- dovecot - dovecot.org

RE: [Dovecot] Shared namespaces - solved
by Mark Lidstone 23 Mar '06

23 Mar '06

Hi Steffen, I'm using procmail as my LDA and postfix as my MTA. Also, in my case I need all email to any email address at my domain starting with "pr" then some numbers to go into these folders. The reason for this is I'm trying to setup an open-source replacement for our mail-enabled Exchange Public Folders at the moment (can you believe you can't search sub-folders in Exchange Public Folders?!). First I created a fake user with it's own group: adduser public_folders Next, I added all the relevant users to that group: usermod -G public_folders john_smith usermod -G public_folders jon_doe Next, in /home/public_user/.procmailrc I put the following: MAILDIR=/home/public_folders/Maildir # If any mail gets through to this account without having a project number address, # put it in an "Unfiled" folder. DEFAULT=$MAILDIR/.Unfiled/new * # This line just gets me the project number (also makes sure the preceding letters * # are uppercase - otherwise we could end up with separate folders for pr123, Pr123, * # pR123 and PR123. * PROJECT_NUM=`formail -xTo: | egrep -o [pP][rR][0-9]+ | tr '[a-z]' '[A-Z]'` # This is not absolutely necessary, but I prefer to keep logs so I can see where # emails have been stored if anything goes missing. LOGFILE=$MAILDIR/procmail.log # This UMASK setting is basically what you're looking for, Steffen. The mail files # on the disk are stored with mode 660. UMASK=007 # Because these are public folders receiving a lot of mail, I've put in a big message # ID cache. :0 Wh: msgid.log |formail -D 2097152 $MAILDIR/msgid.cache * # Notice that regexps in .procmailrc are case insensitive unless you specify otherwise * :0 H * * ^To: .*PR[0-9]+(a)mydomain\.tld * { * PROJECT_FOLDER=$MAILDIR/.Projects.${PROJECT_NUM} * * # Here I basically check if the folder exists. If not it's created with mode * # 770 - this is also important. * :0 Wic: * * ? test ! -d ${PROJECT_FOLDER} * # Make all the subfolders, or they will be made by dovecot when the first user * # tries to look in there messing up the permissions on that folder. * |mkdir -m 770 -p ${PROJECT_FOLDER}/new;\ * mkdir -m 770 ${PROJECT_FOLDER}/cur;\ * mkdir -m 770 ${PROJECT_FOLDER}/tmp * * # And here I finally store the email * :0: * ${PROJECT_FOLDER} * } Make sure the file has mode 0600 public_folders:public_folders or procmail will ignore it. Next, I had to set the following permission on the public_folders home folder: chmod 770 /home/public_folders Next, I put the following namespace into /usr/local/etc/dovecot.conf: namespace public { separator = / prefix = Public/ location = maildir:/home/public_folders/Maildir:INDEX=%h/Maildir/public_folders/indexes:CONTROL=%h/Maildir/public_folders/control inbox = no hidden = no } Next, I made sure the relevant folder structure existed with the right permissions (I cheated and did this as root): cd /home/public_folders mkdir -p Maildir/new cd Maildir mkdir cur mkdir tmp mkdir -p .Unfiled/new mkdir .Unfiled/cur mkdir .Unfiled/tmp for file in `find`; do chown public_folders:public_folders $file if [ -d $file ]; then chmod 770 $file else chmod 660 $file fi done *Next, I made a file called /etc/postfix/virtual.pcre with the following content: * * /^[pP][rR][0-9]+(a)mydomain\.tld/ public_folders@localhost * *And finally I put the following into /etc/postfix/main.cf: * * virtual_alias_maps = pcre:/etc/postfix/virtual.pcre, hash:/etc/postfix/virtual Then I restarted postfix and away I went. Now when someone sends an email to "pr123(a)mydomain.tld" it gets put into the relevant project folder under the "public _folders" maildir. If you don't need the automated project filing, ignore the lines with a * at the start. I hope someone finds this helpful. Many thanks, Mark Lidstone IT Administrator BMT Nigel Gee & Associates Ltd Floors 1-3, Building 14, Shamrock Quay, William Street, Southampton SO14 5QL UK Tel: 023 8022 6655 Fax: 023 8022 8855 Visit Our Website: <http://www.ngal.co.uk> -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org]On Behalf Of Steffen Kaiser Sent: 23 March 2006 08:29 To: dovecot(a)dovecot.org Subject: RE: [Dovecot] Shared namespaces - solved On Wed, 22 Mar 2006, Mark Lidstone wrote: How do you get the permissions of the mails the right way? Bye, -- Steffen Kaiser CONFIDENTIAL The information contained in this e-mail and any attachment is confidential. It is intended only for the named addressee(s). If you are not the named addressee please notify the sender immediately and do not disclose, copy or distribute the contents to any other person other than the intended addressee(s). VIRUSES The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While BMT Nigel Gee and Associates Ltd has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment.

2 1

RE: [Dovecot] Shared namespaces - solved
by Mark Lidstone 23 Mar '06

23 Mar '06

Heh heh heh. Whoops. I've spent a few hours digging around in the source and nearly posted a kludge of a patch I'd written to give a kind of half-baked attempt at getting group-usable subscriptions files. Then I came across something in the source........ In the config file, do something like the following: namespace public { separator = / prefix = Public/ location = maildir:/home/public/Maildir:CONTROL=%h/Maildir/Public inbox = no hidden = no } Notice the "CONTROL=" part of the location line. This tells dovecot where to store "control" files (of which the "subscriptions" file is one). As you can see I have told it to put the control files in each user's home space. This means not only are there going to be no permission problems, but each user can have separate subscriptions (because everyone is using their own "subscriptions" file). Of course I could also have set the CONTROL dir to be something like "/home/public/Maildir/control/%u" so they would all be stored in one place, but I prefer the idea of having it in the user's home folder. After searching the wiki I don't see the CONTROL option explained anywhere. Is there any chance someone could add that in somehow (a link from the SharedFolders page would be extremely useful also). Channing - you were very nearly right there. Many thanks everyone, Mark Lidstone IT Administrator BMT Nigel Gee & Associates Ltd Floors 1-3, Building 14, Shamrock Quay, William Street, Southampton SO14 5QL UK Tel: 023 8022 6655 Fax: 023 8022 8855 Visit Our Website: <http://www.ngal.co.uk> -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org]On Behalf Of Mark Lidstone Sent: 22 March 2006 08:50 To: Curtis Maloney Cc: dovecot(a)dovecot.org Subject: RE: [Dovecot] Shared namespaces Hi Curtis, Aye, I have read the wiki. I was pretty surprised this wasn't covered to be honest. Well, I've tried playing with the umask setting (thanks for the suggestion Channing) and changing the index locations (thanks Curtis), but no joy. I'm just about to start digging into the source to see if it's something I can sort out myself. Many thanks everyone, Mark Lidstone -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org]On Behalf Of Curtis Maloney Sent: 19 March 2006 22:51 To: Mark Lidstone Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Shared namespaces Mark Lidstone wrote: > Hi all, > > I logged with Thunderbird as user 1 and everything seems to work fine. However, when I logged in as user 2 I was getting all kinds of errors. On checking the permissions of /home/public/Maildir/subscriptions it was user1:user1 with mode 600. Just a thought, but have you tried setting the INDEX location in the default_mail_env ? I'm not certain, but I believe the subscriptions file is included in the INDEX set, and by setting its location elsewhere, you would prevent it from being inside the Maildir. This would prevent ownership hijacking, AND let everyone have their own subscriptions. I'm not certain of this, so either someone else can fill in the details, or you could check the source (and please report your findings:) > To be perfectly honest, I'd ideally like to give people separate subscription settings anyway. I thought about symlinking the folders in, but that makes it a manual process to add new folders to everyone's maildirs. Of course, I'm assuming you've read the Wiki (it looks like you have...) -- Curtis Maloney cmaloney(a)cardgate.net CONFIDENTIAL The information contained in this e-mail and any attachment is confidential. It is intended only for the named addressee(s). If you are not the named addressee please notify the sender immediately and do not disclose, copy or distribute the contents to any other person other than the intended addressee(s). VIRUSES The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While BMT Nigel Gee and Associates Ltd has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment. CONFIDENTIAL The information contained in this e-mail and any attachment is confidential. It is intended only for the named addressee(s). If you are not the named addressee please notify the sender immediately and do not disclose, copy or distribute the contents to any other person other than the intended addressee(s). VIRUSES The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While BMT Nigel Gee and Associates Ltd has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment.

