- dovecot - dovecot.org

[Dovecot] Client IP log variable for proxy/director setups?
by Kelsey Cummings 01 Jun '11

01 Jun '11

Timo - it would be very convenient if we could get a variable that held the real client ip for use in logging with director/proxy setups. It's clearly already passed around in client->user->remote_ip but at this point, I don't see anyway to get it into the logs and it would take me ages to figure out the Right place to add it since client->user doesn't seem to be available in client-common.c: get_var_expand_table(..). Perhaps I'm missing something obvious? -- Kelsey Cummings - kgc(a)corp.sonic.net sonic.net, inc. System Architect 2260 Apollo Way 707.522.1000 Santa Rosa, CA 95407

1 1

[Dovecot] Help needed on dovecot 2.0.13
by गौरव जोशी 31 May '11

31 May '11

Hi, We have just installed dovecot version 2.0.13 on our server. while load testing we get below error in logs. May 30 19:57:19 [My Server]dovecot: imap-login: Error: read(imap) failed: Connection reset by peer May 30 19:57:19 [My Server] dovecot: imap-login: Internal login failure (pid=25816 id=1) (auth failed, 1 attempts): Please help as we want to use this on live environment and if these tests fails we can not move this server into live structure. Have a nice time, Gourav Joshi Have a look at www.linuxquestions.in

2 1

[Dovecot] PAM config problem...
by Juan Bernhard 30 May '11

30 May '11

Hi, I had some troubles with PAM configuration. I need to restrict imap access to some users (and allow pop3 to all). I followed the wiki example of using "args = %s" to use 2 pams configurations (one for imap and another for pop3) When I start the service, it starts, but when I try to auth its hangs Here is the log: May 26 15:16:09 claudia dovecot: master: Warning: Killed with signal 15 (by pid=15424 uid=0 code=kill) May 26 15:16:10 claudia dovecot: master: Dovecot v2.0.13 starting up May 26 15:16:24 claudia dovecot: auth: Debug: Loading modules from directory: /usr/local/lib/dovecot/auth May 26 15:16:24 claudia dovecot: auth: Fatal: pam: Unknown setting: %s May 26 15:16:24 claudia dovecot: master: Error: service(auth): command startup failed, throttling May 26 15:16:59 claudia dovecot: pop3-login: Error: Timeout waiting for handshake from auth server. my pid=15435, input bytes=0 Is this option working? Im I missing somethin? I had the same proble in Solaris (but i thought that was a solaris thing, solaris is ALWAYS diferent) here is my doveconf -n # 2.0.13: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-238.9.1.el5 x86_64 CentOS release 5.6 (Final) ext3 auth_cache_size = 10 M auth_debug = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no listen = * login_greeting = Server ready. mail_debug = yes mail_location = maildir:/var/mail/%u:INDEX=~/ mail_plugins = quota passdb { args = %s failure_show_msg=yes driver = pam } plugin { quota = maildir:Cuota de correo quota_rule = *:storage=1G quota_rule2 = Trash:storage=+100M } protocols = imap pop3 ssl = no ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags mail_plugins = quota imap_quota } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_lock_session = yes pop3_uidl_format = %08Xv%08Xu } And the build options: Build options: ioloop=epoll notify=inotify ipv6 openssl io_block_size=8192 Mail storages: cydir maildir mbox mdbox raw sdbox shared SQL drivers: Passdb: checkpassword ldap pam passwd passwd-file shadow Userdb: checkpassword ldap nss passwd prefetch passwd-file Thanks, Juan.

2 2

[Dovecot] OT: DNS-Problem with Mailnglist-Server
by Hanns Mattes 30 May '11

30 May '11

Hi, is there a problem with the server, which is running this list, or do I have an issue with my DNS-server? mail:/ # host 193.210.130.67 Host 67.130.210.193.in-addr.arpa. not found: 3(NXDOMAIN) which leads to postfix complaining: May 30 13:28:39 mail postfix/smtpd[25014]: NOQUEUE: reject_warning: RCPT from unknown[193.210.130.67]: 450 4.7.1 Client host rejected: cannot find your reverse hostname, [193.210.130.67]; from=<dovecot-bounces(a)dovecot.org> to=<hanns(a)hannsmattes.de> proto=ESMTP helo=<dovecot.org> Regards Hanns

6 8

[Dovecot] recipient delimiters and virtual users
by Nick Edwards 30 May '11

30 May '11

Is there a known workaround for users who want to use the old recipient delimiter plus sign method of sorting their mail? eg: foo.bat +dovecot(a)example.com <foe.blow%2Bdovecot(a)example.com> This does not work with postfix/dovecot, but if we tell postfix/system-passwd to use the recipient_delimiter = + it works just like I recall sendmail did, but we no longer use local users only virtual dovecot LDA w/mysql. postfix appears to accept it testing by telnet, but then the message gets a new DSN generated saying no user, so dovecot LDA must not work by default with this. Postfix 2.8.3 Dovecot 1.2.17 MySQL 5.5.12 our postfix master.cf is dovecot unix - n n - - pipe flags=DRhu user=mail:mail argv=/usr/libexec/dovecot/deliver -e -d ${recipient}

