- dovecot - dovecot.org

Re: [Dovecot] sa learning from an imap spam folder
by frank.kintrup＠fkware.de 11 Apr '08

11 Apr '08

This is my approach, stored in /etc/cron.hourly. It's very new, so I'm still testing it. The goal is to learn HAM massages only if they are a day old, so that I can manually remove SPAM that slipped through. Mails tagged from Spamassassin are sorted automatically into the "Junk.Spam" mailbox and learned after 12 hours. I manually move any missed SPAM into the .Junk mailbox, so I'm sure there are no wrongly tagged messages there, so I can learn those messages as soon as they are found by cron. /etc/cron.hourly/sa-learn: #!/bin/sh umask 022 # Learn HAM messages which were roughly received between 24 and 25 hours ago find \ /var/vmail/fkware.de/frank.kintrup/Maildir/ \ -path '/var/vmail/fkware.de/frank.kintrup/Maildir/.Junk*' -prune -o \ -path '/var/vmail/fkware.de/frank.kintrup/Maildir/.Sent' -prune -o \ -path '/var/vmail/fkware.de/frank.kintrup/Maildir/.Trash' -prune -o \ -path '/var/vmail/fkware.de/frank.kintrup/Maildir/.Draft' -prune -o \ -iname '*server.fkware.de*' -type f -mmin +1435 -mmin -1505 \ -execdir sa-learn --username=vmail --no-sync --ham {} \; \ /dev/nul 2>/dev/nul # Learn and delete SPAM messages which were manually moved to the Junk folder find \ /var/vmail/fkware.de/frank.kintrup/Maildir/.Junk/ \ -iname '*server.fkware.de*' -type f \ -execdir sa-learn --username=vmail --no-sync --spam {} \; \ -execdir rm {} \; \ >/dev/nul 2>/dev/nul # Learn and delete SPAM messages which were received more than 12 hours ago # and automatically put into the Junk.Spam folder find \ /var/vmail/fkware.de/frank.kintrup/Maildir/.Junk.Spam/ \ -iname '*server.fkware.de*' -type f -mmin +720 \ -execdir sa-learn --username=vmail --no-sync --spam {} \; \ -execdir rm {} \; \ >/dev/nul 2>/dev/nul sa-learn --username=vmail --sync >/dev/nul exit 0

8 8

[Dovecot] new mail server
by Allen Sim 11 Apr '08

11 Apr '08

Hi i am a newbie in setting up a mail server.I am using CentOS and complete installed OpenLDAP,pam,dovecot,sendmail & squirrelmail. Now, how should i start to send & receive through the mail server? How should i add a user and try to send & receive mail? I am trying to use Thunderbird...but how should i start? Please advice... thanks

2 2

[Dovecot] qmail + dovecot & vmail
by Peter Van den Wildenbergh 11 Apr '08

11 Apr '08

Hi List, I have a working qmail server and installed dovecot trying to setup vmail... it's not going as expected... What is working: qmail I can log-in using Thunderbird (IMAP) from dovecot-info.log dovecot: Apr 10 21:19:54 Info: imap-login: Login: user=<peter(a)---.com>, method=PLAIN, rip=192.168.10.50, lip=192.168.10.188 Config bits: Ubuntu (command-line system) 7.10 ls -l /home drwxr-xr-- 2 vmail vmail ... vmail UID GID for vmail = 500 Content of /etc/dovecot/dovecot.conf protocols = imap imaps log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log ssl_disable = yes disable_plaintext_auth = no mail_location = maildir:~/Maildir dotlock_use_excl=yes maildir_copy_with_hardlinks=yes auth_verbose = yes auth default { mechanisms = plain passdb passwd-file { args = /etc/dovecot/passwd } userdb static { args = uid=500 gid=500 home=/home/vmail/%d/%n } } cat /etc/dovecot/passwd peter@meta-logica.com:{SSHA}iDMg--- peter@wilboo.org:{SSHA}iDMg--- cat /var/qmail/control/defaultdelivery |/var/qmail/bin/preline -f /usr/lib/dovecot/deliver -d $EXT@$USER (LWQ setup - verified location of 'deliver') Looks like local delivery for qmail is NOT working :-( from the logs: starting delivery 8: msg 3752525 to local peter@ma--- status: local 1/10 remote 0/20 delivery 8: deferral: Can't_open_log_file_/var/log/dovecot.log:_Permission_denied/ status: local 0/10 remote 0/20 status: exiting permission on /var/log/dovecot.log = -rw-r--r-- 1 vmail vmail 728 2008-04-10 21:36 /var/log/dovecot.log qmailctl stat messages in queue: 7 messages in queue but not yet preprocessed: 3 So I assume that the inability to 'log' is stopping the delivery process... Couldn't find anything obvious on google. Any suggestions? Regards Peter

1 0

[Dovecot] Sieve Frustrations
by Shawn 11 Apr '08

11 Apr '08

I'm soooo close, but this last little thing is eluding me... I have the following Sieve rule in my global sieve rule: require ["fileinto"]; # Move spam to spam folder if header :contains "X-Spam-Flag" "YES" { fileinto "Junk"; stop; } This isn't firing. The .Junk folder exists under the user directories, but messages that have the X-Spam-Flag set are still going into INBOX. My personal Sieve rules are firing properly (now), so I know Sieve is operational. Just the global rule isn't being applied. If it helps, I set up my server according http://workaround.org/articles/ispmail-etch/ - but on a Ubuntu Gutsy server with only a few minor deviations from that article. My protocol lda section of dovecot.conf has this: log_path = /home/vmail/dovecot-deliver.log global_script_path = /home/vmail/globalsieverc I don't see any messages in dovecot-deliver.log that says there are problems with Sieve. The above rule is in /home/vmail/globalsieverc as mentioned here. This was working once - but when I had it going into the "spam" folder. I changed the folder name to match what ThunderBird sets up automagically for it's junk controls. But like I say, the directory does exist. So, I'm a little stumped. Any suggestions on where I can look to sort this out? If it helps, I've attached my dovecot conf (via dovecot -n) below. Thank you for your time! Shawn root@mail:~# dovecot -n # 1.0.5: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/dovecot.pem ssl_key_file: /etc/ssl/private/dovecot.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_extra_groups: mail mail_location: maildir:/home/vmail/%d/%n mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 384 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail

3 4

[Dovecot] Procmail died with Signal 11
by Johannes Grimm 10 Apr '08

10 Apr '08

Hi to all out there, i know this is not the right mailinglist for this issue, but i?m hoping to get maybe here an answer to my problem. i have succesfully migrated 12.000 mailboxes on a debaian with washington imap to maildir on sles10 with dovecot. although i had some post-converting work to do, i can say that almost everything went fine. but there is one problem with my LDA. When postfix is about to deliver a lot of mail (user-db is ldap) procmail dies with signal 11. here is the error log: Apr 3 08:19:17 mailvirtuell postfix/local[22367]: E42EF33A96: to=<root(a)fh-rosenheim.de>, relay=local, delay=17, delays=0.08/0.11/0/17, dsn=5.3.0, status=bounced (Command died with signal 11: "IFS=` `&& exec /usr/bin/procmail || exit 75 #Ja". Command output: procmail: Exceeded LINEBUF ) I googled the whole inet for this problem and found a lot, but no solution seems to fit my problem. most articles point on this parameter for procmailrc "Linebuf". i found out that the default value is 2048k for message header reading. i doubled this value, with no effect. but i guess that a 4kb message header space must be enough to deal with. one hint last: starting value for ldap timeout was 10 secs. with this value the log went crazy like the above log-snip. i changed the timeout to 300 secs and thougt that was the trick, but there are still some process wich are diying after all. i?m using postfix 2.5.1, procmail 3.22, dovecot 1.0.13, with sophos and amavis. i would be really grateful for any ideas. best regards Johannes Grimm -- ============================================================== Hochschule für angewandte Wissenschaften - Fachhochschule Rosenheim University of Applied Sciences Rechenzentrum Johannes Grimm Hochschulstr.1 D-83024 Rosenheim Tel: +49-8031/805-229 Fax: +49-8031/805-223 http://www.fh-rosenheim.de/ johannes.grimm(a)fh-rosenheim.de ==============================================================

2 2

Re: [Dovecot] GETQUOTAROOT?
by Leonor F. Martins 10 Apr '08

10 Apr '08

Thank you for your message. I will be out of the office on Wednesday, April 9. If your message is urgent, please contact the Wellesley College HelpDesk at 781-283-3333. Leonor F. Martins Systems and Network Manager Wellesley College 106 Central Street Wellesley, MA 02481 Phone: 781.283.2886 E-mail: lmartins(a)wellesley.edu

1 0

Re: [Dovecot] Sieve Frustrations
by Leonor F. Martins 10 Apr '08

10 Apr '08

Thank you for your message. I will be out of the office on Wednesday, April 9. If your message is urgent, please contact the Wellesley College HelpDesk at 781-283-3333. Leonor F. Martins Systems and Network Manager Wellesley College 106 Central Street Wellesley, MA 02481 Phone: 781.283.2886 E-mail: lmartins(a)wellesley.edu

1 0

[Dovecot] Delete old mails and refresh quota
by Nicolas Letellier 09 Apr '08

09 Apr '08

Hello. I use dovecot 1.0.13. So, I can't use expire plugin (require dovecot 1.1+). For delete old mails in Junk mailboxe, I use a cron: find /var/mail/vmails/ -regex '.*Junk/cur/.*' -ctime +30 -delete It works. However, quota is not refreshed. If my quota is to 90% and I delete 85% of my mails, quota still 90%, not 5%. I must delete my maildirsize after this cron. Do you have another solution to actualisize my maildirsize after a delete of mail? Thanks! - Nicolas.

1 0

Re: [Dovecot] Newbie Sieve Problems
by Leonor F. Martins 09 Apr '08

09 Apr '08

Thank you for your message. I will be out of the office on Wednesday, April 9. If your message is urgent, please contact the Wellesley College HelpDesk at 781-283-3333. Leonor F. Martins Systems and Network Manager Wellesley College 106 Central Street Wellesley, MA 02481 Phone: 781.283.2886 E-mail: lmartins(a)wellesley.edu

1 0

[Dovecot] Newbie Sieve Problems
by Shawn 09 Apr '08

09 Apr '08

I had a nice long email written out describing my problem in detail. Between that, the list archives, and double-checking before posting, I'm happy to say my issue seems to be fixed. How's that for service from a mailing list? Helped me fix a problem before I have ever posted to it (this is my first post to this list). The issue was a faulty rule. Using a redirect to a folder rather than a fileinto. Guess it was still sorta valid though cuz I did run it through a sieve rule checker. Thanks list! Shawn

1 0

[Dovecot] temporary disable account
by Lampa 08 Apr '08

08 Apr '08

Hello, is there some way how to disable temporarily account or access to files. I need to backup with tar, but there is problem when tar is reading and some file changed (with --ignore-failed-read it continues but archive is not created and without --ignore-failed-read it fails). Some accounts are huge ;( Need something like qmail sticky bit or world writable directory - qmail is not delivering when one of above conditions hits. Thank you for helping me. -- Lampa

5 8

[Dovecot] Plugin trash does not work
by Nicolas Letellier 08 Apr '08

08 Apr '08

Hi. I use dovecot 1.0.13 on FreeBSD 7.0. I want my Junk mail will be deleted if my quota is exceeded. So, I configured trash plugin (with Dovecot wiki). In my dovecot.conf: protocol imap { mail_plugins = quota trash } plugin { trash = /usr/local/etc/dovecot-trash.conf } In my /usr/local/etc/dovecot-trash.conf: 1 Junk 2 Trash Emails in there mailboxes are never deleted. My mailbox is like this: .Junk dovecot-uidlist dovecot.index.log.2 tmp .Trash dovecot.index maildirsize cur dovecot.index.cache new dovecot-keywords dovecot.index.log subscriptions I want my .Junk directory be emptied when quota is exceeded. May i forgot something? Could you help me? Thanks very much! - Nicolas.

