- dovecot - dovecot.org

[Dovecot] newbie: problem with IMAPS + mutt + Thunderbird
by Toni Mueller 04 Jul '08

04 Jul '08

Hi, I'm a Dovecot newbie and have some problems with the configuration/the resulting interoperability. My setup looks like this: I receive my mail using qmail-ldap and sort it with a number of means into ~/Mailbox/ (= INBOX) and ~/Mail/folder/ for various values of 'folder' (generally one folder per mailing list). The sorting is done via .qmail-* files, LDAP entries, and procmail (this is a "legacy" setup that I'd rather not change too much). I usually access my mail using 'mutt' on the local machine (Debian 4.0), and everything is fine. I'd like to be able to access the same email using Thunderbird over IMAPS as well, to gain foreign character support (ie, Chinese), while continuing to use mutt as my main MUA. There are, so far, two problems with this setup: 1. I can't find the folders in ~/Mail/. As an interim solution, I symlinked them from my ~/Mailbox/ dir, but this is _dead_ugly_. 2. (MUCH more serious) As soon as I access the email using Thunderbird, Dovecot moves all new mail from somefolder/new to somefolder/cur, thereby making mutt flag all my new mail as 'O' ("old") which was flagged 'N' ("new") before. If I remember which the new mails were, I can flag them as 'N' in mutt, and they get moved to .../new again, but this isn't usually the case because my mailboxen are often large (> 10.000 messages), and it's undone as soon as I access the mailbox with Thunderbird (over IMAPS). I also have a wish list. Both Mutt and Dovecot (can) make use of index files to speed mail access. It would be great if this could be unified so that both programs use the same index files (in a consistent manner, of course). The software versions I currently use are these: Mutt: 1.5.17+2008011 Dovecot: 1.0.13-1~bpo40 Thunderbird: 1.5.0.13+1.5.0 Dovecot configuration: log_timestamp: %Y-%m-%dT%H:%M:%S protocols: imaps ssl_listen: 10.10.10.1:993 login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_processes_count: 2 login_max_processes_count: 20 max_mail_processes: 30 first_valid_uid: 2000 first_valid_gid: 2000 mail_location: maildir:~/Mail:INBOX=~/Mailbox/ mail_debug: yes auth default: verbose: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.conf Kind regards, --Toni++

1 1

[Dovecot] litte problems upgrade from 1.0.x to 1.1.1
by Andre Hübner 04 Jul '08

04 Jul '08

Hi List, last time i did a lot of packaging and installing different versions of dovecot 1.0.x (rc not included ;) )and all was fine. Now a have a little problem. In this case it was an update from 1.0.13 to 1.1.1 Sometime it happens that 1 user out of x (more than 100) got this standardmessage for ~1 or ~2 thousend times in his mailbox (mbox) for example: >From MAILER_DAEMON Mon Sep 18 16:16:14 2006 Date: Mon, 18 Sep 2006 16:16:14 +0200 From: Mail System Internal Data <MAILER-DAEMON@myhostname> Subject: DON'T DELETE THIS MESSAGE -- FOLDER INTERNAL DATA Message-ID: 1158588974@myhostname X-IMAP: 1158588973 0000001177 Status: RO This text is part of the internal format of your mail folder, and is not a real message. It is created automatically by the mail system software. If deleted, important folder data will be lost, and it will be re-created with the data reset to initial values. I can follow this in maillog: Jul 1 16:01:04 myhostname dovecot: POP3(username): Disconnected: Logged out top=0/0, retr=1177/21638, del=1177/1177, size=454 The Mails came from nowhere from one moment to other. But it seems that it was not first pop-login after dovecot update. Update time was 14:57 Uhr. Pop-Login which "created" this mails was 3rd after update. It is not a big problem, seems to happens one only time but i want to know the backgrounds. Do you need further data? My 1.1.1 /etc/dovecot.conf looks like this: protocols = imap imaps pop3 pop3s ssl_disable = no ssl_cert_file = "/etc/*.hostname.com.crt" ssl_key_file = "/etc/*.hostname.com.key" ssl_ca_file = "/etc/*.hostname.com.bundle.crt" disable_plaintext_auth = no syslog_facility = mail login_user = dovecot login_process_per_connection = no login_processes_count = 1 login_greeting = hostname.com mailserver ready. login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c login_log_format = %$: %s max_mail_processes = 100 verbose_proctitle = yes auth_verbose = yes mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u #default_mail_env = mbox:~/mail:INBOX=/var/spool/mail/%u mail_cache_min_mail_count = 30 mmap_disable=no mail_debug=no lock_method = flock mbox_read_locks = dotlock mbox_write_locks = dotlock fcntl mbox_dirty_syncs = yes mbox_very_dirty_syncs = yes mbox_lazy_writes = no ## ## IMAP specific settings ## protocol imap { login_executable = /usr/libexec/dovecot/imap-login imap_client_workarounds = outlook-idle netscape-eoh tb-extra-mailbox-sep delay-newmail mail_plugins = mail_log } ## ## POP3 specific settings ## protocol pop3 { ssl_disable = no login_executable = /usr/libexec/dovecot/pop3-login mail_executable = /usr/libexec/dovecot/pop3 pop3_no_flag_updates = no pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = oe-ns-eoh outlook-no-nuls } ## ## Authentication processes auth default { mechanisms = plain passdb shadow { } userdb passwd { } user = root } ## ## Plugins ## plugin { } Thanks Andre

