- dovecot - dovecot.org

[Dovecot] dovecot 1.0alpha 4 error
by Alex Campoe 11 Nov '05

11 Nov '05

I tried to research this but could not find anything. Apologies if someone already reported this issue. I was running alpha 3 on Solaris 9, and having some timeout issues on lasge mailboxes. Decided to upgrade to rc4 before tweaking anything else. On rc4, when I try to start dovecot, I am getting: dovecot: Nov 10 14:04:56 Info: Dovecot v1.0.alpha4 starting up dovecot: Nov 10 14:04:57 Error: child 18805 (auth) returned error 89 dovecot: Nov 10 14:04:57 Error: Auth process died too early - shutting down dovecot: Nov 10 14:04:57 Error: auth(default): Unknown userdb driver 'passdb' No changes on .conf file. Works fine with rc3. Did I miss something? Alex -- -- Alex Campoe, CISSP Information Security Manager -- -- Associate Director, Systems -- -- Email: campoe(a)usf.edu Phone: (813) 974-1796 -- -- Academic Computing University of South Florida -- -----------------------------------------------------------------------

2 1

[Dovecot] dovecot-example.conf error with POP3 UIDL format?
by Shayne Hardesty 11 Nov '05

11 Nov '05

I just installed dovecot 1.0alpha4 on a very busy RHEL4 server with about 1300 users. So far so good, except for the dreaded duplicate emails in outlook for users who use POP3 and have "leave message on server" selected. After searching the archives I found that this is usually related to the UIDL format. The example in the .conf file is this: / # If you want UIDL compatibility with other POP3 servers, use: # UW's ipop3d : %08Xv%08Xu / Note that 'v' comes first, then 'u'.. But, right under it, is this: / # Note that Outlook 2003 seems to have problems with %v.%u format which was # Dovecot's default, so if you're building a new server it would be a good # idea to change this. %08Xu%08Xv should be pretty fail-safe. / In this example (and the next example just under it) 'u' comes first, then 'v'. So is the first example right, in that %08Xv%08Xu is compatible with UW ipop3d, but not outlook? Or is the UW ipop3d example a mistake? For what it's worth %08Xu%08Xv seems to have fixed my users' duplication problems. Shayne

1 0

[Dovecot] dovecot dead but subsys locked
by Kai Wang 10 Nov '05

10 Nov '05

I'm running dovecot 20051026 version on Redhat4. I tried to do a stress test. However dovecot dies after I login a few hundred users. I have some error messages in my mail log and am not sure if they are related to the problem. [root@lms2 imap1505]# service dovecot status dovecot dead but subsys locked Nov 10 12:58:52 lms2 dovecot: imap1514 [IMAP 7593]: mbox sync: UID inserted in the middle of mailbox /fs202/imap1514/mbox (371 > 39) Nov 10 12:58:52 lms2 dovecot: imap1514 [IMAP 7593]: X-IMAPbase uid-last unexpectedly lost in mbox file /fs202/imap1514/mbox Nov 10 13:02:23 lms2 dovecot: imap2011 [IMAP 7502]: UIDs broken with partial sync in mbox file /fs201/imap2011/mbox Nov 10 13:02:23 lms2 dovecot: imap2011 [IMAP 7502]: mbox sync: UID inserted in the middle of mailbox /fs201/imap2011/mbox (33 > 6) Nov 10 13:04:11 lms2 dovecot: imap2011 [IMAP 7502]: mbox sync: UID inserted in the middle of mailbox /fs201/imap2011/mbox (52 > 6) Nov 10 13:07:38 lms2 dovecot: imap2011 [IMAP 7502]: X-IMAPbase uid-last unexpectedly lost in mbox file /fs201/imap2011/mbox Nov 10 13:08:10 lms2 dovecot: imap0501 [IMAP 7222]: X-IMAPbase uid-last unexpectedly lost in mbox file /fs203/imap0501/mbox Nov 10 13:24:37 lms2 dovecot: imap2009 [IMAP 10253]: X-IMAPbase uid-last unexpectedly lost in mbox file /fs205/imap2009/mbox Nov 10 13:27:48 lms2 dovecot: imap2520 [IMAP 10548]: X-IMAPbase uid-last unexpectedly lost in mbox file /fs206/imap2520/mbox -- Kai Wang System Services Information Technologies, University of Calgary, 2500 University Drive, N.W., Calgary, Alberta, Canada T2N 1N4 Phone (403) 220-2423, Fax (403) 282-9361

1 0

[Dovecot] diferent login
by Leopoldo Lara Vázquez 10 Nov '05

10 Nov '05

Hi: I want to set up a system where all user can login in pop, but only a few in imap. I use pam auth. It's posible? Thanks.

2 1

[Dovecot] Cant log in to my new install :(
by Peter Church 10 Nov '05

10 Nov '05

Hi, I have just built a copy of dovecot on my sparc based solaris box. I now have dovecot running but when I try to log in using thunderbird or the solaris default package I get bombed out and the following error is generated.... dovecot: Nov 09 21:42:57 Error: child 20780 (imap) returned error 89 dovecot: Nov 09 21:42:57 Error: imap(ppchurch): flock() locks not supported I have set the lock method to fcntl and restarted dovecot but I still get the same error ... anybody else seen this before? Thanks Peter

