- dovecot - dovecot.org

[Dovecot] "QUOTA" CAPABILITY keyword advertised incorrectly?
by Mike Brudenell 11 May '06

11 May '06

Greetings - I'm having a frustrating time with mail clients not picking up Dovecot's QUOTA extension to IMAP. The problem is that the QUOTA keyword isn't advertised in Dovecot's response to a CAPABILITY enquiry until *after* the user has authenticated. Unfortunately I've yet to find a mail client that issues a CAPABILITY request after authenticating. Instead all do so upon initial connection to the IMAP server (and, correctly, again after subsequently initiating a STARTTLS session but before authentication). Not re-querying the CAPABILITY after authentication is correct according to the IMAP spec in RFC2060, which says: 6.1.1. CAPABILITY Command Arguments: none Responses: REQUIRED untagged response: CAPABILITY Result: OK - capability completed BAD - command unknown or arguments invalid The CAPABILITY command requests a listing of capabilities that the server supports. The server MUST send a single untagged CAPABILITY response with "IMAP4rev1" as one of the listed capabilities before the (tagged) OK response. This listing of capabilities is not dependent upon connection state or user. It is therefore not necessary to issue a CAPABILITY command more than once in a connection. In particular the last two sentences are relevant. (At present Dovecot is only advertising availability of the QUOTA extension *after* authentication, and hence *is* dependent on the user.) Ths means that at present Dovecot's provision of the QUOTA extension isn't actually getting used by popular mail clients such as Thunderbird. Cheers, Mike Brudenell -- The Computing Service, University of York, Heslington, York Yo10 5DD, UK Tel:+44-1904-433811 FAX:+44-1904-433740 * Unsolicited commercial e-mail is NOT welcome at this e-mail address. *

3 3

[Dovecot] LDA not being called by postfix?
by Luca Corti 11 May '06

11 May '06

Hello, I'm using Postfix with virtual domains (MySQL), Dovecot 1.0beta7 and CVS LDA. I've set up postfix to use the LDA for maildir delivery and defined a global sieve script. -- master.cf -- ... dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/local/libexec/dovecot/deliver -d ${recipient} ... -- main.cf -- smtpd_banner = $myhostname ESMTP append_dot_mydomain = no relayhost = mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all program_directory = /usr/lib/postfix command_directory = /usr/sbin daemon_directory = /usr/lib/postfix mail_owner = postfix soft_bounce = yes message_size_limit = 15728640 biff = no myhostname = mail.example.com mydomain = example.com myorigin = /etc/mailname mynetworks = 127.0.0.0/8 1.2.3.8/29 192.168.0.0/24 mydestination = $myhostname localhost localhost.localdomain alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases local_recipient_maps = proxy:unix:passwd.byname $alias_maps local_transport = local virtual_mailbox_base = /var/vmail virtual_mailbox_domains = proxy:mysql:/etc/postfix/maps/mysql_virtual_domains_maps.cf virtual_mailbox_maps = mysql:/etc/postfix/maps/mysql_virtual_mailbox_maps.cf virtual_alias_maps = proxy:mysql:/etc/postfix/maps/mysql_virtual_alias_maps.cf proxy:mysql:/etc/postfix/maps/mysql_virtual_mailbox_maps.cf virtual_uid_maps = static:1234 virtual_gid_maps = static:1234 virtual_minimum_uid = 1001 dovecot_destination_recipient_limit = 1 virtual_transport = dovecot relay_domains = proxy:mysql:/etc/postfix/maps/mysql_relay_domains_maps.cf relay_transport = relay transport_maps = proxy:mysql:/etc/postfix/maps/mysql_transport_maps.cf relocated_maps = proxy:mysql:/etc/postfix/maps/mysql_virtual_relocated_maps.cf smtpd_helo_required = yes disable_vrfy_command = yes strict_rfc821_envelopes = yes smtpd_recipient_restrictions = reject_unknown_sender_domain, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, reject_rbl_client sbl.spamhaus.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client dul.dnsbl.sorbs.net smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_use_tls = yes smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key content_filter = smtp-amavis:[127.0.0.1]:10024 -- dovecot.conf -- protocols = imap imaps pop3 pop3s ssl_cert_file = /etc/postfix/smtpd.cert ssl_key_file = /etc/postfix/smtpd.key disable_plaintext_auth = no syslog_facility = mail login_greeting = Server ready. default_mail_env = maildir:/var/vmail/%d/%n/Maildir protocol lda { module_dir = /usr/local/lib/dovecot/lda postmaster_address = postmaster(a)example.com global_script_path = /var/vmail/sieve.script auth_socket_path = /var/run/dovecot-auth-master } protocol imap { login_executable = /usr/local/libexec/dovecot/imap-login mail_executable = /usr/local/libexec/dovecot/imap login_greeting_capability = yes imap_client_workarounds = outlook-idle delay-newmail } protocol pop3 { login_executable = /usr/local/libexec/dovecot/pop3-login mail_executable = /usr/local/libexec/dovecot/pop3 pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } auth_executable = /usr/local/libexec/dovecot/dovecot-auth auth_default_realm = example.com auth default { mechanisms = plain digest-md5 cram-md5 socket listen { master { path = /var/run/dovecot-auth-master mode = 0660 user = vmail group = vmail } } passdb sql { args = /usr/local/etc/dovecot-sql.conf } userdb static { args = uid=1234 gid=1234 home=/var/vmail/%d/%n/Maildir } } -- sieve.script -- require [ "fileinto" ]; if headers :contains "To" "luca(a)example.com" { fileinto "Spam"; } In my postfix logs I get May 11 00:59:50 ns1 postfix/virtual[9675]: 5E114847BC: to=<luca(a)example.com>, relay=virtual, delay=0, status=sent (delivered to maildir) and the message is there but no filtering is done and the sieve script is not compiled. -- Luca Corti PGP Key ID 1F38C091 Adesso dico: "Amore."

3 11

[Dovecot] Fix for the kevent "Unrecognized event" problem.
by Václav Haisman 11 May '06