3 2

[Dovecot] Can I stop users from creating and renaming folders?
by Linspeed 04 Jul '08

04 Jul '08

Hello I have a Dovecot IMAP account running. It's a shared account between a few people. I want to stop users being able to rename existing folders and to stop them creating new ones. I've searched for this, so I suspect the answer is no. Is it possible? Thanks -- View this message in context: http://www.nabble.com/Can-I-stop-users-from-creating-and-renaming-folders--… Sent from the Dovecot mailing list archive at Nabble.com.

2 3

Re: [Dovecot] litte problems upgrade from 1.0.x to 1.1.1
by Andre Hübner 04 Jul '08

04 Jul '08

Hi, > It's not UW-IMAP (the server). It's PINE or Alpine (the client). Those are > usually found in on-disk mbox files that have been created by PINE/Alpine. > The message is ignored by PINE/Alpine (obviously), but when you switch to > a different mailer, it doesn't know to ignore it (and shouldn't be > expected to). AFAIK, the only solution is to delete the messages. i do not think it is client related. (never heared of this clients) Seems to be a normal dovecot internal message (timo?) But dovecot should not deliver this message as real mail, regardless of which client is used. Furthermore we face this issue only by updating to 1.1.1, all earlier versions did not show this behavior. Andre

1 0

[Dovecot] Different PROXY for IMAP and POP3 using LDAP-auth
by Ralf Becker 04 Jul '08

04 Jul '08

Hello everybody! I'm trying to configure dovecot 1.1.1 with different proxy hosts and/or ports for different protocols (IMAP, POP3). I'm using LDAP for authentication. I've tried: 1) Variable in "auth default" configuration: [dovecot.conf] passdb ldap { args = /usr/local/etc/dovecot-ldap-%Ls.conf } userdb ldap { args = /usr/local/etc/dovecot-ldap-%Ls.conf } With results in dovecot not starting with error message: Can't open configuration file /usr/local/etc/dovecot-ldap-%Ls.conf: No such file or directory So %Ls was not replaced. 2) Variable in pass_attrs [dovecot-ldap.conf] pass_attrs = \ uid=user,userPassword=password,homeDirectory=userdb_home,\ uidNumber=userdb_uid,gidNumber=userdb_gid,\ dovecotProxy%Ls=proxy,dovecotHost%Ls=host,dovecotPort%Ls=port With results in this LDAP server log entries: SRCH attr=uid userPassword homeDirectory uidNumber gidNumber dovecotProxy%Ls dovecotHost%Ls dovecotPort%Ls So %Ls was not replaced also. mmmh... Would it be an option to use multiple "auth" sections? E.g: auth pop3 { ... passdb ldap { args = /usr/local/etc/dovecot-ldap-pop3.conf } userdb ldap { args = /usr/local/etc/dovecot-ldap-pop3.conf } ... } auth imap { ... passdb ldap { args = /usr/local/etc/dovecot-ldap-imap.conf } userdb ldap { args = /usr/local/etc/dovecot-ldap-imap.conf } ... } I'm in doubt because of http://markmail.org/message/rcpcm67g56kxxdyq Any ideas? Regards, Ralf Becker -- ______________________________________________________________________ Dipl.-Inform. (FH) Ralf Becker Rechenzentrum (r/ft) der FH Trier (Network|Mail|Web|Firewall) University of applied sciences Administrator Schneidershof, D-54293 Trier Mail: beckerr(a)fh-trier.de Fon: +49 651 8103 499 Web: http://www.fh-trier.de/~beckerr Fax: +49 651 8103 214 PubKey: http://www.fh-trier.de/~beckerr Crypto: GnuPG, S/MIME ______________________________________________________________________ Wenn Gott gewollt haette, dass E-Mail in HTML geschrieben wuerden, endeten Gebete traditionell mit </amen>. (Tom Listen)

