- dovecot - dovecot.org

[Dovecot] Quota handling - v2 - updated FR
by Charles Marcus 04 Jun '07

04 Jun '07

This revised proposal for a Feature Request is the result of my desire to implement quotas, but not have the attendant headaches that inevitably accompany its implementation. Ralf Hildebrandt wrote: > I have to face it, my users are retards: Is there any other kind of user? ;) <snip> > Thus I need a feature in dovecot that will tell them via email: > > Level1: "You ALMOST exceeded your quota, you're at 90% now" > Level2: "You're very close to exceededin your quota, you're at 95% > now" > Level3: "Would you please clean up now? You're at 99% now" What I'd *really* like to see implemented is something along the lines outlined below - but of course, this will depend entirely on whether or not Timo thinks it is doable - or desirable... I'm thinking this would be best handled by the Quota plug-in - either as part of the current one, or as a separate/different one... *** 1. Have a 'special' user-specific folder (by special, I mean like the Drafts, Sent, Templates folders) that dovecot controls. For purposes of this FR, call it the 'over-quota' folder. Question: could the .tmp folder be used for this? No sense in reinventing the wheel if necessary... and then if someone migrated from dovecot to something else, and messages were left in there from an over-quota condition, that other solution would most likely just move these to .new the first time it ran, right? Or, possibly, could dovecot create a new one maybe, .oqt (for over-quota), and store the queued messages there until the over-quota condition was rectified? Anyway, the main thing is, this folder should be essentially hidden from the user so they do *not* have access to it, and should temporarily hold messages that come in that are unable to be delivered due to an over-quota condition. *** 2. Make dovecot aware of and use a special 'Quota Status' message that it uses to inform a user that they are over quota. This message should be able to be customized, with variables (like, for example, it should list the messages that are currently being prevented from being moved to the Inbox - including, optionally, the Subject, the sender, date/time, attachments, size, etc - as well as provide general quota information (ie, how close to or over quota they are, and how much they'd need to delete or move to Local Folders to allow delivery of all of the messages being held), and lastly, any custom information the System Admin wanted to provide - like, maybe, specific instructions for how to move messages to Local Folders, how to request additional storage allowance, etc. *** 3. When user is over quota, have LDA deliver to the folder referenced above (# 1) - (yes, accept the message for final delivery from the sending mta), and then update the Quota Status message and move it to the Inbox. Optionally, a bounce/notification could be generated to the sender, informing them that their message is being 'held in queue' or something to that effect, due to the recipient being over-quota. *** 4. Once the user deletes enough mail to come back under quota, dovecot would then move messages from the 'over-quota' folder to his Inbox. Ok, again, am willing to hear *valid* reasons how/why this is a terrible idea... :) -- Best regards, Charles

6 10

[Dovecot] delivery and quota question
by Arkadiusz Miskiewicz 04 Jun '07

04 Jun '07

Hi, I'm considering using delivery for delivering emails. The question is about quota. Does delivery check quota for single maildir or for entire collection of user folders? Example: /var/mail/user/{new,cur,tmp} /var/mail/user/.Some_Folder/{new,cur,tmp} /var/mail/user/.Some_Other_Folder/{new,cur,tmp} Can I somehow get deliver checking size for all these folders? I need quota per user not per folder. -- Arkadiusz Miśkiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/

