- dovecot - dovecot.org

[Dovecot] Authentication failure (password mismatch?)
by Wade Smart 30 Jan '10

30 Jan '10

I setup dovecot on my laptop to practice on. I was following some of the information on this page: https://help.ubuntu.com/community/PostfixVirtualMailBoxClamSmtpHowto#Testing Your Setup I created the in this format: user:{plain}pass:1000:1000::/home/user::userdb_mail=maildir:~/Maildir for userdb passwd-file. I used smart for the user and wade for the password (its just for testing) and then attempted to log into the system. Im getting these errors: auth-worker(default): pam(smart,127.0.1.1): lookup service=dovecot auth-worker(default): pam(smart,127.0.1.1): #1/1 style=1 msg=Password; auth-worker(default): pam(smart,127.0.1.1): pam_authenticate() failed: Authentication failure( password mismatch?) auth-worker(default): passwd-file /etc/dovecot/passwd.dovecot: Read 1 users auth-worker(default): passwd-file(smart,127.0.1.1): lookup: user=smart file=/etc/dovecot/passwd.dovecot Its reading the file but the password is incorrect. Im not understanding that part. Wade Smart -- Registered Linux User: #480675 Registered Linux Machine: #408606 Linux since June 2005

1 0

[Dovecot] How do I make dovecot not use sslv2 for pop?
by Patrick Horgan 30 Jan '10

30 Jan '10

From nmap: 995/tcp open ssl/pop3 Dovecot pop3d |_ sslv2: server still supports SSLv2 |_ pop3-capabilities: USER CAPA UIDL PIPELINING RESP-CODES TOP SASL(PLAIN LOGIN) pop3 allows SSLv2, imap doesn't. In my dovecot.conf I have: ssl_cipher_list = ALL:!LOW:!SSLv2 at the global level. Do I need to put it inside the protocol pop3{} section? Patrick

3 4

[Dovecot] Dovecot SSL issues
by Spyros Tsiolis 29 Jan '10

29 Jan '10

Hello all, successfully managed to make dovecot work with horde (http://www.horde.org) and another MTA (SMTP/POP3). I have this nagging issue with dovecot though (I suspect - it's dovecot and not the rest of the packages, please read on): There is this special page one goes, that check if everything is ok with all the relevant software running along Horde. It's a php file called "test.php". Now, this file shows almost everything that happens in the box. Here's a transcript of what shows when it comes to dovecot and SSL : --------------------------- * Trying protocol imap/ssl, Port 993: ERROR - The server returned the following error message: SECURITY PROBLEM: insecure server advertised AUTH=PLAINCertificate failure for localhost: self signed certificate: /C=GR/ST=Kerkyra/L=Kerkyra/O=The Company Name/OU=IMAP server/CN=webmail.thecompanyname.gr/emailAddress=postmaster(a)webmail.thecompanyname.gr --------------------------- From what I understand, it doesn't like the certificate. However, I've followed a howto document step-by-step and did what is documented. Does anyone have any pointers on how to make secure imap for dovecot ? E.G. on ThunderBird, the settings are the following : Tools -> Account Settings -> Server Settings : Server Name : (the server or its ip address) Username : (the username) Port : (I've manually entered "993", because by default goes to "143") Security Settings -> Connection Security : SSL/TLS (again manually entered) CHECK_ON : Use secure authentication Now, if I click on "Get Mail" button on top of the TB window, I get a pop-up window with the following message : ------ Server : Location : <Servers' IP Address>:993 Certificate Status : This site attempts to identify itself with invalid information. Wrong Site : Certificate belongs to a different site, which could indicate an identity theft. Unknown Identity : Certificate is not trusted, because it hasn't been verified by a recognized authority. ------ After that, the users accepts the above by pressing ok twice. However, there's a third pop-up window with a message shown below : ------ You cannot log in to <servers' ip address> because you have enabled secure authentication and this serer does not support it. To log in, turn off secure authentication for this account. ------ Any help would be appreciated.. Thank you all for your patience, S. Tsiolis

3 2

Re: [Dovecot] dovecot auth feature request
by Frank Cusack 29 Jan '10

29 Jan '10

On January 29, 2010 7:11:59 PM +0200 Timo Sirainen <tss(a)iki.fi> wrote: > On Fri, 2010-01-29 at 12:01 -0500, Frank Cusack wrote: >> when i try to run dovecot for SASL support only, with literally just >> this configuration: >> >> protocols = none >> ssl = no > > I suppose you didn't mean to include "ssl=no" above? yes, sorry. that is the working config. > I guess the reason I'm telling you this is because I don't really want > to add something to v1.2 that'll just go away in v2.0. pretty trivial to just include that line in the config so no worries. -frank

1 0

[Dovecot] mdbox, dsync
by Timo Sirainen 29 Jan '10

29 Jan '10

I finally migrated my mails from mbox format to mdbox format using dsync: 1. Stop dovecot, wait a few seconds for processes to die 2. dsync convert mdbox:~/mdbox 3. Change mail_location to mdbox:~/mdbox 4. Check that no new mails arrived during conversion (alternatively I could have just run dsync again, but I decided not to test my luck) 5. Start dovecot After fixing a pretty bad bug in dsync and a couple of other unrelated bugs, everything seemed to work correctly and transparently. UIDs and everything was preserved as expected. I think I even feel my mail clients being faster than with mbox :) ~% du --exclude=.imap -bsh mail-old-mbox 707M mail-old-mbox ~% du -bsh mdbox/* 27M mdbox/mailboxes 704M mdbox/storage The reason why I'm giving -b is because without it, mdbox was a lot larger than mbox (734 MB vs. 710 MB). I guess this is because zfs internally decided to waste some space for the files. ~/mdbox/storage% ls -lS -rw------- 1 tss tss 13602413 2010-01-29 18:05 m.68 -rw------- 1 tss tss 10487382 2010-01-29 18:06 m.209 -rw------- 1 tss tss 7749964 2010-01-29 18:06 m.270 -rw------- 1 tss tss 7493010 2010-01-29 18:05 m.69 .. -rw------- 1 tss tss 2097246 2010-01-29 18:06 m.175 -rw------- 1 tss tss 2097213 2010-01-29 18:06 m.151 -rw------- 1 tss tss 2097173 2010-01-29 18:06 m.197 -rw------- 1 tss tss 2097163 2010-01-29 18:05 m.89 -rw------- 1 tss tss 1307164 2010-01-29 18:33 m.296 Total of 296 files. The reason why there are a few large files is because their last mail is huge. I guess in future mdbox should try to avoid doing that if it knows the mail's size beforehand. Actually I thought it already tried to do that.. Anyway, let's hope it doesn't now corrupt all my mails.

3 3

[Dovecot] dovecot auth feature request
by Frank Cusack 29 Jan '10

29 Jan '10

when i try to run dovecot for SASL support only, with literally just this configuration: protocols = none ssl = no auth default { mechanisms = plain login passdb passwd-file { args = /etc/dovecot/passwd } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 } } } I get this: Error: ssl_cert_file: Can't use /etc/ssl/certs/dovecot.pem: No such file or directory Since, in this configuration, SSL doesn't have meaning, dovecot shouldn't be looking for any cert file. Easily fixed with "ssl = no" but that shouldn't be required. -frank

2 1

[Dovecot] mailbox format w/ separate headers/data
by Frank Cusack 29 Jan '10

29 Jan '10

In the future, it would be cool if there were a mailbox format (dbox2?) where mail headers and each mime part were stored in separate files. This would enable the zfs dedup feature to be used to maximum benefit. In the zfs filesystem, there is a dedup feature which stores only 1 copy of duplicate blocks. In a normal mail file, the headers will be different for each recipient and the chances of the content of the message being able to be dedup'd are close to zero, because the differences in header length changes the block boundaries for the rest of the message. But if each mime part is stored in a separate file, you get massive compression "for free". -frank

5 16

[Dovecot] Master user and proxying
by BaQs 29 Jan '10

29 Jan '10

Hello list, Still need your help configuring proxy infrastructure. Today, I really struggle configuring master passwords forwarding. What I want: master user can connect to any other account, on proxy. Could please somebody help me, I read both articles about this on wiki, but still can't connect :( What I did: on proxy: auth_master_user_separator=* passdb sql { args = /usr/local/dovecot/etc/dovecot-master.conf master = yes pass = yes } -- dovecot-master.conf: (...) default_pass_scheme = CRYPT password_query = SELECT password FROM master_users WHERE username= '%u' AND status = 'ok' -- on destination server: auth_master_user_separator=* passdb sql { args = /usr/local/etc/dovecot-master.conf master = yes pass = yes } default_pass_scheme = CRYPT password_query = SELECT password FROM master_users WHERE username= '%u' AND status = 'ok' I also tried on proxy: password_query = SELECT NULL AS password, host, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS nopassword, 'Y' AS proxy,'%u' as user ,'%u*pierre' as destuser, '123' as pass FROM proxy WHERE domain = '%d' instead of password_query = SELECT NULL AS password, host, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS nopassword, 'Y' AS proxy,'%u' as user FROM proxy WHERE domain = '%d' it did not work :( -------- LOGS: -------- on destination server: [ID 583609 mail.info] auth(default): cache(pierre,127.0.0.1,master): expired [ID 583609 mail.info] auth-worker(default): sql(pierre,127.0.0.1): query: SELECT password FROM master_users WHERE username= 'pierre' AND status = 'ok' [ID 583609 mail.info] auth(default): passdb(pierre,127.0.0.1,master): Master user logging in as account(a)test.fr*pierre [ID 583609 mail.info] auth(default): cache(account(a)test.fr*pierre,127.0.0.1): miss [ID 583609 mail.info] auth-worker(default): sql(account(a)test.fr*pierre,127.0.0.1): query: SELECT CONCAT(pw_name, '@', pw_domain) AS user, pw_passwd AS password FROM vpopmail WHERE pw_name = 'julien' AND pw_domain = 'demarey.fr*pierre' [ID 583609 mail.info] auth-worker(default): sql(account(a)test.fr*pierre,127.0.0.1): unknown user [ID 583609 mail.info] auth(default): new auth connection: pid=8162 [ID 583609 mail.info] auth(default): client out: FAIL 1 user=account(a)test.fr*pierre authz on proxy: auth(default): client in: AUTH 2 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=39978 resp= auth(default): cache(pierre,127.0.0.1,master): hit: user=pierre auth(default): passdb(pierre,127.0.0.1,master): Master user logging in as account(a)test.fr auth(default): cache(account(a)test.fr,127.0.0.1): miss auth-worker(default): sql(account(a)test.fr,127.0.0.1): query: SELECT NULL AS password, host, 'Y' AS nologin, 'Y' AS nodelay, 'Y' AS nopassword, 'Y' AS proxy,'account(a)test.fr' as user ,'account(a)test.fr*pierre' as destuser, '123' as pass FROM proxy WHERE domain = 'demarey.fr' auth(default): client out: OK 2 user=account(a)test.fr host=10.0.44.20 nologin proxy destuser=account(a)test.fr*pierre pass= master=pierre imap-login: proxy(account(a)test.fr): Login failed to 10.0.44.20:143/account@test.fr*pierre (master pierre): [AUTHORIZATIONFAILED] Authorization failed [ID 583609 mail.info] imap-login: Disconnected (auth failed, 1 attempts): user=, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured both use dovecot version 1.2.9

