- dovecot - dovecot.org

Re: [Dovecot] How to make SUBdirectories in Dovecot...
by Theatre 21 Jun '11

21 Jun '11

Robert Schetterer wrote: > > Am 31.05.2011 11:36, schrieb Theatre: >> >> Hi! >> >> I wonder how i can get subdirectories (.INBOX/***/*** etc...) in >> dovecot... >> I just stardet a mail server and when i tried to create it from the mail >> client (MS Outlook) it says that the server wont allow it... >> >> Anyone who knows a solution? >> >> > yes post your conf > > -- > Best Regards > > MfG Robert Schetterer > > Germany/Munich/Bavaria > > I tried to post it but it wont get accepted by the mailing list... Can i email the conf to you? Best Regards -- View this message in context: http://old.nabble.com/How-to-make-SUBdirectories-in-Dovecot...-tp31739301p3… Sent from the Dovecot mailing list archive at Nabble.com.

3 4

Re: [Dovecot] Performance settings for 500-1000User/per day
by Denny Schierz 20 Jun '11

20 Jun '11

hi, Am 20.06.2011 um 17:51 schrieb Frank Bonnet: > Did you check the kernel maximum open files option ? > > I had such troubles with a too low limit I thought, it's only a Linux problem? On the other hand, if so, I would assume, that I see some log infos, but I saw nothing ... cu denny

