- dovecot - dovecot.org

[Dovecot] Baffled after upgrade
by Bert Todger 02 Jun '11

02 Jun '11

Hello all, I have just upgraded my Fedora 13 system to F15. With it came a shiny new dovecot 2.0.13 (Details of dovecot -n below). The configuration is different from the dovecot 1.something that I had been used to with F13, but I managed to get it working and all was well... Without changing anything related to dovecot (as far as I know), after a reboot, dovecot stopped working. I did a bit of digging, upped the verbosity of logging and found this in the logs: =======8<================================================================= Jun 02 09:58:21 auth: Debug: passwd-file /etc/passwd.dovecot: Read 3 users Jun 02 09:58:21 auth: Debug: auth client connected (pid=16699) Jun 02 09:58:21 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=192.168.2.2 rip=192.168.2.2 lport=993 rport=33960 Jun 02 09:58:21 auth: Debug: client out: CONT 1 Jun 02 09:58:21 auth: Debug: client in: CONT 1 AG1hcmsAaWxIYWFkSFA= Jun 02 09:58:21 auth: Debug: Loading modules from directory: /usr/lib/dovecot/auth Jun 02 09:58:21 auth: Debug: Module loaded: /usr/lib/dovecot/auth/libauthdb_ldap.so Jun 02 09:58:21 auth: Debug: Module loaded: /usr/lib/dovecot/auth/libdriver_sqlite.so Jun 02 09:58:21 auth: Debug: Module loaded: /usr/lib/dovecot/auth/libmech_gssapi.so Jun 02 09:58:21 auth: Debug: passwd-file /etc/passwd.dovecot: Read 3 users Jun 02 09:58:21 auth: Debug: pam(mark,192.168.2.2): lookup service=dovecot Jun 02 09:58:21 auth: Debug: pam(mark,192.168.2.2): #1/1 style=1 msg=Password: Jun 02 09:58:23 auth: Info: pam(mark,192.168.2.2): pam_authenticate() failed: Authentication failure (password mismatch?) (given password: mypass) Jun 02 09:58:23 auth: Debug: passwd-file(mark,192.168.2.2): lookup: user=mark file=/etc/passwd.dovecot Jun 02 09:58:23 auth: Debug: client out: OK 1 user=mark Jun 02 09:58:23 auth: Debug: master in: REQUEST 1125646337 16699 1 69152b70b5461508ad2a3eb02942b883 Jun 02 09:58:23 auth: Debug: passwd(mark,192.168.2.2): lookup Jun 02 09:58:23 auth: Debug: master out: USER 1125646337 mark system_groups_user=mark uid=500 gid=500 home=/home/mark Jun 02 09:58:23 imap-login: Info: Login: user=<mark>, method=PLAIN, rip=192.168.2.2, lip=192.168.2.2, mpid=16705, TLS =========8<=============================================================== Now it's entirely possible that I simply don't properly understand the password authentication process. I have PLAIN passwords set in /etc/passwd.dovecot which it seems to be reading OK, my /etc/dovecot/conf.d/auth-passwdfile.conf.ext file contains just =========8<============================================= passdb { driver = passwd-file args = scheme=PLAIN username_format=%u /etc/passwd.dovecot } =========8<============================================= and nothing else. ...and as I said - it *was* working fine. I am puzzled by the reference to PAM authentication in the logs and in the dovecot -n output. Should I comment out all references to PAM? (in auth-system.conf.ext?) I and my family access mail through a variety of means, using Evolution on the home network, mobile devices (eg iPhone), webmail (using squirrelmail configured to access dovecot) and over ssh (using mutt). I don't necessarily want my (or their) email passwords to be the same as our PAM logon passwords (and at the moment they're not). So for me PLAIN has been the best solution up until now. What is my best (and simplest) solution? Thanks in advance Mark # dovecot -n # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38.6-27.fc15.i686.PAE i686 Fedora release 15 (Lovelock) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain log_path = /var/log/dovecot mbox_write_locks = fcntl passdb { driver = pam } passdb { args = scheme=PLAIN username_format=%u /etc/passwd.dovecot driver = passwd-file } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd }

2 1

[Dovecot] DOVECOT v2.0.11 using SIEVE not working
by Matt Mc Namara 02 Jun '11

02 Jun '11

Hi, I'm trying to get sieve working with dovecot. I seem to have everything enabled but my scripts done seem to work. both sieve-filter (2000) and sieve (4190) are running along with pop3 and imap. I have a simple script which checks the email address and moves it to a folder. I'm at a loss as to what to check next. Thanks in advance, Matt

5 10

[Dovecot] Unknown setting: dbox_attachment_dir
by imap＠tnde.org 01 Jun '11

01 Jun '11

Hi, I am trying to set up Dovecot with sdbox and sis (single instance storage of attachments), however I get the following error when attempting to start dovecot: Starting Dovecot Imap: doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 89: Unknown setting: dbox_attachment_dir I'd appreciate help on getting this up and running. This is a virtual (for the time being) server, running Centos, and Dovecot 2. [root@localhost ~]# dovecot --build-options Build options: ioloop=epoll notify=inotify ipv6 openssl io_block_size=8192 Mail storages: cydir maildir mbox mdbox raw sdbox shared SQL driver plugins: mysql postgresql sqlite Passdb: checkpassword ldap pam passwd passwd-file shadow sql Userdb: checkpassword ldap(plugin) nss passwd prefetch passwd-file sql [root@localhost ~]# dovecot -n # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-238.9.1.el5 x86_64 CentOS release 5.6 (Final) auth_debug = yes auth_debug_passwords = yes auth_verbose = yes disable_plaintext_auth = no mail_location = sdbox:~/dbox mbox_write_locks = fcntl passdb { driver = pam } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd }

2 2

[Dovecot] Client IP log variable for proxy/director setups?
by Kelsey Cummings 01 Jun '11

01 Jun '11

Timo - it would be very convenient if we could get a variable that held the real client ip for use in logging with director/proxy setups. It's clearly already passed around in client->user->remote_ip but at this point, I don't see anyway to get it into the logs and it would take me ages to figure out the Right place to add it since client->user doesn't seem to be available in client-common.c: get_var_expand_table(..). Perhaps I'm missing something obvious? -- Kelsey Cummings - kgc(a)corp.sonic.net sonic.net, inc. System Architect 2260 Apollo Way 707.522.1000 Santa Rosa, CA 95407

1 1

[Dovecot] Help needed on dovecot 2.0.13
by गौरव जोशी 31 May '11

31 May '11

Hi, We have just installed dovecot version 2.0.13 on our server. while load testing we get below error in logs. May 30 19:57:19 [My Server]dovecot: imap-login: Error: read(imap) failed: Connection reset by peer May 30 19:57:19 [My Server] dovecot: imap-login: Internal login failure (pid=25816 id=1) (auth failed, 1 attempts): Please help as we want to use this on live environment and if these tests fails we can not move this server into live structure. Have a nice time, Gourav Joshi Have a look at www.linuxquestions.in

