- dovecot - dovecot.org

[Dovecot] dovecot deliver question
by Reuben Farrelly 17 May '05

17 May '05

Hi Timo, How much of the code base is shared between dovecot-lda and the dovecot CVS? I'm asking because when I tried out 'deliver' a few weeks ago I was seeing all sorts of nasty index corruption errors in the logs...and obviously lots of fixes have gone into core dovecot (but haven't seen many go into dovecot-lda) Reuben

2 1

[Dovecot] Dovecot-stable rpms
by Topher Fischer 17 May '05

17 May '05

I've been searching, and I can't find any rpms of dovecot stable for RHEL 4. Does anybody know where I can get one? Ever since we went from IMAP-UW to Dovecot, we've been having frequent problems with mbox corruption, and I've read that 1.0 fixes many of those types of problems. Has anybody else found an rpm for RHEL 4 of any Dovecot greater than 1.0? -- Topher Fischer System Administrator - TMCB 1140 GnuPG Fingerprint: 3597 1B8D C7A5 C5AF 2E19 EFF5 2FC3 BE99 D123 6674 javert42(a)cs.byu.edu

4 3

[Dovecot] Error in config
by Brent Clark 16 May '05

16 May '05

Hi Im trying dovecot for the first time, and I would like to get shared mail folders to work. I came acress this content (copied and pasted below). and the error I get is: Fatal: Error in configuration file /etc/dovecot/dovecot.conf line 204: Expecting '=' ===================================================== default_mail_env = maildir:~/Maildir namespace private { separator = / prefix = inbox = yes hidden = no } namespace public { separator = / prefix = Public/ location = maildir:/var/mail/public inbox = no hidden = no } namespace shared { separator = / prefix = Accounts/ location = maildir:/var/mail/accounts inbox = no hidden = no } =================================================== If anyone has and tips or advice etc, it would be most appreciated. Kind Regards Brent Clark

3 5

[Dovecot] Corrupted transaction log file, dotlocks..?
by John and Catherine Allen 16 May '05

16 May '05

I'm new to Dovecot but I've been able to get it up and running on a test basis without too much difficulty. I'm running dovecot-stable-20050508 with maildir, under Linux (an old Gentoo setup that's been stable for about 2,5 years). Mail client is Thunderbird. However, in the course of experimentally copying the accumulated household email (95000 emails from the last 10 years) from the existing IMAP server (UW-IMAP) using imapsync, I'm seeing some problems. While copying the 1000 or so messages from the main INBOX, Dovecot seems to hang after 50-100 messages and the following lines appear in the server log: May 15 18:45:21 [dovecot] IMAP(allen): utime(/home/allen/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 15 18:45:21 [dovecot] IMAP(allen): Our dotlock file /home/allen/Maildir/dovecot-uidlist.lock was deleted May 15 18:45:21 [dovecot] IMAP(allen): Corrupted transaction log file /home/allen/Maildir/dovecot.index.log: Append with UID 1827, but next_uid = 1828 May 15 18:45:21 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 4 May 15 18:45:21 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 4 May 15 18:45:21 [dovecot] IMAP(allen): Corrupted transaction log file /home/allen/Maildir/dovecot.index.log: Append with UID 1827, but next_uid = 1828 May 15 18:45:21 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 4 [...20 identical lines deleted....] May 15 18:48:27 [dovecot] imap-login: Login: allen [192.168.0.1] May 15 18:48:57 [dovecot] imap-login: Login: allen [192.168.0.1] May 15 18:48:57 [dovecot] IMAP(allen): Transaction log file /home/allen/Maildir/dovecot.index.log: marked corrupted I can restart after deleting the dovecot files in ~/Maildir, but the problem recurs. In other folders I've been able to copy large numbers of emails successfully with imapsync. I've not experienced any problems while accessing the folders with Thunderbird. I can't relate these log messages to anything in the configuration file or the documentation, so I'm wondering if I can ask for help? John -- John Allen Bofferdange, Luxembourg allen(a)vo.lu http://www.homepages.lu/allen

1 1

[Dovecot] redhat+dovecot+sendmail problem
by Magnus Polson 15 May '05

15 May '05

I got problem i don't know how to solve. Everything is working fine except that i cant send any html or attachments to the server....they never come to the inbox.. what can be wrong? -- _______________________________________________ Check out the latest SMS services @ http://www.linuxmail.org This allows you to send and receive SMS through your mailbox. Powered by Outblaze

2 1

[Dovecot] new-attrib lost when calling through pop3
by Marten Lehmann 14 May '05

14 May '05

Hi, I noticed, that all messages are moved from new/ to cur/ (using maildirs) after the authentication in pop3, even before the list command. I'm working with 1.0-stable-20050426. Why is this done? Shouldn't a message keep it's new-attrib as long as it isn't retrieved? This is how it worked with qmail-pop3d. Through imap, it works correctly. It's just sad if I can't distinguish between older and new emails with imap, just because I logged in through pop3 shortly before. Regards Marten

2 1

[Dovecot] fcntl lock timout on maildir format Trash .index file under OpenBSD sparc64
by Dale J. Robertson 14 May '05

14 May '05

Whenever I attempt to retrieve or delete mail (Using thunderbird win client) operation takes several minutes. right before completion posts the following error to maillog: May 14 10:22:04 NAPUtil imap(djrobert): Timeout while waiting for release of shared fcntl() lock for index file /home/djrobert/Maildir/.Trash/.imap.index deleting the index file speeds up the operation once. subsequent operations are slow again I don't know what other process is placing a lock on the file. or how to clear it. I am running the 9914p0 package distributed with a march 11 3.7 snapshot (OS loaded from the same snapshot). I previously was running the release 3.6 OS and the Dovecot package that came with the CD. both installs exhibit the same behavior. Both Dovecot and postfix are configured with fcntl locking only. What the heck am I doing wrong? Thanks, Dale

