- dovecot - dovecot.org

[Dovecot] Time moving backwards error
by Matthew Ward 12 Mar '07

12 Mar '07

I'm currently running a VPS which has the NTP daemon running on neither my CentOS installation nor on the hardware node itself, so as far as I am aware the server time shouldn't be being resynched by anything, and the time should be consistent. However, since r25 my Dovecot service is complaining that time is moving backwards (was being killed only a few moments after being started with r25, same problems as Emmett with r26) quite consistently, and always by one second. Could this simply be an error or something within Dovecot itself, as to have nothing physically updating the system time on my machine at all and to have Dovecot complaining that it's being resynched by one second all the time seems a bit odd?

4 4

Re: [Dovecot] separate partition for index/uidlist
by Daniel 11 Mar '07

11 Mar '07

> ... [...] Just one more question: is it wise to copy over the index files and the dovecot-uidlist files to the new locations, or dovecot will regenerate them? Daniel

2 3

[Dovecot] Upgrade from 0.99 to 1.0
by Láďa 11 Mar '07

11 Mar '07

Hi, I have just noticed that one our box is still running ancient 0.99 version (shame on me). Is there anything what I have to take care about during update? I am completely aware about changes in configuration files so my question is mainly about existing maildirs. Láďa

2 2

[Dovecot] separate partition for index/uidlist
by Daniel 11 Mar '07

11 Mar '07

Hi! What's a safe place for the separate index and uidlist files? I am planning to configure Quota/FS. Can they reside under dovecot's basedir? Is this a good idea? Does it have any significance where I put those files? Thanks, Daniel

2 6

[Dovecot] in memory indexes?
by Daniel 11 Mar '07

11 Mar '07

Hi! > RCS file: /home/cvs/dovecot/src/lib-index/mail-index.c,v > Working file: src/lib-index/mail-index.c > revision 1.268 > date: 2007-03-11 16:10:42 +0000; author: tss; state: Exp; lines: > > +8 -5; commitid: yo3GJUvm1yKgLG9s; > If we run out of disk space, move to in-memory indexes. I just saw the commit. Is this a "solution" for the Quota/FS problem, the problem which occurs when the quota is full, and dovecot can not update it's index files? Daniel -- LeVA

2 3

[Dovecot] (no subject)
by Erdenebat Gantomor 11 Mar '07

11 Mar '07

In Postfix+Postfixadmin+Dovecot+SASL+MySQL case what is the best and compact MySQL database structure for storing all configuration? What will you suggest me guys? I've already installed postfixadmin and I'm confusing (actually my experience is not enough) extending and organizing my database for postfix+dovecot. Please give me some quick tips. -- Best regards, Erdenebat Guntomor/ /mailto:RkLogin@gmail.com

1 0

[Dovecot] FreeBSD 6.1-RELEASE/kqueue high CPU load
by Taras Savchuk 11 Mar '07

11 Mar '07

Hi to ALL! I have dovecot-1.0r7 installed on FreeBSD 6.1, using kqueue and Maildir (<20 mailboxes, < 0,5 Gb size). Periodically CPU load of imap processes increasing up to 60-80%. Is it normall behavior or not? May be somebody had such kind of problems? -- С уважением, Савчук Тарас ООО "Элантек" : Аутсорсинг ИТ, WEB-разработка +7 (495) 589 68 81 +7 (926) 575 22 11 http://www.elantech.ru info(a)elantech.ru

8 32

[Dovecot] dovecot and pine tab-completion
by Kyle Wheeler 11 Mar '07

11 Mar '07

Hello, So, I'm migrating from Binc to Dovecot, and one of my users has run into an odd complaint/issue. I don't know that it's a Dovecot issue necessarily, but maybe the people here know a fix anyway... The problem is that pine tab-completion now appends a "." to the end of folders that have sub-folders. In other words, say the user has these folders: INBOX INBOX.foo INBOX.foo.bar When he types in INBOX.f and hits tab, for some reason Pine completes that to: INBOX.foo. Note the "." on the end. This is annoying, because then to get into foo he has to hit the delete key first. With the Binc server, the delimiter was /, and INBOX/foo/ was a perfectly legitimate folder name (so he could just hit return). Does anyone have any suggestions for how to fix this? ~Kyle -- There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order. -- Ed Howdershelt

2 3

Re: [Dovecot] Dovecot Stable Version
by Erdenebat Gantomor 10 Mar '07

10 Mar '07

First I'm not enough in English. Therefore sorry about that. I mean just asking about roadmap. I just don't wanna force anyone. Sorry again Timo if i was bugging you. Best regards, Erdenebat Guntomor/ /mailto:RkLogin@gmail.com Charles Marcus wrote: > Erdenebat Gantomor wrote: >> Dovecot is now in release candidate. When will release stable? Is it >> safe to use in production? I mean now the Dovecot is stable enough to >> use in production? > > <sigh> > > Please stop bugging Timo about this... he will release it when it is > ready. > > Seriously - if you want a release version, I'm sure Timo will gladly > accept your payment and provide one. >

2 1

[Dovecot] logging volumes
by Kyle Wheeler 10 Mar '07

10 Mar '07

Hello! I’m in the process of migrating from BincIMAP to Dovecot, and I have a minor question. One of the things that Binc does is logs how many bytes of data it has sent as part of logging the log-out. Is there a way to get Dovecot to do that, or to calculate something similar? ~Kyle -- Racism is man's greatest threat to man---the maximum of hatred for a minimum of reason. -- Abraham Joshua Heschel

2 2

[Dovecot] Warning: I/O leak
by Steffen Kaiser 10 Mar '07

10 Mar '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, there is message from Jim Horner (16 November 2006 17:02:44) about this issue, too. For testing I start dovecot with dovecot -F, when I kill it via ^C sometimes there are log entries like this: dovecot: Mar 07 10:10:13 Warning: I/O leak: 0x804d890 (15) dovecot: Mar 07 10:10:13 Warning: I/O leak: 0x804d890 (26) (gdb) x 0x804d890 0x804d890 <login_process_input>: 0x81e58955 I guess it's not important because Dovecot is interrupted. Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEUAwUBRe6DsC9SORjhbDpvAQIqPAf3YHKm9L4IjUEx72yfdlV5P/aCfjrTDby/ HVWTBZeYjyld5I3thxfPNU/gV9eklZlozvHw03Z0LwKejcQsVWLc1g6jbJIYcnlC fNARkgtJj3Hy8Fn6QKhHr4keiAiedVTrf0gTq+NtcTmLGgVREhnJWBift8efx12s cnxH7YaL+Mj9+BwqdyQ5DcALCFwsHSI7IROHobP8ZnfqAkpgwAnCuo8140C31g+t XamPVuSVnsTnObXh6ki64TFuTk+FvhuyzH3NhroUXKS0Tl21l7E6+sMH2m39junI uS6p3Yweg193qtJwh4KmYutco9SBKp7V85gbpz6EpSDgYgG9rI5o =MgrB -----END PGP SIGNATURE-----

