- dovecot - dovecot.org

[Dovecot] imap core dumping on signal 10
by Chris Hoogendyk 25 Jul '10

25 Jul '10

We are just trying to bring up a new server and chose to use Dovecot rather than the uw-imap from our previous servers. At this point I am just testing with some throw away accounts using squirrelmail. I can load my inbox, but then the imap connection is lost. I presume you need some real information to get your teeth into, so this is going to get a little long. I'll give you three things below: 1. a piece of /var/adm/dovecot.log, 2. the output of `dovecot -n`, and then 3. the full gdb trace back on the core file. I'm hoping that, aside from there being a bug that causes core dumps, we might have a straightforward misconfiguration that we could fix and have a working installation. All info at end. -- --------------- Chris Hoogendyk - O__ ---- Systems Administrator c/ /'_ --- Biology & Geology Departments (*) \(*) -- 140 Morrill Science Center ~~~~~~~~~~ - University of Massachusetts, Amherst <hoogendyk(a)bio.umass.edu> --------------- Erdös 4 ----------------------------------------------- following is the complete log of the connection ----------------------------------------------- Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] auth(default): client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=993 rport=65462 resp=AGNocmlzaG8AMG5XMHJEPyE= Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] auth(default): shadow(chrisho,127.0.0.1): lookup Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] auth(default): client out: OK 1 user=chrisho Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] auth(default): master in: REQUEST 1 22961 1 Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] auth(default): passwd(chrisho,127.0.0.1): lookup Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] auth(default): master out: USER 1 chrisho system_groups_user=chrisho uid=2295 gid=102 home=/u1/home/bio/hoogendyk Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] imap-login: Login: user=<chrisho>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, TLS Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): Effective uid=2295, gid=102, home=/u1/home/bio/hoogendyk Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): mbox: data=~/mail:INBOX=/var/mail/chrisho Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): fs: root=/u1/home/bio/hoogendyk/mail, index=, control=, inbox=/var/mail/chrisho Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): Disconnected: Logged out bytes=44/697 Jul 20 17:34:05 imladris dovecot: [ID 583609 local2.info] auth(default): new auth connection: pid=22968 Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] auth(default): client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=993 rport=65465 resp=AGNocmlzaG8AMG5XMHJEPyE= Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] auth(default): shadow(chrisho,127.0.0.1): lookup Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] auth(default): client out: OK 1 user=chrisho Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] auth(default): master in: REQUEST 2 22959 1 Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] auth(default): passwd(chrisho,127.0.0.1): lookup Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] auth(default): master out: USER 2 chrisho system_groups_user=chrisho uid=2295 gid=102 home=/u1/home/bio/hoogendyk Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] imap-login: Login: user=<chrisho>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, TLS Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): Effective uid=2295, gid=102, home=/u1/home/bio/hoogendyk Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): mbox: data=~/mail:INBOX=/var/mail/chrisho Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): fs: root=/u1/home/bio/hoogendyk/mail, index=, control=, inbox=/var/mail/chrisho Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): Namespace : Using permissions from /u1/home/bio/hoogendyk/mail: mode=0700 gid=-1 Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] auth(default): new auth connection: pid=22970 Jul 20 17:34:06 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): Disconnected: Logged out bytes=386/1304 Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] auth(default): client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=993 rport=65467 resp=AGNocmlzaG8AMG5XMHJEPyE= Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] auth(default): shadow(chrisho,127.0.0.1): lookup Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] auth(default): client out: OK 1 user=chrisho Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] auth(default): master in: REQUEST 3 22968 1 Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] auth(default): passwd(chrisho,127.0.0.1): lookup Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] auth(default): master out: USER 3 chrisho system_groups_user=chrisho uid=2295 gid=102 home=/u1/home/bio/hoogendyk Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] imap-login: Login: user=<chrisho>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, TLS Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): Effective uid=2295, gid=102, home=/u1/home/bio/hoogendyk Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): mbox: data=~/mail:INBOX=/var/mail/chrisho Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] IMAP(chrisho): fs: root=/u1/home/bio/hoogendyk/mail, index=, control=, inbox=/var/mail/chrisho Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.error] dovecot: child 22971 (imap) killed with signal 10 (core dumped) Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.info] auth(default): new auth connection: pid=22973 Jul 20 17:34:07 imladris dovecot: [ID 583609 local2.warning] dovecot: Killed with signal 15 (by pid=22974 uid=0 code=kill) Jul 20 17:34:08 imladris dovecot: [ID 583609 local2.info] Dovecot v1.2.12 starting up ---------------------------------------------------------------------------------- following is the complete output of ( ulimit -n 1024; /usr/local/sbin/dovecot -n ) ---------------------------------------------------------------------------------- # ( ulimit -n 1024; /usr/local/sbin/dovecot -n ) # 1.2.12: /usr/local/etc/dovecot.conf # OS: SunOS 5.10 sun4v base_dir: /var/run/dovecot/ syslog_facility: local2 protocols: imaps pop3s ssl_listen: * ssl: required ssl_cert_file: /etc/mail/certs/sendmail.pem ssl_key_file: /etc/mail/certs/sendmail.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: ready. mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 first_valid_uid: 1000 first_valid_gid: 98 mail_privileged_group: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_reuse_xuidl(default): no pop3_reuse_xuidl(imap): no pop3_reuse_xuidl(pop3): yes pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %08Xv%08Xu pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_ verbose: yes debug: yes debug_passwords: yes passdb: driver: shadow userdb: driver: passwd # -------------------------------------------- and finally the complete trace back from gdb -------------------------------------------- # gdb /usr/local/libexec/dovecot/imap /var/core/core_imladris_imap_2295_102_1279661647_22971 GNU gdb 6.6 Copyright (C) 2006 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "sparc-sun-solaris2.10"... Reading symbols from /opt/coolstack/lib/libiconv.so.2...done. Loaded symbols for /opt/coolstack/lib/libiconv.so.2 Reading symbols from /usr/lib/libnsl.so.1...done. Loaded symbols for /usr/lib/libnsl.so.1 Reading symbols from /usr/lib/libsocket.so.1...done. Loaded symbols for /usr/lib/libsocket.so.1 Reading symbols from /usr/lib/librt.so.1...done. Loaded symbols for /usr/lib/librt.so.1 Reading symbols from /usr/lib/libsendfile.so.1...done. Loaded symbols for /usr/lib/libsendfile.so.1 Reading symbols from /usr/lib/libc.so.1...done. Loaded symbols for /usr/lib/libc.so.1 Reading symbols from /lib/libaio.so.1...done. Loaded symbols for /lib/libaio.so.1 Reading symbols from /lib/libmd.so.1...done. Loaded symbols for /lib/libmd.so.1 Reading symbols from /platform/sun4v/lib/libc_psr.so.1...done. Loaded symbols for /platform/SUNW,SPARC-Enterprise-T5220/lib/libc_psr.so.1 Reading symbols from /lib/ld.so.1...done. Loaded symbols for /lib/ld.so.1 Core was generated by `imap'. Program terminated with signal 10, Bus error. #0 0x000aa19c in mail_index_map (index=0x489, type=0) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-index//mail-index-map.c:502 502 map->hdr = *hdr; (gdb) bt full #0 0x000aa19c in mail_index_map (index=0x489, type=0) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-index//mail-index-map.c:502 ret = 2 old_map = (struct mail_index_map *) 0x162338 new_map = (struct mail_index_map *) 0x162338 st = {st_dev = 8388615, st_pad1 = {0, 0, 0}, st_ino = 30370, st_mode = 33152, st_nlink = 1, st_uid = 2295, st_gid = 102, st_rdev = 0, st_pad2 = {0, 0}, st_size = 18736, st_atim = {tv_sec = 1279661646, tv_nsec = 937908000}, st_mtim = {tv_sec = 1279661646, tv_nsec = 938505000}, st_ctim = {tv_sec = 1279661646, tv_nsec = 963091000}, st_blksize = 8192, st_blocks = 38, st_fstype = "ufs", '\0' <repeats 12 times>, st_pad4 = {0, 0, 0, 0, 0, 0, 0, 0}} lock_id = 4 file_size = 9223434923765923840 use_mmap = 48 unusable = 116 ret = 112 try = 0 _data_stack_cur_id = 4282335512 index = (struct mail_index *) 0x489 ext_hdr = (const struct mail_index_ext_header *) 0x0 i = 1450816 old_count = 187472 offset = 0 name = 0x70 <Address 0x70 out of bounds> error = 0x7fffffff <Address 0x7fffffff out of bounds> ext_id = 1177832 ext_offset = 1450992 index = (struct mail_index *) 0x70 rec_map = (struct mail_index_record_map *) 0xa0 hdr = (const struct mail_index_header *) 0x0 index = (struct mail_index *) 0x1606d0 handlers = (mail_index_sync_lost_handler_t * const *) 0x0 st = {st_dev = 0, st_pad1 = {0, 0, 0}, st_ino = 0, st_mode = 0, st_nlink = 0, st_uid = 0, st_gid = 0, st_rdev = 0, st_pad2 = {0, 0}, st_size = 0, st_atim = {tv_sec = 0, tv_nsec = 0}, st_mtim = {tv_sec = 0, tv_nsec = 0}, st_ctim = {tv_sec = 0, tv_nsec = 0}, st_blksize = 0, st_blocks = 0, st_fstype = '\0' <repeats 15 times>, st_pad4 = {0, 0, 0, 0, 0, 0, 0, 0}} i = 4290764916 count = 1161 ret = 1452352 try_retry = 160 retry = 222 index = (struct mail_index *) 0x1606d0 hdr = (const struct mail_index_header *) 0x8000000 read_buf = "\a\002\000x\000\000\000?\000\000\000\020\000\000\000\000LF\026N\000\000\000\000K?!?\000\002??\000\000\004\211\000\000\000\000\000\000\004\211\000\000\000\000\000\002??\000\002??\000\000\000\000\000\000\000\002\000\000[?\000\000[?", '\0' <repeats 12 times>, "LE\037@\000\002??", '\0' <repeats 31 times>, "\020\000\000\000\000\000\b\000\b\000\b\000\004mbox\000\000\000\000\000\000\000\000\000?o5LE?/\001\000\000\000\000\002??\b\000\000\000\000\000\000\000\000\000\002\032\000\002??\b\000\000\000\000\000\000\000\000\000\020V\000\002??\b\000\000\000\000\000\000\000\000\000#\237\000\002??\b\000\000\000\000\000\000\000\000\000F"... buf = (const void *) 0x0 data = (void *) 0x0 ret = -4202380 pos = 1161 records_size = 14640 initial_buf_pos = 1450992 records_count = 1161 extra = 3936 pos = 1161 ret = -4202380 #1 0x000a5adc in mail_index_try_open (index=0x160820) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-index//mail-index.c:300 ret = -1 #2 0x000a5fb0 in mail_index_open (index=0x8a040, flags=17, lock_method=FILE_LOCK_METHOD_DOTLOCK) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-index//mail-index.c:365 ret = 1969648384 ret = 1443536 created = false #3 0x00089c34 in index_storage_mailbox_open (ibox=0x600) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-storage/index//index-storage.c:406 storage = (struct mail_storage *) 0x15ad18 index_flags = 17 ret = 565312 cache = (struct mail_cache *) 0x0 cache_env = 0x0 never_env = 0x4000000 <Address 0x4000000 out of bounds> env = 0x100001 "" ---Type <return> to continue, or q <return> to quit--- #4 0x0008a134 in index_storage_mailbox_init (ibox=0x0, name=0x0, flags=0, move_to_memory=false) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-storage/index//index-storage.c:475 storage = (struct mail_storage *) 0x11 box = (struct mailbox *) 0x0 dir_gid = -1 origin = 0x15b140 "/var/mail/chrisho" dir_origin = 0x15b140 "/var/mail/chrisho" buffer = (buffer_t *) 0x0 buffer = (buffer_t *) 0x1615c8 #5 0x00064ad8 in mbox_alloc_mailbox (storage=0x3164c, index=0x1606d0, name=0x11f8e8 "INBOX", path=0x15b140 "/var/mail/chrisho", flags=0) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-storage/index/mbox//mbox-storage.c:608 mbox = (struct mbox_mailbox *) 0x0 pool = (pool_t) 0x0 env = 0xffea0950 <Address 0xffea0950 out of bounds> st = {st_dev = 0, st_pad1 = {0, 1374345, -4197072}, st_ino = 0, st_mode = 0, st_nlink = 0, st_uid = 16, st_gid = 1, st_rdev = 4290769692, st_pad2 = {-13172344, -4196552}, st_size = 1007998744081760, st_atim = {tv_sec = -15531076, tv_nsec = -1431216}, st_mtim = {tv_sec = 1431216, tv_nsec = -1431216}, st_ctim = {tv_sec = -1431216, tv_nsec = 1431216}, st_blksize = 1, st_blocks = 4279457448, st_fstype = "\000\025ְ\000\a?|\000\025ְ?7*", st_pad4 = {-15531076, -1447600, 1447600, -1439408, -1439408, 1439408, 1, -15489704}} min_size = 4282335320 #6 0x00066628 in mbox_open (storage=0x15af28, name=0x11f8e8 "INBOX", flags=0) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-storage/index/mbox//mbox-storage.c:626 _storage = (struct mail_storage *) 0x0 mbox = (struct mbox_mailbox *) 0x0 index = (struct mail_index *) 0x0 path = 0x0 rootdir = 0x0 #7 0x0009863c in mailbox_open (_storage=0xff1392e4, name=0x124b08 "INBOX", input=0x0, flags=0) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib-storage//mail-storage.c:478 storage = (struct mail_storage *) 0x15ad18 box = (struct mailbox *) 0x124b08 #8 0x0002be9c in cmd_select_full (cmd=0x0, readonly=false) at /usr/local/src/dovecot/dovecot-1.2.12/src/imap//cmd-select.c:261 client = (struct client *) 0x15b400 box = (struct mailbox *) 0x1be8b ctx = (struct imap_select_context *) 0xffbff358 args = (const struct imap_arg *) 0x15df10 mailbox = 0x124b08 "INBOX" ret = 0 name = 0x0 seqset = {arr = {buffer = 0x0, element_size = 0}, v = 0x0, v_modifiable = 0x0} uidset = {arr = {buffer = 0x99b88f8, element_size = 240}, v = 0x99b88f8, v_modifiable = 0x99b88f8} count = 1 buffer = (buffer_t *) 0x15ad18 buffer = (buffer_t *) 0x15ad18 buffer = (buffer_t *) 0xff1303bc buffer = (buffer_t *) 0x10 seq_range = (const struct seq_range *) 0x0 uid_range = (const struct seq_range *) 0x0 seq_iter = {array = 0x0, prev_n = 0, prev_idx = 4096} i = 2147483648 seq_count = 10240 uid_count = 1422984 diff = 2147498290 n = 10048 seq = 1366052 buffer = (buffer_t *) 0x15ad18 buffer = (buffer_t *) 0x15ad18 client = (struct client *) 0x15b400 status = {messages = 1366064, recent = 1366052, unseen = 0, uidvalidity = 0, uidnext = 0, first_unseen_seq = 0, highest_modseq = 0, keywords = 0x0, sync_delayed_expunges = 0, nonpermanent_modseqs = 0} open_flags = 0 fetch_ctx = (struct imap_fetch_context *) 0x0 search_args = (struct mail_search_args *) 0x0 #9 0x0002c3b0 in cmd_select (cmd=0xfa2bc) at /usr/local/src/dovecot/dovecot-1.2.12/src/imap//cmd-select.c:388 No locals. #10 0x0002ef20 in client_command_input (cmd=0x6) at /usr/local/src/dovecot/dovecot-1.2.12/src/imap//client.c:612 client = (struct client *) 0x15b400 command = (struct command *) 0x80000000 #11 0x0002f190 in client_command_input (cmd=0x15b688) at /usr/local/src/dovecot/dovecot-1.2.12/src/imap//client.c:661 client = (struct client *) 0x15b400 ---Type <return> to continue, or q <return> to quit--- command = (struct command *) 0x14f940 #12 0x0002f8b4 in client_handle_input (client=0x80000000) at /usr/local/src/dovecot/dovecot-1.2.12/src/imap//client.c:458 ret = false remove_io = false handled_commands = false #13 0x000303e4 in client_input (client=0x0) at /usr/local/src/dovecot/dovecot-1.2.12/src/imap//client.c:753 cmd = (struct client_command_context *) 0x707 output = (struct ostream *) 0x15b600 bytes = 21 #14 0x000fc2e8 in io_loop_handler_run (ioloop=0x0) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib//ioloop-poll.c:203 ctx = (struct ioloop_handler_context *) 0x159318 pollfd = (struct pollfd *) 0x159b28 tv = {tv_sec = 1799, tv_usec = 999491} io = (struct io_file *) 0x158488 t_id = 2 msecs = 288 ret = 1 call = true #15 0x000fb680 in io_loop_run (ioloop=0xffbffa3e) at /usr/local/src/dovecot/dovecot-1.2.12/src/lib//ioloop.c:335 No locals. #16 0x0003c190 in main (argc=0, argv=0x1, envp=0x0) at /usr/local/src/dovecot/dovecot-1.2.12/src/imap//main.c:327 version = 0x80000000 <Address 0x80000000 out of bounds> plugin_dir = 0x14f400 "" user = 0x3b800 "\232 " env = 0xffbff808 "" client = (struct client *) 0x14f400 output = (struct ostream *) 0x158280 user = (struct mail_user *) 0x1 username = 0xffbffa3e "A001" home = 0x14d800 "" str = 0x15a6c8 "" tag = 0x14f400 "" _data_stack_cur_id = 0 buf = (buffer_t *) 0x15b400 list = (struct client_workaround_list *) 0x1 env = 0x5 <Address 0x5 out of bounds> str = (const char * const *) 0x14f730 (gdb) quit # -------------- and that's all --------------

