- dovecot - dovecot.org

[Dovecot] error: received another "not listening" notification
by Andreas Goertz 29 Apr '05

29 Apr '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, i got a problem with dovecot 0.99.14 - after a while of checking pop3 periodically, the dovecot-auth process gets killed. Some clients, e.g. outlook (express), then requests for reentering the password. When this happens, i see something like this in th elogs: Apr 28 14:53:45 marge dovecot: child 25819 (auth) killed with signal 4 Apr 28 14:55:09 marge dovecot: login: received another "not listening" notification (if you can't login at all, see src/lib/fdpass.c) Any idea, how to solve this? Thanks in advance, Andreas Goertz. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.5 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCcOjTpAOZWzj6viQRAtz+AKCjfTe3ib3tsBUeqZjTuLY/hcJ2mACgqePc /T4TGvBNzmY0snTpOMHuUdE= =t5Ev -----END PGP SIGNATURE-----

1 1

[Dovecot] dovecot 0.99.xx to 1.0-stable how-to?
by Rich West 28 Apr '05

28 Apr '05

I realize that there have been some big changes in features and configuration file settings between 0.99.xx and 1.0-stable, so when I went to perform an upgrade on our testing server, I carefully combed through the configuration files and matched up everything I could. I fired up dovecot-1.0-stable and was pleased to see that it was happily running. I attempted to connect to it, and discovered that it wasn't listening to any ports.. then I realized that the app had crashed due to a typo in the config file (oops). Fixed that, started it up, and it was happily running and listening. However, it wouldn't authenticate any users.. Backing down to the 0.99.14 version that we had installed allowed for authentication (against ldap) to work just fine.. Is there anything that I should be looking for within the dovecot-1.0-stable that is dramatically different in regards to user authentication? -Rich

3 5

[Dovecot] Root uid
by Chris L. Franklin 28 Apr '05

28 Apr '05

Whats the easy'est way to mod the source to allow the statis uid and or gid or of the users be root ? PS. I do wish this was an admin set-able option in the dovecot.conf -- Chris L. Franklin --

3 2

Re: [Dovecot] Root uid
by Curtis Maloney 28 Apr '05

28 Apr '05

Chris L. Franklin wrote: >> Honestly, why do you want it to be root? It's NOT a good idea, even >> though Dovecot has so far shown to be very secure. > > > I disagree, strongly To which statement? That using root is not a good idea, or that Dovecot has shown to be secure? >> I thought the only thing stopping this (apart from good sense) is the >> minimum UID setting in the config file? > > Nope it's in the source to disallow it Oh, ok. Well, I'm not surprised. It's generally considered a bad practice. > PS. On the good sense part, It's way I use SELinux. I could just hand > out root's login on my box and not worry. > From what I understand, SELinux is a special case. What I've been told of it, it's an interesting idea, with much merit. I don't know enough to say either way. Maybe I'll take a closer look after I've finished delving into Sun's RBAC. As for the code changes, from memory the UID checking stuff is all in the one place ( in 0.99.14 it seems to be src/lib/restrict-access.c ). I'm not sure about 1.0... we'll move to that when we can have custom flags :) -- Curtis

1 0

[Dovecot] Assertion Failures in Current CVS version
by Todd Burroughs 28 Apr '05

28 Apr '05

I've attached a few assertion errors in imap. Any fixes or advice on where to look are appreciated. This is with the CVS version, current as of April 27. Todd Burroughs

1 0

[Dovecot] cutting everything after @
by Juraj Bednar 27 Apr '05

27 Apr '05

Hello, I am migrating one server to dovecot. The only problem is, that users have logins with @domain as part of their user name. I want to use pam auth (for other reasons, if only for dovecot, I would use mysql, but I need the same password db to be used for other services, like samba). Is there a way to allow this type of login? Just cut everything beginning with @. I can change the source code, but then I don't get nice automatic upgrades. Or can this be done easily with PAM? Thanks, Juraj.

7 7

[Dovecot] Shared mailboxes and accessing MailDir not through IMAP
by Steffen Kaiser 27 Apr '05

27 Apr '05

Hello, I'm testing Dovecot that is part of Debian/sarge (v0.99.14-1). So far so good. I have migrated some mailboxes for testing with success and seems that everything works fine. One thing I do not figure out is, what to do about shared mailboxes, which are the very reason of searching for an alternative IMAP server, The Wiki states that there is some sort of shared mailboxes, based upon symlinks. Well, but since which version actually?? The Changelog stops at 2003-11-08 21:12 ? What I need is a mailbox (maildir) for a contact address (not a real shared mailbox, but several users shall be able to read a mail and delete it after processing). For this, one needs write permission to the mails therein only, the MDA takes care of to make the mails readable for the group. It would be good to see, if somebody had answered a mail already, but that's not required. What I tried is this: I setup all Unix-permissions of the folders (. cur new tmp: u=rwx,g=srwx) and their parents (u=rwx,g=x). Then I placed a symlink into the maildir of all users. Each user caches the INDEXes into an individual /var/ directory, not in the maildirs themselves. (BTW: I wonder why I need to give the group write permission to the base directory '.'). The mailbox shows up and is read-write. Now I wonder, what impact I'm to expect here? Esp. "The only problem is that currently everyone's message flags would be shared as well." (quote from a message of a thread taken from the Wiki) Then there is http://dovecot.org/pipermail/dovecot/2003-March/001113.html the third item will apply to my situation, I guess. MailDir is (sort of) expected to be read by mutt directly, for instance. Because the mailboxes are located within the users home directories, some of them do this. Do this item mean that Dovecot is NOT expecting that mails are deleted in any other way than through itself? Otherwise Dovecot would find a change in the mailbox and rebuilt the index file regardless whether the change had been originated by another IMAP client or by directly manipulating the maildir. Bye, -- Steffen Kaiser