2 1

[Dovecot] Segfault in imap process
by Todd Burroughs 14 May '05

14 May '05

I'm running the CVS version from May 9. I've seen these errors in the log file before (every time I open my mailbox), but this is the first time it crashed. Todd dovecot: May 11 15:00:18 Error: 8438 IMAP(todd.bluegenesis.com): Corrupted index cache file /mailhome/new/t/b/todd.bluegenesis.com/.imap/INBOX/dovecot.index.cache: Duplicated field in header: hdr.RESENT-TO dovecot: May 11 15:02:00 Error: child 8438 (imap) killed with signal 11 Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. (gdb) bt full #0 0x08074d10 in index_mail_get_flags (_mail=0x80c86d0) at index-mail.c:162 data = (struct index_mail_data *) 0x80c8734 #1 0x0808c86d in mail_get_flags (mail=0xb7c71834) at mail.c:32 No locals. #2 0x0805a6a5 in fetch_flags (ctx=0x80bee70, mail=0x80c86d0, context=0x0) at imap-fetch.c:444 flags = Variable "flags" is not available. (gdb) bt #0 0x08074d10 in index_mail_get_flags (_mail=0x80c86d0) at index-mail.c:162 #1 0x0808c86d in mail_get_flags (mail=0xb7c71834) at mail.c:32 #2 0x0805a6a5 in fetch_flags (ctx=0x80bee70, mail=0x80c86d0, context=0x0) at imap-fetch.c:444 #3 0x0805abdc in imap_fetch (ctx=0x80bee70) at imap-fetch.c:264 #4 0x0805676b in cmd_fetch (cmd=0x80bcb98) at cmd-fetch.c:165 #5 0x08059635 in _client_input (context=0x80bcb58) at client.c:334 #6 0x0809e1da in io_loop_handler_run (ioloop=0x80bb9b0) at ioloop-poll.c:184 #7 0x0809d8f9 in io_loop_run (ioloop=0x80bb9b0) at ioloop.c:218 #8 0x08060537 in main (argc=1, argv=0xbffffa84, envp=0xbffffa8c) at main.c:228 (gdb) frame #0 0x08074d10 in index_mail_get_flags (_mail=0x80c86d0) at index-mail.c:162 162 data->flags = data->rec->flags & MAIL_FLAGS_MASK; (gdb) p data->rec $3 = (const struct mail_index_record *) 0xb7c71834 (gdb) p data->rec->flags Cannot access memory at address 0xb7c71838

2 4

[Dovecot] dovecot through NFS
by Marten Lehmann 14 May '05

14 May '05

Hello, as our mail server load increases every day, I plan to scale the single mailserver in differnt units: 1x big storage server for all mailboxes, folders exported through NFS 1x smtp for mail-in (queue local, messages on storage server) 1x pop3/imap to retrieve the messages (config local, messages on storage server) Since we're using maildir only, there's no problem to get the messages into the mailboxes. But what about dovecot for retrieving them? NFS will be v3. Is locking still a problem with it? Might the indexes get corrupt? Regards Marten

2 1

[Dovecot] Fedora Core 3 and Mail.app problems
by Gordon Turner 14 May '05

14 May '05

Hello, first thanks for all the work, I appreciate the attention to security :-) I have a performance issue I am trying to solve. On my new server it would appear that synchronizing changes between the client and server is taking longer then my previous setup. I have recently upgraded from my old server to a new home (the basis for my comparison), From: - Redhat 9.0, uw-imap, using self-signed ssl certificates, on an old p-II. - Only one email user (me), about 40 mail folders with a few dozen messages in each. - Performance was never an issue, Mail.app took maybe 20 seconds to sync up minor deletes etc. To a new home: - Clean install of Fedora Core 3 on a p4, dovecot-0.99.13-3.FC3. - Copy of /home/gturner/mail directory to new server, ie existing mbox format from uw-imap. - Recreated new self-signed certificates on new server, manually added the self-signed certificates, connected with no problems. - Mail.app client, on OS X 10.3.9 (no Tiger yet). I deleted the account on Mail.app, and created it again, the first login/sync took a long time, which was expected. However after that, I noticed that when I first connect or delete a file the sync is slower then the old setup (FYI, I keep "Automatically synchronize changed mailboxes" checked on Mail.app). A result of this appears to be some corruption of some mailboxes, only one or two, nothing valuable. For example, I delete a file and then clear the trash while things are still syncing. So my current solution is to be patient. :-) Any suggestions? I know that I could covert everything over to maildir, but I would like some feedback to see if this would be reasonable. I also noticed that initially there are 3 'gturner imap' threads and the syncing seems to be flying along. Then the thread count goes to 5 or 6 and sync starts to crawl. I looked for a way to limit the number of spawned threads, but only saw stuff about 'waiting' threads or reference to 1.0. I have attached my dovecot.conf for reference. Any help is greatly appreciated, Gord Turner.

2 2

[Dovecot] Outlook strange behaviour...
by Francois Meehan 13 May '05

13 May '05

Hi all, I have a Dovecot server(dovecot-0.99.14) running with IMAP support, running on a Fedora 2 system. Outlook (2003) users receive duplicate mail, "the" second mail doesn't have a title, when clicking on it, we are getting "non fully downloaded" error message. When deleting the "orignal" mail, all duplicates gets deleted too. Any ideas? Thanks in advance, Francois Random Thought: --------------- Colors fade, temples crumble, empires fall, but wise words endure. - Edward Thorndike

1 0

[Dovecot] problem with test69
by Cor Bosman 13 May '05

13 May '05

Hi all, I noticed a problem with test69. I can recreate it with the following steps: - create a folder - copy about 200 emails from INBOX to this folder The copy succeeds, I can see with rawlog that it actually moves the 200 emails around. I can see on the spool that there are 200 emails. This is maildir, with spool over NFS. Now I immediately select the new folder. I now see only a part of the emails reported. And with rawlog I indeed see something like: * FLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft Junk \*)] Flags p ermitted. * 158 EXISTS * 158 RECENT * OK [UNSEEN 3] First unseen. * OK [UIDVALIDITY 1115970206] UIDs valid * OK [UIDNEXT 217] Predicted next UID 2 OK [READ-WRITE] Select completed. My client faithfully reports 158 instead of 200. If I now close/open my client, and re-select, I see 200. This I can reproduce with several different clients, but its pretty obvious it isnt a client issue. I also reproduced this with different users. Anyone see this also? NFS issue? Cor

