- dovecot - dovecot.org

[Dovecot] Dovecot v1.2 rawlog in dovecot.conf trouble
by Steffen Kaiser 16 Jun '09

16 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, using Dovecot v1.2 changeset: 9126:b745911012bb This line in dovecot.conf make trouble (wrapped in mail): mail_executable = /usr/local/dovecot-1.2.rc5unpatched/libexec/dovecot/rawlog /usr/local/dovecot-1.2.rc5unpatched/libexec/dovecot/imap # sbin/dovecot -F Fio_loop_handle_add: epoll_ctl(1, 0): Operation not permitted Error: imap dump-capability process killed with signal 13 Fatal: Invalid configuration in /usr/local/dovecot-1.2.rc5unpatched/etc/dovecot.conf If I remove rawlog from dovecot.conf, dovecot -F starts up nicely. ============== I strace'd the problem and finally the following program is exec'ed (wrapped in mail): bunch of env-vars /usr/local/dovecot-1.2.rc5unpatched/libexec/dovecot/rawlog /usr/local/dovecot-1.2.rc5unpatched/libexec/dovecot/imap '[dump-capability' '??]' When I start this line (incl. all the env vars) as root, I get: * BAD [ALERT] imap binary must not be started from inetd, use imap-login instead. When I remove rawlog, I get: ILoading modules from directory: /usr/local/dovecot-1.2.rc5unpatched/lib/dovecot/imap [snip] IMAP4rev1 [...snip...] What I interprete as OK. Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSjYR2nWSIuGy1ktrAQJH5QgAu8lB/k2fC1ebjzJyU9Sl/8BCf4XwdjkP Z6GGtLi5wZFlW2kGyNr9gJ4Cb5VXQjzs32MKu5h1yH4uLPagy9m6TJzikp4zdiMl lt7HRxZcSA/eVzEx/HZeoezv9hBzqwP9uGJ0G1drORHqfSqPKFjWER3HhDOfAeEe MQcA9onTe08bAB3+95vHCih5Sy7c7sjKgFVUv1NOhKp/cRaALZB7LUZQhaJEOyQ8 fwtXniXCF9JRfkjmpoZT2nRSBd+M6DrSjBshCyWEQOfCX0PgeYM0ytwCsTgGUH6V xj18c0dTUuaf/G8FPzL3c8O3bbFwFlgn7b+0MvhDQdcOAiYnDjUmLA== =cTQj -----END PGP SIGNATURE-----

2 2

[Dovecot] Expire/Quota error
by Matt Rude 16 Jun '09

16 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Using both 1.2rc5 and hg version a9d3108d0cec from today, when I run the expire tools program, I receive the following error. # /usr/local/sbin/dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool --test /usr/local/sbin/dovecot --exec-mail ext /usr/local/libexec/dovecot/expire-tool --testError: dlopen(/usr/local/lib/dovecot/imap/lib10_quota_plugin.so) failed: /usr/local/lib/dovecot/imap/lib10_quota_plugin.so: undefined symbol: mountpoint_get # 1.2.rc5: /usr/local/etc/dovecot.conf # OS: Linux 2.6.27.21-170.2.56.fc10.i686 i686 Fedora release 10 (Cambridge) ext3 protocols: imap imaps managesieve listen: *:143 ssl_listen: *:993 ssl_cert_file: /etc/postfix/SSL/mail.mattrude.com.cert ssl_key_file: /etc/postfix/SSL/mail.mattrude.com.key login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_user: postfix mail_location: maildir:/var/spool/virtualmailboxes/%d/%u/:INDEX=/var/spool/virtualmailboxes/.Index/%d/%u/ mail_plugins: autocreate expire quota imap_quota zlib auth default: mechanisms: plain login cram-md5 cache_size: 128 cache_ttl: 600 passdb: driver: sql args: /etc/dovecot-mysql.conf userdb: driver: sql args: /etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: virtualmail group: virtualmail plugin: autocreate: Drafts autocreate2: Sent autocreate3: Trash autocreate4: Junk autocreate5: Junk.IsSpam autocreate6: Junk.IsNotSpam autocreate7: Save autosubscribe: Drafts autosubscribe2: Sent autosubscribe3: Trash autosubscribe4: Junk autosubscribe5: Junk.IsSpam autosubscribe6: Junk.IsNotSpam autosubscribe7: Save auth_socket_path: /var/run/dovecot/auth-master expire: Trash 1 Junk 3 expire_dict: proxy::expire quota: maildir:User quota quota_rule: *:storage=10M quota_rule2: Trash:storage=10%% quota_rule3: Junk:storage=20%% sieve: /var/spool/virtualmailboxes/%d/%u/dovecot.sieve sieve_storage: = /var/spool/virtualmailboxes/%d/%u/ trash: /etc/dovecot-trash.conf dict: expire: db:/var/spool/imap/expire.db - -- Matt Rude - lists(a)mattrude.com - http://www.mattrude.com PGPkey: 5115332 https://mail.mattrude.com/keys/0x5115332E.asc Fingerprint: 0012 4A0A 3720 6268 1802 F66D 7DCA C0A7 5115 332E -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkopu4AACgkQfcrAp1EVMy5PrACeNtxU+z0NBFpmH0vxyO0ikWAy DucAnRLiJeOirhupfjB4ebqZ0uq8fmfA =Cow4 -----END PGP SIGNATURE-----

3 5

[Dovecot] User with multiple domains
by Peter Sparkes 16 Jun '09

16 Jun '09

Hi, I am running Dovecot on Linux Debian with Exim4 with a number multiple domains. I have a new user who want to use a single username with more than one domain eg: test(a)domainone.com test(a)domaintwo.com test(a)domainthree.com Exim is working fine with mail correctly with mail going to /home/domainone.com/test/Maildir/new/ /home/domaintwo.com/test/Maildir/new/ /home/domainthree.com/test/Maildir/new/ The Dovecot password files are in /home/domainone.com/etc/passwd.dovecot /home/domaintwo.com/etc/passwd.dovecot /home/domainthree.com/etc/passwd.dovecot When trying to retrieve email using Dovecot for test(a)domaintwo.com the password is not recognised although it is for test(a)domainone.com. Help Please Peter

4 8

[Dovecot] Aging Password
by Jacopo Cappelli 16 Jun '09

16 Jun '09

I use dovecot with shadow support and i have a problem with aging password, if the password is ended dovecot continue to log me in... It's possibile to disable login if the password is ended? Hi, Jacopo -- Linux, Windows Xp ed MS-DOS (anche conosciuti come il Bello, il Brutto ed il Cattivo). -- Matt Welsh

