- dovecot - dovecot.org

[Dovecot] Building 1.0beta8 on Solaris
by Matthieu Herrb 18 May '06

18 May '06

The following patch is needed on Solaris, because <sys/stat.h> has a specific macro definition for struct stat. Without this patch the prototype for nfs_safe_stat() changes between the inclusion of nfs-workarounds.h and the definition of the function. -- Matthieu Herrb

2 2

[Dovecot] building 1.0beta8 with gcc 2.95
by Matthieu Herrb 18 May '06

18 May '06

The following patch is need to correctly align the default_settings structure with gcc 2.95, which doesn't recognise C99 style struct initializers. --- src/master/master-settings.c~ 2006-04-25 04:00:07.000000000 +0200 +++ src/master/master-settings.c 2006-05-18 11:14:08.949376000 +0200 @@ -367,6 +367,7 @@ /* .. */ MEMBER(login_uid) 0, + MEMBER(imap_generated_capability) NULL, MEMBER(listen_fd) -1, MEMBER(ssl_listen_fd) -1 }; -- Matthieu Herrb

1 0

[Dovecot] maildir-tags
by Marten Lehmann 17 May '06

17 May '06

Hello, I configured my MTA to store messages in maildirs with a tag "S=$message_size", so quota calculations can be done without stat()ing the message file. However, I have a lot old messages, than haven't been stored with this tag. Is it possible to configure dovecot so that it will rename each file adding this messagesize-tag if it is not found in a file already? You can find more on this at http://www.exim.org/exim-html-4.62/doc/html/spec_html/ch26.html#id2634917 Regards Marten

2 1

[Dovecot] Re: kqueue cont'd
by Václav Haisman 17 May '06

17 May '06

Chris Cappuccio wrote: > So I just got one like this before a login: > > May 16 21:24:58 m1 dovecot: imap-login: Unrecognized event: kevent {.ident = 0, .filter = 0xffffffff, .flags = 0x0001, .fflags = 0x00000000, .data = 0x0000002b} > May 16 21:24:58 m1 dovecot: imap-login: mode: 0x004x > May 16 21:24:58 m1 dovecot: child 10716 (login) killed with signal 6 > > The OpenBSD port runs configure with these arguments: > > CONFIGURE_ARGS+=--localstatedir=/var \ > --with-ioloop=kqueue \ > --with-notify=kqueue \ > --with-ssl=openssl \ > --with-ssldir=/etc/ssl \ > --without-pam \ > --without-shadow \ > --without-vpopmail Thanks for the report. I am aware of the problem but I haven't had enough time lately to fix it. In the mean time if it bothers you, you can remove --with-ioloop=kqueue and use poll. The other kqueue option, --with-notify=kqueue, is independent of the first one and can still be used. -- Vaclav Haisman

1 0

[Dovecot] dovecot
by Oleg D. 17 May '06

17 May '06

The old version was 1.0b3 from freebsd ports and all works fine. When I have upgrade freebsd ports and install a new 1.0b8 I see this error. Before I have installed a new version I have "make deinstall" all 1.0b3 package. (dovecot.conf was old with "ssl_disable = yes") Later I have add --without-ssl in port's Makefile and compile dovecot without ssl. But I have all the same seen "pop3-login: BUG: SSL..." When I have set "ssl_disable = no" I saw another error: "Error: SSL support not compiled in but ssl_disable=no" TS> On Tue, 2006-05-16 at 01:29 +0400, Oleg D. wrote: >> Hi >> >> I used dovecot 1.0b3 without ssl (FreeBSD) >> I just upgrage dovecot to new 1.0b8 with the same config file >> and I have this error in log: >> pop3-login: BUG: SSL initialization parameters not given while they should have been >> >> p.s >> In my dovecot.conf I have option "ssl_disable = yes" TS> What was the old version you used? Are you sure you upgraded all of the TS> binaries? I think this error usually happens when some of your binaries TS> are from older Dovecot installation while others are from newer.

