- dovecot - dovecot.org

[Dovecot] LDAP mailLocation weirdness
by Udo Rader 12 Feb '06

12 Feb '06

Hi, I've reported this some month ago before (without response), but still I have no clue what is going wrong. Our installation is LDAP based (for virtual hosting) and up to I think alpha2 or 3 everything was working as expected. The trouble I have is that dovecot does not correctly use the information it gets about mailLocation. This is what is stored in the MailMessageStore attribute for a user "f.someone": mbox:/virtual/oeush.at/var/mail/f.someone:INBOX=/virtual/oeush.at/var/mail/f.someone now despite of this setting, this user is unable to fetch any mail, because dovecot partially ignores this setting: ---------CUT--------- dovecot: Feb 04 12:20:42 Info: pop3(f.someone.oeush.at): Effective uid=200, gid=4000 dovecot: Feb 04 12:20:42 Info: pop3(f.someone.oeush.at): mbox: data=/virtual/oeush.at/home/f.someone/mail/:INBOX=/var/mail/f.someone.oeush.at dovecot: Feb 04 12:20:42 Info: pop3(f.someone.oeush.at): mbox: root=/virtual/oeush.at/home/f.someone/mail, index=/virtual/oeush.at/home/f.someone/mail, inbox=/var/mail/f.someone.oeush.at ---------CUT--------- As you can see, dovecot uses /virtual/oeush.at/... both for data and index but not for inbox, where it uses /var/mail/... My LDAP configuration for the mailLocation settings looks like this: ---------CUT--------- # User attributes in order: # Virtual user name (user@domain) # Home directory # MAIL environment # System user name (for getting user's groups from /etc/group) # - For virtual users you don't want to use this, so this defaults to none. # System UID # System GID user_attrs = uid,homeDirectory,MailMessageStore,,uidNumber,gidNumber ---------CUT--------- So where am I wrong? Udo Rader -- BestSolution.at EDV Systemhaus GmbH http://www.bestsolution.at

2 2

[Dovecot] startup script
by William Ross 12 Feb '06

12 Feb '06

hello, Lacking any other guidance, I'm using the following minimal sysv script to start and stop dovecot. If anyone would like to comment on or improve it, I'd be most grateful. thanks, will #!/bin/sh # # System V init script for dovecot imap server # bodged together by will 12.2.06 PIDFILE="/var/run/dovecot/master.pid" LONGNAME="dovecot imap server" NAME="dovecot" DOVECOT='/usr/local/sbin/dovecot' case $1 in start) echo -n "Starting $LONGNAME"; dovecot echo "...done"; ;; stop) echo -n "Stopping $LONGNAME" PID=`cat $PIDFILE` kill $PID echo "...done"; ;; *) N=/etc/init.d/$NAME echo "Usage: $N {start|stop}" >&2 exit 1 ;; esac exit 0 # EOF

1 0

[Dovecot] debian testing and dovecot
by vmstech 12 Feb '06

12 Feb '06

Hi all - Does anyone know how far off beta2 is from getting into debian testing? thx Glenn

2 1

[Dovecot] Compiling Dovecot with gssapi
by Luca Bertoncello 12 Feb '06

12 Feb '06

Hi, all! I'm new to Dovecot and I try to compile it to allow GSSAPI authentication. Unfortunately, configure says me always: Install prefix ...................... : /usr/local File offsets ........................ : 64bit I/O loop method ..................... : poll File change notification method ..... : dnotify Building with SSL support ........... : yes (OpenSSL) Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with GSSAPI support ........ : no Building with user database modules . : static prefetch passwd passwd-file checkpassword mysql (modules) Building with password lookup modules : passwd passwd-file shadow pam checkpassword mysql (modules) And, of course, I can't use this authentication method... I searched in google and Dovecot docs, but I didn't found anything... Can someone help me? The system is a Linux RedHat 9 Thanks a lot! -- _______________________________ Luca Bertoncello -Programmierung / Mailserver- IMS Internet-Media-Service GmbH Bärensteiner Straße 7 01277 Dresden Fon: +49 351 2112034 Fax: +49 351 2112020 email: bertoncello(a)internet24.de

3 2

[Dovecot] Dovecot pop3s problem : can't see email
by Rory Campbell-Lange 11 Feb '06

11 Feb '06

Hi. I am trying to setup dovecot running a pop3 service for external clients (and intend in future to setup an imap interface on localhost only for squirrelmail.) Exim is delivering ok to local mailboxes, but I can't seem to get dovecot to serve them. Configuration details: ---------------------- All users run as the tst user, and authentication is done through postgresql. ...excerpt... mail_extra_groups = tst default_mail_env = mbox:INDEX=~/home/tst/Mail/:/home/tst/Mail/%u protocol pop3 { pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } ...excerpt... Log details: ------------ The log shows that docecot is looking at /home/tst/Mail/test Feb 11 13:54:55 tst dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=POP3^Isecured^Ilip=217.147.82.200^Irip=83.146.33.145^Iresp=AHRlc3QAcXVhdWpv Feb 11 13:54:55 tst dovecot: auth(default): sql(test,83.146.33.145): query: SELECT passwd as password FROM users WHERE userid = 'test' AND active = 'Y' Feb 11 13:54:55 tst dovecot: auth(default): client out: OK^I1^Iuser=test Feb 11 13:54:55 tst dovecot: auth(default): master in: REQUEST^I1^I14586^I1 Feb 11 13:54:55 tst dovecot: auth(default): sql(test,83.146.33.145): SELECT '/home/tst/Mail/' || home AS home, uid, gid FROM users WHERE userid = 'test' AND active = 'Y' Feb 11 13:54:55 tst dovecot: auth(default): master out: USER^I1^Itest^Ihome=/home/tst/Mail/test^Iuid=1001^Igid=1001 Feb 11 13:54:55 tst dovecot: pop3-login: Login: user=<test>, method=PLAIN, rip=83.146.33.145, lip=217.147.82.200, TLS Feb 11 13:54:58 tst dovecot: pop3(test): Logout. top=0/0, retr=0/ del=0/0, size=0 tst:/home/tst/Mail# ls -lt | grep test -rw------- 1 tst tst 1017 Feb 11 13:41 test -- Rory Campbell-Lange <rory(a)campbell-lange.net> <www.campbell-lange.net>

1 0

[Dovecot] Bug in gssapi support
by Mark Davies 10 Feb '06

10 Feb '06

Hi, Was trying to use the gssapi support and the authentication would consistently die for me. The following patch fixes: --- src/auth/mech-gssapi.c.orig 2006-01-10 15:46:10.000000000 +1300 +++ src/auth/mech-gssapi.c @@ -138,7 +138,7 @@ static OM_uint32 obtain_service_credenti return major_status; } - gss_release_name(&minor_status, gss_principal); + gss_release_name(&minor_status, &gss_principal); return major_status; } as gss_release_name takes a pointer to a gss_name_t as second arg. cheers mark

1 0

[Dovecot] Outlook anonymous IMAP login
by Vincent Jaussaud 10 Feb '06

10 Feb '06

Hello guys, I'm trying to setup anonymous IMAP login on a bunch of Outlook clients, but it doesn't seems to work. I'm using dovecot-0.99.14-r1, on a Gentoo Linux OS. Using command line anonymous login, it's working just fine: youri / # telnet localhost 143 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK dovecot ready. . CAPABILITY * CAPABILITY IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN LISTEXT LIST-SUBSCRIBED NAMESPACE STARTTLS AUTH=PLAIN AUTH=ANONYMOUS . OK Capability completed. . AUTHENTICATE ANONYMOUS + . OK Logged in. But with Outlook it's not working at all. I tried using no password, or just some random stream, it makes no difference. The error I got in dovecot's logs are: Feb 07 12:31:16 Info: PAM: pam_authenticate(anonymous) failed: Authentication failure Feb 07 12:31:19 Info: PAM: pam_authenticate(anonymous) failed: Authentication failure Feb 07 12:31:28 Info: PAM: pam_authenticate(anonymous) failed: Authentication failure My assumption is that Outlook doesn't provide anonymous IMAP support. Could someone confirm this ? Do you know if any workaround/anonymous plugin exist ? Thanks ! --- Everything takes longer, costs more, and is less useful. -- Erwin Tomash