2 1

[Dovecot] More informations on mysql bug
by Pierre Laplante 10 Nov '05

10 Nov '05

/bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/kerberos/include -o dovecot-auth auth.o auth-cache.o auth-client-connection.o auth-master-connection.o auth-master-listener.o auth-module.o auth-request.o auth-request-handler.o auth-stream.o auth-worker-client.o auth-worker-server.o db-ldap.o db-sql.o db-passwd-file.o main.o mech.o mech-anonymous.o mech-plain.o mech-login.o mech-cram-md5.o mech-digest-md5.o mech-ntlm.o mech-rpa.o mech-apop.o passdb.o passdb-blocking.o passdb-bsdauth.o passdb-cache.o passdb-ldap.o passdb-passwd.o passdb-passwd-file.o passdb-pam.o passdb-checkpassword.o passdb-shadow.o passdb-vpopmail.o passdb-sql.o userdb.o userdb-blocking.o userdb-ldap.o userdb-passwd.o userdb-passwd-file.o userdb-prefetch.o userdb-static.o userdb-vpopmail.o userdb-sql.o libpassword.a ../lib-settings/libsettings.a ../lib-ntlm/libntlm.a ../lib-sql/libsql.a ../lib/liblib.a -lcrypt -lpam -L/usr/local/mysql/lib/mysql -lmysqlclient -lz -export-dynamic -ldl gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -I/usr/kerberos/include -o dovecot-auth auth.o auth-cache.o auth-client-connection.o auth-master-connection.o auth-master-listener.o auth-module.o auth-request.o auth-request-handler.o auth-stream.o auth-worker-client.o auth-worker-server.o db-ldap.o db-sql.o db-passwd-file.o main.o mech.o mech-anonymous.o mech-plain.o mech-login.o mech-cram-md5.o mech-digest-md5.o mech-ntlm.o mech-rpa.o mech-apop.o passdb.o passdb-blocking.o passdb-bsdauth.o passdb-cache.o passdb-ldap.o passdb-passwd.o passdb-passwd-file.o passdb-pam.o passdb-checkpassword.o passdb-shadow.o passdb-vpopmail.o passdb-sql.o userdb.o userdb-blocking.o userdb-ldap.o userdb-passwd.o userdb-passwd-file.o userdb-prefetch.o userdb-static.o userdb-vpopmail.o userdb-sql.o -Wl,--export-dynamic libpassword.a ../lib-settings/libsettings.a ../lib-ntlm/libntlm.a ../lib-sql/libsql.a ../lib/liblib.a -lcrypt -lpam -L/usr/local/mysql/lib/mysql /usr/local/mysql/lib/mysql/libmysqlclient.so -lz -ldl The problem is with dovecot-auth. I modify the program main.c: #include "/usr/local/mysql/include/mysql/mysql.h" #include <stdio.h> #include "common.h" #include "buffer.h" #include "ioloop.h" #include "network.h" #include "lib-signals.h" #include "restrict-access.h" #include "fd-close-on-exec.h" #include "randgen.h" #include "password-scheme.h" #include "mech.h" #include "auth.h" #include "auth-request-handler.h" #include "auth-worker-server.h" #include "auth-worker-client.h" #include "auth-master-interface.h" #include "auth-master-listener.h" #include "auth-master-connection.h" #include "auth-client-connection.h" #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <syslog.h> #include <pwd.h> #include <grp.h> #include <sys/stat.h> struct ioloop *ioloop; int standalone = FALSE, worker = FALSE; time_t process_start_time; static struct auth *auth; static struct auth_worker_client *worker_client; main() { MYSQL *h; h = mysql_init (NULL); if (h == NULL) { fprintf (stderr, "mysql_init() failed (probably out of memory)\n"); exit(1); } if (mysql_real_connect ( h, /* pointer to connection handler */ "localhost", /* host to connect to */ "lyra", /* user name */ "teSIVIkY", /* password */ "lyra", /* database to use */ 0, /* port (use default) */ NULL, /* socket (use default) */ 0) /* flags (none) */ == NULL) { fprintf (stderr, "mysql_real_connect() failed:\nError %u (%s)\n", mysql_errno (h), mysql_error (h)); exit (1); } } This program is working outsine of dovecot. So its one of the library or the compilation itself that cause the problem of access denied. Any idea??? Thanks

1 0

[Dovecot] Moving from mbox to maildir?
by Patrick 09 Nov '05

09 Nov '05

Hi all, New to the list. I have an updated FC4 box with Dovecot version 0.99.14.4.fc4. My mbox size is about 76 megs and growing rapidly because of several high-volume mailing lists I'm subscribed to. I have noticed that over time the performance of the Evoluion/Spamassassin/Dovecot combo deteriorates. Someone on the Fedora users list suggested I have a look at moving to a maildir setup. Reading the docs I can't really figure out what to. Does anyone have a suggestion how I can safely move my mbox setup to a maildir setup? Much appreciated! Regards, Patrick

3 2

[Dovecot] mysql dovecot 1.0alpha4
by Pierre Laplante 09 Nov '05

09 Nov '05

I try to authenticate using mysql and I always get access denied. I wrote a program in C that connect to the database and it work. I put the code within driver-mysql.c and it failed!!! My question is do you set up anything (SSL?) that could explain this failure. thanks. Here is the code MYSQL *h; h = mysql_init (NULL); if (h == NULL) { fprintf (stderr, "mysql_init() failed (probably out of memory)\n"); exit(1); } if (mysql_real_connect ( h, /* pointer to connection handler */ "localhost", /* host to connect to */ "lyra", /* user name */ "xxxxxxx", /* password */ "lyra", /* database to use */ 0, /* port (use default) */ NULL, /* socket (use default) */ 0) /* flags (none) */ == NULL) { fprintf (stderr, "mysql_real_connect() failed:\nError %u (%s)\n", mysql_errno (h), mysql_error (h)); exit (1); }

1 0

[Dovecot] Problem with different case logins
by Roberto Suarez Soto 09 Nov '05

09 Nov '05

Hi, we have a system (Debian sarge) that uses LDAP for user authentication, via pam. We also have virtual users by using a static userdb [1], using the directory structure /var/lib/dovecot/postoffice/%u (i.e., a directory under /var/lib/dovecot/postoffice with the name of the user). The directory /var/lib/dovecot/postoffice belongs to postoffice:mail. IMAP folders, indexes and stuff go here; normal mail goes into /var/mail/%u. We are using dovecot 1.0alpha3 (upgrading to alpha4 soon). Today we've found a grave problem. Let's suppose you have the login "mylogin.domain.com". If you instead use the login "MYLOGIN.domain.com", the authentication works anyway (which is Ok), but dovecot creates a new directory under /var/lib/dovecot/postoffice with the different case, i.e., /var/lib/dovecot/postoffice/MYLOGIN.domain.com (which is not Ok). Afterwards, you can only access this new folder if you use the login with the caps. A new file (we're using mbox) under /var/mail/ with the new name is also created, though I don't understand yet how. We're using Postfix as MTA, and it always delivers to the lower case name. I hope you can understand the problem. If an user logs with a name with just one letter changed from lower case to upper case, all his/her folders and mail will be seemingly gone. Is this a bug or a feature? If the latter, is it possible to change this behaviour, or at least work around it? Thanks in advance. -- Roberto Suarez Soto Allenta Consulting robe(a)allenta.com www.allenta.com

3 5

[Dovecot] Ambiguous mail location setting
by snoop＠email.it 09 Nov '05

09 Nov '05

Using Dovecot v1.0.alpha4 on OpenBSD 3.8 (same problem find using Dovecot v1.0.alpha3 on OpenBSD 3.7) Log output: _________________________________ dovecot: Nov 04 11:15:28 Info: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 resp=AHl2cmlAbjN1dHJpbm4uaXQAeXVyaW6zgXRyaW1v dovecot: Nov 04 11:15:28 Info: auth(default): sql(myuser(a)mydomain.com,127.0.0.1): query: SELECT password FROM user_accounts WHERE username='myuser(a)mydomain.com' dovecot: Nov 04 11:15:28 Info: auth(default): client out: OK 1 user=myuser(a)mydomain.com dovecot: Nov 04 11:15:28 Info: auth(default): master in: REQUEST 5 32206 1 dovecot: Nov 04 11:15:28 Info: auth(default): sql(myuser(a)mydomain.com,127.0.0.1): SELECT '/var/mail/'||mailbox AS mail, uid, gid FROM user_accounts WHERE username='myuser(a)mydomain.com' dovecot: Nov 04 11:15:28 Info: auth(default): master out: USER 5 myuser(a)mydomain.com mail=/var/mail/mydomain.com/myuser uid=10001 gid=10001 dovecot: Nov 04 11:15:28 Error: imap(myuser(a)mydomain.com): Ambiguous mail location setting, don't know what to do with it: /var/mail/mydomain.com/myuser (try prefixing it with mbox: or maildir:) dovecot: Nov 04 11:15:28 Error: imap(myuser(a)mydomain.com): Failed to create storage with data: /var/mail/mydomain.com/myuser _________________________________ I verified that "default_mail_env" on my dovecot configuration file are "maildir:" correctly prefixed: "default_mail_env = maildir:/var/mail/%d/%n" and ... permissions of /var/mail/mydomain and /var/mail/mydomain/myuser are 2755 and owner is root:mail. I'm sure that isn't an authentication problem. I've tried some days to understand and to find over internet and here in the dovecot mailing list but I've not find a solution yet. I think it's a dovecot internal bug. Someone know what I'm talking about? -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: La tua vacanze in Trentino Alto Adige a prezzi last minute! * Pacchetti wellness, sport, famiglia ed enogastronomci a prezzi bassissimi! Clicca qui * Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=4089&d=9-11

