- dovecot - dovecot.org

[Dovecot] error message. Some help please
by Spyros Tsiolis 08 Aug '12

08 Aug '12

Hello all : dovecot -n : # 1.2.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.4.el5 i686 CentOS release 5.5 (Final) ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-info.log ssl_parameters_regenerate: 48 verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_greeting: * Dovecot ready * login_max_processes_count: 64 mail_location: maildir:/var/MailRoot/domains/%d/%n/Maildir mail_plugins: zlib auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/passwd passdb: driver: pam userdb: driver: static args: uid=vmail gid=vmail home=/home/vmail/%u userdb: driver: passwd From the logs : tail -100 /var/log/dovecot/dovecot | more : ......... Jul 06 13:51:20 dovecot: Warning: All login processes are in use. You may need to increase login_max_processes_count Jul 18 15:20:32 dovecot: Warning: All login processes are in use. You may need to increase login_max_processes_count Jul 19 09:16:40 dovecot: Warning: Killed with signal 15 (by pid=3062 uid=0 code=kill) ......... Should I just go ahead and increase login_max_processes_count ? Is it that simple ? Just asking for your feedback and experience chaps. Thank you in advance, Spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

2 1

Re: [Dovecot] connectionlimit for pop3s?
by Joseph Tam 08 Aug '12

08 Aug '12

On Tue, 7 Aug 2012, dovecot-request(a)dovecot.org wrote: > When switching to port 995 to use pop3s he is limited at connection > count. Some people can reach pop3s-server successful, some getting a > timeout. > ... > Somebody knows some typical clientside problems when this problem > occurs? Do the same user(s) have this problem and/or do each user have their own mail configuration for their mail readers? If yes, I would also check that the port and security protocol matches (i.e. clear/TLS/SSL on ports 110/110/995 respectively). Mismatched configurations could cause what you describe. Log messages could also be helpful here. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] how to duplicate users emails to allow deleted recovery?
by Voytek Eymont 08 Aug '12

08 Aug '12

I have a situation where a user deleted emails using iphone, then, wants he sees messages are gone from desktop client, wants them recovered from server, happened several times now is there a way to have all deletes to go to server trash for potential recovery ? off topic: is there a way on iphone to force deletions to server's trash is there a way to have dovecot duplicate all emails to say user_backup(a)dom.tld mail box ? or should I duplicate emails in postfix ? using dovecot 2 with lmpt and virtual domains thanks -- Voytek

1 0

Re: [Dovecot] redirect actions exceeds policy limit
by Mike Greene 07 Aug '12

07 Aug '12

Thank you David, I saw that in the share/docs but we didn't have the /conf.d/ folder or any of the extra conf files in place. I created that directory, copied the file over, made my changes and all is well again. Not sure why things were setup the way they were, after looking at the other files in conf.d it would appear the previous sysadmin had merged a lot of those bits and pieces into the main dovecot.conf file. Perhaps leftovers from v1.x days. Will likely address that down the road when we update that server. Mike Greene Rock Island Technology Solutions, Inc. San Juan Islands, WA. 360-378-5884 x201 > -----Original Message----- > > Date: Mon, 06 Aug 2012 14:46:22 -0400 > From: David Webmailbeta Warden <warden(a)geneseo.edu> > To: <dovecot(a)dovecot.org> > Subject: Re: [Dovecot] redirect actions exceeds policy limit > Message-ID: <f3f600e6dc1974de9bb54da5c4fed10a(a)geneseo.edu> > Content-Type: text/plain; charset="utf-8" > > > > In conf.d/90-sieve.conf we have: > > # The maximum number of redirect > actions that can be performed during > # a single script execution. > > #sieve_max_redirects = 4 > sieve_max_redirects = 25 > > I think that's the > setting you're looking for. > > -David Warden

1 0

[Dovecot] sieve vacation messages trouble
by asier.cidon＠externo.uam.es 07 Aug '12