1 0

[Dovecot] Error
by sunhux G 20 Jun '11

20 Jun '11

I tested POP3 access from my laptop's Outlook which is on the same subnet as the dovecot/postfix server (so there's no firewall in between them & was able to get the emails in Outlook with following statuses shown when "Test Connection" is clicked: > Tasks Status > ===================== ======== > Establish network connection Completed > Find outgoing mail server (SMTP) Completed > Find incoming mail server (POP3) Completed > Log onto incoming mail server (POP3) Completed > Send test e-mail message Completed # dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:24: ssl_disable has been renamed to ssl # OS: Linux 2.6.12.6-xen0 i686 Red Hat Enterprise Linux ES release 4 (Nahant Update 2) disable_plaintext_auth = no listen = * mail_location = mbox:~/mail:INBOX=/pop3/spool/mail/%u mbox_write_locks = fcntl passdb { driver = pam } protocols = pop3 imap ssl = no ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } However, maillog has the following errors (172.19.21.23 is my laptop). Are they critical or what I hv to do to fix them: Jun 20 15:06:35 SmtpostixSvr postfix/smtpd[24148]: warning: smtpd_sasl_auth_enable is true, but SASL support is not compiled in Jun 20 15:06:35 SmtpostixSvr postfix/smtpd[24148]: connect from unknown[172.19.21.23] Jun 20 15:06:35 SmtpostixSvr postfix/smtpd[24148]: EA32720006C: client=unknown[172.19.21.23] Jun 20 15:06:36 SmtpostixSvr postfix/cleanup[24151]: EA32720006C: message-id=<20110620070635.EA32720006C(a)SmtpostixSvr.myportal.com> Jun 20 15:06:36 SmtpostixSvr postfix/smtpd[24148]: disconnect from unknown[172.19.21.23] Jun 20 15:06:36 SmtpostixSvr postfix/qmgr[21020]: EA32720006C: from=<myUnixid(a)myportal.com>, size=705, nrcpt=1 (queue active) Jun 20 15:06:36 SmtpostixSvr dovecot: auth: Error: dlopen(/usr/lib/dovecot/auth/libdriver_pgsql.so) failed: /usr/lib/dovecot/auth/libdriver_pgsql.so: undefined symbol: PQescapeStringConn Jun 20 15:06:36 SmtpostixSvr dovecot: auth: Error: dlopen(/usr/lib/dovecot/auth/libdriver_pgsql.so) failed: /usr/lib/dovecot/auth/libdriver_pgsql.so: undefined symbol: PQescapeStringConn Jun 20 15:06:36 SmtpostixSvr postfix/local[24152]: EA32720006C: to=<myUnixid(a)SmtpostixSvr.myportal.com>, orig_to=<myUnixid(a)myportal.com>, relay=local, delay=0.81, delays=0.26/0.11/0/0.43, dsn=2.0.0, status=sent (delivered to command: /usr/bin/procmail) Jun 20 15:06:36 SmtpostixSvr postfix/qmgr[21020]: EA32720006C: removed Jun 20 15:06:36 SmtpostixSvr dovecot: pop3-login: Login: user=<myUnixid>, method=PLAIN, rip=172.19.21.23, lip=172.19.21.27, mpid=24157 Jun 20 15:06:36 SmtpostixSvr dovecot: pop3(myUnixid): Disconnected: Logged out top=0/0, retr=0/0, del=0/191, size=436234 ================================================ > " saslfinger -s " output: > # saslfinger -s > saslfinger - postfix Cyrus sasl configuration Thu Mar 17 18:10:18 SGT 2011 > version: 1.0.2 > mode: server-side SMTP AUTH > > -- basics -- > Postfix: 2.5.6 > System: Red Hat Enterprise Linux ES release 4 (Nahant Update 2) > > -- smtpd is linked to -- > libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x47b72000) > > -- active SMTP AUTH and TLS parameters for smtpd -- > smtpd_sasl_auth_enable = yes > smtpd_sasl_security_options = noanonymous > > > -- listing of /usr/lib/sasl -- > total 560 > -rw-r--r-- 1 root root 4634 Dec 2 2004 libanonymous.a > -rwxr-xr-x 1 root root 871 Dec 2 2004 libanonymous.la > -rwxr-xr-x 1 root root 5748 Dec 2 2004 libanonymous.so > -rwxr-xr-x 1 root root 5748 Dec 2 2004 libanonymous.so.1 > -rwxr-xr-x 1 root root 5748 Dec 2 2004 libanonymous.so.1.0.17 > -rw-r--r-- 1 root root 9758 Dec 2 2004 libcrammd5.a > -rwxr-xr-x 1 root root 857 Dec 2 2004 libcrammd5.la > -rwxr-xr-x 1 root root 9884 Dec 2 2004 libcrammd5.so > -rwxr-xr-x 1 root root 9884 Dec 2 2004 libcrammd5.so.1 > -rwxr-xr-x 1 root root 9884 Dec 2 2004 libcrammd5.so.1.0.19 > -rw-r--r-- 1 root root 34264 Dec 2 2004 libdigestmd5.a > -rwxr-xr-x 1 root root 880 Dec 2 2004 libdigestmd5.la > -rwxr-xr-x 1 root root 30804 Dec 2 2004 libdigestmd5.so > -rwxr-xr-x 1 root root 30804 Dec 2 2004 libdigestmd5.so.0 > -rwxr-xr-x 1 root root 30804 Dec 2 2004 libdigestmd5.so.0.0.20 > -rw-r--r-- 1 root root 11322 Dec 2 2004 libgssapiv2.a > -rwxr-xr-x 1 root root 906 Dec 2 2004 libgssapiv2.la > -rwxr-xr-x 1 root root 11952 Dec 2 2004 libgssapiv2.so > -rwxr-xr-x 1 root root 11952 Dec 2 2004 libgssapiv2.so.1 > -rwxr-xr-x 1 root root 11952 Dec 2 2004 libgssapiv2.so.1.0.19 > -rw-r--r-- 1 root root 6598 Dec 2 2004 liblogin.a > -rwxr-xr-x 1 root root 847 Dec 2 2004 liblogin.la > -rwxr-xr-x 1 root root 7248 Dec 2 2004 liblogin.so > -rwxr-xr-x 1 root root 7248 Dec 2 2004 liblogin.so.0 > -rwxr-xr-x 1 root root 7248 Dec 2 2004 liblogin.so.0.0.7 > -rw-r--r-- 1 root root 6150 Dec 2 2004 libplain.a > -rwxr-xr-x 1 root root 849 Dec 2 2004 libplain.la > -rwxr-xr-x 1 root root 7000 Dec 2 2004 libplain.so > -rwxr-xr-x 1 root root 7000 Dec 2 2004 libplain.so.1 > -rwxr-xr-x 1 root root 7000 Dec 2 2004 libplain.so.1.0.16 > > -- listing of /usr/lib/sasl2 -- > total 3152 > -rwxr-xr-x 1 root root 875 Dec 2 2004 libanonymous.la > -rwxr-xr-x 1 root root 12820 Dec 2 2004 libanonymous.so > -rwxr-xr-x 1 root root 12820 Dec 2 2004 libanonymous.so.2 > -rwxr-xr-x 1 root root 12820 Dec 2 2004 libanonymous.so.2.0.19 > -rwxr-xr-x 1 root root 863 Dec 2 2004 libcrammd5.la > -rwxr-xr-x 1 root root 15216 Dec 2 2004 libcrammd5.so > -rwxr-xr-x 1 root root 15216 Dec 2 2004 libcrammd5.so.2 > -rwxr-xr-x 1 root root 15216 Dec 2 2004 libcrammd5.so.2.0.19 > -rwxr-xr-x 1 root root 884 Dec 2 2004 libdigestmd5.la > -rwxr-xr-x 1 root root 42964 Dec 2 2004 libdigestmd5.so > -rwxr-xr-x 1 root root 42964 Dec 2 2004 libdigestmd5.so.2 > -rwxr-xr-x 1 root root 42964 Dec 2 2004 libdigestmd5.so.2.0.19 > -rwxr-xr-x 1 root root 911 Dec 2 2004 libgssapiv2.la > -rwxr-xr-x 1 root root 22292 Dec 2 2004 libgssapiv2.so > -rwxr-xr-x 1 root root 22292 Dec 2 2004 libgssapiv2.so.2 > -rwxr-xr-x 1 root root 22292 Dec 2 2004 libgssapiv2.so.2.0.19 > -rwxr-xr-x 1 root root 851 Dec 2 2004 liblogin.la > -rwxr-xr-x 1 root root 13296 Dec 2 2004 liblogin.so > -rwxr-xr-x 1 root root 13296 Dec 2 2004 liblogin.so.2 > -rwxr-xr-x 1 root root 13296 Dec 2 2004 liblogin.so.2.0.19 > -rwxr-xr-x 1 root root 854 Dec 2 2004 libntlm.la > -rwxr-xr-x 1 root root 29104 Dec 2 2004 libntlm.so > -rwxr-xr-x 1 root root 29104 Dec 2 2004 libntlm.so.2 > -rwxr-xr-x 1 root root 29104 Dec 2 2004 libntlm.so.2.0.19 > -rwxr-xr-x 1 root root 851 Dec 2 2004 libplain.la > -rwxr-xr-x 1 root root 13360 Dec 2 2004 libplain.so > -rwxr-xr-x 1 root root 13360 Dec 2 2004 libplain.so.2 > -rwxr-xr-x 1 root root 13360 Dec 2 2004 libplain.so.2.0.19 > -rwxr-xr-x 1 root root 931 Dec 2 2004 libsasldb.la > -rwxr-xr-x 1 root root 784960 Dec 2 2004 libsasldb.so > -rwxr-xr-x 1 root root 784960 Dec 2 2004 libsasldb.so.2 > -rwxr-xr-x 1 root root 784960 Dec 2 2004 libsasldb.so.2.0.19 > -rwxr-xr-x 1 root root 875 Dec 2 2004 libsql.la > -rwxr-xr-x 1 root root 21348 Dec 2 2004 libsql.so > -rwxr-xr-x 1 root root 21348 Dec 2 2004 libsql.so.2 > -rwxr-xr-x 1 root root 21348 Dec 2 2004 libsql.so.2.0.19 >

