- dovecot - dovecot.org

[Dovecot] Error in IMAP command UID: Unknown thread algorithm.
by Ralf Hildebrandt 28 Apr '09

28 Apr '09

Our Squirrelmail offers "Thread based sorting". Now, I have one user, where the activation of thread sorting results in: FEHLER: Falsche oder ungültige Anfrage. Anfrage: THREAD ORDEREDSUBJECT ISO-8859-1 ALL Server antwortete: Error in IMAP command UID: Unknown thread algorithm. Why is that? -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12200 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 Ralf.Hildebrandt(a)charite.de | http://www.charite.de

2 1

[Dovecot] [Fwd: Re: [Pine-info] "incomplete SecBuffer exceeds maximum buffer size" ?]
by Stewart Dean 27 Apr '09

27 Apr '09

Forgive me if I've been asleep at the switch on the SSL problem and it's already been figured out, but....could this be what the prob is? -------- Original Message -------- Subject: Re: [Pine-info] "incomplete SecBuffer exceeds maximum buffer size" ? Date: Mon, 27 Apr 2009 09:47:04 -0700 (PDT) From: Steve Hubert <hubert(a)washington.edu> Organization: Univ of Washington; UW Technology; Seattle To: Pine Forum <pine-info(a)u.washington.edu> References: <Pine.WNT.4.64.0904261823300.-1877079@zuluone> There is a feature called quell-ssl-largeblocks that addresses this. In alpine it is called "Prevent SSL Largeblocks". The help text in alpine says FEATURE: Prevent SSL Largeblocks PC-Alpine only. This feature changes the behavior of fetching messages and attachments so that the message data is fetched in chunks no larger than 12K bytes. This works around a bug in Microsoft's SSL/TLS support. Some versions of Microsoft SSL are not able to read full-sized (16K) SSL/TLS packets. Some servers will send such packets and this will cause PC-Alpine to crash with the error incomplete SecBuffer exceeds maximum buffer size Microsoft is aware of the problem and has developed a hotfix for it, it is discussed in article 300562 in the Microsoft Knowledge Base. _______________________________________________ Pine-info mailing list Pine-info(a)u.washington.edu http://mailman1.u.washington.edu/mailman/listinfo/pine-info -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 0

[Dovecot] Log File per Domain
by Darvin Denmian 27 Apr '09

27 Apr '09

Hello list, i need to know if is possible to create a log file per domain, like: /home/vmail/%d/maillog i'm thinking use : log_path = /home/vmail/%d/maillog , this will work? Thanks !!

4 4

[Dovecot] Testing HEAD
by Odhiambo ワシントン 27 Apr '09

27 Apr '09

I have successfully compiled HEAD on FreeBSD-7 and I hope I am not doing anything weird. ./configure \ --cache-file=../cache_file \ --prefix=/opt/dovecot2 \ --with-ioloop=kqueue \ --with-notify=kqueue \ --with-sql=yes \ --with-mysql \ --with-zlib \ --with-bzlib \ --with-ssl=openssl \ --with-sql-drivers FreeBSD-7# pwd /opt/dovecot2 FreeBSD-7# ls -al sbin/dovecot* -rwxr-xr-x 1 root wheel 132924 Apr 27 16:59 sbin/dovecot -rwxr-xr-x 1 root wheel 100452 Apr 27 16:59 sbin/dovecotpw FreeBSD-7# ./sbin/dovecot -n dovecot: illegal option -- n Usage: dovecot [-F] [-c <config file>] [-p] [-n] [-a] [-cb <config binary path>] [--version] [--build-options] FreeBSD-7# ./bin/doveconf doveconf: Fatal: Error in configuration file /opt/dovecot2/etc/dovecot.conf line 1048: Unknown setting: user PS: This is the default config it shipped with. Nothing changed so far. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ "Clothes make the man. Naked people have little or no influence on society." -- Mark Twain

2 1

[Dovecot] Compiling dovecot-sieve-1.1.6 against dovecot-1.1.14
by Bruce Bodger 26 Apr '09

26 Apr '09

When attempting to compile dovecot-sieve-1.1.6 against dovecot-1.1.14 using the following command line to config... G520X2:~/Temp/dovecot-sieve-1.1.6 root# ./configure --with-dovecot=../ dovecot-1.1.14 make fails with the following... G520X2:~/Temp/dovecot-sieve-1.1.6 root# make make all-recursive Making all in src Making all in libsieve /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 - Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith - Wchar-subscripts -Wformat=2 -Wbad-function-cast -DENABLE_REGEX -o sievec sievec.o map.o imparse.o libsieve.la /Users/BB/Temp/ dovecot-1.1.14/src/lib/liblib.a gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing- declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad- function-cast -DENABLE_REGEX -o sievec sievec.o map.o imparse.o ./.libs/libsieve.a /Users/BB/Temp/dovecot-1.1.14/src/lib/ liblib.a ld: Undefined symbols: _printf$LDBLStub _snprintf$LDBLStub _sprintf$LDBLStub _fprintf$LDBLStub make[3]: *** [sievec] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 This is the top of config.log. Please let me know if you'd like to see any additional information. hostname = G520X2.xxxxxx.COM uname -m = Power Macintosh uname -r = 8.11.0 uname -s = Darwin uname -v = Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC /usr/bin/uname -p = powerpc /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = Mach kernel version: Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Kernel configured for up to 2 processors. 2 processors are physically available. Processor type: ppc970 (PowerPC 970) Processors active: 0 1 Primary memory available: 5.00 gigabytes Thank you, B. Bodger

