- dovecot - dovecot.org

[Dovecot] Better APPEND performance
by Mike Abbott 16 Oct '09

16 Oct '09

Moving a large number of messages into an IMAP folder on a dovecot server takes quite a long time. This is a popular operation for users migrating their stored messages from their old mail servers through a mail user agent, and it causes a poor first impression of dovecot. I'd like your help to speed this up. I have studied this problem in recent versions, including 1.1.[17-19] and 1.2.[4-6] but I'll focus on 1.2.6, using Maildir++. It seems to be caused by O(n^2) behavior in maintaining the UID list, where n is the number of messages. The client selects a folder then sends thousands of individual APPEND commands (no use of multiappend unfortunately). These cause dovecot to behave as follows: 1. For every other APPENDed message, dovecot appends the new UID to the list quickly. No problem here, this is fast. 2. For every other other APPENDed message, dovecot scans the entire UID list. This is an O(n) algorithm. Since it happens every n/2 times it causes O(n^2) behavior across n consecutive APPENDs. More specifically, 1. APPEND a message to a folder that already contains 30,000 messages. maildir_uidlist_refresh_fast_init() takes the fast path. 2. APPEND a second message to the same folder. maildir_uidlist_refresh_fast_init() takes the slow path: it populates the uidlist->files hash table with all the UIDs, checking for duplicates. At the end of the command maildir_uidlist_deinit() destroys the hash table. Note how this APPEND takes much longer than #1. 3. APPEND a third message to the same folder. Just like #1. 4. APPEND a fourth message to the same folder. Just like #2, and since #2 destroyed the hash, it has to do all that work over again. 5. And so on. What can be done to make maildir_uidlist_refresh_fast_init() choose the fast path more often?

3 6

[Dovecot] v2.0.alpha1 released
by Timo Sirainen 16 Oct '09

16 Oct '09

http://dovecot.org/releases/2.0/alpha/dovecot-2.0.alpha1.tar.gz http://dovecot.org/releases/2.0/alpha/dovecot-2.0.alpha1.tar.gz.sig So here's the first alpha version of Dovecot v2.0. There are still a couple of things left to do, but in general it should work for most people. I started using it for my own mails a few days ago and it seems to work without errors. Largest changes since v1.2: * Global ACLs are now looked up using namespace prefixes. For example if you previously had INBOX. namespace prefix and a global ACL for "INBOX.Sent", it's now looked up from "INBOX.Sent" file instead of "Sent" as before. + Redesigned master process. It's now more modular and there is less code running as root. + Configuration supports now per-local/remote ip/network settings. + dsync utility does a two-way mailbox synchronization. + LMTP server and proxying. + Added mdbox (multi-dbox) mail storage backend. + doveadm utility can be used to do all kinds of administration functions. Old dovecotpw and *view utilities now exist in its subcommands. Some things left to do: - Do something about backwards compatibility with v1.x. Either make it read v1.x config files or provide some config conversion utility. - dsync still has some bugs - config process is a bit too slow. config handling in general could use some caching all around. no need to ask configuration for each login unless there are per-remote-ip settings. - some kind of an optional connection policy server could be useful. mainly to finally implement tcp-wrappers support. - mail_uid, mail_gid, mail_chroot settings don't really work now. I think this actually needs a bit larger change, which is probably a good idea in any case: After successfully authenticating, login process needs to get imap/pop3 process executed. Currently this is done by transferring the connection fd to master process, doing userdb lookup and then forking and execing the imap/pop3 process. The new behavior I'm thinking is that after auth, login process would connect to imap/pop3 unix socket in the login/ directory. That would cause master process to fork a new imap/pop3 process (running as root). Login process would send the necessary auth information via the unix socket, possibly transfer also the fd, and imap/pop3 would do the userdb lookup and then drop privileges. This change has some pros: - Master process will no longer temporarily hold some extra fds and use extra memory during auth lookups. If auth process is hanging these could cause problems. - Master process will no longer have any special auth handling code and I can remove type=auth-source and type=auth services. - Of course fixes the mail_* setting issue, because all of this is now done by imap/pop3 process, which knows about these settings. - Creating support for "multiple imap/pop3 post-login connections in a single process" should be pretty easy to implement with this. The imap/pop3 unix socket just needs to be listened by a new process in the middle that keeps track of what imap/pop3 processes exist and can redirect the new connections to those. But also some cons: - drop_priv_before_exec=yes no longer works, unless the uid/gid is hardcoded to the service {} block. - Each imap/pop3 process needs to do a connect() to auth server at startup, adding a bit to the latency.

7 21

[Dovecot] Expire issue
by Emmanuel Gonzalez 16 Oct '09

16 Oct '09

Hello guys, I'm trying to configure de expire plug in, all the configuration seems to be right but when I launch # /opt/dovecot/sbin/dovecot --exec-mail ext /opt/dovecot/libexec/dovecot/expire-tool --test Error: userdb(user(a)mydomain.it) didn't return uid Info: User lookup failed: user(a)mydomain.it even if I see in the logs that the authentication process worked fine (ldap): dovecot: 2009-10-16 15:33:03 Info: auth(default): master in: USER 1 user(a)mydomain.it service=expire dovecot: 2009-10-16 15:33:03 Info: auth(default): ldap(user(a)mydomain.it): user search: base=dc=mydomain,dc=it scope=subtree filter=(&(objectClass=inetOrgPerson)(mail=user(a)mydomain.it)) fields=mailMessageStore,mailquota dovecot: 2009-10-16 15:33:03 Info: auth(default): ldap(user(a)mydomain.it): result: mailMessageStore(home)=/var/vmail/0/0/0/4/0 mailquota(quota_rule=*:backend)=104857600S dovecot: 2009-10-16 15:33:03 Info: auth(default): master out: USER 1 user(a)mydomain.it home=/var/vmail/0/0/0/4/0 quota_rule=*:backend=104857600S here my conf: # OS: SunOS 5.9 sun4v log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 listen(default): *:143 listen(imap): *:143 listen(pop3): *:10100 ssl_disable: yes ssl_cert_file: /opt/csw/etc/dovecot.pem ssl_key_file: /opt/csw/etc/dovecot.pem disable_plaintext_auth: no login_dir: /opt/dovecot/var/run/dovecot/login login_executable(default): /opt/dovecot/libexec/dovecot/imap-login login_executable(imap): /opt/dovecot/libexec/dovecot/imap-login login_executable(pop3): /opt/dovecot/libexec/dovecot/pop3-login first_valid_uid: 1 first_valid_gid: 12 mail_privileged_group: daemon mail_uid: 1 mail_gid: 12 mail_location: maildir:%h mail_debug: yes mail_executable(default): /opt/dovecot/libexec/dovecot/imap mail_executable(imap): /opt/dovecot/libexec/dovecot/imap mail_executable(pop3): /opt/dovecot/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota expire mail_plugins(imap): quota imap_quota expire mail_plugins(pop3): quota expire mail_plugin_dir(default): /opt/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /opt/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /opt/dovecot/lib/dovecot/pop3 pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): UID%u-%v pop3_logout_format(default): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(imap): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(pop3): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s, bytes=%i/%o auth default: master_user_separator: * verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /opt/dovecot/etc/passwd.masterusers master: yes passdb: driver: ldap args: /opt/dovecot/etc/dovecot-ldap.conf userdb: driver: ldap args: /opt/dovecot/etc/dovecot-ldap-userdb.conf socket: type: listen master: path: /opt/dovecot/var/run/dovecot/auth-master mode: 384 user: dovecot group: dovecot plugin: quota: maildir expire: Trash 1 Trash/* 1 Spam 30 expire_dict: proxy::expire dict: expire: db:/opt/dovecot/var/lib/dovecot/expire.db and ldap one: # cat /opt/dovecot/etc/dovecot-ldap.conf |grep -v "#"|grep -v ^$ hosts = localhost sasl_bind = no auth_bind = yes ldap_version = 3 base = dc=mydomain,dc=it scope = subtree user_attrs = mailMessageStore=home,mailquota=quota_rule=*:backend user_filter = (&(objectClass=inetOrgPerson)(mail=%u)) pass_attrs = mail=user,userPassword=password,mailMessageStore=userdb_home pass_filter = (&(objectClass=inetOrgPerson)(mail=%u)) I also tried to set user_attrs = *uid=uid,*mailMessageStore=home,mailquota=quota_rule=*:backend but i didn't solve the problem. Any ideas? thanx in advance! -- Emmanuel Gonzalez

2 3

[Dovecot] "From" address in vacation response on hosted domains with dovecot/postfix/sieve
by Peter Borg 16 Oct '09

16 Oct '09

Hi, I have a working dovecot/postfix/sieve configuration: Ubuntu 8.04 LTS Dovecot 1.2.6 Sieve 0.1.12 Postfix 2.5.1 The server is configured to host multiple domains. All mail delivery, logins and aliases work absolutely perfectly. There's only one weirdness: the 'From' address in vacation responses. If a message is sent to user(a)hosteddomain.com the response comes from user-hosteddomain.com(a)hostingservername.com Obviously it's doing what one would expect in that it's taking the username (user-hosteddomain.com) and appending the local host name (hostingservername.com) This isn't great from the perspective of the hosted user, however, who'd much rather their vacation message was sent from their actual email address. Clearly I can modify this by using a ':from' statement in each relevant sieve file, but I can't rely on users' mail clients to set this (as not all do) and the webmail client in use on the server doesn't set this. I can almost certainly implement some kind of hack using this, but I'd rather not. So how does sieve determine the from address to use if it's not explicitly set in the sieve script for the user, and how can I direct sieve to determine the address differently, preferably with a central configuration option that will apply to all users regardless of domain.....? Regards, Peter.

1 0

[Dovecot] Internal server
by Guy 16 Oct '09

16 Oct '09

Hi, I'm looking at doing some testing for a little internal IMAP server. Basically use fetchmail (or some such thing to bring in mail) so users have a local IMAP server to connect to. I'm interested in trying out mdbox, but since I'd have to use dovecot 2.0 with it I thought I'd just check what peoples' experience with 2.0 is like so far? Is it reasonably stable already? Is there also a page showing the differences in config for dbox over maildir? Or is it simply just the change in mail_location and nothing else? Thanks Guy -- Don't just do something...sit there!

