- dovecot - dovecot.org

[Dovecot] Possible to run two dovecot accessing same directory?
by Simon Gao 25 Jul '07

25 Jul '07

Hi, Just wonder if it's possible to run two dovecot servers on two different machines, but serve out of the same directories. I would like to test second dovecot server before switching from first one to second one. Any suggestions? Simon

2 1

Re: [Dovecot] Can't connect to auth server at default: Resource temporarily unavailable
by Sergey A. Kobzar 24 Jul '07

24 Jul '07

Hi bob, Tuesday, July 24, 2007, 2:30:24 PM, you wrote: > auth default { > mechanisms = plain login > userdb passwd { > args = blocking=yes ^^^^^^^^^^^^^^^^^^^ - try comment this. > } > passdb pam { > args = dovecot > } > user = dovecot-auth > } http://wiki.dovecot.org/WhyDoesItNotWork >> But 'dovecot -n' will be more useful. > dovecot doesn't seem to like "-n" It must work. # "dovecot -n" command gives a clean output of the changed settings. Use it # instead of copy&pasting this file when posting to the Dovecot mailing list. >> Which service do you use to authenticate users? > saslauthd from cyrus Sorry, I don't use it, but I think the problem is there. -- Sergey

4 7

[Dovecot] Sieve Vacation Auto-Reply Exclusions
by Bruce Bodger 24 Jul '07

24 Jul '07

The Dovecot Wiki is quite clear regarding its vacation auto-reply mechanism http://wiki.dovecot.org/LDA/Sieve and under what circumstances the automatic replies will NOT be sent. However, is it possible to manually add a list of envelope senders that the script will not respond to? Thank you, B. Bodger

2 1

[Dovecot] Can't connect to auth server at default: Resource temporarily unavailable
by bob passendon 24 Jul '07

24 Jul '07

Hello! What do the following messages mean? Jul 24 13:07:20 box dovecot: pop3-login: Can't connect to auth server at default: Resource temporarily unavailable Jul 24 13:07:20 box dovecot: imap-login: Can't connect to auth server at default: Resource temporarily unavailable Jul 24 13:07:20 box dovecot: pop3-login: Can't connect to auth server at default: Resource temporarily unavailable Jul 24 13:07:22 box dovecot: imap-login: Can't connect to auth server at default: Resource temporarily unavailable Jul 24 13:07:25 box dovecot: pop3-login: Can't connect to auth server at default: Resource temporarily unavailable I am running 1.0.beta3-3ubuntu5.5 on Ubuntu Dapper LTS. Thanks.

2 1

[Dovecot] Shared folder
by Jon Essen-Moller 24 Jul '07

24 Jul '07

Hi, I wish to setup a shared folder where everyone can read and copy. How does that work? Does each user get their own index file to determine weather a mail i read or not? can users move or copy mail? Thanks in advance Best regards - Jon

6 20

Re: [Dovecot] Ideas for Webmail/OTP
by Joakim Ryden 23 Jul '07

23 Jul '07

On Mon, July 23, 2007 10:54 am, Phillip T. George wrote: [...] > Oh...also his post did include "/OTP", which unless I'm mistaken, than means Off-Topic Post ..so it doesn't really matter if it had to do with Dovecot or not, right? :) :-) I believe he was referring to One Time Passwords. --Jo

2 1

[Dovecot] Dovecot using more than one NIC
by Andrew Petrushanco 23 Jul '07

23 Jul '07

I'm am trying to run dovecot on a Fedora 6 Install with multiple IP's but Dovecot (POP3) seems to only function correctly on the 1st NIC/IP. It seems to be responding OK if you telnet to the 2nd or 3rd IPs, but Email clients timeout. >From dovecot.conf protocol pop3 { listen = *:110 } Any suggestions please? Andrew

2 1

[Dovecot] Dovecot don't compile
by Sam Przyswa 22 Jul '07

22 Jul '07

Hi, I try to compile Dovecot with the *Ubuntu* patched sources but I got this error during the compilation: ./.libs/libsieve.a(script.o): In function `sieve_script_parse': /src/dovecot-1.0.rc17/dovecot-sieve/src/libsieve/script.c:140: undefined reference to `yylineno' ./.libs/libsieve.a(sieve.o): In function `sieveerror': /src/dovecot-1.0.rc17/dovecot-sieve/src/libsieve/sieve.y:568: undefined reference to `yylineno' I have bison-1.35, tried with flex but it's the same !? I would like to apply the ManageSieve server patch (http://dovecot.org/list/dovecot/2007-March/021130.html) I already send this mail on the Ubuntu list but don't got a reply. Thanks in advance for your help. Sam. -- Ce message a été vérifié par MailScanner pour des virus ou des polluriels et rien de suspect n'a été trouvé.

1 0

[Dovecot] Sieve server in python
by Sam Przyswa 22 Jul '07

22 Jul '07

Hi, I'm testing Dovecot to migrate from my old Courier IMAP/POP server. It work fine but I have some problems to start the sieve server "pysieved" from Neale Pickett in PAM auth, I got the message: Traceback (most recent call last): File "/usr/share/pysieved/pysieved.py", line 97, in <module> main() File "/usr/share/pysieved/pysieved.py", line 60, in main None, None, True) File "/usr/share/pysieved/auth/pam.py", line 22, in <module> import PAM ImportError: No module named PAM What's wrong ? Thanks in advance for your help. Sam. -- Ce message a été vérifié par MailScanner pour des virus ou des polluriels et rien de suspect n'a été trouvé.