1 0

[Dovecot] Strange dmesg messages
by Raphael Bittencourt S. Costa 08 Apr '08

08 Apr '08

Guys, I'm getting strange messages on my new server with dovecot-1.1rc4 + lda + sieve + ldap + postfix + suse10. This server is in production since monday, and worked fine until today. The only thing I had changed was dovecot from 1.1rc3 to 1.1rc4. I already enabled mail_debug, but I got any erros after that. Does anyone have any idea of what is happening? Unable to handle kernel NULL pointer dereference at 0000000000000020 RIP: <ffffffff8019df99>{sys_inotify_rm_watch+280} PGD 1107f0067 PUD 1154c8067 PMD 0 Oops: 0002 [1] SMP last sysfs file: /block/sda/size CPU 2 Modules linked in: iptable_filter ip_tables x_tables nls_utf8 joydev st sr_mod ipv6 bonding button battery ac raid0 xfs_quota ext3 jbd loop sddlmfdrv ehci_hcd uhci_hcd hw_random usbcore shpchp ide_cd cdrom pci_hotplug bnx2 sddlmadrv xfs exportfs dm_snapshot edd dm_mod fan thermal processor lpfc scsi_transport_fc sg megaraid_sas piix sd_mod scsi_mod ide_disk ide_core Pid: 24319, comm: imap Tainted: P U 2.6.16.21-0.8-smp #1 RIP: 0010:[<ffffffff8019df99>] <ffffffff8019df99>{sys_inotify_rm_watch +280} RSP: 0018:ffff810112abbf38 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff81008bd57cf8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8100360627b8 RBP: 0000000000000000 R08: 000000000000db6a R09: 00000000051ae25c R10: 0000000047f3f600 R11: 0000000000000213 R12: ffff81008bd57cc0 R13: ffff8100360627b8 R14: ffff8100360625b0 R15: ffff810121f7c580 FS: 00002b90b22a5ae0(0000) GS:ffff81012bd6b340(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000010adca000 CR4: 00000000000006e0 Process imap (pid: 24319, threadinfo ffff810112aba000, task ffff810026b107d0) Stack: 00000001f8c42d10 ffffffff8017b3d3 0000000000000001 00000000005ff680 00000000006027a0 0000000000000000 00000000ffffffff 00000000005e0420 00007ffff8c4af20 ffffffff8010a7be Call Trace: <ffffffff8017b3d3>{sys_read+69} <ffffffff8010a7be>{system_call+126} And dovecot's log only shows: Apr 2 18:09:16 mailserver02 dovecot: POP3(paulo.faria@): Disconnected: Logged out top=0/0, retr=1/2248, del=0/495, size=2406763 2 Apr 2 18:09:20 mailserver02 deliver(everson.todoroki@): msgid=<20080402210925.B94E2400A735(a)relay01.com.br>: saved m ail to INBOX Apr 2 18:09:20 mailserver02 dovecot: child 24319 (imap) killed with signal 9 Apr 2 18:09:21 mailserver02 dovecot: pop3-login: Login: user=<afarber@>, method=PLAIN, rip=10.0.3.2, lip=10.0.149.2 Apr 2 18:09:21 mailserver02 deliver(everson.todoroki@): msgid=<20080402210927.74F36400A8F0(a)relay02.com.br>: saved m ail to INBOX Apr 2 18:09:23 mailserver02 dovecot: pop3-login: Login: user=<alexandre.pellegrini@>, method=PLAIN, rip=10.0.3.2, lip=10.0.149. 2 mailserver02:~ # dovecot -n # 1.1.rc4: /etc/dovecot//dovecot.conf syslog_facility: local1 protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no shutdown_clients: no login_dir: /usr//var/run/dovecot/login login_executable(default): /usr//libexec/dovecot/imap-login login_executable(imap): /usr//libexec/dovecot/imap-login login_executable(pop3): /usr//libexec/dovecot/pop3-login login_process_per_connection: no login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no login_process_size: 128 login_processes_count: 30 login_max_processes_count: 1024 login_max_connections: 512 max_mail_processes: 10240 mail_uid: 1033 mail_gid: 1033 mail_location: maildir:%h/Maildir mail_debug: yes mail_executable(default): /usr//libexec/dovecot/imap mail_executable(imap): /usr//libexec/dovecot/imap mail_executable(pop3): /usr//libexec/dovecot/pop3 mail_plugins(default): quota imap_quota autocreate mail_plugins(imap): quota imap_quota autocreate mail_plugins(pop3): quota mail_plugin_dir(default): /usr//lib/dovecot/imap mail_plugin_dir(imap): /usr//lib/dovecot/imap mail_plugin_dir(pop3): /usr//lib/dovecot/pop3 maildir_copy_with_hardlinks = yes pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %f pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls namespace: type: private prefix: INBOX. inbox: yes list: yes subscriptions: yes auth default: mechanisms: plain login cache_size: 20480 cache_ttl: 300 cache_negative_ttl: 0 passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: prefetch userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 438 plugin: quota: maildir quota_rule: *:bytes=10240 quota_rule2: *:messages=30000 autocreate: SPAM.E Spam autocreate2: SPAM.Marcar Spam autocreate3: SPAM autocreate4: SPAM.Desmarcar Spam []s, Raphael Costa

5 16

[Dovecot] dovecot and postfix virtual mailbox domains
by Dave 08 Apr '08

08 Apr '08

Hello, I'm trying to get dovecot and postfix virtual domains working on an fc6 system. My software versions are postfix 2.4.5 installed from rpm and dovecot 1.0.3 also installed from rpm. I'm only running secure protocols, pop3s at the moment, imaps later on. I've set up postfix for virtual mailbox domains as per it's howto on the subject and confirmed that email sent gets delivered to the virtual area, which in this case is /home/vmail/domain.com/username, there's a maildir under that. In this case the user is a shell user who has a login, in all other cases the users will be completely virtual, having no login account and being completely virtual. When i atempt to get mail from the server using this user, the one with the login, i am getting a can not map username coming from dovecot. Here's my config: # 1.0.3: /etc/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/dovecot info_log_path: /var/log/dovecot.info protocols: pop3s ssl_ca_file: /etc/dovecot/ca-cert.pem ssl_cert_file: /etc/dovecot/pop.cert ssl_key_file: /etc/dovecot/pop.key ssl_cipher_list: ALL:!LOW disable_plaintext_auth: yes login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/pop3-login valid_chroot_dirs: /var/spool/vmail mail_extra_groups: mail mail_location: maildir:/home/vmail/%d/%u maildir_copy_with_hardlinks: yes mail_executable: /usr/libexec/dovecot/pop3 mail_plugin_dir: /usr/lib64/dovecot/pop3 auth default: mechanisms: plain login verbose: yes passdb: driver: passwd userdb: driver: passwd I'd appreciate any pointers. I think i am close, but am not seeing it. Thanks. Dave.

1 0

[Dovecot] feature request: deny IP address via database
by Dave McGuire 08 Apr '08

08 Apr '08

Hey folks. One feature I'd really like to see in dovecot is the ability to point it at a database (with a configurable query) and have it allow or deny a connection based on looking up the source IP address in that database. I run Postfix, and I've got it configured to use a database server for its smtpd_client_restrictions checks. Ideally I'd like to point dovecot at the same database table. I have external tools that maintain that table. I was thinking of writing it myself, but I'm running 1.0.10; I'd assume that any such modifications would need to be rewritten for 1.1. Then I got to thinking that such functionality would likely be useful to people other than just me, so.. Thoughts? -Dave -- Dave McGuire Port Charlotte, FL

4 5

Re: [Dovecot] feature request: deny IP address via database
by Javier García 08 Apr '08

08 Apr '08

Written by Bill Cole on Apr 7, 2008, at 4:58 PM: >> Hey folks. One feature I'd really like to see in dovecot is the >> ability to point it at a database (with a configurable query) and >> have it allow or deny a connection based on looking up the source >> IP address in that database. ... much stuff discarded. I understand that the behaviour requested is similar to that of allow_nets (http://wiki.dovecot.org/PasswordDatabase/ExtraFields/AllowNets) but modified to explicitly deny some IPs (individually or in the range form). If so, probably some of the work should be already done. Sorry, I do not have the programming abilities enough to face this. Incidentally, I would like to notice that I opened a thread a few days ago regarding allow_nets and database (Bill's request needs to make use of an external database too) because I am not able to make allow_nets work properly when using an external DB *and IP ranges*. Maybe Bill would like to block single IPs so this bug? wold not apply to his case if an extension or adaptation of allow_nets is done. (My request, in case someone out there is curious: "Allow_nets + MySQL failing when using range notation") Regards, Javier

1 0

[Dovecot] A little assistance with Sieve
by cam＠ellisonpsychology.ca 07 Apr '08

07 Apr '08

With all the mess that my email has become, it makes sense for me to try to make use of Sieve, but I'm having quite the time finding out how to make it work. I'm running 1.0.13 on a Debian machine. Sieve appears to be compiled with it. I can access managesieve, and I have set up dovecot.conf with lda. I do not get a NO response when I PUTSCRIPI, but LISTSCRIPTS produces no result, so I assume it's not working properly, though if I try with a non-existent script I get an error message. Questions: 1. Is anyone else seeing this, or am I doing something wrong? 2. I have seen through Googling some dovecot.conf examples that suggest I should be using managesieve instead of lda (or in addition? - it's not clear), as in protocol managesieve { ... Any advice will be gratefully received. Thank you Cam -- Cam Ellison, PhD RPsych (BC #01417) Cam Ellison & Associates Ltd. 3446 Beach Avenue Roberts Creek BC V0N 2W2 Phone 604.885.4806 Fax 694.885.4809 Cell 604.989.0635