3 3

[Dovecot] How to pull /var/mail mbox leftovers to Maildirs?
by Jeff Kowalczyk 04 Jul '08

04 Jul '08

I just got my preferred postfix+dovecot(-1.1.1) configuration working on Ubuntu 8.04 server. Users and Maildirs migrated, etc. I wasn't seeing inbound mail (in the email client) until I set: sudo postconf -e 'home_mailbox = Maildir/' Which I hadn't needed in the previous server's main.cf I have a few hours worth of inbound mostly-spam in /var/mail/(username) during the time I was figuring this out. What command line tools could I use to pull those message from the mboxes to the Maildirs? Thanks.

3 2

Re: [Dovecot] litte problems upgrade from 1.0.x to 1.1.1
by Andre Huebner 03 Jul '08

03 Jul '08

Hi, > These are created by the University of Washington's implementation of > an IMAP server. Notice the date is nearly 2 years ago. At some point, > it seems your site was running imap-uw. > > -- > Fred nope, i dont think so. i created completly new mailbox and mailed to it from extern. after deleting this mail using pop3-client same text was left in mbox but with current date. it must be dovecot related. we use dovecot from 1.0rc7 to 1.0.15 and never a case like this occured. also this machine had a lot of updates. now, by updating from 1.0.x (most 13) to 1.1.1 some users have this problem of retrieving ~1000 - ~2000 Mails with this internal message. The messages are from one to other moment in mbox, there is no delivering by postfix etc. this is completely new to me. Hmm.... If users asking i say it is a one time incident, but i do not really know... Thanks Andre

2 1

[Dovecot] I will chance the Sieve Path
by Benjamin Andreas 03 Jul '08

03 Jul '08

I open a Thread and i hope anybody can me explain my mistake I will chance the Sieve Path from my /home to another dir I use the LDA/Sieve wiki http://wiki.dovecot.org/LDA/Sieve but If i change the sieve path from sieve=~/.dovecot.sieve to sieve = /var/spool/sieve-scripts/%u/dovecot.sieve Dovecot search the .dovecot.sieve file continue in my home? and not in the new path # 1.1.1: /etc/dovecot/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.info protocols: imap imaps managesieve login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_location: maildir:/var/spool/imap/%u mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve sieve_storage(default): sieve_storage(imap): sieve_storage(managesieve): /var/spool/sieve-scripts/%u sieve(default): sieve(imap): sieve(managesieve): /var/spool/sieve-scripts/%u/dovecot.sieve auth default: passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix and here my dovecot log with mail_debug deliver(andreas): Jul 02 14:50:02 Info: Loading modules from directory: /usr/lib/dovecot/modules/lda deliver(andreas): Jul 02 14:50:02 Info: Module loaded: /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so deliver(andreas): Jul 02 14:50:02 Info: maildir: data=/var/spool/imap/andreas deliver(andreas): Jul 02 14:50:02 Info: maildir++: root=/var/spool/imap/andreas, index=, control=, inbox=/var/spool/imap/andreas deliver(andreas): Jul 02 14:50:02 Info: cmusieve: /home/susan/andreas/.dovecot.sieve doesn't exist deliver(andreas): Jul 02 14:50:02 Info: msgid=<b186cc8f0807020552m188b060dpeb95dd24e97d256d(a)mail.gmail.com>: saved mail to INBOX dovecot: Jul 02 14:50:21 Info: imap-login: Aborted login (auth failed, 1 attempts): method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured dovecot: Jul 02 14:51:11 Info: imap-login: Aborted login (auth failed, 1 attempts): method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured transtec3:/var/spool/sieve-scripts/andreas# dovecot -n # 1.1.1: /etc/dovecot/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.info protocols: imap imaps managesieve login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_location: maildir:/var/spool/imap/%u mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve sieve_storage(default): sieve_storage(imap): sieve_storage(managesieve): /var/spool/sieve-scripts/%u sieve(default): sieve(imap): sieve(managesieve): /var/spool/sieve-scripts/%u/dovecot.sieve auth default: passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix I need help because i cant find whats wrong with my config Regards Benjamin Andreas