2 1

[Dovecot] PAM config problem...
by Juan Bernhard 30 May '11

30 May '11

Hi, I had some troubles with PAM configuration. I need to restrict imap access to some users (and allow pop3 to all). I followed the wiki example of using "args = %s" to use 2 pams configurations (one for imap and another for pop3) When I start the service, it starts, but when I try to auth its hangs Here is the log: May 26 15:16:09 claudia dovecot: master: Warning: Killed with signal 15 (by pid=15424 uid=0 code=kill) May 26 15:16:10 claudia dovecot: master: Dovecot v2.0.13 starting up May 26 15:16:24 claudia dovecot: auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth May 26 15:16:24 claudia dovecot: auth: Fatal: pam: Unknown setting: %s May 26 15:16:24 claudia dovecot: master: Error: service(auth): command startup failed, throttling May 26 15:16:59 claudia dovecot: pop3-login: Error: Timeout waiting for handshake from auth server. my pid=15435, input bytes=0 Is this option working? Im I missing somethin? I had the same proble in Solaris (but i thought that was a solaris thing, solaris is ALWAYS diferent) here is my doveconf -n # 2.0.13: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-238.9.1.el5 x86_64 CentOS release 5.6 (Final) ext3 auth_cache_size = 10 M auth_debug = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no listen = * login_greeting = Server ready. mail_debug = yes mail_location = maildir:/var/mail/%u:INDEX=~/ mail_plugins = quota passdb { args = %s failure_show_msg=yes driver = pam } plugin { quota = maildir:Cuota de correo quota_rule = *:storage=1G quota_rule2 = Trash:storage=+100M } protocols = imap pop3 ssl = no ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags mail_plugins = quota imap_quota } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_lock_session = yes pop3_uidl_format = %08Xv%08Xu } And the build options: Build options: ioloop=epoll notify=inotify ipv6 openssl io_block_size=8192 Mail storages: cydir maildir mbox mdbox raw sdbox shared SQL drivers: Passdb: checkpassword ldap pam passwd passwd-file shadow Userdb: checkpassword ldap nss passwd prefetch passwd-file Thanks, Juan.

2 2

[Dovecot] OT: DNS-Problem with Mailnglist-Server
by Hanns Mattes 30 May '11

30 May '11

Hi, is there a problem with the server, which is running this list, or do I have an issue with my DNS-server? mail:/ # host 193.210.130.67 Host 67.130.210.193.in-addr.arpa. not found: 3(NXDOMAIN) which leads to postfix complaining: May 30 13:28:39 mail postfix/smtpd[25014]: NOQUEUE: reject_warning: RCPT from unknown[193.210.130.67]: 450 4.7.1 Client host rejected: cannot find your reverse hostname, [193.210.130.67]; from=<dovecot-bounces(a)dovecot.org> to=<hanns(a)hannsmattes.de> proto=ESMTP helo=<dovecot.org> Regards Hanns

6 8

[Dovecot] recipient delimiters and virtual users
by Nick Edwards 30 May '11

30 May '11

Is there a known workaround for users who want to use the old recipient delimiter plus sign method of sorting their mail? eg: foo.bat +dovecot(a)example.com <foe.blow%2Bdovecot(a)example.com> This does not work with postfix/dovecot, but if we tell postfix/system-passwd to use the recipient_delimiter = + it works just like I recall sendmail did, but we no longer use local users only virtual dovecot LDA w/mysql. postfix appears to accept it testing by telnet, but then the message gets a new DSN generated saying no user, so dovecot LDA must not work by default with this. Postfix 2.8.3 Dovecot 1.2.17 MySQL 5.5.12 our postfix master.cf is dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/libexec/dovecot/deliver -e -d ${recipient}

3 5

[Dovecot] Email being stored in "cur" folder and not being downloaded in Thunderbird
by Jay Welch 27 May '11

27 May '11

Hi, I have recently noticed that a random number of emails are being stored in the "cur" folder under certain users and cannot be downloaded in Thunderbird. I have tried moving the emails from "cur" to "new" but everytime I try to download the email from Thunderbird, the emails go back to the "cur" folder. What could be causing this? What is the "cur" folder used for? I had thought that the "cur" folder was used for IMAP but all the users here are using POP. Also, I have tried testing this on Outlook and Outlook seems to download the files from "cur". Thanks

2 1

[Dovecot] Bug report: Panic: Trying to sync mailbox archive with open transactions
by Erik Hetzner 26 May '11

26 May '11

Hi, I am getting the following error trying to search a virtual folder. May 26 11:35:29 xam dovecot: imap(egh): Panic: Trying to sync mailbox archive with open transactions May 26 11:35:29 xam dovecot: imap(egh): Error: Raw backtrace: /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(+0x39ce1) [0xd2dce1] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(+0x39d4f) [0xd2dd4f] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xd0485e] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot-storage.so.0(+0x24dd6) [0xf5add6] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/lib20_virtual_plugin.so(virtual_storage_sync_init+0x80f) [0x4a1a7f] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x39) [0xf5ada9] -> dovecot/imap(imap_sync_init+0x54) [0x805df74] -> dovecot/imap(cmd_sync_delayed+0x1bc) [0x805ecdc] -> dovecot/imap(client_handle_input+0x21a) [0x805658a] -> dovecot/imap(client_input+0x5f) [0x8056daf] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x51) [0xd3b681] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xd3) [0xd3c8b3] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0xd3b600] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(master_service_run+0x2a) [0xd26e1a] -> dovecot/imap(main+0x32d) [0x805f99d] -> /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x808e37] -> dovecot/imap() [0x804e131] May 26 11:35:29 xam dovecot: master: Error: service(imap): child 18403 killed with signal 6 (core dumps disabled) As you can see, I am using fts_solr plugin. the virtual mailbox is pretty simple: INBOX * -spam -Trash -trash -drafts My client is Wanderlust. Let me know any other information I can provide. Thank you! best, Erik Hetzner Sent from my free software system <http://fsf.org/>.

1 0

[Dovecot] Dovecot imaptest on RHEL4/GFS1, RHEL6/GFS2, NFS and local storage results
by Aliet Santiesteban Sifontes 26 May '11

26 May '11

We have done some benchmarking tests using dovecot 2.0.12 to find the best shared filesystem for hosting many users, here I share with you the results, notice the bad perfomance of all the shared filesystems against the local storage. Is there any specific optimization/tunning on dovecot for use GFS2 on rhel6??, we have configured the director to make the user mailbox persistent in a node, we will thank's any help from you. we are interested in using GFS2 or NFS, we believe the problem is the locks, how can we improve this?? best regards, Aliet The results rhel 4.8 x86_64/GFS1 two nodes, shared FC lun on a SAN Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 2608 1321 1311 2608 2508 3545 547 2001 2493 2702 5282 2- 2810 1440 1430 2810 2688 3835 403 2154 2679 2925 5706 3- 2913 1457 1441 2908 2778 3913 417 2253 2773 3034 5924 4- 2814 1448 1412 2812 2695 3910 401 2186 2686 2929 5712 5- 2789 1464 1432 2787 2652 3774 427 2112 2649 2879 5676 6- 2843 1460 1444 2839 2722 3948 422 2164 2713 2957 5778 rhel6 x86_64/GFS2 two nodes, shared FC lun on a SAN(Used RDM in VMWare vSphere for GFS2 lun) Tunned cluster suite cluster.conf + <dlm plock_ownership="1" plock_rate_limit="0"/> <gfs_controld plock_rate_limit="0"/> Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 2730 1340 1356 2704 2644 3748 522 2125 2643 2662 5422 2- 3309 1618 1659 3294 3223 4658 531 2563 3221 3239 6596 3- 2131 1046 1017 2055 2025 2911 381 1608 2024 2052 4256 4- 2176 1055 1039 2082 2058 2947 377 1671 2058 2078 4344 5- 1859 928 931 1859 1800 2626 304 1454 1799 1801 3706 6- 2672 1322 1329 2672 2607 3758 464 2097 2606 2615 5326 rhel6 x86_64/GFS2 two nodes, shared FC lun on a SAN(Used RDM in VMWare vSphere for GFS2 lun) Cluster suite defaults configs for plocks Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 1417 644 676 1325 1305 1872 308 1048 1302 1318 2824 2- 837 378 392 742 726 1050 117 588 722 734 1658 3- 803 363 347 752 745 1069 153 597 744 750 1658 4- 1682 802 811 1587 1569 2261 291 1299 1569 1585 3360 5- 1146 583 564 1146 1037 1500 213 811 1037 1049 2290 6- 838 403 366 744 734 1057 152 561 731 736 1664 rhel6 x86_64 two nodes used NFS(NAS Freenas 0.8, nfsvers 3) Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 1382 699 691 1357 1063 1500 224 861 1053 1313 2694 2- 1634 785 799 1610 1459 2120 311 1192 1451 1570 3204 2- 1635 826 806 1611 1463 2088 345 1159 1459 1568 3190 3- 1574 758 781 1537 1403 2060 324 1135 1396 1504 3090 4- 1685 842 807 1653 1506 2135 349 1215 1504 1634 3344 5- 1766 850 893 1737 1582 2289 335 1288 1579 1705 3480 6- 1597 797 769 1572 1423 2007 313 1133 1420 1536 3142 rhel6 x86_64 local storage Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 7798 3868 3889 7706 7566 10713 1080 6089 7559 7688 15562 2- 7806 3879 3874 7716 7585 10873 1114 6018 7578 7696 15572 3- 7866 3910 3855 7773 7748 11053 1076 6253 7747 7761 15710 4- 7893 3978 3931 7802 7772 10988 1117 6197 7767 7789 15760 5- 7775 3853 3809 7683 7654 10897 1081 6142 7651 7675 15534 6- 7877 3919 3872 7789 7758 10986 1085 6218 7755 7773 15720