3 5

[Dovecot] Email being stored in "cur" folder and not being downloaded in Thunderbird
by Jay Welch 27 May '11

27 May '11

Hi, I have recently noticed that a random number of emails are being stored in the "cur" folder under certain users and cannot be downloaded in Thunderbird. I have tried moving the emails from "cur" to "new" but everytime I try to download the email from Thunderbird, the emails go back to the "cur" folder. What could be causing this? What is the "cur" folder used for? I had thought that the "cur" folder was used for IMAP but all the users here are using POP. Also, I have tried testing this on Outlook and Outlook seems to download the files from "cur". Thanks

2 1

[Dovecot] Bug report: Panic: Trying to sync mailbox archive with open transactions
by Erik Hetzner 26 May '11

26 May '11

Hi, I am getting the following error trying to search a virtual folder. May 26 11:35:29 xam dovecot: imap(egh): Panic: Trying to sync mailbox archive with open transactions May 26 11:35:29 xam dovecot: imap(egh): Error: Raw backtrace: /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(+0x39ce1) [0xd2dce1] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(+0x39d4f) [0xd2dd4f] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xd0485e] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot-storage.so.0(+0x24dd6) [0xf5add6] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/lib20_virtual_plugin.so(virtual_storage_sync_init+0x80f) [0x4a1a7f] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x39) [0xf5ada9] -> dovecot/imap(imap_sync_init+0x54) [0x805df74] -> dovecot/imap(cmd_sync_delayed+0x1bc) [0x805ecdc] -> dovecot/imap(client_handle_input+0x21a) [0x805658a] -> dovecot/imap(client_input+0x5f) [0x8056daf] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x51) [0xd3b681] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xd3) [0xd3c8b3] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0xd3b600] -> /usr/local/stow/dovecot-2.0.13/lib/dovecot/libdovecot.so.0(master_service_run+0x2a) [0xd26e1a] -> dovecot/imap(main+0x32d) [0x805f99d] -> /lib/i386-linux-gnu/libc.so.6(__libc_start_main+0xe7) [0x808e37] -> dovecot/imap() [0x804e131] May 26 11:35:29 xam dovecot: master: Error: service(imap): child 18403 killed with signal 6 (core dumps disabled) As you can see, I am using fts_solr plugin. the virtual mailbox is pretty simple: INBOX * -spam -Trash -trash -drafts My client is Wanderlust. Let me know any other information I can provide. Thank you! best, Erik Hetzner Sent from my free software system <http://fsf.org/>.

1 0

[Dovecot] Dovecot imaptest on RHEL4/GFS1, RHEL6/GFS2, NFS and local storage results
by Aliet Santiesteban Sifontes 26 May '11

26 May '11

We have done some benchmarking tests using dovecot 2.0.12 to find the best shared filesystem for hosting many users, here I share with you the results, notice the bad perfomance of all the shared filesystems against the local storage. Is there any specific optimization/tunning on dovecot for use GFS2 on rhel6??, we have configured the director to make the user mailbox persistent in a node, we will thank's any help from you. we are interested in using GFS2 or NFS, we believe the problem is the locks, how can we improve this?? best regards, Aliet The results rhel 4.8 x86_64/GFS1 two nodes, shared FC lun on a SAN Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 2608 1321 1311 2608 2508 3545 547 2001 2493 2702 5282 2- 2810 1440 1430 2810 2688 3835 403 2154 2679 2925 5706 3- 2913 1457 1441 2908 2778 3913 417 2253 2773 3034 5924 4- 2814 1448 1412 2812 2695 3910 401 2186 2686 2929 5712 5- 2789 1464 1432 2787 2652 3774 427 2112 2649 2879 5676 6- 2843 1460 1444 2839 2722 3948 422 2164 2713 2957 5778 rhel6 x86_64/GFS2 two nodes, shared FC lun on a SAN(Used RDM in VMWare vSphere for GFS2 lun) Tunned cluster suite cluster.conf + <dlm plock_ownership="1" plock_rate_limit="0"/> <gfs_controld plock_rate_limit="0"/> Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 2730 1340 1356 2704 2644 3748 522 2125 2643 2662 5422 2- 3309 1618 1659 3294 3223 4658 531 2563 3221 3239 6596 3- 2131 1046 1017 2055 2025 2911 381 1608 2024 2052 4256 4- 2176 1055 1039 2082 2058 2947 377 1671 2058 2078 4344 5- 1859 928 931 1859 1800 2626 304 1454 1799 1801 3706 6- 2672 1322 1329 2672 2607 3758 464 2097 2606 2615 5326 rhel6 x86_64/GFS2 two nodes, shared FC lun on a SAN(Used RDM in VMWare vSphere for GFS2 lun) Cluster suite defaults configs for plocks Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 1417 644 676 1325 1305 1872 308 1048 1302 1318 2824 2- 837 378 392 742 726 1050 117 588 722 734 1658 3- 803 363 347 752 745 1069 153 597 744 750 1658 4- 1682 802 811 1587 1569 2261 291 1299 1569 1585 3360 5- 1146 583 564 1146 1037 1500 213 811 1037 1049 2290 6- 838 403 366 744 734 1057 152 561 731 736 1664 rhel6 x86_64 two nodes used NFS(NAS Freenas 0.8, nfsvers 3) Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 1382 699 691 1357 1063 1500 224 861 1053 1313 2694 2- 1634 785 799 1610 1459 2120 311 1192 1451 1570 3204 2- 1635 826 806 1611 1463 2088 345 1159 1459 1568 3190 3- 1574 758 781 1537 1403 2060 324 1135 1396 1504 3090 4- 1685 842 807 1653 1506 2135 349 1215 1504 1634 3344 5- 1766 850 893 1737 1582 2289 335 1288 1579 1705 3480 6- 1597 797 769 1572 1423 2007 313 1133 1420 1536 3142 rhel6 x86_64 local storage Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1- 7798 3868 3889 7706 7566 10713 1080 6089 7559 7688 15562 2- 7806 3879 3874 7716 7585 10873 1114 6018 7578 7696 15572 3- 7866 3910 3855 7773 7748 11053 1076 6253 7747 7761 15710 4- 7893 3978 3931 7802 7772 10988 1117 6197 7767 7789 15760 5- 7775 3853 3809 7683 7654 10897 1081 6142 7651 7675 15534 6- 7877 3919 3872 7789 7758 10986 1085 6218 7755 7773 15720