2 7

[Dovecot] v1.2.13 released
by Timo Sirainen 25 Jul '10

25 Jul '10

http://dovecot.org/releases/1.2/dovecot-1.2.13.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.13.tar.gz.sig This release fixes a bug in ACL plugin, which could be considered a security bug: If Maildir is used with default settings (INBOX is same as Maildir root dir) and user set some ACLs to INBOX, those ACLs were copied to all newly created mailboxes. This should have been done only for "default ACLs", but with Maildir the INBOX directory is the same as the default ACL directory, so this mixup happened. This bug exists only in v1.2.x releases. Other fixes: - Fixed iconv() crash when it was processing several kilobytes of broken continuous input. This mainly could have caused a problem with IMAP SEARCH. Possibly also with some Sieve checks. - If MIME encoded-words contained line feeds, Dovecot logged cache corruption errors. - mbox: Renaming mailbox under newly created dir didn't move index directory. - mbox: When generating envelope to From_-line, don't append a second @owndomain if username already has one.

2 1

Re: [Dovecot] (Single instance) attachment storage
by Damon Atkins 25 Jul '10

25 Jul '10

Just keep in mine Signed Emails, the email contents needs to be present back to the client as it came, so the client says the email has not been altered.

2 1

[Dovecot] Unknown password scheme SSHA512
by Patrick Westenberg 24 Jul '10

24 Jul '10

Hello, I installed dovecot via Debians apt package manager. The passwords are stored as SHA256 hash in a PostgreSQL database. default_pass_scheme in dovecot-sql.conf is set to SHA256. However, smtp-auth fails. Jul 24 00:31:07 smtp01 dovecot: auth(default): sql(mail(a)jasbafliesen.de): Unknown password scheme SHA256 Can anybody help me? Regards Patrick

2 2

Re: [Dovecot] SSL / TLS Problem
by Leander S. 23 Jul '10

23 Jul '10

Am 23.07.10 02:59, schrieb Andrew Bruce: > eel free to post this to the running conversation on the list (strip my > email address from this email though please) The issue was a case sensitive typo. When Setting up your Thunderbird don't type in eMail Addresses & Usernames including uppercase letters! DON'T: User(a)Domain.tld BUT therefore: user(a)domain.tld I faced that Problem only when I was using dyndns as domain service provider.

3 5

[Dovecot] Shared folders issue
by Emmanuel Gonzalez Carmona 23 Jul '10

23 Jul '10

Hello guys, I have an issue with shared folders: 1) The USERA shares his INBOX with USERB 2) USERB subscribes the USERA share without problems. 3) USERA deletes all his / or some directories from his INBOX (Trash, Drafts and Sent) 4) USERA logouts and makes login, so dovecot recreates the folders. 5) USERB gains access to subscrive those folders (Trash, Drafts and Sent) this is my namespace configuration: ... namespace private { separator = / prefix = inbox = yes #list = yes #subscriptions = yes } namespace shared { separator = / prefix = "shared/%%u/" location = maildir:/maildirs/%%d/%%u/Maildir subscriptions = no list = children } ... any ideas? Thanx in advance. -- Emmanuel Gonzalez Babel S.r.l. - http://www.babel.it <http://www.babel.it/>

2 1

[Dovecot] Go Away Message after the first successful login on proxy server
by Tomislav Mihalicek 23 Jul '10

23 Jul '10

hello i have a dovecot 1.2.11 and i have implementation of 2 dovecot machines, one proxy one storage part. everything is working fine, i only have one question regarding the message that should go away after the first successful login on proxy server. how to remove it on proxy server? May 7 16:04:19 proxy-server dovecot: pop3-login: proxy(tmihal(a)example.com): started proxying to 192.168.1.100:110: user=<tmihal(a)example.com>, method=PLAIN, rip=192.168.22.222, lip=192.168.1.100:109 [root@dougie:/usr/local/src/dovecot-1.2-managesieve]/etc/init.d/dovecot restart Restarting DovecotIf you have trouble with authentication failures, enable auth_debug setting. See http://wiki.dovecot.org/WhyDoesItNotWork This message goes away after the first successful login. -- View this message in context: http://old.nabble.com/Go-Away-Message-after-the-first-successful-login-on-p… Sent from the Dovecot mailing list archive at Nabble.com.

2 3

[Dovecot] dovecot director service
by Xavier Pons 23 Jul '10

23 Jul '10

hi, we are using the dovecot-rc1 version, and we are testing the director service, as there is little documentation on this service, a pair of questions.. if i'm not wrong, the proxy_maybe it's not implemented, yet? will be soon? this limitation does not allow use the same two directors servers like mail backend servers? the fairlure of one director server it's automatically detected or require manual intervention? thanks and sorry for so many questions... Xavier

4 18

[Dovecot] Doveadm protocol for parallel user processing
by Timo Sirainen 23 Jul '10

23 Jul '10

A lot of doveadm commands process users' mails. They can optionally process either a single user or multiple users (e.g. -A = all, -u '*(a)domain.org'). For example to expunge old mails from everyone's Trash, you'd use: doveadm expunge -A mailbox Trash savedbefore 30d The problem is, this doesn't work with the new director way of doing proxying. Only a single server can access a user's mails safely, so this command can't be run safely if there are multiple mail servers. It's also a bit problematic for regular proxying, but it's especially problematic with director: Since users aren't permanently assigned anywhere, it's not even possible to build a user <-> host mapping and run the command only for those users in their assigned server. First I started thinking about adding another lib-storage backend that supports proxying to another server, maybe via IMAP or maybe via another protocol. Maybe I should do that some day anyway, but it seems a bit complex for this task. Then I also realized that even if all users are on local server, it would probably finish faster if doveadm could handle users in parallel in separate processes (due to disk I/O latencies and maybe other latencies). So, it seems like it would be a good idea to make doveadm internally a client/server architecture. When you start doveadm, it would be only the "brain" part, which connects to the worker doveadms either via local UNIX socket or to remote servers. Admin could configure how many doveadm worker processes the brain should connect per server (could be a per-server setting). So, what's needed to make this happen? 1. The actual client/server split and the protocol. Probably can be really simple and won't be anything interesting. Or maybe it becomes more interesting once I start thinking about it more, we'll see. :) 2. Authentication. 3. TLS-protection? After merging code from dovecot-2.0-sslstream branch this should be pretty easy. Although Dovecot should finally then add support for checking that CommonName/etc match the server name. Authentication -------------- For local UNIX sockets that are 0600 root, the authentication wouldn't be necessary. It could internally check that if the listener socket has these permissions, it would just announce that doveadm is already authenticated. Otherwise, and especially for TCP connections, there should be authentication. I was thinking about using already existing master users for this. Doveadm client says "I'm <masteruser>, my password is <pass>, and I want to access <user>'s mails". Auth process does the authentication and replies either success or failure, just like for similar IMAP/POP3/etc logins. It's possible to restrict what users a master user can log in as, like admin(a)domain.org could only log in as *(a)domain.org. This means that you could also enable doveadm protocol for external users, and let the domain administrators use doveadm directly to manage their own domain's users. PLAIN authentication mechanism would be easy to support. But this might be a good time to also introduce client side SASL library to Dovecot to support other auth mechanisms. But then again, maybe it doesn't really matter.. Privilege dropping ------------------ I hate it that with multiple UIDs doveadm processes currently have to be run as root and they only temporarily drop privileges. With client/server split it would be possible to get rid of this. Each doveadm worker process would then handle only a single user and then exit. This would be optional similar to how login processes are now, e.g.: service doveadm { # 1 = default = one user access per process, 0 = unlimited user accesses service_count = 1 } LMTP privilege dropping ----------------------- Completely unrelated to doveadm, but due to the above doveadm privilege dropping thinking I also started thinking about LMTP. It's also annoying that it runs as root, and only temporarily drops privileges. It could also avoid this by saving a mail only to a single user per process. The problem is that there can be multiple RCPT TO:s in a same session, but this can be handled by treating them similarly than when using LMTP proxying: Just connect to localhost again and proxy the mail there for each user separately. This could also be optionally done only when the process UID differs from the destionation user's UID. When? ----- These are too invasive changes to v2.0, so I guess they'll wait until v2.1. Luckily there won't be any hugely destabilizing changes going into v2.1, so maybe v2.1.0 release won't be too many months after v2.0.0. :)

1 2

[Dovecot] managesieve login fails
by Leander S. 23 Jul '10

23 Jul '10

Hi, when I try to make use of the managesieve capability maillog always shows: server dovecot: managesieve-login: Panic: file client.c: line 449 (client_set_auth_waiting): assertion failed: (client->to_auth_waiting == NULL) server dovecot: dovecot: child 5926 (login) killed with signal 6 (core not dumped) (ip=192.168.1.233) ... and Thunderbirds remote sieve optimizing plugin won't connect ... Otherwhise IMAP & POP authentication, etc. ... is working proper.