2 1

Re: [Dovecot] How do I make dovecot not use sslv2 for pop?
by Andreas Schulze 29 Jan '10

29 Jan '10

> From: Timo Sirainen <tss(a)iki.fi> > Subject: Re: [Dovecot] How do I make dovecot not use sslv2 for pop? > Message-ID: <1264724551.22202.139.camel@hurina> > > Anyway.. I guess I should do something about this. Not really sure what, > though. Timo, you can simply stop supporting SSLv2. Nobody really needs security known to be insecure. -- Andreas Schulze Internetdienste | P532 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

3 2

[Dovecot] Courier-to-Dovecot-migration: Outlook downloads all Mails again
by Werner 29 Jan '10

29 Jan '10

Hi everybody, I'm currently playing through the migration from Courier to dovecot. I've converted the User's Maildir with 'courier-dovecot-migrate.pl'. Outlook 2003 is configured to access the Mailbox via POP3, the option "Leave a copy of messages on the server" is activated. But: after the migration Outlook 2000 redownloads all mails again :-( Could it be, that Outlook 2000 "thinks" (after changing the POP3/SMTP-Server in the Outlook configuration pointing to my testsystem) this is a new system and starts to download the messages again? If so, Outlook 2000 won't download all messages again if we do the migration because POP3/SMTP-Server remains the same. Can anybody confirm this? We do not experience this issue with Thunderbird for example. Thank you, Werner

2 2

[Dovecot] virtual users with mysql
by Andre Hübner 28 Jan '10

28 Jan '10

Hello List, we use in our system cryptical Usernames for dovecot etc. and authenticate users against shadow/passwd User abcde is loging in and gets data from /var/spool/mail/abcde and /home/popuser/abcde Now we want to make it possible that users can log in also with emailadresses. I tried dovecot-mysql authentication which works fine but i do not find a way to use 2 different login-formats in my queries. login with abcde and also testname(a)example.com should return ok and lead to /var/spool/mail/abcde. Is this possible or i have to make a decision which format to use? Thanks, Andre

2 2

[Dovecot] assertion mail-transaction-log-view.c
by David Halik 28 Jan '10

28 Jan '10

I'm not sure how useful this is with optimization turned back on, but here it is anyway. This was just a one off that happened last night: Jan 27 20:49:05 gehenna17.rutgers.edu dovecot: IMAP(user): fscking index file /rci/nqu/rci/u2/user/dovecot/.INBOX/dovecot.index Jan 27 20:49:05 gehenna17.rutgers.edu dovecot: IMAP(user): Panic: file mail-transaction-log-view.c: line 108 (mail_transaction_log_view_set): assertion failed: (min_file_seq <= max_file_seq) Jan 27 20:49:05 gehenna17.rutgers.edu dovecot: IMAP(user): Raw backtrace: /usr/libexec/dovecot/imap [0x49ede0] -> /usr/libexec/dovecot/imap [0x49ee43] -> /usr/libexec/dovecot/imap [0x49e4a6] -> /usr/libexec/dovecot/imap(mail_transaction_log_view_set+0x4ac) [0x486e1c] -> /usr/libexec/dovecot/imap(mail_index_sync_have_any+0x8f) [0x47c2bf] -> /usr/libexec/dovecot/imap [0x43cb8a] -> /usr/libexec/dovecot/imap(maildir_storage_sync_init+0x14e) [0x43cf0e] -> /usr/libexec/dovecot/imap(imap_sync_init+0x67) [0x4283e7] -> /usr/libexec/dovecot/imap(cmd_sync_delayed+0x174) [0x428634] -> /usr/libexec/dovecot/imap(client_handle_input+0x19e) [0x420c5e] -> /usr/libexec/dovecot/imap(client_input+0x5f) [0x42164f] -> /usr/libexec/dovecot/imap(io_loop_handler_run+0xf8) [0x4a6c68] -> /usr/libexec/dovecot/imap(io_loop_run+0x1d) [0x4a5d7d] -> /usr/libexec/dovecot/imap(main+0x620) [0x428f30] -> /lib64/libc.so.6(__libc_start_main+0xf4) [0x3ba081d994] -> /usr/libexec/dovecot/imap [0x419ad9] #0 0x0000003ba0830265 in raise (sig=<value optimized out>) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 pid = <value optimized out> selftid = <value optimized out> #1 0x0000003ba0831d10 in abort () at abort.c:88 act = Could not find the frame base for "abort". sigs = Could not find the frame base for "abort". #2 0x000000000049eded in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x12be38a8 "/usr/libexec/dovecot/imap [0x49ede0] -> /usr/libexec/dovecot/imap [0x49ee43] -> /usr/libexec/dovecot/imap [0x49e4a6] -> /usr/libexec/dovecot/imap(mail_transaction_log_view_set+0x4ac) [0x486e1c] -> /us"... #3 0x000000000049ee43 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=<value optimized out>, args=<value optimized out>) at failures.c:443 No locals. #4 0x000000000049e4a6 in i_panic (format=0x6 <Address 0x6 out of bounds>) at failures.c:207 args = {{gp_offset = 40, fp_offset = 48, overflow_arg_area = 0x7fff2d949840, reg_save_area = 0x7fff2d949780}} #5 0x0000000000486e1c in mail_transaction_log_view_set (view=0x12c56ee0, min_file_seq=<value optimized out>, min_file_offset=9520, max_file_seq=95, max_file_offset=24636, reset_r=0x7fff2d9498cf) at mail-transaction-log-view.c:108 file = <value optimized out> files = <value optimized out> start_offset = <value optimized out> i = <value optimized out> seq = <value optimized out> ret = <value optimized out> __PRETTY_FUNCTION__ = "mail_transaction_log_view_set" #6 0x000000000047c2bf in mail_index_sync_have_any (index=<value optimized out>, flags=<value optimized out>) at mail-index-sync.c:506 view = (struct mail_index_view *) 0x12c56c40 #7 0x000000000043cb8a in maildir_sync_context (ctx=0x12be3728, forced=false, find_uid=0x0, lost_files_r=0x7fff2d949967) at maildir-sync.c:697 sync_flags = <value optimized out> flags = 314502464 new_changed = false cur_changed = false lock_failure = <value optimized out> fname = 0x49d85b "L\211�H\213\\$\bL\213d$\020H\203�\030�\017\037" ret = <value optimized out> __PRETTY_FUNCTION__ = "maildir_sync_context" #8 0x000000000043cf0e in maildir_storage_sync_init (box=0x12bf2a98, flags=0) at maildir-sync.c:924 _data_stack_cur_id = 3 mbox = <value optimized out> ctx = (struct maildir_sync_context *) 0x12be3728 lost_files = <value optimized out> ret = 0 __PRETTY_FUNCTION__ = "maildir_storage_sync_init" #9 0x00000000004283e7 in imap_sync_init (client=0x12beed40, box=0x12bf2a98, imap_flags=IMAP_SYNC_FLAG_SAFE, flags=0) at imap-sync.c:146 ctx = (struct imap_sync_context *) 0x12bf78b0 __PRETTY_FUNCTION__ = "imap_sync_init" #10 0x0000000000428634 in cmd_sync_delayed (client=<value optimized out>) at imap-sync.c:592 cmd = <value optimized out> first_expunge = <value optimized out> first_nonexpunge = (struct client_command_context *) 0x80 __PRETTY_FUNCTION__ = "cmd_sync_delayed" #11 0x0000000000420c5e in client_handle_input (client=0x12beed40) at client.c:729 remove_io = false handled_commands = true __PRETTY_FUNCTION__ = "client_handle_input" #12 0x000000000042164f in client_input (client=0x12beed40) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x12bf00e8 bytes = 15 __PRETTY_FUNCTION__ = "client_input" #13 0x00000000004a6c68 in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:208 ctx = <value optimized out> event = (const struct epoll_event *) 0x12bec350 list = (struct io_list *) 0x12bf01c0 io = (struct io_file *) 0x12bfb760 tv = {tv_sec = 1799, tv_usec = 999417} events_count = <value optimized out> t_id = 2 msecs = <value optimized out> ret = 1 i = 0 call = <value optimized out> #14 0x00000000004a5d7d in io_loop_run (ioloop=0x12bec0f0) at ioloop.c:335 No locals. #15 0x0000000000428f30 in main (argc=<value optimized out>, argv=<value optimized out>, envp=0x7fff2d949c18) at main.c:327 No locals. -- ================================ David Halik System Administrator OIT-CSS Rutgers University dhalik(a)jla.rutgers.edu ================================

1 0

[Dovecot] Question about Pigeonhole for Dovecot v2.0 revision 1223:67f7f59671e8
by Jonathan Siegle 28 Jan '10

28 Jan '10

I'm looking for documentation on the testsuite program. The most useful piece would be a sample scriptfile.