11 May '06

The attached patch should fix the problem with dying imap on "Unrecognized event". The problem is that when we register a handle for IO_ERROR only, we still can get readable/writable event without EV_EOF being set. This case was not handled. -- Vaclav Haisman *** ioloop-kqueue.c.~1.4.~ Tue May 2 14:36:56 2006 --- ioloop-kqueue.c Tue May 9 21:29:33 2006 *************** *** 74,80 **** { struct ioloop_handler_context *ctx = ioloop->handler_context; const int fd = io->fd; ! struct kevent ev = { fd, 0, EV_ADD | EV_EOF, 0, 0, NULL }; enum io_condition condition = io->condition & MASK; i_assert(io->callback != NULL); --- 74,80 ---- { struct ioloop_handler_context *ctx = ioloop->handler_context; const int fd = io->fd; ! struct kevent ev = { fd, 0, EV_ADD, 0, 0, NULL }; enum io_condition condition = io->condition & MASK; i_assert(io->callback != NULL); *************** *** 184,190 **** i_assert(ctx->evbuf[i].ident < ctx->fds_size); if ((ctx->fds[ctx->evbuf[i].ident].mode & IO_ERROR) && ! (ctx->evbuf[i].flags & EV_EOF)) { struct io *errio = ctx->fds[ctx->evbuf[i].ident].errio; t_id = t_push(); --- 184,190 ---- i_assert(ctx->evbuf[i].ident < ctx->fds_size); if ((ctx->fds[ctx->evbuf[i].ident].mode & IO_ERROR) && ! (ctx->evbuf[i].flags & (EV_EOF | EV_ERROR))) { struct io *errio = ctx->fds[ctx->evbuf[i].ident].errio; t_id = t_push(); *************** *** 203,216 **** " in I/O handler %p", (void *)io->callback); } } else i_panic("Unrecognized event: kevent {.ident = %u," " .filter = 0x%04x," " .flags = 0x%04x," " .fflags = 0x%08x," ! " .data = 0x%08x}", ctx->evbuf[i].ident, ctx->evbuf[i].filter, ctx->evbuf[i].flags, ! ctx->evbuf[i].fflags, ctx->evbuf[i].data); } } --- 203,224 ---- " in I/O handler %p", (void *)io->callback); } + } else if (ctx->fds[ctx->evbuf[i].ident].mode & IO_ERROR) { + /* + NO-OP. If the handle is registered only for + IO_ERROR, then we can get readable/writable event + but no IO_READ | IO_WRITE set. + */ } else i_panic("Unrecognized event: kevent {.ident = %u," " .filter = 0x%04x," " .flags = 0x%04x," " .fflags = 0x%08x," ! " .data = 0x%08x}\n" ! "mode: 0x%x04x", ctx->evbuf[i].ident, ctx->evbuf[i].filter, ctx->evbuf[i].flags, ! ctx->evbuf[i].fflags, ctx->evbuf[i].data, ! ctx->fds[ctx->evbuf[i].ident].mode); } }

3 6

[Dovecot] IMAP threading - the THREAD command
by Jan Kundrát 11 May '06

11 May '06

Hi folks, there's an extension [1] to IMAP specifying the THREAD command to return list of message sequence numbers grouped to indicate the threading of them. That draft currently defines two algorithms, one of them based solely on Subjects (which is rather dumb) and the second one, combining Subjects with In-Reply-To (etc) headers. The second method is actually advertised and supported by Dovecot. However, I've got quite a lot of friends that lack the knowledge of what the "Subject" field is for, so they just leave it empty. The problem comes when I want Dovecot to return the threads - it follows the ietf draft, so it doesn't check only for references from message headers, but also the subjects. The result is that especially those mails with empty subjects are incorrectly grouped together. So, I'd like to see a feature that would eliminate this problem. It seems to me that there are currently two methods: a) Don't look at the Subject field at all - altough it might increase the speead a bit, it has some disadvantages as well, namely that you'll lose threading if someone uses broken mail client (but broken only in such a way that it preserves subjects) b) Ignore the Subject field if it is empty (after stripping stuff like "re:" etc - just as that draft specifies). Seems reasonable, IMHO. Of course we can't modify the result of a THREAD command (that would break the standard and it generally isn't a proper way to go), so we'd have to introduce another one. I'm pretty sure that especially method a) is very simple (and even simpler if I decided to break the standard by "fixing" the THREAD command), but I really don't like <rant>portable assembler :)</rant> <politely>C</politely>, so are there any chances for this "new and fixed" command to be included into Dovecot? I mean, I might do that in a flawed and ugly way just for me and post a patch so that possible interested persons can pick it, or I migth persuade someone to do it, actually :). Do you think that it's worth the issue? Does anyone have any experiences with talking to the IETF about possible extension of their draft? Ideas? [1] http://www.ietf.org/internet-drafts/draft-ietf-imapext-sort-17.txt Cheers, -jkt -- cd /local/pub && more beer > /dev/mouth

3 4

[Dovecot] Large folders and timeouts
by Fran Fabrizio 11 May '06

11 May '06

I have been having persistent issues with server timeouts on operations on large folders on our Dovecot install (1.0beta2 RPM that came with Fedora Core 5). Some observations from today... I have a Maildir folder with 38,000 messages (it is my Spam folder, naturally :-). In Thunderbird 1.5.0.2, if I click on that folder, it slowly but steadily downloads the headers and after 3-4 minutes, shows me the contents. So far, so good. If I then select all the messages and click Delete to delete them, that operation times out after about 1 minute. If I then click on my Trash folder after some number of minutes has passed, I see that those messages are now both in my Trash and in the original folder - I believe this is because Thunderbird first asks for a COPY over to Trash, and then asks for a STORE +FLAG \\Deleted on the copy that is still in the original folder. It appears that the COPY commands are working but the STORE commands are not since the connection is timing out before they run. I thought I'd try on another mail client, so I tried Squirrelmail. I set it to show 1000 messages per page. It does this just fine. Then I set it to 4,000 messages per page. Then I click on a folder with 12,000 messages, and I get this: ERROR: Connection dropped by IMAP server. Query: SORT (ARRIVAL) ISO-8859-1 ALL My questions are 1. what is the likely cause? and 2. will upgrading to a newer beta address any of this? I'd prefer to wait until FC5 has an updated RPM if possible. Our mail is stored on an NFS store. (I know NFS is slow and that this might be part of the cause.) However, it seems that the timeouts I am having are more related to times when there is no data flowing between the server and client. Note that the timeouts happened when the server was doing a COPY and when the server was doing a SORT but not when the client was downloading 38,000 headers. I'm just at a loss for what to look into next. I don't want to just say "NFS is slow" and live with it if this really has some other cause. :-) So, anyone have any thoughts as to other possible causes? Thunderbird has no option for setting the length of timeout from the client side, so there's nothing I can do from that end. Thanks, Fran -- Fran Fabrizio Senior Systems Analyst Department of Computer and Information Sciences University of Alabama at Birmingham http://www.cis.uab.edu/ 205.934.0653

4 4

[Dovecot] dovecot 1.0beta7 dying on me
by Dave Alden 11 May '06

11 May '06

Hi, Dovecot 1.0 beta7 is dying on me. My logfile shows: May 10 15:54:28 hermes dovecot: IMAP(alden): UIDs broken with partial sync in mbox file /var/mail/alden May 10 15:54:28 hermes dovecot: IMAP(alden): file mbox-sync-rewrite.c: line 106 (mbox_sync_headers_add_space): assertion failed: (start_pos < data_size) May 10 15:54:28 hermes dovecot: child 14185 (imap) killed with signal 6 I'm running this on a RHEL 3U7 system. I created a core file, but it doesn't look like it's too helpful (I've attached the gdb output to this message). I tried recompiling with "--enable-debug", but I got: /usr/lib/mysql/libmysqlclient.a(sha1.o)(.text+0x60): In function `sha1_result': : multiple definition of `sha1_result' ../lib/liblib.a(sha1.o)(.text+0x7f4):/scratch/dovecot-1.0.beta7/src/lib/sha1.c:233: first defined here /usr/bin/ld: Warning: size of symbol `sha1_result' changed from 158 in ../lib/liblib.a(sha1.o) to 126 in ../lib/liblib.a(sha1.o) collect2: ld returned 1 exit status Help? ...dave -- Dave Alden The Ohio State University Department of Mathematics

3 3

[Dovecot] Sieve-Editor
by Andreas Martin 11 May '06

11 May '06

Hi all. I'm looking for an editor for sieve-scripts. I tried the Squirrelmail plugin "avelsieve", but it requires "timsieved", wich Dovecot doesn't use. I don't want my users to write sieve-scripts on the console and server-side-filtering is absolutely required. I know that there are some frontends available, but I can't figure out, which one really works with libsieve and is usable for non-geeks... Do you have any suggestions? Thanks, Andreas