2 2

[Dovecot] dovecot 2.0rc2 [SERVERBUG] When trying to remove a folder which contains a subfolder
by Sven Kirmess 23 Jul '10

23 Jul '10

I'm going to risk to report something stupid again and waste resources... but [SERVERBUG] sounds like it should not happen. :) g create test g OK Create completed. h create test/test2 h OK Create completed. i list "test" "*" * LIST (\HasChildren) "/" "test" * LIST (\HasNoChildren) "/" "test/test2" i OK List completed. j delete "test" j NO [SERVERBUG] Internal error occurred. Refer to server log for more information. [2010-07-17 22:57:48] The log has the following entry: Jul 17 22:57:48 azati dovecot: [ID 583609 mail.error] imap(ski): Error: rmdir(/l/dovecot/ski/dbox/mailboxes/test) failed: File exists Which is correct $ ls /l/dovecot/ski/dbox/mailboxes/test/ test2 Deleting the mailboxes in sync does work. k delete "test/test2" k OK Delete completed. l delete "test" l OK Delete completed. m list "test" "*" m OK List completed. $ dovecot -n # 2.0.rc2: /etc/opt/dovecot/dovecot/dovecot.conf # OS: SunOS 5.10 i86pc zfs first_valid_uid = 100 mail_location = mdbox:/l/dovecot/%u/dbox passdb { driver = pam } protocols = imap service imap-login { inet_listener imap { port = 0 } } service imap { vsz_limit = 1073741824 } ssl = required ssl_cert = </etc/opt/dovecot/dovecot/certs/dovecot.pem ssl_key = </etc/opt/dovecot/dovecot/private/dovecot.pem userdb { driver = passwd } verbose_proctitle = yes protocol imap { imap_client_workarounds = tb-extra-mailbox-sep }

2 2

[Dovecot] Upgrade 1.1 to 1.2 double check
by Roderick A. Anderson 23 Jul '10

23 Jul '10

Read what I could find on possible upgrade issues and saw only one that might be a problem. I don't think it will but figured it was worth checking. Anything jump out at the more experienced users? dovecot -n (edited to protect the guilty. ie. me) attached. # 1.1.11: /etc/dovecot.conf # OS: Linux 2.6.22.19-vs2.3.0.34.1 i686 CentOS release 5.2 (Final) log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-info.log protocols: imap imaps listen: *:143 ssl_listen: *:993 login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login login_greeting_capability: yes valid_chroot_dirs: /var/mail first_valid_uid: 5000 last_valid_uid: 5000 first_valid_gid: 5000 last_valid_gid: 5000 mail_access_groups: mail mail_location: maildir:~/Maildir mail_debug: yes maildir_copy_preserve_filename: yes imap_client_workarounds: outlook-idle auth default: mechanisms: plain login CRAM-MD5 default_realm: example.com master_user_separator: * verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /var/mail/vhosts/%d/passwd.masterusers pass: yes master: yes passdb: driver: passwd-file args: username_format=%n /var/mail/vhosts/%d/passwd userdb: driver: passwd-file args: username_format=%n /var/mail/vhosts/%d/passwd socket: type: listen master: path: /var/run/dovecot/auth-master mode: 432 user: vmail socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix plugin: sieve: /var/mail/vhosts/%d/%n/dovecot.sieve

2 1

[Dovecot] problem mysql and dovecot 1.2
by debian＠robertain.com 23 Jul '10

23 Jul '10

Hi everybody , Since my version 1.2. I have a problem with the management of quotas. select * from virtual_users; +----+-----------+----------------------------------+---------------------------+----------+----------------+ | id | domain_id | password | email | quota_kb | quota_messages | +----+-----------+----------------------------------+---------------------------+----------+----------------+ | 1 | 1 | xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx | xxxxxx(a)domain.com | 10000000 | 0 | .................. Before my time in 1.2. I did this for the quota management: user_query = SELECT CONCAT('/var/vmail/',CONCAT(SUBSTRING_INDEX(email,'@',-1),'/',SUBSTRING_INDEX(email,'@',1))) AS home, 5000 AS uid, 5000 AS gid, CONCAT('maildir:storage=',quota_kb,':messages=',quota_messages) AS quota FROM virtual_users WHERE email='%u'; My configuration dovecot -n # 1.2.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.30-2-686 i686 Debian squeeze/sid ext3 log_path: /var/vmail/dovecot-deliver.log info_log_path: /var/vmail/dovecot-deliver.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps pop3s managesieve ssl_cert_file: /etc/ssl/certs/popimap.crt ssl_key_file: /etc/ssl/private/popimap.key verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 mail_max_userip_connections(managesieve): 10 mail_location: maildir:/var/vmail/%d/%n/Maildir mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)mydomain.com mail_plugins: quota sieve auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: static args: uid=5000 gid=5000 home=/var/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/sieve quota: dict:user::proxy::quotadict quota_rule: *:storage=100M quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 dict: quotadict: mysql:/etc/dovecot/dovecot-dict-sql.conf my configuration dovecot-sql.conf cat dovecot-sql.conf #protocols = imap imaps pop3 pop3s # Database driver: mysql, pgsql, sqlite driver = mysql connect = host=127.0.0.1 dbname=mailserver user=mailsuer password=***** default_pass_scheme = PLAIN-MD5 password_query = SELECT email,password FROM virtual_users WHERE email='%u'; #user_query = SELECT home, uid, gid, concat('*:storage=', quota_bytes, 'B') AS quota_rule FROM virtual_users WHERE userid = '%u' #user_query = SELECT maildir, 5000 AS uid, 5000 AS gid, CONCAT('*:storage=', quota_bytes, 'B') AS quota_rule FROM virtual_users WHERE userid = '%u' #user_query = SELECT maildir AS home , 5000 AS uid, 5000 AS gid, CONCAT('*:storage=',quota, 'B') AS quota_rule FROM virtual_users WHERE username = '%u' #user_query = SELECT maildir AS home, 5000 AS uid, 5000 AS gid, CONCAT('*:bytes=', CAST(quota AS CHAR)) AS quota_rule FROM quota WHERE username = '%u' AND active = '1 I used all these configurations but none work. yet but the quotas work through this option: quota_rule: *:storage=100M The problem is that quotas are not personalized. I'm looking for a way to use quotas, but using my mysql database. I galley for some time. So if someone has an idea I am willing

4 6

[Dovecot] quota-warning example script from wiki2
by Daniel Luttermann 22 Jul '10

22 Jul '10

Hi, in the wiki there's an example script for sending an email to an user that has exceeded his quota. Link: http://wiki2.dovecot.org/Quota/Configuration The dovecot deliver command line is: dovecot-lda -d $USER -o "plugin/quota=maildir:User quota:noenforcing" I wonder about -o: seems to be "undocumented" because I've found no information about this parameter. If this parameter is needed what if I use dict instead of maildir? Is the syntax different? Thanks. -- Daniel

2 1

[Dovecot] v2.0.rc3 released
by Timo Sirainen 22 Jul '10

22 Jul '10

http://dovecot.org/releases/2.0/rc/dovecot-2.0.rc3.tar.gz http://dovecot.org/releases/2.0/rc/dovecot-2.0.rc3.tar.gz.sig A lot of dsync fixes. I think I've fixed now all of the bugs ever reported about dsync and I'm hopeful that it's now stable. All the rest of Dovecot looks pretty good too. Maybe v2.0.0 will be out next week. Changes since rc2: * Single-dbox is now called "sdbox" instead of "dbox". "dbox" will stay as an alias for it for now. + Added mail_temp_dir setting, used by deliver and lmtp for creating temporary mail files. Default is /tmp. + doveadm: Added "director map" command to list user -> host mappings. - imap: Fixed checking if list=children namespace has children. - director: If all login processes died, director stopped reading proxy-notify input and caused future login processes to hang - mail_log plugin configuration was broken - Using more than 2 plugins could have caused broken behavior - mdbox: Race condition fixes related to copying and purging - dsync: Lots of fixes

5 14

[Dovecot] [2.0] Auth Cache
by Luigi Rosa 22 Jul '10

22 Jul '10

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Is there a way to trace the auth cache? Something like how many items are in the chache, how many bytes of the cache are used.... Thank you. Ciao, luigi - -- / +--[Luigi Rosa]-- \ In a dark time the eye begins to see. --Theodore Roethke -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkxInjwACgkQ3kWu7Tfl6ZQWrgCdEL9wy33xQiwU+ORKi5bNOawm DC4AnRci869XpYobkHfhw+b1WnapiJqk =cyE5 -----END PGP SIGNATURE-----

2 2

[Dovecot] Help with some features to do in a plugin
by Alex Baule 22 Jul '10

22 Jul '10

Hello Everyone.... I need to develop some plugins, but i can't know if is possible to do or not. 1 - There is a way to deny a email to be moved from one folder to another ? example: the user is only allowed to move mails in Spam Folder to Trash Folder. If yes, were i can find a code example or a plugin to extract some idea. 2 - It's possible to deny a user to create a subscription folder ? example: with autocreate plugin, i create a Spam Folder, but if the autocreate is not configured to this user, it can't create manually this same folder. If yes, were i can find a code example or a plugin to extract some idea. Tks !

2 2

[Dovecot] shared folders - dbox
by Hajo Locke 22 Jul '10

22 Jul '10

Hello, iam interested in using dbox format with dovecot2. Ist it possible to use shared folders with this storage format? i only see references to Maildir. Thanks, Hajo

2 1

[Dovecot] doveadm mailbox create -7 … returns 0
by Pascal Volk 22 Jul '10

22 Jul '10

Hi Timo, I'm using doveadm in my script to create [sm]dboxes. For some reason I forgot to remove the -7 option in my script. I wondered why no mailboxes were created and the script didn't report an error - it checks the exit status from doveadm. The problem: doveadm mailbox create -7 … returns 0 Regards, Pascal -- The trapper recommends today: f007ba11.1020305(a)localdomain.org

1 1

[Dovecot] NFS Maildirs
by Martijn de Munnik 22 Jul '10

22 Jul '10

Hi, We have our user homedirs on nfs so I enabled nfs parameters in dovecot.conf. Everything works fine but when I want to delete a homedir of a user I can't delete it because I can't remove the .nfs files in the Maildir. I don't want to stop dovecot, remove the homedir and start dovecot. Is there another way to accomplish this. Thanks, Martijn # 1.2.12: /etc/opt/redknot/dovecot.conf Warning: fd limit 256 is lower than what Dovecot can use under full load (more than 4096). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: SunOS 5.11 sun4v log_path: /var/log/dovecot.log protocols: imap imaps managesieve ssl_cert_file: /etc/opt/redknot/ssl/secure.redknot.nl.cer ssl_key_file: /etc/opt/redknot/ssl/secure.redknot.nl.key disable_plaintext_auth: no login_dir: /opt/redknot/var/run/dovecot/login login_executable(default): /opt/redknot/libexec/dovecot/imap-login login_executable(imap): /opt/redknot/libexec/dovecot/imap-login login_executable(managesieve): /opt/redknot/libexec/dovecot/managesieve-login login_processes_count: 5 login_max_processes_count: 1024 max_mail_processes: 2048 first_valid_uid: 200 first_valid_gid: 10 mail_location: maildir:~/Maildir mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /opt/redknot/libexec/dovecot/imap mail_executable(imap): /opt/redknot/libexec/dovecot/imap mail_executable(managesieve): /opt/redknot/libexec/dovecot/managesieve mail_plugins(default): antispam mail_plugins(imap): antispam mail_plugins(managesieve): mail_plugin_dir(default): /opt/redknot/lib/dovecot/imap mail_plugin_dir(imap): /opt/redknot/lib/dovecot/imap mail_plugin_dir(managesieve): /opt/redknot/lib/dovecot/managesieve auth default: mechanisms: plain login passdb: driver: pam args: other userdb: driver: passwd socket: type: listen client: path: /opt/redknot/var/run/dovecot/auth-client mode: 432 master: path: /opt/redknot/var/run/dovecot/auth-master mode: 384 plugin: antispam_signature: X-DSPAM-Signature antispam_signature_missing: error antispam_trash: Trash antispam_spam: Junk antispam_allow_append_to_spam: yes antispam_dspam_binary: /opt/redknot/bin/dspam antispam_dspam_args: --deliver;--user;%u;--debug antispam_dspam_result_header: X-DSPAM-Result antispam_dspam_result_blacklist: Virus YoungGuns Kasteleinenkampweg 7b 5222 AX 's-Hertogenbosch T. 073 623 56 40 F. 073 623 56 39 www.youngguns.nl KvK 18076568

2 2

[Dovecot] Applemail did not sync when MailTags enabled
by mailinglists＠belfin.ch 22 Jul '10

22 Jul '10

Hi I run dovecot 1.2.11. One of my users turned on MailTags in his AppleMail with the effect that he could not anymore synchronize his imap folders. No error message, just endless waiting. Has anybody experienced a similar behaviour? Thanks John

1 0

[Dovecot] Feature request: usernames and passwords
by Thanos Chatziathanassiou 21 Jul '10

21 Jul '10

A relatively recent development that spammers got wind of is users that have username==password, with/without the domain. I am tracking numerous 1-off attempts from bots to gain access to mailboxes this way. Situation isn't made any better if you're also using dovecot as SMTP AUTH provider for I am ashamed to admit I've relayed some spam that way. Would it be possible to deny login if username==password with a (non?)polite/custom message to go change your password to something less obvious ?

