- dovecot - dovecot.org

[Dovecot] Shared folders in 2.0
by B. Johannessen 09 Apr '10

09 Apr '10

Anyone using shared folders in 2.0? If so, would you care to share your configuration? I'm seeing all kinds of strangeness, and the only consistent thing so far is that my results are thoroughly inconsistent. There's a very good chance this is all because of my very limited experience with Dovecot, which is why I'd like to be able to start my experiments from a known good configuration. Anyone? Bob

1 0

[Dovecot] unknown user
by Simone Neugierig 08 Apr '10

08 Apr '10

Hi, im in the process of setting up a virtual domain next to a real one with dovecot and postfix. Looks like postfix sends the mail to deliver: #mail.info postfix/pipe[23588]: F254880ED8: to=<julius(a)abm.ath.cx>, relay=dovecot, delay=0.04, delays=0.03/0/0/0.01, dsn=5.1.1, status=bounced (user unknown) but dovecot doesnt know my user: #dovecot-info.log dovecot: Apr 08 16:16:42 Info: auth(default): passwd-file(julius(a)abm.ath.cx): unknown user my user: #/etc/dovecot/passwd julius:{PLAIN}somepassword Any ideas whats wrong? more infos: this is a debian lenny with the default postfix installation, changes to #master.cf dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -f ${sender} -d ${recipient} #main.cf dovecot_destination_recipient_limit = 1 virtual_mailbox_domains = abm.ath.cx virtual_transport = dovecot #dovecot.conf protocols = imap imaps pop3 pop3s log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log disable_plaintext_auth = no mail_location = maildir:~/Maildir pop3_uidl_format = %08Xu%08Xv auth_verbose = yes auth default { mechanisms = plain passdb passwd-file { args = /etc/dovecot/passwd } userdb static { args = uid=vmail gid=vmail home=/home/vmail/%u } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 } } } greets -- GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT! Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01

2 2

[Dovecot] Incoming mails + remote backup
by minim 08 Apr '10

08 Apr '10

Hello, I have to take two copy of incoming mails on different servers(local & remote). I am using plain server without any panel on it and using sendmail, pop3 server Dovecot. Is there a way(any configurations) to take a remote backup for all incoming mails? except configuring forwarder to each mail ID !!!! Waiting for suggestions. Thanks in advance -- View this message in context: http://old.nabble.com/Incoming-mails-%2B-remote-backup-tp28137629p28137629.… Sent from the Dovecot mailing list archive at Nabble.com.

3 9

[Dovecot] Manage mails from server
by Неворотин Вадим 08 Apr '10

08 Apr '10

I've configure Dovecot with shared namespace and IMAP ACL's to make a group mailboxes. I use maildir mailboxes, and I add dovecot-shared file to each group mailbox. So each user with access to group mailbox has their own \Seen flag. And now I need automatically delete a mail from server after 2 weeks after each user has readed email in shared mailbox. How can I from, e.g. Perl script, get \Seen flag for user and mail and then correctly delete a mail from a server? I need to create fully automatical mail system, maybe there is some HOW-TO's or examples anywhere? And will I can in 2.0 use per-user \Deleted flag, not only \Seen?