2 1

[Dovecot] FS Quota broken for delivering BIG message
by Kostik 16 Oct '09

16 Oct '09

Hi everybody. I have Linux file system quota for users and enabled "fs quota" and quota plugin for LDA. My test user is already deep over quoted: --- Filesystem blocks quota limit nfse:/export 23768* 10240 10240 --- 1. If I tries to deliver _short_ message to user mbox - quota works: $ echo "123123123123" | /usr/local/libexec/dovecot/deliver -d koc --- Quota root: name=Quota backend=fs args=group:mount=/var/virtual/home/I/I/koc Quota rule: root=Quota mailbox=* bytes=10383360 messages=0 mbox: data=~/:INBOX=/var/virtual/mail/I/I/koc:INDEX=MEMORY fs: root=/var/virtual/home/I/I/koc, index=, control=, inbox=/var/virtual/mail/I/I/koc fs quota add storage dir = /var/virtual/home/I/I/koc fs quota block device = nfse:/export fs quota mount point = /mount/m5 quota-fs: host=nfse, path=/export, gid=5751796, bytes quota-fs: gid=5751796, value=24338432, limit=10485760, active=1 from=<>, msgid=: save failed to INBOX: Quota exceeded (mailbox for user is full) from=<>, msgid=: rejected: Quota exceeded (mailbox for user is full) msgid=: Return-Path missing, rejection reason: Quota exceeded (mailbox for user is full) --- 2. But if I tries to deliver _BIG_ message to user mbox - quota broken: $ cat big.msg | /usr/local/libexec/dovecot/deliver -d koc --- Quota root: name=Quota backend=fs args=group:mount=/var/virtual/home/I/I/koc Quota rule: root=Quota mailbox=* bytes=10383360 messages=0 mbox: data=~/:INBOX=/var/virtual/mail/I/I/koc:INDEX=MEMORY fs: root=/var/virtual/home/I/I/koc, index=, control=, inbox=/var/virtual/mail/I/I/koc fs quota add storage dir = /var/virtual/home/I/I/koc fs quota block device = nfse:/export fs quota mount point = /mount/m5 quota-fs: host=nfse, path=/export, gid=5751796, bytes quota-fs: gid=5751796, value=24338432, limit=10485760, active=1 write_full(/var/virtual/home/I/I/koc/.temp.pigeon01.8822.64dfacc7e57d71b4) failed: Disk quota exceeded stat(/tmp/Dovecot Delivery Mail) failed: Disk quota exceeded from=<>, msgid=: save failed to INBOX: BUG: Unknown internal error --- This "write_full() failed" from: src/lib/istream-seekable.c --- static ssize_t i_stream_seekable_read(struct istream_private *stream) { ... /* save to our file */ data = i_stream_get_data(sstream->cur_input, &size); if (write_full(sstream->fd, data, size) < 0) { i_assert(errno != 0); stream->istream.stream_errno = errno; i_error("write_full(%s) failed: %m", sstream->temp_path); i_stream_close(&stream->istream); return -1; } ... } --- =kostik

2 2

[Dovecot] Dovecot inactive after an intermittent connection with LDAP
by Thu Nguyen 16 Oct '09

16 Oct '09

Hello all, I'm facing the problem below: 1. Firstly, the connection between dovecot and ldap was down. dovecot: Oct 10 09:11:12 Info: auth(default): ldap(user1,x.x.x.x): Aborting (timeout), we're not connected to LDAP server dovecot: Oct 10 09:11:12 Info: auth(default): master out: USER 265490 user1 2. There is many new connection from user created.... dovecot: Oct 10 09:11:12 Info: auth(default): new auth connection: pid=21114 dovecot: Oct 10 09:11:12 Info: auth(default): new auth connection: pid=21113 3. ....but it obviously failed. dovecot: Oct 10 09:11:12 Info: pop3-login: Internal login failure (auth failed,1 attempts): user=<user1>, method=PLAIN, rip=x.x.x.x, lip= x.x.x.x dovecot: Oct 10 09:11:12 Info: pop3-login: Internal login failure (auth failed,1 attempts): user=<user2>, method=PLAIN, rip= x.x.x.x,lip= x.x.x.x ................. dovecot: Oct 10 09:11:15 Info: auth(default): new auth connection: pid=21125 dovecot: Oct 10 09:11:15 Info: auth(default): new auth connection: pid=21126 dovecot: Oct 10 09:11:22 Info: auth(default): client in: AUTH 1 PLAIN service=pop3 lip= x.x.x.x rip= x.x.x.x lport=110 rport=4504 resp=<hidden> dovecot: Oct 10 09:11:22 Info: auth(default): client in: AUTH 1 PLAIN service=pop3 lip= x.x.x.x rip= x.x.x.x lport=110 rport=6316 resp=<hidden> dovecot: Oct 10 09:11:22 Info: auth(default): new auth connection: pid=21132 dovecot: Oct 10 09:11:24 Info: auth(default): client in: AUTH 1 PLAIN service=pop3 lip= x.x.x.x rip= x.x.x.x lport=110 4. LDAP connection is back to normal, however, it still failed. dovecot: Oct 10 09:14:14 Info: auth(default): new auth connection: pid=21250 dovecot: Oct 10 09:14:14 Info: auth(default): new auth connection: pid=21251 dovecot: Oct 10 09:14:14 Info: auth(default): client in: AUTH 1 PLAIN service=pop3 lip= x.x.x.x rip= x.x.x.x lport=110 rport=2959 resp=<hidden> dovecot: Oct 10 09:14:14 Info: pop3-login: Disconnected: Inactivity (auth failed, 1 attempts): method=PLAIN, lip= x.x.x.x rip= x.x.x.x dovecot: Oct 10 09:14:15 Info: pop3-login: Disconnected: Inactivity (auth failed, 1 attempts): method=PLAIN, lip= x.x.x.x rip= x.x.x.x dovecot: Oct 10 09:14:15 Info: pop3-login: Disconnected: Inactivity (auth failed, 1 attempts): method=PLAIN, lip= x.x.x.x rip= x.x.x.x dovecot: Oct 10 09:14:15 Info: auth(default): client in: AUTH 1 PLAIN service=pop3 lip= x.x.x.x rip= x.x.x.x lport=110 rport=3765 resp=<hidden> dovecot: Oct 10 09:14:15 Info: auth(default): client in: AUTH 1 PLAIN service=pop3 lip= x.x.x.x rip= x.x.x.x lport=110 rport=48 08 resp=<hidden> dovecot: Oct 10 09:14:15 Info: pop3-login: Disconnected: Inactivity (auth failed, 1 attempts): method=PLAIN, rip=199.30.31.48, lip=199.30.26.18 5. Then the request queue is full ... Dovecot is completely inactive. Of course it try to fail back to pam but as the password is not the same so it's failed also. dovecot: Oct 10 09:38:53 Error: auth(default): ldap(user1,10.0.0.7): Request queue is full (oldest added 1660 secs ago) dovecot: Oct 10 09:38:53 Info: auth-worker(default): pam(user1,10.0.0.7): lookup service=dovecot dovecot: Oct 10 09:38:53 Info: auth-worker(default): pam(user1.vn,10.0.0.7): #1/1 style=1 msg=Password: dovecot: Oct 10 09:38:53 Info: auth(default): new auth connection: pid=22405 dovecot: Oct 10 09:38:54 Info: auth(default): client in: AUTH 1 PLAIN service=pop3 lip= x.x.x.x rip= x.x.x.x lport=110 rport=2789 resp=<hidden> dovecot: Oct 10 09:38:56 Info: auth-worker(default): pam(user1,x.x.x.x): pam_authenticate() failed: Authentication failure (password mismatch?) ---------------------------------------------------------------- Bref, I suggest that when the connection between LDAP and dovecot is dropped, the connection from user is still there and as they don't receive a result from dovecot [Fail or Success]... And it still "pending" somehow to wait a response from dovecot. But when ldap is connected to the system, these pending connection (from user) is still pending .... so it makes the "request queue is full". Isn't it? Should I do something to work-through or work-around this problem? May I did something wrong in my configuration. Below is usual information may it helps us analyze the problem! Thanks many much for your help! ----------------------------------------------------------------- [root ~]# dovecot -n # 1.1.14: /etc/dovecot.conf # OS: Linux 2.6.18-92.el5PAE i686 CentOS release 5.2 (Final) ext3 log_path: /var/log/dovecot.log protocols: imap pop3 ssl_disable: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login verbose_proctitle: yes mail_gid: 100 mail_location: maildir:/home/%u/Maildir mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: verbose: yes debug: yes passdb: driver: ldap args: /etc/dovecot-ldap.conf passdb: driver: pam userdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: static socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: dovecot group: dovecot plugin: sieve: /home/%u/.dovecot.sieve -------------------------------------------------------------------- [root ~]# grep -v '^ *$#.*$\?$' /etc/dovecot-ldap.conf hosts = ldap.tma.com.vn dn = ##### dnpass = ###### auth_bind = yes auth_bind_userdn = uid=%u,ou=Users,dc=tma,dc=com,dc=vn ldap_version = 3 base = ou=Users,dc=,dc=com,dc=vn scope = subtree user_attrs = uid=uid,mailQuota=quota_rule=*:storage=%$M user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=posixAccount)(uid=%u)) default_pass_scheme = CRYPT -------------------------------------------------------------------- Regards, Thu NGUYEN.

2 2

[Dovecot] 2.0 config info for dovecot-dict-sql.conf?
by PGNet Dev 16 Oct '09

16 Oct '09

reading, /usr/local/share/doc/dovecot/wiki/Quota.Dict.txt refers to config, e.g. dovecot-dict-sql.conf, for, "v1.2 +" is the v1.2+ info there valid/correct for 2.0+?

1 1

[Dovecot] @2.0, Fatal error (Expecting '=') in trash plugin config
by PGNet Dev 16 Oct '09

16 Oct '09

i've setup trash plugin as, grep trash imap.conf mail_plugins = autocreate fts fts_squat fts_solr imap_quota quota trash zlib cat plugin.conf plugin { ... trash = /data/mail/Conf/dovecot/conf.d/trash.conf } cat /data/mail/Conf/dovecot/conf.d/trash.conf 1 Spam 2 Trash 3 Sent 3 Sent Messages but, @ dovecot -n # 2.0.alpha1: /data/mail/Conf/dovecot/dovecot.conf doveconf: Fatal: Error in configuration file /data/mail/Conf/dovecot/conf.d/trash.conf line 1: Expecting '=' bug, or change frp, v1.x in config/parsing?