2 1

[Dovecot] crash in imap with 1.2rc5
by Ralf Hildebrandt 16 Jun '09

16 Jun '09

>From the log: Jun 5 16:38:46 postamt dovecot: imap-login: Login: user=<username>, method=PLAIN, rip=141.42.142.67, lip=141.42.4.250 Jun 5 16:38:49 postamt dovecot: IMAP(username): Panic: Trying to sync mailbox Sent with open transactions Jun 5 16:38:49 postamt dovecot: IMAP(username): Raw backtrace: imap [0x80f0381] -> imap [0x80f0402] -> imap [0x80efd89] -> imap [0x80b5084] -> imap(imap_sync_init+0x54) [0x806fd24] -> imap [0x80623d2] -> imap(cmd_idle+0x119) [0x8062539] -> imap [0x806734c] -> imap [0x80673f3] -> imap(client_handle_input+0x2d) [0x806754d] -> imap(client_input+0x5f) [0x8067eaf] -> imap(io_loop_handler_run+0xe0) [0x80f8f90] -> imap(io_loop_run+0x20) [0x80f8400] -> imap(main+0x5f5) [0x80708b5] -> /lib/i686/cmov/libc.so.6(__libc_start_main+0xe5) [0xb7ded775] -> imap [0x805fcb1] Jun 5 16:38:49 postamt dovecot: IMAP(username): Connection closed bytes=101/783 The backtrace: GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu"... Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.9.so...done. done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /usr/local/lib/dovecot/imap/lib10_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib10_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_imap_quota_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib11_trash_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib11_trash_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_autocreate_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_autocreate_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_fts_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_fts_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_mail_log_plugin.so Reading symbols from /usr/local/lib/dovecot/imap/lib20_zlib_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib20_zlib_plugin.so Reading symbols from /usr/lib/libz.so.1...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /lib/libbz2.so.1.0...done. Loaded symbols for /lib/libbz2.so.1.0 Reading symbols from /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so...done. Loaded symbols for /usr/local/lib/dovecot/imap/lib21_fts_squat_plugin.so Reading symbols from /usr/lib/gconv/ISO8859-1.so...Reading symbols from /usr/lib/debug/usr/lib/gconv/ISO8859-1.so...done. done. Loaded symbols for /usr/lib/gconv/ISO8859-1.so Reading symbols from /usr/lib/gconv/ISO8859-15.so...Reading symbols from /usr/lib/debug/usr/lib/gconv/ISO8859-15.so...done. done. Loaded symbols for /usr/lib/gconv/ISO8859-15.so Reading symbols from /lib/libgcc_s.so.1...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `imap [username 141.42.142.67]'. Program terminated with signal 6, Aborted. [New process 11429] #0 0xb7f47424 in __kernel_vsyscall () #0 0xb7f47424 in __kernel_vsyscall () No symbol table info available. #1 0xb7e02680 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1208799244 selftid = 11429 #2 0xb7e05d68 in *__GI_abort () at abort.c:88 act = {__sigaction_handler = {sa_handler = 0x9ed64b8, sa_sigaction = 0x9ed64b8}, sa_mask = {__val = {3214921832, 135193146, 3086165728, 0, 3214921952, 3214921940, 512, 0, 0, 3214922016, 3086374512, 134566059, 516, 0, 0, 0, 1, 135263934, 512, 1, 3214921940, 166552728, 69, 3214922068, 3214921912, 135194742, 166553276, 3214921940, 3214921944, 517, 166552760, 3085608163}}, sa_flags = 517, sa_restorer = 0x81052f9 <write_full+57>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0x080f0395 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x9ed6288 "imap [0x80f0381] -> imap [0x80f0402] -> imap [0x80efd89] -> imap [0x80b5084] -> imap(imap_sync_init+0x54) [0x806fd24] -> imap [0x80623d2] -> imap(cmd_idle+0x119) [0x8062539] -> imap [0x806734c] -> ima"... #4 0x080f0402 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x8112614 "Trying to sync mailbox %s with open transactions", args=0xbf9fd1b4 "\030��\t��\237�$�\006\bX��\t") at failures.c:440 No locals. #5 0x080efd89 in i_panic ( format=0x8112614 "Trying to sync mailbox %s with open transactions") at failures.c:207 No locals. #6 0x080b5084 in mailbox_sync_init (box=0x9eeae58, flags=6) at mail-storage.c:543 No locals. #7 0x0806fd24 in imap_sync_init (client=0x9ee3360, box=0x9eeae58, imap_flags=0, flags=0) at imap-sync.c:146 ctx = (struct imap_sync_context *) 0xa23fae8 __PRETTY_FUNCTION__ = "imap_sync_init" #8 0x080623d2 in idle_sync_now (box=<value optimized out>, ctx=0x6) at cmd-idle.c:122 __PRETTY_FUNCTION__ = "idle_sync_now" #9 0x08062539 in cmd_idle (cmd=0x9ee36e8) at cmd-idle.c:243 client = (struct client *) 0x9ee3360 ctx = <value optimized out> str = <value optimized out> interval = <value optimized out> #10 0x0806734c in client_command_input (cmd=0x9ee36e8) at client.c:607 client = (struct client *) 0x9ee3360 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #11 0x080673f3 in client_command_input (cmd=0x9ee36e8) at client.c:656 client = (struct client *) 0x9ee3360 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #12 0x0806754d in client_handle_input (client=0x9ee3360) at client.c:697 _data_stack_cur_id = 3 ret = false remove_io = <value optimized out> handled_commands = false __PRETTY_FUNCTION__ = "client_handle_input" #13 0x08067eaf in client_input (client=0x9ee3360) at client.c:748 cmd = <value optimized out> output = (struct ostream *) 0x9ee3514 bytes = <value optimized out> __PRETTY_FUNCTION__ = "client_input" #14 0x080f8f90 in io_loop_handler_run (ioloop=0x9edfd88) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x9edea80 event = (const struct epoll_event *) 0x9edeac0 list = (struct io_list *) 0x9ee3598 io = (struct io_file *) 0x9f1f3d0 tv = {tv_sec = 0, tv_usec = 0} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #15 0x080f8400 in io_loop_run (ioloop=0x9edfd88) at ioloop.c:338 No locals. #16 0x080708b5 in main (argc=) at main.c:323 No locals. $1 = {prev = 0x0, next = 0x9ee35f0, client = 0x9ee3360, pool = 0x9ee35d8, tag = 0x9ee3760 "420", name = 0x9ee3768 "IDLE", args = 0x0, cmd_flags = COMMAND_FLAG_BREAKS_SEQS, func = 0x80621f0 <cmd_idle_continue>, context = 0x9ee3770, module_contexts = {arr = {buffer = 0x9ee3728, element_size = 4}, v = 0x9ee3728, v_modifiable = 0x9ee3728}, parser = 0xa1b24d8, state = CLIENT_COMMAND_STATE_WAIT_INPUT, sync = 0x0, uid = 0, cancel = 0, param_error = 0, search_save_result = 0, temp_executed = 0} $2 = {prev = 0x9ee36e8, next = 0x0, client = 0x9ee3360, pool = 0x9ee35d8, tag = 0x9ee3668 "419", name = 0x9ee3678 "UID SEARCH", args = 0x9ee3688 "UNDELETED BODY \"casa\"", cmd_flags = COMMAND_FLAG_BREAKS_SEQS, func = 0x806d690 <cmd_search_more>, context = 0x9ee36a0, module_contexts = {arr = {buffer = 0x9ee3630, element_size = 4}, v = 0x9ee3630, v_modifiable = 0x9ee3630}, parser = 0x9ee85e0, state = CLIENT_COMMAND_STATE_WAIT_INPUT, sync = 0x0, uid = 1, cancel = 0, param_error = 0, search_save_result = 0, temp_executed = 0} (gdb) quit -- Ralf Hildebrandt Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.computerbeschimpfung.de Sein Traum sei es, die Toastscheiben so hoch zu schießen, dass sie beim Wiedereintritt in die Erdatmosphäre geröstet werden.

2 1

[Dovecot] LAYOUT=fs vs LAYOUT=maildir++ and quota
by Ezequiel Alfíe 16 Jun '09

16 Jun '09

Hi everyone. I'm confused about LAYOUT=fs... Does using LAYOUT=fs breaks maildir++ quota, if I use this quota scheme? What are the advantages anyway of using LAYOUT=fs vs LAYOUT=maildir++ ? (it's not important in my case if users can't create folders with dots '.') Thanks in advance, Ezequiel

2 1

[Dovecot] shared folders in v1.2 with one uid per user
by Ezequiel Alfíe 16 Jun '09

16 Jun '09

Hello everyone. I'm new to dovecot and I'm setting up a server for one domain only. I have not yet decided whether I will be using one uid per user or one uid for all of them. What are the steps for correctly setting up shared folders with acls if I choose one uid per user? What advantages or disadvantages has setting one uid for all users vs one uid per user, considering I wish to setup shared folders (including security, performance, etc) ? Thanks in advance, Ezequiel

2 1

[Dovecot] Multiple mail locations for a single user
by Ross Burton 16 Jun '09

16 Jun '09

Hi, I use offlineimap to cache my remote IMAP mail for my multiple accounts (personal, work, etc) to several maildirs locally. At the moment in my mail client I'm using Dovecot to access one of the maildirs via IMAP, and then direct maildir access for the others. This is suboptimal however because my clients direct maildir support isn't great. Is there any way to let me access all three maildirs through dovecot? I'm guessing that I can do this with namespaces but I'm not sure. Any suggestions and pointers? Cheers, Ross -- Ross Burton mail: ross(a)burtonini.com jabber: ross(a)burtonini.com www: http://burtonini.com

3 2

[Dovecot] 1.2rc5 crash: Backtrace:dovecot-auth
by Ralf Hildebrandt 16 Jun '09

16 Jun '09

GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu"... Reading symbols from /lib/i686/cmov/libcrypt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libcrypt-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libcrypt.so.1 Reading symbols from /lib/libpam.so.0...done. Loaded symbols for /lib/libpam.so.0 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.9.so...done. done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libnss_compat.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_compat-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_compat.so.2 Reading symbols from /lib/i686/cmov/libnsl.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnsl-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnsl.so.1 Reading symbols from /lib/i686/cmov/libnss_nis.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_nis-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_nis.so.2 Reading symbols from /lib/i686/cmov/libnss_files.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_files-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_files.so.2 Reading symbols from /lib/libgcc_s.so.1...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `dovecot-auth'. Program terminated with signal 6, Aborted. [New process 31310] #0 0xb7f7a424 in __kernel_vsyscall () #0 0xb7f7a424 in __kernel_vsyscall () No symbol table info available. #1 0xb7df7680 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1208844300 selftid = 31310 #2 0xb7dfad68 in *__GI_abort () at abort.c:88 act = {__sigaction_handler = {sa_handler = 0x8669618, sa_sigaction = 0x8669618}, sa_mask = {__val = {3219629144, 134653482, 3086120672, 0, 3219629264, 3219629252, 512, 0, 0, 3219629328, 3086583408, 134536646, 541, 0, 0, 0, 1, 134703806, 512, 1, 3219629252, 140940792, 69, 3219629380, 3219629224, 134655078, 140941365, 3219629252, 3219629256, 542, 140940824, 3085563107}}, sa_flags = 542, sa_restorer = 0x807af69 <write_full+57>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0x0806c7a5 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x86691e8 "dovecot-auth [0x806c791] -> dovecot-auth [0x806c812] -> dovecot-auth [0x806c199] -> dovecot-auth [0x8056bd4] -> dovecot-auth(auth_request_set_username+0xaf) [0x8056c8f] -> dovecot-auth [0x805cdf2] -> "... #4 0x0806c812 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x807bd34 "file %s: line %d (%s): assertion failed: (%s)", args=0xbfe7a5a4 "\207�\a\bg\003") at failures.c:440 No locals. #5 0x0806c199 in i_panic ( format=0x807bd34 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #6 0x08056bd4 in auth_request_set_login_username (request=0x87bebc8, username=0x86691b0 "", error_r=0xbfe7a628) at auth-request.c:871 __PRETTY_FUNCTION__ = "auth_request_set_login_username" #7 0x08056c8f in auth_request_set_username (request=0x87bebc8, username=0x866918a "masteruser", error_r=0xbfe7a628) at auth-request.c:859 login_username = 0x86691b0 "" #8 0x0805cdf2 in mech_plain_auth_continue (request=0x87bebc8, data=0x8669188 "", data_size=21) at mech-plain.c:47 authid = 0x8669188 "" authenid = 0x8669189 "*masteruser" error = <value optimized out> pass = 0x86691a0 "xxxxxxxx" i = <value optimized out> count = <value optimized out> #9 0x0805846c in auth_request_handler_auth_begin (handler=0x867c4e8, args=0x86fcc69 "4872\tPLAIN\tservice=imap\tsecured\tlip=127.0.0.1\trip=127.0.0.1\tlport=993\trport=43359\tresp=ACptYXN0ZXJ1c2VyAFppR2FHaW5a") at auth-request-handler.c:385 mech = <value optimized out> request = (struct auth_request *) 0x87bebc8 list = (const char * const *) 0x86690c8 name = 0x8669168 "\210\221f\b\025" arg = 0x8669087 "ACptYXN0ZXJ1c2VyAFppR2FHaW5a" initial_resp = <value optimized out> initial_resp_len = 6 id = 4872 buf = (buffer_t *) 0x8669168 #10 0x080539ce in auth_client_input (conn=0x87c52e0) at auth-client-connection.c:174 _data_stack_cur_id = 3 line = 0x86fcc64 "AUTH\t4872\tPLAIN\tservice=imap\tsecured\tlip=127.0.0.1\trip=127.0.0.1\tlport=993\trport=43359\tresp=ACptYXN0ZXJ1c2VyAFppR2FHaW5a" ret = 2 #11 0x08070430 in io_loop_handler_run (ioloop=0x86711a8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x8673b58 event = (const struct epoll_event *) 0x8701a90 list = (struct io_list *) 0x875ee00 io = (struct io_file *) 0x87a0768 tv = {tv_sec = 2, tv_usec = 446563} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #12 0x0806f8a0 in io_loop_run (ioloop=0x86711a8) at ioloop.c:338 No locals. #13 0x0805c5a4 in main (argc=) at main.c:347 foreground = false (gdb) quit -- Ralf Hildebrandt Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.computerbeschimpfung.de If you tell them, they never listen. If they listen, they never learn. If they learn, they never remember. If they remember, they never obey.

