- dovecot - dovecot.org

Re: [Dovecot] How to change login_greeting ?
by spart cus 30 Mar '06

30 Mar '06

Note: forwarded message attached. --------------------------------- Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.

1 0

[Dovecot] Dovecote Make failure with MySQL support.
by Nathan 30 Mar '06

30 Mar '06

Hello all. I am trying to compile Dovecot from source on an AMD Opteron based Sun server running Solaris 10. I ran the configue script with the mysql flag on because I need mysql auth support. I am running MySQL version: 5.0.18 Here is where the make fails. Any suggestions? *** Error code 1 make: Fatal error: Command failed for target `driver-mysql.o' Current working directory /export/home/nathan/dovecot-1.0.beta3/src/lib-sql *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='lib lib-dict lib-sql lib-ntlm lib-settings lib-charset lib-mail lib -imap lib-index lib-storage lib-auth auth dict master login-common imap- login imap pop3-login pop3 util plugins'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /export/home/nathan/dovecot-1.0.beta3/src *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /export/home/nathan/dovecot-1.0.beta3 *** Error code 1 make: Fatal error: Command failed for target `all' Thanks for your time.

1 0

[Dovecot] sig11 with 1.0.beta3 on openbsd-i386
by David Gwynne 30 Mar '06

30 Mar '06

i recently helped a friend of mine migrate from imap-uw using mboxes to dovecot on top of Maildirs and came up against two issues. this is quite embarrassing as ive been claiming dovecot is Solid As A Rock(tm) and hasn't ever given me any issues. 1. if dovecot runs out of file descriptors it will loop forever trying to open new logging pipes. the code in question is at line 624 of src/master/login-process.c 2. we get a sig11 in the imap process. heres the bt: dlg@mail dlg$ gdb -c imap.core /usr/local/libexec/dovecot/imap GNU gdb 6.3 Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-openbsd3.9"... Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. Reading symbols from /usr/local/lib/libiconv.so.4.0...done. Loaded symbols for /usr/local/lib/libiconv.so.4.0 Reading symbols from /usr/lib/libc.so.39.0...done. Loaded symbols for /usr/lib/libc.so.39.0 Reading symbols from /usr/libexec/ld.so...done. Loaded symbols for /usr/libexec/ld.so #0 0x1c04895a in mail_transaction_log_view_set (view=0x7f0b8300, min_file_seq=2, min_file_offset=208, max_file_seq=2, max_file_offset=208, type_mask=MAIL_TRANSACTION_APPEND) at mail-transaction-log-view.c:107 107 if (min_file_seq == view->log->tail->hdr.prev_file_seq && (gdb) bt #0 0x1c04895a in mail_transaction_log_view_set (view=0x7f0b8300, min_file_seq=2, min_file_offset=208, max_file_seq=2, max_file_offset=208, type_mask=MAIL_TRANSACTION_APPEND) at mail-transaction-log-view.c:107 #1 0x1c044e91 in view_sync_set_log_view_range (view=0x7efaa800, type_mask=65532) at mail-index-view-sync.c:102 #2 0x1c045109 in mail_index_view_sync_begin (view=0x7efaa800, sync_mask=252, ctx_r=0x2) at mail-index-view-sync.c:216 #3 0x1c037e58 in index_mailbox_sync_init (box=0x82cf2840, flags=28, failed=8) at index-sync.c:151 #4 0x1c01bbb4 in maildir_storage_sync_init (box=0x82cf2840, flags=28) at maildir-sync.c:1343 #5 0x1c04c270 in mailbox_sync_init (box=0x2, flags=28) at mail-storage.c:375 #6 0x1c0167fa in imap_sync_init (client=0x7f0b8000, box=0x82cf2840, imap_flags=2, flags=28) at imap-sync.c:46 #7 0x1c016c80 in cmd_sync (cmd=0x7f0b8044, flags=28, imap_flags=0, tagline=0x3c0005cf "OK Search completed.") at imap-sync.c:231 #8 0x1c00ff9f in cmd_search (cmd=0x7f0b8044) at cmd-search.c:99 #9 0x1c010fb5 in cmd_uid (cmd=0x7f0b8044) at cmd-uid.c:19 #10 0x1c01186b in client_handle_input (cmd=0x7f0b8044) at client.c:364 #11 0x1c01199a in _client_input (context=0x7f0b8000) at client.c:415 #12 0x1c05d0a4 in io_loop_handler_run (ioloop=0x848ed220) at ioloop-kqueue.c:200 #13 0x1c05c701 in io_loop_run (ioloop=0x80e6a000) at ioloop.c:246 #14 0x1c0184f3 in main (argc=1, argv=0xcfbd5554, envp=0xcfbd555c) at main.c:238 (gdb) x view->log->tail->hdr.prev_file_seq Cannot access memory at address 0x7f0bca (gdb) x view->log->tail->hdr Cannot access memory at address 0x7f0bbe (gdb) x view->log->tail 0x7f0b82: Cannot access memory at address 0x7f0b82 (gdb) x view->log 0x7f0b8181: 0x007efaa2 in both cases the problem was triggered with Apple Mail 2 as the client. the user has maybe a dozen mailboxes, the largest of which is aoubt 10k messages. if you need any more detail, please dont hesitate to ask. i would like this to work so i dont have to keep apologising. dlg

1 0

[Dovecot] Realm Stripping
by Michael Baird 30 Mar '06

30 Mar '06

I saw some discussion on this from the middle of last year. Looking through the archives, there didn't seem to be a full solution using a standard dovecot configuration. Did this issue get resolved within dovecot? Will it strip domains from the login presented by the customer. I currently am using dovecot for imap with a webmail system (I strip the domain there before it hits dovecot), but I'd like to replace qpopper with dovecot's pop3, just need to work out the domain stripping bit. Regards Michael Baird

2 1

[Dovecot] Solution to Dovecot-lda configure problem on RHEL4/FC4
by Tomi Hakala 29 Mar '06

29 Mar '06

Hello, After a long break from Dovecot I finally managed to compile Dovecot-lda on RHEL 4 x86_64 platfrom. For some reason $LIBICONV translates to a @LIBICONV@ on config.status which generates loop for sed. Solution is to manually edit "configure" after autogen.sh. In configure change line s,@LIBICONV@,$LIBICONV,;t t to s,@LIBICONV@,,;t t After this configure finishes succesfully. Tomi

1 0

[Dovecot] How to change login_greeting ?
by Jefferson Briones 29 Mar '06

29 Mar '06

Hi guys, How can i change the login greeting for dovecot whenever someone telnets to it. I tried putting login_greeting = Test Banner at the end of my dovecot.conf.:When i try restart the service it fails. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] [PATCH] integrate dovecot LDA into dovecot
by Timo Sirainen 29 Mar '06

29 Mar '06

(ops, messed up the first send, again) > what do you think about replacing the deliver source in dovecot with > deliver from dovecot LDA? It would make it much easier to compile and > deploy dovecot LDA. It would, but I don't want that, at least not currently. My plan is to merge them in some way at some point, but the Sieve code will always be kept out of the main Dovecot tarball as some kind of plugin. The Sieve code is something I don't really want to touch myself, and I don't want it to be included in Dovecot's "1000 EUR for security hole" competition (or whatever it should be called). Since the patch was a bit too large, I didn't accept your original mail to the list.