1 0

[Dovecot] [OTAnn] Feedback
by shenanigans 09 Nov '05

09 Nov '05

I was interested in getting feedback from current mail group users. We have mirrored your mail list in a new application that provides a more aggregated and safe environment which utilizes the power of broadband. Roomity.com v 1.5 is a web 2.01 community webapp. Our newest version adds broadcast video and social networking such as favorite authors and an html editor. It?s free to join and any feedback would be appreciated. S. ------------------------------------------------------------------------------------------------------------------------------------------ Broadband interface (RIA) + mail box saftey = <a href="http://Dovecot_Discussion_List.roomity.com">Dovecot_Discussion_List.roomity.com</a> *Your* clubs, no sign up to read, ad supported; try broadband internet. ~~1131474877246~~ ------------------------------------------------------------------------------------------------------------------------------------------

3 2

[Dovecot] dovecot and passwd-file migration
by Erick Perez 09 Nov '05

09 Nov '05

Hi, Im using dovecot with passwd-file authentication and would like to provide some kind of interface/script to let the users change their password. currently my passwd-file looks like: user@domain.com:{PLAIN}password I would also like to change the password to the same I use in my Linux user(a)domain.com: {MD5}password ??? What do I need to change in the .conf? Las thing, I just cant find a RPM or Source RPM for dovecot compiled with MySQL support. Our office uses MySQL and not Postgres. doing rpmbuild --rebuild --with mysql to the .src.rpm of dovecot does not work. dovecot fails telling he has no idea of what mysql is. If I get a dovecot with mysql rpm I will move from passwd-file to Mysql auth. Thanks, -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

2 5

[Dovecot] dovecot crash after upgrade on FreeBSD
by Marko Lerota 08 Nov '05

08 Nov '05

Updated from ports collection from ver. dovecot-1.0.a3 to 1.0.a4_1. And it wan't work. Here's the log Nov 8 10:51:07 ot-group dovecot: Dovecot v1.0.alpha4 starting up Nov 8 10:51:08 ot-group dovecot: Auth process died too early - shutting down Nov 8 10:51:08 ot-group dovecot: auth(default): Unknown userdb driver 'passdb' Nov 8 10:51:08 ot-group dovecot: child 17872 (auth) returned error 89 -- One cannot sell the earth upon which the people walk Tacunka Witco

3 4

[Dovecot] error 89 Failed to create storage with data
by Nicolas 07 Nov '05

07 Nov '05

Hello, I have this error message in logs : dovecot: Nov 07 21:49:34 Error: POP3(manager(a)mydomain.com): Failed to create storage with data: manager(a)mydomain.com dovecot: Nov 07 21:49:34 Error: child 27834 (pop3) returned error 89 When I try to retrieve email of manager(a)mydomain.com kmail says there is no new message although this email box is not empty. I don't understand why. In my dovecot.conf I have default_mail_env = maildir:/home/Courrier/%d/%n with mutt on the server I can read all emails in /home/Courriel and for example : /home/Courrier/mydomain/manager/ Does anyone have an idea where I have to look for ? Thank you for your help and your response Nicolas

1 0

[Dovecot] 1.0alpha4 uploaded to Debian unstable
by Jaldhar H. Vyas 07 Nov '05

07 Nov '05

I finally got some free time and uploaded 1.0alpha4. It will arrive in the archive by tomorrow afternoon. Together with the most recent libssl0.9.8 upgrade I think this will fix the SSL problems users have been facing. -- Jaldhar H. Vyas <jaldhar(a)debian.org> La Salle Debain - http://www.braincells.com/debian/

4 7

[Dovecot] major pop3+ldap problem with alpha3 and alpha4
by Udo Rader 07 Nov '05

07 Nov '05

hi, For some of our customers we provide a pop3 access, and after an upgrade to alpha3, it is not working anymore. All of our data is ldap based and everything is working as before for our IMAP customers, but our POP3 users fail. Obviously the pop3 login process does not read the data correctly that comes from ldap. after enabling mail_debug, I saw the following error in our log: --------CUT-------- dovecot: Nov 02 18:01:32 Info: pop3(some.one.at.work): mbox: data=/virtual/at.work/home/some.one/mail/:INBOX=/var/mail/some.one.at.work --------CUT-------- The INBOX should be /virtual/at.work/var/mail/some.one.at.work, yet the POP3 process obviously uses the default_mail_env settings. the relevant line in our dovecot-ldap configuration looks like this: -------CUT-------- user_attrs = uid,homeDirectory,MailMessageStore,,uidNumber,gidNumber -------CUT-------- As I said, the IMAP process uses the ldap data correctly. any ideas? Udo -- bestsolution.at EDV Systemhaus GmbH http://www.bestsolution.at

1 2

[Dovecot] deleteing e-Mail, quota and dovecot
by Götz Reinicke 07 Nov '05

07 Nov '05

Hi, we run a RHEL4 E-Mail-Server with dovecot-0.99.11-2.EL4.1. we use mbox and most users use imap. So I have set quota for the devices where the user mailfiles are saved. No I'm getting the situation, that users exide there quota but yet not the grace limit and the user isn't able to delete messages. e.g. the the soft limit is 100 MB, the hard limit is 110 MB. So there should be some space to delete unneeded emails. Am i thinking the wrong way? Or how should the quota-system work in this situation? Thanks for any ideas! Regard Götz -- Götz Reinicke IT Koordinator - IT OfficeNet Tel. +49 (0) 7141 - 969 420 Fax +49 (0) 7141 - 969 55 420 goetz.reinicke(a)filmakademie.de Filmakademie Baden-Württemberg Mathildenstr. 20 71638 Ludwigsburg www.filmakademie.de

1 0

[Dovecot] Setup help
by Patrick Ernst 06 Nov '05

06 Nov '05

I'd previously had dovecot running on a Debian server but recently migrated to Suse. The nice, simple setup for dovecot on debian is not as easy using the dovecot sources. My lack of experience I'm afraid! I'd like to continue to use dovecot, especially as my current maildir directories are all set up ready to be use again. On suse (sles9) I have users authenticating by LDAP. In /var/log/dovecot I am getting errors like dovecot: Oct 27 22:17:41 Warning: Killed with signal 2 dovecot: Oct 27 22:28:03 Error: auth(default): LDAP: ldap_simple_bind_s() failed (dn uid=dovecot,ou=people,dc=aro,dc=home): Protocol error The errors also include the same LDAP error but with signal 11 or 15 I cannot get dovecot working. I've tried the 1.0 alpah and also found an earlier version on the suse 10 DVD. Basically I'm looking to use the IMAP server to centrally store emails on our home/business server. Previously we've been downloading mails (POP) from various mail accounts and moving them to dovecot (debian). In the future, I'd like to use fetchmail to do this part and locally deliver mail. My LDAP domain base is dc=aro,dc=home. I generally use this as the local mail/DNS domain as well. I have edited both /usr/local/etc/dovecot.conf and dovecot-ldap.conf. When I run dovecot it fails to start. I wonder if someone, in fairly broad ters could give me the steps for getting dovecot running with LDAP authenticated users? Regards Patrick