2 4

[Dovecot] pop3-login process
by ogu_yo＠yahoo.co.jp 16 Oct '09

16 Oct '09

Hi, I would like to know if the pop3-login process would be create more than one while a user connection is established. http://wiki.dovecot.org/RunningDovecot ------------------------------------ imap-login and pop3-login processes handle new IMAP and POP3 connections until user has logged in. ------------------------------------ I'm sorry to ask you this kind of question... Regards, -------------------------------------- GyaO! - Anime, Dramas, Movies, and Music videos [FREE] http://pr.mail.yahoo.co.jp/gyao/

3 7

[Dovecot] Expire plugin: wrong mailbox separators in database?
by Andreas Ntaflos 16 Oct '09

16 Oct '09

Hi all, I'm experimenting with the expire plugin and seem have run into a small problem. I am using Dovecot 1.2.4 on a test server. The config is taken mostly verbatim from the expire plugin wiki page [1], using MySQL as a database. See below for detailed output. Namespace "private" has "/" configured as mailbox separator: namespace private { separator = / prefix = inbox = yes } The "expire =" section from dovecot.conf thus looks like this: plugin { expire = Trash 7 INBOX/Spam 8 INBOX/Spam/To-Discard 3 ... } Three mailboxes/folders are kept track of: Trash, INBOX/Spam and INBOX/Spam/Spam-To-Discard (this one holds messages that scored high enough to very unlikely be legitimate and should be deleted soon). But when a message is put into one of these folders the mailbox attribute of the expires table uses "." as mailbox separator: mysql> select * from expires; +-----------------+----------------------------+--------------+ | username | mailbox | expire_stamp | +-----------------+----------------------------+--------------+ | foo(a)example.org | INBOX.Spam.Spam-To-Discard | 1253114526 | | foo(a)example.org | INBOX.Spam | 1253114528 | +-----------------+----------------------------+--------------+ Consequently, expire-tool --test seems to choke on this: # dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool --test Info: foo(a)example.org/INBOX.Spam.Spam-To-Discard: \ mailbox 'INBOX.Spam.Spam-To-Discard' removed from config Info: foo(a)example.org/INBOX.Spam: mailbox 'INBOX.Spam' \ removed from config When I manually update the mailbox attribute to use "/" as separator expire-tool seems to work correctly: # dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool --test Info: foo(a)example.org/INBOX/Spam/Spam-To-Discard: stop, expire \ time in future: Wed Sep 16 17:22:06 2009 Using "." as separator in the "expire =" line doesn't work either: the expires table isn't written to at all when a message is put in one of the specified folders. Presumably because INBOX/Spam is the real mailbox but INBOX.Spam is monitored by the expire plugin and there is no INBOX.Spam to put in messages. So I believe this is not the expected behaviour? Or am I doing anything wrong? I'd rather not change the separator from "/" to "." in all the namespaces if that can be avoided. Thanks in advance, Andreas dovecot -n: ========== # 1.2.4: /usr/local/etc/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.2 log_timestamp: %Y-%m-%d %H:%M:%S protocols: managesieve imap imaps pop3 pop3s listen: 83.65.168.220 127.0.0.1 login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login mail_access_groups: mail mail_privileged_group: mail mail_location: maildir:~/Maildir mail_drop_priv_before_exec: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_plugins(default): autocreate acl expire mail_plugins(imap): autocreate acl expire mail_plugins(pop3): expire mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve namespace: type: public separator: / prefix: Public/ location: maildir:/var/mail/public:CONTROL=~/Maildir/control/public:INDEX=~/Maildir/index/public list: yes namespace: type: private separator: / prefix: Backup/ location: maildir:~/Maildir-backup hidden: yes list: no namespace: type: private separator: / inbox: yes list: yes subscriptions: yes lda: log_path: info_log_path: auth_socket_path: /var/run/dovecot/auth-master postmaster_address: postmaster(a)mailtest0.rise-s.com mail_plugins: sieve acl expire auth default: mechanisms: plain login passdb: driver: pam passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=vmail gid=vmail home=/var/vmail/%Ld/%Ln allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail plugin: expire: Trash 7 INBOX/Spam 5 INBOX/Spam/Spam-To-Discard 3 expire_dict: proxy::expire sieve: ~/.dovecot.sieve sieve_dir: ~/sieve sieve_global_path: /etc/dovecot/sieve/default.sieve sieve_global_dir: /etc/dovecot/sieve/global/ sieve_before: /etc/dovecot/sieve/before/ autocreate: Trash autocreate2: Drafts autocreate3: Sent autocreate4: INBOX/Spam autocreate5: INBOX/Spam/Spam-To-Discard autosubscribe: Trash autosubscribe2: Drafts autosubscribe3: Sent autosubscribe4: INBOX/Spam autosubscribe5: INBOX/Spam/Spam-To-Discard acl: vfile:/etc/dovecot/acl dict: expire: mysql:/etc/dovecot/dovecot-dict-expire.conf /etc/dovecot/dovecot-dict-expire.conf: ===================================== connect = host=127.0.0.1 dbname=mailserver user=mailuser password=xxx map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } The expires table: CREATE TABLE expires ( username varchar(100) not null, mailbox varchar(255) not null, expire_stamp integer not null, primary key (username, mailbox) ); [1] http://wiki.dovecot.org/Plugins/Expire -- Andreas Ntaflos Vienna, Austria GPG Fingerprint: 6234 2E8E 5C81 C6CB E5EC 7E65 397C E2A8 090C A9B4

3 3

[Dovecot] Error (IMHO) with --with-doc option
by Jacek Osiecki 16 Oct '09

16 Oct '09

Hi, I was trying to create complete rpm package for my system, containing dovecot 1.2.5 intregrated with dovecot-sieve and dovecot-managesieve. Finally I succeeded and it works great, but I found something that might be treated as wrong behaviour... When you run ./configure --with-docs=no, Makefile does not build docs anymore, but... installs them anyway :) It caused some troubles because rpmbuild complained about documents moved to <buildroot>/usr/share/doc/dovecot I have created a small patch that fixes this - hope it doesn't introduce any mess: diff -Nur 2/Makefile.in 1/Makefile.in --- 2/Makefile.in 2009-09-29 00:17:22.000000000 +0200 +++ 1/Makefile.in 2009-09-29 00:17:38.000000000 +0200 @@ -75,7 +75,7 @@ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags -DIST_SUBDIRS = src doc +DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) Best regards, -- Jacek Osiecki joshua(a)ceti.pl GG:3828944 I don't want something I need. I want something I want.

2 1

[Dovecot] Questions regarding dbox migration
by Mikkel 16 Oct '09

16 Oct '09

It has been my wish to move to dbox for a long time hoping to reduce the number of writes which is really killing us. Now I wonder what may be the best way of doing so. I'm considering some sort of intermediate migration where the existing Maildir users are changed to single-dbox and then later upgraded to 2.0 and changed to multi-dbox when it becomes stable. But is this a reasonable task to perform on a production system or at all? The alternative is to wait for 2.0 to become completely stable and then go all the way at once. I would however much prefer to take it one step at a time and I think it would be safer to start out with single-dbox as it appears less complex. Now the big question is whether multi-dbox and single-dbox are compatible formats. If a Maildir->dbox migration is made on a system running dovecot v. 1.1, would it then be trivial later changing to multi-dbox after upgrading to 2.0 or is a completely new migration then needed? Would this scenario be much different if the system is upgraded to version 1.2 before the change to single-dbox? Kind regards, Mikkel

5 31

[Dovecot] master:Error @2.0 TLS login, "Too large auth data_size sent"
by PGNet Dev 16 Oct '09

16 Oct '09

fyi, hg log | head -n 7 | grep changeset changeset: 10074:1d2d55d9779e @ LOGIN via Tbird ... Oct 15 11:22:35 master: Error: service(imap-login): Too large auth data_size sent Oct 15 11:22:35 imap-login: Info: Disconnected: Shutting down (auth failed, 1 attempts): user=<blakers(a)mx.pgnetwork.net>, method=PLAIN, rip=192.168.1.4, lip=192.168.1.14, TLS

4 16

[Dovecot] dovecot 1.2.6 fails to build with openssl < 0.9.8
by Paul Howarth 16 Oct '09

16 Oct '09

The update of ssl_proxy_get_security_string() in dovecot 1.2.6 has broken compatibility with openssl < 0.9.8 (e.g. on RHEL4) because the functions SSL_COMP_get_name and SSL_get_current_compression don't exist until openssl 0.9.8 (build fails at link time due to these symbols being unresolved). I've worked around this by reverting the function to the 1.2.5 version for now but I think a better solution would be to have a configure test for these functions and only include the SSL compression details when they're available. Cheers, Paul.

3 4

[Dovecot] is it possible to fetch messages for multiple users using a single account?
by Tony Smith 16 Oct '09

16 Oct '09

Dear list, I am running dovecot with LDAP. Each account has email in form abc(a)example.com, and messages are stored at /var/vmail/abc/Maildir. This is an external mail server, and I would like to use a cron job to fetch all messages to an internal server which has slow internet connection. It seems getmail supports multidrop retriever which might fit the bill. However I could not figure out how to set up an account that can be used to fetch all messages for all virtual accounts. Is it possible at all? thanks, Tony PS: here is my config: # dovecot -n # 1.1.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-openvz-amd64 i686 Debian 5.0.3 log_path: /var/log/dovecot.log protocols: pop3 pop3s imap imaps managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): 127.0.0.1:2000 ssl_cert_file: /etc/ssl/certs/cert.pem ssl_key_file: /etc/ssl/private/key.pem disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_uid: 1000 mail_gid: 1000 mail_location: maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/ mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota imap_quota zlib mail_plugins(imap): quota imap_quota zlib mail_plugins(pop3): quota zlib mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): sieve_storage(default): sieve_storage(imap): sieve_storage(pop3): sieve_storage(managesieve): /var/vmail/sieve/%Ld/%Ln/ sieve(default): sieve(imap): sieve(pop3): sieve(managesieve): dovecot.sieve auth default: mechanisms: plain login default_realm: river-valley.com user: vmail passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/dovecot-auth mode: 438 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 438 user: vmail group: vmail plugin: quota_warning: storage=85%% /usr/bin/dovecot-quota-warning.sh 85 quota_warning2: storage=90%% /usr/bin/dovecot-quota-warning.sh 90 quota_warning3: storage=95%% /usr/bin/dovecot-quota-warning.sh 95 quota: maildir quota_rule: *:storage=100M expire: Trash 7 Trash/* 7 Junk 30 expire_dict: proxy::expire auth_socket_path: /var/run/dovecot/auth-master dict: expire: db:/var/lib/dovecot/expire/expire.db

2 2

Re: [Dovecot] 1.2.6 Spurious pread()/stream errors/index corruption
by Paul Freeman 16 Oct '09

16 Oct '09

OK I'm still getting the same errors, so just as a test I tried the same process on an x86_32 build host, it's binaries now give a different error, one which I have also seen mentioned before I think: ---- banshee-x86-32 / # /NOC4/dovecot/sbin/dovecot -F Error: Missing auth section for server default Fatal: Invalid configuration in /NOC4/etc/dovecot/dovecot.conf ----- I do notice this though, with x86_64 binaries strace shows calls to pread() with x86_32 binaries strace shows calls to pread64() this looks round the wrong way? hmm in both builds file offset bits is 64, with config.h: ---- config.h check... /* Define to 1 if you have the `pread' function. */ /* Defint if pread/pwrite implementation is broken */ #define PREAD_BROKEN 1 /* Define if pread/pwrite needs _XOPEN_SOURCE 500 */ On Thu, 15 Oct 2009 15:33:47 -0400, Timo Sirainen <tss(a)iki.fi> wrote: > On Thu, 2009-10-15 at 20:30 +0100, Paul Freeman wrote: >> banshee-x86-64 dovecot-1.2.6 # grep -i pread config.h >> /* Define to 1 if you have the `pread' function. */ >> /* #undef HAVE_PREAD */ >> /* Defint if pread/pwrite implementation is broken */ >> /* #undef PREAD_BROKEN */ >> /* Define if pread/pwrite needs _XOPEN_SOURCE 500 */ >> #define PREAD_WRAPPERS /**/ >> >> i'll give PREAD_BROKEN a try now > > And remove PREAD_WRAPPERS if that doesn't work. It shouldn't matter > though.