2 1

[Dovecot] Archiving feature
by Romer Ventura 16 Jun '09

16 Jun '09

It would be nice to have some sort of archiving feature on which dovecot can save emails older than N+1 months to either a remote Dovecot server with MySQL as storage or a separate instance of Dovecot running on the same server but storing the emails in MySQL Is any of this possible now, or in the works...? Thanks

2 1

[Dovecot] IMP reading entire mailbox
by Chris O'Regan 16 Jun '09

16 Jun '09

We have been noticing a constant hum of traffic between our IMAP server (Dovecot v1.1.14) and our filers over the past several days. I have narrowed it down to one particular user who has been logged in to IMP/Horde since the problem began (he hadn't logged since we upgraded to Dovecot a week before). IMP is periodically checking this user's mail every five minutes. Each time it does, the his entire mailbox is being read. I initially thought it might be an indexing problem since I am also seeing messages such as this in the logs: Corrupted index cache file /local/data/dovecot/indexes/mail/X/XXXXXXXX/.imap/delivery.log/dovecot.index.cache: Broken MIME parts for mail UID 30880 But the in/out bytes being logged by Dovecot indicate that the entire contents of his mailbox are being sent to the client. That is, this user has a particularly large mailbox (~500M) and about 500M are being sent to IMP every five minutes. (Actually, what is the meaning of the above message? He's the only user logging it.) The user does have some filters defined in IMP, but I can't imagine that it would try to apply them to the entire mailbox each time it is accessed. Surely it would only apply the filters to new messages, right? But I can't think of any other reason why we would be seeing this behaviour, and only for this user. I have not yet contacted the user as I need something to tell him other than "you're a bandwidth hog". I think the next step is to ask him to disable his filters, but I would prefer not shooting in the dark. This user alone is adding about 50Mbps of bandwidth; between the time we upgraded to Dovecot (from uw-imap) and he logged in, we were witnessing a huge drop in traffic. He's ruining our graphs! ;-) Seriously, if anyone has some ideas, please let me know. Thanks! -- Chris O'Regan <chris(a)encs.concordia.ca> Senior Unix Systems Administrator, Academic IT Services Faculty of Engineering and Computer Science Concordia University, Montreal, Canada

5 17

[Dovecot] Dovecot v1.2.rc5 dbox file permissions
by Pascal Volk 16 Jun '09

16 Jun '09

Hi Timo, I've just setup Dovecot v1.2.rc5 and switched the mailbox format of one account to dbox. Therefor I've created an empty directory, called dbox, with access mode 0700, like the user's home directory. After the IMAP login with Thunderbird some dboxes was created. All permissions were set fine (0700 / 0600), except the permissions for the files: * ~/dbox/mailboxes/$FOLDERNAME/dbox-Mails/dbox.index * ~/dbox/mailboxes/$FOLDERNAME/dbox-Mails/dovecot.index.log Those files have the access mode 0666. Regards, Pascal -- The trapper recommends today: cafebabe.0916419(a)localdomain.org

2 1

[Dovecot] mixing dovecot and non-dovecot access to mail
by Michal Szymanski 16 Jun '09

16 Jun '09

Hello, I have recently installed Mailscanner/postfix for the mail server and dovecot for (mainly remote) access to email (via T'bird etc. and/or Webmail). Most users still use text mail clients (mutt, pine, some still old elm) while in the office. These clients access mail (both incoming at /var/mail/ and users' private folders in ~/Mail) directly. I wonder whether this mixing of dovecot and non-dovecot access can make any problems, provide, of course, that the users are not using both ways at the same time. AFAIK dovecot makes some indexing. Will it not be confused if the folder is changed and de-sync-ed with the index? regards, Michal. -- Michal Szymanski (msz at astrouw dot edu dot pl) Warsaw University Observatory, Warszawa, POLAND -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] dovecot-antispam plugin and "Failed to call dspam" message
by Jeremy Doran 15 Jun '09

15 Jun '09

Hi, I had this working until I recently upgraded Dovecot, and now I'm getting a message back from Thunderbird of "Failed to call dspam." when I attempt to move a message into one of the designated spam folders. However, I know from looking at the dspam system.log file, the retraining actually happens - so it -does- appear to be calling dspam. It appears that the 'move' operation fails. Here's my configuration: dovecot 1.1.16 (built from ports) dovecot-antispam 1.1 (tried from ports as well as unmodified source) dspam 3.6.8 (built from ports) FreeBSD 7.1 Relevant sections from dovecot.conf: protocol imap { mail_plugins = antispam mail_plugin_dir = /usr/local/lib/dovecot/imap ... } plugin { antispam_signature = X-DSPAM-Signature antispam_spam = SPAM;spam;Junk antispam_trash = Deleted Messages;Trash;INBOX.Trash antispam_dspam_binary = /usr/local/bin/dspam antispam_dspam_args = --deliver=;--user;%u ... } .config used by dovecot-antispam: DOVECOT=/usr/ports/mail/dovecot/work/dovecot-1.1.16 BACKEND=dspam-exec PLUGINNAME=antispam DEBUG=syslog DEBUG_VERBOSE=1 (I've tried it both with and without the DEBUG lines present in .config) Plugin debug log when I attempt to move a message: Jun 13 09:29:07 stelleri imap: antispam: mailbox_is_unsure(SPAM): 0 Jun 13 09:29:07 stelleri imap: antispam: mailbox_is_trash(INBOX): 0 Jun 13 09:29:07 stelleri imap: antispam: mailbox_is_trash(SPAM): 0 Jun 13 09:29:07 stelleri imap: antispam: mail copy: from trash: 0, to trash: 0 Jun 13 09:29:07 stelleri imap: antispam: mailbox_is_spam(INBOX): 0 Jun 13 09:29:07 stelleri imap: antispam: mailbox_is_spam(SPAM): 1 Jun 13 09:29:07 stelleri imap: antispam: mailbox_is_unsure(INBOX): 0 Jun 13 09:29:07 stelleri imap: antispam: mail copy: src spam: 0, dst spam: 1, src unsure: 0 Jun 13 09:29:07 stelleri imap: antispam: /usr/local/bin/dspam --source=error --class=spam --signature=4a339984859385209328925 --deliver= --user frysco Associated log from dspam system.log: 1244903347 M <None Specified> 4a339984859385209328925 <None Specified> 0.066815 frysco Retrained Any help appreciated, Thanks, -jcd

4 8

Re: [Dovecot] Dovecot Antispam plugin
by Johannes Berg 15 Jun '09

15 Jun '09

Timo, Christian has reported an error to me on dovecot 1.0.7, where the following code: 199 if (i_stream_read_data(mailstream, &beginning, &size, 5) < 0 || 200 size < 5) { 201 ret = -1; 202 mail_storage_set_error(t->box->storage, 203 ME(NOTPOSSIBLE) 204 "Failed to read mail beginning"); 205 goto failed_to_copy; 206 } 207 208 /* "From "? skip line */ 209 if (memcmp("From ", beginning, 5) == 0) { 210 i_stream_read_next_line(mailstream); 211 } else { 212 if (o_stream_send(outstream, beginning, 5) != 5) { 213 ret = -1; 214 mail_storage_set_error(t->box->storage, 215 ME(NOTPOSSIBLE) 216 "Failed to write line to temp"); 217 goto failed_to_copy; 218 } 219 } 220 221 if (o_stream_send_istream(outstream, mailstream) < 0) { 222 ret = -1; 223 mail_storage_set_error(t->box->storage, 224 ME(NOTPOSSIBLE) 225 "Failed to copy to spool file"); 226 goto failed_to_copy; 227 } with a mailstream that start with "X-Spam-..." will result in a file stored that starts with "X-SpaX-Spam-...". I've read the above code many times now and tried to find a problem with it, but I don't see it -- could you help us? johannes

