- dovecot - dovecot.org

[Dovecot] Can't send/receive mail from other domain
by Jeremy Gillick 12 Jun '07

12 Jun '07

I've followed the instructions ( http://wiki.dovecot.org/DovecotLDAPostfixAdminMySQL) to setup Dovecot with MySql and Postfix but cannot receive from (or send mail to) other domains. FYI: email messages are supposed to be stored under /var/mail/mozmonkey.com/<user>/ Directory Permissions: drwxr-xr-x 5 vmail mail 4096 May 10 12:57 mozmonkey.com OS: Linux, Fedora 4 Dovecot version: 1.0.0 --------- CONFIG START --------- $ sudo dovecot -n # /etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap pop3 imaps pop3s ssl_listen: [::] login_dir: /var/run/dovecot//login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no first_valid_uid: 101 last_valid_uid: 101 mail_extra_groups: mail mail_location: maildir:/var/mail/%d/%u mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: mechanisms: plain digest-md5 cram-md5 user: nobody debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/sql.conf userdb: driver: sql args: /etc/dovecot/sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: vmail group: mail master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: mail --------- CONFIG END --------- --------- LOG START (modified email address to prevent spam) --------- Jun 10 22:48:23 mozmonkey postfix/smtpd[27592]: connect from n9.bullet.re3.yahoo.com[68.142.237.94] Jun 10 22:48:23 mozmonkey postfix/trivial-rewrite[27595]: warning: do not list domain mozmonkey.com in BOTH mydestination and virtual_mailbox_domains Jun 10 22:48:23 mozmonkey postfix/smtpd[27592]: C0093210021: client= n9.bullet.re3.yahoo.com[68.142.237.94] Jun 10 22:48:23 mozmonkey postfix/cleanup[27599]: C0093210021: message-id=< 568874.40698.qm(a)web57505.mail.re1.yahoo.com> Jun 10 22:48:23 mozmonkey postfix/qmgr[27282]: C0093210021: from=< jeremymailing123(a)yahoo.com>, size=2242, nrcpt=1 (queue active) Jun 10 22:48:23 mozmonkey postfix/trivial-rewrite[27595]: warning: do not list domain mozmonkey.com in BOTH mydestination and virtual_mailbox_domains Jun 10 22:48:23 mozmonkey postfix/local[27600]: warning: dict_nis_init: NIS domain name not set - NIS lookups disabled Jun 10 22:48:23 mozmonkey postfix/smtpd[27592]: disconnect from n9.bullet.re3.yahoo.com[68.142.237.94] Jun 10 22:48:23 mozmonkey postfix/local[27600]: C0093210021: to=< jerxyz(a)mozmonkey.com>, relay=local, delay=0.27, delays=0.2/0.03/0/0.04, dsn= 5.2.0, status=bounced (cannot update mailbox /var/mail/jerxyz for user jerxyz. cannot open file: Permission denied) Jun 10 22:48:24 mozmonkey postfix/cleanup[27599]: 041A7210033: message-id=< 20070611054824.041A7210033(a)mozmonkey.com> Jun 10 22:48:24 mozmonkey postfix/qmgr[27282]: 041A7210033: from=<>, size=4181, nrcpt=1 (queue active) Jun 10 22:48:24 mozmonkey postfix/bounce[27602]: C0093210021: sender non-delivery notification: 041A7210033 Jun 10 22:48:24 mozmonkey postfix/qmgr[27282]: C0093210021: removed Jun 10 22:48:24 mozmonkey dovecot: auth(default): master in: USER 1 jeremymailing(a)yahoo.com service=deliver Jun 10 22:48:24 mozmonkey dovecot: auth-worker(default): sql( jeremymailing(a)yahoo.com) SELECT concat('/var/mail/', maildir) as home, concat('maildir:/var/mail/', maildir) as mail, 101 AS uid, 12 AS gid, concat('dirsize:storage=', quota) AS quota FROM mailbox WHERE (username = ' jeremymailing(a)yahoo.com' OR simpleuser = 'jeremymailing(a)yahoo.com') AND active = '1' Jun 10 22:48:24 mozmonkey dovecot: auth-worker(default): sql( jeremymailing(a)yahoo.com) User not found Jun 10 22:48:24 mozmonkey dovecot: auth(default): master out: NOTFOUND 1 Jun 10 22:48:24 mozmonkey postfix/pipe[27603]: 041A7210033: to=< jeremymailing(a)yahoo.com>, relay=dovecot, delay=0.08, delays=0.02/0.03/0/0.03, dsn=5.1.1, status=bounced (user unknown) Jun 10 22:48:24 mozmonkey postfix/qmgr[27282]: 041A7210033: removed --------- LOG END --------- Thanks, Jeremy

2 1

[Dovecot] 20070605 still hanging with SSL
by David Favor 12 Jun '07

12 Jun '07

Thought this was fixed and now it's back. No help from rawlog as the hang appears prior to authentication. Notice there is around a 90 second delay before authentication fires. Let me know how to proceed debugging. Thanks. _____ Here's my config: listen: *:143 ssl_listen: *:993 ssl_cipher_list: ALL:!LOW:!SSLv2 disable_plaintext_auth: no verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable: /usr/local/pkgs/dovecot-20070605/libexec/dovecot/imap-login login_greeting: IMAP ready. login_process_per_connection: no login_processes_count: 5 verbose_proctitle: yes first_valid_uid: 12 default_mail_env: maildir:~/Maildir mail_location: maildir:~/Maildir mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable: /usr/local/pkgs/dovecot-20070605/libexec/dovecot/rawlog \ /usr/local/pkgs/dovecot-20070605/libexec/dovecot/imap auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: shadow userdb: driver: passwd Here's a maillog snippet: Jun 11 07:50:40 net1 dovecot: Dovecot v20070522 starting up ... Immediately click on INBOX or other box and hang occurs... Jun 11 07:52:00 net1 dovecot: auth(default): client in: AUTH \ 1 PLAIN service=imap secured lip=69.94.137.124\ rip=71.155.185.14 Jun 11 07:52:00 net1 dovecot: auth(default): client out: CONT 1 Jun 11 07:52:00 net1 dovecot: auth(default): client in: CONT 1 \ AGRhdmlkAGZpcmUyM2JyaWNr Jun 11 07:52:00 net1 dovecot: auth(default): shadow(david,71.155.185.14): lookup Jun 11 07:52:00 net1 dovecot: auth(default): client out: OK 1 user=david Jun 11 07:52:00 net1 dovecot: auth(default): master in: REQUEST 1 30912 1 Jun 11 07:52:00 net1 dovecot: auth(default): passwd(david,71.155.185.14): lookup Jun 11 07:52:00 net1 dovecot: auth(default): master out: USER 1 \ david system_user=david uid=510 gid=506 home=/vhost/davidfavor.com/users/david Jun 11 07:52:00 net1 dovecot: imap-login: Login: user=<david>, method=PLAIN, \ rip=71.155.185.14, lip=69.94.137.124, TLS Jun 11 07:52:00 net1 dovecot: IMAP(david): Effective uid=510, gid=506,\ home=/vhost/davidfavor.com/users/david Jun 11 07:52:00 net1 dovecot: IMAP(david): maildir: \ data=/vhost/davidfavor.com/users/david/Maildir Jun 11 07:52:00 net1 dovecot: IMAP(david): maildir++: \ root=/vhost/davidfavor.com/users/david/Maildir, index=, control=, \ inbox=/vhost/davidfavor.com/users/david/Maildir -- Like feeling your best ever, all day, every day? Here's how... Your simple secrets are here - http://RadicalHealth.com

2 1

[Dovecot] SSL_CTX_set_info_callback problem in latest source
by David Favor 11 Jun '07

11 Jun '07

In the file ./src/login-common/ssl-proxy-openssl.c appears the code: if (verbose_ssl) SSL_CTX_set_info_callback(ssl_ctx, ssl_info_callback); It appears the SSL_CTX_set_info_callback symbol only occurs in the openssl development branch starting with 0x00909000L as this symbol is missing from openssl 0.9.8b and 0.9.8e (no check of the latest nightly snapshot of the stable 0.9.8 branch). It appears there should be a compilation guard around this code. Perhaps... #if OPENSSL_VERSION_NUMBER >= 0x00909000L if (verbose_ssl) SSL_CTX_set_info_callback(ssl_ctx, ssl_info_callback); #endif -- Like feeling your best ever, all day, every day? Here's how... Your simple secrets are here - http://RadicalHealth.com

2 4

[Dovecot] lazy_expunge and emails from Inbox, doesn't list INBOX in deleted
by Roger Binns 11 Jun '07

11 Jun '07

I'm using the dovecot available on Ubuntu Feisty (1.0rc17) and am trying to migrate from courier-imap. A really important feature for me from courier is that expunged messages end up in Trash where they are removed after 7 days. I can get an approximation of this feature as described in the documentation: namespace private { prefix = INBOX. seperator = . inbox = yes } namespace private { prefix = DELETED. seperator = . location = maildur:~/Maildir/deleted } lazy_expunge = DELETED. DELETED. DELETED. This all works fine except for messages that were deleted from the Inbox. They do end up in the right place (~/Maildir/deleted/cur) but that location is not listed as a subscribable folder. Here you can see that deleted messages from my ciontope folder show up, but not the inbox. a LIST "DELETED." * * LIST (\HasNoChildren) "." "DELETED.ciontope" a OK List completed. You can't examine the namespace itself: a EXAMINE DELETED a NO Unknown namespace. a EXAMINE DELETED. a NO Invalid mailbox name But the folder does exist: a EXAMINE DELETED.INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 4 EXISTS * 0 RECENT * OK [UIDVALIDITY 1181423860] UIDs valid * OK [UIDNEXT 5] Predicted next UID a OK [READ-ONLY] Select completed. Is there any way to convince dovecot to list DELETED.INBOX so that clients can see it an subscribe to it? Roger

3 5

[Dovecot] Multiple IP(or Host) listen in dovecot.conf.
by Yoshihiro Kawabe 11 Jun '07

11 Jun '07

Hi. Does someone make update for `Multiple IP(or Host) listen in dovecot.conf'? I made trivial patch so. But this patch doesn't solve `Support listening in multiple sockets' in TODO. It appends only the capability as multiple listen in dovecot.conf. So, `login_processes_count' becomes ambiguous. In CASE1, login_processes_count = 2, forked imap-login processes are 8. -- samples dovecot.conf applied this patch are following. CASE 1: listen = 127.0.0.1, 192.168.0.10, imap-server1, imap-server2.example.com or CASE 2: protocol imap { listen = 127.0.0.1:143, imap-server1:10143 ssl_listen = imap-server2:10943, 127.0.0.1 .. } protocol pop3 { listen = 127.0.0.1, pop-server1:10100 .. } -- Update brief. src/master/ master-setting.h: listen_fd and related members changed to array_t. also name add (s). master-setting.c: few member initialization delete. main.c: handle multiple IP and port, fds as array_t. resolve_ip argment change. login-process.h: add listen_fd and ssl_listen_fd member to login_group structre. login-process.c: add login_groups_create function for mapping login process to each listen fd. change dup2 source fd in create_login_process. src/lib network.c: change getnameinfo error value. -- Kawabe,Yoshihiro <sowhat(a)amnis.co.jp> As the stars blink in the night sky, our married hearts are never splitted. Even if we will unclasp each other hands, until we retain that. by H.S.