2 1

[Dovecot] problem with dovecot lda
by Joakim Verona 23 Mar '06

23 Mar '06

I'm having trouble getting dovecot lda to work. I'm using dovecot b3, and a dovecot lda cvs checkout, according to http://wiki.dovecot.org/LDA I tr to use the .forward method: |"/usr/local/libexec/dovecot/deliver" I also tried this line: "|/usr/local/libexec/dovecot/deliver -c /etc/dovecot.conf -d joakim" I get this error in maillog: stat=unknown mailer error 80 I tried running deliver from commandline, and it manages to add lines to my inbox then. -- Joakim Verona www.verona.se

2 1

[Dovecot] Save sent mail on server
by Benjamin 22 Mar '06

22 Mar '06

Hi dovecot list users, currently we have some email accounts which get maintained by different people. If any of this users sends a mail, it is only saved on his local machine, but not on the imap server. But i'll need them to get saved on the mail server for backup purposes and that every user can see which mails have been sent through this account. Is this possible? Thanks in advance Regards Benjamin

3 2

[Dovecot] mail shown throught outlook, shows todays date
by bclark 22 Mar '06

22 Mar '06

Hi all I seem to be sitting with an interesting situation where by I need to copy mail from Exchange to dovecot (Maildir) I used a mixture of solution (Moz Thunderbird, fetchmail and outlook) to copy and test the mail. The interesting thing is, once I have some mail on the dovecot, the date displayed on Mozilla is correct, but the mail shown throught outlook, shows todays date (thats for all mail). I logged in squirrel mail, that too correctly displays the date. Almost seems as Outlook (office 2000) looks at the date / time stamp of the file it self as opposed to opening and reading the mail and reading the necassry tags. If anyone could help me understand this (is this a dovecot issue), I would really appreciate it. Kind Regards Brent Clark

2 1

[Dovecot] Tiny kqueue specific patch
by Václav Haisman 22 Mar '06

22 Mar '06

Hi, I have noticed from logs that (only handful of occurrences during whole week) sometimes there is some kind of unrecognized event on handle and the branch with i_panic() in ioloop-kqueue.c:io_loop_handler_run() catches it. This patch allows the i_panic() to print some more info about the nature of the unrecognized event so that I can find out what it is about. Since it is really rare event I ask anybody who sees Dovecot dying with "Unrecognized event" in logs to try this patch and report back with the output if it triggers again. The patch is against version 1.beta3. Vaclav Haisman --- ioloop-kqueue.c.orig Wed Mar 22 19:55:35 2006 +++ ioloop-kqueue.c Wed Mar 22 19:53:41 2006 @@ -204,7 +204,13 @@ void io_loop_handler_run(struct ioloop * (void *)io->callback); } } else - i_panic("Unrecognized event"); + i_panic("Unrecognized event: kevent {.ident = %u," + " .filter = 0x%04x," + " .flags = 0x%04x," + " .fflags = 0x%08x," + " .data = 0x%08x}", ctx->evbuf[i].ident, + ctx->evbuf[i].filter, ctx->evbuf[i].flags, + ctx->evbuf[i].fflags, ctx->evbuf[i].data); } }

1 0

[Dovecot] One dovecot, multiple domains
by Ben 22 Mar '06

22 Mar '06

Hey guys, I've got dovecot configured to work perfectly for virtual users across different domains. It's great. My problem is that, as far as I can tell, dovecot makes me use one SSL certificate across all my domains. That's not what I want. Is there a way I can get dovecot to use the cert for mail.foo.com when somebody is logging into a foo.com account, and the cert for mail.bar.com when somebody is logging into a bar.com account? Am I missing something obvious, or asking the impoosible?

7 11

[Dovecot] Using mbox INBOX with Maildirs?
by Mark Winslow 22 Mar '06

22 Mar '06

Thanks for everybody's tips on the mbox to maildirs converter. I was unaware that Maildirs was a common format not specific to dovecot, so I was searching using a dovecot keyword. I'm having this problem now with inboxes. I want to use maildirs, but my mail is delivered to an mbox. I can't seem to get dovecot to recognize the inbox location. Is something like: maildir:%h/Maildir:INBOX=/var/mail/%u impossible to use? What I'm trying to do is slowly merge people from mboxes to maildirs, so I have to use the passwd file per user maildirs settings with some sort of recognizeable inbox. I'm using sendmail as my mail server. Do I have to tell that to put the mail in the right inbox format? Thanks. __________________________________ Discover Yahoo! Find restaurants, movies, travel and more fun for the weekend. Check it out! http://discover.yahoo.com/weekend.html

3 2

[Dovecot] User data over Mysql
by Andrew Velikoredchanin 22 Mar '06

22 Mar '06

Hi, all! What I need set in dovecot config (dovecot-mysql.conf) for get home dir and mailbox file path from mysql DB? dovecot 0.99.11 Thanks.

1 0

[Dovecot] procmail 1
by Joakim Verona 22 Mar '06

22 Mar '06

-- Joakim Verona www.verona.se

1 0

RE: [Dovecot] Shared namespaces
by Mark Lidstone 22 Mar '06

22 Mar '06

Hi Curtis, Aye, I have read the wiki. I was pretty surprised this wasn't covered to be honest. Well, I've tried playing with the umask setting (thanks for the suggestion Channing) and changing the index locations (thanks Curtis), but no joy. I'm just about to start digging into the source to see if it's something I can sort out myself. Many thanks everyone, Mark Lidstone -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org]On Behalf Of Curtis Maloney Sent: 19 March 2006 22:51 To: Mark Lidstone Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Shared namespaces Mark Lidstone wrote: > Hi all, > > I logged with Thunderbird as user 1 and everything seems to work fine. However, when I logged in as user 2 I was getting all kinds of errors. On checking the permissions of /home/public/Maildir/subscriptions it was user1:user1 with mode 600. Just a thought, but have you tried setting the INDEX location in the default_mail_env ? I'm not certain, but I believe the subscriptions file is included in the INDEX set, and by setting its location elsewhere, you would prevent it from being inside the Maildir. This would prevent ownership hijacking, AND let everyone have their own subscriptions. I'm not certain of this, so either someone else can fill in the details, or you could check the source (and please report your findings:) > To be perfectly honest, I'd ideally like to give people separate subscription settings anyway. I thought about symlinking the folders in, but that makes it a manual process to add new folders to everyone's maildirs. Of course, I'm assuming you've read the Wiki (it looks like you have...) -- Curtis Maloney cmaloney(a)cardgate.net CONFIDENTIAL The information contained in this e-mail and any attachment is confidential. It is intended only for the named addressee(s). If you are not the named addressee please notify the sender immediately and do not disclose, copy or distribute the contents to any other person other than the intended addressee(s). VIRUSES The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While BMT Nigel Gee and Associates Ltd has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment.