2 4

[Dovecot] failed to stat user's sieve script
by Nick Lunt 28 Jan '10

28 Jan '10

Hi # dovecot --version 1.2.10 ==> /var/log/dovecot.log <== Jan 28 13:26:15 deliver(root): Info: Loading modules from directory: /usr/lib/dovecot/lda Jan 28 13:26:15 deliver(root): Info: Module loaded: /usr/lib/dovecot/lda/lib90_sieve_plugin.so Jan 28 13:26:15 deliver(root): Error: chdir(/root) failed: Permission denied Jan 28 13:26:15 deliver(root): Info: maildir: data=/root/Maildir Jan 28 13:26:15 deliver(root): Info: maildir++: root=/root/Maildir, index=, control=, inbox=/root/Maildir Jan 28 13:26:15 deliver(root): Error: sieve: failed to stat user's sieve script: stat(/root/.dovecot.sieve) failed: Permission denied (euid=99(nobody) egid=99(nobody) missing +x perm: /root) (using global script path in stead) Jan 28 13:26:15 deliver(root): Info: sieve: user has no valid personal script Jan 28 13:26:15 deliver(root): Info: sieve: no scripts to execute: reverting to default delivery. Jan 28 13:26:15 deliver(root): Error: stat(/root/Maildir) failed: Permission denied Jan 28 13:26:15 deliver(root): Info: Namespace : Using permissions from /root/Maildir: mode=0700 gid=-1 Jan 28 13:26:15 deliver(root): Error: stat(/root/Maildir/tmp) failed: Permission denied (euid=99(nobody) egid=99(nobody) missing +x perm: /root) Jan 28 13:26:15 deliver(root): Info: msgid=<201001281326.o0SDQFMO018304(a)psl-dev.patech-solutions.com>: save failed to INBOX: Internal error occurred. Refer to server log for more information. [2010-01-28 13:26:15] I cannot send email to the root user on the box. I can send email to other users on the box. Root user does not have a .dovecot.sieve. Dovecot created ~user/Maildir fine, but will not create /root/Maildir. Permissions on ~user directory: drwx------ 6 nickl nickl 4096 Jan 28 13:07 /home/nickl/ Permissions on /root directory: drwxr-x--- 20 root root 4096 Jan 28 13:24 /root/ Running dovecot with postfix, mailbox_command = /usr/libexec/dovecot/deliver . This is all running fine for the user but not for root. I don't want dovecot-sieve to work on root's emails anyway, just the users. Dovecot settings: # dovecot -n # 1.2.10: /etc/dovecot.conf # OS: Linux 2.6.18-128.el5 x86_64 Red Hat Enterprise Linux Server release 5.3 (Tikanga) log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.log ssl: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_access_groups: mail mail_privileged_group: mail mail_location: maildir:~/Maildir mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 lda: postmaster_address: root@localhost mail_plugins: sieve auth default: debug: yes passdb: driver: pam userdb: driver: passwd plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/ log_path: /var/log/dovecot.log Any help appreciated, I only started using dovecot yesterday and it's a learning curve trying to get dovecot-sieve to work. Thanks Nick. __________ Information from ESET NOD32 Antivirus, version of virus signature database 4813 (20100128) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

3 4

[Dovecot] Cannot get dovecot-sieve to work
by Nick Lunt 28 Jan '10

28 Jan '10

Hi all # dovecot --version 1.2.10 # dovecot -n # 1.2.10: /etc/dovecot.conf # OS: Linux 2.6.18-128.el5 x86_64 Red Hat Enterprise Linux Server release 5.3 (Tikanga) log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.log ssl: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: mbox:~/mail:INBOX=/var/mail/%u mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 lda: mail_plugins: sieve auth default: debug: yes passdb: driver: pam userdb: driver: passwd plugin: sieve: ~/.dovecot.sieve sieve_dir: ~/ log_path: /var/log/dovecot.log Here is my ~/.dovecot.sieve $ cat .dovecot.sieve require "fileinto"; if not header :contains "subject" "GRE:99" { discard; stop; } else { keep; } I only want to accept emails with GRE:99 as the subject, I'm not interested in any other mails. However when I send myself an email via the mail command all emails go into my INBOX whatever the subject is. I don't really get any info in the logs either: Jan 27 17:34:20 dovecot: Info: Dovecot v1.2.10 starting up (core dumps disabled) Jan 27 17:34:21 auth(default): Info: new auth connection: pid=495 Jan 27 17:34:21 auth(default): Info: new auth connection: pid=496 Jan 27 17:34:21 auth(default): Info: new auth connection: pid=497 Jan 27 17:34:21 auth(default): Info: new auth connection: pid=498 Jan 27 17:34:21 auth(default): Info: new auth connection: pid=499 Jan 27 17:34:21 auth(default): Info: new auth connection: pid=500 Jan 27 17:34:32 auth(default): Info: client in: AUTH 1 PLAIN service=imap lip=192.168.10.208 rip=192.168.10.207 lport=143 rport=22688 resp=<hidden> Jan 27 17:34:32 auth-worker(default): Info: pam(nickl,192.168.10.207): lookup service=dovecot Jan 27 17:34:32 auth-worker(default): Info: pam(nickl,192.168.10.207): #1/1 style=1 msg=Password: Jan 27 17:34:32 auth(default): Info: client out: OK 1 user=nickl Jan 27 17:34:32 auth(default): Info: master in: REQUEST 1 500 1 Jan 27 17:34:32 auth(default): Info: passwd(nickl,192.168.10.207): lookup Jan 27 17:34:32 auth(default): Info: master out: USER 1 nickl system_groups_user=nickl uid=503 gid=503 home=/home/nickl Jan 27 17:34:32 imap-login: Info: Login: user=<nickl>, method=PLAIN, rip=192.168.10.207, lip=192.168.10.208 Jan 27 17:34:32 IMAP(nickl): Info: Effective uid=503, gid=503, home=/home/nickl Jan 27 17:34:32 IMAP(nickl): Info: mbox: data=~/mail:INBOX=/var/mail/nickl Jan 27 17:34:32 IMAP(nickl): Info: fs: root=/home/nickl/mail, index=, control=, inbox=/var/mail/nickl Jan 27 17:34:32 auth(default): Info: new auth connection: pid=513 Im sure my .dovecot.sieve is not getting processed but I cannot prove it. Any help would be appreciated. Many thanks Nick .

3 8

[Dovecot] Dovecot 2.0 authentication will not work with Exim [patch]
by Kirill Miazine 28 Jan '10

28 Jan '10

Just a notice to those of you who use Dovecot authentication with Exim. In Dovecot 2.0 authentication server will send a new keyword, COOKIE. This will cause Exim to abort it's authentication request. I submitted a bug and patch to Exim to fix this, the patch is here: http://km.krot.org/code/exim-dovecot-1.1.diff BR, Kirill

1 1

[Dovecot] virtual mailbox / INTHREAD use case, issues, questions
by David Abrahams 27 Jan '10

27 Jan '10

For over a year now, I've been trying to acquire the ability to review the thread history of a message in my INBOX while still deleting messages as soon as I believe I'm done with them. Suddenly I'm gratified to see that several approaches have been right under my nose all along! One is the INTHREAD imap extension, which I see is implemented by dovecot. Another (related) is dovecot's virtual folders. When I saw the GMail-style "conversation view" described at http://wiki.dovecot.org/Plugins/Virtual I was elated, so I tried it out, with exactly that configuration (almost -- my separator is '.'). I ran into several problems (using Dovecot 1.2.8 with http://hg.dovecot.org/dovecot-1.2/rev/9cccb8617820 applied): 1. I had to manually create the virtual folder for all my users or they couldn't access their mail at all. Is this fixed in 2.0? 2. My users were getting errors when accessing via POP3. The possible meaning of such a virtual folder under POP3 is lost on me, but I had to enable the virtual plugin for that protocol too. I think that should at least be in the documentation, or better yet the requirement should that it be enabled for POP3 should be dropped. 3. I couldn't get the virtual "conversation view" inbox to show any messages. But maybe that's because of a possible issue I describe below with x-mailbox 4. At some point I ended up with an empty mailbox called "private.virtual" --- I have no idea how. Probably user error. 5. The "all" virtual mailbox would only show 89 messages. I switched it to be a mirror of my "archive" mailbox and the number started to look more reasonable. This could be the "lots of mailboxes" bug describe in http://dovecot.org/list/dovecot-news/2009-December/000145.html 6. I got the impression that looking at the virtual INBOX didn't cause the "all" mailbox to be updated, which I'd guess that it should be. 7. I tried to create an IMAP search, rather than a virtual folder, that looked for x-mailbox INBOX header like the virtual folder does. It too came up empty. It doesn't exactly surprise me because I don't see an x-mailbox header in any of these messages. In fact, I can't find one in /any/ of my messages. When I look for a description of the x-mailbox header, I don't find much information on where it comes from or what it represents. http://www.dovecot.org/list/dovecot/2009-June/040619.html seems to indicate it's synthesized by the server. If it's really supposed to represent the message's "original" mailbox as implied by http://wiki.dovecot.org/Plugins/Virtual then I'm not sure what that means for messages that are filed twice by sieve and never moved. Lastly, I want to report that for me, the speed of these IMAP searches doesn't begin to approach what I can do with mairix if I want a message's entire thread. I'm happy to use mairix, although it would be nicer not to duplicate that capability if it's already in the server. But it needs to be fast. Is there something I can do to make it go faster? Thanks in advance for any advice, hints, fixes, workarounds, etc. -- Dave Abrahams Meet me at BoostCon: http://www.boostcon.com BoostPro Computing http://www.boostpro.com

4 12

Re: [Dovecot] Seen Flag doesn't work using imapflags
by Stephan Bosch 27 Jan '10

27 Jan '10

Ronny Reiher wrote: > Hi Stephan, > > many thanks for your great work on Sieve ! > > Since I have upgraded to Sieve v0.1.15 and ManageSieve v0.11.11 the "Seen Flag" doesn't work anymore. With your previous Version it was working fine. Maybe you can give me an hint how to solve this issue ? > > # Sieve Filter > # Erzeugt von Ingo (http://www.horde.org/ingo/) > > require ["imapflags", "fileinto"]; > > # spam > if anyof ( header :comparator "i;ascii-casemap" :contains "Delivered-To" "xxx(a)xxx.de", header :comparator "i;ascii-casemap" :contains "Subject" "*****SPAM*****" ) { > addflag "\\Seen"; > fileinto "spam"; > removeflag "\\Seen"; > stop; > } > Interesting. Looks like my bugfix exposed yet another bug. Your script worked previously because the removeflag command did not work properly. With 0.1.15 I fixed the removeflag command, thus breaking your script. The essence of the bug we face now is that for the deprecated imapflags extension (that you are using now) only the flag state at the end of the script is used for storing messages. This is now fixed: http://hg.rename-it.nl/dovecot-1.2-sieve/rev/a890258aa5a9 You can work around this issue by substituting "imapflags" with "imap4flags" in the script above. I've added some proper tests to the test suite to prevent this problem from re-occuring in the future. Regards, Stephan.

