- dovecot - dovecot.org

Can sieve-script run when saving mail in Sent folder?
by Kees van Vloten 19 Nov '21

19 Nov '21

Hi everyone, Would it be possible to run a sieve-script when the mail-client sends a mail (no because smtp) on the action where the mail-client stores a copy in the Sent folder over imap? I was expecting through imapsieve_mailboxXXX_* but can find a combination of parameters are correct. Does anybody have this working? and how? - Kees

3 4

Subfolder in sieve not working as expected
by Kees van Vloten 17 Nov '21

17 Nov '21

Hi everybody, I am trying to move incoming mails into subfolders with this sieve script: require ["fileinto", "variables", "mailbox"]; if header :matches "Delivered-To" "*@*" { fileinto :create "INBOX/${2}"; } On a message to user(a)example.com I would expect it to be stored in the folder 'example.com' under 'INBOX', but instead a folder named 'INBOX\2fexample.com' is created. I tried several options: - replace / with \/ or \\/ - replace / with . - disable listescape in dovecot.conf Unfortunately nothing did the trick. Any ideas what could fix this? dovecot -n # 2.3.13 (89f716dc2): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.13 (cdd19fe3) # OS: Linux 5.10.0-9-amd64 x86_64 Debian 11.1 # Hostname: servers.example.com auth_default_realm = EXAMPLE.COM auth_gssapi_hostname = servers.example.com auth_krb5_keytab = /etc/keytab/dovecot.keytab auth_master_user_separator = * auth_mechanisms = gssapi gss-spnego plain auth_realms = EXAMPLE.COM first_valid_gid = 986 first_valid_uid = 990 imap_client_workarounds = tb-extra-mailbox-sep login_greeting = Dovecot ready. mail_debug = yes mail_gid = 986 mail_location = maildir:%h/%d/%n/store:LAYOUT=fs:FULLDIRNAME=0_FolderContent:UTF-8:INDEX=%h/%d/%n/index:CONTROL=%h/%d/%n/control:VOLATILEDIR=%h/%d/%n/volatile mail_plugins = zlib notify push_notification listescape acl mail_privileged_group = mail mail_shared_explicit_inbox = yes mail_uid = 990 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext vacation-seconds spamtest imapflags notify imapsieve vnd.dovecot.imapsieve namespace inbox { inbox = yes list = yes mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Inbox { auto = subscribe } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = ~ subscriptions = yes type = private } passdb { args = username_format=%u /etc/dovecot/master-users driver = passwd-file master = yes } passdb { args = /etc/dovecot/ldap_user_to_principal.conf.ext driver = ldap pass = yes } passdb { driver = pam } plugin { acl = vfile:/var/lib/dovecot/global-acls:cache_secs=1 acl_shared_dict = file:/var/lib/dovecot/shared-mailboxes autocreate = Trash autocreate2 = Drafts autocreate3 = Sent autosubscribe = Trash autosubscribe2 = Drafts autosubscribe3 = Sent imapsieve_mailbox1_before = file:/var/lib/dovecot/sieve/imap/learn-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Junk imapsieve_mailbox2_before = file:/var/lib/dovecot/sieve/imap/learn-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Junk imapsieve_mailbox2_name = * listescape_char = \ sieve = file:%h/%d/%n/sieve/sieve;active=%h/%d/%n/sieve/active.sieve sieve_after = /var/lib/dovecot/sieve/after sieve_before = /var/lib/dovecot/sieve/before sieve_default = /var/lib/dovecot/sieve/default.sieve sieve_extensions = +vacation-seconds +reject +notify +imapflags +spamtest sieve_global_extensions = +vnd.dovecot.pipe sieve_pipe_bin_dir = /var/lib/dovecot/sieve/bin sieve_plugins = sieve_imapsieve sieve_extprograms sieve_vacation_default_period = 1d sieve_vacation_max_period = 1d sieve_vacation_min_period = 10s sieve_vacation_use_original_recipient = yes } postmaster_address = sysadmin(a)cvanvloten.nl protocols = " imap lmtp sieve submission" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { port = 0 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 1 } service imap { executable = imap } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service submission-login { inet_listener submission { port = 465 ssl = yes } } ssl = required ssl_cert = </etc/dovecot/private/dovecot.pem ssl_cipher_list = EECDH+AESGCM:EDH+AESGCM ssl_client_ca_dir = /etc/ssl/certs ssl_curve_list = X25519:secp521r1:secp384r1:prime256v1 ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1.2 submission_client_workarounds = whitespace-before-path submission_relay_host = server.example.com submission_relay_password = # hidden, use -P to show it submission_relay_ssl = smtps submission_relay_user = dovecot@server userdb { args = /etc/dovecot/ldap_list_users.conf.ext driver = ldap result_success = continue } userdb { args = /etc/dovecot/ldap_user_domain.conf.ext driver = ldap result_success = continue } userdb { args = uid=vmail gid=vmail home=/srv/mail/vmail allow_all_users=yes driver = static } protocol lmtp { mail_plugins = zlib notify push_notification listescape acl sieve } protocol imap { mail_max_userip_connections = 50 mail_plugins = zlib notify push_notification listescape acl imap_acl imap_sieve } - Kees