4 4

[Dovecot] v1.1.alpha1 released
by Timo Sirainen 21 Jul '07

21 Jul '07

http://dovecot.org/releases/1.1/alpha/dovecot-1.1.alpha1.tar.gz http://dovecot.org/releases/1.1/alpha/dovecot-1.1.alpha1.tar.gz.sig This is the first alpha release of Dovecot v1.1. I hope that it stabilizes into final release within a few months. There are a lot of new features since v1.0. The most important ones are listed at the end of this post. This is the only v1.1.alpha announcement I send to dovecot-news list (or to www.dovecot.org news). The next one probably will be v1.1.rc1. I've been stress testing the code a lot and I've also been using it myself for almost a year, so I think this release should actually be quite stable and usable. But since I haven't tested everything, there might be some crashes and misbehaving commands. So this release should now have all the major features that I intend to add to v1.1 (except for dbox rewrite, see below). Some smaller features will still be added. The rest of the major features in my previous v1.1 list will go to v1.2. While v1.1 is getting stabilized I'm beginning to rewrite dbox code. Its code is isolated from the rest of Dovecot, so it can't destabilize anything else. Hopefully it will be ready before v1.1 release, although maybe still marked as experimental. Some of the features might not be considered quite ready yet: - Mailbox list indexes improve STATUS performance a lot (maybe 7x) when mailboxes haven't changed. Handling updates however is a lot slower than I'd want (2x with one client, more with multiple), so you may want to disable them with mailbox_list_index_disable=yes until the update performance gets better. - THREAD code is completely rewritten with support for incremental updates and index files. I tested it last year and it seemed OK, but I didn't dare try it now so I wouldn't have to delay this alpha if it was broken :) I'll do some more testing soon, but for now be careful with using v1.1 with webmails. - SORT code also uses indexes now, but it's a lot simpler so it probably works. - Squat indexes work and I'm using them myself, but they'll be rewritten for v1.2 with a new faster format. - Although Dovecot now flushes NFS attribute/data caches when needed, I'm not sure if it's done in all the necessary places. - I don't remember if I've tested expire plugin at all. So, the largest changes I've added to NEWS file (which BTW won't contain changes between alphas/betas/rcs, those will be only in my mailing list posts): * After Dovecot v1.1 has modified index or dovecot-uidlist files, they can't be opened anymore with Dovecot versions earlier than v1.0.2. * Empty passwords in passdb doesn't allow user to log in with any password anymore. To do that you'll also need to set nopassword extra field. + IMAP: Added support for UIDPLUS and LIST-EXTENDED extensions. + IMAP SORT: Sort keys are indexed, which makes SORT commands faster. + IMAP THREAD: Threads are indexed into a dovecot.index.thread file. It can usually be updated incrementally, so this makes THREAD fast. + Added Dovecot-specific X-REFERENCES2 threading algorithm. It's similar to REFERENCES, but it doesn't do base subject merging and it sorts the threads by their newest message. + When saving messages, update cache file immediately with the data that we expect client to fetch later. Maildir-only currently. + NFS attribute and data caches are are flushed whenever needed. See mail_nfs_storage and mail_nfs_index settings. + Mailbox list indexes. Mailbox metadata is stored there, so STATUS commands can return synchronized mailboxes' metadata simply by reading a single mailbox list index file. Currently works only with Maildir++ layout. + Out of order command execution (SEARCH, FETCH, LIST), nonstandard command cancellation (X-CANCEL <tag>) + Expire plugin can be used to keep track of oldest messages in specific mailboxes. A nightly run can then quickly expunge old messages from the mailboxes that have them. The tracking is done using lib-dict, so you can use either Berkeley DB or SQL database. + Namespaces are supported everywhere now. + Full text search indexing support with Lucene and Squat backends. + OTP and S/KEY authentication mechanisms (by Andrey Panin). + mbox and Maildir works with both Maildir++ and FS layouts. You can change these by appending :LAYOUT=maildir++ or :LAYOUT=fs to mail_location. + LDAP: Support templates in pass_attrs and user_attrs + Support for listening in multiple IPs/ports. + Quota plugin rewrite: Support for multiple quota roots, warnings, allow giving storage size in bytes or kilo/mega/giga/terabytes, per-mailbox quota rules.

9 22

[Dovecot] PLAIN.B64 Password Scheme Patch Missing in Dovecot 1.0.2
by imacat 21 Jul '07

21 Jul '07

Dear all, Hi. This is imacat from Taiwan. I've just downloaded the newly-released Dovecot 1.0.2, but found that the PLAIN.B64 password scheme patch seems to be missing. http://www.dovecot.org/list/dovecot/2007-May/022610.html Is there any reason for this? Thank you very much. -- Best regards, imacat ^_*' <imacat(a)mail.imacat.idv.tw> PGP Key: http://www.imacat.idv.tw/me/pgpkey.asc <<Woman's Voice>> News: http://www.wov.idv.tw/ Tavern IMACAT's: http://www.imacat.idv.tw/ TLUG List Manager: http://lists.linux.org.tw/cgi-bin/mailman/listinfo/tlug

2 2

[Dovecot] Slower than Courier-IMAP
by Nejc Škoberne 20 Jul '07

20 Jul '07

Hello, I have been running Courier-IMAP for while now, and I decided that I'd like to try Dovecot. This paper: http://student.iu.hio.no/~s132278/reports/disney_imap_maildir.pdf says that the performances are somewhat comparable, but my Dovecot "feels" slower than Courier-IMAP. I am using Maildirs and I have substantial amounts of emails in them. For example one of the folder has 26000 messages and to display a message it takes 6-7 seconds. Before it took only 2-3 seconds to display a message (in Thunderbird). I have tried to turn "fsync_disable" to yes, but the feeling is somewhat the same. What else can I try to tune? It's a FreeBSD 6.2 machine on a HP ProLiant ML350 with 2GB RAM and 120GB SATA disk and the Dovecot running in a FreeBSD jail. You can find my dovecot.conf here: http://pastebin.ca/627442 Thanks, Nejc

2 1

[Dovecot] Quota warning patch and config parsing in 1.0.2
by Doug Council 20 Jul '07

20 Jul '07

Dovecot 1.0.2 patches and compiles fine with the quota warning patch (http://www.dovecot.org/patches/quota-warning.patch) But, when parsing the configuration file , deliver now seems to strip all of the spaces in the QUOTA_WARNING environment variable, generating an error. This is the plugin{} section from my dovecot.conf: plugin { quota = maildir:storage=20480 quota_warning = storage=10% /usr/local/bin/quota-warning } And this is the error Dovecot generates for anyone with a quota: quota warning: No command specified: storage=10/usr/local/bin/quota-warning Doing a diff on src/deliver/deliver.c between 1.0.1 and 1.0.2 show some changes to how the config file is parsed, but nothing I can find that would cause the spaces to get stripped out of the configuration value. Has anyone successfully used the quota warning patch with 1.0.2? Thanks, -Doug

4 5

[Dovecot] telnet connection refused
by Neil Robins 20 Jul '07

20 Jul '07

I'm running Dovecot 1.0 with Postfix and Amavisd-new on FreeBSD 2.6-RELEASE. Mail was working OK until I put a new mailbox on but then it stopped. Dovecot appears to be running but it doesn't show up in "Top" nor when I run "ps -aucx". I also can't telnet to it on port 110 either at localhost or at the mail server (Connection refused). Can telnet to port 25 (Postfix) no problem. Any suggestions very much appreciated. I know this is an imap group but it's the only Dovecot group I could find. Thanks,

1 0

[Dovecot] fine-grained user authentication support
by Adam Jacob Muller 20 Jul '07

20 Jul '07

Hi, I'm wondering if it's possible to have some users restricted to only login via POP3 or only IMAP (likewise for IMAPS/POP3S). Returning a particular field with the userdb sql query (protocols=imaps did not work), perhaps setting up a different passdb? Is this possible with dovecot? -Adam

2 3

[Dovecot] errmsg question
by Stewart Dean 19 Jul '07

19 Jul '07

Am seeing: > Jul 19 14:59:19 mercury mail:err|error dovecot: IMAP(jab): dotlock /var/spool/mail/jab.lock was immediately delet > ed under us > Jul 19 14:59:19 mercury mail:err|error dovecot: IMAP(jab): file_lock_dotlock() failed with mbox file /var/spool/m > ail/jab: No such file or directory what does it mean, what should I be doing to alleviate or troubleshoot the problem? -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] sluggish updating of gnome mail-notification?
by Greg Troxel 19 Jul '07

19 Jul '07

Sorry if this is a repeat query. I am running dovecot 1.0.2 under NetBSD/i386 (3.1 and 4.0ish). I use maildirs, and deliver into them with procmail. For clients I use Gnus (CVS head) mostly and thunderbird, and also the gnome mail-notification status applet (4.0). Gnus fixed a bug in the last few months where exiting a group didn't unselect the folder and thus didn't necessarily push read marks back. Mostly everything works perfectly. When new mail arrives, thunderbird shows it as new/unread, gnus will find it with 'g', and mail-notification shows it as well. After reading it in gnus, when I exit the group (which pushes read marks to the IMAP server), thunderbird usually shows the message as read immediately, but often mail-notification waits for a while (up to about a minute) before withdrawing the new-mail notification. I just tried this and thunderbird was also slow in showing the mail read. marking the message read in thunderbird caused mail-notification to show the message as read, but with a 30s lag. mail-notification is supposed to use IDLE if available. Sometimes it withdraws new-mail claims at the right time. I know that I need to turn on debugging and trace all this. So I'm really just asking if anyone else has seen this or similar behavior.