2 5

[Dovecot] virtual Folder Plugin with "." Separator: [NONEXISTENT] Mailbox doesn't exist
by Elmar Weber 16 Oct '09

16 Oct '09

Hello, I've switched from courier-imap to dovecot to benefit from the virtual folder feature. I'm using dovecot 1.2.6 on Gentoo Linux. However, I', getting the message "[NONEXISTENT] Mailbox doesn't exist: <name>" from Thunderbird when I try to access any virtual folder. The relevant setup: mail_location = maildir:~/.maildir namespace private { separator = . inbox = yes hidden = yes list = yes } namespace private { prefix = virtual. separator = . location = virtual:~/.maildir/.virtual } I then created the folders ~user/.maildir/.virtual and ~user/.maildir/.virtual.test and placed a file in .virtual.test with the contents ====== * all ====== After a dovecot restart I'm getting the error message: "[NONEXISTENT] Mailbox doesn't exist: test" Where did I make the mistake in the configuration? Is the "." path separator a problem case? ciao, Elmar

2 2

[Dovecot] Missing folders
by John Moorhouse 16 Oct '09

16 Oct '09

I've recently had a oops with the system I was running dovecot on so have had to move it to a new machine, I've been able to retrieve the mbox files from the old machine, built the new machine and over wrote the new mbox files with the old one in maildir, connecting to the server via imap woeks but I can only see the mail in the inbox from the old mbox files, emails in sub directories (the sub directories arn't there), is there some command I need to run to get it to pass the mbox file to find the folders or it there another file I need to transfer form the old machine. (I'm assuming that all the emails for a user, including those in subfolders are within the single mbox file, particularly as I'm is very large) Thanks John

2 1

[Dovecot] Problem with mbox and quota with 1.2 version
by Ντελάκης Δημήτριος 16 Oct '09

16 Oct '09

Hello list, I am new with dovecot and i am trying to setup a simple mbox with quotas setup. Here is my configuration. dovecot -c /etc/dovecot.conf -n # 1.2.6: /etc/dovecot.conf # OS: Linux 2.6.21 i686 Fedora Core release 6 (Zod) ext3 log_path: /var/log/mail/dovecot protocols: imap pop3 ssl: no disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login mail_access_groups: mail mail_privileged_group: mail mail_location: mbox:/var/spool/mail:INBOX=/var/spool/mail/%u:INDEX=/var/spool/indexes/%u mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 lda: postmaster_address: postmaster(a)example.com auth default: passdb: driver: pam userdb: driver: passwd plugin: quota_warning: storage=5%% /usr/local/bin/quota-warning.sh 95 quota: dirsize:user quota_rule: ?:storage=10M I still my mbox fills with e-mail >10M Do i missing something? Thanks! --

3 2

[Dovecot] Dovecot lock problem
by Simon Gao 16 Oct '09

16 Oct '09

Hi, We have a few users experiencing locking problem. When starting Thunderbird, there is no new emails in Inbox. Dovecot createa a lock file /var/spool/mail/<user>.lock. It never completes openning Inbox. If closing the mail client, the open imap session does not get closed, nor the lock file get deleted. Here are the errors in log: dovecot: Oct 13 11:18:35 Warning: IMAP(user1): Our dotlock file /var/mail/user1.lock was deleted (kept it 88 secs) dovecot: Oct 13 11:18:35 Error: IMAP(user1): file_dotlock_delete() failed with mbox file /var/mail/user1: No such file or directory We are running Dovecot 1.1.2. Any pointer to resolve this problem is appreciated. Simon

2 1

[Dovecot] MailDIR and expire plugin
by Jerry 16 Oct '09

16 Oct '09

All of the mailboxes on this system are in MailDIR format. None of the users delete mail off of the server after POPing their accounts. This is the present setting: expire = Trash 7 Spam 30 expire_dict = proxy::expire Is that correct for MailDIR style mailboxes? It doesn't appear correct; however, I have not been able to find any specific documentation on expire with MailDIR style mailboxes. I am assuming that the expire plugin will work since IMAP has not been implemented on this server. -- Jerry |::::======= gesbbb(a)yahoo.com |::::======= |=========== |=========== | QOTD: "Wouldn't it be wonderful if real life supported control-Z?"

2 6

[Dovecot] Another 1.2.5 imap panic
by Chris Wakelin 16 Oct '09

16 Oct '09

We've had another random imap process crash. This is with the original 1.2.5 imap (I haven't applied the patch for two processes creating an index simultaneously): > Oct 03 13:24:56 imap-login: Info: Login: user=<xxxxxxxx>, method=PLAIN, rip=134.225.1.46, lip=134.225.16.6 > Oct 03 13:25:59 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=483, msgid=<xxxxxxxx> > Oct 03 13:28:06 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: expunge: uid=483, msgid=<xxxxxxxx>, size=63593 > Oct 03 13:28:30 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=482, msgid=<xxxxxxxx> > Oct 03 13:28:30 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=484, msgid=<xxxxxxxx> > Oct 03 13:28:30 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=485, msgid=<xxxxxxxx> > Oct 03 13:28:42 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: undelete: uid=485, msgid=<xxxxxxxx> > Oct 03 13:28:51 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=486, msgid=<xxxxxxxx> > Oct 03 13:28:54 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: expunge: uid=482, msgid=<xxxxxxxx>, size=273185 > Oct 03 13:28:54 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: expunge: uid=484, msgid=<xxxxxxxx>, size=12740 > Oct 03 13:28:54 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: expunge: uid=486, msgid=<xxxxxxxx>, size=52154 > Oct 03 13:30:22 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=470, msgid=<xxxxxxxx> > Oct 03 13:30:36 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=471, msgid=<xxxxxxxx> > Oct 03 13:30:50 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=472, msgid=<xxxxxxxx> > Oct 03 13:33:27 IMAP 6067 xxxxxxxx 134.225.1.46 : Info: delete: uid=475, msgid=<xxxxxxxx> > Oct 03 13:34:20 IMAP 6067 xxxxxxxx 134.225.1.46 : Panic: file istream-raw-mbox.c: line 578 (istream_raw_mbox_get_body_size): assertion failed: (rstream->body_offset != (uoff_t)-1) Backtrace: > Core was generated by `imap [xxxxxxxx 134.225.1.46]'. > Program terminated with signal 6, Abort. > #0 0xff21fe78 in ?? () > (gdb) bt > #0 0xff21fe78 in ?? () > #1 0xbe258 in ?? () > #2 0xbeb14 in ?? () > #3 0xbe414 in ?? () > #4 0x5a238 in mail_index_update_flags (t=0xe29b8, seq=578, modify_type=37, > flags=928984) at mail-index-transaction.c:697 > #5 0x5a4d8 in mail_index_ext_resize (t=0x12a250, ext_id=4294967295, > hdr_size=1221160, record_size=64549, record_align=0) > at ../../src/lib/array.h:157 > #6 0x5a7a0 in mail_index_update_ext (t=0x0, seq=0, ext_id=523301, > data=0xffbeeb38, old_data_r=0x22094) at ../../src/lib/array.h:187 > #7 0x5ae58 in _tview_close (view=0x1272a8) at mail-index-transaction-view.c:24 > #8 0x5c7d8 in mail_index_sync_end (_ctx=0xffffffff) at mail-index-sync.c:636 > #9 0x5cd74 in mail_index_sync_update_log_offset (ctx=0x12be80, map=0x11, > eol=140) at mail-index-sync-update.c:59 > #10 0x5cea4 in mail_index_map_msync (index=0x130d08, map=0x0) > at mail-index-sync-update.c:72 > #11 0x79354 in t_pop () at data-stack.c:160 > #12 0x6a95c in mailbox_save_init () at mail-storage.c:526 > #13 0x5ced0 in mail_index_map_msync (index=0x1296c0, map=0x11) > at mail-index-sync-update.c:75 > #14 0x79038 in buffer_get_size () at buffer.c:293 (see http://www.dovecot.org/list/dovecot/2009-September/043126.html for "dovecot -n" output etc.) BTW there's been no crashes of imap-login since the last patch for literals in login parameters :) Best Wishes, Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 4

[Dovecot] Dovecot 1.2.6 segfault in imap_fetch_begin
by Brandon Davidson 16 Oct '09

16 Oct '09

We recently upgraded from Dovecot 1.2.4 to 1.2.6 (with the sieve patches of course). Everything has been running quite well since the upgrade. The occasional issue with assert-crashing when expunging has gone away. However, one of our users seems to have triggered a new issue. She's been the only one to see it, but whenever she logs in, her imap process segfaults immediately. It appears that the crash is a null pointer deref in the array library, but I'm not sure what code is at fault for calling in without checking array validity... or even if I'm on the right track. Backtraces and some further information are available here. Cores available on request. http://uoregon.edu/~brandond/dovecot-1.2.6/bt.txt Thanks, -Brad

2 6

[Dovecot] @2.0 IMAP login, Error: ...//lib20_fts_plugin.so: undefined symbol: fts_next_hook_mailbox_allocated
by PGNet Dev 15 Oct '09

15 Oct '09

hi, @ imap login to 2.0/head, Oct 12 21:06:53 master: Info: Dovecot v2.0.alpha1 starting up (core dumps disabled) Oct 12 21:07:16 imap-login: Info: Login: user=<testuser(a)my.domain.com>, method=PLAIN, rip=192.168.1.100, lip=192.168.1.101, TLS Oct 12 21:07:16 IMAP(testuser(a)my.domain.com): Info: Loading modules from directory: /usr/local/lib/dovecot Oct 12 21:07:16 IMAP(testuser(a)my.domain.com): Info: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so Oct 12 21:07:16 IMAP(testuser(a)my.domain.com): Info: Module loaded: /usr/local/lib/dovecot/lib11_imap_quota_plugin.so Oct 12 21:07:16 IMAP(testuser(a)my.domain.com): Info: Module loaded: /usr/local/lib/dovecot/lib20_autocreate_plugin.so Oct 12 21:07:16 IMAP(testuser(a)my.domain.com): Error: dlopen(/usr/local/lib/dovecot/lib20_fts_plugin.so) failed: /usr/local/lib/dovecot/lib20_fts_plugin.so: undefined symbol: fts_next_hook_mailbox_allocated Oct 12 21:07:16 IMAP(testuser(a)my.domain.com): Fatal: Couldn't load required plugins also, after install, i note, cd /usr/local/lib ls dovecot/{imap,lda,pop3} dovecot/imap: lib15_notify_plugin.so dovecot/lda: lib15_notify_plugin.so lib90_sieve_plugin.a lib90_sieve_plugin.la lib90_sieve_plugin.so dovecot/pop3: lib15_notify_plugin.so shouldn't, e.g., dovecot/imap have auto-populated symlinks to autocreate, fts, etc plugins? or for 2.0 do they need to be manually created? thx.