1 0

[Dovecot] new mails don't always show
by Bjoern Rost 29 Mar '06

29 Mar '06

Hi, I am having some trouble with dovecot (0.99.14) and maildir. Some users are reporting that sometimes, they don't get (pop3, various clients) new mails for a while even though they should. I checked and confirmed this: mails were delivered by MTA (sendmail, procmail). But when the problem existed, the new mails were in cur/, not new/ and dovecot would not report any new messaged to the client. A 'solution' was to send another mail to the same account, and ususally this would end up in new/ On the next fetch, this new message and the new ones from cur/ are downloaded. I also had the same problem with imap and evolution today. My inbox showed as empty but there were many messages in cur/ I could access all other folders without a problem during this period. Again, a simple mail to myself 'solved' this. This behaviour does not happen all the time and I don't know how to trigger/reproduce it. Just the relevant (imho) parts of dovecot.conf: login_process_size = 256 login_processes_count = 64 login_max_logging_users = 1024 default_mail_env = maildir:%h/Maildir client_workarounds = outlook-idle oe6-fetch-no-newmail outlook-pop3-no-nuls everything else is set to default values Any ideas/help? Thanks Bjoern -- Bjoern Rost portrix.net GmbH Stresemannstr. 375 22761 Hamburg Germany fon +49-40-39 80 53 - 19 fax +49-40-39 80 53 - 29 http://www.portrix.net

6 8

[Dovecot] Too many links
by Feraudet Cyril 29 Mar '06

29 Mar '06

Hi all, I've a problem during a big migration to dovecot. I'm not sure that is a really a dovecot bug ... but maybe somebody here know one solution ... I have more than 150000 imap account to migrate from an obscure mail system based on a database to an imap/dovecot system. During the migration (simple but very long process) I get a "Too many links" error from dovecot. This error is not obscure but I'm unable to find a solution with this error on google. I kown the /proc/sys/fs/file-max for increase the number of open file, but it's not the problem here. This probleme occure with more than 130000 directory and more than 350000 file. Have you an idea ? Thank, Cyril Feraudet

2 1

Fwd: [CentOS] Fwd: Re: [Dovecot] Timeout when downloading messages
by spart cus 29 Mar '06

29 Mar '06

Note: forwarded message attached. --------------------------------- New Yahoo! Messenger with Voice. Call regular phones from your PC for low, low rates.

1 0

[Dovecot] Timeout when downloading messages
by spart cus 29 Mar '06

29 Mar '06

Hi to All Gurus, Im having some problem with my mail server. Sending works perfectly but the problem is when my clients are receiving theyre mails. For example theyre downloading 20 mails, somehow when it reaches to 12 it disconnectes. Or the outlook client pops up some messages saying connection timeout? Im using dovecot and postfix for my mails server. tia --------------------------------- Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.

1 0

[Dovecot] Problems with Fedora core 5, Dovecot and Thunderbird
by Robert Hart 29 Mar '06

29 Mar '06

Hi I am testing FC5 before upgrading my main server and I am getting errors with dovecot 1.0 beta3 - both the distributed RPM and also the one at ATrpms thunderbird (the distributed version which is thunderbird-1.5-6) I am running both dovecot and thunderbird on the same machine, pointing thunderbird at 127.0.0.1 for its imap server. The symptoms are an inability to access mail - thunderbird just keeps on trying and getting nowhere and even if I shut down thunderbird on the client, it still leaves processes running that have to be killed by hand. In the maillog I get Mar 29 09:17:25 bree dovecot: imap-login: Login: user=<hartr>, method=plain, rip=::ffff:127.0.0.1, lip=::ffff:127.0.0.1, secured Mar 29 09:17:25 bree dovecot: imap(hartr): mbox sync: UID inserted in the middle of mailbox /var/mail/hartr (8 > 1, seq=2, idx_msgs=4) Mar 29 09:17:25 bree dovecot: imap(hartr): file mbox-sync-update.c: line 55 (mbox_sync_move_buffer): assertion failed: (ctx->mail.offset + ctx->mail.space <= ctx->hdr_offset + pos || ctx->mail.offset > ctx->hdr_offset + pos + have) Mar 29 09:17:26 bree dovecot: child 14242 (imap) killed with signal 6 When I point this thunderbird at my main (dovecot 0.99) server everything is fine, we seems to suggest that this is a dovecot problem and not a thunderbird one. Can anyone give me any pointers on this please as it's a show stopper for upgrading my main server. Tks -- Robert Hart hartr(a)interweft.com.au +61 (0)438 385 533 http://www.hart.wattle.id.au

1 0

[Dovecot] login problem
by jasper 28 Mar '06

28 Mar '06

X-Tech Space-MailScanner-Information: Please contact the ISP for more information X-Tech Space-MailScanner: Found to be clean X-Tech Space-MailScanner-From: redhat(a)techspace.nl I use pam to login my users are stored as j.hendriks now i like to use 2 domains but with the same user and passw and the option that de mail is stored in a difrent directory but i cant get rit of the @domain extention by Autentification made these canges. auth_process_size = 256 auth_cache_size = 5000 auth_cache_ttl = 3600 passdb pam { args = session=yes args = service name="*" args = cache_key=%n args = dovecot } but keeps Autentificating me as j.hendriks@domain insted of j.hendriks what am i doing wrong. help please. -- Dit bericht is gescanned op virussen en andere gevaarlijke inhoud door Techspace mailscanner en lijkt schoon te zijn.

1 0

Re: [Dovecot] user name translation
by jasper 28 Mar '06

28 Mar '06

I'v read about this for virtual users bus were do i put this for pam authentication but i'm using the /etc/schadow file by pam so were do i implement te %n . in the dovecot.conf or the pam.d/dovecot or is there a new line in the updated verson of dovecot. thanks. On Tue, 28 Mar 2006 09:15:04 +0100, Daniel Watts wrote > jasper wrote: > > > > i have the next question i like to authenticate users only by user ant > > not by user@domain <mailto:user@domain> > > > > i'm using pam for authentication the users are stored bij first lette > > for name then back name > > > > J.Hendriks so no domain included. > > > > bu i want them to login as J.Hendriks@domain > > <mailto:J.Hendriks@domain> so i kan use the same user for more domains > > > > in diverent mail folders b.v. mail_folder= home/%d/%u > > > > but now pam is authenticating as user name J.Hendriks@domain > > <mailto:J.Hendriks@domain> and not J.Hendriks. > > > > is there a way to cut of @domain from name. > > > > > > > use %n for the username part of username(a)domain.com > Daniel > > -- > Dit bericht is gescanned op virussen en andere gevaarlijke > inhoud door Techspace mailscanner en lijkt schoon te zijn. - Als echtparen echt paren hebben echtgenoten echt genoten -- Dit bericht is gescanned op virussen en andere gevaarlijke inhoud door Techspace mailscanner en lijkt schoon te zijn.