4 3

[Dovecot] local users + virtual domains
by Micha Silver 27 Apr '05

27 Apr '05

I'm redesigning our mail server which holds several hundred mailboxes - most are local system users and some are virtual domains that we host. I understand that the 1.0x stable release allows for multiple auth mechinisms, so that I could use both PAM for local users and a passwd-file for the virtuals. If I want to stick with 0.99x can I mix and match in a single passwd-file the username/passwd for both local and virtual users? In dovecot.conf I'd have something like: default_mail_env = maildir:%h/Maildir auth-userdb = /etc/dovecot/passwd-file auth-passdb = /etc/dovecot/passwd-file then in passwd-file I'd enter: # local users localuser1:<passwd>:501:501::::: localuser2:<passwd>:502:502::::: ... #virtual domains virt1(a)example1.com:<passwd>:5001:5001::/var/vmail/%d/%u:/bin/false::INBOX=/var/vmail/%d/%u/Maildir postmaster(a)example1.com:<passwd>:5001:5001::/var/vmail/%d/%u:/bin/false::INBOX=/var/vmail/%d/%u/Maildir virt1(a)example2.com:<passwd>:5001:5001::/var/vmail/%d/%u:/bin/false::INBOX=/var/vmail/%d/%u/Maildir postmaster(a)example2.com:<passwd>:5001:5001::/var/vmail/%d/%u:/bin/false::INBOX=/var/vmail/%d/%u/Maildir ... Would this combination work? Thanks, Micha

1 0

[Dovecot] dovecot stopping - no messages
by Nigel Allen 27 Apr '05

27 Apr '05

Greetings Running Fedora Core 3 and dovecot-0.99.13-3.FC3 as a production mail server for around 30+ accounts. A couple of times a day dovecot just stops. Nothing in the mail log except for Apr 26 00:48:19 sydsrv05 imap-login: Can't connect to auth process at default: Connection refused It's got to the point that I have put a script into cron.hourly to restart the dovecot service every hour. Any suggestions where to start looking please? Rgds Nigel -- Nigel Allen, Snr Consultant, ProSmart Consulting Australia 48 Tiarri Avenue, Terrey Hills, NSW 2084, Australia Tel: +61 2 9450 2690 Fax: +61 2 9450 2691 Mob: +61 4 1494 5269 http://www.prosmart.com.au

2 4

Re: [Dovecot] docecot and procmail?
by Todd Burroughs 27 Apr '05

27 Apr '05

On Tue, 26 Apr 2005, Dan Stromberg wrote: > Is dovecot still considered unreliable when combined with NFS? I've been using the test releases and lately the current CVS release over NFS. We're using procmail to deliver mail and dovecot as the imap server. Imap access is sometimes through UW-imap on the same mailboxes. We keep the index files on the NFS server and are using mbox format. I am only running this on one server at this point, so you could see other problems if it is run on multiple servers. Procmail is run on several servers. We're probably testing around 50 mailboxes, some quite large. I haven't seen any corruption of the mboxes and some of them get hit pretty hard. >From my experience, I wouldn't call it "unreliable". I have this setting in the config: mmap_disable = yes I haven't tried using mmap yet... The server is Linux, kernel 2.6.x and the NFS server is a NetApp. Make sure that NFS locking is working. Todd

1 0

[Dovecot] Problem with users home...
by websafe 27 Apr '05

27 Apr '05

Hi :) I hope this short example shows what problem I have: # returns users homedir from /etc/passwd grep user1 /etc/passwd | cut -d':' -f6 # result: /home/group-subdir/user1 And the logfile... #maillog imap-login: Login: user1 [192.168.0.253] imap(user1): mkdir(/home/user1/Maildir/.Trash) failed: No such file or directory Why Dovecot tries to create /home/user1/Maildir/.Trash and NOT /home/group-subdir/user1/Maildir/.Trash as in /etc/passwd ??? Is there any solution? I'm running 0.99.14 # cat /etc/dovecot.conf ssl_disable = yes disable_plaintext_auth = no login = imap verbose_proctitle = yes default_mail_env = maildir:/home/%u/Maildir auth = default auth_mechanisms = plain auth_userdb = passwd /etc/passwd auth_passdb = shadow /etc/shadow auth_user = root Thanks in advance, -- websafe

3 2

[Dovecot] Mozilla Thunderbird 1.0 and Dovecot/IMAP problem.
by websafe 27 Apr '05

27 Apr '05

If you notice problems with your imap folders and "Lost transaction logfile" when connecting Dovecot (0.99 / 1.0-testXX) via IMAP, upgrade to Thunderbird 1.02. This should help. -- websafe

1 0

[Dovecot] Track when user last checked mail
by Del Stoliker 27 Apr '05

27 Apr '05

First off I've just got to say thanks. We just upgraded from UW to Dovecot migrating from mbox to maildir. Wow, what a difference! Load average used to hang around 5.0 during business hours and could get up to 20+ on a bad day. Now we rarely break 1.0! I'm wondering if there's a way to keep track of the last time a user checked their email and whether they checked it using POP or IMAP. We're trying to gather statistics on what protocols our users use and find accounts that haven't been checked for a long time. We used to be able to do some of this with the finger command and the user's mbox. I found a script called "mfinger" that works better with Maildir, but it's designed for Courier. Any ideas? Thanks!

6 6

[Dovecot] docecot and procmail?
by Dan Stromberg 27 Apr '05

27 Apr '05

Is dovecot still considered unreliable when combined with NFS? Is this true for mbox only, or Maildir as well? If dovecot Is still considered unreliable with NFS, how about having a dovecot mode that would chain into procmail for delivery, so that dovecot doesn't (necessarily) have to reinvent that wheel? Thanks!

4 4

[Dovecot] Why is "UIDVALIDITY changed" fatal?
by Chris Wakelin 27 Apr '05

27 Apr '05

I've got several users testing Dovecot IMAP at the moment, but some of them are also accessing their mail via UW-IMAP at other times. (I've warned them about accessing the same folder simultaneously via UW-IMAP and Dovecot!) In addition, we have special folders "AutoSpam" and "Trash" that pruned using Washington's "mailutil" automatically every so often. Of course, Dovecot's indexes will become invalid in such cases, but they seem to get rebuilt automatically OK. However, in some cases UW-IMAP seems to change the UIDVALIDITY value (not sure why!) and when Dovecot tries to sync it notices this and gives up with a fatal error on opening that folder. Opening the folder a second time is then OK. I was wondering why Dovecot can't just rebuild the indexes silently in such cases (which seems to be done by returning "0" from the mbox_sync_loop() routine)? Best Wishes, Chris --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

3 11

[Dovecot] Basic configuration problem "not a directory"
by Einar Flesaker 26 Apr '05