3 5

[Dovecot] Have problem with antispam plugin
by gerasew＠gmail.com 08 Apr '10

08 Apr '10

I downloaded the source code plug-in version 1.3 from http://johannes.sipsolutions.net/download/dovecot-antispam/ Unpack and make from this .config file: BACKEND=mailtrain DOVECOT=/usr/include/dovecot INSTALLDIR=/usr/lib/dovecot/modules/imap USER=root GROUP=root DEBUG=syslog DEBUG_VERBOSE=1 PLUGINNAME=antispam Dovecot cofing file: protocol imap { login_executable = /usr/lib/dovecot/imap-login mail_executable = /usr/lib/dovecot/imap mail_plugins = quota imap_quota antispam } plugin { antispam_mail_sendmail = /usr/bin/sa-learn antispam_mail_spam = --spam antispam_mail_notspam = --ham antispam_mail_tmpdir = /tmp antispam_trash_pattern_ignorecase = trash;Deleted * antispam_spam_pattern_ignorecase = junk;spam } When move message into\from "Spam" folder get error: [SERVERBUG] failed to send email In syslog: imap: antispam: plugin initialising (1.3-notgit) dovecot: IMAP(test(a)u-kon.ru): Loading modules from directory: /usr/lib/dovecot/modules/imap dovecot: IMAP(test(a)u-kon.ru): Module loaded: /usr/lib/dovecot/modules/imap/lib10_quota_plugin.so dovecot: IMAP(test(a)u-kon.ru): Module loaded: /usr/lib/dovecot/modules/imap/lib11_imap_quota_plugin.so dovecot: IMAP(test(a)u-kon.ru): Module loaded: /usr/lib/dovecot/modules/imap/lib90_antispam_plugin.so dovecot: IMAP(test(a)u-kon.ru): Effective uid=8, gid=12, home=(none) dovecot: IMAP(test(a)u-kon.ru): Quota root: name= backend=maildir args= dovecot: IMAP(test(a)u-kon.ru): Quota rule: root= mailbox=* bytes=2134810624 messages=0 dovecot: imap-login: Login: user=<test(a)u-kon.ru>, method=PLAIN, rip=192.168.10.59, lip=192.168.10.77, TLS imap: antispam: "trash" is case-insensitive wildcard match trash folder imap: antispam: "deleted *" is case-insensitive wildcard match trash folder imap: antispam: "SPAM" is exact match spam folder imap: antispam: "junk" is case-insensitive wildcard match spam folder imap: antispam: "spam" is case-insensitive wildcard match spam folder imap: antispam: no unsure folders imap: antispam: mail backend spam address --spam imap: antispam: mail backend not-spam address --ham imap: antispam: mail backend sendmail /usr/bin/sa-learn imap: antispam: mail backend sendmail arg --single imap: antispam: mail backend tmpdir /tmp dovecot: IMAP(test(a)u-kon.ru): maildir: data=/var/spool/mail/test(a)u-kon.ru dovecot: IMAP(test(a)u-kon.ru): maildir++: root=/var/spool/mail/test(a)u-kon.ru, index=, control=, inbox=/var/spool/mail/test(a)u-kon.ru dovecot: IMAP(test(a)u-kon.ru): Namespace : Using permissions from /var/spool/mail/test(a)u-kon.ru: mode=0700 gid=-1 imap: antispam: mailbox_is_unsure(Junk): 0 imap: antispam: mailbox_is_trash(INBOX): 0 imap: antispam: mailbox_is_trash(Junk): 0 imap: antispam: mail copy: from trash: 0, to trash: 0 imap: antispam: mailbox_is_spam(INBOX): 0 imap: antispam: mailbox_is_spam(Junk): 1 imap: antispam: mailbox_is_unsure(INBOX): 0 imap: antispam: mail copy: src spam: 0, dst spam: 1, src unsure: 0 imap: antispam: running mailtrain backend program /usr/bin/sa-learn imap: antispam: running mailtrain backend program /usr/bin/sa-learn imap: antispam: run program failed with exit code 9 Get sa-learn output from help this script: #!/bin/bash ( id -a sa-learn rc=$? echo "exit code $rc" exit $rc ) > /tmp/antispam.out.$$ 2> /tmp/antispam.err.$$ antispam.err - contains output as "sa-learn --help" So this means that the call comes without any parameters or with incorrect parameters. I need this to work, please help.