2 1

[Dovecot] cache
by Lucas 05 Nov '05

05 Nov '05

Hi, I just update from 0.99 to 1.alpha4. I combined with squirrel since several years ago and all was like a charm. Now dovecot is like catching mails. I explain: - I sent an email to my account. I login to webmail and I could see the mail. - Then, I check my mail with an email client through pop3 (vpopmail). - After that the mail isnŽt in the server, but in the webmail appears one msg in Inbox folder and the header. When click to see the msg an error ocurred: Query: FETCH 1 (FLAGS BODYSTRUCTURE) I try this in my config file: mail_never_cache_fields = flags date.sent date.received size.virtual size.physical mime.parts imap.body imap.bodystructure But no success :( Thank you in advance, Lucas

1 0

[Dovecot] forcing a default namespace
by Glenn Leavell 04 Nov '05

04 Nov '05

According to the Dovecot documentation, a "default namespace" is defined by simply configuring the namespace with an empty prefix, as in: namespace private { separator = / prefix = inbox = yes hidden = no } But my experience has been that this doesn't provide a true default, and that this namespace will only be selected when the client actually provides an empty ("") prefix. Is there a way to configure a default namespace that will always be chosen no matter what prefix the client provides, as long as there isn't an explicit match? I'd like to be able to have clients find mailboxes in a particular location no matter what they provide as their folder prefix. Thanks very much, -- Glenn Leavell <glenn(a)usg.edu> Office of Information and Instructional Technology Board of Regents of the University System of Georgia

1 0

[Dovecot] Dovecot 1.0a4 + pam + winbind ?
by Stephen Lee 04 Nov '05

04 Nov '05

Hi, I would like dovecot/pop3 to authenticate against a Windows ADS server. I've got authentication working for Samba and ssh using pam_winbind.so. Here's what my /etc/pam.d/dovecot file looks like: #%PAM-1.0 auth sufficient pam_winbind.so #auth required pam_nologin.so auth required pam_stack.so service=system-auth account required pam_stack.so service=system-auth account sufficient pam_winbind.so session required pam_stack.so service=system-auth session sufficient pam_winbind.so and this is what a portion of the dovecot.conf file looks like: auth default { # Space separated list of wanted authentication mechanisms: # plain digest-md5 cram-md5 apop anonymous mechanisms = plain passdb pam { args = dovecot } userdb passwd { } user = root } To get SSH to authenticate against ADS, the user name has to be prefaced with the domain name like "domain\user1". This is what I get when I attempt to login to Dovecot via Outlook/pop3 with the same naming scheme: Nov 3 20:09:45 server2 dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.0.3 rip=192.168.0.227 resp=AHZjXGpvYW5uZQBqb2FubmU= Nov 3 20:09:45 server2 dovecot: auth(default): plain(domain\user1,192.168.0.227): Username contains disallowed characters Nov 3 20:09:46 server2 dovecot: auth(default): client out: FAIL 1 user=domain\user1 Nov 3 20:09:46 server2 dovecot: pop3-login: Disconnected: user=<domain\user1>, method=PLAIN, rip=192.168.0.227, lip=192.168.0.3 Dovecot does not like the "\" character and I'm note sure authentication gets past that step to get to the pam phase. Any experiences and suggestions with Dovecot authentication against Windows Active Directory? Thanks, Stephen

3 2

[Dovecot] courier2dovecot migration script
by Arto Bendiken 03 Nov '05

03 Nov '05

Howdy, I've just migrated a couple of servers to Dovecot, and am loving it so far. I thought I'd share the courier2dovecot shell script I whipped together (based on the instructions I found in the wiki.dovecot.org migration how-to), for converting Courier-IMAP maildirs to Dovecot format. It can be downloaded from my home page: http://bendiken.net/scripts/ While the script is rather simple, it can save a fair bit of typing when migrating some hundreds of mail accounts... especially since Courier stores some of its own state files recursively in each folder of the maildir hierarchy, making it a real pain to otherwise manually rename or remove all of them. Here's a plain-English summary of what the script currently does, when given a Courier maildir path as an argument: - check that the given path is indeed a valid Courier maildir, and exit if not - rename the file 'courierimapsubscribed' to 'subscriptions', and strip the 'INBOX.' prefix from its contents - recursively rename all of files of the name 'courierimapuiddb' to 'dovecot-uidlist' - recursively delete all of files of the name 'courierimaphieracl', 'courierimapacl' and 'courierimapkeywords' The script will also verbosely print out each action it does, handy for redirecting the output to a log file for a large migration. I hope people about to jump ship from Courier to Dovecot find this useful. If anyone comes up with improvements to the script, please send them my way :-) Arto

2 1

[Dovecot] Ambiguous ..... problem using Dovecot v1.0.alpha4 on OpenBSD 3.8
by snoop＠email.it 03 Nov '05

03 Nov '05

I verified that "default_mail_env" on my dovecot configuration file are "maildir:" correctly prefixed and ... permissions of /var/mail/mydomain and /var/mail/mydomain/myuser are 2755 and owner is root:mail. Dovecot user is member of mail group. I'm sure that isn't an authentication problem. I've tried some days to understand and to find over internet but I've not find a solution and now ... doesn't want to work. Someone can help me? _________________________________ Log output: dovecot: Nov 03 20:20:39 Error: imap(myuser(a)mydomain.com): Ambiguous mail location setting, don't know what to do with it: /var/mail/mydomain.com/myuser (try prefixing it with mbox: or maildir:) dovecot: Nov 03 20:20:39 Error: imap(myuser(a)mydomain.com): Failed to create storage with data: /var/mail/mydomain.com/myuser -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Registrazione dominio, 500 MB per la posta elettronica, spazio web a partire da 2,92 Euro al mese e in pi� assistenza gratis! clicca qui Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=4079&d=3-11

1 0

[Dovecot] assertion problems w/ 1.0alpha4
by Jeremy Brown 03 Nov '05

03 Nov '05

Hey list, I have been using 0.99.14 for a while now but recently decided to try to upgrade to 1.0alpha4 to get the latest and greatest. I'm building from source myself on a Slackware 10.0 machine. Slackware ships with UW-IMAP configured to keep your inbox in /var/spool/mail and your other folders in ~/. I've been using the same setup for dovecot so that the migration is smooth...so my default_mail_env is set to: default_mail_env = mbox:~/:INBOX=/var/mail/%u I'm able to connect to both pop and imap servers and authenticate myself, but as soon as I attempt to get a listing of my emails my dovecot setting crashes with the following in the mail logs: Nov 3 10:52:40 shallowhal dovecot: imap(jeremy): file mail-index-sync-ext.c: line 155 (get_ext_header): assertion failed: (memcmp((char *)(ext_hdr + 1), ext->name, strlen(ext->name)) == 0) I can trigger this over POP3 just by logging in, then issuing "USER username", "PASS password", and then "LIST". Anyone experienced anything like this before? Any ideas on what might be going on? I can include more debug information (like my dovecot.conf file) if it would help. Jeremy