3 4

[Dovecot] Simulating UW Snarf...
by Todd Piket 10 Feb '06

10 Feb '06

I already wrote to Timo, but I thought some others on this list may have had a similar situation. So here goes: The scenario at Michigan Technological University stems from long standing traditions and policies that probably won't change. That said, two of the policies are 1.)we don't bounce mail and 2.)we guarantee delivery when we accept a piece of mail. The UW IMAP "snarf" capability was nice because it allowed us to introduce file system, per user quotas w/o worrying about the "INBOX" in an over quota situation. This is because the user could still read mail. The delivered mail would get "snarfed" from /var/mail/user when the user went back under quota. In our test cases with switching to Maildir with Dovecot, we deliver directly to the user's INBOX instead of /var/mail/user so what do we do when the user is over quota because we can't bounce the mail? After many lengthy discussions our thought was this. Could we symbolically link the user's "Maildir/new" to a non-quota file system such that the move from "new" to "cur" would fail if the user is over quota? What will Dovecot do in that failure situation? Do you have other suggestions? I would be more than willing to develop a patch that makes this an option in the config file. Probably similar to allowing the indexes and control files be on a non-quota file system. Again, it would only allow "Maildir/new" to be on a separate file system, not the whole "INBOX". I hope this conveys the idea well enough. Any thoughts or ideas the list provides would be greatly appreciated. -- Regards, ------------------------------------------------------------ | Todd Piket | Email: todd(a)mtu.edu | | Programmer/Analyst | Phone: (906) 487-1720 | | Distributed Computing Services | | | Michigan Technological University | | ------------------------------------------------------------

8 18

[Dovecot] In-memory Index file bug
by Tony Kay 10 Feb '06

10 Feb '06

Hi, I am getting intermittent error messages in the log when my mail client tries to create/open a folder named ".imhoprefs". Some accounts seem to able to do it, but I have at least one that gives the log error: Feb 7 09:29:54 acad-cl1 dovecot: imap(tkay): close() failed with index file (in-memory index): Bad file descriptor I traced through the code, and it seems to be coming from mail_index_close() (line 1527 of mail-index.c), which seems to be attempting to close a file descriptor for an index. The funny thing is that since I am using in-memory indexes, I believe that there shouldn't be any file descriptor to close, which would explain why the close is failing... Environment information: - Dovecot 1.0b2 - mbox - Environment setting: default_mail_env = mbox:%h:INBOX=%h/.mail:INDEX=MEMORY - Attempting to create/use a folder called mail/.imhoprefs At first, I though the folder itself might be corrupted, so I removed it. No dice. I've checked file permissions. No problems. I honestly can't explain why some users are able to use this folder without error, and others are not. -- Anthony Kay University Computing Center (541) 346-1719 GPG Fingerprint: B0DB D46A 60AF FAE7 A94A 5075 0CB4 4D88 9F4F 7F09 Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning. Rich Cook

2 1

[Dovecot] RE: epoll error when running as proxy
by Bill Boebel 10 Feb '06

10 Feb '06

Also, for testing in the error message I patched src/lib/ioloop-epoll.c to show the "ret" and "errno" variables as well as the variable names, which is why there is a bit of extra data in this error message... imap-login: io_loop_handle_add: epoll_ctl(op=3, fd=10, ret=-1, errno=2): No such file or directory Bill On Thursday, February 9, 2006 16:32, Bill Boebel said: > I am running dovecot 1.0 beta3 as a front-end proxy, and getting the > following error when using epoll. The error goes away if I switch to > poll. On the backend IMAP server I see that the login was successful. > The error occurs when I try to retrieve an email or get a folder listing > via IMAP after logging in successfully... > > Feb 9 15:35:57 director4 dovecot: imap-login: proxy(bboebel(a)webmail.us): > started: user=<bboebel(a)webmail.us>, method=plain, rip=204.119.252.7, > lip=192.168.1.68 > Feb 9 15:09:50 director4 dovecot: imap-login: io_loop_handle_add: > epoll_ctl(op=3, fd=10, ret=-1, errno=2): No such file or directory > Feb 9 14:58:23 director4 dovecot: child 9688 (login) returned error 89 > > I can't find anything in the mailing list archives about this error, so > here are some details. I hope somebody can point me in the right > direction to fix this. > > - I am running this on Red Hat ES4 (32-bit x86), compiling with the > following options: > > ./configure \ > --prefix=/usr \ > --sysconfdir=/etc \ > --localstatedir=/var \ > --with-ssldir=/usr/share/ssl \ > --disable-ipv6 \ > --with-file-offset-size=32 \ > --with-mem-align=4 \ > --with-ioloop=epoll \ > --without-passwd \ > --without-passwd-file \ > --without-shadow \ > --without-pam \ > --without-checkpassword \ > --without-bsdauth \ > --without-gssapi \ > --with-ldap \ > --without-vpopmail \ > --with-static-userdb \ > --with-prefetch-userdb \ > --without-pgsql \ > --with-mysql \ > --without-sqlite \ > --without-ssl \ > --with-storages=maildir > > - I have also complied with these options and got the same error: > > ./configure \ > --prefix=/usr \ > --sysconfdir=/etc \ > --localstatedir=/var \ > --with-ioloop=epoll \ > --with-mysql > > > - I have also tried the latest CSV snapshot (dovecot-20060209.tar.gz) and > 1.0 beta2, and I get the same error. > > - If I switch to poll instead of epoll, everything works fine. > > Any ideas? > > Bill >

5 8

[Dovecot] If mbox does not exist dovecot creates directory
by Alexander Shikoff 10 Feb '06

10 Feb '06

Hi, I've searched the archive of mailing list but did not find anything about this issue. dovecot 1.0alpha5, using mbox format and MySQL DB of users When user is trying to login via POP3 and there is no corresponding mailbox for it dovecot creates a directory instead of mbox file. In this time log looks like Feb 10 10:39:36 orion dovecot: auth-worker(default): sql(ivan.sid(a)my.com.ua,192.168.3.9): query: SELECT `password` FROM `users` WHERE login = 'ivan.sid(a)my.com.ua' Feb 10 10:39:36 orion dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.5.23 rip=192.168.3.9 resp=AGl2YW4uaXZhbm9mZkBmY2JhbmsuY29tLnVhADE= Feb 10 10:39:36 orion dovecot: auth(default): client out: OK 1 user=ivan.sid(a)my.com.ua Feb 10 10:39:36 orion dovecot: auth-worker(default): sql(ivan.sid(a)my.com.ua,192.168.3.9): SELECT "mbox:/var/mail/virtual/my.com.ua/ivan.sid:INBOX=/var/mail/virtual/my.com.ua/ivan.sid:INDEX=MEMORY" AS `mail`, 'mailnull' AS `uid`, 'mail' AS `gid` FROM users WHERE login = 'ivan.sid(a)my.com.ua' Feb 10 10:39:36 orion dovecot: auth(default): master in: REQUEST 101 98738 1 Feb 10 10:39:36 orion dovecot: auth(default): master out: USER 101 ivan.sid(a)my.com.ua mail=mbox:/var/mail/virtual/my.com.ua/ivan.sid:INBOX=/var/mail/virtual/my.com.ua/ivan.sid:INDEX=MEMORY uid=26 gid=6 Feb 10 10:39:36 orion dovecot: pop3(ivan.sid(a)my.com.ua): Effective uid=26, gid=6 Feb 10 10:39:37 orion dovecot: pop3(ivan.sid(a)my.com.ua): mbox: data=/var/mail/virtual/my.com.ua/ivan.sid:INBOX=/var/mail/virtual/my.com.ua/ivan.sid:INDEX=MEMORY Feb 10 10:39:37 orion dovecot: pop3(ivan.sid(a)my.com.ua): mbox: root=/var/mail/virtual/my.com.ua/ivan.sid, index=, inbox=/var/mail/virtual/my.com.ua/ivan.sid Feb 10 10:39:37 orion dovecot: pop3(ivan.sid(a)my.com.ua): open() failed with mbox file /var/mail/virtual/fcbank.com.ua/ivan.sid: Is a directory Feb 10 10:39:37 orion dovecot: pop3(ivan.sid(a)my.com.ua): Mailbox init failed top=0/0, retr=0/ del=0/0, size=0 Feb 10 10:39:37 orion dovecot: pop3-login: Login: user=<ivan.sid(a)my.com.ua>, method=PLAIN, rip=192.168.3.9, lip=192.168.5.23 Please help me with this issue! Thanks in advance, Alexander -- Kind Regards, Alexander Shikoff minotaur(a)crete.org.ua

2 2

[Dovecot] Maildir, imap and newness of messages
by Anand Buddhdev 10 Feb '06

10 Feb '06

I'm using the standard Dovecot 0.99.14 on Fedora Core 4, with a Maildir++ mailbox. I've noticed what I think is an oddity in the way dovecot handles messages: According to the Maildir specification, a message in Maildir/new is a truly new message, which has not yet been touched by any reader. From an IMAP viewpoint, such a message should have the flag RECENT. However, if a message exists in Maildir/cur, then it means that the message is no longer new (because some other reader has opened the Maildir, and moved the message from new to cur). From an IMAP viewpoint, such a message should NOT have the RECENT flag. However, dovecot seems to get this wrong. For example, if I have a message in Maildir/new, and I use mutt (a console-based maildir-aware mail client) to open the Maildir, then mutt moves the messages from Maildir/new to Maildir/cur (note here that I haven't actually read the message yet, just opened the Maildir with mutt). I expect that when I now open this Maildir with dovecot imap, and do a "select inbox", it should report "1 EXISTS" and "0 RECENT". However, dovecot reports this as "1 EXISTS" and "1 RECENT". In my opinion, this is a bug in Dovecot. Would any of the developers like to comment? Anand

