- dovecot - dovecot.org

[Dovecot] Pigeonhole 2.2 build issue on arm
by Tom Talpey 19 Jan '11

19 Jan '11

When building Pigeonhole 2.2 for ARM, the following warnings are produced: uri-mailto.c: In function '_parse_hex_value': uri-mailto.c:139: warning: comparison is always false due to limited range of data type uri-mailto.c:145: warning: comparison is always false due to limited range of data type The problem is a test assuming that char is a signed type : static inline int _decode_hex_digit(char digit) { ... static bool _parse_hex_value(const char **in, char *out) { char value; // <<--- change to "int". if ( **in == '\0' || (value=_decode_hex_digit(**in)) < 0 ) return FALSE; *out = value << 4; (*in)++; if ( **in == '\0' || (value=_decode_hex_digit(**in)) < 0 ) return FALSE; This is untested, but I changed the "char value" to "int value" to correct the signed comparisons. There are no warnings when building for x86 in either case, btw. Also, the two tests for "**in == '\0'" seem to be unnecessary? [/share/Public/XDove/dovecot-2.0-pigeonhole-0.2.2/src] # gcc -v Using built-in specs. Target: arm-none-linux-gnueabi Configured with: ../gcc-4.2/configure --build=i386-pc-linux-gnu --host=arm-none-linux-gnueabi --target=arm-none-linux-gnueabi --prefix=/opt --disable-nls --disable-static --with-as=/home/slug/optware/cs08q1armel/toolchain/arm-2008q1/bin/arm-none-linux-gnueabi-as --with-ld=/home/slug/optware/cs08q1armel/toolchain/arm-2008q1/bin/arm-none-linux-gnueabi-ld --enable-languages=c,c++ --disable-multilib --enable-threads --disable-libmudflap --disable-libssp --disable-libgomp --disable-libstdcxx-pch --enable-shared --enable-symvers=gnu --enable-__cxa_atexit Thread model: posix gcc version 4.2.3 [/share/Public/XDove/dovecot-2.0-pigeonhole-0.2.2/src] # make ... libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../../../.. -I./.. -I./../../.. -I/share/Public/XDove/dovecot-2.0.9 -I/share/Public/XDove/dovecot-2.0.9/src/lib -I/share/Public/XDove/dovecot-2.0.9/src/lib-dict -I/share/Public/XDove/dovecot-2.0.9/src/lib-mail -I/share/Public/XDove/dovecot-2.0.9/src/lib-imap -I/share/Public/XDove/dovecot-2.0.9/src/lib-charset -I/share/Public/XDove/dovecot-2.0.9/src/lib-index -I/share/Public/XDove/dovecot-2.0.9/src/lib-storage -I/share/Public/XDove/dovecot-2.0.9/src/lib-storage/index -I/share/Public/XDove/dovecot-2.0.9/src/lib-storage/index/raw -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -MT ntfy-mailto.lo -MD -MP -MF .deps/ntfy-mailto.Tpo -c ntfy-mailto.c -fPIC -DPIC -o .libs/ntfy-mailto.o uri-mailto.c: In function '_parse_hex_value': uri-mailto.c:139: warning: comparison is always false due to limited range of data type uri-mailto.c:145: warning: comparison is always false due to limited range of data type

2 1

[Dovecot] Problem with seeing mail after Upgrade from Courier
by apettitt 19 Jan '11

19 Jan '11

I created a new server for a webmail system because the old server crashed. When I created the server, I installed Dovecot and the old server had Courier. On the new server, I'm doing virtual users where the old one created system users. I moved all the folders over for all the users on to the new server and ran the Courier-Dovecot migration script. The files were created successfully with no issues. The issue I'm having now is that Dovecot is not seeing any mail in the user's directory. If I create a new user, it can send and receive mail with no problems. If I send an email to an existing user, it gets delivered to the new folder but dovecot does not see anything in the new folder. There is also mail in the curr folder that dovecot does not see. I'm using Roundcube as a webmail client but I've also tried using Telnet with the same results. Any ideas? -- View this message in context: http://old.nabble.com/Problem-with-seeing-mail-after-Upgrade-from-Courier-t… Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] Strange issue in NFS
by Alex Baule 19 Jan '11

