- dovecot - dovecot.org

[Dovecot] Errors in strace
by Jeffrey Nikoletich 20 Nov '09

20 Nov '09

I keep getting the following when I do a strace on login processes in dovecot. Are there any issues with these errors: gettimeofday({1258671134, 941478}, {420, 0}) = 0 accept(4, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434496, u64=534434496}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 70395}, {420, 0}) = 0 accept(4, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434688, u64=534434688}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 167400}, {420, 0}) = 0 accept(6, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434496, u64=534434496}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 388157}, {420, 0}) = 0 accept(4, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434496, u64=534434496}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 570056}, {420, 0}) = 0 accept(4, 0x7fff3279b0d0, [28]) = -1 EAGAIN (Resource temporarily unavailable) epoll_wait(11, {{EPOLLIN, {u32=534434688, u64=534434688}}}, 46, 2147483647) = 1 gettimeofday({1258671135, 572030}, {420, 0}) = 0 Jeffrey N.

2 1

[Dovecot] Sieve compilation error
by Oli Schacher 20 Nov '09

20 Nov '09

Hi list Trying to get sieve for 1.2 running (dovecot sieve, not cmusieve) I'm running on centos 5.4 64bit, dovecot rpms installed from http://atrpms.net/dist/el5/dovecot/ ( dovecot-1.2.7-0_102.el5.x86_64.rpm and dovecot-devel-1.2.7-0_102.el5.x86_64.rpm ) I pulled the sieve sources ( hg clone http://hg.rename-it.nl/dovecot-1.2-sieve ) autogen.sh ./configure --with-dovecot=/usr/include/dovecot/ so far so good but make fails: [...] make[4]: Leaving directory `/work/dovecot-1.2-sieve/src/sieve-tools/debug' make[4]: Entering directory `/work/dovecot-1.2-sieve/src/sieve-tools' if gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../.. -I../../src/lib-sieve -I../../src/lib-sieve-tool -I./debug -I/usr/include/dovecot -I/usr/include/dovecot/src/lib -I/usr/include/dovecot/src/lib-mail -I/usr/include/dovecot/src/lib-index -I/usr/include/dovecot/src/lib-storage -I/usr/include/dovecot/src/deliver -std=gnu99 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -Wstrict-aliasing=2 -I/usr/kerberos/include -MT sievec.o -MD -MP -MF ".deps/sievec.Tpo" -c -o sievec.o sievec.c; \ then mv -f ".deps/sievec.Tpo" ".deps/sievec.Po"; else rm -f ".deps/sievec.Tpo"; exit 1; fi make[4]: *** No rule to make target `/usr/include/dovecot/src/lib-storage/register/libstorage-register.a', needed by `sievec'. Stop. make[4]: Leaving directory `/work/dovecot-1.2-sieve/src/sieve-tools' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/work/dovecot-1.2-sieve/src/sieve-tools' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/work/dovecot-1.2-sieve/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/work/dovecot-1.2-sieve' make: *** [all] Error 2 Any hints? Thanks in advance Oli

3 3

Re: [Dovecot] Dovecot and SATA Backend - filesystems
by John Lyons 19 Nov '09

19 Nov '09

> The "generally don't see any bugs/issues" is the part I'm worried about > (generally isn't comforting). I was covering my **** on that one. Sods law dictates as soon as I say 'never' we'll discover an issue. > If you use a more traditional filesystem like ext2/ext3/ufs/etc then yes. > But you can use a cluster filesystem to get around this, and run > active-active. I've spent a week looking at the likes of PVFS, GFS, Lustre and a whole host of different systems, including pNFS (NFS 4.1) At the risk of diverting the thread away from the SATA backend, is there any recommendation for a fault tolerant file service. I'm really looking for 3 or 4 boxes to store data/metadata to support 10 Apache and Dovecot servers. The things I don't like are having a single metadata server be a single point of failure. Regards John

2 1

[Dovecot] Fwd: Re: Dovecot and SATA Backend
by Joseba Torre 19 Nov '09

19 Nov '09

I suppose this was for the list... -- Joseba Torre. Vicegerencia de TICs, área de Explotación