10 18

[Dovecot] imap + sa-learn on second Server
by spamvoll＠googlemail.com 21 Jul '10

21 Jul '10

hi.. im using two Server.. A smtp. and a imap. host anyone know an easy way to sa-learn (on smtp.) the imap spam folder on (imap.) thx Hans

2 1

[Dovecot] Dovecot 2.0 progress?
by Guy 21 Jul '10

21 Jul '10

Hi, Been having a look at the roadmap on the wiki for Dovecot 2.0 and I was wondering how that's progressing? Are you able to offer a guesstimate on how far it is from stable Timo? Just asking because we're moving to new servers soon and I'm considering using the opportunity to switch from Dovecot/Maildrop/Maildir to Dovecot/deliver/mdbox if 2.0 is likely to be reasonably safe to use in the next month or so. Thanks Guy -- Don't just do something...sit there!

2 1

[Dovecot] about variables
by alex 21 Jul '10

21 Jul '10

Hi In http://wiki.dovecot.org/Variables I found: %s service imap, pop3, smtp, deliver and that can be use in userdb and SQL query string. How exactly can I use %s in the query string if I want for ex to disable a service (just one service - ex pop3) for a specific user. Alex

2 3

[Dovecot] Dinamic 'mail_location' for each user
by Thiago Henrique 21 Jul '10

21 Jul '10

Hello, I have a lot of domains in a mail server, so I make a balanced allocation of mailboxes in the storage disks. That improves performance of access to records. Therefore, I want to overwrite 'mail_location' directive for each user. But I also want to use the modifier 'H' to spray the mailboxes of the same partition in a hash. Then, each user has your own 'mail_location' that I would like load from database. Like this: mdbox:/var/spool/imap/partition1/%256HRu/%u:INDEX=/var/lib/imap/user/% 256HRu/%u partition1 is in range [partition1 .. partiton7] In my tests the '%256HRu/%u' kind of 'mail_location' is not being interpreted by Dovecot. Can Dovecot to interpret 'mail_location' load from database ? Thank you. -- []'s Thiago Henrique Network Administration Digirati Networks K8 Networks

3 5

[Dovecot] Dovecot 1.2.12 released for Solaris 8, 9 and 10
by Dennis Clarke 21 Jul '10

21 Jul '10

Just an FYI, there are SMF aware packages for dovecot 1.2.12 avail from the Blastwave mirrors now. All world wide mirrors will sync within hours but the primary ( at ISC ) is at http://download.blastwave.org Please use pkgutil to fetch software packages. # pkginfo -l CSWdovecot PKGINST: CSWdovecot NAME: dovecot - Dovecot is an open source IMAP and POP3 server CATEGORY: application ARCH: i386 VERSION: 1.2.12,REV=2010.07.06 BASEDIR: /opt/csw VENDOR: http://www.dovecot.org/ packaged by Blastwave.org Inc. DESC: CSWbind - Dovecot is an open source IMAP and POP3 server PSTAMP: titan20100706031415 INSTDATE: Jul 06 2010 01:58 HOTLINE: http://www.blastwave.org/ EMAIL: support(a)blastwave.org STATUS: completely installed FILES: 573 installed pathnames 6 shared pathnames 37 directories 91 executables 130828 blocks used (approx) Also avail on all Sparc servers of course. -- Dennis Clarke dclarke(a)opensolaris.ca <- Email related to the open source Solaris dclarke(a)blastwave.org <- Email related to open source for Solaris

1 0

[Dovecot] namespaces
by jorge martinez 21 Jul '10

21 Jul '10

Hello, i have an issue with vpopmail, this created a sub folder named "0" and all the new users created inside this folder into the domain folder. Weel i don understand why vpopmail do that, but i want to know if the option in dovecot.conf namespaces i can make it to search the Maildir in both directories. name domain/user & name domain/0/name user. CAn you help me??? Any options.

2 1

[Dovecot] Sieve Installation
by Carsten Laun-De Lellis 21 Jul '10

21 Jul '10

Hallo Ich habe ein Problem bei der Installation von Sieve: Konfiguration: Opensuse 11.2 64bit, dovecot 1.2.9, postfix, amavis, spamassassin. Wenn ich versucht dovecot sieve zu übersetzen bekomme ich immer folgende Fehlermeldung. Making all in libsieve make[1]: Entering directory `/download/dovecot-sieve-1.1.8/src/libsieve' /bin/sh ../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I../.. -I -I/src/lib -I../../src -g -O2 -DENABLE_REGEX -MT addr.lo -MD -MP -MF .deps/addr.Tpo -c -o addr.lo addr.c libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../.. -I -I/src/lib -I../../src -g -O2 -DENABLE_REGEX -MT addr.lo -MD -MP -MF .deps/addr.Tpo -c addr.c -fPIC -DPIC -o .libs/addr.o In file included from addr.y:35: ../../src/xmalloc.h:19:17: error: lib.h: No such file or directory make[1]: *** [addr.lo] Error 1 make[1]: Leaving directory `/download/dovecot-sieve-1.1.8/src/libsieve' make: *** [all-recursive] Error 1 Wäre echt toll, wenn mir jemand einen Tipp geben könnte. Mit freundlichem Gruß Carsten Laun-De Lellis Dipl.-Ing. Elektrotechnik Certified Information Systems Auditor (CISA) Hauptstrasse 13 D-67705 Trippstadt Phone: +49 (6306) 992140 Mobile: +49 (151) 27530865 email: carsten.laun-delellis(a)delellis.net

2 1

[Dovecot] Sieve Installation
by Carsten Laun-De Lellis 20 Jul '10

20 Jul '10

Hallo Versuche unter OpenSuse11.2, 64bit sieve zu installieren. Konfig: OpensSuse 11.2, dovecot 1.2.9, postfix , spamassassin, amavis, mysql Wenn ich versucht dovecot sieve zu übersetzen bekomme ich immer folgende Fehlermeldung: Mit freundlichem Gruß Carsten Laun-De Lellis Dipl.-Ing. Elektrotechnik Certified Information Systems Auditor (CISA) Hauptstrasse 13 D-67705 Trippstadt Phone: +49 (6306) 992140 Mobile: +49 (151) 27530865 email: carsten.laun-delellis(a)delellis.net

1 0

[Dovecot] Login process connection routing
by Brandon Davidson 20 Jul '10

20 Jul '10

Timo, Just out of curiosity, how are incoming connections routed to login processes when run with: service imap-login { service_count = 0 } I've been playing with this on our test director, and the process connection counts look somewhat unbalanced. I'm wondering if there are any performance issues with having a single process handle so many connections. It seems fine (system load is actually lower than with service_count = 1), but I thought I'd ask. /usr/sbin/dovecot \_ dovecot/imap-login \_ dovecot/imap-login [1 connections (1 TLS)] \_ dovecot/imap-login \_ dovecot/imap-login [5 connections (5 TLS)] \_ dovecot/imap-login [1 connections (1 TLS)] \_ dovecot/imap-login [4 connections (4 TLS)] \_ dovecot/imap-login [1 connections (1 TLS)] \_ dovecot/imap-login [1 connections (1 TLS)] \_ dovecot/imap-login [315 connections (315 TLS)] \_ dovecot/imap-login [63 connections (63 TLS)] \_ dovecot/imap-login [12 connections (12 TLS)] \_ dovecot/imap-login \_ dovecot/imap-login [10 connections (10 TLS)] \_ dovecot/imap-login [2 connections (2 TLS)] \_ dovecot/imap-login [370 connections (370 TLS)] \_ dovecot/imap-login [24 connections (24 TLS)] -Brad

3 2

[Dovecot] Doveadm director flush/remove
by Brandon Davidson 20 Jul '10

20 Jul '10

I've got a couple more issues with the doveadm director interface: 1) If I use "doveadm director remove" to disable a host with active users, the director seems to lose track of users mapped to that host. I guess I would expect it to tear down any active sessions by killing the login proxies, like I'd done 'doveadm direct add HOSTNAME 0 && doveadm director flush HOSTNAME' before removing it? Here's what I see with an active open connection: [root@cc-popmap7 ~]# doveadm director status brandond Current: 10.142.0.179 (expires 2010-07-14 01:26:14) Hashed: 10.142.0.179 Initial config: 10.142.0.161 [root@cc-popmap7 ~]# doveadm director remove 10.142.0.179 [root@cc-popmap7 ~]# doveadm director status brandond Current: not assigned Hashed: 10.142.0.174 Initial config: 10.142.0.161 2) "doveadm director flush" returns the wrong usage: [root@cc-popmap7 ~]# doveadm director flush doveadm director remove [-a <director socket path>] <host> 3) "doveadm director flush" all breaks the ring: [root@cc-popmap7 ~]# doveadm director flush all Jul 14 01:26:33 cc-popmap7 dovecot: director: Error: Director 10.142.0.180:1234/right disconnected Jul 14 01:26:33 cc-popmap7 dovecot: director: Error: Director 10.142.0.180:1234/left disconnected Jul 14 01:26:33 oh-popmap7 dovecot: director: Error: director(10.142.0.162:1234/left): Invalid HOST-FLUSH args Jul 14 01:26:33 oh-popmap7 dovecot: director: Error: director(10.142.0.162:1234/right): Invalid HOST-FLUSH args For some reason, flushing a host address only disconnects one side: [root@cc-popmap7 ~]# doveadm director flush 10.142.0.160 Jul 14 01:28:23 cc-popmap7 dovecot: director: Error: Director 10.142.0.180:1234/right disconnected Jul 14 01:28:23 oh-popmap7 dovecot: director: Error: director(10.142.0.162:1234/left): Invalid HOST-FLUSH args -Brad