3 3

[Dovecot] Dovecot stops logging of imap logins after logrotation
by Gerhard Hofmann 10 Feb '06

10 Feb '06

Hi list, on my Debian box there is a logrotation cron job that will gzip existing /var/log/mail.log file and create a new mail.log. It seems that after running logrotation dovecot stops logging successful POP or IMAP logins to /var/log/mail.log (nevertheless, it still works to login with POP or SMTP). This is bad because pop-before-smtp mechanisms also stop working. I have deactivated logrotation cron job and will monitor mail.log file. Maybe I should just run /etc/init.d/dovecot restart after logrotation script. What do you think? TIA Gerhard

5 4

[Dovecot] Programming Help
by Neal Katz 10 Feb '06

10 Feb '06

Hi, I was hoping you could provide me with some pointers on how to get started adding some features to dovecot. What I am trying to do is add an optional publish mechanism, that would publish a list of events as they occur, so that an external program could read these events and do "something". These events would be "Add", "Delete", "Move" - these would be posted every time a new message is added, deleted or moved. "CreateDir", "DeleteDir" would be published when a user creates a subf-folder or removes one. A simple example would be to configure the system to publish 'Add Message' events, and then an external program would read these, and send a notification event to web based users who are currently logged in. The publish feature would be controlled by the config file, and would be disabled by default The config setting would allow an administrator to specify what events to publish, the mechanism to use, and optional arguments for the mechanism For mechanisms I plan on developing a file based system, one file per event, written into a directory, the subscriber/reader would delete the file Other mechanisms could include TCP/IP based (connect to port XX, and send some data); or even connect to a commercial Message Queue product. Ex. Publish=ADD+DELETE+MOVE:file:/var/spool/imapevents Or Publish=ADD+DELETE+MOVE:tcpip:localhost:9999 It would help me a lot if you could just provide me with a few pointers as to the best place to add my features into the dovecot code, I took a quick look at the code and decided to contact you first before going ahead and putting things in the WRONG place. I did see the code for supporting inotify and similar mechanisms, but I don't see the big picture ? How does dovecot use inotify ?, what features are enabled that you don't get without inotify. If you have a code-roadmap, or architectural diagrams (or doodles) that would be helpful too. In terms of inotify, I don't think this will work for me, since I would like to have the user, Message-Id and Imap UIDL sent in the event message I hope this makes sense, if not just send me an email asking for clarification. All of the changes I make I will submit back to you, and hopefully they will be made part of the base product. Thanks, Neal Katz p.s. I chose Dovecot because I was very impressed with the ease of installation and migration (from courier), my early tests have shown it to be twice as fast when traverse all messages in a large mailbox ( 100K message ).

3 2

[Dovecot] Mixed IMAP/POP3 environment, a success
by Denis Sbragion 10 Feb '06

10 Feb '06

Hello everybody, I just want to inform the Dovecot developers and users that I completely migrated the first mailbox (my own one) from Eudora/UW to SquirrelMail/Dovecot. I'm using it since a couple of days and after a bit of tuning (mostly SquirrelMail related) it works like a charm. I even performed some heavy operations, like moving thousands of messages between different mailboxes or searching within a 1 Gb folder, and performances are indeed great. My sincere greatest compliments to the Dovecot developers and my biggest thanks to the people who helped me. No wonder that Fedora/RedHat has decided to adopt Dovecot as the default IMAP server for future releases. It looks like the perfect balance between security, performances, flexibility, standards conformance and ease of use. Bye, -- Denis Sbragion InfoTecna Tel: +39 0362 805396, Fax: +39 0362 805404 URL: http://www.infotecna.it

1 0

[Dovecot] Dovecot 1.0b2 now in pkgsrc packaging system
by Todd Vierling 10 Feb '06

10 Feb '06

After months of testing in the "work in progress" pkgsrc-wip playground, dovecot-1.0b2 is now in the main pkgsrc mainline and will be tracked up through the 1.0 release and beyond. This means it's now much easier to get Dovecot 1.0 up and running on NetBSD and any other platform supported by pkgsrc (see www.pkgsrc.org) prior to this, 0.99.x was the newest available. Binary packages for NetBSD and some other systems should start appearing within a week or two of this message. As before, dovecot-nightly is still available in the pkgsrc-wip package tree, for those who like to live on the edge. -- -- Todd Vierling <tv(a)duh.org> <tv(a)pobox.com> <todd(a)vierling.name>

2 1

RE: [Dovecot] alternate ports?
by Villalovos, John L 09 Feb '06

09 Feb '06

dovecot-bounces(a)dovecot.org <> wrote: > On Thu, Feb 09, 2006 at 02:40:45PM -0800, Gregory K. Ruiz-Ade wrote: > >> I'm trying to set up 1.0 beta 2 on one of our systems, and would >> like to run it on alternate ports from the standard IMAP and >> IMAP/SSL ports so that we can test it out a couple users at a time. >> How does one tell dovecot to listen on alternate ports? I can't >> find anything in the example config file... > > imap_listen = host:port > pop3_listen = host:port I don't think that works in the 1.0b beta 2 (Note: 1.0 beta 3 just came out): Try something like this: # Listen on localhost for IMAP. Listen on all interfaces for IMAP/SSL protocol imap { listen = 127.0.0.1 ssl_listen = * }

1 0

[Dovecot] alternate ports?
by Gregory K. Ruiz-Ade 09 Feb '06

09 Feb '06

I'm trying to set up 1.0 beta 2 on one of our systems, and would like to run it on alternate ports from the standard IMAP and IMAP/SSL ports so that we can test it out a couple users at a time. How does one tell dovecot to listen on alternate ports? I can't find anything in the example config file... Thanks, Gregory -- Gregory K. Ruiz-Ade Sr. Systems Administrator Computer Science and Engineering University of California, San Diego Office: EBU3b 1216 Phone: (858) 822-2625 E-mail: gkra(a)ucsd.edu

3 2

[Dovecot] Openwebmail with Dovecot
by ftnx＠ksbase.com 09 Feb '06

09 Feb '06

So far I've managed to get Dovecot to work fine for regular POP users and Squirrelmail. Even though it seems dead slow and obsolete, a few users would like to use Openwebmail. All users are virtual, and there are/will be no system accounts. Anyone have a working example for Dovecot/Openwebmail for virtual user setup? Kari Suomela KARICO Business Services Toronto, ON Canada http://www.karico.ca

4 5

[Dovecot] epoll error when running as proxy
by Bill Boebel 09 Feb '06

09 Feb '06

I am running dovecot 1.0 beta3 as a front-end proxy, and getting the following error when using epoll. The error goes away if I switch to poll. On the backend IMAP server I see that the login was successful. The error occurs when I try to retrieve an email or get a folder listing via IMAP after logging in successfully... Feb 9 15:35:57 director4 dovecot: imap-login: proxy(bboebel(a)webmail.us): started: user=<bboebel(a)webmail.us>, method=plain, rip=204.119.252.7, lip=192.168.1.68 Feb 9 15:09:50 director4 dovecot: imap-login: io_loop_handle_add: epoll_ctl(op=3, fd=10, ret=-1, errno=2): No such file or directory Feb 9 14:58:23 director4 dovecot: child 9688 (login) returned error 89 I can't find anything in the mailing list archives about this error, so here are some details. I hope somebody can point me in the right direction to fix this. - I am running this on Red Hat ES4 (32-bit x86), compiling with the following options: ./configure \ --prefix=/usr \ --sysconfdir=/etc \ --localstatedir=/var \ --with-ssldir=/usr/share/ssl \ --disable-ipv6 \ --with-file-offset-size=32 \ --with-mem-align=4 \ --with-ioloop=epoll \ --without-passwd \ --without-passwd-file \ --without-shadow \ --without-pam \ --without-checkpassword \ --without-bsdauth \ --without-gssapi \ --with-ldap \ --without-vpopmail \ --with-static-userdb \ --with-prefetch-userdb \ --without-pgsql \ --with-mysql \ --without-sqlite \ --without-ssl \ --with-storages=maildir - I have also complied with these options and got the same error: ./configure \ --prefix=/usr \ --sysconfdir=/etc \ --localstatedir=/var \ --with-ioloop=epoll \ --with-mysql - I have also tried the latest CSV snapshot (dovecot-20060209.tar.gz) and 1.0 beta2, and I get the same error. - If I switch to poll instead of epoll, everything works fine. Any ideas? Bill