1 0

[Dovecot] Dovecot 1.0 beta3 and SUBSCRIBE
by Bertrand Leboeuf 21 Mar '06

21 Mar '06

Using: default_mail_env = mbox:~/mail:INBOX=/var/mail/%u:INDEX=/var/indexes/%u I have a ~/mail/.subscriptions file (copied from .mailboxlist) Using: telnet localhost 143 a04 LSUB "" "*" => works fine, gives the list of subscribed folders a05 LIST "" * => works fine, gives the list of all folders a06 SUBSCRIBE "test" => deletes the ~/mail/.subscriptions file, it never gets recreated and LSUB gives an empty list after that. Any clues Bertrand Leboeuf

2 1

[Dovecot] Startup script
by Tom Sommer 21 Mar '06

21 Mar '06

Hi, Anyone have a nice startup script for /etc/init.d for Fedora, maybe it could be bundled? Regards -- Tom Sommer http://tomsommer.dk

3 3

[Dovecot] SquirrelMail 1.4.6 and Dovecot 1.0.beta3 Folders
by Bertrand Leboeuf 21 Mar '06

21 Mar '06

I migrated from UW IMAP, copied ~/.mailboxlist to ~/mail/.subscritions When I access SquirrelMail, is sees the folders on the left side. If I modifiy my folder subscription, they dissappear all but INBOX, and the .subscriptions file gets deleted. What am I missing. Thanks Bertrand Leboeuf

2 2

[Dovecot] compilation and installation of dspam-plugin
by Stefan Schmidt 21 Mar '06

21 Mar '06

hello johannes, i just discovered your wonderful plugin for dovecot. it was pretty much exactly what i was looking for, only that i didn't know that yet :) "Instead of moving mail into special folders, the user has two actions available: moving it out of the SPAM folder and moving it into the SPAM folder. The dovecot plugin watches these actions [...] and tells dspam that it made an error and needs to re-classify the message, depending on the action the user took. The user can now move the message directly into whatever folder she choses, and it all works. [...]" i think this is the most usable and intuitive approach to dspam-training i have seen so far and would love to integrate dspam with this plugin into my current setup (postfix + maildrop + dovecot). i have installed dovecot via package from the debian stable section [1] therefore i am currently using version 0.99.14 in my setup. despite this difference in version i gave your betacode [2] a try together with the source of the corresponding dovecot-version [3], hoping it wouldn't crash and burn when used with my earlier version of dovecot. but i didn't get to the point where i could actually testdrive it. i tried compiling the plugin with the instructions contained in the file, but the compilation didn't suceed. ---------------------------------------------------------------------- stefan@myserver:~/sources/dovecot-dspam-plugin/dovecot-1.0.beta3/plugin$ gcc -fPIC -shared -Wall -I../src/ -I../src/lib -I.. -I../src/lib-storage -I../src/lib-mail -I../src/lib-imap -I../src/imap/ -DHAVE_CONFIG_H spam_plugin.c -o spam_plugin.so In file included from ../src/imap/common.h:4, from spam_plugin.c:32: ../src/lib/lib.h:6:22: config.h: No such file or directory In file included from ../src/lib/lib.h:23, from ../src/imap/common.h:4, from spam_plugin.c:32: ../src/lib/compat.h:31:4: #error uoff_t size not set In file included from /usr/include/sys/socket.h:35, from ../src/lib/compat.h:80, from ../src/lib/lib.h:23, from ../src/imap/common.h:4, from spam_plugin.c:32: /usr/include/bits/socket.h:36: error: conflicting types for `socklen_t' ../src/lib/compat.h:51: error: previous declaration of `socklen_t' In file included from /usr/include/netinet/in.h:23, from ../src/lib/compat.h:81, from ../src/lib/lib.h:23, from ../src/imap/common.h:4, from spam_plugin.c:32: /usr/include/stdint.h:111: error: conflicting types for `uint_fast32_t' ../src/lib/compat.h:46: error: previous declaration of `uint_fast32_t' /usr/include/stdint.h:141: error: conflicting types for `uintmax_t' ../src/lib/compat.h:38: error: previous declaration of `uintmax_t' In file included from ../src/lib/lib.h:23, from ../src/imap/common.h:4, from spam_plugin.c:32: ../src/lib/compat.h:107: error: redefinition of `struct iovec' In file included from ../src/imap/commands.h:6, from ../src/imap/client.h:4, from ../src/imap/common.h:5, from spam_plugin.c:32: ../src/lib-storage/mail-storage.h:435: error: syntax error before "mail_get_virtual_size" ../src/lib-storage/mail-storage.h:435: warning: type defaults to `int' in declaration of `mail_get_virtual_size' ../src/lib-storage/mail-storage.h:435: warning: data definition has no type or storage class ../src/lib-storage/mail-storage.h:438: error: syntax error before "mail_get_physical_size" ../src/lib-storage/mail-storage.h:438: warning: type defaults to `int' in declaration of `mail_get_physical_size' ../src/lib-storage/mail-storage.h:438: warning: data definition has no type or storage class In file included from ../src/imap/commands.h:7, from ../src/imap/client.h:4, from ../src/imap/common.h:5, from spam_plugin.c:32: ../src/lib-imap/imap-parser.h:45: error: syntax error before "uoff_t" ../src/lib-imap/imap-parser.h:45: warning: no semicolon at end of struct or union ../src/lib-imap/imap-parser.h:45: warning: no semicolon at end of struct or union ../src/lib-imap/imap-parser.h:47: error: syntax error before '}' token ../src/lib-imap/imap-parser.h:47: warning: type defaults to `int' in declaration of `_data' ../src/lib-imap/imap-parser.h:47: warning: data definition has no type or storage class ../src/lib-imap/imap-parser.h:48: error: syntax error before '}' token ../src/lib-imap/imap-parser.h:72: error: field `args' has incomplete type ../src/lib-imap/imap-parser.h:125: error: syntax error before "_imap_arg_literal_size_error" ../src/lib-imap/imap-parser.h:125: warning: type defaults to `int' in declaration of `_imap_arg_literal_size_error' ../src/lib-imap/imap-parser.h:125: warning: data definition has no type or storage class ---------------------------------------------------------------------- just in case it matters: i currently have gcc 3.3.5 installed. greetings, stefan [1] http://packages.debian.org/stable/mail/dovecot-common [2] http://snipurl.com/nvol [3] http://www.dovecot.org/releases/dovecot-1.0.beta3.tar.gz

2 2

[Dovecot] [patch] support tpop3d-style UIDLs
by Ben Winslow 20 Mar '06

20 Mar '06

Hello, I've attached a patch that adds an additional expando to pop3_uidl_format. The additional expando (%M) expands to the md5sum of the filename (which is already available via %f.) This UIDL style is compatible with tpop3d when using Maildir. The patch is against dovecot 1.0 beta3, and I'd love to see it be merged into the official tree. Comments welcome. -- Ben Winslow <rain(a)bluecherry.net>

1 0

Re: [Dovecot] LDA Sieve debugging
by Luca Corti 20 Mar '06

20 Mar '06

On Mon, 2006-03-20 at 13:25 -0500, Duncan Hutty wrote: > try using "if header :contains" instead of address. I've tried that. Unfortunately it does not work. I've also removed the compiled version of the sieve script hoping that it was not recompiled after the changes. I noticed it is not recompiled even if permissions are correct on the file AND directory. I really do not understand what this could be. thanks -- Luca Corti PGP Key ID 1F38C091 BOFH excuse of the moment: nesting roaches shorted out the ether cable