2 1

[Dovecot] Wish to improve logging
by Steffen Kaiser 10 Mar '07

10 Mar '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I had a problem in my test configuration, therefore I want to suggest to improvements for logging: 1) mail_log - add mailbox of operation dovecot: Mar 07 09:35:16 Info: IMAP(dvtest) [16829]: expunged: uid=886, msgid=<xxxxxxxxxxxxxx.xxxxxxxxxxx(a)xxxxxxxx.xx-xxxx-xxxxx-xxxx.xx> dovecot: Mar 07 09:35:16 Info: IMAP(dvtest) [16829]: expunged: uid=887, msgid=<xxxxxxxxxxxx.xxxxx.xxxxxxxxx.xxxxxxxx(a)xx-xxxx-xxxxx-xxxx.xx> Please add, from which folder the mail is deleted/expunged, because uid is no unique throughout the mail storage and I do not find no tracking in which mailbox the operation happens. 2) Login - add which passdb / userdb the data was gathered from dovecot: Mar 07 09:34:03 Info: auth(default): ldap(dvtest,10.20.10.63): bind search: base=dc=fh-bonn-rhein-sieg,dc=de filter=(&(objectClass=fhMailAlias)(uid=dvtest)) dovecot: Mar 07 09:34:03 Info: auth(default): ldap(dvtest,10.20.10.63): result: uidNumber(userdb_uid)=1012 gidNumber(userdb_gid)=102 homeDirectory(userdb_home)=/home/dvtest uid(userdb_user)=dvtest mailLocationDovecot(userdb_mail)=maildir:/home/dvtestMAIL/MailDir:INDEX=/var/cache/dovecot/1012/index:CONTROL=/var/cache/dovecot/1012/index/control dovecot: Mar 07 09:34:03 Info: auth(default): ldap(dvtest,10.20.10.63): bind: dn=uid=dvtest,ou=staff,dc=fb02,dc=fh-bonn-rhein-sieg,dc=de dovecot: Mar 07 09:34:03 Info: auth(default): ldap(dvtest,10.20.10.63): invalid credentials dovecot: Mar 07 09:34:03 Info: auth(default): client out: OK 1 user=dvtest dovecot: Mar 07 09:34:03 Info: auth(default): master in: REQUEST 1 16810 1 dovecot: Mar 07 09:34:03 Info: auth(default): prefetch(dvtest,10.20.10.63): passdb didn't return userdb entries dovecot: Mar 07 09:34:03 Info: auth(default): ldap(dvtest,10.20.10.63): user search: base=dc=fh-bonn-rhein-sieg,dc=de scope=subtree filter=(&(objectClass=fhMailAlias)(uid=dvtest)) fields=homeDirectory,uidNumber,gidNumber,mailLocationDovecot,uid dovecot: Mar 07 09:34:03 Info: auth(default): master out: USER 1 dvtest uid=1012 gid=102 home=/home/dvtest user=dvtest mail=maildir:/home/dvtestMAIL/MailDir:INDEX=/var/cache/dovecot/1012/index:CONTROL=/var/cache/dovecot/1012/index/control dovecot: Mar 07 09:34:03 Info: pop3-login: Login: 16810:, user=<dvtest>, method=PLAIN, rip=10.20.10.63, lip=10.20.10.166 First I didn't realized any problem at all ;) and assumed LDAP bind working. Dovecot successfully reads the LDAP attributes for the user dvtest, however, the LDAP bind fails with "invalid credentials", yet, dvtest was allowed to login. The reason is simple: When I was testing the LDAP bind stuff, I "commented out" the user dvtest in /etc/passwd, but not in "/etc/shadow" and intentionally used another password in LDAP. Dovecot is configured to consult userdb/passdb ldap, first, then pam. In my case, the LDAP bind failed, so Dovecot fall back to pam - just as configured. I would like suggest to log wich passdb / userdb Dovecot gathered the information from, because, at first, I interpreted the log file as if Dovecot allows an user to login, who is not authentificated. Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRe6N+y9SORjhbDpvAQJITQf6AmueszP73MBoG5mPRzB0mEzKC9jmY+gb eepPjBZp7yqXnACt7hOjcI0ckLZpgmQd4TbwVmO1otJaaQa/UZvgy1pV7gXeMTVs RZnAT7qiT7j+RB54yg1nT65/W9VmP3ymp41pi+qlWfC3qaVwsFk9hgarQC1FzF/w tD92cT8vvLPzXXf22xO6bmeTW4xg6fsUWbC7BiL461qJTMXjHGZdMwU7jPbTrI3c iYAel2jKAMaspgTpz/sEg3Yjka2tafinItnah8Q9HIQGixzUlV750NULx/jR8Cop 1ufFZSigkVRY25XpxESgCAaKQg3LsB7rnZOVyG/hA3KDmyh2+nu9Yw== =WUyX -----END PGP SIGNATURE-----

2 1

[Dovecot] RV: deliver configuration
by Luis Venegas 10 Mar '07

10 Mar '07

Sorry, but I can't see a file named auth-master in any place... Luis Venegas wrote: > Hi., > > I am trying to configure Virtual Users. Whenever I use: > "virtual_transport = dovecot" I get: > > deliver(user_at_domain): > net_connect(/usr/local/var/run/dovecot/auth-master) failed: No such file > or directory > See: http://wiki.dovecot.org/LDA You probably didn't define the 'socket listen' or it's a different path. --Chris __________ Información de NOD32, revisión 2105 (20070309) __________ Este mensaje ha sido analizado con NOD32 antivirus system http://www.nod32.com

2 1

[Dovecot] deliver configuration
by Luis Venegas 09 Mar '07

09 Mar '07

Hi., I am trying to configure Virtual Users. Whenever I use: "virtual_transport = dovecot" I get: deliver(user_at_domain): net_connect(/usr/local/var/run/dovecot/auth-master) failed: No such file or directory But it works when I use: "virtual_transport = virtual" What am I doing wrong? Thank you !

2 1

[Dovecot] Vexim with LDA delivery
by Chris Wopat 09 Mar '07

09 Mar '07

No support help needed, just a success report having Dovecot integrate with Vexim (exim with web based frontend and sql db): http://silverwraith.com/vexim/ Just wanted to forward some configs to the list if anyone finds them useful. I just switched from vexim's normal "virtual_delivery" to "dovecot_virtual_delivery" so I could use sieve, which works nicely with Horde. This is mostly as described on the wiki: http://wiki.dovecot.org/LDA I'm using maildirsize in my case. There were a few things that had to be done to get it to work with quotas, I thought I would just spell it all out for anyone reading this list in the future: I can add stuff if anyone would like to the wiki, some of these items are elsewhere in the wiki, I wanted to ask before I put a full page up for integration with Vexim in particular. Should I do this, or just throw bits and peices where they seem relevant? This was on FreeBSD, hence the /usr/local/etc/ stuff. Exim's 'configure' file: ================================ virtual_domains: #file_transport = virtual_delivery file_transport = dovecot_virtual_delivery virtual_domains_catchall: #file_transport = virtual_delivery file_transport = dovecot_virtual_delivery dovecot_virtual_delivery: driver = pipe command = /usr/local/libexec/dovecot/deliver -d \ $local_part@$domain message_prefix = message_suffix = delivery_date_add envelope_to_add return_path_add log_output user = mailnull dovecot-sql.conf: ================================ driver = mysql connect = host=HOSTNAME dbname=vexim user=vexim password=PASSWORD default_pass_scheme = CRYPT password_query = SELECT crypt as password FROM users,domains \ WHERE users.username = '%u' AND users.enabled = '1' \ AND users.type='local' and domains.enabled='1' \ AND domains.domain_id = users.domain_id user_query = SELECT pop AS home, 26 AS uid, 26 AS gid, \ CONCAT('maildir:storage=', quota*1024) AS quota \ FROM users WHERE username = '%u' AND enabled = '1' Mostly complete dovecot.conf (much of this is obvious, but it's easier than piecing things together from various mailing lists posts/docs): ================================ mail_location = maildir:%h/Maildir first_valid_gid = 26 last_valid_gid = 26 protocol lda { mail_plugins = quota } auth default { mechanisms = plain passdb sql { args = /usr/local/etc/dovecot-sql.conf } userdb sql { args = /usr/local/etc/dovecot-sql.conf } user = root socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = mailnull group = mail } } } plugin { quota = maildir } ================================ --Chris

1 0

[Dovecot] mail archive
by T. Horsnell 09 Mar '07

09 Mar '07

I'd like to download a complete mail archive so that I can browse for problems concerning Mulberry. Is this possible, or can I only get them in monthly gulps? Cheers, Terry. --

5 7

[Dovecot] Bug: mbox-sync-parse.c: line 228
by Dean Quanne 09 Mar '07

09 Mar '07

[root@mail postfix]# dovecot --version 1.0.rc25 [root@mail postfix]# dovecot -n # /usr/local/etc/dovecot.conf ssl_cert_file: /usr/share/ssl/certs/dovecot.pem ssl_key_file: /usr/share/ssl/private/dovecot.pem login_dir: /usr/local/var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login mbox_write_locks: fcntl auth default: passdb: driver: pam userdb: driver: passwd Attempting to delete an email yields ... (from Thunderbird, Becky and Squirrel WebMail) Mar 5 23:58:30 localhost dovecot: imap-login: Login: user=<dean>, method=PLAIN, rip=192.168.0.81, lip=81.235.169.182, TLS Mar 5 23:58:30 localhost dovecot: IMAP(dean): file mbox-sync-parse.c: line 228 (parse_x_imap_base): assertion failed: (ctx->sync_ctx->next_uid > ctx->sync_ctx->prev_msg_uid) Mar 5 23:58:30 localhost dovecot: IMAP(dean): Raw backtrace: imap [0x80a8265] -> imap [0x80a7de7] -> imap [0x8070a04] -> imap [0x8070a17] -> imap(mbox_sync_parse_next_mail+0x200) [0x807101c] -> imap(mbox_sync_rewrite+0x94f) [0x8077813] -> imap [0x80724bc] -> imap(mbox_sync+0x3e2) [0x807447a] -> imap [0x806cd9a] -> imap(cmd_copy+0x23d) [0x8057599] -> imap(cmd_uid+0x76) [0x805a60a] -> imap [0x805afb6] -> imap [0x805af4a] -> imap(_client_input+0x78) [0x805b0fc] -> imap(io_loop_handler_run+0x131) [0x80ad9e1] -> imap(io_loop_run+0x21) [0x80acf79] -> imap(main+0x458) [0x8061fc4] -> /lib/tls/libc.so.6(__libc_start_main+0xd3) [0x467e23] -> imap [0x8056799] Mar 5 23:58:30 localhost dovecot: child 4221 (imap) killed with signal 6 -- Dean Quanne