2 1

[Dovecot] Performance question
by Stewart Dean 19 Jul '07

19 Jul '07

I now have Dovecot in production and things are apparently trouble-free. The one known problem is that initial client inbox load can take 30 seconds - 2 minutes. For instance: 'I got fed up waiting and went and got coffee'...this with a 3MB mbox inbox...and my mail server is a substantial machine consuming 25% CPU just for this person's IMAP session. I realize that a certain amount of performance piggishness is inevitable with large mbox inboxes (the prize goes to the user with a 500MB inbox). Eventually, I plan to move to maildir format, but for now I'm here. Also, we have legacy requirement for procmail, so I can't currently use deliver. Questions: 1) Any tuning I can do to improve this? 2) Any metrics, troubleshooting I should be doing to better characterize the problem? -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

3 2

[Dovecot] avoiding getting maildir cur/ folder contents?
by Johannes Berg 19 Jul '07

19 Jul '07

Hi, On my server with many mails in one folder and slow IO, getting the mail listing in the cur/ folder is becoming a serious bottleneck. Dovecot is the only thing accessing the mail folders, so would there be any way to avoid getting a listing all the time? johannes

3 8

[Dovecot] Small problem with src/lib/mountpoint.c [now with patch attached!]
by Mike Brudenell 19 Jul '07

19 Jul '07

Greetings - [SIGH: I hit the "Send" button instead of "Attach". Here's Take 2...] Whilst playing with getting quotas from NFS-mounted filestores I've just discovered a slight problem with src/lib/mountpoint.c I had things working on a Solaris 10 test machine which had the mailstore mounted 'normally' using an entry in /etc/vfstab. However when I changed to use the automounter for the mailstore obtaining the quota broke. The problem lies with mountpoint_get(). On a 'normally' mounted filestore this obtains the device_path of the remote filestore in the form remoteservername.some.domain:/remote/path However when the mailstore was automounted I was instead getting back auto_direct which is the name of the automounter map we're using. The /etc/mnttab file has TWO entries for the auto-mounted filestore, like this: auto_direct /mailstore/messages/p autofs direct,ignore,dev=4740014 1184648400 crypt2.york.ac.uk:/vol/vol9/p /mailstore/messages/p nfs proto=tcp,xattr,dev=4700386 1184668792 Although there are two entries they have different device numbers. The mountpoint_get() function attempts to guard against this by checking the device number obtained matches that of the path being located. However for some reason I don't understand when getmntent() returns the FIRST of the above two entries it supplies the device number of the SECOND. Thus the device numbers match in the mountpoint_get() test and it thinks it has found the correct entry. This leads to the device_path being set to the map name -- auto_direct -- instead of the host:/path My fix is to add an additional fstype for the test to ignore: "autofs". The loop skips over any such mounts (along with the existing tests for "swap" and "ignore"). I'm attaching my minimal patch in case it's of help to anyone else. (Timo: would it be possible to get this added into the distribution code if you agree it's right?) Cheers, Mike Brudenell -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

2 5

[Dovecot] Shared folders and LDAP?
by Gavin Henry 19 Jul '07

19 Jul '07

Dear All, Is it possible to store shared folder lists in an LDAP Directory along with your virtual users? Will check the wiki too. Thanks, Gavin. -- Kind Regards, Gavin Henry. Managing Director. T +44 (0) 1224 279484 M +44 (0) 7930 323266 F +44 (0) 1224 824887 E ghenry(a)suretecsystems.com Open Source. Open Solutions(tm). http://www.suretecsystems.com/

2 4

[Dovecot] assertion failed
by Ralf Hildebrandt 19 Jul '07

19 Jul '07

I'm getting these in my log: Jul 17 11:40:42 postamt dovecot: imap-login: file ssl-proxy-openssl.c: line 460 (ssl_proxy_new): assertion failed: (fd != -1) Jul 17 11:40:42 postamt dovecot: child 26581 (login) killed with signal 6 Jul 17 11:51:12 postamt dovecot: imap-login: file ssl-proxy-openssl.c: line 460 (ssl_proxy_new): assertion failed: (fd != -1) Jul 17 11:51:12 postamt dovecot: child 24406 (login) killed with signal 6 This is dovecot-1.0.2 -- is this something to worry about? -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) plonk(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de There are two ways to write error-free programs. Only the third one works.

2 4

[Dovecot] Integrating dovecot 1.01 into CentOS-3.8 systemw with chroot passwd dirs?
by Gary Goldberg 19 Jul '07

19 Jul '07

Hello. I'm administrating a CentOS 3.8 linux system (RHEL3) and I just replaced the imap-2002d-12 package that came with the system, with a dovecot 1.01 package I obtained through the dovecot home page. The problem I have, is that many of my POP3 users have jailed user accounts set up through wu-ftpd, where the dir field is of the form /home/group/./pop/user, and wu-ftpd chroots them from /home/group but then places them into their home directories, in this case /home/group/pop/user. dovecot can't seem to locate their mail directory. Can anyone offer any advice on this situation? Please respond to my email address <og at digimark.net> if you could. --- Here are some relevant stats: example user: lda01 home directory (in /etc/passwd: /home/lda/./pop/lda01 mail folder directory: /home/lda/pop/lda01/mail INBOX: /home/mail/lda01 (/var/mail, /var/spool/mail symlinked to /home/mail.) dovecot 1.01 output of dovecot -n: #1.0.1: /etc/dovecot.conf base_dir: /var/run/dovecot log_path: /var/log/dovecot.log protocols: imap imaps pop3 pop3s ssl_disable: yes ssl_cert_file: /usr/share/ssl/certs/dovecot.pem ssl_key_file: /usr/share/ssl/certs/dovecot.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: mail.digimark.net ready. valid_chroot_dirs: /var/mail:/var/spool/mail:/home/mail:/home mail_extra_groups: mail mail_location: mbox:~/mail:INBOX=/home/mail/%u mail_debug: yes mail_full_filesystem_access: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xv%08Xu auth default: passdb: driver: pam args: blocking=yes dovecot userdb: driver: passwd attempt to login using a Squirrelmail (webmail) client gave these entries in the dovecot.log error log: dovecot: Jul 12 16:22:50 Info: imap-login: Login: user=<lda01>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured dovecot: Jul 12 16:22:50 Info: IMAP(lda01): Effective uid=10572, gid=510, home=/pop/lda01 dovecot: Jul 12 16:22:50 Info: IMAP(lda01): mbox: data=/pop/lda01/mail:INBOX=/home/mail/lda01 dovecot: Jul 12 16:22:50 Info: IMAP(lda01): mbox: root=/pop/lda01/mail, index=/pop/lda01/mail, inbox=/home/mail/lda01 dovecot: Jul 12 16:23:04 Error: IMAP(lda01): open(/home/mail/lda01, O_CREAT) failed: No such file or directory dovecot: Jul 12 16:23:04 Error: IMAP(lda01): access() failed with mbox file /home/mail/lda01: No such file or directory dovecot: Jul 12 16:23:04 Error: IMAP(lda01): stat() failed with mbox file /home/mail/lda01: No such file or directory dovecot: Jul 12 16:23:58 Info: IMAP(lda01): Disconnected: Logged out -- -- "Outside of a dog, a book is a man's best friend. -- Inside of a dog, it is too dark to read." -- Groucho Marx. Gary Goldberg KA3ZYW <og(a)digimark.net> V:301/249-6501 F:301/390-1955 AIM:OgGreeb Digital Marketing/Bowie MD/Systems & Networks Consult <http://www.digimark.net/>