1 0

Re: [Dovecot] VERY cool add-on request.
by Johannes Berg 20 Mar '06

20 Mar '06

On Sat, 2006-03-18 at 09:25 -0500, David A. Lee wrote: > You refered to a specific one for dspam. > Would it be easy to generalize ? Yes, shouldn't be too hard. But the plugin also looks at headers etc. which would be very hard to capture in a config file. Well, not impossible, but cumbersome. I'm not sure what you're after but say you want to be able to define folder actions in a config file. Let me draw up a hypothetical config file example with the logic of the dspam plugin. The syntax is sort of borrowed from Exim :) ----begin folder action config---- copy into "SPAM" fail condition !${defined:header:X-DSpam-Signature} fail message "Message doesn't have dspam signature!" run "dspam --signature ${header:X-DSpam-Signature} --is-spam" copy outof "SPAM" ignore to "Trash" fail condition !${defined:header:X-DSpam-Signature} fail message "Message doesn't have dspam signature!" run "dspam --signature ${header:X-DSpam-Signature} --not-spam" ----end folder action config---- I'm sure others can come up with examples where the config file has to be even more elaborate... I can imagine having a 'pipe' action instead of 'run' that would give the command the message on stdin for example. johannes

3 2

[Dovecot] VERY cool add-on request.
by Adam M. Dunn 20 Mar '06

20 Mar '06

I would like to have the ability to execute a command on a folder based on a user doing something like copying a message to that folder. This could be accomplished with a config file directive. For example, this would be EXTREMEMLY useful as a spam learning hook. Take a scenario where each user has their own spamassassin bayes database, and you want to give the users the ability to train their own database based on what they think is SPAM. It would be nice to give all the users a folder called Spam, and tell them to just copy/move mail into that folder, and spamassassin will automatically learn about it. If we had a configuration hook where you could execute on a copy/move, then I could tell Dovecot whenever a user puts a message into the Spam folder, execute 'sa-learn --spam --file %s' on that message. Sure we could just do an external script in a cron job to do it every hour or something, which I'll probably do in the mean time, but often users will just delete messsages after they copy into it. Doing it through IMAP means spamassassin will learn about it immediately. How cool would that be? It seems like an easy hook to implement. I would like to patch it myself for my own use, but I'm not very proficient in C. I saw someone on the net patched Courier to do the same thing so I know I'm not alone in wanting this. Anyone know how I could patch it? Can we add that to the feature request list? ~Adam

8 12

[Dovecot] mbox to maildir conversion
by Brian Wilson 20 Mar '06

20 Mar '06

Timo writes: > BTW. Nowadays Dovecot includes its own conversion tool also, which might > work better than mb2md. Usage is something like: > > src/plugin/convert-tool user /home/user mbox:/home/user/mail:INBOX=/var/mail/%u maildir:/home/user/Maildir I would RTFM but searching wiki.dovecot.org turns up nothing. Give me more hints and I will add a new wiki page. The feedback the command gives is $ ./convert-tool Fatal: Usage: <username> <home dir> <source mail env> <dest mail env> Why does the tool want a home directory? What does it look for there? I know you say the syntax is the same for other tools but I don't know it for them yet either. :-) Guessing at the syntax for the source, it looks like the first thing is the format of the source (mbox:) followed by a directory containing mbox format files. The INBOX portion specifies the location of the mbox that the MDA puts incoming messages into. I can see the variables defined in doc/variables.txt, got that already. Is it intended to run both directions? That is, if I swap the last two args is will it convert maildirs into mboxes? This comment from Stian seemed pertinent as well. > But there is at least one "bug" with this; you should convert .'s in > mbox names to underscore or something, else it looks weird. Other than > that, it seems to work fine :) ..but I am unsure what 'looks weird' means. Can you give an example? Why is this tool under 'plugins' when it appears to be a separate utility? My guess is that it was easier to put there due to the build environment. Maybe it should install to a bin or sbin location? Thanks for all you do, Brian

2 2

[Dovecot] auto move of purged mail to trash
by David Powers 17 Mar '06

17 Mar '06

I am moving a courier installation over to Dovecot and I am wondering if there is a way to set Dovecot to automatically move purged items to trash (under IMAP). Additionally, is there a way to automatically delete old items from a Trash folder? -David

1 1

Re: [Dovecot] Converting huge mbox to Dovecot mbox + indexes
by Bertrand Leboeuf 17 Mar '06

17 Mar '06

My mistake, good point. I thought that creating the indexes would take a long time, but after a couple of tests, I found that Dovecot is so fast that it beats UW IMAP even while creating the indexes and after that, it is just fast. Thanks Bertrand >From: "David A. Lee" <dlee(a)calldei.com> > >I'm curious why this is an issue ? Wont dovecot make the indexes on first >use of the mbox if it finds no indexes ? > > > >> >From: Johannes Berg <johannes(a)sipsolutions.net> >>> >>>On Thu, 2006-03-16 at 15:30 -0500, Bertrand Leboeuf wrote: >>> >>>> I have ~500 users, some with HUGE mbox (500MB-1GB), >>>> is there a script to create the Dovecot indexes at night >>>> to help speed up the migration process. >>> >>>If you use the dovecot converter then indexes will be built during the >>>conversion. >>> >>>johannes >> >> Good, can I use convert-tool to do: mbox -> mbox + indexes >> >> I have not tested the maildir configs yet and I will >> have to deal with the number of files and their placement. >> >> Bertrand >> >>

2 1

Re: [Dovecot] Converting huge mbox to Dovecot mbox + indexes
by Bertrand Leboeuf 17 Mar '06

17 Mar '06

>From: Johannes Berg <johannes(a)sipsolutions.net> > >On Thu, 2006-03-16 at 15:30 -0500, Bertrand Leboeuf wrote: > >> I have ~500 users, some with HUGE mbox (500MB-1GB), >> is there a script to create the Dovecot indexes at night >> to help speed up the migration process. > >If you use the dovecot converter then indexes will be built during the >conversion. > >johannes Good, can I use convert-tool to do: mbox -> mbox + indexes I have not tested the maildir configs yet and I will have to deal with the number of files and their placement. Bertrand

2 1

[Dovecot] mbox to maildir: what about INBOX
by Bertrand Leboeuf 17 Mar '06

17 Mar '06

I migrated from UW IMAP/Qpopper to Dovecot using: # indexes on /var/indexes is faster: local, not NFS mouted default_mail_env = mbox:~/mail:INBOX=/var/mail/%u:INDEX=/var/indexes/%u # Qpopper pop3_reuse_xuidl = yes The new mail is sent to in /var/mail/%u in mbox format How can I migrate some users to maildir and have them receive their emails either in POP3 or IMAP. (lots of big files to convert) How does new email get spooled in the right INBOX (POP3/IMAP) ? Thanks. Bertrand Leboeuf leboeuf(a)emt.inrs.ca

1 0

[Dovecot] LDA Sieve debugging
by Luca Corti 17 Mar '06

17 Mar '06

Hello all, I've installed and setup the LDA with postfix. I'm trying out Sieve support, and wrote the following global script: require "fileinto"; if address :contains "To" "luca(a)mydomain.tld" { fileinto "Spam"; } and tried to send an email to that address. The sieve script seems to be processed and sieve-global.scriptc is compiled, but the message is not filed in the correct folder. Is there a way to debug the script execution? thanks -- Luca Corti PGP Key ID 1F38C091 BOFH excuse of the moment: Internet exceeded Luser level, please wait until a luser logs off before attempting to log back on.