2 4

[Dovecot] A little assistance with Sieve
by cam＠ellisonpsychology.ca 07 Apr '08

07 Apr '08

With all the mess that my email has become, it makes sense for me to try to make use of Sieve, but I'm having quite the time finding out how to make it work. I'm running 1.0.13 on a Debian machine. Sieve appears to be compiled with it. I can access managesieve, and I have set up dovecot.conf with lda. I do not get a NO response when I PUTSCRIPI, but LISTSCRIPTS produces no result, so I assume it's not working properly, though if I try with a non-existent script I get an error message. Questions: 1. Is anyone else seeing this, or am I doing something wrong? 2. I have seen through Googling some dovecot.conf examples that suggest I should be using managesieve instead of lda (or in addition? - it's not clear), as in protocol managesieve { ... Any advice will be gratefully received. Thank you Cam -- Cam Ellison, PhD RPsych (BC #01417) Cam Ellison & Associates Ltd. 3446 Beach Avenue Roberts Creek BC V0N 2W2 Phone 604.885.4806 Fax 694.885.4809 Cell 604.989.0635

1 0

[Dovecot] Problem with dovecot under Vmware Server
by Marvin Raab 06 Apr '08

06 Apr '08

Hi all, Recently installed dovecot and postfix under Fedora8 and it works great. Then I installed both postfix and dovecot under VMWare Server (different machine) copying the same configuration files but changing the hostname and domain as appropriate. When testing the installation using: telnet hostname 143, I receive * OK Dovecot ready But when I telnet on port 25, I receive: Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. Instead of: Trying 127.0.0.1... Connected to 127.0.0.1. Escape character is '^]'. 220 mail.kickspam.net ESMTP Postfix Naturally, I cannot send email. Outlook responds with Server timeout. I've rebooted and restarted services. I've checked poermissions and postfix master.cf How can I troubleshoot or does anyone have a quick answer? Thanks! Here's the output of dovecot -n and postconf -n The same config files are on both hosts and only the installation under VMWare Server has the problem. [root@vmhost ~]# dovecot -n # 1.0.13: /etc/dovecot.conf login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: mbox:~/mail:INBOX=/var/spool/mail/%u mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix [root@vmhost ~]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man message_size_limit = 50240000 mydestination = $myhostname, $mydomain, localhost mydomain = mydomain.com myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES relay_domains = $mydestination sample_directory = /usr/share/doc/postfix-2.4.5/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot unknown_local_recipient_reject_code = 550

3 2

[Dovecot] Broken Debian package
by Thing 06 Apr '08

06 Apr '08

Hi, I have run Dovecot via Debian for some years but in the last few weeks something has broken....I have been upgrading Debian but today rebooted it to try and sort out a failed DLT....now I find dovecot is non-functional.... So, Where to look for faults please? ie logs? can I make dovecot verbose? Thunderbird if telling me Dovecot is not imap4 compliant........and I cannot connect to it... I have tried re-installing Dovecot but the Debian package contains no dovecot.conf....so I have dovecot imap-d and dovecot common installed but no config. So I copied back the config files from a safe location.... When I start up I get, hermes:/var/log# tail dovecot dovecot: 2008-04-06 11:32:32 Info: Dovecot v1.0.rc15 starting up hermes:/var/log# So trying to connect, tail -f (on /var/log/dovecot), dovecot: 2008-04-06 11:57:34 Info: imap-login: Login: user=<thing>, method=plain, rip=192.168.1.101, lip=192.168.1.254, TLS dovecot: 2008-04-06 11:57:34 Error: IMAP(thing): seq = 186, rec->uid = 0, first_new_seq = 188, records = 187 dovecot: 2008-04-06 11:57:34 Error: child 20048 (imap) killed with signal 6 dovecot: 2008-04-06 11:57:34 Info: imap-login: Login: user=<thing>, method=plain, rip=192.168.1.101, lip=192.168.1.254, TLS dovecot: 2008-04-06 11:57:34 Error: IMAP(thing): seq = 186, rec->uid = 0, first_new_seq = 188, records = 187 dovecot: 2008-04-06 11:57:34 Error: child 20050 (imap) killed with signal 6 dovecot: 2008-04-06 11:57:34 Info: imap-login: Login: user=<thing>, method=plain, rip=192.168.1.101, lip=192.168.1.254, TLS dovecot: 2008-04-06 11:57:34 Error: IMAP(thing): seq = 186, rec->uid = 0, first_new_seq = 188, records = 187 dovecot: 2008-04-06 11:57:34 Error: child 20052 (imap) killed with signal 6 dovecot: 2008-04-06 11:57:35 Info: imap-login: Login: user=<phoebe>, method=PLAIN, rip=192.168.1.102, lip=192.168.1.254, TLS dovecot: 2008-04-06 11:57:35 Info: imap-login: Login: user=<thing>, method=plain, rip=192.168.1.101, lip=192.168.1.254, TLS dovecot: 2008-04-06 11:57:35 Error: IMAP(thing): seq = 186, rec->uid = 0, first_new_seq = 188, records = 187 dovecot: 2008-04-06 11:57:35 Error: child 20062 (imap) killed with signal 6 squirrelmail is also now dead.... Ideas please? regards Steven

2 4

Re: [Dovecot] Leave mail on server leads to dup messages
by Arliss Jameson 05 Apr '08

05 Apr '08

Yep, that was it! Though I use only one user for all mail, separate home dirs are still necessary. ----- Original Message ---- From: Arliss Jameson <arlissjameson(a)yahoo.com> To: Arliss Jameson <arlissjameson(a)yahoo.com>; dovecot(a)dovecot.org Sent: Friday, April 4, 2008 5:29:04 PM Subject: Re: [Dovecot] Leave mail on server leads to dup messages Of course right when I press send, I think of something that may be the cause :) It's precisely because they are sharing the same home that this ishappening, yes? If any of the other mbox's are downloaded, dovecotincrements the X-UID count and saves it in the home? Is that right? ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com

1 0

Re: [Dovecot] Leave mail on server leads to dup messages
by Arliss Jameson 05 Apr '08

05 Apr '08

Of course right when I press send, I think of something that may be the cause :) It's precisely because they are sharing the same home that this ishappening, yes? If any of the other mbox's are downloaded, dovecotincrements the X-UID count and saves it in the home? Is that right? ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com

1 0

[Dovecot] Leave mail on server leads to dup messages
by Arliss Jameson 05 Apr '08

05 Apr '08

Hi. I'm a dovecot newbie. I've set my pop client to leave messages on the server for 7 days. I'm downloading the same messages over and over as dovecot appears to be overwriting X-UID's in the mbox's. I can't think of any other program on the system that might write to the mbox other than postfix (and that program doesn't appear to be writing X-UID). My setup has one user (system account: vmail) that owns all mbox's. The user_query always returns vmail's home, uid and gid (you can view the SELECT's in the log snippet below).I have a total of four pop3 virtual mbox's. The example below illustrates what happens to one of them (though this problem extends to the others as well). Here's what happens: 1) Start with an empty mbox 2) Start dovecot 3) Download mail (received one email) cat mbox | egrep "X-UID:" X-UID: 789 4) Download mail again (received another email) cat mbox | egrep "X-UID:" X-UID: 789 X-UID: 790 5) Download mail once more (received three spam emails) cat mbox | egrep "X-UID:" X-UID: 811 X-UID: 812 X-UID: 813 X-UID: 814 X-UID: 815 What the?! 6) Check log dovecot: Apr 04 13:51:42 Info: auth(default): new auth connection: pid=12843 dovecot: Apr 04 13:51:42 Info: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=76.158.191.23 rip=44.156.77.13 resp=<hidden> dovecot: Apr 04 13:51:42 Info: auth-worker(default): sql(imacrawler(a)searchingforaddressestospam.com,44.156.77.13): query: SELECT CONCAT(username, '@', domain) AS user, password FROM (SELECT vuser.username, vuser.password, vdomain.name AS domain FROM vuser LEFT JOIN vdomain ON vuser.vdomain_id=vdomain.id) a WHERE a.username='imacrawler' AND a.domain='searchingforaddressestospam.com' dovecot: Apr 04 13:51:42 Info: auth(default): client out: OK 1 user=imacrawler(a)searchingforaddressestospam.com dovecot: Apr 04 13:51:42 Info: auth(default): master in: REQUEST 7 12837 1 dovecot: Apr 04 13:51:42 Info: auth-worker(default): sql(imacrawler(a)searchingforaddressestospam.com,44.156.77.13): SELECT '/vmail' AS home, CONCAT('mbox:~/mail:INBOX=/var/spool/vmail/', TRIM('searchingforaddressestospam.com'), '/', TRIM('imacrawler')) AS mail, 103 AS uid, 104 AS gid dovecot: Apr 04 13:51:42 Info: auth(default): master out: USER 7 imacrawler(a)searchingforaddressestospam.com home=/vmail mail=mbox:~/mail:INBOX=/var/spool/vmail/searchingforaddressestospam.com/ima… uid=103 gid=104 dovecot: Apr 04 13:51:42 Error: POP3(imacrawler(a)searchingforaddressestospam.com): mbox sync: Expunged message reappeared in mailbox /var/spool/vmail/searchingforaddressestospam.com/imacrawler (UID 789 < 796, seq=1, idx_msgs=0) dovecot: Apr 04 13:51:42 Info: pop3-login: Login: user=<imacrawler(a)searchingforaddressestospam.com>, method=PLAIN, rip=44.156.77.13, lip=76.158.191.23 dovecot: Apr 04 13:51:42 Error: POP3(imacrawler(a)searchingforaddressestospam.com): mbox sync: UID inserted in the middle of mailbox /var/spool/vmail/searchingforaddressestospam.com/imacrawler (796 > 789, seq=1, idx_msgs=5) dovecot: Apr 04 13:51:42 Error: POP3(imacrawler(a)searchingforaddressestospam.com): mbox sync: UID inserted in the middle of mailbox /var/spool/vmail/searchingforaddressestospam.com/imacrawler (801 > 789, seq=1, idx_msgs=5) dovecot: Apr 04 13:51:43 Error: POP3(imacrawler(a)searchingforaddressestospam.com): mbox sync: UID inserted in the middle of mailbox /var/spool/vmail/searchingforaddressestospam.com/imacrawler (806 > 789, seq=1, idx_msgs=5) dovecot: Apr 04 13:51:43 Info: POP3(imacrawler(a)searchingforaddressestospam.com): Disconnected: Logged out top=0/0, retr=5/9032, del=0/5, size=8947 I have no idea why it's complaining about 796 or where that number even came from. Much thanks for any help you can give. Here's my dovecot -n: # 1.0.13: /usr/local/etc/dovecot.conf log_path: /var/log/dovecot protocols: pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/pop3-login first_valid_uid: 103 last_valid_uid: 103 first_valid_gid: 104 last_valid_gid: 104 mail_privileged_group: vmail mail_executable: /usr/local/libexec/dovecot/pop3 mail_plugin_dir: /usr/local/lib/dovecot/pop3 pop3_uidl_format: %08Xu%08Xv auth default: verbose: yes debug: yes passdb: driver: sql args: /usr/local/etc/dovecot-sql.conf userdb: driver: sql args: /usr/local/etc/dovecot-sql.conf ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com

1 0

[Dovecot] Dovecot and stale nfs-locks hanging processes
by Søren Schrøder 05 Apr '08