4 10

[Dovecot] Moving maildir mailboxes
by Willie Gillespie 26 May '11

26 May '11

I am using Maildir with Dovecot 1.2. (Config available if needed, but should be a simple question.) I have a bunch of mail that I would like to do a one-time move from a private namespace to a shared namespace. The namespaces are already set up, etc. Can I just move the folders to their new location? I am not merging with existing folders, they would be new subfolders. Thanks! - Willie

2 1

[Dovecot] 2.0.12 (fa2e92526716): Deleting mails and folders from public namespaces
by Binarus 26 May '11

26 May '11

Hello, we basically run a dovecot imap setup where users' mailboxes are in private namespaces (as usual), but there is a public namespace with several thousand deeply nested folders also. The client we use is Thunderbird 3. The public namespace shows up in each user's account at the top level (i.e. same level as Inbox, Sent and so on), and users can make new subfolders in the public namespace, copy mails to it and so on. So, our setup basically works. But whenever a user tries to delete a folder from the public namespace, dovecot gives the following error: "Renaming not supported across non-private namespaces". I think I have a grasp why this happens (Thunderbird tries to move the folder from the public namespace into the trash folder (private namespace) of the user who does the deletion), and I also have read Timo's statement that he does not plan to support such renaming due to big problems he is seeing with it. Nevertheless, since deleting a folder from a public archive is not a too uncommon thing, I wanted to ask how other people have solved that. It came to my mind to configure Thunderbird to immediately delete folders and messages (instead of moving them to trash folder). I have tested that, and it worked, but is somehow dangerous and unsatisfying. Furthermore, I haven't completely understood the reason for the different behaviour of folders in the public namespace and a single message therein. If I configure Thunderbird to use the trash folder, users can delete messages from the public namespace, i.e. Thunderbird can move messages from the public namespace to the private trash folder of the respective account. This is obviously not true for folders (even if they are empty). What's the difference between an empty folder and a single message in this respect? Is it really the ACL thing which makes folders so difficult to handle opposed to single messages? Thank you very much for any ideas! Regards, Peter ************ dovecot -n: # 2.0.12 (fa2e92526716): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 auth_verbose = yes auth_verbose_passwords = sha1 first_valid_uid = 103 maildir_copy_with_hardlinks = no namespace { hidden = no inbox = yes list = yes location = maildir:/home/vmail/content/users/%u:INDEX=/home/vmail/index/users/%u prefix = separator = / subscriptions = yes type = private } namespace { hidden = no inbox = no list = yes location = maildir:/home/vmail/content/archive:INDEX=/home/vmail/index/archive prefix = Archive/ separator = / subscriptions = yes type = public } passdb { args = scheme=SSHA username_format=%u /etc/dovecot/users driver = passwd-file } plugin { acl = vfile } protocols = " imap" service auth { user = root } service imap-login { inet_listener imap { port = 0 } inet_listener imaps { address = 192.168.20.140 port = 993 ssl = yes } } ssl_cert = </etc/dovecot/imap-ssl.home.omeganet.de.crt ssl_key = </etc/dovecot/imap-ssl.home.omeganet.de.key userdb { args = uid=vmail gid=vmail home=/home/vmail/content/users/%u driver = static } protocol imap { mail_plugins = acl imap_acl }

3 4

[Dovecot] Per user Namespaces From SQL
by Henrique Fernandes 26 May '11

26 May '11

Hello folks, i am lookign in the wiki, but did not find anything very clear about what i want. I need to have namespace for each user from mysql. But like, i need all configruation comming from mysql, not only the location. Is that possible? here: http://wiki2.dovecot.org/Namespaces at section: Per-user Namespace Location From SQLI can set the location, is there an way to make everything ? Like the name of namespace, and etc ? Thanks to all! []'sf.rique

2 1

[Dovecot] v1.1.20 vs v1.2 & v2.0
by Adam 25 May '11

25 May '11

I am currently running v1.1.20 and was wondering if there is any compelling reason to upgrade to v1.2 or v2.0? For example is there any security updates in v1.2 or v2.0 that aren't included in v1.1.20? The other major thing I would be interested in knowing is there any speed enhancements in the newer versions? I am using basic PAM Auth and Maildir mailboxes on a Linux box. Let me know if you need any more information to answer my questions. Thanks, Adam

4 4

[Dovecot] problems with debian 5.0 and thunderbird
by Steven Jones 25 May '11

25 May '11

Hi, Does anyone have a setup guide for Thunderbird and Dovecot on Debian please? Dovecot is 1.0.15 I have Dovecot running listening on 143 and I can telnet from the XP guest but Thunderbird cant or wont talk to it. I have taken the # off listen and I get a telnet reply, no firewall is configured.... Ive set thunderbird up lots so I suspect its not Thunderbird but a dovecot config I have wrong. regards

2 1

[Dovecot] libwrap does it work on in 2.0?
by a.smith＠ukgrid.net 24 May '11

24 May '11

Hi, I noticed recently that libwrap (TCP Wrappers) is supported, although disabled by default, in the current Dovecot 2.0 but doesn't seem to be mentioned anywhere on the wiki. Is this working well/at all? Anyone care with experience using this care to share their experiences? My OS is FreeBSD, I noticed on some Linux distributions there may be issues, but this won't affect my installation. thanks Andy.

1 0

[Dovecot] Dovecot 2 and Expire plugins : doesn't have record in DB
by San San 24 May '11