3 3

[Dovecot] Dovecot vs Couir-IMAP
by Erdenebat Gantomor 09 Mar '07

09 Mar '07

I'm the beginner for IMAP/POP3 servers. I'm starting to use Dovecot. But I'm confusing between Courier-IMAP and Dovecot. Anyone tell me some quick tips regarding this issue. What's the better and what's the worst thing comparing these two IMAP/POP3 servers? I think the Dovecot is good enough for security and performance issue over Courier. Is it right? And how about the feature comparision? -- Best regards, Erdenebat Guntomor/ /mailto:RkLogin@gmail.com

9 11

[Dovecot] Dovecot's Sieve Support
by Robb Beal 09 Mar '07

09 Mar '07

Hi Folks, I'm looking for details of Dovecot's Sieve support. Specifically, Support for Sieve scripts (RFC 3028) and the protocol for remotely managing Sieve scripts, including: -- draft-martin-managesieve-06.txt -- draft-ietf-sieve-imapflags-05.txt And the following Sieve actions: -- fileinto -- redirect -- imapflags Thanks, Robb Beal -- www.laszlosystems.com --

2 1

[Dovecot] Dovecot Stable Version
by Erdenebat Gantomor 09 Mar '07

09 Mar '07

Dovecot is now in release candidate. When will release stable? Is it safe to use in production? I mean now the Dovecot is stable enough to use in production? -- Best regards, Erdenebat Guntomor/ /mailto:RkLogin@gmail.com

4 3

[Dovecot] global_script_path and virtual users
by Joan 09 Mar '07

09 Mar '07

We have a big installation with postfix + dovecot + sieve. Now we would like to create a "junk" folder in every customer inbox so they can discard the spam by they own. We are planning to user global_script_path = /etc/dovecot/dovecot.sieve Where /etc/dovecot/dovecot.sieve is: require "fileinto"; if exists "X-Spam-Flag" { fileinto "Junk"; } My question is, will the script find the users in our database? And how, will it be using the lda configuration? I have been for weeks looking for this in the wiki and couldn't find it anywhere. I promise I'll put it in there if I find the clue :)

2 1

Re: [Dovecot] Problems with different mail clients
by Nuno Miguel Neves 09 Mar '07

09 Mar '07

Hello, all. I thing I solved my problem... I just changed dovecot.conf to include the default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u which is disabled by default. Now, apparently, I can access my inbox from both my pocket and my Vista Mail. Than you all and hope this helps someone else. :) ----- Original Message ----- From: Nuno Miguel da Cruz Neves To: dovecot(a)dovecot.org Sent: Thursday, March 08, 2007 7:23 PM Subject: Problems with different mail clients I use dovecot as my imap server, and everything is ok. I used an IMAP client from Windows XP (Outlook Express) as well as Pocket PC (Windows Mobile 5) and webmail. The problem is that I recently used Windows Vista and its imap client (Windows Mail), and problems began. From the Windows XP machine, all is ok, but from the Pocket PC a weird thing happens: When I first configure the client, in the Received Items, it shows all items correctly, but then, when starting to donwload, they simply disappear. All other folders are OK. Problem is just in inbox. I thing (although my tests were not exaustive) that deleting the .imap folder solves the problem, but I just can't understand why, because it is recreated again... Any help? Thank you, ------------------------------------------------------------- Tel +351 21 3182720 | Fax +351 213146114 Email Nuno.Miguel.Neves(a)pkf.pt | www.pkf.pt PKF | Av. António Augusto de Aguiar, 108, 4º | 1050-019 Lisboa | Portugal

1 0

[Dovecot] "ldap_result() failed: Can't contact LDAP server" log messages
by Mike Brudenell 09 Mar '07

09 Mar '07

Greetings - I', continuing to build a test system that, at present, only I have access to. It is running Dovecot 1.0rc24. Here's the output of a "dovecot-n"... # /usr/local/etc/dovecot.conf log_path: /logfiles/mail/live/dovecot protocols: imap ssl_cert_file: /usr/local/etc/ssl/certs/imapservice-bundle.crt ssl_key_file: /usr/local/etc/ssl/private/imapservice-private.key disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login login_process_per_connection: no login_greeting_capability: yes mail_location: maildir:/mailstore/%1u/%u/Maildir:INDEX=/var/dovecot/ index/%1u/%u:CONTROL=/var/dovecot/control/%1u/%u mail_debug: yes mmap_disable: yes maildir_copy_with_hardlinks: yes mail_log_prefix: %Us(%u)[%p]: imap_client_workarounds: delay-newmail outlook-idle namespace: type: private separator: / inbox: yes auth default: mechanisms: plain login cache_size: 1024 cache_ttl: 600 username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890 username_format: %Lu passdb: driver: ldap args: /usr/local/etc/dovecot-ldap-passdb.conf userdb: driver: ldap args: /usr/local/etc/dovecot-ldap-userdb.conf We are using LDAP for the passdb and userdb. The oddity is that even on a quiescent system (Dovecot started from scratch, but no connections being made to it) we are seeing these messages being logged, apparently every 5 minutes: dovecot: Mar 09 11:09:44 Error: auth(default): LDAP: ldap_result() failed: Can't contact LDAP server dovecot: Mar 09 11:09:44 Error: auth(default): LDAP: ldap_result() failed: Can't contact LDAP server dovecot: Mar 09 11:14:45 Error: auth(default): LDAP: ldap_result() failed: Can't contact LDAP server dovecot: Mar 09 11:14:45 Error: auth(default): LDAP: ldap_result() failed: Can't contact LDAP server dovecot: Mar 09 11:19:45 Error: auth(default): LDAP: ldap_result() failed: Can't contact LDAP server dovecot: Mar 09 11:19:45 Error: auth(default): LDAP: ldap_result() failed: Can't contact LDAP server I'm guessing there are two log entries each time because of separate connections being used for the passdb and userdb. The LDAP server *is* available throughout. I'm wondering if Dovecot is trying to hold the connection open but, after a timeout of 5 minutes of inactivity, the LDAP server is closing it and causing Dovecot to log this message. If this is indeed the case then I guess on a production server these message will be rarely if ever seen. Obviously I'd prefer not to have such worrying-sounding log entries appearing. (And if my guess is right then they're slightly misleading: the LDAP server *can* be contacted!) Any thoughts? Cheers, Mike B-) -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

3 3

[Dovecot] deliver(redacted): Mar 08 10:13:03 Fatal: postmaster_address setting not given
by Larry Vaden 09 Mar '07

09 Mar '07

Hi, We're new to dovecot and like what we see so far, but Google doesn't seem to have much on this error message. What are the likely causes? Kind regards, Larry Vaden, CoFounder and CEO Internet Texoma, Inc. We Care About Your Connection The Market Leader In Texomaland Since 1995

3 2

Re: [Dovecot] 1.0rc26: ssl_verify_client=yes ?
by Apostolis Papagiannakis 09 Mar '07