05 Apr '08

Greetings dovecot mailing list. I have implemented a relatively big dovecot setup (250k users) and overall I am very pleased with dovecot functionality and performance. Setup description: * dovecot 1.0.x * FreeBSD 6.3 * Postfix (using dovecot deliver as LDA). * OpenLdap backend * Storage is NFS (Clariion EMC NFSd for Maildir, and FreeBSD NFSd for Indexes). * Locking is fcntl using RPC.lockd. * Users are accessing mail using POP3 and IMAP (IMAP mainly via Squirrelmail, but also direct) * 3 frontends for POP/SMTP and 2 frontends for IMAP (webmail). Round Robin DNS My problem: I am having issues where POP3, IMAP and DELIVER processes gets stuck, apparently waiting for device. fstat shows: bash# fstat -p 93522 USER CMD PID FD MOUNT INUM MODE SZ|DV R/W 302870 pop3 93522 root / 2 drwxr-xr-x 512 r 302870 pop3 93522 wd /home/mnt5 51592 drwxr-xr-x 80 r 302870 pop3 93522 text /usr 121619 -r-xr-xr-x 436616 r 302870 pop3 93522 0* internet stream tcp 302870 pop3 93522 1* internet stream tcp 302870 pop3 93522 2* pipe c778aa48 <-> c778a990 0 rw 302870 pop3 93522 3 /dev 24 crw-rw-rw- random r 302870 pop3 93522 5* pipe ce440b28 <-> ce440be0 0 rw 302870 pop3 93522 6* pipe ce440be0 <-> ce440b28 0 rw 302870 pop3 93522 7 /home/mnt5 9010290 -rw------- 1493 rw 302870 pop3 93522 8 - - bad - 302870 pop3 93522 9 - - bad - 302870 pop3 93522 10 - - bad And the inode in question on /home/mnt5 is a dot-nfs file, indicating stale lock: bash# ls -li | grep 9010290 9010290 -rw------- 1 302870 42 1493 Apr 3 18:05 .nfs.0668c236.6d524.4 ktrace on the pid shows absolutely no activity. The pop3 process is un-killable, and I end up stacking up pop3 processes from the user, as well as deliver to the user. Not healthy.. I was under the impression that POP3 would exit when a lock is set, preventing more than one pop3 processes pr. user, but it doesn't seem to be the case. Stopping dovecot entirely, leaves these stale pop3/imap/deliver processes hanging, even with shutdown_clients = yes The windows-problem-solution (reboot) seems to be the only way to get rid of the locked processes. So: Has anyone else observed this behavior, and eventually found the magic cure ? I wonder if there was a way to implement a "max wall-clock time" per dovecot process type (i.e.. terminate process after for example 120 sec. delivery, 600 sec pop3 etc...), as a crude "garbage-collector". Any hints/suggestions is welcome. -- Søren Schrøder

3 4

[Dovecot] LDAP auth_bind hangs and times out
by Jack McKinney 04 Apr '08

04 Apr '08

I have _almost_ got Dovecot working! One little snag... My users login using their email address as username. Each domain has their own LDAP subtree. Each user has an entry in the ou=users subtree of the domain subtree, and has a mail: field (inetOrgPerson) listing their email address/login name. I am trying to use auth_bind: when I login with jackmc(a)lorentz.com, dovecot should search for mail=jackmc(a)lorentz.com in the onelevel below ou=users,dc=lorentz,dc=com and find me as "cn=Jack McKinney,ou=users,dc=lorentz,dc=com". I have created an entry in LDAP (varmail) that should be able to do this query. Indeed, from the command line, it works: ldapsearch -h ldap.lrtz -b 'ou=users, dc=lorentz, dc=com' -D 'cn=varmail,ou=users,dc=lorentz,dc=com' -x -W -s onelevel '(&(objectClass=inetOrgPerson)(mail=jackmc(a)lorentz.com))' Enter LDAP Password: # extended LDIF # # LDAPv3 # base <ou=users, dc=lorentz, dc=com> with scope oneLevel # filter: (&(objectClass=inetOrgPerson)(mail=jackmc(a)lorentz.com)) # requesting: ALL # # Jack McKinney, users, lorentz.com dn: cn=Jack McKinney,ou=users,dc=lorentz,dc=com objectClass: top objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson cn: Jack McKinney givenName: Jack McKinney sn: McKinney mail: jackmc(a)lorentz.com # search result search: 2 result: 0 Success # numResponses: 2 # numEntries: 1 ' However, it appears that dovecot performs the above query successfully, but then never uses the password and retrieved DN to attempt to bind and authenticate the user. Instead, it just times out. My dovecot-ldap.conf is: hosts = ldap.lrtz dn = cn=varmail,ou=users,dc=lorentz,dc=com dnpass = ********* ldap_version = 3 auth_bind = yes pass_filter = (&(objectClass=inetOrgPerson)(mail=%Lu)) base = ou=users, dc=%Dd scope = onelevel The dovecot log shows: Apr 3 08:13:21 fourier dovecot: auth(default): new auth connection: pid=15774 Apr 3 08:13:30 fourier dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Isecured^Ilip=x.x.x.x^Irip=y.y.y.y^Iresp=<hidden> Apr 3 08:13:30 fourier dovecot: auth(default): ldap(jackmc(a)lorentz.com,y.y.y.y): bind search: base=ou=users, dc=lorentz,dc=com filter=(&(objectClass=inetOrgPerson)(mail=jackmc(a)lorentz.com)) Apr 3 08:16:30 fourier dovecot: imap-login: Disconnected: Inactivity: method=PLAIN, rip=y.y.y.y, lip=x.x.x.x, TLS The OpenLDAP log shows that the query is received and that it returns a match: Apr 3 08:13:30 fourier slapd[14039]: conn=7 op=3 SRCH base="ou=users,dc=lorentz,dc=com" scope=1 deref=0 filter="(&(objectClass=inetOrgPerson)(mail=jackmc(a)lorentz.com))" Apr 3 08:13:30 fourier slapd[14039]: conn=7 op=3 SRCH attr=uid Apr 3 08:13:30 fourier slapd[14039]: conn=7 op=3 SEARCH RESULT tag=101 err=0 nentries=1 text= When I do the query from the command line, there is an additional pair of lines: Apr 3 08:18:10 fourier slapd[16106]: conn=22 op=2 UNBIND Apr 3 08:18:10 fourier slapd[16106]: conn=22 fd=28 closed I thus conclude that Dovecot is not closing the connection. -- Jack McKinney GPG 1024D/99C6A174 jackmc(a)lorentz.com YM:lfaatsnat2006 AIM:jackmclorentz "There is no parameter that makes it impossible for you to perform still more excellently." -Mario Cuomo, on the lack of a clock in baseball

2 11

[Dovecot] "Dumb" proxying?
by Dan Bongert 04 Apr '08

04 Apr '08

I'm a database noob, and it really seems like it would be overkill for my setup: I just want to proxy all connections from my DMZ to my internal mail server -- same internal server for all users. I used to use perdition for this set up, but am having issues getting it to play nicely with my new servers. Can I bypass all of the SQL stuff and just have dovecot forward all POP/IMAP connections to a specific server? Or perhaps set up a wild card lookup in the database (preferably something serverless like sqlite) so that no matter the query, it'll return one server? I don't really want to add "database management" to my list of jobs I have to do, especially for ~1000 users, and when I don't handle user creation/deletion. -- Dan Bongert dbongert(a)ssc.wisc.edu

4 3

[Dovecot] How to force working of a redirect features in sieve plugin?
by Vitalij Satanivskij 04 Apr '08

04 Apr '08

Hello Trying to setup dovecot installation with sieve plugin, can't configure how to make redirect working. My setup 1 Exim + dovecot lda begin transports dovecot_virtual_delivery: driver = pipe command = /usr/local/dovecot/libexec/dovecot/deliver -d $local_part message_prefix = message_suffix = delivery_date_add envelope_to_add return_path_add log_output user = exim 2 Dovecot protocol lda { postmaster_address = postmaster@******* hostname = ********** mail_plugins = cmusieve mail_plugin_dir = /usr/local/dovecot/lib/dovecot/lda # Binary to use for sending mails. sendmail_path = "/usr/sbin/sendmail" # UNIX socket path to master authentication server to find users. auth_socket_path = /var/run/dovecot/auth-master } /usr/sbin/sendmail it's realy exim binary but I.m try full path to real exim - /usr/local/sbi/exim too. That's I.m getting in log files Mar 28 22:23:10 scorpio deliver(satan): Sending a forward to <*****@**********> with return path <<postmaster@******>> Mar 28 22:23:10 scorpio deliver(satan): Sendmail process terminated abnormally, signal 11 Mar 28 22:23:10 scorpio deliver(satan): sieve runtime error: Redirect: Error sending mail and in exim log 2008-03-28 22:23:10 1JfL6U-000LBj-24 <satan@********>: dovecot_virtual_delivery transport output: /libexec/ld-elf.so.1: environment corrupt; mi Question is - how deliver sending mail thru sendmail_path = "/usr/sbin/sendmail"? Via pipe? -- Vitalij Satanivskij

2 2

[Dovecot] outlook2007 shows frequent imap disconnect no matter what outlook-idle setting in dovecot.conf
by Kielbasiewicz, Peter 04 Apr '08

04 Apr '08

Hello, I saw the problem quite often in various posts but could not find a real solution . Problem is that I frequently get annoying popups from outlook 2007 about imap idle timeouts which block working with outlook until the popup is acknowledged. The popup says: Your IMAP server closed the connection. This can occur if you leave the connection idle for too long. Protocol: IMAP Server: testhost Port: 143 Error Code: 0x800CCCDD I tried to run dovecot with or without "imap_client_workarounds = outlook-idle" but do not see any difference. I am running dovecot on Red Hat Enterprise Linux Client release 5.1 (Tikanga). Below is the output of some commands to get a clue about my config. Background info: Our primary mailboxes are on exchange servers. As there is a size limit on the server mailboxes I am evaluating a local storage solution for our users. Thus I set up an additional mailbox in outlook using IMAP. Local .pst files can not be backuped easily (especially when outlook is running) and I am investigating a local IMAP server where users can move their mails to. This server can easily be backuped (even incrementally when using Maildir) and users do always have access to their mails. The drawbacks are that users must have an extra login to the imap server because I have no ldap access to the company AD server from our local site domain. The solution will not be accepted though if I can not prevent the frequent disconnect popups. Peter #dovecot --version 1.0.rc15 #dovecot -n # /etc/dovecot.conf protocols: imap imaps login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login mail_location: maildir:~/Maildir maildir_copy_with_hardlinks: yes auth default: passdb: driver: pam userdb: driver: passwd # tail /var/log/messages Mar 26 06:45:28 testhost dovecot: imap-login: Login: user=<peter>, method=PLAIN, rip=::ffff:130.143.81.176, lip=::ffff:130.143.83.92 Mar 26 06:46:01 testhost dovecot: IMAP(peter): Disconnected: Logged out Mar 26 06:46:01 testhost dovecot: IMAP(peter): Disconnected Mar 26 07:15:31 testhost dovecot: imap-login: Login: user=<peter>, method=PLAIN, rip=::ffff:130.143.81.176, lip=::ffff:130.143.83.92 Mar 26 07:15:31 testhost dovecot: imap-login: Login: user=<peter>, method=PLAIN, rip=::ffff:130.143.81.176, lip=::ffff:130.143.83.92 Mar 26 07:16:04 testhost dovecot: IMAP(peter): Disconnected Mar 26 07:16:04 testhost dovecot: IMAP(peter): Disconnected Mar 26 07:40:13 testhost dovecot: imap-login: Login: user=<peter>, method=PLAIN, rip=::ffff:130.143.81.176, lip=::ffff:130.143.83.92 Mar 26 07:40:13 testhost dovecot: imap-login: Login: user=<peter>, method=PLAIN, rip=::ffff:130.143.81.176, lip=::ffff:130.143.83.92 Mar 26 07:40:39 testhost dovecot: IMAP(peter): Disconnected