1 0

[Dovecot] EXIM + Dovecot - Auth mechanism
by Proskurin Kirill 03 Jul '08

03 Jul '08

Hello all. Sorry for a lot of question - im making a new mail system now. Im wondering how to auth different MUA. For example Thunderbird & The Bat 4.x - CRAM-MD5 MS Outlook 2007 - DIGEST-MD5 Im create a 3 users and store passwords in LDAP using MD5-CRYPT(1), CRYPT(2) and MD5(3) - for tests. If im not use "secure connection" in thunderbird - im auth fine(plain text over SSL) but then im try to SMTP Auth by 1 and 2 user im got a error: "Requested CRAM-MD5 scheme, but we have only CRYPT" And after any auth in logs im have this: dovecot: Jul 03 13:31:47 Error: auth(default): BUG: Authentication client gave a PID 70487 of existing connection Then im try to auth by 3 user im got: "Requested CRAM-MD5 scheme, but we have only PLAIN-MD5" If thunderbird Then im try to Auth in Outlook im got a error too: auth(default): digest-md5(?,172.16.1.226): Invalid realm: domain.off What should im do to auth successful in this scheme? exim config: begin authenticators auth_plain: driver = dovecot public_name = PLAIN server_socket = /var/run/dovecot/auth-client server_set_id = $auth1 auth_login: driver = dovecot public_name = LOGIN server_socket = /var/run/dovecot/auth-client server_set_id = $auth1 auth_cram_md5: driver = dovecot public_name = CRAM-MD5 server_socket = /var/run/dovecot/auth-client server_set_id = $auth1 %dovecot -n # 1.1.1: /usr/local/etc/dovecot.conf base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot.log protocols: imap imaps pop3 pop3s ssl_cert_file: /usr/local/etc/certs/cert.crt ssl_key_file: /usr/local/etc/certs/cert.key ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_processes_count: 5 mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 verbose_proctitle: yes first_valid_gid: 0 mail_privileged_group: mail mail_uid: dmail mail_gid: dmail mail_location: maildir:/var/spool/dovecot/domains/%d/%n/ mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login cram-md5 digest-md5 user: dovecot-auth username_format: %Lu debug: yes passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: exim master: path: /var/run/dovecot/auth-master mode: 384 user: dovecot-auth -- Best Regards, Proskurin Kirill

1 1

[Dovecot] assertion failed: (seq >= t->first_new_seq && seq <= t->last_new_seq)
by Mark Zealey 03 Jul '08

03 Jul '08

Hi guys, Anyone know what this error with deliver is (v1.1.1)? 2008-07-03T09:45:19+01:00 mail4 deliver(alexander): Panic: file mail-index-transaction.c: line 642 (mail_index_transaction_lookup): assertion failed: (seq >= t->first_new_seq && seq <= t->last_new_seq) Seen a few of these this morning. Mark -- Mark Zealey -- Shared Hosting Team Leader Product Development * Webfusion 123-reg.co.uk, webfusion.co.uk, donhost.co.uk, supanames.co.uk This mail is subject to http://www.gxn.net/disclaimer

2 1