2 3

[Dovecot] dovecot-20070605 runtime problems
by David Favor 11 Jun '07

11 Jun '07

I've build this nightly snapshot with my installed openssl, which is 0.9.8b (Fedora 6) and the latest openssl development tree. The 20070605 version of dovecot starts up doing ssl protocol perfect, then after clicking a few directories, then when clicking back to INBOX, dovecot hangs. There is no logging info, even with --enable-debug on and all .conf file directives I can find. Doing a 'ngrep port 993' shows no SSL dialog. If I go through my same compile sequence using the dovecot-1.0.0 source all is well with both the system openssl and the latest openssl snapshot, so it appears something is wrong in the current nightly snapshot. My primary question is howto debug this hang, short of attaching gdb to the process. Any suggestions are appreciated. Thanks. I'm using the latest Thunderbird version 2.0.0.4 (20070604). I've build it using: [root@net1 dovecot-20070605]# build_dovecot mkdir -p /build/work/dovecot-20070605 cd /build/work/dovecot-20070605 unset CDPATH export CPPFLAGS='-pipe -O2 -I/usr/local/include' export LDFLAGS='-L/usr/local/lib' make distclean ./configure --prefix=/usr/local/pkgs/dovecot-20070605 --disable-nls --with-deliver --with-sqlite --without-vpopmail --with-notify=inotify --with-ioloop=epoll --with-ssl=openssl --enable-debug --enable-asserts make make check rm -rf /usr/local/pkgs/dovecot-20070605 make install install -c -m 555 doc/mkcert.sh /usr/local/pkgs/dovecot-20070605/sbin/dovecot-mkcert shmk /usr/local/pkgs/dovecot-20070605/sbin /usr/local/sbin mkdir -p /etc/ssl/certs /etc/ssl/private rm -f /etc/ssl/certs/dovecot.pem /etc/ssl/private/dovecot.pem export OPENSSLCONFIG=/tools/conf/dovecot-openssl.conf dovecot-mkcert cp -f /etc/ssl/certs/dovecot.pem /var/www/html/. chmod ugo+r /var/www/html/dovecot.pem groupadd dovecot || /bin/true groupadd: group dovecot exists useradd -M -g dovecot -d /usr/local -s /sbin/nologin dovecot || /bin/true useradd: user dovecot exists (cd /etc/init.d && ln -sf /tools/init.d/dovecot .) -- Like feeling your best ever, all day, every day? Here's how... Your simple secrets are here - http://RadicalHealth.com

2 3

[Dovecot] DC V1.0.1 release date
by Stewart Dean 11 Jun '07

11 Jun '07

Is there a sense of when this might be? Will it include a fix for SSL with a second invocation? -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 0

[Dovecot] Connection dropped by IMAP server _ Internal login failure: root
by Saeed Abbassi 11 Jun '07

11 Jun '07

Dear reader, Please help me find a way through this problem, I have CentOS 4.2, dovecot-0.99.11-4.EL4, squirrelmail-1.4.8, While I try to log in as Root (username: root; password: password) I get the error that says, > ERROR: Connection dropped by IMAP server. > Query: CAPABILITY > Content of the file /var/log/maillog is as follows > Jun 7 12:56:59 PBX sendmail[5170]: l57Guxxr005170: from=root, > size=126838, class=0, nrcpts=1, msgid=< > 200706071656.l57Guxxr005170(a)PBX.COMPANY.COM>, relay=root@localhost > Jun 7 12:57:05 PBX sendmail[5171]: l57GuxDv005171: from=< > root(a)PBX.COMPANY.COM>, size=127100, class=0, nrcpts=1, msgid=< > 200706071656.l57Guxxr005170(a)PBX.COMPANY.COM>, proto=ESMTP, daemon=MTA, > relay=localhost.localdomain [127.0.0.1] > Jun 7 12:57:05 PBX sendmail[5170]: l57Guxxr005170: to=root, ctladdr=root > (0/0), delay=00:00:06, xdelay=00:00:06, mailer=relay, pri=156838, relay=[ > 127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (l57GuxDv005171 Message > accepted for delivery) > Jun 7 12:57:05 PBX sendmail[5172]: l57GuxDv005171: to=admin, ctladdr=< > root(a)PBX.COMPANY.COM> (0/0), delay=00:00:00, xdelay=00:00:00, > mailer=local, pri=157317, dsn=2.0.0, stat=Sent > Jun 7 22:26:11 PBX dovecot: Killed with signal 15 > Jun 11 11:39:00 PBX dovecot: Dovecot starting up > Jun 11 11:39:01 PBX sendmail[2704]: alias database /etc/aliases rebuilt by > root > Jun 11 11:39:01 PBX sendmail[2704]: /etc/aliases: 79 aliases, longest 10 > bytes, 811 bytes total > Jun 11 11:39:01 PBX sendmail[2709]: starting daemon (8.13.1): > SMTP+queueing@01:00:00 > Jun 11 11:39:01 PBX sm-msp-queue[2717]: starting daemon (8.13.1): > queueing@01:00:00 > Jun 11 11:51:27 PBX dovecot: Logins with UID 0 not permitted (user root) > Jun 11 11:51:27 PBX imap-login: Internal login failure: root [::ffff: > 127.0.0.1] And I says, [root@PBX etc]# dovecot -c dovecot.conf Fatal: listen(143) failed: Address already in use Any help is appreciated in advance, Cheers, Saeed144

2 1

[Dovecot] [Debian] Packages available for 1.0.0
by Brian T Glenn 11 Jun '07

11 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 They aren't thoroughly tested, but I've been running on them for a little while and they seem stable. This is based on the latest RC from backports.org and is built for sarge. deb http://debian.delink.net/ sarge-delink main Enjoy, - -- http://www.delink.net/ Ok, so he's got a cellphone in one hand and latte in the other, I know what he's using to steer, but what is that soccer mom using, a strap-on? - Brian Kantor in the monastery -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFGZdGMFy/L+4MovqIRApa7AJ4s3jU0La4dCijm08iOpa7m9dSaowCeN1eW 6he6hZFEzREtzZ/iA4mvEms= =Ln6h -----END PGP SIGNATURE-----

2 2

[Dovecot] Can't connect to SMTP outside localhost
by Jeremy Gillick 11 Jun '07

11 Jun '07

I have Dovecot setup with Postfix and can't seem to connect to to the SMTP server (port 25) unless I'm on the server itself (telnet localhost 25). For example, I cannot use my mail client, Thunderbird, to send mail from my laptop -- it cannot even connect to the server. I checked the logs and nothing shows up for the attempted connection. Dovecot version: 1.0.0 Postfix version: 2.3.6 ---------- START DOVECOT CONFIG ---------- $ sudo dovecot -n # /etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap pop3 imaps pop3s ssl_listen: [::] login_dir: /var/run/dovecot//login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no first_valid_uid: 101 last_valid_uid: 101 mail_extra_groups: mail mail_location: maildir:/var/mail/%d/%u mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 auth default: mechanisms: plain digest-md5 cram-md5 user: nobody debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/sql.conf userdb: driver: sql args: /etc/dovecot/sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: vmail group: mail master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: mail ---------- END DOVECOT CONFIG ---------- ---------- POSTFIX CONFIG (main.cf) ---------- queue_directory = /var/spool/postfix command_directory = /usr/sbin daemon_directory = /usr/libexec/postfix mail_owner = postfix myhostname = mozmonkey.com mydomain = mozmonkey.com inet_interfaces = $myhostname, localhost mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain local_recipient_maps = $virtual_mailbox_maps unknown_local_recipient_reject_code = 550 mail_spool_directory = /var/mail debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5 sendmail_path = /usr/sbin/sendmail.postfix newaliases_path = /usr/bin/newaliases.postfix mailq_path = /usr/bin/mailq.postfix setgid_group = postdrop html_directory = no manpage_directory = /usr/share/man sample_directory = /usr/share/doc/postfix-2.3.6/samples readme_directory = /usr/share/doc/postfix-2.3.6/README_FILES address_verify_map = btree:/var/spool/postfix/address_verify virtual_mailbox_domains = proxy:mysql:$config_directory/mysql_virtual_domains_maps.cf virtual_mailbox_base = /var/mail virtual_mailbox_maps = proxy:mysql:$config_directory/mysql_virtual_mailbox_maps.cf virtual_alias_maps = proxy:mysql:$config_directory/mysql_virtual_alias_maps.cf virtual_minimum_uid = 101 virtual_uid_maps = static:101 virtual_gid_maps = static:12 virtual_transport = dovecot dovecot_destination_recipient_limit = 1 smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_exceptions_networks = $mynetworks smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtp_tls_CAfile = /etc/pki/tls/cert.pem smtp_tls_cert_file = /etc/pki/tls/certs/localhost.crt smtp_tls_key_file = /etc/pki/tls/private/localhost.key smtp_tls_session_cache_database = btree:/var/spool/postfix/smtp_tls_session_cache smtp_tls_security_level = may smtpd_tls_dh1024_param_file = $config_directory/dh_1024.pem smtpd_tls_dh512_param_file = $config_directory/dh_512.pem smtpd_tls_received_header = yes smtpd_tls_ask_ccert = yes smtpd_tls_loglevel = 1 tls_random_source = dev:/dev/urandom relay_domains = proxy:mysql:$config_directory/mysql_relay_domains_maps.cf ---------- POSTFIX CONFIG END (main.cf) ---------- ---------- POSTFIX CONFIG (master.cf) ---------- smtp inet n - n - - smtpd smtps inet n - n - - smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp relay unix - - n - - smtp -o fallback_relay= showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} old-cyrus unix - n n - - pipe flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user} cyrus unix - n n - - pipe user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} ---------- POSTFIX CONFIG END(master.cf) ---------- <dovecot(a)dovecot.org>

