunately, I do not see the IP of the remote client, trying to break in. Is there any possibility to get it ? Would be useful to block the IP. -- View this message in context: http://old.nabble.com/dovecot-auth%3A-gkr-pam%3A-error-looking-up-user-info… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] How users subscribe to a shared mailbox ?
by Frank Bonnet 08 Jul '11

08 Jul '11

Hello I have MBOX format mailboxes and would like to build some shared mailboxes for some groups of users. I've read the doc and I think I've understood the concept but ... how my users will subscribe to the shared mailbox I build for them ? Thanks

1 0

[Dovecot] Info: Disconnected: IMAP session state is inconsistent, please relogin
by Frank Bonnet 08 Jul '11

08 Jul '11

hello again I have those messages for ONE user the IMAP folders are accessed by several clients at the same time ( this is a special account used by several people ) Thanks for any infos

1 0

[Dovecot] redirect IMAP --> IMAPS
by Frank Bonnet 08 Jul '11

08 Jul '11

Hello Is it possible to configure Dovecot (2) to "redirect" IMAP connexions to IMAPS ? I know it would be possible with ipfw on the server but I wonder if dovecot has such capability. thanks

2 1

[Dovecot] Possible bug in shared namespace variable?
by Tom Clark 08 Jul '11

08 Jul '11

As you would have seen earlier I've created a shared mailbox with the following namespace: namespace { type = shared separator = . prefix = Shared.%%n. location = maildir:/var/vpopmail/domains/%%d/%%n/Maildir:INDEX=~/Maildir/Shared/%%n subscriptions = no list = children } This works perfectly, but for some reason the %%n variable in the location maildir is blank. Everywhere else %%n is used works (e.g. the prefix and INDEX). This means for the shared mailbox under support(a)mailbox.com I get a folder Mailder in the domain folder: /var/vpopmail/domains/mailbox.com/Maildir instead of /var/vpopmail/domains/mailbox.com/support/Maildir. Has anyone else come across this?

1 0

[Dovecot] Shared mailbox not showing in list
by Tom Clark 08 Jul '11

08 Jul '11

I've setup a shared folder on my server which isn't showing in the list command for the user it's shared with. Can someone help? I have done everything correctly I believe. The user sharing their mailbox is support@, while I'm the user being shared with, tom@ namespace { type = shared separator = . prefix = Shared.%%u. location = maildir:%%h/Maildir:INDEX=~/Maildir/Shared/%%u subscriptions = no list = children } mail_plugins = acl protocol imap { mail_plugins = $mail_plugins imap_acl } plugin { acl = vfile } # Support for multiple domains plugin { acl_shared_dict = file:/var/vpopmail/domains/%d/shared-mailboxes } This what is in the dict file says: shared/shared-boxes/user/tom@mailbox.com/support@mailbox.com When running a GETACL as support(a)mailbox.com I get: 3 getacl Support * ACL "Support" "tom(a)mailbox.com" lr "support(a)mailbox.com" lrwstipekxacd 3 OK Getacl completed. However when I do a LIST "" * as tom(a)mailbox.com It doesn't have any mention of the Shared maildir. * LIST (\HasChildren) "." "Sent" * LIST (\HasNoChildren) "." "Sent.Drafts" * LIST (\HasNoChildren) "." "Sent Messages" * LIST (\HasNoChildren) "." "Trash" * LIST (\HasChildren) "." "INBOX"

1 1

[Dovecot] Trash handling?
by Mason Loring Bliss 07 Jul '11

07 Jul '11

Hello, all. I've recently switched over to Dovecot from a long stretch of using Courier IMAP, and there's one thing I don't have working that I'd quite like. With Courier I had a magic trash folder in which things I deleted would live for a specified amount of time, after which they'd be deleted. I see how to get the expiry behaviour I want, but not the magic saving-to-mailbox functionality. lazy_expunge looks similar but not precisely what I want. Is there a default way to get expunged messages moved to a different mailbox but not a different namespace? Thanks in advance for clues. -- Mason Loring Bliss mason(a)blisses.org Ewige Blumenkraft! (if awake 'sleep (aref #(sleep dream) (random 2))) -- Hamlet, Act III, Scene I

1 0

[Dovecot] passdb/userdb via UNIX socket?
by Peter Mogensen 07 Jul '11

07 Jul '11

Hi, I've been running some performance tests - especially delivery (LDA and LMTP) and it seems there's room for improvement. At least it would be nice to get rid of the fork() and pipe to deliver LDA and the fork of the checkpasswd script for userdb lookup. I've tried LMTP to not fork deliver (*), but checkpasswd still takes time (ok, maybe because it's written on perl as of now). But I was wondering, why there's no passdb/userdb plugin for talking to a local authentication daemon over a UNIX socket? Have I missed something? Is there a thirdparty patch for this? /Peter *: Using Postfix "virtual" LDA seems much faster than asking Postfix to pipe data to "deliver". ... but then of course, I get no dovecot indexing by the LDA.