26 Apr '05

Hi, I've been struggling with getting dovecot up and running the last hour, but I seem to be stuck. When logging in (which I can do successfully) my connection is dropped, and the following is outputted to my dovecot log: dovecot: Apr 26 09:56:52 Fatal: chdir(/bin/false) failed with uid 513: Not a directory dovecot: Apr 26 09:56:52 Error: child 27345 (imap) returned error 89 .. But I'm certain the relevant directories exist. Relevant configuration details are as follows: * [dovecot.conf] valid_chroot_dirs = /var/spool/vmail default_mail_env = maildir:/var/spool/vmail/$d/%n/ * [passwd sample] einar@domain.com::513:513:/var/spool/vmail/domain.com/:/bin/false:: * [directory listing] [root@server einar]# pwd /var/spool/vmail/domain.com/einar [root@server einar]# ls -l totalt 12 drwx------ 2 virtmail virtmail 4096 apr 26 07:27 cur drwx------ 2 virtmail virtmail 4096 apr 26 08:48 new drwx------ 2 virtmail virtmail 4096 apr 26 08:48 tmp I'd be very grateful for any assistance, any ideas of what might be wrong. Is there any easy way to see the relevant directory that /bin/false exits on? -Einar-

3 7

[Dovecot] many instances om imap and imap-login
by Jon 26 Apr '05

26 Apr '05

Hi, Im using dovecote as my IMAP interface. However i do have a lot of imap instances. its only 7 user using the system as i get this. please advice. 1230 ? S 0:00 imap-login 1309 ? S 0:00 imap-login 1387 ? S 0:00 imap-login 1388 ? S 0:00 imap-login 1389 ? S 0:00 imap-login 1390 ? S 0:00 imap-login 1391 ? S 0:00 imap-login 1399 ? S 0:00 imap 1400 ? S 0:00 imap 1401 ? S 0:00 imap 1402 ? S 0:00 imap 1406 ? S 0:00 imap 1442 ? S 0:00 imap 1636 ? S 0:00 imap 1637 ? S 0:00 imap-login 1638 ? S 0:00 imap-login 1640 ? S 0:00 imap 1683 ? S 0:00 imap-login 1684 ? S 0:00 imap-login 1685 ? S 0:00 imap-login 1686 ? S 0:00 imap-login 1687 ? S 0:00 imap-login 1689 ? S 0:00 imap-login 1692 ? S 0:00 imap 1693 ? S 0:00 imap 1697 ? S 0:00 imap 1698 ? S 0:00 imap 1699 ? S 0:00 imap 1701 ? S 0:00 imap 1914 ? S 0:00 imap 1916 ? S 0:00 imap 1965 ? S 0:00 imap-login 1968 ? S 0:00 imap 1969 ? S 0:00 imap 1971 ? S 0:00 imap-login 1974 ? S 0:00 imap-login 1980 ? S 0:00 imap-login 1981 ? S 0:00 imap-login 2068 ? S 0:00 imap 2069 ? S 0:00 imap 2071 ? S 0:00 imap 2072 ? S 0:00 imap-login 2079 ? S 0:00 imap 2157 ? S 0:00 imap-login 2158 ? S 0:00 imap-login 2159 ? S 0:00 imap-login 2160 ? S 0:00 imap-login 2161 ? S 0:00 imap-login 2162 ? S 0:00 imap-login 2332 ? S 0:00 imap 2337 ? S 0:00 imap 2338 ? S 0:00 imap 2339 ? S 0:00 imap 2340 ? S 0:00 imap 2341 ? S 0:00 imap-login 2342 ? S 0:00 imap-login 2386 ? S 0:00 imap 2387 ? S 0:00 imap-login 3095 ? S 0:00 imap 3096 ? S 0:00 imap-login /jon

3 2

Re: [Dovecot] many instances om imap and imap-login
by Dominic Marks 26 Apr '05

26 Apr '05

On Tuesday 26 April 2005 15:19, you wrote: > Thanks for extensive answer. > > I will look into all your suggestions. Please keep the mailing list in the response, it allows other people to provide advice, follow the conversation, and you get, hopefully, complete solutions stored in the archives waiting for Google to index. > Answers to you questions: > > Are the mailboxes being accessed via Webmail?: > yes they can but arent at the moment (squirrelmail) Webmail can cause lots of extra connections to me made. > What Mail application are your users using?: > Thunderbird 1.0.2 Don't have much experience with this client, although it works when I've tried it. Others may be able to provide experience here. > Have you checked what state the connections are in?: > Do you mean of they are connected or not? when I run top I do see > instances called IMAP owned by each user so I asume they are connected mail# netstat -f inet -p tcp | grep imap tcp4 0 0 mailserver.imap client01.1386 ESTABLISHED tcp4 0 0 mailserver.imap client02.1344 ESTABLISHED tcp4 0 0 mailserver.imap client01.1108 ESTABLISHED tcp4 0 0 mailserver.imap client03.54607 ESTABLISHED mail# netstat -a -f inet -p tcp | grep "*.imap*" tcp4 0 0 *.imaps *.* LISTEN tcp4 0 0 *.imap *.* LISTEN FreeBSD 5.4 with a few Outlook and KMail clients. > /jon > > Dominic Marks said the following on 2005-04-26 16:11: > >On Tuesday 26 April 2005 14:58, Jon wrote: > >>Hi, > >> > >>Im using dovecote as my IMAP interface. However i do have a lot of imap > >>instances. its only 7 user using the system as i get this. please advice. > > > >Having lots of processes running isn't automatically a bad thing, but you > > do > > > >seem to have quite a lot of imap and imap-login processes, so: > >>From a dovecot.conf on a server I run being used by about 7 people: > > > > (Comments are from dovecot-sample.conf) > > > ># Should each login be processed in it's own process (yes), or should one > ># login process be allowed to process multiple connections (no)? Yes is > > more # secure, espcially with SSL/TLS enabled. No is faster since there's > > no need # to create processes all the time. > >login_process_per_connection = no > > > >So if security is less of a concern than having many processes running, > > you should set this to no. > > > ># Number of login processes to create. If login_process_per_user is > ># yes, this is the number of extra processes waiting for users to log in. > >login_processes_count = 1 > > > >I set this low because I don't need the extra processes. > > > ># Maximum number of extra login processes to create. The extra process > > count # usually stays at login_processes_count, but when multiple users > > start # logging in at the same time more extra processes are created. To > > prevent # fork-bombing we check only once in a second if new processes > > should be # created - if all of them are used at the time, we double > > their amount until # limit set by this setting is reached. This setting > > is used only if # login_process_per_use is yes. > >#login_max_processes_count = 128 > > > >You might want to set this to something like 4? > > > ># Maximum number of connections allowed in login state. When this limit is > ># reached, the oldest connections are dropped. If login_process_per_user > ># is no, this is a per-process value, so the absolute maximum number of > > users # logging in actually login_processes_count * max_logging_users. > >#login_max_logging_users = 256 > > > >Probably no need to worry about this. > > > >>1230 ? S 0:00 imap-login > >> 1309 ? S 0:00 imap-login > > > > <snip> > > > >> 2387 ? S 0:00 imap-login 3095 ? S 0:00 imap > >> 3096 ? S 0:00 imap-login > >> > >>/jon > > > >Other things to think about: > > > >Are the mailboxes being accessed via Webmail? > >What Mail application are your users using? > >Have you checked what state the connections are in? > > > >HTH, -- Dominic GoodforBusiness.co.uk I.T. Services for SMEs in the UK.