19 Jan '11

Hi Timo... It's happens some strange issue with my maildir using NFS. If i use a Local Hard disk, i don't get any of this messages about memory error. Jan 12 10:57:50 brc dovecot: imap(alex(a)exemplo.com.br): Error: opendir(/storage/nfs/3/emexis/messages/ exemplo.com.br/alex/Maildir/.Drafts/new) failed: Cannot allocate memory Jan 12 10:57:51 brc last message repeated 4 times Jan 12 10:57:59 brc dovecot: imap(alex(a)exemplo.com.br): Fatal: block_alloc(262144): Out of memory Jan 12 10:57:59 brc dovecot: imap(alex(a)exemplo.com.br): Error: Raw backtrace: /opt/addons/lib/dovecot/libdovecot.so.0 [0xb768fcbe] -> /opt/addons/lib/dovecot/libdovecot.so.0 [0xb768fd1d] -> /opt/addons/lib/dovecot/libdovecot.so.0 [0xb768f273] -> /opt/addons/lib/dovecot/libdovecot.so.0 [0xb76a0183] -> /opt/addons/lib/dovecot/libdovecot.so.0 [0xb76a01cc] -> /opt/addons/lib/dovecot/libdovecot.so.0(p_strdup+0x40) [0xb76ad980] -> /opt/addons/lib/dovecot/libdovecot-storage.so.0(maildir_save_add+0x7c) [0xb7717f0c] -> /opt/addons/lib/dovecot/libdovecot-storage.so.0(maildir_copy+0x18d) [0xb7719bbd] -> /opt/addons/lib/dovecot/lib20_emexis_uis_plugin.so [0xb74fda6a] -> /opt/addons/lib/dovecot/libdovecot-storage.so.0(mailbox_copy+0x58) [0xb76ea258] -> dovecot/imap(cmd_copy+0x1cf) [0x804f87f] -> dovecot/imap(cmd_uid+0x7f) [0x80551bf] -> dovecot/imap [0x8055f0c] -> dovecot/imap [0x8055fbb] -> dovecot/imap(client_handle_input+0x3f) [0x805610f] -> dovecot/imap(client_input+0x5f) [0x8056acf] -> /opt/addons/lib/dovecot/libdo Jan 12 10:57:59 brc dovecot: master: Error: service(imap): child 28315 returned error 83 (Out of memory (vsz_limit=256 MB, you may need to increase it)) I Try to increase the vsz_limit in imap to 2048 MB, and i try too , put 0 MB (like no limit) and i still get this same error (only change the vsz_limit to my write limit). What is most used "Shared Disk" in Dovecot ? Tks Timo !!

2 2

[Dovecot] dovecot LDA, email sent to mailman list got rejected
by Umarzuki Mochlis 19 Jan '11