09 Mar '07

> > Date: Thu, 08 Mar 2007 18:13:48 +0200 > From: Timo Sirainen <tss(a)iki.fi> > Subject: Re: [Dovecot] 1.0rc26: ssl_verify_client=yes ? > > On Thu, 2007-03-08 at 16:40 +0100, Steffen Kaiser wrote: > >> >> > On Thu, 8 Mar 2007, Timo Sirainen wrote: >> > >> >>>> > >> Q2) >>>> > >> The next step, if dovecot blocks the client because >>>> > >> of the verify_client_cert, how to create certs for OE, >>>> > >> Evolution and Thunderbird? >>>> >>> > > >>> > > I don't think most clients support SSL client certificates at all, >>> > > although I know some people are using them with some clients.. Maybe >>> > > someone could add a list of the clients supporting them into wiki. >>> >> > >> > Er, a dummy question, I guess: >> > Can you use client certs to login into Dovecot? >> > Aka can use the certs as "passdb"? >> > > Yes. It will still need some passdb, but you could use null password and > ssl_username_from_cert=yes settings in which case it doesn't matter what > user/password is used to log in. > > But it circumvents Dovecot's login/auth process security model, so I > don't recommend it that much. Maybe some day I'll make login process > forward the client cert to dovecot-auth which does the actual > verification. > I have successfully tested ssl_username_from_cert and found no real problem, apart from the fact that dovecot "username" takes the value of the certificate "CN" attribute , instead of the email attribute (in my case "Apostolos Papayanakis" instead of apap/ at /ccf.auth.gr). Everything else works as expected (eg, further userdb lookups based on certificate CN). Our University has issued a few thousand certificates with subjects such as "/C=GR/O=Aristotle University of Thessaloniki/OU=Network Operations Center/CN=Apostolos Papayanakis/emailAddress=apap/ at /ccf.auth.gr", that are used for administrative purposes. We would be very happy to use them as an alternative method of IMAP/POP3 authentication. However certificate CNs are not unique (e.g. "John Smith") and we would like to avoid constantly patching dovecot to use the email (or other) attribute from the certificate. I think replacing NID_commonName with NID_pkcs9_emailAddress ( or NID_subject_key_identifier, or NID_subject_alt_name) in login-common/ssl-proxy-openssl.c, line 527 would suffice. (X509_NAME_get_text_by_NID(X509_get_subject_name(x509), NID_commonName, buf, sizeof(buf)) < 0). Maybe I should post a complete patch if Timo is interested. Apostolis

3 2

[Dovecot] Seen this behavior before?
by hadmut＠danisch.de 09 Mar '07

09 Mar '07

Hi, it's not yet a bug report, just a question: After I was successfully using dovecot-imap and Thunderbird for quite a while without any problem (debian unstable), I now sometimes experience that the IMAP-connection hangs and thunderbird waits forever when accessing a folder. I did not yet analyze the problem and I am not sure whether it is a thunderbird or a dovecot problem. Did anyone see this behavior before? regards Hadmut

4 4

[Dovecot] any way to find last login time?
by Aleksey Perov 09 Mar '07

09 Mar '07

Hi, For some reason I need to regularly check which mailboxes are in use and which are not. For POP3, I use my patched version of popa3d which updates mtime on ~/Maildir/cur/ every time user logs in, and I always have a reliable way to find active and inactive mailboxes. Is there any way to find a last login time without parsing logs with dovecot? -- Aleksey

2 1

[Dovecot] Unable to authenticate system users in Dovecot 1.0rc25
by Malaney J. Hill 09 Mar '07

09 Mar '07

Hello, I recently installed dovecot1.0rc25 on my RHEL4 system running postfix and wish to use both virtual and system users. Virtuals work fine, but I get authentication failures with system users. I've tried pam, passwd and shadow. Attempting to telnet as system user telnet localhost 143 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. * OK Dovecot ready. a login user passwd a NO Authentication failed. and corresponding log Mar 3 14:35:24 obvx dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 resp=AG1o******************* Mar 3 14:35:27 obvx dovecot: auth(default): pam(myuser,127.0.0.1): pam_authenticate() failed: Authentication failure Mar 3 14:35:27 obvx dovecot: auth(default): passwd(myuser,127.0.0.1): password mismatch Mar 3 14:35:27 obvx dovecot: auth(default): client out: FAIL 1 user=myuser Below is the output of dovecot -n ============ # /etc/dovecot.conf protocols: imap pop3 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login first_valid_uid: 101 last_valid_uid: 101 mail_extra_groups: mail mail_location: maildir:~/Maildir mail_debug: yes maildir_copy_with_hardlinks: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): outlook-idle pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: user: nobody verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot/sql.conf passdb: driver: pam args: * passdb: driver: passwd userdb: driver: sql args: /etc/dovecot/sql.conf userdb: driver: passwd userdb: driver: prefetch socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: mail master: path: /var/run/dovecot/auth-master mode: 432 user: vmail group: mail plugin: quota: maildir:storage=10240:messages=1000 trash: /etc/dovecot/trash.conf ============= Thanks, Malaney

2 4

[Dovecot] Auth mechanism variable expansion?
by Bill Green 09 Mar '07

09 Mar '07

Hi all, Timo wrote in a message to the list in February that "%m variable expands to the auth mechanism name.". Indeed, the Wiki "Variables" page states that this is the case. However if I use %m in my SQL password query it does not get expanded. I'm using rc 25. What am I doing wrong?

2 1

[Dovecot] Message mixing after switchover from mbox to maildir
by Andrey Falko 09 Mar '07

09 Mar '07

Hi everyone, Here is the story. We are running Redhat Enterprise Linux 4, and were using Dovecot .99.x . At one point, we chose to switch from mbox to maildir (and still use Dovecot). After the switchover our users reported a bug when using Thunderbird: "A new behavior that I have observed a couple of times is that the new IMAP server confuses email headers with content. E.g., I have an email from Person X, but when I go to view it, the contents is just a spam body from an adjacent header. With this specific bug, adjacent spams are also running into other bodies. This occurs I'd say once every hundred messages. Other appearances of this bug are with adjacent messages concatenated. I'm not sure how to explain this, maybe what happens is that the new IMAP server confuses requests and delivers the wrong message bodies to the client, which get cached. This could in some circumstances be more than an annoyance, e.g., with confidential emails inadvertently getting picked up in replies to people outside the company." We proceeded to update Dovecot to the latest available version (1.0.0-rc25). However, despite that, our users still report the same bug: "This bug still persists. In particular, I just (after the new version was applied) clicked on an email from Person X, and Thunderbird displayed an email from Person Y that I had just replied to. Note that the email from Y was not adjacent to the one from X (at least, in the temporal ordering)." I have not been able to reproduce the bug myself. Can anyone think of where we should start debugging? Best regards, Andrey Falko

2 1

[Dovecot] Problems with different mail clients
by Nuno Miguel da Cruz Neves 08 Mar '07

08 Mar '07

I use dovecot as my imap server, and everything is ok. I used an IMAP client from Windows XP (Outlook Express) as well as Pocket PC (Windows Mobile 5) and webmail. The problem is that I recently used Windows Vista and its imap client (Windows Mail), and problems began. >From the Windows XP machine, all is ok, but from the Pocket PC a weird thing happens: When I first configure the client, in the Received Items, it shows all items correctly, but then, when starting to donwload, they simply disappear. All other folders are OK. Problem is just in inbox. I thing (although my tests were not exaustive) that deleting the .imap folder solves the problem, but I just can't understand why, because it is recreated again... Any help? Thank you, ------------------------------------------------------------- Tel +351 21 3182720 | Fax +351 213146114 Email Nuno.Miguel.Neves(a)pkf.pt | www.pkf.pt PKF | Av. António Augusto de Aguiar, 108, 4º | 1050-019 Lisboa | Portugal

2 1

[Dovecot] dovecot sasl auth (pam) + postfix doesn't work...
by marco ghidinelli 08 Mar '07

08 Mar '07

hello, i tried to use the "dovecot sasl" with postfix using pam as backend (actually pam_krb5) but it doesn't work. dovecot runs well as pop3 server authenticating with the pam_krb5 module with the config below, but it doesn't even connect with the kerberos server (a remote AD 2003) when it's called from postfix. --------dovecot.conf--------- protocols = pop3 pop3s imap imaps disable_plaintext_auth = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/var/mail/vhosts/turboden.net/%Ln/ mail_extra_groups = mail protocol imap { } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth_default_realm = MYCORP.LOCAL auth_verbose = yes auth_debug = yes auth default { mechanisms = plain login passdb pam { args = dovecot } userdb static { args = uid=5000 gid=5000 } user = root socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } dict { } plugin { } -------------------------------- -----/etc/pam.d/dovecot------ auth required pam_krb5.so no_ccache ignore_root debug account required pam_permit.so ----------------------------- from syslog i only get: Mar 8 10:52:38 muletto dovecot: auth(default): client in: AUTH^I1^Iplain^Iservice=smtp^Iresp=<hidden> Mar 8 10:52:38 muletto dovecot: auth(default): passdb(username(a)MYCORP.LOCAL,master): Attempted master login with no master passdbs Mar 8 10:52:39 muletto dovecot: auth(default): client out: FAIL^I1^Iuser=username(a)MYCORP.LOCAL note that it doesn't care about the content of the /etc/pam.d/dovecot when dovecot is called by postfix. does the dovecot-sasl authentication works with the pam backend? maybe i should rename (or copy) the /etc/pam.d/dovecot to another name? let me know. bye.