2 1

[Dovecot] dovecot 1.0-test69 io hangs
by Jens Laas 13 May '05

13 May '05

I've been testing test69 with pop3 (under Linux and with mbox). I began testing with a large inbox (11000 mails) and it seems the communication between dovecot and the mailclient (evolution) stalls after 1000-2000 messages transferred. I've looked in to the (non-trivial) io functionality of dovecot. What I see is that io_loop_handler_run() in ioloop-poll.c does not signal any more data (and eventually the whole thing timeouts). Evolution downloads the mailbox fine via qpopper. I tried turning on rawlog: mail_executable = /usr/libexec/dovecot/rawlog /usr/libexec/dovecot/pop3 I cannot find any logfile.. I must be missing something. Any help or ideas ? Cheers, Jens ----------------------------------------------------------------------- 'This mail automatically becomes portable when carried.' ----------------------------------------------------------------------- Jens Låås Email: jens.laas(a)data.slu.se Department of Computer Services, SLU Phone: +46 18 67 35 15 Vindbrovägen 1 P.O. Box 7079 S-750 07 Uppsala SWEDEN -----------------------------------------------------------------------

3 4

[Dovecot] "shared mailboxes"
by schnitzel meister 12 May '05

12 May '05

Hello, After a long search I've almost settled on dovecot as a pop3 and imap server. I have just one problem.. Rather than have a list support(a)company.com, I'd like to have a shared mailbox. The dovecot homepage explicitly states "Shared mailboxes aren't _yet_ supported." The sentence implies that they're planned - any idea when? Thanks

3 3

[Dovecot] IDLE command timeout
by Sim Harbert 11 May '05

11 May '05

Is it possible to change the IDLE command timeout to be more than 30 minutes? I have a client on my PalmOne Treo 600 which will stay in IDLE mode as long as it can. I would like to set the timeout to something much higher than 30 minutes. Maybe several hours or even more. I don't see a configuration setting for this value in "/etc/dovecot.conf". Am I missing something? Thanks, -Sim

2 5

Re: Re[2]: [Dovecot] 1.0-test69
by Andrew Hucthings 11 May '05

11 May '05

Its nothing special. Code is a bit sloppy as its a 5 minute bodge job, but it works. I use something similar to count number of logins. In mrtg.cfg: Target[pop2]: `/root/gotmail.php` MaxBytes[pop2]: 1000 Options[pop2]: gauge Title[pop2]: POP 21 Messages Statistics PageTop[pop2]: POP 21 Messages Statistics</H1> XSize[pop2]: 500 YSize[pop2]: 200 WithPeak[pop2]: dwmy YLegend[pop2]: No. of Messages ShortLegend[pop2]: Messages LegendI[pop2]:  Messages: LegendO[pop2]:  N/A: Gotmail.php: #!/usr/bin/php -q <?php $file = "/var/log/maillog"; $count=0; if($fp = fopen( $file, "r" )){ while(!feof($fp)){ $line = fgets($fp,128); if($p=strpos($line,"del=")) { $p2=strrpos($line,"/"); $str=substr($line,$p+4,$p2-$p-4); $count+=$str; } } fclose($fp); $file = "/var/log/mrtgpop2"; if($fp = fopen( $file, "r" )){ $line = fgets($fp,128); $linearray = split(" ", $line); $oldin=$linearray[0]; fclose($fp); } if($fp = fopen( $file, "w" )){ $write="$count 0\n"; fwrite($fp, $write); fclose($fp); } $nowin=$count-$oldin; echo "$nowin\n0\npop1.nsnoc.com\nPOP Messages\n"; echo "\n$oldin\n"; } ?> Regards Andrew On Wed, 2005-05-11 at 16:04 +0100, Jethro R Binks wrote: > Oooo, could you publish the code for extracting the data? > > (This patch looks cool, must upgrade soon!) > > > On Wed, 11 May 2005, Andrew Hucthings wrote: > > > Timo: Feature request here I think, I would love this patch (or > > similar) to be in the tree. Already creating mrtg graphs based on it to > > see what is really happening. > > > > Regards > > Andrew > > > > On Wed, 2005-05-11 at 16:21 +0200, Luigi Rosa wrote: > > > Hello Andrey Panin <pazke(a)donpac.ru>, > > > Monday, May 9, 2005, 9:19:57 AM, you wrote: > > > > > > > > > >> Gonna see if I can write a minor patch for dovecot this week so that we > > > >> can see number of messages downloading in a pop3 session in the logfile. > > > >> Similar to the way UW does it, will be very useful for us at work trying > > > >> to trace customers POP problems, I will submit it if anyone will find it > > > >> useful. > > > > > > AP> Don't waste your time :) Take a look at the attached patch. > > > > > > > > > It's GREAT! > > > > > > Is there any chance that will be included in the main build tree? > > > > > > > > > > > > Ciao, > > > luigi > > > > > -- > > Andrew Hutchings (A-Wing) > > Linux Guru - Netserve Consultants Ltd. - www.domaincity.co.uk > > Admin - North Wales Linux User Group - www.nwlug.org.uk > > BOFH excuse 371: Incorrectly configured static routes on the > > corerouters. > > > > > > . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > Jethro R Binks > Computing Officer, IT Services > University Of Strathclyde, Glasgow, UK > -- Andrew Hutchings (A-Wing) Linux Guru - Netserve Consultants Ltd. - www.domaincity.co.uk Admin - North Wales Linux User Group - www.nwlug.org.uk BOFH excuse 43: boss forgot system password