4 5

[Dovecot] pop3 problem with small messages with no Subject: and no To: headers
by Ken A 11 May '06

11 May '06

Hello, Seeing a strange thing with dovecot 1.0 b7 pop3. If a user gets a particular _very_ short spam message (not sure what virus makes these..), with NO Subject and NO To: headers and NO body, (example available upon request), the user is unable to download the mail. The log entry is: May 10 10:51:35 mail dovecot: POP3(user): Disconnected top=0/0, retr=1/1344, del=0/75, size=16383381 There's no QUIT, so no "Logged out" disconnect reason. I did a tcpdump to see what was happening. I have not been able to duplicate this myself yet, even with an exact copy of the message that seems to be causing it, so it could be a client issue, but I've never seen this before, and we just switched to Dovecot, so I thought I'd check with the list.. ideas? Message #9 is requested (it's the one in the user's box with missing headers). Dovecot begins returning it, but then disconnects, or so it seems. 10:51:35.171916 IP customer.60181 > mailserver.pop3: P 40:48(8) ack 1633 win 65535 0x0000: 4500 0030 d326 4000 7106 fc20 4624 16a1 E..0.&@.q...F$.. 0x0010: ceaa 0f11 eb15 006e 7ee7 2a93 d845 fe0c .......n~.*..E.. 0x0020: 5018 ffff 3618 0000 5245 5452 2039 0d0a P...6...RETR.9.. 10:51:35.172177 IP mailserver.pop3 > customer.60181: P 1633:2980(1347) ack 48 win 5840 0x0000: 4500 056b ca0b 4000 4006 3101 ceaa 0f11 E..k..@.@.1..... 0x0010: 4624 16a1 006e eb15 d845 fe0c 7ee7 2a9b F$...n...E..~.*. 0x0020: 5018 16d0 3fde 0000 2b4f 4b20 3133 3237 P...?...+OK.1327 0x0030: 206f 6374 6574 730d 0a52 6574 7572 6e2d .octets..Return- 0x0040: 5061 7468 3a20 3c68 7469 3935 6b67 6576 Path:.<hti95kgev 0x0050: 4072 @r 10:51:35.416549 IP mailserver.pop3 > customer.60181: P 1633:2980(1347) ack 48 win 5840 0x0000: 4500 056b ca0d 4000 4006 30ff ceaa 0f11 E..k..@.@.0..... 0x0010: 4624 16a1 006e eb15 d845 fe0c 7ee7 2a9b F$...n...E..~.*. 0x0020: 5018 16d0 3fde 0000 2b4f 4b20 3133 3237 P...?...+OK.1327 0x0030: 206f 6374 6574 730d 0a52 6574 7572 6e2d .octets..Return- 0x0040: 5061 7468 3a20 3c68 7469 3935 6b67 6576 Path:.<hti95kgev 0x0050: 4072 @r 10:51:35.470688 IP customer.60181 > mailserver.pop3: F 48:48(0) ack 2980 win 64188 0x0000: 4500 0028 d329 4000 7106 fc25 4624 16a1 E..(.)@.q..%F$.. 0x0010: ceaa 0f11 eb15 006e 7ee7 2a9b d846 034f .......n~.*..F.O 0x0020: 5011 fabc 09fa 0000 0000 0000 0000 P............. 10:51:35.470997 IP mailserver.pop3 > customer.60181: F 2980:2980(0) ack 49 win 5840 0x0000: 4500 0028 ca0f 4000 4006 3640 ceaa 0f11 E..(..@.@.6@.... 0x0010: 4624 16a1 006e eb15 d846 034f 7ee7 2a9c F$...n...F.O~.*. 0x0020: 5011 16d0 ede5 0000 P....... 10:51:35.515279 IP customer.60181 > mailserver.pop3: . ack 2981 win 64188 0x0000: 4500 0028 d32e 4000 7106 fc20 4624 16a1 E..(..@.q...F$.. 0x0010: ceaa 0f11 eb15 006e 7ee7 2a9c d846 0350 .......n~.*..F.P 0x0020: 5010 fabc 09f9 0000 0000 0000 0000 P............. That's all, the connection is closed. Ken A Pacific.Net

1 1

[Dovecot] Recommended FS for Dovecot Maildir
by Daniel Watts 10 May '06

10 May '06

Hi, I've heard that for Dovecot/Mailir systems there are filesystems that are optimised for the situation of many small files in one folder. Could I possibly have some feedback on what the recommended filesystems are? I've heard of ReiserFS but was wondering what other options there are and how they compare. If I get a good comprehensive response I'll build a wiki summary page out of the data gathered. Best wishes, Daniel

17 28

[Dovecot] Re: Recommended FS for Dovecot Maildir
by Roger Weeks 10 May '06

10 May '06

> Date: Wed, 10 May 2006 00:24:23 +0100 > From: Daniel Watts <d(a)nielwatts.com> > Subject: Re: [Dovecot] Recommended FS for Dovecot Maildir > To: Les Mikesell <lesmikesell(a)gmail.com> > > Can you remember any general findings? > > Thanks to all for responding in this thread - I am reading them all > and > making notes. All very useful information. > > Can I phrase the question in a different way? Of those of you who are > running 10,000+ user system - what FS do you use? > Or do you all use special file servers (netapps, emc etc?) with > proprietary filesystems? > > Daniel We're probably right at your 10000 user threshold, but we're an ISP so we get a LOT of mail traffic. Our mail system consists of dual exim servers processing incoming mail, writing to maildirs on a home- built NFS system. The home-built system is a dual-xeon machine with lots of SATA disks in a RAID5. We then have two client-facing machines running dovecot and squirrelmail. These are all SuperMicro servers running RedHat ES 4. They all use SATA disks. We are using EXT3 for the RAID5 filesystem, and I have had no performance issues to speak of. I had considered Reiser or xfs, but as I have limited experience with either filesystem I didn't feel comfortable using them in production. -- Roger J. Weeks Systems & Network Administrator Mendocino Community Network

1 0

[Dovecot] Debugging with strace
by Fran Fabrizio 10 May '06

10 May '06

We have a dovecot install that is working fine for everyone except one user, who complains that it takes a minute or longer to delete a single message from the INBOX to Trash. This is happening for him from multiple IMAP clients so it appears to be server-side. I wanted to start up a test instance of dovecot alongside the production one and test there. So I copied dovecot.conf, put imap on port 10143, and started up the test server like this: # strace -tt dovecot -F -c /etc/dovecottest.conf (I could not find the docs for -F but without it dovecot would quickly detatch into a daemon and I could no longer strace it... so is -F for putting dovecot in the foreground like I think? :-) I noticed two things when I did this: 1. My screen just scrolled continuously with poll calls - does dovecot poll something every second even when it has no clients connected? 2. It appeared to interfere with the production install running alongside of it - as I could no longer authenticate to it or copy messages to my Sent folder when I sent something out through the production dovecot. I had to restart the production instance to get it to behave. So my questions are whether all that polling output is normal and also, is my testing method really interfering with the production server, and if so, how to avoid that? Thanks, Fran -- Fran Fabrizio Senior Systems Analyst Department of Computer and Information Sciences University of Alabama at Birmingham http://www.cis.uab.edu/ 205.934.0653