2 1

FW: [Dovecot] How to log POP3 events
by Cliff Hayes 03 Nov '05

03 Nov '05

Ok, I think I have that figured out. I made the following mods: disable_plaintext_auth = no pop3_uidl_format = %08Xu%08Xv and it seems to work. Now...about those enhanced logging capabilities. As promised, I see the enhanced logging. What does TOP and RETR mean? (I checked the manual first) Cliff -----Original Message----- From: Cliff Hayes [mailto:chayes@afo.net] Sent: Thursday, November 03, 2005 1:05 PM To: Chris Wakelin Subject: RE: [Dovecot] How to log POP3 events Logs say (with enhanced debugging turned on): Nov 3 12:58:38 sendmail dovecot: pop3-login: Login failed: Plaintext authentication disabled -----Original Message----- From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org]On Behalf Of Chris Wakelin Sent: Thursday, November 03, 2005 12:56 PM To: Cliff Hayes Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] How to log POP3 events Hmm, so what appears in the logs when you fail to authenticate? Have you tried the "debug" POP client :) ? telnet server 110 +OK University of Reading POP3 Server USER chris +OK PASS chrispassword +OK Logged in LIST 1 +OK 1 1234 QUIT +OK Logging out. Chris Cliff Hayes wrote: > Yes, that's what I have. I also found this: > > userdb prefetch { > } > > I must have missed that, so I commented that out and still had the same > problem. > > There is also this > > user = root > > in the auth default section. > > Cliff > > -----Original Message----- > From: dovecot-bounces(a)dovecot.org [mailto:dovecot-bounces@dovecot.org]On > Behalf Of Chris Wakelin > Sent: Thursday, November 03, 2005 11:27 AM > To: Cliff Hayes > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] How to log POP3 events > > > So what do you have for passdb and userdb? > > They should look something like > > auth default { > mechanisms = plain > > passdb shadow { > } > > userdb passwd { > } > > ... > > > (Earlier versions of 1.0, e.g. 1.0-stable, have just > > passdb shadow > userdb passwd > > ) > > Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

1 0

[Dovecot] How to log POP3 events
by Cliff Hayes 03 Nov '05

03 Nov '05

Hello all, Thanks for your help getting me started. I have Dovecot running now. When I troubleshoot customer email problems, I need to be able to see the number of emails they popped. In /var/log/maillog, Dovecot just tells me that they authenticated, but not what happened after they authenticated. With pop3d, I saw how many emails they popped. Can I set that in Dovecot? I checked the documentation and couldn't find anything. I also turned on the "auth_verbose = yes" and "auth_debug = yes" -- but as the name implies, I only got more authentication info. Nothing about files tranferred. Thanks, Cliff

3 10

[Dovecot] Vpopmail authentication problem
by [Mailclub] Laurent Bauer 03 Nov '05

03 Nov '05

Hello, I have a problem setting dovecot-1.0 / vpopmail authentication with virtual users. Here is my dovecot.conf (the part related to vpopmail) : passdb = vpopmail userdb = vpopmail default_mail_env = maildir:/home/domains/%d/users/%n I recompiled dovecot with "verbose" option and keep getting this error : Nov 3 11:10:58 ***** dovecot: auth(default): vpopmail(lb(a)mm.fr): unknown user (lb(a)mm.fr) whatever user/domain/password I am testing (including the correct one, of course) This is in src/auth/userdb-vpopmail.c line 35 : vpw = vauth_getpw(vpop_user, vpop_domain); According to the makefile, the binary was built with -L/home/vpopmail/lib and -I/home/vpopmail/include options ("standard" qmail/vmailmgr/vpopmail installation) so it should be ok ? I checked the permissions by setting a shell for vpopmail user, then 'su vpopmail' and read/write the password.cdb file. What could be wrong ? Has anybody got a sample config file / dovecot version working with vpopmail and virtual users, or an idea of what could be wrong in my config ? Thanks a lot. Laurent

1 0

[Dovecot] double posts
by Chris L. Franklin 02 Nov '05

02 Nov '05

Is any one else getting double posts from this list ? -- -- Chris L. Franklin -- ________________________________________________________________________ This email was scanned by the server at NomadCF.com, And has been deemed clean of invaild and or dangerous email attachment type and virus'. Although this is by no means a guarantee. ________________________________________________________________________

2 2

RE: [Dovecot] New Fedora/Sendmail Install Assistance
by Jakob Hirsch 02 Nov '05

02 Nov '05

Please keep list traffic on the list! Cliff Hayes wrote: > We are using Dovecot 0.99.14 Ok. Haven't used this for quite a while, so I don't know if I can really help you. > auth_userdb = passwd > auth_passdb = shadow Dovecot uses the homedir that's in your passwd then. But I wonder how you want to use IMAP. AFAIK, it needs a separate directory for every user anyway. At least the indexes etc. have to be stored somewhere. You should really read doc/mail-storages.txt: "mbox storage requires an IMAP root directory where to store IMAP folders and some other information..." I you can't provide a directory for every user, dovecot is probably not the software for you.

3 3

[Dovecot] Still corrupt indexes in 1A4
by Alen Salamun 02 Nov '05

02 Nov '05

Hello All! Well I still have users which almost daily get corrupt dovecot files in their IMAP folders (Maildir style) and are unable to read their mail in this particular folders. When I delete dovecot files in this folder (rm -rf dove*) user can again read all messages. This is regular Linux CentOS 4.2 with SAN storage (boot from SAN) as disks. So this is EXT3 on LVM. BUT it is VERY interesting that than happens only to two users which are connected to the server via slow links (reading via Thunderbird or Squirrelmail). It never happened (now for weeks) to other 10 users which use it localy or at home (on speedy links). It's very hard for me to exactly pinpoint the problem, since it never happens to me. But when it happened to one user again I asked him to send me screenshoot of it. I could see there that SquirrelMail said: "Warning: fgets() [function fgets]: SSL: fatal protocol error in /usr/share/squirrelmail/functions/imap_general.php on line 93." Examining this file this line is in function: --------SQUIRRELMAIL PHP SOURCE------------ /** * Custom fgets function: gets a line from the IMAP server, * no matter how big it may be. * @param stream imap_stream the stream to read from * @return string a line */ function sqimap_fgets($imap_stream) { $read = ''; $buffer = 4096; $results = ''; $offset = 0; while (strpos($results, "\r\n", $offset) === false) { if (!($read = fgets($imap_stream, $buffer))) {<- THIS IS LINE 93 /* this happens in case of an error */ /* reset $results because it's useless */ $results = false; break; } if ( $results != '' ) { $offset = strlen($results) - 1; } $results .= $read; } return $results; } } ------------------------------------------- Looks like dovecot drops connection or something. Well must be related to corrupt dovecot files in particular folder, since deleting them solves the problem. BR, Alen Salamun