1 0

[Dovecot] user name translation
by jasper 28 Mar '06

28 Mar '06

i have the next question i like to authenticate users only by user ant not by user@domain i'm using pam for authentication the users are stored bij first lette for name then back name J.Hendriks so no domain included. bu i want them to login as J.Hendriks@domain so i kan use the same user for more domains in diverent mail folders b.v. mail_folder= home/%d/%u but now pam is authenticating as user name J.Hendriks@domain and not J.Hendriks. is there a way to cut of @domain from name. -- Dit bericht is gescanned op virussen en andere gevaarlijke inhoud door Techspace mailscanner en lijkt schoon te zijn.

1 0

[Dovecot] Timeout when receiving messages with attachment
by spart cus 28 Mar '06

28 Mar '06

Hi guys, just recently got a problem with my mail server. My clients are comlaining that whel receiving theyre emails after 7 mails received suddenly the connection has timeout. Another scenario is with attachments. Sending 1MB of attachment is not a problem, but receiving this attachement is. Suddenly it timeout for some while. Anyone has a solution for these ? tnx --------------------------------- Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.

1 0

Re: [Dovecot] Message Filenames
by Marilyn Davis 28 Mar '06

28 Mar '06

> Timo Sirainen tss at iki.fi > Sat Mar 25 11:12:27 EET 2006 > > On Sat, 2006-03-18 at 13:39 -0800, Charlie Davis wrote: > > Is there anyway to get a message's filename through the imap server? I've > been developing a program for awhile and just switched to dovecot from > > > > courier. Courier had a file that for every line was like: > > > > <message uid> <message filename> > > > > Is there anway to get this information out of dovecot? > > Yea, dovecot-uidlist file has the exact same format as long as you're > using maildir. We're new to dovecot (and really enjoying its speed and good sense!) We are delivering via exim, not yet using the dovecot-lda, and we are delivering to maildirs, but we don't seem to have any dovecot-uidlist files. What are we missing? Thank you, Marilyn

2 2

[Dovecot] dovecot died
by Marten Lehmann 28 Mar '06

28 Mar '06

Hello, today our dovecot imap server died. The following message appeared in the logfile: dovecot: Mar 23 07:00:58 Error: pipe() failed: Too many open files We have one dovecot instance for pop3 and one for imap, so while the pop3-service was still available, the imap-service was not running any more. I've seen a lots of users keeping there imap-connections idle for hours, often more than one per mailbox. How can I limit this? Can I limit the maximum time a connection can be open? Regards Marten

5 9

[Dovecot] [PATCH] multiple "make install"s fail with 1.0.beta3
by Richard Laager 27 Mar '06

27 Mar '06

I think the subject covers it. Here's the error: Making install in convert make[3]: Entering directory `/root/dovecot-1.0.beta3/src/plugins/convert' make[4]: Entering directory `/root/dovecot-1.0.beta3/src/plugins/convert' mkdir -p -- /usr/lib/dovecot/imap /usr/lib/dovecot/pop3 /usr/lib/dovecot/lda for d in imap pop3 lda; do \ rm -f /usr/lib/dovecot/$d/lib02_trash_plugin.so; \ ln -s ../lib01_convert_plugin.so /usr/lib/dovecot/$d; \ done ln: `/usr/lib/dovecot/imap/lib01_convert_plugin.so': File exists ln: `/usr/lib/dovecot/pop3/lib01_convert_plugin.so': File exists ln: `/usr/lib/dovecot/lda/lib01_convert_plugin.so': File exists Richard

1 0

[Dovecot] Re: OS X-centricities? Too many files, temp, indexes, etc...
by Roger Weeks 27 Mar '06

27 Mar '06

We're an ISP with approximately 9000 email customers. Up until early in January our primary mail servers ran on OS X, with exim as the MTA and courier-imap as the pop/imap server. We had continual problems with courier on OS X. The load it generates on the machine is horrible. You'll get absolutely no help from the courier mailing list or developers with OS X issues. When we started evaluating Dovecot, we first attempted it on OS X, however we were unable to get it running in an NFS environement on OS X in any sort of stable manner. I can't recommend highly enough getting off of OS X if you can for mail services. We went to Red Hat machines, and they have been amazingly stable and reliable. I love OS X, and use it for other things, but it makes a bad mail server at least for the volume of mail we process. -- Roger J. Weeks Systems & Network Administrator Mendocino Community Network On Mar 26, 2006, at 12:24 AM, dovecot-request(a)dovecot.org wrote: > Message: 2 > Date: Sat, 25 Mar 2006 09:22:18 -0800 > From: Dean Blackburn <dean.blackburn(a)viz.com> > Subject: Re: [Dovecot] OS X-centricities? Too many files, temp, > indexes, etc... > To: dovecot(a)dovecot.org > Message-ID: <44257C4A.6030801(a)viz.com> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Timo Sirainen wrote: >>> 1) Too many files open - no plimit command on OS X, so I can't >>> figure >>> out how to increase the max number of open files... Also, are >>> there any >>> alternative means of CLOSING the files? stopping/restarting dovecot >>> didn't seem to help; >>> >> >> Which process is running out of them? There are multiple Dovecot >> processes, and each could have a different reason of running out >> of file >> handles. >> >> > dovecot: Mar 24 11:35:51 Error: imap(yukimurashige): pipe() failed: > Too > many open files > dovecot: Mar 24 11:35:51 Error: child 21465 (imap) returned error 89 > >>> 2) I was running 1.0beta1 last week, and am now on 1.0beta3, but I'm >>> still not seeing corrupt indexes/other dovecot files rebuilding >>> themselves. I really can't stick with this solution if I'll >>> always have >>> to worry about manually fixing broken caches/indexes. >>> >> >> First of all they shouldn't anymore be corrupting themselves at least >> easily. What exactly are the error messages you're seeing? >> >> > Lots of this: > > dovecot: Mar 24 12:18:45 Error: imap(mikitanaka): Corrupted index file > /Users/mikitanaka/Maildir/dovecot.index: uid_validity = 0, next_uid > = 1366 > > Some of this: > > dovecot: Mar 24 10:55:45 Error: imap(kristinegivas): imap(19936) > malloc: > *** error for object 0x602200: incorrect checksum for freed object - > object was probably modified after being freed, break at > szone_error to > debug > > And occasionally this: > > dovecot: Mar 24 11:00:14 Error: imap(deanblackburn): Maildir > /Users/deanblackburn/Maildir sync: UID inserted in the middle of > mailbox > (1042 > 1041, file = 1143071249.Ve000008I8e7f3b40.mailserv.local:2,Sk) > > That's just yesterday's errors, we've seen some others as well. But > they > all go away if one deletes dovecot* from the affected directory, and > they don't go away on their own. Also, we'll see a huge number of > temp.* > files build up within the maildir once these files "go bad"... > > From the client perspective, you either get a "connection timed out" > error, or on some less robust clients, "connection refused by IMAP > server". >> Also as far as I know they're rebuilding themselves automatically in >> most situations. Only if Dovecot crashes because of the corruption it >> doesn't get rebuilt. If it's not crashing with you, could it be just >> that they keep re-breaking all the time? >> > Definitely possible. ;) How can we tell? > > If we can solve these issues, we'll be very happy with Dovecot... > Courier seems a lot more solid, in retrospect, but required so much > disk > access it was completely unusable by our staff. In contrast, > Dovecot is > fast, light on resources, but will break around 5-10 individuals' > mailboxes every day. So far, we just can't win! > > -deano