1 0

[Dovecot] can't chroot "auth process" (dovecot-1.0-test68)
by John Wong 26 Apr '05

26 Apr '05

OS: OpenBSD/i386 dovecot: dovecot-1.0-test68 dovecot can not start, when i chroot "auth process" can i defined the "auth-work.XXX" unix socket path?? mail.log ----------------------------------------- Dovecot v1.0-test68 starting up auth(default): mysql: Connected to (null) (mail) Auth process died too early - shutting down auth(default): net_connect_unix(/var/dovecot//auth-work.12922) failed: No such file or directory child 12922 (auth) returned error 89 ----------------------------------------- dovecot.conf ----------------------------------------- base_dir = /var/dovecot/ protocols = imap imaps pop3 pop3s ssl_cert_file = /etc/ssl/certs/mail.crt ssl_key_file = /etc/ssl/private/mail.key ssl_parameters_file = /var/dovecot/ssl-parameters.dat disable_plaintext_auth = no login_dir = /var/dovecot/login login_user = _dovecot login_processes_count = 1 valid_chroot_dirs = /var/spool/postfix/var/mail mail_debug = yes default_mail_env = maildir:%h mmap_no_write = yes protocol imap { } protocol pop3 { } auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb sql { args = /etc/dovecot-sql.conf } userdb static { args = uid=32765 gid=32765 home=/var/spool/postfix/var/mail/%u/./ } user = _dovecot-auth chroot = /var/spool/postfix } -----------------------------------------------------------

1 0

[Dovecot] whoson support
by Simon Dick 26 Apr '05

26 Apr '05

Is anyone working on integrating whoson support into dovecot? I would do it myself but currently I'm short on time and will need that support, anyone got any tips? :) -- Simon Dick <simon(a)advantage-interactive.com>

1 0

[Dovecot] 1.0-stable update
by Timo Sirainen 26 Apr '05

26 Apr '05

Just a note, I backported some larger mbox changes from 1.0-test67. Hopefully works, but if you're going to try it test it well first :) Should fix some issues related to X-IMAP/X-IMAPbase header handling and maybe some other mbox related problems as well.

3 6

[Dovecot] configuration problem: maildir folders and messages not found
by Bram Mertens 26 Apr '05

26 Apr '05

Hi Perhaps I've been going too far OT in my previous thread or perhaps I just didn't explain my problem clear enough so forgive me for trying again. I have configured fetchmail to fetch my mail from my ISP's POP3-server. I have set up procmail to filter messages and deliver all non-filtered messages to the folder ".IN-catchall/" in "$HOME/Maildir" After sending some test messages the "Maildir" folder in my home-folder looks like: m8ram@medion:~$ tree -a Maildir Maildir |-- .IN-catchall | |-- cur | |-- new | | `-- 1114356268.8424_0.medion | `-- tmp |-- .IN-testing | |-- cur | |-- new | | |-- 1114354955.6900_0.medion | | `-- 1114356175.8292_0.medion | `-- tmp |-- .INBOX | |-- .IN-testing | | |-- cur | | |-- new | | | |-- 1114354955.6900_0.medion | | | `-- 1114356175.8292_0.medion | | `-- tmp | |-- .imap.index | |-- .imap.index.data | |-- .imap.index.log | `-- .imap.index.tree |-- .customflags |-- IN-catchall |-- cur |-- new `-- tmp 16 directories, 11 files Because I have been using the mbox format to test dovecot so far I had to modify my dovecot configuration but no matter what I try none of the messages above appear in evolution or thunderbird. Can anybody tell me what I need to add/remove/change in my config? I'm running: m8ram@medion:~$ /usr/sbin/dovecot --version 0.99.14 on debian testing /etc/dovecot/dovecot.conf contains the following: protocols = imap login = imap login = pop3 mail_extra_groups = mail default_mail_env = maildir:/%h/Maildir auth = default auth_mechanisms = plain auth_userdb = passwd auth_passdb = pam auth_user = root When using mbox I used: default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u I also tried the following for maildir: default_mail_env = maildir:~/Maildir default_mail_env = maildir:/home/%u/Maildir But neither worked. TIA Bram -- # Mertens Bram "M8ram" <bram-mertens(a)linux.be> Linux User #349737 # # debian testing kernel 2.6.8-1-686 i686 512MB RAM # # 13:39:03 up 30 days, 19:52, 13 users, load average: 0.49, 0.50, 0.39 #

2 4

[Dovecot] ldap uid with static gid problem
by Farkas Levente 26 Apr '05

26 Apr '05

hi, i'd like to use dovecot to authenticate from ldap. in ldap each user has it's uniq uid and gid. unfortunately with postfix we can't use uniq uid/gid since in this case we have ot create all user's home in advance. so we decided to use uniq uid and a common gid in postfix since in this case postfix can create new users maildir and deliver new mails. so i'd like to use everyone's own uid in dovecot, but a common gid (same as in postfix). but how can i do so? i read the wiki, but the problem is if i use: auth_userdb = ldap /etc/dovecot-ldap.conf then i have to define ldap attrib name in dovecot-ldap.conf: user_attrs = mail,,,uid,uidNumber,gidNumber what should i use in the last field in user_attrs? or it's not possible with dovecot to define this? i'd be very said in this case:-( any advice? thanks in advance. yours. -- Levente "Si vis pacem para bellum!"