2 2

[Dovecot] moving from postfix+dovecot to postfix+dovecot+postfixadmin+mysql
by albi 10 May '06

10 May '06

hi, i know this is not really a dovecot-question, but (after searching for hours and hours) here goes : last week i've tested a setup with postfixadmin and dovecot, and i'm very happy with the result! it's running on a FreeBSD-server but i've used this howto (which describes the setup for debian) : http://bliki.rimuhosting.com/space/knowledgebase/linux/mail/postfixadmin+on… big question is : how can i convert the already existing passwords from the mail-users to the mysql-based auth in postfixadmin/dovecot ------------------------------------------ thanks for having dovecot available, it's great to work with ! :) -- grtjs, albi gpg-key: lynx -dump http://scii.nl/~albi/gpg.asc | gpg --import

1 0

[Dovecot] managesieve daemon
by Gerald Dachs 10 May '06

10 May '06

Hi, I am currently working on a managesieve daemon, so that I can use the squirrelmail plugin avelsieve together with dovecot-lda. Without this I can't migrate from cyrus to dovecot. For several reasons I don't use the timsieved from cyrus and build it from scratch. Is this interesting for somebody else? Gerald

9 11

[Dovecot] Imap folders missing after updating
by Fred Harris 10 May '06

10 May '06

I just updated from 0.99.14 to 1.0beta2 on FC5 and my my IMAP folders have mainly disappeared in my Thunderbird client. All that's left is Inbox and Trash. Is there some configuration setting that's now necessary to make the server think an account uses IMAP folders? The way it seemed to work before was that the presense of a Maildir directory in a user's home indicated IMAP. The new server seems to read the Maildir directory but it doesn't recognize all the folders. Thanks. --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

14 39

[Dovecot] SIEVE: Any information at all?
by Leah Cunningham 09 May '06

09 May '06

Hi, I am quickly losing the will to live over the lack of any kind of information at all about the SIEVE support that is listed in the dovecot features list. Does anyone have any information at all? I've grepped through the source, looked through all the configuration files, and googled a fair bit and come up with nothing at all. How would a user with maildir enable a sieve script? Does it run on port 2000? How can I test functionality? Thanks, Leah

5 7

[Dovecot] auth: pam_setcred() failed: Error in service module
by Martin Stockinger 09 May '06

09 May '06

Hi, I have a strange problem with authentication. Some users can successfully authenticate and some users can not authenticate. All users use the same client (thunderbird-1.5.0.2-win32-de). At the problematic users i get the following error message: ============ snip =================== auth(default): client in: AUTH 8 PLAIN service=IMAP secured lip=10.24.1.6 rip=10.211.11.1 auth(default): client out: CONT 8 auth(default): client in: CONT<hidden> auth(default): pam(pgerlesb,10.211.11.1): pam_setcred() failed: Error in service module auth(default): client out: FAIL 8 user=pgerlesb auth(default): client in: AUTH 9 PLAIN service=IMAP secured lip=10.24.1.6 rip=10.211.11.1 resp=<hidden> auth(default): pam(pgerlesb,10.211.11.1): pam_setcred() failed: Error in service module auth(default): client out: FAIL 9 user=pgerlesb imap-login: Aborted login: user=<pgerlesb>, method=PLAIN, rip=10.211.11.1, lip=10.24.1.6, TLS ============ snap =================== The username and password is right. I can "su - <username>" at the dovecot host with the same password. Some other users can authenticate without any problems. I have set in dovecot.conf: auth default { mechanisms = plain passdb pam { args = "*" } userdb passwd { } } I have configured PAM to do the authentication against Kerberos5. The user data come from an LDAP directory. What could be the problem? Thanks Martin Stockinger

1 0

[Dovecot] Encrypted IMAP only from Internet, unencrypted POP3 from internal network
by Rainer Frey 09 May '06

09 May '06

Hi, we have following situation: I migrated our company mailserver from POP3 only to dovecot with IMAP and POP. We need to have unencrypted POP3 from our internal network, and the subnet our mailserver is in. Additionally, we now want to allow encrypted IMAP from the internet (for some defined accounts), preferably with TLS (which means I open Port 143 in our firewall). Now, how can I achieve that they can't use unencrypted plaintext authentication from Internet, while I allow unencrypted POP3 from the mailserver and private network? (I can require using encryption for IMAP from our internal net, but I must have unencrypted POP3 as we use software that retrieves mail via POP3 that doesn't support encryption). My idea was: - use disable_plaintext_auth for IMAP only - use disable_plaintext_auth for internet, but not our networks - allow connection from the internet only for certain accounts, and limit them to use encryption Internet access for POP3 is not necessary. Is any of this possible with dovecot? Or another way to achieve my goal? Non-plaintext authentication is not possible, as we use linux system accounts with shadow passwords. TIA Rainer Frey -- Software Development ------------------------------------------------------ Inxmail GmbH

8 11

Re: [Dovecot] Imap folders missing after updating
by Mark E. Mallett 09 May '06

09 May '06

> LOL, there are only about a billion web pages that are "2 clicks" from > the front page of any site. True if you are just wandering around willy-nilly. It's not like it's tacked up on a pole on Alpha Centauri. I was opining that "Documentation" -> "Upgrading" is pretty easy to find, and not at all in line with "undocumented configuration changes." Come to think of it, it's only one click away from where the README tells you to look. But you do have to look, and care to look. Me, I was grateful that it was there; it didn't have to be. > This is why people still stay in the MS heard. Any number of problems > like this would cost most companies thousands of dollars to resolve. > It's much cheaper just to pay a company like MS who take upgrade > transitions seriously. Not gonna touch that. And true transition starts from within :) People won't bite too hard if you ask, either. Nip, maybe. mm (who obviously should be working)

1 0

[Dovecot] ssl-build-param
by Jackie Hunt 08 May '06

08 May '06

Hi all, I'm trying to get dovecot up and running on an AIX 5.2 system with openssl 0.9.8a. Everything compiles fine, but when I start dovecot I find in the log: dovecot: May 08 13:39:14 Info: Dovecot v1.0.beta7 starting up dovecot: May 08 13:39:14 Info: Generating Diffie-Hellman parameters for the first time. This may take a while.. dovecot: May 08 13:39:14 Error: ssl-build-param: Trying to allocate 0 bytes dovecot: May 08 13:39:14 Error: child 18998 (ssl-build-param) killed with signal 6 I searched the archives of the mailing list and didn't have any luck. Any help would be created appreciated. Please reply directly to me as well as the list. Thanks much! Jackie --- Jackie Hunt ACNS Voice: (970) 663-3789 Colorado State University FAX: (970) 491-1958 Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu

1 0

[Dovecot] Unrecognized event: kevent
by Dillon 08 May '06

08 May '06

Hey guys, I just subscribed to the list about 15 minutes ago so i apologize in advance if this is something that has already been discussed. I skimmed through the web archives and I didn't see anything. I'm running FreeBSD/amd64 and after upgrading from 1.0b3 to 1.0b7 I am experiencing the following May 8 13:18:22 loveturtle dovecot: imap-login: Login: user=<turtle>, method=plain, rip=216.89.228.116, lip=216.91.90.11, TLS May 8 13:18:22 loveturtle dovecot: IMAP(turtle): Unrecognized event: kevent {.ident = 2, .filter = 0xfffffffe, .flags = 0x0000, .fflags = 0x00000000, .data = 0x00004000} May 8 13:18:22 loveturtle dovecot: child 32279 (imap) killed with signal 6 Immediately after this imap respawns and then prints this again and crashes. it happens about three or four times a second until i shut down dovecot. I reverted back to 1.0b3 and everything is happy again. Cheers, Dillon