3 7

[Dovecot] production switchover questions
by Stewart Dean 19 Jul '07

19 Jul '07

So far so good...other than a my-bad fubar with the permission on the index directory that kept DC from creating index dirs for the entering-for-the-first-time users, quickly noticed (thanks to the excellent logging) and corrected. Some questions 1) the max_mail_processes parm in dovecot.conf...is that *all* processes owned by dovecot? 2) I thought there was a parm to limit how many processes each user can have, but can't seem to find it. Is there any way to control that? -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

[Dovecot] deleting maildir files
by Tom Bombadil 18 Jul '07

18 Jul '07

Greetings all... Can we delete maildir files directly from the file system? Basically, we use dovecot to train spam, and we want to delete messages that are older than 30 days, using a simple "find /maildirs -cname +30 -name *imap-server* -exec rm {} \;" I have seen a post a while ago saying that dovecot can rebuild the indexes, but I don't remember if it's when the index is deleted or when the maildir files are deleted. And if we cannot delete files with the 'rm' command, whats the best/proper way to delete these older files. Thanks

8 16

[Dovecot] A little OT but hopefully still related enough... Maildir Delivered mail naming problems.
by Jesse C. Smillie 18 Jul '07

18 Jul '07

Normally I wouldn't post off topic to a mailing list, but I have posted every where else I can think of and haven't had any success yet working this out. I know there has to be a few people here with extensive knowledge of how mail works and maybe just a tip in the right direction would help me out at this point. I have migrated from mbox format to Maildir format in the last week. I used the utility mb2md.pl to convert all of our existing emails from one system to the next. I then modified my /etc/procmailrc file by putting this at the top: MAILDIR=$HOME/Maildir DEFAULT=$MAILDIR/ This way procmail is forced to deliver to the new format as well. For the most part all of this is working perfectly. Procmail is delivering emails to their new proper folder and even extended rules in users own ~/.procmailrc are working well once the folder path was changed from $MAILDIR/whatever to $MAILDIR/.whatever/. Works great. I am using Dovecot 1.0.1 to deliver our email through the IMAP protocol and with the clients we support (Thunderbird and Outlook) things are working very well for us. So now to my problem. We also use Usermin for our users to access their email when they don't have a supported client available to them. When users look at their email with Usermin their emails are out of order regardless of weather I have Usermin's "Read Mail" module using IMAP to get mail or have it read the users Maildir directly. Sorts are just all jacked up. Sometimes if users then click the "Date" button to sort by date it snaps to; sometimes it don't. I currently have multiple posts on the Webmin/Usermin mailing list about this problem and it really seems to point back to the naming scheme of our emails now. All emails which were converted have the classic maildir format. UnixTime.PID.Server... 1183737827.002379.mbox:2,RS 1183737827.002388.mbox:2,RS 1183737827.002392.mbox:2,RSa 1183737827.002394.mbox:2,RS However, all the email that is delivered after the fact is different. They all look like this: _oTH.XqwlGB.gator:2,RS _p2F.qjVlGB.gator:2,RS _qQF.2mpjGB.gator:2,Sa _sK.8mTlGB.gator:2,RSa _uOG.gCtjGB.gator:2,RS _uxG.a6lkGB.gator:2,RS _vnF.n-2lGB.gator:2, _x9H.llckGB.gator:2, _z3G.k8klGB.gator:2,S _z5G.kAilGB.gator:2,RS I have been searching the net for a few hours and reading various documentation here and there and I haven't been able to find anything that tells me why my mail is being named this way or how to fix it. I can say that my test box which also runs 10.2 slamd also delivers this exact same way.... For the most part I'm being told that the reason why Usermin's sort is all screwed up (order wise) in IMAP mode is that messages are displayed in the order that the IMAP server reports them. Like wise in Maildir mode the order which they are read. I can understand why this naming stuff throws everything off at this point. What I don't understand is why its doing this. I mean I'm pretty sure there is nothing here out of the ordinary as far as my config. I have searched all over the net the last few days and haven't been able to find anything useful. So in wrap up sorry for being a little OT and thanks a head of time for any info or light anyone can share here. -Jesse Smillie

2 2

[Dovecot] some mail reappears or marked as read again
by Herbert Gasiorowski 17 Jul '07

17 Jul '07

Sometimes a mail - already read or moved into another folder - appears again in the INBOX. I was not quite sure about this but today is once close the mail client (thunderbird 2.0.0.4 on fedora 7) and the only mail in the inbox was mark as unread. I think it happens in other mailboxes too. But it might be a client problem as I changed to dovecot and thunderbird 2 (from 1.5) nearly at the same time - but i think it happens before with thunderbird 1.5 too). In the logs there is nothing but some logins/logout. (the "dovecot -n" is attached) # 1.0.1: /etc/dovecot.conf syslog_facility: local6 protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/pki/dovecot/certs/dovecot2.pem ssl_key_file: /etc/pki/dovecot/private/dovecot2.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 pop3_uidl_format: %08Xu%08Xv namespace: type: private separator: / location: mbox:~/Mail:INBOX=/var/spool/mailx/%u:INDEX=/export/dovecot/%u inbox: yes namespace: type: private separator: / prefix: FB12/home-temp/ location: mbox:~:INDEX=/export/dovecot/%u namespace: type: shared separator: / prefix: FB12/ location: mbox:/export/mailfb12:INDEX=/export/dovecot/%u auth default: passdb: driver: pam args: imap userdb: driver: passwd