1 0

[Dovecot] LDA sieve library
by Luca Corti 27 Mar '06

27 Mar '06

Hello, is the LDA linked against the Cyrus SIEVE library or against the fork at libsieve.sourceforge.net ? It seems Cyrus SIEVE from src/libsieve/README in the lda sources. libsieve seems to be better suited for inclusion in non-cyrus software and should be completely independent from libcyrus. The README for cyrus version of libsieve also states that: "It should compile without libcyrus, but then it does not implement the "address" test." thanks -- Luca Corti PGP Key ID 1F38C091 BOFH excuse of the moment: Interference from the Van Allen Belt.

2 2

[Dovecot] FreeBSD 5.4/Dovecot 1.0.b3: lots of error messages
by Martin Jangowski 27 Mar '06

27 Mar '06

Hi! I installed Dovecot from the FreeBSD port. I have about 20 users on this machine and used popper before switching. I get a lot of error messages like: dovecot: Mar 21 10:03:41 Error: pop3(xxx): mbox sync: UID inserted in the middle of mailbox /var/mail/xxx (37326 > 35874, seq=1, idx_msgs=26) dovecot: Mar 21 10:06:17 Error: imap(yyy): mbox sync: UID inserted in the middle of mailbox /var/mail/yyy (37352 > 36945, seq=1, idx_msgs=2) dovecot: Mar 21 10:06:18 Error: imap(yyy): kevent(1) in io_loop_handle_add() failed: Bad file descriptor dovecot: Mar 21 10:06:18 Error: imap(yyy): kevent(1) in io_loop_handle_remove failed: Bad file descriptor dovecot: Mar 21 10:06:22 Error: imap(yyy): mbox sync: UID inserted in the middle of mailbox /var/mail/yyy (37354 > 36945, seq=1, idx_msgs=205) Most of the errors are the mbox sync messages. The users report that they get all mails double, triple and more... I think this is connected to the UID problem. My config file looks like that: protocols = imap imaps pop3 disable_plaintext_auth = no log_path = /var/log/dovecot.err info_log_path = /var/log/dovecot.info log_timestamp = "%b %d %H:%M:%S " login_process_size = 64 verbose_proctitle = yes first_valid_gid = 0 mail_extra_groups = mail default_mail_env = mbox:/var/mail/%u protocol imap { imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } protocol pop3 { login_executable = /usr/local/libexec/dovecot/pop3-login mail_executable = /usr/local/libexec/dovecot/pop3 pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root } plugin { } Any ideas? Grüße aus Hohenlohe, Martin Jangowski | Martin Jangowski E-Mail: Martin(a)Jangowski.de| | Netzwerke und Multimedia | | Voice: +49 7946/940790 Fax: +49 7946/940791 | | Snail Mail: Von-Olnhausen Str. 4 74626 Bretzfeld Germany |

2 2

[Dovecot] Installing Dovecot on CentOS
by James A 27 Mar '06

27 Mar '06

I use CentOS 3.5 and want to install Dovecot, but I got this error : # yum install dovecot Gathering header information file(s) from server(s) Server: Centos-3 - i386/i686 - Addons Server: Centos-3 - i386/i686 - Base Server: Centos-3 - i386/i686 - Extras Server: Centos-3 - i386/i686 - Updates Finding updated packages Downloading needed headers Cannot find a package matching dovecot No actions to take Is it discontinued ? JA __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

3 2

[Dovecot] %d empty even though username has @domain
by William Ross 27 Mar '06

27 Mar '06

hello, Sorry to jump straight in with a question, but I've searched the archive[0] and I'm pretty sure the answer's not there. I'm using dovecot to replace courier imap, so authentication is by vpopmail and the Maildirs are stored in the usual domains/domain/user/ Maildir. Everything seems to work very well, and setting it up has been easy, so thank you very much for that. I have only one problem left: %d is empty when interpolated into default_mail_env. I expect there's something obvious I'm doing wrong, but it's hard to tell because the wiki isn't always up to date (i'd be happy to update the vpopmail sections once this is working): Config has this [1]: default_mail_env = maildir:/home/vpopmail/domains/%d/%n/Maildir and i log in over imaps with the account i'm using for testing: username: sysadmin(a)spanner.org password: ... Authentication seems to work perfectly, but then the logs show: dovecot: Dec 05 12:24:59 Info: imap(sysadmin): maildir: root=/home/ vpopmail/domains//sysadmin/Maildir, index=/home/vpopmail/domains// sysadmin/Maildir, control=, inbox= any suggestions, please? thank you, will [0] This has come up before: http://dovecot.org/list/dovecot/2005- June/007530.html [1] the rest of dovecot.conf, less comments: base_dir = /var/run/dovecot protocols = imaps log_path = /var/log/dovecot mail_debug = yes protocol imap { } protocol pop3 { } auth_verbose = yes auth default { mechanisms = plain passdb vpopmail { args = } userdb vpopmail { } userdb prefetch { } user = root } namespace private { separator = . prefix = INBOX. inbox = yes } default_mail_env = maildir:/home/vpopmail/domains/%d/%n/Maildir pop3_uidl_format = %v-%u ssl_cert_file = /usr/local/ssl/certs/dovecot.pem ssl_key_file = /usr/local/ssl/private/dovecot.pem

4 5

Re: [Dovecot] Dovecot 1.0 beta3 and SUBSCRIBE
by Bertrand Leboeuf 27 Mar '06

27 Mar '06

Thanks but for mbox it is ".subscriptions", "subscriptions" is for maildir, but I found the BUG !!! ~/mail/.subscriptions is on an NFS mounted filesystem, it keeps on getting deleted... does not like NFS (the files are renamed .nfsXXXXX when deleted) if I patch the code to get it on a local filesystem, like my indexes (in storage->index_dir instead of storage->dir): /var/indexes/%u/.subscriptions then it stays alive and work. Bertrand >On Tue, 21 Mar 2006 11:40:05 -0500 (EST) >Bertrand Leboeuf <leboeuf(a)emt.inrs.ca> wrote: > >> Any clues > >Rename .subscriptions to subscriptions > >-- > >Brian Morrison >

3 3

[Dovecot] Clash between multiple authentication databases (security problem?)
by dovecot-ri 26 Mar '06