1 0

[Dovecot] Horde/IMP setup
by Eric 16 May '06

16 May '06

does anyone else use Horde/IMP that can share their servers.php setup? I am getting weird behavior with IMP not showing my INBOX and sub folders, etc. and i am not sure if its an IMP issue or Dovecot. It was giving me problems yesterday, then it cleared up, but now its acting up again. mail clients like Thunderbird work fine tho. I am seeing this in the logs a lot: [Tue May 16 08:08:21 2006] [error] [client 67.133.211.52] PHP Warning: Invalid argument supplied for foreach() in /usr/local/www/horde/imp/lib/IMP.php on line 1197, referer: https://mikestammer.com/horde/services/portal/sidebar.php Line 1197 looks like this: foreach ($_SESSION['imp']['namespace'] as $key => $val) { if (!empty($key) && (strpos($mailbox, $key) === 0)) { $cache[$key][$mailbox] = $val; return $val; } } Anyone have any tips or ideas?

5 6

[Dovecot] Solaris 10 x64 - crash report
by Rob Shepherd 16 May '06

16 May '06

Dear dovecot-devel I have a newly built dovecot-1.0.beta8 crashing at start May 16 11:11:33 zorch dovecot: [ID 475045 mail.info] Dovecot v1.0.beta8 starting up May 16 11:11:34 zorch dovecot: [ID 920869 mail.error] Login process died too early - shutting down May 16 11:11:34 zorch dovecot: [ID 684838 mail.error] child 28853 (login) killed with signal 11 Built on Solaris 10u1 x64 with Studio11 sun compiler, using LDFLAGS=-L/opt/csw/lib -R/opt/csw/lib -lssl CPPFLAGS=-I/opt/csw/include ./configure --prefix=/usr/local/dovecot-1.0.beta8 --with-ldap which begat [12:40:20][root@zorch:/usr/local/dovecot-1.0.beta8/libexec/dovecot]$ ldd dovecot-auth libssl.so.0.9.8 => /opt/csw/lib/libssl.so.0.9.8 libcrypt_i.so.1 => /usr/lib/libcrypt_i.so.1 libpam.so.1 => /lib/libpam.so.1 libldap-2.3.so.0 => /opt/csw/lib/libldap-2.3.so.0 libsocket.so.1 => /lib/libsocket.so.1 libnsl.so.1 => /lib/libnsl.so.1 librt.so.1 => /lib/librt.so.1 libsendfile.so.1 => /lib/libsendfile.so.1 libc.so.1 => /lib/libc.so.1 libcrypto.so.0.9.8 => /opt/csw/lib/libcrypto.so.0.9.8 libdl.so.1 => /lib/libdl.so.1 libgen.so.1 => /lib/libgen.so.1 libcmd.so.1 => /lib/libcmd.so.1 liblber-2.3.so.0 => /opt/csw/lib/pentium/liblber-2.3.so.0 libresolv.so.2 => /lib/libresolv.so.2 libnet.so => /opt/csw/lib/i386/libnet.so libsasl2.so.2 => /opt/csw/lib/i386/libsasl2.so.2 libssl.so.0.9.8 => /opt/csw/lib/pentium/libssl.so.0.9.8 libcrypto.so.0.9.8 => /opt/csw/lib/pentium/libcrypto.so.0.9.8 libmp.so.2 => /lib/libmp.so.2 libmd5.so.1 => /lib/libmd5.so.1 libscf.so.1 => /lib/libscf.so.1 libaio.so.1 => /lib/libaio.so.1 libdoor.so.1 => /lib/libdoor.so.1 libuutil.so.1 => /lib/libuutil.so.1 libm.so.2 => /lib/libm.so.2 which is run using this grep -v '#'ed conf file > protocols = imap > ssl_disable = yes > login_user = dovecot > mail_debug = yes > default_mail_env = maildir:~/.maildir > protocol imap { > listen = *:145 > imap_client_workarounds = outlook-idle > } > > protocol pop3 { > } > auth_verbose = yes > auth_debug = yes > auth_debug_passwords = yes > auth default { > mechanisms = plain > passdb pam { > } > passdb ldap { > args = /usr/local/dovecot-1.0.beta8/etc/dovecot-ldap.conf > } > userdb passwd { > } > userdb ldap { > args = /usr/local/dovecot-1.0.beta8/etc/dovecot-ldap.conf > } > user = root > } > plugin { > } which begat -rw------- 1 root root 4212175 May 16 12:15 /usr/local/dovecot-1.0.beta8/var/run/dovecot/core I notice in the configure script, that it's building with the system ldap.h, which I don't think is openldap. however the bin is linked to the lib from blastwave.org which is openldap. How can I specify the correct inc/lib pair? if this is indeed the problem. Please tell me how to produce a backtrace if one is needed if this is an actual bug..... Cheers Rob -- Rob Shepherd | Computer and Network Engineer | Technium CAST | LL57 4HJ rob(a)techniumcast.com | 01248 671928 | 07776 210516