1 1

[Dovecot] Small problem with src/lib/mountpoint.c
by Mike Brudenell 17 Jul '07

17 Jul '07

Greetings - Whilst playing with getting quotas from NFS-mounted filestores I've just discovered a slight problem with src/lib/mountpoint.c I had things working on a Solaris 10 test machine which had the mailstore mounted 'normally' using an entry in /etc/vfstab. However when I changed to use the automounter for the mailstore obtaining the quota broke. The problem lies with mountpoint_get(). On a 'normally' mounted filestore this obtains the device_path of the remote filestore in the form remoteservername.some.domain:/remote/path However when the mailstore was automounted I was instead getting back auto_direct which is the name of the automounter map we're using. The /etc/mnttab file has TWO entries for the auto-mounted filestore, like this: auto_direct /mailstore/messages/p autofs direct,ignore,dev=4740014 1184648400 crypt2.york.ac.uk:/vol/vol9/p /mailstore/messages/p nfs proto=tcp,xattr,dev=4700386 1184668792 Although there are two entries they have different device numbers. The mountpoint_get() function attempts to guard against this by checking the device number obtained matches that of the path being located. However for some reason I don't understand when getmntent() returns the FIRST of the above two entries it supplies the device number of the SECOND. Thus the device numbers match in the mountpoint_get() test and it thinks it has found the correct entry. This leads to the device_path being set to the map name -- auto_direct -- instead of the host:/path My fix is to add an additional fstype for the test to ignore: "autofs". The loop skips over any such mounts (along with the existing tests for "swap" and "ignore"). I'm attaching my minimal patch in case it's of help to anyone else. (Timo: would it be possible to get this added into the distribution code if you agree it's right?) Cheers, Mike Brudenell -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

1 0

[Dovecot] Problem with Dovecot SASL in Postfix
by Chris McMacken 16 Jul '07

16 Jul '07

Ok lets try this again... I'm trying to configure my postfix server to use Dovecot as an SASL server and running into some problems. My server supports a couple of domain, I have multiple user/password files for multiple domains to make the files a little easier to manage. Not sure if this question should belong in the dovecot mailing list or the postfix one, but here goes anyway. I have everything configured to use CRAM-MD5 authentication, including my mail client. Here is the Dovecot -n output: mail# dovecot -n # /usr/local/etc/dovecot.conf log_path: /var/log/dovecot info_log_path: /var/log/dovecot.info protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login verbose_proctitle: yes first_valid_gid: 0 mail_extra_groups: mail mail_location: maildir:/home/vmail/%d/%n mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain cram-md5 passdb: driver: passwd-file args: /usr/local/etc/dovecot/%d/passwd userdb: driver: passwd-file args: /usr/local/etc/dovecot/%d/passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: heres a sample line from one of the passwd files: chrism:{CRAM-MD5}a67a65704086a046b3f875d1eaac8cb5c6fd13406507fead30d9bcb1bf… and to login through SASL I am trying to use the username chrism(a)example.com when I use the full email address like this to login like this I get this output into my postfix log: Jul 10 18:46:59 mail postfix/smtpd[57343]: connect from unknown[12.244.148.123] Jul 10 18:46:59 mail postfix/smtpd[57343]: NOQUEUE: reject: RCPT from unknown[12.244.148.123]: 554 5.7.1 <chrism(a)gmail.com>: Relay access denied; from=<chrism(a)example.com> to=<chrism(a)gmail.com> proto=ESMTP helo=<[192.168.1.14]> Jul 10 18:47:00 mail postfix/smtpd[57343]: disconnect from unknown[12.244.148.123] (not actually using example.com but I changed it here) heres my smtpd_recipient_restricitons from postconf smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination, permit_sasl_authenticated so when I use the full user name (chrism(a)example.com) it doesn't appear to even attempt logging into the sasl server. If I change it to simply chrism, heres the output: Jul 10 18:50:36 mail postfix/smtpd[57356]: connect from unknown[12.244.148.123] Jul 10 18:50:38 mail postfix/smtpd[57356]: warning: unknown[12.244.148.123]: SASL CRAM-MD5 authentication failed: PDI3NjU4MTE4NDExMTQzN0BtYWlsPg== Jul 10 18:50:39 mail postfix/smtpd[57356]: lost connection after AUTH from unknown[12.244.148.123] Jul 10 18:50:39 mail postfix/smtpd[57356]: disconnect from unknown[12.244.148.123] if I put my user name in as chrism and don't add the @example.com it tried to login but it can't login. anyone have any ideas?

2 2

[Dovecot] Can't compile mbox-snarf-plugin.c on AIX 5.3
by Adnan Vatandas 16 Jul '07

16 Jul '07

Hello everyone, I tried to compile the mbox-snarf-plugin.c (downloaded today, so I assume it's the most recent version available) on AIX 5.3 with gcc 4.0. Building Dovecot 1.0.1 and 1.0.2 works fine. [root@aix root]# export DOVECOT=/root/dovecot-1.0.1 [root@aix root]# gcc -fPIC -shared -Wall -I$DOVECOT -I$DOVECOT/src/lib -I$DOVECOT/src/lib-storage -I$DOVECOT/src/lib-mail -I $DOVECOT/src/lib-imap -DHAVE_CONFIG_H mbox-snarf-plugin.c -o mbox_snarf_plugin.so ld: 0711-317 ERROR: Undefined symbol: .mailbox_sync_init ld: 0711-317 ERROR: Undefined symbol: .mailbox_sync_next ld: 0711-317 ERROR: Undefined symbol: .mailbox_sync_deinit ld: 0711-317 ERROR: Undefined symbol: .mailbox_transaction_begin ld: 0711-317 ERROR: Undefined symbol: .mailbox_search_init ld: 0711-317 ERROR: Undefined symbol: .mail_alloc ld: 0711-317 ERROR: Undefined symbol: .mailbox_copy ld: 0711-317 ERROR: Undefined symbol: .mail_expunge ld: 0711-317 ERROR: Undefined symbol: .mailbox_search_next ld: 0711-317 ERROR: Undefined symbol: .mail_free ld: 0711-317 ERROR: Undefined symbol: .mailbox_search_deinit ld: 0711-317 ERROR: Undefined symbol: .mailbox_transaction_rollback ld: 0711-317 ERROR: Undefined symbol: .mailbox_transaction_commit ld: 0711-317 ERROR: Undefined symbol: .mailbox_open ld: 0711-317 ERROR: Undefined symbol: .buffer_append_zero ld: 0711-317 ERROR: Undefined symbol: .buffer_get_space_unsafe ld: 0711-317 ERROR: Undefined symbol: .mailbox_close ld: 0711-317 ERROR: Undefined symbol: .mail_storage_set_critical ld: 0711-317 ERROR: Undefined symbol: .buffer_write ld: 0711-317 ERROR: Undefined symbol: .home_expand ld: 0711-317 ERROR: Undefined symbol: .p_strdup ld: 0711-317 ERROR: Undefined symbol: mail_storage_module_id ld: 0711-317 ERROR: Undefined symbol: hook_mail_storage_created ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information. collect2: ld returned 8 exit status [root@aix root]# Does this plugin work with Dovecot > 1.0 at all, is this a know bug or are there any users who managed to install it successfully on AIX? Sincerely Adnan