1 0

[Dovecot] STATUS command and total/read message count
by Florian Effenberger 27 Jan '10

27 Jan '10

Hello, I'm running Dovecot 1.0.15 with Thunderbird 3.0.1. TB can query folders for messages in two ways: Either by using the STATUS command, or by opening the folder (don't know the respective IMAP commands, sorry...). Querying via opening the folder is reliable, but via the STATUS command, only new/unread messages are shown. If I want to have the total number of (unread) mesages in a folder, I have to manually open it, so the headers are loaded. Is this a Dovecot issue, or a problem with Thunderbird? In other words: Does the STATUS command only return new/unread messages, or can this be configured on the server side? Thanks, Florian

3 6

[Dovecot] Plugin
by Alex Baule 27 Jan '10

27 Jan '10

Hello Everyone... Some time ago, i send some questions about plugins and concat 2 file handles. So, there is another questions about this. Timo Sirainen send to me this modification, in src/lib-storage/index/maildir/maildir-mail.c struct istream *full_input[3]; full_input[0] = i_stream_create_fd(fd, 0, TRUE); full_input[1] = i_stream_create_fd(fd1, 0, TRUE); full_input[2] = NULL; input = i_stream_create_concat(full_ input); This is necessary because my Header and Body is splited. This modification works fine. My question is: There is a way to do this with a plugin ? I dont know how to implement this in a plugin, because i dont know what is the hook to change the maildir_open_mail functions. (this is the function with the modification above) . Another question is: There is a seek function, in dovecot, and in zlib plugin, it is rewrite by another function, that use the "gzseek" to do the seek. My splited body will be encrypted, and the crypto no have seek, because the message will be encrypted. (if i open the message, decrypt and seek to some position, maybe work). The seek function is really necessary to IMAP and maildir ?

2 2

[Dovecot] maildir/cur/ - file names
by CoolAtt NNA 27 Jan '10

27 Jan '10

Hi All. I want to know how filenames are changed by dovecot e,g more details on how it renames the files when a mail is read. For read mails i found that it appends an S. 1264579250.P22376Q0M765148.ecs,S=1161:2 1264579250.P22376Q0M765148.ecs,S=1161:2,S Want to know if other modifications done in file names in INBOX & in SENT (maildir/.Sent/cur) Thanks CoolAtt _________________________________________________________________ Hotmail: Free, trusted and rich email service. https://signup.live.com/signup.aspx?id=60969

2 1

[Dovecot] Are Mail files in /Maildir/cur & /Maildir/.Sent read-only ?
by CoolAtt NNA 26 Jan '10

26 Jan '10

Hi ALL... I want to know if the files in /Maildir/cur & /Maildir/.Sent are modified by dovecot. I have a script which calculates the age of the mail files. I think that if they are continuously modified by dovecot I won't be able to calculate the age of the files. Can Anyone plz advise on this.... Thanks CoolAtt _________________________________________________________________ Windows Live: Make it easier for your friends to see what you’re up to on Facebook. http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/so…

4 3

[Dovecot] read-only dovecot-uidlist
by Cor Bosman 26 Jan '10

26 Jan '10

Hi all, i just investigated a user complaint and found a read-only dovecot-uidlist. Since dovecot couldnt write it, the process failed. Users can not reach this file, so how this became readonly is beyond me. Must be something in dovecot. Maybe an older bug? Doing a search now for more readonly uidlist files, but that'll take a few hours. Cor

2 3

[Dovecot] dovecot-antispam for dovecot 2.0?
by Adam Seering 26 Jan '10

26 Jan '10

Hi, Just wondering, is there a development version or the like of the dovecot-antispam plugin, that works with the Dovecot 2.0 beta? I'm starting to poke at the new version (mdbox looks really handy for my use case); I'm also starting to play with dspam, but I'm finding it annoying to train dspam without it having direct access to my (rather-large existing) spam folder... Thanks, Adam

2 1

[Dovecot] backup & restore mailbox files manually
by coolatt 26 Jan '10

26 Jan '10

Hi ALL... Am working on a solution to backup maildir mailboxes using rsync. All mailbox directories are mirrored on another machine. I need advise regarding restore of the INBOX & SENT files from the backup. For e.g , [1] Can I just copy "file-x-y-z" from /Maildir/cur to restore it on /Maildir/cur on the mailserver. [2] Can I do same for SENT emails ? Thanks CoolAtt -- View this message in context: http://old.nabble.com/backup---restore-mailbox-files-manually-tp27303434p27… Sent from the Dovecot mailing list archive at Nabble.com.

3 4

[Dovecot] Proxying to a DNS Name
by Andreas Schulze 26 Jan '10

26 Jan '10

Hello, reading the wiki I found http://wiki.dovecot.org/PasswordDatabase/ExtraFields/Proxy?highlight=(no DNS resolving) I have a setup where the destination of a proxyconnection is an DNS name. Is there a technical reason which currently require host= to be an IP address ? -- Andreas Schulze Internetdienste | P532 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

4 6

[Dovecot] acl flag to limit imap_acl based acl changes
by Amon Ott 26 Jan '10

26 Jan '10

Hi all! I have tried the imap_acl plugin with 1.2.9 today, but was not able to limit acl changes for those mailboxes where acl changes should be forbidden. http://wiki.dovecot.org/ACL says that "a" or "admin" covers "Administration rights to the mailbox". However, removing "a" from owner acl (using "lr") does not help, the user can still change all acl flags for all users with imap. Write accesses to mails are forbidden as they should. Is this intended or a bug? We would like to give all users the ability to use ACLs through IMAP, but the current behaviour endangers our read-only mail archives. Amon Ott -- Dr. Amon Ott - m-privacy GmbH Am Köllnischen Park 1, 10179 Berlin Tel: +49 30 24342334 Fax: +49 30 24342336 Web: http://www.m-privacy.de Handelsregister: Amtsgericht Charlottenburg HRB 84946 Geschäftsführer: Dipl.-Kfm. Holger Maczkowsky, Roman Maczkowsky GnuPG-Key-ID: EA898571

2 3

[Dovecot] dovecot 1.2.9 crash on subscribe with shared namespace
by Alessandro Bono 26 Jan '10

26 Jan '10

Hi all I'm testing dovecot to migrate from a cyrus 2.2 With TB2 if I use "subscribe" dovecot crash but only if I enable a shared namespace. Without explicit namespace or only with private namespace "subscribe" works Is this a problem already fixed in 1.2.10? is it a problem of my configuration? I tried different value for location in shared namespace but without any difference Below some info + gdb backtrace + dovecot -n Thanks Dovecot is version 1:1.2.9-1ubuntu2 from ubuntu lucid recompiled for ubuntu hardy on a xen domu amd64, fs is xfs warning: Can't read pathname for load map: Input/output error. Loaded symbols for /usr/lib/dovecot/imap Reading symbols from /lib/libdl.so.2...done. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/librt.so.1...done. Loaded symbols for /lib/librt.so.1 Reading symbols from /lib/libc.so.6...done. Loaded symbols for /lib/libc.so.6 Reading symbols from /lib/ld-linux-x86-64.so.2...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib/libpthread.so.0...done. Loaded symbols for /lib/libpthread.so.0 Reading symbols from /usr/lib/dovecot/modules/imap/lib01_acl_plugin.so...done. Loaded symbols for /usr/lib/dovecot/modules/imap/lib01_acl_plugin.so Reading symbols from /usr/lib/dovecot/modules/imap/lib02_imap_acl_plugin.so...Reading symbols from /usr/lib/debug/usr/lib/dovecot/modules/imap/lib02_imap_acl_plugin.so...done. done. Loaded symbols for /usr/lib/dovecot/modules/imap/lib02_imap_acl_plugin.so Core was generated by `imap [sandro(a)mydomain.com x.x.x.x]'. Program terminated with signal 11, Segmentation fault. [New process 7474] #0 0x00007fc4c0ff37f3 in t_malloc_real (size=512, permanent=false) at data-stack.c:306 306 data-stack.c: No such file or directory. in data-stack.c (gdb) bt full #0 0x00007fc4c0ff37f3 in t_malloc_real (size=512, permanent=false) at data-stack.c:306 block = <value optimized out> ret = <value optimized out> alloc_size = <value optimized out> #1 0x00007fc4c0ff39fb in t_buffer_get (size=512) at data-stack.c:445 ret = (void *) 0x7fffb4dfc090 #2 0x00007fc4c100730e in vstrconcat (str1=0x7fc4c1010413 "", args=0x7fffb4dfc070, ret_len=0x7fffb4dfc088) at strfuncs.c:161 str = <value optimized out> temp = 0x0 bufsize = 512 i = 0 len = <value optimized out> __PRETTY_FUNCTION__ = "vstrconcat" #3 0x00007fc4c1007a93 in t_strconcat (str1=0x200 <Address 0x200 out of bounds>) at strfuncs.c:265 args = {{gp_offset = 8, fp_offset = 48, overflow_arg_area = 0x7fffb4dfc150, reg_save_area = 0x7fffb4dfc090}} len = 140482972553720 #4 0x00007fc4c0fa7ee4 in shared_storage_get_namespace (_storage=0x7fc4c125e258, _name=0x7fffb4dfc1f8, ns_r=0x7fffb4dfc208) at shared-storage.c:216 user = (struct mail_user *) 0x7fc4c125b5b8 tab = <value optimized out> ns = <value optimized out> owner = <value optimized out> domain = 0x7fc4c125b607 "lazzero.com" username = 0x7fc4c1010413 "" userdomain = 0x0 name = 0x7fc4c1010413 "" p = <value optimized out> next = 0x0 dest = (const char **) 0x7fffb4dfc198 error = <value optimized out> prefix = <value optimized out> location = <value optimized out> ret = <value optimized out> static_tab = {{key = 117 'u', value = 0x0, long_key = 0x7fc4c1017c0b "user"}, {key = 110 'n', value = 0x0, long_key = 0x7fc4c10151ea "username"}, {key = 100 'd', value = 0x0, long_key = 0x7fc4c10151f3 "domain"}, {key = 104 'h', value = 0x0, long_key = 0x7fc4c10151c1 "home"}, {key = 0 '\0', value = 0x0, long_key = 0x0}} #5 0x00007fc4c0fa777f in shared_list_get_path (list=<value optimized out>, name=0x7fc4c1010413 "", type=MAILBOX_LIST_PATH_TYPE_DIR) at shared-list.c:93 ns = (struct mail_namespace *) 0x0 #6 0x00007fc4c0fa7798 in shared_list_get_path (list=<value optimized out>, name=0x7fc4c1010413 "", type=MAILBOX_LIST_PATH_TYPE_DIR) at shared-list.c:107 ns = (struct mail_namespace *) 0x7fc4c125e190 #7 0x00007fc4c0fa7798 in shared_list_get_path (list=<value optimized out>, name=0x7fc4c1010413 "", type=MAILBOX_LIST_PATH_TYPE_DIR) at shared-list.c:107 ns = (struct mail_namespace *) 0x7fc4c125e190 #8 0x00007fc4c0fa7798 in shared_list_get_path (list=<value optimized out>, name=0x7fc4c1010413 "", type=MAILBOX_LIST_PATH_TYPE_DIR) at shared-list.c:107 ns = (struct mail_namespace *) 0x7fc4c125e190 and so on # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.24-26-xen x86_64 Ubuntu 8.04.3 LTS xfs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /etc/ssl/certs/mydomain-server.pem ssl_key_file: /etc/ssl/private/mydomain-server.key ssl_cipher_list: ALL:!LOW:!SSLv2 verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_greeting: Mail server ready. verbose_proctitle: yes first_valid_uid: 113 last_valid_uid: 113 first_valid_gid: 122 last_valid_gid: 122 mail_privileged_group: mail mail_uid: 113 mail_gid: 122 mail_location: maildir:/var/spool/mail/%d/%n/Maildir:LAYOUT=fs mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): acl imap_acl mail_plugins(imap): acl imap_acl mail_plugins(pop3): mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve imap_client_workarounds(default): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(pop3): imap_client_workarounds(managesieve): imap_id_log(default): * imap_id_log(imap): * imap_id_log(pop3): imap_id_log(managesieve): pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %v.%u pop3_uidl_format(managesieve): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: shared separator: / prefix: shared/%%n location: maildir:/var/spool/mail/%%d/%%n/Maildir:INDEX=~/Maildir/shared/%%u:LAYOUT=fs list: children lda: postmaster_address: postmaster(a)mydomain.com hostname: mx1.mydomain.com mail_plugins: acl auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login realms: mydomain.com default_realm: mydomain.com verbose: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: static args: uid=113 gid=122 home=/var/spool/mail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: acl: vfile -- Cordiali Saluti Alessandro Bono