07 Aug '12

FROM:mailman-bounces@dovecot.org DATE:27. heinäkuuta 2012 16.58.35 UTC+3.00 TO:dovecot-owner@dovecot.org SUBJECT:CONTENT FILTERED MESSAGE NOTIFICATION The attached message matched the dovecot mailing list's content filtering rules and was prevented from being forwarded on to the list membership. You are receiving the only remaining copy of the discarded message. FROM:Asier Cidon Periañez <asier.cidon(a)externo.uam.es> DATE:27. heinäkuuta 2012 16.01.59 UTC+3.00 TO:dovecot@dovecot.org SUBJECT:RE: [DOVECOT] SIEVE VACATION MESSAGES TROUBLE Hi, I have a problem when I define a Filter SIEVE vacation with Horde, Qmail and Dovecot. When I sent the message vacation for domains external, the log of postfix show <"<>"@mymachine>. I am writing you because I saw the post http://www.dovecot.org/list/dovecot/2009-June/040811.html Can you explain me whqt is the solution? Many Thanks.

3 2

[Dovecot] Pigeonhole sieve include namespace regression
by Daniel Piddock 07 Aug '12

07 Aug '12

Hi, We've recently upgraded from Dovecot 1.2.15 with Sieve 0.1.18 (Debian Squeeze) to Dovecot 2.1.8 and Pigeonhole 0.3.1. We provide a selection of global sieve scripts to make users' lives easier and one noticed that some of these have stopped working. I tracked it down to them having personal scripts with the same name. Using a really simple sieve script: require "include"; include :personal "svn"; include :global "svn"; sievec debug output for sieve 0.1.18 (trimmed a bit): * Required extensions: 0: include (16) 1: fileinto (5) * Included personal script 'svn' (block: 3): [script code here] * Included global script 'svn' (block: 4): [script code here] * Main program (block: 1): 00000000: EXTENSIONS [1]: 00000001: include 00000002: INCLUDE: 00000004: script: svn.sieve [ID: 1, BLOCK: 3] 00000006: INCLUDE: 00000008: script: svn.sieve [ID: 2, BLOCK: 4] 0000000a: [End of code] sievec debug output for Pigeonhole 0.3.1: * Required extensions (block: 1): 0: include (id: 16; block: 4) 1: fileinto (id: 5) * Included personal script 'svn' (block: 5): [script code here] * Main program (block: 2): Address Line Code 00000000: DEBUG BLOCK: 3 00000001: EXTENSIONS [1]: 00000002: include 00000003: 2: INCLUDE: 00000005: script: `svn' from /home/notroot/sieve/svn.sieve [ID: 1, BLOCK: 5] 00000007: 3: INCLUDE: 00000009: script: `svn' from /home/notroot/sieve/svn.sieve [ID: 1, BLOCK: 5] 0000000b: 3: [End of code] As can be seen the personal script is included twice. Obvious work around is to rename the personal script. However it'd be nice if namespacing came back. Cheers, Dan -- Daniel Piddock, Systems Administrator, CoreFiling Limited http://www.corefiling.com

2 2

[Dovecot] connectionlimit for pop3s?
by Hajo Locke 07 Aug '12

07 Aug '12

Hello, i have a user who is able to do pop3 on port 110 without problems and without limits. There are ~10 real users using same public IP. When switching to port 995 to use pop3s he is limited at connection count. Some people can reach pop3s-server successful, some getting a timeout. I cant find any errors or limits within my config or in my log, there are no differences between using plain text and using tls. Are there some special loglines to grep for at this situation? Maybe i missed some lines... At the moment i dont see server-side problems. Somebody knows some typical clientside problems when this problem occurs? dovecot version is 1.2.11 Thanks, Hajo