1 0

[Dovecot] Dict-server mysql module error
by Gabriele Fergola 16 Jul '07

16 Jul '07

hi all when i setup plugin quota by quota = dict: mysql:/etc/quota-dict.conf i get the folowing error: deliver(zzzz(a)zzzz.zz): Unknown dict module: mysql deliver(zzzz(a)zzz.zz): dict quota: dict_init() failed quota-dict.conf: connect = host=localhost dbname=zzzz user=zzzz password=zzzz table = mailbox select_field = quota where_field = maildir username_field = username dovecot.conf: # 1.0.2: /etc/dovecot//dovecot.conf base_dir: /var/run/dovecot/ protocols: imap pop3 imaps pop3s ssl_disable: yes disable_plaintext_auth: no shutdown_clients: no login_dir: /var/run/dovecot//login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login first_valid_uid: 5000 mail_location: maildir:/mbox/%d/%u/Maildir mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: pam passdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot-sql.conf socket: type: listen master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: mail plugin: quota: dict:storage=10240:messages=1000 mysql:/etc/dovecot-dict-quota.conf quota_warning: storage=80% /usr/local/bin/quota_warning.sh 80 dict: quota: mysql:/etc/dovecot-dict-quota.conf i applied the patch for quota warning message by nicolas. thank you in advance Workino

2 1

[Dovecot] Getting quotas from an NFS-mounted filestore
by Mike Brudenell 16 Jul '07

16 Jul '07

Greetings - I was just wondering what the state of play was with regard to reading filestore-based quotas when the mailstore is NFS-mounted? Timo mentioned a little while ago that he'd be including it: http://www.dovecot.org/list/dovecot/2007-May/022594.html However it isn't in 1.0.1 and isn't mentioned in the release notes for 1.0.2. Is it going to be a 1.1 feature or will it appear before then? I'm asking because although I can't get the rquota-rquotad patch to build on Solaris I have found some code on the net which does do RPC based quota lookups. I'm toying with the idea of trying to modify rquota-rquotad to use this other code. However this is out of my area of knowledge so it will be an uphill battle ... so if reading quotas from NFS-mounted filestores will be coming Real Soon Now I'll probably just wait instead. So any ideas as to timescales, please? Cheers, Mike B-) -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

1 0

[Dovecot] Dict-Server
by Gabriele Fergola 16 Jul '07

16 Jul '07

Hi, i try to use dict server but i recive this error: net_connect_unix(/usr/local/var/run/dovecot/dict-server) failed: Permission denied net_connect_unix(/usr/local/var/run/dovecot/dict-server) failed: Permission denied because i have dict-server in /var/run and not in /usr/local/var/run ..... Thank you in advance Workino

1 0

[Dovecot] quota warning - take 2
by Nicolas Boullis 16 Jul '07

16 Jul '07

Hi, About one month ago, I sent a patch to this list to implement warnings when a user is close to reach his quota. I tried to follow Timo's advice to improve my code, and here (at last) is a new patch. Things I did not fix: - This patch is still for dovecot 1.0, as I will need warnings with dovecot 1.0. I may rewrite it for CVS HEAD in the future but can't promise. - I'm still using system() rather than fork()+exec()+waitpid() since I don't know a good time to run waitpid(). Comments are welcome. Timo, will you consider to add this to your unofficial patches? Cheers, Nicolas Boullis

3 5

[Dovecot] v1.0.2 released
by Timo Sirainen 15 Jul '07

15 Jul '07

http://dovecot.org/releases/dovecot-1.0.2.tar.gz http://dovecot.org/releases/dovecot-1.0.2.tar.gz.sig Fixes several bugs. This release also adds compatibility with upcoming Dovecot v1.1 so it'll be possible to upgrade to v1.1 and back to v1.0.2 without anything breaking. * dbox isn't built anymore by default. It will be redesigned so it shouldn't be used. + Maildir: Support reading dovecot-uidlist (v3) files created by Dovecot v1.1. - Maildir: "UIDVALIDITY changed" errors could happen with newly created mailboxes - If "INBOX." namespace was used, LIST returned it with \HasNoChildren which caused some clients not to show any other mailboxes. - Maildir++ quota: If multiple processes were updating maildirsize at the same time, we failed with "Unknown error". - IMAP: IDLE didn't actually disconnect client after 30 minutes of inactivity. - LDAP passdb/userdb was leaking memory - deliver: %variables in plugin {} weren't expanded - deliver: Don't bounce the mail if Sieve plugin returns failure

2 2

[Dovecot] INBOX empty
by Mohamed Navas 15 Jul '07

15 Jul '07

Hi list, We have been using the mail server with postfix and dovecot IMAP. This is the second time we are facing the problem of inbox of some users are completely empty. Pls advice anyway to recover and to rectify the problem for such threat in future. Thanks, M.Navas Mob: +971 55 5973731

2 1

[Dovecot] How to stop POP clients from downloading mail after directory corruption
by Frank Church 15 Jul '07

15 Jul '07

Transferring my email from a Courier server, as well as some corruption in my dovecot installation caused all POP mails to be downloaded again. I surmised that the dovecot-uidlist file was not present in the first instance, and was probably out of sync in the second. Is there a way to do some reindexing and uid-list regeneration that can stop the problem from occurring? - Frank

2 1

[Dovecot] More Descriptive Logging Needed
by Joseph D. Wagner 15 Jul '07

15 Jul '07

(Everything herein refers to dovecot-1.0.1.) I'm sorry to say that I've been having troubles with dovecot. While attempting to troubleshoot them, I've found the existing logs to be lacking. In particular, I've had a lot of difficulty with the client<->server connection disconnecting, but the only message I get in the logs is "Disconnected". After dissecting the code a bit, I've found quite a number of places where the code will close the connection logging nothing more than the word "Disconnected", or worse, it will not specify a reason in which case the code in client_destroy() will log the default "Disconnected". Because of this, isolating the offending code has been a bit difficult. (I realize the problem may lie with the client, but I cannot even begin to program a work around until I isolate the exact place and cause of failure.) In an attempt to change the logging to be more descriptive myself, I already changed src/imap/cmd-fetch.c:85 on my own copy of dovecot from: client_disconnect(cmd->client, "Disconnected"); to: client_disconnect(cmd->client, "Disconnected in FETCH"); This makes the logging both more descriptive and more in line with other parts of code, like src/imap/cmd-append.c:50 which already say: client_destroy(client, "Disconnected in APPEND"); As luck would have it, my problem was not in the FETCH command. I'm now looking at the client_read() function in src/imap-login/client.c:318-334. If I'm reading the code right, then "i_stream_read(client->input)" returning "-1" means that the socket/stream is already disconnected, right? In other words, some function attempted to read off of a socket/stream that was already closed, right? If so, shouldn't the client_read() function not have been called in the first place? Please let me know if I'm wrong. I've been banging my head against the wall trying to make sense of all the different code. Any assistance you can offer would be appreciated. Joseph D. Wagner

2 1

[Dovecot] problem with subscriptions file version 1.0.1
by Liz 13 Jul '07

13 Jul '07

Hello, I am currently working on a patch to add IMAPdir support to dovecot. (For those who do not know, IMAPdir is exactly like Maildir except that instead of having a folder .foo it would just be foo. The advantage is that the file system is slightly easier to search through without the dot in front of the folders.) The first thing I did was get the configuration file working for Maildir. So I know that the problem has nothing to do with the configuration file. Next I looked through the actual source code to find any place where a dot might be added to the beginning of a folder. It transpired that there is a constant, MAILDIR_FS_SEP_S, which is assigned the value ".". I deleted all the occurrences of this constant, compiled the source code again, and ran into a rather interesting problem. When I try to create a new folder through Thunderbird on a separate machine, the folder is not visible unless I restart Thunderbird. I checked on the machine acting as a server and the folder is created and the subscriptions file is updated, and the dot at the beginning is indeed absent. So I see no reason why this should not work. If I had deleted some of the constants that ought not have been deleted, the subscriptions file would not be readable at all and I would not be able to see the folder when Thunderbird restarts. If there were some sort of deadlock going on with the subscriptions file, one would think that it would not be caused by deleting the constants. I would have run into the problem before editing any of the source code. I know for fact that the only thing different about my source code and the code available for downloading is the deleted constants. If anyone has any ideas, please let me know. If you need more information, please feel free to prompt me for it because I have no idea what might be useful that I have not already provided. Regards, Elizabeth Bermel

