- dovecot - dovecot.org

[Dovecot] Switch from MySQL/CourierMail to MySQL/Dovecot
by Robert Moskowitz 11 Dec '12

11 Dec '12

Hello, new here. I am a Centos/Fedora user, and for the past 3 years have been running my mail server using Postfix/MySQL/CourierMail/Squirrelmail on Fedora. The current incantation of the tutorial is at: http://www.howtoforge.com/virtual-users-and-domains-with-postfix-courier-my… Well it is time to rebuild my mailserver; this time on Centos 6.3. My goal is to use supplied rpms, not to build my own (and rebuild everytime there is an important update). So I am pulling quotas which has been a pain anyway, and I am investigating using Dovecot in place of CourierMail. In Centos 6.3, the version of Dovecot is: 2.0.9-2 I am looking for a tutorial to assist in the setup, as I am nowhere an expert on any of this (I am a communications security expert in the IETF and IEEE 802). There are a couple items that I have come to depend on in my current setup that are musts in anything new: Virtual user/domain That is, not only virtual domains, but also users defined by domain. So in the MySQL user table, the email value is set to user@domain. Thus a user can receive/send mail from multiple domains with the same addr and only those domains defined for the user in the user table. Obviously there is no coupling of Linux user accounts and email accounts. CourierMail is storing mail under /home/vmail/domain/user/... Encrypted passwords The passwords in the user table in MySQL are encrypted. This will be used to auth the user for POPing or IMAPing and sending their mail. I have encountered a few tutorials where it seems like passwords are stored in the clear? Anyway, not much else! Well as far as the user interface is concerned. Postfix with clamav and spamassassin and maybe one or two extras. And SquirrelMail for Webmail. A better gui than phpMyAdmin for maintaining the tables would be nice, but I don't have a lot of users, so it works well enough. Can someone point me to a tutorial best suited to my needs? Also any firewall rules, as I don't want to turn off iptables (and ip6tables) and any SELinux policy rules to add. Oh, and IPv6 will be a must in the near future, so anything needed to ensure IPv6 working right as well. Thanks

2 3

[Dovecot] Automatically Cleaning Kerberos Credential Cache Files
by Maura Dailey 10 Dec '12

10 Dec '12

I'm in a situation here at work where I'm trying to support a mixed network of OS X and RHEL desktop machines with a Postfix/Dovecot combination. - user account information is stored in LDAP - user credentials are in MIT Kerberos - server is running RHEL 6/Dovecot 2.0.9/Postfix 2.6.6 I am currently using the PAM passdb module to authenticate my users (I began to have trouble with using GSSAPI directly). After I implemented it, a few weeks later, I noticed that some users were no longer getting their mail if they hadn't logged in during the past day. Postfix's mailq showed that hundreds of messages were backing up in the queue. I eventually tracked it down to leftover Kerberos credential cache files (/tmp/krb5cc_????) sitting in /tmp on the mail server. The presence of expired credential files was preventing Postfix from delivering mail to those users' mail spools. If I delete the credential files manually, Postfix immediately delivers the queued emails. Currently, I have a cron job deleting the files manually every night. Obviously, this is a cruddy solution. I have Dovecot configured on a RHEL 6 box. The Pam stack on a RHEL 6 machine uses sssd (pam_sss.so) for authentication with Kerberos, not pam_krb5.so. I'm trying to track down which piece of the puzzle is responsible for cleaning up leftover credential caches. Is there a configuration option I can pass to Dovecot's passdb directly to clean up these cache files? Do others generally have more success using a custom PAM stack with pam_krb5.so instead of pam_sss.so? Poring over sssd's configuration options didn't reveal anything useful. I'm still not sure why Postfix even cares if there are expired credential cache files in /tmp at all. I'm back to trying GSSAPI directly again as well in the meantime on a few test clients. When I used that in the past, users were getting issued duplicate Kerberos tickets and users were forced to log into the mail server directly using SSH after a day in order to get their mail to work (seemingly a related issue). If I get those same errors again, I'll start another thread. The output of doveconf -N: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.14.1.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.3 (Santiago) ext4 auth_cache_size = 10 k auth_cache_ttl = 5 hours auth_default_realm = server.com auth_gssapi_hostname = hostname.server.com auth_krb5_keytab = /etc/dovecot/dovecot.keytab auth_mechanisms = gssapi plain auth_realms = server.com auth_username_format = %n auth_verbose = no disable_plaintext_auth = yes listen = * mail_location = maildir:/var/spool/mail/%u mail_privileged_group = mail mbox_read_locks = fcntl mbox_write_locks = fcntl namespace { inbox = yes location = prefix = separator = / type = private } passdb { driver = pam } protocols = pop3 imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } ssl = yes ssl_cert = </usr/share/ssl/private/mail.server.com.pem ssl_key = </usr/share/ssl/private/mail.server.com.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep mail_plugins = " listescape" } Thanks for any pointers, Maura Dailey maura(a)eclipse.ncsc.mil