2 1

[Dovecot] Proposal: RSS-Feed
by hadmut＠danisch.de 08 Mar '07

08 Mar '07

Hi, dovecot provides POP and IMAP services. Proposal: Would be nice if it also could offer an RSS-Feed for a mailbox, giving a summery of sender/subject/date and maybe the first lines of text. regards Hadmut

3 4

[Dovecot] 1.0rc26: ssl_verify_client=yes ?
by Leroy van Logchem 08 Mar '07

08 Mar '07

Q1) I can't get ssl_verify_client_cert=yes working. The ssl key and cert are signed using our CA. Also the ssl_ca_file has a CRL appended (no revokes yet). Expected behavior: Stop the SSL (the client doesn't have a cert installed) Current behavior: Mail clients accepts SSL and login succeeds. (both Evolution and Thunderbird). My bad? Please advise. Q2) The next step, if dovecot blocks the client because of the verify_client_cert, how to create certs for OE, Evolution and Thunderbird? Thanks, Leroy Server type: Linux Red Hat ES 4.4 (32bit) # ./dovecot -n # /drbd/imap/dovecot-1.0.rc26/etc/dovecot.conf log_path: /drbd/imap/dovecot-1.0.rc26/var/dovecot.log protocols: imaps listen: a.b.c.39:143 ssl_listen: a.b.c.39:993 ssl_ca_file:/drbd/imap/dovecot-1.0.rc26/etc/certs/CA/cacert_with_crl.pem ssl_cert_file:/drbd/imap/dovecot-1.0.rc26/etc/certs/CA/imaps-signedcertificate.pem ssl_key_file:/drbd/imap/dovecot-1.0.rc26/etc/certs/CA/imaps-privatekey.pem ssl_verify_client_cert: yes verbose_ssl: yes login_dir: /drbd/imap/dovecot-1.0.rc26/var/run/dovecot/login login_executable: /drbd/imap/dovecot-1.0.rc26/libexec/dovecot/imap-login verbose_proctitle: yes mail_extra_groups: mail mail_location: mbox:~/:INBOX=/var/mail/%u mmap_disable: yes mbox_write_locks: fcntl dotlock imap_client_workarounds: delay-newmail outlook-idle auth default: mechanisms: plain login digest-md5 cram-md5 verbose: yes passdb: driver: passwd-file args: /drbd/imap/dovecot-1.0.rc26/etc/userdb_extra passdb: driver: pam userdb: driver: passwd-file args: /drbd/imap/dovecot-1.0.rc26/etc/userdb_extra userdb: driver: passwd Details (LONG) follow: # cat cacert_with_crl.pem -----BEGIN CERTIFICATE----- MIICxzCCAjCgAwIBAgIBADANBgkqhkiG9w0BAQQFADBSMRwwGgYDVQQKExNXTCBE ZWxmdCBIeWRyYXVsaWNzMQ4wDAYDVQQHEwVEZWxmdDEVMBMGA1UECBMMWnVpZCBI b2xsYW5kMQswCQYDVQQGEwJOTDAeFw0wNzAzMDgxMjE1MzhaFw0xNzAzMDUxMjE1 MzhaMFIxHDAaBgNVBAoTE1dMIERlbGZ0IEh5ZHJhdWxpY3MxDjAMBgNVBAcTBURl bGZ0MRUwEwYDVQQIEwxadWlkIEhvbGxhbmQxCzAJBgNVBAYTAk5MMIGfMA0GCSqG SIb3DQEBAQUAA4GNADCBiQKBgQCp4s55PxpcEgk1KhAJ3DA/DXKHBtUoAE3K273t 1nJzuAujA0mfVtpinDdpreHp53bVGSN5xIDZ+Ljy8wW7lPB5YSwBQFbIoFx/6NkI QPkYeVZ0NrFC1g2tZRD4ObRkqFuApr60+NokY+e3KuInnCdAf0Itb4VVolMvWccz vqdJBQIDAQABo4GsMIGpMAwGA1UdEwQFMAMBAf8wHQYDVR0OBBYEFPynIoyRPF2s UiGO+3RQr2pThXzQMHoGA1UdIwRzMHGAFPynIoyRPF2sUiGO+3RQr2pThXzQoVak VDBSMRwwGgYDVQQKExNXTCBEZWxmdCBIeWRyYXVsaWNzMQ4wDAYDVQQHEwVEZWxm dDEVMBMGA1UECBMMWnVpZCBIb2xsYW5kMQswCQYDVQQGEwJOTIIBADANBgkqhkiG 9w0BAQQFAAOBgQAtRPC7laBPuOMAein4ZXjxSia6l7XjpAI/A2bXFvbV1ulNzbno KYbeqfv6zp1SLWrKvwGeu4DrHLe098ATADqLWANqNqfI5t40nND1rsfGmjGTOJ7v /Q53AaTXEBn2D1ZIqGMUuFOXv0BFi1U2BmPyTt6hlZ1D7wTERxo0UGXFXw== -----END CERTIFICATE----- -----BEGIN X509 CRL----- MIIBFzCBgTANBgkqhkiG9w0BAQQFADBSMRwwGgYDVQQKExNXTCBEZWxmdCBIeWRy YXVsaWNzMQ4wDAYDVQQHEwVEZWxmdDEVMBMGA1UECBMMWnVpZCBIb2xsYW5kMQsw CQYDVQQGEwJOTBcNMDcwMzA4MTIyODE5WhcNMDcwNDA3MTIyODE5WjANBgkqhkiG 9w0BAQQFAAOBgQBnXWqvR9oS674EyNHYoOmv0KeFcVqLOUpR7bVGbMYvCsMc56yy E473NULD0EL0BZFMgGdN05e53KLnOoLiuvFuhCAxZW7o7f72lJC+wegFwROp7OOc aKJ5lumaZ86Xb0uM8N/yJ/5xxCubrt1TYGQYPTjoQo4rJccpFy8aeqNDrA== -----END X509 CRL----- ]# cat imaps-signedcertificate.pem -----BEGIN CERTIFICATE----- MIICHTCCAYYCAQEwDQYJKoZIhvcNAQEEBQAwUjEcMBoGA1UEChMTV0wgRGVsZnQg SHlkcmF1bGljczEOMAwGA1UEBxMFRGVsZnQxFTATBgNVBAgTDFp1aWQgSG9sbGFu ZDELMAkGA1UEBhMCTkwwHhcNMDcwMzA4MTIyMDA2WhcNMDgwMzA3MTIyMDA2WjBc MQswCQYDVQQGEwJOTDEVMBMGA1UECBMMWnVpZCBIb2xsYW5kMRwwGgYDVQQKExNX TCBEZWxmdCBIeWRyYXVsaWNzMRgwFgYDVQQDEw9pbWFwLndsZGVsZnQubmwwgZ8w DQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBALlEnCZu2o7LGp1x1rwBY2nZJH49L7by F8GVRpnoi7wnvXV11Iy7JUd0qbyBDWNn6EiBJ2YMemSmceVpXtyxI6wbBqmq0kgn 1VmglFUcYXRx6mkXuMx17OXpqSB9jNU22ldn20h/Xr1yhJ8W/RpohG9u6jebFiF3 qJXdyjXJqPSBAgMBAAEwDQYJKoZIhvcNAQEEBQADgYEAVwOhL3FICQeMJOSxil2S K1TiN+6zjrVDq7L7t7myOkWJA6hrZcPWQZfCV5ZoWaG8nREdesKAQBRvkT6uwmcJ 3pYpc/iBTtmwCpEVjfv0Ki9VwXpWuRo0FcQkrc8MVbclwnkGmtPAJAY7Dz7U/uBf w4N5cj1pfHltVEeD9Jb9tBo= -----END CERTIFICATE----- # cat imaps-privatekey.pem -----BEGIN RSA PRIVATE KEY----- <better not include this :)> -----END RSA PRIVATE KEY-----