2 1

[Dovecot] auth_username_format
by Sergio Souza 11 Jun '07

11 Jun '07

I configured in the archive dovecot.conf the parameter auth_username_format = "%Ld_%Ln" because the users of my server have access yours e-mail accounts based in /etc/passswd where they are registered in format domain.com_user. This configuration work without problems via pop3 and imap (squirrelmail). My server is CentOS 5.0 and dovecot is 1.0.rc15. The problem that occurs currently is: when the users go to have access the interface of change preferences (ISPCONFIG) where the supplied data of authentication are not the data of the email account (eg. user(a)domain.com) and yes of /etc/passwd the dovecot inserts underscore before the domain (eg. _domain.com_user) when it would have to make this only between the domain and the user. Exists a way to solve this problem? Thank in advance. -- Sergio Souza Wireless Support

1 0

[Dovecot] dovecot vs. Outlook Mobile
by J.Wendland＠scan-plus.de 10 Jun '07

10 Jun '07

Hi, I am testing dovecot with Outlook Mobile 5 (OM5), which is currently not working. OM5 connects, says "NOOP" and "CAPABILITY", does login correctly and simply loggs out after that telling the user that it could not download any messages. When I put an imapproxy[0] in front of dovecot, OM5 works perfectly well. That leads me to the thought, that something in the way dovecot sends its responses makes OM5 upset. Does anybody on this have seen this before? Thanks, Jörg [0] http://www.imapproxy.org -- Sicherheit - Verfügbarkeit - Kontinuität ------------------------------------------------------------------------- IT-Service-Management von ScanPlus GmbH Tel. +49 731 92013 150 Lise-Meitner-Straße 5, D-89081 Ulm, Germany Fax. +49 731 92013 29 150 Web: http://www.scan-plus.de/ Mail: wendland(a)scan-plus.de -------------------------------------------------------------------------

2 1

[Dovecot] Lost login process PID XXXXX
by Patrick Linstruth 10 Jun '07

10 Jun '07

Dear List: We installed Dovecot v1.0.0 a couple days ago. After running the software for a couple days, the following happened: Jun 6 15:58:10 cello dovecot: POP3(sgtdohara): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 Jun 6 15:58:10 cello dovecot: POP3(dorene): Disconnected: Logged out top=0/0, retr=1/4652, del=1/1, size=4635 Jun 6 15:58:10 cello dovecot: Lost login process PID 17214 Jun 6 15:58:12 cello dovecot: Dovecot v1.0.0 starting up Jun 6 15:58:12 cello dovecot: Socket already exists: /qnet/var/run/dovecot/dict-server Jun 6 15:58:12 cello dovecot: net_listen_unix(/qnet/var/run/dovecot/login/default) failed: Address already in use Jun 6 15:58:12 cello dovecot: Couldn't create auth process listener Jun 6 15:58:12 cello dovecot: net_listen_unix(/qnet/var/run/dovecot/login/default) failed: Address already in use Jun 6 15:58:12 cello dovecot: Couldn't create auth process listener Jun 6 15:58:12 cello dovecot: login: Authentication process 17253 doesn't exist Jun 6 15:58:12 cello dovecot: login: Authentication process 17253 doesn't exist Jun 6 15:58:13 cello dovecot: login: Authentication process 17253 doesn't exist Jun 6 15:58:13 cello dovecot: login: Authentication process 17253 doesn't exist Jun 6 15:58:14 cello dovecot: login: Authentication process 17253 doesn't exist Jun 6 15:58:14 cello dovecot: login: Authentication process 17253 doesn't exist Jun 6 15:58:14 cello dovecot: login: Authentication process 17253 doesn't exist The "Authentication process 17253 doesn't exist" message continued until I changed inetd.conf to run our old POP3/IMAP server. Server vitals: BSD/OS 4.2 BSDI BSD/OS 4.2 Kernel #2: Tue Feb 21 11:10:22 PST 2006 4:46PM up 431 days, 16:40, 6 users, load averages: 1.19, 1.27, 1.02 Any help would be appreciated. We don't want to enable the software again until we know what caused the problem and hopefully find a solution to keep it from happening again. Patrick

2 3

[Dovecot] user lookups not working when using dovecot as lda
by Sven 10 Jun '07

10 Jun '07

Hi Currently I'm using local from postfix for delivering mails. Now I want to change this to using the dovecot lda as I want to use plus addressing. I configured postfix to use dovecot as I found in the wiki and several howtos in the net. My Problem is the following: dovecot delver accepts the mail but bounces it with error: user unknown. Logging in and authentication via imap4 and pop3 works, only deliver seems to be unable to lookup the users from userdb. Has anyone an idea where my mistake is? Here is my actual configuration: dovecot version: 1.0.beta9 postfix version: 2.2.10 system: FreeBSD 6.1-STABLE The system is using maildirs. I changed my postfix/master.cf to the following: dovecot unix - n n - - pipe flags=DRhu user=dovecot:dovecot argv=/usr/local/libexec/dovecot/deliver -d ${recipient} -m ${extension} In my postfix/main.cf I use the following: dovecot_destination_recipient_limit = 1 local_transport = dovecot lda & auth specific settings from my dovecot.conf: protocol lda { postmaster_address = postmaster(a)my-domain.org hostname = mail.my-domain.org #mail_plugins = #mail_plugin_dir = /usr/local/lib/dovecot/imap sendmail_path = /usr/sbin/sendmail auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log # syslog_facility = mail } auth_executable = /usr/local/libexec/dovecot/dovecot-auth auth_process_size = 256 auth_debug = yes auth_verbose = yes auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root socket listen { master { path = /var/run/dovecot/auth-master mode = 0666 user = dovecot group = dovecot } client { path = /var/run/dovecot/auth-client mode = 0660 } } } plugin { } Any help is appreciated as I dont know where to look for my mistake. regards, Sven

2 1

[Dovecot] bug in passdb-vpopmail.c
by Moritz Mertinkat 10 Jun '07

10 Jun '07

Hi there, i've tried to compile dovecot-latest.tar.gz (currently dovecot-20070522) with vpopmail support and spotted the following bug (patch is also attached): --- dovecot-20070522/src/auth/passdb-vpopmail.c.orig 2007-05-20 23:11:36.000000000 +0200 +++ dovecot-20070522/src/auth/passdb-vpopmail.c 2007-06-06 09:02:01.968750000 +0200 @@ -66,7 +66,7 @@ password = vpopmail_password_lookup(request, TRUE, &result); if (password == NULL) { - callback(result, "", request); + callback(result, "", 0, request); return; } Greets, Moritz. --- dovecot-20070522/src/auth/passdb-vpopmail.c.orig 2007-05-20 23:11:36.000000000 +0200 +++ dovecot-20070522/src/auth/passdb-vpopmail.c 2007-06-06 09:02:01.968750000 +0200 @@ -66,7 +66,7 @@ password = vpopmail_password_lookup(request, TRUE, &result); if (password == NULL) { - callback(result, "", request); + callback(result, "", 0, request); return; }

2 1

[Dovecot] [Fwd: mulitple instance run problem]
by Stewart Dean 10 Jun '07

10 Jun '07

As I explained, I want to be able to run a second instance of DC through another port to do testing while not interrupting the users using the primary instance in the the regular port. I was instructed to create a second config file with different listen ports and a separate base_dir. I did so and invoked dc with -c pointing to dovecot2.conf. Jun 7 10:04:23 mercury mail:info dovecot: Dovecot v1.0.0 starting up I pointed my client at the non-SSL port, and everything worked fine....until 3 hours later. The client wasn't getting things through, so I checked the syslog on the dc server where I saw rapidly repeating errmsgs:... Jun 7 12:51:07 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist Jun 7 12:58:55 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist Jun 7 12:58:59 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist Jun 7 12:59:01 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist Jun 7 12:59:05 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist and many more, then...... Jun 7 13:34:20 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist Jun 7 13:36:30 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist Jun 7 13:36:54 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist I kill the second instance.....but things don't clear up....rather I now get a different errmsg....which must be from the primary dc instance, since the 2nd instance and all of its children are gone (I checked the ps) Jun 7 13:39:20 mercury mail:err|error dovecot: login: Authentication process 10 89784 doesn't exist Jun 7 13:40:00 mercury mail:err|error dovecot: imap-login: Can't connect to aut h server at default: Connection refused Jun 7 13:40:06 mercury mail:err|error dovecot: imap-login: Can't connect to aut h server at default: Connection refused Jun 7 13:40:06 mercury mail:err|error dovecot: imap-login: Can't connect to aut h server at default: Connection refused Finally I do a kill -1 of the primary instance and that cleans things up Jun 7 13:45:46 mercury mail:warn|warning dovecot: SIGHUP received - reloading configuration Is there something I'm doing wrong? Have other people run two instances without problem? I tried starting the second instance and killing it immediately thereafter....that wnet OK, but it hasn't been 3 hours yet. -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

4 5

[Dovecot] auth_username_format
by Sergio Souza 10 Jun '07

10 Jun '07

I configured in the archive dovecot.conf the parameter auth_username_format = “%Ld_%Ln” because the users of my server have access yours e-mail accounts based in /etc/passswd where they are registered in format domain.com_user. This configuration work without problems via pop3 and imap (squirrelmail). My server is CentOS 5.0 and dovecot is 1.0.rc15. The problem that occurs currently is: when the users go to have access the interface of change preferences (ISPCONFIG) where the supplied data of authentication are not the data of the email account (eg. user(a)domain.com) and yes of /etc/passwd the dovecot inserts underscore before the domain (eg. _domain.com_user) when it would have to make this only between the domain and the user. Exists a way to solve this problem? Thanks in advance. -- Sergio Souza

1 0

[Dovecot] Listen on several (but not all) Interfaces
by Dominik Schulz 09 Jun '07

09 Jun '07

Hi, I'm using Dovecot 1.0rc15 from Debian stable/etch. I'd like to have Dovecot listen on more than one interface. It shall listen on one IPv4 Interface and on one IPv6 Interface. The comments in the sample configuration file say, that it's not possible to listen on more than one interface at a time. Sadly it's no option to me to listen on all interfaces. So I'd like to ask if there is a chance that Dovecot will support listening on several selected interfaces anytime soon? Thanks in advance for every helpful reply. Best Regards Dominik