2 1

[Dovecot] dovecot-metadata-8 released
by Dennis Schridde 20 Jun '11

20 Jun '11

Hello everyone! I just released dovecot-metadata-8, which is an implementation of RFC 5464 (IMAP METADATA), allowing to add comments/annotations/metadata to folders of an email account. The major feature is that it works with Akonadi, or more specifically the Kolab backend thereof, while being dovecot-2.0 compatible. The module consists of 3 plugins, two IMAP frontends and one backend: * "imap-annotatemore" is a partial implementation of draft-daboo-imap- annotatemore-08 (early predecessor to RFC 5464), based on work by Bernhard Herzog (Intevation GmbH). The sole intention is to support Kolab, not to strictly implement the draft. * "imap-metadata" is a complete implementation of RFC 5464. Kolab clients do not (yet) use these commands. * "metadata" is the common backend imap-metadata and metadata were entirely written from scratch, while imap- annotatemore is an adaption of the work by Bernhard Herzog to the new backend. You can download the code via Hg [1] or as exported tarball [2] from the Hg webinterface. Please note that the README is outdated, as are some other files. The build process is pretty much straightforward, just make sure you have the dovecot headers available on your system: ./autogen.sh ./configure --with-dovecot=/path/to/dovecot make make install Next you need to adjust your dovecot config. The following works for me: == dovecot.conf == dict { metadata = file:/var/lib/dovecot/shared-metadata } == 10-mail.conf == mail_plugins = ... metadata == 20-imap.conf == protocol imap { mail_plugins = $mail_plugins ... imap_metadata imap_annotatemore } == 90-plugin.conf == plugin { metadata_dict = proxy::metadata } To allow a Kolab client to find (e.g.) the addressbook folder, issue this IMAP command after login: SETMETADATA "path/to/folder" ("/shared/vendor/kolab/folder-type" "contact") If you find any bugs (crashes, incompatibilities with RFC 5464, etc), please write me a mail. Be advised that this code is still experimental and might crash your server! @Timo: Please have a look at the src/*-ext.[ch] files, they contain extensions to the dovecot libraries and might be useful for others, too. Kind regards, Dennis Schridde [1] http://hg.dovecot.org/dovecot-metadata-plugin [2] http://hg.dovecot.org/dovecot-metadata-plugin/archive/bdf2445e101f.tar.gz