1 0

[Dovecot] Sieve scripts not run
by Veikko "Wexi" Skurnik 07 Jul '11

07 Jul '11

Hi I have a dovecot/postfix mail server with virtual user and LDAP authentication but for some reason the sieve scripts in user's maildirs are not run. Here's my dovecot -n: # 2.0.13: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.38-8-server x86_64 Ubuntu 11.04 auth_debug_passwords = yes auth_mechanisms = plain login auth_username_format = %Ln auth_verbose = yes base_dir = /var/run/dovecot/ first_valid_gid = 120 first_valid_uid = 111 hostname = mail.websovellukset.fi log_path = /var/log/dovecot.log login_greeting = Omnibyte Dovecot ready. mail_debug = yes mail_gid = vmail mail_location = /var/vmail/%n mail_uid = vmail maildir_stat_dirs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = maildir:User quota quota_rule = *:storage=2G quota_rule2 = Trash:storage=+200M sieve = /var/vmail/%n/dovecot.sieve sieve_dir = /var/vmail/%n/sieve } postmaster_address = postmaster(a)websovellukset.fi protocols = imap pop3 lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = postfix mode = 0600 user = postfix } user = $default_internal_user } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 0 service_count = 1 } service imap { process_limit = 1024 vsz_limit = 256 M } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 0 service_count = 1 vsz_limit = 64 M } ssl_cert = </etc/ssl/certs/websovellukset.crt ssl_key = </etc/ssl/private/websovellukset.key ssl_key_password = 0mn1p4ssu userdb { args = /usr/local/etc/dovecot/dovecot-ldap-userdb.conf.ext driver = ldap } protocol lda { mail_plugins = " sieve" } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags imap_id_log = * imap_id_send = * imap_idle_notify_interval = 2 mins imap_logout_format = bytes=%i/%o imap_max_line_length = 64 k mail_max_userip_connections = 10 mail_plugins = } protocol sieve { mail_max_userip_connections = 10 managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_line_length = 65536 } I can telnet to the Managesieve server and it also works with Roundcube but whatever the sieve script contains, nothing happens. I've also looked into the logs but cannot find any errors related to this... TIA Wexi -- * Veikko "Wexi" Skurnik: +358(44)5288338 * * wexi(a)wexin.net Wexi@IRCNet wexi79@skype * * Rudolf Koivun tie 191 38250 Sastamala * * "Kosminen balanssi ei saa järkkyä" *

2 2

Re: [Dovecot] Patch for vpopmail roaming users support
by Nicolas Croiset (Campus Grenoble 90,8) 07 Jul '11

07 Jul '11

Hi Matt, I try on my setup the patch you made last month and the /home/vpopmail/etc/open-smtp leaves empty. If I go back with the vpopmail mode, it is working. I don't understand what's happened really. Bye. -- +------------------------------------------------------------+ | E-mail : Nicolas.Croiset(a)brume.org | | Annuaire des radios AM/FM/DMB : http://www.annuradio.fr/ | +------------------------------------------------------------+

1 0

[Dovecot] Logging a special message into Dovecot source code
by Meisam Navaki 06 Jul '11

06 Jul '11

Hi, I wanna modify Dovecot source code.For that,I need to know how can we log a special message into Dovecot source code? I tried to write a function to write a message in a file and added it to Dovecot source code,but it didn't work. I'm wondering if we can use Dovecote logging functions,but I don't know what are those functions and how can we use them. Thanks in advance. -- *Regards Meisam Navaki Arefi, * *System Programmer, * ** *Bayan Co. * * *

2 2

[Dovecot] Public Mailbox & ACLs
by Tom Clark 06 Jul '11

06 Jul '11

Hi, I'm having a problem I can't get my head around. I'm trying to setup a public mailbox that is hidden from all users unless granted access through an ACL. My folder structure is (migrated from a Courier IMAP/Qmail server): /var/spool/maildir - main public folder (contains a few .qmail files to redirect mail to the correct subfolder) /var/spool/maildir/Support - support public folder (a public folder rather than a maildir) /var/spool/maildir/Support/.SubFolder1 - support sub folder 1 (a maildir) /var/spool/maildir/Support/.SubFolder2 - support sub folder 2 (another maildir) /var/spool/maildir/System /var/spool/maildir/System/.SubFolder1 /var/spool/maildir/System/.SubFolder2 I couldn't get the namespace working correctly to just have 1 folder called "Shared" (you just got an empty folder when trying to subscribe). I ended up making 2 namespaces below: namespace { type = public separator = . prefix = Shared.Support. location = maildir:/var/spool/maildir/Support:INDEX=~/Maildir/Support subscriptions = no } namespace { type = public separator = . prefix = Shared.System. location = maildir:/var/spool/maildir/System:INDEX=~/Maildir/System subscriptions = no } This allowed me to get the result I was looking for. Using an ACL I get a Shared->Support/System->Subfolders view. However the problem is when a user is not in the ACL they can still see the Shared->Support/System folders (just none of the subfolders) and obviously can't subscribe. Could someone let me know what I am doing wrong and if there is a better way of doing this? Many thanks, Tom

2 8