2 1

[Dovecot] dsync help?
by Torbjorn Astlind 10 Dec '12

10 Dec '12

Hi all, I have dovecot serving aprox 200 users through mbox, but the time has come to migrate to a new server, and to use Maildir. Using rsync from the old server I get all user data, i.e /home/*, and inboxes i.e /var/mail/* to a new server. This has worked well for some time as backup. The dsync should convert everything to Maildir, and it does... to an extent. (linebrakes for easy viewing) What I see, is that often, the /home/mail/xxx is NOT resulting in /home/xxx/Maildir/cur All mailboxes from /home/xxx, are properly converted to /home/xxx/Maildir/.name_of_ box Am I misunderstanding something? I get it to work sometimes if I delete the ~/Maildir completely before doing the dsync. All, and any help most welcome, Torbjörn for i in `cat /home2/torbjorn/SCRIPTS/userlist.txt`; do dsync -D -v -f -u $i -c /etc/dovecot/alt_config/10-mail.MBOX.conf backup maildir:~/Maildir; done > /home2/torbjorn/SCRIPTS/mb2mdRES.txt 2>&1 the -c 10.mail.MBOX.conf contains, the parts I think are relevant for the dsync operation: mail_location = mbox:~/home:INBOX=/home/mail/%u namespace { type = private separator = '/' inbox = yes } dsync(root): Debug: Effective uid=501, gid=501, home=/home/torbjorn dsync(root): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mbox:~/home:INBOX=/home/mail/torbjorn dsync(root): Debug: fs: root=/home/torbjorn/home, index=, control=, inbox=/home/mail/torbjorn, alt= dsync(root): Debug: Effective uid=501, gid=501, home=/home/torbjorn dsync(root): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir dsync(root): Debug: maildir++: root=/home/torbjorn/Maildir, index=, control=, inbox=/home/torbjorn/Maildir, alt= dsync(root): Debug: Namespace : /home/torbjorn/Maildir doesn't exist yet, using default permissions dsync(root): Debug: Namespace : Using permissions from /home/torbjorn/Maildir: mode=0700 gid=-1 dsync(torbjorn): Debug: Namespace : Using permissions from /home/torbjorn/home: mode=0700 gid=-1

1 0

[Dovecot] IMAP instead of Maildir on Ubuntu Precise
by Thufir 10 Dec '12

10 Dec '12

Why is dovecot using Maildir and not IMAP. Or is it using even using Maildir at all? Currently I'm using mailman, postfix and dovecot to manage a mailing list. Mail is sent to thufir(a)dur.bounceme.net which the "mail server delivery agent stack provided by Ubuntu server team" of dovecot-postfix handles fine, keeping it locally, so far as it goes. The mail ends up in /home/thufir/Maildir, which the balsa mail client reads fine, as it handles Maildir fine. However, I would like to use dovecot-imapd which is installed. However, it's not clear quite how to switch over to IMAP. I see: root@dur:~# root@dur:~# nl /usr/share/dovecot/protocols.d/imapd.protocol 1 protocols = $protocols imap root@dur:~# root@dur:~# grep protocol /etc/dovecot/dovecot.conf # Enable installed protocols !include_try /usr/share/dovecot/protocols.d/*.protocol root@dur:~# which indicates to me that IMAP is configured. So, why is mail showing up using Maildir? I'm looking at: "Once you have chosen, amend the following line in the file /etc/dovecot/dovecot.conf: protocols = pop3 pop3s imap imaps" https://help.ubuntu.com/community/Dovecot Admittedly, I've not looked too closely into Dovecot man pages as I don't want to get too deep into the weeds on that if it's not even Dovecot I need to configure. I'm assuming that it's dovecot which is using Maildir: root@dur:/etc/postfix# root@dur:/etc/postfix# grep dovecot main.cf smtpd_sasl_type = dovecot smtpd_sasl_path = private/dovecot-auth mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" root@dur:/etc/postfix# Can I force dovecot to only ever use IMAP and never use anything else? Is it maybe postfix which is using Maildir, and this is why my mail shows up as Maildir type mail? thanks, Thufir thufir@dur:~$ thufir@dur:~$ head .balsa/config -n 20 [mailbox-Inbox] Path=/var/mail/thufir Type=LibBalsaMailboxMbox Name=Inbox [mailbox-Outbox] Path=/home/thufir/Maildir/outbox Type=LibBalsaMailboxMbox Name=Outbox [mailbox-Sentbox] Path=/home/thufir/Maildir/sentbox Type=LibBalsaMailboxMbox Name=Sentbox [mailbox-Draftbox] Path=/home/thufir/Maildir/draftbox Type=LibBalsaMailboxMbox Name=Draftbox thufir@dur:~$

