- dovecot - dovecot.org

[Dovecot] Some Dovecot LDA version sends MDN rather than DSN for overquota.
by Mark Sapiro 12 Feb '12

12 Feb '12

It appears that there is some version of the Dovecot LDA that is sending an RFC 3798 MDN rather than an RFC 3464 DSN to report non-delivery to a user who is over quota. See <https://bugs.launchpad.net/mailman/+bug/693134> for a discussion of this and <https://bugs.launchpad.net/mailman/+bug/693134/+attachment/1773018/+files/A…> for the actual MDN message. The issue is that apparently a user was over quota and Dovecot returned an MDN with a disposition of deleted. This is intended to mean the the mail was delivered to the user but the user deleted it without reading it. If the message was actually not delivered, this should be reported to the MTA so it can return an appropriate SMTP status, or the LDA should send an RFC 3464 DSN with an action of failed. Note that I do not actually use the Dovecot LDA nor do I have any access to the system where the notice in the bug report was received, so I may have incomplete information and this may not be relevant to current versions of Dovecot, but I think it is wrong for Dovecot to report over quota non-delivery via an MDN. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 3

[Dovecot] Passdb disconnected unexpectedly when trying to do Director with LMTP
by Mark Zealey 12 Feb '12

12 Feb '12

Hi there, I'm running Dovecot 2.0.16 just set up the director with cut&paste from the wiki. It's working & running fine for pop/imap connections (as verified by doveadm director status user), however when I specify 'RCPT TO' for a (tcp) lmtp connection straight away I get: 451 4.3.0 <xxx(a)yyy.com> Temporary user lookup failure and in the logs: 2012-02-11T14:22:54+00:00 xxx dovecot: lmtp(27997): Error: passdb lookup(xxx(a)yyy.com): Disconnected unexpectedly I'm sure this is an obvious issue for someone who's come across it before. The /var/run/dovecot/director-userdb socket is on the system; exactly the same permissions as the standard auth-userdb Here are the relevant bits of my config (I'm setting lmtp to listen on a different port than normal). Backend password database is mysql if that makes any difference. lmtp_proxy = yes service lmtp { inet_listener lmtp_test { port = 2450 } } protocol lmtp { auth_socket_path = director-userdb } Thanks, Mark