1 0

[Dovecot] PAM authentification problem
by Vladislav Kyjasko 17 Mar '06

17 Mar '06

Hi everybody, we try to migrate our IMAP service from uw-imap to dovecot because of horrible server slowdown when a lot of people poking in theirs huge imap folders. So, I try to run testing instance of dovecot on different imap port (12143) I have trouble with authentication by PAM module of MIT Kerberos. It successfuly works for authentificate users of wu-imap but not for dovecot. I see in dovecot.log messages like that : Info: Dovecot v1.0.beta3 starting up Info: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=10.0.0.154 rip=10.0.0.148 Info: auth(default): client out: CONT 1 Info: auth(default): client in: CONT 1 AGtDNLamUjvADNLamUjQRsbw== Error: auth(default): pam(kyyashko,10.0.0.148): Child process died Info: auth(default): shadow(kyyashko,10.0.0.148): invalid password field Error: auth(default): PAM: Child 6748 died with signal 11 Info: auth(default): client out: FAIL 1 user=kyyashko temp Almost all users are in kerberos DB and has in local shadow field "*KRB*" instead of encrypted password. So, line "shadow ... invalid password field" is OK (when I made a local password in shadow the login was success) My dovecot.conf looks like: sl_disable = yes protocol imap { listen = *:12143 } auth_default_realm = FZU.CZ auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root } original /etc/pam.d/dovecot I introdused by lines auth sufficient pam_krb5.so auth required pam_unix2.so use_first_pass nullok or tryed to substitute whole file pam.d/dovecot by actualy working one of imap: #%PAM-1.0 auth sufficient pam_krb5.so auth required pam_unix2.so use_first_pass nullok auth required pam_unix2.so account required pam_unix2.so but similary fruitless. Which direction I have to dig? P.S. Dovecot was built from dovecot-1.0.beta3-6.src.rpm on SuSE 9.0 with the same result like from dovecot-1.0.beta3.tar.bz2 :(

2 3

[Dovecot] Converting huge mbox to Dovecot mbox + indexes
by Bertrand Leboeuf 17 Mar '06

17 Mar '06

Migrating from UW IMAP/Qpopper mbox to Dovecot mbox. I have ~500 users, some with HUGE mbox (500MB-1GB), is there a script to create the Dovecot indexes at night to help speed up the migration process. Any idea. Thanks Bertrand Leboeuf leboeuf(a)emt.inrs.ca

2 1

[Dovecot] Install/configure on FC4 with maildir and mysql
by Netlink Tech 17 Mar '06

17 Mar '06

Hello, I have a FC4 x64 server that I am configuring/testing. It had dovecot 0.99 loaded after I did a yum update. That worked great with mbox, the passwd file, and test users in /home/users/username. I would like to be able to authenticate virtual users by 'username(a)domain.com' and have them be able to use squirrelmail or Outlook/Outlook Express to access their email. Users have no reason to have a login (shell) account on this machine. I also would like to use the maildir format for performance. I also have hundreds of users currently on a RH9 mail server using qpopper in mbox format, hashed mail spool. Questions: 1)Is a mysql database the best way to support "user(a)domain.com" email users? (they don't have any reason for a shell account on this machine) 2)What version of dovecot should I be using? I prefer RPMs and at http://www.dovecot.org/list/dovecot/2006-February/011467.html I found http://fedora.ivazquez.net/yum/4/x86_64/RPMS.alternatives/dovecot-1.0-0.iva… I installed this and then configured procmail for maildir delivery. I configured dovecot-sql.conf for mysql driver...but the mysql driver does not appear to be compiled in this rpm. 3)Anyone have any general tips on how to configure such a beast? Thanks, Curt

5 8

Re: [Dovecot] what are those .nfsXXXXX files with mbox ?
by Bertrand Leboeuf 16 Mar '06

16 Mar '06

Thanks, Dovecot seems to create a lot because of the indexes, but they dissapear with the cron. -Bert >From: Jeff Ballard <ballard(a)engr.wisc.edu> > > >There should be a cron job on the server that deletes those > >>From /var/spool/cron/crontabs/root: > >15 3 * * 0 /usr/lib/fs/nfs/nfsfind > >Looking at /usr/lib/fs/nfs/nfsfind: ># less /usr/lib/fs/nfs/nfsfind >#!/bin/sh ># Copyright (c) 1993 by Sun Microsystems, Inc. > >#ident "@(#)nfsfind.sh 1.7 00/07/17 SMI" ># ># Check shared NFS filesystems for .nfs* files that ># are more than a week old. ># ># These files are created by NFS clients when an open file ># is removed. To preserve some semblance of Unix semantics ># the client renames the file to a unique name so that the ># file appears to have been removed from the directory, but ># is still usable by the process that has the file open. >[snip] > >-Jeff > >-- >-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- >Jeff Ballard <ballard(a)engr.wisc.edu> 608-265-5090 >Unix Systems Manager, Computer-Aided Engineering Center >

1 0

Re: [Dovecot] what are those .nfsXXXXX files with mbox ?
by Bertrand Leboeuf 16 Mar '06

16 Mar '06

Thanks, there just seems to be a lot of them >From: tblader <tblader(a)flambeau.com> > >Those are files NFS creates when the file it had locked/open/writing to was >nuked or moved before it had a chance to complete. IIRC, they cannot be >removed until the NFS daemon has given up on them [1]. > >[1] - from experience, not TFM > > > >leboeuf(a)emt.inrs.ca wrote: >> On Solaris 9, using: >> >> default_mail_env = mbox:~/mail:INBOX=/var/mail/%u >> >> Here is a listing of ~/mail >> >> with UW IMAP: >> >> .: >> total 8 >> drwx------ 2 testu3 sysadmin 512 Mar 14 14:40 . >> drwxr-xr-x 4 testu3 sysadmin 512 Mar 14 14:40 .. >> -rw------- 1 testu3 sysadmin 496 Mar 14 14:40 Drafts >> -rw------- 1 testu3 sysadmin 496 Mar 14 14:40 Sent Items >> >> with Dovecot: >> >> .: >> total 16 >> drwx------ 3 testu3 sysadmin 512 Mar 14 14:52 . >> drwxr-xr-x 4 testu3 sysadmin 512 Mar 14 14:40 .. >> drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 .imap >> -rw------- 1 testu3 sysadmin 6 Mar 14 14:52 .nfsAEBA5 >> -rw------- 1 testu3 sysadmin 11 Mar 14 14:52 .nfsCEBA5 >> -rw------- 1 testu3 sysadmin 7 Mar 14 14:52 .nfsEEBA5 >> -rw------- 1 testu3 sysadmin 496 Mar 14 14:40 Drafts >> -rw------- 1 testu3 sysadmin 496 Mar 14 14:40 Sent Items >> >> ./.imap: >> total 10 >> drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 . >> drwx------ 3 testu3 sysadmin 512 Mar 14 14:52 .. >> drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 Drafts >> drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 INBOX >> drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 Sent Items >> >> ./.imap/Drafts: >> total 30 >> drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 . >> drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 .. >> -rw------- 1 testu3 sysadmin 112 Mar 14 14:53 .nfs0FBA5 >> -rw------- 1 testu3 sysadmin 10272 Mar 14 14:52 .nfs2FBA5 >> -rw------- 1 testu3 sysadmin 144 Mar 14 14:53 dovecot.index >> >> ./.imap/INBOX: >> total 66 >> drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 . >> drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 .. >> -rw------- 1 testu3 sysadmin 216 Mar 14 14:53 .nfs00CA5 >> -rw------- 1 testu3 sysadmin 17408 Mar 14 14:53 .nfs20CA5 >> -rw------- 1 testu3 sysadmin 360 Mar 14 14:52 .nfs5FBA5 >> -rw------- 1 testu3 sysadmin 10272 Mar 14 14:52 .nfs8FBA5 >> -rw------- 1 testu3 sysadmin 360 Mar 14 14:53 dovecot.index >> >> ./.imap/Sent Items: >> total 54 >> drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 . >> drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 .. >> -rw------- 1 testu3 sysadmin 88 Mar 14 14:53 .nfs40CA5 >> -rw------- 1 testu3 sysadmin 10272 Mar 14 14:53 .nfs60CA5 >> -rw------- 1 testu3 sysadmin 88 Mar 14 14:52 .nfsBFBA5 >> -rw------- 1 testu3 sysadmin 10272 Mar 14 14:52 .nfsDFBA5 >> -rw------- 1 testu3 sysadmin 144 Mar 14 14:53 dovecot.index >> >> what are the .nfsXXXXX files for ? >> >> Thanks >> >> Bertrand Leboeuf >> leboeuf(a)emt.inrs.ca >> >> > >-- > >Flambeau Inc. Technology Center >Email : tblader(a)flambeau.com >Keyserver: http://pgp.mit.edu KeyID: 0x00E9EC2C >? http://www.google.com/search?q=what+is+gnupg