2 4

[Dovecot] [Fwd: Re: enourmous amount of disc writes]
by Rainer Sigl 15 Jun '09

15 Jun '09

-------- Original Message -------- Subject: Re: [Dovecot] enourmous amount of disc writes Date: Mon, 15 Jun 2009 18:48:50 +0200 From: Rainer Sigl <sigl(a)mpe.mpg.de> To: Ralf Hildebrandt <Ralf.Hildebrandt(a)charite.de> References: <4A3640C5.1070105(a)mpe.mpg.de> <4A364233.6090001(a)schetterer.org> <4A365913.6030301(a)mpe.mpg.de> <20090615142836.GX29026(a)charite.de> ok, ich haette gerne von iostat 1 die folgenden Werte nach dem ersten. Die erste Zeile zeigt immer einen overall average seit dem letzten Boot an. Dieser Wert ist bei mir auch rel. harmlos. Die Spitzen sind untertags. Gruss Rainer Ralf Hildebrandt wrote: > * Rainer Sigl <sigl(a)mpe.mpg.de>: >> Hi Robert, >> many thanks for your answer! >> Yes I'm aware of the necessity to upgrade the complete system. Beside >> this I wanted to search for a quick solution. Upgrading the system >> entails many other things and is in my eyes not possible on the living >> system. > > Du wärst erstaunt was alles geht... > >> Did you ever measure the ioactiviy with iostat on your machine? >> Please tell me the output values. Which hardware do you use? > > Welches iostat output willst Du? > wir haben READ 2.0MByte/s > WRITE 0.5MBytes/s > bei 12.000 Usern. > -- ----------------- Rainer Sigl, | email: sigl(a)mpe.mpg.de MPI f. extraterrestrische Physik, | phone: +49 (89) 30000-3557 Postfach 1312, | fax: +49 (89) 30000-3569 D-85741 Garching, Germany | web: http://www.mpe.mpg.de/~sigl/ -- ----------------- Rainer Sigl, | email: sigl(a)mpe.mpg.de MPI f. extraterrestrische Physik, | phone: +49 (89) 30000-3557 Postfach 1312, | fax: +49 (89) 30000-3569 D-85741 Garching, Germany | web: http://www.mpe.mpg.de/~sigl/

1 0

[Dovecot] Dovecot Top?
by Andrew Hearn 15 Jun '09

15 Jun '09

Hello, We occasional see high load peaks on our mail servers - these generally don't only last a few minutes. 'Top' show imap taking the lots of CPU resources, is there a dovecot 'top' like program to show dovecot which users are taking system resources? Or how else can this kind of thing be tracked down? (v1.1.7) Thanks. Andrew.

2 2

[Dovecot] Sendmail + Deliver as an LDA
by Natan Vermeersch 14 Jun '09

14 Jun '09

Need help with setup/config. Current situation: (dovecot version : 1.1.7) we have system users and virtual users. (with different domains) Virtual users have procmail as LDA Now we want "deliver" to become the LDA I'm confused reading http://wiki.dovecot.org/LDA/Sendmail sendmail.mc: divert(-1) divert(0)dnl include(`/usr/share/sendmail-cf/m4/cf.m4')dnl VERSIONID(`$Id: sendmail-procmail.mc,v 1.2 2004/12/07 01:59:31 g2boojum Exp $')dnl OSTYPE(linux)dnl DOMAIN(generic)dnl define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl define(`confDONT_PROBE_INTERFACES',true)dnl define(`ALIAS_FILE', `/etc/mail/aliases')dnl dnl FEATURE(`smrsh',`/usr/sbin/smrsh')dnl dnl FEATURE(`local_lmtp',`/usr/sbin/mail.local')dnl FEATURE(`local_procmail')dnl FEATURE(`redirect')dnl FEATURE(`access_db')dnl FEATURE(`virtusertable',`hash -o /etc/mail/virtusertable')dnl dnl FEATURE(`mailertable')dnl FEATURE(`always_add_domain')dnl FEATURE(`use_ct_file')dnl FEATURE(`use_cw_file')dnl FEATURE(`blacklist_recipients')dnl dnl FEATURE(`relay_entire_domain')dnl dnl MAILER(local)dnl MAILER(smtp)dnl MAILER(procmail)dnl INPUT_MAIL_FILTER(`mimedefang', `S=unix:/var/spool/MIMEDefang/mimedefang.sock, T=S:5m;R:5m')dnl What setup do we need for both system and virtual users ? Help would be appreciated ! thx Natan _________________________________________________________________ Reageer op foto’s van je vrienden en bekijk hun reacties op de jouwe. Gegarandeerd hilariteit! http://www.microsoft.com/belux/nl/windows/windowslive/products/photos.aspx

3 9

[Dovecot] dovecot-antispam and permissions
by Tom Hendrikx 14 Jun '09

14 Jun '09

hi list, I'm having trouble with a new setup. My server is running postfix (2.5.5), dovecot (1.1.7), dspam (3.8.0). These all seems to work with eachother. When I add dovecot-antispam in the mix, the following problem occurs: New mail arrives, postfix hands the mail to dspam using a content_filter, and dspam clasifies the mail, running as the dspam user. Dspam writes its data away in a sqlite database. Mail then gets reinjected into postfix and delivered to the system user by deliver. When I manually classify a mail using dovecot-antispam, dovecot runs dspam classification as the system user. This gives the error "failed to call dspam" in my client, and the message "dspam[20203]: query error: attempt to write a readonly database: see sql.errors for more details". Since the mentioned sql.errors is owned by the system user and not by the "dspam" user, it seems that the re-classification proces is run as that user, so he has no write access to the sqlite db, which is owned by dspam:dspam. I could fix this by manually changing group ownership to the database, but maybe there is a more generic way to solve this? -- Regards, Tom

1 1

[Dovecot] Error compile dovecot 1.1.16
by Yanmarshus 14 Jun '09

14 Jun '09

/* sorry, my english is bad :-( */ There's error i found while compile dovecot 1.1.16 Compiling run on Slackware 12.2 (fresh install) Error in src/dict/main.c line 85 and line 102 dict_drivers_register_all(); and dict_drivers_unregister_all(); I know C so little, and try to add these line to dict.h void dict_drivers_register_all(void) void dict_drivers_unregister_all(void) After this patch, compiling run without error My question, is that right solution ? Thanks.

2 1

[Dovecot] dovecot-1.2-managesieve sieve_dir permissions
by Pascal Volk 13 Jun '09

13 Jun '09

Hi Stephan, I've compiled the latest managesieve code from Sun May 17th 2009. ManageSieve had created the sieve directory with 0770 permissions, but the user's home directory has only 0700 permissions. With dovecot-1.{0,1}-managesieve the permissions was set properly. Regards, Pascal -- The trapper recommends today: cafebabe.0916419(a)localdomain.org

1 0

[Dovecot] Couldn't open INBOX: Timeout while waiting for lock
by Eric Sammons 12 Jun '09

12 Jun '09

Hi, So I've been through google and the dovecot source and have not yet found a reasonable explanation for the 'Timeout while waiting for lock' error. My customer's configuration is utilizes mbox with the following mbox configs. [snip] pop3_lock_session = yes mbox_read_locks = fcntl mbox_write_locks = fcntl mbox_lock_timeout = 300 [/snip] I see from the source that this error can occur in one of two places: mbox_lock_dotlock() mbox_update_locking() Given my customer is using fcntl locking I automatically assume that it is the later where they are hitting the error. While I see in the source these errors are Temporary Errors; I do wonder what is the specific cause and what should we be looking at to address the errors. One thing we have noticed is that the errors do not occur regulararly. For exapmle, there were no such errors reported on June 9 or June 10; however on June 11 and 12 the errors started to appear. Any direction / pointers are greatly appreciated. Thank you! -- Eric L. Sammons, RHCE

2 1

[Dovecot] Dovecot as a (quota) policy server for Postfix
by Wolfram Schlich 12 Jun '09

12 Jun '09

Hi guys, I'm currently experimenting with Postfix, Dovecot and OpenLDAP to setup a mail server hosting virtual users. The standard stuff works fine so far. The only thing that doesn't work as I'd like it to do is Quota. Currently, Dovecot handles/enforces quota through the deliver LDA. When Postfix tries to deliver a mail to a mailbox that is over quota, the deliver LDA bounces the mail back to the sender. I don't like that. I'd rather prefer Postfix to reject the mail right after receiving the '.' DATA termination line and having checked whether the users quota is or would be exceeded. This could work by writing a small Postfix policy server/daemon that does exactly that Dovecot does: - get the user quota limit from userdb (from LDAP in my case) - get the user quota used (from maildirsize in my case) _ check whether the current mail size + quota used exceed the quota limit and if true, reject the mail Of course this would only work for mails going to a single local recipient address, but most of the time, that's just the case. Now I can re-implement that part of functionality from Dovecot in Perl and write such a small policy daemon that does exactly fit my setup (LDAP + maildirsize). There's one thing I'd like much better, though: What about extending Dovecot by a small policy server module for Postfix? Dovecot already has all the code to do the "over quota" checks and supports a great number of combinations for quota limit and used quota storage. My Postfix instance already kinda depends on a running Dovecot due to Dovecot-SASL for SMTP-Authentication and Dovecot-deliver for mail delivery, so it wouldn't introduce a completely new dependency either. Timo (and all others), what do you think about such a Postfix policy server implemented as a part of Dovecot? -- Regards, Wolfram Schlich <wschlich(a)gentoo.org> Gentoo Linux * http://dev.gentoo.org/~wschlich/

3 2

[Dovecot] gmail pop3 fetcher sets my emails as read
by Julien Buratto 12 Jun '09

12 Jun '09

Hello, I'm testing gmail to fetch my emails via POP3 and I've noticed that on the server where I run dovecot, the emails that gmail take, are marked as read when I imap my emails with my thunderbird. As I've noticed that this is not true for the email accounts on another mail environment, I was wondering if anyone of you could sugged where I could change the behaviour. My configuration is: # 1.1.8: /etc/dovecot.conf # OS: Linux 2.6.9-67.0.4.EL i686 CentOS release 4.7 (Final) log_path: /var/log/maillog info_log_path: /var/log/maillog protocols: imap pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: mbox:~/mail/:INBOX=mbox mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: cache_size: 1024 verbose: yes passdb: driver: pam args: session=yes cache_key=%u%s dovecot userdb: driver: passwd Thank you for helping -- Julien Buratto