3 5

[Dovecot] Copying mailbox from one mailserver to another?
by Bjørn T Johansen 10 Dec '12

10 Dec '12

I see there is a tool called dsync that can do this but what are the cons of using dsync compared to just package the mailbox using tar and then untar the mailbox on the new server? Regards, BTJ -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

[Dovecot] Performance problems while running doveadm purge
by Jost Krieger 08 Dec '12

08 Dec '12

I have a rather large and active mdbox (28 GB, 3M mess, 1200 deliveries/day). I usually have no problems working with those mails, and there is some batch processing going on (via doveadm). Every few weeks I try my luck running doveadm purge, and this a) crunches about 5GB (to be expected), b) takes rather long (ok), c) leads to long stretches of blocked mdbox, which is the problem. I always turn off the batch processing, but deliveries take so long that they sometimes give up after timeout (they will come back later), and the IMAP clients get blocked for long minutes. Sometimes even the purge run aborts because of 3-minute-timeouts. What could be going on here (2.1.10)? Jost -- | Jost.Krieger+sig(a)ruhr-uni-bochum.de Please help stamp out spam! | | Postmaster, JAPH, resident answer machine at RUB Comp. Center | | Sincere words are not sweet, sweet words are not sincere. | | Lao Tse, Tao Te King 81 |

3 2

[Dovecot] Dovecot director doveadm with switch "-A" error
by Ramon Frontera 08 Dec '12

08 Dec '12

Hi, we have a problem with our director proxy configuration. When we run on proxy server the doveadm command with -A switch, fails with the error: # doveadm -D quota get -A doveadm(user1): Debug: auth input: user=user1 proxy starttls=any-cert doveadm(user1): Error: Proxy is missing destination host doveadm: Error: Failed to iterate through some users If we execute the command with a single user, director assigns host and goes well, Example: # doveadm -D quota get -u user1 doveadm(user1): Debug: auth input: user=user1 proxy starttls=any-cert host=xx.xx.xx.xx proxy_refresh=450 Quota name Type Value Limit % User quota STORAGE 159401 2621440 6 User quota MESSAGE 341 - 0 We have tried different configurations and all goes wrong with this "-A" switch, Timo please, could you tell us if we have a missconfiguration or its a possible director bug ?? We really want execute the expire plugin on ours directors and them redirect to the backends servers of every user. thanks in advance. Our doveconf -n: # dovecot -n # 2.1.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.14.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_cache_size = 3 k auth_cache_ttl = 15 mins auth_debug = yes auth_verbose = yes base_dir = /var/run/dovecot/ default_client_limit = 30000 default_process_limit = 5000 dict { expire = mysql:/etc/dovecot/dovecot-dict-expire.conf.ext } director_doveadm_port = 990 director_mail_servers = mailserver1 mailserver2 director_servers = proxy1 doveadm_proxy_port = 24245 lmtp_proxy = yes mail_debug = yes mail_plugins = expire quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap-users.conf.ext driver = ldap } plugin { expire = Trash expire2 = Trash/* expire_dict = proxy::expire } postmaster_address = postmaster<at>company protocols = imap pop3 lmtp sieve service auth { client_limit = 27048 unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = dovecot mode = 0660 } } service director { fifo_listener login/proxy-notify { mode = 0600 user = $default_login_user } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0660 } unix_listener login/director { mode = 0666 } } service doveadm { executable = doveadm-server director inet_listener doveadm-server { port = 24245 } } service imap-login { executable = imap-login director inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service ipc { unix_listener ipc { user = dovecot } } service lmtp { client_limit = 1 inet_listener lmtp { port = 30025 } } service managesieve-login { executable = managesieve-login director } service pop3-login { executable = pop3-login director inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } ssl = required ssl_cert = </etc/pki/tls/certs/imap.crt ssl_key = </etc/pki/tls/private/imap.uib.es_privatekey.pem syslog_facility = local1 userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap-users.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { auth_socket_path = director-userdb mail_plugins = expire quota sieve quota passdb { args = /etc/dovecot/dovecot-ldap-pass.conf.lmtp driver = ldap } } protocol doveadm { auth_socket_path = director-userdb } protocol imap { mail_max_userip_connections = 20 mail_plugins = expire quota } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } local ip/24/24 { doveadm_password = supersecretpassword } -- ------------------------------------------ Ramon Frontera Gallardo Universitat de les Illes Balears