3 2

[Dovecot] virtual users
by tblader 16 Mar '06

16 Mar '06

Hello All. I've been reading the virtual user howto but cant get the login working. dovecot.conf is below [0] if anyone can offer some pointers. I'm confused about the format of /etc/imap.passwd [1] also. Does the "pass" word in the example need to be plaintext, or the MD5 string from do. Also, what is the significance of "{plain}"? If there are docs I've missed, please RTFM with a link. Thanks [0] - dovecot.conf ----------------------------------- protocols = imap imaps mail_debug = no protocol imap { } protocol pop3 { } auth_verbose = no auth_debug = no auth_debug_passwords = no auth default { mechanisms = plain passdb passwd-file { args = /etc/imap.passwd } userdb passwd { } userdb passwd-file { args = /etc/imap.passwd } user = root } plugin { } [1] ------------------------ testuser:{plain}pass:65500:65500::/var/spool/mail/testuser

1 1

Re: [Dovecot] Migrating UW-IMAP to Dovecot on Solaris 9
by Bertrand Leboeuf 16 Mar '06

16 Mar '06

Thanks, Found out that we were using Qpopper X-UIDL so I am using pop3_reuse_xuidl = yes >From: lenny(a)edpausa.com > >if you're using wu-imap, you'll need this for pop to work. > >pop3_uidl_format = %08Xv%08Xu > >and if your site is relatively big, dovecot may run out of file >descriptors, you may need to use this. > >/usr/bin/plimit -n 8192,8192 `cat /usr/local/var/run/dovecot/master.pid` > > >and watch the logs :) > > >> In the process of migrating to Dovecot 1.0beta3, any tips or >> step-by-step instructions that might relate to Solaris 9. >> >> Thanks >> >> Bertrand Leboeuf >> leboeuf(a)emt.inrs.ca >> >> >

1 0

[Dovecot] Help: Limit x minutes for POP3 Access
by Adnae Mac Uthidir 16 Mar '06

16 Mar '06

Hi, IŽm looking for a solution to limit the pop3 access for a time. I have the idea that all users should be allowed an 5 minute access to the pop3 but I canŽt find a solution for that. best regards ans thx for your help Sascha Wolf

1 0

Re: [Dovecot] Imap crashes when trying to move messages
by ambroz.bizjak＠guest.arnes.si 16 Mar '06

16 Mar '06

> On 2006-03-15 23:39:40 +0100, ambroz.bizjak(a)guest.arnes.si wrote: > > > The imap process crashes when SquirrelMail wants to move a message to > > > another folder. I have run imap in gdb and talked to it the same way > > > SquirrelMail does and got a backtrace. > > > > > > I am using Dovecot beta3. I am using it in combination with XMail, > > > which has maildir databases. > > > My system is Gentoo Linux on x86. > > > The same version of Dovecot works great for me on amd64 with exactly > > > the same config. > > > > > > > I got more info. The mailboxes I was using were directly copied from > > another server which was also using Dovecot. After I deleted all files > > named *dovecot* in the maildirs, the imap process no nolger crashes. > > can you ask which dovecot version they had running on the other server? > looks like some broken index files. It's my server and it's still running and working properly. Dovecot version is (as on the newer server) beta3, but the first Dovecot running was beta2 I think. Imap works properly on that server. Anyway Dovecot shouldn't crash ever if the index files are broken!

1 0

[Dovecot] Shared Folders Problem. Bug?
by Adam M. Dunn 16 Mar '06

16 Mar '06

I'm trying to get shared folders to work, and I've noticed a few issues. I created a private and public namespace, the private one with autodetection for Maildir or Mbox, and the public one for a public folder. Something like this: namespace private { separator = / inbox = yes prefix = location = } namespace public { separator = / prefix = Public/ location = maildir:/var/mail/public } My plan is to eventually setup a public area for users to drop Spam and Ham into for my spam bayesan filter. The problem is the Wiki says if you drop a file in the public area called 'dovecot-shared' with the same permissions and ownership, that any new files dovecot creates there will use those same attributes. This does not seem to be the case. I created a Maildir folder identical to the one on the Wiki, named everything 'dovecot:dovecot' since my dovecot server will be running as that user, as well as the 'dovecot-shared' file. I get permission denied errors in syslog when I try to access it via an IMAP client. The only way I can make it work is ignore the dovecot-share file and put all users in a common unix group and make the Public folder group 'rwx'. Also, I would like to be able to make the Public folder writable, but not readable. It seems if I take the read bit away, my IMAP clients complain. Does anyone know how to make that work? One thing about the namespaces while I'm at it. I had to put my private namespace first followed by the public one. If I reversed them, all the subfolders except the inbox in my mail directories disappear from the client. Is that a bug too? Thanks, Adam

1 0

[Dovecot] Problems with Oulook Clients
by Patrick Carney 16 Mar '06

16 Mar '06

Hello all. I have problems with clients running Outlook 2003 that keep getting IMAP server timeout errors, "mailbox in an inconsistant state" Are there any mods to be made to the config file that could eliminate this? It happens about ever 10minutes. Here is what our previous Sys Admin sent me on our setup. dovecot is the IMAP server that allows clients to connect and get to their mailboxes. Postfix is that part of the mail system that moves messages around, from one server to another and puts them in the appropriate mailboxes. Thanks Patrick

2 3

Re: [Dovecot] Imap crashes when trying to move messages
by ambroz.bizjak＠guest.arnes.si 15 Mar '06

15 Mar '06

> The imap process crashes when SquirrelMail wants to move a message to > another folder. I have run imap in gdb and talked to it the same way > SquirrelMail does and got a backtrace. > > I am using Dovecot beta3. I am using it in combination with XMail, > which has maildir databases. > My system is Gentoo Linux on x86. > The same version of Dovecot works great for me on amd64 with exactly > the same config. > I got more info. The mailboxes I was using were directly copied from another server which was also using Dovecot. After I deleted all files named *dovecot* in the maildirs, the imap process no nolger crashes.

2 1

[Dovecot] migrating POP3 from UW IMAP: X-UIDL and X-UID
by Bertrand Leboeuf 15 Mar '06

15 Mar '06

With a INBOX mbox created by UW IMAP the messages in INBOX mbox contains the X-UIDL field When I use Dovecot POP3 with pop3_uidl_format = %08Xv%08Xu on the first run, X-UID is inserted, but all messages are downloaded again. What am I missing, I don't want the clients to download the read messages again. Thanks Bertrand Leboeuf leboeuf(a)emt.inrs.ca

1 0

[Dovecot] Imap crashes when trying to move messages
by ambroz.bizjak＠guest.arnes.si 15 Mar '06