4 25

[Dovecot] [dovecot] Dovecot Migration so far
by Mark Moseley 20 Jul '10

20 Jul '10

We've been doing our own beta testing of Dovecot 2.0-beta4 IMAP (both direct IMAP and webmail-fronted), and we've had nothing but glowing compliments from our beta users/victims. I've also been running a lone box with the latest mercurial build and that's been running just fine too. All mail data is on NFS, but I've put indexes on the local disk, which has worked just dandy so far. Everything's been great and all I've seen amiss are a few random problems -- all of which are are barely impacting us and I mention only for the sake of feedback. All boxes are Debian Lenny i386, running 2.6.33.1. One oddity is that I see lots of messages like this (I've obfuscated paths/IPs/usernames, so assume paths are all actually correct) for a variety of different mailboxes prior to their indexes directory getting initially created: Apr 02 13:25:24 imap(mail@box): Error: creat(/var/tmp/Indexes/14/75/mail(a)box/dovecot.mailbox.log) failed: No such file or directory Judging by the mtimes of the containing directories, the directory was created a couple of seconds after the error gets logged, so I'm guessing mailbox_log_alloc is just getting called too early. It obviously just happens that first time. Doesn't seem to actually be hurting anything, that I can tell. One other kind of weird thing I saw was that originally I had my indexes on a dedicated partition with ext4 (Debian Lenny, i386, 2.6.33.1), I was seeing scattered messages like this: Mar 29 18:02:38 imap(mail@box): Error: FETCH [] for mailbox INBOX UID 3244 got too little data: 1116 vs 1087383 Mar 29 18:02:38 imap(mail@box): Error: Corrupted index cache file /var/tmp/Indexes/12/dc/mail(a)box/.INBOX/dovecot.index.cache: Broken virtual size for mail UID 3244 The message corresponding with UID 3244 was around 1116 bytes (+32 bytes, IIRC), so no clue where the 1087383. In all the cases of that error I saw, the lefthand number of bytes was very closer to correct and the righthand was way way off, and the S= flag in the filename was correct too. I'm guessing that the random righthand number was just due to corrupted cache. When I reformatted that partition as ext3, the error went almost completely away (just a few total over the past few days, as opposed to a few per hour when it was on ext4). I don't even have an educated guess as to why that'd happen. A wild guess would be that ext4's delayed allocation was causing problems. Even under ext4, it was still pretty rare and only, say, 1 out of 100 imap logins. And ext3 performance on the indexes partition so far has been just fine, so I don't plan on switching back to ext4 -- though if anyone has any experience with putting indexes on reiserfs and/or xfs versus ext3, I'd love to hear your thoughts. I've also seen a couple of these in the past few days (on beta4, not repo version -- haven't been running repo version long enough to say if it'd do the same): Mar 31 21:52:54 imap(mail@box): Error: fdatasync(/mail/username/mail@box/Maildir/dovecot-uidlist) failed: Input/output error Mar 31 21:52:54 imap(mail@box): Error: Raw backtrace: /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot.so.0 [0xb77c0b71] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot.so.0 [0xb77c0bef] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot.so.0(i_error+0) [0xb77c0ea8] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0(mail_index_sync_begin_to+0x9a9) [0xb7837ca9] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0(mail_index_sync_begin+0x56) [0xb7837d56] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0(maildir_sync_index_begin+0x51) [0xb78734d1] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0 [0xb78716eb] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0(maildir_storage_sync_force+0x4d) [0xb78719bd] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0(maildir_uidlist_lookup+0x96) [0xb7877646] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0 [0xb787215a] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0(maildir_sync_index+0x7f0) [0xb78729d0] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0 [0xb78715b6] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0(maildir_storage_sync_init+0x162) [0xb7871b92] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x39) [0xb7815759] -> dovecot/imap [mail@box 215.108.28.102 UID](imap_sync_init+0x54) [0x805efa4] -> dovecot/imap [mail@box 215.108.28.102 UID](cmd_sync_delayed+0x223) [0x805f2a3] -> dovecot/imap [mail@box 215.108.28.102 UID](client_output+0xb6) [0x8056de6] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot.so.0 [0xb77d5d4a] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xf5) [0xb77cd1d5] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot.so.0(io_loop_run+0x30) [0xb77cc220] -> /opt/dovecot-2.0.beta4/lib/dovecot/libdovecot.so.0(master_service_run+0x2a) [0xb77b9e1a] -> dovecot/imap [mail@box 215.108.28.102 UID](main+0x1c5) [0x805f8e5] -> /lib/libc.so.6(__libc_start_main+0xe5) [0xb764d455] -> dovecot/imap [mail@box 215.108.28.102 UID] [0x804e621] Mar 31 21:52:54 master: Error: service(imap): child 4500 killed with signal 6 (core dumps disabled) In 4 days of beta testing with a fair number of users, I've seen maybe 4 of these backtraces total, so not exactly a big issue. These are all super minor things. Everything's been fantastic so far.

3 6

[Dovecot] Dovecot v2.0.rc2 (875598cd7e26): Core dump upon client login
by Thomas Leuxner 20 Jul '10

20 Jul '10

Latest HG dies upon client login. Rolling back to 2.0.rc2 (7dd7adba1c9e) restores functionality. Dump attached. Jul 17 07:31:04 spectre dovecot: master: Dovecot v2.0.rc2 (875598cd7e26) starting up […] Jul 17 07:32:06 spectre dovecot: master: Error: service(imap): child 29169 killed with signal 11 (core dumped) GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu"... warning: Can't read pathname for load map: Input/output error. Reading symbols from /usr/lib/dovecot/libdovecot-storage.so.0...Reading symbols from /usr/lib/debug/usr/lib/dovecot/libdovecot-storage.so.0.0.0...done. done. Loaded symbols for /usr/lib/dovecot/libdovecot-storage.so.0 Reading symbols from /usr/lib/dovecot/libdovecot.so.0...Reading symbols from /usr/lib/debug/usr/lib/dovecot/libdovecot.so.0.0.0...done. done. Loaded symbols for /usr/lib/dovecot/libdovecot.so.0 Reading symbols from /lib/libdl.so.2...done. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/librt.so.1...done. Loaded symbols for /lib/librt.so.1 Reading symbols from /lib/libc.so.6...done. Loaded symbols for /lib/libc.so.6 Reading symbols from /lib/ld-linux-x86-64.so.2...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib/libpthread.so.0...done. Loaded symbols for /lib/libpthread.so.0 Reading symbols from /usr/lib/dovecot/modules/lib01_acl_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/modules/lib01_acl_plugin.so...done. done. Loaded symbols for /usr/lib/dovecot/modules/lib01_acl_plugin.so Reading symbols from /usr/lib/dovecot/modules/lib02_imap_acl_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/modules/lib02_imap_acl_plugin.so...done. done. Loaded symbols for /usr/lib/dovecot/modules/lib02_imap_acl_plugin.so Reading symbols from /usr/lib/dovecot/modules/lib10_quota_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/modules/lib10_quota_plugin.so...done. done. Loaded symbols for /usr/lib/dovecot/modules/lib10_quota_plugin.so Reading symbols from /usr/lib/dovecot/modules/lib11_imap_quota_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/modules/lib11_imap_quota_plugin.so...done. done. Loaded symbols for /usr/lib/dovecot/modules/lib11_imap_quota_plugin.so Reading symbols from /usr/lib/dovecot/modules/lib15_notify_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/modules/lib15_notify_plugin.so...done. done. Loaded symbols for /usr/lib/dovecot/modules/lib15_notify_plugin.so Reading symbols from /usr/lib/dovecot/modules/lib20_mail_log_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/modules/lib20_mail_log_plugin.so...done. done. Loaded symbols for /usr/lib/dovecot/modules/lib20_mail_log_plugin.so Core was generated by `dovecot/imap'. Program terminated with signal 11, Segmentation fault. [New process 29301] #0 notify_transaction_commit (t=0x1ae5a40, changes_r=0x7fff65c9cd10) at notify-storage.c:164 164 notify-storage.c: No such file or directory. in notify-storage.c #0 notify_transaction_commit (t=0x1ae5a40, changes_r=0x7fff65c9cd10) at notify-storage.c:164 lt = (struct notify_transaction_context *) 0x0 #1 0x00007f4518416aed in mailbox_transaction_commit_get_changes (_t=<value optimized out>, changes_r=0x7fff65c9cd10) at mail-storage.c:1194 _data_stack_cur_id = 4 t = (struct mailbox_transaction_context *) 0x1ae5a40 ret = <value optimized out> #2 0x00007f4518416b26 in mailbox_transaction_commit (t=0x28) at mail-storage.c:1178 changes = {pool = 0xbc1, uid_validity = 7456, saved_uids = {arr = {buffer = 0x1ae4960, element_size = 0}, v = 0x1ae4960, v_modifiable = 0x1ae4960}, ignored_modseq_changes = 28149240} ret = <value optimized out> #3 0x0000000000412823 in imap_fetch_deinit (ctx=0x1ad85e0) at imap-fetch.c:568 handler = (const struct imap_fetch_context_handler *) 0x1aedca8 #4 0x000000000040a823 in cmd_fetch_finish (ctx=0x28) at cmd-fetch.c:144 cmd = (struct client_command_context *) 0x1ad83b8 tagged_reply = 0x419c38 "OK Fetch completed." ok_message = 0x419c38 "OK Fetch completed." #5 0x000000000040ad0a in cmd_fetch (cmd=0x1ad83b8) at cmd-fetch.c:236 client = <value optimized out> ctx = (struct imap_fetch_context *) 0x1ad85e0 args = (const struct imap_arg *) 0x1adac10 next_arg = <value optimized out> list_arg = (const struct imap_arg *) 0x7f45181b8c0d search_args = (struct mail_search_args *) 0x1ae49b8 messageset = 0x1adad00 "5195:*" ret = <value optimized out> #6 0x000000000041035c in client_command_input (cmd=0x1ad83b8) at imap-client.c:652 client = (struct client *) 0x1ad7c58 command = <value optimized out> __FUNCTION__ = "client_command_input" #7 0x000000000041040d in client_command_input (cmd=0x1ad83b8) at imap-client.c:702 client = (struct client *) 0x1ad7c58 command = (struct command *) 0x8 __FUNCTION__ = "client_command_input" #8 0x0000000000410585 in client_handle_input (client=0x1ad7c58) at imap-client.c:743 _data_stack_cur_id = 3 ret = 66 remove_io = <value optimized out> handled_commands = false __FUNCTION__ = "client_handle_input" #9 0x0000000000410fb2 in client_input (client=0x1ad7c58) at imap-client.c:794 cmd = <value optimized out> output = (struct ostream *) 0x1ad8238 bytes = <value optimized out> __FUNCTION__ = "client_input" #10 0x00007f45181b3ceb in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:212 ctx = (struct ioloop_handler_context *) 0x1aab7d0 event = (const struct epoll_event *) 0x1aab840 list = (struct io_list *) 0x1ad8310 io = (struct io_file *) 0x1ad82d0 tv = {tv_sec = 1799, tv_usec = 999737} t_id = 2 msecs = <value optimized out> ret = 1 call = <value optimized out> #11 0x00007f45181b2e68 in io_loop_run (ioloop=0x1aab5c0) at ioloop.c:350 No locals. #12 0x00007f45181a27d3 in master_service_run (service=0x1aab490, callback=0x28) at master-service.c:495 No locals. #13 0x0000000000419171 in main (argc=1, argv=0x1aab370) at main.c:358 service_flags = <value optimized out> storage_service_flags = <value optimized out> postlogin_socket_path = 0x0 username = 0x0 c = <value optimized out> set_roots = {0x41c360, 0x0} # dovecot -n (older HG) # 2.0.rc2 (7dd7adba1c9e): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 5.0.5 auth_verbose = yes mail_location = mdbox:~/mdbox mail_plugins = acl quota managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest namespace { hidden = no inbox = yes location = prefix = separator = / type = private } namespace { list = yes location = maildir:/var/vmail/public:LAYOUT=fs:INDEX=~/public prefix = Public/ separator = / subscriptions = no type = public } passdb { args = username_format=%u /var/vmail/auth.d/%d/passwd driver = passwd-file } plugin { acl = vfile:/var/vmail/conf.d/%d/acls:cache_secs=300 mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename quota = dict:user::file:%h/mdbox/dovecot-quota quota_rule = *:storage=1GB quota_rule2 = Trash:storage=+10%% sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/vmail/conf.d/%d/sieve } protocols = imap lmtp service auth-worker { user = doveauth } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = doveauth } service imap-login { inet_listener imap { address = 1.2.3.4 port = 143 } inet_listener imaps { port = 0 } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/certs/host_domain_tld.crt ssl_key = </etc/ssl/private/host_domain_tld.key syslog_facility = local1 userdb { args = username_format=%u /var/vmail/auth.d/%d/passwd driver = passwd-file } verbose_proctitle = yes protocol lmtp { mail_plugins = $mail_plugins sieve } protocol imap { mail_plugins = $mail_plugins imap_acl imap_quota mail_log notify }

2 18

[Dovecot] About Logging
by Henrique Fernandes 20 Jul '10

20 Jul '10

It is possible to make dovecot do not log any request from a determined host? Because, we gonna use ldirectord for foward request and etc and the ldirectord makes an connecting every 2 seconds to find out if the server is ok, and also make a login in imap and pop3 to check this service as well. Is there any how to make dovecot do not log entries for a determined host ? The logs get too many info that we don need! Any ideias ? Thanks! * *i have sent a msg like this, but i got no answer i thought i might have not deliver into the mailist! I am sorry if it already have it!* *[]'sf.rique

2 4

[Dovecot] Unknown column username in where clause
by Daniel Luttermann 20 Jul '10