1 0

[Dovecot] trouble compiling today's CVS in Solaris 9
by Glenn Leavell 09 Feb '06

09 Feb '06

I've recently been able to compile the CVS code in Solaris 9, but I'm now getting a few errors. First, I receive this error during the autogen process: src/plugins/Makefile.am:5: required directory src/plugins/convert does not exist configure.in:1717: required file `src/plugins/convert/Makefile.in' not found I can workaround that by removing the reference to src/plugins/convert in configure.in. I then get this error: src/plugins/Makefile.am:5: required directory src/plugins/convert does not exist I can workaround that by removing the reference to the convert plugin from src/plugins/Makefile.am. After that, the autogen process completes and I get the previously discussed shell error when running make: if [ "" != "" ]; then \ for i in ; do \ echo "extern struct sql_db driver_${i}_db;" >>sql-drivers-register.c ; \ done \ fi /bin/bash: -c: line 1: syntax error near unexpected token `;' /bin/bash: -c: line 1: `if [ "" != "" ]; then for i in ; do echo "extern struct sql_db driver_${i}_db;" >>sql-drivers-register.c ; done fi' I can workaround that by simply running make from /bin/sh. I then get this error: Making all in auth make[3]: Entering directory `/home/glenn/dovecot/src/auth' /bin/bash ../../libtool --mode=link --tag=CC gcc -std=gnu99 -g -O2 -Wall ... <snip> userdb-prefetch.o userdb-static.o userdb-vpopmail.o userdb-sql.o -L/usr/local/ssl/lib libpassword.a ../lib-settings/libsettings.a ../lib-ntlm/libntlm.a ../lib-sql/libsql.a ../lib/liblib.a -lcrypt -lpam -lldap -ldl -lsocket -lnsl -lrt -lsendfile Undefined first referenced symbol in file sql_drivers_register_all main.o ld: fatal: Symbol referencing errors. No output written to dovecot-auth collect2: ld returned 1 exit status make[3]: *** [dovecot-auth] Error 1 make[3]: Leaving directory `/home/glenn/dovecot/src/auth' I'm not sure why sql_drivers_register_all is getting referenced. I tried explicitly turning off all sql-related options on the configure command line, and that didn't help. Any help would be appreciated. Thanks! Glenn

2 1

[Dovecot] FreeBSD dovecot port maintainer
by Alexander Shikoff 09 Feb '06

09 Feb '06

Hi, How often does mantainer update dovecot in FreeBSD ports tree? It would be a good thing to get 1.0beta3 in ports... -- Kind Regards, Alexander Shikoff minotaur(a)crete.org.ua

1 0

[Dovecot] Re: Dovecot 1.0beta3 - make fails without sql
by Chris Wakelin 09 Feb '06

09 Feb '06

The problem seems to be in src/lib-sql/Makefile[.in] When there are no sql drivers to build, the shell-script for making sql-drivers-register.c fails. I've managed to get it to build by just having #include "lib.h" #include "sql-api.h" void sql_drivers_register_all(void) { } as sql-drivers-register.c Best Wishes, Chris P.S. I meant to send the message below to the whole list rather than just Timo. Sorry! Chris Wakelin wrote: > I'm getting build errors with 1.0-beta3. It looks like something to with > the dynamic SQL drivers; presumably needs equivalent of "-I../lib-sql" > somewhere! > > Configure line was "./configure --prefix=/opt/RDGdovect > --with-ssl=openssl", Solaris make, gcc 3.3.2 > > Best Wishes, > Chris > > Undefined first referenced > symbol in file > sql_drivers_register_all main.o > ld: fatal: Symbol referencing errors. No output written to dovecot-auth > collect2: ld returned 1 exit status > *** Error code 1 > make: Fatal error: Command failed for target `dovecot-auth' > > Timo Sirainen wrote: >> + Added support for loading SQL drivers dynamically (see INSTALL file >> for how to build them) > > -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 2

[Dovecot] configuring lda
by Lenny 09 Feb '06

09 Feb '06

after coping lda stanza into the config file, I get "unknown protocol name" error. adding lda to the list of protocols doesn't seem to do the trick. lda was built during compile and the binary is present, piping into it manually spits error messages about missing config, so how do I go about the problem above ? It is my undertanding that using dovecot-lda would help maintain the indexes in proper state ( as opposed to using procmail and having to rebuild indexes from scratch upon delivery of large amounts of mail ) ? mucho gracias to you all. protocol lda { # If you wish to use plugins you need to specify plugin directory # For example quota enforcing is implemented by plugin #module_dir = /usr/local/lib/dovecot/lda # Address from LDA should send MDNs like out of quota postmaster_address = postmaster(a)your.dom # If there is no user-specific Sieve-script, global Sieve script is # executed if set. #global_script_path = # UNIX socket path to master authentication server to find users. auth_socket_path = /var/run/dovecot-auth-master }

2 5

[Dovecot] Broken NSS Implementation
by Campbell McKilligan 08 Feb '06

08 Feb '06

We're getting this error when IMAP clients attempt to authenticate using their aliases rather than their actual username: Feb ... dovecot: auth(default): BROKEN NSS IMPLEMENTATION: getpwnam() lookup returned different user than was requested (campbellmckilligan != campbell.mckilligan). Feb ... dovecot: imap-login: Internal login failure: user=<campbell.mckilligan>, method=plain, rip=82.148.120.110, lip=172.20.2.2, TLS Feb ... dovecot: child 27345 (auth) returned error 89 For historic reasons, there is no consistency with which username in individuals mail client. NSS correctly returns the name that dovecot should use for the purposes of accessing mailboxes etc. Dovecot-0.99.14 worked fine in this regard - but since upgrading to 1.0beta3 we have this problem. It's running on a Fedora Core 4 server. It compiled fine with selinux enabled. Is there a switch to control the response to this NSS behaviour? Any help appreciated. Campbell

2 2

RE: [Dovecot] How to have a "public" readonly folder?
by Villalovos, John L 08 Feb '06

08 Feb '06

dovecot-bounces(a)dovecot.org <> wrote: > I have my email users who are using dovecot-1.0.beta2. I just upgraded to dovecot-1.0.beta3. No change. > I also have setup a dummy account to get the Linux Kernel Mailing > List (LKML) traffic. > > I would like to have it so that my IMAP users (maybe POP3 but > don't need > that) be able to read the LKML mailing list from that email account. > > I can put the email into an mbox or a maildir for the LKML mail. > > I have played around with the namespace and public option and I can't > get it to work :( > > I tried this: > > namespace public { > separator = / > prefix = Public/ > location = maildir:/home/virtemail/lkml/ > } > > In my email client (Mozilla Thunderbird 1.5), I am unable to view the > Public folder. If I select subscribe, I can see the Public folder > but it is grayed out. If I do a symbolic link it works, in the sense that I can know subscribe to the folder. I created the file 'dovecot-shared' in the shared folder (I also updated the Wiki to make the procedure a little bit clearer). I couldn't seem to figure out a good way to make it read only though. So I still can't seem to get the namespace method working. I also tried pointing the location at an mbox and that did not work. In the client I can see the Public folder listed but it is grayed out and won't let me subscribe. Any thoughts? Thanks, John

1 0

Re: [Dovecot] Mail.app message numbering for deleted messages
by Jesse Chan-Norris 08 Feb '06

08 Feb '06

On Mon, 23 Jan 2006, Jesse Chan-Norris wrote: > On Jan 22, 2006, at 6:44 AM, Timo Sirainen wrote: > > On Mon, 2006-01-16 at 18:29 -0500, jcn-dovecot(a)pith.org > wrote: > I'm having a strange problem that appeared when I > upgraded from� > > .99something to 1.0alpha3 and then disappeared for a while and then� > > re-appeared when I upgraded to 1.0alpha5. > > > I am using mbox and IMAP in Apple's Mail.app to read my mail. When I� > > delete a message in Mail.app, the message gets marked as deleted in the� > > spool and it disappears from the mail listing in Mail. However, the� > > message number does not change until I either manually flush the > > deleted� messages through mail, or I go offline which deletes the > > messages from the� spool. > > > I have mbox_lazy_writes set to 'no' but this didn't seem to have any� > > effect on the behavior. I never saw this type of behavior with UW-IMAP� > > either, which is what I migrated from. > > > What do you mean by "message number doesn't change"? > > To me this sounds like it all works as it should. Deleted messages are > really deleted only until expunge command is given, which is done when > you manually select "purge expunged messages" command or whatever it was > called in Mail. > > Maybe before with UW-IMAP you just had some "automatically expunge > messages" option set? I don't think that UW-IMAP was expunging messages because I could open up the mbox with pine and see all of the messages flagged as "Deleted" but not yet expunged. And when I try a similar test with Fastmail.fm (delete the message in Mail, then check using the web interface) the mail is marked as deleted in the web interface and does not show up in Mail.app but the messages are re-numbered appropriately. Granted, I have no idea how Mail.app does its numbering (especially since Thunderbird doesn't have message numbering), but is it possible that there's more information that the IMAP server should be sending back that Dovecot isn't? I've attached a screenshot from my Mail.app that shows the numbering issue. The gaps in the message sequence are where a deleted (but not expunged) message was. jcn