3 3

[Dovecot] Lost in configuration
by forumer＠smartmobili.com 12 Feb '12

12 Feb '12

Hi, I am trying to configure dovecot/postfix with virtual users and sasl auth but there are so many tutorials with mistakes and subtle differences that at the end I am lost. So I am running Ubuntu server 11.04 (natty) and when I installed my server I had followed the following guide http://workaround.org/ispmail/etch Then I have migrated to dovecot 2.1 and now I am trying to allow authenticated user to use my smtp server because for the moment I get : Relay access denied Here is my configuration (first is file hierarchy followed by file contents) and I would like to know what I need to do to allow authenticated user send email. In this tutorial http://library.linode.com/email/postfix/dovecot-mysql-ubuntu-10.04-lucid#sp… it seems I have to add some configuration lines inside /etc/pam.d/smtp and add database configuration inside /etc/postfix/sasl/smtpd.conf. But what I find weird is the fact I have to configure some sql queries from smtpd.conf while normally dovecot has already all the information to do this kind of query. So before to keep on modifying my config I would like to be sure I am following the right way. Thanks ########################### /etc/postfix ########################### drwxr-xr-x 3 root root 4096 2012-02-12 13:33 ./ drwxr-xr-x 116 root root 4096 2012-02-12 13:21 ../ -rw-r--r-- 1 root root 373 2011-07-24 11:50 dynamicmaps.cf -rw-r--r-- 1 root root 1928 2012-02-12 12:45 main.cf -rw-r--r-- 1 root root 5762 2011-08-03 22:06 master.cf -rw-rw---- 1 root postfix 140 2011-07-24 11:43 mysql-virtual-alias-maps.cf -rw-rw---- 1 root postfix 132 2011-07-24 11:47 mysql-virtual-mailbox-domains.cf -rw-rw---- 1 root postfix 128 2011-07-24 11:47 mysql-virtual-mailbox-maps.cf -rw-r--r-- 1 root root 19509 2011-04-05 06:07 postfix-files -rwxr-xr-x 1 root root 8729 2011-04-05 06:07 postfix-script* -rwxr-xr-x 1 root root 25752 2011-04-05 06:07 post-install* drwxr-xr-x 2 root root 4096 2012-02-12 12:41 sasl/ root@xa-12345:/etc/postfix# ll sasl/ drwxr-xr-x 2 root root 4096 2012-02-12 12:41 ./ drwxr-xr-x 3 root root 4096 2012-02-12 13:33 ../ -rw-r--r-- 1 root root 26 2012-02-12 12:41 smtpd.conf ########################### /etc/dovecot ########################### drwxr-xr-x 3 root root 4096 2011-09-24 11:42 ./ drwxr-xr-x 116 root root 4096 2012-02-12 13:21 ../ drwxr-xr-x 2 root dovecot 4096 2012-02-12 12:03 conf.d/ -rw-r--r-- 1 root dovecot 3693 2011-09-23 15:11 dovecot.conf -rw-r--r-- 1 root dovecot 410 2011-09-23 15:11 dovecot-db.conf.ext -rw-r--r-- 1 root dovecot 782 2011-09-23 15:11 dovecot-dict-sql.conf.ext -rw-r--r-- 1 root dovecot 5508 2011-09-23 15:38 dovecot-sql.conf -rw-r--r-- 1 root dovecot 5348 2011-09-23 15:11 dovecot-sql.conf.ext -rw-r--r-- 1 root dovecot 116 2011-09-23 15:11 README ########################### /etc/default/saslauthd ########################### -rw-r--r-- 1 root root 2043 2012-02-12 11:57 /etc/default/saslauthd ########################### /var/spool/postfix/var/run/ ########################### drwxr-xr-x 3 root root 4096 2012-02-12 12:35 ./ drwxr-xr-x 3 root root 4096 2012-02-12 12:35 ../ drwxr-xr-x 2 root sasl 4096 2012-02-12 12:35 saslauthd/ I have added postfix to the sasl group (don't know if it was necessary but I found this instruction on a website) /etc/group: sasl:x:45:postfix /etc/default/saslauthd: ---------------------- START=yes PWDIR="/var/spool/postfix/var/run/saslauthd" PARAMS="-m ${PWDIR}" PIDFILE="${PWDIR}/saslauthd.pid" DESC="SASL Authentication Daemon" NAME="saslauthd" MECHANISMS="pam" MECH_OPTIONS="" THREADS=5 OPTIONS="-c -m /var/spool/postfix/var/run/saslauthd" mkdir -p /var/spool/postfix/var/run/saslauthd chown -R root.sasl /var/spool/postfix/var/run/saslauthd Then I have checked saslauth is running after restart: root@xa-12345:/home/vmail# ps -ef | grep saslauthd root 6123 1 0 13:21 ? 00:00:00 /usr/sbin/saslauthd -a pam -c -m /var/run/saslauthd -n 5 root 6124 6123 0 13:21 ? 00:00:00 /usr/sbin/saslauthd -a pam -c -m /var/run/saslauthd -n 5 root 6125 6123 0 13:21 ? 00:00:00 /usr/sbin/saslauthd -a pam -c -m /var/run/saslauthd -n 5 root 6127 6123 0 13:21 ? 00:00:00 /usr/sbin/saslauthd -a pam -c -m /var/run/saslauthd -n 5 root 6128 6123 0 13:21 ? 00:00:00 /usr/sbin/saslauthd -a pam -c -m /var/run/saslauthd -n 5 Then when I check after restarting if saslauthd socket is created I don't see anything (don't know if it's normal) root@xa-12345:/home/vmail# ls -lh /var/spool/postfix/var/run/saslauthd total 0 /etc/postfix/sasl/smtpd.conf: ----------------------------- pwcheck_method: saslauthd /etc/postfix/main.cf: --------------------- myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache myhostname = mail.foobar.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = foobar.com mydestination = xa-12345.dadibox.com, localhost.dadibox.com, localhost relayhost = mynetworks = 127.0.0.0/8 80.190.190.190 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #virtual domains virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_base = /home/vmail virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf # Dovecot LDA virtual_transport = dovecot dovecot_destination_recipient_limit = 1 debug_peer_level = 2 debug_peer_list = 127.0.0.1 smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,reject_unauth_destination smtpd_sasl_application_name = smtpd broken_sasl_auth_clients = yes /etc/dovecot/conf.d/10-auth.conf: -------------------------------------- disable_plaintext_auth = no !include auth-sql.conf.ext !include auth-static.conf.ext /etc/dovecot/conf.d/auth-static.conf.ext: ---------------------------------------- userdb { driver = static args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes } /etc/dovecot/conf.d/auth-sql.conf.ext: -------------------------------------- passdb { driver = sql args = /etc/dovecot/dovecot-sql.conf } /etc/dovecot/dovecot-sql.conf: ------------------------------ driver = mysql connect = host=127.0.0.1 dbname=mailserver user=myuser password=mypassword default_pass_scheme = CRAM-MD5 password_query = SELECT email as user, password FROM view_users WHERE email='%u'; /etc/dovecot/conf.d/10-master.conf: ---------------------------------- service imap-login { inet_listener imap { } inet_listener imaps { } } service pop3-login { inet_listener pop3 { } inet_listener pop3s { } } service lmtp { unix_listener lmtp { } } service imap { } service pop3 { } service auth { unix_listener auth-userdb { mode = 0600 user = vmail #group = } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0777 } } service auth-worker { } service dict { unix_listener dict { mode = 0600 #user = group = vmail } }

