- dovecot - dovecot.org

[Dovecot] Dovecot + Solr does not index without break-imap-search?
by Jose Álvaro Domínguez Díaz 09 Feb '11

09 Feb '11

Hi folks, We are working with Dovecot 2.0.9 with Solr support and there is a thing, a little strange for us. Let me explain. We have this conf for Solr: plugin { ... fts = solr fts_solr = url=http:// solr.domain:8983/solr/ break-imap-search quota = maildir ... } With 'break-imap-search', Dovecot connects with solr, solr indexes all, searchs are fast and all works fine. BUT if we don't add 'break-imap-search', solr doesn't index anything. Logs don't report errors with debug/verbose options enabled. Somebody has any idea about this?. Thank you very much for all. Regards. -- Jose Álvaro Domínguez adominguez(a)yaco.es Yaco Sistemas S.L. http://www.yaco.es/ C/ Rioja 5, 41001 Sevilla Teléfono +34 954 50 00 57 Fax +34 954 50 09 29

2 1

[Dovecot] dsync problem
by Frank Bonnet 09 Feb '11

09 Feb '11

hello I try to convert from mbox to mdbox using dsync i get the followin error using the following command dsync mirror -u toto mbox:/user/toto:INBOX=/var/mail/toto I get this error message : mail3# dsync mirror -u toto mbox:/user/toto:INBOX=/var/mail/toto dsync(root): Fatal: execvp(-u) failed: No such file or directory dsync-local(root): Error: read() from worker server failed: EOF any infos welcome thanks

3 4

[Dovecot] Permissions in shared folders
by Lukas Haase 09 Feb '11

09 Feb '11

Hi, On my mail server I want to implement shared folders for each workgroup where there are many workgroups. One way would be to create a separate namespace for each workgroup. However, this does not scale well so I decided to use a single Shared mailbox and use ACLs: namespace public { separator = . prefix = Shared. location = maildir:/var/mail/shared:CONTROL=~/Maildir/shared } Each workgroup should get a subfolder in "Shared". Until now, this works, I create .Group1, .Group2 and assign correct group permissions and ACL files. However, now a user from group1 wants to create a subfolder in his IMAP folder. Since the permissions for /var/mail/shared/.Group1 are correct (writeable to group1 and the user is member of group1 and 'k' ACL permissions are active) I would expect it to work. However, for obvious reasons, the *sub*folder is created as /var/mail/shared/.Group1.Subfolder so it is actually not a subfolder in sense of the filesystem but rather a folder inside /var/mail/shared However, the user does (and should) not have write permissions to /var/mail/shared (only to /var/mail/shared/.Group1). Is there a way to overcome this problem? Why can't dovecot just use /var/mail/shared/.Group1/.Subfolder? Is there an option to do so? It would make everything a lot easier. The one option is to make /var/mail/shared world-writeable - which is not really a good option. A second option might be to use ACLs and give each group write permissions to /var/mail/shared. However, not even this seems very "clean" to me. What is the best way to handle this? Best regards, Luke

3 9

[Dovecot] ldap: LDAP attribute used multiple times. This is currently unsupported
by Lukas Haase 09 Feb '11

09 Feb '11

Hi, I have a problem when migrating from dovecot 1.0 to dovecot 1.2 (Debian lenny to Debian squeeze). In my dovecot-ldap.conf I have: user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,uid=system_groups_user I use the last parameter for the groups which I need for shared folders. If I only use this, everything works. However, I also use LDAP as passdb with prefetch: pass_attrs = uid=user,userPassword=password,homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid,uid=userdb_system_groups_user In this configuration I get the error in the subject line that uid is used multiple times. I know, but the message is somehow "weird" since it says it is *currently* unsupported. However, it seems to me that it is not supported any more. Is this true? Is there a reason for this? How can I fix this problem? Until now my shared folders do not works anymore because the group memberships are not assigned any more because of the missing system_groups_user parameter. Best regards, Luke

2 4

[Dovecot] critical feature from version 1 not migrated to version 2 = authentication configuration database per IP
by DaLiV＠apollo.lv 09 Feb '11

