- dovecot - dovecot.org

[Dovecot] Need Help About My Problem ( Dovecot / Postfix / MySQL / Postfixadmin )
by Pratchaya Chatuphian 28 Jul '05

28 Jul '05

Dear , Dovecot List ( Everyone ) I have some problem about dovecot/postfix/mysql Would u like to tell me about the solution ? sir Thank you very much for advance. Sir Best Regards, Pratchaya ================================== ================================== ================================== This is my problem/error sir 1. ERROR = "" A NO "" and 2. ERROR = "" -ERR No INBOX for user. " I run Dovecot + Postfix + Postfixadmin + MySQL When i work with command line .. i have problem like this ( When i 'm in command line ) ##############################*###### [root@server etc]# telnet localhost 143 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. * OK dovecot ready. A LOGIN test...(a)pepocono.com 123456 A OK Logged in. A SELECT inbox A NO A LOGOUT * BYE Logging out A OK Logout completed. Connection closed by foreign host ##############################*###### [root@server etc]# telnet localhost 110 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. +OK dovecot ready. USER test...(a)pepocono.com +OK PASS 123456 +OK Logged in. -ERR No INBOX for user. Connection closed by foreign host. [root@jenus etc]# ##############################*####### My Config ==============================*======== dvecot.conf ==============================*======== default_mail_env = maildir:/var/mail/virtual/%1u/*%u/Maildir auth = plain auth_mechanisms = plain digest-md5 auth_userdb = mysql /usr/local/etc/dovecot-mysql.c*onf auth_passdb = mysql /usr/local/etc/dovecot-mysql.c*onf auth_user = mailusers ==============================*======== dvecot-mysql.conf ==============================*======== db_host = localhost db_unix_socket = /var/lib/mysql/mysql.sock db = postfix db_user = postfix db_passwd = postfix db_client_flags = 0 password_query = SELECT password FROM mailbox WHERE username = '%u' #user_query = SELECT concat('/var/mail/virtual/', maildir) as home, 10000 as uid, 10000 as gid FROM mailbox WHERE username = '%u' #user_query = SELECT '10000' AS uid, '10000' AS gid FROM mailbox WHERE username = '%u' AND active = '1' #user_query = SELECT home, uid, gid FROM users WHERE user = '%u' user_query = SELECT home, uid, gid FROM users WHERE user = '%u' AND active = '1' ( i use all case #comment but it'doesn't work ) ==============================*======== main.cf ==============================*======== virtual_mailbox_base = /var/mail/virtual virtual_mailbox_domains = mysql:/etc/postfix/postfixmysq*l/mysql_virtual_domains_maps.c*f virtual_mailbox_limit = 51200000 virtual_mailbox_maps = mysql:/etc/postfix/postfixmysq*l/mysql_virtual_mailbox_maps.c*f virtual_alias_domains = $virtual_alias_maps virtual_minimum_uid = 10000 virtual_uid_maps = static:10000 virtual_gid_maps = static:10000 # Additional for quota support virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = mysql:/etc/postfix/postfixmysq*l/mysql_virtual_mailbox_limit_*maps.cf virtual_mailbox_limit_override = yes virtual_maildir_limit_message = Sorry, the user's maildir has overdrawn his diskspace quota, please try again later. virtual_overquota_bounce = yes ========================= Note ( more information ) :: ========================= mailusers uid=10000 gid = 10000 home = /var/mail/virtual

1 0

[Dovecot] Preventing IMAP folder removal?
by John R. Dennison 28 Jul '05

28 Jul '05

Is there a way to configure Dovecut (version: dovecot-stable) to prevent the removal of an IMAP folder? We are planning on rolling out the @Mail webmail client to our user base in the next few weeks. This package has an internal Spam folder that we use to deliver spam into to allow our users to get to both their main mailbox and also their spam repository in one location. We are a Maildir shop, so the folder appears as: '~username/Maildir/..Spam' We want to use a sym-link to point '..Spam' to a location on another filesystem. Our testing shows that dovecot will happily follow a sym-link properly and no badness occurs as a result. Our concern, however, is that a user will attempt to remove their Spam folder, which will break the symlink and the next time a spam message is delivered the folder will be re-created as a directory and will reside on the same filesystem as their Maildir. Preventing the removal of the folder would be the easiest solution. If such a restriction is not already present in dovecot, might something be added to allow admins to lock down removal of folders? If this question has already been asked and answered on the list I apologize - I did quickly browse some of the back list and did not see a reference to the topic, but I admit, I may have missed it. Thank you in advance, John -- "I'm sorry but our engineers do not have phones." As stated by a Network Solutions Customer Service representative when asked to be put through to an engineer. "My other computer is your windows box." Ralf Hildebrandt

4 3

[Dovecot] Index File Permissions - Perhaps feature Request
by Marc Perkel 27 Jul '05

27 Jul '05

Trying an experiment to put the index files on a different volume than the mailbox files The idea being that the mailbox files are in a limited space slow raid1 array and the index files are somewhere else that is fast and not backed up. I'm using a virtual file structure as follows: /vhome/%d/home/%n The index files are set to: /nobackup/indexes/%d/%n Upon startup it created the index files correctly making all the missing directories. But I have an issue with the permissions. The problem is that it works for the first user, but the second user will have a permission error on the /%d/ level because of the 700 permissions. So - I would like to specify that directories that are automatically created have 770 permissions instead of 700, and, that perhaps I might want to ser the group permissions to 660 instead of 600. This might make Dovecot more ready for shared mailboxes in the future.