5 4

[Dovecot] Dot Lock probelm resolution
by Stewart Dean 08 Jun '07

08 Jun '07

For the record/archive, so some other unfortunate dovecot implementer won't spend weeks figuring out this particular way dotlocks can have problems... here is what was trashing our dotlocks Basically, I was seeing this: May 14 15:59:58 mercury mail:warn|warning dovecot: IMAP(sdean): Our dotlock file /var/spool/mail/sdean.lock was deleted (kept it 1 secs) > May 14 15:59:58 mercury mail:err|error dovecot: IMAP(sdean): file_dotlock_delete() failed with mbox file /var/spool/mail/sdean: No such file or directory Timo justifiably blamed the usual suspect, NFS, but when I dug into the maillog to see what was going on when the locks were getting trashed, in almost all cases, NFS wasn't involved. And I had recompiled procmail so that it used the same locking strategy (and checked it), deactivated NFS client attribute caching, etc., etc. It turned out that my predecessor had done something 10 years ago that was arcane, inscrutable and kludgy in the .procmailrc file. This *purposefully* trashed the dotlock. Not knowing what it did when I took over (predecessor long gone, things in disarray), I left it in, because I worried that something would break if we removed it. We have perpetuated it in creation of all new accounts. This procmailrc stanza looks like this: ####### BEGIN SYS ADMIN ADDED LINES ####### ## !!!!!! Do not remove these lines !!!!!! ## They have been placed here by System Admin ## If removed, your mail will run slower and ## generate error messages!!!!!!!! LOCKFILE #removes preexisting lockfile LOG='lockfile $DEFAULT$LOCKEXT ' TRAP="rm -f $DEFAULT$LOCKEXT" :0 $DEFAULT ####### END OF SYS ADMIN ADDED LINES ####### # IF YOU ADD STUFF, DO IT ABOVE THIS BLOCK # I sent a note to the procmail mailing list hoping to get a clue of what is doing. Here are my Qs and their As: >> 2) Is it syntactically correct? > I think so, though highly obfuscated and semantically worthless. >> 3) Is what it's doing real/worthwhile? > No. My guess is it was a kludge to work around some error with an > older version of procmail, if it ever served any function at all. Since we removed it, there have been no dotlocking errmsgs in the syslog. -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 0

[Dovecot] User unknown in local recipient table? Dovecot LDA/Postfix
by Yu Chen 08 Jun '07

08 Jun '07

This probably is a postfix problem, but I think there are lots of postfix experts/users on this list, and have heard a lot good things about this list, so I am just giving it a try. Thanks in advance! I am using dovecot-1.0.0-8_56.src.rpm downloaded from atrpms.net, and rebuilt from it(rpmrebuild ...). Postfix is 2.4.3. I followed documents at http://wiki.dovecot.org/LDA and LDA/Postfix, and used passwd-file (created /etc/passwd.dovecot file) both as password Database and User database. I can send emails, but not receiving, keep getting the "User unknow error". Do I need to change the "local_recipient_map" in main.cf, and if so, how? Here are some related configuration: ########### dovecot -n ########### # /etc/dovecot.conf log_path: /var/log/dovecot.log ssl_ca_file: /etc/pki/dovecot/certs/ca-bundle.crt verbose_ssl: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting: Dovecot ready. verbose_proctitle: yes first_valid_uid: 102 mail_extra_groups: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u:INDEX=/var/mail_indexes/%d/%n mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): outlook-idle auth default: mechanisms: plain login executable: /usr/local/libexec/dovecot/dovecot-auth verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/passwd.dovecot userdb: driver: passwd-file args: /etc/passwd.dovecot socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot/auth-master mode: 384 ############### postconf -n ################ alias_database = hash:/etc/postfix/aliases alias_maps = hash:/etc/postfix/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = /usr/share/doc/postfix-2.4.3-documentation/html inet_interfaces = $myhostname, localhost invalid_hostname_reject_code = 450 mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man maps_rbl_reject_code = 450 mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain myhostname = my.host.com mynetworks = myip/24, 127.0.0.0/8 newaliases_path = /usr/bin/newaliases.postfix non_fqdn_reject_code = 450 queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.4.3-documentation/readme sample_directory = /etc/postfix sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_CAfile = /usr/share/ssl/certs/ca-bundle.crt smtp_tls_cert_file = /usr/share/ssl/certs/postfix.pem smtp_tls_key_file = /usr/share/ssl/certs/postfix.pem smtp_tls_session_cache_database = btree:/var/spool/postfix/smtp_tls_session_cache smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, permit_tls_clientcerts, reject_unauth_destination, check_relay_domains smtpd_sasl_auth_enable = yes smtpd_sasl_exceptions_networks = $mynetworks smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_CAfile = /usr/share/ssl/certs/ca-bundle.crt smtpd_tls_cert_file = /usr/share/ssl/certs/postfix.pem smtpd_tls_key_file = /usr/share/ssl/certs/postfix.pem smtpd_tls_loglevel = 2 smtpd_tls_session_cache_database = btree:/var/spool/postfix/smtpd_tls_session_cache tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 virtual_transport = dovecot Regards, C.Y =========================================== Yu Chen Howard Hughes Medical Institute Chemistry Building, Rm 182 University of Maryland at Baltimore County 1000 Hilltop Circle Baltimore, MD 21250 phone: (410)455-6347 (primary) (410)455-2718 (secondary) fax: (410)455-1174 email: chen(a)hhmi.umbc.edu ===========================================

2 1

[Dovecot] PAM info please
by Frank Bonnet 07 Jun '07

07 Jun '07

Hello I'm searching infos on using Dovecot with pam_ldap and FreeBSD 6.2 any pointers welcome :-) Thanks -- Frank

2 2

[Dovecot] Latest MANAGESIEVE patch -- how to start daemon?
by Andreas Ntaflos 07 Jun '07

07 Jun '07

Hello list, I'm using Dovecot 1.0.0 on FreeBSD 6.2-RELEASE and applied the latest MANAGESIEVE patch v3 [1] which seems to have worked smoothly, i.e. all hunks succeeded and no compilation problems. Now this may be stupid question with an obvious answer, but I am at a loss at how to start the daemon? What's the binary called that starts the sieve server? Is there a special way to invoke it? I haven't been able to find anything useful on that matter and there doesn't seem to be a TFM to R yet, the Wiki just links to [1]. What do I have to do? Did I forgot to patch something? I'd appreciate any insight on this subject! Thanks in advance! Andreas [1] http://dovecot.org/list/dovecot/2007-March/021130.html -- Andreas "daff" Ntaflos Vienna, Austria GPG Fingerprint: 6234 2E8E 5C81 C6CB E5EC 7E65 397C E2A8 090C A9B4

5 8

[Dovecot] Quota Warning Message
by Gabriele Fergola 06 Jun '07

06 Jun '07

Hi to everyone, i try to implement in dovecot the quota warning message for the user but withouot success. I do the Patch found on the site but .. nothing happened. Anyone can help me please? Workino