3 4

Bug report: Global Mailbox UID mismatch on replication when upgrading from 2.3.13 to 2.3.17
by Dennis Højgaard | Powerhosting Support 17 Nov '21

17 Nov '21

Hi. We use dovecot for replication on two dovecot nodes (using Maildir). Worked perfectly until upgrading from 2.3.13 to 2.3.17. I found out about it a couple of days after where Queued 'full resync' requests had gone up. And then i saw some failed requests. But nothing in the log. I found out which users having trouble and saw that it was new user so i ran doveadm sync manually and got the following error: doveadm(2849817): Warning: Mailbox changes caused a desync. You may want to run dsync again: Remote lost mailbox GUID 38e69e0ba98d936142ac29004e3fea09 (maybe it was just deleted?) So i found out that dovecot-uidlist had a mismatch on the Global Mailbox UID, so global mailbox uid is not the same on both servers for new users. I don't know if there is something that has changed with regards to how this GUID is generated, because when i look at old mailboxes they are always identical on both servers. I fix this issue manually by editing dovecot-uidlist on one of the servers making the global mailbox uid on both servers identical, and then run force-resync. This works, but i guess something has changed. -- Dennis Højgaard Powerhosting Support t: +45 7222 4457 | e: dh(a)powerhosting.dk | w: https://powerhosting.dk

1 0

Postfix -> bogogilter -> Dovecot -> Sieve
by Mike 17 Nov '21

17 Nov '21

I've been trying to work out how to get postfix to accept mail, send it to bogofilter, then deliver using dovecot while allowing a global sieve filter and users able to filter mail based on the bogofilter header. I've been successful at getting it to add the bogofilter header as needed, but don't understand what I need to do in order to have it get routed to sieve. Anyone do anything like this already and have a working config? I THINK I need to make dovecot deliver mail locally using lmtp or lda, but I'm not exactly sure. Thanks for any thoughts or ideas that you might have to accomplish this. Mike.

3 2

Help needed for OAuth and WSO2 Identity Server
by Tyler Montney 16 Nov '21

16 Nov '21

As outlined here: https://doc.dovecot.org/configuration_manual/authentication/oauth2/ Can Postman https://identity.foo.mylocal:9443/oauth2/token OK. Using this command to generate the base64 token: echo -en 'n,a=test(a)foo.com,\001host=localhost\001port=143\001auth=Bearer S3cure!Password\001\001' | base64 -w0; echo I telnet to localhost 143, and run 01 AUTHENTICATE OAUTHBEARER {TOKEN}. Get 'User id is not available for user: FOO.MYLOCAL/test(a)carbon.super' (HTTP 500). It could be because Dovecot is just sending a username instead of the full email address? I can generate the same 500 error by just sending the username in Postman. ***dovecot-oauth.conf.ext*** introspection_mode = post introspection_url = https://adminusername:adminpassword@identity.foo.mylocal :9443/oauth2/introspect username_attribute = username tls_allow_invalid_cert = yes active_attribute = active active_value = true use_grant_password = yes # Have tried this, no change. #username_format = %n client_id = {CLIENTID} client_secret = {CLIENTSECRET} grant_url = https://identity.foo.mylocal:9443/oauth2/token tokeninfo_url = https://identity.foo.mylocal:9443/oauth2/tokeninfo?oauth= pass_attrs = pass=%{oauth2:access_token} ***dovecot.conf*** auth_mechanisms = $auth_mechanisms oauthbearer xoauth2 passdb { driver = oauth2 mechanisms = xoauth2 oauthbearer args = /etc/dovecot/dovecot-oauth2.conf.ext }