6 6

[Dovecot] Confusion of Sieve filter scripts and the file separator. (Amatuer Siever)
by Jack 04 Apr '08

04 Apr '08

Hello, I have just been playing around with sieve filters to split up all my incoming mail into the correct directories. I have created some subdirectories to put mailing list emails in and just want to check if my thinking is correct. I am using namespaces with the '/' character as the separator. When creating the fileinto line on my sieve scripts I thought I would have to use the '/' character to separate the folders (as horde mail also does), but that doesn't work (and produces a "Invalid folder" error) instead I must use the '.' character. I am using the dovecot deliver module and managesieve for my sieve stuff (dovecot 1.0.13). I am just wondering if this is the correct behaviour or if it is a bug of sorts. Cheers. From, Jack

2 1

[Dovecot] Dovecot config
by Dien Phan 04 Apr '08

04 Apr '08

Hi, I've installed dovecot 1.0.13 on FreeBSD 6.3 RELEASE and now trying to configure it. Below is my config file: $ dovecot -n # 1.0.13: /usr/local/etc/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log protocols: imap ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login mail_location: maildir:~/Maildir dotlock_use_excl: yes maildir_copy_with_hardlinks: yes mail_plugins: antispam imap_client_workarounds: delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep auth default: verbose: yes passdb: driver: checkpassword args: /var/MailRoot/bin/dovecot_xmail userdb: driver: static args: uid=vxmail gid=vxmail home=/var/MailRoot/domains/%d/%n allow_all_users=yes socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vxmail plugin: antispam_signature: X-DSPAM-Signature antispam_trash: Trash antispam_spam: SPAM antispam_dspam_binary: /usr/local/bin/dspam antispam_dspam_args: --user;%u We are using a web mail software that allows users to login either as us 'abc' or 'abc@domain'. The problem is: when a user logs in as 'abc' (without domain part) dovecots creates a directory /var/MailRoot/domains/abc and check mail there (as I understand because %d is blank). My question is how to config dovecot so it automatically add default domain %d is blank. Thank you for help. Dien Phan

3 2

Re: [Dovecot] shared Sent and Junk folders {Scanned}
by Tolga 04 Apr '08

04 Apr '08

Scott Silva wrote: > on 4-2-2008 11:51 PM Tolga spake the following: >> Scott Silva wrote: >> >>> on 4-2-2008 4:01 AM Tolga spake the following: >>> >>>> Charles Marcus wrote: >>>> >>>>> On 4/2/2008 3:38 AM, Tolga wrote: >>>>> >>>>>> For some odd reason, two of my users share the same Sent and Junk >>>>>> folders, therefore I keep getting errors about Sent folder reading >>>>>> permissions and one user reading the other user's Junk folder. What >>>>>> can I do about this odd problem? >>>>>> >>>>> Do you really think anyone can even guess what might cause something >>>>> like this based on the information given? >>>>> >>>>> How about some hints, like: >>>>> >>>>> dovecot version, platform, output of dovecot -n, and maybe even - >>>>> gasp - some log entries given when these users are experiencing the >>>>> problem... >>>>> >>>> Dovecot version is 1.0.7, on Linux gentoo, below is dovecot -n >>>> >>>> log_path: /var/log/dovecot.log >>>> info_log_path: /var/log/dovecot.log >>>> listen: [::] >>>> ssl_cert_file: /etc/ssl/dovecot/server.pem >>>> ssl_key_file: /etc/ssl/dovecot/server.key >>>> disable_plaintext_auth: no >>>> login_dir: /var/run/dovecot/login >>>> login_executable: /usr/libexec/dovecot/imap-login >>>> mail_extra_groups: mail >>>> mail_location: >>>> mbox:/var/mail/:INBOX=/var/mail/%u:INDEX=/var/mail/folders/%u >>>> >>> Here you need something like mbox:/var/mail/%u/ or mbox:/var/%u/mail/ >>> to keep all the users other mailboxes separate. >>> >> I did like you said, and now I get IMAP(tolga): open() failed with >> subscription file /var/mail/tolga/.subscriptions: Not a directory. btw, >> /var/mail/tolga is a file, but what I want is to have all the other >> folders in /var/mail/folders/tolga. Should I modify it like >> mbox:/var/mail/folders/%u/ ? >> >> > That should work. It indeed work, thanks :) > > -- > > Scott Silva > Network Administrator > San Gabriel Valley Water Company > 11142 Garvey Ave. El Monte CA 91733 > 626.448.6183 x.296 > ssilva(a)sgvwater.com > > > -- > This Message has been scanned for > viruses and dangerous content by > the San Gabriel Valley Water Co.MailScanner <http://www.mailscanner.info> > and is believed to be clean. > -- Stay with *nix :)

1 0

[Dovecot] Icedove (Thunderbird) crashes when reading IMAP messages
by Cam Ellison 04 Apr '08

04 Apr '08

This is a Debian lenny/sid installation. Dovecot has been installed on it for over a year, with no problems. Lately (i.e. the past few months), if I attempt to read a message, Icedove crashes. It does not do this when I read a message downloaded from the ISP's POP3 server (not that I do this very often - almost all my mail goes through Dovecot). I am now having to read email with KMail, but cannot send from it - that's another story. Googling for the past month or so reveals nothing: there seems to be no bug filed for this, and indeed I think it is an odd communication problem with dovecot that has not been seen before. Has anyone any experience with this, or any ideas how I should go about resolving it? I have not done so (because I don't know how to use the data, not being a coder), but can run strace and/or valgrind on icedove if that will help. Thanks in advance Cam -- Cam Ellison Ph.D. R.Psych. #01417 Cam Ellison & Associates Ltd. Management Psychology 3446 Beach Avenue Roberts Creek BC V0N 2W2 Phone: 604.885.4806 Fax: 604.885.4809 Cell: 604.989.0635

5 9

[Dovecot] shared Sent and Junk folders
by Tolga 03 Apr '08

03 Apr '08

Hi, For some odd reason, two of my users share the same Sent and Junk folders, therefore I keep getting errors about Sent folder reading permissions and one user reading the other user's Junk folder. What can I do about this odd problem? Regards, Tolga -- Stay with *nix :)

4 5

[Dovecot] How to fetch mails in Spam dir by MUA via POP3?
by Zhang Huangbin 03 Apr '08

03 Apr '08

Hi, all. How can i fetch mails in Spam directory by MUA (Such as Thunderbird) via POP3? Thanks very much. -- Best Regards. Zhang Huangbin - OpenBSD 4.2 -release, i386. - RHEL 5.1 Client

4 3

[Dovecot] Lmtp between hosts? (postfix/dovecot/ldap)
by k bah 02 Apr '08

02 Apr '08

I have 2 hosts: (a) - dovecot-1.0.5-6 - postfix-2.4.5-20 -> It's not the mx record for the domain, just holds the mailboxes -> Postfix uses LDAP for user lookup, dovecot too. -> Works ok if I set it to be the final mail destination, with Cyrus and Dovecot LDA (mailbox_transport). -> Has no domain associated (dns) with this ip address (b) - postfix-2.3.2-28 -> Has the mx record for that domain, has ip address that the domain points to. (users @ domain.org) -> Works ok if I install dovecot and set the mailbox_transport to be on this machine, both with dovecot and cyrus. What I'm trying to do: Have host (b) to receive mails for that domain, and by setting it's transport_maps to be /etc/postfix/transport, and there (tranport maps) point to host (a), using ltmp: "domain.org lmtp:ip_address_machine_A:24" ("domain.org lmtp:inet:ip_address_machine_A:24" does not work, gives me "fatal: valid hostname or network address required in server description: inet:ip_address_machine_A:24") Both machines have /etc/services with lmtp to port 24 tcp/udp. http://www.postfix.org/transport.5.html was not so clear to me. Ok, when I took out the "inet" part on the transport maps file, it connected to the host (a), which has this on master.cf: "machine_A_ip_address:24 inet n - n - - lmtp" it "worked", since machine (b) (received the mail and has mx record) delivered the mail to machine (a) (holds mailboxes, runs dovecot), but that stopped, machine (b) connects to port 24 on machine (a), and stays there, connected, without saying nothing (sniffed it). When I kill the connection (kill postfix on machine (a)), machine (b) complains on the log file: postfix/lmtp[704]: msg_id: to=<xx(a)xx.yy>, relay=machine_A[machine_A]:24, delay=223, delays=0.08/0.01/223/0, dsn=4.4.2, status=deferred (lost connection with machine_A[machine_A] while receiving the initial server greeting). -- questions -- I don't know if I'm doing things wrong (configuration error) or the wrong thing (should try other ways), so my questions: 1) Is this setup going to work ever, or it's wrong to try to get it to work? I want to hold mailboxes on a different host, and now I got to use dovecot (in case I hear: "try it with cyrus instead" =o)). 2) Viewing from the machine that receives the mail, and has mx record, the transport should be lmtp, right? Since it's now a matter of "delivery". Postfix: <...> -> <qmgr> -> (<local> or <smtp> or <pipe>) When using lmtp, I'm in <local>?? I mean, to get the message to the other machine (just mailboxes, no mx) I SHOULD USE LMTP(?) 3) Viewing from the machine holding the mailboxes, is there a way to make dovecot listen on that port? Or should I continue to use Postfix, and use postfix on this machine to deliver to dovecot (dovecot lda config works ok if using 1 and only 1 machine for everything - mx record, mailboxes). With Cyrus I talked lmtp directly, Postfix receives the mail and uses lmtp to talk to cyrus, using a unix socket. If anyone replies to the topic, and the discussion goes deeper on some of the alternatives, I paste my configs and come with further details, since what's working isolated I didn't paste here. Previous tests with just Cyrus or Dovecot on 1 machine setup worked, so I think it would just "bloat" the mail with information. thanks = -- Powered by Outblaze

3 2

[Dovecot] Alert when quota is warning
by Nicolas Letellier 02 Apr '08

02 Apr '08

Hello. Is it exist a plugin to alert when a POP/IMAP account has a warning quota (like 90%)? Or, do you know a solution to do it? The alert could be an email sent. Thanks. - Nicolas.