26 Mar '06

Hi all, I just installed dovecot-1.0_beta2 and love it! However, I've run into issues using multiple authentication databases. I use both pam (for users on my system) and sql (for virtual users). I've noticed that if I have system user "userabc" and virtual user "userabc(a)otherdomain.com" (two distinct users) and my "auth default" section contains these passdb/userdb entries in this order (the order in the example config): passdb pam passdb sql userdb pam userdb sql then when userabc(a)otherdomain.com logs in, he'll get the system user userabc's mail instead of his own. It appears that the sql password check succeeds, then Dovecot grabs the home directory from pam, NOT sql. I can work around this by setting up "userdb prefetch" and adding that section *before* "userdb pam". If I put "userdb prefetch" after "userdb pam" or after "userdb sql", then Dovecot doesn't actually do the prefetch (which causes an error since Dovecot issues the default SQL query for "user_query", which my MySQL database doesn't like). Is there a safer way to do this? If not, should there be? Thanks! Richard ====================================================== complete working dovecot.conf: ====================================================== first_valid_uid = 900 mail_debug = yes default_mail_env = maildir:%h/.maildir maildir_copy_with_hardlinks = yes protocol imap { login_greeting_capability = yes } protocol pop3 { } auth_debug = yes auth default { mechanisms = plain passdb pam { args = "*" } passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb prefetch { } userdb passwd { } userdb sql { args = /etc/dovecot/dovecot-sql.conf } user = root } ====================================================== dovecot-sql.conf: ====================================================== driver = mysql connect = host=/var/run/mysqld/mysqld.sock user=mail password=** dbname=mail default_pass_scheme = SSHA password_query = <query that returns user, password, userdb_home, userdb_uid, userdb_gid>

2 2

Re: [Dovecot] Dovecot LDA + Fedora destribution = no go?
by Marilyn Davis 26 Mar '06

26 Mar '06

> Jakob Hirsch jh at plonk.de > Sat Mar 25 04:40:29 EET 2006 > Quoting Charlie Davis: > > > Anyone know of a way to get the LDA to work on the fedora distribution > > available on yum? I'm a big fan of the whole yum-auto-updating thing but > > if this isn't possible, I'll go tarball. > > To use the LDA, AFAIK you'll have to go CVS. Going CVS, can we build and install dovecot-lda and keep the dovecot executable the way it is? Or do we have to rebuild the dovecot executable from the CVS tree too? Thank you. Marilyn Davis

4 7

[Dovecot] Some moved or copied messages get stuck in tmp
by Luis Meléndez 26 Mar '06

26 Mar '06

Hello. I have seen in recent posts that there are other people with this problem, and it is very important for me, as it is the only cause for not putting Dovecot in production in all mail servers in my University. When moving/copying messages, some of them get stuck in the tmp directory of the destination folder, effectively lost for the user. I have been tracing the problem, and it looks that it happens with messages that have flags. The others don't have problems. But if I copy/move several flagged messages, one of them is copied, and the others are kept in tmp. In maildir-save.c there is the following comment: /* if we have flags, we'll move it to cur/ directly, because files in new/ directory can't have flags. alternative would be to write it in new/ and set the flags dirty in index file, but in that case external MUAs would see wrong flags. */ that looks like a clue. It happens with CVS versions 20060320 and 20060325 I hace done almost all tests with Thunderbird. Best regards. -- +----------------------------------------------^-----------------------+ | Luis Meléndez Aganzo ^ Email: luism(a)uco.es | | Servicio de Informática ^ Tlf: 34-(9)57-211022 | | Área de Sistemas ^ Fax: 34-(9)57-218116 | | Universidad de Córdoba (SPAIN) ^ http://www.uco.es | +----------------------------------------------^-----------------------+

2 2

[Dovecot] OS X-centricities? Too many files, temp, indexes, etc...
by Dean Blackburn 25 Mar '06

25 Mar '06

I'm just writing to see if anyone else is seeing the following issues, and particularly if they are running OS X (especially 10.4), and/or have compatible solutions (I've been reading the mailing list quite a bit, and every now and then, I find a solution that just "doesn't work" because of the differences in OS: 1) Too many files open - no plimit command on OS X, so I can't figure out how to increase the max number of open files... Also, are there any alternative means of CLOSING the files? stopping/restarting dovecot didn't seem to help; 2) I was running 1.0beta1 last week, and am now on 1.0beta3, but I'm still not seeing corrupt indexes/other dovecot files rebuilding themselves. I really can't stick with this solution if I'll always have to worry about manually fixing broken caches/indexes. 3) Any advice on fcntl/flock on OS X, particularly? They both appear to work, but I'd prefer to use the fastest/least resource intensive options for everything if possible. Thanks! -deano

3 3

[Dovecot] Filesystem full/quota limitations and Dovecot
by Tony Kay 25 Mar '06

25 Mar '06

How does Dovecot handle accounts when writes are denied, such as in situations when a user is over quota, or the filesystem is full? -- Anthony Kay University Computing Center (541) 346-1719 GPG Fingerprint: B0DB D46A 60AF FAE7 A94A 5075 0CB4 4D88 9F4F 7F09 Only a statue can be perfect, and even then it casts a shadow. - Merle Fossum

2 1

[Dovecot] Corrupted transaction log file dovecot.index.log: unexpected end of file while reading header
by Matthias Saou 25 Mar '06

25 Mar '06

Hi, I'm using dovecot 1.0.0beta3 on a RHEL4 x86_64 server. I'm seeing this error each and every time a user checks his emails : Mar 15 18:19:34 s1 dovecot: pop3-login: Login: user=<user@domain>, method=PLAIN, rip=::ffff:195.x.x.x, lip=::ffff:195.x.x.x Mar 15 18:19:34s1 dovecot: pop3(user@domain): Corrupted transaction log file /home/vmail/domain/user/dovecot.index.log: unexpected end of file while reading header Mar 15 18:19:34 s1 dovecot: pop3(user@domain): Logout. top=0/0, retr=0/ del=0/2, size=1213 From my basic testing, this seemed harmless. But after putting this in production, it appears that when emails are retrieved, long ones always get truncated after a few kB, changing attachments into garbage :-( Has anyone seen this problem before? Any ideas what could be causing this? Matthias -- Clean custom Red Hat Linux rpm packages : http://freshrpms.net/ Fedora Core release 4 (Rawhide) - Linux kernel 2.6.15-1.2054_FC5 Load : 0.22 0.36 0.41

2 1

[Dovecot] Segfault when parsing configuration on x86_64
by Matthias Saou 25 Mar '06