2 3

[Dovecot] Dovecot fails to deliver in mail clients
by Zwelabantu Ngwenya 12 Jun '09

12 Jun '09

Morning I am new to linux and have configured a Postfix + Dovecot Mail server on my SUSE Linux Server 10 SP2 Machine. Postfix works fine I assume as mail gets delivered to user's mailbox or directories. But when I configure a mail client to download mail from the server it finds no mail. When I check the user's mailbox using Webmin mail is delivered. I have also tried to telnet to the server when I do I am able to log in with user's credentials but when I type the list or stat command telnet says there is no mail 0.0Kb. I have tried everything, mail gets delivered to inboxes but telnet and mail clients don't get mail. Please let me know what I am doing wrong Zwelabantu Ngwenya

3 2

[Dovecot] unable to send mails via postfix/dovecot SASL
by Michal Szymanski 11 Jun '09

11 Jun '09

Hello, I have a freshly setup postfix/dovecot mail server (after a server upgrade I decided to change my sendmail/popper conf to something more modern :) It mostly works, there is no problem in sending/receiving mails in local network, both using text clients like mutt or pine dealing with the incoming/outcoming mail directly. Also dovecot works fine with SSL authentication from the outside world (home computers etc) but only for reading the mail. I have been struggling for several days already to get postfix/dovecot/SSL trio to work for sending (relaying) mail from the home computers (but also from local network) via my server to the final recipients, using authenticated connections. I followed http://wiki.dovecot.org/HowTo/PostfixAndDovecotSASL hints for the configuration of postfix and dovecot (see output of dovecot -n and postconf -n commands below). I also uncommented "smtps" line in /etc/postfix/master.cf file (otherwise postfix was refusing any connections to secure SMTP port). For a while, I uncommented also "submission" line there but to no success either. Now when I try to send a mail from my home PC, using Thuinderbird 2.0.0.21, with SSL connection configured for outgoing smtp server (port 465), using username/password, it shows "Connected to server..." message but after a minute or so, it fails saying that the connection to SMTP server failed. The server log shows: 11:51:24 sirius postfix/smtpd[15126]: connect from my_home_pc_name/ip Jun 11 11:52:25 sirius postfix/smtpd[15126]: lost connection after UNKNOWN from from my_home_pc_name/ip Jun 11 11:52:25 sirius postfix/smtpd[15126]: disconnect from my_home_pc_name/ip There are no dovecot-related messages in the log regarding such an attempt. I am not sure whether this is dovecot or postfix problem but, being no expert on either of those, I am asking help to resolve this annoying problem. with best regards, Michal. -------------- dovecon -n -------------------------- # 1.0.7: /etc/dovecot.conf ssl_cert_file: /etc/pki/dovecot/certs/sirius.pem ssl_key_file: /etc/pki/dovecot/private/sirius.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: mbox:~/Mail:INBOX=/var/spool/mail/%u mmap_disable: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh imap_client_workarounds(pop3): outlook-idle pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login verbose: yes passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix ----------------- postconf -n ---------------------------- alias_database = hash:/etc/mail/aliases alias_maps = hash:/etc/mail/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 header_checks = regexp:/etc/postfix/header_checks html_directory = no inet_interfaces = all mail_owner = postfix mailbox_command = /usr/bin/procmail mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man masquerade_domains = astrouw.edu.pl mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, mail.$mydomain, www.$mydomain, ftp.$mydomain, /etc/mail/local-host-names myhostname = sirius.astrouw.edu.pl newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_generic_maps = hash:/etc/postfix/generic smtpd_recipient_restrictions = check_recipient_access hash:/etc/postfix/access, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_unlisted_recipient smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot unknown_local_recipient_reject_code = 550 --------------------------------------------------------------- -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 7

[Dovecot] Problem with Courier POP3 Migration to dovecot POP3
by Ashraf 11 Jun '09

11 Jun '09

Hi Timo/all Help me please, i am in the process of migrating courier to dovecot 1.1.14. I want to do migration as users loging so i am using this script * http://www.dovecot.org/tools/courier-dovecot-migrate.pl *, When i do use post-logging script to migrate* POP3*, its downloading messages again (*Duplicating messages)* , as some of our users prefer to leave messages on server. If i run the script manually on particular users home directory and try to download it *still duplicating messages, *as its creating whole new set of dovecot files. * * About my environment -- MailDir's stored in NFS location -- User Authenticated using MySQL my dovecot.conf looks like base_dir = /var/run/dovecot/ protocols = imap pop3 listen = *, [::] log_path =/var/log/dovecot.log info_log_path = /var/log/dovecot-info.log ssl_disable = yes login_process_per_connection = no login_processes_count = 10 login_max_processes_count = 128 login_max_connections = 256 login_greeting = Dovecot ready. mail_location = maildir:~/ mail_debug = yes mmap_disable = yes dotlock_use_excl = yes mail_nfs_index = yes lock_method = dotlock mail_drop_priv_before_exec = yes first_valid_uid = 195 max_mail_processes = 512 mail_process_size = 256 mailbox_idle_check_interval = 20 protocol imap { } protocol pop3 { *mail_executable = /usr/libexec/dovecot/postpop3.sh* mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb sql { args = /etc/dovecot-mysql.conf } userdb sql { args = /etc/dovecot-mysql.conf } user = root } dict { } plugin { } ---- my postloggin script -- $ cat /usr/libexec/dovecot/postpop3.sh #!/bin/sh # WARNING: Be sure to use mail_drop_priv_before_exec=yes, # otherwise the files are created as root! /usr/libexec/dovecot/courier-dovecot-migrate.pl --quiet --to-dovecot --recursive --convert ${HOME} # This is for pop3 exec /usr/libexec/dovecot/pop3 ---- Please advise am i doing something wrong, please guide me, let me know if you need any more info about my setup. -- Regards Ashraf

2 1

[Dovecot] Panic with signal 6 core dump with revision 9116:9ae55b68cf61
by Jonathan Siegle 11 Jun '09

11 Jun '09

Jun 2 10:05:14 hostname dovecot: IMAP(testuser): Panic: file istream- raw-mbox.c: line 380: assertion failed: (new_pos > 0) Jun 2 10:05:14 hostname dovecot: dovecot: child 544822 (imap) killed with signal 6 (dbx) where raise(??) at 0x90000000005a68c abort() at 0x900000000085c2c default_fatal_finish(type = LOG_TYPE_PANIC, status = 0), line 160 in "failures.c" i_internal_fatal_handler(type = LOG_TYPE_PANIC, status = 0, fmt = "file %s: line %d: assertion failed: (%s)", args = ""), line 440 in "failures.c" i_panic(format = "file %s: line %d: assertion failed: (%s)", ... = 0x1001731b4, 0x17c, 0x100173328, 0x0, 0x15b5, 0x0, 0x0), line 207 in "failures.c" i_stream_raw_mbox_read(stream = 0x00000001100ca6b0), line 380 in "istream-raw-mbox.c" i_stream_raw_mbox_read(stream = 0x00000001100ca6b0), line 379 in "istream-raw-mbox.c" i_stream_read(stream = 0x00000001100ca700), line 80 in "istream.c" i_stream_limit_read(stream = 0x00000001100cb930), line 64 in "istream- limit.c" i_stream_read(stream = 0x00000001100cb980), line 80 in "istream.c" i_stream_read_copy_from_parent(istream = 0x00000001100cbb20), line 118 in "istream.c" i_stream_header_filter_read(stream = 0x00000001100cbad0), line 315 in "istream-header-filter.c" i_stream_read(stream = 0x00000001100cbb20), line 80 in "istream.c" i_stream_read_copy_from_parent(istream = 0x00000001100cbd20), line 118 in "istream.c" i_stream_mail_stats_read_mail_stats(stream = 0x00000001100cbcd0), line 47 in "istream-mail-stats.c" i_stream_read(stream = 0x00000001100cbd20), line 80 in "istream.c" i_stream_read_data(stream = 0x00000001100cbd20, data_r = 0x0fffffffffffecc0, size_r = 0x0fffffffffffecc8, threshold = 1), line 361 in "istream.c" message_parser_read_more(ctx = 0x00000001100cc118, block_r = 0x0fffffffffffecb0, full_r = 0x0fffffffffffeb84), line 118 in "message- parser.c" parse_next_body_to_boundary(ctx = 0x00000001100cc118, block_r = 0x0fffffffffffecb0), line 330 in "message-parser.c" message_parser_parse_next_block(ctx = 0x00000001100cc118, block_r = 0x0fffffffffffecb0), line 768 in "message-parser.c" message_parser_parse_body(ctx = 0x00000001100cc118, hdr_callback = (nil), context = (nil)), line 831 in "message-parser.c" index_mail_parse_body(mail = 0x00000001100c9878, field = MAIL_CACHE_FLAGS), line 792 in "index-mail.c" index_mail_get_parts(_mail = 0x00000001100c9878, parts_r = 0x0fffffffffffef28), line 224 in "index-mail.c" mail_get_parts(mail = 0x00000001100c9878, parts_r = 0x0fffffffffffef28), line 71 in "mail.c" unnamed block in search_arg_match_text(args = 0x00000001100c7e70, ctx = 0x00000001100c95f0, ret = -1), line 647 in "index-search.c" search_arg_match_text(args = 0x00000001100c7e70, ctx = 0x00000001100c95f0, ret = -1), line 647 in "index-search.c" search_match_next(ctx = 0x00000001100c95f0), line 1101 in "index- search.c" unnamed block in index_storage_search_next_nonblock(_ctx = 0x00000001100c95f0, mail = 0x00000001100c9878, tryagain_r = 0x0ffffffffffff1e0), line 1301 in "index-search.c" index_storage_search_next_nonblock(_ctx = 0x00000001100c95f0, mail = 0x00000001100c9878, tryagain_r = 0x0ffffffffffff1e0), line 1301 in "index-search.c" mailbox_search_next_nonblock(ctx = 0x00000001100c95f0, mail = 0x00000001100c9878, tryagain_r = 0x0ffffffffffff1e0), line 754 in "mail-storage.c" cmd_search_more(cmd = 0x0000000110022058), line 347 in "imap-search.c" cmd_search_more_callback(cmd = 0x0000000110022058), line 434 in "imap- search.c" unnamed block in io_loop_handle_timeouts_real(ioloop = 0x000000011001f310), line 316 in "ioloop.c" io_loop_handle_timeouts_real(ioloop = 0x000000011001f310), line 316 in "ioloop.c" unnamed block in io_loop_handle_timeouts(ioloop = 0x000000011001f310), line 327 in "ioloop.c" io_loop_handle_timeouts(ioloop = 0x000000011001f310), line 327 in "ioloop.c" io_loop_handler_run(ioloop = 0x000000011001f310), line 162 in "ioloop- poll.c" io_loop_run(ioloop = 0x000000011001f310), line 338 in "ioloop.c" main(argc = 1, argv = 0x0ffffffffffff630, envp = 0x0ffffffffffff640), line 323 in "main.c"