2 3

[Dovecot] telnet to dovecot not creating mbox
by Andy Fadich 13 Jul '07

13 Jul '07

Hi, Whenever I create a new email user, telnet fails until an email is sent to that user to create his mbox. This is the error that it gives. Anyone know how to fix this? I could create the email account script to touch the users mbox, but I havn't needed to do this in the past with ipop3d and dovecot on a different server. [root@mail log]# telnet localhost 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user testact +OK pass +OK Logged in. -ERR Internal error occurred. Refer to server log for more information. [2007-07-13 10:37:15] Connection closed by foreign host. Jul 13 10:33:43 mail dovecot: pop3-login: Login: user=<testact>, method=PLAIN, rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured Jul 13 10:33:43 mail dovecot: POP3(testlol): open(/var/spool/mail/testact, O_CREAT) failed: Permission denied Jul 13 10:33:43 mail dovecot: POP3(testlol): access() failed with mbox file /var/spool/mail/testact: No such file or directory Jul 13 10:33:43 mail dovecot: POP3(testlol): stat() failed with mbox file /var/spool/mail/testact: No such file or directory Jul 13 10:33:43 mail dovecot: POP3(testlol): Couldn't init INBOX: Internal error occurred. Refer to server log for more information. [2007-07-13 10:33:43] Jul 13 10:33:43 mail dovecot: POP3(testlol): Mailbox init failed top=0/0, retr=0/0, del=0/0, size=0 Andy

3 2

[Dovecot] Today's hg pull doesn't compile
by Ralf Hildebrandt 13 Jul '07

13 Jul '07

I get: Making all in auth make[3]: Entering directory /usr/src/dovecot/src/auth' rm -f libpassword.a ar cru libpassword.a mycrypt.o password-scheme.o password-scheme-md5crypt.o password-scheme-otp.o password-scheme-rpa.o ranlib libpassword.a gcc -DHAVE_CONFIG_H -I. -I../.. -I../../src/lib -I../../src/lib-sql -I../../src/lib-settings -I../../src/lib-ntlm -I../../src/lib-otp -DAUTH_MODULE_DIR=\""/usr/local/lib/dovecot/auth"\" -DPKG_LIBEXECDIR=\""/usr/local/libexec/dovecot"\" -std=gnu99 -fstack-protector -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT auth-request.o -MD -MP -MF .deps/auth-request.Tpo -c -o auth-request.o auth-request.c auth-request.c: In function ‘is_ip_in_network’: auth-request.c:874: error: ‘const union <anonymous>’ has no member named ‘ip6’ auth-request.c:875: error: ‘union <anonymous>’ has no member named ‘ip6’ make[3]: *** [auth-request.o] Error 1 make[3]: Leaving directory /usr/src/dovecot/src/auth' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory /usr/src/dovecot/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory /usr/src/dovecot' make: *** [all] Error 2 -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) plonk(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de Any technology sufficiently advanced is indistinguishable from magic.

2 2

[Dovecot] Maildir and Windows NFS server
by Julian Jimenez 13 Jul '07

13 Jul '07

Hi, I want to migrate form Courier to Dovecot. The problem is that our NFS server is a Windows server. We use Debian stable (Etch) and maildir. With Courier, we need to compile from the source, changing the parameter MDIRSEP from ":" to ";", because Windows cannot handle files with this character in their name. Anyone knows the name of the parameter in Dovecot that I need to change to do the same? Thanks in advance. Julián

2 1

[Dovecot] Dovecot login failing
by Richard Ellis 13 Jul '07

13 Jul '07

Fedora 7 Dovecot version 1.0.1 Hi All, I've been using a combination of getmail/Dovecot/Squirrelmail for a while now and its all been fine. However, last week when trying to demonstrate how to use Squirrelmail to my wife, her login failed. I then tried mine, which I had used many times before and it also fails. Looking in the logs, Dovecot appears to be trying to add a domain name against the login, instead of just checking that user against the UNIX logins of my machine. I thought at first this was because when I'm away from home, I use a no-ip address to access my mailserver, but it also fails when I'm in the house, or even on the server console. dovecot: Jul 12 12:04:56 Info: imap-login: Aborted login: user=< rick(a)servehttp.com>, method=PLAIN, rip=::ffff:127.0.0.1, lip=::ffff: 127.0.0.1, secured dovecot: Jul 12 12:10:00 Info: pop3-login: Login: user=<rick>, method=PLAIN, rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured Anybody any idea how to rectify this? I can't see an option in the /etc/dovecot.conf file to stop it and using auth_default_realm = doesn't seem to make any difference. If I telnet into dovecot using my local username and password, it works fine. Any advice would be most welcome before I break it fiddling. Thanks Rik -- The Truth is out there, does anyone have the URL?

5 5

[Dovecot] v1.0.2 release candidate
by Timo Sirainen 13 Jul '07

13 Jul '07

http://dovecot.org/tmp/dovecot-1.0.2-rc.tar.gz Unless someone finds something broken, I'll release v1.0.2 in a few days. The most important changes since v1.0.1: * dbox isn't built anymore by default. It will be redesigned so it shouldn't be used. + Maildir: Support reading dovecot-uidlist (v3) files created by Dovecot v1.1. - Maildir: "UIDVALIDITY changed" errors could happen with newly created mailboxes - If "INBOX." namespace was used, LIST returned it with \HasNoChildren which caused some clients not to show any other mailboxes. - Maildir++ quota: If multiple processes were updating maildirsize at the same time, we failed with "Unknown error". - IMAP: IDLE didn't actually disconnect client after 30 minutes of inactivity. - LDAP passdb/userdb was leaking memory - deliver: %variables in plugin {} weren't expanded

4 9

[Dovecot] Monitoring Recomendations
by Dehnert James Sr 13 Jul '07

13 Jul '07

I have a client that I have installed Dovecot 1.0.1 for is having some performance issues. Especially when using IMAP from various Outlook clients. I have TLS installed and all the IMAP connections are secured. I'm wondering is anyone has any recommendations for monitoring dovecot performance. I'd like to try and nail down where the real performance issues are. I suspect outlook, but I want to eliminate Dovecot as the cause of any problems, or, if I have a problem with Dovecot, I want to identify any issues I can and fix them. Thanks, Zeke -- James "Zeke" Dehnert mailto:jdehnert@norcalnetworks.com Phone: +1 707.546.6620 x602 Fax: +1 707.324.8043 "Life is racing, everything else is just waiting"