3 4

[Dovecot] Different passwords for different IP-Addresses/protocols?
by hadmut＠danisch.de 08 Mar '07

08 Mar '07

Hi, I'd like to do the following: Have an IMAP server, avaible - at localhost 127.0.0.1 without SSL for local clients and web based applications such as squirrelmail - from outside with SSL for mobile users but - for security reasons - would like to use different passwords on both ports. How could I achieve that? regards Hadmut

2 1

[Dovecot] convert plugin
by FiL ＠ Kpoxa 07 Mar '07

07 Mar '07

Was about to try convert plugin (as opposed to mb2md.pl) and noticed, that it doesn't convert subfolders. I have following structure: ~/ | mail/ | Archive | Help | Sent | Done/ | Cardiology | Childrens | Orkin when I use convert-tool - #convert-tool username /home/username mbox:/home/username/mail/ maildir:/home/username/Maildir/ Error: Mailbox conversion: Couldn't create mailbox Done/Cardiology Error: Internal failure If I try "on the fly" conversion (by putting convert_mail = mbox:%h/mail & convert_skip_broken_mailboxes=yes in dovecot.conf) I get this in the log - Mar 6 12:23:33 enders2 dovecot: imap-login: Login: user=<username>, method=PLAIN, rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured Mar 6 12:23:43 enders2 dovecot: IMAP(username): Mailbox conversion: Couldn't create mailbox Done/Cardiology Both methods convert Archive and Logs mailboxes fine. Can anybody confirm? P.S. Linux enders2.tchlab.org 2.6.18-1.2200.fc5smp #1 SMP Sat Oct 14 17:15:35 EDT 2006 i686 i686 i386 GNU/Linux dovecot-1.0.rc22 (I know this is not the latest version, but I didn't see any changes to convert tool/plugin). FiL

2 4

[Dovecot] Config questionsabout various login parms
by Stewart Dean 07 Mar '07

07 Mar '07

I'm currently runing UW-IMAP (compiled vanilla) with procmail and mbox and am making my usual careful crawl (at turtle speed) through figuring out DC config. Some questions: a) I have something like 3-4 root imapd sessions so I presume that the default *login_processes_count* = 3 will be OK. I'm less clear about login_max_processes_count and login_max_connections = 256. A common enough heavy load has something like 275 unique users accessing imap and 600 imapd processes. Suggestions? I'm beginning with no SSL, KISS. b) If I set login_process_per_connection =no, would the number of users accessing imap be the same as the number of imapd sessions? c) login_process_size is confusing/intriguing. If there are 500 processes, the default of 32MB means 16GB (the box has 12GB). OTOH, what about the big players with a 400 MB inbox...will they be able to open their inbox with the default d) login_max_connections ditto...I shouldn't think that an individual user would conceivably have the default of 256, except pathologically....or is this applied to the listening imapd root processes. Thanks in advance for your help and patience......... -- ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

3 5

[Dovecot] Nokia 6680 and Dovecot
by Boris Ivanov 07 Mar '07

07 Mar '07

Hi Guys Im using Nokia 6680 to connect to dovecot (dovecot-1.0.b7_1 from FreeBSD ports) Where ever it trying to login it failed despite it works well with PC clients. * OK [CAPABILITY IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN] Dovecot ready. 1 CAPABILITY * CAPABILITY IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS AUTH=PLAIN AUTH=LOGIN 1 OK Capability completed. 2 LOGIN sj sj 2 NO Authentication failed. I relized that problem is 1 character message tag - 1,2. Is it bug in phone or in dovecot? -- Yours Boris

2 2

[Dovecot] Newbie questions: Load-balanced Dovecot with NFS storage
by Mike Brudenell 07 Mar '07

07 Mar '07

Hi, I experimented with Dovecot a while back and our site is now taking the plunge to switch to it from the UW IMAP server when we rejig the topology of our mail store and IMAP servers. Currently we have a farm of 5 IMAP servers running the UW server. Each has locally attached disk used to store people's mailboxes. Each user is allocated to one of these five servers and can only access their mail via that server. Our aim is to remove this restriction to provide resilience in the event of a server failing. Our thoughts... * We are envisaging having a farm of N (to be determined) servers running Dovecot. These will be closed systems: users do not have shell- access, and can only reach their mail via IMAP. * A single mailstore common to all N servers will be hosted on our NetApp filer and NFS-mounted on each server. Each server would be running Solaris 10. If we use all-new kit it will be x86-based, or we may have to redeploy some of our existing SPARC boxes to the new service. * We will be converting user mailboxes to be in Maildir format. * Our hardware load balancer, which supports persistent sessions, will be used to distribute users between the servers. This could either direct a user to any one of the N servers, or could be set to 'prefer' a given server for a particular user (only failing over to one of the others if their 'usual' server was unavailable). More on this in my questions below. :-) I have been scouring the Dovecot list, archives and Wiki and think I have come up with a set of issues we need to be aware of and things we have to do in order to make this work reliably. Please would you let me know if I have missed or misunderstood anything? Issues To Watch For ------------------- * For timestamp integrity our servers will be synched with NTP to our local time server. * Because sessions could be on different servers memory mapping of index files doesn't work well with NFS, so set mmap_disable=yes in dovecot.conf. * Dovecot relies on the mtime timestamp of mailbox files so the NFS-mounted mailstore needs to be mounted with these options on each server: actimeo=0 (Are there any other mount options we should use too?) * We will be using filesystem quotas on users mailboxes. We understand that Dovecot's index files are best on no-quota filestores so will store these separately. Questions --------- Q1. Would it be better to store the index files on NFS-shared filestore and direct users to any of the IMAP server machines? Or to store the index files on local disk and direct each user to their 'preferred' IMAP server machine? Q2. Does Dovecot (or "something") clean out old index files that haven't been accessed for a while? Eg, when a user has temporarily come through on a different IMAP server to normal. Or do the index files sit there untouched for evermore? Q3. Storing the index files on the NetApp filer would give us the ability to share them between servers and grow their volume as need be, but at the cost of performance. How big do the index files get? Are they typically a few kBytes per message? Per mailbox? Per user? Or more? Q4. We will be using Exim as the MTA, which can deliver direct to Maildir mailboxes. However I understand that Dovecot's "deliver" LDA adds the benefit of updating the index files as each message is delivered. Is this a significant gain? Or is there little difference in actual use? Q5. We have around 20,000 mail accounts and will therefore be seeing lots of concurrent IMAP sessions, usually secure (SSL) ones. I have seen mention that this can give rise to "Too many open files" errors under Solaris. How do we avoid this when we are likely to have several thousand concurrent IMAP sessions per server machine? With many thanks for your time and advice... Cheers, Mike Brudenell -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

5 9

[Dovecot] Time moving backwards error
by Emmett Pate 07 Mar '07

07 Mar '07

I'm running dovecot on an OpenBSD 3.7 server and after upgrading to RC25, the daemon started exiting with: Fatal: Time just moved backwards (1173221579 -> 1173221578)! This might cause a lot of problems, so I'll just kill myself now. After upgrading to RC26, I've gotten the error: Error: Time just moved backwards by 1 seconds. I'll sleep now until we're back in present. Occasionally, however, it's followed by: Fatal: Sleep interrupted, byebye. The server is running NTP, but I can't find any reason why it would have to roll the clock back a second so often. Until I get this figured out, I've gone back to RC19. Any ideas? Thanks. -- Emmett "Buddy" Pate Chief Technology Officer William E. Wood and Associates, Realtors epate(a)williamewood.com

3 2

[Dovecot] dovecot-ldap.conf - Active directory
by Cristian Salan 07 Mar '07

07 Mar '07

Hello, I have a configuration with dovecot-ldap working with openldap (on FreebSD 5.4 Release). Now I'm trying to do the same thing with an Active Directory (win2k3). I have installed an properly configured SFU. Via nss_ldap-pam_ldap is working fine (FreeBSD 6.2 Release). Because nss_ldap is reported broken with dovecot I'm trying to use dovecot-ldap for both passdb and userdb. My guessed filters/attributes follows: user_filter = (&(objectClass=user)(msSFU30Name=%u)) user_attrs = homeDirectory=msSFU30HomeDirectory, uidNumber=msSFU30UidNumber, gidNumber=msSFU30GidNumber pass_attrs = msSFU30Name,msSFU30Password pass_filter = (&(objectClass=user)(msSFU30Name=%u)) But it doesn't work. Any advice? Cristian Salan