1 0

[Dovecot] 1.0-test69
by Timo Sirainen 11 May '05

11 May '05

http://dovecot.org/test/ - Several mbox fixes, upgrade recommended for test68 mbox users - Possibly fixes some IMAP hangs where Dovecot just stopped replying - Fixed delay-newmail workaround. It was badly broken before. And somewhat off topic advertisement: I got a bit distracted from Dovecot a week ago when a guy started mailing me about wanting to write an irssi2 client as a project to learn Ruby. Half a year ago I had written a semi-working irssi2 server but I got stuck with it because I wasn't interested about writing client for it. Now that the client actually works, irssi2's development has kind of exploded :) Irssi2 is a bit related to Dovecot too, in that it'll be integrated with it more or less tightly to provide instant messaging support. Nothing prevents extending irssi2-protocol to support all other kinds of realtime events either, for example to send new mail notifications. If you're interested, see: http://main.irssi.org/projects/irssi2.html And for the lazy, here's the introduction copy&pasted: Shortly put, irssi2 is to instant messaging what IMAP is to mail. You can safely exit your irssi2 client, and irssi2 server just keeps on going. When you connect back with your client, you can see all the discussion that happened while you were away (and even older discussion, too, if you want). You can also use multiple clients even at the same time, so you could for example keep one client always open at home and still be able to check what's going on with your mobile phone. Irssi2 clients are encouraged to keep their configuration in server side, so nothing should prevent you from temporarily using another irssi2 client from your friend's home with no other configuration needed than irssi2 server's address, your username and password. Irssi2 is designed to support multiple chat protocols (IRC, SILC, MSN, ICQ, etc.) but without ignoring hardcore IRC users. That means that unlike all other similar attempts (such as Jabber), irssi2's client-server protocol will actually allow fully featured irssi2 IRC client to be written with no compromises (but still the same client can be used to talk to MSN and elsewhere). Note that irssi2 isn't trying to replace IRC servers (yet ;). irssi2 server simply connects to normal IRC servers just as a regular IRC client. To prevent mixups with these terms, IRC servers are usually called "gateways" in irssi2.

5 6

[Dovecot] Dovecot Sendmail Maildir
by Gabriel Granger 11 May '05

11 May '05

Hi all, I'm using Debian (testing) for my office mail. I'm using sendmail and Dovecot to deliver email to clients over IMAP using mbox format. I want to move over and start using Maildir. I know that I can use different MTA's to do the job, but I really like sendmail, and I run additional sendmail servers across the my internal and external networks. I'm probably being anal, but I want to keep my MTA the same across the board. Does anyone here use sendmail + dovecot + maildir? if so what's the best way of going about this? Gabe

4 5

[Dovecot] Assertion failed in dovecot 0.99.14
by Quadriplegic Leprechaun 11 May '05

11 May '05

Hi, I am using the dovecot imap server on Linux 2.6.8.1. I get the following error when running it: imap(quad): Panic: file index-sync.c: line 25 (index_storage_sync_size): assertion failed: (messages > ibox->synced_messages_count) This usually occurs when I use imapfilter to move messages from one folder to another, while my client (thunderbird) is connected. Quad

4 3

[Dovecot] Outlook 2003 duplicates UIDL
by Alex Needham 10 May '05

10 May '05

Hi I have Redhat ES4.0 with dovecot-0.99.11-2.EL4.1 installed. Reading a post Outlook Duplicates issue is still killing me, there seems to be asolution to this, I was wondering when this will be available on redhat es40? # Note that Outlook 2003 seems to have problems with %v.%u format which is # Dovecot's default, so if you're building a new server it would be a good # idea to change this. %08Xu%08Xv should be pretty fail-safe. #pop3_uidl_format = %v.%u Rgds Alex

2 1

[Dovecot] Standard dirs
by Claudio Succa 10 May '05

10 May '05

Hi, thank to developers for such a flexible imap server. Is solves succesfully my needs to have a single passwd file for clients accessing both imap/imaps and pop3/pop3s protocols (on a diskless mail/web server with NFS maildirs and NFS indexes!). My question: With 1.0-test68 I have to set login_dir=/var/run/dovecot-login (just a dir not under /var/run/dovecot) instead of /var/run/dovecot/login. I guess that imap-login (running with uid=dovecot) can't access /var/run/dovecot/login if it is under /var/run/dovecot because it is set with permission 0700 and uid=root by dovecot. How can I run dovecot with its standard login_dir config? Claudio -- Claudio Succa PERTEL - Torino - Italy +39-011-437.4141 http://www.pertel.it http://www.uniassist.it http://www.progettocapolinea36.it

1 0

[Dovecot] start_tls on the user and password ldap connection
by Farkas Levente 10 May '05

10 May '05

hi, it seems when dovecot use ldap user and password databases it's not possible to use tls connection and certificate with the ldap connection. wouldn't it be possible to use the same certificate on the ldap connection as used in the ssl_{cert,key}_file parameters in the dovecot conf (or would be possible to use it's own cert in the ldap conf file? yours. -- Levente "Si vis pacem para bellum!"

1 0

[Dovecot] problems with ldap auth
by Nuno Lopes 10 May '05

10 May '05

I'm trying Dovecot v1.0-test43 with ldap authentication but can't seem to make it work. I'm getting the following errors in the log: dovecot: Sep 16 19:50:09 Info: Dovecot v1.0-test43 starting up dovecot: Sep 16 19:50:10 Error: Auth process died too early - shutting down What can I do to see where the error is? I have this configuration working with dovecot 0.99.xx . And if I replace the ldap authentication scheme with another one it starts up right. Following some past mailing list sugestions I've also tried removing most of the auth modules from the compilation but it made no diference. You can see my configuration files in: http://iluvatar.portugalmail.pt/dovecot/dovecot.conf http://iluvatar.portugalmail.pt/dovecot/dovecot-ldap.conf (I've intalled the binaries in /opt/dovecot) Don't know how much more data I can provide to help finding out what the problem is here (I think this won't be enough unless there's a known bug). Thanks, -- Nuno Lopes