2 2

[Dovecot] Released Pigeonhole Sieve v0.1.15 and ManageSieve v0.11.11 for Dovecot v1.2.10
by Stephan Bosch 25 Jan '10

25 Jan '10

Hello Dovecot users, It's been a while since the last Pigeonhole Sieve and ManageSieve releases. That is why this release includes quite a few changes. Most interestingly, the include extension is updated to match the most recent specification, the Sieve interpreter now includes plugin support and ManageSieve now has support for enforcing quota on the size of scripts, the number of scripts and the space the scripts occupy on disk. Other than that, quite a few small bugs were fixed. One of which was in the i;ascii-numeric comparator. If one of the matched strings did not start with a digit, the comparator would always yield a 'less-than' result. In stead it should have considered the string starting with the non-digit character as having a positive infinite value. Elsewhere in this list, Julian Cowley pointed out that negative values also start with a non-digit character, which some people may not have understood (i.e. i;ascii-numeric works only on unsigned values). The bug fix in this release could therefore change result of certain misconceived (and probably spam-related) Sieve rules, so watch out! I started work on the spamtest(plus) and virustest extensions. These are implemented for the most part, but their configurability needs quite a bit more work. Changelog Sieve v0.1.15: * Enotify extension: - Adjusted notify method API for addition of new notification methods. - Set default importance level to 'normal' (was 'high'). * Include extension: updated implementation towards most recent specification (all should be backwards compatible): - Implemented global variables namespace. - Global command may now appear anywhere in a script. - Implemented script name checking using the requirements specified in the ManageSieve draft. - One issue remains: ManageSieve currently requires included scripts to be uploaded first, which is not according to specification. * Changed envelope path parser to allow to and from envelope addresses that have no domain part. + Added preliminary support for Sieve plugins and added support for installing Sieve development headers. + Started work on the implementation of the spamtest, spamtestplus and virustest extensions (unfinished). + Deprecated notify extension: implemented denotify command. + Variables extension: added support for variable namespaces. + Added configurable script size limit. Compiler will refuse to compile files larger than sieve_max_script_size. + Testsuite changes: - Added support for changing and testing an extension's configuration. - Added a command line parameter for copying errors to stderr. - Fixed a bug in the i;ascii-numeric comparator. If one of the strings started with a non-digit character, the comparator would always yield less-than. - Imap4flags extension: fixed bug in removeflag: removing a single flag failed due to off-by-one error (bug report by Julian Cowley). - Improved EACCES error messages for stat() and lstat() syscalls and slightly improved error messages that may uccur when saving a binary. - Vacation extension: fixed typo in runtime log message (patch by Julian Cowley). - Fixed use of minus '-' in man pages; it is now properly escaped. - Fixed parser recovery. In particular cases it would trigger spurious errors after an initial valid error and sometimes additional errors were inappropriately ignored. Changelog ManageSieve v0.11.11: * This release contains adjustments to match changes in the Sieve API. This means that this release will only compile against Pigeonhole Sieve v0.1.15. + Implemented ManageSieve QUOTA enforcement. + Added MAXREDIRECTS capability after login. + Implemented new script name rules specified in most recent ManageSieve draft. - Fixed assertion failure occuring with challenge-response SASL mechanisms. - Made configure complain about trying to compile against installed Dovecot headers alone. - Fixed compile warning for compilation against CMUSieve. The releases are available as follows: Sieve: http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.15.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-sieve-0.1.15.tar.gz.sig ManageSieve (package + patch): http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.11.tar.gz http://www.rename-it.nl/dovecot/1.2/dovecot-1.2-managesieve-0.11.11.tar.gz.… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.10-managesieve-0.11.11.diff… http://www.rename-it.nl/dovecot/1.2/dovecot-1.2.10-managesieve-0.11.11.diff… Refer to http://pigeonhole.dovecot.org for more information. Have fun testing the new releases and don't hesitate to notify me when there are problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