3 3

[Dovecot] kevent error (1.0.b7) - Is this a FreeBSD-only problem?
by Odhiambo WASHINGTON 08 May '06

08 May '06

Hello everyone, The problem below has been reported, but I did not see any response! <cut> | | I'm also seeing this bug while testing the forthcoming 1.0.b7 FreeBSD | | port under 6.1-PRERELEASE: | | | | Info: imap-login: Login: user=<wibble>, method=PLAIN, rip=10.0.0.2, | | lip=10.0.0.2, TLS | | dovecot: Error: IMAP(isometry): Unrecognized event: kevent {.ident = | | 2, .filter = 0xfffffffe, .flags = 0x0001, .fflags = 0x00000000, .data | | = 0x00004000} | | dovecot: Error: child 7254 (imap) killed with signal 6 </cut> So, I am wondering if this a problem applying only to FreeBSD. When I downgrade to beta5, this problem is not there at all!! -Wash http://www.netmeister.org/news/learn2quote.html DISCLAIMER: See http://www.wananchi.com/bms/terms.php -- +======================================================================+ |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +======================================================================+ On-line, adj.: The idea that a human being should always be accessible to a computer.

2 1

[Dovecot] Problem with "INDEX" in default_mail_env, and pop3
by Andrea Dell'Amico 08 May '06

08 May '06

Hello all, I've a problem with maildir, pop3 and relocated indexes. My configuration is: default_mail_env = maildir:%h/Maildir:INDEX=/var/dovecot/index/% u:CONTROL=/var/dovecot/control/%u I created the "/var/dovecot/{index,control}/%u" directories, each one have rights 700 and the ownership is assigned to the user. When the pop clients connect, they fail with the error dovecot: POP3(<username>): mkdir(/var/dovecot/index/<username>/.INBOX) failed: Permission denied I'm using dovecot 1.0.beta7, authentication is pam. I'm using the following settings, too: valid_chroot_dirs = /home:/var/spool/mail:/var/dovecot/index:/var/dovecot/control (last two directories added when i changed the "default_mail_env" setting). Does anybody know what I'm doing wrong? I need to move indexes in a file system without quota. Thanks in advance, andrea -- "Thinking meat! You're asking me to believe in thinking meat!" - Terry Bisson <http://www.terrybisson.com/meat.html>

1 0

[Dovecot] Maildir folder hierarchy question
by Richard Leszczynski 08 May '06

08 May '06

Hello all, I am trying to set up Dovecot to use a particular maildir folder hierarchy and have a problem that relates to the inbox. the folder hierarchy I want in /.../Maildir/ is: .inbox cur new tmp .imap.index.files-for-inbox .sent-items cur new tmp .imap.index.files-for-sent-items however the hierarchy that dovecot gives me is .inbox (unused) .INBOX .imap.index.files-for-.INBOX cur new tmp .sent-items cur new tmp .imap.index.files-for-.sent-items I would like to have the (cur,new,tmp) folders associated with the the .inbox placed in the .inbox directory, not alongside it in the main maildir directory. Dovecot appears to do this automatically for other folders. I'm not too bothered if the .inbox folder has to be capitalised. Is this possible? I suspect from reading the Dovecot Q&A that it may not be as the rootdir has special significance with IMAP but I would like confirmation. I've currently set my default_mail_env as: default_mail_env = maildir:/home/%u/mail/maildir:INBOX=/home/%u/mail/maildir/.inbox which I thought should do accomplish what I want but it has no apparent effect. I'm running SUSE 10.0 with Dovecot 0.99.14-5 (as installed by Yast). KMail and Outlook are being used to access Dovecot. Can anyone help? thank you, Richard L ___________________________________________________________ 24 FIFA World Cup tickets to be won with Yahoo! Mail http://uk.mail.yahoo.com

3 2

[Dovecot] CVS forked into development/stable branches
by Timo Sirainen 08 May '06

08 May '06

New branch created to CVS: branch_1_0 It's going to stabilize into v1.0 Dovecot, hopefully somewhat soon. I'll start adding new larger features into HEAD, so you might want to switch to branch_1_0 if you're currently using Dovecot from CVS. You can do this with: cvs up -r branch_1_0 The nightly snapshots are from branch_1_0, at least for now.

1 0

[Dovecot] different login_greeting for pop3 & imap?
by Geert Hendrickx 08 May '06

08 May '06

Hi, I have a tiny feature request for Dovecot: could it optionally have different login_greetings for pop3 and imap connections? e.g. I want it to say "Dovecot on pop.mycompany.com ready" on pop3 connections and "Dovecot on imap.mycompany.com ready" on imap connections. Would that be possible? TIA, Geert

3 5

[Dovecot] configuring dovecot-lda takes forever...
by Joseba Torre 08 May '06

08 May '06

Hi, I want to try dovecot-lda, but the ./configure doesn't seem to finish... I've followed the installation instructions: cvs -d :pserver:anonymous@dovecot.org:/home/cvs co dovecot-lda cd dovecot-lda/ ./autogen.sh ./configure --with-dovecot=../dovecot (dovecot source tree -from cvs- is in ../dovecot) Everything seems to go ok but the message config.status: creating Makefile never ends. The problem seems to be in this process: sed -f ./confstatn25334/subs-3.sed (i can attach the file if needed). Any hint? Aaaaaaaaaaagur.

3 3

[Dovecot] dovecot error: unrecognized event
by dovecot＠bengrimm.net 07 May '06

07 May '06

If you're using the FreeBSD port: Go to /usr/ports/mail/dovecot Edit Makefile Find the line: .if !defined(WITHOUT_KQUEUE) Change it into: .if defined(WITH_KQUEUE) Then: make deinstall && make install Worked for me.

1 0

[Dovecot] Dovecot EOF bug on FreeBSD 6.0
by Matt Bostock 06 May '06

06 May '06

Hello, We're running Dovecot 1.0.7 on FreeBSD 6.0. Now and then I'll see a POP error ('EOF'), which is remedied simply by restarting Dovecot. Is this a known issue? Kind regards, Matt

1 0

[Dovecot] rebuilding dovecot 1.0 beta7 at.src.rpm mysql error
by dave 06 May '06

06 May '06

hi all i'm trying to rebuild the 1.0 beta 7 src rpm from atrpms.net to use mysql 5, instead of mysql 4 but i'm having issues when it gets to the mysql part of the make i have mysql 5 installed (via mysql.com rpm's) i changed the spec file where it says Buildrequires to say MySQL-devel (instead of mysql-devel) but it always comes back with this error, and i don't know what it means, i also tried leaving it as mysql-devel, but still get the same error when i run rpmbuild -ba dovecot.spec && rpm -Uvh --force ../RPMS/i386/dovecot* am i doing this completely wrong, is there something else i need to do to be able to use mysql 5? /usr/lib/mysql/libmysqlclient.a(sha1.o)(.text+0x60): In function `sha1_result': : multiple definition of `sha1_result' ../lib/liblib.a(sha1.o)(.text+0x8e7):/usr/src/redhat/BUILD/dovecot-1.0.beta7/src/lib/sha1.c:233: first defined here /usr/bin/ld: Warning: size of symbol `sha1_result' changed from 191 in ../lib/liblib.a(sha1.o) to 126 in /usr/lib/mysql/libmysqlclient.a(sha1.o) collect2: ld returned 1 exit status make[3]: *** [dovecot-auth] Error 1 make[3]: Leaving directory `/usr/src/redhat/BUILD/dovecot-1.0.beta7/src/auth' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/usr/src/redhat/BUILD/dovecot-1.0.beta7/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/usr/src/redhat/BUILD/dovecot-1.0.beta7' make: *** [all] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.84952 (%build) thanks dave -- http://dtracorp.com