3 2

[Dovecot] trouble getting digest-md5 & ldap working
by Udo Rader 09 May '05

09 May '05

hi, I am trying to set up dovecot with digest-md5 as authentication mechanism and openldap as passdb. My problem is ... that I just can't get it working. PLAIN authentication works as expected, but no luck with digest-md5. An excerpt from the two configuration files: dovecot.conf: --------CUT-------- auth = default auth_mechanisms = plain digest-md5 auth_userdb = ldap /etc/dovecot/dovecot-ldap.conf auth_passdb = ldap /etc/dovecot/dovecot-ldap.conf --------CUT-------- dovecot-ldap.conf: --------CUT-------- user_filter = (&(objectClass=posixAccount)(|(mail=%u)(uid=%n))) pass_filter = (&(objectClass=posixAccount)(|(mail=%u)(uid=%n))) default_pass_scheme = plain --------CUT-------- My dovecot installation with plain authentication and OpenLDAP has been quite mature for a long time, so I doubt that it is an issue with openldap. >From Cryrus-SASL I know that in order to get DIGEST-MD5 running it is required to have plaintext passwords in the DIT, but that does not solve anything. syslog tells me this: dovecot-auth: May 08 21:25:09 Error: ldap(frodo): No password in reply So any ideas on where I went wrong? Udo Rader BestSolution.at GmbH http://www.bestsolution.at

1 1

[Dovecot] transparent proxy
by Mark E. Mallett 09 May '05

09 May '05

I'm excited to see that dovecot 1.0-test series supports transparent proxy, but that excitement is muted by: - the recommendation to avoid 1.0 at present; - the requirement to use SQL authentication. I guess I could ignore the first, but the second is sticky. How hard would it be to hack a different sort of proxy server cue into the authentication? Perhaps one of: If authenticating via passwd, use a gid as an index into a server table (or perhaps have the group name be a server name), If passwd authentication fails, try a starting the proxy to a specific other server and see if one can log in there. Or something else.. I dunno, I'm just looking not to install a SQL server just for this. mm

4 3

[Dovecot] index file corruption
by Andy Pastuszak 08 May '05

08 May '05

Hello everyone. I am new to the list, so forgive me if this has been discussed already. My configuration is as follows: Fedora Core 3, fully patched through yum through today. Dovecot 0.9.9.13 Postfix 2.1.5 Using Maildir with Mail stored in ~/Maildir My issue is that, for some odd reason the inbox file index gets corrupt, There is no rhyme or reason as to why it happens or when, but a simple rm -rf ~/Maildir/.INBOX fixes everything (I assume because Dovecot rebuilds the index file.) Has anyone else on the list seen this? Is there some workaround for it? Andy

2 2

[Dovecot] Problem (?) with 1.0-stable
by Jakob Curdes 08 May '05

08 May '05

... Version from April 26, gives me the following errors in the imap log file : dovecot: May 04 09:56:58 Error: IMAP(m6933192-4): file mbox-sync.c: line 1262 (mbox_sync_do): assertion failed: (sync_ctx->ibox->mbox_sync_dirty) dovecot: May 04 09:56:58 Error: child 10721 (imap) killed with signal 6 This occurs sporadically and vanishes after some time. Is this something to worry about or not. I have mbox_dirty_syncs = yes Or does this just say "I am falling back to reading the whole mailbox"? Yours, Jakob Curdes

2 1

[Dovecot] pop3 messages not deleted
by Marten Lehmann 08 May '05

08 May '05

Hello, I'm currently experiencing, that 0 messages are shown at the pop3-prompt: list +OK 0 messages: . But the cur-folder containes 74 files. How can this happen? Why aren't they removed physically? Regards Marten Lehmann

3 5

[Dovecot] dovecot 0.99.14 and imaps (SSL) "hangs"
by Frode Nordahl 08 May '05

08 May '05

Hello, I just decided to try dovecot again after a long pause, and I must say that I am very impressed with the speed and resource usage, even when running with UNIX mailboxes. However, I have a problem with SSL. Every two minutes the connection is frozen, and the client has to reconnect after it times out waiting for a response from the server. My IMAP client fetches all headers, and then caches all messages in my mailboxes. However, if I do this while connected to dovecot using SSL (imaps, port 993) the connection times out roughly every two minutes, and the IMAP client must close the connection, reconnect and resume operations from where it left off. This makes resynching a 40000 message 300MB folder take VERY long :-) Using the same client, connected to the same server and syncing the same mailbox connecting to regular imap port (no TLS, port 143), everything works smoothly. The very same client, server and mailbox works flawlessly with uw-imapd and SSL. I have turned on rawlog, and everything seems to be OK. I am unable to dump the wire, because it's SSL, so not sure what to do to debug this. One thing I find a bit strange is that /var/run/dovecot/ssl-parameters.dat is a 0 byte file. Is this normal? Client: Apple Mail 1.3.11 (v622) Server: dovecot 0.99.14, installed from ports on FreeBSD 5 dovecot.conf: Regards, Frode Nordahl

6 8

[Dovecot] pop vs. imap inconsistancy
by jeff sacksteder 08 May '05

08 May '05

I am converting from courier and have noticed change in behaviour with Dovecot. I use maildirs with squirrelmail connecting by imap as well as a POP3 client. Courier would set the 'mail status-read' flag for any message which was downloaded with the POP3 interface. Dovecot apparently does not. Is this a bug or intended behaviour? If it is intentional, can it be changed with the config file?

2 1

[Dovecot] Outlook Duplicates issue is still killing me
by Jeff Ramsey 08 May '05

08 May '05

Hi, I have one pop3 client who has three computers, and he has Outlook XP on two, and 2003 on the third. They are all set to leave a copy of messages on the server, and that causes a duplicate message for every message he gets. I then can tell him to uncheck the "leave a copy on the server" box, and pop his mail, and the duplicates will go away for two or three days, only to start up again. I have a stock Fedora Core 2 server with dovecot and Sendmail. I do a nightly yum, so as to stay up2date. My version of dovecot is 1.0-test42. Has anyone else seen this issue? What can I do to fix it, short of permanently unchecking that box in Outlook? (The user is my boss, and he likes to get his email on all three computers...) -- Jeff Ramsey MIS Administrator Tubafor Mill, Inc.