1 0

Dovecot and certificates/keys on PKCS11 smartcards/HSMs
by Graham Leggett 16 Nov '21

16 Nov '21

Hi all, To configure SSL on dovecot using certificates and keys in files on disk, you specify the following: # Preferred permissions: root:root 0400 ssl_cert = </etc/ssl/dovecot.pem ssl_key = </etc/ssl/dovecot.pem Is there a syntax that will allow a certificate and key to be specified on a smartcard/HSM, as is possible (for example) for httpd at https://httpd.apache.org/docs/trunk/mod/mod_ssl.html#sslcertificatefile: # Example use of a certificate and private key from a PKCS#11 token: SSLCertificateFile "pkcs11:token=My%20Token%20Name;id=45” Regards, Graham —

1 0

Bug report: Global Mailbox UID mismatch on replication when upgrading from 2.3.13 to 2.3.17
by Dennis Højgaard | Powerhosting Support 16 Nov '21

16 Nov '21

Hi. We use dovecot for replication on two dovecot nodes (using Maildir). Worked perfectly until upgrading from 2.3.13 to 2.3.17. I found out about it a couple of days after where Queued 'full resync' requests had gone up. ANd then i saw some failed requests. But nothing in the log. I found out which users having trouble and saw that it was new user so i ran doveadm sync manually and got the following error: doveadm(2849817): Warning: Mailbox changes caused a desync. You may want to run dsync again: Remote lost mailbox GUID 38e69e0ba98d936142ac29004e3fea09 (maybe it was just deleted?) So i found out that dovecot-uidlist had a mismatch on the Global Mailbox UID, so global mailbox uid is not the same on both servers. I don't know if there is something that has changed with regards to how this GUID is generated, because when i look at old mailboxes they are always identical on both servers. I fix this issue manually by editing dovecot-uidlist on one of the servers making the global mailbox uid on both servers identical, and then run force-resync. This works, but i guess something has changed. -- Dennis Højgaard Powerhosting Support *t:* +45 7222 4457 |*e:* dh(a)powerhosting.dk |*w:* https://powerhosting.dk

1 0

Subfolder in sieve not working as expected
by Kees van Vloten 16 Nov '21

16 Nov '21

On 15-11-2021 23:04, dovecot(a)ptld.com wrote: >> On 11-15-2021 3:46 pm, Kees van Vloten wrote: >> >> I am trying to move incoming mails into subfolders with this sieve >> script: >> >> require ["fileinto", "variables", "mailbox"]; >> if header :matches "Delivered-To" "*@*" >> { >> fileinto :create "INBOX/${2}"; >> } > > I am not using variables and my folders are pre-created. But just to > give you a starting point, this is what works using maildir++ format > with default directory layout. > https://doc.dovecot.org/configuration_manual/mail_location/Maildir/ > > require ["fileinto"]; > # rule:[Dovecot] > if header :contains "sender" "@dovecot.org" > { > fileinto "INBOX.Dovecot"; > } I have seen that working in the past :-) I switched to LAYOUT=fs recently because of the limitations of the dot as a folder separator (now I can have the domain-name as a folder-name). I found a nice description about folder and namespace issues here: https://forum.hestiacp.com/t/character-not-allowed-in-mailbox-name/566/4 But somehow the sieve implementation does not seem to work properly with LAYOUT=fs. What a good approach to further analyze this issue?