1 0

[Dovecot] Sending email over IMAP?
by Marc Perkel 06 May '06

06 May '06

I'm advocating for a change in the IMAP specification to allow outgoing email to be sent over the same connection as incoming rather that having to separately configure outgoing SMTP email. There are two significant advantages to this concept. 1) It would greatly simplify setup for clients as they would only have to configure one connection rather than two. 2) Spam reduction by authentication. The sending of email over the same connection tells the server that the person who is the sender of the email also has demonstrated they have access to read the account. This would be a powerful whitelisting criteria for eliminating fake senders. So - my question. It seems that it would be easy to do this if there were a standard. Dovecot would merely hand incoming email off to the outgoing SMTP server. Besides the difficulty of getting a standard created, am I right on my assumptions?

11 26

[Dovecot] UID and GID problems
by Simon Windsor 06 May '06

06 May '06

Hi I have been using dovecot for a while now to support a number of virtual users via a postgres table. The dovecot user chown is dovecot:dovecot, and for each domain, I use a single GID, so for example domain1 is 1001:dovecot, domain2 is 2001:dovecot. All directories are owned by 1001:dovecot or 2001:dovecot. The works well most of the time, but occasionally, some user files are owned by dovecot:dovecot, and others by gid:dovecot. Is this a know issue? Any help would be appreciated. Simon -- Simon Windsor Eml: simon.windsor(a)cornfield.org.uk Tel: 01454 617689 Mob: 07960 321599

1 0

[Dovecot] dovecot LDA w/virtual domains and postfix
by Leah Cunningham 05 May '06

05 May '06

Hi, I've been trying to follow the documentation that I am finding, but am running into trouble getting things set up correctly for postfix + virtual domains (using ldap) with dovecot LDA. I can get it to work without LDA, but I'm running into permissions problems when I try to run with LDA. I am wondering if anyone has any good examples of configuring this. I basically have a 'vmail' user (1015) that owns a /var/vmail/domains directory tree. I have set the following in postfix master.cf: # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/lib/dovecot/deliver -d ${recipient} In main.cf dovecot_destination_recipient_limit = 1 virtual_transport = dovecot virtual_mailbox_base = /var/vmail/domains virtual_mailbox_maps = ldap:/etc/postfix/ldap-mailbox.cf virtual_mailbox_domains = ldap:/etc/postfix/ldap-vdoms.cf virtual_uid_maps = static:1015 virtual_gid_maps = static:12 home_mailbox = Maildir/ and in dovecot.conf: protocols = imap imaps pop3 pop3s ssl_disable = no ssl_cert_file = /etc/ssl/certs/sauerkraut.heinous.org.crt ssl_key_file = /etc/ssl/private/sauerkraut.heinous.org.key mail_extra_groups = mail valid_chroot_dirs = /var/vmail/domains default_mail_env = maildir:/var/vmail/domains/%d/%n/mail protocol lda { postmaster_address = postmaster(a)frauerpower.com } protocol imap { } protocol pop3 { } auth default { mechanisms = plain passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } user = root } auth default_with_listener { mechanisms = plain userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } socket listen { master { path = /var/run/dovecot-auth-master mode = 0600 user = vmail group = mail } } } plugin { } However, I must be missing something. I get the following when trying to send the user a message: setuid(1015) failed: Operation not permitted Doing 'postmap -q leah(a)frauerpower.com ldap:/etc/postfix/ldap-mailbox.cf' returns 'frauerpower.com/leah/mail/' which, in the non LDA mode worked okay, plonking the mail under /var/vmail/domains/frauerpower.com/leah/mail How is this sort of thing normally set up? Apologies in advance for my ignorance, I am pretty new to dovecot. Leah

2 5

Saving Direct to Shared Mailbox (Was: Re: [Dovecot] Sending email over IMAP?)
by Timothy White 05 May '06

05 May '06

Thinking along similar lines to this sending email via IMAP... What I am thinking, is using Shared Folders/Mailbox's, like mailing lists. We have the power of ACL's, and if you have the appropriate permissions, you can 'append' emails to the folder. Except, when you think of a mailing list, you usually just hit reply. One of the projects I am working on, will be setup with a number of shared folders, an 'official' folder that everyone has read access to, (probably thier own index files as well, so the Seen flag isn't global), and a few admins have write access to. The problem still comes, as to the easiest way to 'send emails' to the folder. I could set up a virtual user, that delivers to that folder, but then you need a second system of ACL's that determine who can send emails to the folder.... Unless, Dovecot LDA handles that.... So, other than lack of client support for saving directly to a folder, instead of sending to a folder... Can Dovecot LDA do what I want, or be made to do what I want? I have no problems having a 'virtual' user that people send the emails to, as long as Dovecot LDA will handle the ACL's for it as well. Any ideas of how to solve this problem, or if Dovecot LDA can/will do it? Tim -- Linux Counter user #273956

6 7

[Dovecot] Bug in yesterday's CVS..
by Apps Lists 05 May '06

05 May '06

Hi Timo. I'm doing some testing with yesterday's CVS code and believe I've found a bug. In SquirrelMail, I get 5 messages in INBOX (doesn't matter how). I click "Toggle All" then "Delete". All 5 messages move to Trash. The Trash folder gets a link "expunge". I click that and get the following error: ERROR : Bad or malformed request. Query:STORE 1:6 +FLAGS (\Deleted) Server responded: Error in IMAP command STORE: Invalid messageset There are 5 messages in Trash, not 6. After this error is displayed, I see the following in syslog: May 2 09:37:24 dev3 dovecot: IMAP(jtest): Fixed index file /var/mailstore/72/af/375887/Maildir/.Trash/dovecot.index: first_recent_uid_lowwater 10 -> 9 (this might not actually be the right message for the error, but it's always first_recent_uid_lowwater getting decremented by 1) If I hit refresh in the browser, I can then click Expunge without issue once first_recent_uid_lowwater is fixed. I am able to replicate this easily in NFS, GFS (cluster) and local disk. Steve

2 3

[Dovecot] dovecot LDA w/virtual domains and postfix
by Leah Cunningham 05 May '06