4 3

[Dovecot] Compiling on Solaris 10
by Roger Oliver Clark 08 May '05

08 May '05

Trying to compile Dovecot on Solaris 10. I have tried the 99.14 release and today's 1.0-stable release. In both cases I get the following error message: if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -I../../src/ lib-sql -I../../src/lib-settings -I../../src/lib-ntlm - DAUTH_MODULE_DIR=\""/usr/local/lib/dovecot/auth"\" -DPKG_LIBEXECDIR= \""/usr/local/libexec/dovecot"\" -I/usr/local/include -g -O2 -Wall - W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar- subscripts -Wformat=2 -Wbad-function-cast -I/usr/sfw/include -MT mycrypt.o -MD -MP -MF ".deps/mycrypt.Tpo" -c -o mycrypt.o mycrypt.c; \ then mv -f ".deps/mycrypt.Tpo" ".deps/mycrypt.Po"; else rm -f ".deps/ mycrypt.Tpo"; exit 1; fi In file included from /usr/include/unistd.h:18, from mycrypt.c:6: /usr/include/sys/feature_tests.h:336:2: #error "Compiler or options invalid; UNIX 03 and POSIX.1-2001 applications require the use of c99" make[3]: *** [mycrypt.o] Error 1 I am using gcc version 3.4.3 (csl-sol210-3_4-branch+sol_rpath) to do the build. It fails with just ./configure ; make The only thing useful I found on Google was this: http://www.mail-archive.com/openssl-dev@openssl.org/msg18884.html Can anybody help? Thank you, Roger

2 1

[Dovecot] Public Folders Using Dovecot
by Net Cerebrum 08 May '05

08 May '05

Are IMAP Public Folders supported by Dovecot. How do I configure / implement them ? I have not been able to find any references / documentation about it. TIA,

2 1

[Dovecot] Test68 and Namespaces
by Jim Summers 08 May '05

08 May '05

Hello List, I am in the process of building a new mail system here. I am hoping to eventually migrate my users from mbox storage to maildir. They have been using mbox forever and would rather get used to maildir slowly. So I have come upon the idea of using namespaces to provide the different mailstores. Since this isn't available in the current stable, or at least I could not figure out how to do it, I have been working with 1.0-test68 since it provides the ability to configure things with the namespaces. But I am seeing an error pop up in my maillog file when exiting the client, it is: ============================================ May 3 08:11:41 tbox dovecot: IMAP(sub4000): file mbox-sync.c: line 1371 (mbox_sync_do): assertion failed: (sync_ctx->mbox->mbox_sync_dirty) May 3 08:11:41 tbox dovecot: child 12717 (imap) killed with signal 6 ============================================ Wasn't sure if it is a code bug or if it is how I have the namespace entries setup. In my dovecot.conf file I have: ------------------------------------ namespace private { separator = / inbox = yes # prefix = "#mbox/" location = mbox:~/Mail/:INBOX=/var/mail/%u } namespace private { separator = / prefix = md/ location = maildir:~/Maildir } namespace private { separator = / prefix = mail/ hidden = yes } namespace private { separator = / prefix = ~/mail/ hidden = yes } namespace private { separator = / prefix = ~%u/mail/ hidden = yes } ------------------------------------ All seems to work except the message showing up in the logs. My goal/setup is to provide: 1. mbox delivery in the mailspool(/var/mail) from sendmail 2. access to existing ~/Mail/ mbox storage. 3. ability to begin setting up / migrating to maildir in ~/Maildir Is my namespace config above overkill / borken / wrong? Ideas / suggestions on this would be greatly appreciated. Environment: Server to be: RedHat AS EL4 Clients: Thunderbird, Evolution, mutt, pine, mailreader on OS/X. TIA -- Jim Summers School of Computer Science-University of Oklahoma -------------------------------------------------

2 1

[Dovecot] test-68 coredump
by Gregory Bond 08 May '05

08 May '05

I've tried upgrading from test-51 to test-68, with mixed results. It seems to fix the problem I had with imap and Thunderbird getting confused and not showing headers or body for some email. But something in dovecot is coredumping when I select certain mailboxes. Thunderbird just hangs when you select that mailbox, and mutt gets an EOF on the imap socket while "fetching message headers". Other mailboxes seem to run OK. The failing ones _might_ be empty or have only 1 message in them. Removing index files doesn't help. There is a core file in /var/run/dovecot, and file(1) says it's from dovecot-auth, but GDB can't make sense of the core with that executable, and the login has well and truly run when the core happens. (The core doesn't seem to be from the imap process either.) Any clues how I might debug this? [Solaris 2.8, gcc-3.3, dovecot test-68, imap+Maildir, Thunderbird 1.0.2 on OSX and mutt on Solaris]

2 1

[Dovecot] quota-command?
by Marten Lehmann 08 May '05

08 May '05

Hello, if you log in at hotmail.com, gmx, lycos or yahoo, you can see something like "using 1.4mb of 250mb total". Is there any IMAP command to check to current quota usage? Our webmail-interface will not have access to the filesystem to summarize the size of each file, so an IMAP-command would be great. I don't know if this would be a new feature or just part of the Maildir++ quota-system, that is not yet supported by dovecot. Regards Marten

2 1

[Dovecot] Migrating from courier-imap to dovecot
by Odhiambo Washington 08 May '05