2 1

[Dovecot] Gmail like virtual mailboxes
by Aleve Sicofante 19 Jun '11

19 Jun '11

I'm new to this list so let me introduce myself: I'm a computer literate user (I've done some C programming long ago and can run a Linux system and do some light admin), I've never installed a mail server before and I'm in the process of migrating my family and my small business from Gmail (Google Apps) to a virtual server mainly for privacy reasons. I'm in love with Gmail's label system and I just plain hate traditional folders. I use hierarchical labels (as if they were folders but with a message belonging to many at the same time) and that MUST be preserved in the migration. I've looked at Courier's IMAP keywords implementation and it looks good, but everyone on the internet is recommending Dovecot, so here I am. I've tried hard to find information about using unlimited hierarchical labels, virtual mailboxes or any other way of mimicing Gmail's functionality with Dovecot, but I'm lost. First of all: can it be done? If so, is there any introductory documentation? (I've only found very sparse information.) Is it available for any storage format (mbox, maildir, dbox)? Any help will be very appreciated. -- Aleve Sicofante

3 3

[Dovecot] Question about corrupted dbox file
by Maria Arrea 19 Jun '11

19 Jun '11

Hello We are using dovecot 2.0.13, without SIS, mdbox+zlib mailbozes. One of our users have this problem in the logs: /doveadm(amaliarubio): Error: mdbox rebuild: Failed to fix file /buzones//0b/1f/amaliarubio/storage/m.304 doveadm(amaliarubio): Error: Corrupted dbox file /buzones/0b/1f/amaliarubio/storage/m.304 (around offset=0): EOF while reading file header/ I have tried with doveadm force-resync without luck Regards Maria

1 0

[Dovecot] Vacation -- reply to another address than envelope from
by Vegard Svanberg 19 Jun '11

19 Jun '11

Vacation (Sieve) replies to the envelope address. However, I have a customer which receive e-mails from a service which sends e-mails on behalf of a user (submitted through a web form). So an e-mail would be like (envelope from and from-header is webformfromwhatever(a)foobar.com) From: webformfromwhatever(a)foobar.com To: mycustomer(a)hisdomain.com Reply-To: usersrealmailaddress(a)example.com I need the reply to go to the reply-to address. Can I handle this with Sieve? -- Vegard Svanberg <vegard(a)svanberg.no> [*Takapa@IRC (EFnet)]

2 1

[Dovecot] returned error 89
by Robert Schetterer 18 Jun '11

18 Jun '11

Hi Timo, i have very rare ( ultra rare....) failures like this with latest dovecot 2 log: Error: service(pop3-postlogin): child 16691 returned error 89 (Fatal failure) imap-postlogin: Error: script-login: Fatal: Internal error occurred. Refer to server log for more information. Jun 14 18:41:16 mail02 dovecot: log: Error: service(imap-postlogin): child 31645 returned error 89 (Fatal failure) any idea? the conf i allready posted with also rare lmtp error uid=error today first an only one seen Error: read(/var/run/dovecot/dict) failed: Timeout after 30 seconds lmtp(31698, ...@...): Error: Internal quota calculation error -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 2

[Dovecot] process already running
by Joy 18 Jun '11

18 Jun '11

Hi, I have running dovecot installation and i am quite happy with it but in one of my installation if system's power fail it doesn't remove master.pid which prevent system to start the service in next boot. I have to manually remove file and start the proess. We are running version 2.0.12. Thanks

1 0

[Dovecot] Default Global ACL
by Daniel L. Miller 17 Jun '11

17 Jun '11

Can I use the .DEFAULT files with global acls to access all mailboxes without explicitly sharing them first? Or must a share be created for every individual mailbox before they will appear in the shared namespace? -- Daniel

1 0