05 May '06

Hi, I am running into trouble getting things set up correctly for postfix + virtual domains (using ldap) with dovecot LDA. I can get it to work without LDA, but I'm running into permissions problems when I try to run with LDA. I am wondering if anyone has any good examples of configuring this. It would seem that we can't deliver in setuid mode, even though the documentation seemed to indicate that we can. I basically have a 'vmail' user (1015) that owns a /var/vmail/domains directory tree. I have set the following in postfix master.cf: # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/lib/dovecot/deliver -d ${recipient} In main.cf dovecot_destination_recipient_limit = 1 virtual_transport = dovecot virtual_mailbox_base = /var/vmail/domains virtual_mailbox_maps = ldap:/etc/postfix/ldap-mailbox.cf virtual_mailbox_domains = ldap:/etc/postfix/ldap-vdoms.cf virtual_uid_maps = static:1015 virtual_gid_maps = static:12 home_mailbox = Maildir/ and in dovecot.conf: protocols = imap imaps pop3 pop3s ssl_disable = no ssl_cert_file = /etc/ssl/certs/sauerkraut.heinous.org.crt ssl_key_file = /etc/ssl/private/sauerkraut.heinous.org.key mail_extra_groups = mail valid_chroot_dirs = /var/vmail/domains default_mail_env = maildir:/var/vmail/domains/%d/%n/mail protocol lda { postmaster_address = postmaster(a)frauerpower.com } protocol imap { } protocol pop3 { } auth default { mechanisms = plain passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } user = root } auth default_with_listener { mechanisms = plain userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } socket listen { master { path = /var/run/dovecot-auth-master mode = 0600 user = vmail group = mail } } } plugin { } However, I must be missing something. I get the following when trying to send the user a message: May 5 10:42:48 sauerkraut deliver: setuid(1015) failed: Operation not permitted May 5 10:42:48 sauerkraut postfix/pipe[28978]: ECD7FF5E: to=<leah(a)frauerpower.com>, orig_to=<root(a)oogabooga.heinous.org>, relay=dovecot, delay=1, status=bounced (Command died with status 89: "/usr/lib/dovecot/deliver") Doing 'postmap -q leah(a)frauerpower.com ldap:/etc/postfix/ldap-mailbox.cf' returns 'frauerpower.com/leah/mail/' which, in the non LDA mode worked okay, plonking the mail under /var/vmail/domains/frauerpower.com/leah/mail How is this sort of thing normally set up? Apologies in advance for my ignorance, I am pretty new to dovecot. Leah

1 1

[Dovecot] greetings and logging
by Edward Chase 05 May '06

05 May '06

Howdy, I've been working with a new CentOS installation and this is my first experience with dovecot. I would like dovecot to provide more logging, however I'm not finding much on how to alter it's logging. http://wiki.dovecot.org/DovecotFeatures speaks of having Logging Control. Can anyone point me in the right direction? Thanks. -- Edward Chase Providence College Information Technology

3 4

[Dovecot] statfs() error message
by John Wong 05 May '06

05 May '06

i use openbsd/i386, dovecot-1.0b7 i see the error message in maillog dovecot: statfs(mail/username) failed: No such file or directory i guess the statfs() can not find the directory, because i run dovecot-imap in chroot userdb static { args = uid=34567 gid=34567 home=/var/./mail } i am sure, i have this directory "/var/mail/username", and i add "nfs_check = no" to dovecot.conf, the error message will gone

1 0

[Dovecot] .imap locaction
by Obantec Support 05 May '06

05 May '06

Hi is it possible to have the .imap directory and sub-directory located under the same directory as mbox users. i.e /var/spool/mail/%u is where mbox files are i would like to use /var/spool/maildir/%u/.imap reason being i do not want my users /home/username used for anything otherthan their website. how big do the files under .imap get? Mark

2 1

[Dovecot] sigsev with postfix + dovecot SASL
by Udo Rader 05 May '06

05 May '06

hi, I am just playing a bit with the dovecot SASL plugin for postfix and so far my tests have been very successfull, can't wait to get the cyrus-sasl beast replaced. However, I found a potential problem when doing some "illegal" stuff on the postfix side: -------CUT------- cerberus:/var/log# telnet smtptest 25 Trying 192.168.99.99... Connected to smtptest.bestsolution.at. Escape character is '^]'. 220 smtptest.bestsolution.at ESMTP Postfix (bestsolution.at GmbH) EHLO localhost 250-smtptest.bestsolution.at 250-PIPELINING 250-SIZE 51200000 250-ETRN 250-AUTH PLAIN DIGEST-MD5 CRAM-MD5 250-AUTH=PLAIN DIGEST-MD5 CRAM-MD5 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN AUTH somestring 535 5.7.0 Error: authentication failed: Connection lost to authentication server -------CUT------- dovecot logs this: -------CUT------- dovecot: Apr 27 10:27:36 Error: auth(default): BUG: Authentication client 4315 requested unsupported authentication mechanism somestring dovecot: Apr 27 10:27:36 Error: child 445 (auth) killed with signal 11 -------CUT------- I am very aware that "AUTH somestring" is not valid in the given context, but dovecot should not sigsev IMO. dovecot is 1.0-beta7. regards Udo Rader b e s t s o l u t i o n . a t EDV Systemhaus GmbH ------------------------------------------------------------------------ udo rader technischer leiter/CTO mobile +43 660 5263642 ------------------------------------------------------------------------ eduard-bodem-gasse 8/3 A-6020 innsbruck fax +43 512 935833 http://www.bestsolution.at phone +43 512 935834

2 1

[Dovecot] auth-request.c: assertion failed: (*name != '\0')
by Tom Sommer 05 May '06

05 May '06

I upgraded to beta7 from alpha4, and got this error during the auth process: dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=0.0.0.0 rip=0.0.0.0 resp=<hidden> dovecot: auth-worker(default): sql(webmaster(a)example.com,0.0.0.0): query: SELECT username as user, NULL as password FROM users WHERE username = 'webmaster(a)example.com' AND password = PASSWORD('mypassword') dovecot: auth(default): file auth-request.c: line 723 (auth_request_set_field): assertion failed: (*name != '\0') dovecot: child 8552 (auth) killed with signal 6 My SQL conf: password_query = SELECT username as user, NULL as password FROM users WHERE username = '%u' AND password = PASSWORD('%w') as advised in a previous discussion in this list Regards -- Tom Sommer

3 4

[Dovecot] maildir format
by DINH Viêt Hoà 05 May '06

05 May '06

Hello Timo and other dovecot-dev or users, It looks like Dovecot accepts (with APPEND command) messages that begins with 'From[SPACE]' line, which are not valid from RFC 2822 point of view. Additionnally, Dovecot will store them as they are APPENDed, I mean with the starting 'From[SPACE]' line, which generates a bad Maildir format. http://www.qmail.org/man/man5/maildir.html states the following : << Each file in new is a newly delivered mail message. The modification time of the file is the delivery date of the message. The message is delivered without an extra UUCP- style From_ line, without any >From quoting, and without an extra blank line at the end. The message is normally in RFC 822 format, starting with a Return-Path line and a Delivered-To line, but it could contain arbitrary binary data. It might not even end with a newline. >> -- DINH Viêt Hoà