2 2

[Dovecot] Quota over NFS with inode limit
by Patrick Domack 11 Jun '09

11 Jun '09

I tried searching this list, but couldn't find anything related to inode limits except for linux quotas. I wanted to add sieve support for our users, so was attempting to get our email system to use dovecot's deliver lda to handle email, instead of postfix's virtual lda, using maildir mailstore. When I did this, I noticed that emails would get stuck in the queue if a user was over quota, this got fixed when I added in quota support, and set it up to check it using the line: quota = fs:User quota:user:inode_per_mail Now if a user excedes disk space via quota, it's bounced with a message. But if a user excedes their inode quota, it's still tempfail and hangs in the queue till it expires. I just wanted to know if anyone knows about this issue, if I made a stupid mistake or anything else, before I go digging into the source.

2 7

[Dovecot] Sieve per virtual mailbox
by Joan 11 Jun '09

11 Jun '09

Hi all, Dovecot with the "new Sieve" works fine, but 1 - how to have a global script AND 1 script per virtual maibox ? 2 - how to allow a user to change this script (from Thunderbird or Outlook) Thanks JM

4 8

[Dovecot] record points outside file error with dovecot revision 9116:9ae55b68cf61
by Jonathan Siegle 11 Jun '09

11 Jun '09

I use mbox with mbox-snarf plugin. I get errors like: dovecot: IMAP(testuser): Corrupted index cache file /full/path/ dovecot.index.cache: record points outside file The errors can be in either folders or INBOX. I put some syslog statements in src/lib-index/mail-cache-lookup.c to help understand this. if (offset + sizeof(*rec) > cache->mmap_length) { mail_cache_set_corrupted(cache, "record points outside file"); syslog(LOG_DEBUG,"mail_cache_get_record rec->size is %d ", rec->size); syslog(LOG_DEBUG,"cache->mmap_length is %d ", cache- >mmap_length); syslog(LOG_DEBUG,"offset is %d ", offset); return -1; } syslog: mail_cache_get_record rec->size is 268595472 syslog: cache->mmap_length is 4096 syslog: offset is 1630760037 Oh I forgot to print off sizeof(*rec). Would that help? Thanks, Jonathan

3 12

Re: [Dovecot] dovecot Digest, Vol 74, Issue 36
by javier.garcia＠ibercom.com 11 Jun '09

11 Jun '09

Estimados Sres. En este momento me encuentro fuera de la oficina hasta el día 22 de Junio. Cualquier tema urgente contacte directamente con Ibercom ya sea por teléfono o por la cuenta de correo de soporte. Perdone las molestias. Un saludo, Javier García.

1 0

[Dovecot] SELinux
by Kenneth Porter 11 Jun '09

11 Jun '09

I've temporarily got SELinux set to permissive mode on a fresh install on CentOS 5. It was blocking Dovecot's access to ~/mail because the files were labeled file_t. What's the correct way to label these?

2 2

Re: [Dovecot] dovecot Digest, Vol 74, Issue 35
by javier.garcia＠ibercom.com 10 Jun '09

10 Jun '09

Estimados Sres. En este momento me encuentro fuera de la oficina hasta el día 22 de Junio. Cualquier tema urgente contacte directamente con Ibercom ya sea por teléfono o por la cuenta de correo de soporte. Perdone las molestias. Un saludo, Javier García.

1 0

Re: [Dovecot] New patch for folder pattern matches
by Steffen Kaiser 10 Jun '09

10 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sun, 7 Jun 2009, Johannes Berg wrote: Hallo Johannes, > Nice. I gave it an almost complete rewrite again, getting rid of the > magic array indexes and things like that. Please test, I haven't had a es gab einen off-by-one Bug beim Laden der Config. Dort habe ich noch eine "2" durch den Enum-Wert ersetzt. Beim Test sieht's super aus! Man koennte jetzt noch match_fn[] in die match_name[] packen, um alles zusammen zu haben ... . Wie ist das eigentlich, das Feld, auf den der Rueckgabewert von getenv() zeigt, darf nicht veraendert werden, oder? Ansonsten koennte man: strings[i] = p_strsplit(global_pool, tmp, ";"); if (i == MT_PATTERN_IGNCASE) { /* lower case the string */ char **list = strings[i]; while (*list) { lowercase_string(*list, *list); ++list; } } durch if (i == MT_PATTERN_IGNCASE) { lowercase_string(tmp, tmp); } strings[i] = p_strsplit(global_pool, tmp, ";"); ersetzen und Zeit sparen. Tschuess, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSi+sAHWSIuGy1ktrAQJVZgf+JpKXXSh2kwthE47OmsGLriaDhRsbiIkx 6ikOgxbvpsHXKri2h9Y0+NSG5mQnfOvT6AAz1dtapJvXxj+Z84s35xzu3xCfjnNV ent383Go6/7lrqJDvwU6Gvg3yQmXGLDPwI7OKTOK6nrcIOwrOfEx/KBfIqfEBMAp P/uxzFpUgwbDduWakKb0YobciXKm/WQ4FzP/gvHVr5cMMXKUi8Cn+EPhqE6U9gNI jwriJyxWNLC+/YIzJZZtmaRb8QXala8gGdIa56mNu2iR9p4JeYIOBWY0UgGWqKV+ TtPRm9g+DZUi3wd5avnt7YRkAbiwVw9T3mrZ9TmDHW05ZCTg41MAKA== =kxfl -----END PGP SIGNATURE-----

1 0

Re: [Dovecot] dovecot and ntp: Fatal: Time just moved backwards
by Eugene 10 Jun '09

10 Jun '09

Hi Timo, > Date: Tue, 9 Jun 2009 09:40:20 -0700 > From: Timo Sirainen <tss(a)iki.fi> > > On Jun 8, 2009, at 11:40 PM, Arno Wald wrote: > >> Timo Sirainen wrote: >>> Hmm. I suppose I could change Dovecot master so that if no imap/ >>> pop3 processes have been created yet, it would silently ignore the >>> clock move. >> >> Also it might be an idea to just restart dovecot instead of >> completely stopping it. If this happens to often in a certain time >> interval it still could be stopped to avoid too many restarts in a >> loop if there is an error situation somehow. > > http://wiki.dovecot.org/TimeMovedBackwards bottom answers this. A > restart isn't much better than just ignoring the time change. But really, all this leads is that admin has to detect the dovecot termination and simply go and restart it manually -- after some bad thoughts. I think that a config option to restart silently (or simply kill all connected imap/pop3 instances) would be quite reasonable. Basically it is the only thing I don't like in Dovecot... and was even planning to hack the time check out of the code =)) Best wishes Eugene

7 12

[Dovecot] 1.2rc5, another crash: Backtrace:dovecot-auth
by Ralf Hildebrandt 10 Jun '09