1 0

[Dovecot] Replication plans
by Timo Sirainen 06 Jun '07

06 Jun '07

Several companies have been interested in getting replication support for Dovecot. It looks like I could begin implementing it in a few months after some other changes. So here's how I'm planning on doing it: What needs to be replicated: - Saving new mails (IMAP, deliver) - Copying existing mails - Expunges - Flag and keyword changes - Mailbox creations, deletions and renames - Subscription list - IMAP extension changes, such as ACLs I'll first talk about only master/slave configuration. Later then master/multi-slave and multi-master. Comments? Basic design ------------ Since the whole point of master-slave replication would be to get a reliable service, I'll want to make the replication as reliable as possible. It would be easier to implement much simpler master-slave replication, but in error conditions that would almost guarantee that some messages get lost. I want to avoid that. Both slave and master would be running a dovecot-replication process. They would talk to each others via TCP connection. Master would be feeding changes (transactions) to slave, and slave would keep replying how far it's committed the changes. So there would be an increasing sequence number sent with each transaction. Master keeps all the changes in memory until slave has replied that it has committed the changes. If the memory buffer gets too large (1MB?) because the slave is handling the input too slowly or because it's completely dead, the master starts writing the buffer to a file. Once the slave is again responding the changes are read from the file and finally the file gets deleted. If the file gets too large (10MB?) it's deleted and slave will require a resync. Master always keeps track of "user/mailbox -> last transaction sequence" in memory. When the slave comes back up and tells the master its last committed sequence, this allows the master to resync only those mailboxes that had changed. If this mapping doesn't exist (master was restarted), all the users' mailboxes need to be resynced. The resyncing will also have to deal with new mailboxes, ACL changes and such. I'm not completely sure yet how the resyncing will work. Probably the only important thing here is that it would be good if it would resolve any message UID conflicts (even though they shouldn't happen, see below) by comparing either the messages' MD5 contents, or with maildir it would be enough to just compare the maildir filename. It's possible that the slave doesn't die completely but only some transactions fail. This shouldn't normally happen, so the easiest way to handle it would be to try a full resync, and if that still fails stop the whole slave. Another way would be to just mark that one user or mailbox as dirty and try to resync it once in a while. imap, pop3 and deliver would connect to dovecot-replication either using UNIX sockets or POSIX message queue. Queue could be faster, but sockets would allow better security checks. Or I suppose it would be possible to send some kind of a small authentication token in each message with queues. The communication protocol would be binary and the existing dovecot.index.log format would be used as much as possible (making it simple for slave to append changes to mailboxes' dovecot.index.log). dovecot-replication process would need read/write access to all users' mailboxes. So either it would run as root or it would need to have at least group-permission rights to all mailboxes. A bit more complex solution would be to use multiple processes each running with their own UIDs, but I think I won't implement this yet. The replication would require support for shared mailboxes. That way the mailboxes could be accessed using the configured shared namespaces, for example "shared/<username>/INBOX". (LMTP server could be implemented in a similar way BTW) Configuration ------------- I'm not yet sure how this should work. The simplest possibility would be just to configure a single slave and everything would be replicated there. But it should be possible to split users into multiple slaves (still one slave/user). The most configurable way to do this would be to have userdb return the slave host. Hmm. Actually that could work pretty well if the userdb returned slave's name and each slave would have a separate socket/queue where dovecot-replication listens in. I'm not sure if they could all still be handled by a single dovecot-replication process or if there should be a separate one for each of them. The configuration would then be something like: # slave for usernames beginning with letters A..K replication users_a_k { host = slave1.example.com # other options? } # L..Z and others replication users_l_z_rest { host = slave2.example.com } Saving ------ This is the most important thing to get right, and also the most complex one. Besides replicating mails that are being saved via Dovecot, I think also externally saved mails should be replicated when they're first seen. This is somewhat related to doing an initial sync to a slave. The biggest problem with saving is how to robustly handle master crashes. If you're just pushing changes from master to slave and the master dies, it's entirely possible that some of the new messages that were already saved in master didn't get through to slave. So when you switch to using slave, those messages are gone. The biggest problem with this is that when saving new mails, they'll be assigned UIDs that were already used by the original master. If a locally caching client had already seen the UID from the original master, it'll think the message is the original one instead of the new one. So the newly added message pretty much gets lost, and if the user could expunge the message (thinking it's the original one) without ever even seeing it. This UID conflict could be avoided by making the master tell slave whenever it's saving new mails. The latency between master-slave communication could be avoided with a bit of a trick: - When beginning to save/copy a mail, tell slave to increase UID counter by one. Slave replies with the new highest-seen-UID counter. - UID allocation is done after all the mails are saved/copied within a transaction. At this stage wait until slave has replied that it has reserved UIDs at least as high as we're currently allocating (other processes could have caused it to get even higher). - If save/copy is aborted, tell the slave to decrease the UID counter by the number of aborted messages. - UID counter desync shouldn't happen, but if it does handle that also somehow. Then the UID allocation latency depends on how long it takes to write the message, and where the message comes from. With IMAP APPEND there's probably no wait required, unless the APPEND command and the whole message arrives in one IP packet. With deliver and copying it might have to wait a while. So the UID allocation should work with minimal possible latency. It could use a separate TCP connection to slave and maybe a separate high priority process in the slave that would handle only UID allocations. The above will make sure that conflicting UIDs aren't used, but it doesn't make sure that messages themselves aren't lost. If the master's hard disk failed completely and it can't be resynced anymore, the messages saved there are lost. This could be avoided by making the saving wait until the message is saved to slave: - save mail to disk, and at the same time also send it to slave - allocate UID(s) and tell to slave what they were, wait for "mail saved" reply from slave before committing the messages to mailbox permanently This would however add more latency than the simpler UID allocation counter. I don't know if it should be optional which way is used. Perhaps I'll implement the full save-sync first and if it seems too slow then I'll implement optionally the UID allocation counter. Save messages from imap/deliver would contain at least: 1. user name (unless using UNIX sockets, then it's already known) 2. mailbox name 3. UIDVALIDITY 4a) UID 4b) global UID, filename, offset and size of the message 4a) would be used with the UID allocation counter behavior. The message would be sent after the message was saved and UIDs were allocated. 4b) would be used with the wait-slave-to-save behavior. The message would be sent immediately whenever new data was received for the message, so possibly multiple times for each message. The last block would then contain size=0. After saving all the mails in a transaction, there would be a separate "allocate UIDs x..y for global UIDs a, b, c, d, etc." message which the slave then replies and master forwards the reply to imap/deliver. If the slave is down, or if a timeout (a few seconds?) occurs while waiting for the reply from slave, imap/deliver could just go on saving the message. If this is done it's possible that if the master also dies soon, there will be UID conflicts. But since this should be a rare error condition, it's unlikely that the master will die soon after a misbehaving slave. Copying ------- Copying has similar UID conflict problems than saving. The main difference is that there's no need to transfer message contents, which makes it faster to handle copies reliably. Copying could be handled with the UID allocation counter way described above. Since the message already exists in the server, there's no way that the message gets lost. So it would be possible to allow master and slave to go into desync, because the user would still find the message from the original mailbox. Move operation is done with "copy + mark \deleted + expunge" combination. This could be problematic if the master had managed to do all that before slave saw the COPY at all. Since the message isn't yet copied to the new mailbox in slave, clients wouldn't see it there, but locally caching clients might not see the message in the original mailbox either because they had already received EXPUNGE notification for it. So this should be avoided in some way. Perhaps it would be better to just treat copies the same way as saves: Require a notification from slave before replying to client with OK message. Alternatively the wait could be done at EXPUNGE command, as described below. Expunges -------- Losing expunge transactions wouldn't be too bad, because the worst that can happen is that the user needs to expunge the message again. Except that having an expunged message suddenly appear again in the middle of the mailbox violates IMAP protocol. I don't know if/how that will break clients. Solution here would again be that before EXPUNGE notifications are sent to client we'll wait for reply from slave that it had also processed the expunge. Flag and keyword changes ------------------------ Most likely doesn't matter if some of them are lost. If someone really cares about them, it would be possible to again do the slave-waiting for either all the changes or just when some specific flags/keywords change. Other changes ------------- Mailbox creations, deletions, renames and subscription changes could all be handled in a similiar way to flag/keyword changes. Handling changes implemented by IMAP extensions such as ACL is another thing. It's probably not worth the trouble to implement a special replication handler for each plugin. These changes most likely will happen somewhat rarely though, so they could be implemented by sending the whole IMAP command to slave and have it execute the command using a regular imap process. The commands could be marked with some "replication" flag so Dovecot knows that they need to be sent to slave. Although instead of executing a new imap process for each user (probably each command), it could be possible to use one imap process and just change the mailbox name in the command. So instead of eg. "setacl mailbox (whatever)" the IMAP process would execute "setacl shared/username/mailbox (whatever)". That would require telling Dovecot what parameter contains the mailbox name. Should be pretty easy to implement, unless some IMAP extensions want multiple mailbox names or the position isn't static. I can't think of any such extensions right now though. Master/multi-slave ------------------ Once the master/slave is working, support for multiple slaves could be added. The main thing to be done here is to have the slaves select which one of them is the new master, and then they'll have to sync the mailboxes with each others, because each of them might have seen some messages that others hadn't. This is assuming that save/etc. operations that are waiting for a reply from slave would wait for only one reply from the first slave that happens to respond. The number of slave replies to wait for could be also configurable, in case you're worried of a simultaneous master+slave crash. Multi-master ------------ After master/multi-slave is working, we're nearly ready for a full multi-master operation. The master farm will need global locking. Perhaps there is a usable existing implementation which could be used. In any case there needs to be a way to keeps track of what master owns what locks. The easiest way to implement multi-master is to assume that a single user isn't normally accessed from different servers at the same time. This wouldn't be a requirement, but it would make the performance better. For most users you could handle this by making sure that load balancer transfers all connections from the same IP to the same server. Or you could use a Dovecot proxy that transfers the connections. So, once the user is accessed only from one server, the operation becomes pretty much like master/multi-slave. You'll just need to be able to dynamically change the current master server for the user. This can be done by grabbing a global per-user lock before modifying the mailbox. The lock wouldn't have to be released immediately though. If no other server needs the lock, there's no point in locking/unlocking constantly. Instead the lock server could request the current lock owner to release the lock whenever another server wants it.

8 20

[Dovecot] multiple dovecot invocations
by Stewart Dean 05 Jun '07

05 Jun '07

I need to have multiple invocations of dovecot running, one for productions and then one or more for test/dev, doing things like trying different authentication methods, getting quota working, etc. I knew how to do this with inetd, but I have been convinced that direct invocation is preferable, so I need to know how to do multiple invocations of dovecot. I had thought that perhaps I could do this: dovecot -c /usr/local/etc/dovecot2.conf where dovecot2.conf has different different listen port parms. This I did, and while it does seem to work, I get this error in the syslog: > Jun 5 14:42:43 mercury mail:err|error dovecot: Socket already exists: /usr/local/var/run/dovecot/dict-server > Jun 5 14:42:43 mercury mail:crit dovecot: execv(/usr/local/libexec/dovecot/dict) failed: No such file or directo > ry > Jun 5 14:42:43 mercury mail:err|error dovecot: child 1437914 (dict) returned error 84 (exec() failed) How do I correctly run multiple dc instances? -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 1

Re: [Dovecot] AIX mail quota plugin problems + dotlock problem resolved
by Timo Sirainen 05 Jun '07

05 Jun '07

On Tue, 2007-06-05 at 12:30 -0400, Stewart Dean wrote: > quotactl(Q_GETQUOTA, /) failed: Invalid argument So apparently this quotactl() call is wrong with AIX: if (quotactl(root->mount->mount_path, QCMD(Q_GETQUOTA, USRQUOTA), root->uid, (void *)&dqblk) < 0) { I don't know why though. You could try changing root->mount->mount_path to some actual mbox file path to see if it returns errors then. Except weren't your mailboxes NFS mounted? quotactl() doesn't work for NFS mounts at all. For NFS you could try this instead http://dovecot.org/patches/quota-rquotad.c

2 2

[Dovecot] IMAP traffic logging
by Chris Laif 05 Jun '07

05 Jun '07

Hi. I wonder if it is possible to log the number of bytes send in response to IMAP commands. Unfortunately there seems to be no config option similar to "pop3_logout_format". Courier writes a log file like this (header/body bytes): imaplogin: DISCONNECTED, ip=[::ffff:10.123.0.234], headers=0, body=0 Chris

3 4

[Dovecot] Dovecot Authentication Problem - Help pls!
by Odhiambo WASHINGTON 05 Jun '07