4 4

[Dovecot] dovecot sieve notify mailto
by Kupor Laszlo 13 Jul '07

13 Jul '07

Hello, I try to migrate to dovecot-lda from procmail, but some script can't run under lda cmusieve plugin. dovecot version: dovecot-1.0(debian) revelant config dovecot.conf: protocol lda { postmaster_address = postmaster(a)wizard.dunanet.hu hostname = wizard.dunanet.hu mail_plugin_dir = /usr/lib/dovecot/modules/lda #sendmail_path = /usr/lib/sendmail auth_socket_path = /var/run/dovecot/auth-master mail_plugins = cmusieve } .forward | "/usr/lib/dovecot/deliver" .dovecot.sieve (revelant part) require ["fileinto","notify"]; ... ... notify :method "mailto" :options "9141141(a)sms1.pgsm.hu" :id "test" :message; if true { keep; } ... I can compile with sievec, deliver also can compile to .dovecot.sievec (no errors) i can decompile with sieved: 1935: NOTIFY METHOD({6}mailto) ID({5}willy) OPTIONS {20}9141141(a)sms1.pgsm.hu PRIORITY(13) MESSAGE({17}$from$: $subject$) 1954: IF (ends at 1957)true 1957:JUMP 1960 1959: KEEP full len is: 1960 But notification does not work.. Jul 3 17:50:38 WiZARD deliver(willy): Loading modules from directory: /usr/lib/dovecot/modules/lda Jul 3 17:50:38 WiZARD deliver(willy): Module loaded: /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so Jul 3 17:50:38 WiZARD deliver(willy): mbox: data=/home/willy/mail/:INBOX=/var/mail/willy Jul 3 17:50:38 WiZARD deliver(willy): mbox: root=/home/willy/mail, index=/home/willy/mail, inbox=/var/mail/willy Jul 3 17:50:38 WiZARD deliver(willy): cmusieve: Using sieve path: /home/willy/.dovecot.sieve Jul 3 17:50:38 WiZARD deliver(willy): cmusieve: Executing script /home/willy/.dovecot.sievec Jul 3 17:50:38 WiZARD postfix/smtpd[15234]: disconnect from donci.dunanet.hu[62.77.204.40] Jul 3 17:50:38 WiZARD deliver(willy): msgid=<Pine.LNX.4.62.0707031750280.28802(a)donci.dunanet.hu>: saved mail to INBOX Jul 3 17:50:38 WiZARD deliver(willy): sieve runtime error: Notify: Generic Error Jul 3 17:50:38 WiZARD postfix/local[15239]: B31B419746C: to=<willy(a)wizard.dunanet.hu>, relay=local, delay=0.1, delays=0.07/0/0/0.02, dsn=2.0.0, status=sent (delivered to command: /usr/lib/dovecot/deliver) I always get sieve runtime error: Notify: Generic Error Fileinto, and redirect works fine, but notify does not. I try "dovecot-sieve-1-0-64a7986b5e55.tar.bz2" without success. Please help debug "Generic Error". Thanks, Udv.: Willy -- PGP GNUPG/1.0 ID = 5BFA0D36 Kupor Laszlo Attila <willy(a)dunanet.hu> Key fingerprint = 3F68 9483 5B65 8E2F CD30 5326 50F9 5A33 5BFA 0D36

3 5

[Dovecot] Quota Messages
by Hermann wacker 13 Jul '07

13 Jul '07

Hi @all, First: I'm sorry when my english isn't understandable, please just ask if I messed things up. I switched from Cyrus to Dovecot (Cyrus was on Debian Sarge, Dovecot is now on a Etch) and I'm quite happy with it. There is just one thing that I'm missing in Dovecot. in Cyrus when users reached 90% of their Quota, a message popped up in their Mailclients, telling them to clean up their Mailboxes. Dovecot delivers the quotausage to the Client (I can see in my Thunderbird a small Statusbar), but when you don't look carefully, you will mostly miss the point where you can delete the messages without having a fight with the quotalimit (because mails in trash using the quota). At the moment I'm using "quota = fs" so there is no good way to keep the trash out of the quotathing and that's not the point of my question. The question is: Is there a way where Dovecot (or Postfix) inform the user that his quota is reaching its limit? Or maybe the postmaster, thats not important. The important thing is a way where my mailsystem tells somebody that quotas are reaching their limits. Greetings from Germany Hermann Wacker Dovecot Version: 1.0.rc15 Postfix Version: 2.3.8-2+b1 quotaconf: # /etc/dovecot/dovecot.conf IEffective uid=65534, gid=65534 ILoading modules from directory: /usr/lib/dovecot/modules/imap IModule loaded: /usr/lib/dovecot/modules/imap/lib01_quota_plugin.so IModule loaded: /usr/lib/dovecot/modules/imap/lib02_imap_quota_plugin.so log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_extra_groups: mail mail_location: maildir:%h/mails mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: passdb: driver: shadow userdb: driver: passwd

2 1

[Dovecot] Quota exceeded messages
by Frank Church 13 Jul '07

13 Jul '07

When I try to move messages between folders I get 'Quota exceeded' messages. I installed dovecot without any major configuration and accounts are created with PostfixAdmin. Is there some common setting that I must be missing? Version in use is 1.0 rc26 - Frank

3 7

[Dovecot] Patches to log imap bandwidth?
by Jason Fesler 13 Jul '07

13 Jul '07

Anyone patch dovecot to syslog bytes transfered during a session or anything of that sort? I'm trying to track down imap bandwidth spikes, and unfortunately the uid (according to ipfw) for the imap port spikes is 0. (Presumably FreeBSD's ipfw accounting is based on who started the app instead of the effective user id?) -- Jason Fesler, email/jabber <jfesler(a)gigo.com> resume: http://jfesler.com "Give a man fire, and he'll be warm for a day; set a man on fire, and he'll be warm for the rest of his life."

2 2

[Dovecot] Today's stable hg pull destroyed dovecot...
by Ralf Hildebrandt 13 Jul '07

13 Jul '07

I performed a hg pull today for 1.0.1 and after recompilation my log was flooded with: Jul 12 10:29:21 postamt dovecot: IMAP(kxx4): UID larger than next_uid in file /home/k/j/kxx4/Maildir/dovecot-uidlist (6 >= 0) Jul 12 10:29:21 postamt dovecot: IMAP(rexxxes): UID larger than next_uid in file /home/r/e/rexxxes/Maildir/dovecot-uidlist (1 >= 0) Jul 12 10:29:21 postamt dovecot: IMAP(sxxkim): Maildir /home/s/i/sxxkim/Maildir sync: UIDVALIDITY changed (1184228955 -> 3086699759) and people were reporting "the IMAP server closing and dropping connections". I then downloaded 1.0.1 from the webpage, rebuilt and the problems are gone. Now I'm getting those: Jul 12 10:33:10 postamt dovecot: IMAP(blxxe): Corrupted index cache file /home/b/l/blxxe/Maildir/dovecot.index.cache: indexid changed Somethin amiss with the index code? -- Ralf Hildebrandt (Ralf.Hildebrandt(a)charite.de) plonk(a)charite.de Postfix - Einrichtung, Betrieb und Wartung Tel. +49 (0)30-450 570-155 http://www.arschkrebs.de Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety. -- Benjamin Franklin, 1759

2 1