2 2

[Dovecot] 1.2.6 Spurious pread()/stream errors/index corruption
by Paul Freeman 15 Oct '09

15 Oct '09

Hi, We're currently testing 1.2.x with a move from 1.1.x in mind however with the current 1.2 series we are encountering some serious problems. simply editing the main conf and restarting dovecot gives these errors seemingly randomly: (some previous posts indicated this might be todo with 64bit file offsets so we've played around with disable-largefile and setting _FILE_OFFSET_BITS manually but without any success) ---- error while reading main dovecot conf file Unexpected eof found when reading file 'UNOPENED' (Errcode: -1) Panic: file istream-file.c: line 80 (i_stream_file_read): assertion failed: (errno != 0) Error: Raw backtrace: /NOC4/dovecot/sbin/dovecot [0x41ad42] -> /NOC4/dovecot/sbin/dovecot(default_fatal_handler+0x34) [0x41ae54] -> /NOC4/dovecot/sbin/dovecot [0x41a486] -> /NOC4/dovecot/sbin/dovecot [0x41d9b0] -> /NOC4/dovecot/sbin/dovecot(i_stream_read+0x4c) [0x41cbbc] -> /NOC4/dovecot/sbin/dovecot(i_stream_read_next_line+0x28) [0x41d408] -> /NOC4/dovecot/sbin/dovecot(settings_read+0x129) [0x4174d9] -> /NOC4/dovecot/sbin/dovecot(master_settings_read+0x89) [0x4155a9] -> /NOC4/dovecot/sbin/dovecot(main+0x1d2) [0x413162] -> /lib/libc.so.6(__libc_start_main+0xe6) [0x2b6b8258c5c6] -> /NOC4/dovecot/sbin/dovecot [0x40aec9] ---- when we do get past this error it surfaces again inside the imap process: Oct 15 09:40:25 10.0.1.2 dovecot: Dovecot v1.2.6 starting up (core dumps disabled) Oct 15 09:40:25 10.0.1.2 dovecot: auth-worker(default): mysql: Connected to x.x.x.x (Services) Oct 15 09:40:38 10.0.1.2 dovecot: imap-login: Login: user=<paul(a)noc4.net>, method=PLAIN, rip=192.168.167.4, lip=10.0.1.2 Oct 15 09:40:38 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Effective uid=512, gid=512, home=/nmail/noc4/cache Oct 15 09:40:38 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): maildir: data=~/ Oct 15 09:40:38 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): maildir++: root=/nmail/noc4/cache, index=, control=, inbox=/nmail/noc4/cache Oct 15 09:40:38 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Namespace : Using permissions from /nmail/noc4/cache: mode=0700 gid=-1 Oct 15 09:40:38 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Corrupted transaction log file /nmail/noc4/cache/dovecot.index.log seq 2: unexpected end of file while reading header (sync_offset=0) Oct 15 09:40:59 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Unexpected eof found when reading file 'UNOPENED' (Errcode: -1) Oct 15 09:40:59 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): pread() failed with file /nmail/noc4/cache/dovecot.index.log: Success Oct 15 09:40:59 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Unexpected eof found when reading file 'UNOPENED' (Errcode: -1) Oct 15 09:40:59 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): pread() failed with file /nmail/noc4/cache/dovecot.index.log: Success Oct 15 09:40:59 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Unexpected eof found when reading file 'UNOPENED' (Errcode: -1) Oct 15 09:40:59 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): pread() failed with file /nmail/noc4/cache/dovecot.index.log: Success Oct 15 09:43:18 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Server shutting down bytes=11746/855 ---- test with different INDEX location Oct 15 09:43:20 10.0.1.2 dovecot: Dovecot v1.2.6 starting up (core dumps disabled) Oct 15 09:43:20 10.0.1.2 dovecot: auth-worker(default): mysql: Connected to x.x.x.x (Services) Oct 15 09:43:30 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Effective uid=512, gid=512, home=/nmail/noc4/cache Oct 15 09:43:30 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): maildir: data=~/:INDEX=/nmail/.Indexes/paul@noc4.net Oct 15 09:43:30 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): maildir++: root=/nmail/noc4/cache, index=/nmail/.Indexes/paul(a)noc4.net, control=, inbox=/nmail/noc4/cache Oct 15 09:43:30 10.0.1.2 dovecot: imap-login: Login: user=<paul(a)noc4.net>, method=PLAIN, rip=192.168.167.4, lip=10.0.1.2 Oct 15 09:43:30 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Namespace : Using permissions from /nmail/noc4/cache: mode=0700 gid=-1 Oct 15 09:43:30 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Unexpected eof found when reading file 'UNOPENED' (Errcode: -1) Oct 15 09:43:30 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Panic: file istream-file.c: line 80 (i_stream_file_read): assertion failed: (errno != 0) Oct 15 09:43:31 10.0.1.2 dovecot: IMAP(paul(a)noc4.net): Raw backtrace: imap [0x4a6642] -> imap [0x4a66c3] -> imap [0x4a5d86] -> imap [0x4ace20] -> imap(i_stream_read+0x4c) [0x4ab0dc] -> imap(i_stream_read_next_line+0x28) [0x4ab928] -> imap(maildir_uidlist_refresh+0x183) [0x443b23] -> imap [0x440d28] -> imap(maildir_storage_sync_init+0x148) [0x441208] -> imap(mailbox_sync+0x30) [0x46ce00] -> imap(cmd_select_full+0x383) [0x4210e3] -> imap [0x42392c] -> imap [0x4239ce] -> imap(client_handle_input+0x45) [0x423b95] -> imap(client_input+0x5f) [0x42458f] -> imap(io_loop_handler_run+0xcb) [0x4ae6cb] -> imap(io_loop_run+0x18) [0x4adb48] -> imap(main+0x537) [0x42c587] -> /lib/libc.so.6(__libc_start_main+0xe6) [0x2b5edbbdb5c6] -> imap [0x41c699] Oct 15 09:43:31 10.0.1.2 dovecot: dovecot: child 30298 (imap) killed with signal 6 (core dumps disabled) ---- our build & test host is Using built-in specs. Target: x86_64-pc-linux-gnu Configured with: /var/tmp/portage/sys-devel/gcc-4.3.2-r3/work/gcc-4.3.2/configure --prefix=/usr --bindir=/usr/x86_64-pc-linux-gnu/gcc-bin/4.3.2 --includedir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.3.2/include --datadir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.3.2 --mandir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.3.2/man --infodir=/usr/share/gcc-data/x86_64-pc-linux-gnu/4.3.2/info --with-gxx-include-dir=/usr/lib/gcc/x86_64-pc-linux-gnu/4.3.2/include/g++-v4 --host=x86_64-pc-linux-gnu --build=x86_64-pc-linux-gnu --disable-altivec --disable-fixed-point --enable-nls --without-included-gettext --with-system-zlib --disable-checking --disable-werror --enable-secureplt --enable-multilib --enable-libmudflap --disable-libssp --enable-libgomp --disable-libgcj --enable-languages=c,c++,treelang,fortran --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --with-bugurl=http://bugs.gentoo.org/ --with-pkgversion='Gentoo 4.3.2-r3 p1.6, pie-10.1.5' Thread model: posix gcc version 4.3.2 (Gentoo 4.3.2-r3 p1.6, pie-10.1.5) any input graciously accepted Regards Paul

2 3

[Dovecot] Deliver - can't connect to .../auth-master
by iain＠brightbooks.co.uk 15 Oct '09

15 Oct '09

Dovecot version 1.1.11 Hi all, I'm having real trouble getting Getmail, which is configured to pick up mail from my ISPs mailhost, to put the mail in our local Maildirs, through Deliver. We're using virtual users so, if I am understanding correctly, Deliver needs to fetch this information from /var/run/dovecot/auth-master. The trouble is that Deliver doesn't seem to have the correct privileges to do so. Whenever Getmail tries to pass the mail to Deliver, the line: Oct 15 15:21:04 Domain deliver(user(a)domain.com): Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory appears in the Mail.err log. So far I've tried: # - Changing the privileges of the whole /var/run/dovecot/ folder, and its sub folders. I understand that this is only a workaround, as Dovecot changes the privileges back on restart, however it doesn't seem to work anyway. It changes the log result from 'No such file or directory' to 'Permission denied' (and sometimes 'Connection refused'). # - I tried setting the location of auth-master to /home/manager/dovecot in the dovecot-postfix.conf config files (and the dovecot.conf config, just in case), so I could control access to it, and its permissions, more closely. Again, no luck. The log file still shows that it is trying to access it through /var/run/dovecot ~ not sure why (I even went to the lengths of doing a search for /var/run/dovecot in the config files, to make sure I hadn't missed a rogue mention; nothing). Interestingly the file auth-master is created in the correct folder I've configured, but the log results still stay the same. Thanks in advance for any help getting this up and running.

2 1

[Dovecot] Two passwords: One for Dovecot IMAP and One for Dovecot SASL? Is it possible?
by Art Gray - Razorpoint 15 Oct '09

15 Oct '09

Greetings, Can Dovecot can handle separate authentication for receiving mail (IMAPS) and sending mail (SMTPS)? In the past, we used Dovecot IMAP for the receiving part and Cyrus SASL for the sending part. This allowed us to use two passwords with mail. Cyrus has grown too old and isn't useful anymore. Can Dovecot give us this functionality: two passwords, one for IMAP authentication and one for SASL authentication? If so, could you point me in the right direction to get this working? Thanks in advance, A

4 3

[Dovecot] ldap quota dovecot
by Justinas Samas 15 Oct '09

15 Oct '09

hi, I've used dovecot 1.1.16 but after upgrade to dovecot 1.2.4 per-user ldap quotas stoped working. My configuration: # 1.2.4: /etc/dovecot.conf # OS: Linux 2.6.18-128.7.1.el5xen x86_64 CentOS release 5.3 (Final) ext3 protocols: imap imaps pop3 pop3s managesieve listen(default): *, [::] listen(imap): *, [::] listen(pop3): *, [::] listen(managesieve): *:20000 login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_executable(managesieve): /usr/libexec/dovecot/managesieve-login login_greeting: Server ready. login_process_per_connection: no verbose_proctitle: yes first_valid_uid: 1 first_valid_gid: 90 last_valid_gid: 400 mail_privileged_group: mail mail_location: maildir:/home/%u/Maildir:INDEX=MEMORY:CONTROL=/conf/no-quotas/control/%u mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_executable(managesieve): /usr/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 mail_plugin_dir(managesieve): /usr/lib64/dovecot/managesieve imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): lda: postmaster_address: postmaster(a)example.com mail_plugins: quota sieve auth_socket_path: /var/run/dovecot/auth-master auth default: debug: yes passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot-ldap.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 511 plugin: quota: maildir trash: /etc/dovecot-trash.conf sieve: ~/.dovecot.sieve sieve_dir: ~/sieve sieve_extensions: +imapflags +notify dovecot-ldap.conf: hosts = ldap.example.com auth_bind = yes base = ou=people, dc=example, dc=com scope = subtree user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,telephoneNumber=quota_rule=*:storage=%$M user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=posixAccount)(uid=%u)(!(shadowExpire=*))) default_pass_scheme = CRYPT Imap shows correct quota, but dovecot lda doesn't reject mail and it gets overquota, maildirsize: 15728640S 28033743 4 If I add for example quota_rule = *:storage=20M to dovecot.conf it works, but I need per-user ldap quotas. It seems dovecot deliver ignores maildirsize.