05 Jun '07

Hello List, This is dovecot 1.0.0 on FreeBSD 4.11-STABLE. I did not provide this information before:-) I am back again and I think I am edging closer to getting a solution. I have done some modifications and now dovecot gives me a different error message than before.... Here is what I have for the password_query and user_query password_query = SELECT popbox.cleartext AS password FROM popbox, domain \ WHERE popbox.local_part = 'eddie' AND popbox.domain_name = 'demo.wananchi.com' \ AND popbox.domain_name = domain.domain_name; +----------+ | password | +----------+ | boeing8 | +----------+ user_query = SELECT CONCAT(domain.path, '/', popbox.mbox_name) as home, \ 69 as uid, 6 as gid FROM popbox, domain WHERE popbox.local_part = 'eddie' \ AND popbox.domain_name = 'demo.wananchi.com' AND \ popbox.domain_name = domain.domain_name; +--------------------------------------------+-----+-----+ | home | uid | gid | +--------------------------------------------+-----+-----+ | /var/spool/virtual/demo.wananchi.com/eddie | 69 | 6 | +--------------------------------------------+-----+-----+ When I test to connect to the pop3 daemon, this is what happens now: root@ns2]#telnet 0 7173 Trying 0.0.0.0... Connected to 0. Escape character is '^]'. +OK Welcome. Dovecot is Ready to serve your emails. user eddie(a)demo.wananchi.com +OK pass boeing8 -ERR [IN-USE] Internal login failure. Refer to server log for more information. Connection closed by foreign host. ...and this is what dovecot writes to the log: [root@ns2]#less /var/log/dovecot.log dovecot: May 30 12:00:04 Info: auth(default): client in: AUTH 1 PLAIN service=POP3 secured lip=62.8.64.4 rip=62.8.64.4 resp=AGVkZGllQGRlbW8ud2FuYW5jaGkuY29tAGJvZWluZzg= dovecot: May 30 12:00:04 Info: auth-worker(default): mysql: Connected to localhost (virtualemail) dovecot: May 30 12:00:04 Info: auth-worker(default): sql(eddie(a)demo.wananchi.com,62.8.64.4): query: SELECT popbox.cleartext AS password FROM popbox, domain WHERE popbox.local_part = 'eddie' AND popbox.domain_name = 'demo.wananchi.com' AND popbox.domain_name = domain.domain_name dovecot: May 30 12:00:04 Info: auth(default): client out: OK 1 user=eddie(a)demo.wananchi.com dovecot: May 30 12:00:04 Info: auth(default): master in: REQUEST 2 36772 1 dovecot: May 30 12:00:04 Info: auth-worker(default): sql(eddie(a)demo.wananchi.com,62.8.64.4): SELECT CONCAT(domain.path, '/', popbox.mbox_name) as home, 69 as uid, 6 as gid FROM popbox, domain WHERE popbox.local_part = 'eddie' AND popbox.domain_name = 'demo.wananchi.com' AND popbox.domain_name = domain.domain_name dovecot: May 30 12:00:05 Error: child 39853 (auth-worker) killed with signal 11 dovecot: May 30 12:00:05 Info: auth(default): master out: FAIL 2 dovecot: May 30 12:00:05 Info: pop3-login: Internal login failure: user=<eddie(a)demo.wananchi.com>, method=PLAIN, rip=62.8.64.4, lip=62.8.64.4, secured User's mail is stored in /var/spool/virtual/$domain/$user/{new,cur,tmp} The path /var/spool/virtual/ is owned by uid:gid 69:6, and is writeable by that uid. dovecot -n: # /usr/local/etc/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/dovecot.log protocols: imap pop3 listen(default): *:7143 listen(imap): *:7143 listen(pop3): *:7110 ssl_disable: yes disable_plaintext_auth: no shutdown_clients: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: exim login_greeting: Welcome. Dovecot is Ready to serve your emails. login_process_size: 64 login_max_processes_count: 200 verbose_proctitle: yes first_valid_uid: 69 first_valid_gid: 0 mail_extra_groups: dovecot:mail mail_location: maildir:/var/spool/virtual/%d/%n mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login digest-md5 cram-md5 verbose: yes debug_passwords: yes passdb: driver: sql args: /usr/local/etc/dovecot-sql.conf userdb: driver: sql args: /usr/local/etc/dovecot-sql.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 user: root group: wheel Here is a backtrace of the dovecot-auth crash: [root@ns2]#gdb /usr/local/libexec/dovecot/dovecot-auth dovecot-auth.core GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-freebsd"...(no debugging symbols found)... Core was generated by `dovecot-auth'. Program terminated with signal 11, Segmentation fault. Reading symbols from /usr/lib/libcrypt.so.2...(no debugging symbols found)...done. Reading symbols from /usr/lib/libpam.so.1...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/compat/pkg/libmysqlclient.so.10...(no debugging symbols found)...done. Reading symbols from /usr/lib/libm.so.2...(no debugging symbols found)...done. Reading symbols from /usr/local/lib/libsqlite3.so.8...(no debugging symbols found)...done. Reading symbols from /usr/lib/libc.so.4...(no debugging symbols found)...done. Reading symbols from /usr/lib/libz.so.2...(no debugging symbols found)...done. Reading symbols from /usr/libexec/ld-elf.so.1...(no debugging symbols found)...done. #0 0x805dc00 in userdb_blocking_lookup () (gdb) bt #0 0x805dc00 in userdb_blocking_lookup () #1 0x805dd50 in userdb_blocking_lookup () #2 0x806175a in sql_drivers_register_all () #3 0x8060d1c in sql_query () #4 0x805de62 in userdb_blocking_lookup () #5 0x8055724 in auth_stream_is_empty () #6 0x80557f4 in auth_stream_is_empty () #7 0x8055894 in auth_stream_is_empty () #8 0x80668ac in io_loop_handler_run () #9 0x80662a1 in io_loop_run () #10 0x805770f in main () #11 0x804fd52 in _start () (gdb) Please help! -Wash http://www.netmeister.org/news/learn2quote.html DISCLAIMER: See http://www.wananchi.com/bms/terms.php -- +======================================================================+ |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +======================================================================+ Hindsight is an exact science.

4 10

[Dovecot] AIX mail quota plugin problems
by Stewart Dean 05 Jun '07

05 Jun '07

From reading the wiki for a filesystem quota, I took my shot at 1) building my binaries using the mods in AIXPluginsSupport 2) changing dovecot.conf and 3) putting the plugins in the library But I'm getting this error message when I invoke dovecot: Plugin imap_quota not found from directory /usr/local/lib/dovecot Error: imap dump-capability process returned 89 It would seem that a) I have the syntax or the parameters wrong b) I didn't get the changes to the AIX build environment right I've attached the dovecot -n output. Here are the details of what I did. 1) dovecot.conf =========== within the imap config section =========== # Support for dynamically loadable plugins. mail_plugins is a space separated # list of plugins to load. #mail_plugins = #mail_plugin_dir = /usr/lib/dovecot/imap # SD 5/24/07 tryout FS quota plugin mail_plugins = quota imap_quota mail_plugin_dir = /usr/local/lib/dovecot/imap plugin { # Here you can give some extra environment variables to mail processes. # This is mostly meant for passing parameters to plugins. %variable # expansion is done for all values. # Quota plugin. Multiple backends are supported: # dirsize: Find and sum all the files found from mail directory. # Extremely SLOW with Maildir. It'll eat your CPU and disk I/O. # dict: Keep quota stored in dictionary (eg. SQL) # maildir: Maildir++ quota # fs: Read-only support for filesystem quota #quota = maildir # SD 5/24/07 Try FS quota support quota = fs I've tried it as both mail_plugin_dir = /usr/local/lib/dovecot/imap and mail_plugin_dir = /usr/local/lib/dovecot 2) Both ways I see this error message: > 4229 root@mercury:/usr/local/etc ## dovecot > ILoading modules from directory: /usr/local/lib/dovecot > IModule loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so > FPlugin imap_quota not found from directory /usr/local/lib/dovecot > Error: imap dump-capability process returned 89 > > 4272 root@mercury:/usr/local/lib/dovecot/imap ## dovecot > ILoading modules from directory: /usr/local/lib/dovecot/imap > IModule loaded: /usr/local/lib/dovecot/imap/lib10_quota_plugin.so > FPlugin imap_quota not found from directory /usr/local/lib/dovecot/imap > Error: imap dump-capability process returned 89 > 3) These directories have the following contents: 4292 root@mercury:/usr/local/lib/dovecot ## ls -al total 1168 drwxr-xr-x 3 root system 512 May 24 12:36 ./ drwxr-xr-x 7 root system 512 May 21 14:31 ../ -rw-r--r-- 1 root sys 292522 May 22 15:12 052207-1455-64bit-ssl.lib10_quota_plugin.a -rwxr-xr-x 1 root sys 904 May 22 15:12 052207-1455-64bit-ssl.lib10_quota_plugin.la* -rwxr-xr-x 1 root sys 270499 May 22 15:12 052207-1455-64bit-ssl.lib10_quota_plugin.so* drwxr-xr-x 2 root system 512 May 24 12:41 imap/ lrwxrwxrwx 1 root system 65 May 24 12:36 lib10_quota_plugin.a@ -> /usr/local/lib/dovecot/052207-1 455-64bit-ssl.lib10_quota_plugin.a lrwxrwxrwx 1 root system 66 May 24 12:36 lib10_quota_plugin.la@ -> /usr/local/lib/dovecot/052207- 1455-64bit-ssl.lib10_quota_plugin.la* lrwxrwxrwx 1 root system 66 May 24 12:36 lib10_quota_plugin.so@ -> /usr/local/lib/dovecot/052207- 1455-64bit-ssl.lib10_quota_plugin.so* root@mercury:/usr/local/lib/dovecot/imap ## ls -al total 152 drwxr-xr-x 2 root system 512 May 24 12:41 ./ drwxr-xr-x 3 root system 512 May 24 12:36 ../ -rw-r--r-- 1 root system 19250 May 22 15:12 052207-1455-64bit-ssl.lib11_imap_quota_plugin.a -rwxr-xr-x 1 root system 944 May 22 15:12 052207-1455-64bit-ssl.lib11_imap_quota_plugin.la* -rwxr-xr-x 1 root system 28645 May 22 15:12 052207-1455-64bit-ssl.lib11_imap_quota_plugin.so* lrwxrwxrwx 1 root system 66 May 24 12:36 lib10_quota_plugin.so@ -> /usr/local/lib/dovecot/052207- 1455-64bit-ssl.lib10_quota_plugin.so* lrwxrwxrwx 1 root system 75 May 24 12:36 lib11_imap_quota_plugin.a@ -> /usr/local/lib/dovecot/ima p/052207-1455-64bit-ssl.lib11_imap_quota_plugin.a lrwxrwxrwx 1 root system 76 May 24 12:36 lib11_imap_quota_plugin.la@ -> /usr/local/lib/dovecot/im ap/052207-1455-64bit-ssl.lib11_imap_quota_plugin.la* lrwxrwxrwx 1 root system 76 May 24 12:36 lib11_imap_quota_plugins.so@ -> /usr/local/lib/dovecot/i Any suggestions? -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

2 2

[Dovecot] testink
by Timo Sirainen 05 Jun '07

05 Jun '07

# Protocols we want to be serving: # imap imaps pop3 pop3s #protocols = imap imaps # IP or host address where to listen in for connections. It's not currently # possible to specify multiple addresses. "*" listens in all IPv4 interfaces. # "[::]" listens in all IPv6 interfaces, but may also listen in all IPv4 # interfaces depending on the operating system. You can specify ports with # "host:port". #imap_listen = * #pop3_listen = *

3 6

[Dovecot] Is there a "connect acl" ?
by Oliver Schulze L. 05 Jun '07

05 Jun '07

Hi, I have been reading the acl documentation and it seems that a "connect acl" is not available. I need to limit the users that can login in an IP number, is that posible with dovecot 1.0? (i.e. only these users can login from the Internet) Or a new plugin should be written? It is complicated to do that? Thanks Oliver -- Oliver Schulze L. | http://tinymailto.com/oliver Asuncion - Paraguay | http://www.solojuegos.mobi

4 5

[Dovecot] Backing up mail?
by Knute Johnson 04 Jun '07

04 Jun '07

My mail server is running on a Fedora FC5 box. I need to move the mail server to another computer and so I need to back up my user's mail and move it. I have found mail in /var/spoo/mail/[users] and in their home directories there is a 'mail' directory. All users have an 'Inbox' file that is empty and I think the one IMAP user has a 'Trash' file that is huge! Are those the only files I need to copy or are there others lurking out there that I don't know about? Thanks, -- Knute Johnson Molon Labe...