2 9

[Dovecot] Dovecot G+ community
by Patrick Ben Koetter 08 Dec '12

08 Dec '12

For those who own a G+ account and don't mind seeing colors in a browser once in a while instead of staring at a black/white terminal all day long, join the Dovecot G+ community <https://plus.google.com/communities/112967413753095884716> p@rick -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Joerg Heidrich

1 0

Re: [Dovecot] imap-login - where does the user get filled in from?
by Ben Morrow 07 Dec '12

07 Dec '12

At 3PM -0800 on 6/12/12 Jeff Lacki wrote: > Ben Morrow <ben(a)morrow.me.uk> wrote: > > > > imap-login: Disconnected (no auth attempts in 60 secs): user=<>, > > > rip=192.168.1.1, lip=192.168.1.22, TLS handshaking: Disconnected > > > > Just to be sure: you have replaced the self-signed certificate Dovecot > > installs with one which is signed by a public CA? > > I created my own self-signed certificate with mkcert.sh that comes with > dovecot. Changed my hostname to mail.myhostname.com and the other > stuff, installed etc. An iPhone won't accept a self-signed certificate unless you install it in the system trusted certificate list. I don't know how you do that, or even if it's possible... Ben

3 3

[Dovecot] Cannot STORE \Seen flag on some mails
by Frerich Raabe 07 Dec '12

07 Dec '12

Hi, I'm running Dovecot 1.2.17 on FreeBSD (exact output of 'dovecot -n' is atttached to this mail). The machine is serving a public mailinglist archive which is read-only; all mail arriving for the archive is marked as \Seen using Sieve script. This setup works well most of the time, but I noticed that for *some* mails, the \Seen flag doesn't seem to be stored. Right now I have 31255 mails in one of my folders and I can't seem to mark five of them as \Seen - the others work just fine. I first suspected a client issue so I did a little IMAP session by hand: * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. . LOGIN "xxxxxx" "yyyyyy" . OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS ACL RIGHTS=texk] Logged in . SELECT "Lists/Archive/squish" * FLAGS (\Answered \Flagged \Deleted \Seen \Draft $NotJunk) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 31250 EXISTS * 0 RECENT * OK [UNSEEN 27126] First unseen. * OK [UIDVALIDITY 1350573750] UIDs valid * OK [UIDNEXT 31265] Predicted next UID * OK [HIGHESTMODSEQ 9512] Highest . OK [READ-ONLY] Select completed. . SEARCH UNSEEN * SEARCH 27126 27127 28484 29835 29838 . OK Search completed (0.000 secs). . STORE 27126 FLAGS \SEEN . OK Store completed. . SEARCH UNSEEN * SEARCH 27126 27127 28484 29835 29838 . OK Search completed (0.000 secs). . LOGOUT * BYE Logging out . OK Logout completed. Note how the first 'SEARCH UNSEEN' command shows that '27126' is unseen, the subsequent 'STORE' command succeeds - but then 'SEARCH UNSEEN' still shows 27126 as unseen! I have all four logging levels being piped to /var/log/maillog (I verified this by running dovecot --log-error) but the file does not show any problems. I checked the file permissions of the Maildir directories, and it all looks dandy to me. Does anybody have some suggestions how to debug this further, or what the reason for this may be? -- Frerich Raabe - raabe(a)froglogic.com www.froglogic.com - Multi-Platform GUI Testing

2 4