4 10

[Dovecot] Moving maildir mailboxes
by Willie Gillespie 26 May '11

26 May '11

I am using Maildir with Dovecot 1.2. (Config available if needed, but should be a simple question.) I have a bunch of mail that I would like to do a one-time move from a private namespace to a shared namespace. The namespaces are already set up, etc. Can I just move the folders to their new location? I am not merging with existing folders, they would be new subfolders. Thanks! - Willie

2 1

[Dovecot] 2.0.12 (fa2e92526716): Deleting mails and folders from public namespaces
by Binarus 26 May '11

26 May '11

Hello, we basically run a dovecot imap setup where users' mailboxes are in private namespaces (as usual), but there is a public namespace with several thousand deeply nested folders also. The client we use is Thunderbird 3. The public namespace shows up in each user's account at the top level (i.e. same level as Inbox, Sent and so on), and users can make new subfolders in the public namespace, copy mails to it and so on. So, our setup basically works. But whenever a user tries to delete a folder from the public namespace, dovecot gives the following error: "Renaming not supported across non-private namespaces". I think I have a grasp why this happens (Thunderbird tries to move the folder from the public namespace into the trash folder (private namespace) of the user who does the deletion), and I also have read Timo's statement that he does not plan to support such renaming due to big problems he is seeing with it. Nevertheless, since deleting a folder from a public archive is not a too uncommon thing, I wanted to ask how other people have solved that. It came to my mind to configure Thunderbird to immediately delete folders and messages (instead of moving them to trash folder). I have tested that, and it worked, but is somehow dangerous and unsatisfying. Furthermore, I haven't completely understood the reason for the different behaviour of folders in the public namespace and a single message therein. If I configure Thunderbird to use the trash folder, users can delete messages from the public namespace, i.e. Thunderbird can move messages from the public namespace to the private trash folder of the respective account. This is obviously not true for folders (even if they are empty). What's the difference between an empty folder and a single message in this respect? Is it really the ACL thing which makes folders so difficult to handle opposed to single messages? Thank you very much for any ideas! Regards, Peter ************ dovecot -n: # 2.0.12 (fa2e92526716): /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 auth_verbose = yes auth_verbose_passwords = sha1 first_valid_uid = 103 maildir_copy_with_hardlinks = no namespace { hidden = no inbox = yes list = yes location = maildir:/home/vmail/content/users/%u:INDEX=/home/vmail/index/users/%u prefix = separator = / subscriptions = yes type = private } namespace { hidden = no inbox = no list = yes location = maildir:/home/vmail/content/archive:INDEX=/home/vmail/index/archive prefix = Archive/ separator = / subscriptions = yes type = public } passdb { args = scheme=SSHA username_format=%u /etc/dovecot/users driver = passwd-file } plugin { acl = vfile } protocols = " imap" service auth { user = root } service imap-login { inet_listener imap { port = 0 } inet_listener imaps { address = 192.168.20.140 port = 993 ssl = yes } } ssl_cert = </etc/dovecot/imap-ssl.home.omeganet.de.crt ssl_key = </etc/dovecot/imap-ssl.home.omeganet.de.key userdb { args = uid=vmail gid=vmail home=/home/vmail/content/users/%u driver = static } protocol imap { mail_plugins = acl imap_acl }

3 4