08 May '05

Hello Gang, I am new to dovecot and the only reason (so far) I would like to use dovecot, and in production with 12k+ users, is the fact that it's supposed to be faster and less of a resource hog. Now, sometimes I am really good at reading the documentations but it sometimes happens that one overlooks something. I did read the migration notes three times! My users are in /etc/passwd and I am running dovecot in IMAP only mode. I did put default_mail_env = maildir:~/Maildir in dovecot.conf, then for one user, I did the following: cd ~wash/Maildir cp courierimapsubscribed .subscriptions # Then I edited to remove "INBOX." cp courierimapuiddb dovecot-uidlist The permissions are right, but when I login as this user, I don't see all the folders that had been there before when he was using courier-imap!! When I login to the web interface (we use Squirrelmail) and go to the Folder options, I can't see any folders to subscribe to either! Now my questions: 1. What am I overlooking?? 2. Does someone have a script that can be used to automate the copying of courierimapsubscribed to .subscriptions and that of courierimapuiddb to dovecot-uidlist, and the editing to remove the "INBOX."? I am sure I really don't have to reinvent the wheel, no? Meanwhile I am hitting google, while waiting for your answers. Thanks in advance. -Wash http://www.netmeister.org/news/learn2quote.html -- +======================================================================+ |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +======================================================================+ Ducharme's Axiom: If you view your problem closely enough you will recognize yourself as part of the problem.

4 3

[Dovecot] How to check for keywords in IMAP store?
by Steffen Kaiser 08 May '05

08 May '05

Hello, I'm checking my way to migrate from Courier to Dovecot. Wiki says that "there's currently no easy way to migrate them [the keywords]". Frankly, I lack the information to check if some client is using keywords at all. More importantly, is it OK to assume that when SELECT INBOX returns no \* in OK [PERMANENTFLAGS ...] that the IMAP server does not allow keywords at all? [BTW: Is there a searchable mail archive of the Dovecot list?] Bye, -- Steffen Kaiser

3 2

[Dovecot] SquirrelMail IMAP protocol errors?
by Schettino, John Charles 08 May '05

08 May '05

I use Squirrelmail to filter messages, and it's doing this: raw log in: A009 UID SEARCH CHARSET ISO-8859-1 ALL Header X-Spam-Level {4} **** A010 LIST "" "spam" raw log out: * SEARCH A009 OK Search completed. * BAD Error in IMAP command : Unknown command. * LIST (\NoInferiors \Marked) "/" "spam" A010 OK List completed. it goes on like that in the log for every filter. What exactly is the BAD Error there, and is it something I can fix?

2 1

[Dovecot] Setting location for indexes
by dovecot.7.signal11＠spamgourmet.com 08 May '05

08 May '05

We have NFS-mounted user directories which cause significant problems with stale file handles: dovecot: IMAP(uid): fstat() failed with file /home/uid/mail/.imap/INBOX/dovecot.index.log: Stale NFS file handle (a) why can't it just close the file and re-open ? (b) is there a way to specify with the 'default_mail_env' (or in some other way) the location of **only** the indexes (and let dovecot autodetect all else?). I have already tried 'mmap_disable = yes', but that does not solve the problem, and if I set 'default_mail_env = INDEX=/var/spool/mail/INDEX/%u', I get errors like: IMAP(uid): Failed to create storage with data: INDEX=/var/spool/mail/INDEX/uid I don't want to specify mbox:~/mail/ or mbox:~/Mail/, because some users have one and some the other.

6 6

Re: [Dovecot] headers don't match message
by Brian Bartholomew 08 May '05

08 May '05

Kevin <angrycoggy(a)gmail.com> wrote: > once i had everything moved and dovecot running i checked my mail > via imap. all the messages appeared however when i try to read a > message the message body doesn't match the header info that's showed > in the message list. Gregory Bond <gnb(a)itga.com.au> wrote: > I see this a lot using Thunderbird & an old-ish dovecot (test-46 I > think). it is triggered by leaving thunderbird connected at work, > going home and accessing the same IMAP server from mutt at home. If > I use mutt in read-only mode it's fine, but if I delete any messages > in mutt, then the work Thunderbird gets very very confused. I'm using one of the stable 1.0 releases for 184 accounts on Gentoo Linux on Sparc. I too am seeing the message header/body mismatch in Thunderbird. Is the index file handling sufficiently robust against surprises that I can delete the dovecot index files every night out from under the logged-in imap sessions? Brian

2 1

[Dovecot] pop vs. imap inconsistancy
by jeff sacksteder 08 May '05

08 May '05

I am converting from courier and have noticed change in behaviour with Dovecot. I use maildirs with squirrelmail connecting by imap as well as a POP3 client. Courier would set the 'mail status-read' flag for any message which was downloaded with the POP3 interface. Dovecot apparently does not. Is this a bug or intended behaviour? If it is intentional, can it be changed with the config file?

1 0

[Dovecot] Help configuring dovecot for SSL
by Knute Johnson 04 May '05

04 May '05

Hi: I'm running dovecot on a Fedora 3 box and would like to be able to make a TLS connection to it with my Pegasus Mail program running on my Winblows machine. Does anybody know if it is possible? If it is I could really use some help configuring my dovecot. I have tried for several days but I really don't know what I'm doing and need a direction to start. Thanks, -- Knute Johnson Molon Labe...

2 2

[Dovecot] Multiple Logins - Single Mail Account
by Net Cerebrum 04 May '05

04 May '05

I have a mail account which needs to be accessed by 4-5 people simultaneously through IMAP. As of now I have configured it on the respective clients using the same username and password so we have multiple people accessing the same account through their mail clients simultaneously and it is working flawlessly. Is this alright or can it lead to some problems or corruption of data later ? What is the best way to allow multiple people to access a single mailbox for read as well as write operations ? Thanks,