1 0

[Dovecot] Outlook cant connect to POP server.
by "Fábio M. Catunda" 02 Apr '08

02 Apr '08

Hi, I'm having a weir situation with MS Outlook and dovecot. I'm using POP for some users, some can connect, others cant. With tcpdump I got this packet coming from client to server: 2008-03-31 18:30:20.913718 IP (tos 0x0, ttl 128, id 1082, offset 0, flags [DF], proto: TCP (6), length: 48) 192.168.12.9.1072 > 192.168.5.124.110: S, cksum 0x90db (correct), 2564735473:2564735473(0) win 65535 <mss 1460,nop,nop,sackOK> E..0.:@...c.... ...|.0.n........p............... But the server never give an answer. I don't have any idea why the server do not answer, in error.log and info.log I got nothing. Dovecot version: 1.0.rc15-2etch3 (Debian package) And those are the workarrounds that I enabled: pop3_client_workarounds = outlook-no-nuls oe-ns-eoh I'm kind of lost, any tip is appreciated! Thanks!

2 1

[Dovecot] stalling on LOGIN
by Brandon Keepers 01 Apr '08

01 Apr '08

I'm getting strange timeouts occasionally on Dovecot 1.0.rc15 on Debian 4.0, and haven't been able to figure out the cause. $ ./src/imaptest user=test%d(a)imaptest.com host=localhost pass=foo mbox=~/dovecot-crlf - select=0 Logi Logo 100% 100% 2 4 7/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 0 0 10/ 10 - 3 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 4 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 5 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 6 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 7 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 8 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 9 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 10 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 11 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" - 12 stalled for 16 secs in command: 2 LOGIN "test1(a)imaptest.stage.dealerflow.com " "test" Eventually, I get: Error: test18(a)imaptest.stage.dealerflow.com[6]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test43(a)imaptest.stage.dealerflow.com[10]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test19(a)imaptest.stage.dealerflow.com[9]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test40(a)imaptest.stage.dealerflow.com[8]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test44(a)imaptest.stage.dealerflow.com[3]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test26(a)imaptest.stage.dealerflow.com[7]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test38(a)imaptest.stage.dealerflow.com[4]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test32(a)imaptest.stage.dealerflow.com[1]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test95(a)imaptest.stage.dealerflow.com[5]: Unexpected BYE: * BYE Disconnected for inactivity. Error: test25(a)imaptest.stage.dealerflow.com[2]: Unexpected BYE: * BYE Disconnected for inactivity. $ sudo /usr/sbin/dovecot -n # /etc/dovecot/dovecot.conf protocols: imap listen: *:143 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login first_valid_uid: 8 last_valid_uid: 8 mail_location: maildir:/var/mail/%1d/%d/%1n/%n mail_debug: yes auth default: mechanisms: plain login debug: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf socket: type: listen client: master: path: /var/run/dovecot/auth-master mode: 432 user: mail group: mail # dovecot-ldap.conf hosts = localhost:389 dn = cn=admin,dc=example,dc=com dnpass = secret auth_bind = yes auth_bind_userdn = uid=%n,ou=people,associatedDomain= %d,o=accounts,dc=example,dc=com ldap_version = 3 base = dc=example.com,dc=com user_filter = (mail=%u) user_global_uid = mail user_global_gid = mail I've tried enabling all the debugging, but there don't seem to be any errors. Any ideas? Thanks, Brandon

3 3

[Dovecot] v1.1.rc4 released
by Timo Sirainen 01 Apr '08

01 Apr '08

http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc4.tar.gz http://dovecot.org/releases/1.1/rc/dovecot-1.1.rc4.tar.gz.sig I didn't have time/energy to fix everything I wanted, so it'll probably be a few more RCs left until v1.1.0. This is anyway an important release, because it fixes two buffer overflows in search code which have been in all v1.1 releases (but not v1.0). Really stupid mistakes, I must have been tired or something when writing the code.. Anyway I now added code to notice these kind of buffer overflows when they happen (if --enable-debug is used), so hopefully these will be the last ones. * Fixed two buffer overflows in str_find_init(). It was used by SEARCH code when searching for headers or message body. Added code to catch these kind of overflows when compiling with --enable-debug. Found by Diego Liziero. + LDAP: Added debug_level and ldaprc_path settings (OpenLDAP-only) + Squat: Added fts_squat = partial=n full=m settings. See the wiki. - dbox metadata updating fixes. - quota: backend=n didn't work - SEARCH RECENT may have returned non-recent messages if index files were created by v1.0. - If mailbox was opened as read-only with EXAMINE, STOREs were permanently saved. - LDAP: Templates were somewhat broken (by richs at whidbey.net)

2 1

[Dovecot] FreeBSD port: port's patch for 1.1rc3
by Geoffroy Desvernay 01 Apr '08

01 Apr '08

For those who wants testing 1.1rc3 on FreeBSD, this is a simple patch against /usr/ports/mail/dovecot. To apply: # cd /usr/ports/mail/dovecot # patch -p1 < /tmp/patch_dovecot_1.0.13-1.1.rc3.diff Hope I did not forget something important... This is an adaptation of the existing port. PS: for port's maintainer: Which way will take 1.0 vs 1.1 upgrade ? a new mail/dovecot10 port or ? Hope this helps -- Geoffroy Desvernay diff -bruN dovecot-1.0.13/Makefile dovecot/Makefile --- dovecot-1.0.13/Makefile 2008-04-01 14:41:12.000000000 +0200 +++ dovecot/Makefile 2008-04-01 14:29:33.000000000 +0200 @@ -7,9 +7,9 @@ # PORTNAME= dovecot -DISTVERSION= 1.0.13 +DISTVERSION= 1.1.rc3 CATEGORIES= mail ipv6 -MASTER_SITES= http://www.dovecot.org/releases/1.0/ +MASTER_SITES= http://www.dovecot.org/releases/1.1/rc/ MAINTAINER= robin(a)isometry.net COMMENT= Secure and compact IMAP and POP3 servers diff -bruN dovecot-1.0.13/distinfo dovecot/distinfo --- dovecot-1.0.13/distinfo 2008-04-01 14:41:12.000000000 +0200 +++ dovecot/distinfo 2008-04-01 14:43:56.000000000 +0200 @@ -1,3 +1,3 @@ -MD5 (dovecot-1.0.13.tar.gz) = 281bd9dee8d6c1674977257acc80ce64 -SHA256 (dovecot-1.0.13.tar.gz) = 16da29b2bc08d0178a09323bf0787a2a0e953075655566a7b4b6b148c87ac25f -SIZE (dovecot-1.0.13.tar.gz) = 1774025 +MD5 (dovecot-1.1.rc3.tar.gz) = eed10a2f5142ebdf88276c0a82f548e1 +SHA256 (dovecot-1.1.rc3.tar.gz) = 5a72318a6f4d12a1da7104de94b439a8523142c0f54af1f1ff64966820ef9460 +SIZE (dovecot-1.1.rc3.tar.gz) = 2222329 diff -bruN dovecot-1.0.13/files/patch-dovecot-example.conf dovecot/files/patch-dovecot-example.conf --- dovecot-1.0.13/files/patch-dovecot-example.conf 2008-04-01 14:41:12.000000000 +0200 +++ dovecot/files/patch-dovecot-example.conf 2008-04-01 14:38:52.000000000 +0200 @@ -1,5 +1,5 @@ ---- dovecot-example.conf.orig 2008-03-04 05:48:12.000000000 +0000 -+++ dovecot-example.conf 2008-03-05 22:49:08.554336095 +0000 +--- dovecot-example.conf.orig 2008-04-01 14:30:50.000000000 +0200 ++++ dovecot-example.conf 2008-04-01 14:38:28.000000000 +0200 @@ -12,7 +12,7 @@ # Default values are shown for each setting, it's not required to uncomment # any of the lines. Exception to this are paths, they're just examples with @@ -15,9 +15,9 @@ #protocols = imap imaps +protocols = %%PROTOCOLS%% - # IP or host address where to listen in for connections. It's not currently - # possible to specify multiple addresses. "*" listens in all IPv4 interfaces. -@@ -210,6 +212,7 @@ + # A space separated list of IP or host addresses where to listen in for + # connections. "*" listens in all IPv4 interfaces. "[::]" listens in all IPv6 +@@ -213,6 +214,7 @@ # <doc/wiki/MailLocation.txt> # #mail_location = @@ -25,7 +25,7 @@ # If you need to set multiple mailbox locations or want to change default # namespace settings, you can do it by defining namespace sections. -@@ -256,6 +259,7 @@ +@@ -273,6 +275,7 @@ # used only for creating mbox dotlock files when creation fails for INBOX. # Typically this is set to "mail" to give access to /var/mail. #mail_privileged_group = @@ -33,7 +33,7 @@ # Grant access to these supplementary groups for mail processes. Typically # these are used to set up access to shared mailboxes. Note that it may be -@@ -320,6 +324,7 @@ +@@ -339,6 +342,7 @@ # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no @@ -41,7 +41,7 @@ # Valid UID range for users, defaults to 500 and above. This is mostly # to make sure that users can't log in as daemons or other system users. -@@ -333,6 +338,7 @@ +@@ -352,6 +356,7 @@ # belongs to supplementary groups with non-valid GIDs, those groups are # not set. #first_valid_gid = 1 @@ -49,7 +49,7 @@ #last_valid_gid = 0 # Maximum number of running mail processes. When this limit is reached, -@@ -506,19 +512,19 @@ +@@ -501,19 +506,19 @@ protocol imap { # Login executable location. @@ -73,7 +73,7 @@ # Maximum IMAP command line length in bytes. Some clients generate very long # command lines with huge mailboxes, so you may need to raise this if you get -@@ -528,7 +534,7 @@ +@@ -527,7 +532,7 @@ # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = @@ -82,15 +82,15 @@ # Send IMAP capabilities in greeting message. This makes it unnecessary for # clients to request it with CAPABILITY command, so it saves one round-trip. -@@ -563,6 +569,7 @@ +@@ -562,6 +567,7 @@ # accept '/' suffix in mailbox names in subscriptions list. # The list is space-separated. - #imap_client_workarounds = outlook-idle -+ imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep + #imap_client_workarounds = ++ imap_client_workarounds = delay-newmail netscape-eoh tb-extra-mailbox-sep } ## -@@ -571,11 +578,11 @@ +@@ -570,11 +576,11 @@ protocol pop3 { # Login executable location. @@ -104,15 +104,7 @@ # Don't try to set mails non-recent or seen with POP3 sessions. This is # mostly intended to reduce disk I/O. With maildir it doesn't move files -@@ -621,6 +628,7 @@ - # installations. - # - #pop3_uidl_format = -+ pop3_uidl_format = %08Xu%08Xv - - # POP3 logout format string: - # %t - number of TOP commands -@@ -635,7 +643,7 @@ +@@ -634,7 +640,7 @@ # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = @@ -121,7 +113,7 @@ # Workarounds for various client bugs: # outlook-no-nuls: -@@ -646,6 +654,7 @@ +@@ -645,6 +651,7 @@ # missing. This option simply sends it if it's missing. # The list is space-separated. #pop3_client_workarounds = @@ -129,20 +121,24 @@ } ## -@@ -663,10 +672,11 @@ +@@ -662,7 +669,7 @@ # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = - #mail_plugin_dir = /usr/lib/dovecot/lda + #mail_plugin_dir = %%PREFIX%%/lib/dovecot/lda + # If user is over quota, return with temporary failure instead of + # bouncing the mail. +@@ -677,6 +684,7 @@ + # Binary to use for sending mails. #sendmail_path = /usr/lib/sendmail + sendmail_path = /usr/sbin/sendmail - # UNIX socket path to master authentication server to find users. - #auth_socket_path = /var/run/dovecot/auth-master -@@ -677,7 +687,7 @@ + # Human readable error message for rejection mails. Use can use variables: + # %n = CRLF, %r = reason, %s = subject, %t = recipient +@@ -691,7 +699,7 @@ ## # Executable location @@ -151,7 +147,7 @@ # Set max. process size in megabytes. #auth_process_size = 256 -@@ -783,7 +793,7 @@ +@@ -814,7 +822,7 @@ #passdb passwd-file { # File contains a list of usernames, one per line @@ -160,7 +156,7 @@ #deny = yes #} -@@ -1021,7 +1031,7 @@ +@@ -1051,7 +1059,7 @@ # referenced using URIs in format "proxy:<name>". dict { @@ -169,21 +165,29 @@ } ## -@@ -1045,7 +1055,7 @@ - # directory. You can also optionally give a global ACL directory path where - # ACLs are applied to all users' mailboxes. The global ACL directory contains - # one file for each mailbox, eg. INBOX or sub.mailbox. -- #acl = vfile:/etc/dovecot-acls -+ #acl = vfile:%%PREFIX%%/etc/dovecot-acls +@@ -1099,7 +1107,7 @@ + # one file for each mailbox, eg. INBOX or sub.mailbox. cache_secs parameter + # specifies how many seconds to wait between stat()ing dovecot-acl file + # to see if it changed. +- #acl = vfile:/etc/dovecot-acls:cache_secs=300 ++ #acl = vfile:%%PREFIX%%/etc/dovecot-acls:cache_secs=300 # Convert plugin. If set, specifies the source storage path which is # converted to destination storage (mail_location) when the user logs in. -@@ -1059,7 +1069,7 @@ +@@ -1118,14 +1126,14 @@ # until the message can be saved within quota limits. The configuration file # is a text file where each line is in format: <priority> <mailbox name> # Mails are first deleted in lowest -> highest priority number order - #trash = /etc/dovecot-trash.conf + #trash = %%PREFIX%%/etc/dovecot-trash.conf - # Lazy expunge plugin. Currently works only with maildirs. When a user - # expunges mails, the mails are moved to a mailbox in another namespace + # Expire plugin. Mails are expunged from mailboxes after being there the + # configurable time. The first expiration date for each mailbox is stored in + # a dictionary so it can be quickly determined which mailboxes contain + # expired mails. The actual expunging is done in a nightly cronjob, which + # you must set up: +- # dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool ++ # dovecot --exec-mail ext %%PREFIX%%/libexec/dovecot/expire-tool + #expire = Trash 7 Spam 30 + #expire_dict = db:/var/lib/dovecot/expire.db +