2 3

[Dovecot] New Fedora/Sendmail Install Assistance
by Cliff Hayes 02 Nov '05

02 Nov '05

Hello everyone, I've narrowed down my problem, so this should be an easy one for some smart person out there. I am moving from an old sendmail/Fedora 2 box to a new sendmail/Fedora 4 box and want to try Dovecot for pop3. The problem is, I can't get it to work. I have 9000 email accounts I will be moving to the new box. I've already tried and failed once. The problem is, Dovecot wants a home directory for each one. We don't use home directories. So, when I try to pop one of the accounts that was moved over, /var/log/maillog shows: Nov 1 14:33:47 sendmail pop3(chayes): mkdir_parents(/home/chayes/mail/.imap/INBOX) failed: Permission denied Nov 1 14:33:47 sendmail pop3(chayes): Couldn't open INBOX: Internal error occured. Refer to server log for more information. [2005-11-01 14:33:47] -or- Nov 1 14:29:18 sendmail pop3(chayes): mbox: Can't create root IMAP folder /home/chayes/mail: Permission denied Nov 1 14:29:18 sendmail pop3(chayes): Failed to create storage with data: mbox:/var/spool/mail/chayes ******** But if I create folders /home/chayes/ and /home/chayes/mail with user and group set to chayes, then it works. By the way, I've tried about 20 different iterations of the default_mail_env parameter. This is the one I'm using at the moment: default_mail_env = mbox:/var/spool/mail/%u Bottom line is, if Dovecot has to have a home directory, then I guess I'll have to go back to pop3d, which doesn't. Thanks, Cliff

2 1

[Dovecot] 1.0.alpha4 released
by Timo Sirainen 02 Nov '05

02 Nov '05

The actual alpha4 release this time. With a few changes since the pre-release. The important changes again: - Default lock_method changed to flock instead of the old fcntl. Solaris users will need to set it back to fcntl. This makes sure that Dovecot's indexes aren't accidentally used with NFS. - IMAP: We might have sent extra EXPUNGE messages when output buffer got full. This could have caused various sorts of very bad behavior. This is the main reason why everyone should upgrade as soon as possible. - POP3: We sent duplicate replies for LIST command when output buffer got full. Probably caused Thunderbird's duplicate deletion bugs? (Although I thought someone checked that Dovecot's reply was correct when the bug occurred?) - pop3_uidl_format setting is now required to be explicitly set in configuration file for pop3 to work at all. I want to get rid of the old default setting which breaks Outlooks, and simply changing the default would break existing setups. - Multiple passdbs and userdbs of same type can now be added with different parameters. Some people asked about this earlier. - Authentication cache works now with other than SQL and LDAP passdbs. Some passdbs such as PAM require some additional settings to work. See example config file. - Some other fixes to authentication cache related to failure handling and non-plaintext authentication. - deny passdb wasn't working for non-plaintext authentication. New changes since alpha4 pre-release: - imap/pop3 proxy feature was broken - fixed an assert-crash in ostream-file.c that was only in the pre-release And some more changes since alpha3 that I didn't mention before: - zlib plugin updated in http://dovecot.org/patches/1.0/zlib-plugin.tar.gz to be much faster than before - Added ssl_username_from_cert setting. Not actually tested yet, does it work? - epoll was broken with 64bit systems - Added deny password databases. - Dovecot can be run from inetd again - Index breakage/crashfix related to adding new keywords

9 29

[Dovecot] Cannot build rpm with mysql support from dovecot.spec
by Erick Perez 02 Nov '05

02 Nov '05

I've been playing for hours with the dovecot.spec file to build --with-mysql. The resulting RPM builds fine but when dovecot runs it does not recognize the passdb mysql statement. I also noted that the spec file has a version of 1.0-stable and rpmbuild complains about an invalid '-' in the version. Being a newbie in rpmbuild, can someone assist me in building for CentOS 4 on i386? standard build options but --with-mysql added. I also tried to install it from sources and it does not work (at least for me). Being a RPM user now I have to clean what the source installation did and i have no clue where the 'make install' placed files. BTW I am trying to build a manual (pdf, html) with the following config and im only stuck with dovecot, the other daemons are ready. Target Server: CentOS 4 with apache, postfix, mysql, dovecot, openwebmail,clamav, clamd, php,zlib,openssh, webmin and samba. All virtual running from mysql where possible, no local users no local storage (all to the mysql db/tables). Not wanted: postgresql, courier,vpopmail,kerberos,sasl,ssl (that might be in manual v2.0 if 1.0 ever sees the light) The system does not have X (no need for fancy graphs) file used: http://www.dovecot.org/nightly/stable/dovecot-stable-20051102.tar.gz RPMs Used: All RPMs that can be located in the CentOS 4 CDs so new users (like me) can do as much as needed without downloading. Devel RPMs: All devel (mysql, pam, openssl) are installed and they are recognized at building time. Your help will be appreciated in this task. Thanks, -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

2 3

[Dovecot] failed to start
by Export TheGeek 02 Nov '05

02 Nov '05

greetings, I'm having a bit of trouble running dovecot, I receive the error; "Fatal: Can't create directory /usr/local/var/run/dovecot: No such file or directory" with an unmodified install save for disabling imap and allowing secure imap and pop3, I uncommented the base_dir in the .conf, although that did nothing. Does anybody have any suggestions? Many thanks, -Ex

2 1

[Dovecot] Error: auth(default): Unknown userdb type 'mysql'
by Erick Perez 02 Nov '05

02 Nov '05

Hi there, I have configured dovecot with mysql but when I restart (Redhat enterprise 4) the following error appears: dovecot: Nov 01 18:47:08 Info: Dovecot v1.0-stable starting up dovecot: Nov 01 18:47:09 Error: Auth process died too early - shutting down dovecot: Nov 01 18:47:09 Error: auth(default): Unknown userdb type 'mysql' dovecot: Nov 01 18:47:09 Error: child 30738 (auth) returned error 89 I have all RPMs for mysql installed, as well as mysql-devel. how can I verify that mysql support was correctly compiled in? sugestions? Thanks in advance.

1 0

[Dovecot] Problems with dual ldap auth
by Stian Jordet 01 Nov '05

01 Nov '05

Hi, I can't seem to figure this out. Is it impossible to use two different ldap auth? It works if I use one ldap and one pam, but I do need to use ldap for both. This is from my config: auth default { mechanisms = plain passdb ldap { args = /etc/dovecot/ldap-virtual.conf } passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } userdb ldap { args = /etc/dovecot/ldap-virtual.conf } userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } user = root #chroot = #count = 1 #ssl_require_client_cert = no } It works well if I only use one of them (so they seem to be correct), but together, only the last (dovecot-ldap) is used. Anyone see a reason for that? Best regards, Stian

2 3

[Dovecot] dovecot-lda - sieve notify support
by Sebastjan Trepca 01 Nov '05

01 Nov '05

Hi, does current implementation of dovecot-lda supports sieve script like this: require ["notify"]; if header :contains "from" "boss(a)example.org" { notify :high "This is probably very important"; } And if it does, what happens in this case ? Is there any configuration for other notification methods? I didn't notice anything in configuration file. Thanks, Sebastjan

1 0

[Dovecot] Usernames and Passwords for Virtual Users Request
by Matt 01 Nov '05

01 Nov '05

A feature I think would be nice. When a single IP hosts email for multiple domains the solution is usually to use the complete email address as the username. I have users that have migrated from Cobalt RAQ's which do not work like that. If a user trys to authenticate with just there username such as "joeb" instead of joeb(a)dirt.com I would like Dovecot to check all the domains it hosts and if it only finds one with the username "joeb" assume thats the one. If multiple domains have the username "joeb" refuse to authenticate without the "@domain" part. Perhaps this is not possible. Sure would be handy though. Oh, it would also be nice to automatically lowercase all usernames before authentication. Matt