09 Feb '11

not possible make operation with dovecot version 2.x as was possible in version 1.x: requisites description: connect to dovecot service on IP1 - dovecot must serve users that related to domain1 located in database1 connect to dovecot service on IP2 - dovecot must serve users that related to domain2 located in database2 login must be with username that form not as "user@domain" but simple "user" databases may contain identical username, but they have different passwords existing version 1 config file, that allow such configuration: -------- /etc/dovecot.conf BEGIN ---------------- server mail.domain1.tld { protocols = imaps pop3s pop3 ssl_cert_file = /etc/pki/cert1.pem ssl_key_file = /etc/pki/cert1.key listen = 123.123.123.1 ssl_listen = 123.123.123.1 default_mail_env = mbox:/tmp:INBOX=/var/mail/domain1.tld/%n:INDEX=MEMORY pop3_uidl_format = %08Xu%08Xv auth default { mechanisms = plain passdb ldap { args= /etc/dovecot-ldap.conf.domain1.tld1 } userdb ldap { args= /etc/dovecot-ldap.conf.domain1.tld1 } } login_process_per_connection = yes login_max_processes_count = 4 login_processes_count = 1 } server mail.domain2.tld { protocols = imaps pop3s pop3 ssl_cert_file = /etc/pki/cert2.pem ssl_key_file = /etc/pki/cert2.key listen = 123.123.123.2 ssl_listen = 123.123.123.2 default_mail_env = mbox:/tmp:INBOX=/var/mail/domain2.tld/%n:INDEX=MEMORY pop3_uidl_format = %08Xu%08Xv auth default { mechanisms = plain passdb ldap { args= /etc/dovecot-ldap.conf.domain2.tld2 } userdb ldap { args= /etc/dovecot-ldap.conf.domain2.tld2 } } login_process_per_connection = yes login_max_processes_count = 4 login_processes_count = 1 } -------- /etc/dovecot.conf END ---------------- /etc/dovecot-ldap.conf.domain1.tld and /etc/dovecot-ldap.conf.domain2.tld refers to different ldap databases

2 2

[Dovecot] Great time savings backing a mdbox versus Maildir
by Javier Miguel Rodríguez 09 Feb '11

09 Feb '11

Hello I am writing to this mailing list to thanks Timo for dovecot 2 & mdbox. We have almost 30.000 active users and our life was sad with Maildir & backup: 24 hours for a full backup with bacula (zlib enabled maildirs, 1.4 TB). After switching to mdbox, the backup time is under 12 hours ! Instead of backing 17 millions files, with mdbox our backup is only of 1 million files, and that speeds up a lot the backup operation. Timo, here you have detailed info about the bacula backup jobs, you can use them in the wiki if you desire. If you need aditional info (hardware specs, dovecot config, etc) I can share it. *Maildir:* |//Job: Backup_Linux_buzon_us.2011-01-21_19.03.26_38 Backup Level: Full Client: "buzon_us" 2.0.3 (06Mar07) x86_64-redhat-linux-gnu,redhat,Enterprise release FileSet: "Full Buzon" 2011-01-21 19:03:26 Pool: "Pool_Linux_Buzones_US" (From Job resource) Catalog: "MyCatalog" (From Client resource) Storage: "File" (From command line) Scheduled time: 21-ene-2011 19:03:20 Start time: 21-ene-2011 19:03:29 End time: 22-ene-2011 19:46:45 Elapsed time:*1 day 43 mins 16 secs* Priority: 10 FD Files Written: 16,903,801 SD Files Written:*16,903,801* FD Bytes Written: 1,445,943,227,706 (1.445 TB) SD Bytes Written: 1,448,983,971,450 (1.448 TB) Rate:*16247.3 KB/s* Software Compression: None VSS: no Encryption: no Accurate: no Volume name(s): Buzones_US_2 Volume Session Id: 26 Volume Session Time: 1295511704 Last Volume Bytes: 1,450,628,892,676 (*1.450 TB*) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination: Backup OK//| *mdbox with mdbox_rotate_size=10m:* |Build OS: x86_64-redhat-linux-gnu redhat Enterprise release JobId: 3587 Job: Backup_Linux_buzon_us.2011-02-07_08.13.52_53 Backup Level: Full (upgraded from Incremental) Client: "buzon_us" 2.0.3 (06Mar07) x86_64-redhat-linux-gnu,redhat,Enterprise release FileSet: "Full Buzon" 2011-01-21 19:03:26 Pool: "Pool_Linux_Buzones_US" (From Job resource) Catalog: "MyCatalog" (From Client resource) Storage: "File" (From command line) Scheduled time: 07-feb-2011 08:13:44 Start time: 07-feb-2011 08:13:54 End time: 07-feb-2011 19:43:50 Elapsed time:*11 hours 29 mins 56 secs* Priority: 10 FD Files Written:*1,148,780* SD Files Written: 1,148,780 FD Bytes Written:*1,537,062,152,773 (1.537 TB)* SD Bytes Written: 1,537,218,147,402 (1.537 TB) Rate:*37130.7 KB/s* Software Compression: None VSS: no Encryption: no Accurate: yes Volume name(s): Buzones_US_4|Buzones_US_5 Volume Session Id: 101 Volume Session Time: 1296724657 Last Volume Bytes: 438,873,898,586 (438.8 GB) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination: Backup OK| Regards Javier de Miguel University of Seville