1 0

[Dovecot] Non-atomic Flags in APPEND
by Richard Laager 26 Apr '09

26 Apr '09

I'm using Evolution and Dovecot (on the localhost) and receiving these errors trying to move a message into the IMAP folder: C00095 APPEND INBOX (\Answered \Seen NotJunk "Junk" "NotJunk" "receipt-handled") {1022} C00095 BAD Error in IMAP command APPEND: Flags list contains non-atoms. Is this a Dovecot or Evolution bug? Thanks, Richard $ dovecot -n # 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28-11-generic i686 Ubuntu 9.04 log_timestamp: %Y-%m-%d %H:%M:%S login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: mbox:~/Private/mail auth default: passdb: driver: pam userdb: driver: passwd

3 2

[Dovecot] Dovecot auth user lookup patch for maildrop
by mr.maX 26 Apr '09

26 Apr '09

Hi, recently I started using maildrop as a MDA doing lightweight filtering in a Postfix/Dovecot mail server combo. Only thing missing was the fact that maildrop couldn't perform user lookups against a user database that was already being served by Dovecot (for smtp auth in Postfix and for imap access obviously) in order to easily determinate proper mailbox location and home directory of my "virtual" users when delivering e-mails. I wanted to avoid having another authentication daemon running (Courier Authlib) that would be serving this data to maildrop, so I've spent some time to write an extension for maildrop that would allow it to do user lookups directly against Dovecot in a similar way how they are done by Dovecot's LDA deliver. For everyone that are using maildrop in a similar setup that may be interested in this extension, a patch against maildrop version 2.0.4 can be downloaded from the following location: http://www.max.rs/ozone/maildrop-2.0.4-dovecotauth.patch.txt When this patch is applied, maildrop will be extended with another command line option "-t", which can be used to specify the location of Dovecot's master auth socket that will be used when performing user lookups. There's a readme file (README.dovecotauth) together with patch with a little bit more information regarding the use of this extension. I hope that some of you may find my modification to maildrop useful. -- Best Regards, Marko Njezic - mr.maX @ MAX Interactive corp. Personal: http://www.markonjezic.com/ MAX's Empire: http://www.maxempire.com/ MAX's HTML Beauty++ 2004: http://www.htmlbeauty.com/

3 3

[Dovecot] Why not just ignore sieve include error and continue read and execute the rest of sieve rules?
by Zhang Huangbin 24 Apr '09

24 Apr '09

Hi, all. I use a global sieve script and include user's personal sieve script in it, but it doesn't run while user's sieve script not exist. Why not just ignore this error and continue read and execute the rest of sieve rules? My global script: ---- require ["include"]; include :personal ".dovecot.sieve"; ---- Sieve log while user's personal sieve script doesn't exist: ---- Info: Loading modules from directory: /usr/lib64/dovecot/lda Info: Module loaded: /usr/lib64/dovecot/lda/lib10_quota_plugin.so Info: Module loaded: /usr/lib64/dovecot/lda/lib90_cmusieve_plugin.so Info: auth input: home=/home/vmail/a.cn/www/ Info: auth input: quota_rule=*:bytes=104857600 Info: auth input: sieve_dir=/home/vmail/sieve/a.cn/www/ Info: Quota root: name= backend=maildir args= Info: Quota rule: root= mailbox=* bytes=104857600 messages=0 Info: maildir: data=//home/vmail/a.cn/www//:INDEX=//home/vmail/a.cn/www// Info: maildir++: root=//home/vmail/a.cn/www/, index=, control=, inbox=//home/vmail/a.cn/www/ Info: cmusieve: /home/vmail/a.cn/www//.dovecot.sieve doesn't exist Info: cmusieve: Using sieve path: /home/vmail/.dovecot.sieve Info: cmusieve: Executing script /home/vmail/.dovecot.sievec Info: cmusieve: Script not found: /home/vmail/sieve/a.cn/www//.dovecot.sieve Info: include: Script not found: '.dovecot.sieve' Info: sieve runtime error: Include can not find script Error: sieve_execute_bytecode(/home/vmail/.dovecot.sievec) failed Info: msgid=<49F117C9.8020505(a)b.cn>: saved mail to INBOX ---- -- Best regards. Zhang Huangbin - Open Source Mail Server Solution for RHEL/CentOS 5.x: http://code.google.com/p/iredmail/

2 1

[Dovecot] uidvalidity file
by Jeff Grossman 24 Apr '09

24 Apr '09

Should I be considered with this log entry? rename(/home/vmail/jeff/dovecot-uidvalidity, /home/vmail/jeff/dovecot-uidvalidity) failed: No such file or directory

2 2

[Dovecot] Virtual mailboxes, howto, examples, help? =)
by Brandon Lamb 24 Apr '09

24 Apr '09

Using 1.2rc3 maildir format maildir /mail/example.com/j/johndoe/{cur,new,tmp} Is there more documentation and examples on how to configure virtual mailboxes, or maybe more info on what it is suppose to do? From what I could understand on the wiki, i could create a fake/virtual folder under /mail/example.com/j/johndoe/virtual/allmail/ and inside that dir create dovecot-virtual with INBOX all And then in my mail client i would see virtual/allmail and when i click that folder it shows me mail from all my normal maildir folders? Is my thinking of how to use virtual mailboxes totally off, or am I trying to use it for what it is suppose to be used for? So far i have been messing with various values = yes/no using the following namespace private { prefix = virtual/ separator = / # location = virtual:~/virtual location = virtual:~/virtual:LAYOUT=maildir++ list = yes inbox = no subscriptions = yes hidden = no } # The default namespace that is visible to IMAP clients namespace private { prefix = separator = / location = maildir:~/ list = yes inbox = yes subscriptions = yes hidden = no } I dont know if I am retarded in my lack of ability to figure this out or what

1 0