24 May '11

Dovecot 2 and Expire plugins : doesn't have records in db Hide Details FROM: * San San TO: * dovecot(a)dovecot.org Message flagged Tuesday, May 24, 2011 1:09 PM Dear Dovecot I have already config dovecot server with 2.0.13, and I need to enable expire plugins (in dovecot1 I have already used) but I see in my db doesn't have any record how about to debug or trace to solve this problem doveconf -n : auth_verbose = yes default_internal_user = vmail dict { expire = mysql:/usr/local/etc/dovecot/dovecot-dict-expire.conf } disable_plaintext_auth = no first_valid_gid = 200 first_valid_uid = 200 last_valid_gid = 200 last_valid_uid = 200 login_greeting = mail ready. mail_gid = vmail mail_location = maildir:~/Maildir mail_nfs_storage = yes mail_plugins = expire mail_uid = vmail maildir_very_dirty_syncs = yes namespace { hidden = no inbox = yes list = yes location = prefix = INBOX. separator = subscriptions = yes type = private } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { autocreate = INBOX.Drafts autocreate2 = INBOX.Sent autocreate3 = INBOX.Trash autocreate4 = INBOX.Spam autosubscribe = INBOX.Drafts autosubscribe2 = INBOX.Sent autosubscribe3 = INBOX.Trash autosubscribe4 = INBOX.Spam expire = INBOX.Trash 15d expire2 = INBOX.Spam 30d expire_dict = proxy::expire quota = maildir quota_rule = INBOX.Trash:storage=+200M } protocols = imap service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 4096 drop_priv_before_exec = no executable = auth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = vmail mode = 0600 user = vmail } unix_listener auth-userdb { group = mode = 0600 user = } unix_listener login/login { group = mode = 0666 user = } user = root vsz_limit = 18446744073709551615 B } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0600 user = vmail } user = $default_internal_user vsz_limit = 64 M } service director { chroot = client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 64 M } service imap-login { chroot = login client_limit = 800 drop_priv_before_exec = no executable = imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = port = 143 ssl = no } inet_listener imaps { address = port = 993 ssl = yes } privileged_group = process_limit = 255 process_min_avail = 10 protocol = imap service_count = 0 type = login user = nobody vsz_limit = 64 M } service imap { chroot = client_limit = 1024 drop_priv_before_exec = no executable = imap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 8 protocol = imap service_count = 1 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 64 M } service lmtp { chroot = client_limit = 0 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 0 } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log user = vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 255 drop_priv_before_exec = no executable = pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = port = 110 ssl = no } inet_listener pop3s { address = port = 995 ssl = yes } privileged_group = process_limit = 255 process_min_avail = 10 protocol = pop3 service_count = 0 type = login user = nobody vsz_limit = 64 M } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } ssl = no userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf driver = ldap } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep mail_max_userip_connections = 200 mail_plugins = quota imap_quota expire autocreate } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %v-%u } protocol lda { postmaster_address = postmaster(a)example.com } and dovecot-dict-expire.conf is connect = host=10.3.1.31 dbname=dovecot user=dovecot password=dovecot # CREATE TABLE expires ( # username varchar(100) not null, # mailbox varchar(255) not null, # expire_stamp integer not null, # primary key (username, mailbox) # ); map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } Sincerely, Nantharat Puwarang

1 0

Re: [Dovecot] How to stop mail_executable from cwd to ~home
by Joseph Tam 24 May '11

24 May '11

Timo wrote: >> As to how to stop the mail process from chdir'ing to a home directory > > If you don't want Dovecot to use a home directory, don't tell it a home directory. I'm all for that since I don't seem to have any need for a home directory. Any idea of how to do it with a passwd-file userdb backend? I also tried to override home directory with userdb { driver = passwd-file args = /etc/passwd home=/bundled/home/$n } but that didn't work out too well. Or is this feature a rephrasing of the current topic thread "Global fields for passwd-file database". Joseph Tam <jtam.home(a)gmail.com>

2 2

[Dovecot] delegation of admin rights
by Ariel Biener 23 May '11

23 May '11

Hello, We're a rather largish university (largest in Israel), with some 60-70k users, using Dovecot 1.2.14 (we're cautious about moving to 2.0.x for now). We need to provide admin rights to faculty computer/IT staff, so they can have access to the mailboxes of their respective users. We use LDAP as an authentication/authorization backend. Currently, dovecot has a "master user" which can access all mailboxes. I am looking for a solution, preferably within dovecot, to create a delegation type of administration, allowing certain users to access the mailboxes of other users based on an LDAP filter or LDAP attribute value. If possible, allowing per protocol access(that is, I would like to give them IMAP access and not POP3) and within IMAP allowing only to view a mailbox, but not to change it, that would be even better. Does anyone on this list know of any IMAP proxy providing such abilities, and also, would the Dovecot team consider this as a candidate for a request for enhancement ? This would be very useful in a delegated administration environment, like most larger organizations, hosting & ISP, and other environments where delegation is an important and very much needed ability. thanks a bunch, -- Ariel -- Ariel Biener e-mail: ariel(a)post.tau.ac.il PGP: http://www.tau.ac.il/~ariel/pgp.html

3 2

[Dovecot] SVN Compilation error
by Joan Moreau 23 May '11

23 May '11

Hi, Here the error I get (SVN) Making all in dns make[3]: Entering directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src/dns' make[3]: Nothing to be done for `all'. make[3]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src/dns' Making all in ipc make[3]: Entering directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src/ipc' MAKE[3]: *** NO RULE TO MAKE TARGET `ALL'. STOP. make[3]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src/ipc' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0' make: *** [all] Error 2

2 1

[Dovecot] Crash test :)
by kjonca＠o2.pl 23 May '11

23 May '11

I'm considering to move my mails from maildir/mbox to mdbox. One of my doubts is: how can I restore my mails when something terrribly wrong happens. I understand that I should use doveadm import "backup_location" "mailbox" all. So I try to import with: doveadm -v import "sdbox:~/Mail/dbox-temp/spamcop/reports/" "#Dbox/spamcop/reports" all #Dbox namespace were defined as: --8<---------------cut here---------------start------------->8--- namespace { hidden = no inbox = no list = yes location = mdbox:~/Mail/Dbox prefix = "#Dbox/" separator = / subscriptions = yes type = private } --8<---------------cut here---------------end--------------->8--- dbox-temp were defined earlier as --8<---------------cut here---------------start------------->8--- namespace { hidden = no inbox = no list = yes location = sdbox:~/Mail/dbox-temp separator = / subscriptions = yes type = private } --8<---------------cut here---------------end--------------->8--- 1. when I specified for example sdbox:~/Mail/dbox-temp/spamcop/reports/ doveadm search mails under ~/Mail/dbox-temp/spamcop/reports/mailboxes/INBOX/dbox-Mails/ - am I missing something from documentation? (I expected rather ~/Mail/dbox-temp/mailboxes/spamcop/reports/dbox-Mails) 2. when I move dbox-Mails to proper place I got: doveadm(kjonca): Error: sdbox /home/kjonca/Mail/dbox-temp/spamcop/reports/mailboxes/INBOX/dbox-Mails: Invalid dbox header size doveadm(kjonca): Error: sdbox /home/kjonca/Mail/dbox-temp/spamcop/reports/mailboxes/INBOX/dbox-Mails: Invalid dbox header size And nothing were imported. Notices: a) there were only u.* files, no indexes. b) u.* files were created on i386 system, and import test on amd64. KJ -- http://blogdebart.pl/2010/03/17/dalsze-przygody-swinki-w-new-jersey/

2 6

[Dovecot] HG Compilation error
by Joan Moreau 23 May '11

23 May '11

Hi, Here the error I get, when compiling from Mercurial repository Making all in ipc make[3]: Entering directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src/ipc' MAKE[3]: *** NO RULE TO MAKE TARGET `ALL'. STOP. make[3]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src/ipc' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/data/admin/src/mail/dovecot2/dovecot-2.0' make: *** [all] Error 2 How to fix that ? thx jm

1 0

[Dovecot] zlib
by Daniel L. Miller 23 May '11

23 May '11

How can I enable zlib for reading compressed messages but not writing? -- Daniel

3 2

[Dovecot] PERMANENTFLAGS response if ACL seen/write rights are missing
by Michael M Slusarz 23 May '11

23 May '11

In dovecot 2.0.13, if a user does not have either s or w ACL rights on a mailbox, PERMANENTFLAGS correctly indicates that the mailbox has not permanent flags: * OK [PERMANENTFLAGS ()] Read-only mailbox. However, if one is set but not the other, the PERMANENTFLAGS list is not being pruned appropriately. For example, for a mailbox with the following flags: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft $Forwarded $Junk) If s is set, but not w, I would expect PERMANENTFLAGS to look like: * OK [PERMANENTFLAGS (\Seen)] If w is set, but not s, I would expect this: * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Draft $Forwarded $Junk \*)] However, in both cases I currently see all flags in the mailbox: * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft $Forwarded $Junk \*)] michael