10 Jun '09

Another crahs with backtrace: GNU gdb 6.8-debian Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu"... Reading symbols from /lib/i686/cmov/libcrypt.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libcrypt-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libcrypt.so.1 Reading symbols from /lib/libpam.so.0...done. Loaded symbols for /lib/libpam.so.0 Reading symbols from /lib/i686/cmov/libdl.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libdl-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libdl.so.2 Reading symbols from /lib/i686/cmov/libc.so.6...Reading symbols from /usr/lib/debug/lib/i686/cmov/libc-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libc.so.6 Reading symbols from /lib/ld-linux.so.2...Reading symbols from /usr/lib/debug/lib/ld-2.9.so...done. done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/i686/cmov/libnss_compat.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_compat-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_compat.so.2 Reading symbols from /lib/i686/cmov/libnsl.so.1...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnsl-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnsl.so.1 Reading symbols from /lib/i686/cmov/libnss_nis.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_nis-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_nis.so.2 Reading symbols from /lib/i686/cmov/libnss_files.so.2...Reading symbols from /usr/lib/debug/lib/i686/cmov/libnss_files-2.9.so...done. done. Loaded symbols for /lib/i686/cmov/libnss_files.so.2 Reading symbols from /lib/libgcc_s.so.1...done. Loaded symbols for /lib/libgcc_s.so.1 Core was generated by `dovecot-auth'. Program terminated with signal 6, Aborted. [New process 7692] #0 0xb8071424 in __kernel_vsyscall () #0 0xb8071424 in __kernel_vsyscall () No symbol table info available. #1 0xb7eee680 in *__GI_raise (sig=6) at ../nptl/sysdeps/unix/sysv/linux/raise.c:64 resultvar = <value optimized out> pid = -1207832588 selftid = 7692 #2 0xb7ef1d68 in *__GI_abort () at abort.c:88 act = {__sigaction_handler = {sa_handler = 0x8f90618, sa_sigaction = 0x8f90618}, sa_mask = {__val = {3220762632, 134653482, 3087132384, 0, 3220762752, 3220762740, 512, 0, 0, 3220762816, 3087595120, 134536646, 541, 0, 0, 0, 1, 134703806, 512, 1, 3220762740, 150537720, 69, 3220762868, 3220762712, 134655078, 150538293, 3220762740, 3220762744, 542, 150537752, 3086574819}}, sa_flags = 542, sa_restorer = 0x807af69 <write_full+57>} sigs = {__val = {32, 0 <repeats 31 times>}} #3 0x0806c7a5 in default_fatal_finish (type=<value optimized out>, status=0) at failures.c:160 backtrace = 0x8f901e8 "dovecot-auth [0x806c791] -> dovecot-auth [0x806c812] -> dovecot-auth [0x806c199] -> dovecot-auth [0x8056bd4] -> dovecot-auth(auth_request_set_username+0xaf) [0x8056c8f] -> dovecot-auth [0x805cdf2] -> "... #4 0x0806c812 in i_internal_fatal_handler (type=LOG_TYPE_PANIC, status=0, fmt=0x807bd34 "file %s: line %d (%s): assertion failed: (%s)", args=0xbff8f154 "\207�\a\bg\003") at failures.c:440 No locals. #5 0x0806c199 in i_panic ( format=0x807bd34 "file %s: line %d (%s): assertion failed: (%s)") at failures.c:207 No locals. #6 0x08056bd4 in auth_request_set_login_username (request=0x9060148, username=0x8f901b0 "", error_r=0xbff8f1d8) at auth-request.c:871 __PRETTY_FUNCTION__ = "auth_request_set_login_username" #7 0x08056c8f in auth_request_set_username (request=0x9060148, username=0x8f9018a "masteruser", error_r=0xbff8f1d8) at auth-request.c:859 login_username = 0x8f901b0 "" #8 0x0805cdf2 in mech_plain_auth_continue (request=0x9060148, data=0x8f90188 "", data_size=21) at mech-plain.c:47 authid = 0x8f90188 "" authenid = 0x8f90189 "*masteruser" error = <value optimized out> pass = 0x8f901a0 "xxxxxxxx" i = <value optimized out> count = <value optimized out> #9 0x0805846c in auth_request_handler_auth_begin (handler=0x90dddd0, args=0x90dcf70 "4877\tPLAIN\tservice=imap\tsecured\tlip=127.0.0.1\trip=127.0.0.1\tlport=993\trport=43362\tresp=ACptYXN0ZXJ1c2VyAFppR2FHaW5a") at auth-request-handler.c:385 mech = <value optimized out> request = (struct auth_request *) 0x9060148 list = (const char * const *) 0x8f900c8 name = 0x8f90168 "\210\001�\b\025" arg = 0x8f90087 "ACptYXN0ZXJ1c2VyAFppR2FHaW5a" initial_resp = <value optimized out> initial_resp_len = 6 id = 4877 buf = (buffer_t *) 0x8f90168 #10 0x080539ce in auth_client_input (conn=0x8f9add8) at auth-client-connection.c:174 _data_stack_cur_id = 3 line = 0x90dcf6b "AUTH\t4877\tPLAIN\tservice=imap\tsecured\tlip=127.0.0.1\trip=127.0.0.1\tlport=993\trport=43362\tresp=ACptYXN0ZXJ1c2VyAFppR2FHaW5a" ret = 2 #11 0x08070430 in io_loop_handler_run (ioloop=0x8f981a8) at ioloop-epoll.c:208 ctx = (struct ioloop_handler_context *) 0x8f9ab58 event = (const struct epoll_event *) 0x90d4a20 list = (struct io_list *) 0x8f9afa8 io = (struct io_file *) 0x8f9af80 tv = {tv_sec = 1, tv_usec = 290883} t_id = 2 msecs = <value optimized out> ret = 1 i = 0 j = 0 call = <value optimized out> #12 0x0806f8a0 in io_loop_run (ioloop=0x8f981a8) at ioloop.c:338 No locals. #13 0x0805c5a4 in main (argc=) at main.c:347 foreground = false (gdb) quit ----- End forwarded message ----- -- Ralf Hildebrandt Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.computerbeschimpfung.de >From empirical experience, your Exchange admin needs to put down the crack pipe and open a window to disperse the fumes.

1 0

[Dovecot] dovecot auth(default): Master request xxxx.xxxx not found
by Eric Sammons 09 Jun '09

09 Jun '09

Hi, Wondering if anyone could give some indication as to where to look for the cause of the following error messages. These error messages seem to occur at about the time when users are having problems logging in. Jun 8 10:33:19 host dovecot: auth(default): Master request xxxx.xxxx not found Using ldap for authentication and auth_cache is enabled, not sure if that matters. Thank you! -- Eric L. Sammons, RHCE

2 1

[Dovecot] Resync quota to mysql script
by Oli Schacher 09 Jun '09

09 Jun '09

I changed some quota options in my dovecot config (eg. excluded folders) but afaik this only affects new mail and there is no magic command to recalculate the quota (or is there?). So I wrote this little python script to do this, maybe someone finds it useful. It can output the sql statements (dovecot 1.0/1.1 and 1.2 format) or just print out quota usage to console. Download at : http://wgwh.ch/dovecot/quotasync.py , run-at-own-risk and do-whith-the-code-what-you-want applies. # cd /path/to/a/Maildir # quotasync.py INBOX : 21 messages 516739 bytes .postfix : 982 messages 7572888 bytes .bn_archiv : 77 messages 2092454 bytes .python : 2748 messages 19877135 bytes .testfolder.subfolder1.subsubfolder1 : 2 messages 19443 bytes .testfolder.subfolder2 : 1 messages 9044 bytes .testfolder : 0 messages 0 bytes .Trash : 146 messages 1702297 bytes .Drafts : 0 messages 0 bytes .Sent : 0 messages 0 bytes .Spam : 2459 messages 16152165 bytes .testfolder.subfolder1 : 4 messages 13359 bytes ------------------- TOTAL: 6440 messages 47955524 bytes Example mysql output,dovecot 1.2 format: # quotasync.py -o mysql -a user(a)domain.com INSERT INTO quota (username,bytes,messages) VALUES ('user(a)domain.com',47963905,6441) ON DUPLICATE KEY UPDATE bytes=47963905,messages=6441; Example mysql output, dovecot 1.1 format, Spam folder excluded # quotasync.py -o mysql -a user(a)domain.com -d 1.1 -e .Spam INSERT INTO quota (username,path,current) VALUES ('user(a)domain.com','quota/messages',3982) ON DUPLICATE KEY UPDATE current=3982; INSERT INTO quota (username,path,current) VALUES ('user(a)domain.com','quota/storage',31811740) ON DUPLICATE KEY UPDATE current=31811740; You can pipe this output directly to mysql. eg.: quotasync.py -a user(a)domain.com -o mysql | mysql yourdatabase run quotasync.py --help to see all options

2 2

[Dovecot] Dovecot deliver with ACL plugin enabled truble
by Nikita Koshikov 09 Jun '09