4 9

[Dovecot] Investigating suspected cache corruption
by David Warden 14 Oct '09

14 Oct '09

Hi All, I'm running Dovecot 1.1.11 for a site of about 7000 active users with a Squirrelmail frontend. We migrated from Courier (big shout to everyone who worked on the wonderful part of the Dovecot wiki that deals with Courier migration) and I have been extremely happy with the performance gains Dovecot has given us. Not only is the IMAP part of Squirrelmail faster, but our same hardware is under far less stress than it was before the migration. To date, the only problem we have experienced is a seemingly random but significant slowdown in Squirrelmail's loading of the messages in a user's Inbox. Each time, I have been able to fix the problem by deleting the user's dovecot.index, dovecot.index.cache and dovecot.index.log files in the user's INDEX directory for their dovecot Inbox. I tried having users experiencing this problem log in to a test Squirrelmail box with mail_debug on, but I didn't see anything out of the ordinary and they report the same slowness on the test server. I don't see anything but normal login/logout IMAP lines in the production dovecot logs. I have hesitated a bit in posting to the list since this seems to be happening to a small percentage of users and it technically may be a problem with Squirrelmail, but the fact that I'm able to fix the problem by nuking Dovecot's index files has me concerned - does anyone have any suggestions for troubleshooting? My first idea when I get another one of these is to do a telnet IMAP session to Dovecot on one of the Squirrelmail boxes and see if I can get it to slow down when retrieving messages from the Inbox. We are using Maildir over NFS with the control/index files stored on NFS as well. We're doing FS quota over NFS using rquotad to query the NFS server for each user's quota. Here's the output of dovecot -n: # 1.1.11: /etc/dovecot.conf Warning: fd limit 1024 is lower than what Dovecot can use under full load (more than 1536). Either grow the limit or change login_max_processes_count and max_mail_processes settings # OS: Linux 2.6.18-128.1.1.0.1.el5 x86_64 Red Hat Enterprise Linux Server release 5.3 (Tikanga) login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_process_per_connection: no login_processes_count: 10 login_max_processes_count: 512 verbose_proctitle: yes first_valid_uid: 0 mail_location: maildir:~/Maildir:CONTROL=/Mail/mailhome/ %u/.dovecot:INDEX=/Mail/mailhome/%u/.dovecot mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mail_drop_priv_before_exec: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): imap_logout_format(default): bytes(in/out)=%i/%o imap_logout_format(imap): bytes(in/out)=%i/%o imap_logout_format(pop3): bytes=%i/%o pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): UID%u-%v pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_logout_format(default): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(imap): top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_logout_format(pop3): top(count/bytes)=%t/%p, retr(count/bytes)=%r/ %b, del(deleted/pre-deleted)=%d/%m, mailbox-size(bytes)=%s namespace: type: private prefix: INBOX. inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd plugin: quota: fs:Mail Quota:user Many thanks, David Warden

2 1

[Dovecot] dovecot + ldap
by bely junior 14 Oct '09

14 Oct '09

Hi, I have a configuration with dovecot authenticating to AD. I would like to authenticate using the user logon name in AD. and mail box were created according to the field mail in AD anyone have any idea about this? my dovecot-ldap: hosts = xx.xx.xx.xx base = dc=domain,dc=com ldap_version = 3 auth_bind = yes auth_bind_userdn = domain\%u thanks. -- Bely Silva Junior

1 0

[Dovecot] dovecot + ldap
by bely junior 14 Oct '09

14 Oct '09

Hi, I have a configuration with dovecot authenticating to AD. I would like to authenticate using the user logon name in AD. and mail box were created according to the field mail in AD anyone have any idea about this? my dovecot-ldap: hosts = xx.xx.xx.xx base = dc=domain,dc=com ldap_version = 3 auth_bind = yes auth_bind_userdn = domain\%u thanks. -- Bely Silva Junior

1 0

[Dovecot] quota error dovecot 1.1.13
by Brightblade 14 Oct '09

14 Oct '09

Hi all, I've troubles with dovecot and quota. Sometimes mails to users are bounced because quota is full. I'm reading quota_rules from LDAP. One "du -h ." from maildir show user is under quota ( at 70 % more or less), less than 99%, i delete maildirsize and dovecot recreate it with ldap-quota value at first line and second line is current-quota mails. Current-quota is near quota max value so dovecot execute quota_warning (99%). Why is dovecot thinking quota is at 99% when du -h show me its value is near 70% ? any guess? My conf: syslog_facility: local1 protocols: imap pop3 managesieve listen(default): * listen(imap): * listen(pop3): *:110 listen(managesieve): *:2000 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/dovecot//var/run/dovecot/login login_executable(default): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/dovecot/libexec/dovecot/managesieve-login login_process_per_connection: no login_process_size: 1200 login_processes_count: 20 login_max_processes_count: 2048 login_max_connections: 512 max_mail_processes: 4096 mail_max_userip_connections(default): 1000 mail_max_userip_connections(imap): 1000 mail_max_userip_connections(pop3): 10 mail_max_userip_connections(managesieve): 10 mail_location: maildir:%h/Maildir mmap_disable: yes dotlock_use_excl: no mail_nfs_storage: yes mail_nfs_index: yes mail_executable(default): /usr/local/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/local/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/dovecot/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/dovecot//lib/dovecot/managesieve imap_client_workarounds(default): outlook-idle imap_client_workarounds(imap): outlook-idle imap_client_workarounds(pop3): imap_client_workarounds(managesieve): sieve(default): sieve(imap): sieve(pop3): sieve(managesieve): ~/.dovecot.sieve auth default: cache_size: 512000 cache_ttl: 1800 executable: /usr/local/dovecot/libexec/dovecot/dovecot-auth failure_delay: 5 debug: yes worker_max_count: 4096 worker_max_request_count: 4096 process_size: 4096 passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 511 plugin: sieve: %h/.dovecot.sieve quota_warning: storage=99%% /usr/local/bin/quota-full.sh %u quota_warning2: storage=95%% /usr/local/bin/quota-warning.sh 95 %u quota_warning3: storage=70%% /usr/local/bin/quota-warning.sh 70 %u quota: maildir thanks in advance, Regards.

3 2

[Dovecot] [Off-Topic] Dovecot and Maildrop
by Darvin Denmian 14 Oct '09

14 Oct '09

Hello, I need to know : What is the best way to use Postfix (Virtual User on Mysql) + Dovecot + Maildrop ? Is there some documentation that you can indicate to me? Thanks !!

2 1

[Dovecot] Some errors with sieve
by Proskurin Kirill 14 Oct '09

14 Oct '09

Hello all. I found some errors in logs like this: Oct 14 05:51:47 IMAP(chief(a)khb.fxclub.org): Error: stat(/var/spool/dovecot/domains/khb.fxclub.org/chief/.dovecot.sieve/tmp) failed: Not a directory Oct 14 06:17:01 IMAP(msa(a)fxclub.org): Error: stat(/var/spool/dovecot/domains/fxclub.org/msa/.dovecot.sieve/tmp) failed: Not a directory Oct 14 06:17:28 IMAP(stolchnev-vk(a)soft-expert.biz): Error: stat(/var/spool/dovecot/domains/soft-expert.biz/stolchnev-vk/.dovecot.sieve/tmp) failed: Not a directory Filter seems to work normal. Dovecot -n: # 1.2.4: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.1-RELEASE-p7 i386 ufs base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-debug.log protocols: imap imaps pop3 pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000 ssl_ca_file: /usr/local/etc/certs/GlobalSignCA.crt ssl_cert_file: /usr/local/etc/certs/fxclub_org.crt ssl_key_file: /usr/local/etc/certs/fxclub_org.key ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_process_size: 128 login_processes_count: 20 login_max_processes_count: 512 mail_max_userip_connections(default): 256 mail_max_userip_connections(imap): 256 mail_max_userip_connections(pop3): 20 mail_max_userip_connections(managesieve): 10 verbose_proctitle: yes first_valid_gid: 0 mail_privileged_group: mail mail_uid: dmail mail_gid: dmail mail_location: maildir:/var/spool/dovecot/domains/%d/%n mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_process_size: 512 mail_plugins(default): quota imap_quota autocreate mail_log mail_plugins(imap): quota imap_quota autocreate mail_log mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve imap_client_workarounds(default): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): lda: postmaster_address: postmaster(a)fxclub.org hostname: mail.fxclub.org mail_plugins: sieve quota mail_plugin_dir: /usr/local/lib/dovecot/lda quota_full_tempfail: yes deliver_log_format: msgid=%m: %$ %f %s log_path: /var/log/dovecot/deliver.log info_log_path: /var/log/dovecot/deliver.log sendmail_path: /usr/sbin/sendmail rejection_reason: Your message to <%t> was automatically rejected:%n%r auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login user: dovecot-auth username_format: %Lu worker_max_count: 100 passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: exim master: path: /var/run/dovecot/auth-master mode: 384 user: dmail plugin: quota: maildir quota_rule: *:storage=1024M quota_rule2: Trash:storage=1256M quota_rule3: SPAM:ignore quota_warning: storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2: storage=80%% /usr/local/bin/quota-warning.sh 80 autocreate: Trash autocreate2: Sent autocreate3: Spam autosubscribe: Trash autosubscribe2: Sent autosubscribe3: Spam sieve_dir: ~/sieve sieve: ~/.dovecot.sieve sieve_global_path: /var/spool/dovecot/global.sieve mail_location: /var/spool/dovecot/domains/%d/%n/ mail_log_events: delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields: uid box msgid size mail_log_max_lines_per_sec: 0 -- С уважением, Проскурин Кирилл +7(495)727-06-26 доб. 1070

3 2

[Dovecot] backup using rsync
by Scott Murman 14 Oct '09

14 Oct '09

i'm trying to backup the dovecot Maildir files over a cifs share. source is a debian build, share is a readynas. i've been getting rsync: mkstemp 'filename goes here' failed: Not a directory (20) errors. rsync is v3.0. i believe this is related to the dovecot file naming convention that includes characters such as ':' in the filename. anyone else seeing similar behavior? a workaround? i can go to different backup strategies, but rsync is cheap and effective for my needs. thanks, -SM-

6 10

[Dovecot] Homedir for sieve/LDAP
by Edgar Fuß 13 Oct '09

13 Oct '09

I'm somewhat confused regarding Home Directories needed by sieve and setting them for an LDAP userdb. We have system users, passdb ldap, userdb ldap, but home directories are not mounted on the mail server. Now apparently, sieve needs the home directory for .dovecot.lda-dupes. Is there an easier way to give lda/sieve a home directory than setting something along the lines of user_attrs = ...,uid=home=/import/mail/%$/home in dovecot-ldap.conf?