2 4

[Dovecot] ImapTest build problem
by Proskurin Kirill 08 Apr '10

08 Apr '10

Hello. My system is: Debian Lenny 2.6.26-2-amd64 I try to build Imaptest and follow http://www.imapwiki.org/ImapTest/Installation But get this: ./configure --with-dovecot=../dovecot-2.0.beta4 && make checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for gawk... gawk checking whether make sets $(MAKE)... yes checking whether to enable maintainer-specific portions of Makefiles... no checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking for a sed that does not truncate output... /bin/sed checking for egrep... grep -E checking for ld used by gcc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for g++... g++ checking whether we are using the GNU C++ compiler... yes checking whether g++ accepts -g... yes checking dependency style of g++... gcc3 checking how to run the C++ preprocessor... g++ -E checking for g77... no checking for f77... no checking for xlf... no checking for frt... no checking for pgf77... no checking for fort77... no checking for fl32... no checking for af77... no checking for f90... no checking for xlf90... no checking for pgf90... no checking for epcf90... no checking for f95... no checking for fort... no checking for xlf95... no checking for ifc... no checking for efc... no checking for pgf95... no checking for lf95... no checking for gfortran... no checking whether we are using the GNU Fortran 77 compiler... no checking whether accepts -g... no checking the maximum length of command line arguments... 32768 checking command to parse /usr/bin/nm -B output from gcc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc static flag -static works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool checking for ld used by g++... /usr/bin/ld -m elf_x86_64 checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking for g++ option to produce PIC... -fPIC checking if g++ PIC flag -fPIC works... yes checking if g++ static flag -static works... yes checking if g++ supports -c -o file.o... yes checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate appending configuration tag "F77" to libtool configure: creating ./config.status config.status: creating Makefile config.status: creating src/Makefile config.status: creating stamp.h config.status: creating imaptest-config.h config.status: imaptest-config.h is unchanged config.status: executing depfiles commands make all-recursive make[1]: Entering directory `/root/imaptest-20100221' Making all in src make[2]: Entering directory `/root/imaptest-20100221/src' if gcc -DHAVE_CONFIG_H -I. -I. -I.. -I/root/dovecot-2.0.beta4 -I/root/dovecot-2.0.beta4/src/lib -I/root/dovecot-2.0.beta4/src/lib-mail -I/root/dovecot-2.0.beta4/src/lib-imap -g -O2 -MT client.o -MD -MP -MF ".deps/client.Tpo" -c -o client.o client.c; \ then mv -f ".deps/client.Tpo" ".deps/client.Po"; else rm -f ".deps/client.Tpo"; exit 1; fi client.c: In function ‘client_enabled’: client.c:178: warning: assignment makes pointer from integer without a cast client.c: In function ‘client_vanished’: client.c:203: error: called object ‘3’ is not a function client.c:207: warning: passing argument 1 of ‘strlen’ makes pointer from integer without a cast client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: passing argument 1 of ‘strlen’ makes pointer from integer without a cast client.c:207: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast client.c:207: warning: cast to pointer from integer of different size client.c:207: warning: passing argument 1 of ‘__builtin_strcmp’ makes pointer from integer without a cast client.c:221: warning: assignment makes pointer from integer without a cast client.c: In function ‘client_handle_untagged’: client.c:278: warning: passing argument 1 of ‘t_str_ucase’ makes pointer from integer without a cast client.c:286: warning: passing argument 1 of ‘t_str_ucase’ makes pointer from integer without a cast client.c:312: warning: pointer/integer type mismatch in conditional expression client.c: In function ‘client_input_args’: client.c:354: warning: assignment makes pointer from integer without a cast client.c:378: warning: assignment makes pointer from integer without a cast make[2]: *** [client.o] Error 1 make[2]: Leaving directory `/root/imaptest-20100221/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/root/imaptest-20100221' make: *** [all] Error 2 -- Best regards, Proskurin Kirill