15 Mar '06

The imap process crashes when SquirrelMail wants to move a message to another folder. I have run imap in gdb and talked to it the same way SquirrelMail does and got a backtrace. I am using Dovecot beta3. I am using it in combination with XMail, which has maildir databases. My system is Gentoo Linux on x86. The same version of Dovecot works great for me on amd64 with exactly the same config. Here is what I gave done: janez ~ # MAIL=maildir:/chroot/xmail/var/MailRoot/domains/b4ever.net/ambro/Maildir gdb /usr/libexec/dovecot/imap GNU gdb 6.4 Copyright 2005 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i586-pc-linux-gnu"...(no debugging symbols found) Using host libthread_db library "/lib/libthread_db.so.1". (gdb) r Starting program: /usr/libexec/dovecot/imap (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) (no debugging symbols found) * PREAUTH [CAPABILITY IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS] Logged in as root A002 SELECT "INBOX" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 11 EXISTS * 0 RECENT * OK [UIDVALIDITY 1138230965] UIDs valid * OK [UIDNEXT 32] Predicted next UID A002 OK [READ-WRITE] Select completed. A003 EXPUNGE A003 OK Expunge completed. A004 LIST "" "INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.Trash" A004 OK List completed. A005 COPY 11 "INBOX.Trash" imap(root): Warning: Growing pool 'uidlist record_pool' with: 1024 imap(root): Panic: file mail-cache-transaction.c: line 709 (mail_cache_add): assertion failed: (fixed_size == (unsigned int)-1 || fixed_size == data_size) Program received signal SIGABRT, Aborted. 0xb7ef0ec1 in kill () from /lib/libc.so.6 (gdb) bt full #0 0xb7ef0ec1 in kill () from /lib/libc.so.6 No symbol table info available. #1 0xb7ef0c89 in raise () from /lib/libc.so.6 No symbol table info available. #2 0xb7ef1ed8 in abort () from /lib/libc.so.6 No symbol table info available. #3 0x080a5363 in data_stack_deinit () No symbol table info available. #4 0x080a54f4 in i_panic () No symbol table info available. #5 0x08086caf in mail_cache_add () No symbol table info available. #6 0x0807e74a in index_mail_cache_add () No symbol table info available. #7 0x0806896b in maildir_mailbox_list_next () No symbol table info available. #8 0x0809872b in mail_storage_copy () No symbol table info available. #9 0x080672da in maildir_copy () No symbol table info available. #10 0x08056bf1 in cmd_copy () No symbol table info available. #11 0x0805a93b in _client_input () No symbol table info available. #12 0x080ab313 in io_loop_handler_run () No symbol table info available. #13 0x080aa82e in io_loop_run () No symbol table info available. #14 0x08061997 in main () No symbol table info available. (gdb)

1 0

[Dovecot] Strange dovecot-uidlist behavior on maildir conversion
by allen petersen 15 Mar '06

15 Mar '06

Hi. So I just moved my email over from mbox to maildir. For the most part the conversion went fine, but I had a bit of an odd thing happen when I accessed my mail through dovecot. It seems that when I ran mb2md to convert my mailboxes from mbox to maildir, I got a lot of messages created that look like 1142356176.000000.mbox:2,RS 1142356176.000421.mbox:2,S 1142356176.000001.mbox:2,S 1142356176.000422.mbox:2,RS 1142356176.000002.mbox:2,RS 1142356176.000423.mbox:2,S 1142356176.000003.mbox:2,RS 1142356176.000424.mbox:2,S and so forth. Now, that really should be fine, that I can tell; each message has the same timestamp and a different, sequential delivery identifier. However, for some reason when dovecot accessed this directory, it created UIDs for these messages like so: (from dovecot-uidlist) 1 1142362834 915 1 1142356176.000488.mbox 2 1142356176.000207.mbox 3 1142356176.000425.mbox 4 1142356176.000117.mbox 5 1142356176.000398.mbox 6 1142356176.000335.mbox I have no idea where this order came from, but it's clearly not the order that I would have expected. I would expect that dovecot would sort these messages by timestamp, followed by delivery identifier. Instead, it put them in a seemingly random order. And, of course, my email client by default shows messages in the order that it gets them from the server, so now when I look at my email all of my old messages are shuffled until I do an explicit sort by date. Any idea why this is happening? Is there some reasoning behind this, or is it just a bug? I looked through the archives a bit, but didn't find a mention of anyone else with this particular problem. I suppose I could just create the initial uid lists by hand and put them in the correct order, but that really doesn't seem like the correct solution. Or I could actually dig through the source and find out exactly what it's doing, but, well, I figure that asking the list first is easier. For reference, I'm running dovecot 0.99.14-1 on debian sarge. I though that I was doing a good job by reproducing this on the newer version my ubuntu desktop, but it turns out that it's running the same version. :) -allen

1 0

[Dovecot] what are those .nfsXXXXX files with mbox ?
by leboeuf＠emt.inrs.ca 14 Mar '06

14 Mar '06

On Solaris 9, using: default_mail_env = mbox:~/mail:INBOX=/var/mail/%u Here is a listing of ~/mail with UW IMAP: .: total 8 drwx------ 2 testu3 sysadmin 512 Mar 14 14:40 . drwxr-xr-x 4 testu3 sysadmin 512 Mar 14 14:40 .. -rw------- 1 testu3 sysadmin 496 Mar 14 14:40 Drafts -rw------- 1 testu3 sysadmin 496 Mar 14 14:40 Sent Items with Dovecot: .: total 16 drwx------ 3 testu3 sysadmin 512 Mar 14 14:52 . drwxr-xr-x 4 testu3 sysadmin 512 Mar 14 14:40 .. drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 .imap -rw------- 1 testu3 sysadmin 6 Mar 14 14:52 .nfsAEBA5 -rw------- 1 testu3 sysadmin 11 Mar 14 14:52 .nfsCEBA5 -rw------- 1 testu3 sysadmin 7 Mar 14 14:52 .nfsEEBA5 -rw------- 1 testu3 sysadmin 496 Mar 14 14:40 Drafts -rw------- 1 testu3 sysadmin 496 Mar 14 14:40 Sent Items ./.imap: total 10 drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 . drwx------ 3 testu3 sysadmin 512 Mar 14 14:52 .. drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 Drafts drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 INBOX drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 Sent Items ./.imap/Drafts: total 30 drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 . drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 .. -rw------- 1 testu3 sysadmin 112 Mar 14 14:53 .nfs0FBA5 -rw------- 1 testu3 sysadmin 10272 Mar 14 14:52 .nfs2FBA5 -rw------- 1 testu3 sysadmin 144 Mar 14 14:53 dovecot.index ./.imap/INBOX: total 66 drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 . drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 .. -rw------- 1 testu3 sysadmin 216 Mar 14 14:53 .nfs00CA5 -rw------- 1 testu3 sysadmin 17408 Mar 14 14:53 .nfs20CA5 -rw------- 1 testu3 sysadmin 360 Mar 14 14:52 .nfs5FBA5 -rw------- 1 testu3 sysadmin 10272 Mar 14 14:52 .nfs8FBA5 -rw------- 1 testu3 sysadmin 360 Mar 14 14:53 dovecot.index ./.imap/Sent Items: total 54 drwx------ 2 testu3 sysadmin 512 Mar 14 14:53 . drwx------ 5 testu3 sysadmin 512 Mar 14 14:52 .. -rw------- 1 testu3 sysadmin 88 Mar 14 14:53 .nfs40CA5 -rw------- 1 testu3 sysadmin 10272 Mar 14 14:53 .nfs60CA5 -rw------- 1 testu3 sysadmin 88 Mar 14 14:52 .nfsBFBA5 -rw------- 1 testu3 sysadmin 10272 Mar 14 14:52 .nfsDFBA5 -rw------- 1 testu3 sysadmin 144 Mar 14 14:53 dovecot.index what are the .nfsXXXXX files for ? Thanks Bertrand Leboeuf leboeuf(a)emt.inrs.ca