3 11

[Dovecot] failing to deliver to one of multiple destinations
by Edgar Fuß 13 Oct '09

13 Oct '09

Is it defined whether, in case a message should be delivered to multiple destinations via a sieve script, and one of those destinations fail, then the whole delivery is to be considered as successful or not? My case: A sieve script forwarding to and external destinations plus local keep. The keep fails (configuration error, wrong homedir, .dovecot.lda- dupes not writable). According to postfix logs, dovecot deliver returned success. The mail was NOT delivered to the local destination and NOT bounced. Is this expected behaviour?

2 3

[Dovecot] docs for anvil?
by PGNet Dev 13 Oct '09

13 Oct '09

are there any docs for anvil config & usage in 2.0? afaict, nothing's mentioned in the wiki ... thx.

3 4

[Dovecot] LAYOUT=fs still uses 'dot' prefixes for folders
by PGNet Dev 13 Oct '09

13 Oct '09

running latest dovecot HEAD, per, http://wiki.dovecot.org/MailLocation/Maildir i've set LAYOUT=fs, dovecot -n| grep -i layout mail_location: maildir:/data/mail:LAYOUT=fs and expect, maildirs to actually use physical directories, such as: * Maildir/folder/ * Maildir/folder/subfolder/ but, autocreate@login creates folders using "dot" prefixes, e.g., cd /data/mail/Domains/my.domain.com/Accounts/test_account ls -1d .* ./ ../ .Drafts/ .Spam/ .Templates/ .Trash/ &, login via TBird, creating a folder "test", also creates .test/ a bug, or a misconfiguration?

3 8

[Dovecot] (no subject)
by Jerry 13 Oct '09

13 Oct '09

Using Postfix with Virtual Users/Virtual Domains, I have configured it with a wild card entry; i.e., "*.mydomain.com" This works fine in Postfix; however, using Dovecot for delivery is causing the message to bounce since Dovecot does not have an entry in the "user passwd" or "userdb" file. I want to store the catch-all addresses in a separate mailbox. Can I use sieve for this or will that fail also? This is the entry in the postfix master.cf file: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${user}@${nexthop} The output of dovecot -n # 1.2.4: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.2-STABLE i386 ufs log_path: /usr/home/gerard/dovecot.log protocols: pop3 pop3s managesieve listen(default): * listen(pop3): * listen(managesieve): localhost:2000 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/pop3-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_greeting: Greetings From Seibercom.net verbose_proctitle: yes first_valid_uid: 1000 first_valid_gid: 1000 mail_privileged_group: mail mail_location: maildir:/var/mail/vhost/%d/%n mail_executable(default): /usr/local/libexec/dovecot/pop3 mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_plugins(default): expire mail_plugins(pop3): expire mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/pop3 mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve pop3_client_workarounds(default): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): dict_db_config: /usr/local/etc/dovecot-db.conf managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(pop3): bytes=%i/%o managesieve_logout_format(managesieve): bytes ( in=%i : out=%o ) lda: postmaster_address: postmaster(a)seibercom.net mail_plugins: expire sieve: /usr/local/etc/dovecot/sieve/gerard.sieve sieve_global_path: /usr/local/etc/dovecot/sieve/gerard.sieve sendmail_path: /usr/sbin/sendmail auth default: mechanisms: plain login cram-md5 digest-md5 username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@+ username_format: %Lu passdb: driver: sql args: /usr/local/etc/dovecot-sql.conf userdb: driver: passwd args: blocking=yes userdb: driver: sql args: /usr/local/etc/dovecot-sql.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 438 master: path: /var/run/dovecot/auth-master mode: 438 plugin: expire: Trash 7 Spam 30 expire_dict: proxy::expire dict: expire: mysql:/usr/local/etc/dovecot-dict-expire.conf -- Jerry gesbbb(a)yahoo.com DEFAULT: The hardware's, of course.

2 1

[Dovecot] Panic: file sieve-cmu.c: line 262 (part_save): assertion failed: (buf->used - 1 == part->body_size.physical_size)
by Raffael Schmid 13 Oct '09

13 Oct '09

Hi everybody We are running in the same issue as Maciej Polewczynski does in http://www.dovecot.org/list/dovecot/2008-September/033645.html Is there already a solution? I dont think so? In the TODO-File for 1.2.2 this issue is still reported: #### [...] - sieve-cmu.c crash: i_assert(buf->used - 1 == part->body_size.physical_size); [...] #### I am not able to reproduce the problem but I think it has something to do with the charset of a mail? Because the 2 bits which are used with UTF-8 for special characters? Dovecot is running in a 64bit vServer on a 64bit host. Both are debian lenny with all patches. The dovecot-packages is backported. Just write me if you need more informations. Raffael -- About our system: # dovecot --version 1.2.2 # dovecot -n # 1.2.2: /etc/dovecot/dovecot.conf # OS: Linux 2.6.22.18-nine-vserver-grsec2.1.11-vs2.2.0.6 x86_64 Debian 5.0.3 ufs log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve ssl_cert_file: /etc/dovecot/dovecot.pem ssl_key_file: /etc/dovecot/dovecot.pem disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login login_process_per_connection: no max_mail_processes: 1500 mail_max_userip_connections(default): 30 mail_max_userip_connections(imap): 30 mail_max_userip_connections(pop3): 10 mail_max_userip_connections(managesieve): 10 verbose_proctitle: yes first_valid_uid: 70 last_valid_uid: 70 first_valid_gid: 70 last_valid_gid: 70 mail_uid: vmail mail_gid: vmail mail_location: maildir:/srv/vmail/%d/%n maildir_very_dirty_syncs: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_process_size: 756 mail_plugins(default): fts fts_squat quota imap_quota mail_plugins(imap): fts fts_squat quota imap_quota mail_plugins(pop3): quota fts fts_squat mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve pop3_reuse_xuidl(default): no pop3_reuse_xuidl(imap): no pop3_reuse_xuidl(pop3): yes pop3_reuse_xuidl(managesieve): no namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)nine.ch mail_plugins: sieve quota rejection_subject: Automatically rejected message: %s to %t rejection_reason: This_would_be_a_long_line auth default: mechanisms: plain login user: vmail username_chars: master_user_separator: / passdb: driver: passwd-file args: /etc/dovecot/dovecot.masteruser pass: yes master: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf passdb: driver: sql args: /etc/dovecot/dovecot-sql-fallback.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: sql args: /etc/dovecot/dovecot-sql-fallback.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail plugin: quota: dict:user::proxy::quotadict quota_rule: *:storage=500M quota_rule2: Trash:storage=10%% quota_warning: storage=95%% /usr/local/bin/nine-quota-warning.sh 95 %u quota_warning2: storage=80%% /usr/local/bin/nine-quota-warning.sh 80 %u quota_exceeded_message: Mailbox ist voll / Mailbox is full sieve: ~/.dovecot.sieve sieve_dir: /srv/sieve-recipes/%d/%n fts: squat fts_squat: partial=4 full=10 dict: quotadict: mysql:/etc/dovecot/dovecot-dict-quota.conf

3 3

[Dovecot] dovecot-2.0-managesieve make fails @ '...libdovecot-login.so: undefined reference to `login_process_preinit''
by PGNet Dev 13 Oct '09

13 Oct '09

building, dovecot-2.0, HEAD:10054:5cb162da8708 dovecot-2.0-sieve, 1051:1d194d46d6e6 both build fine. @, dovecot-2.0-managesieve, 159:2236331aa0a3 cd /usr/local/src/dovecot-2.0-managesieve/ ./configure \ --with-dovecot=/usr/local/src/dovecot-2.0 \ --with-dovecot-sieve=/usr/local/src/dovecot-2.0-sieve make fails @, ... gcc -DHAVE_CONFIG_H -I. -I../.. -I/usr/local/src/dovecot-2.0 -I/usr/local/src/dovecot-2.0/src/lib -I/usr/local/src/dovecot-2.0/src/lib-auth -I/usr/local/src/dovecot-2.0/src/lib-master -I/usr/local/src/dovecot-2.0/src/login-common -I../../src/lib-managesieve -I/usr/local/src/dovecot-2.0-sieve -I/usr/local/src/dovecot-2.0-sieve/src/lib-sieve -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/local/ssl/include -MT managesieve-proxy.o -MD -MP -MF .deps/managesieve-proxy.Tpo -c -o managesieve-proxy.o managesieve-proxy.c mv -f .deps/managesieve-proxy.Tpo .deps/managesieve-proxy.Po /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/local/ssl/include -o managesieve-login client.o client-authenticate.o managesieve-proxy.o /usr/local/src/dovecot-2.0-sieve/src/lib-sieve/libsieve.la /usr/local/src/dovecot-2.0/src/login-common/libdovecot-login.la ../../src/lib-managesieve/libmanagesieve.a ../../src/lib-sievestorage/libsievestorage.a /usr/local/src/dovecot-2.0/src/lib-dovecot/libdovecot.la -lrt libtool: link: gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/local/ssl/include -o .libs/managesieve-login client.o client-authenticate.o managesieve-proxy.o /usr/local/src/dovecot-2.0-sieve/src/lib-sieve/.libs/libsieve.a /usr/local/src/dovecot-2.0/src/login-common/.libs/libdovecot-login.so -L/usr/local/ssl/lib -lssl -lcrypto -lz ../../src/lib-managesieve/libmanagesieve.a ../../src/lib-sievestorage/libsievestorage.a /usr/local/src/dovecot-2.0/src/lib-dovecot/.libs/libdovecot.so -ldl -lrt -Wl,-rpath -Wl,/usr/local/lib/dovecot /usr/local/src/dovecot-2.0/src/login-common/.libs/libdovecot-login.so: undefined reference to `login_process_preinit' collect2: ld returned 1 exit status make[3]: *** [managesieve-login] Error 1 make[3]: Leaving directory `/usr/local/src/dovecot-2.0-managesieve/src/managesieve-login' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/local/src/dovecot-2.0-managesieve/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/dovecot-2.0-managesieve' make: *** [all] Error 2