3 2

[Dovecot] deliver tries to compile already compiled sieve script
by Alexander Prinsier 01 Apr '08

01 Apr '08

Hello, I'm trying to setup dovecot with sieve support in a way where all sieve scripts are precompiled. All sieve scripts are in /var/cache/sieve/. I believe I discovered a bug here. I describe below how to reproduce it. Dovecot and the user that deliver runs as do not have write permission in /var/cache/sieve/. h01:/var/cache/sieve# ls -la total 16 drwxr-xr-x 2 ecp ecp 4096 Mar 31 21:32 . drwxr-xr-x 10 root root 4096 Mar 31 20:14 .. -rw-r--r-- 1 ecp ecp 88 Mar 31 21:32 mailtest1(a)domain.com.sieve -rw-r--r-- 1 ecp ecp 132 Mar 31 21:32 mailtest1(a)domain.com.sievec When deliver runs it logs this error: open(/var/cache/sieve/mailtest1(a)domain.com.sievec.tmp) failed: Permission denied This indicates deliver tries to compile the script, even though the compiled version already is there. To verify I tested another case. I make the compiled script immutable and I did a chmod 777 on /var/cache/sieve/. Then deliver logs this error: rename(/var/cache/sieve/mailtest1(a)domain.com.sievec.tmp, /var/cache/sieve/mailtest1(a)domain.com.sievec) failed: Operation not permitted And deliver created the file mailtest1(a)domain.com.sievec.tmp. Some relevant pieces of my dovecot.conf: protocol lda { mail_plugins = quota cmusieve ... } plugin { sieve = /var/cache/sieve/%u.sieve } Anyone can help me? Is this an error on my end, or really a bug? Alexander

2 3

[Dovecot] Dovecot 1.1rc3 crashes with Dbox + imap_quota plugin
by eric＠flerd.com 01 Apr '08

01 Apr '08

Version: Dovecot v1.1.rc3 OS: CentOS 5 running in OpenVZ CPU: x86_64 Was running fine with maildir and decided to get dbox a try. Test user created with a dbox mailstore backend and when a client logs in that tries to run a getquotaroot imap command the process SIGSEGV's. Have been able to narrow it down to dbox crashing against dict quota as well as dirsize. Maildir works just fine. example telnet session: ... 5 getquota * 5 NO Quota root doesn't exist. 6 getquotaroot inbox Connection closed by foreign host. ------ Got the backtrace from a coredump as well: Program terminated with signal 11, Segmentation fault. #0 0x0000000000463d99 in mail_index_get_header_ext (view=0x0, ext_id=2, data_r=0x7fff8ad72140, data_size_r=0x7fff8ad72138) at mail-index-view.c:550 550 view->v.get_header_ext(view, NULL, ext_id, data_r, data_size_r); ---- (gdb) bt full #0 0x0000000000463d99 in mail_index_get_header_ext (view=0x0, ext_id=2, data_r=0x7fff8ad72140, data_size_r=0x7fff8ad72138) at mail-index-view.c:550 No locals. #1 0x000000000044604c in dbox_sync_want_flush_dirty (mbox=0x2aaaaaae5cc8, close_flush_dirty_flags=true) at dbox-sync.c:262 hdr = <value optimized out> data = <value optimized out> data_size = <value optimized out> #2 0x0000000000446101 in dbox_sync_begin (mbox=0x0, ctx_r=0x7fff8ad72278, close_flush_dirty_flags=64, force=64) at dbox-sync.c:297 storage = (struct mail_storage *) 0x2aaaaaadb878 ctx = <value optimized out> sync_flags = <value optimized out> ret = <value optimized out> rebuild = <value optimized out> #3 0x00000000004468c8 in dbox_sync (mbox=0x0, close_flush_dirty_flags=64) at dbox-sync.c:396 sync_ctx = (struct dbox_sync_context *) 0x2aaaaaae5cc8 #4 0x000000000043f0c4 in dbox_storage_mailbox_close (box=0x0) at dbox-storage.c:312 mbox = <value optimized out> ret = <value optimized out> #5 0x00002aaaab62df50 in fts_mailbox_close (box=0x2aaaaaae5cc8) at fts-storage.c:65 fbox = (struct fts_mailbox *) 0x2aaaaaae8f90 ret = <value optimized out> #6 0x00002aaaab42a5ed in cmd_getquotaroot (cmd=0x2aaaaaadc338) at imap-quota-plugin.c:98 storage = <value optimized out> box = (struct mailbox *) 0x0 iter = (struct quota_root_iter *) 0x0 root = <value optimized out> orig_mailbox = 0x2aaaaaae0518 "INBOX" mailbox = 0x49a6ca "INBOX" str = (string_t *) 0x2aaaaaacf1c0 #7 0x000000000041ab18 in client_command_input (cmd=0x0) at client.c:546 client = (struct client *) 0x2aaaaaadbf50 command = <value optimized out> __PRETTY_FUNCTION__ = "client_command_input" #8 0x000000000041abb9 in client_command_input (cmd=0x2aaaaaadc338) at client.c:595 client = (struct client *) 0x2aaaaaadbf50 command = (struct command *) 0x7fff8ad72140 __PRETTY_FUNCTION__ = "client_command_input" #9 0x000000000041b32f in client_handle_input (client=0x2aaaaaadbf50) at client.c:636 _data_stack_cur_id = 3 ret = <value optimized out> remove_io = <value optimized out> handled_commands = false #10 0x000000000041b54f in client_input (client=0x2aaaaaadbf50) at client.c:691 cmd = <value optimized out> output = (struct ostream *) 0x2aaaaaadc1e8 bytes = 27 __PRETTY_FUNCTION__ = "client_input" #11 0x0000000000486a38 in io_loop_handler_run (ioloop=<value optimized out>) at ioloop-epoll.c:201 ctx = <value optimized out> event = (const struct epoll_event *) 0x2aaaaaad7dc0 list = (struct io_list *) 0x2aaaaaad8780 io = (struct io_file *) 0x2aaaaaadc280 tv = {tv_sec = 1799, tv_usec = 999598} events_count = <value optimized out> t_id = 2 msecs = <value optimized out> ret = 1 i = 0 call = <value optimized out> #12 0x0000000000485d1d in io_loop_run (ioloop=0x2aaaaaad7b60) at ioloop.c:301 No locals. #13 0x0000000000422871 in main (argc=<value optimized out>, argv=0x0, envp=0x7fff8ad72578) at main.c:293 No locals. ---------- Let me know if there's any other info you need.