4 3

[Dovecot] Mac mail copy/delete problems w/1.0b2
by Tony Kay 08 Feb '06

08 Feb '06

Hi, Mac mail (a horribly mis-behaved client, it seems), has a horribly hard time deleting/copying large blocks of messages from one folder to another. The basic symptom is: 1. Select a bunch of messages 2. Click on delete 3. Wait for a _very_ long time. It also seems very slow on copying, so it may be the "trash folder copy on delete" that is really slowing it down. Anybody else seen this? -- Anthony Kay University Computing Center (541) 346-1719 GPG Fingerprint: B0DB D46A 60AF FAE7 A94A 5075 0CB4 4D88 9F4F 7F09 The best way to have a good idea is to have a lot of ideas. Dr. Linus Pauling

4 6

[Dovecot] Dovecot does not access /var/mail when using Maildir
by mirko＠mirkonet.nl 08 Feb '06

08 Feb '06

Hello, I'm running debain on my machine with postfix, squirrelmail and dovecot installed. Everything works fine and I'm able to access my mail via squirrelmail and via Outlook with imap. However I want to create subfolders what is not possible. After reading I discovered that I use mbox and that maildir is needed in order to be able to use subfolders. I have created a Maildir folder with the maildirmake.dovecot command in my /home/mirko directory and corrected the owner. Now dovecot uses the Maildir and I can create subfolers. However my problem is that I don't receive Emails in my Inbox. Incoming mails are delivered to /var/mail/mirko, but when dovecot uses Maildir it doesn't access this. I have played with the default_mail_env settings in dovecot.conf which does influence the use of mbox or Maildir. However the problem remains: As soon as Maildir is used, the Inbox is empty and I don't receive Email. Is there a way when Maildir is used to point dovecot to /var/mail/ for the incoming Email? Or do I something else wrong? Your help is appreciated. Greetings, Mirko

3 3

[Dovecot] Out of memory problem
by Neil Wilson 08 Feb '06

08 Feb '06

Hi guys, Running SuSe 9.3 with dovecot 1.0.alpha3 source installation. One of the users has quite a lot of important email in a folder, but when he trys to view this folder, it either sits and waits, and then times out, or just logs out straight away. Looking in the log(/var/log/mail), I'm getting the following error. Feb 6 09:22:08 mail postfix/qmgr[27221]: 198B96D1CE: removed Feb 6 09:22:08 mail dovecot: imap(ralphs): pool_system_malloc(): Out of memory Feb 6 09:22:08 mail dovecot: child 23018 (imap) returned error 83 (Out of memory) I've searched around on google for this error and haven't found anything useful as of yet. My next step is to upgrade to the latest version of dovecot, but this is quite a large company, and I will need to wait until after hours to do the upgrade. Any help would be greatly appreciated. Thanks! Neil Wilson DcData Powered by Linux, driven by passion! -- This email and all contents are subject to the following disclaimer: http://www.dcdata.co.za/emaildisclaimer.html

3 11

[Dovecot] Latest snapshot: ./configure does not finish normally
by Alexander Shikoff 08 Feb '06

08 Feb '06

Hi, OS: FreeBSD 6.0-RELEASE-p2 latest dovecot snapshot does not configurable. ./configure script fails: # ./configure --prefix=/usr/local/dovecot --with-passwd --with-passwd-file --without-shadow --with-pam --without-bsdauth --without-ldap --without-vpopmail --with-static-userdb --without-pgsql --with-mysql --with-pop3d --disable-ipv6 --with-storages [... skip ...] config.status: creating src/pop3/Makefile config.status: creating src/pop3-login/Makefile config.status: creating src/util/Makefile config.status: creating src/plugins/Makefile config.status: error: cannot find input file: src/plugins/convert/Makefile.in Snapshot dated 20060201 is configurable, but `make' fails: # ./configure --prefix=/usr/local/dovecot --with-passwd --with-passwd-file --without-shadow --with-pam --without-bsdauth --without-ldap --without-vpopmail --with-static-userdb --without-pgsql --with-mysql --with-pop3d --disable-ipv6 --with-storages [... skip ...] # make gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -o imap cmd-append.o cmd-authenticate.o cmd-capability.o cmd-check.o cmd-close.o cmd-copy.o cmd-create.o cmd-delete.o cmd-examine.o cmd-expunge.o cmd-fetch.o cmd-idle.o cmd-list.o cmd-login.o cmd-logout.o cmd-lsub.o cmd-namespace.o cmd-noop.o cmd-rename.o cmd-search.o cmd-select.o cmd-sort.o cmd-status.o cmd-store.o cmd-subscribe.o cmd-thread.o cmd-uid.o cmd-unselect.o cmd-unsubscribe.o client.o commands.o commands-util.o imap-expunge.o imap-fetch.o imap-fetch-body.o imap-messageset.o imap-search.o imap-sort.o imap-sync.o imap-thread.o mail-storage-callbacks.o main.o namespace.o -Wl,--export-dynamic ../lib-storage/register/libstorage-register.a ../lib-storage/index/libstorage_index.a ../lib-index/libindex.a ../lib-storage/libstorage.a ../lib-storage/subscription-file/libstorage_subscription_file.a ../lib-imap/libimap.a ../lib-mail/libmail.a ../lib-dict/libdict.a ../lib-charset/libcharset.a ../lib/liblib.a ../lib-storage/register/libstorage-register.a(mail-storage-register.o)(.text+0x7): In function `mail_storage_register_all': /usr/home/minotaur/Soft/dovecot-1.0.beta2/src/lib-storage/register/mail-storage-register.c:6: undefined reference to `yes_storage' *** Error code 1 Stop in /usr/home/minotaur/Soft/dovecot-1.0.beta2/src/imap. *** Error code 1 Stop in /usr/home/minotaur/Soft/dovecot-1.0.beta2/src. *** Error code 1 Stop in /usr/home/minotaur/Soft/dovecot-1.0.beta2. *** Error code 1 Stop in /usr/home/minotaur/Soft/dovecot-1.0.beta2. -- Kind Regards, Alexander Shikoff minotaur(a)crete.org.ua Mob.: +380 67 946 31 49

2 1

[Dovecot] beta3
by Pavel Volkovitskiy 08 Feb '06

08 Feb '06

Does any schedule exist for beta3? I'm now running stable snapshot from cvs, but i don't think it's a good thing, beta2 has memory leak in mysql code So what should i do? apply patch to beta2 or beta3 will be really soon? -- Pavel

1 0

[Dovecot] How to have a "public" readonly folder?
by Villalovos, John L 08 Feb '06

08 Feb '06

I searched the website and the mailing list and had difficulty finding an answer. I have my email users who are using dovecot-1.0.beta2. I also have setup a dummy account to get the Linux Kernel Mailing List (LKML) traffic. I would like to have it so that my IMAP users (maybe POP3 but don't need that) be able to read the LKML mailing list from that email account. I can put the email into an mbox or a maildir for the LKML mail. I have played around with the namespace and public option and I can't get it to work :( I tried this: namespace public { separator = / prefix = Public/ location = maildir:/home/virtemail/lkml/ } In my email client (Mozilla Thunderbird 1.5), I am unable to view the Public folder. If I select subscribe, I can see the Public folder but it is grayed out. Any ideas? Thanks, John

1 0

[Dovecot] Compilation problems (1.0-beta2)
by Jeff Dubin 07 Feb '06

07 Feb '06

Hi Folks, I'm running a minimal, textmode only install of FC4, and I'm trying to compile and install Dovecot 1.0-beta2. I keep getting the following error which I'm hoping someone here can help me troubleshoot. (...) /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -L/usr/local/ssl/lib -o dovecot auth-process.o askpass.o dict-process.o log.o login-process.o mail-process.o main.o master-settings.o syslog-util.o ssl-init.o ssl-init-gnutls.o ssl-init-openssl.o ../lib-settings/libsettings.a ../lib/liblib.a mkdir .libs gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -o dovecot auth-process.o askpass.o dict-process.o log.o login-process.o mail-process.o main.o master-settings.o syslog-util.o ssl-init.o ssl-init-gnutls.o ssl-init-openssl.o -L/usr/local/ssl/lib ../lib-settings/libsettings.a ../lib/liblib.a main.o(.text+0x127a): In function `main': /home/jdubin/apps/dovecot-1.0.beta2/src/master/main.c:778: undefined reference to `ssl_check_parameters_file' collect2: ld returned 1 exit status make[3]: *** [dovecot] Error 1 (...) So, I thought it's ssl related. I've compiled openssl (0.9.8a) from source as well (installed in default /usr/local/ssl), and set LDFLAGS=-L/usr/local/ssl/lib and CPPFLAGS=-I/usr/local/ssl/include, but no help. Here's what I'm doing: ./configure --without-pop3d --without-vpopmail --without-ipv6 --with-ssl=openssl make I've even tried to compile without ssl, but I still get that same error. What am I missing here? Perhaps I'm just making a typo somewhere, but I'm totally stumped. Thanks! Jeff