19 Jan '11

after a few discussion http://www.mail-archive.com/mailman-users@python.org/msg58378.html i still am getting Jan 19 15:41:48 mail-server postfix/pipe[3724]: A502F19C8A57: to=<www(a)mydomain.my>, relay=dovecot, delay=60040, delays=60002/36/0/2.1, dsn=4.3.0, status=deferred (temporary failure) dovecot version: 1.1.20 postfix version: 2.5.9-5 OS: RHEL 5 64-bit here my main.cf configs ================= # postconf -n alias_database = hash:/etc/postfix/aliases alias_maps = hash:/etc/postfix/aliases, hash:/etc/mailman/aliases allow_min_user = no biff = no bounce_queue_lifetime = 1d broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 delay_warning_time = 0h disable_vrfy_command = yes enable_original_recipient = no home_mailbox = Maildir/ html_directory = no inet_interfaces = all inet_protocols = ipv4 local_recipient_maps = mail_name = iRedMail mail_owner = postfix mail_version = 0.6.1 mailbox_command = /usr/libexec/dovecot/deliver mailbox_size_limit = 15728640 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man maximal_backoff_time = 4000s maximal_queue_lifetime = 1d minimal_backoff_time = 300s mydestination = $myhostname, localhost, localhost.localdomain, localhost.$myhostname mydomain = mydomain.my myhostname = mail-server.mydomain.my mynetworks = 127.0.0.0/8 mynetworks_style = subnet myorigin = mail-server.mydomain.my newaliases_path = /usr/bin/newaliases.postfix proxy_read_maps = $canonical_maps $lmtp_generic_maps $local_recipient_maps $mydestination $mynetworks $recipient_bcc_maps $recipient_canonical_maps $relay_domains $relay_recipient_maps $relocated_maps $sender_bcc_maps $sender_canonical_maps $smtp_generic_maps $smtpd_sender_login_maps $transport_maps $virtual_alias_domains $virtual_alias_maps $virtual_mailbox_domains $virtual_mailbox_maps queue_directory = /var/spool/postfix queue_run_delay = 300s readme_directory = /usr/share/doc/postfix-2.5.9/README_FILES recipient_bcc_maps = proxy:ldap:/etc/postfix/ ldap_recipient_bcc_maps_domain.cf, proxy:ldap:/etc/postfix/ ldap_recipient_bcc_maps_user.cf recipient_delimiter = + relay_domains = $mydestination, proxy:ldap:/etc/postfix/ ldap_relay_domains.cf relay_recipient_maps = proxy:mysql:/etc/postfix/ mysql_virtual_mailbox_maps.cf relayhost = [127.0.0.1] sample_directory = /usr/share/doc/postfix-2.5.9/samples sender_bcc_maps = proxy:ldap:/etc/postfix/ldap_sender_bcc_maps_domain.cf, proxy:ldap:/etc/postfix/ldap_sender_bcc_maps_user.cf sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_data_restrictions = reject_unauth_pipelining smtpd_enforce_tls = no smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks,permit_sasl_authenticated, check_helo_access pcre:/etc/postfix/helo_access.pcre smtpd_recipient_restrictions = reject_unknown_recipient_domain, reject_non_fqdn_recipient, reject_unlisted_recipient, check_policy_service inet:127.0.0.1:7777, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, check_policy_service inet:127.0.0.1:10031 smtpd_reject_unlisted_recipient = no smtpd_reject_unlisted_sender = yes smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = no smtpd_sasl_local_domain = smtpd_sasl_path = dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_login_maps = proxy:ldap:/etc/postfix/ldap_sender_login_maps.cf smtpd_sender_restrictions = permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated smtpd_tls_cert_file = /etc/pki/tls/certs/iRedMail_CA.pem smtpd_tls_key_file = /etc/pki/tls/private/iRedMail.key smtpd_tls_loglevel = 0 smtpd_tls_security_level = may tls_random_source = dev:/dev/urandom transport_maps = proxy:ldap:/etc/postfix/ldap_transport_maps_user.cf, proxy:ldap:/etc/postfix/ldap_transport_maps_domain.cf, hash:/etc/mailman/transport-mailman unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:ldap:/etc/postfix/ldap_virtual_alias_maps.cf, proxy:ldap:/etc/postfix/ldap_virtual_group_maps.cf, proxy:ldap:/etc/postfix/ ldap_sender_login_maps.cf, proxy:ldap:/etc/postfix/ldap_catch_all_maps.cf virtual_gid_maps = static:502 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = proxy:ldap:/etc/postfix/ ldap_virtual_mailbox_domains.cf virtual_mailbox_maps = proxy:ldap:/etc/postfix/ldap_virtual_mailbox_maps.cf virtual_minimum_uid = 502 virtual_transport = dovecot virtual_uid_maps = static:502 my master.cf: ========== # # Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #submission inet n - n - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - n - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - n - - qmqpd #pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - n - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error retry unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # #maildrop unix - n n - - pipe # flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} # # ==================================================================== # # The Cyrus deliver program has changed incompatibly, multiple times. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -m ${extension} ${user} # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/usr/lib/cyrus-imapd/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # #uucp unix - n n - - pipe # flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # ==================================================================== # # Other external delivery methods. # #ifmail unix - n n - - pipe # flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) # #bsmtp unix - n n - - pipe # flags=Fq. user=bsmtp argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # #scalemail-backend unix - n n - 2 pipe # flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store # ${nexthop} ${user} ${extension} # #mailman unix - n n - - pipe # flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py # ${nexthop} ${user} # Bypass checks for internally generated mail. #pickup fifo n - n 60 1 pickup -o content_filter= submission inet n - n - - smtpd -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_mynetworks,permit_sasl_authenticated,reject # -o content_filter=smtp-amavis:[127.0.0.1]:10026 smtps inet n - - - - smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o content_filter=smtp-amavis:[127.0.0.1]:10026 # Use dovecot deliver program as LDA. dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${user}@${domain} procmail unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/bin/procmail -r -t SENDER=${sender} RECIPIENT=${recipient} DOMAIN=${nexthop} -m USER=${user} EXTENSION=${extension} /etc/procmailrc smtp-amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes -o max_use=20 127.0.0.1:10025 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_delay_reject=no -o smtpd_client_restrictions=permit_mynetworks,reject -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks_style=host -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o smtpd_client_connection_count_limit=0 -o smtpd_client_connection_rate_limit=0 -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks,no_address_mappings # Bypass checks for internally generated mail. pickup fifo n - n 60 1 pickup -o content_filter= submission inet n - n - - smtpd -o smtpd_enforce_tls=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_mynetworks,permit_sasl_authenticated,reject # -o content_filter=smtp-amavis:[127.0.0.1]:10026 -o content_filter=smtp-amavis:[127.0.0.1]:10026 smtps inet n - n - - smtpd -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o content_filter=smtp-amavis:[127.0.0.1]:10026 -o content_filter=smtp-amavis:[127.0.0.1]:10026 # Use dovecot deliver program as LDA. dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/libexec/dovecot/deliver -f ${sender} -d ${user}@${domain} procmail unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/bin/procmail -r -t SENDER=${sender} RECIPIENT=${recipient} DOMAIN=${nexthop} -m USER=${user} EXTENSION=${extension} /etc/procmailrc smtp-amavis unix - - - - 2 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes -o max_use=20 127.0.0.1:10025 inet n - - - - smtpd -o content_filter= -o local_recipient_maps= -o relay_recipient_maps= -o smtpd_restriction_classes= -o smtpd_delay_reject=no -o smtpd_client_restrictions=permit_mynetworks,reject -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks_style=host -o mynetworks=127.0.0.0/8 -o strict_rfc821_envelopes=yes -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o smtpd_client_connection_count_limit=0 -o smtpd_client_connection_rate_limit=0 -o receive_override_options=no_header_body_checks,no_unknown_recipient_checks,no_address_mappings any hints and tips are welcomed. i already asked this in mailman & postfix mailing list and i was told to ask here instead