20 Jul '10

Version: Dovecot 2.0 rc2 I'm testing Dovecot with MySQL quotas but I get always this error for incoming mails: tux dovecot: lmtp(4928): Error: user testuser(a)dlutt.de: Auth USER lookup failed tux dovecot: auth: Error: mysql: Query failed, retrying: Unknown column 'username' in 'where clause' I dont' know where the field "username" should come from because I don't use this field (or query). The relevant files are: dovecot-sql.conf.ext ==================== password_query = SELECT userid AS user, password, \ home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid, \ concat('*:bytes=', quota_bytes) as userdb_quota_rule \ FROM users WHERE userid = '%u' auth-sql.conf.ext ================= passdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } userdb { driver = prefetch } userdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } 90-quota.conf ============= plugin { quota = dict:user::proxy::quota quota_rule = *:storage=0 } dovecot-dict-sql.conf.ext ========================= map { pattern = priv/quota/storage table = quota username_field = userid value_field = bytes } map { pattern = priv/quota/messages table = quota username_field = userid value_field = messages } I've grepped through all config files but I can't find any (active) query which uses the above "where username=...". The quota db gets correctly updated if an user logs in so the problem only exists during mail delivery. My SQL tables were crated as follows: CREATE TABLE IF NOT EXISTS `users` ( `userid` varchar(100) NOT NULL, `password` varchar(64) NOT NULL, `home` varchar(255) NOT NULL, `uid` int(11) NOT NULL, `gid` int(11) NOT NULL, `quota_bytes` varchar(10) NOT NULL, PRIMARY KEY (`userid`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1; CREATE TABLE IF NOT EXISTS `quota` ( `userid` varchar(100) NOT NULL, `bytes` bigint(20) NOT NULL default '0', `messages` int(11) NOT NULL default '0', PRIMARY KEY (`userid`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1; -- Daniel

3 4

[Dovecot] Dovecot 1.1 migration to 1.2
by Claudio Prono 20 Jul '10

20 Jul '10

Hello all, Here is my dovecot 1.1 conf: # 1.1.3: /etc/dovecot/dovecot.conf log_path: /var/log/dovecot-err.log info_log_path: /var/log/dovecot-inf.log protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login first_valid_uid: 51 last_valid_uid: 51 first_valid_gid: 51 last_valid_gid: 51 mail_location: maildir:/var/mail/virtual/%d/%u mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): outlook-idle imap_client_workarounds(imap): outlook-idle imap_client_workarounds(pop3): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %Mf auth default: passdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot/dovecot-mysql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 plugin: quota: maildir quota: maildir:user quota quota_warning: storage=80%% /usr/bin/quota_warning.sh 80 quota_warning2: storage=90%% /usr/bin/quota_warning.sh 90 quota_warning3: storage=99%% /usr/bin/quota_warning.sh 90 Now, is out the OpenSuSE 11.3, and i have noticed it uses dovecot 1.2.11. My question is: there is any difference or incompatibility in my configuration for the 1.2 serie of dovecot? Any hint for a clean migration to the new dovecot? Cordially, Claudio Prono. -- -------------------------------------------------------------------------------- Claudio Prono OPST System Developer Gsm: +39-349-54.33.258 @PSS Srl Tel: +39-011-32.72.100 Via San Bernardino, 17 Fax: +39-011-32.46.497 10141 Torino - ITALY http://atpss.net/disclaimer -------------------------------------------------------------------------------- PGP Key - http://keys.atpss.net/c_prono.asc

4 4

[Dovecot] namespace trouble
by Kevin Faulkner 20 Jul '10

20 Jul '10

I am having some trouble with dovecot 1.2.12 and some namespace issues, or at least that's what I think is the issue. I setup a virtual mailhosting using mysql and postfix. I can receive email and send email without a problem, but when I use mutt to sign in to dovecot, I can't list any Folders, it see's INBOX but it doesn't see any mail. I generally try to not post my problems online, but I searched around on the Internet and I couldn't find anything similar to this issue. I also used kmail to connect to the and it is able to see the mail, but when I can't create any folders. mutt connecting option: mutt set spoolfile=imaps://server.here/INBOX." Here is the mutt debug (mutt -d 3) 4< a0001 OK Capability completed. 4< * LIST (\Noselect) "." "" 4< a0002 OK List completed. 4> a0003 STATUS "Drafts" (MESSAGES) a0004 SELECT "INBOX" 4< a0003 NO Unknown namespace. 4< * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) dovecot.conf (part of it, tell me if you want more) mail_location = maildir:/home/vmail/%d/%n/Maildir log_path = /var/log/dovecot.log namespace private { separator = . prefix = INBOX. inbox = yes hidden = no list = yes } listen = * protocol imap { } protocol pop3 { } protocol lda { log_path = /home/vmail/dovecot-deliver.log auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster@.com mail_plugins = sieve global_script_path = /home/vmail/globalsieverc } auth default { mechanisms = plain userdb static { args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes } Thank you Very much.

3 2

[Dovecot] Unable to get Dovecot LDA/deliver working
by Frank van Amsterdam 20 Jul '10

20 Jul '10

I want to setup Dovecot LDA, but I don't understand what I'm doing anymore. I have to note that I'm a Linux beginner. I've been trying now for several months and I'm about to give up. Till so far I'm having no result. :-( My current setup is done as described at http://www.linuxmail.info. We use Postfix 2.3.3 (with Postgrey, Spamassassin and ClamAV), Dovecot 1.2.11 and OpenLDAP 2.4.1 on CentOS 5.5. All incoming e-mail are delivered by Postfix in the users' maildir. We use this as a base for SOGo, our groupware solution and it runs smoothly. I have to setup a new mailserver, because we're standardising on Debian. My employer wants to have new functions like out-of-office-replies and forwarding. I want to make use of sieve. Unfortunately I don't know anyone who can help me. My problem is that I don't understand how the delivery process is working. I've read much documentation from Postfix and Dovecot, but I find it too difficult to understand. What do I understand? I know that I have to make changes in /etc/dovecot, /etc/postfix/main.cf and /etc/postfix/master.cf as described at http://wiki.dovecot.org/LDA. /etc/dovecot.conf # OS: Linux 2.6.18-028stab064.7 i686 CentOS release 5.5 (Final) reiserfs base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s managesieve ssl: no version_ignore: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login mail_location: maildir:/home/vmail/%u/Maildir mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(pop3): bytes=%i/%o managesieve_logout_format(managesieve): bytes ( in=%i : out=%o ) lda: postmaster_address: postmaster(a)domain.nl mail_plugins: cmusieve mail_plugin_dir: /usr/lib/dovecot/lda deliver_log_format: msgid=%m: %$ -- FROM=%f SUBJECT=%s log_path: /var/log/dovecot-deliver.log info_log_path: /var/log/dovecot-deliver.log syslog_facility: mail sendmail_path: /usr/lib/sendmail rejection_subject: Rejected: %s rejection_reason: Your message to <%t> was automatically rejected:%n%r auth_socket_path: /usr/local/var/run/dovecot-auth-master auth default: mechanisms: plain login username_format: %Lu passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: static args: uid=500 gid=500 home=/home/vmail/%u socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: sieve: /var/sieve-scripts/%u.sieve sieve_dir: %h/sieve sieve_global_dir: /var/lib/dovecot/sieve/global/ /etc/postfix/main.cf virtual_mailbox_domains = /etc/postfix/domains ## Plain text file with the domains virtual_mailbox_base = /home/vmail virtual_mailbox_maps = ldap:/etc/postfix/ldap-users.cf virtual_alias_maps = ldap:/etc/postfix/ldap-groups.cf virtual_uid_maps = static:500 virtual_gid_maps = static:500 dovecot_destination_recipient_limit = 1 #virtual_transport = dovecot ## Commented out to deliver by Postfix /etc/postfix/ldap-users.cf server_host = localhost search_base = dc=domain,dc=com version = 3 query_filter = (&(objectclass=mailUser)(mail=%s)) result_attribute = uid result_format = %s/Maildir/ /etc/postfix/ldap-groups.cf server_host = localhost search_base = dc=domain,dc=com version = 3 query_filter = (&(objectclass=mailGroup)(mail=%s)) leaf_result_attribute = mail special_result_attribute = member /etc/postfix/master.cf dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -d <username> I hope someone can help me, because many people on the internet say that it is easy. If anyone needs more information or anyone can help me, please contact me. Best, Frank --- LS: I know that I'm using Hotmail, but I want to post this anonymously.