3 3

[Dovecot] Re: MySQL client out of memory error
by Roger Weeks 07 Feb '06

07 Feb '06

Alexander - We had this exact same issue with MySQL authentication. We resolved it by changing this entry in the auth section of the dovecot.conf: # Number of authentication processes to create #count = 1 We set count=20, and then through testing lowered it to count=10. This starts 10 auth-worker processes and to this point we have not had problems with the out of memory condition. -- Roger J. Weeks Systems & Network Administrator Mendocino Community Network Now offering DSL across California On Feb 7, 2006, at 2:00 AM, dovecot-request(a)dovecot.org wrote: > Message: 6 > Date: Tue, 7 Feb 2006 11:33:23 +0200 > From: Alexander Shikoff <minotaur(a)crete.org.ua> > Subject: [Dovecot] MySQL client out of memory error > To: dovecot(a)dovecot.org > Message-ID: <20060207093323.GA31385(a)crete.org.ua> > Content-Type: text/plain; charset=koi8-u > > Hi, > > I'm using Dovecot 1.0-alpha5 as POP3 server with MySQL DB of users. > Sometimes clients get an authentication errors. In this time dovecot > writes to log file next lines: > Feb 7 11:14:30 orion dovecot: auth-worker(default): sql > (user(a)mydomain.com.ua,192.168.3.36) Password query failed: MySQL > client run out of memory > Feb 7 11:14:30 orion dovecot: auth-worker(default): sql > (user(a)mydomain.com.ua,192.168.3.36) Password query failed: MySQL > client run out of memory > Feb 7 11:14:33 orion dovecot: auth-worker(default): sql > (user(a)mydomain.com.ua,192.168.3.36) Password query failed: MySQL > client run out of memory > Feb 7 11:14:33 orion dovecot: auth-worker(default): sql > (user(a)mydomain.com.ua,192.168.3.36) Password query failed: MySQL > client run out of memory > > Can anybody say is there a bug in dovecot or this this issue is > mysql-specific problem? > > Thanks in advance, Alexander > > -- > Kind Regards, Alexander Shikoff > minotaur(a)crete.org.ua

1 0

[Dovecot] Mixed IMAP/POP3 environment: further informations
by Denis Sbragion 07 Feb '06

07 Feb '06

Hello All, some further information. While waiting for some info I'm rolling back to UW and I discovered that if I delete the user "~/Maildir" automatically created by Dovecot, so including any index, the POP3 server works as expected. So it isn't the "Status" flag stored in the mbox file that prevents the download but some status information stored in the IMAP indexes created by Dovecot. I've retried this a couple of times to be sure. Does this helps? Bye, -- Denis Sbragion InfoTecna Tel: +39 0362 805396, Fax: +39 0362 805404 URL: http://www.infotecna.it

2 4

[Dovecot] Dovecot index issues (Solaris/Thunderbird)
by Mario Nigrovic-rvvk40 07 Feb '06

07 Feb '06

Folks - My setup is that my mail is filed (by procmail) in ~/.mail/Maildir, an NFS filesystem. But I'm running Dovecot (1.0alpha5) on my local machine (as myself on port 2143), just to serve this mail to my browser (Thunderbird 1.0.2). The NFS data is on a netapp which seems to be creating .nfs files LIKE CRAZY. I expect these are the remnants of lock files, so I'm trying to move my indexes onto local disk. To that end, I've created /var/tmp/mario/dovecot and put the following into my dovecot.conf: default_mail_env = maildir:%h/.mail/Maildir:INDEX=/var/tmp/mario/dovecot Dovecot happily makes index files, but then fails to serve some of my subscribed folders! Thunderbird is less than helpful in telling me what's going wrong, but dtmail shows that dovecot is reporting "out of sync" and a couple other errors (UID out of sequence), then closing the connection (for those folders). This may happen only after Thunderbird has tried to open the folder that I see these errors with dtmail: Dovecot ready. [UNSEEN 227] First unseen. [UIDNEXT 341] Predicted next UID IMAP connection broken (server response) No-op dead stream [CLOSED] No-op dead stream I've turned mmap off and set locking to fcntl. As a last resort, I've turned indexes off default_mail_env = maildir:%h/.mail/Maildir:INDEX=MEMORY but this makes thunderbird reload all headers every time I open a folder, which takes a very long time. Any suggestions? How do I debug this further? Mario

2 5

[Dovecot] error: mbox-sync-headers
by Ludwig Meyerhoff 07 Feb '06

07 Feb '06

Hallo! I installed dovecot at a customers and it is not working. Neither the 1.0.alpha4 (Debian testing) nor the 1.0.beta2 (Debian unstable) do. in /var/log/mail.err I get following error message over and over again: Feb 7 07:12:02 harmserv dovecot: imap(duerkop): file mbox-sync-rewrite.c: line 106 (mbox_sync_headers_add_space): assertion failed: (start_pos < data_size) Feb 7 07:12:02 harmserv dovecot: child 21001 (imap) killed with signal 6 Please notice the client reads the index but cannot access the contents themself! What does this errormessage mean, and how can I get rid of her? Saluti! Ludwig -- Open WebMail Project (http://openwebmail.org)

2 1

[Dovecot] passwd-userdb with args
by Thomas Wouters 07 Feb '06

07 Feb '06

I'm not sure why the 'passwd' userdb didn't allow args, but it meant (for instance) that the quota plugins weren't usable. I spent quite a bit of time trying to get my new quota-rquotad plugin to work, only to find out that it was my 'quota=rquotad:<filesystem list>' argument that wasn't being passed to the imap child :) The attached patch implements arguments for the 'passwd' userdb, just like it exists for the 'static' userdb (in fact, mostly copy-pasted from 'static'.) It doesn't try to avoid clashing with the values found in the passwd-struct, but I suspect it ends up overwriting them. That could probably be a feature ;) I don't use the passwd-file userdb, but that one would probably also enjoy being argified. -- Thomas Wouters <thomas(a)xs4all.net> Hi! I'm a .signature virus! copy me into your .signature file to help me spread!

2 1

Re: [Dovecot] MySQL client out of memory error
by Jakob Hirsch 07 Feb '06

07 Feb '06

Alexander Shikoff wrote: >> > Can anybody say is there a bug in dovecot or this this issue is >> > mysql-specific problem? >> There was a memory leak fixed in the mysql driver, so you might want to >> use the CVS current, wait for beta3 (better than use alphax, anyway), or >> fix it yourself (should be not that hard). > Thanks a lot! > /me is going to download one of the latest CVS snapshots. You are welcome. I'd say they are usually quite stable and a good way to check if your problem was fixed, even if you only look into the changelog. PS: Please keep list traffic on the list and honour other people's Reply-To header.

1 0

[Dovecot] auth: out of memory
by Branko F. Gračnar 07 Feb '06

07 Feb '06

Hello :) I just couldn't login to my dovecot imap (1.0-beta2). Dovecot authenticates from mysql database. Feb 6 19:47:33 elfstone dovecot: auth-worker(default_with_listener): sql(damirh(a)noviforum.si): User query failed: MySQL client run out of memory Feb 6 19:47:52 elfstone dovecot: auth-worker(default_with_listener): ^GOut of memory (Needed 8164 bytes) Feb 6 19:47:52 elfstone dovecot: auth-worker(default_with_listener): sql(bfg(a)noviforum.si): User query failed: MySQL client run out of memory Feb 6 19:48:19 elfstone dovecot: auth-worker(default_with_listener): ^GOut of memory (Needed 8164 bytes) Feb 6 19:48:19 elfstone dovecot: auth-worker(default_with_listener): sql(bfg(a)noviforum.si): User query failed: MySQL client run out of memory Feb 6 19:48:19 elfstone dovecot: auth-worker(default_with_listener): ^GOut of memory (Needed 8164 bytes) Restarting dovecot solved the problem. Ofcourse, machine didn't run into memory problems. Slackware 9.1, linux 2.6. Best regards, Brane