2 1

[Dovecot] Hide INBOX prefix on shared mailboxes
by Martin Werthmöller 23 May '11

23 May '11

Hello List, We've upgraded our Dovecot system from 1.2.4 to 2.0.12. If someone now accesses an inbox of another user at the shared namespace, the folder will be shown as: shared/martin/INBOX The 1.2 installation has shown the folder like shared/martin Is it possible to achieve the "old" behavior? ** Configuration of the namespaces * dovecot 1.2 namespace private { separator = / prefix = #location defaults to mail_location. inbox = yes } namespace shared { separator = / prefix = shared/%%n location = maildir:%%h:INDEX=~/shared/%%n/ subscriptions = no list = children } * dovecot 2.0 namespace { type = private separator = / prefix = #location defaults to mail_location. inbox = yes } namespace { type = shared separator = / prefix = shared/%%n/ location = maildir:%%h:INDEX=~/shared/%%n subscriptions = no list = children } Best regards, Martin Werthmoeller -- LWsystems GmbH & Co. KG ++ http://www.lw-systems.de/impressum Phone: +49 +5455 932132 ++ Fax: +49 +5455 932099 Your experts for Linux, Open Source and IT security. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ LWsystems GmbH & Co. KG Headquaters: Tegelerweg 11, D-49186 Bad Iburg, Germany Phone +49 (0)5455 932132 fax +49 (0)5455 932099 register of commerce: Amtsgericht Osnabrück, hra 110668 VAT no. DE23852211 Managing Directors: Dipl.-Ing. Ansgar H. Licher, Bad Iburg, Germany Dipl.-Ing. Martin Werthmöller, Ibbenbüren, Germany For further company details please look at: http://www.lw-systems.de/impressum ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

2 1

Re: [Dovecot] dovecot-antispam dependencies
by Sven Schwyn 23 May '11

23 May '11

> I would like to see a tagged version too, but trunk works fine here. > Since the OP mentions Gentoo, my latest ebuild for dovecot-antispam for > 2.x is attached. The thing with Gentoo: Unless a tagged version is created, it's very unlikely that the Gentoo guys update the current ebuild (aka: package) and thus the incompatibility between the dovecot and the dovecot-antispam packages in the package tree remains. Thanks for the ebuild. Cheers, -sven

2 1

[Dovecot] Debian or Ubuntu packages ?
by Frank Bonnet 23 May '11

23 May '11

Hello Anyone knows which version of Dovecot 2 are availables on Squeeze Debian or Ubuntu server 10.04 LTS ? Also what is the Linux OS that is must up to date ? Thanks

2 1

[Dovecot] Global fields for passwd-file database
by Sergey Urushkin 23 May '11

23 May '11

Is there a way to specify global fields for passwd-file DB? Currently interested in "home" for userdb and "allow_nets" for passworddb. The next doesn't work, of course: passdb passwd-file { args = username_format=%n allow_nets=127.0.0.1 /etc/dovecot/dovecot.passwd.%d } userdb passwd-file { args = username_format=%n home=/var/mail/%d/%n /etc/dovecot/dovecot.passwd.%d } -- Best regards, Sergey Urushkin

2 4

[Dovecot] dovecot-antispam dependencies
by Sven Schwyn 22 May '11

22 May '11

Hi There's currently a version block for the dovecot and dovecot-antispam packages in Gentoo. Dependencies indicate that dovecot-2.0.11 does not accept dovecot-antispam-1.3. Is this correct or should it work? If not: How about the current rc of version 1.4? Cheers, -sven

4 5

[Dovecot] fts squat index file not appearing
by Cor Bosman 22 May '11

22 May '11

Hey all, im experimenting with squat for a small project but am not having much luck. Debugging tells me squat is being loaded, but the index.search files are not appearing after TEXT/BODY commands. Squat plugin was added to config as well. Anyone have an idea? Cor

3 9

[Dovecot] hardluck w/ sieve
by errno 22 May '11

22 May '11

I've followed the docs here: http://wiki.dovecot.org/LDA/Sieve/Dovecot ... in particular, the 'Per-user Sieve script location' scenario. However, I'm unable to get any behavior that indicates that sieve is functioning correctly - well, functioning _at_all_ would be more accurate. Relevant dovecot.conf: protocol lda { ... mail_plugins = sieve } auth default { ... passdb passwd-file { args = /var/vmail/passwd } userdb static { args = uid=vmail gid=vmail home=/var/vmail/%d/%u } } plugin { sieve = /var/sieve-scripts/%d/%u.sieve } ls -l /var/sieve-scripts/domain.com/user.sieve -rw-r--r-- 1 vmail vmail 224 May 22 00:18 /var/sieve-scripts/domain/user.sieve I of course have an extremely simple rule in the example 'user.sieve' file; but for whatever reasons, no filtering is occurring. Is there anything obvious in my configuration that's broke? How best to debug? Thankyou!

1 1

Re: [Dovecot] fts crash
by Daniel L. Miller 22 May '11

22 May '11

On 5/21/2011 8:17 PM, Daniel L. Miller wrote: > On 5/21/2011 8:04 PM, Daniel L. Miller wrote: >> I've completed my mailbox rebuild - theoretically I should be free of >> corruption. I used dsync to export from mdbox to maildir (so should >> be clean) then used a virtual machine with Dovecot to import back to >> mdbox in another location. So...theoretically I should be free of >> all corruption now... >> > Perhaps I spoke too soon... > > May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Error: FETCH > [] for mailbox INBOX UID 1274 got too little data: 4443 vs 5253 > May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Error: > Corrupted index cache file > /var/mail/amfes.com/emiller/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.cache: > Broken virtual size for mail UID 1274 > May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Disconnected: > FETCH failed bytes=103/5395 > > Note that the above logged error appears from a MUA accessing the mailbox - no log entries from a doveadm search text command. -- Daniel

1 0

Re: [Dovecot] fts crash
by Daniel L. Miller 22 May '11

22 May '11

On 5/21/2011 8:04 PM, Daniel L. Miller wrote: > I've completed my mailbox rebuild - theoretically I should be free of > corruption. I used dsync to export from mdbox to maildir (so should > be clean) then used a virtual machine with Dovecot to import back to > mdbox in another location. So...theoretically I should be free of all > corruption now... > Perhaps I spoke too soon... May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Error: FETCH [] for mailbox INBOX UID 1274 got too little data: 4443 vs 5253 May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Error: Corrupted index cache file /var/mail/amfes.com/emiller/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index.cache: Broken virtual size for mail UID 1274 May 21 20:13:38 bubba dovecot: imap(emiller(a)amfes.com): Disconnected: FETCH failed bytes=103/5395 -- Daniel

1 0

[Dovecot] fts crash
by Daniel L. Miller 22 May '11

22 May '11

I've completed my mailbox rebuild - theoretically I should be free of corruption. I used dsync to export from mdbox to maildir (so should be clean) then used a virtual machine with Dovecot to import back to mdbox in another location. So...theoretically I should be free of all corruption now... Running an fts update - "doveadm search text -u user(a)domain.com xyzzyx" works on some users - other mailboxes crash with: doveadm(dmiller(a)amfes.com): Panic: file squat-trie.c: line 876 (squat_build_word): assertion failed: (i + bytelen <= size) doveadm(dmiller(a)amfes.com): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x3ccca) [0x7ffee92b6cca] -> /usr/local/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x32) [0x7ffee92b6db2] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x16dda) [0x7ffee9290dda] -> /usr/local/lib/dovecot/lib21_fts_squat_plugin.so(+0x5bbd) [0x7ffee6607bbd] -> /usr/local/lib/dovecot/lib21_fts_squat_plugin.so(squat_trie_build_more+0x153) [0x7ffee6607d13] -> /usr/local/lib/dovecot/lib20_fts_plugin.so(+0x59bc) [0x7ffee68159bc] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_search_next_nonblock+0x20) [0x7ffee99ac180] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(mailbox_search_next+0x26) [0x7ffee99ac1d6] -> doveadm() [0x40ce47] -> doveadm() [0x409304] -> doveadm(doveadm_mail_single_user+0x8c) [0x40961c] -> doveadm() [0x409817] -> doveadm(doveadm_mail_try_run+0x141) [0x409c31] -> doveadm(main+0x3b1) [0x40dfd1] -> /lib/libc.so.6(__libc_start_main+0xfe) [0x7ffee8b09d8e] -> doveadm() [0x408c09] Aborted -- Daniel