1 0

[Move mailboxes] 2.2.13 -> 2.3.13: Stuck on certificate verification
by phren＠ist-einmalig.de 15 Nov '21

15 Nov '21

Hi, I'm about to move all mailboxes from an old machine - running Dovecot 2.2.13 - to a new machine - running Dovecot 2.3.13 (89f716dc2). Cause the new machine is in a different location I must use SSL encryption. I followed the guide's I found, but I stuck on certificate verification: $ doveadm backup -Ru <user> tcps:<host>:12354 doveadm(<user>): Info: Received invalid SSL certificate: unable to get local issuer certificate: /CN=<host> (check ssl_client_ca_* settings?) doveadm(<user>): Error: doveadm server disconnected before handshake: Received invalid SSL certificate: unable to get local issuer certificate: /CN=<host> (check ssl_client_ca_* settings?) doveadm(<user>): Error: Disconnected from remote: Received invalid SSL certificate: unable to get local issuer certificate: /CN=<host> (check ssl_client_ca_* settings?) On port 12354 the server sends an incomplete certificate chain, whereas on port 993 everything is fine. I read that the settings - ssl_client_ca_dir - ssl_client_ca_file are not used on certificate verification for port 12354, one should use the setting ssl_ca Here are the non-default setting on the client side: $ dovecot -n # 2.3.13 (89f716dc2): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.13 (cdd19fe3) # OS: Linux 5.10.0-9-amd64 x86_64 Debian 11.1 ... ssl_ca = </etc/dovecot/dovecot_imap_chain.crt ssl_cert = </etc/ssl/letsencrypt.org/<host>.combine.crt ssl_cipher_list = EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH:+AES256:!aNULL:!eNULL:!LOW:!MEDIUM:!3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!ECDSA:!CAMELLIA ssl_client_ca_dir = /etc/ssl/certs ssl_client_ca_file = /etc/ssl/certs/ca-certificates.crt ... ssl_min_protocol = TLSv1.2 ssl_prefer_server_ciphers = yes ... verbose_ssl = yes ssl_verify_client_cert = yes According to https://doc.dovecot.org/configuration_manual/dovecot_ssl_configuration/ the setting ssl_ca should contain Issuing CA cert Issuing CA CRL Intermediate CA cert Intermediate CA CRL Root CA cert Root CA CRL But how do I build this file? I tried root certificate, root + intermediate certificate and root + intermediate + signed certificate. None of them made it work... I'm completely stuck on how to make certificate verification work. Can anyone give me a hint? Thanks in advance.

1 0

Strategies for protecting IMAP (e.g. MFA)
by Kees van Vloten 14 Nov '21

14 Nov '21

Apart from a really nice firewall firehol also supplies a good set of ip-blacklists. For public exposure of email ports, I am using the combination of firehol-firewall, firehol-blacklist, fail2ban and a whitelist based on geo-ip. The mail-client ports exposed are 993 and 465, because starttls is considered flawed nowadays: https://nostarttls.secvuln.info/) Full access from any IP (except firehol-blacklist and fail2ban) is possible over VPN (openvpn) with MFA (privacyidea). Privacyidea also supplies a mobile-app compatible with a.o. TOTP and HOTP but it provides a more secure way of enrollment (2-step). Thanks for pointing at crowdsec.net, will see if it can tighten security further in cooperation with the above. - Kees On 14-11-2021 11:33, infoomatic wrote: > I will throw in a few interesting projects which have kept my small > servers safe: > > *) firehol.org > > *) crowdsec.net > > *) www.fail2ban.org > > Have a look at those interesting projects! > > > On 13.11.21 22:16, Tyler Montney wrote: >> With the world of ransomware as it is today (aka attacks seem more >> vicious and commonplace), anything I expose to WAN must have >> additional protection. I've seen a few posts to this list on it. The >> only thing that helped was that Dovecot supports OAuth. Through OAuth >> I figure I could implement MFA. However, I'd have to host my own >> identity server. From there, Thunderbird supports OAuth so that should >> work. >> >> Since this is getting increasingly complicated, I wanted to ask before >> going further. What do you all do? Any recommendations?

4 4