2 3

[Dovecot] MySQL client out of memory error
by Alexander Shikoff 07 Feb '06

07 Feb '06

Hi, I'm using Dovecot 1.0-alpha5 as POP3 server with MySQL DB of users. Sometimes clients get an authentication errors. In this time dovecot writes to log file next lines: Feb 7 11:14:30 orion dovecot: auth-worker(default): sql(user(a)mydomain.com.ua,192.168.3.36): Password query failed: MySQL client run out of memory Feb 7 11:14:30 orion dovecot: auth-worker(default): sql(user(a)mydomain.com.ua,192.168.3.36): Password query failed: MySQL client run out of memory Feb 7 11:14:33 orion dovecot: auth-worker(default): sql(user(a)mydomain.com.ua,192.168.3.36): Password query failed: MySQL client run out of memory Feb 7 11:14:33 orion dovecot: auth-worker(default): sql(user(a)mydomain.com.ua,192.168.3.36): Password query failed: MySQL client run out of memory Can anybody say is there a bug in dovecot or this this issue is mysql-specific problem? Thanks in advance, Alexander -- Kind Regards, Alexander Shikoff minotaur(a)crete.org.ua

2 1

[Dovecot] dovecot rpms, .subscriptions file, mbox to maildir
by Saurabh Barve 07 Feb '06

07 Feb '06

Hi, I am running dovecot 0.99-14 on a Fedora Core 2 machine. I had a few questions: 1) I wanted to upgrade to the dovecot-1.0 release. However, I am not sure if that's really required. dovecot-0.99-14 has been running very well for me for quite some time. Is there a real advantage to switching to the latest release. The reason I'm asking this is because: i) I don't have too many users to server - around 15 only. ii) My mail server is a pretty fast machine (~1 GHz, 1 GB RAM) machine, so hardware isn't too much of an issue. iii) I like to install software from rpm's. It's not that I can't install from source, but installing from rpm's makes it much easier for me. Just a personal preference. The version of dovecot that I am running was obtained from Dag Wieers web site. I haven't seen a newer version there. I've googled for rpm's for newer versions, and they are available, but I don't want to install it from some third party source that I don't know/trust. iv) I am also planning to support web mail for my users (probably through Squirrelmail). Are there any advantages/disadvantages to upgrading dovecot for that? v) People use Mozilla Mail, Mail.app, Thunderbird, Outlook, and Opera. Does the 1.0 version provide better integration with different mail clients (even though I understand that sometimes it's a problem with the client implementation). So, are there newer version of dovecot (1.0-stable) available in rpm formats which are guaranteed to be safe and un-trojaned? And is there any really good reason why I should upgrade to 1.0-stable? 2) My second question is about creating the .subscriptions (or subscriptions in 1.0) file. When I moved people over from using pine to using a mail client like Evolution/Thunderbird, I had to create .subscriptions/.mailboxlist file for them so that they could see the folders that they had created in pine. However, people still sometimes access e-mail using pine. They then create new folders in pine, which they are unable to see in their mail client. Is there a way around it? This occurs especially when people check their mail at the start of the month, and pine asks about saving/deleting old sent-mail folders, Trash folders. Is there a way to add these folders automagically to the .subscriptions file? 3) Would I be able to support web mail using mailboxes in mbox format, as I have them now? Or do I have to go for Maildir format? Since our university introduced web mail, they have had two sets of folders - one with capitalization (Sent, Deleted Messages, etc.) and one without (sent-mail, etc. - these were from our pine days). Is this due to web mail? Also, if I do need to convert from mbox to Maildir, what is the standard tool for doing that? I saw at least three different tools/scripts for doing that (mbox2maildir,mb2d,mb2md-2,mb2md.pl, .. ). Which tool (and from where) should I use to convert mailboxes without problems? Any help is greatly appreciated. Thanks in advance, Saurabh. ----- sa(a)atmos.colostate.edu

5 12

[Dovecot] Any change of integrating this patch???
by Tony Kay 07 Feb '06

07 Feb '06

There was a patch posted to fix dotfile folder names in this mail: http://www.dovecot.org/list/dovecot/2005-July/008127.html I have a web mail client (which stores preferences in a dot-file/folder through IMAP) and pine users (address book is a dot-folder in IMAP) that this affects. I can certainly hand-apply the patch, but I'd feel a lot more comfortable if this had some future in the real source. -- Anthony Kay University Computing Center (541) 346-1719 GPG Fingerprint: B0DB D46A 60AF FAE7 A94A 5075 0CB4 4D88 9F4F 7F09 I have earned my disillusionment.

1 0

[Dovecot] Newbie question
by Peter Lindgren 06 Feb '06

06 Feb '06

Hi, Finally I managed to build (as ordinary user in my home dir) 1.0b2. (remember, I had problems with db-ldap.h disappeared after compile) What is the (simplest and) safest way to shut down dovecot on the live server and replace the running 0.99.14? I run OpenBSD 3.7 on Sparc. The last step would be 'make install', of course. To shutdown dovecot the last time I resorted to kill processes but I felt I had missed something... the install page (http://wiki.dovecot.org/BasicInstall) says to kill it, it feels a little crude; no nicer signals to send? Bear with me, please... /Peter -- Peter Lindgren, dataingenjör E-post: peter "at" norrskenkonsult punkt com http://www.norrskenkonsult.com

1 0

[Dovecot] Shared maildirs
by Charles Marcus 06 Feb '06

06 Feb '06

Hi, This is the one thing holding me back from switching to Dovecot... Can anyone give a realistic timeframe for when Shred maildirs will be officially supported? Thanks... other than that missing piece, Dovecot rocks! Charles

6 15

[Dovecot] Panic: key not found from hash
by Hans-Jürgen Mehnert 06 Feb '06

06 Feb '06

Hello, we have about 120 servers doing some million mails per day. Most of them use dovecot for pop and imap. In version 1.0.alpha4 we have dovecot-crashes on one or two of the machines in a week where dovecot log says "Panic: key not found from hash" and dovecot dies. We tried version 1.0.beta2 on some machines but with that we have another problem where log says "Error: auth-worker(default): sql((USER),(IP)): Password query failed: MySQL client run out of memory" and the auth process dies. Couldn't find anything usefull on that on the net so i'll ask the list bevor i'll post a bug report. ==================== /etc/dovecot.conf ==================== # dovecot pop3 + imap config (rpm) # SG PN HJM 2005-09-09 ## Main protocols = imap imaps pop3 pop3s # protocols = pop3 pop3s ssl_disable = no ssl_cert_file = /etc/ssl/cert ssl_key_file = /etc/ssl/key disable_plaintext_auth = no log_path = /var/log/dovecot ## Login processes login_processes_count = 2 login_max_processes_count = 128 login_max_logging_users = 256 # Greeting message for clients. login_greeting = Dovecot ready. ## Mail processes max_mail_processes = 1024 verbose_proctitle = yes verbose_ssl = no first_valid_uid = 500 last_valid_uid = 0 first_valid_gid = 0 last_valid_gid = 0 mail_extra_groups = mail_debug = no #default_mail_env = #mail_save_crlf = no #mmap_disable = no #lock_method = fcntl #maildir_stat_dirs = no #maildir_copy_with_hardlinks = no #mbox_read_locks = fcntl #mbox_write_locks = dotlock fcntl #mbox_lock_timeout = 300 #mbox_dotlock_change_timeout = 30 #mbox_dirty_syncs = yes #mbox_very_dirty_syncs = no #mbox_lazy_writes = yes #umask = 0077 #mail_drop_priv_before_exec = no #mail_process_size = 256 #mail_log_prefix = "%Us(%u): " ## IMAP specific settings protocol imap { imap_max_line_length = 65536 login_greeting_capability = no imap_client_workarounds = outlook-idle mail_use_modules = yes mail_modules = /usr/lib/dovecot/imap } ## POP3 specific settings protocol pop3 { pop3_no_flag_updates = no pop3_enable_last = yes pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh mail_use_modules = yes mail_modules = /usr/lib/dovecot/pop3 } ## Authentication processes auth_verbose = no auth_debug = no auth_worker_max_count = 30 auth default { mechanisms = plain # SQL database - normal passdb sql { args = /etc/dovecot-sql.conf } # SQL database - normal userdb sql { args = /etc/dovecot-sql.conf } user = root count = 1 } ==================== /etc/dovecot-sql.conf ==================== driver = mysql connect = host=/var/lib/mysql/mysql.sock dbname=(DB) user=(DBUSER) password=(DBPWD) default_pass_scheme = CRYPT password_query = SELECT pwhash AS password, user FROM mail_mailboxes WHERE (user = '%n' AND active = 'Y' AND (type != 'smtp') AND (type = 'imap' OR '%s' = 'pop3')) OR (mainuser = '%n' AND user = CONCAT('%n','mail0') AND (type != 'smtp') AND (type = 'imap' OR '%s' = 'pop3')) user_query = SELECT location AS home, uid, gid, user AS system_user FROM mail_mailboxes WHERE (user = '%n') OR (mainuser = '%n' AND user = CONCAT('%n','mail0')) ==================== table structure ==================== CREATE TABLE mail_mailboxes ( mainuser varchar(128) NOT NULL default '', domain varchar(128) NOT NULL default '', user varchar(128) NOT NULL default '', addr varchar(128) NOT NULL default '', type set('pop3','imap','smtp') NOT NULL default 'pop3', active set('Y','N') NOT NULL default 'Y', pwhash varchar(255) NOT NULL default 'unset', quota int(11) NOT NULL default '0', location varchar(255) NOT NULL default 'unset', uid int(11) NOT NULL default '0', gid int(11) NOT NULL default '0', PRIMARY KEY (user) ) TYPE=MyISAM;