4 6

[Dovecot] How to install sieve
by Carsten Laun-De Lellis 19 Jul '10

19 Jul '10

Hi all I do have a problem. I have an installation on opensuse 11.2 with postfix, amavis, spamassassin and dovecot 1.2.9 with a mysql authtentication backend. Everything works fine. I want now to install sieve, but i failed all the time. I downloaded dovecot-1.2-sieve-0.1.17 and followed the installation how-to. First when i tried to ./configure the installation i was always asked for dovecot-config. I managed this problem with a symlink. But when i try to run make i always got the following error message. I would appreciate any help. Kind regards, Carsten Laun-De Lellis ../../sieve-result.h:143: error: expected declaration specifiers or â...â before âboolâ In file included from cmd-vacation.c:27: ../../sieve-message.h:18: warning: empty declaration ../../sieve-message.h:27: error: expected declaration specifiers before âpool_tâ In file included from cmd-vacation.c:29: ext-vacation-common.h:13: error: storage class specified for parameter âvacation_commandâ ext-vacation-common.h:19: error: storage class specified for parameter âvacation_operationâ ext-vacation-common.h:23: error: storage class specified for parameter âvacation_extensionâ cmd-vacation.c:37: error: storage class specified for parameter âvacation_days_tagâ cmd-vacation.c:38: error: storage class specified for parameter âvacation_subject_tagâ cmd-vacation.c:39: error: storage class specified for parameter âvacation_from_tagâ cmd-vacation.c:40: error: storage class specified for parameter âvacation_addresses_tagâ cmd-vacation.c:41: error: storage class specified for parameter âvacation_mime_tagâ cmd-vacation.c:42: error: storage class specified for parameter âvacation_handle_tagâ cmd-vacation.c:53: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_registeredâ cmd-vacation.c:56: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_pre_validateâ cmd-vacation.c:58: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validateâ cmd-vacation.c:60: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_generateâ cmd-vacation.c:63: error: parameter âvacation_commandâ is initialized cmd-vacation.c:63: error: redefinition of parameter âvacation_commandâ ext-vacation-common.h:13: note: previous definition of âvacation_commandâ was here cmd-vacation.c:66: error: âFALSEâ undeclared (first use in this function) cmd-vacation.c:66: error: (Each undeclared identifier is reported only once cmd-vacation.c:66: error: for each function it appears in.) cmd-vacation.c:66: warning: excess elements in struct initializer cmd-vacation.c:66: warning: (near initialization for âvacation_commandâ) cmd-vacation.c:66: warning: excess elements in struct initializer cmd-vacation.c:66: warning: (near initialization for âvacation_commandâ) cmd-vacation.c:67: error: âcmd_vacation_registeredâ undeclared (first use in this function) cmd-vacation.c:67: warning: excess elements in struct initializer cmd-vacation.c:67: warning: (near initialization for âvacation_commandâ) cmd-vacation.c:68: error: âcmd_vacation_pre_validateâ undeclared (first use in this function) cmd-vacation.c:68: warning: excess elements in struct initializer cmd-vacation.c:68: warning: (near initialization for âvacation_commandâ) cmd-vacation.c:69: error: âcmd_vacation_validateâ undeclared (first use in this function) cmd-vacation.c:69: warning: excess elements in struct initializer cmd-vacation.c:69: warning: (near initialization for âvacation_commandâ) cmd-vacation.c:70: error: âcmd_vacation_generateâ undeclared (first use in this function) cmd-vacation.c:70: warning: excess elements in struct initializer cmd-vacation.c:70: warning: (near initialization for âvacation_commandâ) cmd-vacation.c:72: warning: excess elements in struct initializer cmd-vacation.c:72: warning: (near initialization for âvacation_commandâ) cmd-vacation.c:80: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validate_number_tagâ cmd-vacation.c:83: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validate_string_tagâ cmd-vacation.c:86: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validate_stringlist_tagâ cmd-vacation.c:89: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validate_mime_tagâ cmd-vacation.c:95: error: storage class specified for parameter âvacation_days_tagâ cmd-vacation.c:95: error: parameter âvacation_days_tagâ is initialized cmd-vacation.c:95: error: redefinition of parameter âvacation_days_tagâ cmd-vacation.c:37: note: previous definition of âvacation_days_tagâ was here cmd-vacation.c:97: warning: excess elements in struct initializer cmd-vacation.c:97: warning: (near initialization for âvacation_days_tagâ) cmd-vacation.c:98: error: âcmd_vacation_validate_number_tagâ undeclared (first use in this function) cmd-vacation.c:98: warning: excess elements in struct initializer cmd-vacation.c:98: warning: (near initialization for âvacation_days_tagâ) cmd-vacation.c:99: warning: excess elements in struct initializer cmd-vacation.c:99: warning: (near initialization for âvacation_days_tagâ) cmd-vacation.c:99: warning: excess elements in struct initializer cmd-vacation.c:99: warning: (near initialization for âvacation_days_tagâ) cmd-vacation.c:99: warning: excess elements in struct initializer cmd-vacation.c:99: warning: (near initialization for âvacation_days_tagâ) cmd-vacation.c:102: error: storage class specified for parameter âvacation_subject_tagâ cmd-vacation.c:102: error: parameter âvacation_subject_tagâ is initialized cmd-vacation.c:102: error: redefinition of parameter âvacation_subject_tagâ cmd-vacation.c:38: note: previous definition of âvacation_subject_tagâ was here cmd-vacation.c:104: warning: excess elements in struct initializer cmd-vacation.c:104: warning: (near initialization for âvacation_subject_tagâ) cmd-vacation.c:105: error: âcmd_vacation_validate_string_tagâ undeclared (first use in this function) cmd-vacation.c:105: warning: excess elements in struct initializer cmd-vacation.c:105: warning: (near initialization for âvacation_subject_tagâ) cmd-vacation.c:106: warning: excess elements in struct initializer cmd-vacation.c:106: warning: (near initialization for âvacation_subject_tagâ) cmd-vacation.c:106: warning: excess elements in struct initializer cmd-vacation.c:106: warning: (near initialization for âvacation_subject_tagâ) cmd-vacation.c:107: warning: excess elements in struct initializer cmd-vacation.c:107: warning: (near initialization for âvacation_subject_tagâ) cmd-vacation.c:109: error: storage class specified for parameter âvacation_from_tagâ cmd-vacation.c:109: error: parameter âvacation_from_tagâ is initialized cmd-vacation.c:109: error: redefinition of parameter âvacation_from_tagâ cmd-vacation.c:39: note: previous definition of âvacation_from_tagâ was here cmd-vacation.c:111: warning: excess elements in struct initializer cmd-vacation.c:111: warning: (near initialization for âvacation_from_tagâ) cmd-vacation.c:112: warning: excess elements in struct initializer cmd-vacation.c:112: warning: (near initialization for âvacation_from_tagâ) cmd-vacation.c:113: warning: excess elements in struct initializer cmd-vacation.c:113: warning: (near initialization for âvacation_from_tagâ) cmd-vacation.c:113: warning: excess elements in struct initializer cmd-vacation.c:113: warning: (near initialization for âvacation_from_tagâ) cmd-vacation.c:114: warning: excess elements in struct initializer cmd-vacation.c:114: warning: (near initialization for âvacation_from_tagâ) cmd-vacation.c:116: error: storage class specified for parameter âvacation_addresses_tagâ cmd-vacation.c:116: error: parameter âvacation_addresses_tagâ is initialized cmd-vacation.c:116: error: redefinition of parameter âvacation_addresses_tagâ cmd-vacation.c:40: note: previous definition of âvacation_addresses_tagâ was here cmd-vacation.c:118: warning: excess elements in struct initializer cmd-vacation.c:118: warning: (near initialization for âvacation_addresses_tagâ) cmd-vacation.c:119: error: âcmd_vacation_validate_stringlist_tagâ undeclared (first use in this function) cmd-vacation.c:119: warning: excess elements in struct initializer cmd-vacation.c:119: warning: (near initialization for âvacation_addresses_tagâ) cmd-vacation.c:120: warning: excess elements in struct initializer cmd-vacation.c:120: warning: (near initialization for âvacation_addresses_tagâ) cmd-vacation.c:120: warning: excess elements in struct initializer cmd-vacation.c:120: warning: (near initialization for âvacation_addresses_tagâ) cmd-vacation.c:121: warning: excess elements in struct initializer cmd-vacation.c:121: warning: (near initialization for âvacation_addresses_tagâ) cmd-vacation.c:123: error: storage class specified for parameter âvacation_mime_tagâ cmd-vacation.c:123: error: parameter âvacation_mime_tagâ is initialized cmd-vacation.c:123: error: redefinition of parameter âvacation_mime_tagâ cmd-vacation.c:41: note: previous definition of âvacation_mime_tagâ was here cmd-vacation.c:125: warning: excess elements in struct initializer cmd-vacation.c:125: warning: (near initialization for âvacation_mime_tagâ) cmd-vacation.c:126: error: âcmd_vacation_validate_mime_tagâ undeclared (first use in this function) cmd-vacation.c:126: warning: excess elements in struct initializer cmd-vacation.c:126: warning: (near initialization for âvacation_mime_tagâ) cmd-vacation.c:127: warning: excess elements in struct initializer cmd-vacation.c:127: warning: (near initialization for âvacation_mime_tagâ) cmd-vacation.c:127: warning: excess elements in struct initializer cmd-vacation.c:127: warning: (near initialization for âvacation_mime_tagâ) cmd-vacation.c:128: warning: excess elements in struct initializer cmd-vacation.c:128: warning: (near initialization for âvacation_mime_tagâ) cmd-vacation.c:130: error: storage class specified for parameter âvacation_handle_tagâ cmd-vacation.c:130: error: parameter âvacation_handle_tagâ is initialized cmd-vacation.c:130: error: redefinition of parameter âvacation_handle_tagâ cmd-vacation.c:42: note: previous definition of âvacation_handle_tagâ was here cmd-vacation.c:132: warning: excess elements in struct initializer cmd-vacation.c:132: warning: (near initialization for âvacation_handle_tagâ) cmd-vacation.c:133: warning: excess elements in struct initializer cmd-vacation.c:133: warning: (near initialization for âvacation_handle_tagâ) cmd-vacation.c:134: warning: excess elements in struct initializer cmd-vacation.c:134: warning: (near initialization for âvacation_handle_tagâ) cmd-vacation.c:134: warning: excess elements in struct initializer cmd-vacation.c:134: warning: (near initialization for âvacation_handle_tagâ) cmd-vacation.c:135: warning: excess elements in struct initializer cmd-vacation.c:135: warning: (near initialization for âvacation_handle_tagâ) cmd-vacation.c:139: warning: empty declaration cmd-vacation.c:152: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âext_vacation_operation_dumpâ cmd-vacation.c:155: error: expected declaration specifiers or â...â before âsieve_size_tâ cmd-vacation.c:155: error: storage class specified for parameter âext_vacation_operation_executeâ cmd-vacation.c:157: error: parameter âvacation_operationâ is initialized cmd-vacation.c:157: error: redefinition of parameter âvacation_operationâ ext-vacation-common.h:19: note: previous definition of âvacation_operationâ was here cmd-vacation.c:161: error: âext_vacation_operation_dumpâ undeclared (first use in this function) cmd-vacation.c:161: warning: excess elements in struct initializer cmd-vacation.c:161: warning: (near initialization for âvacation_operationâ) cmd-vacation.c:163: warning: excess elements in struct initializer cmd-vacation.c:163: warning: (near initialization for âvacation_operationâ) cmd-vacation.c:174: error: storage class specified for parameter âact_vacation_check_duplicateâ cmd-vacation.c:181: error: expected declaration specifiers or â...â before âboolâ cmd-vacation.c:181: error: storage class specified for parameter âact_vacation_printâ cmd-vacation.c:182: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âact_vacation_commitâ cmd-vacation.c:188: error: parameter âact_vacationâ is initialized cmd-vacation.c:191: warning: excess elements in struct initializer cmd-vacation.c:191: warning: (near initialization for âact_vacationâ) cmd-vacation.c:192: warning: excess elements in struct initializer cmd-vacation.c:192: warning: (near initialization for âact_vacationâ) cmd-vacation.c:193: warning: excess elements in struct initializer cmd-vacation.c:193: warning: (near initialization for âact_vacationâ) cmd-vacation.c:194: warning: excess elements in struct initializer cmd-vacation.c:194: warning: (near initialization for âact_vacationâ) cmd-vacation.c:195: warning: excess elements in struct initializer cmd-vacation.c:195: warning: (near initialization for âact_vacationâ) cmd-vacation.c:195: warning: excess elements in struct initializer cmd-vacation.c:195: warning: (near initialization for âact_vacationâ) cmd-vacation.c:196: error: âact_vacation_commitâ undeclared (first use in this function) cmd-vacation.c:196: warning: excess elements in struct initializer cmd-vacation.c:196: warning: (near initialization for âact_vacationâ) cmd-vacation.c:198: warning: excess elements in struct initializer cmd-vacation.c:198: warning: (near initialization for âact_vacationâ) cmd-vacation.c:205: error: expected specifier-qualifier-list before âsieve_number_tâ cmd-vacation.c:202: warning: empty declaration cmd-vacation.c:219: error: expected specifier-qualifier-list before âstring_tâ cmd-vacation.c:218: warning: empty declaration cmd-vacation.c:231: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validate_number_tagâ cmd-vacation.c:259: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validate_string_tagâ cmd-vacation.c:321: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validate_stringlist_tagâ cmd-vacation.c:344: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validate_mime_tagâ cmd-vacation.c:363: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_registeredâ cmd-vacation.c:387: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_pre_validateâ cmd-vacation.c:401: error: storage class specified for parameter â_handle_empty_subjectâ cmd-vacation.c:401: error: parameter â_handle_empty_subjectâ is initialized cmd-vacation.c:402: error: storage class specified for parameter â_handle_empty_fromâ cmd-vacation.c:402: error: parameter â_handle_empty_fromâ is initialized cmd-vacation.c:403: error: storage class specified for parameter â_handle_mime_enabledâ cmd-vacation.c:403: error: parameter â_handle_mime_enabledâ is initialized cmd-vacation.c:404: error: storage class specified for parameter â_handle_mime_disabledâ cmd-vacation.c:404: error: parameter â_handle_mime_disabledâ is initialized cmd-vacation.c:406: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_validateâ cmd-vacation.c:459: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âcmd_vacation_generateâ cmd-vacation.c:484: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âext_vacation_operation_dumpâ cmd-vacation.c:544: error: expected declaration specifiers or â...â before âsieve_size_tâ cmd-vacation.c:545: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before â{â token cmd-vacation.c:715: error: expected â;â, â,â or â)â before âATTR_UNUSEDâ cmd-vacation.c:734: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before â{â token cmd-vacation.c:754: error: expected â;â, â,â or â)â before âATTR_UNUSEDâ cmd-vacation.c:775: error: storage class specified for parameter â_list_headersâ cmd-vacation.c:775: error: parameter â_list_headersâ is initialized cmd-vacation.c:776: warning: initialization from incompatible pointer type cmd-vacation.c:777: warning: excess elements in scalar initializer cmd-vacation.c:777: warning: (near initialization for â_list_headersâ) cmd-vacation.c:778: warning: excess elements in scalar initializer cmd-vacation.c:778: warning: (near initialization for â_list_headersâ) cmd-vacation.c:779: warning: excess elements in scalar initializer cmd-vacation.c:779: warning: (near initialization for â_list_headersâ) cmd-vacation.c:780: warning: excess elements in scalar initializer cmd-vacation.c:780: warning: (near initialization for â_list_headersâ) cmd-vacation.c:781: warning: excess elements in scalar initializer cmd-vacation.c:781: warning: (near initialization for â_list_headersâ) cmd-vacation.c:782: warning: excess elements in scalar initializer cmd-vacation.c:782: warning: (near initialization for â_list_headersâ) cmd-vacation.c:784: warning: excess elements in scalar initializer cmd-vacation.c:784: warning: (near initialization for â_list_headersâ) cmd-vacation.c:789: error: storage class specified for parameter â_my_address_headersâ cmd-vacation.c:789: error: parameter â_my_address_headersâ is initialized cmd-vacation.c:790: warning: initialization from incompatible pointer type cmd-vacation.c:791: warning: excess elements in scalar initializer cmd-vacation.c:791: warning: (near initialization for â_my_address_headersâ) cmd-vacation.c:792: warning: excess elements in scalar initializer cmd-vacation.c:792: warning: (near initialization for â_my_address_headersâ) cmd-vacation.c:793: warning: excess elements in scalar initializer cmd-vacation.c:793: warning: (near initialization for â_my_address_headersâ) cmd-vacation.c:794: warning: excess elements in scalar initializer cmd-vacation.c:794: warning: (near initialization for â_my_address_headersâ) cmd-vacation.c:795: warning: excess elements in scalar initializer cmd-vacation.c:795: warning: (near initialization for â_my_address_headersâ) cmd-vacation.c:797: warning: excess elements in scalar initializer cmd-vacation.c:797: warning: (near initialization for â_my_address_headersâ) cmd-vacation.c:799: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before â_is_system_addressâ cmd-vacation.c:819: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before â_contains_my_addressâ cmd-vacation.c:857: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before â_contains_8bitâ cmd-vacation.c:868: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âact_vacation_sendâ cmd-vacation.c:975: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before â{â token cmd-vacation.c:987: error: expected â=â, â,â, â;â, âasmâ or â__attribute__â before âact_vacation_commitâ ../../rfc2822.h:33: error: old-style parameter declarations in prototyped function definition cmd-vacation.c:1144: error: expected â{â at end of input make[5]: *** [cmd-vacation.lo] Error 1 make[5]: Leaving directory `/download/dovecot-1.2-sieve-0.1.17/src/lib-sieve/plugins/vacation' make[4]: *** [all-recursive] Error 1 make[4]: Leaving directory `/download/dovecot-1.2-sieve-0.1.17/src/lib-sieve/plugins' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/download/dovecot-1.2-sieve-0.1.17/src/lib-sieve' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/download/dovecot-1.2-sieve-0.1.17/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/download/dovecot-1.2-sieve-0.1.17' make: *** [all] Error 2 Mit freundlichem Gruß Carsten Laun-De Lellis Dipl.-Ing. Elektrotechnik Certified Information Systems Auditor (CISA) Hauptstrasse 13 D-67705 Trippstadt Phone: +49 (6306) 992140 Mobile: +49 (151) 27530865 email: carsten.laun-delellis(a)delellis.net