2 3

[Dovecot] still asserts with 1.2.10
by Matthias Rieber 25 Jan '10

25 Jan '10

Hi, I've still asserts while accessing virtual folders: Program terminated with signal 6, Aborted. [New process 6714] #0 0xf7e57556 in raise () from /lib/libc.so.6 #0 0xf7e57556 in raise () from /lib/libc.so.6 No symbol table info available. #1 0xf7e58d78 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x080f2eb5 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x97a9978 "imap [0x80f2ea1] -> imap [0x80f2f22] -> imap [0x80f2879] -> imap(index_search_result_update_flags+0x295) [0x80b2435] -> /usr/local/lib/dovecot/imap/lib20_virtual_plugin.so [0xf7ca238d] -> /usr/local/l"... #3 0x080f2f22 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x810baec "file %s: line %d (%s): assertion failed: (%s)", args=0xff805294 "?\021\bW") at failures.c:443 No locals. #4 0x080f2879 in i_panic (format=0x810baec "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #5 0x080b2435 in index_search_result_update_flags (result=0x97e49c8, uids=0xff805540) at index-search-result.c:87 search_arg = {next = 0x97be3d0, type = SEARCH_UIDSET, value = {subargs = 0x0, seqset = {arr = {buffer = 0x97a9528, element_size = 8}, v = 0x97a9528, v_modifiable = 0x97a9528}, str = 0x0, time = 0, size = 0, flags = 0, search_flags = 0, thread_type = MAIL_THREAD_NONE, keywords = 0x0, modseq = 0x0, search_args = 0x0, search_result = 0x0}, context = 0x0, hdr_field_name = 0x0, not = 0, match_always = 0, result = -1} ret = <value optimized out> __PRETTY_FUNCTION__ = "index_search_result_update_flags" #6 0xf7ca238d in virtual_sync_backend_boxes (ctx=0x97dd378) at virtual-sync.c:733 _data_stack_cur_id = 4 i = 0 ret = 97 #7 0xf7ca326b in virtual_storage_sync_init (box=0x97bca58, flags=65) at virtual-sync.c:1486 sync_ctx = <value optimized out> ret = <value optimized out> #8 0x080b6bd2 in mailbox_sync (box=0x1a3a, flags=65, status_items=239, status_r=0xff805728) at mail-storage.c:593 ctx = <value optimized out> #9 0x08065238 in cmd_select_full (cmd=0x97b6aa8, readonly=false) at cmd-select.c:273 client = (struct client *) 0x97b6818 box = (struct mailbox *) 0xff805798 ctx = (struct imap_select_context *) 0x97b6b58 args = (const struct imap_arg *) 0x97b9328 mailbox = 0x97a92f0 "spam/disagree/spamassassin" ret = <value optimized out> __PRETTY_FUNCTION__ = "cmd_select_full" #10 0x08065999 in cmd_select (cmd=0x97b6aa8) at cmd-select.c:389 No locals. #11 0x08067c7c in client_command_input (cmd=0x97b6aa8) at client.c:612 client = (struct client *) 0x97b6818 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x08067d19 in client_command_input (cmd=0x97b6aa8) at client.c:661 client = (struct client *) 0x97b6818 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067e8d in client_handle_input (client=0x97b6818) at client.c:702 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #14 0x080687ef in client_input (client=0x97b6818) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x97b69cc bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #15 0x080fbc50 in io_loop_handler_run (ioloop=0x97b11c8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x97b1c38 event = (const struct epoll_event *) 0x97b1c78 list = (struct io_list *) 0x97b6a50 io = (struct io_file *) 0x97b6a28 tv = {tv_sec = 1799, tv_usec = 999662} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #16 0x080fb0c0 in io_loop_run (ioloop=0x97b11c8) at ioloop.c:335 No locals. #17 0x080712fa in main (argc=) at main.c:327 No locals. Program terminated with signal 6, Aborted. [New process 11609] #0 0xf7db6556 in raise () from /lib/libc.so.6 #0 0xf7db6556 in raise () from /lib/libc.so.6 No symbol table info available. #1 0xf7db7d78 in abort () from /lib/libc.so.6 No symbol table info available. #2 0x080f2eb5 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x986b978 "imap [0x80f2ea1] -> imap [0x80f2f22] -> imap [0x80f2879] -> imap(index_search_result_update_flags+0x295) [0x80b2435] -> /usr/local/lib/dovecot/imap/lib20_virtual_plugin.so [0xf7c0138d] -> /usr/local/l"... #3 0x080f2f22 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x810baec "file %s: line %d (%s): assertion failed: (%s)", args=0xffc2fa54 "?\021\bW") at failures.c:443 No locals. #4 0x080f2879 in i_panic (format=0x810baec "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #5 0x080b2435 in index_search_result_update_flags (result=0x988a918, uids=0xffc2fd00) at index-search-result.c:87 search_arg = {next = 0x9888490, type = SEARCH_UIDSET, value = {subargs = 0x0, seqset = {arr = {buffer = 0x986b528, element_size = 8}, v = 0x986b528, v_modifiable = 0x986b528}, str = 0x0, time = 0, size = 0, flags = 0, search_flags = 0, thread_type = MAIL_THREAD_NONE, keywords = 0x0, modseq = 0x0, search_args = 0x0, search_result = 0x0}, context = 0x0, hdr_field_name = 0x0, not = 0, match_always = 0, result = -1} ret = <value optimized out> __PRETTY_FUNCTION__ = "index_search_result_update_flags" #6 0xf7c0138d in virtual_sync_backend_boxes (ctx=0x987f5b8) at virtual-sync.c:733 _data_stack_cur_id = 4 i = 0 ret = 97 #7 0xf7c0226b in virtual_storage_sync_init (box=0xbf304e8, flags=65) at virtual-sync.c:1486 sync_ctx = <value optimized out> ret = <value optimized out> #8 0x080b6bd2 in mailbox_sync (box=0x2d59, flags=65, status_items=239, status_r=0xffc2fee8) at mail-storage.c:593 ctx = <value optimized out> #9 0x08065238 in cmd_select_full (cmd=0x9878aa8, readonly=false) at cmd-select.c:273 client = (struct client *) 0x9878818 box = (struct mailbox *) 0x0 ctx = (struct imap_select_context *) 0x9878b58 args = (const struct imap_arg *) 0x987b328 mailbox = 0x986b2f0 "spam/disagree/spamassassin" ret = <value optimized out> __PRETTY_FUNCTION__ = "cmd_select_full" #10 0x08065999 in cmd_select (cmd=0x9878aa8) at cmd-select.c:389 No locals. #11 0x08067c7c in client_command_input (cmd=0x9878aa8) at client.c:612 client = (struct client *) 0x9878818 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x08067d19 in client_command_input (cmd=0x9878aa8) at client.c:661 client = (struct client *) 0x9878818 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #13 0x08067e8d in client_handle_input (client=0x9878818) at client.c:702 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #14 0x080687ef in client_input (client=0x9878818) at client.c:753 cmd = <value optimized out> output = (struct ostream *) 0x98789cc bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #15 0x080fbc50 in io_loop_handler_run (ioloop=0x98731c8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x9873c38 event = (const struct epoll_event *) 0x9873c78 list = (struct io_list *) 0x9878a50 io = (struct io_file *) 0x9878a28 tv = {tv_sec = 4, tv_usec = 299733} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #16 0x080fb0c0 in io_loop_run (ioloop=0x98731c8) at ioloop.c:335 No locals. #17 0x080712fa in main (argc=) at main.c:327 No locals. config: # 1.2.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-vserver-amd64-uml x86_64 Debian 5.0.3 log_path: /dev/stderr log_timestamp: protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /etc/dovecot/imap.scheff32.de.pem ssl_key_file: /etc/dovecot/imap.scheff32.de.pem disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login mail_max_userip_connections(default): 20 mail_max_userip_connections(imap): 20 mail_max_userip_connections(pop3): 10 mail_max_userip_connections(managesieve): 10 mail_location: maildir:~/Maildir mail_executable(default): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_process_size: 3072 mail_plugins(default): fts fts_squat zlib virtual mail_plugins(imap): fts fts_squat zlib virtual mail_plugins(pop3): zlib mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve namespace: type: private separator: \ prefix: mail\ hidden: yes list: no subscriptions: yes namespace: type: private separator: . inbox: yes list: yes subscriptions: yes namespace: type: private separator: . prefix: INBOX. list: no subscriptions: yes namespace: type: public separator: . prefix: shared. location: maildir:/home/sharedbox/Maildir/:INDEX=~/Maildir/shared list: yes subscriptions: yes namespace: type: private separator: . prefix: virtual. location: virtual:~/Maildir/virtual list: yes subscriptions: yes lda: postmaster_address: postmaster(a)scheff32.de mail_plugins: sieve sendmail_path: /usr/lib/sendmail log_path: info_log_path: syslog_facility: mail auth default: username_format: %n master_user_separator: * verbose: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf passdb: driver: passwd-file args: /etc/dovecot/passwd.masterusers master: yes userdb: driver: passwd args: system_groups_user=%u blocking=yes plugin: fts: squat fts_squat: partial=4 full=4 kind regards, matthias

2 2

[Dovecot] Delete messages with archivemail
by gstyle 25 Jan '10

25 Jan '10

Hi, I have set up a dovecot imap server (Version 1.0.15 on Debain Lenny). Until know I used courier. Every night I run a script calling archivemail ( http://archivemail.sourceforge.net/) to delete all messages in the Spam folder that are older than 30 days archivemail deletes the files directly in the Maildir folder. I am not using IMAP for this (cause I don't want to store the passwords in plain text). I know that dovecot uses index files to speed up Maildir access. Will there be any problems with the index files when I delete the old spam like this? Cheers Mario

4 5

[Dovecot] v1.2.10 released
by Timo Sirainen 25 Jan '10

25 Jan '10

http://dovecot.org/releases/1.2/dovecot-1.2.10.tar.gz http://dovecot.org/releases/1.2/dovecot-1.2.10.tar.gz.sig The Maildir bugs were common for everyone, although only NFS users seemed to notice for some reason. + %variables now support %{host}, %{pid} and %{env:ENVIRONMENT_NAME} everywhere. + LIST-STATUS capability is now advertised - maildir: Fixed several assert-crashes. - imap: LIST "" inbox shouldn't crash when using namespace with "INBOX." prefix. - lazy_expunge now ignores non-private namespaces.

1 0

[Dovecot] authentication with userdb and passdb fails
by Jure Lozar 25 Jan '10

25 Jan '10

Hello I cannot retrieve mail via pop3 using dovecot. I have mail in my mailbox (postfix works fine, maildir contains more then 5 mail files), I use virtual user. I also changed auth to plaintext for debugging purpuse. server: Dovecot 1.0.7 CenoOS 5.4 client: Thunderbird on Kubuntu, username: jure(a)hrabri.org pass:jure I tried different parameters and was closest to success with this: Relevant parts from dovecot.conf: auth default { mechanisms = plain login CRAM-MD5 userdb passwd-file { args = /home/vmail/%d/passwd } passdb passwd-file { args = /home/vmail/%d/shadow } log: Jan 24 16:23:49 hermes dovecot: auth(default): new auth connection: pid=3304 Jan 24 16:23:51 hermes dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=::ffff:192.168.0.144 rip=::ffff:192.168.0.112 resp= Jan 24 16:23:51 hermes dovecot: auth(default): client out: CONT 1 Jan 24 16:23:51 hermes dovecot: auth(default): client in: CONT 1 AGp1cmVAaHJhYnJpLm9yZwBqdXJl Jan 24 16:23:51 hermes dovecot: auth(default): passwd-file /home/vmail/hrabri.org/shadow: Read 1 users Jan 24 16:23:51 hermes dovecot: auth(default): passwd-file(jure@hrabri.org,::ffff:192.168.0.112): lookup: user=jure file=/home/vmail/hrabri.org/shadow Jan 24 16:23:51 hermes dovecot: auth(default): client out: OK 1 user=jure(a)hrabri.org Jan 24 16:23:51 hermes dovecot: auth(default): master in: REQUEST 1 3300 1 Jan 24 16:23:51 hermes dovecot: auth(default): passwd(jure@hrabri.org,::ffff:192.168.0.112): lookup Jan 24 16:23:51 hermes dovecot: auth(default): passwd(jure@hrabri.org,::ffff:192.168.0.112): unknown user Jan 24 16:23:51 hermes dovecot: auth(default): passwd-file /home/vmail/hrabri.org/passwd: Read 1 users Jan 24 16:23:51 hermes dovecot: auth(default): passwd-file(jure@hrabri.org,::ffff:192.168.0.112): lookup: user=jure file=/home/vmail/hrabri.org/passwd Jan 24 16:23:51 hermes dovecot: auth(default): master out: USER 1 jure(a)hrabri.org uid=501 gid=501 home=/home/vmail/hrabri.org/var/spool/mail/jure Jan 24 16:23:51 hermes dovecot: pop3-login: Login: user=<jure(a)hrabri.org>, method=PLAIN, rip=::ffff:192.168.0.112, lip=::ffff:192.168.0.144 Jan 24 16:23:52 hermes dovecot: POP3(jure(a)hrabri.org): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 I don't really understand this log. Is says Client out: OK, and then unknown user. Where? In passwd file? Adding domainname after username in passwd only makes it worse. And why master in? I did not configure master user. Thanks for any help. Jure

2 2

[Dovecot] pop3+leave messages on server
by Papp Tamas 24 Jan '10

24 Jan '10

hi All, I have a srange problem. Before dovecot there was a courier imap and it worked just fine. The client(s) are the same then before, so I think, this is an server side problem. I have a user with Outlook and he uses pop3 and leaves messages on server. Sometimes the messages get downloaded again, when he starts the outlook. Not all, but 7-9 hours back. uidl format is like it's suggested: pop3_uidl_format = %08Xu%08Xv Any idea, what's wrong and what I can do? Thank you very much, tamas

6 16

[Dovecot] strange behaviour with seen/unseen messages in virtual folders.
by Matthias Rieber 24 Jan '10

24 Jan '10

Hi, I've a virtual folder that contains unseen messages. When I mark the message and expunge the folder, the message should disappear. This works as expected in alpine. Alpine uses the following commands: 06000010 STORE 1 +Flags (\SEEN) 06000020 EXPUNGE Using roundcube mail, the message wont disappear, when I perform the same steps. RoundCube Mails sends: flg UID STORE 445 +FLAGS (\Seen) exp1 EXPUNGE But the message doesn't dissapear. But I can expunge it with alpine, as long as the folder contains one message. If it contains more messages, some or even all messages won't disappear. When I mark them as unseen/seen in alpine, I can expunge them with alpine. The expunge command send by roundcube mail never expunges any seen message in the unseen folder. Whether it was flagged as seen by alpine nor roundcube mail. kind regards, matthias

2 1

[Dovecot] Need simplest method for providing alternate mail location
by Stewart Dean 24 Jan '10