2 1

[Dovecot] sporadic problem using ldap authentication
by Nuno Lopes 07 Mar '07

07 Mar '07

Hi, recently some users started complaining about sporadic authentication failures. When examining the logs I saw the following: Mar 7 03:20:24 gollum dovecot: auth(default): file auth-request.c: line 472 (auth_request_lookup_credentials_callback): assertion failed: (request->state == AUTH_REQUEST_STATE_PASSDB) Mar 7 03:20:24 gollum dovecot: auth(default): Raw backtrace: dovecot-auth [0x41d7fc] -> dovecot-auth [0x41da6c] -> dovecot-auth [0x40ddf3] -> dovecot-auth [0x416475] -> dovecot-auth [0x416825] -> dovecot-auth [0x41176d] -> dovecot-auth(io_loop_handler_run+0x13c) [0x420cec] -> dovecot-auth(io_loop_run+0x1c) [0x42005c] -> dovecot-auth(main+0x41e) [0x412ade] -> /lib64/tls/libc.so.6(__libc_start_main+0xea) [0x2a959fbaaa] -> dovecot-auth(ldap_msgfree+0x42) [0x4098da] Mar 7 03:20:24 gollum dovecot: child 10883 (auth) killed with signal 6 Mar 7 03:20:24 gollum dovecot: pop3-login: Can't connect to auth server at default: Resource temporarily unavailable Mar 7 03:20:24 gollum dovecot: auth(default): file auth-request.c: line 472 (auth_request_lookup_credentials_callback): assertion failed: (request->state == AUTH_REQUEST_STATE_PASSDB) Mar 7 03:20:24 gollum dovecot: auth(default): Raw backtrace: dovecot-auth [0x41d7fc] -> dovecot-auth [0x41da6c] -> dovecot-auth [0x40ddf3] -> dovecot-auth [0x416475] -> dovecot-auth [0x416825] -> dovecot-auth [0x41176d] -> dovecot-auth(io_loop_handler_run+0x13c) [0x420cec] -> dovecot-auth(io_loop_run+0x1c) [0x42005c] -> dovecot-auth(main+0x41e) [0x412ade] -> /lib64/tls/libc.so.6(__libc_start_main+0xea) [0x2a959fbaaa] -> dovecot-auth(ldap_msgfree+0x42) [0x4098da] Mar 7 03:20:24 gollum dovecot: child 10945 (auth) killed with signal 6 This output is from dovecot-1.0rc26 but this was first seen in 1.0rc7 and 1.0rc24 has similar results. I have seen no problem with the ldap server. I'm using similar setups in several other servers with no trouble at all. The main difference I see is that this machine is 64-bit and on a 2.6 linux kernel versus x86 on a 2.4. Thanks for any help you can provide. -- Nuno Lopes

2 1

[Dovecot] Question about auth-master, deliver, and SQL maps
by Richard Coleman 07 Mar '07

07 Mar '07

I have been running Postfix/Dovecot with a Postgresql backend for several months, and everything has been running great. Now I want to add server side filtering, so I'm attempting to configure deliver. The SQL maps for Postfix are all keyed upon the recipient email address. The SQL map (user_query) for Dovecot is keyed upon the IMAP login name, which is potentially unrelated to the email address. But when I configure deliver to use auth-master, it doesn't work right, because it is passing the recipient email address as a key to user_query, which is wrong. Somehow, I need auth-master to use a different SQL query from user_query when doing lookups for deliver. In essence, I want deliver to use the same SQL queries where were previously used for the Postfix "virtual" delivery agent. Is there any way to do this? Richard Coleman rcoleman(a)criticalmagic.com

2 1

[Dovecot] 1.0.rc25 released
by Timo Sirainen 07 Mar '07

07 Mar '07

http://dovecot.org/releases/dovecot-1.0.rc25.tar.gz http://dovecot.org/releases/dovecot-1.0.rc25.tar.gz.sig Instead of having "Should v1.0 be released already" discussion, how about having "What's still missing from wiki.dovecot.org and how could it be improved" discussion? And what should the wiki exported to doc/ directory in the tarball look like? * If time moves backwards, Dovecot kills itself instead of giving random problems. + Added --with-headers configure option to install .h files. Binary package builders could use this to create some dovecot-dev package to make compiling plugins easier. - PLAIN authentication: Don't crash dovecot-auth with invalid input. - IMAP APPEND: Don't crash if saving fails - IMAP LIST: If prefix.INBOX has children and we're listing under prefix.%, don't drop the prefix. - mbox: Broken X-UID headers still weren't handled correctly. - mail-log plugin: Fixed deleted/undeleted logging.

16 29

[Dovecot] maildirsize corruption
by Dean Manners 07 Mar '07

07 Mar '07

Using maildir++ with LDA and POP/IMAP we have been seeing intermittant maildirsize corruption. Where an operation will be prepended by a handful of ASCI null characters ^@^@. Eg: # cat maildirsize 5120000S -46895 -1 93359 1 60576 1 2858 1 49547 1 -206340 -4 94603 1 84785 1 54463 1 82486 1 97104 1 ^@^@^@^@^@^@^@^@40488 1 73397 1 83662 1 24668 1 42673 1 12081 1 -713606 -12 The instances of this that we have seen have all been deliver operations. Anyone else seen this ? Regards __________________________________________ Dean Manners

3 5

[Dovecot] auth problem with secure authentication (cram-md5)
by Adrian Stoica 07 Mar '07