1 0

[Dovecot] Behavior difference in mbox versus Maildir listing
by Bruno Prémont 22 May '11

22 May '11

Hi, My MUA (claws-mail) is having a hard time listing directories for a mail account with two namespaces, one of which using mbox and the other one using maildir to store mails. Let's call the namespaces "#mbox." and "#maildir." and have "." as separator. Assume I have the following folder hierarchy: $namespace $namespace folder $namespace folder folder1a $namespace folder folder1b $namespace folder folder1c The resulting IMAPv4 session is: mb1 LIST "" "#mbox.%" * LIST (\Noselect \HasChildren) "." "#mbox.folder" mb1 OK List completed. mb2 LIST "" "#mbox.folder.%" * LIST (\Noselect \HasChildren) "." "#mbox.folder." * LIST (\NoInferiors \UnMarked) "." "#mbox.folder.folder1a" * LIST (\NoInferiors \UnMarked) "." "#mbox.folder.folder1b" * LIST (\NoInferiors \UnMarked) "." "#mbox.folder.folder1c" mb2 OK List completed. md1 LIST "" "#maildir.%" * LIST (\HasChildren) "." "#maildir.folder" md1 OK List completed. md2 LIST "" "#maildir.folder.%" * LIST (\HasNoChildren) "." "#maildir.folder.folder1a" * LIST (\HasNoChildren) "." "#maildir.folder.folder1b" * LIST (\HasNoChildren) "." "#maildir.folder.folder1c" md2 OK List completed. Notice the extra presence of listed folder itself with trailing "." in mb2 that has no equivalent in md2! Is this expected listing behavior? If so, why the differing behavior between both storage engines? Affected dovecot versions: at least 1.1.16 and 2.0.11 (installed from Gentoo packages) System is x86 on XFS Thanks, Bruno

2 4

[Dovecot] IMAP COMPRESS not announced while using imap_zlib plugin
by Henrik Larsson 21 May '11

21 May '11

I'm trying to enable the IMAP COMPRESS plugin listed here: http://wiki2.dovecot.org/Plugins/Compress I have added zlib globally and imap_zlib to the imap protocol. This is the output from doveconf -n with regards to mail_plugins: --cut-- mail_plugins = zlib protocol imap { mail_plugins = zlib imap_zlib } --cut But it seem like the feature is not announced when connecting to the IMAP server: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS LOGINDISABLED AUTH=DIGEST-MD5 AUTH=CRAM-MD5] Dovecot ready. I would expect something like COMPRESS=DEFLATE. I haven't enabled any compression for the Maildir files, zlib_save_level and zlib_save is not set. Does IMAP COMPRESS only work if the mailbox is compressed? Best regards Henrik Larsson

2 3

Re: [Dovecot] How to stop mail_executable from cwd to ~home
by Joseph Tam 21 May '11

21 May '11

Gary Duncan <gduncan(a)engr.UVic.CA> writes: > In our environment home directories are auto-mounted via /home/<user> > including on the server provided mail. > Within the various mail services though we try to isolate > and override with local /mail/home/<user> > > Works well except that dovecot still wants to cd to the real home > triggering a useless and potentially hindering automount This becomes really apparent if you have an organization wide-mailing list, and one delivery to it causes a flurry of automounts. I similarly replace per-user mounts with a home mount bundle. > when it invokes the imap or pop3 process specified by mail_executable, > ie an lsof of the process shows cwd of /home/<user> and the automounted home. I see the same behaviour in 2.0.13, which process tracing of imap shows more clearly (/nfs/user is per user mount, /nfs/home/user is user home bundle) ... 4087: getuid() = 12345 [12345] 4087: chdir("/nfs/test") = 0 4087: stat64("/nfs/home/test/mail", 0xFFBFF6C0) = 0 4087: stat64("/nfs/home/test/mail", 0xFFBFF5A0) = 0 4087: stat64("/nfs/home/test/mail", 0xFFBFF6C0) = 0 ... This happens fairly early after imap-login forks and execs the imap process. I'll see if I can find it after building a debug version, but I think Timo will beat me to this. Joseph Tam <jtam.home(a)gmail.com>

2 2

[Dovecot] dovecot & OCFS2 Cluster
by Osvaldo Alvarez Pozo 20 May '11

20 May '11

hi all We have an ocfs2 cluster compose of 4 Debian lenny serveurs wich have access to an ISCSI LUN we have create a partition on this Lun and formated this partition as OCFS2. 2 serveurs does mail delivery (SMTP) and the two other are pop/imap servers. The smtp servers use dovecot LDA to deliver to mailboxes. La version de dovecot is 1.2.13, ldirectord balance conexion to the servers(pop/pops/imap/imaps to the two imap/pop serveurs) (smtp to the two smtp servers). this is a part of my dovecot.conf mail_location = maildir:/var/vmail/%d/%u/Maildir mail_access_groups = mail first_valid_uid = 5000 last_valid_uid = 5000 mail_max_userip_connections = 100 maildir_copy_with_hardlinks = yes disable_plaintext_auth = no dotlock_use_excl=yes mmap_disable = yes protocols = imap imaps pop3 pop3s managesieve protocol imap { mail_plugins = quota imap_quota imap_client_workarounds = outlook-idle delay-newmail } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = quota sieve log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } protocol managesieve { managesieve_implementation_string = dovecot } auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/sql.conf } userdb prefetch { } userdb sql { args = /etc/dovecot/sql.conf } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = mail } We are having severals problems from "cpu stuck for 61 seconds" to "too many connexion". I wonder if there is a configuation type of dovecot when using ocfs2. In tje dovecot site they give advices about how to configure dovecot when using NFS, but not about OCFS2. Somme people say that lda shuld not be used. Any help please? Thanks nebano

7 17

[Dovecot] Migrate to new server without raw copy
by Daniel L. Miller 20 May '11

20 May '11

I've setup a new virtual machine to run my mail servers. Dovecot is installed and talking with the LDAP server for the user list. Now the question is how to migrate the data from the old Dovecot to the new. The data is stored in mdbox, with some possible corruption. Accordingly, any form of simple file copy is not the answer - I need the messages to be processed by something and then stored fresh on the new server. I do have NFS access both ways if that does anything. I tried imapsync - but it quickly broke on some of the messages. Is dsync the answer? Or do I use a MUA and drag-n-drop the messages a batch at a time between the servers? -- Daniel

3 2

[Dovecot] xi.rename-it.nl down?
by Jim Knuth 20 May '11

20 May '11

Hello, http://xi.rename-it.nl/debian/dists/stable-auto/dovecot-2.0 not available? -- Mit freundlichen Grüßen, with kind regards, Jim Knuth --------- Mit dem Geist ist es wie mit dem Magen: Mann kann ihm nur Dinge zumuten, die er verdauen kann. [Churchill]

2 2

[Dovecot] Released Pigeonhole Sieve v0.1.19 and ManageSieve v0.11.13 for Dovecot v1.2.17
by Stephan Bosch 20 May '11

20 May '11

Hello Dovecot users, As promised, I hereby release new versions of Sieve and ManageSieve for Dovecot v1.2. These releases consist entirely of (backported) bugfixes and introduce no new features. There is a good chance that these are the last releases for Dovecot v1.2. Changelog Sieve v0.1.19: - Enotify extension: fixed inappropriate return type in mailto URI parse function, also fixing ARM compiler warning. - Vacation extension: fixed handling of sendmail errors. It produced an additional confusing success message in case of error. - Removed header MIME-decoding to fix erroneous address parsing. Applies to address test and vacation command. Changelog ManageSieve v0.11.13: - ManageSieve: fixed bug in UTF-8 checking of string values. The releases are available as follows: Sieve http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.19.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.19.tar.gz.sig ManageSieve http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.13.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.13.tar.gz.… ManageSieve patch http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.17-managesieve-0.11.13.diff… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.17-managesieve-0.11.13.diff… Refer to http://pigeonhole.dovecot.org and the Dovecot wiki for more information. Don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] How to stop mail_executable from cwd to ~home
by Gary Duncan 19 May '11