1 0

Re: [Dovecot] Wrong UIDs returned from mailbox_transaction_commit_get_uids()
by Ron Avriel 01 Apr '08

01 Apr '08

> > > > It should be: > > > > int mailbox_transaction_commit(struct mailbox_transaction_context **t) > > { > > uint32_t tmp1, tmp2, tmp3; > > > > return mailbox_transaction_commit_get_uids(t, &tmp1, &tmp2, &tmp3); > > } > > How/where does this help? The tmp values are ignored in any case, so I > don't think this is the right fix for it. > The problem occurs if transaction_commit() is hooked. In mail_log plugin I wanted to print the committed UIDs. I changed mail_log_transaction_commit() to: { ... ret = lbox->super.transaction_commit(t, uid_validity_r, first_saved_uid_r, last_saved_uid_r); if (0 == ret) { i_info("uid_validity=%u, first_uid=%u, last_uid=%u", *uid_validity_r, *first_saved_uid_r, *last_saved_uid_r); } return ret; } the result was: Apr 1 14:59:37 ha-test1 deliver(test1(a)test.com): uid_validity=1202218363, first_uid=1202218363, last_uid=1202218363 These values are equal to the UID validity. After changing mailbox_transaction_commit() as described above, I got correct values: Apr 1 15:09:50 ha-test1 deliver(test1(a)test.com): uid_validity=1202218363, first_uid=139, last_uid=139 Ron ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com

1 0

[Dovecot] Segfault with soft disk quota
by Tim Boyer 01 Apr '08

01 Apr '08

RHEL 5.1, dovecot 1.0.rc15 on a x86 system. dovecot -n says [root@dg mail]# dovecot -n # /etc/dovecot.conf protocols: pop3 pop3s login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/pop3-login login_process_size: 64 first_valid_uid: 100 mail_executable: /usr/libexec/dovecot/pop3 mail_plugin_dir: /usr/lib64/dovecot/pop3 auth default: passdb: driver: pam userdb: driver: passwd I had one user whose Outlook kept giving disconnection problems. I looked at the logs, and found this: Mar 31 14:05:31 dg.denmantire.com dovecot: POP3(bfarner): open(/home/bfarner/Mail/.imap/INBOX/.temp.dg.denmantire.com.4668.564b08eac94 4fe4a) failed: Disk quota exceeded Mar 31 14:05:31 dg.denmantire.com dovecot: POP3(bfarner): Fixed index file /home/bfarner/Mail/.imap/INBOX/dovecot.index: log file sync pos 2,115528 -> 3, 24 Mar 31 14:05:31 dg.denmantire.com dovecot: POP3(bfarner): Fixed index file /home/bfarner/Mail/.imap/INBOX/dovecot.index: messages_count 3 -> 0 Mar 31 14:05:31 dg.denmantire.com dovecot: pop3-login: Login: user=<bfarner>, method=PLAIN, rip=192.168.0.37, lip=192.168.0.2 Mar 31 14:05:31 dg.denmantire.com pop3[4668]: segfault at 0000000000000000 rip 00000000004452e8 rsp 00007fff56ccd460 error 4 Mar 31 14:05:31 dg.denmantire.com dovecot: child 4668 (pop3) killed with signal 11 Strange thing is - he's over disk quota, but just over the soft quota - nowhere close to the hard quota. Easy for me to fix, but I figured I'd also submit it as a bug. I don't follow the list so if you need any more info, please copy my email on the reply. Thanks... -- Tim Boyer Chief Technology Officer Denman Tire Corporation

2 1

[Dovecot] Bug in db-ldap.c with Dovecot1.1rc3
by richs＠whidbey.net 01 Apr '08

01 Apr '08

If using LDAP as a userdb with a "quota_rule" configured, the order of the LDAP entry can distort userdb results, depending on where the quota attribute is found. For instance, with this "dovecot-ldap.conf" snippet: user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,quotaKb=quota_rule=*:storage=%$ And this example LDAP entry: dn: uid=testuser,ou=people,dc=domain.com uid: testuser homeDirectory: /mail/testuser gidNumber: 100 cn: testuser quotaKb: 20480 uidNumber: 121212 When db_ldap_result_iterate_next_all() runs, "quotaKb" is encountered, which causes "ctx->template" to be set. On the next iteration, "uidNumber" is encountered, but "ctx->template" is still set, causing the "uid" value to be prepended with "*:storage=". This is reflected by an error in the log as: Invalid UID value '*:storage=121212' This can be fixed by adding a line after 1118 to src/auth/db-ldap.c: ctx->template = NULL; Hope this is helpful to someone, -Rich

2 1

[Dovecot] Wrong UIDs returned from mailbox_transaction_commit_get_uids()
by Ron Avriel 01 Apr '08

01 Apr '08

Hi, Wrong UIDs are returned from mailbox_transaction_commit_get_uids() in dovecot-1.1.rc3. The problem is in: int mailbox_transaction_commit(struct mailbox_transaction_context **t) { uint32_t tmp; return mailbox_transaction_commit_get_uids(t, &tmp, &tmp, &tmp); } It should be: int mailbox_transaction_commit(struct mailbox_transaction_context **t) { uint32_t tmp1, tmp2, tmp3; return mailbox_transaction_commit_get_uids(t, &tmp1, &tmp2, &tmp3); } After this fix it works OK. Thanks, Ron ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com

2 1

[Dovecot] public folders fchown error
by junk＠mc1.mccarthy.ac 01 Apr '08

01 Apr '08

I was hoping this would be the right place to look for some help, I cannot make public folders get the right permissions. I continually get the fchown error in logs, and have googled high an low to find multiple solutions that do not work for me. I'm using maildir. I have sendmail with postfix distributing my mail. I created maildir's in each users personal directory. I then thought it would be neat to set up a public folder that people could dump spam and ham into, then have a cron script go through the directory and automatically sort it for bayes. However, when I put a file in the public folder, the permissions do not seem to work. I've put a dovecot-shared file with root.mail permissions, 660, in just about every directory (all the public folder directories, and every personal user's control and index location), I've chmod'd to 777 each file and folder to test, etc, and no matter what, the dovecot.index.tmp in the user's index folder comes through with their permissions, and this error shows up. Am I thinking this is something different then what it is or am I completely off base? Thanks in advance, Bob dovecot 1.0.13 (debian install) # 1.0.13: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_privileged_group: mail mail_location: maildir:/home/%u/Mail/Inbox umask: 7 mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv namespace: type: public separator: / prefix: Public/ location: maildir:/var/mail/public:CONTROL=~/Mail/public/public:INDEX=~/Mail/public/index namespace: type: private separator: / inbox: yes auth default: mechanisms: plain login passdb: driver: pam userdb: driver: passwd

4 7

[Dovecot] Setting for deleting old messages from Trash?
by David Rosenstrauch 31 Mar '08

31 Mar '08

Hi. Just switched to Dovecot from Courier last week and have been very pleased so far. The conversion was extremely painless, and I only hit a few small configuration issues before I was able to get the server up and running. Since then, I've been quite pleased - Dovecot's been very stable, and a good bit faster than courier as well. However, there's one nice feature from courier that I used to use that it doesn't seem like Dovecot provides. Wanted to see if that was indeed the case and, if so, if there was any workaround. In Courier, there was a setting whereby the server would automatically delete messages in the Trash once they were of a certain age. (The default was 7 days.) However, looking through the dovecot.conf, it didn't appear that Dovecot had any comparable setting. Anyone know how I might achieve this with Dovecot? TIA, DR

2 3

[Dovecot] mbox with sub-folders and messages?
by Richard Lefebvre 31 Mar '08

31 Mar '08

Hi, Is it possible to have dovecot configured to use mbox format and yet have folders that contains sub-folders and messages? I'm thinking of a simple setup where any files directory with extension .sbd are presented to the IMAP client without the extension. So if you have a mbox file named BOX01 and a directory name BOX01.sdb would show has one on the client side (note: that is the way Thunderbird keeps it's mail locally). I know that the Maildir format does the sub-folders+messages, but I'm not really interested by the one file per email. Richard

3 3

Re: [Dovecot] outlook2007 shows frequent imap disconnect no matterwhat, outlook-idle setting in dovecot.conf
by Javier García 31 Mar '08

31 Mar '08

Hello all, I configured imap_client_workarounds = outlook-idle after a customers complaint (Windows Vista, Outlook 2007) and after a week, she reports me that the issue has never repeated. So it has worked for me. I am running 1.0.rc15 (as from the original post) on a Debian etch box. Regards, Javier > Message: 2 > Date: Mon, 31 Mar 2008 07:34:00 +0200 > From: "Kielbasiewicz, Peter" <peter.kielbasiewicz(a)philips.com> > Subject: Re: [Dovecot] outlook2007 shows frequent imap disconnect no > matterwhat outlook-idle setting in dovecot.conf > To: "dovecot(a)dovecot.org" <dovecot(a)dovecot.org> > Message-ID: > <042A6AAA4FA2494FB87EC7AE1FE227AD629BB94850(a)nlamsexm01.connect1.local> > Content-Type: text/plain; charset="iso-8859-1" > > > I updated to the latest rev from atrpms.net which is 1.0.13 and I see the same behaviour. > No matter if I set "imap_client_workarounds = outlook-idle" or "imap_client_workarounds =" I get those disconnect popups. It seems that the setting has no effect. > > Is there someone who had success by applying the setting with outlook 2007? > > Peter > > > > >> -----Original Message----- >> From: dovecot-bounces+peter.kielbasiewicz=philips.com(a)dovecot.org >> [mailto:dovecot-bounces+peter.kielbasiewicz=philips.com@dovecot.org] On >> Behalf Of Samuel HAMEAU >> Sent: Freitag, 28. M?rz 2008 11:11 >> Cc: dovecot(a)dovecot.org >> Subject: Re: [Dovecot] outlook2007 shows frequent imap disconnect no >> matterwhat outlook-idle setting in dovecot.conf >> >> Scott Silva a ?crit : >> >>> on 3-26-2008 1:33 AM Kielbasiewicz, Peter spake the following: >>> >>>> Hello, >>>> I saw the problem quite often in various posts but could not find a >>>> real solution . >>>> Problem is that I frequently get annoying popups from outlook 2007 >>>> about imap idle timeouts which block working with outlook until the >>>> popup is acknowledged. >>>> >>>> The popup says: >>>> Your IMAP server closed the connection. This can occur if you leave >>>> the connection idle for too long. >>>> Protocol: IMAP >>>> Server: testhost >>>> Port: 143 >>>> Error Code: 0x800CCCDD >>>> >>>> I tried to run dovecot with or without "imap_client_workarounds = >>>> outlook-idle" but do not see any difference. >>>> I am running dovecot on Red Hat Enterprise Linux Client release 5.1 >>>> (Tikanga). >>>> Below is the output of some commands to get a clue about my config. >>>> >>>> Background info: >>>> Our primary mailboxes are on exchange servers. >>>> As there is a size limit on the server mailboxes I am evaluating a >>>> local storage solution for our users. >>>> Thus I set up an additional mailbox in outlook using IMAP. >>>> Local .pst files can not be backuped easily (especially when outlook >>>> is running) and I am investigating a local IMAP server where users >>>> >> can >> >>>> move their mails to. This server can easily be backuped (even >>>> incrementally when using Maildir) and users do always have access >>>> >> to >> >>>> their mails. >>>> The drawbacks are that users must have an extra login to the imap >>>> server because I have no ldap access to the company AD server from >>>> >> our >> >>>> local site domain. >>>> The solution will not be accepted though if I can not prevent the >>>> frequent disconnect popups. >>>> >>>> Peter >>>> >>>> >>>> #dovecot --version >>>> 1.0.rc15 >>>> >>> First try upgrading to a more current version. 1.0.rc15 has got to be >>> >> a >> >>> year old by now. You can get a newer rpm at atrpms.net. >>> >>> >> I do have the same problem with dovecot 1.0.10 : disconnection popups >> with Outlook 2003/2007 with this kind of line in the logs: >> dovecot: 2008-03-26 15:16:01 Info: IMAP(user): Connection closed: >> Connection reset by peer >> >> sam >> > > > ------------------------------ > > _______________________________________________ > dovecot mailing list > dovecot(a)dovecot.org > http://dovecot.org/cgi-bin/mailman/listinfo/dovecot > > End of dovecot Digest, Vol 59, Issue 78 > *************************************** >

1 0