25 Mar '06

Hi, Using the exact same build of 1.0.beta3, one i386 and the other x86_64, I get segfaults upon startup with the x86_64 version when using the exact same dovecot.conf file. Here is the error : # dovecot -F Unexpected eof found when reading file 'UNOPENED' (Errcode: 0) Segmentation fault (core dumped) And the backtrace (I don't have symbols for all libs, sorry) : (gdb) bt #0 i_stream_next_line (stream=0x52c3a8) at istream.c:182 #1 0x000000000040e345 in i_stream_read_next_line (stream=0x52c3a8) at istream.c:201 #2 0x000000000040aaa9 in settings_read (path=0x41798e "/etc/dovecot.conf", section=0x0, callback=0x409580 <parse_setting>, sect_callback=0x409a50 <parse_section>, context=0x7fbffff880) at settings.c:222 #3 0x000000000040a0e1 in master_settings_read ( path=0x41798e "/etc/dovecot.conf", nochecks=false) at master-settings.c:1159 #4 0x000000000040875a in main (argc=2, argv=0x7fbffffa18) at main.c:762 #5 0x0000003d4341c4bb in __libc_start_main () from /lib64/tls/libc.so.6 #6 0x000000000040357a in _start () #7 0x0000007fbffffa08 in ?? () #8 0x000000000000001c in ?? () #9 0x0000000000000002 in ?? () #10 0x0000007fbffffbf2 in ?? () #11 0x0000007fbffffbfa in ?? () #12 0x0000000000000000 in ?? () The really weird part is that I've managed to get my dovecot.conf in a state where the problem no longer happens, but simply adding a line with '#', or removing trailing spaces (normally harmless) on some config lines makes the error re-appear. My quick guess would be that something is wrong with the config file parser on 64bit archs... Actually, I've just made some more tests, and it is "partially" reproducible on i386. In this part of my configuration : auth default { mechanisms = plain passdb sql { args = /etc/dovecot-mysql.conf } userdb sql { args = /etc/dovecot-mysql.conf } } There is a trailing space on both "args = ..." lines. Well, if I remove them, I get this message with the i386 build. When I put them back, all is fine again. Mar 16 11:05:37 s1 dovecot: pop3(user@domain): Unexpected eof found when reading file 'UNOPENED' (Errcode: 0) (from /var/log/maillog, dovecot starts fine) Matthias -- Clean custom Red Hat Linux rpm packages : http://freshrpms.net/ Fedora Core release 4 (Rawhide) - Linux kernel 2.6.15-1.2054_FC5 Load : 0.78 0.61 0.49

2 1

[Dovecot] /etc/passwd authentication: ERR authentication failed
by Quoc Huy Trinh 25 Mar '06

25 Mar '06

Hi all, I am a newbie with dovecot. I have a problem with it's authentication. -I installed dovecot 1.0 beta3 at /usr/local/dovecot. -I want to use my linux system accounts with mail (authentication using /etc/passwd). -I have a user account: huytq with password: 123456 -dovecot is started ok. I used telnet to login: +OK Welcome LENSECAP HCM mail user huytq +OK pass 123456 -ERR Authentication failed. and this is the infolog file says: dovecot: Mar 18 22:26:50 Info: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.1.254 rip=192.168.1.253 resp=<hidden> dovecot: Mar 18 22:26:50 Info: auth(default): passwd(huytq, 192.168.1.253): password mismatch dovecot: Mar 18 22:26:51 Info: auth(default): client out: FAIL 1 user=huytq dovecot: Mar 18 22:27:50 Info: pop3-login: Disconnected: Inactivity: user=<huytq>, method=PLAIN, rip=192.168.1.253, lip=192.168.1.254 This is my conf file: ###################### dovecot.conf ################################# base_dir = /opt/dovecot/ protocols = pop3 listen = 192.168.1.254 ssl_disable = yes log_path = /usr/local/dovecot/log/log info_log_path = /usr/local/dovecot/log/infolog log_timestamp = "%b %d %H:%M:%S " disable_plaintext_auth = no auth_debug = yes auth_verbose = yes auth default { mechanisms = plain passdb passwd { } userdb passwd { } user = root } login_dir = /opt/dovecot/login login_chroot = yes login_user = dovecot login_greeting = Welcome QuocHuy mail server login_log_format_elements = user=<%u> homedir=%h method=%m rip=%r lip=%l %c login_log_format = %$: %s default_mail_env = maildir:/opt/mail_data/%u/Maildir mail_debug = yes protocol pop3 { login_executable = /usr/local/dovecot/libexec/dovecot/pop3-login mail_executable = /usr/local/dovecot/libexec/dovecot/pop3 pop3_uidl_format = %v.%u } ######################################################### Any opinion? Thanks in advance. -- Quoc Huy Trinh

2 1

[Dovecot] namespaces in 1.0beta3
by Mark Nelson 25 Mar '06

25 Mar '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello I'm currently running dovecot-1.0.alpha4-1 on my production system, dovecot-1.0.alpha4-1where I am making use of namespaces. I have downloaded 1.0-beta3 and have installed it on a test system. I have customised the configuration for local use, however when I inserted the namespace settings into my configuration file dovecot refuses to start claiming that there is a problem with the configuration file. Has the format of the namespace configuration changed? (Configuration fragment shown below) Mark. # Migration name spaces # # # default namespace namespace private { separator = / prefix = inbox = yes } # for backwards compatibility: namespace private { separator = / prefix = hidden = yes } namespace private { separator = / prefix = mail/ hidden = yes } namespace private { separator = / prefix = ~/mail/ hidden = yes } namespace private { separator = / prefix = ~%u/mail/ hidden = yes } - -- - ------------------------------------------------------------- Mark Nelson - Mark.Nelson(a)durham.ac.ukdovecot-1.0.alpha4-1 IPPP, Department of Physics, University of Durham, Science Laboratories, South Road, Durham, DH1 3LE Office: +44 (0)191 334 3811, Direct Dial: +44 (0)191 334 3653 PGP Key: http://www.ippp.dur.ac.uk/~mn/pgp_key.txt This mail is for the addressee only -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (GNU/Linux) Comment: Using GnuPG with Red Hat - http://enigmail.mozdev.org iD8DBQFEInzflzM++u0MgcERAmQeAJ9QvkUGcZkL7Spyh1dDt69m/CWXUACcCiq4 re7cEracjrZTyEGJ7qRyos0= =HLtc -----END PGP SIGNATURE-----

2 1

[Dovecot] Per-user "Seen" flags with shared namespace stored as maildir?
by Mark Lidstone 25 Mar '06

25 Mar '06

Hi all, I was wondering if the above was possible. I know that the "seen" flag is stored in the filename, but was wondering if anyone knew of a way to separate it out? I know this would strictly-speaking break maildir compatibility, but it would be extremely useful for shared folders. I've been given the task of replacing the (extremely heavily used) shared folders functionality of our Exchange server and have almost everything working. I have authentication working against AD, shared folders, per-user subscriptions, "mail enabled folder" functionality and seem to have sorted all the other permissions issues I've been having. Apart from a nice easy-to-use front end for changing folder permissions this is the last thing I can think of that I need to look into before I can show this to my boss. Any help would be greatly appreciated, Mark Lidstone IT Administrator BMT Nigel Gee & Associates Ltd Floors 1-3, Building 14, Shamrock Quay, William Street, Southampton SO14 5QL UK Tel: 023 8022 6655 Fax: 023 8022 8855 Visit Our Website: <http://www.ngal.co.uk> CONFIDENTIAL The information contained in this e-mail and any attachment is confidential. It is intended only for the named addressee(s). If you are not the named addressee please notify the sender immediately and do not disclose, copy or distribute the contents to any other person other than the intended addressee(s). VIRUSES The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While BMT Nigel Gee and Associates Ltd has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment.