1 0

[Dovecot] Duplicate mail for forwards (dovecot+postfix+postfixadmin)
by Darek M 19 Jan '11

19 Jan '11

Dovecot 1.2.11, using postfixAdmin 2.3 to manage, basically using the postfixadmin schema and sql queries during install. - If I set a forward for an account to go to a remote email address, no dupes. - If I set a forward for an account to go to an email address on the same system, I get a dupe in the inbox of the second address. So if account1(a)domain.com has account2(a)domain.com as a forward, account2@ receives two copies of the same message, completely identical, same message IDs, same md5 sum. If I add account3@ into the mix, account3@ will also receive two copies of each message. I will also get a duplicate if I forward mail to account(a)anotherdomain.com, where anotherdomain.com is also hosted on the same system. account1(a)domain.com receives one copy. Here is the Dovecot log: Jan 18 17:24:40 deliver(account2(a)domain.com): Info: msgid=<4D361323.3040000(a)srvr.net>: saved mail to INBOX Jan 18 17:24:40 deliver(account1(a)domain.com): Info: msgid=<4D361323.3040000(a)srvr.net>: saved mail to INBOX Jan 18 17:24:40 deliver(account2(a)domain.com): Info: msgid=<4D361323.3040000(a)srvr.net>: saved mail to INBOX Postfix logs only show one delivery for each message, and since the headers aren't changed at all, I think the lda is at fault here. This is the entry for the account in the 'alias' table ======================== mysql> select * from alias where address='account1(a)domain.com'; +-----------------------+----------------------------------------+------------+---------------------+---------------------+--------+ | address | goto | domain | created | modified | active | +-----------------------+----------------------------------------+------------+---------------------+---------------------+--------+ | account1(a)domain.com | account1@domain.com,account2@domain.com | nyinet.com | 2010-11-28 18:07:40 | 2011-01-18 17:04:03 | 1 | Anyone have an idea of what I should be looking at in a situation like this? Does the 'goto' field look fine? -- Darek