2 1

[Dovecot] libexecdir and localstatedir problem
by Marten Lehmann 26 Apr '05

26 Apr '05

Hello, I'd really like to define the finale libexecdir and localstatedir through the configure-script. But the Makefiles are rewriting them. Not $libexecdir is used, but $pkglibexecdir. And $pkglibexecdir is always defined as $libexecdir/dovecot. But I don't want this trailing "/dovecot". Same with localstatedir. I want dovecot to use a certain path. But to this path, a "run/dovecot" is appended. I surely could build some patchfiles to change the Makefiles. But it would be easier, if you could add a new directive --pgklibexecdir to the configure-script. I don't know where the "run/dovecot" is defined, but it would also be very fine to set it in the configure-script (specially when upgrading to new releases) instead of defining them all in the dovecot.conf (base_dir, login_dir). Regards Marten

2 5

[Dovecot] 1.0-test68 released
by Timo Sirainen 26 Apr '05

26 Apr '05

http://dovecot.org/test/ Recommended update, has had a lot of testing today. No new big features. Changes: - LDAP authentication should work finally? - Some header lookup fixes that should fix sort/threading issues - Don't crash with 0-byte size mboxes - Transaction log fixes. Also rotate .log file to .log.2 file, allowing more history and less "transaction log file lost" messages. - SEARCHing multiple headers might have crashed - mbox: When first message was expunged we might have gotten "uid-last unexpectedly lost" errors. - recent flag counter wasn't updated in index file header always even if the recent flags were removed - UIDVALIDITY changes are handled more transparently - Added --rundir configure option (not actually tested, does it work? :) - etc.

6 12

[Dovecot] INBOX can't be deleted
by Marten Lehmann 26 Apr '05

26 Apr '05

Hi, surely it can't and it shouldn't. I'm just wondering why a check for "INBOX" is done in src/imap/cmd-delete.c AND src/lib-storage/index/maildir/maildir-storage.c. The first is clear because it gives an imap-error to the client. But for which case is the check in maildir-sorage.c? Just to be absolutely sure? The reason for me to ask is, because I need to disable deletions for five folders: Drafts, Infected, Junk, Sent and Trash. A certain webmail-interface and spamfilter will rely on these folders, so nobody shall be able to delete or rename them. First I placed the checks in cmd-delete.c. Should I place them in maildir-storage.c additionally? In normal circumstance, the check in maildir-storage.c should never be reached, right? Regards Marten

2 1

[Dovecot] Dovecot Stable (or: When is 1.0 coming to a server near you?)
by Rich West 26 Apr '05

26 Apr '05

I'm mainly just curious, but what version of dovecot is considered to be stable enough to be running in a production environment? We're running the 0.99.13 version shipped with FC3 and, while experiencing great performance gains over UW-IMAP, we have hit a couple of snags here and there (random and infrequent characters at the beginning of a mailbox, periodic duplication of a message here and there, etc). I figure we should upgrade to something a bit more current, but I am not sure what the "recommended" verion would be.. Also, perhaps more important, what's the roadmap to getting 1.0 finalized? What's the timeframe? :-) -Rich

2 1

[Dovecot] -test68, -stable and ldap
by Thomas Hummel 25 Apr '05

25 Apr '05

Hello Timo, Thanks to your patches, LDAP authentication now works with -test68. However, I'm still experiencing a segmentation fault with today's snapshot of -stable, as shown in the following gdb backtrace. [I'm still running FreeBSD 5.3] Can you see where it comes from ? Is it because the ldap new code (as in -test68) hasn't been backported into -stable yet ? Thank you, -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau -- (gdb) n 186 userdb_preinit(); (gdb) n 187 passdb_preinit(); (gdb) n Program received signal SIGSEGV, Segmentation fault. auth_cache_parse_key (query=0x0) at auth-cache.c:39 39 for (; *query != '\0'; query++) { (gdb) bt full #0 auth_cache_parse_key (query=0x0) at auth-cache.c:39 str = (string_t *) 0x806a100 key_seen = '\0' <repeats 255 times> key = 0 '\0' #1 0x08055456 in passdb_ldap_preinit (args=0x8075100 "/usr/local/dovecot/etc/dovecot-ldap.conf") at passdb-ldap.c:237 conn = (struct ldap_connection *) 0x8078010 #2 0x08054b8d in passdb_preinit () at passdb.c:152 p = (struct passdb_module **) 0x8068914 name = 0x806b078 "ldap" args = 0x806891c "ÒP\006\b\bT\005\bdT\005\bxT\005\bøR\005\b\204S\005\bíQ\006\b" #3 0x0805108b in main (argc=1, argv=0x806a100) at main.c:187 No locals. (gdb) --

1 0

[Dovecot] HA heartbeat scripts
by Nigel Metheringham 25 Apr '05

25 Apr '05

Has anyone worked with getting dovecot to work in a HA cluster using heartbeat? If so do you have any magic startup scripting or other special sauce? [I'll be playing with this over the next couple of days, although concentrating on pop for our requirements. I can post any scripting I produce] Nigel. -- [ Nigel Metheringham Nigel.Metheringham(a)InTechnology.co.uk ] [ - Comments in this message are my own and not ITO opinion/policy - ]

1 0

[Dovecot] Limiting IP range access
by Luigi Rosa 25 Apr '05

25 Apr '05

First of all, MANY compliments for this fantastic software. Now the question: is it possibile to limit the access to dovecot (or a single service) to a specified range of IPs? Basically, I am thinking about an IP-based ACL. Thankyou in advance. Ciao, luigi -- A beer delayed is a beer denied.

4 3

[Dovecot] Quota
by Timo Sirainen 25 Apr '05

25 Apr '05

If anyone's interested about implementing quota code for Dovecot (there were a few of you before! :), now it's finally your chance to do it quite easily. With the API changes committed today to CVS, it's now much easier to write plugins that modify mail-storage behavior. So, I finally fixed my half-working quota plugin that had been lying there for a while. It implements the RFC2087 quota commands for IMAP, a generic quota API that should allow pretty much any kind of quota implementation, and the actual quota limit checking for saving and copying mails. As an example there's an implementation which just scans through all files in a directory and sums their sizes. Currently it can be made to work only when starting from command line, eg.: export QUOTA=~/mail:storage=1024 export MODULE_DIR=/usr/local/lib/dovecot/imap ./imap The QUOTA variable is passed to the quota implementation. In this case quota-dirsize reads it, figures out that ~/mail is the directory where to count the files, and 1024kB is the maximum for quota. I think I'll change the master process code so that any unrecognized varibles that come from userdb are fed to imap/pop3 processes. That way you could simply make the userdb return the quota value (and set other user-specific settings as well). Available from: http://dovecot.org/patches/1.0/quota.tar.gz Unpack under dovecot/src, compile command is at the beginning of quota-plugin.c I'm still wondering where this code should be placed. Maybe the core implementation should be built into Dovecot, while the different quota implementations would be plugins? ..And even better would be if Dovecot's build process was modified so that it's possible to specify with configure script what to compile in and what to compile as plugins.. Anyway, comments welcome, Maildir++ implementation welcome, other implementations welcome as well :)

3 8

[Dovecot] File isn't in mbox format - Couldn't open INBOX
by Rich West 24 Apr '05