2 1

[Dovecot] dovecot(last day cvs version) lost mail
by John Wong 25 Mar '06

25 Mar '06

i find a problem, after upgrade dovecot to last day cvs version, each folder only can see the first one arrived new mail, other new mail is lost i see this message in mail log: -------------------------------------------------------- Fixed index file mail/username/.foldername/dovecot.index: first_recent_uid_lowwater 146 -> 145 Corrupted index file mail/username/.foldername/dovecot.index: Duplicate header extension keywords -------------------------------------------------------- openbsd/i386, postfix-2.3x, dovecot(last day cvs version)

2 2

[Dovecot] Authentication without password
by Feraudet Cyril 25 Mar '06

25 Mar '06

Hi all, for one of my developpements, I need to be able to connect an IMAP server with a login but without password. (I use dovecot 1.0.beta3) For the userdb, I use "userdb static" : userdb static { args = uid=114 gid=114 home=/mydev/mail/%u } But I don't know how to allow IMAP connection by my application without password. I won't connect to a database, having a user/password file or something like this ... I think to use "passdb checkpassword" to call a fake authentication script .... Anyone have a better idea ? Thanks, Cyril Feraudet

5 6

[Dovecot] How Can I Add New Flags
by Sezai KARATOZ 25 Mar '06

25 Mar '06

Hi all, I am new in Dovecot. I wanna use Dovecot in the big mail system about 4 million active or passive users. We use recently Courier Imap, but search mails process is so slowly. I tried Dovecot that it is better then Courier so much. But I have a problem with integration Dovecot to my system. I am using some extra flags in mails to mark them from others. For example I use a private flag "M" to understand it that this mail come from us as newsletter. I make some changes in code, but unfortunately I could'nt add this flag to Dovecot correctly. Please help me it that how can add this flag. I use maildir type Thanks, Sezai

3 7

[Dovecot] Shared namespaces
by Mark Lidstone 25 Mar '06

25 Mar '06

Hi all, I'm trying to replace the "Public Folders" functionality in Exchange server. At first I thought it'd be something easily do-able with an IMAP server so I immediately thought of Dovecot. I setup what I though would work and things started to go a little screwy with subscription settings and the like. I started off by making a public maildir folder (in /home/public/Maildir) and setting the namespaces up in /usr/local/etc/dovecot.conf like this: namespace private { separator = / prefix = INBOX/ location = maildir:%h/Maildir inbox = yes } namespace public { separator = / prefix = Public/ location = maildir:/home/public/Maildir inbox = no hidden = no } The folder /home/public/Maildir has owner root:users and mode 770, and the file dovecot-shared in there has the same owner and mode 660. I logged with Thunderbird as user 1 and everything seems to work fine. However, when I logged in as user 2 I was getting all kinds of errors. On checking the permissions of /home/public/Maildir/subscriptions it was user1:user1 with mode 600. So then I thought "well, I'll change it to user1:users 660 and then everyone should be able to change it". I was very wrong. Whenever someone changed it, the ownership changed to userx:userx 600. Even when I tried setting the ownership to root:users and mode to 640, anyone could change it and set it to their own name (thus preventing anyone else from using it). To be perfectly honest, I'd ideally like to give people separate subscription settings anyway. I thought about symlinking the folders in, but that makes it a manual process to add new folders to everyone's maildirs. Can anyone please give me any pointers? Many thanks, Mark Lidstone IT Administrator BMT Nigel Gee & Associates Ltd Floors 1-3, Building 14, Shamrock Quay, William Street, Southampton SO14 5QL UK Tel: 023 8022 6655 Fax: 023 8022 8855 Visit Our Website: <http://www.ngal.co.uk> CONFIDENTIAL The information contained in this e-mail and any attachment is confidential. It is intended only for the named addressee(s). If you are not the named addressee please notify the sender immediately and do not disclose, copy or distribute the contents to any other person other than the intended addressee(s). VIRUSES The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While BMT Nigel Gee and Associates Ltd has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment.

3 2

[Dovecot] plugins
by Brian Wilson 25 Mar '06

25 Mar '06

I just signed up for the mailing list. I saw a thread a few days ago referencing dspam plugin and saying a page would be updated, but I cannot find any documentation on dovecot plugins anywhere except mentions in this archive... can someone direct me to the plugins page? I am trying to implement drac plugin. Compiles fine. Just need config data. Brian

3 4

[Dovecot] [PATCH] OpenSSL RNG initialization
by Vilmos Nebehaj 25 Mar '06

25 Mar '06

Hi, dovecot tries to use OpenSSL's PRNG to generate random numbers if there is no /dev/urandom found. Unfortunately, it is flawed in its present form, since the PRNG is not seeded before RAND_bytes() is called in src/lib/randgen.c (on systems which have /dev/urandom, OpenSSL automatically seeds its PRNG from the urandom device). Here's a patch to address this issue: it tries to seed the PRNG if there is no /dev/urandom present (which is likely the case if dovecot uses OpenSSL's RAND API). It can also be fetched from http://innoidea.com/~vili/dovecot_rng_init.diff -Vilmos Nebehaj Index: configure.in =================================================================== RCS file: /home/cvs/dovecot/configure.in,v retrieving revision 1.266 diff -u -r1.266 configure.in --- configure.in 28 Feb 2006 08:36:41 -0000 1.266 +++ configure.in 10 Mar 2006 17:15:01 -0000 @@ -358,7 +358,8 @@ AC_CHECK_FUNCS(fcntl flock lockf inet_aton sigaction getpagesize madvise \ strcasecmp stricmp vsnprintf vsyslog writev pread \ setrlimit setproctitle seteuid setreuid setegid setresgid \ - strtoull strtouq setpriority quotactl getmntent kqueue kevent) + strtoull strtouq setpriority quotactl getmntent kqueue kevent \ + getrusage) dnl * I/O loop function have_ioloop=no Index: src/lib/lib.h =================================================================== RCS file: /home/cvs/dovecot/src/lib/lib.h,v retrieving revision 1.20 diff -u -r1.20 lib.h --- src/lib/lib.h 25 Sep 2005 10:44:04 -0000 1.20 +++ src/lib/lib.h 10 Mar 2006 17:15:02 -0000 @@ -20,6 +20,13 @@ # include <stdint.h> /* C99 int types, we mostly need uintmax_t */ #endif +#ifdef HAVE_SYS_TIME_H +# include <sys/time.h> +#endif +#ifdef HAVE_SYS_TIME_H +# include <sys/resource.h> +#endif + #include "compat.h" #include "macros.h" #include "failures.h" Index: src/lib/randgen.c =================================================================== RCS file: /home/cvs/dovecot/src/lib/randgen.c,v retrieving revision 1.13 diff -u -r1.13 randgen.c --- src/lib/randgen.c 6 Jan 2005 19:08:19 -0000 1.13 +++ src/lib/randgen.c 10 Mar 2006 17:15:03 -0000 @@ -81,6 +81,42 @@ return buf; } +static void random_init_rng(void) +{ + int counter = 0; + struct timeval tv; +#ifdef HAVE_GETRUSAGE + struct rusage ru; +#endif + + /* + * If the RNG is already seeded, we can return + * immediately. + */ + if (RAND_status() == 1) + return; + + /* + * Else, try to seed it. Unfortunately we don't have + * /dev/urandom, so we can only use weak random sources. + */ + while (RAND_status() != 1) { + if (gettimeofday(&tv, NULL) < 0) + i_fatal("gettimeofday() failed: %m"); + RAND_add((const void *)&tv, sizeof(tv), + (double)sizeof(tv) / 2); +#ifdef HAVE_GETRUSAGE + if (getrusage(RUSAGE_SELF, &ru) < 0) + i_fatal("getrusage() failed: %m"); + RAND_add((const void *)&ru, sizeof(ru), + (double)sizeof(ru) / 2); +#endif + + if (counter++ > 100) + i_fatal("could not get enough entropy"); + } +} + void random_fill(void *buf, size_t size) { if (RAND_bytes(buf, size) != 1) @@ -91,6 +127,8 @@ { unsigned int seed; + random_init_rng(); + random_fill(&seed, sizeof(seed)); srand(seed); }