07 Mar '07

I use dovecot 1.0rc25 in dovecot.conf: auth default { mechanisms = LOGIN CRAM-MD5 DIGEST-MD5 PLAIN APOP passdb sql { args=/etc/dovecot-crammd5.conf } passdb sql { args=/etc/dovecot-sql.conf } userdb sql { args=/etc/dovecot-sql.conf } } in dovecot-sql.conf: driver = mysql connect = host=/var/run/mysql/mysql.sock port= dbname=mail user=vmailuser password=vmailpassword password_query = SELECT clear AS password , user FROM mailbox WHERE user = '%n' AND IF('%d'='',clear = '%w',domain = '%d') AND status ='1' LIMIT 1 user_query = SELECT CONCAT(home,'/',maildir) AS home, '1001' AS uid, '1001' AS gid,CONCAT('maildir:storage=', quota * 1024 ) AS quota FROM mailbox WHERE (user = '%n' AND status = '1') OR (user = '%n' AND domain = '%d' AND status = '1') default_pass_scheme = CLEARTEXT in dovecot-crammd5.conf: driver = mysql connect = host=/var/run/mysql/mysql.sock port= dbname=mail user=vmailuser password=vmailpassword password_query = SELECT crypt AS password , user FROM mailbox WHERE user = '%n' AND status = '1' LIMIT 1 default_pass_scheme = CRAM-MD5 wen i "use secure authentication" and try login with thunderbird : dovecot: Mar 02 10:49:39 Info: Dovecot v1.0.rc25 starting up dovecot: Mar 02 10:49:40 Info: auth-worker(default): mysql: Connected to /var/run/mysql/mysql.sock (mail) dovecot: Mar 02 10:49:40 Info: auth-worker(default): mysql: Connected to /var/run/mysql/mysql.sock (mail) dovecot: Mar 02 10:49:47 Info: auth(default): client in: AUTH 1 CRAM-MD5 service=IMAP secured lip=192 .168.0.157 rip=192.168.0.64 dovecot: Mar 02 10:49:47 Info: auth(default): client out: CONT 1 PDY3MTAzMjE0OTY4NDA0MTguMTE3MjgzMjU4N0B0ZXN0Pg= = dovecot: Mar 02 10:49:47 Info: auth(default): client in: CONT 1 YWRpIGU4N2JjYTZiYzA5OTZkYjY0MDk5ZTZjZmQ2YjUxNWE 2 dovecot: Mar 02 10:49:47 Info: auth-worker(default): sql(adi,192.168.0.64): query: SELECT crypt AS password , user FROM mailbox WHERE user = 'adi' AND status = '1' LIMIT 1 dovecot: Mar 02 10:49:47 Info: auth(default): password(adi,192.168.0.64): Credentials: abd122fc9335009004012948209313d3 b31b6fdbc502bab773e90f7a195d341b dovecot: Mar 02 10:49:47 Info: auth(default): client out: OK 1 user=adi dovecot: Mar 02 10:49:47 Info: auth(default): master in: REQUEST 1 4319 1 dovecot: Mar 02 10:49:47 Info: auth-worker(default): sql(adi,192.168.0.64): SELECT CONCAT(home,'/',maildir) AS home, '1 001' AS uid, '1001' AS gid,CONCAT('maildir:storage=', quota * 1024 ) AS quota FROM mailbox WHERE (user = 'adi' AND stat us = '1') OR (user = 'adi' AND domain = '' AND status = '1') dovecot: Mar 02 10:49:47 Info: auth(default): master out: USER 1 adi home=/srv/vmail/adrian.eu/adi/ uid=100 1 gid=1001 quota=maildir:storage=512000 dovecot: Mar 02 10:49:47 Info: imap-login: Login: user=<adi>, method=CRAM-MD5, rip=192.168.0.64, lip=192.168.0.157, TLS dovecot: Mar 02 10:49:48 Info: auth(default): client in: AUTH 1 CRAM-MD5 service=IMAP secured lip=192 .168.0.157 rip=192.168.0.64 dovecot: Mar 02 10:49:48 Info: auth(default): client out: CONT 1 PDE0NjQxNTExNDY4MDE5MTQuMTE3MjgzMjU4OEB0ZXN0Pg= = dovecot: Mar 02 10:49:49 Info: auth(default): client in: CONT 1 YWRpIGI5YjliNmM3ZmMxMzUxMTU0Y2JiMGU2M2U4YmQxMzR k dovecot: Mar 02 10:49:49 Info: auth(default): password(adi,192.168.0.64): Credentials: abd122fc9335009004012948209313d3 b31b6fdbc502bab773e90f7a195d341b dovecot: Mar 02 10:49:49 Error: child 4311 (auth) killed with signal 11 restart thunderbird and try again to login: dovecot: Mar 02 10:55:16 Info: auth(default): client in: AUTH 1 CRAM-MD5 service=IMAP secured lip=192.168.0.157 rip=192.168.0.64 dovecot: Mar 02 10:55:16 Info: auth(default): client out: CONT 1 PDMwMTQ0NjI3Njc3MTYzODEuMTE3MjgzMjkxNkB0ZXN0Pg== dovecot: Mar 02 10:55:16 Info: auth(default): client in: CONT 1 YWRpIGMzYTRlODYwMTk1NjVkZDE1NDUzYzI5NGYxNWVhNjVm dovecot: Mar 02 10:55:16 Info: auth(default): password(adi,192.168.0.64): Credentials: abd122fc9335009004012948209313d3b31b6fdbc502bab773e90f7a195d341b dovecot: Mar 02 10:55:16 Error: child 4347 (auth) killed with signal 11 dovecot: Mar 02 10:55:18 Info: auth-worker(default): mysql: Connected to /var/run/mysql/mysql.sock (mail) dovecot: Mar 02 10:55:18 Info: auth-worker(default): mysql: Connected to /var/run/mysql/mysql.sock (mail) (In thunderbird : "Login to server failed.") After that the login works ok : dovecot: Mar 02 10:55:18 Info: auth-worker(default): mysql: Connected to /var/run/mysql/mysql.sock (mail) dovecot: Mar 02 10:55:18 Info: auth-worker(default): mysql: Connected to /var/run/mysql/mysql.sock (mail) dovecot: Mar 02 10:57:46 Info: imap-login: Aborted login: method=CRAM-MD5, rip=192.168.0.64, lip=192.168.0.157, TLS dovecot: Mar 02 10:57:53 Info: auth(default): client in: AUTH 1 CRAM-MD5 service=IMAP secured lip=192.168.0.157 rip=192.168.0.64 dovecot: Mar 02 10:57:53 Info: auth(default): client out: CONT 1 PDc2NzE5MTcwMzE4MzI1NzUuMTE3MjgzMzA3M0B0ZXN0Pg== dovecot: Mar 02 10:57:53 Info: auth(default): client in: CONT 1 YWRpIGIxOGQ3NmFmMGIwYmU3OTkyMjk4MmI1OWRlYTQzNTQz dovecot: Mar 02 10:57:53 Info: auth-worker(default): sql(adi,192.168.0.64): query: SELECT crypt AS password , user FROM mailbox WHERE user = 'adi' AND status = '1' LIMIT 1 dovecot: Mar 02 10:57:53 Info: auth(default): password(adi,192.168.0.64): Credentials: abd122fc9335009004012948209313d3b31b6fdbc502bab773e90f7a195d341b dovecot: Mar 02 10:57:53 Info: auth(default): client out: OK 1 user=adi dovecot: Mar 02 10:57:53 Info: auth(default): master in: REQUEST 6 4337 1 dovecot: Mar 02 10:57:53 Info: auth-worker(default): sql(adi,192.168.0.64): SELECT CONCAT(home,'/',maildir) AS home, '1001' AS uid, '1001' AS gid,CONCAT('maildir:storage=', quota * 1024 ) AS quota FROM mailbox WHERE (user = 'adi' AND status = '1') OR (user = 'adi' AND domain = '' AND status = '1') dovecot: Mar 02 10:57:53 Info: auth(default): master out: USER 6 adi home=/srv/vmail/adrian.eu/adi/ uid=1001 gid=1001quota=maildir:storage=512000 dovecot: Mar 02 10:57:53 Info: imap-login: Login: user=<adi>, method=CRAM-MD5, rip=192.168.0.64, lip=192.168.0.157, TLS Everytime i have to input password for 2-3 times to login with secure authentication.

2 2

[Dovecot] 1.0.rc24 released
by Timo Sirainen 07 Mar '07

07 Mar '07

And more fixes. * Dovecot now fails to load plugins that were compiled for different Dovecot version, unless version_ignore=yes is set. This needs to be explicitly set in plugins, so out-of-tree plugins won't have this check by default. - pop3_lock_session=yes could cause deadlocks, and with maildir the uidlist lock could have been overridden after 2 minutes causing problems - PAM wasted CPU by calling a timeout function 1000x too often - Trash plugin was more or less broken with multiple namespaces and with multiple trash mailboxes

19 36

[Dovecot] quota - dict permission denied
by Abu Gid 06 Mar '07

06 Mar '07

when I enabled quota plugin the following error occured : net_connect_unix(/usr/local/var/run/dovecot/dict-server) failed: Permission denied Any ideas? My config are as follows : .. dict { #quota = mysql:/etc/dovecot-dict-quota.conf quotadict = mysql:/usr/local/etc/dovecot-dict-quota.conf } .. quota = dict:storage=81920:messages=5000 proxy::quotadict /usr/local/etc/dovecot-dict-quota.conf: connect = host=xxxxx dbname=xxxxx user=xxxxx password=xxxxx table = quota select_field = current where_field = path username_field = username ----- I can connect to the database thru mysql prompt. dovecot version 1.0 rc5 -- azhar --

2 10

[Dovecot] Public kudos to Timo
by Troy Engel 06 Mar '07

06 Mar '07

I'm sitting here working away on various unrelated projects and watching patch after patch after patch flow in from Timo to fix all sorts of problems people are reporting. A coding madman on fire. Thanks Timo, you rock. I appreciate the time you spend on this software, I'm sure everyone else does as well. :) -te -- Troy Engel | Systems Engineer Fluid, Inc | http://www.fluid.com

4 3

[Dovecot] Some question about "auth default", "auth default_with_listener" and others
by Vitalij Satanivskij 06 Mar '07

06 Mar '07

Hello, Trying to set in dovecot.conf more than one auth section found that imap and pop3 auth process use bose of them. Loooks like thay do in round-robin way or maybe another way. Example of config: auth default { mechanisms = plain passdb sql { args = /usr/local/etc/dovecot-mysql.conf } userdb prefetch { } user = root socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = dovecot group = dovecot } } } auth smtp_auth { mechanisms = login plain passdb sql { args = /usr/local/etc/smtp_auth.conf } userdb prefetch { } socket listen { client { user = mailnull # User running Dovecot LDA group = mail # Or alternatively mode 0660 + LDA user in this group path = /var/run/auth-smtp-plain mode = 0660 } } } Main problem - dovecot-mysql.conf and smtp_auth.conf have doferent sql querys inside, and if user try to auth via pop3 service but thru the "auth smtp_auth", than it's failed in any way. Quetion - Is exist any way to limit default doecot auth process to use just "auth default" for authintification ? maybe some options like "services= POP3 IMAP" inside? Or maybe there is anather way to do this ?

2 1