19 May '11

In our environment home directories are auto-mounted via /home/<user> including on the server provided mail. Within the various mail services though we try to isolate and override with local /mail/home/<user> Works well except that dovecot still wants to cd to the real home triggering a useless and potentially hindering automount when it invokes the imap or pop3 process specified by mail_executable, ie an lsof of the process shows cwd of /home/<user> and the automounted home. It does this even though home is properly overridden within. I suspect this is part of changing to invoke as the user as the *-login process are ok but then they are still running as dovecot. Various recent attempts to explicitly respecify HOME for mail_executable via a wrapper script or using env have been to no avail (as seen below). How can I resolve? And no I don't just want to override /home at the system level. Thanks -- Gary # 1.0.9: /etc/dovecot.conf base_dir: /var/run/dovecot/ syslog_facility: local1 protocols: imap imaps pop3 pop3s listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 ssl_listen(default): *:993 ssl_listen(imap): *:993 ssl_listen(pop3): *:995 ssl_ca_file: /etc/ssl/certs/gd_bundle.crt ssl_cert_file: /etc/ssl/certs/engr.uvic.ca.crt ssl_key_file: /etc/ssl/private/engineeringwildcard.key ssl_parameters_regenerate: 24 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_log_format_elements: %u [%r] %c login_process_size: 32 login_processes_count: 8 login_max_processes_count: 150 verbose_proctitle: yes first_valid_uid: 100 default_mail_env: mbox:/mail/home/%u/mail/:INBOX=/mail/boxes/%u:INDEX=/mail/indexes/%u mail_location: mbox:/mail/home/%u/mail/:INBOX=/mail/boxes/%u:INDEX=/mail/indexes/%u mbox_read_locks: fcntl dotlock mbox_write_locks: fcntl dotlock mail_executable(default): /bin/env 'HOME=/mail/home/$USER' /usr/libexec/dovecot/imap mail_executable(imap): /bin/env 'HOME=/mail/home/$USER' /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3-home mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %v.%u pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): oe-ns-eoh outlook-no-nuls auth default: passdb: driver: pam userdb: driver: passwd args: home=/mail/home/%u plugin: home: /mail/home/%u

2 1

[Dovecot] v2.0.13 released
by Timo Sirainen 19 May '11

19 May '11

http://dovecot.org/releases/2.0/dovecot-2.0.13.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.13.tar.gz.sig I've almost managed to read my email backlog, but there are still some unanswered mails. Feel free to resend if you think I should have answered some of your mails. The most important changes since v2.0.12: + Added "doveadm index" command to add unindexed messages into index/cache. If full text search is enabled, it also adds unindexed messages to the fts database. + added "doveadm director dump" command. + pop3: Added support for showing messages in "POP3 order", which can be different from IMAP message order. This can be useful for migrations from other servers. Implemented it for Maildir as 'O' field in dovecot-uidlist. - doveconf: Fixed a wrong "subsection has ssl=yes" warning. - mdbox purge: Fixed wrong warning about corrupted extrefs. - sdbox: INBOX GUID changed when INBOX was autocreated, leading to trouble with dsync. - script-login binary wasn't actually dropping privileges to the user/group/chroot specified by its service settings. - Fixed potential crashes and other problems when parsing header names that contained NUL characters.

5 12

[Dovecot] integrating procmail
by errno 19 May '11

19 May '11

Hello, list members! I'm new to dovecot, and haven't needed to maintain an email server instance for quite some time. I recently got a fairly simple postfix + dovecot installation functional as needed, however I now need to get procmail filtering incoming mail, and after reading various docs and wikis, I find that I'm still having a tough time feeling confident on how best to approach it in the simplest manner. (this is for a small installation.... 10 email accounts, max). Below, I've provide the relevant snippets of my current functional configuration; how best to integrate procmail into the mix? /etc/postfix/main.cf: ... alias_maps = hash:/etc/mail/aliases local_recipient_maps = hash:/etc/postfix/vmailbox, $alias_maps virtual_transport = dovecot virtual_mailbox_domains = $mydomain virtual_mailbox_base = /var/vmail/ virtual_mailbox_maps = hash:/etc/postfix/vmailbox virtual_minimum_uid = 500 virtual_uid_maps = static:501 virtual_gid_maps = static:501 ... /etc/postfix/master.cf: ... dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} - d ${recipient} ... /etc/dovecot/dovecot.conf: ... mail_location = maildir:~/Maildir protocol lda { sendmail_path = /usr/sbin/sendmail } auth default { mechanisms = plain passdb passwd-file { args = /var/vmail/passwd } userdb static { args = uid=vmail gid=vmail home=/var/vmail/%d/%u } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail group = vmail } } } ... Thankyou for any tips, much appreciated!

8 8

[Dovecot] alternative storage taken from sql
by Pierre 19 May '11

19 May '11

Hi list, I'm looking for a simple way to define alternative storage (ALT parameter in mail_location) from userdb query. dovecot v2 Is there a simple way to handle this ? Thanks a lot Pierre PS: I'm talking about this functionnality: http://wiki2.dovecot.org/Tools/Doveadm/Altmove

3 2

Re: [Dovecot] Posfix and Dovecot (dovecot like LDA) and no space left on the disk
by Petr Svacina 19 May '11

19 May '11

Here is the logs: May 8 06:00:36 mailserver dovecot: deliver(sazima(a)vendys.net): msgid=<3DEF56667E754F24B163C9767422C9A9(a)dlllk.local>: save failed to INBOX: Not enough disk space May 8 06:00:36 mailserver dovecot: deliver(sazima(a)vendys.net): msgid=<3DEF56667E754F24B163C9767422C9A9(a)dlllk.local>: rejected: Not enough disk space May 8 06:00:36 mailserver postfix/pickup[27640]: D8B242F9E1: uid=150 from=<> May 8 06:00:36 mailserver postfix/pipe[27978]: 4B3A72F8C0: to=<sazima(a)vendys.net>, relay=dovecot, delay=11, delays=11/0.02/0/0.04, dsn=2.0.0, status=sent (delivered via dovecot service) May 8 06:00:36 mailserver postfix/qmgr[18807]: 4B3A72F8C0: removed Problem is, that: 1. spool HAVE ENOUGH space (so postfix has no problem keeps the message in the spool) 2. postfix forward message to dovecot 3. dovecot accept message, but can not deliver to /home/vmail, because there is no space :-) 4. so dovecot lost/delete/refuse message and tells postfix - everything is Ok ? 5. postfix cleans qmgr (bacause message has been forward to LDA succesfully I suppose :-) ) Thanks Peter > > On Mon, 2011-05-09 at 17:37 +0200, Petr Svacina wrote: > >> If my server is out of space (disk full) and the postfix is LDA, the >> new messages a deffered or refused,so postfix send 450 to sender ... >> But When I use dovecot (1.2.16) like LDA, postfix accept message (even >> there is no space), forward to dovecot, dovecot REFUSE the message and >> message is lost ! > > Dovecot deliver should fail with tempfail, which Postfix should notice > and forward to the original sender. If deliver doesn't return tempfail, > it's a bug. I'd like to see Postfix logs of when this problem happens. > > -- Tato zprava byla prohledana na vyskyt viru a nebezpecneho obsahu antivirovym systemem MailScanner a zda se byt cista.