4 4

[Dovecot] popa3d migration problem
by Janusz Batko 01 Nov '05

01 Nov '05

Hello, I tried to migrate from popa3d to dovecot but I couldn't manage with 'pop3_reuse_xuidl = yes' option. First of all it turned out that the feature is not supported in dovecot for Fedora Core 4 (dovecot-0.99.14-4.fc4). So I downloaded latest stable release of Dovecot but it didn't have this option included too. Then I compiled the newest alpha version (dovecot 1.0.alpha4) and I tried to login with 'pop3_reuse_xuidl = yes' option enabled and I've got in my logfile the following output: Nov 1 00:58:33 sneogg dovecot: pop3-login: Login: user=<test2>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Nov 1 00:58:33 sneogg dovecot: pop3(test2): Set pop3_uidl_format setting in config file Nov 1 00:58:33 sneogg dovecot: child 32067 (pop3) returned error 89 And my session was disconnected immediately each time after sucessful authentication.. I tried to set up pop3_uidl_format to MD5 (%m) but it didn't work... Let me ask if there is a possibility to migrate from popa3d to dovecot (by using a proper patch maybe?)? I'd thankful for any response... Janusz

3 3

[Dovecot] errors after 1.0a3 -> 1.0a4
by Jakob Hirsch 31 Oct '05

31 Oct '05

Hi, somebody else seeing these? Oct 21 09:14:06 ymmv dovecot: imap-login: Login: user=<xxxx>, method=CRAM-MD5, rip=84.162.151.124, lip=85.214.25.134, TLS Oct 21 09:14:07 ymmv dovecot: imap-login: epoll_ctl(): No such file or directory Oct 21 09:14:07 ymmv dovecot: child 11419 (login) returned error 89 mailbox access fails after that. Had this already yesterday, then downgraded to alpha3 and it worked again, upgraded again and it kept working. Strange thing is, access through squirrelmail works perfect, but using Thunderbird gives these errors. I'm using maildir with epoll and inotify, if that matters.

3 7

[Dovecot] login_user & first_valid_uid
by Alexander Shikoff 30 Oct '05

30 Oct '05

Hi all, I have next settings in .conf file ... # # Login user for SQL-based virtual users # login_user = dovecot first_valid_uid = 100 first_valid_gid = 100 ... System user dovecot has UID/GID = 101/101. But every time when user logins I see in log file Oct 29 15:51:25 orion dovecot: Logins with login process UID 101 (user elnino) not permitted (see login_user in config file). Oct 29 15:51:25 orion dovecot: auth(default): Growing pool 'plain_auth_request' with: 1024 Why dovecot generate these warnings and how I can get rid of them? Thanks in advance, Alexander -- Kind Regards, Alexander Shikoff minotaur(a)crete.org.ua

4 8

[Dovecot] [info] Spamcop listing
by /dev/rob0 30 Oct '05

30 Oct '05

Smtp1.song.fi and smtp2.song.fi, our list servers, seem to have gotten listed in the bl.spamcop.net RBL. Spamcop listings are temporary and will time out, and because of occasional major false positives (or perhaps collateral damage?) like this I don't use it to reject mail. Anyone who IS using Spamcop to reject mail has missed much of today's list traffic. -- mail to this address is discarded unless "/dev/rob0" or "not-spam" is in Subject: header

8 13

[Dovecot] Dovecot Alpha 4
by Marcus Don 30 Oct '05

30 Oct '05

Hi We've been using Dovecot as our primary IMAP and POP3 server for around 70,000 users for a couple of months now. On the whole, we've been very pleased with the performance of Dovecot - and are extremely grateful to the developers! However, we have had a few issues, some of which we have yet to resolve. We chose Dovecot because it was the only IMAP/POP3 server we could find that supported direct mysql authentication and both mboxes and maildirs. With exim as our main SMTP server, we were able to convert the inboxes and imap folders for all 70,000 users from mboxes to maildirs without any downtime whatsoever! For those who are interested, we have a cluster of 5 web/imap servers (running our own webmail software) and a further 5 pop servers all placed behind 2 Zeus load balancers and running RHEL 4 (actually CentOS 4.1). Storage is provided by an EMC Clariion device, which is mounted via NFS onto all servers in the cluster over gigabit ethernet. 1. index files The main problem has always been the index files becoming corrupted. This seems to have improved with the Alpha 4 release, but still happens for several users each day. Perhaps it would be possible for Dovecot to just delete index files and re-create them when they are corrupted, rather than just erroring? Also, how do you turn off index files altogether? Even when mail_never_cache_fields is set for all available fields, they still get created. Another issue relating to the index files is that, if a user is deleted and then another user created with the same name, dovecot doesn't have permissions to re-write the index files, because it has a different uid. So, whenever a user is deleted, we have to delete the index files from every machine in the cluster. We could store index files on the NFS device, but this would affect performance (and might cause locking problems). A better solution would be to make the uid one of the variables available in default_mail_env. By naming index files by uid rather than username, this wouldn't be an issue. 2. initgroups() We use an nss-mysql to store all non-administrative system users in a mysql database. We often encounter problems with applications that use the initgroups() function, since this returns all users and groups - which in our case returns masses of data from mysql. When using mysql (or ldap etc) for authentication, it would be useful if there were an option to prevent additional system lookups. At present, we have to comment out the following in /src/lib/restrict-access.c, or the server load goes through the roof: if (initgroups(env, gid) != 0) { i_fatal("initgroups(%s, %s) failed: %m", env, dec2str(gid)); } 3. base_dir permissions bug Since the alpha 4 release, it seems that the permissions dovecot automatically sets for the base_dir are not sufficient to allow the authentication user to access sockets, unless this user belongs to the same group as the login user - which is contrary to the instructions in the documentation. I'm pretty sure this is a bug, but perhaps someone could confirm. 4. authentication caching Also since the alpha 4 release, we have found that, once the authentication cache is full, all subsequent login attempts for users that haven't been cached return "password mismatch". I though this might be a conflict with nscd, but it happens whether nscd is running or not. So, for the time being, we have had to disable the authentication cache. I'd be very keen to hear from anyone who has any feedback on any of the points above. Thanks Marcus -- Marcus Don Applications Development Manager Namesco Limited Main Line: +44 (0)870 120 8888 Main Fax: +44 (0)870 120 8008 Tech Support: +44 (0)870 162 4950 Email: mdon(a)names.co.uk Website: http://www.names.co.uk Address: Acton House, Perdiswell Park, Worcester, WR3 7GD This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the sender immediately. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. Finally, the recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. ------------------------------------------------------------------------ --------------------------------------- | Free Dial-up - no need to register! | --------------------------------------- Namesco Limited provides Free dialup access to anyone that wishes to use it. You do not even have to be a customer, there is no need to register and is especially handy if you are unable to connect with your current provider. Simply use the following details: Dialup Number: 0844 535 2100* Username: namesco Password: easydialup * Local call rate charges apply, 33% Cheaper than BT's 0845 local call rate. If you need any help in configuring the Free Dial-up service on your computer, please do not hesitate to call us on 0870 162 4950.