2 2

[Dovecot] Quota Calculation seems to be wrong when using dsync
by Thomas Leuxner 12 Feb '12

12 Feb '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Recently I encountered odd quota increases when using 'dsync' with the latest and greatest: 2.0.8 (89936539e3b8). Say you got something in place like this: plugin { quota = dict:user::file:%h/mdbox/dovecot-quota quota_rule = *:storage=1GB quota_rule2 = Trash:storage=+10%% } Kick off a manual backup: $ dsync -u user(a)domain.tld backup mdbox:/<path to backup>/mdbox This results in doubling the quota for the backed up user. It doesn't seem to matter whether 'mirror' or 'backup' mode is used, both increase the "source" quota. Doesn't sound right to me. You can only get to the "real" usage by running a recalc manually: $ doveadm quota recalc -u user(a)domain.tld Anyone else seen this? Regards Thomas P.S. Merry Christmas -----BEGIN PGP SIGNATURE----- Version: GnuPG/MacGPG2 v2.0.16 (Darwin) iEYEARECAAYFAk0VtH8ACgkQ+meF/S97aXjUkwCfdZFpUPCOY9UiukT+G68jCHHr mmMAnRHz56BXMzpC84CIYvUn4KHpl8OA =M0AZ -----END PGP SIGNATURE-----

2 9

[Dovecot] Migration to mdbox from Maildir, missing folders!
by Giles Coochey 12 Feb '12

12 Feb '12

So I went and migrated a mailbox from mdbox from maildir format. All seemed ok, but I've found that I now have some missing folders. The mailbox in maildir format had some folders which contained an '&' sign, these appear to have been omitted... What can be done? (I have a backup of the maildir box). Note though that mdbox is now a live mailbox and has sent and received mails since the migration... -- Message sent via my webmail account.

2 1

[Dovecot] folder hierarchies with migration from cyrus to dovecot2
by Wolfgang Rosenauer 12 Feb '12

12 Feb '12

Hi, I finally migrated my IMAP server from cyrus to dovecot2. I have been using cyrus since many years and have not much experience with dovecot yet though. I've converted my imap server using cyrus2dovecot (several times until I thought it was correct) but there is one thing left which confuses me and I'm not sure what I can or need to do to change it. With Cyrus I used unixhierarchysep: yes and subfolders within Cyrus are always below INBOX. I'm used to that in my IMAP clients and wanted to preserve it with Dovecot. So during migration I finally made sure to create the subfolder again below INBOX wich looks fine in Thunderbird for example. But my mobile devices (Android based with K9) were displaying the folders with Cyrus just with their name w/o the INBOX prefix. (Mobile clients are bad in displaying folder hierarchies so it was convenient to have them looking like they were in parallel to the Inbox.) Now I get the folders displayed as INBOX.whatever and my Android mail clients fail to map them to the special (and localized) folders like Trash. While that seems consistent to my current hierarchy it's not what I wanted. So basically my two questions are: - Can I configure Dovecot in a way that it looks like Cyrus? Having subfolders below Inbox but let clients like those on Android display them besides Inbox? - If that's not possible, can I move the subfolders up one level so they are next to the Inbox? How would I do that? Sorry for the beginner questions. I played around with Dovecot before but using it in production environment disclosed some fine differences. Thanks, Wolfgang

2 1

[Dovecot] [PATCH] Allow verification of user's hash in doveadm-pw
by Spack 12 Feb '12