2 1

[Dovecot] Simple questions about Quota
by Venilton Junior 04 Jun '07

04 Jun '07

Hi folks, hope that get some help for some doubts :P I've configured dovecot in a clustered environment 3 X HP Proliant DL380+RHEL ES 4.0+EVA4000+GFS. Everything is working great. But, when I putted this cluster on production, I had some problems with quota+ldap in my dovecot. Here follows my configuration: /etc/dovecot.conf last_valid_gid = 101 maildir_copy_with_hardlinks = no login_greeting = Internet ready. disable_plaintext_auth = no auth_default_realm =domain.com.br protocol imap { mail_plugins = imap_quota quota } protocol lda { postmaster_address = postmaster(a)domain.com.br <mailto:postmaster@domain.com.br> mail_plugins = quota } protocol pop3 { pop3_uidl_format = %08Xu%08Xv mail_plugins = quota } auth default_with_listener { mechanisms = plain login userdb ldap { args = /etc/dovecot-ldap.conf } passdb ldap { args = /etc/dovecot-ldap.conf } socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } } } plugin { quota = maildir } /etc/dovecot-ldap.conf ... user_attrs = mail,homeDirectory,,,,quota=quota=maildir:storage user_filter = (&(objectClass=VirtualMailAccount)(mail=%u)(accountActive=TRUE)(delete=F ALSE)) I'm heaving heavy load of e-mails in this environment, so this problem started to happen: Almost all users have 100MB of quota, that's ok for us and we are storing 102400 at our ldap. But, when I put this configuration working on, all clients receive overquota messages. If I'm using quota information in my ldap server, do I have to use this option in my dovecot.conf file? plugin { quota = maildir } Tnx for any help and/or tips. Regards, Venilton C. Junior HP Certified Professional Sercompe Computadores Ltda. Office: +55 47 3431-9700 Fax: +55 47 3431-9747 Mobile: +55 47 9653-5872 www.sercompe.com.br <http://www.sercompe.com.br/>

2 1

[Dovecot] Dovecot and Seamonkey/Mozilla "delete attachment"
by Bryce Nesbitt 04 Jun '07

04 Jun '07

I'm having persistent trouble deleting larger attachments from messages in Mozilla/Seamonkey mail, and I'm thinking it may be related to Dovecot. A bug report is over at https://bugzilla.mozilla.org/show_bug.cgi?id=381759 I do not have the version number of Dovecot available, unless you know how to get it from the IMAP prompt: > telnet idiom.com 143 Trying 216.240.32.1... Connected to idiom.com. Escape character is '^]'. * OK Dovecot ready. How can I track this down more? Is anyone using Seamonkey and this particular new feature (delete the attachment, but keep the message body intact)?

2 1

[Dovecot] Error: no authentication failed
by gaoqiang.qian＠nokia.com 04 Jun '07

04 Jun '07

Hi, I have installed the dovecot on my redhat linux host. But when I log in with dovecot/test I got Error: no authentication failed after I got ok dovecot ready when I connect to local host. dovecot/test was set in the password.dovecot file. But I do not know how can I use this username and password in the configuration file. Could anyone give me a hand to let me know how to configurate the username and password for login. Thanks

2 1

[Dovecot] Overriding IMAP commands
by Tony Tsang 04 Jun '07

04 Jun '07

Hi all, I am writing a plugin to override some built-in imap commands. But when client logs out, imap segfaults during unregistering commands. What is the correct procedure for overriding imap commands in dovecot? Thanks. Tony Tsang.

2 1

Re: [Dovecot] Namespace Problems
by Kenny Dail 04 Jun '07

04 Jun '07

> Hi all, > > after an update from dovecot beta version to 1.0.0.-1 today morning I > had different effects: > thunderbird-, kmail-, Apple-clients, pine and squirrelmail could > receive email correct with imaps. But not MSOutlook!!! > Varying the namespace configurations in dovecot.conf I got different > results with MSOutlook working but with thunderbird, squirrelmail etc. > all folders are displayed but not the root Inbox etc. > Its important to know that I migrated from courier-imap to dovecot. > > My well working namespace config BEFORE upgrade to 1.0.0-1: > > Here my actual namespace configs: > > namespace private { > separator = > prefix = INBOX. > inbox = no > hidden = no > } > namespace private { > separator = / > prefix = INBOX/ > inbox = no > hidden = yes > } > namespace private { > separator = . > prefix = INBOX. > inbox = yes > hidden = yes > } > Try it using only one namespace which matches what you are really doing. With 1.0 this works for me with all clients I've tried, including Apple. namespace private { separator = . prefix = INBOX. inbox = yes hidden = no } > In varying inbox and hidden keywords I found this configuration. Most > things are working with this but in squirrelmal I can't access inbox, > the main folder. > > How do I have to configure that everythings works satisfying?? > > dovecot.conf and dovecot-sql.conf I send in the attachment. instead of sending dovecot.conf, next time use dovecot -n -- Kenny Dail <kend(a)amigo.net>