24 Apr '05

While I saw another thread on the list similar to the issue I was experiencing (http://dovecot.org/pipermail/dovecot/2005-February/006168.html) I was wondering if there was a way around this problem (the thread simply suggested upgrading, but are the later version (specifically the 1.0-test releases) ready for prime time?)... We're periodically having this with some users (not sure what client they are using, but I am pretty sure it is MS Outlook) where the inbox is in near perfect shape except for some extra characters at the beginning of the file. POP or IMAP delivery fails with an error stating "File isn't in mbox format - Couldn't open INBOX". It looks like those characters are of a previous message that was not completely removed from the file, and those characters seem to throw everything out of wack.. It's easily correctable by removing the bogus characters from the beginning of the file, but that gets annoying quickly.. -Rich

4 7

[Dovecot] about filtering and dovecot
by Bram Mertens 24 Apr '05

24 Apr '05

Hi I would like to set up a local mailserver but I'm getting lost with all the available options. As I have already decided to use dovecot I hope someone here will be able to point me to the right docs/HOWTO's/... Here's my wish-list: 1) download mail from my ISP's POP3-server 2) scan with spamassassin 3) scan with ClamAV 4) filter messages (mailing lists/sender/...) 5) store messages in dovecot 6) be able to read messages on my desktop (where all of the above will be running) and on my laptop 7) be able to send messages (currently using evolution) from both my desktop and laptop so sent messages are stored in dovecot (the idea is to be able to see all sent messages on both PC's) I have already created a test-account om my ISP's POP3-server, installed and configured fetchmail and dovecot. Exim has been installed as well but I haven't touched it's configuration yet. Running fetchmail manually collects the mail and stores it in /var/mail/m8ram where dovecot finds it. So I would like to know (how to find out) how I can achieve 2), 3), 4) and 7). I have looked around and have discovered that there are many programs that can do some or all of this. But I haven't been able to figure out how to get them to work with dovecot. e.g. I don't understand what I would have to change to dovecot's config if exim or procmail or whatever moves certain messages to different folders (or even where these folders would be created). Perhaps I'm missing a HOWTO that explains all this, if so please let me know. TIA Bram -- # Mertens Bram "M8ram" <bram-mertens(a)linux.be> Linux User #349737 # # debian testing kernel 2.6.8-1-686 i686 512MB RAM # # 12:40:02 up 26 days, 18:53, 9 users, load average: 0.56, 0.46, 0.29 #

6 9

RE: [Dovecot] IMAP EXPUNGE disconnect/box hang - Fedora Core 2, Squirrelmail and Evolution
by Schettino, John Charles 24 Apr '05

24 Apr '05

Well, I just built and installed the 1.0 stable w/o tags version from source, and so far, it's not hanging/crashing the system - if this is the fix, I'm all over it :D Context: this is my problem: Correction: I'm running yum.log:03/07/05 05:48:28 Updated: dovecot 0.99.14-1.1.fc2.rf.i386 - Sorry about that. I'm a bit befuddled by this behavior. I've been using dovecot for close to a year, and recently the Fedora Core 2 Update: dovecot-0.99.13-4.FC2 build came in via yum. Since then I occasionally get this EXPUNGE disconnect error. When the error hits, the box does not crash but I can no longer log in*, nor start any new processes. I happen to have gkrellm running and I see a slow but steady climb in the # of processess. The only way to recover the box is to do a hard reset, as I cannot log in, nor su - to do a shutdown. In one case I happened to have a root shell open, and I still could not do a shutdown. Any ideas as to what I should do with this? As long as I don't expung everything is fine, but when I do expunge (move something or a filter runs in squirrelmail, or Action/Expunge in Evolution) sometimes it works fine, sometimes I get this error and a weird zombie state. It was all rock solid before this new version. Suggestions welcome - I don't seem to be getting any logging when it goes bad, perhaps I can up the log level? I'm more then happy to build the current dovecot from source, and if I should post this to some Fedora list, point me at it :D

3 3

[Dovecot] Dovecot LDA with sieve scripting
by Timo Sirainen 23 Apr '05

23 Apr '05

I also placed dovecot-lda-0.1.tar.gz in http://dovecot.org/test/. It's also in dovecot-lda module in CVS. It's based on the same deliver binary that exists in Dovecot's sources, but I've also plugged in CMU Sieve (mostly because it was the easiest one to plug in). The code could be much prettier, but it works anyway :) I think at some point I'm going to try to make the Sieve stuff a plugin on top of the normal delivery binary. (Dovecot in general should have some pretty plugin architecture, so you could just unpack them in some directory then do ./configure --with-builtin-plugins=quota-maildir,lda-sieve --with-external-plugins=sql,ldap,quota-sql) configure needs --with-dovecot=../dovecot-1.0-test68 option. So, usage goes like I mentioned in my previous mail (uhm. should put it into README): http://dovecot.org/list/dovecot/2005-March/006512.html Sieve script is assumed to be in ~/.dovecot.sieve file. It's automatically compiled to ~/.dovecot.sievec whenever timestamp changes. If it doesn't exist, mail is stored normally into INBOX.

1 0

[Dovecot] glue for HPUX
by rja＠surfeu.fi 23 Apr '05

23 Apr '05

Hi! Have anyone successed with hp-ux (how) ? I've compiled 0.99.14 with gcc-3.4.3 at hpux 11.11. I can telnet to port 143 and connection stays up, but I don't get any response back. It seems like dovecot "doesn't see" what I type in telnet. I tried to debug... # ps -ef | grep dovecot # gdb -tui -p 17185 /usr/local/sbin/dovecot Attaching to program: /usr/local/sbin/dovecot, process 17185 [ No Source Available ] warning: reading `r3' register: No data 0x77faff30 in _poll_sys+0x10 () from /usr/lib/libc.2 (gdb) up #1 0x77fba9ac in poll+0x6c () from /usr/lib/libc.2 (gdb) up |163 ret = poll(data->fds, data->fds_pos, msecs); >|164 if (ret < 0 && errno != EINTR) |165 i_warning("poll() : %m"); #2 0x14310 in io_loop_handler_run (ioloop=warning: reading `r8' register: No data 0x0) at ioloop-poll.c:163 (gdb) This works fine... # MAIL=mbox:~/mail /usr/local/libexec/dovecot/imap * PREAUTH [CAPABILITY IMAP4rev1 SORT... I tried also 1.0, but it hangs if .conf file is larger than ~400 bytes and the the process never goes into the background. So - I have same problems than Ajaxster... http://dovecot.org/list/dovecot/2004-December/005612.html Best Regards /Jim