12 Feb '12

Hi, It may be useful for testing purpose to know if a generated password hash correspond to a given clear password. This can be useful to check if a hash generated by another program can be verified by Dovecot without any errors. This patch adds the ability the verify a password hash using `doveadm pw` via the `-V` option. $ doveadm pw -s SSHA.hex Enter new password: Retype new password: {SSHA.HEX}58b910d947c60b35be3e12b0d9897c1f87dfa450e6d5a75c $ doveadm pw -s SSHA.hex -V{SSHA.HEX}58b910d947c60b35be3e12b0d9897c1f87dfa450e6d5a75c Enter new password: Retype new password: {SSHA.HEX}4fdf801f57870fb624bee60895c2308187837dfb3987ca06 (verified) When the user specify a hash, it is checked in place of the usual verification process. This works with all schemes. Just be sure to escape special characters or use simple quotes. $ doveadm pw -s MD5-CRYPT -V'{MD5-CRYPT}$1$R7thDyN.$E0G0czPE/h4S0Hn/b5oVW1' Enter new password: Retype new password: {MD5-CRYPT}$1$rp8nVSqq$gDAPM5iqv1yhBoDZIWsQ4/ (verified) Lets print a failed check: doveadm pw -s CRYPT -V{CRYPT}/uuE/AAAAAAAA Enter new password: Retype new password: reverse password verification check failed FYI the word used for those test cases was "password". Regards, ___ Jimmy Thrasibule <spack.world(a)gmail.com>

2 1

[Dovecot] Can't view all sub folders or e-mail using Dovecot with Maildir.
by Glen Johnson 11 Feb '12

11 Feb '12

I have an IMAP mail server running Postfix, and Dovecot. I have an old Notebook computer which I can view all e-mails. The problem I am having is when I try to use any other computer on the network to view the e-mail I can not see the contents of all the folders. I can see some of the folders and their content but not all. To answer a couple of preliminary questions: dovecot version 2.0.13, postfix version 2.8.3 dovecot.conf ------------------ # 2.0.13: /usr/pkg/etc/dovecot/dovecot.conf # OS: NetBSD 4.0.1 i386 auth_debug = yes auth_verbose = yes disable_plaintext_auth = no listen = * log_path = /var/log/dovecot.log mail_location = maildir:~/Maildir/ passdb { driver = passwd } passdb { args = /usr/pkg/etc/dovecot/passwd driver = passwd-file } protocols = imap service auth { user = root } service imap-login { executable = /usr/pkg/libexec/dovecot/imap-login } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol lda { postmaster_address = postmaster(a)denisecir.com }

2 1

[Dovecot] doveadm index
by Daniel L. Miller 10 Feb '12

10 Feb '12

Does "doveadm index -A INBOX" reindex everything? What about users with multiple folders, both subbed & not subbed under INBOX? -- Daniel

3 6

[Dovecot] Postfix + LMTP with virtual users: how to strip domain from LMTP RCPT TO
by Mildred Ki'Lya 10 Feb '12

10 Feb '12

Hi, I am trying to set up my own mail server (to get off Google) and I have a problem with mail delivery. I'm using Postfix as a SMTP front-end, and use the LMTP server included in dovecot to receive mail from postfix. I have a setup which works with the dovecot LDA, it involves calling dovecot-lda with the -d flag. Postfix computes the username by removing what's after the recipient_delimiter and the domain from the mail address, and gives this username to dovecot. But, I'd prefer using LMTP, as it is possible to reject unknown e-mails without having to duplicate the user database (it is explained here: http://wiki2.dovecot.org/LDA/Postfix ) I set up LMTP so that postfix uses the socket provided by dovecot, and it works. Only I get the following error message in the logs: Feb 10 18:05:53 ashley postfix/smtpd[9298]: NOQUEUE: reject: RCPT from mail-wi0-f179.google.com[209.85.212.179]: 450 4.1.1 <mildred(a)mildred.fr>: Recipient address rejected: unverified address: host mail.mildred.fr[private/dovecot-lmtp] said: 550 5.1.1 <mildred(a)mildred.fr> User doesn't exist: mildred(a)mildred.fr(in reply to RCPT TO command); from=< shanti(a)sogilis.com> to=<mildred(a)mildred.fr> proto=ESMTP helo=< mail-wi0-f179.google.com> Feb 10 18:06:52 ashley postfix/smtpd[9298]: NOQUEUE: reject: RCPT from mail-wi0-f179.google.com[209.85.212.179]: 450 4.1.1 <mildred-test(a)mildred.fr>: Recipient address rejected: unverified address: host mail.mildred.fr[private/dovecot-lmtp] said: 550 5.1.1 <mildred-test(a)mildred.fr> User doesn't exist: mildred-test(a)mildred.fr (in reply to RCPT TO command); from=< shanti(a)sogilis.com> to=<mildred-test(a)mildred.fr> proto=ESMTP helo=< mail-wi0-f179.google.com> I followed the explanations here: http://wiki2.dovecot.org/HowTo/PostfixDovecotLMTP The problem is that my passwd-like file only contains a user named "mildred". I tried to add a user mildred(a)mildred.fr and mildred%mildred.frbut it doesn't work either. Do you know how I could tell dovecot to guess the username correctly ? Thanks, Mildred -- Mildred Ki'Lya http://mildred.fr

2 1