3 4

[Dovecot] Segfault in imap
by Todd Burroughs 03 May '05

03 May '05

I'm running the current CVS version, as of April 26. There have been a few of these with the same problem. There was a NULL pointer dereference at mail-index-view.c:603 view->map == NULL Here's the log entry, etc. dovecot: May 03 08:30:08 Error: 10195 IMAP(support): UIDVALIDITY changed (1115122813 -> 1115123383) in mbox file /mailhome/new/m/2/support/mbox dovecot: May 03 08:30:13 Error: child 10195 (imap) killed with signal 11 Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. (gdb) bt full #0 mail_index_view_open (index=0x80c2fc0) at mail-index-view.c:603 view = (struct mail_index_view *) 0x80c5608 #1 0x08077ccd in index_storage_mailbox_init (ibox=0x80c3bc8, index=0x80c2fc0, name=0x80a6cfe "INBOX", flags=Variable "flags" is not available. ) at index-storage.c:345 storage = Variable "storage" is not available. (gdb) bt #0 mail_index_view_open (index=0x80c2fc0) at mail-index-view.c:603 #1 0x08077ccd in index_storage_mailbox_init (ibox=0x80c3bc8, index=0x80c2fc0, name=0x80a6cfe "INBOX", flags=Variable "flags" is not available. ) at index-storage.c:345 #2 0x080679c2 in mbox_alloc (storage=0x80bc788, index=0x80c2fc0, name=0x80a6cfe "INBOX", flags=0) at mbox-storage.c:500 #3 0x080684e0 in mbox_open (storage=0x80bc788, name=0x80a6cfe "INBOX", flags=0) at mbox-storage.c:545 #4 0x0806863f in mbox_mailbox_open (_storage=0x80bc788, name=0x80a6cfe "INBOX", input=0x0, flags=0) at mbox-storage.c:603 #5 0x0808ce88 in mailbox_open (storage=0x0, name=0x80a6cfe "INBOX", input=0x0, flags=0) at mail-storage.c:295 #6 0x08057f9f in _cmd_select_full (cmd=0x80bcb98, readonly=0) at cmd-select.c:32 #7 0x08058171 in cmd_select (cmd=0x80bcb98) at cmd-select.c:97 #8 0x08059635 in _client_input (context=0x80bcb58) at client.c:334 #9 0x0809e04a in io_loop_handler_run (ioloop=0x80bb9b0) at ioloop-poll.c:184 #10 0x0809d769 in io_loop_run (ioloop=0x80bb9b0) at ioloop.c:218 #11 0x08060537 in main (argc=1, argv=0xbffffa44, envp=0xbffffa4c) at main.c:228 (gdb) p view->map $1 = (struct mail_index_map *) 0x0 (gdb) p index->map $2 = (struct mail_index_map *) 0x0 (gdb) p index->indexid $3 = 0

1 0

[Dovecot] Error in rename uidlist while fetching through pop3
by James Berry 03 May '05

03 May '05

My dovecot server seems to randomly begin giving errors to pop3 users who try to fetch their email. Once this begins, they see no more new mail, though the mail is in cur. Running: dovecot-stable 20050501, Mac OS X 10.3.9 Log entries like this: May 2 19:35:18 caddy dovecot: pop3-login: Login: kim [24.22.16.169] May 2 19:35:18 caddy dovecot: POP3(kim): rename(/Users/kim/Maildir/ dovecot-uidlist.lock, /Users/kim/Maildir/dovecot-uidlist) failed: Input/output error May 2 19:35:18 caddy dovecot: POP3(kim): file_dotlock_replace(/Users/ kim/Maildir/dovecot-uidlist) failed: Input/output error Is this a known problem, and/or is there a known way to recover from such a situation? I'm managed to throw out the uidlist, but that means they get a whole dump of new mail. -jdb

2 1

[Dovecot] How to try dovecot-lda
by Joakim Verona 02 May '05

02 May '05

Hello, I'm interested in trying the dovecot-lda with sieve support. What would be the proper way to test it? I'm currently using a Fedore core 2 server, with spamassassin and procmail. To get the same effect with dovecot-lda, would I put a line like this in my .forward? spamassassin|dovecot-lda I'm just guessing, so please correct me if im wrong. Im thinking of setting up a separate mail account and copy my mail there to test the ported procmail to sieve recipies also. -- Joakim Verona www.verona.se

1 0

[Dovecot] disabling indexes?
by Marten Lehmann 02 May '05

02 May '05

Hello, I recently had the problem, that an index was corrupt. Thus, messages haven't been listed (talking about POP3), but still remained in the filesystem. As there is no SEARCH-command in POP3, dovecot didn't notice that the index is corrupt and didn't rebuild it. The problem is, that a user can't delete messages through POP3 which aren't listed by dovecot. If the maildir size increases, the arrival of new messages will be blocked because the mailbox is full. And the user has no chance to delete it. Regards Marten

1 0

[Dovecot] Blank lines in mailboxes
by Jakob Curdes 30 Apr '05

30 Apr '05

Hello, we use dovecot on a regular basis. Sometimes I end up with a user telling me he does not get mail. When I look after the problem, I always find leading blank lines in the mbox file. We are using postfix with dovecot and amavisd as spam scanner. Amavisd never accesses the mbox files directly so this can be ruled out. I suspected procmail but now it happened also with accounts where no procmail is active. I found only a list thread where this happened always, i.e. it was a configuration error. (Meaning the mailbox was correct but dovecot would not read it). Here ist is only occasionally and therefore hard to track . Does anybody have the same problem or has hints to a solution ? We are running postfix 2.1.4 and dc 0.99.10.6 ; just now I am upgrading to pf 2.2.2. and dc 0.99.14. Yours, Jakob Curdes

5 21

[Dovecot] Fresh Dovecot Install
by GPL 29 Apr '05

29 Apr '05

Working on an RH9 box. Did not use yum. Downloaded the "dovecot-stable-latest.tar.gz". Uncompressed it, downloaded and installed gcc. Ran the following: ./configure make sudo make install Seemed to have done its thing. I'll admit I am not well versed in using "make" or compiling anything. When I install I usually use yum on fedora machines. This one being an RH9 machine I have plugged yum into the fedora legacy project and it did not let me install dovecot via yum. So I opted for this route. Regardless, if I run 'which dovecot' I see "/usr/local/sbin/dovecot" However now I do not seem to be able to see it run. I get nothing when I: rpm -qa | grep dovecot ps aux | grep dovecot service dovecot status SO AM HAVE MISSED SOMETHING! Is there another script I need to run? Suggestions welcome. Thanks, George

5 8