1 0

[Dovecot] tweaking performance
by Paul A 04 Jun '07

04 Jun '07

Hi, I was wondering if anyone had some ideas on what I can tweak to gain more performance. We have tome timeouts reports on pop3 during heavy load periods. Using imap/pop3 with maildir with 7,000 users using mostly pop3. # /usr/local/etc/dovecot.conf protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: Cape.Com D-V.1 wpam - ready. login_processes_count: 16 login_max_processes_count: 500 max_mail_processes: 9000 mail_location: maildir:/home/%1u/%u/Maildir maildir_copy_with_hardlinks: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %v.%u pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: count: 6 passdb: driver: pam userdb: driver: passwd TIA, PA

2 1

[Dovecot] dovecot-shared tries to fchown index+control files but fails
by Adam McDougall 04 Jun '07

04 Jun '07

I have some public mailboxes setup in 1.0.0, location = maildir:/egr/mail/shared/org:CONTROL=%h/Maildir/dovecot/public/control/org:INDEX=%h/Maildir/dovecot/public/indexes/org I also have a dovecot-shared file in the maildir folders so messages that are added to the inbox get a decent set of default permissions. However, I think dovecot is also trying to fchown the index files (stored in a user home directory, far away from the shared mail) to match the owner of the dovecot-shared file. When I rename dovecot-shared, these errors (apparently harmless at this point) go away: May 24 18:45:35 hostname dovecot: IMAP(username): fchown(/home/username/Maildir/dovecot/public/control/org/.mailfolder/dovecot-uidlist) failed: Operation not permitted May 24 18:45:35 hostname dovecot: IMAP(username): fchown() failed with file /home/username/Maildir/dovecot/public/indexes/org/.mailfolder/dovecot.index.log: Operation not permitted At this point it is just clogging up the log, but I see two issues: 1. Isn't dovecot already running as the imap user, so as long as that user isn't root, it shouldn't be possible to change file owners at all. This is the behavior I see of dovecot-shared on new mail files, that is the group and file mode from dovecot-shared are applied, but not the owner. 2. Since these kind of metadata files aren't generally supposed to be shared anyway, why would it even want to change the permissions? Especially since I have them stored in a place where the user has ownership already. Please let me know if I am missing something, or a behavior change is needed. Thanks.

2 4

[Dovecot] Client certificate verification/authentication
by eizert 04 Jun '07

04 Jun '07

I would like to use Client certificate verification/authentication. My MTA used this function. I've a problem to make a valid certificate. For my MTA i used : openssl req -new -nodes -x509 -keyout user_key.pem -out user_req.pem -days 365 openssl ca -out user_signed.pem -infiles user_req.pem openssl pkcs12 -in user_signed.pem -inkey user_key.pem -out user.p12 -export -name "user@hotsname" user.p12 match in my MTA Not in Dovecot... In my log, i've simply : dovecot: auth(default): Client didn't present valid SSL certificate Also, in the documentation The username is taken from the subject's DN's CommonName <http://wiki.dovecot.org/CommonName> field (using OpenSSL's X509_NAME_get_text_by_NID() function). But when i used openssl req -new -nodes -keyout user_key.pem -out user_req.pem -days 365 my common name is my hostname not my username. I don't think that the option -name user@hostname (in manpage openssl :: -name is friendly name)... Sorry but it's ambiguous for me...

2 4

[Dovecot] dovecot-sieve-1.0 (hg) does not build
by Bernhard Schmidt 04 Jun '07

04 Jun '07

Hi, the dovecot-sieve plugin from the hg repository (http://hg.dovecot.org/dovecot-sieve-1.0/) does not build against current dovecot-1.0 repository. /bin/bash ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -DENABLE_REGEX -o sievec sievec.o map.o imparse.o libsieve.la /usr/src/dovecot-1.0/src/lib/liblib.a gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -DENABLE_REGEX -o sievec sievec.o map.o imparse.o /.libs/libsieve.a /usr/src/dovecot-1.0/src/lib/liblib.a /.libs/libsieve.a(script.o): In function `sieve_script_parse': /usr/src/dovecot-sieve-1.0/src/libsieve/script.c:140: undefined reference to `yylineno' /.libs/libsieve.a(sieve.o): In function `sieveerror': /usr/src/dovecot-sieve-1.0/src/libsieve/sieve.y:568: undefined reference to `yylineno' /.libs/libsieve.a(sieve.o): In function `sieveparse': /usr/src/dovecot-sieve-1.0/src/libsieve/sieve.c:1644: undefined reference to `sievelex' /.libs/libsieve.a(sieve.o): In function `sieve_parse': /usr/src/dovecot-sieve-1.0/src/libsieve/sieve.y:551: undefined reference to `yyrestart' /.libs/libsieve.a(addr.o): In function `addrparse': /usr/src/dovecot-sieve-1.0/src/libsieve/addr.c:1289: undefined reference to `addrlex' collect2: ld returned 1 exit status make[3]: *** [sievec] Error 1 make[3]: Leaving directory `/usr/src/dovecot-sieve-1.0/src/libsieve' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/src/dovecot-sieve-1.0/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/src/dovecot-sieve-1.0' make: *** [all] Error 2 dovecot-sieve-1.0.1.tar.gz builds fine. 1.0.1 is from January 2007, the last changes in the hg repository are three months ago, but none of them look like they would be causing this issue. Also there is no r_1_0_1 tag. It looks to me like 1.0.1 is something quite different to the hg-repository, right? Does the latter compile against anything at the moment? Thanks, Bernhard

2 3

[Dovecot] Sharing nested folders / maildir variations?
by SeattleServer.com 04 Jun '07

04 Jun '07

Hey all, So I've got a shared namespace in dovecot where users can, via a custom control panel, share their folders into (which creates a symlink) in order to allow anyone on their domain to access it. I store mail in maildir. The issue is that when people share folders, they expect that when they make subfolders, those are automatically shared as they are contained within it. According to the Maildir++ specification, "Can folders have subfolders, defined in a recursive fashion? The answer is no. If you want to have a client with a hierarchy of folders, emulate it. Pick a hierarchy separator character, say ":". Then, folder foo/bar is subdirectory .foo:bar." It says some other stupid things too though that nobody seems to actually follow, and I've never actually seen anything but a '.' used as the delimiter... The same is true in IMAPdir: "As with Maildir++, submailboxes can not be represented in a recursive fashion in the file system. The mailbox' representation name will contain the soft hierarchy delimiter character dot '.', and all mailboxes must reside in the same root level directory." I don't understand the reasoning behind avoiding recursion, honestly. If somebody wants to enlighten me on that one, it would be appreciated. i.e. instead of: .Folder/{cur,new,tmp} .Folder.SubFolder1/{cur,new,tmp} .Folder.SubFolder1.foo/{cur,new,tmp} .Folder.SubFolder1.bar/{cur,new,tmp} .Folder.SubFolder2/{cur,new,tmp} We'd have: .Folder/{cur,new,tmp} .Folder/.SubFolder1/{cur,new,tmp} .Folder/.SubFolder1/{cur,new,tmp} .Folder/.SubFolder1/.foo/{cur,new,tmp} .Folder/.SubFolder1/.bar/{cur,new,tmp} .Folder/.SubFolder2/{cur,new,tmp} That would both solve my issue and be a lot more convenient when browsing/scripting around maildirs (i.e. "cd ../.foo" vs "cd ../.Folder.Subfolder1.foo"). It seems to me that this would be a really easy thing to add support for via the config option used to choose between maildir/mbox/dbox. Call it rmaildir or somesuch... Thoughts? Cheers, -- Casey Allen Shobe | mailto:casey@shobe.info | http://casey.shobe.info SeattleServer.com, inc. | http://seattleserver.com

2 3

[Dovecot] Dovecot waking every 50ms when doing nothing
by Ross Burton 04 Jun '07

04 Jun '07

Hi, My laptop runs a local IMAP server so that I'm immune from breaking my mail client, and when playing around with powertop I discovered that Dovecot (in particular imap-login) wakes up every 1000ms and then every 50ms even when no clients are connected. A bit of stracing shows this: gettimeofday({1180875699, 667917}, NULL) = 0 <0.000010> poll([{fd=7, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=3, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=0, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 5, 999) = 0 <0.999595> gettimeofday({1180875700, 667627}, {4294967236, 0}) = 0 <0.000007> gettimeofday({1180875700, 667670}, NULL) = 0 <0.000007> poll([{fd=7, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=3, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=0, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 5, 0) = 0 <0.000006> gettimeofday({1180875700, 667762}, {4294967236, 0}) = 0 <0.000007> gettimeofday({1180875700, 667801}, NULL) = 0 <0.000006> poll([{fd=7, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=10, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=3, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=0, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}, {fd=1, events=POLLIN|POLLPRI|POLLERR|POLLHUP|POLLNVAL}], 5, 999) = 0 <0.999699> gettimeofday({1180875701, 667638}, {4294967236, 0}) = 0 <0.000010> Is there any reason why dovecot wakes up so frequently even when there is apparently nothing to do? If it is to perform some routine task, can this timeout be extended? There are many daemons on my machine (lighttpd is another) that are waking up every second when nothing is happening, and each of these is contributing to waking the CPU from sleep. Cheers, Ross -- Ross Burton mail: ross(a)burtonini.com jabber: ross(a)burtonini.com www: http://www.burtonini.com./ PGP Fingerprint: 1A21 F5B0 D8D0 CFE3 81D4 E25A 2D09 E447 D0B4 33DF

7 16

[Dovecot] frequent index rebuilds versus disabled indexes
by Justin McAleer 04 Jun '07

04 Jun '07

Ok, here's the short and sweet version of my dilemma. I have a group of servers mounting a shared NFS device to hold mail data for many different domains. Is it worth the load balancing management nightmare of setting up dedicating smtp, pop, and imap to one server (failing over to another in the group if the server goes down) to keep indexes on local disk? It's very tempting to just disable indexes and not worry about which server a user hits, and considering the vast majority of our 170,000 accounts only have about a 20MB quota, I'm not sure indexes will help that many users. Although, I guess I would need to work out something for the few huge accounts we do have.