2 1

[Dovecot] Mixed IMAP/POP3 environment and message status flags
by Denis Sbragion 06 Feb '06

06 Feb '06

Hello All, I'm trying to migrate from UW Imap to Dovecot (latest 1.0 beta 2). The target is to go from the actual environment (Eudora + POP3) to a web based IMAP environment (IMAP + SquirrelMail). While migrating we will need to keep both environments for some time, with users having both the ability to use Eudora through POP3 while in the office and also the ability to check e-mail using the web based interface from time to time when they are out of office. Everything seems to work pretty well except for one little quirk. Whenever new mail messages are checked on-line through IMAP they are marked with "Status: O" or "Status: RO" in the main INBOX file (which is kept in the old mbox format now, and is one of the many reasons for the Dovecort choice). This is correct following the RFC standards but after that the POP3 server seems to completely ignore any message marked as "O" or "RO", making it impossible to download previously seen/read messages through Eudora. I've checked any available Eudora and Dovecot setting, including the pop3_no_flag_updates flag, but so far nothing worked. Looking at mailing list archives it looks like this behaviour is intentional and has been introduced to work around some problems with Eudora when the "Leave mail on server" option is enabled. Nevertheless it seems there's still something wrong. UW Imap seems to get this right, it lets Eudora download the already read message, which are correctly downloaded already marked as read. I haven't been able to identify the source of the problem, i.e. if it is either an Eudora problem which UW circumvent in some way or a real Dovecot problem. I'd really like to move to Dovecot, which provides many feature which are really useful for our situation, expecially maildir folders, which are fast and much more "differential backup" friendly than single file mailboxes. Unfortunately this IMAP/POP3 interaction problem would be a major showstopper because it will prevent a smooth migration from the old environment to the new one. Any hint about this issue? Anybody faced a similar problem so far? Thanks in advance for any help, and my compliments for the excellent job performed so far. Dovecot seems to be the right tool to fill the gap between the simpler UW and the Cyrus monster. Keep on going! :) Bye, -- Denis Sbragion InfoTecna Tel: +39 0362 805396, Fax: +39 0362 805404 URL: http://www.infotecna.it

1 0

[Dovecot] dovecot-cvs/mysql-5.0.18 OLD/PASSWORD problem
by John Wong 06 Feb '06

06 Feb '06

i use openbsd/i386, dovecot-cvs(today), mysql-5.0.18 today, i change the mysql_dbuser_password form OLD_PASSWORD to PASSWORD then dovecot can't connect to mysql-server shell$> mysql -u root -p mysql$> SET PASSWORD FOR 'db_user'@'localhost' = PASSWORD('db_pw'); now, dovecot CAN NOT connect to mysql-server shell$> mysql -u root -p mysql$> SET PASSWORD FOR 'db_user'@'localhost' = OLD_PASSWORD('db_pw'); now, dovecot CAN connect to mysql-server and everything work fine i patched src/lib-sql/driver-mysql.c to test, use something like: i_error("host(%s), db->user(%s), db->password(%s), db->dbname(%s) ....); before mysql_real_connect(), then see the maillog, the db->user/password/dbname is correct maillog: auth-worker(default): conn->mysql is NOT NULL auth-worker(default): host((null)), db->user(db_user), db->password(db_pw), db->dbname(dbname), db->port(0), unix_socket(/mysql.sock), db->client_flags(0) auth-worker(default): failed: (1) auth-worker(default): mysql: Connect failed to (null) (dbname): Access denied for user 'db_user'@'localhost' (using password: YES) - waiting for 1 seconds before retry i wrote a small c program to test, it can success connect to mysql, use same user/password/dbname, with both OLD_PASSWORD/PASSWORD why dovecot can't to connect to mysql-server with PASSWORD? help please, thank you base_dir = /var/dovecot/ ssl_cert_file = /etc/ssl/certs/mail.crt ssl_key_file = /etc/ssl/private/mail.key disable_plaintext_auth = no login_dir = /var/dovecot/login login_user = _dovecot valid_chroot_dirs = /var/spool/postfix/var default_mail_env = maildir:%h/%u mmap_no_write = yes protocol imap { imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } protocol pop3 { pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } auth default { mechanisms = plain passdb sql { args = /etc/dovecot-sql.conf } userdb static { args = uid=32765 gid=32765 home=/var/spool/postfix/var/./mail } user = _dovecot-auth chroot = /var/dovecot/auth socket listen { client { path = /var/spool/postfix/private/dovecot-auth mode = 0600 user = _postfix } } } driver = mysql connect = host=/mysql.sock dbname=dbname user=db_user password=db_pw default_pass_scheme = PLAIN-MD5 password_query = SELECT password FROM users WHERE userid = '%n' AND %Ls = '1' AND active = '1' --- src/lib-sql/driver-mysql.c.orig Mon Feb 6 23:07:42 2006 +++ src/lib-sql/driver-mysql.c Mon Feb 6 23:39:36 2006 @@ -112,11 +112,17 @@ } alarm(MYSQL_CONNECT_FAILURE_TIMEOUT); + i_error("conn->mysql is %s NULL", conn->mysql == NULL ? "" : "NOT"); + i_error("host(%s), db->user(%s), db->password(%s), db->dbname(%s), " + "db->port(%u), unix_socket(%s), db->client_flags(%u)", + host, db->user, db->password, db->dbname, db->port, unix_socket, + db->client_flags); failed = mysql_real_connect(conn->mysql, host, db->user, db->password, db->dbname, db->port, unix_socket, db->client_flags) == NULL; alarm(0); if (failed) { + i_error("failed: (%i)", (int)failed); if (conn->connect_failure_count > 0) { /* increase delay between reconnections to this server */

1 0

[Dovecot] nearly there
by ohp＠pyrenet.fr 05 Feb '06

05 Feb '06

Hi Timo et all. At last I found with unix socket wouldn't connect and it works now. However after auth, imap crashes with signal 6. This happens on 1 machine, the other (unixware too) work fine. The stack trace doesn't make much sense here it is anway... Core image of imap (process p1) created CORE FILE [makedev in cmd-status.c(a)sys/mkdev.h] SIGNALED 8 (fpe code[FPE_INTDIV] address[0x804e38b]) in p1 76: return __makedev(ver, maj, min); debug> Stack Trace for p1, Program imap *[0] makedev(maj=16, min=1, presumed: 0x8094258) [cmd-status.c@sys/mkdev.h@76] [1] cmd_store(cmd=0x0, presumed: 0x1, 0x80947a0) [cmd-store.c@139] [2] _cmd_select_full(cmd=0x8072498, readonly=false) [cmd-select.c@84] [3] cmd_store(cmd=0x10, presumed: 0x807d184, 0x8047cac) [cmd-store.c@74] [4] minor(dev=134511756, presumed: 0x8055266, 0x8047cac) [cmd-subscribe.c@sys/mkdev.h@112] [5] imap_search_args_build(pool=0x8047cac, box=0x8047cb4, args=0x8047ca0, error_r=0x804ebc1) [imap-search.c@416] [6] imap_search_get_uidset_arg(pool=0x1, box=0x8047cac, uidset="\215}\004\b\235}\004\b\245}\004\b\020\220\b\b\313}\004\b\335}\004\b\357}\004\b", arg_r=0x0, error_r=0x0, 0x1) [imap-search.c@447] [7] cmd_append_cancel(ctx=0x8047cb4, nonsync=true, presumed: 0) [cmd-append.c@158] [8] ?() [0] debug> The log says Trying to allocate 0 bytes and imap gets killed. Does it ring any bells? -- Olivier PRENANT Tel: +33-5-61-50-97-00 (Work) 15, Chemin des Monges +33-5-61-50-97-01 (Fax) 31190 AUTERIVE +33-6-07-63-80-64 (GSM) FRANCE Email: ohp(a)pyrenet.fr ------------------------------------------------------------------------------ Make your life a dream, make your dream a reality. (St Exupery)

2 2