2 1

[Dovecot] Authentication Daemons
by Scott Penrose 15 May '06

15 May '06

Hi ho. My name is Scott Penrose - and I am experimenting with Dovecot as an IMAP replacement in our company. I have spent some time trying to write a plugin (sort of) for authentication and come to the conclusion that our instance is a little strange. So I though I would try plan B which is to write my own authentication module. This seems to have worked fairly well to start with but I have had some problems. For example, when connecting with a simple socket client (I have a socket client equiv of telnet) I see the VERSION, MECH ... DONE from the login/default socket, but nothing from the master socket. Both should be returning VERSION. Any ideas on that one? Thanks Scott

1 0

[Dovecot] Dovecot + Sendmail + virtusertable
by Chris Tata 15 May '06

15 May '06

Hello, I was wondering if there was a way to have dovecot authenticate using sendmail's virtusertable to map virtual users to system users. My goal is to allow virtual users (bob(a)domain.com) to authenticate via pop or imap using the full user@domain scheme. I tried enabling 'vpopmail' as passdb and userdb in the default namespace but I get this error: dovecot: May 15 23:05:21 Error: auth(default): Unknown passdb type 'vpopmail' Please advise. Thanks, Chris

1 0

[Dovecot] Missing mails after folder renaming
by Bob & Sabine von Knobloch 15 May '06

15 May '06

Dear List, I seem to have created myself a problem to which I can't find an answer. I am using Dovecot (0.99.13-4.FC2 on Fedora Core 2) with Mozilla Thunderbird on Windows XP and Linux as IMAP client software. I renamed a folder to a name that included spaces (it fitted the pupose better), then later realised that I would have to change my procmail rules to suit. As I wasn't sure what procmail would do with such folder names I renamed the folder back to it's original short name (all this changing was done in Thunderbird). The result is that all subfolders under the renamed folder exist in both forms: eg "Computer.SubjectA" and "Computer Projects.SubjectA", but the second versions are not seen by Thunderbird although they contain all my old mails (new mails are correctly delivered to the short name folders). I have tried to move the mails in these folders back to the short name folders but the indexing system (I assume) does not 'see' these maildir files. How can I fool the system into seeing all the old mails? Of course, I would like to know why the second renaming didn't work but don't have enough information to know if it's Thunderbird or Dovecot that isn't working correctly. As a second question, my Windows clients run in an NT domain (Samba) with roaming user profiles. The pathnames for some users become quite long and Windows throws a 'path too long' error when saving/loading the user profile from the DC. Is there a way of limiting the depth of folder nesting under Dovecot to avoid this problem? I have tried to search for answers but haven't found any yet. If there is already some information, I would be glad of a pointer to it. I am very pleased with the performance of Dovecot in all respects, thanks for the program. Bob von Knobloch.

4 3