2 5

[Dovecot] dovecot upgrade problems
by Cieslak, Andreas 08 Apr '10

08 Apr '10

Hi list, i made an upgrade from dovecot 1.0RC15 to 1.1.20 the default installation was under /etc/dovecot. The upgrade installation was made under /usr/local/etc. After that i changed all the paths in the /usr/local/etc/dovecot.conf and the dovecot-binary to work with the new installation. Even path-changes were made for /etc/init.d/dovecot to work with the version 1.1.20. Changes in the /etc/init.d/dovecot: #### PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/local/sbin/dovecot NAME=dovecot DESC="mail server" test -x $DAEMON || exit 0 set -e # The init script should do nothing if dovecot is being run from inetd for p in `sed -r "s/^ *(([^:]+|\[[^]]+]|\*):)?(pop3s?|imaps?)[ \t].*/\3/;t;d" \ /etc/inetd.conf` do for q in `sed -r "s/^ *protocols[ \t]*=[ \t]*(([^\"]*)|\"(.*)\")/\2\3/;t;d" \ /usr/local/etc/dovecot.conf` do if [ $p = $q ]; then exit 0 fi done done case "$1" in start) if grep protocols /usr/local/etc/dovecot.conf | sed 's/#.*$//' | tr -d '"' | \ egrep -q '[^#]*(\bpop3s?\b|\bimaps?\b)'; then if [ -x /usr/local/libexec/dovecot/imap-login -a -x /usr/local/libexec/dovecot/imap ] \ || [ -x /usr/local/libexec/dovecot/pop3-login -a -x /usr/local/libexec/dovecot/pop3 ] #### If I leave the DAEMON-Path to =/usr/sbin/dovecot Dovecot is running fine!!! The only thing which is missing under /usr/local is the auth-master file. Under /var/run/dovecot the old auth-master file exists. Why not under the upgrade path? Anyway, here is the logging when i try to start dovecot: Apr 6 16:18:37 server dovecot: dovecot v1.1.20 starting up (core dumps disabled) Apr 6 16:18:37 server dovecot: Fatal: auth(default): Dovecot version mismatch: Master is v1.1.20, dovecot-auth is v1.0.rc15 (if you don't care, set version_ignore=yes) Apr 6 16:18:37 server dovecot: Fatal: Auth process died too early - shutting down server:/usr/local/etc# /etc/init.d/dovecot restart Restarting mail server: dovecotWarning: Last died with error (see error log for more information): Auth process died too early - shutting down Also the configuration output: dovecot -n # 1.1.20: /usr/local/etc/dovecot.conf # OS: Linux 2.6.18-4-686 i686 Debian 4.0 log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps pop3s imap ssl_key_file: /etc/ssl/private/dovecot.key disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_max_processes_count: 256 first_valid_uid: 1000 last_valid_uid: 5000 mail_access_groups: mail mail_location: maildir:~/Maildir mail_debug: yes mail_full_filesystem_access: yes mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 lda: postmaster_address: cieslak(a)folkwang-hochschule.de hostname: server log_path: /var/log/dovecot-deliver.log info_log_path: /var/log/dovecot-deliver.log sendmail_path: /usr/lib/sendmail auth default: mechanisms: login plain verbose: yes debug: yes process_size: 512 passdb: driver: passwd args: /etc/passwd passdb: driver: shadow args: /etc/shadow passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: passwd args: blocking=yes userdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf socket: type: listen master: path: /usr/local/var/run/dovecot/auth-master mode: 384 user: mail plugin: quota: maildir ###auth-master is not existing under the path /usr/local/var/run/dovecot/auth-master. Is this the fault? Can anyone help me out? Andreas Cieslak IT-Systeme Folkwang Hochschule Musik | Theater | Tanz | Gestaltung | Wissenschaft Klemensborn 39 45239 Essen Fon: 0201_4903-218 Fax: 0201_4903-288 cieslak(a)folkwang-hochschule.de www.folkwang-hochschule.de <http://www.folkwang-hochschule.de/>