2 1

[Dovecot] @2.0, autocreate fails. "Permission lookup failed"?
by PGNet Dev 12 Oct '09

12 Oct '09

i'm trying to setup autocreate in 2.0. in mail.conf, ... namespace private { separator = / prefix = "" inbox = yes hidden = no list = yes subscriptions = yes } namespace public { separator = / prefix = "Public/" inbox = no hidden = no location = maildir:/data/mail/Domains/%d/Public } namespace shared { separator = / prefix = "Shared/" inbox = no hidden = no location = maildir:/data/mail/Domains/%d/Shared } ... and in plugin.conf, ... plugin { ... autocreate = Trash autocreate2 = Spam autocreate3 = Drafts autocreate4 = Templates autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Drafts autosubscribe4 = Templates autosubscribe5 = INBOX ... ... with similar confs in v1.2, autocreate works as expected, creating all subdirs correctly. in v2.0, @ imap login (with TBird, atm), only Trash folder is created, but nothing else, ls -1 cur/ dovecot.index.log dovecot.mailbox.log dovecot-uidlist dovecot-uidvalidity dovecot-uidvalidity.4ad16699 new/ subscriptions tmp/ --> Trash/ logs show, Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Effective uid=1001, gid=1000, home=/data/mail/Domains/my.domain.com/Accounts/testuser Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: fs: root=/data/mail/Domains/my.domain.com/Accounts/testuser, index=, control=, inbox=/data/mail/Domains/my.domain.com/Accounts/testuser Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace: type=public, prefix=Public/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: maildir++: root=/data/mail/Domains/my.domain.com/Public, index=, control=, inbox= Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace Public/: Permission lookup failed from /data/mail/Domains/my.domain.com/Public Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace Public/: Using permissions from /data/mail/Domains/my.domain.com/Public: mode=0700 gid=-1 Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace: type=shared, prefix=Shared/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: maildir++: root=/data/mail/Domains/my.domain.com/Shared, index=, control=, inbox= Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace : Permission lookup failed from /data/mail/Domains/my.domain.com/Accounts/testuser/Trash Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace : Using permissions from /data/mail/Domains/my.domain.com/Accounts/testuser: mode=0700 gid=-1 Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace : Permission lookup failed from /data/mail/Domains/my.domain.com/Accounts/testuser/Trash Oct 10 22:01:11 IMAP(testuser(a)my.domain.com): Info: Namespace : Using permissions from /data/mail/Domains/my.domain.com/Accounts/testuser: mode=0700 gid=-1 Oct 10 22:01:20 imap-login: Info: Login: user=<testuser(a)my.domain.com>, method=PLAIN, rip=192.168.1.16, lip=192.168.1.22, TLS Oct 10 22:01:20 IMAP(testuser(a)my.domain.com): Info: Effective uid=1001, gid=1000, home=/data/mail/Domains/my.domain.com/Accounts/testuser Oct 10 22:01:20 IMAP(testuser(a)my.domain.com): Info: Namespace: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes Oct 10 22:01:20 IMAP(testuser(a)my.domain.com): Info: fs: root=/data/mail/Domains/my.domain.com/Accounts/testuser, index=, control=, inbox=/data/mail/Domains/my.domain.com/Accounts/testuser Oct 10 22:01:20 IMAP(testuser(a)my.domain.com): Info: Namespace: type=public, prefix=Public/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes Oct 10 22:01:20 IMAP(testuser(a)my.domain.com): Info: maildir++: root=/data/mail/Domains/my.domain.com/Public, index=, control=, inbox= Oct 10 22:01:20 IMAP(testuser(a)my.domain.com): Info: Namespace: type=shared, prefix=Shared/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=yes Oct 10 22:01:20 IMAP(testuser(a)my.domain.com): Info: maildir++: root=/data/mail/Domains/my.domain.com/Shared, index=, control=, inbox= not clear what i've missed ...what's the "Permission lookup failed" about in 2.0, but not 1.2?

2 2

[Dovecot] bsdauth with cache_key failed
by Christian Rueger 12 Oct '09

12 Oct '09

hi i test bsdauth with cache_key=%u on OpenBSD and get this error Oct 8 10:04:11 pegasus dovecot: Dovecot v1.2.6 starting up Oct 8 10:04:12 pegasus dovecot: auth(default): Panic: file passdb.c: line 201 (passdb_init): assertion failed: (passdb->passdb->default_pass_scheme != NULL || passdb->passd b->cache_key == NULL) Oct 8 10:04:12 pegasus dovecot: dovecot: child 8407 (auth) killed with signal 6 (core not dumped) Oct 8 10:04:12 pegasus dovecot: dovecot: Fatal: Auth process died too early - shutting down # 1.2.6: /etc/dovecot.conf # OS: OpenBSD 4.6 i386 base_dir: /var/dovecot/ protocols: imaps listen: *, [::] ssl_cert_file: /etc/ssl/certs/imap.pem ssl_key_file: /etc/ssl/private/imap.pem login_dir: /var/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_user: _dovecot login_max_processes_count: 32 max_mail_processes: 32 first_valid_uid: 1000 first_valid_gid: 1000 mail_location: maildir:~/Maildir mbox_write_locks: fcntl mail_plugins: expire lda: postmaster_address: postmaster(a)rueger-net.de hostname: pegasus.rueger-net.de mail_plugins: expire sieve auth_socket_path: /var/dovecot/auth-master auth default: cache_size: 1024 passdb: driver: bsdauth args: cache_key=%u userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 438 user: _postfix master: path: /var/dovecot/auth-master mode: 384 plugin: expire: Trash* 7 Spam* 7 Lists* 30 expire_dict: proxy::expire auth_socket_path: /var/dovecot/auth-master sieve_dir: ~/.sieve dict: expire: sqlite:/etc/dovecot/expire.conf

3 2

[Dovecot] Dovecot 1-2-6 and management-sieve
by Daniel Spannbauer 12 Oct '09

12 Oct '09

Hello, I try to patch the dovecot-Sources to use the management-sieve. I've downloaded the Sources, unpacked them, do a "gzip -dc dovecot-1-2-managesieve-patch-52abc11d7f48.tar.gz |patch -p1". I get a Error rom the patch: patching file README.managesieve patching file dovecot-example.conf patching file src/master/child-process.c patching file src/master/child-process.h patching file src/master/listener.c patching file src/master/login-process.c patching file src/master/mail-process.c patching file src/master/main.c patching file src/master/master-settings-defs.c patching file src/master/master-settings.c patching file src/master/master-settings.h patch unexpectedly ends in middle of line What do I wrong? Regards Daniel -- Daniel Spannbauer Software Entwicklung marco Systemanalyse und Entwicklung GmbH Tel +49 8333 9233-27 Fax -11 Rechbergstr. 4 - 6, D 87727 Babenhausen Mobil +49 171 4033220 http://www.marco.de/ Email ds(a)marco.de Geschäftsführer Martin Reuter HRB 171775 Amtsgericht München

2 2

[Dovecot] Bad_MIME on vacation messages
by Stephen Vaughan 12 Oct '09

12 Oct '09

Hi, I know I've brought this up before (see http://www.mail-archive.com/dovecot@dovecot.org/msg20974.html) and I've since upgraded to 1.2.6, but our vacation messages are still being rejected because of Bad_MIME. We are using Dovecot Sieve 0.1.12, the auto reply message contains ^M characters at the end of a few lines, they are only visable through vi, example: Received: from mail.domain.com (HELO alejandro.domain.com) (123.123.123.123) by mail.domain.com.au with SMTP; 7 Oct 2009 17:48:13 -0600 Received: (qmail 3531 invoked from network); 8 Oct 2009 10:48:18 +1100 Received: from unknown (HELO mail.domain.com.au) (192.168.200.10) by alejandro.domain.com with SMTP; 8 Oct 2009 10:48:18 +1100 Received: (qmail 16185 invoked by uid 1007); 8 Oct 2009 10:48:17 +1100 X-Sieve: Dovecot Sieve 0.1.12^M Message-ID: <dovecot-sieve-1254959297-930199-0@max>^M Date: Thu, 08 Oct 2009 10:48:17 +1100^M From: <clair(a)max.team.domain.com> To: <admin(a)domain.com.au> Subject: Out of office reply^M Auto-Submitted: auto-replied (vacation)^M Precedence: bulk^M MIME-Version: 1.0^M Content-Type: text/plain; charset=utf-8^M Content-Transfer-Encoding: 8bit^M Is there someway to fix this? Pretty much every mail server is rejecting the vacation email's. -- Best Regards, Stephen

5 9

Re: [Dovecot] mail archiving (Andreas Ntaflos)
by dhottinger＠harrisonburg.k12.va.us 11 Oct '09

11 Oct '09

Thanks Andreas, Ill look int postfix. Ive always used sendmail and was able to migrate my mailman mailing lists and aliases files over from my old mailserver several years ago when it lost its drives (thank god for backups). Luckily at that time I had a server that I was building for another totally different reason, and I just moved my configs over. Ive actually never had any issues with sendmail, but I will agree that documentation is low. Thanks for the help. As always everyone here is very helpful. take care, ddh -- Dwayne Hottinger Network Administrator Harrisonburg City Public Schools "Everything should be made as simple as possible, but not simpler." -- Albert Einstein "The hottest places in Hell are reserved for those who, in times of moral crisis, preserved their neutrality." -- Dante

1 0

[Dovecot] sievec fails when last line is a comment without trailing \n
by Peter Marschall 11 Oct '09

11 Oct '09

Hi, when switching from Dovecot 1.1 + cmusieve to Dovecot 1.2 + sieve I stumbled upon the following problem: My sieve files, generated with Dovecot 1.1's managesieve, did not compile anymore with sieve's sievec. The error message was: error: end of file before end of hash comment. Looking a bit closer I found that the last line, which was a comment, did not have a trailing newline. Adding a newline fixed the problem. I do not know if Dovecot 1.2's managesieve behaves differently, but the upgrade from cmusieve to sieve In the spirit of "be generous in what you accept but strict in what you send", is it possible for sievec to not throw an error in this case, but simply compile the file. This might help other updates from cmusieve -> sieve as well. Thanks in advance. Peter -- Peter Marschall peter(a)adpm.de

2 2

[Dovecot] soft quota lda question
by toni＠dingsbums.org 11 Oct '09

11 Oct '09

hi all, i'm using dovecot deliver (lda) and i want to show quota to the users via imap/pop3, but i don't want to enforce it (i.e. don't reject/bounce mails when quota is exceeded). protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } # In case you're using deliver: protocol lda { #mail_plugins = quota } does it work if i just comment out the "mail_plugin = quota" in the protocol lda section and leave the imap/pop3 configuration or is there another better way to do this? thanks in advance, someone2.0

2 1