2 1

[Dovecot] configurable sieve_max_redirects
by Maciej Polewczyński 19 Nov '09

19 Nov '09

Witam Sieve implementation in dovecot 1.2 have hard-coded limit for max redirect: SIEVE_DEFAULT_MAX_REDIRECTS 4. I have to rise this to much higher value, e.g. 64. Is there possibility to do this another way than recompiling source? Maybe adding an option to dovecot.conf in plugin section will be a good idea. -- Pozdrowienia Maciej Polewczynski Registered Linux user #117725 OGICOM Sp. z o.o., 61-131 Poznan, ul. Baraniaka 88 REGON 634407251, NIP 781-17-20-476, KRS 0000140692 kapital zakladowy: 410 000 PLN

3 3

Re: [Dovecot] Combination of default domain and username character translation problem in POP3 server configuration
by Steffen Kaiser 19 Nov '09

19 Nov '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thu, 19 Nov 2009, Javier Vico Egea wrote: > In that case it works perfect but my problem are all the users using the old > vm-pop3 configuration with XXX!mysecondarydomain.es Yep, I just wanted confirmation :) There is currently no way to change this behaviour by configuration, but src/auth/auth-request.c contains function auth_request_fix_username(): The default domain is appended, before the character translation takes place. ======== if (strchr(username, '@') == NULL && request->auth->default_realm != NULL) { user = p_strconcat(request->pool, username, "@", request->auth->default_realm, NULL); } else { user = p_strdup(request->pool, username); } for (p = (unsigned char *)user; *p != '\0'; p++) { if (request->auth->username_translation[*p & 0xff] != 0) *p = request->auth->username_translation[*p & 0xff]; if (request->auth->username_chars[*p & 0xff] == 0) { *error_r = t_strdup_printf( "Username contains disallowed character: " "0x%02x", *p); return NULL; } } ========= I would change the first if() into: ========= if (strchr(username, '@') == NULL && strchr(username, '!') == NULL && request->auth->default_realm != NULL) { ========= Note the strchr() in the second line. The default domain is not appended, if either an Ad sign or exclamation mark is present in the username. Maybe, you ask Timo to have a way to conditionally let replace a set of characters into '@' before this check. Regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSwVYSnWSIuGy1ktrAQI/4gf/TFGCcTnIaxWsZiRFi/P0iSr0uyPdFP8+ dQMgAVkYYt/sP7PH28vZbMHHtiBtIb7T3FTiuNclXXZcLrfj3NX3zf8XfNFknd4j BzcghW+wE+2I9v4O5/WmKRD79herBCGOTnswOMcRk9zPrIL2lEjuDhOFsePQXjTI IYBybQx+EebAYRUwtVgUc1leQtaD02QtFLLM2EbIbIbNhnYLaOr6+YQs2Ghi6LpL MAbfsRh00L/AmY5NNXZUPK2UKpTyppBxVMwwv+K12FqABzs6PAdQz8LpdwqrRDOX 7Raze+KD4U9M9imLVgcD8dgdRnl6wGQJnTFiA0kgb0fyEqk/pL/tpg== =KieQ -----END PGP SIGNATURE-----

1 0

Re: [Dovecot] Combination of default domain and username character translation problem in POP3 server configuration
by Steffen Kaiser 19 Nov '09

19 Nov '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thu, 19 Nov 2009, Javier Vico Egea wrote: > auth default: > default_realm: myprincipaldomain.es > username_chars: > abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@! > username_translation: !@ > passdb: > driver: passwd-file > args: /etc/virtual/%d/passwd Hmm, what happens, if you login with: prueba(a)mysecondarydomain.es ? Note the @ Does it work? > userdb: > driver: static > args: uid=500 gid=500 home=/var/spool/virtual/%d Each use should have an unique home dir, I think. Regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBSwVMWXWSIuGy1ktrAQIRiggArndG34u+zfOU41LXb8Nj6A5UMQ8o1cMv P8Ax+uKXyo9b7kae5N+ZeMkiVVMiALmMr6e7HJeKbTUdl6CFVc+Wa0TBdlpNVEJ0 d49A4IetnfVSWlfu21VR5hpenpsNE2E8JRHQ5Mb0eBaEFneT/VEk2YB7WfsmsvbF pS2gXhnBl1q8x+VtC/y5fyYB/P8urQU8wwdVTb809fLxUuMVDEUC77bHtXBtRHYT C0mF3ZyRmh3vFLwBb6e7VwhWkttbKlAzO7lsfNujEqA0dpjzeA+qOw+A2JmyH6sl ZTFpDWc/jv12+7m+AJB46CsPeKZ8/cfFVITni6G7aBrmGPseIVF3+w== =il6+ -----END PGP SIGNATURE-----