4 8

[Dovecot] sieve not working if i have override
by Paul A 08 Feb '11

08 Feb '11

Hi, I have a few domain that I'm overriding the mail_plugins, see password query below, however when I use this password query everything is working expect sieve gives me an error. How can I get around this problem? password_query = SELECT username as user, password, \ if('%d' IN ('virttest1.xxx.net', 'test2000.com'), \ 'quota imap_quota trash expire autocreate acl imap_acl',null) as userdb_mail_plugins, \ 101 as userdb_uid, 502 as userdb_gid, CONCAT('*:bytes=', CAST(quota AS CHAR)) AS quota_rule FROM mailbox WHERE username = '%u' Feb 7 18:28:20 testip5 dovecot: managesieve: Debug: Loading modules from directory: /usr/local/lib/dovecot Feb 7 18:28:20 testip5 dovecot: managesieve: Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so Feb 7 18:28:20 testip5 dovecot: managesieve: Debug: Module loaded: /usr/local/lib/dovecot/lib11_trash_plugin.so Feb 7 18:28:20 testip5 dovecot: managesieve: Debug: Module loaded: /usr/local/lib/dovecot/lib20_expire_plugin.so Feb 7 18:28:20 testip5 dovecot: managesieve: Debug: Added userdb setting: mail_plugins=quota imap_quota trash expire autocreate acl imap_acl Feb 7 18:28:20 testip5 dovecot: managesieve: Debug: Loading modules from directory: /usr/local/lib/dovecot Feb 7 18:28:20 testip5 dovecot: managesieve: Debug: Module loaded: /usr/local/lib/dovecot/lib01_acl_plugin.so Feb 7 18:28:20 testip5 dovecot: managesieve: Error: dlopen(/usr/local/lib/dovecot/lib02_imap_acl_plugin.so) failed: /usr/local/lib/dovecot/lib02_imap_acl_plugin.so: undefined symbol: client_send_tagline Feb 7 18:28:20 testip5 dovecot: managesieve: Error: Can't load plugin imap_acl_plugin: Plugin is intended to be used only by imap binary (we're managesieve) Feb 7 18:28:20 testip5 dovecot: managesieve: Fatal: Couldn't load required plugins It also complains about imap_quota. Dovecot 2.x Thanks, paul

4 5

[Dovecot] converting from maildir to mdbox ?
by Jan-Frode Myklebust 08 Feb '11

08 Feb '11

I´m considering moving from maildir to mdbox, but don´t quite see how I should do the conversion with minimal downtime. Our userdb is ldap, and the we use this setting to point to the users maildirectory: user_attrs = mailMessageStore=mail=maildir:%$:INDEX=/indexes/%1u/%1.1u/%u,mailQuota=quota_rule=*:storage=%$ i.e. every user has a "mailMessageStore" attribute in LDAP that points to his INBOX. Any ideas for how we can migrate user by user to mdbox? Can we add a mailboxFormat attribute to LDAP, and somehow get that used in the user_attrs lookup ? Ideally have it default to maildir if not set, so that the current setup isn´t changed and only migrated users are affected. Or should we be keeping the mailboxFormat as a prefix in all mailMessageStore strings ? -jf

2 1

[Dovecot] How to recover a mail box from an assertion failure
by Michael Durket 08 Feb '11

08 Feb '11

I'm running Dovecot version 1.2.11 and getting this assertion error on a user's mail: Panic: file /home/durket/dovecot-1.2.11/src/lib-index/mail-transaction-log-view.c: line 290 (mail_transaction_log_view_set): assertion failed: (min_file_seq != max_file_seq || max_file_seq != view->head->hdr.file_seq || max_file_offset != (uoff_t)-1 || min_file_offset <= view->head->sync_offset) I realize that there are newer releases of Dovecot (that even may fix this bug) but what I need to know is if there's anything I can do (like having Dovecot recreate indexes or whatnot) that will recover the user's mail (short of having to reconstruct it from backups).

2 1

[Dovecot] Auto rebuild indexes?
by Willie Gillespie 08 Feb '11

08 Feb '11

Here's an easy question for you. I'm restoring some emails from a backup. Do I need to delete or otherwise manually rebuild the indexes? dovecot.index.cache dovecot.index.log dovecot-uidlist Or will Dovecot itself detect that something is amiss and handle it on first folder access? Using Maildir with Dovecot 1.2.9

3 3