2 1

[Dovecot] Quota handling - v2 - updated FR
by Charles Marcus 04 Jun '07

04 Jun '07

This revised proposal for a Feature Request is the result of my desire to implement quotas, but not have the attendant headaches that inevitably accompany its implementation. Ralf Hildebrandt wrote: > I have to face it, my users are retards: Is there any other kind of user? ;) <snip> > Thus I need a feature in dovecot that will tell them via email: > > Level1: "You ALMOST exceeded your quota, you're at 90% now" > Level2: "You're very close to exceededin your quota, you're at 95% > now" > Level3: "Would you please clean up now? You're at 99% now" What I'd *really* like to see implemented is something along the lines outlined below - but of course, this will depend entirely on whether or not Timo thinks it is doable - or desirable... I'm thinking this would be best handled by the Quota plug-in - either as part of the current one, or as a separate/different one... *** 1. Have a 'special' user-specific folder (by special, I mean like the Drafts, Sent, Templates folders) that dovecot controls. For purposes of this FR, call it the 'over-quota' folder. Question: could the .tmp folder be used for this? No sense in reinventing the wheel if necessary... and then if someone migrated from dovecot to something else, and messages were left in there from an over-quota condition, that other solution would most likely just move these to .new the first time it ran, right? Or, possibly, could dovecot create a new one maybe, .oqt (for over-quota), and store the queued messages there until the over-quota condition was rectified? Anyway, the main thing is, this folder should be essentially hidden from the user so they do *not* have access to it, and should temporarily hold messages that come in that are unable to be delivered due to an over-quota condition. *** 2. Make dovecot aware of and use a special 'Quota Status' message that it uses to inform a user that they are over quota. This message should be able to be customized, with variables (like, for example, it should list the messages that are currently being prevented from being moved to the Inbox - including, optionally, the Subject, the sender, date/time, attachments, size, etc - as well as provide general quota information (ie, how close to or over quota they are, and how much they'd need to delete or move to Local Folders to allow delivery of all of the messages being held), and lastly, any custom information the System Admin wanted to provide - like, maybe, specific instructions for how to move messages to Local Folders, how to request additional storage allowance, etc. *** 3. When user is over quota, have LDA deliver to the folder referenced above (# 1) - (yes, accept the message for final delivery from the sending mta), and then update the Quota Status message and move it to the Inbox. Optionally, a bounce/notification could be generated to the sender, informing them that their message is being 'held in queue' or something to that effect, due to the recipient being over-quota. *** 4. Once the user deletes enough mail to come back under quota, dovecot would then move messages from the 'over-quota' folder to his Inbox. Ok, again, am willing to hear *valid* reasons how/why this is a terrible idea... :) -- Best regards, Charles

6 10

[Dovecot] delivery and quota question
by Arkadiusz Miskiewicz 04 Jun '07

04 Jun '07

Hi, I'm considering using delivery for delivering emails. The question is about quota. Does delivery check quota for single maildir or for entire collection of user folders? Example: /var/mail/user/{new,cur,tmp} /var/mail/user/.Some_Folder/{new,cur,tmp} /var/mail/user/.Some_Other_Folder/{new,cur,tmp} Can I somehow get deliver checking size for all these folders? I need quota per user not per folder. -- Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/

2 1

[Dovecot] Simple questions about Quota
by Venilton Junior 04 Jun '07

04 Jun '07

Hi folks, hope that get some help for some doubts :P I've configured dovecot in a clustered environment 3 X HP Proliant DL380+RHEL ES 4.0+EVA4000+GFS. Everything is working great. But, when I putted this cluster on production, I had some problems with quota+ldap in my dovecot. Here follows my configuration: /etc/dovecot.conf last_valid_gid = 101 maildir_copy_with_hardlinks = no login_greeting = Internet ready. disable_plaintext_auth = no auth_default_realm =domain.com.br protocol imap { mail_plugins = imap_quota quota } protocol lda { postmaster_address = postmaster(a)domain.com.br <mailto:postmaster@domain.com.br> mail_plugins = quota } protocol pop3 { pop3_uidl_format = %08Xu%08Xv mail_plugins = quota } auth default_with_listener { mechanisms = plain login userdb ldap { args = /etc/dovecot-ldap.conf } passdb ldap { args = /etc/dovecot-ldap.conf } socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } } } plugin { quota = maildir } /etc/dovecot-ldap.conf ... user_attrs = mail,homeDirectory,,,,quota=quota=maildir:storage user_filter = (&(objectClass=VirtualMailAccount)(mail=%u)(accountActive=TRUE)(delete=F ALSE)) I'm heaving heavy load of e-mails in this environment, so this problem started to happen: Almost all users have 100MB of quota, that's ok for us and we are storing 102400 at our ldap. But, when I put this configuration working on, all clients receive overquota messages. If I'm using quota information in my ldap server, do I have to use this option in my dovecot.conf file? plugin { quota = maildir } Tnx for any help and/or tips. Regards, Venilton C. Junior HP Certified Professional Sercompe Computadores Ltda. Office: +55 47 3431-9700 Fax: +55 47 3431-9747 Mobile: +55 47 9653-5872 www.sercompe.com.br <http://www.sercompe.com.br/>

2 1

[Dovecot] Dovecot and Seamonkey/Mozilla "delete attachment"
by Bryce Nesbitt 04 Jun '07

04 Jun '07

I'm having persistent trouble deleting larger attachments from messages in Mozilla/Seamonkey mail, and I'm thinking it may be related to Dovecot. A bug report is over at https://bugzilla.mozilla.org/show_bug.cgi?id=381759 I do not have the version number of Dovecot available, unless you know how to get it from the IMAP prompt: > telnet idiom.com 143 Trying 216.240.32.1... Connected to idiom.com. Escape character is '^]'. * OK Dovecot ready. How can I track this down more? Is anyone using Seamonkey and this particular new feature (delete the attachment, but keep the message body intact)?

2 1

[Dovecot] Error: no authentication failed
by gaoqiang.qian＠nokia.com 04 Jun '07

04 Jun '07

Hi, I have installed the dovecot on my redhat linux host. But when I log in with dovecot/test I got Error: no authentication failed after I got ok dovecot ready when I connect to local host. dovecot/test was set in the password.dovecot file. But I do not know how can I use this username and password in the configuration file. Could anyone give me a hand to let me know how to configurate the username and password for login. Thanks

2 1

[Dovecot] Overriding IMAP commands
by Tony Tsang 04 Jun '07

04 Jun '07

Hi all, I am writing a plugin to override some built-in imap commands. But when client logs out, imap segfaults during unregistering commands. What is the correct procedure for overriding imap commands in dovecot? Thanks. Tony Tsang.

2 1

Re: [Dovecot] Namespace Problems
by Kenny Dail 04 Jun '07

04 Jun '07

> Hi all, > > after an update from dovecot beta version to 1.0.0.-1 today morning I > had different effects: > thunderbird-, kmail-, Apple-clients, pine and squirrelmail could > receive email correct with imaps. But not MSOutlook!!! > Varying the namespace configurations in dovecot.conf I got different > results with MSOutlook working but with thunderbird, squirrelmail etc. > all folders are displayed but not the root Inbox etc. > Its important to know that I migrated from courier-imap to dovecot. > > My well working namespace config BEFORE upgrade to 1.0.0-1: > > Here my actual namespace configs: > > namespace private { > separator = > prefix = INBOX. > inbox = no > hidden = no > } > namespace private { > separator = / > prefix = INBOX/ > inbox = no > hidden = yes > } > namespace private { > separator = . > prefix = INBOX. > inbox = yes > hidden = yes > } > Try it using only one namespace which matches what you are really doing. With 1.0 this works for me with all clients I've tried, including Apple. namespace private { separator = . prefix = INBOX. inbox = yes hidden = no } > In varying inbox and hidden keywords I found this configuration. Most > things are working with this but in squirrelmal I can't access inbox, > the main folder. > > How do I have to configure that everythings works satisfying?? > > dovecot.conf and dovecot-sql.conf I send in the attachment. instead of sending dovecot.conf, next time use dovecot -n -- Kenny Dail <kend(a)amigo.net>

3 2

[Dovecot] Stop Maildir appending to path
by Henry 04 Jun '07

04 Jun '07

dovecot -n: # /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps ssl_listen: 208.xxx.xxx.xxx login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_extra_groups: mail mail_debug: yes auth default: passdb: driver: pam passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 user: vmail ---------------------- dovecot version: 1.0.rc15 ---------------------- Debian Etch (Stable) on AMD64

3 2

[Dovecot] What are they trying to do here?
by Jon Slater 04 Jun '07

04 Jun '07

Hi! I’m new to the list, and I’m not really having a ‘problem’, but I’m seeing something in my log files that I wonder if I should be concerned. I’ve been using Dovecot (dovecot-0.99.14-8.fc4) on my Fedora Core 4 (kernel 2.6.17-1.2142_FC4) machine from quite some time. For the last few days, I’ve been seeing this in my daily ‘Logwatch’ e-mail: dovecot: Authentication Failures: rhost= : 139 Time(s) root: 13 Time(s) Unknown Entries: check pass; user unknown: 139 Time(s) So it looks pretty obvious that someone (using root and an assortment of other login names) is trying to access by dovecot server. My first ‘issue’ is I can’t find a log file anywhere that tells me the IP address of the attacker. I see a series of ‘authentication failure’ messages in my /log/messages file: May 29 21:23:35 mydomainname dovecot(pam_unix)[15317]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=root May 29 21:23:35 mydomainname dovecot(pam_unix)[15318]: check pass; user unknown May 29 21:23:35 mydomainname dovecot(pam_unix)[15318]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= May 29 21:23:36 mydomainname dovecot(pam_unix)[15320]: check pass; user unknown May 29 21:23:36 mydomainname dovecot(pam_unix)[15320]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= But I don’t find anything in any other log files to indicate where this is coming from. Secondly, I’m wondering if I have anything to be concerned about. Thanks in advance for you help! Jon No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.3/824 - Release Date: 5/29/2007 1:01 PM

2 1

[Dovecot] dovecot scaling issue?
by it-dovecot＠ml.epigenomics.com 04 Jun '07

04 Jun '07

Hi! We are running dovecot-imapd on Debian sarge out of the backports.org packages (version 1.0.rc15-1~bpo1). We have ~ 80 clients using secure IMAP. I understand that imap-login has to run for every SSL connection. Thus I already increased the max value for the number of imap-login processes. But unfortunately dovecot is unresponsive from time to time. Where can I tune the installation? Do I need to upgrade to 1.0.0, for which no backported packages exist for Debian sarge? This is the output of dovecot -n: log_timestamp: %Y-%m-%d %H:%M:%S listen: *:143 ssl_listen: *:993 ssl_cert_file: /etc/courier/imapd.pem ssl_key_file: /etc/courier/imapd.pem disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_processes_count: 12 login_max_processes_count: 512 verbose_proctitle: yes mail_location: maildir:~/.Maildir:INDEX=/var/cache/dovecot/INBOX.%u:CONTROL=/var/cache/dovecot/INBOX.%u mail_full_filesystem_access: yes maildir_stat_dirs: yes maildir_copy_with_hardlinks: yes namespace: type: private separator: . prefix: INBOX. inbox: yes namespace: type: public separator: . prefix: shared. location: maildir:~/.Maildir/shared:INDEX=/var/cache/dovecot/shared.%u:CONTROL=/var/cache/dovecot/shared.%u auth default: verbose: yes passdb: driver: passwd userdb: driver: passwd Homedirectories are on NFS, /var/cache/dovecot is a local filesystem. Clients are mostly Thunderbird, where max connection to IMAP server is set to 5. Greetings -- Robert Sander Senior Manager Information Systems Epigenomics AG Kleine Praesidentenstr. 1 10178 Berlin, Germany phone:+49-30-24345-0 fax:+49-30-24345-555 http://www.epigenomics.com robert.sander(a)epigenomics.com

2 1

[Dovecot] Dovecot support for smd5 and ldap-md5
by Eric and Barbara Sammons 04 Jun '07

04 Jun '07

Working with a dovecot migration, I am curious what version (if any) of Dovecot (dovecot-auth) supports SMD5 and ldap-MD5 when using Dovecot -> OpenLDAP direct binding? Thank you! Eric

2 1