2 1

[Dovecot] password_verify in test67 with ldap
by Thomas Hummel 23 Apr '05

23 Apr '05

Hello Timo, your patch introducing pass_attr_names and user_attr_names fixed the problem of the 'shared' attr_names member of [passdb|userdb]_ldap_conn as I answered in the relative thread. Now I think there is a problem while comparing user-provided and ldap-provided passwords causing a false 'password mismatch' situation, while using PLAIN mechanism with LDAP authentication. As a matter of fact, the user provided by the user, as read in the 'mech_plain_auth_continue' function is passed as an argument in the 'auth_request_verify_plain' function which, in turns pass it to the function pointed to by 'passdb->verify_plain' (that is 'ldap_verify_plain') which doesn't use it [instead maybe of setting the 'passdb_ldap_request' 'password' field with it ?]. So once back from the LDAP request, when in 'handle_request' we call 'password_verify', the password we try to match against the one read in the LDAP db is null. Did I get it right ? Thanks -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

2 2

[Dovecot] dovecot-stable-latest.tar.gz - Login process died too early - shutting down
by websafe 23 Apr '05

23 Apr '05

Hello, i've installed dovecot: ./configure \ --prefix=/usr \ --sysconfdir=/etc \ --localstatedir=/var \ --enable-debug \ --with-storages=maildir && make && make install groupadd dovecot useradd -s /bin/bash -g dovecot dovecot ok, in /etc/dovecot.conf I have: # grep -v "#" /etc/dovecot.conf ###################################################################### protocols = imap ssl_disable = yes default_mail_env = maildir:/home/%u/Maildir protocol imap { login_executable = /usr/local/libexec/dovecot/imap-login mail_executable = /usr/local/libexec/dovecot/imap mail_executable = /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_modules = /usr/local/lib/dovecot/imap } protocol pop3 { } auth_executable = /usr/local/libexec/dovecot/dovecot-auth auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb = shadow userdb = passwd user = root } ###################################################################### When I try to run: dovecot i get # tail -f /var/log/maillog: Apr 20 19:02:02 sww dovecot: Dovecot v1.0-stable starting up Apr 20 19:02:03 sww dovecot: Login process died too early - shutting down Apr 20 19:02:03 sww dovecot: imap-login: Panic: Leaked file fd 5: dev 0.6 inode 7 Apr 20 19:02:03 sww dovecot: auth(default): Panic: Leaked file fd 5: dev 0.6 inode 7 Apr 20 19:02:03 sww dovecot: child 21550 (login) killed with signal 6 Apr 20 19:02:03 sww dovecot: child 21549 (login) killed with signal 6 Apr 20 19:02:03 sww dovecot: child 21548 (login) killed with signal 6 Apr 20 19:02:03 sww dovecot: child 21547 (auth) killed with signal 6 I've got dovecot working on two other machines without any problem... Is there a way to fix this? Maybe some libs are missing? -- websafe -- websafe, http://www.partybitchez.org/

2 1

[Dovecot] vpopmail
by Reed L. O'Brien 23 Apr '05

23 Apr '05

So I now am able to log into dovecot, authenticate but I can't see anything. Every command after login says NO error or the really cryptic just plain 'NO' I am authenticating through vpopmail and the mail users are in /home/vpopmail the dir is owned vpopmail:vchkpw and are drwx------ do I need to change something there? ( Ihave tried drwxrwxrwt perms also) Thanks r # nc localhost 143 * OK dovecot ready. a login reed(a)email.com passwd a OK Logged in. a select INBOX a NO a select cur a NO Mailbox doesn't exist: cur a select . a NO Invalid mailbox name a . a BAD Error in IMAP command .: Unknown command. # nc localhost 143 * OK dovecot ready. a login reed(a)email.com passwd a OK Logged in. a select % a NO Mailbox doesn't exist: % a CREATE INBOX a NO Internal error occured. Refer to server log for more information. [2005-04-20 11:31:25] Reed L. O'Brien Systems Engineer Focus Data Solutions, Inc. www.focusdatasolutions.com t.703.836.0080/f.703.299.0892

2 1

[Dovecot] feature request: login in process title
by Marten Lehmann 23 Apr '05

23 Apr '05

Hello, I'm a bit afraid of users, the might slow down the server because of search requests to the imap-server on very large mailboxes. Even with a performant index, this could cause a lot of cpu and i/o-load. Is it possible to include the login-name in the imap process, so that a "ps ax" doesn't just give "imap", but e.g. "imap test(a)example.com"? Maybe it's of general interest to see in the title at which stage an imap-process is working. Regards Marten

3 2

[Dovecot] creating subfolders without preceding inbox wanted?
by Marten Lehmann 23 Apr '05

23 Apr '05

Hello, today I accidentally created a subfolder "Trash" instead of INBOX.Trash. No error was given, the creation lead to the folder ".Trash". If I know this folder, I can also select it. But a "list * * " doesn't show the Trash folder. How could I ever find this folder by the imap-procotol if I don't know it's name? Is this the correct behaviour? Or shouldn't imap simply disallow the creation of such folders, but only with preceding "INBOX."? Regards Marten

2 1

[Dovecot] IMAP EXPUNGE disconnect/box hang - Fedora Core 2, Squirrelmail and Evolution
by Schettino, John Charles 22 Apr '05

22 Apr '05

I'm a bit befuddled by this behavior. I've been using dovecot for close to a year, and recently the Fedora Core 2 Update: dovecot-0.99.13-4.FC2 build came in via yum. Since then I occasionally get this EXPUNGE disconnect error. When the error hits, the box does not crash but I can no longer log in*, nor start any new processes. I happen to have gkrellm running and I see a slow but steady climb in the # of processess. The only way to recover the box is to do a hard reset, as I cannot log in, nor su - to do a shutdown. In one case I happened to have a root shell open, and I still could not do a shutdown. Any ideas as to what I should do with this? As long as I don't expung everything is fine, but when I do expunge (move something or a filter runs in squirrelmail, or Action/Expunge in Evolution) sometimes it works fine, sometimes I get this error and a weird zombie state. It was all rock solid before this new version. Suggestions welcome - I don't seem to be getting any logging when it goes bad, perhaps I can up the log level? I'm more then happy to build the current dovecot from source, and if I should post this to some Fedora list, point me at it :D

1 0

[Dovecot] IMAP EXPUNGE disconnect/box hang - Fedora Core 2, Squirrelmail and Evolution
by Schettino, John Charles 22 Apr '05