2 1

Re: [Dovecot] Combination of default domain and username character translation problem in POP3 server configuration
by Charles Marcus 19 Nov '09

19 Nov '09

On 11/19/2009, Javier Vico Egea (j.vico(a)dipualba.es) wrote: > # 1.0.7: /etc/dovecot.conf Not that this is the cause of your problem, but you do need to upgrade...

1 0

[Dovecot] Combination of default domain and username character translation problem in POP3 server configuration
by Vico 19 Nov '09

19 Nov '09

Hello, I have a mail server running vm-pop3 and I am migrating it to Dovecot. I have a problem configuring Dovecot as a POP3 server only (I'm not interested in IMAP for now). I have two types of domains: one principal domain, whose users don't include the domain in the login process; and secondary domains, whose users include the domain part with the ! separator, instead of @ (i.e. prueba!mysecondarydomain.es). Because of that, I have set the following options in the configuration file: auth_default_realm = myprincipaldomain.es auth_username_translation = !@ The combination of these two parameters produces the following effect when I login with an user of a secondary domain (I have no problem with principal domain authentication): +OK Bienvenido al servidor de correo. user prueba!mysecondarydomain.es +OK pass prueba. -ERR Authentication failed. quit +OK Logging out This is the resulting log: Nov 19 09:58:51 prueba dovecot: auth(default): new auth connection: pid=21953 Nov 19 09:59:04 prueba dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.1.84 rip=192.168.17.13 resp=AHBydWViYSF0b2JhcnJhLmVzAHBydWViYS4= Nov 19 09:59:04 prueba dovecot: auth(default): passwd-file(prueba@mysecondarydomain.es@myprincipaldomain.es,192.168.17. 13): no passwd file: /etc/virtual/mysecondarydomain.es(a)myprincipaldomain.es/passwd Nov 19 09:59:05 prueba dovecot: auth(default): client out: FAIL 1 user=prueba@mysecondarydomain.es@myprincipaldomain.es So, I think the problem is Dovecot tests if the default domain is needed before the character translation is done, so the character ! is not detected as a domain separator, so the default domain is always appended. The question is how I could resolve this problem. I need these two operations to be done because there is a lot of users already working with this configuration. Thank you in advance.

3 2

Re: [Dovecot] failed: Permission denied missing +w perm: /home/mail_virtual/2001
by Jürgen Herrmann 19 Nov '09

19 Nov '09

On Wed, November 18, 2009 17:29, Timo Sirainen wrote: > On Wed, 2009-11-18 at 16:17 +0100, Jürgen Herrmann wrote: >> 2009-11-18 16:04:24 dovecot: Fatal: chdir(/home/mail_virtual/2001) failed: >> Permission denied (euid=2001 egid=2001 stat(/home/mail_virtual/2001) >> failed: Permission denied missing +w perm: /home/mail_virtual/2001) > > so "ls -dln /home/mail_virtual/2001" actually shows that the owner and > group is 2001? app3:~# ls -dln /home/mail_virtual/2001 drwx------ 4 2001 2001 4096 18. Nov 13:59 /home/mail_virtual/2001 app3:~# ls -dln /home/mail_virtual/2001/Maildir/ drwx------ 54 2001 2001 4096 18. Nov 18:07 /home/mail_virtual/2001/Maildir/ > > Do you have SELinux or something similar enabled? > no. regards, jürgen -- >> XLhost.de - eXperts in Linux hosting ® << XLhost.de GmbH Jürgen Herrmann, Geschäftsführer Boelckestrasse 21, 93051 Regensburg, Germany Geschäftsführer: Volker Geith, Jürgen Herrmann Registriert unter: HRB9918 Umsatzsteuer-Identifikationsnummer: DE245931218 Fon: +49 (0)800 XLHOSTDE [0800 95467833] Fax: +49 (0)800 95467830 WEB: http://www.XLhost.de IRC: #XLhost(a)irc.quakenet.org

2 2