24 Jan '10

I am looking to migrate my DC V1.2 from mbox to maildir format....and want to do this in stages, user group by user group rather than in one horrendous fell swoop....since I'd rather fell things didn't happen. Since I'm running sendmail/procmail, I can change the ~/.procmailrc to change the writing of the INBOX, but the IMAP mail location access info is knottier when one wants to do things a bit at a time. Setting aside for now the matter of converting existing folders, I will be moving: = from a mbox setup with the INBOX in /var/spool/mail/<userid> and the folders in ~/mail = to both in ~/Maildir (unless someone has better ideas) It seems that one could: 1) Change the namespaces in the client...but this is not feasible, because it would means going out to all my 4000+ users desktop and modifying them. 2) Having some sort of db to tell DC it a mail_userdb extra field and override the mail_location in dovecot.conf 3) Perhaps waiting for DC v2.0 which will have this architected in. A) Is there any sense the v2.0 will be coming Real Soon Now and will fulfill #3? B) What's the simplest way to implement #2? I would really rather not install MySQL on my mail server and have all the overhead of installing and managing it when all I need it for is a temporary resource to tell DC where things are until the switchover is complete and Maildir is the default. Is it feasible to do this with an additional flat file in the /etc/passwd mode with some extra fields tacked on that is *only* used for mail location info? Or some other and simple way? My apologies if this is a Stupid Question............. -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] Compilation error
by Heiko Schlichting 24 Jan '10

24 Jan '10

Hi, the latest revision of dovecot 1.1 tree (576020ceda60) produces errors during compilation on Debian Lenny: [...] Making all in quota make[4]: Entering directory `/scratch/heiko/dovecot/dovecot-1-1-576020ceda60/src/plugins/quota' if /bin/sh ../../../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../src/lib -I../../../src/lib-dict -I../../../src/lib-index -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/lib-storage/index -I../../../src/lib-storage/index/maildir -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT quota-storage.lo -MD -MP -MF ".deps/quota-storage.Tpo" -c -o quota-storage.lo quota-storage.c; \ then mv -f ".deps/quota-storage.Tpo" ".deps/quota-storage.Plo"; else rm -f ".deps/quota-storage.Tpo"; exit 1; fi gcc -DHAVE_CONFIG_H -I. -I. -I../../.. -I../../../src/lib -I../../../src/lib-dict -I../../../src/lib-index -I../../../src/lib-mail -I../../../src/lib-storage -I../../../src/lib-storage/index -I../../../src/lib-storage/index/maildir -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT quota-storage.lo -MD -MP -MF .deps/quota-storage.Tpo -c quota-storage.c -fPIC -DPIC -o .libs/quota-storage.o quota-storage.c: In function 'quota_mailbox_sync_notify': quota-storage.c:339: error: 'namespaces' undeclared (first use in this function) quota-storage.c:339: error: (Each undeclared identifier is reported only once quota-storage.c:339: error: for each function it appears in.) Previous revision (af6526158608, 1.1.20) compiles without problems. Heiko Heiko Schlichting Freie Universität Berlin heiko(a)CIS.FU-Berlin.DE Zentraleinrichtung für Datenverarbeitung (ZEDAT) Telefon +49 30 838-54327 Fabeckstraße 32 Telefax +49 30 838454327 14195 Berlin

2 1

[Dovecot] Dovecot 1.2 & Thunderbird 3.0
by Proskurin Kirill 24 Jan '10

24 Jan '10

Hello. After updating to TB-3.0 I notice what sometimes messages in IMAP folder lost "seen flag". Entire folder star to be unseen fully. It happen often then I chose(click on it) some folder . Has some one have this bug too? root@mail [~]dovecot -n # 1.2.4: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.1-RELEASE-p7 i386 ufs base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-debug.log protocols: imap imaps pop3 pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000 ssl_ca_file: /usr/local/etc/certs/GlobalSignCA.crt ssl_cert_file: /usr/local/etc/certs/fxclub_org.crt ssl_key_file: /usr/local/etc/certs/fxclub_org.key ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_process_size: 128 login_processes_count: 20 login_max_processes_count: 512 mail_max_userip_connections(default): 256 mail_max_userip_connections(imap): 256 mail_max_userip_connections(pop3): 20 mail_max_userip_connections(managesieve): 10 verbose_proctitle: yes first_valid_gid: 0 mail_privileged_group: mail mail_uid: dmail mail_gid: dmail mail_location: maildir:/var/spool/dovecot/domains/%d/%n mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_process_size: 512 mail_plugins(default): quota imap_quota autocreate mail_log mail_plugins(imap): quota imap_quota autocreate mail_log mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve imap_client_workarounds(default): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): lda: postmaster_address: postmaster(a)fxclub.org hostname: mail.fxclub.org mail_plugins: sieve quota mail_plugin_dir: /usr/local/lib/dovecot/lda quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ %f %s log_path: /var/log/dovecot/deliver.log info_log_path: /var/log/dovecot/deliver.log sendmail_path: /usr/sbin/sendmail rejection_reason: Your message to <%t> was automatically rejected:%n%r auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login user: dovecot-auth username_format: %Lu worker_max_count: 100 passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: exim master: path: /var/run/dovecot/auth-master mode: 384 user: dmail plugin: quota: maildir quota_rule: *:storage=1024M quota_rule2: Trash:storage=1256M quota_rule3: SPAM:ignore quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 autocreate: Trash autocreate2: Sent autocreate3: Spam autosubscribe: Trash autosubscribe2: Sent autosubscribe3: Spam sieve_dir: ~/sieve sieve: ~/.dovecot.sieve sieve_global_path: /var/spool/dovecot/global.sieve mail_log_events: delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields: uid box msgid size mail_log_max_lines_per_sec: 0 -- Best regards. Proskurin Kirill

5 7

[Dovecot] SpamAssassin and i;ascii-numeric comparator
by Julian Cowley 24 Jan '10

24 Jan '10

Hi Stephan, I noticed that you changed i;ascii-numeric comparator recently (<http://hg.rename-it.nl/dovecot-1.2-sieve/rev/17fb38aee85f>) to correct a small bug. I have an interest in this because I use the comparator to check for SpamAssassin scores. Before the fix, this was all that was necessary to check for scores above a certain value: header :value "ge" :comparator "i;ascii-numeric" "X-Spam-Score" "5" Since SpamAssassin includes negative scores and the i;ascii-numeric comparator doesn't recognize negative numbers, all negative scores are actually treated as positive infinity after the fix. Of course, this means mail which has a negative score then gets counted as spam. Now an additional test is necessary, something like this: allof(not header :matches "X-Spam-Score" "-*", header :value "ge" :comparator "i;ascii-numeric" "X-Spam-Score" "5") I thought I'd mention this because other people may get affected by this once 0.1.15 comes out. Here is a patch that makes further tests for the comparator between numeric and non-numeric values. Hope you can use it. -=- julian

2 1

[Dovecot] how to create maildir on local mail delivery
by Sebastian Logar 24 Jan '10

24 Jan '10

Hi! I am using Dovecot 1.0.10 with LDA/postfix option reading user data from ldap, but the problem would be nonexistent maildir. Connection with ldap should be fine since reading proper maildir folder. Is it possible to auto creating maildir folders even on received mail since the you can auto create when user login with mail_executable scripts as it's seen from configuration I am doing for pop3 and imap. Jan 23 00:23:17 dovecot postfix/qmgr[14579]: 75AADD212F: from=<someuser(a)domain.tld>, size=354, nrcpt=1 (queue active) Jan 23 00:23:17 dovecot deliver(erikp): Loading modules from directory: /usr/lib/dovecot/modules/lda Jan 23 00:23:17 dovecot deliver(erikp): Module loaded: /usr/lib/dovecot/modules/lda/lib10_quota_plugin.so Jan 23 00:23:17 dovecot deliver(erikp): auth input: erikp Jan 23 00:23:17 dovecot deliver(erikp): auth input: home=/nas/5b/7d/5f/erikp/www Jan 23 00:23:17 dovecot deliver(erikp): auth input: uid=5000 Jan 23 00:23:17 dovecot deliver(erikp): auth input: gid=5000 Jan 23 00:23:17 dovecot deliver(erikp): auth input: mail=/nas/5b/7d/5f/erikp/Maildir/ Jan 23 00:23:17 dovecot deliver(erikp): auth input: quota=maildir:storage=100000000 Jan 23 00:23:17 dovecot deliver(erikp): Home dir not found: /nas/5b/7d/5f/erikp/www Jan 23 00:23:17 dovecot deliver(erikp): maildir autodetect: stat(/nas/5b/7d/5f/erikp/Maildir//cur) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: data=/nas/5b/7d/5f/erikp/Maildir/ Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: INBOX file: stat(/nas/5b/7d/5f/erikp/Maildir/) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: has .imap/: stat(/nas/5b/7d/5f/erikp/Maildir//.imap) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: has inbox: stat(/nas/5b/7d/5f/erikp/Maildir//inbox) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): mbox autodetect: has mbox: stat(/nas/5b/7d/5f/erikp/Maildir//mbox) failed: No such file or directory Jan 23 00:23:17 dovecot deliver(erikp): Ambiguous mail location setting, don't know what to do with it: /nas/5b/7d/5f/erikp/Maildir/ (try prefixing it with mbox: or maildir:) Jan 23 00:23:17 dovecot deliver(erikp): Failed to create storage for 'erikp' with mail '/nas/5b/7d/5f/erikp/Maildir/' Jan 23 00:23:17 dovecot postfix/pipe[15537]: 75AADD212F: to=<erikp(a)somelocaldomain.tld>, relay=dovecot, delay=2146, delays=2146/0.02/0/0.02, dsn=4.3.0, status=deferred (temporary failure) dovecot -n # 1.0.10: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap.sh mail_executable(imap): /usr/lib/dovecot/imap.sh mail_executable(pop3): /usr/lib/dovecot/pop3.sh mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail plugin: quota: maildir:storage=100000 Regards, Sebastian

2 5

[Dovecot] feature question: local delivery from SMTP
by Phil Howard 23 Jan '10

23 Jan '10

Does Dovecot really need a separate MTA for inbound mail? Or can it receive SMTP directly if there is no forwarding to do? What about spam/virus filtering in that case? -- Phil Howard KA9WGN - ka9wgn(a)gmail.com

6 7

[Dovecot] Mail process plans: multiple connections in a process + idle processes
by Timo Sirainen 23 Jan '10