09 Jun '09

Hello folk, I have trouble running /usr/libexec/dovecot/deliver with ACL plugin enabled from my exim configurarion. Everything is working fine if I disable plugin ACL from lda section in dovecot config. This is the string from exim.conf, which request delivery to take place: command = /usr/libexec/dovecot/deliver -e -d $local_part@$domain In dovecot error-log I see this, when deliver tries to "put" message in users maildir: ==> /var/log/dovecot/dovecot-deliver.log <== deliver(user(a)domain.com): Jun 09 15:07:38 Info: Loading modules from directory: /usr/lib/dovecot/lda deliver(user(a)domain.com): Jun 09 15:07:38 Info: Module loaded: /usr/lib/dovecot/lda/lib01_acl_plugin.so deliver(user(a)domain.com): Jun 09 15:07:38 Info: Module loaded: /usr/lib/dovecot/lda/lib10_quota_plugin.so deliver(user(a)domain.com): Jun 09 15:07:38 Info: Module loaded: /usr/lib/dovecot/lda/lib11_trash_plugin.so deliver(user(a)domain.com): Jun 09 15:07:38 Info: Module loaded: /usr/lib/dovecot/lda/lib20_expire_plugin.so deliver(user(a)domain.com): Jun 09 15:07:38 Info: auth input: uid=8 deliver(user(a)domain.com): Jun 09 15:07:38 Info: auth input: gid=12 deliver(user(a)domain.com): Jun 09 15:07:38 Info: auth input: home=/var/mail/domain.com/user deliver(user(a)domain.com): Jun 09 15:07:38 Info: auth input: mail=maildir:/var/mail/domain.com/user/data deliver(user(a)domain.com): Jun 09 15:07:38 Info: Quota root: name=Mailbox quota backend=maildir args= deliver(user(a)domain.com): Jun 09 15:07:38 Info: Quota rule: root=Mailbox quota mailbox=* bytes=524288000 messages=0 deliver(user(a)domain.com): Jun 09 15:07:38 Info: Quota rule: root=Mailbox quota mailbox=Trash bytes=52428800 (10%) messages=0 deliver(user(a)domain.com): Jun 09 15:07:38 Info: maildir: data=/var/mail/domain.com/user/data deliver(user(a)domain.com): Jun 09 15:07:38 Info: maildir++: root=/var/mail/domain.com/user/data, index=, control=, inbox=/var/mail/domain.com/user/data deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: initializing backend with data: vfile deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: acl username = user(a)domain.com deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: owner = 1 deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl vfile: Global ACL directory: (null) deliver(user(a)domain.com): Jun 09 15:07:38 Info: trash plugin: Added 'Spam' with priority 1 deliver(user(a)domain.com): Jun 09 15:07:38 Info: trash plugin: Added 'Trash' with priority 2 deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: initializing backend with data: vfile deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: acl username = user(a)domain.com deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl: owner = 1 deliver(user(a)domain.com): Jun 09 15:07:38 Info: acl vfile: Global ACL directory: (null) deliver(user(a)domain.com): Jun 09 15:07:38 Fatal: mail_full_filesystem_access=yes is incompatible with ACLs In my current dovecot config-file option mail_full_filesystem_access is commented out. I have tried both variants to explicitly enable and disable this feature, but errors stayed the same. Please advice. Additional info: Here is my lda config: protocol lda { postmaster_address = postmaster(a)domain.com mail_plugins = quota acl trash expire quota_full_tempfail = yes auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot/dovecot-deliver.log info_log_path = /var/log/dovecot/dovecot-deliver.log } This is my dovecot config-file: # 1.1.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-gentoo-r4 i686 Gentoo Base System release 1.12.11.1 ext3 log_path: /var/log/dovecot/dovecot-error.log info_log_path: /var/log//dovecot/dovecot.log protocols: imaps ssl_cert_file: /etc/dovecot/ssl/imaps.crt ssl_key_file: /etc/dovecot/ssl/imaps.key login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login login_greeting_capability: yes login_processes_count: 10 login_max_processes_count: 512 first_valid_uid: 8 last_valid_uid: 8 first_valid_gid: 12 last_valid_gid: 12 mail_location: maildir:/var/mail/%d/%n/data mail_debug: yes mail_plugins: quota imap_quota acl trash mail_log fts fts_squat expire mail_log_max_lines_per_sec: 0 auth default: mechanisms: plain login cache_size: 10240 cache_negative_ttl: 0 user: mail debug: yes worker_max_count: 50 passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf passdb: driver: passwd-file args: scheme=cram-md5 /etc/dovecot/cram-md5.pwd userdb: driver: prefetch userdb: driver: ldap args: /etc/dovecot/dovecot-userdb-ldap.conf userdb: driver: passwd-file args: /etc/dovecot/cram-md5.pwd socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 user: mail group: mail plugin: quota: maildir:Mailbox quota quota_rule: *:storage=500M quota_rule2: Trash:storage=10%% acl: vfile trash: /etc/dovecot/plugins/dovecot-trash.conf expire: Trash 7 Spam 30 expire_dict: proxy::expire mail_log_events: delete undelete expunge copy mailbox_delete mail_log_group_events: mail_log_fields: uid box msgid size fts: squat dict: expire: sqlite:/etc/dovecot/plugins/expire.conf

1 0

[Dovecot] Managesieve
by Thomas E. Deutsch 09 Jun '09

09 Jun '09

Hi I've a problem. I've built a new mailserver for our company based on dovecot (1.1.15). At the same time, our company's name has changed. The old mail addresses are forwarded to the new addresses. But I've a problem with sieve. It looks like the sieve filters are only working for the new addresses. But due to the change of the name was not long ago, most of the mails are still sent to the old addresses. What can I do to get filters also working for the old addresses? Configuration of managesieve: protocol managesieve { listen = *:2000 login_executable = /usr/lib/dovecot/managesieve-login mail_executable = /usr/lib/dovecot/managesieve sieve = /home/vmail/%Ld/%Ln/sieve/dovecot.sieve sieve_storage = /home/vmail/%Ld/%Ln/sieve managesieve_implementation_string = Cyrus timsieved v2.2.13 # mail_debug=yes } Regards, Thomas

2 1

[Dovecot] Login processes in Dovecot
by Scott Haneda 09 Jun '09

09 Jun '09

I will be deploying Dovecot on OS X shortly. I am looking for clarification on the limits imposed by OS X and sysctl [kern.maxproc]. I understand that it is defaulting to 532, but can be raised to 2500. I believe the OS uses around 100 or so, plus I will have other processes and shells at times. Does Dovecot use one process per user logged in? I find Apple Mail uses about 4 IMAP connections per account. I am not sure that my current number of mail users would be able to be supported on OS X even if I bump up to 2500. Does Dovecot use one process per user logged in differently based on IMAP versus POP? Perhaps this is something that can also be changed in Dovecot, if so, can someone point me to the docs about it, or explain the downsides of going against default behavior. If this is the case, what are my options? Does OS X server have a higher limit in their kernel, or is this across the board? Is it even possible to compile a kernel for OS X with this change, or does that generally mess things up pretty bad? FreeBSD and Solaris seem to have much higher limits, and certainly a much more approachable way of upping those limits. Does anyone know why OS X chose to set these so low, especially given that they do sell server based hardware with a server based OS. Thanks. -- Scott * If you contact me off list replace talklists@ with scott@ *

4 9

[Dovecot] Mailbox isn't a valid mbox file
by Kenneth Porter 08 Jun '09

08 Jun '09

Getting "Mailbox isn't a valid mbox file" on 1.2rc2 after transferring mail from an ancient 0.99.13 system. The first line of the file looks ok. Curiously, it's one of my archival folders of this list. Here's the first header from the top of the file: >From tss at iki.fi Sat May 1 21:48:17 2004 From: tss at iki.fi (Timo Sirainen) Date: Sat May 1 21:54:18 2004 Subject: [Dovecot] 1.0-test2 released Message-ID: <1083437297.21296.19.camel@hurina> X-IMAPbase: 1085322222 20128 Status: RO X-UID: 14065 Content-Length: 226989 X-Keywords: It would be nice if the code that verified the mailbox format would log details about what it disliked.

3 4

Re: [Dovecot] Dovecot + FreeBSD-7.2 + ZFS ?
by Frank Bonnet 08 Jun '09

08 Jun '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello Thanks for the feedback ! I'll plan to run it at 7.2 and of course certainly not on a production server without numerous tests ! Dino Ming wrote: > Just to let you guys know, I have nightmare with FreeBSD 7.0-RELEASE + ZFS. > It brought to me an unrecoverable filesystem error. > It is a good technology. But I would wait for it to be more mature before > production. > > I would highly suggest to run a stress test if you really bring it to production > state. > > Dino. > > Frank Bonnet wrote: > Geoffroy Desvernay wrote: > >>>> Frank Bonnet a écrit : >>>> >>>>> Hello >>>>> >>>>> Anyons has tested this configuration with success ? >>>>> >>>>> I'll test it in few days and I am wondering if I am alone :-) >>>>> >>>>> >>>> Not ZFS, but various combinations of dovecot 1.1.15+FreeBSD(7.1 and >>>> 7.2)+(NFS and UFS). No problem for us® ;) >>>> >>>> > > Yes I too , just curious about ZFS > -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkos4ZIACgkQ6f7UMO5oSsXUjACeJCrMjVvQwh7sW6h5Vaw6vMqN HRQAoJR7j0jSPtxsBzntaBzZgc4JAJe1 =gVum -----END PGP SIGNATURE-----

5 7

[Dovecot] General performance of RC5
by Joan 08 Jun '09

08 Jun '09

Hi all, Switiching to RC5, there is a visible decrease in performance to access via IMAP large accounts (>1G) with mutiple mailboxes per accounts. In RC4, there was no delay visible by a human when accessing locally. Now it takes up to 4 or 5 secs. (running on OpenSuse, mysql 5.1.35 for auth, dbox as back end) Anybody experienced also this ? Thanks Joan

2 2

[Dovecot] Dovecot 1.2 + AIX setups
by Jonathan Siegle 08 Jun '09

08 Jun '09

Is anyone running Dovecot on AIX? I'm trying to debug the "Corrupted index cache file... record points outside file" problem. I can give gory details about what I've tried, but for now I would just like to see setups on AIX. Thanks, Jonathan

1 0

[Dovecot] Dovecot + FreeBSD-7.2 + ZFS ?
by Frank Bonnet 08 Jun '09

08 Jun '09

Hello Anyons has tested this configuration with success ? I'll test it in few days and I am wondering if I am alone :-) Thanks

3 3

Re: [Dovecot] Password environment variable - logging the password
by Donovan Craig 07 Jun '09

07 Jun '09

Timo Sirainen wrote: > Hmm. I guess it's possible that the password is lost by then.. Then > another possibility would be to use passdb sql + userdb prefetch and: > > password_query = SELECT .., '%w' as userdb_plain_pass, .. That did the trick. Thanks so much for your help.

1 0

Re: [Dovecot] Password environment variable - logging the password
by Donovan Craig 07 Jun '09

07 Jun '09

>> On Jun 6, 2009, at 5:19 AM, Donovan Craig wrote: >> Im using the mysql userdb, but the passwords are stored in MD5. >> I want to be able to get the password within the post login script, >> not from >> the log file. >> >> Is there any way to do this? > Timo Sirainen wrote: > user_query = SELECT '%w' as plain_pass, ... > then it should be in $PLAIN_PASS environment in post-login script. This would be great if it worked, but unfortunately this %w is empty when I try to use it. >From the documentation, it seems that this variable is only available during auth. http://wiki.dovecot.org/Variables Is there any other way I can get the plain password within the postloginscripting? Thanks again. Donovan

2 1

Re: [Dovecot] Password environment variable - logging the password
by Donovan Craig 06 Jun '09

06 Jun '09

> look at the setting: > > # In case of password mismatches, log the passwords and used scheme so the # problem can be debugged. Requires auth_debug=yes to be set. > #auth_debug_passwords = no Thanks for your replies so far. As mentioned, I¹d like to be able to log the username and password in plain text after successful login. I¹m using the mysql userdb, but the passwords are stored in MD5. I want to be able to get the password within the post login script, not from the log file. Is there any way to do this? Thanks. Donovan

2 1