2 1

[Dovecot] Message Filenames
by Charlie Davis 25 Mar '06

25 Mar '06

Is there anyway to get a message's filename through the imap server? I've been developing a program for awhile and just switched to dovecot from courier. Courier had a file that for every line was like: <message uid> <message filename> Is there anway to get this information out of dovecot? -Charlie

3 2

[Dovecot] first crack at auto-trash plugin
by David Powers 25 Mar '06

25 Mar '06

I have written an alpha version of an auto trash plugin for dovecot. When compiled in any mail expunged from a non-Trash folder is moved to a folder named Trash. As of yet the folder is not created if it doesn't exist (the process fails before expunge). I would appreciate feedback of any sort. In addition, I am currently getting an error I haven't been able to puzzle out in the logs when it runs: Mar 21 15:22:01 david dovecot: imap(david(a)grayskies.net): Timeout leak: 0x807fad0 I see that it seems to relate to transactions somehow, but my few hours of playing with dovecot haven't given me the answer - so ideas/patches to the code would also be nice. You can grab it here: http://wrath.grayskies.net/tarballs/auto-trash.tar.gz -David

6 5

[Dovecot] Dovecot LDA + Fedora destribution = no go?
by Charlie Davis 25 Mar '06

25 Mar '06

Anyone know of a way to get the LDA to work on the fedora distribution available on yum? I'm a big fan of the whole yum-auto-updating thing but if this isn't possible, I'll go tarball. -Charlie

2 1

[Dovecot] Method of archiving mail?
by Stephen Allen 24 Mar '06

24 Mar '06

Hello I have a situation in which a number of users have 10,000+ messages in the maildir, going back a few years. I'm not a fan of this many files lying around so I'd like to set up some kind of archiving, but one that will allow user's access to the old mails should they wish to see them. I thought of a cron job trying to sift through messages pulling those what were older than x days, then writing some script to process a request from a user (date/time/from/to/subject/body text) and copy matching messages to a "query" folder in the maildir. However, a) I'm not good at this kind of thing, and b) I have a feeling it's already been done before. Can anyone point me in the right direction please... is their software around to do this already? Many thanks, Steve :)

3 3

[Dovecot] Imap Timeouts
by Neil Wilson 23 Mar '06

23 Mar '06

Hi guys, I've got a client running 1.0.beta3 on SuSe 9.3 Everything has been running perfectly since it was installed about 6 months ago, but lately they've had issues with email clients not being able to connect to the IMAP server, until they close their clients(Thunderbird & Outlook) and then re-open them. They have roughly 70 users on their network, so it sounds like it could be too many active sessions at once, but I've tried changing a few things in the config, and so far nothing has resolved this. Any help would be appreciated. Regards. Neil Wilson Powered by Linux, driven by passion! -- This email and all contents are subject to the following disclaimer: http://www.dcdata.co.za/emaildisclaimer.html

6 9

[Dovecot] Can Dovecot 'slurp' into the INBOX from a mail spool file?
by Daniel Watts 23 Mar '06

23 Mar '06

Hi guys, I have a system whereby I am forced to deal with mbox files of /var/spool/mail/user1 (mbox text file) /var/spool/mail/user2 (mbox text file) etc Their mail homes are maildir format in: /home/user1/Maildir/{cur,new,tmp} /home/user2/Maildir/{cur,new,tmp} etc I can set things up so that the mbox inbox is shown using namespaces: namespace private { separator = / prefix = location = maildir:/home/virtual/%d/home/%n/Maildir/ } namespace private { separator = / prefix = mail/ inbox = yes hidden = no location = mbox:/home/virtual/%d/home/%n/mail/:INBOX=/home/virtual/%d/var/spool/mail/%n } This gives a rather odd folder structure as follows: INBOX Sent Drafts Trash mail/ --- INBOX myfolder1 myfolder2 Both of those INBOXes are actually the same folder. I'd ideally like to hide the mbox namespace entirely so that the user does not see any mbox folders. UW IMAP, with it's mbx format, allows you to just drop in a file called INBOX in mbx format and it will 'slurp' the /var/spool/mail/usersmbox file into the mbx INBOX. Has/could Dovecot have a similar feature whereby you specify a spool folder which is then 'slurped' into the local maildir INBOX? Not sure if I'm being clear enough here - do let me know if not! Much thanks, Daniel

1 0

[Dovecot] spam filtering with amavis
by Bas van den Dikkenberg 23 Mar '06

23 Mar '06

I'm filtering that is being deliverd to postfix mail server with amavisd-new . I want spam with spam f level 1 - 8 to ad a tag any everything above to be delete is this posebol? If yes how? Met vriendelijk groet, Bas van Dikkenberg GISkit bv BFVD1-RIPE Tel: +3130-6340430 Fax: +3130-6342433 Prive Tel: +3130-6372769 Mob: +316-52384841

2 1

[Dovecot] dovecot customflags/keywords
by sezai.karatoz 23 Mar '06

23 Mar '06

4 3

[Dovecot] Losing messages
by Stian Jordet 23 Mar '06

23 Mar '06

Hi, I have been running dovecot cvs happily for.. well.. very, very long now. Don't remember when I switched from 0.99, but it was back in the test-days, long before the alpha's. Anyway, it seems to have been working very well all the time. But recently three of my clients have claimed to have lost mail when moving from Thunderbird. I even experienced it myself once. I'm using Evolution 99% of the time, and have never seen any problems with that - but that doesn't mean the problem only occurs with Thunderbird. When moving mail from one folder to another, everything seems fine, except that the mail isn't in any folder anymore. It _seems_ related to this: Mar 14 14:46:53 buick dovecot: imap(larsmj): Fixed index file /home/larsmj/Maildir/.Junk/dovecot.index: first_recent_uid_lowwater 40 -> 36 Mar 14 14:46:53 buick dovecot: imap(larsmj): Corrupted index file /home/larsmj/Maildir/.Junk/dovecot.index: Duplicate header extension keywords But I'm not sure. Either way I get these lines rather often for some users. What does it mean? Anyone seen anything like it? I really don't like the idea of losing clients mail... I hope someone can shed some light on this. Best regards, Stian

4 7