2 1

[Dovecot] LDAP auth with AD
by Chris Visser 07 Aug '12

07 Aug '12

Hi, I'm struggling to setup LDAP authentication with dovecot against an AD server. When I attempt to bind using the same DN I use to do address lookups in exim and to do searches using ldap search on the command line I get the following in my logs: Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: auth client connected (pid=1523) Aug 7 08:55:58 mail-dev dovecot: auth: Error: LDAP: binding failed (dn CN=Linux Sync,CN=Users,DC=RTT,DC=co,DC=za): Invalid credentials, 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1 I'm running CentOS 6 and connect to a Windows 2008 R2 domain. The output from dovecot -n: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.2.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_debug = yes auth_verbose = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl passdb { driver = pam } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } userdb { args = uid=exim gid=exim home=/var/spool/mail/%Ld/%Ln driver = static } And my /etc/dovecot/dovecot-ldap.conf.ext: hosts = dc01.mydomain.com base = dc=mydomain,dc=com dn = CN=Linux Sync,CN=Users,DC=mydomain,DC=com dnpass = mypass deref = never scope = subtree ldap_version = 3 auth_bind = no pass_filter = (&(objectClass=person)(mail=%u)) Chris Visser Linux/Network Infrastructure ================== Please read our Email Disclaimer : http://www.rtt.co.za/disclaimer.html

1 0

[Dovecot] redirect actions exceeds policy limit
by Mike Greene 06 Aug '12

06 Aug '12

Hello, We have a vacation/mail forwarder plugin in squirrel mail that allows customers to forward email. It has come to my attention that there is a limit (appears to be 5) on the number of addresses that can be specified. I'm now trying to track down where this policy limit is set. This is the error we see in the customers .dovecot.sieve.log file: main_script: line 26: error: number of redirect actions exceeds policy limit. sieve: info: started log at Jul 25 07:02:54. I checked the following for possible settings: /usr/local/etc/dovecot/dovecot.conf /usr/local/etc/sieve/dovecot.sieve /usr/local/etc/sieve/global.sieve I didn't see anything specific to limiting the number of redirects. I'm wondering where else I can look to find where this limit is coming from and adjust it upwards. We are using the following dovecot / pigeonhole versions. dovecot-2.0.7 dovecot-pigeonhole-0.2.1 athena# dovecot -n # 2.0.7: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.1-RELEASE amd64 auth_default_realm = rockisland.com auth_mechanisms = plain login cram-md5 auth_username_format = %Lu disable_plaintext_auth = no dotlock_use_excl = yes first_valid_gid = 1000 first_valid_uid = 1000 listen = * mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { quota = maildir quota_rule = *:storage=2G quota_warning = storage=90%% /usr/local/sbin/quota-warning.sh 90 quota_warning2 = storage=80%% /usr/local/sbin/quota-warning.sh 80 sieve = ~/.dovecot.sieve sieve_dir = ~/ sieve_global_dir = /usr/local/etc/sieve/ } protocols = imap pop3 service auth { unix_listener auth-client { mode = 0660 } unix_listener auth-master { group = vmail mode = 0600 user = vmail } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = root } service imap-login { service_count = 0 } service pop3-login { service_count = 0 } ssl_cert = </usr/local/etc/ssl/star.rockisland.com.crt.pem ssl_key = </usr/local/etc/ssl/star.rockisland.com.key.pem userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf driver = ldap } verbose_proctitle = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = lda_mailbox_autocreate = no lda_mailbox_autosubscribe = yes log_path = mail_plugins = quota sieve postmaster_address = postmaster(a)rockisland.com sendmail_path = /usr/sbin/sendmail } Mike Greene Rock Island Technology Solutions, Inc. San Juan Islands, WA. 360-378-5884 x201

2 1

[Dovecot] find virtual users
by Rafael Nathan 06 Aug '12

06 Aug '12

Hi, Can sendmail find virtual users in /etc/dovecot/passwd ? If yes, what are the necesary changes I have to make ? Urgent help needed. Thanks in advance. Regards, Rafael

3 2