4 5

[Dovecot] Dovecot deliver
by Gonzalo Rodriguez 19 May '11

19 May '11

Hi all, I have a problem with my dovecot/postfix configuration: here is my dovecot -n # 1.2.16: /etc/dovecot.conf Warning: fd limit 128 is lower than what Dovecot can use under full load (more than 768). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: OpenBSD 4.9 i386 nfs base_dir: /var/dovecot/ log_path: /var/log/dovecot protocols: imaps pop3s login_dir: /var/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: _dovecot mail_location: maildir:/var/www/datos/correo/foobar.com.ar/%n:LAYOUT=fs mail_debug: yes mail_nfs_storage: yes mail_nfs_index: yes mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: mail_plugins: sieve postmaster_address: postmaster(a)foobar.com.ar log_path: /var/log/dovecot-deliver-errors.log info_log_path: /var/log/dovecot-deliver.log auth default: mechanisms: login plain verbose: yes debug: yes debug_passwords: yes passdb: driver: bsdauth userdb: driver: static args: uid=vmail gid=vmail home=/var/www/datos/correo/foobar.com.ar/%n, allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: _postfix group: _postfix master: path: /var/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve_global_dir: /var/sieve sieve_global_path: /var/sieve/global-default.sieve sieve: /var/sieve/%n.sieve I use bsdauth to system users auth againts Active-Directory, and I use dovecot to deliver the mails, in my postfix master.cf I have this: ## Deliver con Dovecot en ## Mailboxes dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} The problem is I don't any process like this: pipe -n dovecot -t unix flags=DRhu user=vmail /usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} And in the dovecot log I don't see anything, but in maillog I have: May 18 09:49:35 FOOBAR-0010 postfix/local[16584]: 8808D26125: to=<gonzalor(a)foobar.com.ar>, relay=local, delay=0.92, delays=0.91/0.01/0/0, dsn=2.0.0, status=sent (delivered to mailbox) But the mail it's not in the mailbox, what is wrong? any hint? the storage is a NFS with centos. cheers

3 7

[Dovecot] Dovecot 2.0 (2.0.11) na nfs quota
by Bartłomiej Solarz-Niesłuchowski 18 May '11

18 May '11

Good Morning! I have problems with setup imap quota with mailboxes on nfs I use dovecot 2.0.11, below dovecot.conf + extract from log: # 2.0.9: /etc/dovecot.conf.rpmsave # OS: Linux 2.6.35.11-83.fc14.x86_64 x86_64 Fedora release 14 (Laughlin) mail_plugins = acl quota zlib trash auth_cache_size = 8 k dotlock_use_excl = yes mail_location = maildir:~/Maildir:INBOX=/var/spool/mail/%u mail_nfs_index = yes mail_fsync=always mail_nfs_storage = yes mail_privileged_group = mail mmap_disable = yes ssl_cert = </etc/pki/tls/certs/ipop3d.pem ssl_key = </etc/pki/tls/certs/ipop3d.pem passdb { args = cache_key=%u%r%l max_requests=256 driver = pam } protocols = imap pop3 service auth { client_limit = 5248 user = root } service anvil { client_limit=1155 } service imap-login { client_limit = 256 inet_listener imap { port = 0 } inet_listener imaps { address = [::], * port = 993 } process_limit = 1024 service_count = 0 } protocol imap { ssl_cert = </etc/pki/tls/certs/imapd.pem ssl_key = </etc/pki/tls/certs/imapd.pem mail_plugins = $mail_plugins imap_quota mail_debug=yes } service imap { process_limit = 2048 } service pop3-login { client_limit = 256 inet_listener pop3 { port = 0 } inet_listener pop3s { address = [::], * port = 995 } process_limit = 128 service_count = 0 } protocol pop3 { ssl_cert = </etc/pki/tls/certs/ipop3d.pem ssl_key = </etc/pki/tls/certs/ipop3d.pem } service pop3 { process_limit = 2048 } userdb { driver = passwd } plugin { quota = fs:Disk quota:user quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u } service quota-warning { executable = script /usr/local/bin/quota-warning.sh # use some unprivileged user for executing the quota warnings user = dovenull unix_listener quota-warning { } } Mar 9 09:36:06 dervish dovecot: imap-login: Login: user=<solarz>, method=PLAIN, rip=213.135.34.118, lip=213.135.44.54, mpid=4264, TLS Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: Effective uid=1761, gid=101, home=/home/staff/solarz Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: acl: No acl setting - ACLs are disabled Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: Quota root: name=Disk quota backend=fs args=user Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: Quota warning: bytes=0 (95%) messages=0 reverse=no command=quota-warning 95 solarz Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: Quota warning: bytes=0 (80%) messages=0 reverse=no command=quota-warning 80 solarz Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: maildir++: root=/home/staff/solarz/Maildir, index=, control=, inbox=/var/spool/mail/solarz Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: fs quota add mailbox dir = /home/staff/solarz/Maildir Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: fs quota block device = oceanic:/home7 Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: fs quota mount point = /home7 Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: fs quota mount type = nfs Mar 9 09:36:06 dervish dovecot: imap(solarz): Debug: trash: No trash setting - plugin disabled Mar 9 09:36:06 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:06 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:06 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:08 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:14 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory Mar 9 09:36:14 dervish dovecot: imap(solarz): Error: quotactl(Q_GETQUOTA, oceanic:/home7) failed: No such file or directory [root@dervish dovecot]# quota solarz Ograniczenia dyskowe user solarz (uid 1761): System plików bloki miękki twardy pobł. pliki miękki twardy pobł. /dev/mapper/vg01-lvol00 256572 7120150 8000150 1373 140010 510010 ftp:/home/ftp/pub 163490624 180000000 280000000 221472 0 0 oceanic:/home1 162643 13756030 14888830 697 190000 650000 oceanic:/home7 12298720 13756030 14888830 144846 190000 650000 oceanic:/homed 3022789 13756030 14888830 15122 190000 650000 What I doing wrong? Best Regards PS-Inbox is mounted locally rest of the mailboxes are via nfs -- Bartłomiej Solarz-Niesłuchowski, Administrator WSISiZ e-mail: Bartlomiej.Solarz-Niesluchowski(a)wit.edu.pl tel. 223486547, fax 223486501 JID: solarz(a)jabber.wit.edu.pl 01-447 Warszawa, ul. Newelska 6, pokój 404, pon.-pt. 8-16 Motto - Jak sobie pościelisz tak sie wyśpisz

2 7

[Dovecot] newbie: can not authenticate using dovecot
by nyoman.bogi＠gmail.com 18 May '11

18 May '11

Hi all, This is the first time I used Dovecot and it's perfectly run : dev# ps ax | grep dove 77332 ?? Ss 0:00.30 /usr/local/sbin/dovecot -c /usr/local/etc/dovecot.con 77333 ?? S 0:00.10 dovecot-auth 77334 ?? I 0:00.02 dovecot-auth -w 81495 0 S+ 0:00.00 grep dove But when I try to connect to Dovecot's POP3 Server : dev# telnet 127.0.0.1 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user bogi +OK pass bogi Connection closed by foreign host. Is there something I missed in Dovecot's configuration? This is my configuration : dev# dovecot --version 1.2.16 dev# dovecot -n # 1.2.16: /usr/local/etc/dovecot.conf # OS: FreeBSD 8.2-RELEASE i386 protocols: pop3 listen: 127.0.0.1:110 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/pop3-login verbose_proctitle: yes first_valid_uid: 1000 first_valid_gid: 1000 mail_privileged_group: mail mail_location: mbox:~/mail/:INBOX=/var/mail/%u mail_executable: /usr/local/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/lib/dovecot/pop3 pop3_client_workarounds: outlook-no-nuls oe-ns-eoh lda: sendmail_path: /usr/sbin/sendmail auth default: mechanisms: plain login username_format: %Lu passdb: driver: pam args: session=yes dovecot userdb: driver: passwd args: blocking=yes socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384

2 4