4 7

[Dovecot] sasl problem
by Yavuz Maşlak 07 Apr '10

07 Apr '10

Hello I installed postfix, mysql, dovecot on freebsd7.3. Yet I can't start dovecot service. I get some errors; Apr 4 17:03:14 postfix dovecot: auth(default): Fatal: Socket already exists: /var/spool/postfix/private/auth Apr 4 17:03:14 postfix dovecot: dovecot: Fatal: Auth process died too early - shutting down How can I get rid of that ? # dovecot --version 1.2.10 # postconf -a dovecot # dovecot -n # 1.2.10: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.3-RELEASE i386 ufs base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/dovecot/cert.pem ssl_key_file: /etc/ssl/dovecot/key.pem disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: ISP Mail Server Ready. first_valid_uid: 125 last_valid_uid: 125 first_valid_gid: 125 last_valid_gid: 125 mail_location: maildir:/usr/local/virtual/%d/%n mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 lda: postmaster_address: postmaster(a)test.com auth default: mechanisms: plain login debug: yes passdb: driver: sql args: /usr/local/etc/dovecot-sql.conf userdb: driver: sql args: /usr/local/etc/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix # grep -v '^ *$#.*$\?$' /usr/local/etc/dovecot-sql.conf driver = mysql connect = host=localhost dbname=postfix user=postfix password=postfix_mysql_password default_pass_scheme = MD5 password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT maildir, 125 AS uid, 125 AS gid, CONCAT('maildir:storage=', FLOOR( quota / 1024 ) ) AS quota FROM mailbox WHERE username = '%u' AND active = '1' # postconf -n broken_sasl_auth_clients = yes command_directory = /usr/local/sbin config_directory = /usr/local/etc/postfix daemon_directory = /usr/local/libexec/postfix data_directory = /var/db/postfix debug_peer_level = 2 html_directory = /usr/local/share/doc/postfix mail_owner = postfix mailq_path = /usr/local/bin/mailq manpage_directory = /usr/local/man mydestination = localhost.$mydomain, localhost mydomain = test.com myhostname = www.test.com mynetworks_style = host newaliases_path = /usr/local/bin/newaliases proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps queue_directory = /var/spool/postfix readme_directory = /usr/local/share/doc/postfix relay_domains = proxy:mysql:/usr/local/etc/postfix/mysql_relay_domains_maps.cf sample_directory = /usr/local/etc/postfix sendmail_path = /usr/local/sbin/sendmail setgid_group = maildrop smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unauth_destination, reject_unauth_pipelining, reject_invalid_hostname, reject_rbl_client list.dsbl.org, reject_rbl_client bl.spamcop.net, reject_rbl_client sbl-xbl.spamhaus.org smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = permit_sasl_authenticated, permit_mynetworks smtpd_tls_CAfile = /etc/ssl/postfix/smtpd.pem smtpd_tls_cert_file = /etc/ssl/postfix/smtpd.pem smtpd_tls_key_file = /etc/ssl/postfix/smtpd.pem smtpd_tls_loglevel = 0 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes soft_bounce = no tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/usr/local/etc/postfix/mysql_virtual_alias_maps.cf virtual_gid_maps = static:125 virtual_mailbox_base = /usr/local/virtual virtual_mailbox_domains = proxy:mysql:/usr/local/etc/postfix/mysql_virtual_domains_maps.cf virtual_mailbox_limit = 51200000 virtual_mailbox_limit_maps = proxy:mysql:/usr/local/etc/postfix/mysql_virtual_mailbox_limit_maps.cf virtual_mailbox_limit_override = yes virtual_mailbox_maps = proxy:mysql:/usr/local/etc/postfix/mysql_virtual_mailbox_maps.cf virtual_maildir_limit_message = Sorry, this user has overdrawn their diskspace quota. Please try again later. virtual_minimum_uid = 125 virtual_overquota_bounce = yes virtual_transport = virtual virtual_uid_maps = static:125