1 0

[Dovecot] Deleting Index Files and Expire Tool
by Tom Goerger 19 Jul '10

19 Jul '10

Hi, In order to periodically deal with corrupted index files in Dovecot, we routinely will remove a users .imap folder in order to have the indexes rebuild. This hasn't ever caused a problem previously. However, removing the user's index files seems to break the ability of the expire plugin to update the expire stamp correctly, or expunge mail from the user folder. This seems logical, with the reliance of expire on the index.cache files. In testing, actually emptying the trash (since we're only concerned about Trash folders) resets the mailbox to a degree that the expire tool functions properly again. My question is, is there a better way to handle corrupted cache files? Is there a more graceful way to rebuild these using Dovecot tools? Or is there a more specific index file that can be removed, rather than removing the entire hierarchy? We're using Dovecot 1.1.6, on Solaris 10. -- Tom Goerger University of Minnesota - Internet Services

2 3

Re: [Dovecot] SSL / TLS Problem
by Leander S. 19 Jul '10

19 Jul '10

Thanks for your reply. What do you mean by "pipe" See, I can even connect via the console from the outside: |Notebook [~]$ openssl s_client -CApath ~/.cert/XYZ.com/ -connect XYZ.com:993 CONNECTED(00000003) depth=0 /C=DE/ST=BW/L=City/O=HomeServer GmbH/OU=WebHosting/CN=XYZ.com/emailAddress=admin@XYZ.com verify error:num=18:self signed certificate verify return:1 depth=0 /C=DE/ST=BW/L=City/O=HomeServer GmbH/OU=WebHosting/CN=XYZ.com/emailAddress=admin@XYZ.com verify return:1 --- Certificate chain 0 s:/C=DE/ST=BW/L=City/O=HomeServer GmbH/OU=WebHosting/CN=XYZ.com/emailAddress=admin@XYZ.com i:/C=DE/ST=BW/L=City/O=HomeServer GmbH/OU=WebHosting/CN=XYZ.com/emailAddress=admin@XYZ.com --- Server certificate -----BEGIN CERTIFICATE----- MIIC6TCCAlKgAwIBAgIJAN4Jfaj9QgEhMA0GCSqGSIb3DQEBBQUAMIGqMQswCQYD VQQGEwJERTEbMBkGA1UECBMSQmFkZW4tV3VlcnR0ZW1iZXJnMREwDwYDVQQHEwhO ZXVicm9ubjEWMBQGA1UEChMNTmV0T2NlYW4gR21iSDETMBEGA1UECxMKV2ViSG9z dGluZzEYMBYGA1UEAxMPc2VydmVyLm5ldG9jZWFuMSQwIgYJKoZIhvcNAQkBFhVh ZG1pbkBzZXJ2ZXIubmV0b2NlYW4wHhcNMTAwNzExMTgwMzQ4WhcNMzAwNzA2MTgw MzQ4WjCBqjELMAkGA1UEBhMCREUxGzAZBgNVBAgTEkJhZGVuLVd1ZXJ0dGVtYmVy ZzERMA8GA1UEBxMITmV1YnJvbm4xFjAUBgNVBAoTDU5ldE9jZWFuIEdtYkgxEzAR BgNVBAsTCldlYkhvc3RpbmcxGDAWBgNVBAMTD3NlcnZlci5uZXRvY2VhbjEkMCIG CSqGSIb3DQEJARYVYWRtaW5Ac2VydmVyLm5ldG9jZWFuMIGfMA0GCSqGSIb3DQEB AQUAA4GNADCBiQKBgQDFiBWAJ893Ocm4dooDHHkNRZcvC4N5qjfx1wywoS2DlnV4 GwBQPYcyewx5ptcjqq863r3rvHhbNeJbcnh8jNATTxto8r2NkadwccXw4LtqpfAS A2dhuYt8zKhiI2tlfZNCzSzDmqid4NuxKiNQGNB6OU6/x2vp0ZFTwstIr7TMAwID AQABoxUwEzARBglghkgBhvhCAQEEBAMCBkAwDQYJKoZIhvcNAQEFBQADgYEAtlPa GQ4Weyi9vlIDLL4PgGsNk4sR4Ca2gbYLTd5HaSkww+BKIfz1OkFEmsNozNSo19PJ WaOp7exCN23j5Z/+qfZSGgUAelJHxRJ0Mc8YmtTuLKaNHxWYBJit3T3n1lbuFENe vdh8oCo6GKjjm7RkbkEvTvdzrOdztXZt3Ij4gLE= -----END CERTIFICATE----- subject=/C=DE/ST=BW/L=City/O=HomeServer GmbH/OU=WebHosting/CN=XYZ.com/emailAddress=admin@XYZ.com issuer=/C=DE/ST=BW/L=City/O=HomeServer GmbH/OU=WebHosting/CN=XYZ.com/emailAddress=admin@XYZ.com --- No client certificate CA names sent --- SSL handshake has read 1313 bytes and written 325 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Secure Renegotiation IS NOT supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 54DC3526DB721308D460CBAF21D562958D34ED146332F0B4ACBE9E1311633ED1 Session-ID-ctx: Master-Key: 1BCB1FA49855FC38ACB52C2CD8D54594C006116220D66FA0E74F68663AFE3FC09086B9BFB1FE0E515681A2E0DC7C1AFC Key-Arg : None Start Time: 1278952607 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=CRAM-MD5] NetOcean MailSystem ^C Notebook [~]$| Am 12.07.10 19:11, schrieb Daniel Petre: > dude, whats the pipe at the end of the mail.key location? > >> It's always the same when it fails ... >> >> >> And this is how my dovecot.conf looks like: >> >> [...] >> >> |## >> ## SSL settings >> ## >> ssl = yes >> ssl_cert_file = /etc/ssl/mail/mail.cert >> ssl_key_file = /etc/ssl/mail/mail.key| >> >> [...] >> >> >> Thank you

4 6

[Dovecot] Plugins/Virtual for save searches & last 30 days incomming Email
by No body ist Perfect 19 Jul '10

19 Jul '10

Hello! How can i configure the virtal-dovecot (virtal folder) file for search the complete Mailbox for email not older as 30 Days ? Thanks a lot

2 1

[Dovecot] Proxy IMAP/POP/ManageSieve/SMTP in a large cluster enviroment
by Aliet Santiesteban Sifontes 19 Jul '10

19 Jul '10

Hi to all in the list, we are trying to do some tests lab for a large scale mail system having this requirements: - Scale to maybe 1million users(Only for testing). - Server side filters. - User quotas. - High concurrency. - High performance and High Availability. We plan to test this using RHEL5 and maybe RHEL6. As a storage we are going to use an HP EVA 8400 FC(8 GB/s) We defined this functional roles. 1- Outgoing SMTP gateway servers. - Load balanced with Piranha LVS using Direct Routing. - ( n servers)RHEL5/6 using Postfix Latest version Amavisd-new Clamav Spamassasin maybe some other filters. 2- Incomming SMTP gateway servers. - Load balanced with Piranha LVS using Direct Routing. - RHEL5/6 using Postfix Latest version Amavisd-new Clamav Spamassasin( n servers) maybe some other filters. 3- Webmail Cluster farm. - Load balanced with Piranha LVS using Direct Routing. - ( n servers)RHEL5/6 using RHCS Active/Active. Apache2 PHP5 Horde. 4- Openldap load balanced openldap cluster. - Load balanced with Piranha LVS using Direct Routing. - ( n servers)RHEL5/6 using Openldap. 5- IMAP/POP/ManageSieve/SMTP Proxy or Director. - Load balanced with Piranha LVS using Direct Routing. - ( n servers)RHEL5/6 using Dovecot - Postfix(Director or Proxy). 6- Mail backend. - ( n servers)RHEL5/6 using Dovecot. Now for functional role 6 "Mail Backend" we have some dilemmas. - Recommended scalable filesystem to use for such scenario(Clustered or not). -GFS2?? We have very bad experiences with GFS1 and maildir, GFS2 doesn't seems to improve this also. Using some techniques for session afinity with a backend server seems to help with the locking problems of GFS and the cache. Using GFS many IMAP SMTP servers can in parallel write or read to user mailboxes, if GFS can perform well we prefer this, will have to proxy o use director for the cache problem. - Ext4, Ext3 well tested with many setups but only one backend server can access one ext4 lun, so we have to proxy a user always to a ip backend address or VIP in a case of failure cluster software has to move the server to another node, the cluster service is formed by a IP Address and one or many Luns wich moves from node to node in a case of failure. - Recommended scalable method for partition divition. - Directory Hashing(How it actually works the theory behind this), we see the wiki but we need to understand the theory to balance the directory structure. - Using some criteria ex Lun1(a-h users), Lun2(i-m users).... - Proxy or Director is a must for a Clustered Filsystem or for the solution of a user belonging to one server. - In case we use a Proxy with dovecot we know we can use it with IMAP/POP but are not sure for ManageSieve and more important for SMTP. The question is, how can we proxy for the same user IMAP/POP/ManageSieve and SMTP delivery to mailbox at the same time, can the incoming mail gateways send the email to the proxy servers and dovecot proxy the request for smtp or lmtp appply the same proxy criteria that uses for the protocols IMAP and POP and send the email to the correct backend server and this server do the final delivery?? I mean proxy all the protocols for a user IMAP/POP/SMTP-LMTP?? Any example... Right now we have doubts on this stuff, we are really going to appreciate any help or advice on this... best regards

4 4

[Dovecot] Haha wow, thats freakin cool... mdbox
by Brandon Lamb 19 Jul '10

19 Jul '10

It didnt really click until I had a "ls -ald *" on watch while I moved messages around folders using mdbox... I moved about 200 first to an Archive folder, and scratched my head wondering why i didnt see any new m.* files being created after the move. So then I moved some 5k other messages from other folders to my archive folder... Then it dawned on me, how damn cool, the data never changes, dovecot just updates its index of what folder the message is in?! That is awesome! Also, I ended up answering my own question on the 2m mdbox_rotate_size, if a 10 meg email comes through it will write a 10 meg file, so thats cool too.

4 4

[Dovecot] dsync segmentation fault
by Brandon Lamb 19 Jul '10

19 Jul '10

dsync -u brandon(a)olypen.com mirror mdbox~/mdbox Segmentation fault Took me 3 tries before I noticed the missing colon after mdbox

2 3

[Dovecot] mdbox, mdbox_rotate_size 2m default
by Brandon Lamb 19 Jul '10

19 Jul '10

Anyone else test using different values? Was 2M chosen as a default based on anything specific? Is there any kind of known range where performance starts to go downhill if its greater than x or less than y? Im curious if there would be any obvious reason why I shouldnt set it to 5-10 megs

2 1

[Dovecot] users can not login
by Daminto Lie 19 Jul '10

19 Jul '10

Hi, I was wondering if I could get some help here. Recently, I decided I want to move from Windows XP Pro OS to a Linux OS such as Ubuntu. I am new to Linux OS but willing to learn. I have installed Ubuntu Server 10.04, Apache2, MySQL5, PHPMyAdmin, Postfix, DoveCot and Squirrelmail on my server. I have checked them all and they are all up and running at the moment. Now, what I am trying to do here is to add a couple of users and see whether they can login to squirrelmail. The result is none of those two users are able to login. I went to check the mail.log and the error message is as follows Ubuntu-MailServer dovecot: imap-login: Aborted login (auth failed, 1 attempts): user=<david.keith>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured My silly question is I do not quite understand what the above error means. How do i enable users to login and test to see if they can send and receive emails. Users can login via squirrelmail. Any help would be greatly appreciated.

2 1

[Dovecot] pam needs root with 2.0rc2 on Solaris?
by Laurent Blume 19 Jul '10

19 Jul '10

Hello all, I have a question using PAM to authenticate on Solaris 10, with 2.0rc2. I need to set the user for auth-worker to root, else it will return "Unknown user". Is that expected? I'm using PAM, so why does it need access to /etc/shadow? TIA! Laurent service auth-worker { # Auth worker process is run as root by default, so that it can access # /etc/shadow. If this isn't necessary, the user should be changed to # $default_internal_user. user = root #user = dovecot } Jul 18 09:59:31 tiphaine dovecot: [ID 583609 mail.info] auth: pam(user,127.0.0.1): unknown user

2 1

[Dovecot] how configure dovecot for not case sensitive login
by Wilberth Perez 19 Jul '10

19 Jul '10

Any knows how can say to dovecot that Login = user and Login = User are the same? Thanks.

2 3