2 1

[Dovecot] Rootless configuration
by James Davis 14 Mar '06

14 Mar '06

I'm trying to setup a rootless configuration so I can better manage the e-mail that comes to the mailbox of a unix account I have. I've successfully compiled Dovecot and followed the instructions for a rootless configuration, tweaking my config until Dovecot returns no errors. However I've got to a stage where upon running ~/..../sbin/dovecot it just quits with no server running and no errors. Any ideas? My rather small and basic configuration file is as follows... # Base directory where to store runtime data. base_dir = /home/jamesd/imap/dovecot/run/ # Protocols we want to be serving: protocols = imap listen = * ssl_disable = yes log_path = /home/jamesd/imap/dovecot/logs/ info_log_path = /home/jamesd/imap/dovecot/logs/ ## Login processes login_dir = /home/jamesd/imap/dovecot/run/login login_chroot = no login_user = jamesd ## IMAP specific settings protocol imap { listen = *:10143 } ## Authentication processes auth default { mechanisms = plain passdb passwd-file { args = /home/jamesd/imap/dovecot/etc/passwd } user = jamesd } Many thanks, James -- http://www.freecharity.org.uk/ - Free hosting for charities http://jamesd.ukgeeks.co.uk/

2 2

[Dovecot] Shared maildir through namespace help...
by Brice Figureau 14 Mar '06

14 Mar '06

Hi, I'm a happy user of dovecot since the 0.99.x days, and recently switched my user base to 1.0b2. Now, to the point, I got a request (from marketing) to share a lot of maildirs between two (and possibly more) accounts. Those two accounts have differents uid/gid. The maildirs are actually in one of the account. I thought I could possibly craft a public namespace for those maildirs as explained in the wiki, but alas, it doesn't quite work as I expected: excerpt of dovecot.conf: namespace public { separator = / prefix = marketing/ location = maildir:/home/marketing/Maildir:INDEX=%h/ } users belong to the marketing group. $ find /home/marketing/Maildir -ls 4767751 4 drwxrwxr-x 3 marketing marketing 4096 Mar 14 11:57 . 4767752 4 drwxrwsr-x 6 marketing marketing 4096 Mar 14 11:59 ./Maildir 4767753 4 drwxrwsr-x 2 marketing marketing 4096 Mar 14 11:57 ./Maildir/cur 4767754 4 drwxrwsr-x 2 marketing marketing 4096 Mar 14 11:57 ./Maildir/tmp 4767755 4 drwxrwsr-x 2 marketing marketing 4096 Mar 14 11:57 ./Maildir/new 4767756 0 -rw-r--r-- 1 marketing marketing 0 Mar 14 11:57 ./Maildir/dovecot-shared >From there, the namespace is visible from all the IMAP accounts. Now, if a user creates a new folder in this public namespace, here is what I get: 4767757 4 drwx--S--- 5 brice marketing 4096 Mar 14 12:05 ./Maildir/.test 4767758 4 drwx--S--- 2 brice marketing 4096 Mar 14 11:59 ./Maildir/.test/cur 4767759 4 drwx--S--- 2 brice marketing 4096 Mar 14 11:59 ./Maildir/.test/new 4767760 4 drwx--S--- 2 brice marketing 4096 Mar 14 11:59 ./Maildir/.test/tmp 4767761 0 -rw-r--r-- 1 brice marketing 0 Mar 14 11:59 ./Maildir/.test/dovecot-shared 4767762 4 -rw------- 1 brice marketing 6 Mar 14 11:59 ./Maildir/subscriptions As you can see: the cur,new,tmp dir don't have the right permissions (they're not rw for the group), and moreover, the 'subscriptions' file has the same problem. The result is that any other user don't have access to this directory even if it is in a public namespace. Now, the question, is: is that setup could work only with virtual users setup with a static uid/gid ? Is there a mean to implement what I want ? Does using symlinks instead of the namespace could work ? Regards, -- Brice Figureau <brice+dovecot(a)daysofwonder.com>

2 2

[Dovecot] operation not supported ?
by Frank Bonnet 14 Mar '06

14 Mar '06

Hello I have this error message in the errorlog but I configured dovecot to use /var/mail/%u anyone could explain ? dovecot: Mar 14 10:49:36 Error: imap(xxxxxx): flock() failed with file /user/xxxxxx/Mail/.imap/INBOX/dovecot.index.log: Operation not supported Thank you

2 1

[Dovecot] mbox to maildir conversion - good idea regarding Outlook?
by Gerhard Hofmann 13 Mar '06

13 Mar '06

Hi list, first of all, many thanks to the Dovecot authors for supplying an IMAP server that works well with M$-Outlook! I have used UW-imapd for quite a while and was annoyed by frequent "imap...timeout..." error messages. Now I'd like to give maildir format a try because I want to use email sub-folders. What are other Outlook users' experiences with maildir? Is it as stable as mbox? Regards Gerhard

6 7

RE: [Dovecot][solved] imap permission denied
by Roland Schmid 13 Mar '06

13 Mar '06

> You better take a look at doc/mail-storages.txt as stated in the comments > of the configuration file. > thanks, now it works. The dovecot.conf was wrong configured and the permissions in the /home folders where given not correctly Now we are able to read our mail with outlook and via SquirellMails Kind regards, Roland

2 1

Re: [Dovecot] Migrating UW-IMAP to Dovecot on Solaris 9
by Bertrand Leboeuf 13 Mar '06

13 Mar '06

Works well if I use default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u but everything stays in mbox format How can I set new users to Maildir format, old ones with mbox, If I use default_mail_env = maildir:%h/Maildir mailboxes get created in Maildir but I don't get any new email the new emails are sent to /var/mail/%u right now. > >if you're using wu-imap, you'll need this for pop to work. > >pop3_uidl_format = %08Xv%08Xu > >and if your site is relatively big, dovecot may run out of file >descriptors, you may need to use this. > >/usr/bin/plimit -n 8192,8192 `cat /usr/local/var/run/dovecot/master.pid` > > >and watch the logs :) > > >> In the process of migrating to Dovecot 1.0beta3, any tips or >> step-by-step instructions that might relate to Solaris 9. >> >> Thanks >> >> Bertrand Leboeuf >> leboeuf(a)emt.inrs.ca >> >> >

1 0

[Dovecot] tls
by lenny＠edpausa.com 13 Mar '06

13 Mar '06

is it possible to turn off TLS and only SSL ? The reason are many reasons for this, one major being the fact that TLS is automatically discovered by many clients on the standard ports, thus requiring a valid cert for production use, while SSL could be set up on some unknown to anybody port with self signed cert for testing, etc... thank you

1 0

RE: [Dovecot] imap permission denied
by Roland Schmid 13 Mar '06

13 Mar '06

> Are you sure that the home directory is correctly specified? > no I am not sure. In my dovecot.conf I have added this line: default_mail_env = mbox:/var/mail/:INBOX=/var/mail/%u Does each user have its own INBOX files in their home folder? Kind regards, Roland

1 0

[Dovecot] imap permission denied
by Roland Schmid 13 Mar '06

13 Mar '06

Hello, we have problems to access our users mailboxes with SquirrelMail. The log file /var/log/mail.log says permission denied, only one user is allowed to read his mail with SquirrelMail. We are running Debian Sarge, Mailserver is Postfix, imap server is dovecot. Our Mailboxes are stored in the mbox format. Folder of the mbox files is /var/mail/ the users are unix system accounts. Normally we read are mail with the POP-Client Outlook, this works well. But we also want to be able to read our mail (each user his own mails) via SquirrelMail /var/log/mail.log says: Mar 13 10:54:40 webserver dovecot: imap(unix-system-account): mkdir_parents(/var/mail/.imap/INBOX) failed: Permission denied In the folder where the mbox files are stored exists 3 folders called INBOX.drafts INBOX.sent INBOX.trash These folders are owned by the user who is able to read his mail via SquirrelMail and owned by the group mail. Only the user has read and write permissions. Does each user need to have his own INBOX Files? Could you please help me Kind regards, Roland

1 0