1 1

[Dovecot] Master Password Setup
by Marc Perkel 27 Jul '05

27 Jul '05

This should be easy but can someone tell me how to do this. I want to set up a master password to read anyone's email account for tech support reasons. How would you do that?

2 1

[Dovecot] Dovecot, Postfix, Mysql and Virtual Users
by Andre Bunting 27 Jul '05

27 Jul '05

I have been reading up : http://wiki.dovecot.org/moin.cgi/DovecotPostgresql to create virtual users who can access the email. Can i follow these steps with a few changes to get to use mysql instead of Postgresql ? Also i dont know if u all can help.. but i have tried to do : SASL2 authentication configuration in main.cf(Postfix): smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous smtpd_sasl_local_domain = domain.org smtp_sasl_auth_enable = no And when i start postfix with these settings i get an error saying"invlaid boolean" .. can anyone help ? Regards, Andre

2 1

[Dovecot] Small Feature Dovecot Should Have
by Marc Perkel 27 Jul '05

27 Jul '05

There should be a config command that allows you to change the default ".subscriptions" file to ".mailboxlist" for WU-IMAP compatibility. Yes - I can rename them all but it would be handy for testing purposes and it should be trivial to add this feature. I'm still someone who is going to convert soon, but still testing and waiting for stability.

1 0

[Dovecot] Supporting charsets
by Armando Soto Baeza 27 Jul '05

27 Jul '05

Hi there! We are trying to use support for japanese language, but when composing in squirrelmail or while resending either in squirrel or in Outlook, we do not get the right symbols. The server and client PCs have all the required software. Indeed, we receive japanese written messages and can display them well. The problem arises when we resend or compose a message. In the squirrel configuration, we found that our imap has to support the charsets we want to use. The question is, how can we add this to dovecot. We are using release 0.99.14-1 on GNU Debian 3.1 r0 (sarge) Any idea? Thanks for helping -- Alta tecnologia para la empresa mexicana

2 1

[Dovecot] last access file for 1.0-stable?
by Jeff A. Earickson 26 Jul '05

26 Jul '05

Hi, I am almost ready to convert from UW-imap to dovecot 1.0 stable for my imap use. I hacked UW-imap to touch a file in the user's home directory so I can always tell the last time they used imap. My hack looks something like this: if(authenticated) { touchfile = (char *) malloc((strlen (home) + 15); sprintf(touchfile,"%s/.imapd.last",homedir); fd = open(touchfile,O_WRONLY|O_CREAT|O_TRUNC,0600); if(fd < 0) syslog (LOG_NOTICE|LOG_AUTH,"touchfile failed for %s:%s",user,strerror(errno)); else close(fd); free(touchfile); } Where to do this in the dovecot code? Is there something like this already available? I realize that the index/cache files contain last-access data, but if the cache files become corrupted and have to be removed, then this last-access information is lost. I would like something independent of the cache files. Advice please... Jeff Earickson Colby College

2 1

[Dovecot] Commercial support
by Timo Sirainen 26 Jul '05

26 Jul '05

1.0 release is slowly (but surely :) getting nearer and I'd like to be able to offer commercial support for it for those who want or need it. I have a few different plans for how to do that, but I haven't really decided yet what to do. So I thought I'd ask a few questions here to see how much interest there is currently, which could help me make some decisions sooner. You should probably reply privately to me so this list won't get spammed. So, assume that Dovecot v1.0 will really be stable, will have real documentation, and the support isn't going to be completely in hands of just one or two guys. I think there would basically be two types of support available: 1. Basic support Guaranteed replies to questions within some time interval. - what response times? a few days? - phone support needed? - what would you be willing to pay for it? 2. Mission critical support For those who *really* can't afford any unexpected downtime, and so would be willing to pay more for quick response times. Problems divided to different categories (eg. normal, high, critical) with different response times. - what response times? a few days for normal, about one day for high, less for critical? - sanctions? - customized modifications, kept up-to-date for new Dovecot versions? - what would you be willing to pay for it? I'm not sure if there should be "outsourced email server maintenance" option too. Or maybe some really low cost support for a limited number of questions. Any other ideas, suggestions or tips? Did I miss something important? And finally, would you like to have a job related to Dovecot? :)

2 1

[Dovecot] virtual mailboxes with postfix
by David Cake 26 Jul '05

26 Jul '05

I have set up postfix with virtual mailboxes stored via mysql, and using postfixadmin, and dovecot as pop/imap server My postfix and mysql setup are pretty much standard for postfixadmin, as described here <http://postfixwiki.org/index.php?title=Virtual_Users_and_Domains_with_Couri…> (except for the parts about courier-imap.) Everything appears to be working fine except actually checking and authenticating mail via dovecot. I am fairly sure all I really need is the appropriate incantations in /etc/dovecot/dovecot.conf and dovecot-mysql.conf - does anyone have this set up and working? I should add that I want to allow both virtual mailboxes, and also local accounts, so I presumably need to support two different kinds of authentication. Regards David

2 1