2 1

[Dovecot] rotate logs ?
by Frank Bonnet 19 Jan '11

19 Jan '11

Hello is there an internal mechanism in dovecot to rotate logs daily ? thanks

8 10

[Dovecot] Dovecor 1.2 : Command output: Fatal: Unknown argument: flags=DRhu Usage: deliver [-c <config file>] [-a <address>] [-d <username>] [-p <path>] [-f <envelope sender>] [-m <mailbox>] [-n] [-s] [-e] [-k] )
by J4 18 Jan '11

18 Jan '11

Hi there, I changed postfix to pass email to spamassassin, and then deliver to dovecot LDA. It fails to deliver. The current entry in master.cf now reads: dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient} smtp inet n - - - - smtpd -o content_filter=spamassassin spamassassin unix - n n - - pipe user=nobody argv=/usr/bin/spamc -f -e /usr/sbin/sendmail -oi -f ${sender} ${recipient} This is the same as I had to afore I factored in spamassassin. The error message is this:- Jan 18 16:30:44 logout postfix/pipe[28952]: 56AE58230A: to=<test(a)test.info>, relay=dovecot, delay=0.01, delays=0/0/0/0.01, dsn=5.3.0, status=bounced (command line usage error. Command output: Fatal: Unknown argument: flags=DRhu Usage: deliver [-c <config file>] [-a <address>] [-d <username>] [-p <path>] [-f <envelope sender>] [-m <mailbox>] [-n] [-s] [-e] [-k] ) Does anyone know which options I should have added to dovecot deliver?

2 2

[Dovecot] v2.0.9 released
by Timo Sirainen 18 Jan '11

18 Jan '11

http://dovecot.org/releases/2.0/dovecot-2.0.9.tar.gz http://dovecot.org/releases/2.0/dovecot-2.0.9.tar.gz.sig I'm still lagging behind in my email, but I guess it's time to release v2.0.9 anyway. - Linux: Fixed a high system CPU usage / high context switch count performance problem - Maildir: Avoid unnecessarily reading dovecot-uidlist while opening mailbox. - Maildir: Fixed renaming child mailboxes when namespace had a prefix. - mdbox: Don't leave partially written messages to mdbox files when aborting saving. - Fixed master user logins when using userdb prefetch - lda: Fixed a crash when trying to send "out of quota" reply - lmtp: If delivering duplicate messages to same user's INBOX, create different GUIDs for them. This helps to avoid duplicate POP3 UIDLs when pop3_uidl_format=%g. - virtual storage: Fixed saving multiple mails in a transaction (e.g. copy multiple messages). - dsync: Saved messages' save-date was set to 1970-01-01.

13 24

[Dovecot] Dovecot Sieve
by J4 18 Jan '11

18 Jan '11

Hi, I am looking for the Dovecot Sieve mailing list. Is there one? Regards, j

2 5

[Dovecot] Sieve 0.2.2 how to use sievec
by Nikita Koshikov 18 Jan '11

18 Jan '11

Hello list, How can I compile sieve script under new 0.2.2 version from comandline? Under root: #sievec default-before.sieve sievec(root): Error: user root: Initialization failed: Namespace '': mkdir(/root/data) failed: Permission denied (euid=8(mail) egid=12(mail) missing +w perm: /root, euid is not dir owner) sievec(root): Fatal: Invalid user settings. Refer to server log for more information.

4 6