2 3

[Dovecot] Solution: NFS & Dovecot!
by Apps Lists 05 May '06

05 May '06

Hi folks! It looks like Timo nailed down the NFS issues we've been seeing here in last night's CVS build. Anyone running Dovecot in a high-usage environment should check this out. Here are some relevant ChangeLog updates that seem to address the problem: 2006-05-02 11:11 Timo Sirainen <timo.sirainen(a)movial.fi> * src/lib-storage/index/maildir/: maildir-save.c, maildir-storage.h, maildir-sync.c, maildir-uidlist.c, maildir-uidlist.h: Adding mail to index while saving it had a race condition. Fixing it required a bit larger changes. Switched uidlist/index locking order so that uidlist is now locked first. 2006-05-02 11:04 Timo Sirainen <timo.sirainen(a)movial.fi> * src/lib-index/: mail-index-private.h, mail-index-sync-update.c, mail-index.c: mmap_disable: When syncing in-memory index from transaction log, we didn't skip external transactions which were already been in our in-memory mapping, causing "Append with UID n, but next_uid = m" errors. The build is available here: http://dovecot.org/nightly/dovecot-20060503.tar.gz Thus far, I've seen no complaints of corrupted indexes or core dumps. This is absolutely fantastic. As always... hats off to Timo. Great work! Steve

3 2

[Dovecot] "fchown() failed with file" and Operation not permitted with indexes
by Gavin Henry 05 May '06

05 May '06

Dear all, Getting lots of these errors in our maillog with the INDEX changed: dovecot: IMAP(ghenry): fchown() failed with file /home/ghenry/Maildir/index/.INBOX/dovecot.index.tmp: Operation not permitted For .log and .cache as well. We have: location = maildir:/home/%u/Maildir:CONTROL=%h/Maildir/control:INDEX=%h/Maildir/index I looked in safe-mkdir.c and saw: fchown() failed for (line 42) to change the owner first, so don't know why we are getting this error? Thanks, Gavin. -- Kind Regards, Gavin Henry. Managing Director. T +44 (0) 1224 279484 M +44 (0) 7930 323266 F +44 (0) 1224 742001 E ghenry(a)suretecsystems.com Open Source. Open Solutions(tm). http://www.suretecsystems.com/

3 5

[Dovecot] dovecot LDA and pop3 session lock question
by Ken A 05 May '06

05 May '06

If pop3_lock_session = yes, how does Dovecot LDA handle the situation when the pop3 mbox is locked? Does it requeue mail for later delivery immediately (EX_TEMPFAIL), or wait until mbox_lock_timeout? Thanks, Ken A. Pacific.Net

2 2

[Dovecot] Problems with Dovecot 1.0 beta7 rpm form atrpm for RHEL4
by Oliver Schulze L. 05 May '06

05 May '06

Hi, I just want to install dovecot 1.0 beta7 from atrpm and noted that it depends on a non official dependency. If you have RHEL4 (Centos) 4.3 fully updated and you try to install: http://dl.atrpms.net/all/dovecot-1.0-0_10.99.beta7.el4.at.i386.rpm You get this error: # rpm -ivh dovecot-1.0-0_10.99.beta7.el4.at.i386.rpm error: Failed dependencies: openssl >= 0.9.7f-4 is needed by dovecot-1.0-0_10.99.beta7.el4.at.i386 The lates official openssl version for RHEL 4.3 is: # rpm -q openssl openssl-0.9.7a-43.8 I think I can solve this problem by compiling the src.rpm, but I get this error: # rpmbuild --rebuild --target=i686 --clean dovecot-1.0-0_10.99.beta7.el4.at.src.rpm Installing /opt/shares/tmp/dovecot-1.0-0_10.99.beta7.el4.at.src.rpm Building target platforms: i686 Building for target i686 error: line 4: Tag takes single token only: Release: 0_%atrelease 10.99.beta7 How can I compile the .src.rpm from atrpm? It seems that there is an error in the spec file: This line: Release: 0_%atrelease 10.99.beta7 should it looks like this: Release: 0_%{atrelease}10.99.beta7 Many thanks Oliver -- Oliver Schulze L. <oliver(a)samera.com.py>

3 13

[Dovecot] support for no modules, patch
by Jens Laas 05 May '06

05 May '06

--- src/lib/module-dir.c~ 2006-02-26 13:14:12.000000000 +0100 +++ src/lib/module-dir.c 2006-05-05 11:09:11.000000000 +0200 @@ -255,8 +255,8 @@ } #else - struct module *module_dir_load(const char *dir __attr_unused__, + const char *module_names __attr_unused__, bool require_init_funcs __attr_unused__) { i_error("Dynamically loadable module support not built in"); ----------------------------------------------------------------------- 'Old C programmers don't die ... they're just cast into void*' ----------------------------------------------------------------------- Jens Låås Email: jens.laas(a)data.slu.se Department of Computer Services, SLU Phone: +46 18 67 35 15 Vindbrovägen 1 P.O. Box 7079 S-750 07 Uppsala SWEDEN -----------------------------------------------------------------------

1 0

[Dovecot] running only the dovecot-auth service
by Udo Rader 05 May '06

05 May '06

Hi, we are just testing postfix 2.3 in combination with its new dovecot SASL plugin. Now what we would like to have was dovecot SASL without acutally running dovecot ... The reason for this is because we have the "real" dovecot running on a different server than the postfix instance and it would be nice if it would not be necessary running an "full" dovecot on that server for only SASL support. So is it possible to start only the "dovecot-auth" part of dovecot? Another idea that I had was to export the created auth socket via nfs. Somewhere, sometimes I think to have read that it was possible to use unix domain sockets over nfs mounted shares, but I am not sure about this (and have failed so far). Udo Rader -- bestsolution.at EDV Systemhaus GmbH http://www.bestsolution.at

2 2

[Dovecot] Bug in new mail-index-transaction.c
by Bill Boebel 04 May '06

04 May '06

These changes apparently broke something: > 2006-04-24 09:17 Timo Sirainen <timo.sirainen(a)movial.fi> > > * src/lib-index/mail-index-transaction.c: Fixed crash while > updating keywords (broken by recent changes). > > 2006-04-20 14:10 Timo Sirainen <tss(a)iki.fi> > > * src/lib-index/mail-index-transaction.c: If we sorted appended > messages, we weren't sorting extensions and keywords so they were > mapped to wrong messages (dbox-only problem, keywords not yet > fixed by this change). What I am seeing is when there are messages that have keywords set, Dovecot occasionally hangs while building the index and/or uidlist. It leaves a lock file "dovecot-uidlist.lock" around and the IMAP process reading that folder never completes successfully. To fix it, I have have to rename the message files to remove the keyword. For example: $ mv 1146246349.P365Q2.mail1b.r1.iad.emailsrvr.com:2,Sa 1146246349.P365Q2.mail1b.r1.iad.emailsrvr.com:2,S I reverted back to the copy of src/lib-index/mail-index-transaction.c from the 4/14/2006 CVS snapshot, and this problem completely went away. And mailboxes that were encountering the .lock problem suddenly worked again. If there is any additional information that you need in order to troubleshoot this bug, please let me know and I'll be happy to send it. Bill

2 2

Re: [Dovecot] Expunge is not expunging unless it is called twice
by Bill Boebel 03 May '06

03 May '06

On Tue, May 2, 2006 18:21, Timo Sirainen <tss(a)iki.fi> said: > > Dovecot is requiring two "expunge" calls before it deletes an email. It just >> seems to ignore the first expunge call, leaving the email file in the maildir cur/ >> folder. Any idea why? I even waited 10 seconds after setting the Deleted flag, >> but still the first expunge call did nothing.... > > Fixed now. > I have tested this and works now. Thanks, Bill

1 0

[Dovecot] help server crash
by Luis Atala 03 May '06

03 May '06

chek this out how can i fix this pple? http://channels.debian.net/paste/2475 http://channels.debian.net/paste/2476 pls i need help

3 11