2 4

[Dovecot] Forcing NOSELECT for a Maildir folder?
by Nils 07 Apr '10

07 Apr '10

Hello, is it at all possible, possibly without modifying the source code of Dovecot, to enforce that a mailbox gets the NOSELECT attribute? I have a namespace set up like this: namespace private { separator = / prefix = Local Folders/ location = maildir:/xyz/core/store/maildir/%u/ inbox = yes hidden = no list = yes subscriptions = yes } And the folder hierarchy my client builds based on the LIST response from Dovecot comes out as: INBOX Local Folders <--- (standard flags, but no NOSELECT) - Folder 1 -- Folder 1.1 - Folder 2 - Sent - Trash Public Folders <--- NOSELECT - Announcements That's how I expect it, except that I don't want "Local Folders" to be selectable. When I select it and list the contents, I get the contents of INBOX. I have no clue why that happens. :-/ For the public namespace, everything works as expected, so I'm lost. Basically: I want "Local Folders" to be like "Public Folders" and have \NOSELECT. In maildir_storage.c I can find places where a MAILBOX_NOSELECT flag is set, but from what I understand that's only done if the path is not a directory or if the permissions are insufficient. Random taking away of permissions on folders didn't yield the result I wanted. Either it resulted in no change, or in Dovecot complaining that the permissions were now too restrictive. Forgive me if I missed something obvious. I only studied the source using grep and nano for 10 minutes before adding an ugly hack in my client to fake that Dovecot gave the "Local Folders" mailbox the NOSELECT attribute (my client is the only one that will ever talk to my installation of Dovecot, so I can do that). The wiki also didn't mention anything on NOSELECT. Google searches didn't help either. I'd much rather have Dovecot give the response I want, rather than bending its responses around in my client. Any ideas how I can achieve that? - Nils --------------- [q@lala dovecot]# dovecot --version 1.2.11 --------------- [q@lala dovecot]# telnet 127.0.0.1 144 * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE AUTH=PLAIN AUTH=LOGIN AUTH=CRAM-MD5] Private Messages Server 0 LOGIN abc def OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT IDLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS QUOTA] Logged in 1 LIST "" "*" * LIST (\HasChildren) "/" "Local Folders" * LIST (\HasNoChildren) "/" "Local Folders/Trash" * LIST (\HasNoChildren) "/" "Local Folders/Sent" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\Noselect \HasChildren) "/" "Public Folders" * LIST (\HasNoChildren) "/" "Public Folders/Announcements" 1 OK List completed. 2 STATUS INBOX (messages) * STATUS "INBOX" (MESSAGES 4) 2 OK Status completed. 3 STATUS "Local Folders" (messages) * STATUS "Local Folders" (MESSAGES 4) 3 OK Status completed. 4 LOGOUT * BYE Logging out 4 OK Logout completed. --------------- [q@lala dovecot]# dovecot -n -c /etc/dovecot/dovecot-pm.conf # 1.2.11: /etc/dovecot/dovecot-pm.conf # OS: Linux 2.6.32-ARCH i686 base_dir: /var/run/dovecot-pm/ listen: 127.0.0.1:144 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot-pm//login login_executable: /usr/lib/dovecot/imap-login login_greeting: Private Messages Server mail_max_userip_connections: 5 mail_debug: yes mail_plugins: quota imap_quota trash acl namespace: type: private separator: / prefix: Local Folders/ location: maildir:/xyz/core/store/maildir/%u/ inbox: yes list: yes subscriptions: yes namespace: type: public separator: / prefix: Public Folders/ location: maildir:/xyz/core/store/publicmaildir/:INDEX=~/public/ list: yes auth default: mechanisms: plain login cram-md5 user: xyz passdb: driver: sql args: /etc/dovecot/dovecot-pm-sql.conf userdb: driver: static args: uid=xyz gid=xyz home=/xyz/core/store/maildir/%n plugin: quota: maildir:User Quota quota_rule: *:backend=1000C,26214400S quota_rule2: Trash:storage=25M quota_warning: storage=80%% /xyz/cronobs/QuotaWarning.php quota_warning2: messages=9500 /xyz/cronobs/QuotaWarning.php trash: /etc/dovecot/dovecot-pm-trash.conf acl_anyone: allow acl: vfile:/etc/dovecot/pm-acls --------------- [q@lala dovecot]# cat /etc/dovecot/dovecot-pm-sql.conf driver = pgsql connect = host=127.0.0.1 dbname=xyz user=abc password=def default_pass_scheme = PLAIN password_query = \ SELECT "Username" AS "username", "Password" as "password" \ FROM "users" WHERE "Username" = '%n'; --------------- [q@lala dovecot]# cat /etc/dovecot/dovecot-pm-trash.conf 1 Local Folders/Trash --------------- [q@lala dovecot]# cat /etc/dovecot/pm-acls/Announcements authenticated lrs

3 2

[Dovecot] Clients to manage ACL
by Martin Ott 07 Apr '10

07 Apr '10

Hi, is there any list with clients which support setting ACL on imap-mailboxes? Up to now, a only know about KMail and imapACLM. Thanks, Martin

7 10