23 Jan '10

Maybe for v2.1: imap and pop3 processes can currently handle multiple connections, but they're assigned pretty much randomly to processes. It would be better if it was possible to: a) Require that a process handles only a specific user's connections b) Require that a process handles only a specific UNIX UID's connections (e.g. if each domain has a separate UID) c) Prefer to put user's connections to same process, but don't require it. To do this, there needs to be a process between imap/pop3-login and imap/pop3. Let's call it imap/pop3-tracker process (or aggregator? or any suggestions?). This process accepts all connections coming from login processes when they've finished authenticating a connection. Internally it figures out if the connection should go to a new or an existing process. It keeps track of username -> { mail_process[], cookie (see idle processes below) } mail_process -> { unix_socket_fd, connection_count } So there's a connection to each mail process. This connection is used to send connection fds for the process to handle. It's also used to receive notifications when a connection is closed. The mail process sockets could also be used to communicate to a specific process. For example doveadm could use this in future to ask what a specific user or process is currently doing, by connecting to imap-tracker, which forwards the request to wanted process(es). The above isn't really anything new, just a more specific plan about what I had been thinking for a long time. A new and more interesting idea is to gather IDLEing imap connections under a few imap-idle processes: When a connection has been IDLEing for a few minutes (or something), and there's no special state in the connection (e.g. CONTEXT=SEARCH searches), the connection could be moved to a separate imap-idle process that simply waits for something to happen. When something does happen, it'll move the connection back to imap process, which restores state and continues. The idea would be to reduce the number of idling imap processes that are wasting memory. The state that needs to be saved and restored is: - selected mailbox name, GUID, UIDVALIDITY (for reliably selecting back the original mailbox, or reliably fail if it's gone) - flag: mailbox is EXAMINEd, not SELECTed - highest seen modseq - UIDs of \Recent messages - SEARCHRES extension: last saved SEARCH result - List of keywords that had been advertised in FLAGS/PERMANENTFLAGS reply to client. Or probably MD5 sum of it would be enough. If MD5 had changed, the list would be re-sent to client. - connection fd - paths that are being monitored with [id]notify/kqueue Connection is moved back when a) new command is received from connection fd, b) one of the monitored files changes. The connections are moved back via imap-tracker process, by sending the saved state along the request. For security there's a per-user security cookie (128 bits of randomness), which is sent to imap processes, and when restoring connection from imap-idle, the request must provide the correct cookie or imap-tracker fails the login. (Normally new post-login imap/pop3 connections can't be created without having authenticated first via dovecot-auth. They verify it.) So when connection comes back, imap process opens the mailbox based on saved information. If this fails for some reason (e.g. mailbox deleted), client gets disconnected. Next Dovecot gets a list of changes to mailbox since the saved modseq, and based on that sends the missing FETCH, EXPUNGE, EXISTS and RECENT events. Again if it somehow fails, the client gets disconnected. At least initially this would only be done for connections that are running IDLE command, because non-IDLE connections are a lot more difficult to restore to their original state. This is mainly because if a message gets expunged, it's still visible to the connection until it issues a command that allows sending EXPUNGE event. To handle that, there would have to be code that allows building a view of mailbox where there are some expunged messages. Also it can be difficult to find out the expunged messages' flags, unless they're also part of the saved state.

1 1

[Dovecot] format of file dict
by Frank Cusack 22 Jan '10

22 Jan '10

For shared (between users) mailboxes, I am using a file dict. plugin { acl_shared_dict = file:/etc/dovecot/acl_shared_dict/shared.db } What is the format of this file? I would like to manage it directly rather than have SETACL update it. I see lines which describe a sharing entry (the format of those looks obvious) but also lines with just a '1'. Do I just need to separate entries by lines with just '1' in them? -frank

2 1

[Dovecot] Thinderbird+delete+move to Trash folder
by Papp Tamás 22 Jan '10

22 Jan '10

hi All, I have a problem, which makes me headache. I can't find out, what is the problem. I have a mail szerver, which works just fine as expected, TB move messages to trash folder after I delete it, and they are moved. I have an other server. If I delete a message, it doesn't move to the Trash folder. As deleted_to_trash plugin is installed, if I only mark messages as deleted, they are moved to thee Trash folder and also with Outlook works well. It's like when a messages is deleted from TB, the message get moved to the Trash folder, and it's expunged(?) at the same time. Is it possible? Could you help me? The system is Ubuntu 9.04 with docecot 1.2.5-0~auto+0 from http://xi.rename-it.nl/debian/, but builded by myself for x86_64. Thank you, tamas

6 15

[Dovecot] Modifying the underlying maildir externally (webmail, replication)
by Attila Nagy 22 Jan '10

22 Jan '10

Hello, I have a setup where there are multiple maildir users, one of them being the pop/imap server itself, the others are for example a maildir capable webmail and message replication. I would like to evaluate Dovecot, but I wonder how would its binary indexes and logs fit into this picture. After running through http://wiki.dovecot.org/IndexFiles I'm not sure how well would Dovecot work with other programs modifying the maildirs (adding, deleting, moving messages, folders etc). The "Main index" section says "The index file is synchronized against mailbox only if the syncing information changes.", where syncing information consists or cur and new directories' timestamps. Does that mean I am safe there? The cache file is hopefully just a cache, so it won't contain information from messages which are inserted or moved by an external program, and I assume Dovecot fetches the message lists and other information from the main index, which seems to be OK. The transaction log is for the main index, so if the latter is OK, the former should be OK too. http://wiki.dovecot.org/MailboxFormat/Maildir talks about MUAs and there nothing scary can be found, except for some temporary conditions, where the changes won't propagate to Dovecot in real time, but it's OK. Are the above right, and can Dovecot use its indexes and caches safely with others using the same maildirs? Thanks,

3 3

[Dovecot] ldap login with userid
by spamvoll＠googlemail.com 22 Jan '10

22 Jan '10

hi.. Dovecot Version 1.2.9 im trying to login to dovecot with my ldap uid. currently im using: user_attrs = homeDirectory=home,uid=mail=maildir:/mail/%$ user_filter = (&(objectClass=gosaMailAccount)(|(mail=%u)(gosaMailAlternateAddress=%u))) to match the mailaddress and deliver the mail to the users homdir (/mail/uid_of_the_user) But i cant login to dovecot: pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=gosaMailAccount)(uid=%u)) the Log: Jan 22 17:21:51 testimap dovecot: auth(default): client in: AUTH 1 PLAIN service=imap secured lip=10.0.0.15 rip=10.0.0.20 lport=993 rport=36879 Jan 22 17:21:51 testimap dovecot: auth(default): client out: CONT 1 Jan 22 17:21:51 testimap dovecot: auth(default): client in: CONT 1 AG1zbWlhdGVrAHRpYWFrdGVuZXI= Jan 22 17:21:51 testimap dovecot: auth(default): ldap(myuser,10.0.0.20): bind search: base=dc=example,dc=com filter=(&(objectClass=gosaMailAccount)(uid=myuser)) Jan 22 17:21:51 testimap dovecot: auth(default): ldap(myuser,10.0.0.20): result: uid(user)=myuser Jan 22 17:21:51 testimap dovecot: auth(default): client out: OK 1 user=myuser Jan 22 17:21:51 testimap dovecot: auth(default): master in: REQUEST 1 2541 1 Jan 22 17:21:51 testimap dovecot: auth(default): passwd(myuser,10.0.0.20): lookup Jan 22 17:21:51 testimap dovecot: auth(default): passwd(myuser,10.0.0.20): unknown user Jan 22 17:21:51 testimap dovecot: auth(default): ldap(myuser,10.0.0.20): user search: base=dc=example,dc=com scope=subtree filter=(&(objectClass=gosaMailAccount)(|(mail=myuser)(gosaMailAlternateAddress=myuser))) fields=homeDirectory,uid Jan 22 17:21:51 testimap dovecot: auth(default): ldap(myuser,10.0.0.20): Unknown user Jan 22 17:21:51 testimap dovecot: auth(default): userdb(myuser,10.0.0.20): user not found from any userdbs Jan 22 17:21:51 testimap dovecot: auth(default): master out: NOTFOUND 1 Jan 22 17:21:51 testimap dovecot: imap-login: Internal login failure (auth failed, 1 attempts): user=<myuser>, method=PLAIN, rip=10.0.0.20, lip=10.0.0.15, TLS any ideas ?

2 1

[Dovecot] config file option to switch off CONDSTORE support?
by Harald Dunkel 22 Jan '10

22 Jan '10

Hi folks, Is there some config file option to switch off CONDSTORE support? Of course I checked the manual on the Wiki, but I haven't seen CONDSTORE mentioned at all. Forgive me if I am too blind to see. Many thanx Harri

2 1

[Dovecot] when does dovecot create a mailbox
by spamvoll＠googlemail.com 22 Jan '10

22 Jan '10

hi.. im using ldap. what happens when i add a new ldap user and that user tryes to login to dovecot ? does dovecot create the mailbox on first login? or do i have to send a mail first ? thx

2 1

[Dovecot] Files Moving From /New to /Cur
by Tony Rutherford 22 Jan '10

22 Jan '10

Using Dovecot 1.2-9 with Maildir and layout=FS. We have our own delivery pushing messages to the /new and then /cur folder eventually. When I have an IMAP client attached, there is apparently some sort of race going on. I believe that Dovecot is moving files from /new to /cur (and renaming them) before our own delivery gets the job done. This is causing a problem for us. Is there a way to disable this in Dovecot? I have the LDA section commented out of the config file..so I don't think that's in play. Bottom line is that I don't want Dovecot to move any files around whether an IMAP client is attached or not (except for handling the IMAP COPY/APPEND). Regards, Tony

2 2

[Dovecot] Seen flag bug in Mozilla Thunderbird - BugID 541337 - "old messages are marked as unread"
by Christian Rohmann 22 Jan '10

22 Jan '10

Just wanted to share the bad news: https://bugzilla.mozilla.org/show_bug.cgi?id=541337 It seems that Dovecot is really showing the Mozilla Thunderbird team how to read and use an RFC ;-) -- Christian Rohmann Content Delivery Server u. Dienste Network Engineering & Design NETCOLOGNE Gesellschaft für Telekommunikation mbH Am Coloneum 9 | 50829 Köln Tel: 0221 2222-5751 | Fax: 0221 2222-75751 http://www.netcologne.de Geschäftsführer: Werner Hanf Dipl.-Ing. Karl-Heinz Zankel HRB 25580, AG Köln

2 1