3 2

[Dovecot] Stop Maildir appending to path
by Henry 04 Jun '07

04 Jun '07

dovecot -n: # /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps ssl_listen: 208.xxx.xxx.xxx login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_extra_groups: mail mail_debug: yes auth default: passdb: driver: pam passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 master: path: /var/run/dovecot/auth-master mode: 384 user: vmail ---------------------- dovecot version: 1.0.rc15 ---------------------- Debian Etch (Stable) on AMD64

3 2

[Dovecot] What are they trying to do here?
by Jon Slater 04 Jun '07

04 Jun '07

Hi! I’m new to the list, and I’m not really having a ‘problem’, but I’m seeing something in my log files that I wonder if I should be concerned. I’ve been using Dovecot (dovecot-0.99.14-8.fc4) on my Fedora Core 4 (kernel 2.6.17-1.2142_FC4) machine from quite some time. For the last few days, I’ve been seeing this in my daily ‘Logwatch’ e-mail: dovecot: Authentication Failures: rhost= : 139 Time(s) root: 13 Time(s) Unknown Entries: check pass; user unknown: 139 Time(s) So it looks pretty obvious that someone (using root and an assortment of other login names) is trying to access by dovecot server. My first ‘issue’ is I can’t find a log file anywhere that tells me the IP address of the attacker. I see a series of ‘authentication failure’ messages in my /log/messages file: May 29 21:23:35 mydomainname dovecot(pam_unix)[15317]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= user=root May 29 21:23:35 mydomainname dovecot(pam_unix)[15318]: check pass; user unknown May 29 21:23:35 mydomainname dovecot(pam_unix)[15318]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= May 29 21:23:36 mydomainname dovecot(pam_unix)[15320]: check pass; user unknown May 29 21:23:36 mydomainname dovecot(pam_unix)[15320]: authentication failure; logname= uid=0 euid=0 tty= ruser= rhost= But I don’t find anything in any other log files to indicate where this is coming from. Secondly, I’m wondering if I have anything to be concerned about. Thanks in advance for you help! Jon No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.472 / Virus Database: 269.8.3/824 - Release Date: 5/29/2007 1:01 PM

2 1

[Dovecot] dovecot scaling issue?
by it-dovecot＠ml.epigenomics.com 04 Jun '07

04 Jun '07

Hi! We are running dovecot-imapd on Debian sarge out of the backports.org packages (version 1.0.rc15-1~bpo1). We have ~ 80 clients using secure IMAP. I understand that imap-login has to run for every SSL connection. Thus I already increased the max value for the number of imap-login processes. But unfortunately dovecot is unresponsive from time to time. Where can I tune the installation? Do I need to upgrade to 1.0.0, for which no backported packages exist for Debian sarge? This is the output of dovecot -n: log_timestamp: %Y-%m-%d %H:%M:%S listen: *:143 ssl_listen: *:993 ssl_cert_file: /etc/courier/imapd.pem ssl_key_file: /etc/courier/imapd.pem disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login login_processes_count: 12 login_max_processes_count: 512 verbose_proctitle: yes mail_location: maildir:~/.Maildir:INDEX=/var/cache/dovecot/INBOX.%u:CONTROL=/var/cache/dovecot/INBOX.%u mail_full_filesystem_access: yes maildir_stat_dirs: yes maildir_copy_with_hardlinks: yes namespace: type: private separator: . prefix: INBOX. inbox: yes namespace: type: public separator: . prefix: shared. location: maildir:~/.Maildir/shared:INDEX=/var/cache/dovecot/shared.%u:CONTROL=/var/cache/dovecot/shared.%u auth default: verbose: yes passdb: driver: passwd userdb: driver: passwd Homedirectories are on NFS, /var/cache/dovecot is a local filesystem. Clients are mostly Thunderbird, where max connection to IMAP server is set to 5. Greetings -- Robert Sander Senior Manager Information Systems Epigenomics AG Kleine Praesidentenstr. 1 10178 Berlin, Germany phone:+49-30-24345-0 fax:+49-30-24345-555 http://www.epigenomics.com robert.sander(a)epigenomics.com

2 1