4 4

[Dovecot] Dovecot RPMs for Redhat Enterprise 3 repository?
by Erick Perez 30 Oct '05

30 Oct '05

Where can I find RPMs for RHEL 3? -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

3 3

[Dovecot] Dovecot reports zero messages erroneously
by Chris Spiegel 29 Oct '05

29 Oct '05

On October 11, Mark Farmer reported a problem about not being able to see new mails. I'm running into the same issue. Even though cur/ and new/ contain messages, Dovecot reports that there aren't any. This problem seemed to start happening in alpha3 (and persists in alpha4). When I revert back to alpha2, the messages show up again. It looks like a problem with the dovecot.index* files. When I delete them, alpha4 can serve up the mails just fine, and will in fact keep working for a little while. Eventually (within a few hours, although I'm not sure what causes it), dovecot thinks things are empty again. Like Mark, I'm using Postfix.. I'm not sure if that has anything to do with the problem but I thought it'd be worth pointing out. If there are any specific things you'd like me to do to try to pin down this problem, let me know. Chris

2 4

[Dovecot] Some errors with 1.0.alpha4
by Nicolas STRANSKY 29 Oct '05

29 Oct '05

Hi, I'm getting three types of errors with latest Dovecot compiled for x86_64 GNU/Linux Debian. Oct 29 12:47:57 rouge imap-login: unable to dlopen /usr/lib/sasl2/libntlm.so.2: /usr/lib/sasl2/libntlm.so.2: failed to map segment from shared object: Cannot allocate memory Oct 29 12:47:57 rouge pop3-login: unable to dlopen /usr/lib/sasl2/libntlm.so.2: /usr/lib/sasl2/libntlm.so.2: failed to map segment from shared object: Cannot allocate memory I have no idea why there is this error, but it comes each time a user logs in, with no other severe effect. Oct 29 01:28:54 rouge dovecot: imap(glondu): pool_system_malloc(): Out of memory Oct 29 01:28:54 rouge dovecot: child 5642 (imap) returned error 83 (Out of memory) Oct 29 01:38:10 rouge dovecot: imap(glondu): pool_system_malloc(): Out of memory Oct 29 01:38:10 rouge dovecot: child 5639 (imap) returned error 83 (Out of memory) Oct 29 01:49:22 rouge dovecot: imap(glondu): pool_system_malloc(): Out of memory Oct 29 01:49:22 rouge dovecot: child 8839 (imap) returned error 83 (Out of memory) The mailbox for this user is not bigger that 10MB and dovecot mail_process_size is set to default setting so I don't see why there could be a "Out of memory" error. Oct 28 18:00:45 rouge dovecot: imap(vidal): Lost transaction log file /var/dovecot-indexes/vidal/.INBOX/dovecot.index.log seq 1 Oct 28 18:00:45 rouge dovecot: imap(vidal): Lost transaction log file /var/dovecot-indexes/vidal/.INBOX/dovecot.index.log seq 1 Oct 28 18:00:56 rouge dovecot: imap(vidal): Lost transaction log file /var/dovecot-indexes/vidal/.INBOX/dovecot.index.log seq 1 Oct 28 18:00:56 rouge dovecot: imap(vidal): Lost transaction log file /var/dovecot-indexes/vidal/.INBOX/dovecot.index.log seq 1 This error caused the user's mailbox to be unreadable, and erasing the indexes resolved the problem, but I would have expected Dovecot to have done it itself if the indexes were corrupted ? Hope this feedback helps, -- Nico

1 0

[Dovecot] Basic Configuration
by Ashvin Meetoo 29 Oct '05

29 Oct '05

Hi, Been setting up a backup mail server just in case... using FC4... basic configuration... postfix/dovecot... imap pop3... When I send an external email, example(a)gmail.com, everything works well. When I send an internal email, i.e. to another user, user receives a blank email? Everytime he clicks on get mail a new empty email is added... checked /<user>/Mailbox/new folder email is there and header is ok. What can be the matter? Did this thousand times before and even reinstalled FC4... same problem. Also, I have tried: echo test | mail root but mail gives me : No mail for root Help please. __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

1 0

[Dovecot] dovecot-lda cvs
by Rene Luria 28 Oct '05

28 Oct '05

I am using dovecot-lda from cvs (checked out on september the 21st) and dovecot 1.0alpha2 (not yet upgraded ok). I have a strange feeling about "redirect" feature. Let's see two sieve scripts examples: # ex1 require ["fileinto", "vacation"]; if header :is ["blabla"] "blabla" { fileinto "blabla"; } redirect "user(a)domain.com"; keep; # ex2 require ["fileinto", "vacation"]; redirect "user(a)domain.com"; keep; In both cases, I redirect mail to an external address, keeping a copy. (this would emulate redirect :copy "user(a)domain.com"; which is still not implemented). In first example I run a test on headers, but not on the second. The effect is that in the second example, the forwarded mail is "complete" (exactly the original one with routing header modified), but in the first one, the forwared mail is completely messed up: no Subject header, and so on. This could be because as tests are run on the incoming mail, the working in memory of the mail is changed, and then, forwarded. So when no tests are run, the mail remains intact. How can I deal with this ? Is there some nice hotfix that would prevent a few (like 100'000) users to kill me ? Best regards. -- Rene Luria

3 5

[Dovecot] 1.0alpha3: fcntl() complaints?
by Jeff A. Earickson 28 Oct '05

28 Oct '05

Hi, Since installing 1.0alpha3 this morning, I've seen this syslog complaint a few times. Anything to worry about? A "server too busy" issue? imap(user): fcntl() failed with mbox file /var/mail/user: Resource temporarily unavailable Jeff Earickson Colby College

2 4

[Dovecot] DoveCot 1.0a3 hangs at login
by Justin Finkelstein 28 Oct '05

28 Oct '05

I've just upgraded to 1.0a3 via a freebsd port, and I've begun to notice odd behaviour from Dovecot. After converting my config file settings over to the new format, everything runs fine for an hour or so, then dovecot stops responding: oot@toejamfootball# telnet localhost 143 Trying ::1... telnet: connect to address ::1: Connection refused Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK Dovecot ready. 1 login justin(a)redwiredesign.com password [dovecot then just stops doing anything] * BYE Disconnected for inactivity. Connection closed by foreign host. in the logs, it says: Oct 13 09:43:22 toejamfootball dovecot: imap-login: Disconnected: Inactivity: method=PLAIN, rip=192.168.2.11, lip=192.168.2.43 Oct 13 09:43:22 toejamfootball dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=192.168.2.43 rip=192.168.2.11 resp=AGp1c3RpbkByZWR3aXJlZGVzaWduLmNvLnVrAHBhc3N3b3Jk Oct 13 09:43:22 toejamfootball dovecot: auth-worker(default): sql(x,192.168.2.11): query: SELECT username AS user, MD5(clear) AS password FROM users LEFT JOIN domains ON domains.domain_id = users.domain_id WHERE domain="x" AND username="x" AND users.enabled = 1 AND domains.enabled = 1 Oct 13 09:43:22 toejamfootball dovecot: auth(default): pam(justin(a)x,192.168.2.11): pam_authenticate() failed: authentication error Any clues? I don't use pam for auth anyway, so I just ignore that. When I restart the server and login again it's fine. j.

2 1