22 Apr '05

Correction: I'm running yum.log:03/07/05 05:48:28 Updated: dovecot 0.99.14-1.1.fc2.rf.i386 - Sorry about that. I'm a bit befuddled by this behavior. I've been using dovecot for close to a year, and recently the Fedora Core 2 Update: dovecot-0.99.13-4.FC2 build came in via yum. Since then I occasionally get this EXPUNGE disconnect error. When the error hits, the box does not crash but I can no longer log in*, nor start any new processes. I happen to have gkrellm running and I see a slow but steady climb in the # of processess. The only way to recover the box is to do a hard reset, as I cannot log in, nor su - to do a shutdown. In one case I happened to have a root shell open, and I still could not do a shutdown. Any ideas as to what I should do with this? As long as I don't expung everything is fine, but when I do expunge (move something or a filter runs in squirrelmail, or Action/Expunge in Evolution) sometimes it works fine, sometimes I get this error and a weird zombie state. It was all rock solid before this new version. Suggestions welcome - I don't seem to be getting any logging when it goes bad, perhaps I can up the log level? I'm more then happy to build the current dovecot from source, and if I should post this to some Fedora list, point me at it :D

1 0

Re: [Dovecot] 1.0 release
by Roger Marquis 22 Apr '05

22 Apr '05

> See http://www.dovecot.org/list/dovecot/2005-January/006144.html If anyone on this list is running 1.0 under FreeBSD inetd I'd really like to know if the syslog/ip address bug has been fixed. We're hoping to use dovecot with pop before smtp but 0.99's dovecot-auth + dovecot--inetd logs the local server's ip address instead of the remote client ip. -- Roger Marquis Roble Systems Consulting http://www.roble.com/

1 0

[Dovecot] How to setup dovecot under MACOSX?
by CHENG Gao 22 Apr '05

22 Apr '05

I have built Dovecot 1.0 test 67 under MACOSX. But I can not find any tutorial on how to setup it. Please allow me to explain my need. I want to setup a local imap server, and then import all my email from Mail.app and Gnus into it. Thus I can choose to read emails with any client. It's only a single user environment. Could anyone instruct me if there is any tutorial for Dovecot MACOSX setting? Thanks in advance.

2 1

[Dovecot] maildir creation
by Renzetti Federico 22 Apr '05

22 Apr '05

Hi all, this is my first post to the list and sorry for my english. I have a mail server based on qmail+dovecot+ldap with virtualdomains and maildir stored in /var/vmail/<DOMAIN>/<USERNAME>/Maildir. When I create a user on LDAP I don't create maildir too. So if I log-in with dovecot (143,110) I hope dovecot creates maildir for users but this is not I get: maildir are not created... dovecot.conf .... default_mail_env = maildir:/var/vmail/%d/%n/Maildir .... There is a way to create automatically maildir for users? Thanks all. -- Renzetti Federico System/Network Administrator RedHat Certified Engineer Fabaris S.r.l. Tel. +39 0765 22181 - Fax +39 0765 410100 Via G. Mameli, 90 02047 Poggio Mirteto (RI) Filiale: Viale dell'Università, 25 00185 Roma (RM) www.fabaris.it

4 3

[Dovecot] 1.0 release
by Patrick Avery 22 Apr '05

22 Apr '05

I'm dying to use the 1.0 capability to use more than one mysql user pasword database. However, I'm too chicken to use 1.0-test in a production environment. Does anyone know if there is a planned release date for 1.0? Or can anyone say how risky it is to use 1.0-test?

6 9

[Dovecot] Disable multiple POP3 logins
by Jesus Salvo Jr. 21 Apr '05

21 Apr '05

Hi, With some POP3 servers, when you login more than once, the POP3 server says "Err: multiple login". How can I achieve that with dovecot ? For example: I login to my POP account that is hosted by the ISP: $ telnet pop.x.com 110 Trying x.x.x.x... Connected to pop.x.com (x.x.x.x). Escape character is '^]'. +OK <25628.1113981451@bne022mfe> USER mb13536d +OK PASS testcase +OK LIST +OK 1 4608 . STAT +OK 1 4608 While that pop3 login is still active, I run another telnet session to login again to the same account. $ telnet pop.x.com 110 Trying x.x.x.x... Connected to pop.x.com (x.x.x.x). Escape character is '^]'. +OK <11709.1113981546@bne021mfe> USER mb13536d +OK PASS testcase -ERR multiple login Connection closed by foreign host. Thanks, John

3 2

[Dovecot] assertion failed in 1.0-stable
by Martin Preen 21 Apr '05

21 Apr '05

Hello everybody, I get the following assertion error with dovecot 1.0-stable when accessing a large folder: file istream-raw-mbox.c: line 383 (istream_raw_mbox_get_body_size): assertion failed: (rstream->body_offset != (uoff_t)-1) There is no error when using dovecot 0.99.14. Any ideas ? Martin ----------------------------------------------------------------- Martin Preen, Universitaet Freiburg, Institut fuer Informatik Georges-Koehler-Allee, Geb.52, Zi.00-006, 79110 Freiburg, Germany phone: ++49 761 203-8250 preen(a)informatik.uni-freiburg.de fax: ++49 761 203-8242 www.informatik.uni-freiburg.de

2 2

[Dovecot] message status changed from new to old on read
by Andrew Pimlott 21 Apr '05

21 Apr '05

Hi. I'm new to IMAP, but just tried uw-imapd and then dovecot in conjuction with offlineimap. I'm using Debian package version 0.99.14-1 and have my mail in mbox format. One of the first things that annoys me about both programs is that as soon as you read a mailbox over imap, the imapd changes all "new" messages to "old". It seems to have the assumption that the IMAP client is "reading" the messages, but particularly in the case of offlineimap, this assumption is not justified: I might not read the message on the client on which I've just synced, I might read it on the server or another client. So I would like dovecot to leave the mailbox alone, and leave it up to the client to write any changes to message status. Is there any option to dovecot that would accomplish this? While experimenting, I noticed that dovecot sometimes doesn't notice changes to the status made directly on the server. For example, if I create new mbox mailbox with one message (initially "new"), and access it with imap (using mutt in this example), it shows up "new" in the client. When I next access it with imap, it shows up "old", because dovecot modified the status as described above. If I then run mutt directly on the mailbox and change the status back to "new", then access it with imap, it still shows up "old". If I then remove the .imap directory containing the caches, it is back to "new". I assume that dovecot is supposed to pick up changes made directly on the server, right? Thanks for your help, Andrew

2 2